Owner's Manual
ZC350MS8
DIGITAL VIDEO DISC RECORDER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2007 Funai Electric Co., Ltd.
E7H51UD.indd
1
2007/02/19 18:23:21
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig.
A)
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of the
loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
sold with the product. Any mounting of
the appliance should follow the
manufacturer’s instructions and should
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
use a mounting accessory recommended
by the manufacturer. An appliance and
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
product.
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have
been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your appliance dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance
this indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA No. 70, provides
EN
3
E7H51UD.indd
3
2007/02/19 18:23:22
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Installation Location
Supplied Accessories
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
remote control (NB553UD) with batteries (AAAx2)
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
RF coaxial cable (WPZ0901TM002)
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place or
after heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry.
owner's manual (1VMN23563)
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
quick guide (1VMN23564)
Notice for Progressive Scan Output
Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case
of picture problems with 525 progressive scan output,
it is recommended that the user switch the connection
to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p DVD
player, please contact our customer service center.
blank media DVD+R (16x) disc (KDDZZZZMB006)
4
EN
E7H51UD.indd
4
2007/02/19 18:23:22
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
Disc handling
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 86-90 before returning the product.
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn off, unplug the power plug and
please call our help line mentioned on the front page
to locate an Authorized Service Center.
• Always store the disc in its protective case when it is
not used.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
Cleaning the cabinet
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
•
With an AM radio:
Cleaning discs
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
•
With a digital camera (including built-in
camera of cellular phone):
Cleaning the disc lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Direct a digital camera to remote control,
press and hold a button on remote control.
If infrared light appears through digital
camera, the remote control is working.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD
discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher
video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back
on all DVD-video players.”
Note: This is true when the players are compatible with actual recordable DVD discs.
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
5
E7H51UD.indd
5
2007/02/19 18:23:22
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playing Back an Audio CD and a CD-RW/-R
Introduction
with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 52
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 53
Skipping TV Commercials During Playback. . . . . . . . . 53
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 54
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . 58
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 60
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 60
Switching Virtual Surround System . . . . . . . . . . . . . . . . 61
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 61
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 12
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 13
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 14
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 16
Basic Setup
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 17
On-Screen Display / Menu. . . . . . . . . . . . . . . . . . . . . . . . . 17
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 21
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 25
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Editing
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 62
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 69
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 72
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 74
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 31
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 32
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 33
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 38
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 39
Overwriting from the Beginning of the Title. . . . . . . . 39
Overwriting in the Middle of the Title. . . . . . . . . . . . . . 39
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 41
Connection to an External Device. . . . . . . . . . . . . . . . . . 41
Recording from an External Device . . . . . . . . . . . . . . . . 42
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 43
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 44
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Function Setup
LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . 90
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 46
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 49
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
6
EN
E7H51UD.indd
6
2007/02/19 18:23:23
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that.
The following features are offered with this unit.
Recording
Compatibility
This unit is compatible with DVD+RW/DVD-RW, which is
rewritable repeatedly and DVD+R/DVD-R, which is avail-
able for recording once. You can choose either one for your
convenience. Even if you choose DVD-RW/-R, these discs will
automatically be recorded in the DVD+VR mode.
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance. For DVD-RW/-R,
you need to finalize the recorded discs to play back on other
DVD players.
Up to 12 program recording:
You can program the unit to record up to 12 programs within
a one-month period. Daily or weekly program recordings are
also available.
One-touch timer recording (OTR):
Others
Progressive scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
You can easily set a recording time as you prefer. Every
time [RECORD] or [REC I] is pressed during recording, the
recording time will be increased by 30 minutes up to 6 hours.
The recording automatically stops when the recording time
you set is reached or the disc is full.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Symbols Used in this Owner's Manual
Automatic title list making:
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in the
disc (refer to page 73).
The unit makes a title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically (the input from
the E2 only).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Playback
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which
is compatible with Dolby Digital, you can experience the theat-
er surround sound from discs with surround sound system.
Symbol Description
For Recording, Playing Back, and Editing
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
For Playback only
Playing back MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
Description refers to DVD-video
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Dividing titles:
You can divide a title into 2 or more.
Putting name on disc:
You can put your favorite disc name.
EN
7
E7H51UD.indd
7
2007/02/19 18:23:23
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
4 5* 6
7
10 9
8
14 13 12 11
( ) The unit can also be turned on by pressing these buttons.
*
1. Disc tray
9. VIDEO input jack (E2)
Use to connect external device with a RCA video
cable.
Place a disc when opening the disc tray.
2. OPEN/CLOSE A button*
Press to open or close the disc tray.
10.S-VIDEO input jack (E2)
3. CHANNEL
Press to change the channel up and down.
4. STOP C button
/
buttons
Use to connect the S-video output of external device
with an S-video cable.
11.Infrared sensor window
Press to stop playback or recording.
5. PLAY B button*
Press to start or resume playback.
6. RECORD I button
Press once to start a recording. Press repeatedly to
start one-touch timer recording.
7. STANDBY-ON y button
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode.
Receive signals from your remote control so that you
can control the unit from a distance.
12.TIMER REC indicator
Lights up when timer programming is set.
Lights up during one-touch timer recording.
Flashes when all timer programmings have been
finished, or when a program cannot be performed by
some reason.
13.RECORD indicator
Lights up when recording function works.
14.POWER indicator
8. AUDIO input jacks (E2)
Use to connect external device with a RCA audio
cable.
Lights up when power is on.
8
EN
E7H51UD.indd
8
2007/02/19 18:23:23
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
1
2
3
4
IN
VIDEO VIDEO
IN OUT
Y
L
L
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
E1
11 10 9 8
7
6
5
1. ANTENNA IN jack
Use to connect an antenna.
2. VIDEO IN jack (E1)
8. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or other
device with a RCA audio cable.
Use to connect external device with a RCA video
cable.
3. VIDEO OUT jack
9. S-VIDEO IN jack (E1)
Use to connect the S-video output of external device
with an S-video cable.
Use to connect a TV monitor, AV receiver or other
device with a RCA video cable.
4. AC Power Cord
10.AUDIO IN jacks (E1)
Use to connect external device with a RCA audio
cable.
Connect to a standard AC outlet to supply power to
this unit.
5. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital decoder
or other device with a coaxial digital input jack with a
digital coaxial cable.
11.ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
6. S-VIDEO OUT jack
Note
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
7. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with a component video cable.
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
EN
9
E7H51UD.indd
9
2007/02/19 18:23:23
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
Open the cover.
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
Insert batteries.
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
2
16feet (5m)
30˚
23feet (7m)
16feet (5m)
30˚
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
STANDBY-ON
Close the cover.
1
16
2
SOURCE
DTV/TV
DISPLAY OPEN/CLOSE
A
3
17*
3
4
.@/:
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
5
6
7
18
19
20
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
21
Note
8
9
11
22*
24
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
j
F
i
C
B
23
25
10
h
g
CHANNEL
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
--
+
12
REC MODE
TIMER
AUDIO
26
27
28
13
14
15
REC
I
CM SKIP
RAPID PLAY
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
10 EN
E7H51UD.indd 10
2007/02/19 18:23:23
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
( ) The unit can also be turned on by pressing these buttons.
*
1. DISPLAY button
Press to display the display menu on or off.
2. DTV/TV button
Press to switch between digital TV mode (DTV) and
analog TV mode.
18.CLEAR button
Press to clear the password once entered or to can-
cel the programming for CD or to clear the selected
marker number, etc.
19.SETUP button
3. SOURCE button
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
Press to select the appropriate input.
4. Number/Character buttons
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the Setup
menu.
20.Cursor K / L / { / B buttons
Press to select items or settings.
21.RETURN button
• Press to enter title names.
5. Confirm ( • ) button
Press to return to the previously displayed menu
screen.
Analog mode:
22.PLAY B button*
Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
Press to start or resume playback.
23.NEXT G button
• During playback, press to skip to the next chapter,
track or file.
• When playback is paused, press to play back for-
ward step by step.
Press to confirm the major / minor channel selection
made by [the Number buttons].
6. DISC MENU button
Press to display the disc menu.
7. OK button
Press to confirm or select menu items.
8. TITLE button
Press to display the title list.
9. PREV H button
•During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is paused, press to play back reverse
step by step.
24.FFW D button
• During playback, press to play back fast forward.
• When playback is paused, press to play back slow
forward.
25.STOP C button
• Press to stop playback or recording.
• Press to exit from the title list.
26.TIMER button
Press to display the timer programming list.
27.AUDIO button
10.REW E button
Analog mode:
Press to display the audio menu during playback.
Digital mode:
• During playback, press to fast reverse.
• When playback is paused, press to play back slow
reverse.
• Press to switch the audio language in stop mode.
• Press to display the audio menu during playback.
28.RAPID PLAY button
11.PAUSE F button
Press to pause playback or recording.
12.CHANNEL
/
buttons
During playback, press to playback in a slightly fast-
er/slower mode with keeping the audio quality.
Press to change the channel up and down.
13.REC MODE button
Press to switch the recording mode.
14.REC I button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
15.CM SKIP button
During playback, press to skip 30 seconds.
16.STANDBY-ON y button
Press to turn the unit on and off. If timer program-
mings have been set, press to set the unit in timer-
standby mode.
17.OPEN/CLOSE A button*
Press to open or close the disc tray.
EN 11
E7H51UD.indd 11
2007/02/19 18:23:25
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
Disconnect the power cord of your TV from the AC outlet.
1
2
Disconnect RF coaxial cable from antenna input jack of your TV.
rear of your TV
VHF / UHF
antenna
2
1
disconnect
disconnect
or
ANT. IN
RF coaxial cable
cable TV
company
Connect cables to the unit.
Make the basic connection as illustrated below.
3
4
VHF / UHF
antenna
rear of this unit
IN
VIDEO VIDEO
IN
OUT
L
R
OUT
IN
S-VIDEO AUDIO OUT
AUDIO IN
(E1)
ANTENNA
IN
RF coaxial cable
VIDEO
OUT
or
L
cable TV
company
rear of your TV
RCA video
cable
R
OUT
AUDIO OUT
ANTENNA
This connection is for
TV loop through only
RCA audio
cable
RF coaxial cable
ANT. IN
R
L
AUDIO IN VIDEO IN
Plug in the power cord of this unit and your TV to the AC outlet.
rear of your TV
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
connect
*Once connections are completed, turn on the TV and
begin initial setting.
Channel scanning is necessary for the unit to memorize
all available channels in your area.
(Refer to “INITIAL SETTING” on page 19.)
L
O
TR
rear of this unit
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• Antenna out is for tuner pass through only. DVD playback through the RF is not possible.
12 EN
E7H51UD.indd 12
2007/02/19 18:23:25
Download from Www.Somanuals.com. All Manuals Search And Download.
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available
stereo audio/video RF modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
VHF / UHF
antenna
rear of this unit
IN
VIDEO VIDEO
IN
OUT
L
R
OUT
IN
S-VIDEO
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
(E1)
IN
RF coaxial cable
VIDEO
OUT
RCA video
cable
or
L
cable TV
company
rear of your TV
R
OUT
AUDIO OUT
ANTENNA
RCA audio cable
ANT. IN
rear of your RF modulator
(not supplied)
RF coaxial cable
RF coaxial cable
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
EN 13
E7H51UD.indd 13
2007/02/19 18:23:25
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A CABLE / SATELLITE BOX
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
e.g.)
rear of your TV
satellite
dish
This connection is for
TV loop through only
VIDEO IN AUDIO IN
R
L
or
ANT. IN
cable TV
company
RCA audio
cable
RCA video
cable
rear of this unit
RF coaxial cable
IN
VIDEO VIDEO
IN
OUT
L
R
IN
OUT
IN
S-VIDEO
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
ANTENNA
(
)
E1
RF coaxial cable
ANT. IN RF OUT
VIDEO VIDEO
IN
OUT
cable/satellite
box
Y
L
L
VIDEO
OUT
S-VIDEO
OUT
AUDIO OUT
OUT
PB/CB
R
L
ANTENNA
R
R
P
R/CR
IN
OUT
S-VIDEO
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
(
)
EL1
or
RCA video cable
RCA audio cable
S-video cable
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
14 EN
E7H51UD.indd 14
2007/02/19 18:23:26
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device.
