ELAN Home Systems Satellite Radio DT22 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Read Information—All the safety and operating information should be read before the appliance is operated.  
Follow Information—All operating and use information should be followed.  
Retain Information—The safety and operating information should be retained for future reference.  
Heed Warnings—All warnings on the appliance and in the operating instructions should be heeded.  
Wall Mounting—Mounting of this appliance should be done only by an authorized installer.  
Ventilation—The appliances should be situated so that their location or position does not interfere with their proper  
ventilation. These appliances should never be placed near or over a radiator or heat register.  
-These appliances should not be placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the  
ventilation openings.  
Non-Use Periods—Appliances that are left unattended and unused for long periods of time should be de-energized.  
Grounding or Polarization—Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one blade wider than the other blade. A grounding type plug has two blades and a third  
grounding prong. The polarized wide blade and the third prong are provided for your safety. If the provided plug does  
not fit your outlet, consult an electrician for replacement of the obsolete outlet.  
Power Cord Protection—Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles and the point where they exit from the apparatus.  
Water—Do not use the apparatus near water.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Cleaning—Unplug the apparatus from the power outlet before cleaning. Use only a dry cloth to clean the apparatus.  
Power Lines—An outdoor antenna should be located away from power lines. When installing an outside antenna.  
system, extreme care should be taken to avoid touching power lines or circuits, as contact with them may be fatal.  
Object and Liquid Entry—Never insert objects of any kind through the openings of these appliances, as they may  
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Care should be taken so  
that objects do not fall and liquids are not spilled into the appliance through openings in the enclosure.  
Servicing—Do not attempt to service these appliances yourself, as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
Damage Requiring Service—These appliances should be serviced by qualified service personnel when:  
• A power supply connection or a plug has been damaged or  
• If liquid has been spilled into the appliance or objects have fallen into the appliance or  
• The appliance has been exposed to water or moisture or  
• The appliance does not appear to operate normally or exhibits a marked change in performance or  
• The appliance has been dropped or the enclosure damaged.  
Replacement Parts—When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other hazards. The Master Control Unit battery should be replaced only after  
turning the power off and only by an authorized installer.  
Safety Check—Upon completion of any service or repairs to this audio product, ask the service technician to perform  
safety checks to determine that the audio product is in proper operating condition.  
Lightning Storms—Unplug this apparatus during lightning storms or when unused for long periods of time.  
Attachments and Accessories—Use only attachments/accessories specified by the manufacturer.  
Cart, Stand, Tripod, Bracket or Table—Use only with a cart, stand, tripod, bracket or table specified  
by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip over.  
Disconnect Device—Where the mains plug or an appliance coupler is used as the disconnect  
device, the disconnect device shall remain operable.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
CAUTION:  
Changes or modifications not expressly approved by Elan Home Systems could void the user’s authority  
to operate the equipment.  
Page 4  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Table of Contents  
Intro .......................................................................................................................................................................................... 8  
Highlights................................................................................................................................................................... 10  
Items in package........................................................................................................................................................ 10  
Front Panel (Hard Buttons)........................................................................................................................................ 11  
Front Panel LCD......................................................................................................................................................... 12  
Rear Panel ................................................................................................................................................................. 13  
Rack Mounting........................................................................................................................................................... 14  
Connections.......................................................................................................................................................................... 15  
IR............................................................................................................................................................................... 15  
RS-232....................................................................................................................................................................... 15  
VIA!NET ..................................................................................................................................................................... 16  
Ethernet ..................................................................................................................................................................... 17  
RCA Audio ................................................................................................................................................................. 18  
OPTICAL Audio.......................................................................................................................................................... 18  
AM Loop Antenna...................................................................................................................................................... 19  
FM Antenna................................................................................................................................................................ 19  
Rear Panel Power Switch........................................................................................................................................... 22  
Operation............................................................................................................................................................................... 22  
Front Panel................................................................................................................................................................. 23  
Mode Menu................................................................................................................................................................ 24  
AM/FM ....................................................................................................................................................... 24  
Preset/Direct.............................................................................................................................................. 24  
Stereo/Mono.............................................................................................................................................. 25  
Saving Presets........................................................................................................................... 26  
Deleting Presets......................................................................................................................... 26  
Override ..................................................................................................................................................... 27  
Change Custom Text.................................................................................................................. 27  
Remove Custom Text................................................................................................................. 29  
Changing Genre ......................................................................................................................... 30  
Removing Genre Override.......................................................................................................... 31  
Details........................................................................................................................................................ 32  
System Configuration ................................................................................................................................................ 33  
Unit ID ....................................................................................................................................................... 33  
LCD Settings.............................................................................................................................................. 34  
© ELAN Home Systems 2009 • All rights reserved.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
LCD Timeout.............................................................................................................................. 35  
LCD Contrast ............................................................................................................................. 36  
LCD Brightness.......................................................................................................................... 37  
Front Panel IR............................................................................................................................................ 38  
RS232........................................................................................................................................................ 39  
Baud Rate .................................................................................................................................. 39  
Unsolicited Feedback ................................................................................................................. 40  
Ethernet ..................................................................................................................................................... 41  
Configuration Type..................................................................................................................... 41  
Static Parameters....................................................................................................................... 42  
Show Current............................................................................................................................. 45  
ZNet Bridge................................................................................................................................................ 46  
Region ....................................................................................................................................................... 47  
Version Info ............................................................................................................................................... 48  
Restore Defaults ........................................................................................................................................ 49  
Remote Control Operation .............................................................................................................................................. 50  
Troubleshooting................................................................................................................................................................... 52  
Appendix A Specifications .............................................................................................................................................. 56  
Appendix B: Serial Protocol ........................................................................................................................................... 57  
Port Configuration ..................................................................................................................................................... 57  
Messages................................................................................................................................................................... 57  
Unsolicited Feedback notifications............................................................................................................................. 57  
Query/Response Command Structure ....................................................................................................................... 57  
Dump Command Structure ....................................................................................................................................... 58  
Status Command Structure ...................................................................................................................................... 58  
Command Structure................................................................................................................................................... 58  
<COMMAND>............................................................................................................................................................. 58  
Power On/Off/Toggle.................................................................................................................................................. 58  
Select......................................................................................................................................................................... 59  
Display On ................................................................................................................................................................. 59  
Reboot ....................................................................................................................................................................... 59  
Config ........................................................................................................................................................................ 60  
Config RS232 Unsolicited Feedback On/Off............................................................................................................... 61  
UFB On/Off (Unsolicited Feedback)............................................................................................................................ 62  
Boot Version .............................................................................................................................................................. 63  
Code Version.............................................................................................................................................................. 63  
Page 6  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Mode: Direct/Preset................................................................................................................................................... 63  
Digit ........................................................................................................................................................................... 64  
Enter .......................................................................................................................................................................... 64  
Cancel........................................................................................................................................................................ 64  
Group......................................................................................................................................................................... 64  
Preset......................................................................................................................................................................... 65  
MDF (Metadata Feedback) ......................................................................................................................................... 67  
Signal......................................................................................................................................................................... 68  
Scan........................................................................................................................................................................... 68  
AM/FM Band.............................................................................................................................................................. 69  
Tune........................................................................................................................................................................... 69  
Seek........................................................................................................................................................................... 70  
Stereo ........................................................................................................................................................................ 70  
Appendix C: Adding SIRIUS Radio Functionality.................................................................................................... 72  
Connecting the SIRIUS Tuner Module ....................................................................................................................... 72  
Displaying Signal Strength......................................................................................................................................... 72  
Connecting Audio Outputs......................................................................................................................................... 72  
Tuner Activation......................................................................................................................................................... 72  
Selecting the SIRIUS Tuner........................................................................................................................................ 73  
Direct Mode Operation............................................................................................................................................... 73  
Category Mode Operation.......................................................................................................................................... 73  
Preset Mode Operation.............................................................................................................................................. 74  
Recalling Presets ....................................................................................................................................................... 74  
Displaying SIRIUS Firmware Version and Product ID................................................................................................ 74  
Viewing DT22 Firmware Version................................................................................................................................ 74  
© ELAN Home Systems 2009 • All rights reserved.  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Introduction  
Thank you for choosing the ELAN DT22 Dual AM/FM Tuner. The ELAN DT22 Dual Tuner is two AM/FM digital  
tuners in one standard-sized audio component. Each tuner has its own audio output so that each may be listened  
to independently. The DT22 features a total of 396 AM/FM presets plus 396 SIRIUS presets per chassis. When  
used in conjunction with ELAN Touch Panels, the combination of Direct Access tuning and a plethora of Presets  
makes control of the DT22 easy and intuitive – from anywhere in your home.  
The DT22 includes a front panel IR receiver, full function handheld remote, and rear panel control ports for IR,  
VIA!NET and serial control. Two-way feedback, including station call letters, frequency, genre, song name and art-  
ist, can be displayed on any ELAN Touch Panel or Olé Interactive Touchpad without the use of an SS1, SC1 or SC4.  
With a 128 x 64 graphical LCD and front panel button access, the setup is easy. Through guided setup processes  
including Network and Ethernet to a full diagnostics menu that includes signal strength and SIRIUS signal detec-  
tion the DT22 allows the installation to be intuitive. Even the programming of favorite stations by the user is guided  
to allow easy setup.  
NOTE: The SCH1 (sold separately) is all that is needed to add SIRIUS Satellite Radio to an ELAN DT22  
Dual Tuner. Refer to Appendix C for detailed setup and use information.  
