Echo Trimmer HC 165 185 User Manual

X7722271404 / X772000164  
HC-165/185  
Hedge Clipper  
Operator’s Manual  
Burn Hazard  
The muffler or catalytic muffler and surrounding cover may become extremely hot.  
Always keep clear of exhaust and muffler area, otherwise serious personal injury may  
occur.  
The engine exhaust from this product contains chemicals known to the State of California to cause  
cancer, birth defects or other reproductive harm.  
Users of this equipment risk injury to themselves and others if the unit is used  
improperly and/or safety precautions are not followed. ECHO provides an operator’s  
manual and a safety manual. Both must be read and understood for proper and safe  
operation. Failure to do so could result in serious injury.  
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time  
of publication, but are subject to change without notice. Illustrations may include optional equipment and  
accessories, and may not include all standard equipment.  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HC-165/185  
INTRODUCTION  
INTRODUCTION  
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and  
on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both  
easy to use and full of helpful operating tips and SAFETY messages.  
The Operator’s Manual  
Keep it in a safe place for future reference. Contains specifications and information for safety, operation,  
maintenance, storage and assembly specific to this product.  
The Safety Manual  
Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to  
insure safe operation.  
SERVICING INFORMATION  
Parts/Serial Number  
Genuine ECHO Parts and ECHO REPOWER™ Parts and  
Assemblies for your ECHO products are available only from an  
Authorized ECHO Dealer. When you do need to buy parts always  
have the Model Number and Serial Number of the unit with you. You  
can find these numbers on the engine housing. For future reference,  
write them in the space provided below.  
Model No. _________________ SN. ___________________  
Service  
Service of this product during the warranty period must be performed by an Authorized ECHO Service  
Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or  
call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your  
unit for Warranty service/repairs, proof of purchase is required.  
Echo Consumer Product Support  
If you require assistance or have questions concerning the application, operation or maintenance of this  
product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:30 am to  
4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial  
number of your unit.  
Warranty Registration  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at  
product confirms your warranty coverage and provides a direct link between you and ECHO if we find it  
necessary to contact you.  
X7502255307  
3
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
SAFETY  
HC-165/185  
Additional or Replacement Manuals  
For more information  
scan this QR code.  
Replacement Operator, Safety Manuals, and Parts Catalogs  
or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich,  
IL 60047 (800-673-1558). Always check the ECHO Web Site for  
updated information.  
Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.  
SAFETY  
Manual Safety Symbols and Important Information  
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational  
messages preceded by symbols or key words. The following is an explanation of those symbols and key  
words and what they mean to you.  
The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition  
which WILL lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition  
which CAN lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition  
which may lead to minor or moderate personal injury if not avoided.  
The enclosed message provides information necessary for the protection of the unit.  
Note: This enclosed message provides tips for use, care and maintenance of the unit.  
CIRCLE AND SLASH SYMBOL  
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result  
in serious or fatal injury.  
4
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
HC-165/185  
SAFETY  
International Symbols  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Carburetor  
Adjustment - Low  
speed mixture  
Carburetor  
Adjustment - High  
speed mixture  
Read and  
understand  
owners manual.  
Fuel and oil  
mixture  
Wear eye, ear  
and head  
Carburetor  
Adjustment - Idle  
speed  
Finger severing  
Hot Surface  
Safety/Alert  
protection  
Avoid all power  
lines. This unit is  
not insulated  
against electrical  
current.  
Do not operate  
closer than 15 M  
(50 ft.) from  
Emergency Stop  
electrical hazard.  
Wear hand and  
foot protection.  
Use two handed  
Plan retreat path  
from falling  
objects  
DO NOT smoke  
near fuel  
Primer Bulb  
Choke Control  
“Cold Start”  
Position (Choke  
Closed)  
DO NOT allow  
flames or sparks  
near fuel  
Ignition  
ON / OFF  
Wear slip  
resistant footwear  
Do not operate  
without guards in  
place.  
Choke Control  
“Run” Position  
(Choke Open)  
Keep bystanders at least  
4.5 meters (15 ft.) away.  
Personal Condition and Safety Equipment  
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety  
precautions are not followed. Proper clothing and safety gear must be worn when operating unit.  
Physical Condition  
Your judgment and physical dexterity may not be good:  
• if you are tired or sick,  
• if you are taking medication,  
• if you have taken alcohol or drugs.  
Operate unit only if you are physically and mentally well.  
X7502255307  
5
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SAFETY  
HC-165/185  
Eye Protection  
Eye protection that meets ANSI Z87.1, CE, or CSA Z94.3 requirements must be worn whenever you operate  
the unit.  
Hand Protection  
Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the  
transmission of machine vibration to your hands.  
Breathing Protection  
Wear a facemask to protect against dust.  
Hearing Protection  
ECHO recommends wearing hearing protection whenever unit is used.  
Proper Clothing  
Wear snug fitting, durable clothing;  
• Pants should have long legs, shirts with long sleeves.  
• DO NOT WEAR SHORTS,  
• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become  
entangled in moving parts or surrounding growth.  
Wear sturdy work shoes with nonskid soles;  
• DO NOT WEAR OPEN TOED SHOES,  
• DO NOT OPERATE UNIT BAREFOOTED.  
Wear no-slip, heavy duty work gloves.  
Keep long hair away from engine and air intake. Retain hair with cap or net.  
Hot Humid Weather  
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy  
work for early morning or late afternoon hours when temperatures are cooler.  
The ignition components of this machine generate an electromagnetic field during operation which  
may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with  
pacemakers should consult with their physician and the pacemaker manufacturer before operating  
this machine. In the absence of such information, ECHO does not recommend the use of ECHO  
products by anyone who has a pacemaker.  
6
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HC-165/185  
SAFETY  
Vibration and Cold  
It is believed that a condition called Raynaud’s Phenomenon,  
which affects the fingers of certain individuals, may be brought  
about by exposure to vibration and cold. Exposure to vibration  
and cold may cause tingling and burning sensations, followed  
by loss of color and numbness in the fingers. The following  
precautions are strongly recommended, because the minimum  
exposure, which might trigger the ailment, is unknown.  
• Keep your body warm, especially the head, neck, feet, ankles,  
hands, and wrists.  
• Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and  
also by not smoking.  
• Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held  
power equipment is not required.  
• If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling,  
consult your physician before further exposing yourself to cold and vibration.  
Repetitive Stress Injuries  
It is believed that overusing the muscles and tendons of the  
fingers, hands, arms, and shoulders may cause soreness,  
swelling, numbness, weakness, and extreme pain in those  
areas. Certain repetitive hand activities may put you at a high  
risk for developing a Repetitive Stress Injury (RSI). An extreme  
RSI condition is Carpal Tunnel Syndrome (CTS), which could  
occur when your wrist swells and squeezes a vital nerve that  
runs through the area. Some believe that prolonged exposure to  
vibration may contribute to CTS. CTS can cause severe pain for  
months or even years.  
To reduce the risk of RSI/CTS, do the following:  
• Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist  
position. Also, when grasping, use your whole hand, not just the thumb and index finger.  
• Take periodic breaks to minimize repetition and rest your hands.  
• Reduce the speed and force with which you do the repetitive movement.  
• Do exercise to strengthen the hand and arm muscles.  
• Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in  
the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve  
and muscle damage can be prevented.  
All over head electrical conductors and communications wires can have electricity flow with high  
voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly,  
otherwise serious injury or death may result.  
X7502255307  
7
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
HC-165/185  
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains  
poisonous emissions and can cause serious injury or death.  
Read the Manuals  
• Provide all users of this equipment with the Operator’s Manual and  
Safety Manual for instructions on Safe Operation.  
Clear the Work Area  
• Spectators and fellow workers must be warned, and children and  
animals prevented from coming nearer than 15 m (50 ft.) while the  
unit is in use.  
Keep a Firm Grip  
• Always hold throttle handle and support handle with thumbs and  
fingers tightly encircling the handles.  
Keep a Solid Stance  
• Maintain footing and balance at all times. Do not stand on  
slippery, uneven or unstable surfaces. Do not work in odd  
positions or on ladders. Do not over reach.  
Avoid Hot Surfaces  
For more information  
scan this QR code.  
• Keep exhaust area clear of flammable debris. Avoid contact  
during and immediately after operation.  
Never perform blade maintenance procedures while engine is running.  
Equipment  
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved  
attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,  
attachments or accessories which have not been tested and approved by ECHO. Read and comply  
with all safety instructions listed in this manual and safety manual.  
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.  
• Check that the cutting attachment is firmly attached and in safe operating condition. Dull, loose or  
damaged blades should not be used.  
8
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
SAFETY  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings.  
ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a  
complete stop before removing obstructions, clearing debris, or servicing unit.  
DO NOT start or operate unit unless all guards and protective covers are properly assembled to  
unit.  
NEVER reach into any opening while the engine is running. Moving parts may not be visible  
through openings.  
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or  
leaks are found, do not use unit, otherwise serious personal injury or property damage may occur.  