Method 1
Method 2
Method 3
analog audio
standard picture
good picture
better picture
COMPONENT
VIDEO IN
VIDEO
IN
S-VIDEO IN
TV
Y
(Green)
AUDIO IN
R
L
PB/CB
(Blue)
PR/CR
(Red)
RCA audio
cable
RCA video
cable
S-video cable
component
video cable
and
or
or
(Green)
T
this unit
Y
L
(Blue)
VIDEO
OUT
IN
VIDEO VIDEO
IN
OUT
L
L
L
PB/CB
(Red)
R
R
OUT
IN
AUDIO IN
R
ANTENNA
S-VIDEO AUDIO OUT
(
)
E1
OUT
P
R/CR
AUDIO OUT
R
COMPONENT
VIDEO OUT
S-VIDEO
AUDIO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT
VIDEO OUTPUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original
remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your
TV owner’s manual for details.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT
jack.
To set progressive scan mode, refer to page 84
• This unit is compatible with the progressive scan system. The feature provides you with the higher quality images than the
traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.
EN 15
E7H51UD.indd 15
2007/02/19 18:23:27
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2 Channel Analog Audio Connection
stereo system
Digital Audio Connection
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
AUDIO IN
audio
R
L
analog audio
input jacks
digital audio
coaxial input jack
RCA audio cable
digital audio coaxial cable
VIDEO
OUT
L
IN
IN
VIDEO VIDEO
IN OUT
VIDEO VIDEO
IN OUT
Y
L
L
L
L
this unit
PB/CB
R
R
R
R
P
R/CR
OUT
IN
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
OUT
IN
AUDIO IN
COMPONENT
VIDEO OUT
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANTENNA
S-VIDEO AUDIO OUT
(
)
(
)
E1
E1
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
R
AUDIO OUT
AUDIO OUT
DIGITAL AUDIO OUTPUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Setting
Setup >General Setting >Playback >Disc Audio >
Dolby Digital
Connection
If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder.
Stream
Connecting to an MD deck or DAT deck.
If not connected to any external devices.
PCM
PCM
* To complete these settings, refer to page 79.
Note
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
16 EN
E7H51UD.indd 16
2007/02/19 18:23:27
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
On-Screen Display / Menu
The on-screen display changes in the following order
Disc Information / Menu
as you press [DISPLAY].
6
OFF
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
DTV Program Guide (only in DTV mode)
CH 10
5
1
2
Disc Information/Menu
Title Name Information
SP(2Hr)
1:53
(only when DVD+RW/DVD+R/DVD-RW/DVD-R
is in playback)
4
3
or
* This is an example screen only for explanation.
File Name Information
(only when a CD with MP3 files is in playback)
1. Indicates a disc type and format mode.
2. Indicates a channel number or selected external input
position.
3. Indicates a recording mode and possible recording
time left.
DTV Program Guide
4. Indicates an operation status.
5. Each icon means:
1
KABC
5
DTV 6.1
: Search
: Audio
: Subtitle
: Angle
: Marker
A Day of Memories
25
35
English 1/2
: Noise Reduction
: Zoom
A quarter-century ago, which may now
qualify as the good old days of
newspapering, run-of-paper sales
accounted for 80 percent of the
industry's advertising revenues.
45
: Surround
: Repeat
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
1. Broadcast station
2. Program title (max. 2 lines displayed)
3. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
4. Program guide (max. 6 lines displayed)
5. Channel number
Note
• This is an example screen only for explanation.
Displayed items are depending on the disc you
inserted.
Note
Title/File Name Information
• When the program guide is displayed in more than 7
lines, use [K / L] to scroll.
Title Name Information
• “No description provided” is displayed when the
program guide is not provided.
Title Name
My Title
1
File Name Information
File Name
My File
1
1. Displays title/file name.
EN 17
E7H51UD.indd 17
2007/02/19 18:23:28
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Main Menu
Press [SETUP] to display the main menu. Then use
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. Disc Edit:
To set up the DVD disc setting.
5. CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 files is inserted
into the unit.
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
of the unit.
Setup
General Setting
Timer Programming
Title List
Disc Edit
CD Playback Mode
General Setting Menu
1. Playback:
General Setting
1
2
3
4
5
26
37
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
Playback
Display
Video
Recording
Clock
Channel
Reset All
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. Reset All:
To reset the setting to the factory default.
Disc Edit / CD Playback Mode
1. Edit Disc Name:
<Disc Edit menu (DVD+RW)>
Allows you to rename the disc.
Disc Edit
1
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if
you have added or deleted chapters, or made chapters
hidden on this unit, and to effect it when playing back
on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
Allows you to select images or information on the menu
screen by activating PBC (playback control) function.
Edit Disc Name
Erase Disc
Make Edits Compatible
2
3
4
Disc Protect OFF
ON
<Disc Edit menu (DVD-RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
ON
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
23
34
Edit Disc Name
Finalize
Disc Protect OFF
ON
<CD Playback Mode menu>
CD Playback Mode
15
26
37
Random Play
Program Play
PBC (Video CD only)
18 EN
E7H51UD.indd 18
2007/02/19 18:23:28
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
Use [K / L] to select the type of
broadcasting signal, then press [OK].
STANDBY-ON
3
Initial Setup
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Channel Preset
Make sure the antenna is
1
GHI
4
2
JKL
5
3
MNO
6
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
The unit will start getting channels available in
your area.
.
0
DISC MENU
SETUP
Antenna:
o
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
s
B
OK
p
TITLE
RETURN
j
F
i
B
h
g
C
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
CHANNEL
--
+
REC MODE
TIMER
AUDIO
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
REC
I
CM SKIP
RAPID PLAY
CH
1
Auto Presetting Now
To cancel the auto channel preset during
scanning:
Press [RETURN] or [SETUP] to cancel.
Press [OK] to activate “Clock Setting”.
Initial Setup
4
5
Clock Setting
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
Press [STANDBY-ON y].
:
Turn the TV on. Select the input to
which the unit is connected.
1
2
Use [K / L] to select your desired
language, then press [OK] to set
language.
Proceed to step 5 in “Manual Clock
Setting” on page 24.
• If a PBS (public broadcasting station) is
available in your area, press [RETURN] or
[SETUP] to exit, then follow “Auto Clock
Setting” on page 23.
Initial Setup
OSD Language
English
Français
Español
EN 19
E7H51UD.indd 19
2007/02/19 18:23:29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
Press [SETUP] and use [K / L] to
select “General Setting”, then press
STANDBY-ON
1
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
“General Setting” menu will appear.
A
ABC
DEF
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
2
3
4
PQRS
TUV
WXYZ
7
8
9
CLEAR
Use [K / L] to select “Auto Channel
Preset”, then press [OK].
SPACE
.
0
DISC MENU
SETUP
o
Use [K / L] to select the type of
broadcasting signal, then press [OK].
s
B
OK
p
TITLE
RETURN
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
j
F
i
B
Auto Channel Preset
Manual Channel Preset
Auto Channel Preset
h
g
C
Antenna
Cable (Analog)
Cable (Analog / Digital)
CHANNEL
--
+
REC MODE
TIMER
AUDIO
REC
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
“Antenna”.
I
CM SKIP
RAPID PLAY
• When connected to CATV, select “Cable
(Analog)” or “Cable (Analog/Digital)”.
To cancel the auto channel preset during
scanning:
Press [RETURN] or [SETUP] to cancel.
When scanning is over, press [SETUP]
to exit.
5
To cycle through only the memorized channels, use
[CHANNEL
/
].
To select a channel directly (including the ones not
memorized), use [the Number buttons].
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
20 EN
E7H51UD.indd 20
2007/02/19 18:23:29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channel is only available for the analog TV
channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
1
2
Make sure
Press [SETUP] and use [K / L] to
select “General Setting”, then press
• You perform “Auto Channel Scan” before adding or
deleting the channels.
[OK].
“General Setting” menu will appear.
STANDBY-ON
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
3
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Manual Channel
Preset”, then press [OK].
4
General Setting
PQRS
TUV
WXYZ
Playback
7
8
9
CLEAR
Display
Video
Recording
Clock
Auto Channel Preset
Manual Channel Preset
TV Audio Select
SPACE
.
0
Channel
Reset All
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
• If you are adding or deleting analog TV/CATV
channels, go to to continue.
• If you are deleting digital TV/CATV channels, go
to to continue.
ANALOG
j
F
i
B
DIGITAL
h
g
C
CHANNEL
--
+
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Instructions continue on the next page.
EN 21
E7H51UD.indd 21
2007/02/19 18:23:29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
DIGITAL
ANALOG
Select the channel number to add or
delete.
Select the channel number to delete.
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [CHANNEL
/
] to cycle through only
5
5
6
the memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
• Use [CHANNEL
the memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
/
] to cycle through only
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K / L] to select “Add” or
“Delete”, then press [OK].
Use [K / L] to select “Delete”, then
press [OK]. Then select the next
channel to delete.
Manual Channel Preset
6
CH
2
• If the setting is complete, press [RETURN] to
Add
Delete
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV
2
(CH - - - )
Add
Delete
Press [SETUP] to exit.
Your setting will be activated.
7
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Press [SETUP] to exit.
7
22 EN
E7H51UD.indd 22
2007/02/19 18:23:30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 24.
Auto Clock Setting
This unit can set the time and date automatically by
Press [SETUP] and use [K / L] to
select “General Setting”, then press
referring to a PBS station.
Make sure
1
2
3
4
[OK].
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 23.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
STANDBY-ON
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Auto”, then
press [OK].
PQRS
TUV
WXYZ
General Setting
7
8
9
CLEAR
Playback
Display
Video
Recording
Clock
Channel
Reset All
Clock Setting
SPACE
etting
Auto Clock Setting
ng Time
.
0
OFF
Auto
Manual
DISC MENU
SETUP
o
s
B
OK
p
Press [SETUP] to exit.
TITLE
RETURN
5
6
j
F
i
B
Press [STANDBY-ON y] to turn off
h
g
C
the unit.
CHANNEL
This unit will search for the time only when the
power is off. Leave it off for several minutes to
give this unit time to set the clock.
--
+
REC MODE
TIMER
AUDIO
REC
I
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
CM SKIP
RAPID PLAY
Select “Manual” at step 4, then press
[OK].
1
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [OK].
2
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Note
Clock Setting
etting
Auto Clock Setting
• The clock may set itself automatically after you
connect the antenna/cable signal and plug in the
power cord.
ng Time
Set Channel No.
CH
1
• Only the analog PBS channel signal is effective for
auto clock setting.
• The unit receives the clock data at 12:00 a.m. / p.m.
from the PBS channel when the power is off.
Press [SETUP] and turn off the unit.
3
EN 23
E7H51UD.indd 23
2007/02/19 18:23:30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
“ON (MAR - NOV)” has been selected as the default.
1
[OK].
“General Setting” menu will appear.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
1
[OK].
2
3
4
“General Setting” menu will appear.
Use [K / L] to select “Clock Setting”,
then press [OK].
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
2
3
4
Use [K / L] to select calendar or time,
then press [OK].
Use [K / L] to select “Daylight Saving
Time”, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Clock Setting
ting
g Time
Clock Setting
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
then press [OK].
JAN / 01 / 2007 ( MON )
12 : 00 AM
General Setting
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK].
Playback
Display
Video
Recording
Clock
Channel
Reset All
Clock Setting
etting
Daylight Saving Time
ng Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
5
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Clock Setting
Auto Clock Setting
g Time
Clock Setting
ON (MAR - NOV):
JAN / 01 / 2007 ( MON )
12 : 00 AM
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
Your setting will be activated.
The clock start counting when you press [OK].
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
Press [SETUP] to exit.
6
Press [SETUP] to exit.
5
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2007
up to 2056.
24 EN
E7H51UD.indd 24
2007/02/19 18:23:30
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Digital TV Channels>
Switching Analog Mode /
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control and enjoy viewing the
HDTV (high definition TV) programs as well as the SDTV
(standard definition TV) programs.
e.g.) 2-2 ch:
major channel
minor channel
[0] + [2] or [2] + [•]
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 35-16ch:
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
major channel
minor channel
[3] + [5]
[1] + [6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Note
• When you switch the analog mode to the digital
mode, it may take about 10 seconds until the digital
channel selection is completed. The following screen
is displayed while switching the mode.
DTV 125. 1
Note
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
Now Scanning
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
Channel Selection
Select channels by using [CHANNEL
/
] or [the
What is the minor channel?