Page 8  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Listening to Satellite Radio  
To listen to Satellite Radio, you’ll need to connect a SIRIUS-Ready receiver. SIRIUS Satellite Radio is available to  
residents of the US (excluding Alaska and Hawaii) and Canada.  
Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B,  
Dance, Jazz, Classical and many more plus coverage of all top profesional and college sports including play by play  
games from select leagues and teams. Additional programming includes expert sports talk, uncensored entertain-  
ment, comedy, family programming, local traffic and weather and news from your most trusted sources.  
Once you’ve purchased a Sirius tuner you’ll need to activate it and subscribe to begin enjoying the service. Easy to  
follow installation and setup instructions are provided with the SIRIUS tuner. There are a variety of programming  
packages available, including the option of adding “The Best of XM” to the SIRIUS service enabling you to enjoy  
the most popular programming among both services. Family friendly packages are also available to restrict chan-  
nels featuring content that may be inappropriate for children.  
To subscribe to SIRIUS, U.S. and Candian customers can call 1-888-539 SIRI (1-888-539-7474) or visit sirius.com  
(US) or siriuscanada.ca (Canada).  
SIRIUS, XM and all related marks and logos are trademarks of SIRIUS XM Radio Inc. and its subsidiaries. All other marks and logos are the  
property of their respective owners. All rights reserved. SIRIUS subscription sold seperately. Taxes and a one-time activation fee may apply.  
SIRIUS tuner required (sold seperately) to receive the SIRIUS service. All programming and fees subject to change. It is prohibited to copy,  
decompile, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible  
with the SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Product Highlights  
• Two AM/FM Digital Tuners  
• Satellite Radio Ready. Add one or two SIRIUS Tuner Modules (sold separately)  
• Four Sets of independent Outputs for Multi-Room Listening  
• Link Two DT22s to Provide Up to 4 AM/FM Tuners and 4 SIRIUS Tuners  
• Preset or Direct Numeric Access  
• 4 Preset Groups labeled A, B, C, and D for easy preset organization.  
• 99 flexible presets in each group. Each preset can hold either an AM, FM, or SIRIUS station.  
• 396 Presets shared across 2 AM/FM Tuners plus 396 Presets shared across 2 SIRIUS Tuners.  
• Easy Setup and Diagnostics With Front Panel Buttons and Graphical LCD  
• View Radio Station & “Now Playing” RDS information on ELAN User interfaces (EM version VIA! panels  
only)  
• VIA!NET, Ethernet, Serial and IR Controllable.  
• Use With Any ELAN Wireless Touch Panel, Olé Touch Pad, or EM version LCD Touch Panel.  
• New ELAN SmartSource (Does not require a System SS1, SC1 or SC4 for Two-Way Feedback)  
• Displays RDS (Radio Data System)  
• cTUVus Certified, CE®, CB Scheme, FCC part 15, and C-tick  
Items in package  
• DT22 Tuner  
• Rack Mount Brackets  
• DT22 Remote Control  
• AM Loop Antenna  
• FM Antenna  
• Installation Manual  
• AC line cord  
• SIRIUS Tuner Modules sold separately  
Page 10  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Front Panel (Hard Buttons)  
2
1
3
4
6
5
DT22 Front Panel Controls & Indicators  
Item  
Name  
Item  
Name  
Tuner Select Button  
Power LED  
1
4
Mode Button  
Memory Button  
2
5
Navigation Arrows and Enter Button  
Access Door (Shown Open)  
3
6
© ELAN Home Systems 2009 • All rights reserved.  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Front Panel LCD  
5
1
2
3
4
ST  
FM1  
Y
PRESET  
B01  
6
7
10  
MHZ  
100.1  
PRESET  
XXXX ROCK  
9
Cathexis Dark of  
Night  
100.1 WKRQ  
8
Graphical LCD  
Item#  
Function  
Item#  
Function  
Signal Indicator  
Station Frequency  
1
6
Stereo Indicator  
Custom Text  
2
3
4
5
7
Signal Strength Indicator Bar  
Tuner Mode Indicator  
Current Tuned Preset  
RDS Radio Text  
Station Genre/Category  
8
9
Preset/Direct/Category Mode  
10  
Page 12  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Rear Panel  
1
2
3
7
8
9
4
5
6
19  
18  
17  
16  
15  
12  
11  
10  
14  
13  
Rear Panel Connections  
Item#  
Function  
Item #  
Function  
Power Switch  
AM/FM 2 Analog RCA Output  
AM/FM 1 Analog RCA Output  
SIRIUS 2 Analog RCA Output  
SIRIUS 1 Analog RCA Output  
Ethernet Port  
1
11  
IR IN  
2
3
12  
13  
14  
15  
16  
17  
18  
19  
VIA!NET Input  
B1 Button  
4
SIRIUS Tuner Module 1 Connection  
SIRIUS Tuner Module 2 Connection  
AM/FM 1 Digital Audio Output  
AM/FM 2 Digital Audio Output  
AM Antenna Connector  
5
RS-232 Port  
6
VIA!NET Out  
7
IR OUT  
8
Power Inlet/Fuse Holder  
9
FM Antenna Connector  
10  
© ELAN Home Systems 2009 • All rights reserved.  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Rack Mounting  
When mounting the DT22 Tuner in an equipment rack, use the included Rack Mount Brackets for secure mounting  
and proper ventilation. The DT22 requires two rack spaces.  
To install the DT22 into a standard 19” equipment rack:  
1. Slide the rack mount brackets onto the DT22 chassis from the front as shown in Figure 14-1.  
2. Ensure that the brackets are flush with the front of the unit. Install each of the eight screws (included) through  
the side mounting flanges into the holes in the sides of the unit as shown in Figure 14-2. Hand tighten screws!  
Over-tightening could cause damage to the DT22 Tuner.  
3. Once the brackets are securely mounted, install the entire assembly into a standard 19” equipment rack from the  
front using four rack screws (not included). Two rack spaces will be used. See Figure 14-3.  
19" Equipment Rack  
Rack Screws  
Page 14  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Connections  
IR  
The DT22 can be controlled using the 3.5mm (‘mini’) IR jack on the back panel. There is also an 3.5mm IR Loop  
Output jack included to connect to additional DT22s.  
S128P  
DT22 #1  
TO Second  
DT22 IR IN  
S128P Source IR Out to DT22 IR Loop Connections  
RS-232  
The RS232 port on the back of the unit is used to connect the DT22 to a computer to facilitate firmware updates  
and download tuner configuration parameters for troubleshooting.  
It can also be used to control Direct and Preset features.  
DT22  
1
6
DB9 CABLE  
FROM COMPUTER  
RS-232 Connection  
© ELAN Home Systems 2009 • All rights reserved.  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
VIA!NET  
Use the VIA!NET ports when controlling the DT22 with ELAN Touch Panels, SC-1 Serial Controller, SS1 System  
Station and/or other VIA!NET devices. The VIA!NET ports on the DT22 can be daisy-chained between chassis and  
other VIA!NET devices.  
Use an RJ-45 to RJ-45 interconnect cable to make all VIA!NET connections.  
Use the following diagram when connecting a S86A/S86P and not using an SPP.  
VIA!NET Connections  
If there is not a System SS1 or System SC1 in the system, make the following connections.  
VIA!NET Connections  
Page 16  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
If a System SS1 or System SC1 is in the system, use the following connections.  
To  
SS1/SC1  
VIA!NET  
Connector  
VIA!NET Loop Connection  
Ethernet  
The ETHERNET port can be used to connect the DT22 to a LAN (Local Area Network) connection for Firmware  
Updates. It may also be used by supported software applications to communicate with the DT22. An Ethernet  
cable wired to T568A (or T568B) should be used in conjunction with this connection.  
1
2 3 4  
5
6
7 8  
T568A WIRING STANDARD  
DT22  
1 2 3 4 5 6 78  
ETHERNET  
CABLE  
T568A Ethernet Connection  
© ELAN Home Systems 2009 • All rights reserved.  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
RCA Audio  
Using RCA-type interconnect cables, connect all active tuner audio outputs to pairs of inputs on an ELAN preamp  
controller (e.g. S66A, S86A/P, S128P or to a stereo receiver). Make sure to connect Left channel outputs to Left  
channel inputs and Right channel outputs to Right channel inputs.  
S128P  
RCA PATCH  
CABLES  
DT22  
RCA Audio Connections  
OPTICAL Audio  
Using an Optical interconnect cable, connect TUNER 1 and/or TUNER 2 Optical output(s) to any Optical input(s) on  
a Stereo Receiver, Digital Audio Wallplate, or Home Theater Receiver.  
Digital Optical  
Input  
DT22  
Digital  
Optical  
Cable  
OPTICAL Audio Connections  
Page 18  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
AM Loop Antenna  
DT22  
AM Loop Antenna  
The AM antenna is connected to the terminals marked AM/GND. These connections are not polarity sensitive, so it  
does not matter which wire is connected to the GND or AM terminals.  
To prevent unwanted noise, place the antenna as far away as possible from other electronics, speaker cords, power  
cords and amplifiers.  
FM Antenna  
DT22-240  
REAR PANEL  
F-JACK  
Indoor FM Antenna  
F-CONNECTOR  
Connect the included FM antenna to the FM (coaxial) jack. Generally, a T-type twin lead antenna will be sufficient; if  
you live in an area where the FM signals are particularly weak, it may be necessary to install an outside or rooftop  
antenna.  
