Control Surface Manual
Document Revision: 1.1
Part Number: 840-08758-02
Release Date: September, 2003
Euphonix, Inc.
220 Portage Ave.
Palo Alto, California 94306
Phone:
Fax:
650-855-0400
650-855-0410
Web:
e-mail:
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
groundingprong. Thewiderbladeorthethirdprongareprovidedforyoursafety. Iftheprovided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
Download from Www.Somanuals.com. All Manuals Search And Download.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) WARNING–TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.
16) Do not expose this equipment to dripping or splashing and ensure that no objects filled with
liquids, such as vases, are placed on the equipment.
17) To completely disconnect this equipment from the AC Mains, disconnect the power supply
cord plug from the AC receptacle.
18) The mains plug of the power supply cord shall remain readily operable.
19) This unit is provided with a power supply cord set suitable for 120V AC input only (for U.S.A.
and Canada). For other than U.S.A. and Canada, a qualified person must provide for use with
this unit, an appropriate, approved power supply cord set which is in compliance with the end
2
use country requirements and has a minimum cross-sectional area of 1.0mm .
20) For units with more than one power cord:
Caution: This unit has more than one power supply cord. Disconnect two power supply
cords before servicing to avoid electrical shock.
Attention: Cet appareil comporte plus d’un cordon d’alimentation. Afin de prévenir les
chocs électriques, débrancher les deux cordons d’alimentation avant de faire le
dépannage.
21) Operator Accessible Fuse:
Caution: For continued protection against risk of fire, replace only with same type and
rating of fuse.
Attention: Pour ne pas compromettre la protection contre les risques d’incendie, remplacer
par un fusible de même type et de même caractéristiques nominales.
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Table of Contents
Overview.........................................................................................................7
Initiating Self Test...........................................................................................9
Switch and Knob Test.....................................................................................9
LED Test.......................................................................................................10
Fader Test......................................................................................................10
Display Test ..................................................................................................11
Memory Test.................................................................................................11
Selecting and Adjusting the Onscreen Display.......................................................12
Power ............................................................................................................16
Environmental Requirements........................................................................16
Dimensions....................................................................................................17
Internal Components.....................................................................................19
Fans...............................................................................................................20
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
List of Figures
Typical Console Layout ......................................................................................................7
CM404 Rear Panel ..............................................................................................................8
CM416 Rear Panel ..............................................................................................................8
Control surface self-test keys ..............................................................................................9
12
13
13
14
Changing the CM416 ID ...................................................................................................15
Side Dimensions ...............................................................................................................17
CM416 Bottom Dimensions .............................................................................................17
CM404 Bottom Dimensions .............................................................................................18
Max Air Top Dimensions .................................................................................................18
CM404 ..............................................................................................................................19
CM416 ..............................................................................................................................19
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
System Startup Sequence
See page 21 in the Max Air Operation Manual for the system startup sequence.
Description
The Max Air Console consists of a configurable number of Control Modules that com-
prise the Control Surface. The Max Air Control Surface is the digital control center for
all Max Air system components and communicates with them via Ethernet network
connections. Control signals are transmitted via the Ethernet switch and distributed to
the Max Air system components. No audio passes through the Control Surface.
Overview
The Max Air console must contain a CM404 center section module and can have up to
three fully loaded CM416 16-channel Modules, each with 16 physical faders. The system
can have up to 48 faders, not including the eight faders in the CM404 master section.
The CM416HL and CM416HR are half-loaded (left or right) 8-fader modules that can
be used to expand your system.
CM416
Sixteen-channel Module
CM404
Center Section
CM416
Sixteen-channel Module
Figure 1 Typical Console Layout
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Rear Panels
INTERNAL
EXTERNAL
TALKBACK MIC TALKBACK MIC
SERVICE
AC IN 1
AC IN 2
SERIAL 1
SERIAL 2
T
5.0 AH
250
V
Caution:
To prevent risk
of fire, replace
fuse with the
same type and
rating.
~100-240V
AC
TO KVM
EXTENDER
50-60 Hz
250 Watts
MOUSE
LAN
CM404
KEYBOARD
Figure 2 CM404 Rear Panel
AC IN 1
AC IN 2
T
5.0 AH
250
T
5.0 AH
250
V
V
Caution:
To prevent risk
of fire, replace
fuse with the
same type and
rating.
Caution:
To prevent risk
of fire, replace
fuse with the
same type and
rating.