Number buttons] found on remote control.
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
[CHANNEL
/
]
Use [CHANNEL
/
] to change the channel.
[the Number buttons]
Press the channel number with [the Number buttons] to distinguishes between multiple channels broadcast by a
select a channel you want to watch.
signal network.
<Analog TV Channels>
[Air Time]
18:00
NTSC (analog mode)
ATSC (digital mode)
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
smallest smallest
CH4-1
CH
CH
18:30
19:00
19:30
20:00
e.g.) 2 ch:
[0] + [2], [2] + [•] or
CH4-1 CH4-2 CH4-3
smallest
[2] + leave it for 2 seconds.
CH4
For 2-digit number
e.g.) 12ch: [1] + [2]
CH4-1
CH4-3
CH
smallest
CH
CH4-1 CH4-2
minor channel
major channel
: change automatically
: change manually by using [CHANNEL
/
]
EN 25
E7H51UD.indd 25
2007/02/19 18:23:31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
Press [AUDIO] to cycle through
STANDBY-ON
available audio languages.
English 1/2
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
• When you press [AUDIO], selected language
will be displayed on the TV screen.
.
0
DISC MENU
SETUP
• Every time you press [AUDIO], the language
will be switched.
o
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3
s
B
OK
p
• Available languages differ depending on the
broadcast.
TITLE
RETURN
• The language information display will
automatically disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Note
• The timer recording for digital TV cannot record any
audio language other than English.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
26 EN
E7H51UD.indd 26
2007/02/19 18:23:31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
Press [SETUP] and use [K / L] to
select “General Setting”, then press
STANDBY-ON
1
[OK].
“General Setting” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
2
3
4
PQRS
TUV
WXYZ
7
8
9
Use [K / L] to select “TV Audio
Select”, then press [OK].
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
s
B
OK
p
TITLE
RETURN
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Auto Channel Preset
j
F
i
B
Manual Channel Preset
TV Audio Select
Stereo
SAP
h
g
C
CHANNEL
--
+
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Press [SETUP] to exit.
5
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
SAP
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
EN 27
E7H51UD.indd 27
2007/02/19 18:23:31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
STANDBY-ON
1
[OK].
“General Setting” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Display”, then
press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
PQRS
TUV
WXYZ
Use [K / L] to select “CC Style”, then
press [OK].
7
8
9
SPACE
CLEAR
.
0
3
General Setting
DISC MENU
SETUP
Playback
Display
Video
Recording
Clock
o
OSD Language
Screen Saver
CC Style
V-Chip
s
B
OK
p
Channel
Reset All
TITLE
RETURN
j
F
i
B
h
g
C
Use [K / L] to select “DTV CC”, then
press [OK].
CHANNEL
--
+
4
5
REC MODE
TIMER
AUDIO
General Setting
CC Style
Playback
Display
Video
Recording
Clock
age
er
DTV CC
User Setting
REC
I
Font Size
Font Style
CM SKIP
RAPID PLAY
Channel
Reset All
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
Use [K / L] to the desired DTV closed
caption, then press [OK].
General Setting
CC Style
Playback
Display
Video
Recording
Clock
DTV CCage
er
OFF
Service1
Service2
Channel
Reset All
Service3
Service4
Service5
Service6
Back Color
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
Note
• Even if you set “DTV CC” to anything other than
“OFF”, its effect will temporarily be canceled while
recording.
Press [SETUP] to exit.
6
28 EN
E7H51UD.indd 28
2007/02/19 18:23:31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [SETUP] and use [K / L] to
STANDBY-ON
select “General Setting”, then press
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
1
[OK].
A
“General Setting” menu will appear.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Display”, then
press [OK].
PQRS
TUV
WXYZ
2
7
8
9
SPACE
CLEAR
Use [K / L] to select “CC Style”, then
press [OK].
.
0
DISC MENU
SETUP
o
3
General Setting
Playback
Display
Video
Recording
Clock
OSD Language
Screen Saver
CC Style
s
B
OK
p
TITLE
RETURN
V-Chip
Channel
Reset All
j
F
i
B
h
g
C
CHANNEL
--
+
Use [K / L] to select “User Setting”,
then press [OK].
REC MODE
TIMER
AUDIO
4
5
General Setting
REC
CC Style
Playback
I
Display
Video
Recording
Clock
Channel
Reset All
age
DTV CC
CM SKIP
RAPID PLAY
er
User Setting
Font Size
Font Style
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
Use [K / L] to select “ON”, then press
[OK].
General Setting
CC Style
Playback
Display
Video
Recording
Clock
Channel
Reset All
age
DTV CC
er
User Setting
ON
OFF
Font Opacity
Font Color
Back Opacity
Back Color
Instructions continue on the next page.
EN 29
E7H51UD.indd 29
2007/02/19 18:23:31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [OK].
6
General Setting
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
CC Style
Playback
Display
Video
Recording
Clock
Channel
Reset All
age
er
DTV CC
User Setting
Font Opacity
Solid
• The setting description for each item is shown
below.
Translucent
Flash
Font Color
Back Opacity
Back Color
<Font Size>
Font size of the displayed caption can be
switched as below.
<Font Color>
Font color of the displayed caption can be
switched as below.
General Setting
CC Style
Playback
Display
Video
Recording
Clock
Channel
Reset All
ge
DTV CC
r
Font Size
General Setting
Middle
FontColor
Playback
Large
Display
Video
Recording
Clock
Channel
Reset All
age
Transparent
Small
er
White
Font Color
Back Opacity
Back Color
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Style>
Font style of the displayed caption can be
switched as below.
<Back Opacity>
Background opacity of the displayed caption can
be switched as below.
General Setting
FontStyle
Playback
Display
Video
Recording
Clock
Channel
Reset All
ge
Style1
r
Style2
General Setting
Style3
Style4
CC Style
Playback
Style5
Display
Video
Recording
Clock
Channel
Reset All
age
DTV CC
Style6
Style7
Style8
Back Color
er
User eting
Back Opacity
Solid
Translucent
Flash
Font Color
Back Opacity
Back Color
<Edge Type>
Edge type of the displayed caption can be
switched as below.
<Back Color>
Background color of the displayed caption can
be switched as below.
General Setting
CC Style
Playback
Display
Video
Recording
Clock
Channel
Reset All
Edge Typege
r
None
General Setting
Raised
Depressed
BackColor
Playback
Uniform
Display
Video
Recording
Clock
Channel
Reset All
age
er
Transparent
White
Black
Red
L.Shadow
R.Shadow
Back Opacity
Back Color
Green
Blue
Yellow
Magenta
Cyan
Press [SETUP] to exit.
7
30 EN
E7H51UD.indd 30
2007/02/19 18:23:32
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Before you make a recording, read the following information.
Recordable Discs
Recording Mode
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Recording Recording
Video/sound
quality
Disc size
8cm Disc
mode
time
18 min
36 min
(good)
HQ (1Hr)
SP (2Hr)
Logo
Attributes
SPP (2.5Hr) 45 min
LP (3Hr)
EP (4Hr)
SLP (6Hr)
HQ (1Hr)
SP (2Hr)
54 min
72 min
8cm/12cm, single-sided,
single layer disc
(poor)
(good)
108 min
60 min
DVD+RW
DVD+R
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
120 min
SPP (2.5Hr) 150 min
12cm Disc
LP (3Hr)
EP (4Hr)
SLP (6Hr)
180 min
240 min
360 min
(poor)
DVD-RW
DVD-R
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim
DVD+R 8x/16x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Note
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 74 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Unrecordable Discs
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 73).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVD-
video or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
EN 31
E7H51UD.indd 31
2007/02/19 18:23:32
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE RECORDING
Make Recording Compatible
Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized +VR mode discs
recorded on other unit recordable on this unit. When you
make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
3) Use [K / L] to select “Auto Chapter”, then press [OK].
“General Setting” menu will appear.
4) Use [K / L] to select a desired time option, then
press [OK].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
General Setting
Playback
3) Use [K / L] to select “Make Recording Compatible”,
Display
Video
Recording
Clock
Channel
Reset All
Auto Chapter
then press [OK].
Auto Chapter
g Compatible
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Auto Chapter
ai
Make Recording Compatible
Compatible
ON
OFF
5) Press [SETUP] to exit.
Note
• The interval for auto chapter marks may slightly
differ.
• A blank chapter may be created depending on the
remaining time of the disc.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that
has a title list created by other units.
5) Press [SETUP] to exit.
32 EN
E7H51UD.indd 32
2007/02/19 18:23:32
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
STANDBY-ON
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
2
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
Align the disc to
SPACE
the disc tray guide.
.
0
DISC MENU
SETUP
* Make sure the disc is compatible with this unit.
(Refer to page 31 for the list of compatible discs.)
o
s
B
OK
p
Press [OPEN/CLOSE A] to close the
TITLE
RETURN
disc tray.
3
4
j
F
i
B
It may take a while to load
the disc completely.
h
g
C
CHANNEL
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
--
+
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 31.
SP(2Hr)
0:58
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL
or [the Number buttons] to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 25.
/
]
5
CH 12
Instructions continue on the next page.
EN 33
E7H51UD.indd 33
2007/02/19 18:23:33
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 62.)
6
7
e.g.) DVD+R
I
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
Writing to Disc
90%
To set one-touch timer recording (OTR)...
1
SP(2Hr)
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)
One-touch timer recording will start.
I
0:30
• Press [STOP C] to exit the title list.
0:30
(normal recording)
1:00
6:00
5:30
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 26-27 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• Press [DISPLAY] to see the remaining recording time on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [STANDBY-ON y] to cancel the timer-
standby mode to use the unit continuously.
34 EN
E7H51UD.indd 34
2007/02/19 18:23:33
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Guide to Timer Programming Display
3
1
2
Timer Programming
Before recording, make sure
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)
MON JAN/01 11:00AM
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
Date
JAN/02
Start
End
CH
12:00AM 1:00AM DTV125. 1
New Program
1/1
STANDBY-ON
4
5
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
5 Total number of pages and current page (2 pages
maximum)
PQRS
TUV
WXYZ
7
8
9
Press [TIMER].
SPACE
CLEAR
.
0
DISC MENU
SETUP
1
o
Use [K / L] to select “New Program”,
then press [OK].
s
B
OK
p
TITLE
RETURN
2
Timer Programming
j
F
i
B
MON JAN/01 11:00AM
Date
Start
End
CH
New Program
h
g
C
CHANNEL
--
+
REC MODE
TIMER
AUDIO
1/1
REC
I
Use [K / L] to enter the date, then
press [B].
CM SKIP
RAPID PLAY
3
Timer Programming
MON JAN/01 11:00AM
Date
Start
Start
- - : - -
Mode
SP
End
CH
End
- - : - -
Date
JAN/02
CH
DTV125. 1
SP
2 : 00
1/1
JAN/01
Daily
When pressing [L] at
the current date, the
date will change as
follows.
p
p
p
p
MON-SAT
MON-FRI
SAT
e.g.) January 1st
Note
p
p
• If you have not set the clock yet:
FRI
“Clock Setting” menu will appear instead of the timer
programming list at step 1. Continue with the step 4
in “Manual Clock Setting” on page 24 before setting
a timer programming.
p
p
SUN
JAN/31
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
Instructions continue on the next page.
EN 35
E7H51UD.indd 35
2007/02/19 18:23:33
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
Use [K / L] to select a recording
mode.
Start
Date
JAN/02
CH
End
1 : 00AM
4
5
time, then press [B].
6
12 : 00AM
Mode
SP
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
- - : - -
DTV125. 1
SP
1 : 00
DTV125. 1
SP
SP
2 : 00
1/1
1/1
Refer to “Recording Mode” on page 31.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (E1 / E2), then press
[B].
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
DTV125. 1
SP
SP
1 : 00
e.g.) external input mode
Auto recording mode select...
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
E1
SP
SP
1 : 00
1/1
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
To record from external input (e.g., cable/
satellite box), select E1 or E2.
DTV125. 1
Auto
Auto
0 : 00
Use [K / L] to select the channel number to
record.
1/1
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 37
for more details.
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
e.g.) analog mode
Date
JAN/02
CH
Start
12 : 00AM
Mode
End
1 : 00AM
Press [OK] when all items are
entered.
10
SP
SP
1 : 00
Your program setting will be stored.