If standard FM broadcast frequencies are available via your cable service, you may connect your 75 ohm FM anten-  
na jack to your cable system. Please contact your cable service to discuss this option.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
SIRIUS Tuner Module Connections  
AUDIO  
OUT  
R
L
OPTICAL  
8 PIN  
2
1
3
Front Panel Connections  
Item  
Name  
Analog Audio Out (not used)  
1
8 Pin DIN -- Connects to DT22  
Optical Connection  
2
3
ANT  
DC 5V  
1
2
Rear Panel Connections  
Item  
Name  
5 VDC power connection (not used)  
1
Satellite Antenna Connection  
2
Page 20  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
SIRIUS Satellite Antenna  
Positioning the Sirius Antenna  
Prior to mounting the antenna or finding a permanent home for your DT22, you first want to  
validate the position of the antenna.  
1. Power on DT22 to make sure the SIRIUS module has power.  
You should see a startup screen with the ELAN logo, followed by the main display.  
2. Power off DT22, and then connect the audio cables, IR, and RS232 control interfaces to the other components  
in your audio system.  
3. Align the Antenna as follows:  
For Indoor installation on a flat surface:  
a) Set antenna on its base on a flat horizontal surface.  
b) Turn the base of the antenna so that the SIRIUS logo is facing to the northwest if you are in the eastern  
half of the U.S. and to the north/northeast if you are in the western half.  
Note: It will help to imagine that the SIRIUS satellites are in the sky above northern Minnesota.  
That’s the optimal direction in which you need to aim the antenna.  
c) Use the “Signal Strength” screen, as described on page 74, to optimize antenna tilt angle and position.  
d) If necessary, experiment with different locations near a north-facing window or outside.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
For outdoor installation or indoor wall mounting:  
The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it  
on a horizontal surface.  
a) Holding your antenna up, find a wall location that ensures a strong signal.  
b) Attach antenna to the wall using four screws.  
c) Tilt the antenna fully back on the base, place the antenna base on the four screw heads with the antenna  
pivot at the top, and pull down approximately 1/4 inch until the base is firmly secured. Note that the  
SIRIUS logo will be upside down when the antenna is properly installed.  
d) Tilt the antenna away from the wall/base until the signal strength is optimized.  
4. Power on your sound system and turn the amplifier to a low volume.  
5. Power on DT22 and tune to channel 184, a free preview channel.  
If the system is working, you will hear SIRIUS programming on this channel and can proceed to Step 6.  
If there is a problem with the antenna connection, the DT22’s front panel display will read “Antenna Error”. If  
the antenna does not have a clear path to the satellites, the front panel display will read “Acquiring Signal”.  
Reposition the antenna until you hear music playing.  
6. Finish installing DT22.  
a) House DT22 in its permanent location. Follow the instructions in the section, “Appendix B: Rack  
Mounting”.  
b) Activate the unit following the “Activating SIRIUS radio” instructions.  
Rear Panel Power Switch  
The DT22 master power switch is located on the rear panel. The switch must be in the ON position to allow the  
tuner to operate. To reduce power consumption when away for extended periods of time, set the master switch to  
the OFF position. To return tuner to normal operation, set the switch to the ON position.  
Rear Panel Power Switch  
Operation  
The DT22 provides intuitive control of its various functions via its front panel buttons (as shown on the next page),  
from ELAN Touch Panels and Olé Touchpads, the remote control, and its hard wired IR input. The DT22 is essen-  
tially two completely independent AM-FM radio tuners (add another DT22 for a total of four)—each of which can  
be tuned independently so that different audio channels play in different rooms.  
From the interface within each zone you can:  
Change channels (either by preset or direct tuning)  
View RDS information (on supported panels)  
Page 22  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Default Display  
The default display, as shown below, provides information about the channel each tuner is currently tuned to,  
including category name, channel number, channel name, artist name, and song title.  
ST  
FM1  
Y
PRESET  
B01  
MHZ  
100.1  
PRESET  
ROCK  
Cathexis  
Night  
Dark of  
100.1 WKRQ  
LCD Display  
Front Panel  
D
A
E
B
E
F
D
C
Front Panel Controls  
A. TUNER  
• Switches between Tuner 1, Tuner 2, SIRIUS 1 and SIRIUS 2.  
• Press and Hold to turn the DT22 On or Off.  
B. MODE  
• Displays the Mode Menu on the LCD that allows settings - AM/FM, Preset/Direct/Stereo/Mono - to be changed using  
Arrow Up/Down buttons without the use of a remote.  
C. MEMORY  
Displays the Memory Menu on the LCD that allows Presets to be either saved or deleted using Arrow Up/Down but-  
tons without the use of a remote; each Group (A,B,C,D) has 99 presets.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
D. ARROW Up/Down  
• Use these buttons to Seek after the Tuner button is pressed, navigate the Mode On-Screen-Display after the Mode but-  
ton is pressed or navigate the Memory On-Screen-Display after the Memory button is pressed.  
E. ARROW Left/Right Buttons  
• Use these buttons to Increment/Decrement or Step the frequency after the Tuner button is pressed, do nothing after  
the Mode button is pressed.  
F. F ENTER Button  
Use this button to verify or confirm an intended operation or function.  
In AM/FM, the button is used to bring up overrides, details, exit, in SIRIUS it cycles through data  
Mode Menu  
Mode Menu submenus:  
• AM/FM  
• Preset/Direct  
• Stereo/Mono  
AM/FM  
1) Toggle the Band from AM to FM or from FM to AM.  
2) Press the MODE button.  
3) Highlight AM/FM using the UP arrow or DOWN arrow buttons.  
4) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
B01  
PRESET  
100.1MHZ  
AM/FM  
Preset/Direct  
Stereo/Mono  
Preset/Direct  
Places the Tuner in Preset or Direct mode.  
Direct places the tuner in Direct mode.  
Preset places the tuner in Preset with the current selected Group selected.  
Preset Group A places the Tuner in Preset mode and changes the Tuner to Group A.  
Preset Group B places the Tuner in Preset mode and changes the Tuner to Group B.  
Preset Group C places the Tuner in Preset mode and changes the Tuner to Group C.  
Preset Group D places the Tuner in Preset mode and changes the Tuner to Group D.  
No preset exists for the tuned frequency if “--” is displayed after the group, like it is in the following image “B--”.  
Page 24  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Press the MODE button.  
2) Highlight Preset/Direct using the UP arrow or DOWN arrow buttons.  
3) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
B01  
PRESET  
100.1MHZ  
AM/FM  
Preset/Direct  
Stereo/Mono  
1) Highlight Direct, Preset, Preset Group A, Preset Group B, Preset Group C, or Preset Group D using the UP  
arrow or DOWN arrow buttons.  
2) Press the ENTER button when done.  
Z
PRESET  
Stereo/Mono  
This menu selection switches the FM signal between stereo and mono. Switching to mono mode can make weak  
FM signals sound clearer.  
The Stereo icon will be displayed when in Stereo mode and absent when in Mono mode.  
1) Press the MODE button.  
2) Highlight Stereo/Mono using the UP arrow or DOWN arrow buttons.  
3) Press the ENTER button.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Stereo Icon  
ST  
FM1  
Y
PRESET  
C01  
PRESET  
100.1MHZ  
AM/FM  
Preset/Direct  
Stereo/Mono  
Saving Presets  
Select one of the four Preset Groups A-D.  
1) Tune to a station that is going to be saved.  
2) Press the MEMORY button.  
3) Highlight Save Preset using the UP arrow or DOWN arrow buttons.  
4) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
A01  
PRESET  
100.1MHZ  
Save Preset  
Delete Preset  
EXIT  
1) Press the UP/DOWN arrows to change the first Preset digit.  
2) Press the LEFT/RIGHT arrows select the second Preset digit.  
3) Press the UP/DOWN arrows to change the second Preset digit.  
4) Press the Enter button when done.  
1) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
2) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert to the previous setting.  
3) Highlight Edit using the UP arrow or DOWN arrow buttons to change the preset digits.  
4) Press the ENTER button to commit the selection Edit, Save or Cancel.  
Deleting Presets  
1) Select a preset that will be deleted.  
Page 26  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
2) Press the MEMORY button.  
3) Highlight Delete Preset using the UP arrow or DOWN arrow buttons.  
4) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
A01  
PRESET  
100.1MHZ  
Save Preset  
Delete Preset  
EXIT  
1) Highlight Delete using the UP arrow or DOWN arrow buttons to delete the preset.  
2) Highlight Cancel using the UP arrow or DOWN arrow buttons to abort the delete.  
3) Press the ENTER button to commit either Delete or Cancel.  
Override  
Change Custom Text  
The DT22 provides the ability to override a station’s Custom Text.  
1) Ensure the Tuner is On.  
2) Select a station whose Call Sign you want to change.  
3) Press the ENTER button.  
4) Highlight Override using the UP arrow or DOWN arrow buttons.  
5) Press the ENTER button.  
1) Highlight Call Sign using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
Call Sign  
Genre  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the Enter button.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
CURRENT: ‘WKQQ’  
Edit  
Remove Edits  
EXIT  
1) Press the UP/DOWN arrows to change the characters.  
2) Press the LEFT/RIGHT arrows select the next character.  
3) Press the Enter button when done.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
CURRENT: ‘WKQQ’  
Edit  
Save  
Cancel  
1) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
2) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
3) Highlight Edit using the UP arrow or DOWN arrow buttons to change the Call Sign characters.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
See next page for example  
Page 28  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
CURRENT: ‘WKRQ’  
Edit  
Save  
Cancel  
Remove Custom Text  
1) Ensure the Tuner is On.  
2) Select a station whose Custom Text you want to remove.  
3) Press the ENTER button.  
4) Highlight Override using the UP arrow or DOWN arrow buttons.  