~100-240V
AC
~100-240V
AC
50-60 Hz
250 Watts
50-60 Hz
250 Watts
LAN
SERVICE
SERIAL 1
SERIAL 2
CM416
Figure 3 CM416 Rear Panel
Power Connectors (IEC): Accepts two standard IEC power cords (provided). Two au-
toranging switching supplies accept voltages between 100–240 VAC, 50–60 Hz.
LAN Port (RJ45): Connect to EuCon Network Hub via RJ45 through the console
ethernet harness (provided).
To KVM Extender (RJ45): Connection to KVM extender (CM404 only)
Talkback (XLR): Connection to the internal and external talkback microphones.
Keyboard and Mouse (PS2): Connection to the keyboard and mouse or trackball.
Serial 1, 2 (DB9): RS232 serial ports (for service only).
Service (DB15HD, PS2): VGA video and keyboard connection (for service only).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Self Test Procedure
The following pages describe the operation of standalone self-test software for the Max
Air control modules. The self-test code is designed to be invoked in a module right after
power-up and before the Single Board Computer (SBC) downloads code.
Initiating Self Test
Enter self-test by pressing the self-test enter keys shown below. This must be done be-
fore the SBC code download. If code download from the SBC occurs during the self-
test, the module automatically exits self-test and executes the downloaded code. Use
the keys shown below to perform the different tests. After entering the test, use the de-
tailed description of each test on the following pages to navigate through different
modes within a test.
PUSH
Group
4
Group
5
Group
5
Group
5
Group
5
Group
5
Group
4
Group
4
1
9
2
3
5
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
5
6
7
8
1
9
2
3
5
6
7
8
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48
17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48 41 42 43 44 45 46 47 48
Talkback Mic
Aux
4
Aux
5
Aux
5
Aux
5
Aux
5
Aux
5
Aux
5
Aux
5
1
9
2
3
5
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
1
9
2
3
4
6
7
8
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24
17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24 17 18 19 20 21 22 23 24
Mix
D
Mix
D
Mix
E
Mix
E
Mix
D
Mix
E
Mix
D
Mix
E
A
B
C
E
F
G
H
A
B
C
E
F
G
H
A
B
C
D
F
G
H
A
B
C
D
F
G
H
A
B
C
E
F
G
H
A
B
C
D
F
G
H
A
B
C
E
F
G
H
A
B
C
D
F
G
H
Knobset
Select
*
*
*
*
*
*
*
*
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Ins Inp
Dyn
Expand
In Out
Aux
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
Filt
Filt
Filt
Filt
Filt
Filt
Filt
Filt
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Aux
Mix
Pan
Mix
Group
Bus
Group
Bus
Group
Bus
Group
Bus
Group
Bus
Group
Bus
Group
Bus
Group
Bus
Mix-
Mix-
Mix-
Mix-
Mix-
Mix-
Mix-
Mix-
Switch #
Switch #
Oscillator
Monitors
XXXX
On
XXXX
Select
Select
Select
Select
Select
Select
Select
Select
Enter Self Test
Setup
R
W
G
Switch Value
Switch Value
Solo
XXXX
On
On
On
On
On
On
On
On
XXXX
Control Room
Setup
Dim
Cut
Select
Select
Select
Select
Select
Select
Select
Select
Main
Level
Spkrs
Alt
1
Clear
Solo
Spkrs
On
On
On
On
On
On
On
On
Alt
2
R
W
G
Spkrs
Setup
Setup
Enter Self Test
Dyn
Comp
Exp
Select
Select
Select
Select
Select
Select
Select
Select
/
Gate
Attack
Release
Depth
On
On
On
On
On
On
On
On
Dyn
Select
Select
Select
Select
Select
Select
Select
Select
Select
Soft
Knobs
Dyn In
EQ
In
Threshold
Ratio
Gain
Knob #
Soft Knobs
Knob #
On
On
On
On
On
On
On
On
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Copy
Paste
Swap
Aux
Masters
Aux
Sends
All
Group Bus
Masters
T
alk
T
alk
T
alk
T
alk
T
alk
T
alk
T
alk
T
alk
Clear
Copy
Link
*
Shelf
Shelf
Low
Q
Lo Mid
Q
Hi Mid
Q
High
Q
Swap Channel
Swap Channel
Swap Channel
Swap Channel
Swap Channel
Swap Channel
Main Channel
Swap Channel
Main Channel
Swap Channel
Main Channel
Mix
Masters
Knob Value
Knob Value
To
Main Channel
Main Channel
Main Channel
Main Channel
Main Channel
Faders
Low Freq
Lo Mid Freq
Hi Mid Freq
High Freq
Function
Select
Setup
LEDs
Chan
Select
Faders
Chan
Select
Displays
Chan
Select
Memory
Chan
Select
Version
Chan
Select
XXXX XXXX
Chan
Select
LEDs
Faders
Chan
Select
Displays
Chan
Select
Memory
Chan
