Euro Pro Carpet Cleaner EP63CH User Manual

One (1) YEAR LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of purchase when utilized for normal  
household use.  
If your appliance fails to operate properly while in use under normal household conditions within  
the warranty period, return the complete appliance and accessories, freight prepaid to EURO-  
PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901. If the appliance is  
found by EURO-PRO Operating LLC to be defective in material or workmanship, EURO-PRO  
Operating LLC will repair or replace it free of charge. Proof of purchase date and $7.00 to cover  
the cost of return shipping and handling must be included. *  
Steamer Steam Cleaner  
Use and Care Instructions  
Model EP63CH  
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement  
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to  
any unit that has been tampered with or used for commercial purposes. This limited warranty  
does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty  
packaging or mishandling in transit.  
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or  
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the  
specific obligations expressly assumed by it under the terms of the limited warranty. In no event  
is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature  
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential  
damages, so the above may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  
purchase date and to attach tag to item before packing with your name, complete address  
and phone number with a note giving purchase information, model number and what you  
believe is the problem with item. We recommend you insure the package (as damage in  
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION  
CUSTOMER SERVICE”.  
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy  
OWNERSHIP REGISTRATION CARD  
Please fill out and mail the product registration card within ten (10) days of purchase. The  
registration will enable us to contact you in the unlikely event of a product safety notification. By  
returning this card you acknowledge to have read and understood the instructions for use, and  
warnings set forth in the accompanying instructions.  
RETURN TO:  
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901  
EP63CH  
_____________________________________________________________________  
Appliance model  
_____________________________________________________________________  
Date purchased  
Name of store  
EURO-PRO Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
_____________________________________________________________________  
Owner’s name  
_____________________________________________________________________  
Address  
City  
State  
Zip code  
Tel.: 1 (800) 798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Steam Cleaner Tools (Attachments)  
CAUTION: Before removing or attaching a tool, make certain that the  
Steam Cleaner is disconnected from power source.  
CAUTION:  
The force and heat of the steam may adversely affect certain materials.  
Always check the suitability of using the steam cleaner on a surface by  
carrying out a preliminary test on a hidden area.  
A. Large Squeegee  
B. Steam Brush Attachment with 3 Small Brushes and 1 Large Triangle Brush.  
C. Garment Steamer Attachment.  
Examples for guidance only: - Varnished wood or glossy leather can be  
bleached by the effects of steam.  
A. SQUEEGEE ATTACHMENT can be fitted with large squeegee. See Fig. 3  
Loosen squeegee screw and slide in squeegee, then tighten screw until  
locked in place. The attachment is used for cleaning windows, mirrors,  
glass, bathroom tile and other large hard surfaces. Connect squeegee  
attachment to main unit by sliding together until locked in place. To  
release, press grey attachment release button on bottom of main unit.  
- Shiny plastic materials risk being tarnished.  
- Acrylic, velvets and linen are very sensitive  
to the temperature of steam.  
The manufacturer accepts no responsibility for damage caused to objects,  
materials, animals or persons due to the inappropriate use of steam, and  
through ignoring the advice and recommendations set down in the Use  
and Care Instruction Book.  
CAUTION: Thermal shock can shatter glass surfaces. Before steam cleaning  
these surfaces, carefully warm the surface by directing steam on  
surface from a distance of no less than 4-6 inches.  
Note: When using squeegee attachment, apply steam liberally, then wipe dry  
with squeegee. Keep towel handy and wipe excess water accumulated on  
bottom of window. Take care to dry squeegee after every pass. It might also  
be necessary, when finished, to wipe the bottom area where liquid may have  
accumulated.  
B. STEAM BRUSHES attach to tip of Steam Brush Attachment. The three  
(3) small brushes are labeled A, B, C so you can choose different areas of  
the home to use each one. For example, Bathroom, Kitchen & Garage.  
Connect Steam Brush Attachment to main unit by sliding together until  
locked in place. To release, press grey Attachment Release Button on  
bottom of main unit. Steam Brush Attachment offers a concentrated flow  
of steam for cleaning hard to reach surfaces like crevices and also  
scrubbing imbedded dirt while treating a surface with steam.  
C. GARMENT STEAMER ATTACHMENT can be used to steam out  
wrinkles in clothing or curtains. Connect Garment Steamer Attachment to  
main unit by sliding together until locked in place. To release, press grey  
Attachment Release Button on bottom of main unit.  
CAUTION: Only press steam push button intermittently (once every second  
or once every 2 seconds otherwise you may get hot water  
exiting from steam holes. Press steam push button and wait for  
steam pressure to begin reducing before pressing steam push  
button again. You will achieve a rhythm where continuous and  
powerful steam flow can be achieved.  
2
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning Hard Surfaces with the EURO-PRO Steam Cleaner  
WARNING: To reduce risk of  
injury from steam, never point  
Garment Steamer at people,  
animals or electrical outlet.  
WARNING:  
Never  
add  
anything except cool water to  
tank. Use water only, any other  
liquid may be dangerous.  
• High temperature steam can make it easier to remove stubborn household dirt  
from hard surfaces. Use your EURO-PRO Steam Cleaner to loosen and remove  
hardened food, mildew, soap scum, dirt and grime in all areas of your home  
without using any cleaning solution.  
• Steam dissolves dirt on windows and mirrors. You can have your windows and  
mirrors sparkling clean without using any chemical glass cleaners which often  
leave a residue.  