5) Press the ENTER button.  
1) Highlight Call Sign using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
Call Sign  
Genre  
EXIT  
1) Highlight Remove Edits using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
CURRENT: ‘WLRQ’  
Edit  
Remove Edits  
EXIT  
Changing Genre  
The DT22 provides the ability to change a station’s Genre.  
1) Ensure the Tuner is On.  
2) Select a station whose Genre you want to change.  
3) Press the ENTER button.  
4) Highlight Override using the UP arrow or DOWN arrow buttons.  
5) Press the ENTER button.  
1) Highlight Genre using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
Call Sign  
Genre  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
Page 30  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
‘ Rock  
Edit  
Save  
Cancel  
Press the UP/DOWN arrows to change the Genre.  
Press the ENTER button when done.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
‘ Rock  
Edit  
Save  
Cancel  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the Genre.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4)Press the ENTER button to commit either Edit, Save or Cancel.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
‘ Rock  
Edit  
Save  
Cancel  
Removing Genre Override  
The DT22 provides the ability to remove a station’s Genre Override.  
1) Ensure the Tuner is On.  
2) Select a station whose Genre Override you want to remove.  
3) Press the ENTER button.  
4) Highlight Override using the UP arrow or DOWN arrow buttons.  
5) Press the ENTER button.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Highlight Genre using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
Call Sign  
Genre  
EXIT  
1) Highlight Remove Edits using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
ST  
FM1  
Y
PRESET  
D01  
PRESET  
100.1MHZ  
CURRENT: ‘WLRQ’  
Edit  
Remove Edits  
EXIT  
Once the Enter button is pressed, the associated Genre Override is removed.  
Details  
If it is suspected that the DT22 has tuner performance issues, a diagnostic tool is provided to give feedback to the  
installer in conjunction with a troubleshoot call with ELAN Technical Support.  
1) Ensure the Tuner is On.  
2) Select a station whose Details you want to see.  
3) Press the ENTER button.  
4) Highlight Details using the UP arrow or DOWN arrow buttons.  
5) Press the ENTER button.  
See next page for example  
Page 32  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
ST  
FM1  
Y
PRESET  
B01  
PRESET  
100.1MHZ  
Override  
Details  
EXIT  
Details are listed for the selected station.  
FM1  
Valid  
100.1  
: TRUE  
: off  
Soft Mute  
Pilot  
: PRESENT  
: 5%  
Blend  
: 32 dBuV  
: 19 dB  
: -16 kHz  
RSSI  
SNR  
F Offset  
6) To Exit press any button.  
System Configuration  
If the Unit is On, turn it Off:  
1) Press and Hold the TUNER button on the Front Panel to turn the unit Off.  
or Press the Off button on the Remote.  
2) Simultaneously Press and Hold both the LEFT and RIGHT front panel buttons.  
Unit ID  
The DT22 can provide Two-Way feedback status over VIA!NET to Elan Control Panels without the use of a SC1,  
SS1 or SC4. The DT22 must be assigned an Unit ID when connected to the VIA!NET so it can be identified. There  
can only be two DT22s connected to the VIA!NET.  
By default the DT22 is shipped configured to Unit ID 1. For installations with only one DT22, this setting should  
not be changed. However, when adding a second DT22 this setting must be changed to 2 on the second unit  
NOTE: The VIA!NET jack on the back of the DT22 must be used.  
1) Highlight Unit ID using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
MENU  
DT22  
SETUP  
Unit ID  
LCD Settings  
Front Panel IR  
RS232  
Ethernet  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the Unit ID.  
2) Press the Enter button when done.  
3) Highlight Edit using the UP arrow or DOWN arrow buttons to change the Unit ID.  
4) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
5) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
6) Press the ENTER button to commit either Edit, Save or Cancel.  
LCD Settings  
LCD settings can be changed to provide optimum readability in various lighting conditions.  
LCD Settings submenus:  
LCD Timeout  
LCD Contrast  
Page 34  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
LCD Brightness  
1) Highlight LCD Settings using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
Unit ID  
LCD Settings  
Front Panel IR  
RS232  
Ethernet  
LCD Timeout  
This is the amount of time that the front panel’s LCD backlight is active after a Front Panel button press.  
NOTE: It is possible to set the LCD Timeout value to ‘DISABLED’. This will prevent the LCD backlight from ever  
turning off. It is recommended to greatly decrease the LCD Brightness if this value is used. Otherwise the lifetime  
of the LCD backlight will be reduced.  
1) Highlight LCD Timeout using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
LCD Settings  
MENU  
LCD Timeout  
LCD Contrast  
LCD Brightness  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the LCD Timeout time.  
2) Press the ENTER button when done.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the LCD Timeout.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
LCD Contrast  
1) Highlight LCD Contrast using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
LCD Settings  
MENU  
LCD Timeout  
LCD Contrast  
LCD Brightness  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the LCD Contrast.  
2) Press the ENTER button when done.  
See next page for example  
Page 36  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the LCD Contrast.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
LCD Brightness  
1) Highlight LCD Brightness using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
LCD Settings  
MENU  
LCD Timeout  
LCD Contrast  
LCD Brightness  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the LCD Brightness.  
2) Press the ENTER button when done.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the LCD Brightness.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Front Panel IR  
Enables or disables the IR receiver located on the front panel.  
You may want to disable if you experience IR flooding of the front sensor.  
1) Highlight Front Panel IR using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
Unit ID  
LCD Settings  
Front Panel IR  
RS232  
Ethernet  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to Enable or Disable Front Panel IR.  
2) Press the ENTER button when done.  
See next page for example  
Page 38  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to ENABLE or DISABLE Front Panel IR.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
RS232  
RS232 Menu submenus:  
Baud Rate  
Unsolicited Feedback  
1) Highlight RS232 using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
Unit ID  
LCD Settings  
Front Panel IR  
RS232  
Ethernet  
Baud Rate  
1) Highlight Baud Rate using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
RS232 SETTINGS  
MENU  
Baud Rate  
Unsolicited Feedback  
EXIT  
© ELAN Home Systems 2009 • All rights reserved.  
Page 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the Baud Rate.  
2) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the Baud Rate.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Unsolicited Feedback  
The DT22 can automatically send its status whenever its state changes. This is enabled by default.  
1) Highlight Unsolicited Feedback using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
RS232 SETTINGS  
Baud Rate  
Unsolicited Feedback  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
Page 40  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Press the UP/DOWN arrows to Enable or Disable Unsolicited Feedback.  
2) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to ENABLE or DISABLE Unsolicited Feedback.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Ethernet  
Ethernet Menu submenus:  
Configuration Type  
Show Current  
To enter the Ethernet settings menu use the DOWN arrow to highlight Ethernet and press the ENTER button.  
MENU  
DT22  
SETUP  
LCD Settings  
Front Panel  
RS232  
Ethernet  
ZNet  
Configuration Type  
The Configuration Type settings menu allows the DT22 to be set to DHCP or Static IP Address.  
1) Highlight Configuration Type using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
DT22  
SETUP  
MENU  
ETHERNET SETTINGS  
Configuration Type  
Show Current  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to select DHCP or Static.  
2) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change Configuration Type.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Static Parameters  
Static Parameters Menu submenus:  
IP Address  
Netmask  
Gateway  
When STATIC is selected as a configuration type a hidden menu selection called Static Parameters appears.  
Page 42  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Highlight Static Parameters using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
ETHERNET SETTINGS  
Configuration Type  
Static Parameters  
Show Current  
EXIT  
STATIC IP ADDRESS  
1) Highlight IP Address using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
STATIC IP SETTINGS  
IP Address  
Netmask  
Gateway  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the IP Address digit.  
2) Press the LEFT/RIGHT arrows select the next IP Address digit.  
3) Press the ENTER button when done.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change IP Address.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Static Netmask  
1) Highlight Netmask using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
STATIC IP SETTINGS  
IP Address  
Netmask  
Gateway  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
1) Press the UP/DOWN arrows to change the first Static Netmask digit.  
2) Press the LEFT/RIGHT arrows select the next Static Netmask digit.  
3) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change Static Netmask.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Save or Cancel.  
Page 44  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Static IP Gateway  
1) Highlight GATEWAY using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
STATIC IP SETTINGS  
IP Address  
Netmask  
Gateway  
EXIT  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
DT22  
SETUP  
MENU  
STATIC GATEWAY  
192. 168. 1.  
1
Edit  
Save  
Cancel  
1) Press the UP/DOWN arrows to change the first Static Gateway digit.  
2) Press the LEFT/RIGHT arrows select the next Static Gateway digit.  
3) Press the ENTER button when done.  
DT22  
SETUP  
MENU  
STATIC GATEWAY  
192. 168. 1.  
1
Edit  
Save  
Cancel  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change IP Gateway.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Show Current  
Show Current displays the currently assigned IP Address, Mask, and Gateway.  
1) Highlight Show Current using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
DT22  
SETUP  
MENU  
ETHERNET SETTINGS  
Configuration Type  
Show Current  
EXIT  
1) Press the ENTER button when done.  
NOTE: The values shown will be different for your network. Also, these numbers will not be correct until after a  
reboot if the “Configuration Type” or “Static Parameters” values have been changed.  
DT22  
SETUP  
CURRENT IP  
MENU  
169.254. 19.174  
255.255. 0. 0  
IP  
MASK  
GW 255.255. 0. 0  
EXIT  
ZNet Bridge  
The S66A, S128P, and Z630 ELAN multi-room controllers are not VIANet enabled devices. Instead these control-  
lers use an older communication standard called ZNet. An Elan system containing at least one System SS1 or  
System SC1 will automatically convert the older ZNet feedback into VIANet feedback. However, in systems without  
a System SS1 or System SC1, the DT22 can provide this functionality, but must be manually enabled using this  
procedure.  
