EKB200
USB Controller Keyboard
Installation / Operation Instructions
Rev. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1 Introduction......................................................................................................................................................2
2 Delivery scope .................................................................................................................................................2
3 Specifications...................................................................................................................................................3
Installation...........................................................................................................................................................3
Installation...........................................................................................................................................................4
3.1 USB - Connection..................................................................................................................................4
3.2 Sunk-In Desk Installation.......................................................................................................................4
3.3 Key labels ..............................................................................................................................................5
3.4 Function check and Calibration at PC...................................................................................................5
3.5 Installation of JoyMap............................................................................................................................8
4 Operation.......................................................................................................................................................10
4.1 Assigning Windows functions with JoyMap - application ....................................................................10
4.2 EKB-200 Operation with PowerCon Management Software...............................................................14
1 INTRODUCTION
EverFocus USB Joystick Controller – EKB200 – is designed for facilitating network video surveillance such as
PTZ camera control. With its 3-axis joystick, 4 dedicated PTZ function keys (Iris+/-, Focus+/-) and other 12
free programmable switches running with EverFocus JoyMapper® keymapper, EKB200 helps users operate
EverFocus PowerCon® in a more intuitive way.
•
•
•
•
•
•
•
•
•
•
•
USB interface, plug and play
3-axis joystick for PTZ control function
Support standard HID class device with high compatibility
Industrial ID design
Industrial grade 3-axis joystick, long working life
Four predefined PTZ function keys: Iris+/-, Focus+/-
Twelve free assignable function keys
Panel mount kit in package
No external power supply requirement
Suitable for right-hand or left-hand operation
Dedicated EverFocus JoyMapper keymapper software for standard Windows operation
2 DELIVERY SCOPE
•
•
•
•
•
EKB200 USB keyboard with 1.8m USB cable
Quickly Installation Guide
Support CD (Acrobat Reader, User manual, EverFocus JoyMapper®, key label templates)
Panel Mount Kit
Reserve key labels
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3 SPECIFICATIONS
USB1.1 (USB2.0 compatible)
4 keys, Iris+, Iris-, Focus+, Focus-
12 keys
Interface:
PTZ function key:
Re-assignment key:
Default protocol:
USB HID class 3 axis Game controller
Desktop, Sunk-In
Mounting method:
Power/ power consumption:
Certification:
USB bus power 5 VDC/ 80mA (maximum)
CE/FCC class A
Microsoft® Windows XP, 2000, Vista
Operating system for EverFocus JoyMapper
application
1.8 meter/ Black
200.5 (W) x 200.5 (D) x 108.9 (H)
8.02” x 8.02” x 4.35”
0°C ~ 50°C
Length/Color of USB cable:
Dimension:
Environmental temperature:
Weight:
825g
Dimensions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
3.1 USB - Connection
Connect the USB-cable to the USB port of the PC or device, which supports EKB-200.
The EKB-200 is compatible to USB 1.1 and USB 2.0 interfaces. The EKB-200 will be detected by PC as
"USB, 3-Axis, 16 button gamepad".
3.2 Sunk-In Desk Installation
For sunk-in mounting is a cut-out in the panel required. The minimum dimensions are shown in drawing
below:
Back
Front
The fixation brackets in the package support a mounting in panels with a maximum thickness of 15 mm.
The drawing shows the mounting position of the fixation brackets.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Key labels
The EKB-200 provides exchangable key description labels. This allows the user to customize the key labels to
his application and the assigned key functions.
Example:
The label sheets have a size of 104 x 9.5 mm.
A key lable template form in *.doc and *.rtf format can be found at the service CD in the EKB-200 package.
3.4 Function check and Calibration at PC
In case of any problems with keys or joystick provides Microsoft Windows® provides a check and calibration
option in control panel.
1. Go to “Start” -> “Control Panel” -> “Printers and Other Hardware” -> “Game Controllers”.
2. Select “Properties”. In test mode, you can test the EKB200 controller by moving the joystick towards all end
stops including the third axis (X-axis, Y-axis & Z-axis) and pressing the buttons. If the controller is not
functioning properly, it may need to be calibrated. To calibrate it, go to the Settings page.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
In Settings mode, click “calibrate” button to do calibration.
4. In Device Calibration Wizard starting page, click “Next” to continue.
5. To find center point, leave the handle centered, then press a button on the controller. Click “Next” to
continue.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Move the handle in complete circles, then press a button on the controller. Click “Next” to continue.
7. To verify center point, leave the handle centered, then press a button on the controller. Click “Next” to
continue.
8. Move the Z axis all the way up and down, then press a button on the controller. Click “Next” to continue.
9. Calibration is completed. To save your calibration, click “Finish”.
10. Finally, click “Apply” button to apply the settings to EKB200.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Installation of JoyMap
The JoyMap tool allows the assignment of standard windows operations to the EKB-200.