Have unit repaired by an authorized servicing dealer before using.  
X7502255307  
9
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
EPA 2010 and Later and/or C.A.R.B. TIER III  
HC-165/185  
The emission control system for the engine is EM (engine modification)  
and, if the second to last character of the Engine Family on the Emission  
Control Information label (sample below) is “C”, “K”, or “T”, the emission  
control system is EM and TWC (3-way catalyst). The fuel tank/fuel line  
emission control system is EVAP (evaporative emissions). Evaporative  
emissions for California models are only applicable to fuel tanks.  
An Emission Control Label is located on the engine. (This is an  
EXAMPLE ONLY, information on label varies by engine FAMILY).  
Product Emission Durability (Emission Compliance Period)  
The 50 or 300 hour emission compliance period is the time span  
selected by the manufacturer certifying the engine emissions output  
meets applicable emissions regulations, provided that approved  
maintenance procedures are followed as listed in the Maintenance Section of this manual.  
10  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HC-165/185  
DESCRIPTION  
DESCRIPTION  
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow  
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See  
PARTS ORDERING instructions for specific information.  
2
3
1
9
4
5
6
7
8
17  
10  
15  
16  
14  
11  
12  
13  
Right Front Handle Guard  
Throttle Handle  
Hot Decal (near muffler)  
X7502255307  
11  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DESCRIPTION  
HC-165/185  
1. SUPPORT HANDLE - Comfortable, textured finish provides anti-slip grip. Guard protects hand from the  
blades. Warning decals are located on guard  
2. THROTTLE TRIGGER LOCKOUT - This lever must be depressed before Throttle Trigger can be  
activated.  
3. THROTTLE HANDLE - 5-position handle can be rotated right or left 45 or 90 degrees, and locked into  
position for a secure grip. Handle contains the Stop Switch, Throttle Lockout Lever, Handle Rotation  
Release Button, and Throttle Trigger.  
4. THROTTLE TRIGGER - Controls engine speed and resets Handle Rotation Release Button. Throttle  
Trigger Lockout must be fully depressed before Throttle Trigger will operate. Trigger returns to idle  
position when released. Squeeze trigger gradually for smooth acceleration.  
5. AIR CLEANER - Contains replaceable filter element.  
6. SPARK PLUG - Provides spark to ignite fuel mixture.  
7. BLADE GUARD- Reduces risk of contact with blades and helps guide material into cutters.  
8. BLADES - Double reciprocating blades mounted to a blade support bar. The blades are double sided,  
capable of cutting on either side.  
9. CHOKE - The choke control lever is located on the front of the air cleaner case. Move choke lever to  
"COLD START" (  
) to close the choke for Cold Starting. Move choke lever to "RUN" (  
) position to  
open choke.  
10. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging  
air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return  
line. Pump purge bulb an additional 4 or 5 times.  
11. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST -The muffler  
controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of  
carbon from leaving the muffler. Keep exhaust area clear of flammable debris.  
12. FUEL TANK - Contains fuel and fuel filter.  
13. HANDLE ROTATION RELEASE BUTTON - Push button in to release handle, then rotate handle to  
desired angle. Squeeze and release Throttle Trigger once to reset button and lock handle in new  
position.  
14. STOP SWITCH - "SLIDE SWITCH" mounted on top of the rear handle. Move switch FORWARD to  
RUN, BACK to STOP.  
15. FUEL TANK CAP - Covers and seals fuel tank opening.  
16. RECOIL STARTER HANDLE - Pull handle slowly until recoil starter engages, then quickly and firmly.  
DO NOT pull rope all the way out or allow the handle to snap back, damage to the starter will occur.  
17. BLADE COVER - Used to cover blades during transportation or storage. Remove blade cover before  
using unit.  
12  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HC-165/185  
CONTENTS  
CONTENTS  
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or  
missing parts. Use the contents list to check for missing parts.  
____ 1 - Hedge Clipper Assembly  
____ 1 - Operator’s Manual  
X7722271404 / X772000164  
HC-165/185  
Hedge Clipper  
____ 1 - Emission Control Warranty Statement  
____ 1 - Safety Manual  
Operator’s Manual  
Burn Hazard  
The muffler or catalytic muffler and surrounding cover may become extremely hot.  
Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur.  
The engine exhaust from this product contains chemicals known to the State of California to causecancer.  
birth defects or other reproductive harm.  
____ 1 - Warranty Registration Card  
____ 1 - Blade Cover  
Read rules for safe operation and instructions carefully. ECHO provides an Operator’s Manual  
and  
a
Safety Manual. Both must be read and understood for proper and safe operation.  
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time  
of publication, but are subject to change without notice. Illustrations may include optional equipment and  
accessories, and may not include all standard equipment.  
X7722271404 X772000164  
/
©
4/2011 ECHO Inc.  
X7502255307  
13  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ASSEMBLY  
HC-165/185  
ASSEMBLY  
This model is factory assembled.  
Note: For Normal cutting, Echo strongly recommends the blade guard be installed. In extreme conditions,  
such as commercial cutting or when cutting thick and/or dense branches, efficiency may be increased  
by trimming without the blade guard.  
Parts Required: Blade Guard, Blade Lock Nuts  
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid  
touching blades whenever possible, and always wear gloves to protect hands.  
Follow blade bolt adjustment instructions exactly. Failure to do so could result in damage to blades or  
gearbox.  
Remove Blade Guard  
1. Move stop switch to stop position  
A
2. Disconnect spark plug wire.  
Hedge clipper blades are very sharp. Touching them may  
lead to severe personal injury. Use a socket and extension  
when adjusting blade bolts or blade locknuts in order to  
keep hands at a safe distance from sharp blades.  
3. Remove blade guard locknuts (A).  
4. Remove blade guard  
Note: Assure blade bolts (B) are tightened securely.  
5. Secure blades with new locknuts (A).  
B
Note: Use new locknuts every time blade guard is installed or  
removed.  
14  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HC-165/185  
ASSEMBLY  
A
Install Blade Guard  
1. Move stop switch to stop position  
2. Disconnect spark plug wire.  
Hedge clipper blades are very sharp. Touching them may  
lead to severe personal injury. Use a socket and extension  
when adjusting blade bolts or blade locknuts in order to  
keep hands at a safe distance from sharp blades.  
3. Remove correct number of lock nuts (A) necessary to install  
blade guard. Assure blade bolts (B) are tightened securely.  
B
Blade guard must be installed as close as possible to  
support handle.  
4. Align holes in blade guard with blade bolts, then install blade  
guard.  
5. Secure blade guard with new locknuts (A)  
Note: Use new locknuts every time blade guard is installed or  
removed  
If blade guard is damaged or show signs of wear, replace it.  
X7502255307  
15  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OPERATION  
HC-165/185  
OPERATION  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark  
arrestor to prevent discharge of hot particles from the engine. Metal cutters can can create sparks if  
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or  
regulations regarding fire prevention requirements.  
Fuel  
Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO  
requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels  
may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended  
machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may  
also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.  
Fuel Requirements  
Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may  
contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing  
methanol (wood alcohol) is NOT approved. ECHO brand Power Fuelis 93 octane, ethanol-free fuel  
premixed with ECHO Red Armor® engine oil at 50:1 ratio. Use of ECHO Power Fuelis recommended to  
extend engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.  
Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards  
must be used. Echo brand premium Power Blend XUniversal 2-Stroke Oil meets these standards. Engine  
problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and  
J.A.S.O. FD certified oil, such as Echo premium Power Blend X, will void the two-stroke engine warranty.  
Echo premium Power Blend XUniversal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo  
engines sold in the past regardless of ratio specified in those manuals.  
Handling Fuel  
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal  
injury may result.  
Use an approved fuel container.  
DO NOT smoke near fuel.  
DO NOT allow flames or sparks near fuel.  
16  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HC-165/185  
OPERATION  
Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to  
equalize.  
NEVER refuel a unit when the engine is HOT or RUNNING!  
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.  
DO NOT overfill fuel tank. Wipe up spills immediately.  
Securely tighten fuel tank cap and close fuel container after refueling.  
Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is  
repaired.  
Move at least 3m (10 ft.) from refueling location before starting the engine.  
Mixing Instructions  
1. Fill an approved fuel container with half of the required  
amount of gasoline.  
2. Add the proper amount of 2-stroke oil to gasoline.  
3. Close container and shake to mix oil with gasoline.  
4. Add remaining gasoline, close fuel container, and remix.  
Spilled fuel is a leading cause of hydrocarbon emissions. Some  
states may require the use of automatic fuel shut-off containers  
to reduce fuel spillage.  
For more information  
scan this QR code.  
After use  
• DO NOT store a unit with fuel in its tank. Leaks can occur.  
Return unused fuel to an approved fuel storage container.  
Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area.  
As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building,  
away from sparks and flames.  
Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a  
fuel stabilizer is added.  
Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.  