1) Highlight ZNet using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
LCD Settings  
Front Panel  
RS232  
Ethernet  
ZNet  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
Page 46  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Press the UP/DOWN arrows to select the type of ZNet Bridge.  
2) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the ZNET BRIDGE.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Region  
The DT22 can operate in the United States/North America or Europe/Asia.  
1) Highlight Region using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
RS232  
Ethernet  
ZNet  
Region  
Version Info  
1) Highlight Edit using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
See next page for example  
© ELAN Home Systems 2009 • All rights reserved.  
Page 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
1) Press the UP/DOWN arrows to select the type of Region.  
2) Press the ENTER button when done.  
1) Highlight Edit using the UP arrow or DOWN arrow buttons to change the Region.  
2) Highlight Save using the UP arrow or DOWN arrow buttons to save the change.  
3) Highlight Cancel using the UP arrow or DOWN arrow buttons to revert the previous setting.  
4) Press the ENTER button to commit either Edit, Save or Cancel.  
Version Info  
The Version Info screen shows what version of firmware the DT22 is currently running.  
1) Highlight Version Info using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
RS232  
Ethernet  
ZNet  
Region  
Version Info  
Page 48  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
1) Press the Enter button when done.  
DT22  
SETUP  
MENU  
CURRENT VERSION  
CODE 1.0.3.1  
BOOT 1.0.0.1  
EXIT  
Restore Defaults  
This resets all setup menu options back to the original factory values. This also clears all saved presets and over-  
rides. This will not change the current firmware version.  
1) Highlight Restore Defaults using the UP arrow or DOWN arrow buttons.  
2) Press the ENTER button.  
MENU  
DT22  
SETUP  
Ethernet  
ZNet  
Region  
Version Info  
Restore Defaults  
1) Press the UP/DOWN arrows to select the type of Yes/Reboot or No/Cancel.  
2) Press the ENTER button when done.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Remote Control Operation  
U
A
T
S
B
R
C
D
Q
E
P
F
G
H
I
O
N
J
M
K
L
DT22 IR Remote Control  
A. POWER ON  
Turns the DT22 ON.  
B. DIRECT Button  
Places the DT22 into Direct mode, allowing the user to use the 0-9 numeric buttons to directly enter a channel’s  
frequency.  
C. AM Button  
Selects AM on the selected tuner.  
D. FM Button  
Selects FM on the selected tuner.  
E. Category Button  
Selects Category mode on SIRIUS Tuner 1 or 2 (if equipped).  
F. Manual Up/Down Tuning ButtonsEnter Button  
Increments/Decrements the tuner selection manually.  
Page 50  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
G. Enter Button  
Verify or confirm an intended operation or function. Also toggles SIRIUS  
display between Artist, Title, Composer, and channel name/category.  
U
A
B
H. Mode Button  
Toggles Stereo ON/OFF for FM stations.  
I. AM-FM 1-2 (Tuner 1-2)  
T
Selects AM/FM Tuner #1 or #2 on the unit’s front panel.  
S
J. Preset Buttons A-D  
R
Q
Pressing and releasing a preset button (A-D) will select the preset group  
indicated on the button and place the tuner into preset tune mode. The  
user can then tune to a specific preset in that group by pressing any two  
of the numeric buttons such as 01 or 99.  
C
D
E
P
F
K. Display Button  
G
Activates the front panel LCD and display the metadata for the  
channel that is currently active.  
H
O
N
I
L. Parent Control Button  
J
No function for this model.  
M
K
M. Memory Button  
Saves the current station selection to a preset. After pressing this button,  
the user can either press two numeric buttons to save to a specific preset,  
or press the enter button to save to the next available preset slot.  
L
N. SIRIUS 1-2  
Selects SIRIUS Tuner #1 or #2 (if equipped).  
O. Analog Button  
No function for this model.  
DT22 IR Remote Control  
P. Seek Up/Down Buttons  
Increment/Decrement the tuner selection automatically to the next channel.  
Q. Preset Up/Down Buttons  
Increment/Decrement the Preset station selection to the next programmed Preset channel in memory.  
R. Delete Button  
Deletes a selected channel Preset from memory and is confirmed by pressing the Enter button.  
S. Enter Button  
Verify or confirm an intended operation or function.  
T. 0-9 Numeric Buttons  
These buttons are used for direct station access and recalling presets.  
U. OFF Button  
Turns the DT22 OFF.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Troubleshooting  
Audio Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No power up.  
1. No AC power.  
1. a. Check Power switch.  
b. Connect Power Cord to AC outlet.  
c. Check AC circuit breaker.  
2. Blown fuse.  
2. Replace fuse w/ T2AL type fuse, 2A only.  
No audio.  
1. See No power up  
Symptom.  
1. Press Play, tune station, turn on etc.  
2. Source on Receiver not 2. Select Source on Receiver.  
selected.  
3. Source  
3 a. Consult front panel display to determine Zone selection.  
selected in  
wrong zone. IR  
zone controller  
(keypad etc.)  
connected to  
wrong zone.  
b. Connect IR keypad or touch panel to correct zone.  
4. Output’s  
volume  
4. Increase volume.  
turned all the  
way down.  
5. Speakers or  
volume controls  
miswired  
5. Test known good speaker/volume control at amplifier.  
6. Verify connections.  
or defective.  
6. Zone audio  
output(s) connected  
to wrong amplifier  
input(s).  
Page 52  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No audio  
present in  
any zone.  
1. See above.  
Perform steps above.  
2. External  
amplifier powered  
down.  
Turn amp ON. Ensure that any remote turn on cables are con-  
nected  
at both ends.  
3. External amp  
in protect  
mode.  
Find cause of amp’s protection mode and correct. Miswired  
speakers or volume controls most likely cause.  
IR Control Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No source  
control from  
IR controller  
(keypad,  
hand-held remote, bad.  
etc.).  
1. IR controller not pro-  
grammed.  
Program IR controller.  
2. IR signal path wiring  
Verify IR signal path wiring.  
Check keypads, IR sensors, IR  
distribution blocks, V8 IR Input  
jack, IR emitters, etc.  
IR LED does NOT  
flash  
when button  
pressed.  
Source not select- Incorrect IR  
Verify/correct IR programming.  
ed  
commands  
from IR controller programmed.  
(keypad,  
hand-held remote,  
etc.).  
IR LED DOES  
flash when  
button pressed.  
Intermittant or no IR flooding.  
source or  
Check IR receivers for ambient light or  
plasma TV flooding.  
zone control from  
IR control-  
ler (keypad, hand-  
held  
remote, etc.). IR  
LED flickers  
or is lit constantly.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
RS232 Control Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No source or zone 1. RS-232 controller incor- Verify/correct programming.  
selected rectly  
from RS-232 con- programmed.  
troller.  
2. RS-232 signal path wir- Verify RS-232 wiring. Check wire  
ing bad.  
integrity an pin-out configuration.  
Incorrect source  
and/or zone  
selected.  
The system source select  
RS-232 commands were  
incorrectly programmed.  
Verify/correct programming.  
Acknowledgement 1. The command was for- Verify/correct programming.  
ACK,xxx<CR> is  
not  
matted  
incorrectly.  
received within  
200ms  
2. An error has occurred in Turn unit OFF, then back ON.  
the DT22.  
3. Serial cable not  
connected or  
defective.  
Connect or replace serial cable.  
Connect power, check breakers.  
4. DT22 does not have  
power.  
VIA!NET Control Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No source or zone 1. VIA!NET controller not  
Program VIA!NET controller.  
selected  
programmed.  
from VIA!NET  
controller (VIA!  
2. VIA!NET signal path wir- Verify VIA!NET wiring.  
Touch Panel, etc.). ing bad.  
Incorrect source  
and/or zone  
selected.  
Incorrect system  
commands programmed.  
Verify/correct programming.  
Page 54  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
ETHERNET Control Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
Not able to down- 1. Ethernet I.P. address  
Verify Ethernet I.P. address.  
load firmware  
update.  
incorrect.  
2. Router or DSL Modem Verify connectivity and Power status.  
not connected or powered  
up.  
Verify Ethernet wiring.  
3. Ethernet signal path  
wiring bad.  
Signal Reception Control Troubleshooting Procedures  
Symptom  
Possible Cause/s  
What an authorized installer can do  
No signal recep-  
1. Antenna not plugged in Verify antenna connection.  
tion, or poor sig- to DT22.  
nal reception  
2. Antenna signal path wir-  
ing bad.  
Verify antenna cable wiring  
Technical Support  
If, after carefully following the steps in the Troubleshooting section, you are unable to resolve issues  
with the installation or operation of the DT22, please call ELAN Technical Support at 1-800-622-ELAN  
(3526).  
© ELAN Home Systems 2009 • All rights reserved.  
Page 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Appendix A Specifications  
Table A-1 shows the equipment specifications for the DT22 Multi-Room Integrated Controller.  