Installation steps of JoyMap for EKB200:
Double click “Setup.exe” file.
The installer will guide you through the steps required to install JoyMap for EKB200 on your computer. Click
“Next” to continue.
3. Direct to the folder where you wish to install the program by pressing “Browse”. If you wish to install JoyMap
for yourself, select “Just Me”. If you allow anyone using this computer to use JoyMap, select “Everyone”. Click
“Next” to confirm.
4. The installer is ready to install JoyMap for EKB200 on your computer. Click “Next” to start the installation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5. With the message "Installation Complete" the JoyMapper setup is finished. Click “Close” to exit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4 OPERATION
4.1 Assigning Windows functions with JoyMap - application
NOTE:
The EverFocus JoyMapper application will only work correctly with connected EKB200 keyboards.
Other joystick devices are not supported. If no EKB200 is connected, the application will show
after start: "DEVICE: No EKB200 found".
1. Go to “Start” -> “Program” -> “EverFocus” -> “JoyMap” -> “JoyMap”.
2. Double click the JoyMap icon in the task bar to open JoyMap window.
3. Press “Program” -> “Settings” for general EKB200 parameters.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
JoyMapper will automatically starts with windows start.
Start with windows:
Run minimized:
JoyMapper window will be minimized if you check this box.
Delay time between the commands coming from the Joystick are read into the
application. 100ms means 10 times per second the USB port is read by the AP
and the read commands are processed. Default value is 100 mSec. It is
selectable from 40~1000 mSec.
Check input (mSec):
Select mouse sensitivity level. The higher the number, the more sensitive the
joystick simulation for mouse speed.
Mouse sensitivity:
Press “OK” to confirm or press “Cancel” to cancel the settings.
4. Profile: The Joymapper allows to setup different profiles for special key / joystick assignments to Windows
functions.
Press Profile
>
“Options”, 4 options are available:
New:
create a new profile
delete a profile
Delete:
Reset:
Save:
reset a profile to default values
save the profile
5. In “Special Keys”, there are 5 options: None, Mouse, System, Profile Switch and Application Switch.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the device as none if you are not using a special key for the device.
None:
Set mouse definition for the device. For example, for button 1, if you wish to set it as a left
click button, select left click and mouse definition will be shown in “key” column:
Mouse:
System:
Set system function for the device. There are 4 system functions available: power off,
suspend, hibernate, log off and reboot. For example, for button 2 if you wish to set it as a
power off button, select power off and system function will be shown in “key” column.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile Switch:
this is used to switch between profiles.
Application Switch:
this is used to switch between applications.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 EKB-200 Operation with PowerCon Management Software
The EKB-200 keyboard is supported in PowerCon management software from version 4.3.
In factory settings, the keys are assigned to following PTZ functions:
Key
Function
Joystick
Pan / Tilt / Zoom (fixed function)
Goto Preset 1
Goto Preset 2
Goto Preset 3
Goto Preset 4
Goto Preset 5
Goto Preset 6
Goto Preset 7
Goto Preset 8
Goto Preset 9
Goto Preset 10
Goto Preset 11
Goto Preset 12
Iris Open
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Iris Close
Focus Near
Focus Far
For editing the key settings, go to menu bar > System > Configuration > Tab EKB-200 Action List:
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a key in the list. Right click in the right corner of any field in the "Action" Column to open a context
menu with a selection of available PTZ commands.
If the command requires a value, such as GoTo Preset [x] or Tour [x], enter the number [x] in the field "Value".
"OK" saves the changes and closes Configuration menu, "CANCEL" closes menu without saving the
changes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
EverFocus Electronics Corp.
Head Office:
Europe Office:
12F, No.79 Sec. 1 Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886-2-26982334
FAX: +886-2-26982380
Albert-Einstein-Strasse 1
D-46446 Emmerich, Germany
TEL: +49-2822-9394-0
FAX: +49-2822-9394-95
USA L.A. Office:
China Office:
1801 Highland Ave. Unit A
Duarte, CA 91010, U.S.A.
TEL: +1-626-844-8888
FAX: +1-626-844-8838
Room B-05D-1, KESHI PLAZA ,
Shangdi Information Industry Base,
Haidian District, Beijing China
100085
TEL: +86-10-62973336/37/38/39
FAX: +86-10-62971423
USA N.Y. Office:
415 Oser Avenue Unit S
Hauppauge, NY 11788
TEL: 631-436-5070
FAX: 631-436-5027
Japan Office:
1809 WBG MARIBU East 18F,
2-6 Nakase.Mihama-ku.
Chiba city 261-7118, Japan
TEL: +81-43-212-8188
FAX: +81-43-297-0081
P/N: MKB2G00110
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|