X7502255307  
17  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
HC-165/185  
Starting Cold Engine  
A
Hedge Clipper blades are very sharp. Touching them may  
lead to severe personal injury. Avoid touching blades  
whenever possible, and always wear gloves to protect  
hands.  
Note: The blade cover is used for transportation and storage.  
Remove blade cover before using the unit.  
1. Stop Switch  
Move stop switch (A) away from the STOP position.  
B
2. Choke  
C
Move choke (B) to Cold Start (  
) (closed) position.  
3. Purge Bulb  
Pump purge bulb (C) until fuel is visible and flows freely in the  
clear fuel tank return line. Pump bulb an additional 4 or 5  
times.  
4. Recoil Starter  
D
Lay the unit on a flat, clear area. Grip the support handle  
securely with one hand, and pull the recoil starter handle (D)  
until engine fires (or 5 pulls maximum).  
5. Choke  
Afterenginefires(or5pulls), movechoke(B)totheRun(  
)
(open) position. Restart engine if necessary and allow unit to  
warm up at idle fo rseveral minutes.  
Note: If engine does not start with choke in “Run” position after  
5 pulls, repeat instructions 2 - 5.  
The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor  
adjustment may be necessary to assure blades do not move at idle. If blades move, readjust  
carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO  
Dealer.  
6. Throttle Trigger  
After engine warm-up, grip thethrottle handle and support handle. Depress the throttle trigger lockout, and  
gradually depress throttle trigger to increase engine RPM to operating speed.  
18  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
OPERATION  
Starting Warm Engine  
The starting procedure is the same as Cold Start except DO  
NOT close the choke.  
A
The blades must not move at idle, otherwise serious  
personal injury may result. Periodic carburetor adjustment  
may be necessary to assure blades do not move at idle. If  
blades move, readjust carburetor according to “Carburetor  
Adjustment” instructions in this manual or see your ECHO  
Dealer.  
1. Stop Switch  
Move stop switch (A) away from the STOP position.  
C
2. Purge Bulb  
Pump purge bulb (C) until fuel is visible and flows freely in the  
clear fuel tank return line. Pump bulb an additional 4 or 5  
times.  
3. Recoil Starter  
D
Place the unit on a flat, clear area. Grip the support handle  
securely with one hand, and pull the recoil starter handle (D)  
until engine starts.  
Note: If engine does not start after 5 pulls, use Cold Start  
Procedure.  
Stopping Engine  
1. Throttle  
A
Release throttle and allow engine to return to idle before  
shutting off engine.  
2. Stop Switch  
Move stop switch (A) to STOP position.  
If engine does not stop when stop switch is moved to STOP  
position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop  
switch before using trimmer again.  
X7502255307  
19  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
OPERATION  
HC-165/185  
Rotating Operation  
HC-165/185 Hedge Clipper throttle handles are adjustable for operator comfort at all angles of operation.  
Stop engine before rotating throttle handle, otherwise serious personal injury may result.  
Changing throttle handle angle may change exhaust  
direction. Use a grip and operating position that blows  
exhaust away from you.  
Rotating Throttle Handle  
D
E
C
1. Move stop switch (A) to STOP position.  
2. Press handle rotation release button (B) to unlock throttle  
handle rotation.  
Note: Throttle trigger must be at idle position in order to press  
the rotation lock button.  
3. Rotate throttle handle (C) right or left to the 45º or 90º detent  
setting. A slight "CLICK" will be heard as the detent is  
engaged.  
20  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
OPERATION  
4. Grip the throttle handle. Press the throttle lockout lever  
down with palm of hand and squeeze throttle trigger (D) to  
reset rotation release button (B), and lock handle in position.  
Note: If the throttle trigger does not operate after rotating  
throttle handle, move throttle handle slightly left and right  
until detent engages and throttle trigger operates  
normally.  
Hedge Trimming  
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause  
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position  
unit so that exhaust is directed away from your face and body.  
Hedge Clipper blades are very sharp. Touching them may  
lead to severe personal injury. Avoid touching blades  
whenever possible, and always wear gloves to protect  
hands.  
1. Always grip support and throttle handles.  
2. Hold trimmer firmly and squeeze throttle trigger to  
accelerate engine.  
3. Tilt trimmer so cutting teeth are angled slightly toward the  
hedge or shrub and proceed to cut.  
Never remove hands from unit when blades are moving.  
For more information  
scan this QR code.  
The engine continues running even when the blades have  
stopped due to an obstruction. If this occurs, stop the  
engine, disconnect ignition cable and remove the  
obstruction  
X7502255307  
21  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MAINTENANCE  
HC-165/185  
MAINTENANCE  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and  
hot surfaces.  
Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance  
will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may  
want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to  
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is  
not listed, see your ECHO Dealer for repairs.  
Skill Levels  
Level 1 = Easy to do. Common tools may be required.  
Level 2 = Moderate difficulty. Some specialized tools may be required.  
ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.  
Maintenance Intervals  
DAILY  
REQ’D  
MAINTENANCE  
PROCEDURE  
OR  
EVERY  
3
COMPONENT/SYSTEM  
SKILL  
YEARLY  
BEFORE REFUEL MONTHS  
USE  
LEVEL  
Air Filter  
Inspect/Clean  
1
1
1
1
1
1
2
2
2
2
1
1
1
I / C *  
I / C  
R *  
Choke Shutter  
Fuel Filter  
Inspect/Clean  
Inspect/Replace  
Inspect/Replace  
Inspect/Replace  
Inspect/Clean/Replace  
Inspect/Clean  
I *  
I *  
I / R *  
R *  
Fuel Cap Gasket  
Fuel System  
I (3) *  
I / C  
I (3) *  
Spark Plug  
I / C / R *  
Cooling System  
Muffler Spark Arrestor  
Cylinder Exhaust Port  
Gear Housing  
Blades  
Inspect/Clean/Replace  
Inspect/Clean/Decarbon  
Grease  
I / C / R *  
I / C  
I (1)  
Inspect/Clean  
I / C (2)  
I / C *  
I *  
Recoil Starter Rope  
Screws/Nuts/Bolts  
Inspect/Clean  
Inspect/Tighten/Replace  
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN  
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine  
the frequency of required maintenance.  
MAINTENANCE PROCEDURE NOTES: (1) Apply POWER BLENDXTM grease every 25 hours of use.  
(2) Inspect blade, and clean and sharpen as needed. Lubricate blades periodically during use.  
(3) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.  
* Replacement is recommended based on the finding of damage or wear during inspection.  
22  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
HC-165/185  
MAINTENANCE  
Air Filter  
Level 1.  
REPOWERTM AIR & FUEL FILTER KIT.  
Parts Required:  
1. Close choke (Cold Start Position [  
]). This prevents dirt from  
entering the carburetor throat when the air filter is removed.  
Brush accumulated dirt from air cleaner area.  
2. Remove air filter cover. Brush dirt from inside cover.  
3. Replace filter if it is damaged, fuel soaked, very dirty, or the  
rubber sealing edges are deformed.  
• Lightly brush debris from filter.  
• Soak heavily soiled filters in water/detergent solution to loosen  
dirt, then brush lightly.  
• Rinse with clean water and allow to dry completely before reuse.  
4. Install air filter in air filter case.  
5. Install air filter cover.  
Fuel Filter  
Level 1.  
REPOWERTM AIR & FUEL FILTER KIT.  
Parts Required:  
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal  
injury may result.  
1. Use a clean rag to remove loose dirt from around fuel cap and  
empty fuel tank.  
2. Use the “fuel line hook” to pull the fuel line and filter from the  
tank.  
3. Remove the filter from the line and install the new filter.  
Note: Federal EPA regulations require all model year 2012 and later  
gasoline powered engines produced for sale in the United  
States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel  
tank. When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA  
can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for  
using an un-certified replacement part  
X7502255307  
23  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MAINTENANCE  
HC-165/185  
Spark Plug  
Level 2.  
REPOWERTM Tune-Up Kit  
Parts Required:  
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada)  
otherwise severe engine damage may occur.  
0.65 mm  
(0.026 in.)  
1. Remove spark plug and check for fouling, worn and rounded  
center electrode.  
2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage  
engine.  
3. Adjust spark plug gap by bending outer electrode.  
4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).  
Cooling System  
Level 2.  
Parts Required: None if you are careful.  
To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.  
This flow of air carries combustion heat away from the engine.  
Overheating and engine seizure can occur when:  
• Air intakes are blocked, preventing cooling air from reaching the cylinder.  
• Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the  
heat from leaving.  
Removal of cooling passage blockages or cleaning of cooling fins is considered “Normal Maintenance.” Any  
failure attributed to lack of maintenance is not warranted.  
1. Remove muffler cover.  
2. Remove starter cover and clean dirt and dust from fins.  
DO NOT use a metal scraper to remove dirt from the cylinder fins.  
3. Assemble components in reverse order.  
24  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HC-165/185  
MAINTENANCE  
Exhaust System  
Spark Arrestor Screen  
Level 2.  
Parts Required: Spark Arrestor Screen, Gasket  
1. Remove muffler cover.  
2. Place piston at Top Dead Center (TDC) to prevent  
carbon/dirt from entering cylinder.  
