SPL 95
SPL 125
Download from Www.Somanuals.com. All Manuals Search And Download.
ቢ
ቤ
ባ
ብ
ቦ
ቧ
ቢ
B
A
C
D
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Customer,
Thank you for buying a Fellowes SPL laminator, a product dedicat-
ed to the needs of high-volume users. Thanks to advanced heating-
roller technology and new user-friendly design, SPL laminators will
enable you to process work in record time and with consistently pro-
fessional results. We know of no laminators on the market today that
offer you more value in this product category.
If you have any questions or wish to comment on this product, we
welcome your call, email or letter.
Sincerely,
James Fellowes
Chairman & CEO
Contents
Product Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Profile
The SPL 95, and the SPL 125 are heavy-duty lami-
nators designed for daily office or commercial use.
In addition to processing standard pouches of every
thickness, SPL laminators take standard mounting
boards for durable point-of-sale displays. To give
professional users the precision they need, all SPL
models also offer degree-by-degree temperature adjustment and nine speed options on easy-
to-read digital displays.
Here is an overview of SPL laminator capacity, capabilities and special features:
OVERVIEW
Capacity
SPL 95
SPL 125
–Pouch width: Max.
DIN size
A4
26
10-3/16
A3
33
13
centimeters (document)
inches
–Pouch thickness: Min.-Max.
microns
80-250
3-10
80-250
3-10
mils
–Paper thickness: Max.
gr
lbs
300
80
300
80
–Entry width
millimeters
inches
3.5
3/16
3.5
3/16
Warm-up time in minutes :
90° C / 194° F (lowest)
140° C / 284° F (highest)
3
8
3
8
Processing speed in cm/inch per min.
Speed 1 (lowest)
Speed 9 (highest)
29/11
90/35
29/11
90/35
Reverse mode
ꢀ
ꢀ
Automatic shut off
ꢀ
ꢀ
Because SPL laminators are designed to take mounting board, the entry is wide enough to
accommodate pouches containing paper much thicker than the 300 gram (80 lbs) maximum
recommended above. While filling the pouch to the limits of the entry will not damage your
machine, you may not be satisfied with the quality of the results.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
As with any electrical equipment:
• Keep it away from heat or water sources
• Plug it in near an easily accessible outlet
• Do not use it if damaged in any way
• Do not attempt to open or otherwise repair it
• Turn it off after each use, and
• Unplug it when not in use for an extended period.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-up
Using the illustration on the inside of the manual cover as a reference, attach the support tray
ቢ
to the back of the machine with the two screws included in the package
Operation
ባ
To begin laminating, plug in the machine and press the power button . On the control panel
ቤ
, which will cause the orange standby light D to go on.
, then press start
Hot Lamination
ብ
Using the guidelines
printed on the top of the machine:
•
Set temperature by pressing , which will cause the temperature light
The digital temperature display A will show 110° C if this is the first use, but otherwise will
to go on.
show the last temperature used. Press plus
or minus
until you see the temperature you
want. Note: Because even standard paper may vary in weight and some inks are heat sensitive,
you may have to use a somewhat higher or lower temperature – roughly 5° more or less – to
get optimum results.
•
Set speed by pressing
a second time, which will cause the speed light
The digital speed display B will show “4” if this is the first use, but otherwise will show the last
to go on.
speed used. Press plus
or minus
until you see the speed you want.
Then press forward L to start the rollers turning. Although the
laminator will warm up without the rollers in motion, this ensures
that the heat will be evenly distributed. As soon as the selected
temperature has been reached, the green ready light C will go
on. Allowing for a free margin of at least 3 mm (1/8 inch), on the
unsealed edges, insert the sealed edge of the pouch or mounting
ቦ
board into the entry , as shown at the right.
If you see the material is not going in straight and might get dam-
aged, use the reverse mode: Press stop I, then press and hold
reverse M until you have backed the material out of the entry
completely. Realign and press forward L to begin again.
ቧ
Remove your material from the support tray after it has cleared the exit . If you are finished
with the job, but plan to use the laminator again soon, press start to put it into the standby
mode. If you forget, it will switch itself into this mode after one hour of inactivity. Press start
ባ
again to resume work, or press the power button
to turn off the machine.