• High temperature “dry” steam can reduce the amount of germs, mold and mildew  
on hard non-porous surfaces in your home. The kitchen, bathroom and nursery  
are areas in your home where you might find fungus and bacteria. Regularly  
sanitizing hard surfaces in these areas in your home can reduce bacteria and  
odors. Use the EURO-PRO Steam Cleaner regularly to sanitize toilet bowls,  
changing tables, counter tops, sinks, diaper pails and other hard non-porous  
surfaces.  
J. Garment Steamer Attachment  
L. Large Squeegee  
A. Base of Main Unit  
B. Steam Push Button  
C. Power Light  
M. 20 Foot Power Cord  
N. Attachment Release Button  
O. Crevice Between Main Unit &  
Steam Brush Attachment  
P. Water Tank Base  
D. Indicator Light  
E. Window Cleaning Attachment  
F. Steam Brush Attachment  
G. Small Steam Brush  
H. Large Triangle Steam Brush  
I. Removable Water Tank  
Q. Squeegee Screw  
Sanitizing with the EURO-PRO Steam Cleaner  
To reduce dust mites and to sanitize, treat surfaces with steam for 20 seconds,  
holding the steam outlet less than 2 inches away from the surface.  
WARNING: High temperature steam from the EURO-PRO Steam Cleaner  
can reduce bacteria and dust mites in your home, however, the steam may  
not reach and/or kill all bacteria and dust mites on a specific surface being  
treated. Therefore, some bacteria can remain after surface has been  
treated with hot steam.  
Note: You may have some water exit on first burst. This is normal,  
just keep pushing the steam button intermittently and you will  
obtain a continuous flow of steam.  
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling the Water Tank  
Operating Your EURO-PRO Steam Cleaner  
WARNING: Always disconnect (unplug) the Garment Steamer from power  
source before filling with water.  
Your EURO-PRO Steamer Steam Cleaner is a very versatile tool. Used  
correctly it will help make many household cleaning tasks faster and easier.  
Be sure to carefully read all the information contained in this booklet before  
using this appliance.  
The Water Tank is the blue translucent tank at the end of the Garment Steamer.  
See Fig. 2.  
1. Remove the Tank by unscrewing it from the base unit by turning in a counter  
clockwise motion.  
2. Remove the Water Tank base by turning in a counter clockwise motion.  
3. With cool water*, fill Water Tank completely and then replace water tank base  
by turning in a clockwise motion until snug.  
4. To reattach water tank to main unit, line up water tank fittings with fittings  
receptacles on main unit. Push water tank in, then turn in a clockwise motion.  
*Note: We suggest mixing distilled water or demineralized water with tap water -  
1part tap water to 3 parts distilled or demineralized water. Doing so will  
lengthen the life of the Steamer.  
WARNING: With steam brush attachment assembled on unit - Do  
not press Steam Push Button more than once per  
second. Pressing steam push button quickly may  
cause hot water to accumulate between attachment and  
main unit which could then leak through crevice and  
burn user’s hand.0  
CAUTION: Never add anything except cool water or you will cause damage  
to the heating element. Use water only, any other liquid may  
be dangerous.  
CAUTION: Press steam  
push button intermittently no  
more than once every 1 or 2  
seconds. Rapid pressing in  
CAUTION: First usage may  
require 6-10 rapid pushes on  
steam push button before steam  
exits. Keep pressing for a few  
Power Cord  
Before usage, remember to completely untangle or unwrap the full length of the  
power cord.  
succession will cause water  
seconds until steam has  
leaking. Wait for steam  
developed from first rapid  
pressure to reduce before  
depressing of steam push  
Power Light/Indicator Light  
pressing steam push button  
button, then you can continue  
The red light will illuminate when power is on - (unit is plugged into socket), green  
light will go on and off during usage. Maximum temperature is achieved when green  
light is illuminated. Before pushing steam push button the first time per usage, wait  
until green light is illuminated. Following first usage, green light will go on and off. If  
too much water is exiting steam holes, you are pressing steam push button too  
rapidly. Stop pushing steam push button and wait for green light. Do not press  
steam push button more than once per second or once per 2 seconds.  
again. By pressing  
intermittent pressing of steam  
intermittently you will note a  
push button.  
rhythm for maintaining a  
continuous flow of steam  
without any water dripping  
or leaking.  
Note: You may have some water exit on first burst. This is normal, just keep  
pushing the steam button intermittently and you will obtain a continuous flow  
of steam.  
Note: You may have some water exit on first burst. This is normal, just  
keep pushing the steam button intermittently and you will obtain a  
continuous flow of steam.  
Steam Push Button  
The steam push button is pumping water to the heating element. Continuous  
steam can be attained if steam push button is depressed intermittently once every  
one or two seconds. You will notice a rhythm can be maintained while pressing  
steam push button which will maximize steam performance. Press steam push  
button and wait until you see steam pressure reduced then press steam push  
button again (approximately once every one or two seconds).  
Important Note: After refilling or before each usage, it may take 6-10 presses on the  
steam push button before steam will begin to exit. Press steam push button  
repeatedly until first steam exists, then patiently press steam push button not more  
than once every one or two seconds and eventually a momentum of steam will  
develop. If you press too many times before steam exits, hot water may accumulate  
and burn user’s hand if steam brush attachment is assembled on main unit.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  

Euro Pro Iron EP924H User Manual
Extron electronic Stereo Receiver DVI DL 201 Rx User Manual
Faber Ventilation Hood 630000815 User Manual
Fisher Price Baby Toy 77949 User Manual
Fisher Price Motorized Toy Car W6199 User Manual
FUNAI DVD VCR Combo DVD3315V User Manual
GE Freezer FUF21SVR User Manual
GE Iron 169173 User Manual
Generac Power Systems Portable Generator 0043734 User Manual
GE Water Dispenser GNSV70FBL User Manual