3. Remove exhaust guide (A), gaskets (B), and screen (C)  
from muffler body.  
4. Clean carbon deposits from muffler components.  
Note: When cleaning carbon deposits, be careful not to  
damage the catalytic element inside muffler.  
C
5. Replace screen if it is cracked, plugged, or has holes  
burned through.  
B
A
6. Assemble components in reverse order.  
Exhaust Port Cleaning  
Level 2.  
E
D
Parts Required: As needed: Heat Shield  
1. Remove spark plug lead from spark plug, and remove  
engine cover.  
2. Place piston at top dead center. Remove muffler (D) and  
heat shield (E).  
3. Use a wood or plastic scraping tool to clean deposits from  
cylinder exhaust port.  
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when  
cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.  
4. Inspect heat shield, and replace if damaged.  
5. Install heat shield and muffler.  
6. Tighten muffler mounting bolts (or nuts) to 60-70 in•lbf  
(70-80 kgf•cm).  
7. Install engine cover and attach spark plug lead.  
8. Start engine, and warm to operating temperature.  
9. Stop engine, and re-tighten mounting bolts (or nuts) to  
specifications.  
X7502255307  
25  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MAINTENANCE  
HC-165/185  
Carburetor Adjustment  
The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor  
adjustment may be necessary to assure blades do not move at idle.  
If blades move, readjust carburetor according to these instructions, or see your ECHO Dealer.  
Engine Break-In  
New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor  
adjustments can be made. During the break-in period your engine performance will increase and exhaust  
emissions will stabilize. Idle speed can be adjusted as required.  
High Altitude Operation  
This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance  
up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission  
compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service  
dealer.  
If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when  
operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.  
Level 2.  
Parts Required: None  
Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations.  
Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.  
1. Before adjusting the carburetor, clean or replace the air filter  
and spark arrestor screen.  
2. Start engine and run for several minutes to reach operating  
temperature.  
3. Check idle speed and reset if necessary. If a tachometer is  
available, idle speed screw (A) should be set to the  
specifications found on “Specifications” page of this  
manual. Turn idle screw (A) clockwise to increase idle  
speed; counter clockwise to decrease idle speed.  
A
When carburetor adjustment is completed, the cutting attachment should not move at idle,  
otherwise serious personal injury may result.  
26  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
Lubrication  
MAINTENANCE  
Blades  
Level 1.  
Parts Required: 20W Engine Oil (blade lubrication), 50-50  
mixture of kerosene and 20W oil (blade  
cleaning)  
Hedge Clipper blades are very sharp. Touching them may  
lead to severe personal injury. Avoid touching blades  
whenever possible, and always wear gloves to protect  
hands.  
1. Move stop switch to stop position.  
2. Disconnect spark plug wire from spark plug.  
3. Brush loose debris from blade and coat both sides of blade  
with the 50-50 cleaning mixture.  
4. Allow cleaning mixture to soften the remaining gummy  
residue then wipe it from the blade..  
5. Apply clean oil to the entire length of the blade. Be certain  
the blade bolts are lubricated.  
6. Wipe excess oil from the blade before putting the unit back  
in service.  
Gear Box  
Level 1.  
POWER BLENDXTM 14 oz. or Lithium Base  
Grease.  
Parts Required:  
X7502255307  
27  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MAINTENANCE  
HC-165/185  
1. Clean dirt from the grease fitting (A).  
2. Apply 1-2 pumps of grease into fitting, DO NOT over fill.  
Leave room for the grease to expand during operation  
3. Wipe excess grease from around grease fitting.  
A
Blades  
Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise  
premature wear or internal damage may occur.  
Sharpening  
Level 2.  
Parts Required: none  
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid  
touching blades whenever possible, and always wear gloves to protect hands.  
1. Move stop switch to stop position.  
2. Disconnect spark plug wire.  
A
3. Remove blade guard, if installed (see “Blade Guard  
6 mm (.25 in.) radius  
Remove/Install instructions”).  
4. Slide blades to allow file clearance using slots (A) on bottom  
of blade. Do not pry against cutting edges.  
5. File each edge carefully. Follow the original shape of the  
blade.  
45o  
If a power grinder is used DO NOT allow blade to over heat.  
6. Install blade guard, if necessary (see “Blade Guard  
Remove/Install instructions”).  
7. Lubricate blades (see “Lubrication”).  
8. Connect spark plug wire.  
28  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
MAINTENANCE  
Adjustment  
Level 2.  
Parts Required: none  
Hedge clipper blades are very sharp. Touching them may  
lead to severe personal injury. Use long hex wrenches and  
sockets with extensions when tightening blade screws and  
blade locknuts to keep hands at a safe distance from sharp  
blades.  
1. Tighten blade screws. (A) securely  
2. Hold blade screws (A) to prevent turning, and tighten  
locknuts (B).  
A
Locking ability of Hedge Clipper blade lock nuts will diminish  
each time they are removed. Replace if turning resistance is not  
felt when installing locknuts.  
B
X7502255307  
29  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
HC-165/185  
TROUBLESHOOTING  
ENGINE PROBLEM TROUBLESHOOTING CHART  
Problem  
Check  
Status  
Cause  
Remedy  
Fuel strainer clogged  
Fuel line clogged  
Carburetor  
Clean or replace  
Clean or replace  
See your Echo dealer  
Fuel at carburetor No fuel at carburetor  
No fuel at cylinder  
Carburetor  
See your Echo dealer  
Open choke  
Fuel at cylinder  
Clean/replace air filter  
Adjust carburetor  
See your Echo dealer  
Muffler wet with fuel  
Fuel Mixture too rich  
Enginecranks-  
starts hard/  
doesn’t start  
Stop switch off  
Electrical problem  
Interlock switch  
Turn switch to ON  
See your Echo dealer  
See your Echo dealer  
Spark at end of  
No spark  
plug wire  
Spark gap incorrect  
Covered with carbon  
Fouled with fuel  
Adjust to .65mm (0.026 in.)  
Clean or replace  
Clean or replace  
Spark at plug  
No spark  
Plug defective  
Replace plug  
Air filter  
Air filter dirty  
Normal wear  
Clean or replace  
Contaminants/residues  
in fuel  
Fuel filter  
Fuel filter dirty  
Replace  
Contaminants/residues  
in fuel  
Engine runs,  
but dies or  
does not  
accelerate  
properly  
Fuel vent  
Fuel vent plugged  
Clean or replace  
Spark Plug  
Carburetor  
Plug dirty/worn  
Normal wear  
Vibration  
Clean and adjust or replace  
Adjust  
Improper adjustment  
Cooling system  
dirty/plugged  
Extended operation in  
dirty/dusty locations  
Cooling System  
Clean  
Spark Arrestor  
Screen  
Spark arrestor screen  
plugged  
Normal wear  
Replace  
Engine does  
not crank  
N/A  
N/A  
Internal engine problem See your Echo dealer  
Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition  
spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may  
result.  
30  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
STORAGE  
STORAGE  
The muffler and surrounding cover become hot during operation. Always keep exhaust area clear of  
flammable debris during transportation or when storing, otherwise serious property damage or  
personal injury may result.  
Long Term Storage (Over 30 Days)  
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective  
storage maintenance which includes the following:  
1. Store unit in a dry, dust free place, out of the reach of children.  
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid  
touching blades whenever possible, and always wear gloves to protect hands.  
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark,  
otherwise serious personal injury may result.  
2. Place the stop switch in the “STOP” position.  
3. Remove accumulation of grease, oil, dirt and debris from exterior of unit.  
4. Perform all periodic lubrication and services that are required.  
5. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.  
6. Install blade cover on blades.  
7. Tighten all the screws and nuts.  
8. Drain fuel tank completely. Press purge bulb 6 -7 times to remove remaining fuel from carburetor then  
drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.  
9. Allow the engine to cool, then emove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke  
engine oil into the cylinder through the spark plug hole.  
a. Place a clean cloth over the spark plug hole.  
b. Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.  
c. Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston  
reaches the top of its travel and leave it there.  
10. Install the spark plug (do not connect ignition cable).  
Always store and transport hedge clippers in a stable, horizontal position. Support gear case and cutting  
blades to prevent excessive flexing, which may cause damage to these components. Always install blade  
cover when transporting or storing unit.  
X7502255307  
31  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SPECIFICATIONS  
HC-165/185  
SPECIFICATIONS  
MODEL  
Length  
HC-165  
HC-185  
1185 mm (45.59 in.)  
1263 mm (49.72 in.)  
Width  
275 mm (10.83 in.)  
203 mm (7.99 in.)  
Height  
Weight (dry)  
Engine Type  
Bore  
5.5 kg (12.13 lb.)  
5.7 kg (12.57 lb.  
Air cooled, two-stroke, single cylinder gasoline engine  
32.2 mm (1.27 in.)  
Stroke  
26.0 mm (1.02 in.)  