Cold Lamination
Using the same temperature and speed selection procedure as with hot lamination, lower the
temperature until the digital display is blank. The cold mode light
will go on at this point to
confirm the change in mode. Then select a speed of 5 or 6, depending on the contents and
pouch thickness.
Press forward L to start the rollers turning. (If the laminator is hot, you can accelerate the
cooling process by passing through the cleaning sheet included in the package and/or turning
up the roller speed to 7, 8 or 9.) When the green ready light C goes on, turn the speed back
to 5 or 6 if necessary, then:
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Lay contents face up on the transparent, non-adhesive side of
a specially designed cold lamination pouch, but do not close the
pouch
Insert full length of sealed pouch edge into the entry, as
shown, while bending the protective sheet backwards over the
machine and grasping its free edge
Continue holding the protective sheet, which will peel away as
the pouch is drawn through the machine.
If you see the pouch is not going in straight and might get dam-
aged, use the reverse mode, as described under HotLamination.
Maintenance
To keep your laminator free of adhesives that could hurt the quality of your work, clean the
rollers regularly:
• Select temperature 140° C if it is not already on this setting
• Wait for the readiness light and signal, if necessary
• Insert the cleaning sheet included in the package, repeating one or two times
• Insert a plain white sheet of paper to test for remaining traces, and
• Reinsert the cleaning sheet, if necessary, and retest.
To clean the exterior of your machine, wipe with a soft cloth dampened with plain water.
Troubleshooting
If you are not getting the quality you should be, you can probably solve the problem quickly.
If, for example, your end product is:
•
•
Cloudy - Reduce the speed and pass it through again. If the sheet is still not completely
transparent, increase the temperature in increments of 5°.
Wavy - For the next pouch, increase the speed and/or reduce the temperature in increments of
5°. Passing through the cleaning sheet or turning up the speed will help cool down the rollers.
The green ready light C will reappear as soon as the lower temperature has been reached.
Spotted - Follow the cleaning procedure described under Maintenance to remove traces of
adhesive.
Open on edges - Next time make sure the contents are at least 3 mm (1/8 inch), from the
unsealed edges of the pouch.
•
•
If the pouch or mounting board is not going in straight or gets stuck in the rollers, use the
reverse mode, as described under Hot Lamination.
If you have questions or problems with your laminator that you cannot solve, please contact us
through one of the many channels listed under Customer Service. For your safety, do not
attempt to open or otherwise repair your machine.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Service
We offer a toll-free help line for customers living in the United States, Canada, Mexico and
Australia. If you live outside these regions or are otherwise unable to use our help line, please
call the Fellowes location nearest you, send a letter or email, or contact your local dealer. All of
our customer service phone numbers and other points of contact are listed on the back of this
manual.
Limited Warranty
Fellowes, Inc. warrants all parts of the machine to be free of defects in material and workman-
ship for 1 year from the date of purchase by the original consumer. If any part is found to be
defective during the warranty period, your sole and exclusive remedy will be repair or replace-
ment, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair.
ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT.
This warranty gives you specific legal rights. You may have other legal rights that vary from this
warranty. The duration, terms and conditions of this warranty are valid worldwide, except where
different limitations, restrictions or conditions may be imposed by local law.
For service under this warranty, please contact us (see back cover) or your dealer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Help Line
Fellowes
Australia
Canada
+ 1-800-33-11-77
+ 1-800-665-4339
+ 1-800-234-1185
+ 1-800-955-0959
México
United States
Australia
Benelux
+ 61-3-8336-9700
+ 31-(0)-347-377988
+ 1-905-475-6320
Canada
Deutschland
France
+ 49-(0)-5131-49770
+ 33-(0)-1-30-06-86-80
+ 39-(0)-71-730041
+ 81-(0)-3-5496-2401
+ 82-(0)-2-3462-2884
+ 60-(0)-35122-1231
+ 48-(0)-22-837-7356
+ 65-6221-3811
Italia
Japan
Korea
Malaysia
Polska
Singapore
United Kingdom
+ 44-(0)-1302-836836
© 2003 Fellowes, Inc. Printed in China. Form No. 400415B
Download from Www.Somanuals.com. All Manuals Search And Download.
|