7
1/1
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
e.g.) digital mode
Date
JAN/02
CH
Start
End
1 : 00AM
12 : 00AM
Mode
SP
DTV125. 1
SP
1 : 00
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 37.
1/1
Press [STANDBY-ON y] to set a timer
programming.
TIMER REC indicator will light up on the front
8
panel.
36 EN
E7H51UD.indd 36
2007/02/19 18:23:34
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
Digital TV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
minor channels
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [STANDBY-ON y].
TIMER REC indicator will light off on the front panel.
Timer Programming
2) Press [TIMER].
TUE JAN/02 11:00AM
Date
E41 JAN/02
Start
End
CH
3) Check the information on the list you will need.
12:00AM 1:00AM DTV125. 1
New Program
Timer Programming
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)
Date
JAN/02
MON JAN/01 11:00AM
Start
End CH
12:00AM 1:00AM DTV125. 1
New Program
1/1
Each error number means:
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
E1-22 Recording error other E41
E37-39 than below
Power failed
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
E24
Unrecordable disc
E42
E43
E44
E45
E46
No disc when
recording
E25-26 Copy prohibited
program
Already 49 titles
recorded
4-B) To correct the timer program:
E29
Disc protected
Already 254 chapters
recorded
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
E30
Disc full
Copy prohibited
program
E35
E36
PCA full *1
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
Already finalized
video format disc
5) Press [TIMER] to exit.
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
6) Press [STANDBY-ON y] to return to the timer
standby mode.
To stop the timer recording in process
Press [STOP C] on the front panel of the unit.
[STOP C] on the remote control is not effective.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
Note
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
*1 PCA is a disc's space reserved for recording test.
EN 37
E7H51UD.indd 37
2007/02/19 18:23:34
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer
programming will be lost.
• If a disc is not inserted, TIMER REC indicator flashes and timer recording cannot be performed. In some cases, TIMER
REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a
recordable disc.
• When all the timer recording is completed, TIMER REC indicator flashes. To play back or eject the recorded disc, press
[STANDBY-ON y] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.
• During timer recording or timer standby mode (TIMER REC indicator will light up), any operations on the unit will not be
available. To make these operations available, press [STOP C] on the front panel to cancel the timer recording or
[STANDBY-ON y] to release timer standby mode (TIMER REC indicator will light off).
• To cancel the timer standby mode, press [STANDBY-ON y].
• When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the
disc becomes full during the recording, the unit turns itself off.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted
and be cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
turn the power off.
• The timer recording for digital TV cannot record any audio language other than English.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When two or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
38 EN
E7H51UD.indd 38
2007/02/19 18:23:35
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Overwriting from the Beginning of
the Title
Overwriting in the Middle of the Title
You can overwrite the existing title from the selected
position.
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON y].
Make sure that the TV input is set on the unit.
1) Follow the steps 1, 2 and 4 on the left.
2) Use [K / L] to select “Play”, then press [OK].
2) Load the disc that includes a title to be overwritten.
Playback will start.
It takes a while to display
the title list.
3) Press [PAUSE F] at the point from which you want
to start overwriting.
Title list will appear.
If the title list does not appear, press [TITLE].
4) Press [REC I].
3) Press [REC MODE] to select a recording mode.
“F I”, display menu, channel, and the time lapse will
be displayed as illustrated on the left.
Refer to “Recording Mode” on page 31.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Select the channel you want to record.
(Refer to page 25 on how to select a channel.)
1
SP (2Hr)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
6) Press [REC I] again.
Overwriting recording starts.
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
7) Press [STOP C] to stop recording.
EMPTY TITLE
1:37:52 SP(2Hr)
This operation may take a
while to be completed.
5) Use [K / L] to select “Overwrite”, then press [OK].
Note
1
SP (2Hr)
Play
Edit
Overwrite
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
6) Select the channel you want to record.
(Refer to page 25 on how to select a channel.)
• Title name will not be overwritten.
e.g.) DVD+RW
selected title number
to be overwritten
1
1
0:01:00
+RW
CH 12
SP(2Hr)
2:00
F
I
7) Press [REC I].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN 39
E7H51UD.indd 39
2007/02/19 18:23:35
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B
title name : A
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
existing title : C
title name : A
title name : C
When overwriting in the middle of the title:
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B*
title name : B
Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
*
Note
• When a title name is overwritten, its thumbnail is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.
40 EN
E7H51UD.indd 40
2007/02/19 18:23:35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either E2 (Front) or E1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
R
L
R
L
external device
(camcorder, VCR etc.)
RCA
RCA
RCA
RCA
or
S-video
cable
S-video
cable
video
cable
audio
cable
video
cable
audio
cable
or
VIDEO EO
IN
UT
Y
L
L
PB/CB
R
R
PR/CR
IN
OUT
or
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
(
)
EL1
E2
E1
to E2 IN
to E1 IN
IN
VIDEO VIDEO
IN
Y
L
L
PB/CB
R
R
PR/CR
OUT
IN
OUT
COAXIAL
AUDIO IN
(E1)
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
front of this unit
rear of this unit
Use [K / L] to select “Video Input”,
then press [OK].
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
3
4
Use [K / L] to select desired external
input position, then press [OK].
General Setting
PQRS
TUV
WXYZ
Playback
Display
Video
Progressive Scan
TV Aspect
7
8
9
SPACE
CLEAR
Recording
Clock
Channel
Reset All
t
Video Input
.
E1 (Rear)
E2 (Front)
0
DISC MENU
SETUP
o
s
B
OK
p
Use [K / L] to select the input jack
TITLE
RETURN
type to connect, then press [OK].
If you want to use VIDEO IN jack, select “Video
In”.
5
j
F
i
B
If you want to use S-VIDEO IN jack, select
“S-Video In”.
h
g
C
General Setting
Playback
Display
Video
Progressive Scan
TV Aspect
Press [SETUP] and use [K / L] to
select “General Setting”, then press
Recording
Clock
Channel
Reset All
E1 (Rear)
Video In
S-Video In
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Video”, then
press [OK].
Submenu will appear.
Press [SETUP] to exit.
2
6
EN 41
E7H51UD.indd 41
2007/02/19 18:23:35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 41.
Turn on the TV and press
[STANDBY-ON y], and be sure to
select the input of the TV to which
the unit is connected.
1
2
3
4
5
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Press [OPEN/CLOSE A] to open the
disc tray. Place the disc to record
properly.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Press [OPEN/CLOSE A] to close the
disc tray.
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
It takes a while to load
the disc.
.
0
DISC MENU
SETUP
o
Select the input of the unit which the
external device is connected. (E2 or
E1)
s
B
OK
p
TITLE
RETURN
• To use the input jacks on the rear of this unit;
j
F
i
B
Select “E1 (Rear)” position by using [SOURCE]
or [CHANNEL
/
].
h
g
C
• To use the input jacks on the front of this unit;
CHANNEL
Select “E2 (Front)” position by using [SOURCE]
--
+
or [CHANNEL
/
].
REC MODE
TIMER
AUDIO
• As for E2 and E1, you can also select external
input position by using [the Number buttons].
e.g.) For E1, press [0], [0], [1].
REC
I
CM SKIP
RAPID PLAY
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 31.
LP
(2Hr) (2.5Hr) (3Hr)
EP
(4Hr)
SLP
(6Hr)
SPP
HQ
(1Hr)
SP
Press [RECORD I] on the unit to start
recording.
6
7
8
Start playback on the external device
to record from.
2 3
8 6 1
Press [STOP C] on the unit to stop
recording.
This operation may take a
while to be completed.
42 EN
E7H51UD.indd 42
2007/02/19 18:23:38
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
Press [SETUP].
1
2
3
STANDBY-ON
Use [K / L] to select “Disc Edit”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
Disc Edit
SPACE
CLEAR
.
Edit Disc Name
Erase Disc
Make Edits Compatible
0
DISC MENU
SETUP
Disc Protect OFF
ON
o
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select “Yes”, then press
h
g
C
[OK].
CHANNEL
--
+
4
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Com
REC MODE
TIMER
AUDIO
Protect this disc?
Disc Protect OF
REC
Yes
No
I
CM SKIP
RAPID PLAY
A disc will be protected.
This operation may take a
while to be completed.
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON
OFF
To release the protect for the disc, select “Yes” at step 4.
EN 43
E7H51UD.indd 43
2007/02/19 18:23:39
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize discs to play back in other DVD
players.
1
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
longer time period for finalization. Do not unplug the
power cord during finalization.
2
STANDBY-ON
Use [K / L] to select “Finalize”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
3
4
A
ABC
DEF
Use [K / L] to select “Yes”, then press
[OK].
e.g.) DVD+R, DVD-R
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
Disc Edit
7
8
9
SPACE
CLEAR
Edit Disc Name
Finalize
.
0
Disc Protect OFF
Finalize disc?
DISC MENU
SETUP
Yes
No
o
Finalizing will start.
s
B
OK
p
TITLE
RETURN
Finalizing
90%
j
F
i
B
To cancel finalizing...
(DVD-RW only)
h
g
C
CHANNEL
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
--
+
REC MODE
TIMER
AUDIO
REC
I
Do you want to cancel ?
CM SKIP
RAPID PLAY
Yes
No
Finalizing
5%
• If
appears when pressing [STOP C], you cannot
Note
cancel finalizing because the finalizing has been in
certain progress.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• When selecting “No” and press [OK] or [RETURN] ,
finalizing will be continued.
• You cannot cancel finalizing the DVD+R/DVD-R once
it has started.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
This operation may take a
while to be completed.
Disc Protect ON
OFF
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
Finalizing is completed.
* DO NOT power off during finalization, this will result
in malfunction.
5
44 EN
E7H51UD.indd 44
2007/02/19 18:23:39
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K / L] to
select “General Setting”, then press
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
STANDBY-ON
2
3
4
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Auto Finalize”,
then press [OK].
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
General Setting
.
0
Playback
Display
Video
Recording
Clock
Channel
Reset All
Auto Chapter
ng Compatible
DISC MENU
SETUP
Auto Finalize
o
Disc Full
End of Timer Rec
s
B
OK
p
TITLE
RETURN
j
F
i
B
h
g
C
Use [K / L] to select “ON”, then press
[OK].
e.g.) “Disc Full”
CHANNEL
--
+
5
6
REC MODE
TIMER
AUDIO
General Setting
Playback
REC
Display
Video
Recording
Clock
Channel
Reset All
Auto Chapter
g Compatible
Auto Finalize
I
Disc Full
ON
CM SKIP
RAPID PLAY
OFF
Your setting will be activated.
Press [SETUP] to exit.
EN 45
E7H51UD.indd 45
2007/02/19 18:23:40
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Unplayable Discs
Playable Discs and Files
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos will play back on the unit. Other disc
types are not guaranteed to play back.
The following discs will not play back on this unit.
• CD-ROM
• DVD-RAM
• DVD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• DVD-audio
• Unfinalized disc
• DVD contains MP3 and DVD or CD contains Windows
Media™ Audio/JPEG files
Playable discs
Logos
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
DVD-video
DVD+RW
Color Systems
DVD+R
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
CD-DA (audio CD)
video CD
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
CD-RW
CD-R
Playable files
Media
CD-DA
CD-RW/-R
MP3
is a trademark of DVD Format/Logo Licensing Corporation.
46 EN
E7H51UD.indd 46
2007/02/19 18:23:40
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
PBC (playback control) for Video CD
Hint for DVD Playback
The contents of DVD are generally divided into titles.
Titles may be further subdivided into chapters.
You can select images or information on the menu
screen by activating the PBC (playback control) function
of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
DVD-video
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
audio CD, video CD
Note
track 1
track 2
track 3
track 4
track 5
file 5
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
video CD, this setting turns to “ON” automatically.
MP3
file 3
• Some operations cannot be performed while PBC
function is on. Cancel PBC function temporarily to
perform those operations by following the
instruction below.
folder 1
file 1
folder 2
file 4
file 2
1) Press [SETUP].
2) Use [K / L] to select “CD Playback Mode”, then
press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
EN 47
E7H51UD.indd 47
2007/02/19 18:23:41
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
2
STANDBY-ON
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Align the disc to
the disc tray guide.
.
0
DISC MENU
SETUP
o
* Make sure the disc is compatible with this unit.