DT22 Specifications  
Item  
Description  
Control Ports  
IR In/Out  
(2) 3.5mm jacks  
(2) RJ-45  
(1) Female DB9 (DCE)  
(1) RJ-45 T568A  
VIA!Net In/Out  
RS-232  
Ethernet  
Analog Audio Outputs  
Digital Audio Outputs  
Antenna Inputs  
(4 pr.) RCA Stereo  
(2) Optical TOS Link  
(1) Coax FM Antenna  
(1) AM Antenna Push Terminal  
(2) 8 Pin DIN  
SIRIUS Ready Connectors  
Audio: FM  
Tuning Frequencies  
Frequency Response  
Signal-to-Noise  
76 ~ 108MHz  
300Hz to 15kHz, +0/-3dB  
63dB (Mono) / 58dB (Stereo)  
Audio: AM  
Tuning Frequencies  
Signal-to-Noise  
520 ~ 1710kHz  
56dB  
Power Requirements  
Dimensions w/Feet (2U w/o Feet)  
Weight  
120VAC, 35W / 240VAC 35W  
Fuse Value = 2A  
17 W x 3 1/2 H x 14 D (in.)  
432 W x 89 H x 356 D (mm)  
13.6 lbs/6 kgs  
Page 56  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Appendix B: Serial Protocol  
Port Configuration  
8 data bit, no parity, 1 stop bit  
Baud Rates:  
• 115200: Default, lower speeds will cause increased lag in unsolicited notifications.  
• 57600  
• 38400  
• 19200  
• 9600  
Messages  
Incoming messages must be terminated with a carriage return (13 in decimal or 0x0d in hex.)  
Carriage returns will be represented as <cr> in this document.  
Incoming linefeeds, 10 in decimal or 0x0D in hex, will be ignored.  
All responses and unsolicited notifications will be terminated by carriage return only.  
Unsolicited Feedback notifications  
This is feedback that the DT22 automatically transmits whenever its state changes.  
The <COMMAND> section will state if a response will be sent unsolicited or not.  
Query/Response Command Structure  
Query commands ask the DT22 for information.  
Each main body of the command structure is seperated by a comma (44 in decimal or 0x2C in hex.)  
Query  
• &DT,<dd>,<COMMAND>,<SUBCOMMAND>,?<cr>  
• &DT will always preceed the query  
• <SUBCOMMAND> may or may not be used.  
• Always end in ,?<cr> (comma, question mark, carriage return)  
Response:  
• *DT,<dd>,<COMMAND>,<SUBCOMMAND><cr>  
• *DT will always preceed the response  
• <SUBCOMMAND> may or may not be used.  
• Always end in <cr> ( carriage return)  
© ELAN Home Systems 2009 • All rights reserved.  
Page 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Dump Command Structure  
Dump command structure is a query but does not follow the same response pattern as the Query command struc-  
ture. The Query command structure Response started with a * (asterisk). Dump outputs information in XML.  
Status Command Structure  
Status command structure is a query but does not follow the same response pattern as the Query command struc-  
ture. The Query command structure Response started with a * (asterisk). Status outputs information in formatted  
sentences.  
Command Structure  
Each main body of the command structure is separated by a comma (44 in decimal or 0x2C in hex.)  
&DT,<dd>,<COMMAND>,<SUBCOMMAND><cr>  
dd is the address of the command.  
Valid addresses are:  
• CH: DT22 chassis  
• ST: Selected Tuner  
• R1: First AM/FM radio  
R2: Second AM/FM radio  
S2: Second SIRIUS module  
• S1: First SIRIUS module  
&DT will always preceed the Command:.  
<SUBCommand> may or may not be used.  
<cr> carriage return will always follow the command.  
<COMMAND>  
All commands will be acknowledged if they are successfully decoded.  
Commands which are not understood will be ignored, and no response will be generated.  
The ACK response will look like this: *DT,dd,ACK<cr>  
Power On/Off/Toggle  
Command:  
&DT,CH,POWER,ON<cr>  
Function:  
Turns DT22 on.  
Command:  
&DT,CH,POWER,OFF<cr>  
Function:  
Turns DT22 off.  
Command:  
&DT,CH,POWER,TOGGLE<cr>  
Page 58  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Function:  
Toggles DT22 power state.  
Query:  
&DT,CH,POWER,?<cr>  
Function:  
Queries current power state.  
This command is sent as unsolicited notifications.  
Response:  
*DT,CH,POWER,ON<cr>  
or  
*DT,CH,POWER,OFF<cr>  
Select  
Command:  
&DT,CH,SELECT,nn<cr>  
nn = R1, R2, S1 or S2  
Function:  
Selects an AM/FM or SIRIUS radio to display on the LCD.  
Query:  
&DT,CH,SELECT,?<cr>  
Function:  
Queries the currently selected tuner.  
This response is sent as unsolicited feedback.  
Response:  
*DT,CH,SELECT,R1<cr>  
or  
*DT,CH,SELECT,R2<cr>  
Display On  
Command:  
&DT,CH,DISPLAY,ON  
Function:  
Turns on the LCD backlight.  
Reboot  
Command:  
&DT,CH,REBOOT<cr>  
Function:  
Reboots the DT22.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Config  
Status  
Query:  
&DT,CH,STATUS<cr>  
Function:  
Outputs the current operating conditions stored in the unit.  
The information is in a sentence format.  
Config Status  
Query:  
&DT,CH,CONFIG,STATUS<cr>  
Function:  
Outputs the current configuration stored in the unit.  
The information is in a sentence format.  
Config Preset Status  
Query:  
&DT,CH,CONFIG,PRESETS,STATUS<cr>  
Function:  
Outputs the current preset information stored in the unit.  
The information is in a sentence format.  
Config Overrides Status  
Query:  
&DT,CH,CONFIG,OVERRIDES,STATUS<cr>  
Function:  
Outputs the current override information stored in the unit.  
The information is in a sentence format.  
Config Dump  
Query:  
&DT,CH,CONFIG,DUMP<cr>  
Function:  
Outputs the current configuration stored in the unit.  
The information is in an XML format.  
Page 60  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Config Preset Dump  
Query:  
&DT,CH,CONFIG,PRESETS,DUMP<cr>  
Function:  
Outputs the current preset information stored in the unit.  
The information is in an XML format.  
Config Overrides Dump  
Query:  
&DT,CH,CONFIG,OVERRIDES,DUMP<cr>  
Function:  
Outputs the current override information stored in the unit.  
The information is in an XML format.  
Config Factory Reset  
Command:  
&DT,CH,CONFIG,FACTORY-RESET  
Function:  
Sets all configuration to the factory defaults.  
Unit ID  
Command:  
&DT,CH,CONFIG,UNITID,x<cr>  
x = 1, 2  
Function:  
Sets the unit ID of the DT22.  
DT22 must be rebooted for change to take effect.  
Query:  
&DT,CH,CONFIG,UNITID,?<cr>  
Function:  
Queries the current ID of the DT22.  
Response:  
*DT,CH,CONFIG,UNITID,1<cr>  
or  
*DT,CH,CONFIG,UNITID,2<cr>  
Config RS232 Unsolicited Feedback On/Off  
Command:  
&DT,CH,CONFIG,RS232,UFB,ON<cr>  
© ELAN Home Systems 2009 • All rights reserved.  
Page 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Function:  
Sets DEFAULT state of unsolicited feedback to the RS232 port to on.  
Whenever power is turned off and on, unsolicited data is set to On if this command was sent to the DT22 prior to  
turning off.  
Use UFB On/Off command if unsolicited data needs to be changed during operation.  
Unsolicited feedback is always On for Ethernet by default.  
Command:  
&DT,CH,CONFIG,RS232,UFB,OFF<cr>  
Function:  
Sets DEFAULT state of unsolicited feedback to the RS232 port to off.  
Whenever power is turned off and on, unsolicited data is set to Off if this command was sent to the DT22 prior to  
turning off.  
Use UFB On/Off command if unsolicited data needs to be changed during operation.  
Unsolicited feedback is always On for Ethernet by default.  
Query:  
&DT,CH,CONFIG,RS232,UFB,?<cr>  
Function:  
To query the state of unsolicited feedback.  
Response:  
*DT,CH,CONFIG,RS232,UFB,ON<cr>  
or  
*DT,CH,CONFIG,RS232,UFB,OFF<cr>  
UFB On/Off (Unsolicited Feedback)  
Command:  
&DT,CH,UFB,ON<cr>  
Function:  
Turns on unsolicited feedback for the RS232 port if this command was received from the RS232 port.  
Turns on unsolicited feedback for the Ethernet port if this command was received from the Ethernet port.  
Command:  
&DT,CH,UFB,OFF<cr>  
Function:  
Turns off unsolicited feedback for the RS232 port if this command was received from the RS232 port.  
Turns off unsolicited feedback for the Ethernet port if this command was received from the Ethernet port.  
Query:  
&DT,CH,UFB,?<cr>  
Function:  
Queries the unsolicited feedback state during operation.  
Default state of unsolicited feedback for RS232 is controlled by config value.  
Default state of unsolicited feedback for Ethernet is ON.  
Page 62  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Response:  
*DT,CH,UFB,ON<cr>  
or  
*DT,CH,UFB,OFF<cr>  
Boot Version  
Query:  
&DT,CH,VERSION,BOOT,?<cr>  
Function:  
Queries current boot loader version.  
Response:  
*DT,CH,VERSION,BOOT,1.0.0.1<cr>  
Code Version  
Query:  
&DT,CH,VERSION,CODE,?<cr>  
Function:  
Queries current application version.  
Response:  
*DT,CH,VERSION,CODE,1.0.0.1<cr>  
Mode: Direct/Preset/Category  
Command:  
&DT,dd,MODE, xx<cr>  
Function:  
Puts the desired tuner in one of three modes.  
dd = ST, R1, R2, S1, S2  
xx = DIRECT, PRESET, CATEGORY (Category mode applies only to SIRIUS module)  
Command:  
&DT,dd,MODE,TOGGLE<cr>  
dd = ST, R1, R2  
Function:  
Toggles the DT22 from Preset to Direct or from Direct to Preset.  