Displacement  
Exhaust  
21.2 cc (1.29 cu. in.)  
Spark arrestor muffler or spark arrestor muffler with catalyst  
Diaphragm w/purge pump  
Carburetor  
Ignition System  
Spark Plug  
Fuel  
Flywheel magneto, capacitor discharge ignition type  
NGK BPM-8Y (Gap 0.65 mm (0.026 in.)  
Mixed (Gasoline and Two-stroke Oil)  
50 : 1 Power Blend XTM ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345- FD,  
two-stroke, air-cooled engine oil.  
Fuel/Oil Ratio  
Gasoline  
Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10%  
ethyl alcohol or 15% MTBE. Do not use alternative fuels such as E-15 or E-85.  
Oil  
Power Blend XTM Premium Universal 2-Stroke Oil  
Fuel Tank Capacity  
Starter System  
Clutch  
0.5 lit. (16.9 US fl. oz.)  
Automatic Rrecoil Starter  
Centrifugal Type  
Gear Case Ratio  
Cutter  
5.75:1  
Double Reciprocating Blade, Double Edge  
Length  
From guard to tip  
Effective tooth to tooth  
Pitch  
680 mm (26.77 in.)  
623 mm (24.53 in.)  
785 mm (30.91 in.)  
728 mm (28.66 in.)  
35 mm (1.38 in.)  
Height  
21.0 mm (0.83 in.)  
Maximum Diameter Cut  
Soft Material  
25.4 mm (1 in.)  
13 mm (1/2 in.)  
3,300 RPM  
Woody Material  
Idle Speed  
Clutch Engagement Speed  
Wide Open Throttle Speed (W.O.T.)  
5,100 RPM  
11,250 RPM  
32  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HC-165/185  
WARRANTY STATEMENTS  
WARRANTY STATEMENTS  
ECHO LIMITED WARRANTY STATEMENT FOR  
PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010  
ECHO'S RESPONSIBILITY  
ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.  
Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product  
free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. THIS LIMITED  
WARRANTY IS ONLYAPPLICABLE TO ECHO PRODUCTS SOLD BYAUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL  
PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. Repair  
parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any  
damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty  
become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product.  
Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers  
refer to WWW.ECHO-USA.COM or call 1-800-432-ECHO.  
OWNER’S RESPONSIBILITY  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COMꢀꢁꢂꢀꢃꢄꢀꢅꢆꢆ-  
ꢇꢈꢉꢀꢁꢊꢋꢀꢋꢌꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢂꢍꢉꢇꢐꢋꢂꢏꢋꢇꢁꢈꢀꢑꢏꢂꢒꢀꢐꢊꢓꢓꢆꢇꢍꢒꢀꢎꢇꢋꢌꢀꢄꢁꢊꢂꢀꢊꢈꢇꢋꢔꢀꢕꢍꢉꢇꢐꢋꢍꢂꢇꢈꢉꢀꢄꢁꢊꢂꢀꢓꢂꢁꢒꢊꢑꢋꢀꢑꢁꢈꢅꢂꢖꢐꢀꢄꢁꢊꢂꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢑꢁꢗꢍꢂꢏꢉꢍꢀꢏꢈꢒꢀꢓꢂꢁꢗꢇꢒꢍꢐꢀꢏꢀꢒꢇꢂꢍꢑꢋꢀ  
ꢆꢇꢈꢘꢀꢇꢙꢀꢎꢍꢀꢅꢈꢒꢀꢇꢋꢀꢈꢍꢑꢍꢐꢐꢏꢂꢄꢀꢋꢁꢀꢑꢁꢈꢋꢏꢑꢋꢀꢄꢁꢊꢔ  
The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the  
ꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀꢖꢏꢈꢊꢏꢆꢔꢀꢚꢌꢁꢊꢆꢒꢀꢏꢀꢓꢂꢁꢒꢊꢑꢋꢀꢒꢇꢙꢅꢑꢊꢆꢋꢄꢀꢁꢑꢑꢊꢂꢛꢀꢄꢁꢊꢀꢖꢊꢐꢋꢛꢀꢏꢋꢀꢄꢁꢊꢂꢀꢍꢜꢓꢍꢈꢐꢍꢛꢀꢒꢍꢆꢇꢗꢍꢂꢀꢁꢂꢀꢐꢌꢇꢓꢀꢄꢁꢊꢂꢀ!"#$ꢀꢊꢈꢇꢋꢀꢋꢁꢀꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ!"#$ꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢀ  
dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been  
made. For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO  
servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you  
can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM.  
PRODUCT WARRANTY PERIOD  
RESIDENTIAL APPLICATION  
#ꢀꢀ 5 YEAR WARRANTY - All units for residential, or non-income producing use will be covered by this limited warranty for [ꢀꢁ ꢂꢃꢄꢅꢆꢁꢇꢈꢉ from  
date of purchase.  
EXCEPTIONS:  
#ꢀ 'ꢁꢂꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢍꢈꢉꢇꢈꢍꢀꢓꢁꢎꢍꢂꢍꢒꢀꢓꢂꢁꢒꢊꢑꢋꢐꢛꢀꢋꢌꢍꢀꢍꢆꢍꢑꢋꢂꢁꢈꢇꢑꢀꢇꢉꢈꢇꢋꢇꢁꢈꢀꢖꢁꢒꢊꢆꢍꢛꢀ\ꢍꢜꢇꢃꢆꢍꢀꢒꢂꢇꢗꢍꢀꢑꢏꢃꢆꢍꢐꢛꢀꢚꢕ/ꢀꢐꢁꢆꢇꢒꢀꢒꢂꢇꢗꢍꢀꢐꢌꢏꢙꢋꢐꢛꢀꢏꢈꢒꢀ9"ꢀꢋꢇꢈꢍꢐꢀ  
are warranted for the ꢊꢋꢌꢁꢍ of the product on parts only.  
#ꢀ "ꢊꢋꢋꢇꢈꢉꢀꢏꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢀꢐꢊꢑꢌꢀꢏꢐꢛꢀꢃꢊꢋꢀꢈꢁꢋꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢛꢀꢃꢏꢂꢐꢛꢀꢑꢌꢏꢇꢈꢐꢛꢀꢐꢓꢂꢁꢑꢘꢍꢋꢐꢛꢀꢃꢆꢏꢒꢍꢐꢛꢀꢏꢈꢒꢀꢈꢄꢆꢁꢈꢀꢋꢂꢇꢖꢖꢍꢂꢀꢌꢍꢏꢒꢐꢀꢙꢁꢂꢀꢂꢍꢐꢇꢒꢍꢈꢋꢇꢏꢆꢀꢁꢂꢀꢈꢁꢈ*ꢇꢈꢑꢁꢖꢍꢀ  
producing use will be covered for failures due to defects in material or workmanship for a period of ꢎꢏꢅꢐꢇꢆꢉ from original product  
purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.  
#ꢀꢀ !"#$ꢝꢐꢀꢕꢏꢓꢇꢒꢀ:ꢁꢏꢒꢍꢂꢀꢚꢋꢂꢇꢈꢉꢀ#ꢍꢏꢒꢀꢑꢏꢂꢂꢇꢍꢐꢀꢏꢀꢆꢇꢙꢍꢋꢇꢖꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢈꢀꢋꢌꢍꢀꢆꢇꢈꢍꢀꢆꢁꢑꢘꢇꢈꢉꢀꢐꢄꢐꢋꢍꢖꢛꢀꢓꢏꢂꢋꢐꢀꢁꢈꢆꢄ;ꢀꢈꢁꢀꢆꢏꢃꢁꢂꢔꢀꢕꢍꢙꢍꢂꢀꢋꢁꢀꢄꢁꢊꢂꢀꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀ  
manual for string head installation and maintenance instructions.  
#ꢀꢀ <ꢆꢆ=*ꢚꢍꢂꢇꢍꢐꢈꢒ>ꢕ$ꢀ<99<"#/!?9!ꢕ@!ꢚꢓꢆꢇꢋꢌꢏꢙꢋꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢏꢂꢂꢄꢌꢍꢏꢖꢍꢏꢂꢂꢏꢈꢋꢄꢊꢂꢏꢋꢇꢁꢈꢌꢍꢈꢇꢋꢐꢌꢍꢄꢂꢍꢀ  
ꢒꢍꢐꢇꢉꢈꢍꢒꢀꢋꢁꢀꢅꢋꢔ  
COMMERCIAL APPLICATION  
#ꢀꢀ 1 YEAR WARRANTY - All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income  
producing use will be covered by this limited warranty for one ꢂꢑꢄꢅꢆꢁꢇꢈ from the date of purchase.  
#ꢀꢀ 2 YEAR WARRANTY - All other units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this  
limited warranty for two ꢂꢒꢄꢅꢆꢁꢇꢈꢉ from the date of purchase.  