(Refer to page 46 for the list of compatible discs.)
s
B
OK
TITLE
RETURN
Press [OPEN/CLOSE A] to close the
disc tray.
p
B
j
F
i
3
4
5
It may take a while to load
the disc completely.
h
g
C
CHANNEL
--
+
Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
Refer to “Using the Title / Disc Menu” on page
52.
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 53.
Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 47).
48 EN
E7H51UD.indd 48
2007/02/19 18:23:41
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
.
0
Align the disc to
the disc tray guide.
DISC MENU
SETUP
o
* Make sure the disc is compatible with this unit.
(Refer to page 46 for the list of compatible discs.)
s
B
OK
p
TITLE
RETURN
Press [OPEN/CLOSE A] to close the
disc tray.
j
F
i
B
3
h
g
C
It may take a while to load
the disc completely.
CHANNEL
--
+
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
REC MODE
TIMER
AUDIO
REC
I
CM SKIP
RAPID PLAY
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 4.
EN 49
E7H51UD.indd 49
2007/02/19 18:23:41
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Use [K / L] to select a desired title,
then press [OK].
Use [K / L] to select “Play”, then
press [OK].
4
5
6
1
SP (2Hr)
1
SP (2Hr)
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
3
EMPTY TITLE
1:37:52 SP(2Hr)
EMPTY TITLE
1:37:52 SP(2Hr)
• For Video CD, when “PBC (Video CD only)” in
“CD playback Mode” menu is set to “ON”, the
video CD main menu will appear when
inserting a disc. In such case, select a numbered
menu with [the Number buttons].
• Press [B] to display the next page, and press
[{] to display the previous page.
Playback will start.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 53.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
e.g.) DVD+RW
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
e.g.) DVD+R
No Disc Name
Disc
DVD+R
5
Total Titles
Disc Space Used
Disc Protect
Finalize
1:30:48
OFF
Finalized
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 74.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
50 EN
E7H51UD.indd 50
2007/02/19 18:23:41
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3 Files
Follow steps 1 to 2 in “Direct
Playback” on page 48.
1
2
STANDBY-ON
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load
the disc completely.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
When an audio CD is inserted, track list will
appear.
When a CD-RW/-R with MP3 files is inserted, file
list will appear.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
• To exit the track/file list, press [STOP C].
• To resume the track/file list, press [TITLE].
.
0
DISC MENU
SETUP
o
Use [K / L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
s
B
OK
p
TITLE
RETURN
3
File List
j
F
i
DISC NAME
B
A
B
C
D
h
g
C
CHANNEL
1
2
3
4
MP3 file1
MP3 file2
MP3 file3
MP3 file4
--
+
REC MODE
TIMER
AUDIO
1/ 2
REC
I
When selecting track/file:
Playback will start.
CM SKIP
RAPID PLAY
When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and MP3 files:
• Folders are shown by
.
• Audio CD tracks are shown by
.
3
• MP3 files are shown by
.
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3>
Note
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps
• Files whose extension is other than “.mp3(MP3)” will
not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
EN 51
E7H51UD.indd 51
2007/02/19 18:23:42
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Using the Title / Disc Menu
Pause
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
1)Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
F
2)Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
2)Press [PLAY B] to return to the normal playback.
3)Press [STOP C] to exit.
Note
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 80.)
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “CD
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
52 EN
E7H51UD.indd 52
2007/02/19 18:23:42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During
Resume Playback
Playback
You can play back from where you stopped playing back
the disc last.
1)During playback, press [STOP C].
The resume message will appear.
You can skip TV commercials to enjoy the recorded
programs without interrupting.
During playback, press [CM SKIP].
Resume ON
Normal playback will start at 30 seconds ahead from the
point you press [CM SKIP].
Every time you press [CM SKIP], the searching point will
be extended by 30 seconds ahead.
You can press [CM SKIP] up to 6 times (180 seconds).
e.g.) Press [CM SKIP] once.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
Note
• For MP3 files, playback will resume from the
beginning of the file at which playback was stopped.
• Some video CD with the PBC function resume
playback from the beginning of the track.
CM Skip 30 sec.
(forwarding 30 seconds)
Fast Forward / Fast Reverse Playback
1)During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD) or files (for MP3 files) is not possible.
B
Playback will return to the normal playback.
g
h
g
h
g
h
g
h
g
h
g
h
normal
speed
40x
20x
5x
2x
20x
40x
playback
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
8x with sound (indicated with
/
).
2)Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
EN 53
E7H51UD.indd 53
2007/02/19 18:23:43
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Rapid Playback
Slow Forward / Slow Reverse Playback
Rapid playback function is available only during
playback.
1)During playback, press [PAUSE F]. Then press
[D] or [ E].
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
g
h
g
h
g
h
g
h
g
h
g
h
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
1)During playback, press [RAPID PLAY].
Press [RAPID PLAY] once during playback.
To return to the normal playback, press [PLAY B].
B
:
Plays back approximately at 0.8 times of normal
playback.
Note
Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
• Forward/reverse speed will be indicated with icons
as follows.
B
:
forward (approx. speed)
1/16x:
1/8x:
1/3x:
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
B :
reverse (approx. speed)
2)Press [PLAY B] to continue the normal playback.
1/16x:
1/8x:
1/4x:
Note
• Audio (language) setting cannot be changed while
using this mode.
• Only slow forward is available when playing back
video CD.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
Step by Step Playback
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [G] with the sound muted.
To play back step by step backward:
Press [H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [H] / [G] to reverse/ advance
continuously.
3)Press [PLAY B] to continue the normal playback.
Note
• Only step by step forward playback is available for
playing back video CD.
54 EN
E7H51UD.indd 54
2007/02/19 18:23:43
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Zoom
Marker Setting
1)During playback, press [DISPLAY].
This feature allows you to assign a specific point on a disc
2)Use [{ / B] to select
, then press [OK] within 1
to be called back later.
second or wait for 1 second to display the selection
menu.
1)During playback, press [DISPLAY].
e.g.) DVD-video
2)Use [{ / B] to select
, then press [OK] within 1
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
second or wait for 1 second to display the marker
list.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired zoom factor to zoom,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
1
2
3
4
5
6
Zoom area will be displayed.
The title (track) number and the time will be displayed.
4)Use [K / L / { / B] to select a desired zoom
position, then press [OK].
4)To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
Zoom playback will start.
– Turning off the power
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [DISPLAY] again at
step 1.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK].
EN 55
E7H51UD.indd 55
2007/02/19 18:23:44
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title / Chapter Search
Track Search
Using [H] / [G]
Using [H] / [G]
1)During playback, press [G] to skip the current
track/file and move to the next.
1)During playback, press [G] to skip the current
title or chapter and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
chapter, press [H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Using [DISPLAY]
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
e.g.) audio CD
, then press [OK].
Using [DISPLAY]
1)During playback, press [DISPLAY].
1/
5
0:00:15 / 0:05:00
CD
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) MP3 files
1/
5
0:00:15
MP3
The number next to
3)Title:
will be highlighted.
The number next to
will be highlighted.
Use [K / L] or [the Number buttons] to enter a
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
desired title number to search, then press [OK].
Title search will start.
Chapter:
After the search, playback will start automatically.
Press [B] to move to the number next to
chapter.
for
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
Note
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
After the search, playback will start automatically.
• Track search is not available when you play back the
video CD with PBC function.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total time
of the title
total number
of chapters
56 EN
E7H51UD.indd 56
2007/02/19 18:23:45
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
EN 57
E7H51UD.indd 57
2007/02/19 18:23:45
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT / RANDOM / PROGRAM PLAYBACK
Repeat Playback
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
Available repeat function may vary depending the discs.
1)During playback press [DISPLAY].
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback of MP3 files.
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
• Repeat playback is not available when you play back
the video CD with PBC function.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Random Playback
3)Use [K / L] to select a desired option to repeat,
then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
You can play back a disc randomly instead of playing
back in the original order.
OFF
Title
Chapter
A – B
1)Press [SETUP].
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
e.g.) audio CD, video CD
“CD Playback Mode” menu will appear.
1/
5
0:00:15 / 0:05:00
CD
3)Use [K / L] to select “Random Play”, then press
[OK].
OFF
Track
All
A – B
Random playback will start.
e.g.) MP3 files
Note
1/
5
0:00:15
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
MP3
OFF
Track
All
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
random playback.
Group
The selected repeat playback will start.
1/
5
1/
5
0:01:00 / 1:23:45
DVD
Repeat
Title
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
58 EN
E7H51UD.indd 58
2007/02/19 18:23:45
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT / RANDOM / PROGRAM PLAYBACK
Program Playback
You can program the disc to play back in your desired
order.
1)Press [SETUP].
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3)Use [K / L] to select “Program Play”, then press
[OK].
4)Use [K / L] to select a desired track, then press [OK]
or [B].
CD Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
CD Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:31:07
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
EN 59
E7H51UD.indd 59
2007/02/19 18:23:46
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
1)During playback, press [DISPLAY].
1)During playback press [DISPLAY], then proceed to
step 2), or press [AUDIO] then proceed to step 3).
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3)Use [K / L] to select a desired subtitle language,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
1.English
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
Note
1/
5
0:00:15 / 0:05:00
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
CD
1. L/R
2. L
3. R
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 91.
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
60 EN
E7H51UD.indd 60
2007/02/19 18:23:46
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
Angle icon appears when a switching camera angle is
available.
then press [OK].
e.g.) DVD-video
Angle will switch each time you press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Note
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
menu. Refer to page 80.
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option, then press
[OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
EN 61
E7H51UD.indd 61
2007/02/19 18:23:46
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DISC EDITING
Guide to a Title List
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
You can edit discs for the following items. Be sure that
once you edit titles, they will not remain as original.
• Deleting Titles (Refer to page 63.)
• Putting Names on Titles (Refer to page 64.)
• Setting Chapter Marks (Refer to page 65.)
• Clearing Chapter Marks (Refer to pages 66-67.)
• Hiding Chapters (Refer to page 68.)
Press [TITLE].
1
1
SP (2Hr)
• Setting Pictures for Thumbnails (Refer to page 69.)
• Dividing a Title (DVD+RW/DVD-RW only)
(Refer to page 70.)
• Putting Name on Disc (Refer to page 71.)
• Setting or Releasing Disc Protect (Refer to page 72.)
• Erasing Disc (Refer to page 73.)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
Play
Edit
Overwrite
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
• Making Edits Compatible (Refer to page 74.)
6
Note
Edit
• When selecting “Edit” on pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc.
• The capacity indicator in the right side of the title list
may not indicate the precise capacity in the disc.
Title Delete
2
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
• The capacity indicator may not indicate the capacity
for the titles of which recording time is short.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
NOV/22/07 11:35AM CH13 EP
0:00:59
11 10
9
8
7
1. Title list: List of the titles recorded on the disc, and
their information.
2. Arrow: Indicating there is a previous / next page.
3. Title information: On the first line, title name
(editable) is displayed. On the second line, the length
of the title is displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
4. Recording mode: Currently selected recording mode
is displayed here.
5. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
6. Thumbnails: A cut from the recorded content is
displayed here.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the
playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [STOP C] to exit the title list.
62 EN
E7H51UD.indd 62
2007/02/19 18:23:47
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting Titles
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
For DVD+RW/DVD-RW, when the last recorded title in the
title list is deleted, the available disc space to record on
will be increased. For DVD+R/DVD-R, the disc space to
record on will not be changed.
Use [K / L] to select “Edit”, then
press [OK].
3
4
5
SP (2Hr)
1
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
STANDBY-ON
EMPTY TITLE
1:37:52 SP(2Hr)
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Title Delete”,
then press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Edit
PQRS
TUV
WXYZ
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
NOV/21/07 11:00AM CH12 SP
0:00:59
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Edit - Title Delete
h
g
C
Yes
1
No
NOV/21/07 11:00AM CH12 SP
0:00:59
Press [TITLE].
After that, “Are you sure?” will appear, select
1
2
“Yes” and then press [OK].
Title will be deleted.
Data will be written onto the disc momentarily.
Use [K / L] to select a desired title,
then press [OK].
Writing to Disc
90%
SP (2Hr)
1
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
This operation may take a
while to be completed.
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
After editing is complete, the title list will appear.
e.g.) DVD+RW/DVD-RW
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
1
EMPTY TITLE
0:21:14 SP(2Hr)
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
Note
3
• Deleted part of the titles in the capacity indicator
changes in color.
EMPTY TITLE
1:37:52 SP(2Hr)
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY TITLE”.