Command:  
&DT,dd,MODE,TOGGLE<cr>  
dd = ST, S1, S2  
Function:  
Toggles the DT22 from Preset to Category or from Category to Direct or from Direct to Preset.  
Query:  
&DT,dd,MODE,?<cr>  
© ELAN Home Systems 2009 • All rights reserved.  
Page 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
dd = ST, R1, R2, S1, S2  
Function:  
Query the desired tuner’s mode.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,MODE,DIRECT<cr> or  
*DT,R1,MODE,PRESET<cr> etc.  
Digit  
Command:  
&DT,dd,DIGIT,x<cr>  
dd = ST, R1, R2, S1, S2  
x = 0 - 9  
Function:  
Sends a digit to the desired tuner.  
Enter  
Command:  
&DT,dd,ENTER<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Sends the enter key to the desired tuner.  
Cancel  
Command:  
&DT,dd,CANCEL<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Used to cancel some actions.  
Group  
Command:  
&DT,dd,GROUP,g<cr>  
dd = ST, R1, R2, S1, S2  
g = A, B, C, D  
Function:  
Selects a preset group on the desired tuner.  
Changing preset groups will likely cause the current station to change.  
Query:  
&DT,dd,GROUP,?<cr>  
Page 64  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
dd = ST, R1, R2, S1, S2  
Function:  
Query the desired tuner’s preset group.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,GROUP,A<cr>  
or  
*DT,R1,GROUP,B<cr>  
or  
*DT,R1,GROUP,C<cr>  
or  
*DT,R1,GROUP,D<cr>  
Preset  
Command:  
&DT,dd,PRESET,UP<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Go to next preset on the desired tuner.  
Command:  
&DT,dd,PRESET,DOWN<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Go to previous preset on the desired tuner.  
dd = ST, R1, R2, S1, S2  
Query:  
&DT,dd,PRESET,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query current preset of the desired tuner.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,PRESET,15<cr> (Tuned to preset 15 in current group)  
or  
*DT,R1,PRESET,0<cr> (Not tuned to a preset now)  
Command:  
&DT,dd,PRESET,mm<cr>  
dd = ST, R1, R2, S1, S2  
mm = 1 - 99  
Function:  
Tunes to preset mm.  
Command:  
&DT,dd,PRESET,SAVE<cr>  
© ELAN Home Systems 2009 • All rights reserved.  
Page 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
dd = ST, R1, R2, S1, S2  
Function:  
Begins saving the current station to a preset.  
&DT,R1,PRESET,SAVE<cr> Preset number is specified using the DIGIT and ENTER command.  
&DT,R1,DIGIT,1<cr>  
&DT,R1,DIGIT,0<cr>  
&DT,R1,ENTER<cr>  
Current station is saved to current group’s preset 10.  
If two digits are given, ENTER is not required.  
&DT,R1,PRESET,SAVE<cr>  
&DT,R1,DIGIT,1<cr>  
&DT,R1,DIGIT,7<cr>  
Current station is saved to current group’s preset 17.  
Sending ENTER without any digits will save to the first open preset.  
&DT,R1,PRESET,SAVE<cr>  
&DT,R1,ENTER<cr>  
Timeout is 5 seconds. Preset WILL be saved in case of timeout.  
&DT,R1,PRESET,SAVE<cr>  
&DT,R1,DIGIT,3<cr>  
Wait 5 seconds...  
Current station is saved to current group’s Preset 3.  
Send CANCEL or any other command to prevent saving of preset.  
&DT,R1,PRESET,SAVE<cr>  
&DT,R1,DIGIT,1<cr>  
&DT,R1,CANCEL<cr>  
No preset is saved.  
Command:  
&DT,dd,PRESET,SAVE,mm<cr>  
dd = ST, R1, R2, S1, S2  
mm = 1 - 99  
mm = 0 will save to the first available preset.  
Function:  
Saves the current station to a given preset on currently active group.  
Send Group command first to save to a specific group.  
Command:  
&DT,dd,PRESET,DELETE<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Begins deleting the current tuned preset.  
ENTER command is required to delete.  
If no preset is tuned, nothing is deleted.  
&DT,R1,PRESET,DELETE<cr>  
&DT,R1,ENTER<cr>  
Page 66  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Timeout is 5 seconds. Preset WILL NOT be deleted in case of timeout.  
&DT,R1,PRESET,DELETE<cr>  
Wait 5 seconds...  
Current tuned preset is not deleted.  
Send CANCEL or any other command to cancel a deletion.  
&DT,R1,PRESET,DELETE<cr>  
&DT,R1,CANCEL<cr>  
Command:  
&DT,dd,PRESET,DELETE,ENTER<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Deletes the current preset immediately.  
MDF (Metadata Feedback)  
Query:  
&DT,dd,MDF,G,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query the current Genre / Category / PTY.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,G,Rock<cr>  
Query:  
&DT,dd,MDF,S,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query the current short station / channel name / PI.  
This response will also be sent as unsolicited feedback.  
This is only available and valid for some North American radio stations.  
Response:  
*DT,R1,G,WKQQ<cr>  
Query:  
&DT,dd,MDF,L,?<cr>  
dd = ST, R1, R2  
Function:  
Query the current long station / channel name / PS.  
This response will also be sent as unsolicited feedback.  
In North American this may duplicate RT data.  
Response:  
*DT,R1,L,98.1 The Bull - WKQQ<cr>  
© ELAN Home Systems 2009 • All rights reserved.  
Page 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Query:  
&DT,dd,MDF,A,?<cr>  
dd = ST, S1, S2  
Function:  
Query the current artisit name.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,S1,A,Jeff Beck<cr>  
Query:  
&DT,dd,MDF,T,?<cr>  
dd = ST, S1, S2  
Function:  
Query the current song title.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,S1,T,Amanda<cr>  
Query:  
&DT,dd,MDF,R,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query the current RDS radio text / RT/Composer (for SIRIUS).  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,S1,MDF,R,Amadeus Mozart<cr>  
Query:  
&DT,dd,MDF,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query all metadata  
Response:  
One each of the MDF Responses listed above.  
Signal  
Query:  
&DT,dd,SIGNAL,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Query the current signal level.  
Signal level from 0 to 100 percent.  
This response will also be sent as unsolicited feedback.  
Page 68  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Response:  
*DT,R1,SIGNAL,100<cr>  
Preset Scan  
Command:  
&DT,dd,SCAN,UP<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Begin scanning up through all presets in the current group.  
Each preset is played for 10 seconds.  
Send any other command to stop scanning.  
Command:  
&DT,dd,SCAN,DOWN<cr>  
dd = ST, R1, R2,S1, S2  
Function:  
Begin scanning down through all presets in the current group.  
Each preset is played for 10 seconds.  
Send any other command to stop scanning.  
AM/FM Band  
Command:  
&DT,dd,BAND,AM<cr>  
dd = ST, R1, R2  
Function:  
Switch to AM band on desired tuner.  
This will also switch to the last AM station played on this tuner.  
Command:  
&DT,dd,BAND,FM<cr>  
dd = ST, R1, R2  
Function:  
Switch to FM band on desired tuner.  
This will also switch to the last FM station played on this tuner.  
Query:  
&DT,dd,BAND,?<cr>  
dd = ST, R1, R2  
Function:  
Query the currently selected band of the desired tuner.  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,BAND,AM<cr>  
or  
*DT,R1,BAND,FM<cr>  
© ELAN Home Systems 2009 • All rights reserved.  
Page 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
Tune  
Command:  
&DT,dd,TUNE,fffff<cr>  
dd = ST, R1, R2  
fffff = Desired Frequency  
Function:  
Tune to the given frequency.  
FM: desired frequency divided by 10 kHz.  
EXAMPLE: &DT,R1,TUNE,9810 (Tunes to 98.1 MHz)  
AM: desired frequency divided by 1 kHz.  
EXAMPLE: &DT,R1,TUNE,630 (Tunes to 630 kHz)  
Not all values are valid. Valid values depend on band and region.  
Command:  
&DT,dd,TUNE,ccc <cr>  
dd = ST, S1, S2  
ccc = SIRIUS Channel Number (no leading zeros)  
Function:  
Tunes to specific SIRIUS channel.  
EXAMPLE: &DT,S1,TUNE,8<cr> (Tunes to 80’s channel)  
Not all values are vaild. Valid values depend on SIRIUS subscription.  
Command:  
&DT,dd,TUNE,UP<cr>  
dd = ST, R1, R2, S1. S2  
Function:  
Step up one frequency step/channel number.  
Actual step size depends on band, region and SIRIUS subscription.  
Command:  
&DT,dd,TUNE,DOWN<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Step down one frequency step/channel number.  
Actual step size depends on band, region and SIRIUS subscription.  
Query:  
&DT,dd,TUNE,?<cr>  
dd = ST, R1, R2, S1, S2  
Function:  
Request the currently tuned frequency/channel number.  
This response will also be sent as unsolicited feedback.  
Page 70  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Response:  
*DT,R1,TUNE,10010<cr> (In units of 10kHz for FM) or  
*DT,R1,TUNE,1630<cr> (In units of 1kHz for AM) or  
*DT,S1,TUNE,8<cr>  
(3 digit SIRIUS channel)  
etc.  
Seek  
Command:  
&DT,dd,SEEK,UP<cr>  
dd = ST, R1, R2  
Function:  
Seek up to next valid station.  