EXCEPTIONS:  
#ꢀ 'ꢁꢂꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢍꢈꢉꢇꢈꢍꢀꢓꢁꢎꢍꢂꢍꢒꢀꢓꢂꢁꢒꢊꢑꢋꢐꢛꢀꢋꢌꢍꢀꢍꢆꢍꢑꢋꢂꢁꢈꢇꢑꢀꢇꢉꢈꢇꢋꢇꢁꢈꢀꢖꢁꢒꢊꢆꢍꢛꢀ\ꢍꢜꢇꢃꢆꢍꢀꢒꢂꢇꢗꢍꢀꢑꢏꢃꢆꢍꢐꢛꢀꢚꢕ/ꢀꢐꢁꢆꢇꢒꢀꢒꢂꢇꢗꢍꢀꢐꢌꢏꢙꢋꢐꢀꢏꢈꢒꢀ9"ꢀꢋꢇꢈꢍꢐꢛꢀ  
are warranted for the ꢊꢋꢌꢁꢍ of the product on parts only.  
#ꢀ "ꢊꢋꢋꢇꢈꢉꢀꢏꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢀꢐꢊꢑꢌꢀꢏꢐꢛꢀꢃꢊꢋꢀꢈꢁꢋꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢛꢀꢃꢏꢂꢐꢛꢀꢑꢌꢏꢇꢈꢐꢛꢀꢐꢓꢂꢁꢑꢘꢍꢋꢐꢛꢀꢃꢆꢏꢒꢍꢐꢛꢀꢏꢈꢒꢀꢈꢄꢆꢁꢈꢀꢋꢂꢇꢖꢖꢍꢂꢀꢌꢍꢏꢒꢐꢀꢙꢁꢂꢀꢑꢁꢖꢖꢍꢂꢑꢇꢏꢆꢛꢀꢇꢈꢐꢋꢇꢋꢊꢋꢇꢁꢈꢏꢆꢛꢀ  
agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period  
of ꢓꢏꢅꢐꢇꢆꢉ from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by  
this warranty.  
#ꢀꢀ !"#$ꢝꢐꢀꢕꢏꢓꢇꢒꢀ:ꢁꢏꢒꢍꢂꢀꢚꢋꢂꢇꢈꢉꢀ#ꢍꢏꢒꢀꢑꢏꢂꢂꢇꢍꢐꢀꢏꢀꢆꢇꢙꢍꢋꢇꢖꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢈꢀꢋꢌꢍꢀꢆꢇꢈꢍꢀꢆꢁꢑꢘꢇꢈꢉꢀꢐꢄꢐꢋꢍꢖꢛꢀꢓꢏꢂꢋꢐꢀꢁꢈꢆꢄ;ꢀꢈꢁꢀꢆꢏꢃꢁꢂꢔꢀꢕꢍꢙꢍꢂꢀꢋꢁꢀꢄꢁꢊꢂꢀꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀ  
manual for string head installation and maintenance instructions.  
#ꢀꢀ <ꢆꢆ=*ꢚꢍꢂꢇꢍꢐꢈꢒ>ꢕ$ꢀ<99<"#/!?9!ꢕ@!ꢚꢓꢆꢇꢋꢌꢏꢙꢋꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢏꢂꢂꢄꢌꢍꢏꢖꢍꢏꢂꢂꢏꢈꢋꢄꢊꢂꢏꢋꢇꢁꢈꢌꢍꢈꢇꢋꢐꢌꢍꢄꢂꢍꢀ  
ꢒꢍꢐꢇꢉꢈꢍꢒꢀꢋꢁꢀꢅꢋꢔ  
RENTAL APPLICATION - 90 DAYS WARRANTY  
#ꢀꢀBꢈꢇꢋꢐꢀꢙꢁꢂꢀꢂꢍꢈꢋꢏꢆꢀꢊꢐꢍꢀꢎꢇꢆꢆꢀꢃꢍꢀꢑꢁꢗꢍꢂꢍꢒꢀꢏꢉꢏꢇꢈꢐꢋꢀꢒꢍꢙꢍꢑꢋꢐꢀꢇꢈꢀꢖꢏꢋꢍꢂꢇꢏꢆꢀꢏꢈꢒꢀꢎꢁꢂꢘꢖꢏꢈꢐꢌꢇꢓꢀꢙꢁꢂꢀꢏꢀꢓꢍꢂꢇꢁꢒꢀꢁꢙꢀGJꢀꢒꢏꢄꢐꢀꢙꢂꢁꢖꢀꢋꢌꢍꢀꢒꢏꢋꢍꢀꢁꢙꢀꢓꢊꢂꢑꢌꢏꢐꢍꢔꢀ  
ꢀꢀ !"#$ꢝꢐꢀꢆꢇꢏꢃꢇꢆꢇꢋꢄꢀꢊꢈꢒꢍꢂꢀꢋꢌꢍꢀO:ꢇꢙꢍꢋꢇꢖꢍPꢀꢑꢁꢗꢍꢂꢏꢉꢍꢀꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢀꢙꢊꢂꢈꢇꢐꢌꢇꢈꢉꢀꢓꢏꢂꢋꢐꢀꢐꢓꢍꢑꢇꢅꢍꢒꢀꢊꢈꢒꢍꢂꢀꢋꢌꢍꢀ>ꢕ$XB"9ꢀY<ꢕꢕ<?9Zꢀ>!ꢕ@$X section of  
this warranty statement for OꢔꢋꢌꢁPꢀꢙꢂꢍꢍꢀꢁꢙꢀꢑꢌꢏꢂꢉꢍꢀꢙꢁꢂꢀꢏꢀꢓꢍꢂꢇꢁꢒꢀꢁꢙꢀꢋꢍꢈꢀ[\J]ꢀꢄꢍꢏꢂꢐꢀꢏꢙꢋꢍꢂꢀꢋꢌꢍꢀꢒꢏꢋꢍꢀꢁꢙꢀꢋꢌꢍꢀꢑꢁꢖꢓꢆꢍꢋꢍꢀꢊꢈꢇꢋꢝꢐꢀꢅꢈꢏꢆꢀꢓꢂꢁꢒꢊꢑꢋꢇꢁꢈꢔꢀ  
X7502255307  
33  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WARRANTY STATEMENTS  
HC-165/185  
PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES  
#ꢀꢀGJ*ꢒꢏꢄꢀꢂꢍꢐꢇꢒꢍꢈꢋꢇꢏꢆꢛꢀꢁꢂꢀꢈꢁꢈ*ꢇꢈꢑꢁꢖꢍꢀꢓꢂꢁꢒꢊꢑꢇꢈꢉꢀꢎꢏꢂꢂꢏꢈꢋꢄ  
#ꢀꢀ^J*ꢒꢏꢄꢀꢑꢁꢖꢖꢍꢂꢑꢇꢏꢆꢛꢀꢇꢈꢐꢋꢇꢋꢊꢋꢇꢁꢈꢏꢆꢛꢀꢏꢉꢂꢇꢑꢊꢆꢋꢊꢂꢏꢆꢛꢀꢇꢈꢒꢊꢐꢋꢂꢇꢏꢆꢛꢀꢇꢈꢑꢁꢖꢍꢀꢓꢂꢁꢒꢊꢑꢇꢈꢉꢛꢀꢁꢂꢀꢂꢍꢈꢋꢏꢆꢀꢏꢓꢓꢆꢇꢑꢏꢋꢇꢁꢈꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢀ  
ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS  
This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior  
performance. To help ensure the performance of the unit, it is required to use two-stroke oil which meets the ISO-L-EGD Standard per ISO/CD  
13738 and JASO M345FD Standards. ꢕꢖꢗꢘꢅꢙꢚ!ꢁꢈꢅ"ꢊꢁ#ꢐ(ꢅ%!ꢚ&()ꢈꢚ*ꢁꢅꢘꢋꢊ ꢇꢐꢀꢏꢀꢓꢂꢍꢖꢇꢊꢖꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢁꢇꢆꢀꢐꢓꢍꢑꢇꢅꢑꢏꢆꢆꢄꢀꢙꢁꢂꢖꢊꢆꢏꢋꢍꢒꢀꢋꢁꢀꢖꢍꢍꢋꢀ@ꢚ$*  
L-EGD (ISO/CD 13738) and JASO M345FD Standards. The use of two-stroke oils designed for other applications, such as for outboard motors  
or lawnmowers can result in severe engine damage, and will void your two-stroke engine limited warranty.  
THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:  
#ꢀ  
:ꢏꢑꢘꢀꢁꢙꢀꢆꢊꢃꢂꢇꢑꢏꢋꢇꢁꢈꢀꢁꢂꢀꢍꢈꢉꢇꢈꢍꢀꢙꢏꢇꢆꢊꢂꢍꢛꢀꢒꢊꢍꢀꢋꢁꢀꢋꢌꢍꢀꢊꢐꢍꢀꢁꢙꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢁꢇꢆꢐꢀthat do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345FD  
Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD compliant and JASO M345FD registered  
oil, will void the two-stroke engine limited warranty. !"#$>ꢁꢎꢍꢂ=ꢆꢍꢈꢒ(9ꢎꢁ*ꢚꢋꢂꢁꢘꢍ$ꢇꢆ meets the ISO-L-EGD and JASO M345FD  
Standard. Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two-stroke oil used, per  
the statement listed in the EPA or California Emission Defect Warranty Explanation.  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢊꢐꢍꢀꢁꢙꢀꢉꢏꢐꢁꢌꢁꢆꢛꢀꢑꢁꢈꢋꢏꢇꢈꢇꢈꢉꢀꢖꢍꢋꢌꢏꢈꢁꢆꢀ[ꢎꢁꢁꢒꢀꢏꢆꢑꢁꢌꢁꢆ]ꢛꢀꢁꢂꢀꢉꢏꢐꢁꢆꢇꢈꢍꢀꢑꢁꢈꢋꢏꢇꢈꢇꢈꢉꢀꢆꢍꢐꢐꢀꢋꢌꢏꢈꢀ|Gꢀꢁꢑꢋꢏꢈꢍ. Only use gasoline which  
contains |Gꢀꢁꢑꢋꢏꢈꢍꢀꢁꢂꢀꢌꢇꢉꢌꢍꢂ. Gasohol which contains a +ꢇ6ꢋ+7+\J}ꢀꢍꢋꢌꢏꢈꢁꢆꢀ[ꢉꢂꢏꢇꢈꢀꢏꢆꢑꢁꢌꢁꢆ]ꢀꢁꢂꢀ\~}ꢀ/9=!ꢀ[ꢖꢍꢋꢌꢄꢆꢋꢍꢂꢋꢇꢏꢂꢄꢃꢊꢋꢄꢆꢍꢋꢌꢍꢂ]ꢀ  
is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual.  
!ꢈꢉꢇꢈꢍꢀꢒꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢊꢐꢍꢀꢁꢙꢀꢍꢋꢌꢍꢂꢀꢁꢂꢀꢏꢈꢄꢀꢐꢋꢏꢂꢋꢇꢈꢉꢀ\ꢊꢇꢒꢐꢔꢀꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢋꢏꢖꢓꢍꢂꢇꢈꢉꢀꢎꢇꢋꢌꢀꢍꢈꢉꢇꢈꢍꢀꢐꢓꢍꢍꢒꢀꢉꢁꢗꢍꢂꢈꢁꢂꢀꢁꢂꢀꢍꢖꢇꢐꢐꢇꢁꢈꢀꢑꢁꢖꢓꢁꢈꢍꢈꢋꢐꢛꢀꢁꢂꢀꢂꢊꢈꢈꢇꢈꢉꢀꢍꢈꢉꢇꢈꢍꢐꢀꢏꢃꢁꢗꢍꢀꢐꢓꢍꢑꢇꢅꢍꢒꢀꢏꢈꢒꢀꢂꢍꢑꢁꢖꢖꢍꢈꢒꢍꢒꢀ  
engine speeds as listed in your operator’s manual.  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
$ꢓꢍꢂꢏꢋꢇꢁꢈꢀꢁꢙꢀꢋꢌꢍꢀꢊꢈꢇꢋꢀꢎꢇꢋꢌꢀꢇꢖꢓꢂꢁꢓꢍꢂꢆꢄꢀꢖꢏꢇꢈꢋꢏꢇꢈꢍꢒꢂꢍꢖꢁꢗꢍꢒꢀꢑꢊꢋꢋꢇꢈꢉꢀꢐꢌꢇꢍꢆꢒꢀꢁꢂꢀꢂꢍꢖꢁꢗꢍꢒꢒꢏꢖꢏꢉꢍꢒꢀꢏꢇꢂꢀꢅꢆꢋꢍꢂꢔꢀꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢒꢇꢂꢋꢛꢀꢓꢂꢍꢐꢐꢊꢂꢍꢀꢁꢂꢀꢐꢋꢍꢏꢖꢀꢑꢆꢍꢏꢈꢇꢈꢉꢀꢋꢌꢍꢀꢊꢈꢇꢋꢛꢀꢐꢏꢆꢋꢀꢎꢏꢋꢍꢂꢛꢀꢑꢁꢂꢂꢁꢐꢇꢁꢈꢛꢀꢂꢊꢐꢋꢛꢀꢗꢏꢂꢈꢇꢐꢌꢛꢀꢏꢃꢂꢏꢐꢇꢗꢍꢐꢛꢀꢏꢈꢒꢀꢖꢁꢇꢐꢋꢊꢂꢍꢔ  
Xꢍꢙꢍꢑꢋꢐꢛꢀꢖꢏꢆꢙꢊꢈꢑꢋꢇꢁꢈꢐꢀꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢐꢀꢂꢍꢐꢊꢆꢋꢇꢈꢉꢀꢙꢂꢁꢖꢀꢏꢃꢊꢐꢍꢛꢀꢖꢇꢐꢊꢐꢍꢛꢀꢈꢍꢉꢆꢍꢑꢋꢛꢀꢖꢁꢒꢇꢅꢑꢏꢋꢇꢁꢈꢐꢛꢀꢏꢆꢋꢍꢂꢏꢋꢇꢁꢈꢐꢛꢀꢈꢁꢂꢖꢏꢆꢀꢎꢍꢏꢂꢛꢀꢇꢖꢓꢂꢁꢓꢍꢂꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢛꢀꢁꢂꢀꢊꢐꢍꢀ  
of unauthorized attachments.  
#ꢀ  
#ꢀ  
@ꢈꢑꢁꢂꢂꢍꢑꢋꢀꢐꢋꢁꢂꢏꢉꢍꢀꢓꢂꢁꢑꢍꢒꢊꢂꢍꢐꢛꢀꢐꢋꢏꢆꢍꢀꢙꢊꢍꢆꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢙꢏꢇꢆꢊꢂꢍꢀꢋꢁꢀꢓꢂꢁꢗꢇꢒꢍꢀꢁꢂꢀꢓꢍꢂꢙꢁꢂꢖꢀꢂꢍ€ꢊꢇꢂꢍꢒꢀꢖꢏꢇꢈꢋꢍꢈꢏꢈꢑꢍꢀꢐꢍꢂꢗꢇꢑꢍꢐꢀꢏꢐꢀꢓꢂꢍꢐꢑꢂꢇꢃꢍꢒꢀꢇꢈꢀꢋꢌꢍꢀꢁꢓꢍꢂꢏꢋꢁꢂꢐꢀ  
manual. Preventative maintenance as outlined in the operators manual is the customer’s responsibility.  
'ꢏꢇꢆꢊꢂꢍꢐꢀꢒꢊꢍꢀꢋꢁꢀꢇꢖꢓꢂꢁꢓꢍꢂꢀꢐꢍꢋ*ꢊꢓꢛꢀꢓꢂꢍ*ꢒꢍꢆꢇꢗꢍꢂꢄꢀꢐꢍꢂꢗꢇꢑꢍꢀꢁꢂꢀꢂꢍꢓꢏꢇꢂꢀꢐꢍꢂꢗꢇꢑꢍꢀꢃꢄꢀꢏꢈꢄꢁꢈꢍꢀꢁꢋꢌꢍꢂꢀꢋꢌꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ!"#$ꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢀꢒꢍꢏꢆꢍꢂꢀꢒꢊꢂꢇꢈꢉꢀꢋꢌꢍꢀ  
warranty period.  
"ꢍꢂꢋꢏꢇꢈꢀparts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.  
Bꢐꢍꢓꢏꢂꢘꢆꢊꢉꢐꢋꢌꢍꢂꢌꢏꢈꢌꢁꢐꢍꢍꢍꢋꢇꢈꢉꢍꢂꢙꢁꢂꢖꢏꢈꢑꢍꢈꢒꢊꢂꢏꢃꢇꢆꢇꢋꢄꢍ€ꢊꢇꢂꢍꢖꢍꢈꢋꢐꢌꢍ$!/ꢓꢏꢂꢘꢆꢊꢉꢇꢐꢋꢍꢒꢌꢍ$ꢓꢍꢂꢏꢋꢁꢂꢐꢀ  
Manuals.  