EN 63
E7H51UD.indd 63
2007/02/19 18:23:47
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
Use [K / L] to select “Yes”, then press
[OK].
STANDBY-ON
4
5
Edit - Edit Title Name
Yes
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
No
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
MY FAVORITE
0:00:59
PQRS
TUV
WXYZ
The name you entered will be activated for the title.
7
8
9
CLEAR
SPACE
.
0
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc momentarily.
DISC MENU
SETUP
o
s
B
OK
p
This operation may take a
while to be completed.
TITLE
RETURN
j
F
i
B
Guide to Edit Title Name
h
g
C
1)Use [K / L] to select a desired character set, then
press [OK].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
Select
ABC
abc
123
@ ! ?
1
2
Press
0
<space>
<space>
<space>
0
Use [K / L] to select “Edit Title
Name”, then press [OK].
! ”# $ % & ’( )
+ , - . / : ; < = >
1
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
Edit
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
GHI
ghi
JKL
jkl
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
NOV/21/07 11:00AM CH12 SP
0:00:59
wxyz
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
1
*1 Press
, character set will be changed to the “ @!? ”
mode automatically.
3
2
9
*2 Press
to
, character set will be changed to the
Edit - Edit Title Name
previous input mode automatically.
• To delete letters, press [CLEAR] repeatedly.
A
a
B
b
2
!
C
c
3
?
1
character set
Holding [CLEAR] to delete all letters.
1
• Use [s / B] to move the cursor to the left and right.
@
• You can enter up to 30 letters.
M
Note
0:00:59
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
area for entering title names
When you finish entering a title name, press [OK].
64 EN
E7H51UD.indd 64
2007/02/19 18:23:47
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
1
2
3
STANDBY-ON
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Press [PLAY B] and then [PAUSE F]
to decide the point at which you will
create a new chapter mark.
• It is convenient to use [H], [G],
[E] and [D] for finding the point to add a
new chapter mark.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Add”, then press
[OK].
s
B
OK
p
4
Edit - Chapter Mark
TITLE
RETURN
Add
1
Delete
Delete All
j
F
i
B
Chapter
2/
2
h
g
C
CHANNEL
NOV/21/07 11:00AM CH12 SP
--
+
0:00:59
REC MODE
TIMER
AUDIO
REC
Use [K / L] to select “Yes”, then press
I
[OK].
CM SKIP
RAPID PLAY
5
Edit - Chapter Mark - Add
Yes
1
No
Chapter
2/
2
F
NOV/21/07 11:00AM CH12 SP
0:00:59
A new chapter mark will be added.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• When the number of chapter marks in a title is 99
and the number of chapter marks in a disc is 254,
chapter marks cannot be added.
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN 65
E7H51UD.indd 65
2007/02/19 18:23:48
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
STANDBY-ON
1
2
3
4
5
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [H] / [G] to select a chapter
mark to be deleted.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Delete”, then
press [OK].
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Edit - Chapter Mark - Delete
h
g
C
Yes
1
CHANNEL
No
--
+
Chapter
2/
2
REC MODE
TIMER
AUDIO
F
REC
NOV/21/07 11:00AM CH12 SP
I
0:00:59
CM SKIP
RAPID PLAY
The selected chapter mark will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
66 EN
E7H51UD.indd 66
2007/02/19 18:23:48
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks (cont’d)
To delete all chapter marks:
STANDBY-ON
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
4
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
Use [K / L] to select “Delete All”,
then press [OK].
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Edit - Chapter Mark - Delete All
h
g
C
Yes
1
No
CHANNEL
--
+
Chapter
2/
2
REC MODE
TIMER
AUDIO
F
NOV/21/07 11:00AM CH12 SP
REC
0:00:59
I
CM SKIP
RAPID PLAY
Use [K / L] to select “Yes”, then press
[OK].
5
6
Edit - Chapter Mark - Delete All
Are you sure?
1
Yes
No
Chapter
2/
2
NOV/21/07 11:00AM CH12 SP
0:00:59
All chapter marks will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN 67
E7H51UD.indd 67
2007/02/19 18:23:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
1
2
3
4
STANDBY-ON
Use [K / L] to select “Hide Chapter”,
then press [OK].
Submenu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [H] / [G] to decide the
chapter to be hidden.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Use [K / L] to select “Hidden”, then
press [OK].
.
0
DISC MENU
SETUP
o
Edit - Hide Chapter
Visible
1
s
B
OK
p
Hidden
TITLE
RETURN
Chapter
2/
2
Visible
j
F
i
B
NOV/21/07 11:00AM CH12 SP
0:00:59
h
g
C
CHANNEL
--
+
After this operation is completed,
press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
REC MODE
TIMER
AUDIO
5
REC
I
This operation may take a
while to be completed.
CM SKIP
RAPID PLAY
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.
After that, title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
SP (2Hr)
1
Hidden
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
68 EN
E7H51UD.indd 68
2007/02/19 18:23:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Pictures for Thumbnails
You can set your desired scene as a thumbnail for each
title.
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
1
2
STANDBY-ON
Use [H], [G], [E], [D],
[PAUSE F] and [PLAY B] to decide
the picture you want to select as a
thumbnail.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Index Picture”,
then press [OK].
PQRS
TUV
WXYZ
7
8
9
3
SPACE
CLEAR
.
0
Use [K / L] to select “Yes”, then press
[OK].
DISC MENU
SETUP
o
4
Edit - Index Picture
s
B
OK
p
1
Yes
No
TITLE
RETURN
j
F
i
B
F
h
g
C
NOV/21/07 11:00AM CH12 SP
0:00:59
CHANNEL
--
+
A picture for thumbnail will be set.
REC MODE
TIMER
AUDIO
Press [RETURN] to exit.
REC
Data will be written onto the disc momentarily.
I
CM SKIP
RAPID PLAY
5
This operation may take a
while to be completed.
Note
• If the selected picture for a thumbnail is overwritten,
the index picture is reset to the first scene of the title.
EN 69
E7H51UD.indd 69
2007/02/19 18:23:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Follow steps 1 to 3 in “Deleting
Titles” on page 63 to display “Edit”
menu.
You can divide one title into 2 new titles.
1
2
Use [H], [G], [E], [D],
[PAUSE F] and [PLAY B] to decide
the point at which you will divide the
title.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Title Dividing”,
then press [OK].
PQRS
TUV
WXYZ
3
7
8
9
SPACE
CLEAR
Use [K / L] to select “Yes”, then press
[OK].
.
0
DISC MENU
SETUP
4
o
Edit - Title Dividing
1
Yes
No
s
B
OK
p
TITLE
RETURN
F
j
F
i
B
NOV/21/07 11:00AM CH12 SP
0:00:59
h
g
C
CHANNEL
The title will be divided into 2 new titles.
Both title names are identical, and index pictures
are reset to the first scene at this point.
--
+
REC MODE
TIMER
AUDIO
REC
Data will be written onto the disc momentarily.
I
CM SKIP
RAPID PLAY
This operation may take a
while to be completed.
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
49, and the number of recording chapters reaches
the maximum of 254.
70 EN
E7H51UD.indd 70
2007/02/19 18:23:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Name on Disc
You can put a name on the disc and change it from this
menu.
Press [STOP C] if you are playing back a disc.
Press [SETUP].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Disc Edit”, then
press [OK].
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
Use [K / L] to select “Edit Disc
Name”, then press [OK].
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
3
.
0
Disc Edit
DISC MENU
SETUP
Edit Disc Name
Erase Disc
Make Edits Compatible
o
Disc Protect OFF
ON
s
B
OK
p
TITLE
RETURN
A window for entering a title name will appear.
Edit Disc Name
j
F
i
B
A
a
B
b
2
!
C
c
3
?
No Disc Name
1
h
g
C
Disc
DVD+RW
3
@
Total Titles
Disc Space Used
Disc Protect
0:30:48
OFF
CHANNEL
Make Edits Compatible
Needed
--
+
REC MODE
TIMER
AUDIO
0:00:00
REC
I
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
64.
CM SKIP
RAPID PLAY
4
5
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit Disc Name
Yes
No
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
MY FAVORITE DISC
0:00:00
The name you entered will be activated for the title.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
EN 71
E7H51UD.indd 71
2007/02/19 18:23:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing Disc Protect
To prevent accidental editing, or erasing the titles, you
can protect them.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 71 to display “Disc
Edit” menu.
1
2
STANDBY-ON
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Disc Edit
1
GHI
4
2
JKL
5
3
MNO
6
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
• If the disc is already protected, “Disc Protect ON
OFF” will appear instead of “Disc Protect OFF
ON”.
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
3
h
g
C
Disc Edit
CHANNEL
Edit Disc Name
Erase Disc
--
+
Make Edits Com
Protect this disc?
Disc Protect OF
REC MODE
TIMER
AUDIO
Yes
No
REC
I
CM SKIP
RAPID PLAY
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
72 EN
E7H51UD.indd 72
2007/02/19 18:23:50
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 71 to display “Disc
Edit” menu.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Disc Edit
PQRS
TUV
WXYZ
Edit Disc Name
Erase Disc
Make Edits Compatible
7
8
9
SPACE
CLEAR
Disc Protect OFF
ON
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
3
C
h
g
Disc Edit
Edit Disc Name
Erase Disc
CHANNEL
--
+
Make E
When you press “Yes”, all the
Disc P
contents in the disc will be erased.
Are you sure to erase the disc?
REC MODE
TIMER
AUDIO
Yes
No
REC
I
CM SKIP
RAPID PLAY
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• When you select “Yes” at step 3, all contents of the
disc will be erased.
EN 73
E7H51UD.indd 73
2007/02/19 18:23:50
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Making Edits Compatible
Press [STOP C] if you are playing back a disc.
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 71 to display “Disc
1
2
Edit” menu.
STANDBY-ON
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Disc Edit
1
GHI
4
2
JKL
5
3
MNO
6
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
TITLE
RETURN
3
Disc Edit
Edit Disc Name
Erase Disc
j
F
i
B
Make E
Activate the Make Edits Compatible?
Disc P
h
g
C
Yes
No
CHANNEL
--
+
REC MODE
TIMER
AUDIO
REC
Data will be written onto the disc momentarily.
I
This operation may take a
while to be completed.
CM SKIP
RAPID PLAY
74 EN
E7H51UD.indd 74
2007/02/19 18:23:50
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup
Playback
Pages 77-80
Items (highlight is the default)
Parental Lock
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Disc Audio
Dynamic Range
Control
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will
be down sampled in 48kHz.
48kHz
96kHz
PCM
Dolby Digital
Set the type of sound signal which outputs
from the digital audio output jack.
Stream
Disc Menu Language
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Still Mode
Set whether or not to display the angle icon.
Set the type of still image in pausing playback.
ON
OFF
Auto
Field
Frame
Display
Pages 81-82
OSD Language
Screen Saver
Set the language for OSD (on-screen display).
English
Français
Español
OFF
5minutes
Set the idling time before the screen saver
starts.
10minutes
15minutes
30miniutes
CC Style
Pages 28-30
DTV CC
Set the type of the DTV closed caption.
OFF
Service1
Service2
Service3
Service4
Service5
Service6
User Setting
Font Size
ON
OFF
Set the whether or not CC style setting is
effective.
Set font size of the displayed caption.
Middle
Large
Small
Font Style
Set font style of the displayed caption.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Edge Type
Set edge type of the displayed caption.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
EN 75
E7H51UD.indd 75
2007/02/19 18:23:50
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Setup
Display
Pages 81-82
Items (highlight is the default)
CC Style Font Opacity
Pages 28-30
Contents
Set the font opacity of the displayed caption.
Solid
Translucent
Flash
Font Color
Transparent
White
Set the font color of the displayed caption.
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
Back Color
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Solid
Translucent
Flash
Transparent
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Download rating system via digital
broadcasting.
V-Chip00
Downloadable Rating
Change Password
Video
Pages 83-84
Progressive Scan
TV Aspect
ON
Set to the progressive scan mode (set to "ON")
or to the interlace scan mode(set to "OFF").
OFF
Set a picture size according to aspect ratio of
your TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Video Input
Page 41
E1(Rear)
Set the video input type for the external input.
Insert chapter marks at even time interval.
Video In
S-Video In
Video In
E2(Front)
S-Video In
Recording
Auto Chapter
Page 32
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Auto Finalize
Page 45
Disc Full
ON
OFF
Set the unit to finalize the disc automatically.