Command:  
&DT,dd,SEEK,DOWN<cr>  
dd = ST, R1, R2  
Function:  
Seek down to next valid station.  
Stereo  
Command:  
&DT,dd,STEREO,ON<cr>  
dd = ST, R1, R2  
Function:  
Attempt to force stereo decoding on.  
If a stereo signal is not present, this will do nothing.  
Command:  
&DT,dd,STEREO,OFF<cr>  
dd = ST, R1, R2  
Function:  
Attempt to disable stereo decoding.  
Switching stations will clear this request.  
Command:  
&DT,dd,STEREO,TOGGLE<cr>  
dd = ST, R1, R2  
Function:  
Attempt to toggle stereo decoding on and off.  
If stereo signal is not preset, this will do nothing.  
Switching stations will clear this request.  
Query:  
&DT,dd,STEREO,?<cr>  
dd = ST, R1, R2  
Function:  
Query whether current station is playing in stereo.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
This response will also be sent as unsolicited feedback.  
Response:  
*DT,R1,STEREO,ON<cr>  
*DT,R1,STEREO,OFF<cr>  
Appendix C: Connecting Optional SIRIUS Tuner Modules  
Connecting the Sirius tuner module to the DT22/DT11  
1) Refer to the instructions included with the Sirius tuner module (sold separately) for detailed  
installation information.  
2) Connect the Sirius tuner module to the DT22/11 using the 8 pin DIN cable supplied with the tuner.  
Displaying the signal strength meter  
Using the front panel buttons;  
1) Turn the unit on by depressing the TUNER button for 2 seconds.  
2) Select Sirius Tuner 1 by pressing the TUNER button.  
3) Press and hold MODE button for 2 seconds.  
4) Press ENTER to select Signal Details.  
5) Satellite and Terrestrial signal strength bar graphs are displayed.  
6) Adjust antenna for maximum signal levels.  
7) Repeat process above for Sirius Tuner 2 (DT22 only).  
Connecting RCA outputs to system  
See the diagram on page 16  
A note about activation of the tuner  
SIRIUS Radio is a subscription service and each tuner must be activated. Tune your SIRIUS radio to station 184  
and then;  
Call 1-888-539-SIRIUS  
-OR-  
You’ll need a credit card and the SIRIUS tuner module ID(s) you wish to activate. The 12 digit tuner ID can be  
found on the tuner module, module packaging or by tuning to channel 0.  
Page 72  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
Choosing Sirius tuner 1 or 2 (DT22 only) from the front panel  
1) Press TUNER repeatedly until Sirius 1 or Sirius 2 is displayed  
Choosing Sirius tuner 1 or 2 (DT22 only) from the remote control  
2) Press the SIRIUS 1 or SIRIUS 2 button  
Direct Mode Operation  
The Direct mode of operation allows the user to choose any Satellite radio station.  
Choosing direct mode from the front panel:  
1) Press the MODE button, highlight Direct using the Up/Down arrows then press Enter  
2) While in direct mode:  
a. Left/Right arrows select the previous/next station  
b. Up/Down arrows select the next/previous Category  
Choosing direct mode from the Remote Control  
1) Press the DIRECT button  
2) While in direct mode:  
a. Left/Right arrows select the previous/next station  
b. Up/Down arrows select the next/previous Category  
c. Use the number pad to enter the 3 digit station number and jump directly to that station (i.e. 0-0-8)  
or the 1 or 2 digits plus enter  
Category Mode Operation  
While in Category mode, the unit will only display channels that reside in the currently selected category (i.e. Pop,  
Rock, Country, etc.)  
Choosing category mode from the front panel:  
1) Press the MODE button,  
2) Highlight Category using the Up/Down arrows then press ENTER  
While in Category mode:  
a. Left/Right arrows select the previous/next station within the Category  
b. Up/Down arrows select the next/previous Category  
Choosing Category mode from the Remote Control  
1) Press the CATEGORY button  
© ELAN Home Systems 2009 • All rights reserved.  
Page 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DT22 INSTALLATION MANUAL  
E L A N H O M E S Y S T E M S  
2) While in Category mode:  
a. Left/Right arrows select the previous/next station within selected category  
b. Up/Down arrows select the next/previous Category  
c. Enter 3 digit station number to jump directly to that station (i.e. 0-0-8)  
Preset Mode Operation  
Choosing preset mode from the front panel:  
1) Press the MODE button, highlight Preset using the Up/Down arrows then press ENTER  
2) While in Preset mode:  
a. Left/Right arrows select the previous/next station  
b. Up/Down arrows select the next/previous Preset  
Choosing Preset Mode from the remote control:  
1) Press PRESET A, B, C, or D  
2) While in Preset mode:  
a. Pressing PRESET Up/Down arrows chooses the next/previous preset  
b. Entering the 2 digit preset number (01-99) selects a preset station  
c. Left/Right arrows select the previous/next station  
d. Up/Down arrows select the previous/next station  
Storing a preset (A,B,C,D)  
The DT22 allows for up to 396 Sirius presets that are shared across both tuners. These presets are identified as  
A01 – A99, B01-B99, C01 – C99, and D01 – D99.  
1) Using the front panel, press MODE then use Up/Down/Enter to select Preset Group A, B, C, or D. Tune to the  
Sirius station you wish to store. Press MEMORY, select Save Preset. Use Up/Down/Left/Right/Enter to  
select first and second digit of preset number. Press ENTER and then choose Save.  
2) Using the remote control press PRESET A, B, C, or D. Select Sirius station to be stored. Press MEMORY  
button. Use the number pad to enter two digits for preset to be stored (01-99).  
Recalling a preset (A,B,C,D)  
1) Using the remote control, press PRESET A, B, C, or D. Use the number pad to enter the two digit prese  
number (01-99).  
Displaying the Sirius Firmware Version and Product ID  
1) Press and hold MODE for two seconds. Use Up/Down/Enter to select Module info.  
Viewing the DT22/DT11 firmware version  
1) Turn the unit off by depressing the TUNER button for 2 seconds. The firmware version will appear at the  
bottom of the front panel display (ex. Version 1.1.0.6)  
Page 74  
© ELAN Home Systems 2009 • All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E L A N H O M E S Y S T E M S  
DT22 INSTALLATION MANUAL  
NOTE:  
This product uses the FreeRTOS.org real time kernel.  
FreeRTOS LICENSING (from):  
“The FreeRTOS source code is licensed by the GNU General Public License (GPL) with an exception.  
Page  
The exceptions permits the source code of applications that use FreeRTOS soley through the API published on this WEB  
site to remain closed source, thus permitting the use of FreeRTOS in commercial applications without necessitating that  
the whole application be open sourced. The exception should only be used if you wish to combine FreeRTOS with a pro-  
prietary product and you comply with the terms stated in the exception itself.”  
lwIP  
Copyright (c) 2001-2004 Swedish Institute of Computer Science.  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the follow-  
ing conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-  
claimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. The name of the author may not be used to endorse or promote products derived from this software without specific  
prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
© ELAN Home Systems 2009 • All rights reserved.  
Page 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
ELAN HOME SYSTEMS L.L.C. (“ELAN”) warrants the DT22 Dual AM/FM Tuner to be free from defects  
in materials and workmanship for the period of two years (2 years) from date of purchase. If within the  
applicable warranty period above purchaser discovers that such item was not as warranted above and promptly  
notifies ELAN in writing, ELAN shall repair or replace the item at the company’s option. This warranty shall not apply  
(a) to equipment not manufactured by ELAN, (b) to equipment which shall have been installed by other than an  
ELAN authorized installer, (c) to installed equipment which is not installed to ELAN’s specifications, (d) to equipment  
which shall have been repaired or altered by others than ELAN, (e) to equipment which shall have been subjected to  
negligence, accident, or damage by circumstances beyond ELAN’s control, including, but not limited to, lightning,  
flood, electrical surge, tornado, earthquake, or other catastrophic events beyond ELAN’s control, or to improper  
operation, maintenance or storage, or to other than normal use of service. With respect to equipment sold by, but  
not manufactured by ELAN, the warranty obligations of ELAN shall in all respects conform to the warranty actually  
extended to ELAN by its supplier. The foregoing warranties do not cover reimbursement for labor, transportation,  
removal, installation or other expenses which may be incurred in connection with repair or replacement.  
Except as may be expressly provided and authorized in writing by ELAN, ELAN shall not be subject to any other  
obligations or liabilities whatsoever with respect to equipment manufactured by ELAN or services rendered by ELAN.  
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED  
WARRANTIES EXCEPT WARRANTIES OF TITLE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
ATTENTION: TO OUR VALUED CONSUMERS  
To ensure that consumers obtain quality pre-sale and after-sale support and service, ELAN Home Systems products  
are sold exclusively through authorized dealers. ELAN products are not sold online. The warranties on ELAN products  
are NOT VALID if the products have been purchased from an unauthorized dealer or an online E-tailer. To determine  
if your ELAN reseller is authorized, please contact ELAN Home Systems at (859) 269-7760.  
Lexington, KY  
P/N 9900974 REV A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor L695 User Manual
Electro Voice Speaker S18 User Manual
Electro Voice Speaker System SxA250 User Manual
Euro Pro Convection Oven EP278 User Manual
Extron electronic Switch DAV101CM User Manual
Furuno Marine Radio DSC 5 User Manual
Garland Stereo System 1728mm User Manual
GE Network Hardware JGBS23BEL User Manual
George Foreman Fryer IC300B User Manual
Goodman Mfg Air Conditioner ARUF172916CA User Manual