Select
Version
Chan
Select
XXXX XXXX
Chan
Select
Chan
Select
Chan
Select
Chan
Select
Chan
Select
Chan
Select
Workstation
Setup
Talkback
/
Slate
Solo
On
Solo
On
Solo
On
Solo
On
Solo
On
Solo
On
Solo
On
Solo
Solo
Solo
On
Solo
On
Solo
On
Solo
On
Solo
On
Solo
On
Solo
Talk
To
Custom
All
Band
In
Band
In
Band
In
Band
In
Low Gain
Lo Mid Gain
Hi Mid Gain
High Gain
On
On
S
On
Talk
To
Talk
To
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Mon
A
Mon
B
Insert
Pan
Custom
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
M
S
L
EQ
In
EQ
Select
Soft
Knobs
Setup
In
A
Select
Select
Layouts Snapshots Knobsets
Custom
Filters
LPF HPF BPF NCH
LPF HPF BPF NCH
Type
Filters
Select
Type
B
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
7
4
1
8
5
2
0
9
6
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
C
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Lock ST
Mix-
Soft
Knobs
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
6
0
6
In
In
In
In
Surround
Filter
1
Filter
2
D
LTM
Input
Input
A
B
Input
E
Input
Select
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
RTM
A
B
On
On
Hi
Z
HPF
3
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
clip
0
Enter Other Tests
Enter Other Tests
F
In
Front Pan
Balance
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
48
V
Soft
Knobs
12
24
48
72
3
6
2
24
48
72
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
12
24
48
72
3
6
2
24
48
72
6
Mic Gain
Trim
Clear
Enter
G
Pan Soft
Select Knobs
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
12 30
24
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
H
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
36
42
48
60
72
Selected
Channel
One Shot
Setup
Setup
Figure 4 Control surface self-test keys
Switch and Knob Test
Momentary Switch Press
Pressing any switch toggles the switch value display from 00 to 01 and shows the
switch number in the display.
Knob Value Display
Turning any knob displays the hex value (00–60) of the knob and shows the knob num-
ber in the display.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
LED Test
LED loop
This switch cycles through all the LED colors.
Color Toggle
These switches light all the LEDs of each color: green, red, yellow, orange
All LEDS
This turns all LEDs on.
NOTE: To avoid overheating, the module should not be left with All LEDS on for more
than 5 minutes.
Fader Test
All Fader Up
All faders all the way up.
All Fader Down
All faders all the way down.
Fader Echo Test
All faders follow the one fader touched.
Fader Loop Test with Speed Control
All faders cycle up and down at the speed determined by the speed control knob. This
fader cycle test times out after 5 minutes to protect the faders from burning out.
Backstop PFL Switch Test
The Backstop PFL display lights up when a fader is pulled back to enable its backstop
PFL switch. This mode is always active.
Fader I/O
•
Fader Write value display
Any value written to a fader is displayed in its designated fader write intelligent
display. This mode is always active in fader test mode.
•
Fader Read value display
All faders are continuously read and the read value is displayed in its designat-
ed fader read intelligent display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Display Test
Clear All
Char Up
Char Down
Char E
Char W
Enumerate
Memory Test
ROM Test
This test reads the ROM and computes and displays the checksum. The user/tester can
match the checksum to a known good checksum (see below) to make sure ROM test is
successful.
CM404 Checksum - 6514
CM416 Checksum - D308
RAM Test
This tests the upper unused portion of the CPU board RAM. The Pass display shows
up when the test is done.
PC104 RAM Test
This test writes and reads the whole PC104 RAM and checks for errors. The Pass dis-
play shows up when the test is done.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Selecting and Adjusting the Onscreen Display
The Touchscreen image controls are found on the panel behind the Touchscreen. If
the image needs adjustment, access press the Menu button and follow the onscreen
instructions.