End of Timer Rec ON
OFF
Make Recording Compatible
Page 32
ON
OFF
Set to prohibiting additional recording (OFF)
or to replace the title list after recording (ON).
Clock
Pages 23-24
Clock Setting
Auto Clock Setting
Set the clock.
Set the clock automatically.
OFF
Auto
Manual
Daylight Saving Time
Auto Channel Preset
Manual Channel Preset
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
ON(MAR-NOV)
ON(APR-OCT)
OFF
Channel
Pages 20-22
Antenna
Cable (Analog)
Cable (Analog/Digital)
TV Audio Select
Page 27
Set the analog TV audio type for output and
recording.
Stereo
SAP
Reset All
Page 85
Yes
No
Set to the default setting.
Note
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
76 EN
E7H51UD.indd 76
2007/02/19 18:23:51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback
Press [STOP C] if you are playing back a disc.
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
[OK].
ABC
DEF
“General Setting” menu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Playback”, then
press [OK].
PQRS
TUV
WXYZ
7
8
9
CLEAR
General Setting
SPACE
Playback
Display
Video
Recording
Clock
.
0
DISC MENU
SETUP
o
Channel
Reset All
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select a desired item,
then press [OK].
h
g
C
CHANNEL
3
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
1
2
3
4
5
6
7
--
+
REC MODE
TIMER
AUDIO
REC
I
Still Mode
CM SKIP
RAPID PLAY
Submenu will appear.
Refer to
set the selected item.
to
on pages 78-80 and
1
7
4
5
When you finish with setting, press
[SETUP] to exit.
EN 77
E7H51UD.indd 77
2007/02/19 18:23:51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Parental Lock (Default: OFF)
A password has not been set yet.
1
A
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select “Yes”. Use [the Number buttons]
to enter a new password except for 4737, then press
[OK].
General Setting
General Setting
Parental Lock
Parental Lock
Playback
Display
Video
Recording
Clock
Channel
Reset All
Playback
Display
Video
Recording
Clock
Channel
Reset All
OFF
OFF
8 [Adult]
Use [K / L] to select the desired level, then press [OK].
l
Change Password?
uage
guage
Password Input
Yes
e
No
General Setting
4 [PG 13]
Parental Lock
Playback
3 [PG]
3 [PG]
2 [G]
1 [Kid Safe]
Yes
2 [G]
1 [Kid Safe]
Display
Video
Recording
Clock
Channel
Reset All
OFF
8 [Adult]
guage
7 [NC 17]
ge
6 [R]
age
5 [PG R]
4 [PG 13]
3 [PG]
Your setting will be activated.
A password has been set already.
2 [G]
1 [Kid Safe]
B
If a password has not been set yet, proceed to
If a password has been set already, proceed to
.
.
A
B
• Use [the Number buttons] to enter the current
password.
General Setting
Note
Parental Lock
Playback
Display
Video
Recording
Clock
Channel
Reset All
guage
• Parental lock function may not be available to some
discs.
OFF
8 [Adult]
Password Input
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
3 [PG]
2 [G]
1 [Kid Safe]
• Record the password in case you forget it.
Your setting will be activated.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
• If you want to change password, use [K / L] to select
“Yes”. Use [the Number buttons] to enter a new
password, then press [OK].
<change the password>
General Setting
General Setting
Parental Lock
Parental Lock
Playback
Display
Video
Recording
Clock
Channel
Reset All
Playback
Display
Video
Recording
Clock
Channel
Reset All
OFF
OFF
8 [Adult]
Change Password?
uage
uage
Password Input
Yes
e
No
4 [PG 13]
3 [PG]
3 [PG]
Yes
2 [G]
1 [Kid Safe]
2 [G]
1 [Kid Safe]
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
will be set to “OFF”.
78 EN
E7H51UD.indd 78
2007/02/19 18:23:51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Disc Audio
Dolby Digital (Default : Stream)
2
C
Choose the appropriate audio setting for your external device.
Use [K / L] to select a setting, then press [OK].
It will only affect a disc playback.
General Setting
Playback
Display
Video
Use [K
/
L] to select a desired item, then press [OK].
Parental Lock
Audio Out
Recording
Clock
ge
Dolby Digital
General Setting
D
PCM
P
Channel
Reset All
Stream
D
Playback
Display
Video
Parental Lock
Still Mode
Audio Out
Recording A
ge
Dynamic Range Control
Clock
Dolby Digital
PCM
Channel
B
Reset All
Still Mode
C
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Dynamic Range Control (Default : ON)
A
Stream : Outputs Dolby Digital signals
Set to “ON” to compress the range between soft and loud sounds.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
Audio Out
ge
Dynamic Range Control
D
ON
P
OFF
D
Still Mode
Your setting will be activated.
Note
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
PCM (Default : 48kHz)
B
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
Audio Out
PCM
ge
D
48kHz
P
96kHz
D
Still Mode
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
EN 79
E7H51UD.indd 79
2007/02/19 18:23:51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Disc Menu Language (Default : English)
3
Note
• Only the languages supported by the disc can be
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
guage
Disc Menu Language
English
ge
French
age
Spanish
Other
Angle Icon (Default : ON)
6
Your setting will be activated.
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [OK].
Audio Language (Default : Original)
4
Set the audio language.
General Setting
Playback
Use [K / L] to select a setting, then press [OK].
Display
Video
Parental Lock
Audio Out
Recording
Clock
Channel
Reset All
guage
e
age
Angle Icon
General Setting
ON
OFF
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
Still Mode
Audio Language
guage
Original
ge
English
age
French
Spanish
Other
Your setting will be activated.
Still Mode (Default : Auto)
7
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Select “Auto” usually.
Use [K / L] to select a setting, then press [OK].
Subtitle Language (Default : OFF)
General Setting
5
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
guage
e
age
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
Still Mode
Auto
Field
Frame
Still Mode
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
Subtitle Language
guage
ge
OFF
English
age
Your setting will be activated.
French
Spanish
Auto
: Optimum resolution setting (“Field” or
Other
“Frame”) will be selected.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Your setting will be activated.
Note
If “Other” is selected for
using [the Number buttons].
to
, press 4-digit code
3
5
•
Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Code Input
-
-
-
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 91.
80 EN
E7H51UD.indd 80
2007/02/19 18:23:52
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display
Press [STOP C] if you are playing back a disc.
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
3
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Display”, then
press [OK].
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
Use [K / L] to select a desired item,
then press [OK].
.
0
DISC MENU
SETUP
o
OSD Language
Screen Saver
CC Style
1
2
3
4
s
B
OK
p
TITLE
RETURN
V-Chip
Selection menu will appear.
j
F
i
B
h
g
C
Refer to
the selected item.
to
on page 82 and set
1
4
CHANNEL
--
+
4
5
• For
refer to pages 28-30.
3
REC MODE
TIMER
AUDIO
When you finish with setting, press
[SETUP] to exit.
REC
I
CM SKIP
RAPID PLAY
EN 81
E7H51UD.indd 81
2007/02/19 18:23:52
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display (cont’d)
OSD Language (Default : English)
Downloadable Rating
1
A
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
OSD Language
OSD Language
English
Français
Español
Downloadable Rating is currently not available.
• This message will also appear when you try to access
“DOWNLOADABLE RATING“ after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
Your setting will be activated.
To set the rating:
Screen Saver (Default : 10 minutes)
Use [K / L] to select “BLOCK SETTING” then press [OK] to
show the various types of ratings. Use [K / L] to select a
desired rating to set, then press [OK] to show the levels
for the rating. Use [K / L] to select a level, then press
2
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [OK].
[
OK] to switch “VIEW” or “BLOCK”. If you set one level to
“BLOCK”, all the higher levels will be turned to “BLOCK”
automatically.
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
OSD Language
To clear the downloadable rating information and its
setting:
Use [K / L] to select “CLEAR DOWNLOADABLE
RATING”, then press [OK].
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Change Password
B
Your setting will be activated.
Change the current password.
Use [the Number Buttons] to enter new access
password.
V-Chip
4
You can set the viewing limitation for the digital TV
programs to prevent your children from watching
inappropriate programs.
This feature is available only after the digital TV
ratings have been downloaded
Note
• When you forget the access password at step 1),
enter 4,7,3,7 using [the Number buttons] in the
password input window. Password will be cleared.
• The ratings can be downloaded by the unit
automatically if it is available in your area.
• Depending on the type of rating system, you may set
the levels individually.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the Number
buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
password.
General Setting
Playback
Display
Video
Recording
Clock
OSD Language
Screen Saver
CC Style
Password Input
Channel
Reset All
2) Use [K / L] to select a desired item, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
OSD Language
Screen Saver
V-Chip
A
B
Downloadable Rating
Change Password
82 EN
E7H51UD.indd 82
2007/02/19 18:23:52
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Video
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Video”, then
press [OK].
PQRS
TUV
WXYZ
2
7
8
9
SPACE
CLEAR
Use [K / L] to select a desired item,
then press [OK].
.
0
DISC MENU
SETUP
3
o
1
2
3
Progressive Scan
TV Aspect
Video Input
s
B
OK
p
TITLE
RETURN
Submenu will appear.
j
F
i
B
Refer to
the selected item.
to
on page 84 and set
1
2
h
g
C
4
5
CHANNEL
• For
refer to page 41.
3
--
+
REC MODE
TIMER
AUDIO
When you finish with setting, press
[SETUP] to exit.
REC
I
CM SKIP
RAPID PLAY
EN 83
E7H51UD.indd 83
2007/02/19 18:23:52
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Video (cont’d)
TV Aspect (Default: 4:3 Letter Box)
Progressive Scan (Default : OFF)
2
1
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
Use [K / L] to select a setting, then press [OK].
1) Use [K / L] to select “ON“, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
Reset All
General Setting
Progressive
Playback
TV Aspect
Display
Video
Recording
Clock
Channel
Reset All
Progressive Scan
4:3 Letter Box
Progressive Scan
4:3 Pan & Scan
16:9 Wide
ON
OFF
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
2) Use [{ / B] to select “Yes“, then press [OK].
General Setting
P
Activating progressive scan:
D
Check your TV has progressive scan
V
and connect with component video cable.
R
C
C
NOTE :
R
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to “Method 3” on page 15.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
84 EN
E7H51UD.indd 84
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Reset All
Reset the setting to default.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
“General Setting” menu will appear.
STANDBY-ON
Use [K / L] to select “Reset All”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
2
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Select “Yes” using [K / L] , then press
[OK].
PQRS
TUV
WXYZ
3
General Setting
7
8
9
Playback
Display
Video
SPACE
CLEAR
.
0
Reset to factory default?
Recording
Clock
Channel
Reset All
DISC MENU
SETUP
Yes
No
o
s
B
OK
p
TITLE
RETURN
j
F
i
B
Select “Yes” again using [K / L] ,
then press [OK].
h
g
C
4
General Setting
CHANNEL
--
+
Playback
Display
Video
Recording
Clock
REC MODE
TIMER
AUDIO
Are you sure?
Yes
No
Channel
Reset All
REC
I
CM SKIP
RAPID PLAY
Your setting in recording will be initialized.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
– OSD language setting
– Channel setting
– Clock setting
– Parental lock setting
– V-Chip setting
– Timer programming information
EN 85
E7H51UD.indd 85
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
Power
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
Picture
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check the connection to your TV (page 15).
• Check if the progressive scan mode is set correctly according to your TV
(page 84).
• Switch the input selector on your TV (such as to “E1”) so that the signal from
the unit appears on the TV screen.
Picture noise appears.
• Clean the disc with a cleaning cloth.
Playback picture from the external • If the picture output signal from the external devices passes through this
devices connected to this unit is
distorted.
unit to get to your TV, the copy protection signal applied to some DVD could
affect the picture quality. Disconnect the playback device in question and
connect it directly to your TV.
TV program reception does not
fill the TV screen.
• Try to set the channels with “Auto Channel Preset” or “Manual Channel
Preset” in “Channel” menu (pages 20-22).
• Select a channel of any TV program using [CHANNEL
/
].
TV program pictures are
distorted.
• Adjust TV antenna.
• Adjust the picture. (Refer to the TV’s manual.)
• Place the unit and TV farther apart.
• Place the TV and any bunched RF coaxial cables farther apart.
TV channels cannot be changed.