$ꢗꢍꢂꢌꢍꢏꢋꢇꢈꢉꢀꢁꢂꢀꢑꢏꢂꢃꢁꢈꢀꢐꢑꢁꢂꢇꢈꢉꢀꢙꢏꢇꢆꢊꢂꢍꢐꢀꢒꢊꢍꢀꢋꢁꢀꢂꢍꢐꢋꢂꢇꢑꢋꢍꢒꢛꢀꢑꢆꢁꢉꢉꢍꢒꢀꢍꢜꢌꢏꢊꢐꢋꢀꢓꢁꢂꢋꢀꢁꢂꢀꢑꢁꢖꢃꢊꢐꢋꢇꢁꢈꢀꢑꢌꢏꢖꢃꢍꢂꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢒꢏꢖꢏꢉꢍꢀꢋꢁꢀꢐꢓꢏꢂꢘꢀꢏꢂꢂꢍꢐꢋꢍꢂꢀ  
screen.  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
<ꢒƒꢊꢐꢋꢖꢍꢈꢋꢐꢀꢏꢙꢋꢍꢂꢀꢋꢌꢍꢀꢅꢂꢐꢋꢀ[^J]ꢀꢋꢌꢇꢂꢋꢄꢀꢒꢏꢄꢐꢀꢏꢈꢒꢀꢃꢍꢄꢁꢈꢒꢛꢀꢐꢊꢑꢌꢀꢏꢐꢀꢑꢏꢂꢃꢊꢂꢍꢋꢁꢂꢀꢏꢒƒꢊꢐꢋꢖꢍꢈꢋꢀꢏꢈꢒꢀꢋꢌꢂꢁꢋꢋꢆꢍꢀꢑꢏꢃꢆꢍꢀꢏꢒƒꢊꢐꢋꢖꢍꢈꢋꢔꢀ  
Xꢏꢖꢏꢉꢍꢀꢋꢁꢀꢉꢍꢏꢂꢐꢀꢁꢂꢀꢉꢍꢏꢂꢀꢑꢏꢐꢍꢐꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢑꢁꢈꢋꢏꢖꢇꢈꢏꢋꢍꢒꢀꢉꢂꢍꢏꢐꢍꢀꢁꢂꢀꢁꢇꢆꢛꢀꢊꢐꢍꢀꢁꢙꢀꢇꢈꢑꢁꢂꢂꢍꢑꢋꢀꢋꢄꢓꢍꢀꢁꢂꢀꢗꢇꢐꢑꢁꢐꢇꢋꢄꢀꢁꢙꢀꢆꢊꢃꢂꢇꢑꢏꢈꢋꢐꢛꢀꢏꢈꢒꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢀꢋꢁꢀꢑꢁꢖꢓꢆꢄꢀ  
with recommended grease or oil change intervals.  
#ꢀ  
#ꢀ  
#ꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢆꢁꢏꢒꢇꢈꢉꢀꢚ#ꢕ!Xꢀ?ꢀ„<"® beyond recommended capacity.  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢓꢊꢖꢓꢀꢁꢂꢀꢐꢓꢂꢏꢄꢍꢂꢀꢂꢊꢈꢈꢇꢈꢉꢀꢒꢂꢄꢛꢀꢓꢊꢖꢓꢇꢈꢉꢀꢁꢂꢀꢐꢓꢂꢏꢄꢇꢈꢉꢀꢑꢏꢊꢐꢋꢇꢑꢀꢁꢂꢀ\ꢏꢖꢖꢏꢃꢆꢍꢀꢖꢏꢋꢍꢂꢇꢏꢆꢐꢛꢀꢁꢂꢀꢆꢏꢑꢘꢀꢁꢙꢀꢁꢂꢀꢃꢂꢁꢘꢍꢈꢀꢐꢋꢂꢏꢇꢈꢍꢂꢐꢔꢀ  
<ꢒꢒꢇꢋꢇꢁꢈꢏꢆꢀꢒꢏꢖꢏꢉꢍꢀꢋꢁꢀꢓꢏꢂꢋꢐꢀꢁꢂꢀꢑꢁꢖꢓꢁꢈꢍꢈꢋꢐꢀꢒꢊꢍꢀꢋꢁꢀꢑꢁꢈꢋꢇꢈꢊꢍꢒꢀꢊꢐꢍꢀꢏꢙꢋꢍꢂꢀꢁꢓꢍꢂꢏꢋꢇꢁꢈꢏꢆꢀꢓꢂꢁꢃꢆꢍꢖꢀꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢀꢁꢑꢑꢊꢂꢐꢔꢀꢚꢌꢁꢊꢆꢒꢀꢁꢓꢍꢂꢏꢋꢇꢁꢈꢏꢆꢀꢓꢂꢁꢃꢆꢍꢖꢀꢁꢂꢀ  
failure occur, the product should not be used, but delivered as is to an authorized ECHO servicing dealer.  
It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting  
WWW.ECHO-USA.COMꢔꢀZꢁꢊꢂꢀꢂꢍꢑꢍꢇꢓꢋꢀꢁꢙꢀꢓꢊꢂꢑꢌꢏꢐꢍꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢒꢏꢋꢍꢛꢀꢖꢁꢒꢍꢆꢀꢏꢈꢒꢀꢐꢍꢂꢇꢏꢆꢀꢈꢊꢖꢃꢍꢂꢀꢖꢊꢐꢋꢀꢃꢍꢀꢖꢏꢇꢈꢋꢏꢇꢈꢍꢒꢀꢏꢈꢒꢀꢓꢂꢍꢐꢍꢈꢋꢍꢒꢀꢋꢁꢀꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ  
ECHO servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states do not allow limitations on how long  
an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or  
ꢑꢁꢈꢐꢍ€ꢊꢍꢈꢋꢇꢏꢆꢀꢒꢏꢖꢏꢉꢍꢐꢛꢀꢐꢁꢀꢄꢁꢊꢀꢖꢏꢄꢀꢏꢆꢐꢁꢀꢌꢏꢗꢍꢀꢁꢋꢌꢍꢂꢀꢐꢓꢍꢑꢇꢅꢑꢀꢆꢍꢉꢏꢆꢀꢂꢇꢉꢌꢋꢐꢀꢎꢌꢇꢑꢌꢀꢗꢏꢂꢄꢀꢙꢂꢁꢖꢀꢐꢋꢏꢋꢍꢀꢋꢁꢀꢐꢋꢏꢋꢍꢔꢀ9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢇꢐꢀꢉꢇꢗꢍꢈꢀꢃꢄꢀ!"#$ꢀ  
Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.  
DISCLAIMER OF IMPLIED WARRANTIES  
9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢇꢐꢀꢇꢈꢀꢆꢇꢍꢊꢀꢁꢙꢀꢏꢆꢆꢀꢁꢋꢌꢍꢂꢀꢍꢜꢓꢂꢍꢐꢐꢍꢒꢀꢁꢂꢀꢇꢖꢓꢆꢇꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢇꢍꢐꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢏꢈꢄꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢙꢀ'@9?!ꢚꢚꢀ'$ꢕꢀ<ꢀ><ꢕ9@"B:<ꢕꢀ>Bꢕ>$ꢚ!ꢀ  
OR USE and any implied warranty of MERCHANTABILITYꢀꢁꢋꢌꢍꢂꢎꢇꢐꢍꢀꢏꢓꢓꢆꢇꢑꢏꢃꢆꢍꢀꢋꢁꢀꢋꢌꢇꢐꢀꢓꢂꢁꢒꢊꢑꢋꢔꢀ!"#$ꢀꢏꢈꢒꢀꢇꢋꢐꢀꢏꢙꢅꢆꢇꢏꢋꢍꢒꢀꢑꢁꢖꢓꢏꢈꢇꢍꢐꢀꢐꢌꢏꢆꢆꢀꢈꢁꢋꢀꢃꢍꢀ  
ꢆꢇꢏꢃꢆꢍꢀꢙꢁꢂꢀꢏꢈꢄꢀꢐꢓꢍꢑꢇꢏꢆꢀꢇꢈꢑꢇꢒꢍꢈꢋꢏꢆꢀꢁꢂꢀꢑꢁꢈꢐꢍ€ꢊꢍꢈꢋꢇꢏꢆꢀꢒꢏꢖꢏꢉꢍꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢆꢁꢐꢋꢀꢓꢂꢁꢅꢋꢐꢔꢀ9ꢌꢍꢂꢍꢀꢏꢂꢍꢀꢈꢁꢀꢎꢏꢂꢂꢏꢈꢋꢇꢍꢐꢀꢍꢜꢋꢍꢈꢒꢍꢒꢀꢁꢋꢌꢍꢂꢀꢋꢌꢏꢈꢀꢏꢐꢀꢓꢂꢁꢗꢇꢒꢍꢒꢀꢌꢍꢂꢍꢇꢈꢔꢀ  
9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢖꢏꢄꢀꢃꢍꢀꢖꢁꢒꢇꢅꢍꢒꢀꢁꢈꢆꢄꢀꢃꢄꢀ!"#$ꢔ  
99922201032  
11/18/2011  
34  
X7502255307  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HC-165/185  
NOTES  
NOTES  
X7502255307  
35  
© 9/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
(165) S69411001001/S69411999999  
S76612001001/S76612999999  
(185) S69511001001/S69511999999  
S76812001001/S76812999999  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Earlex Paint Sprayer L0553 User Manual
Extron electronic Stereo Receiver DVI DL 201 Rx User Manual
FieldServer Computer Drive FS 8700 36 User Manual
Fisher Price Baby Toy W9510 User Manual
Fusion Automobile Alarm CE 99200 User Manual
Garland Range U48 2G36LL User Manual
Gemini Turntable XL 1800Q IV User Manual
GE Monogram Range ZDP364LDPSS User Manual
Gitzo Camcorder Accessories GT 531 User Manual
Globalsat Technology GPS Receiver BT 359 User Manual