Figure 5
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Touchscreen Alignment
The Max Air Touchscreen can be calibrated using the Elo Touchscreen utility. Note
that different users may have slightly different ways of touching the screen. If an oper-
ator finds they often miss onscreen objects, re-calibrate the touchscreen:
1. Select Control Panel from the Start menu.
Figure 6
2. Double-touch Elo Touchscreen.
Figure 7
The Elo popup appears.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Figure 8
3. Touch Align and follow the onscreen instructions.
When asked to touch the targets on the screen, best results are achieved by touching the
targets naturally without thinking too much about it. This aligns the touchscreen to an
individual’s hand-eye coordination.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Changing the ID of a CM416 Module
1. Power cycle the module and then simultaneously press and hold the two lower
knobs on the first strip before the module connects to the System PC (you have
about 15 seconds).
Select
Select
Select
Select
Select
Select
Select
Select
Change ID
On
On
On
On
On
On
On
On
Select
Select
Select
Select
Select
Select
Select
Select
On
On
On
On
On
On
On
On
Select
Select
Select
Select
Select
Select
Select
Select
On
On
On
On
On
On
On
On
Select
Select
Select
Select
Select
Select
Select
Select
On
On
On
On
On
On
On
On
Copy
Paste
Copy
Paste
Copy
Paste
Copy
Paste
Copy
Paste
Copy
Paste
Copy
Paste
Copy
Paste
Figure 9 Changing the CM416 ID
2. Set the ID using the first strip only in each CM416. Do not set the ID using strip
nine.
The CM416 displays shows “Position – 0000 Use 1st fader to set module position.”
3. Move the fader on strip one to select the ID.
The ID appears as a hexadecimal number (0=ID 1, 1=ID 2, 2=ID 3, 3=ID 4,
4=ID 5, 5=ID 6).
4. Press strip one’s fader Select key to commit to the new ID.
The module continues to boot only after committing to the change.
System Ethernet IP Addresses
System Computer
Interface Pilot
192.168.0.1
ID 9
ID 1
ID 10
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
192.168.0.208
192.168.0.200
192.168.0.19
192.168.0.10
192.168.0.11
192.168.0.12
192.168.0.13
192.168.0.14
192.168.0.15
Digital Pilot
CM404
CM416
Strip 1
Strip 9
Strip 17
Strip 25
Strip 33
Strip 41
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Technical Specifications
Power
Voltage
90–254 VAC (RMS), 50/60 Hz
Power Consumption
2 x 50 W per module
1.0 A (US 117 V)
0.5 A (Europe 230 V)
1.0 A (Japan 100 V)
Inrush Current
Fuse
25 A
T5 A
Heat Dissipation
CM404
CM416
520 BTU/hr
600 BTU/hr
CM416H 520 BTU/hr
Environmental Requirements
Operating Temperature
Storage Temperature
Humidity
0–35°C (Ambient)
-10 to 55°C
0–90% non-condensing
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Dimensions
16.25
75.00°
Dimensions in inches
16.13
15.625
8.39
6.78
3.06
2.06
1.20
0
Figure 10 Side Dimensions
0
0
.902
.900
KEEP CLEAR FOR
VENTILATION
11.723
12.827
KEEP CLEAR FOR
VENTILATION
1/4-20 THREADED
INSERT 8 PLACES
23.400
24.300
23.648
24.300
Figure 11 CM416 Bottom Dimensions
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
0
.90
1.79
KEEP CLEAR
FOR PROPER
VENTILATION
1/4-20 THREADED
INSERT 8 PLACES
19.46
21.40
22.30
Figure 12 CM404 Bottom Dimensions
35.43
29.58
0.00
5.85
0.00
1.0
1.0
Figure 13 Max Air Top Dimensions
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
User Reference
Internal Components
Dual Power
Connections
Power
Distribution
Dual Power
Supplies
Single Board
Computer
KVM Extender
Figure 14 CM404
Dual Power
Connections
Dual Power
Supplies
Power
Distribution
Single Board
Computer
Figure 15 CM416
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Euphonix Max Air Control Surface Manual
Fans
The CM416 modules have low-noise internal fans and a thermal sensor between the
displays on strips five and six. If a module gets too hot, the fans automatically turn on
at a low or high speed depending on the temperature. The fans turn off automatically
when the internal temperature returns to normal.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|