Playback picture is distorted.
• Switch the input to TV.
• Connect the RF coaxial cable correctly (pages 12-14).
• Keep the device which may cause electrical disturbances, such as a cellular
phone, away.
Sound
There is no sound.
• Clean the disc with a cleaning cloth.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode, sound is
not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not output.
This is not a malfunction.
• If you are using COAXIAL DIGITAL AUDIO OUTPUT jack, check the setting in
“Disc Audio” (page 79).
Sound is noisy.
• Clean the disc with a cleaning cloth.
No DTS sound is output.
• This unit is not compatible with DTS sound.
Remote control
The remote control does not
function.
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• Check if you are pointing the remote control at the recorder and NOT the TV.
If you have a plasma TV, it may interfere with the IR signal. Try the remote
with the plasma off. If the remote works, you may need to move the unit
away from the plasma TV.
86 EN
E7H51UD.indd 86
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
Playback
The disc does not play back.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 46).
• The region code on the DVD-video does not match the unit (page 46).
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back the
disc if it was not finalized.
Discs recorded on this unit
cannot be played back on other
DVD players.
• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc
after recording (page 44).
The disc does not start playback
from the beginning.
• Resume playback was activated (page 53). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
The unit starts playing back the
disc automatically.
• The DVD-video features an auto playback function.
Some functions such as stop,
search, or slow-motion playback
cannot be performed.
• Depending on the disc, you may not be able to do some of the operations.
Refer to the manual supplied with the disc.
The language for the sound track • The title does not have the multilingual audio tracks.
cannot be changed.
• The DVD-video prohibits the changing of the language for the sound track.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording / Timer recording / Editing
The channel cannot be changed
from the channel you are
recording.
• Set the TV’s input to “TV.”
Nothing was recorded even
though you set the timer setting
correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (pages 23- 24).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Recording does not stop
immediately after you press
[STOP C].
• It may take a few seconds for the unit to input disc data before recording
stops.
Timer recording is not complete
or did not start from the
beginning.
• The timer setting overlapped with another setting that has priority (page 38).
• Disc space was not enough.
EN 87
E7H51UD.indd 87
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
Others
The unit does not operate
properly.
• When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.
The disc tray does not open when • It may take a few seconds for the disc tray to open after you have recorded or
you press [OPEN/CLOSE A].
edited a disc. This is because the unit is adding disc data to the disc.
“Repairing” appears on the TV
screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing process
will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In a case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Yes
No
Repairing
88 EN
E7H51UD.indd 88
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which bear
the marks on page 46.
• Insert the disc with the labeled side
facing up.
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 78).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 31).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 72).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (page 63).
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 66-67).
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Insert a new disc.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 44).
Recording Error
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 32).
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
EN 89
E7H51UD.indd 89
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with cable/satellite
box?
Yes, you can. Select “E1” or “E2” as your recording
channel, and leave the cable/satellite box on (pages 14,
35-38).
– Can I record one channel while watching another
channel using a cable / satellite box?
It depends on your connection configurations. For
more details, please kindly contact your cable / satellite
provider.
– Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 13). This unit does not have an RF modulator.
– Can I change the channels on the cable / satellite box
using the remote control of this unit?
No. Changing the channels on the cable / satellite box
using this unit’s remote control is not possible. You
need to use the remote control supplied with the cable /
satellite box to change the channels on the cable / satellite
box.
90 EN
E7H51UD.indd 90
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
EN 91
E7H51UD.indd 91
2007/02/19 18:23:53
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PBC (playback control) (video CD only)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter
Progressive Scan (525p/480p)
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(525i/480i) TV signals. Refer to page 84 for instructions on
selective progressive scan mode.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Finalize
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
Title (DVD only)
A collection of chapters on DVD. See also “Chapter”.
Track
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
Video CD
A digital format for store video data in compact disc.
92 EN
E7H51UD.indd 92
2007/02/19 18:23:54
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
System
Power requirements
Power consumption
DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R
120V AC +/-10%, 60Hz +/-5%
22W (standby: 2.0W)
Dimensions (width x height x depth)
Weight
16 9/16 x 2 3/8 x 9 3/4 inches (420 x 59 x 247mm)
4.7 lbs. ( 2.1kg )
Operating temperature
Operating humidity
TV format
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
Recording
Recording format
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording discs
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
1Vp-p (75Ω)
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
VHF/UHF/CATV input and output
F-type
75Ω unbalanced
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Audio output
RCA jack x 2
Video input
RCA jack x 1
Video output
RCA jack x 1
1Vp-p (75Ω)
S-video input
Mini DIN 4-pin x 1
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
500mVp-p (75Ω)
C: 286mVp-p (75Ω)
C: 286mVp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
S-video output
Mini DIN 4-pin x 1
Component video output
RCA jack x 3
Coaxial digital audio output
RCA jack x 1
PR/CR: 700mVp-p (75Ω)
Note
• The specifications and design of this product are subject to change without notice.
EN 93
E7H51UD.indd 93
2007/02/19 18:23:54
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/-R serán grabados
automáticamente en el modo DVD+VR.
Discos reproducibles
DVD-video
Logotipos
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
DVD+RW
DVD+R
Verbatim
DVD+R 8x/16x,
DVD-R 8x,
DVD+RW 4x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
DVD-RW
(Sólo discos en modo de video finalizados)
El comportamiento de cualquier otro disco no está
garantizado.
DVD-R
(Sólo discos en modo de video finalizados)
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectos en otros equipos. (Consulte la página 74.)
Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
CD-DA (CD de audio)
CD de video
Logotipo
Atributos
CD-RW
CD-R
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
DVD+RW
DVD+R
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
Archivos reproducibles
Medio
CD-DA
CD-RW/-R
DVD-RW
DVD-R
MP3
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Disco no Grabable
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 73.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
94 ES
E7H51UD.indd 94
2007/02/19 18:23:54
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión básica ilustrada más abajo.
antena de
VHF / UHF
parte trasera de este aparato
IN
VIDEO VIDEO
IN OUT
L
R
OUT
IN
S-VIDEO AUDIO OUT
AUDIO IN
ANTENNA
(
)
E1
IN
cable coaxial de RF
VIDEO
OUT
o
L
empresa de
TV por cable
cable de
video RCA
parte trasera de su televisor
R
OUT
AUDIO OUT
ANTENNA
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
cable de
cable coaxial de RF
audio RCA
ANT. IN
R
L
AUDIO IN VIDEO IN
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
Conexión a Una Caja de TV por Cable / Satelital
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión como se ilustra abajo.
ej.)
parte trasera de su televisor
antena parabólica
satelital
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
VIDEO IN AUDIO IN
R
L
o
ANT. IN
empresa de
TV por cable
cable de
audio RCA
cable de
video RCA
parte trasera de este aparato
cable coaxial de RF
IN
VIDEO VIDEO
IN
OUT
L
R
IN
OUT
IN
S-VIDEO
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
AUDIO IN
ANTENNA
(
)
E1
cable coaxial de RF
ANT. IN RF OUT
VIDEO VIDEO
IN
OUT
caja de TV por
cable/satelital
Y
L
L
VIDEO
OUT
S-VIDEO
OUT
AUDIO OUT
OUT
PB/CB
R
L
ANTENNA
R
R
P
R/CR
IN
OUT
S-VIDEO
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
(
)
EL1
o
cable de video RCA
cable de audio RCA
cable de S-video
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
ES 95
E7H51UD.indd 95
2007/02/19 18:23:54
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación Básica
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Presione [OPEN/CLOSE A] para abrir
la bandeja de discos e insertar su
disco con el rótulo aupntando hacia
arriba.
1
2
Presione [STANDBY-ON y].
* Asegúrese de que el disco sea
compatible con este
Encienda el televisor. Seleccione la entrada a
1
la cual está conectado el aparato.
aparato.(Para obtener la lista
de discos compatibles
Utilice [K / L] para seleccionar su
consulte la página 31.)
idioma deseado, y luego presione
[OK] para establecerlo.
2
Para seleccionar un modo de
grabación presione [REC MODE].
Initial Setup
SP(2Hr)
0:58
OSD Language
English
Français
Español
Calidad del video
y el sonido
Modo de
grabación
Tiempo de
grabación
Disco de 8 cm Disco de 12 cm
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr) 108 min
18 min
36 min
45 min
54 min
72 min
60 min
120 min
150 min
180 min
240 min
360 min
Buena
Utilice [K / L] para seleccionar el tipo
de señal de emisión, y luego presione
[OK].
3
Deficiente
Ajuste inicial
Presione [DTV/TV] para seleccionar
TV analógica o TV digital, luego y
Ajuste de Canal
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
3
4
utilice [CHANNEL
/
] o [los
Antena
Cable (Analógico)
Cable (Analógico/Digital)
botones numéricos] para seleccionar
un canal que se desee grabar.
CH 12
El equipo comenzará a obtener los canales
disponibles en su región.
Presione [REC I] para iniciar la
grabación.
Presione [OK] para activar “Ajste
Manual de Reloj”.
4
5
Ajuste inicial
Para configurar la grabación a un toque
con temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC I] repetidamente hasta que aparezca
en la pantalla del televisor la longitud deseada de
grabación (30 minutos a 6 horas).
Ajste Manual de Reloj
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
Comenzará la grabación a un toque con temporizador.
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice [K /
para seleccionar el contenido de su
preferencia, y luego presione [OK].
I
0:30
L]
0:30
(grabación normal)
1:00
Ajuste inicial
6:00
5:30
Ajste Manual de Reloj
ENE / 01 / 2007 ( LUN )
12 : 00 AM
• Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado,
presione [STOP C].
Para de tener la grabación presione
[STOP C].
96 ES
5
E7H51UD.indd 96
2007/02/19 18:23:54
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación con Temporizador
Usted puede programar el equipo para que grabe hasta 12
programas, con un mes de anticipación. También hay
disponibles grabaciones de programas diarias o semanales.
Antes de grabar, asegúrese de que
• Antes de establecer una programación del temporizador
configure el reloj.
Presione [TIMER].
1
2
Utilice [K / L] para seleccionar “Prog.
nuevo”, y luego presione [OK].
Programaci. con Reloj
• Inserte un disco grabable con suficiente espacio libre.
LUN ENE/01 11:00AM
Fcha
Empieza Termina
Prog. nuevo
CH
STANDBY-ON
Configure una programación del
temporizador.
SOURCE
.@/:
DT
LAY OPEN/CLOSE
5
A
3
4
5
ABC
DEF
1
GHI
4
2
3
MNO
6
Presione [OK].
JKL
5
TUV
PQRS
WXYZ
7
8
9
SPACE
CLEAR
Presione [STANDBY-ON y] para
configurar una programación del
temporizador.
El indicador TIMER REC del panel frontal se iluminará.
.
0
2
DISC MENU
SE
o
s
B
OK
p
Configure la fecha.
TITLE
ETURN
Fcha
ENE/02
CH
Empieza
- - : - -
Modo
SP
Termina
- - : - -
o
p
4
B
j
F
i
B
DTV125. 1
SP
2 : 00
h
g
C
Configure las horas de inicio y finalización.
CHANNEL
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
- - : - -
o
--
+
B
REC MODE
TIMER
AUDIO
DTV125. 1
SP
p
SP
2 : 00
REC
Seleccione un modo deseado de entrada y el canal
a grabar.
Para obtener más detalles, consulte “How to select a
channel number for the timer recording” en la página
37 del manual del usuario.
1
I
CM SKIP
RAPID PLAY
ej.) modo digital
o
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
1 : 00AM
s
B
B
p
DTV125. 1
SP
SP
1 : 00
Seleccione un modo de grabación.
Fcha
ENE/02
CH
Empieza
12 : 00AM
Modo
Termina
1 : 00AM
o
DTV125. 1
SP
SP
1 : 00
p
Reproducción
Abra la bandeja
de discos.
Inserte un disco.
Comience a
reproducir.
Detenga la
reproducción.
1
OPEN/CLOSE
2 3 4
C
B
A
ES 97
E7H51UD.indd 97
2007/02/19 18:23:55
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
98 ES
E7H51UD.indd 98
2007/02/19 18:23:56
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
ES 99
E7H51UD.indd 99
2007/02/19 18:23:56
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E7H51UD
1VMN23563 ★★★★★
E7H51UD.indd 100
2007/02/19 18:23:56
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|