1
Skip Days ……………………….….…. 27
Changing a Program ……………...………. 34
Program Review …………………...….……. 35
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Models #9400 & #9408
Quick Start
Programming the timer is quick
and easy. Just answer the
questions flashing on the screen.
Press “OK” to start programming.
Use “Arrow” keys to review functions to set and “OK” to select
that function. Then as they flash,
use the “Arrow” keys to set hours,
minutes, am/pm, or day and “OK”
to accept that setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Models #9400 & #9408
Detachable Electronics
Easy to Program
The electronics portion of the
timer can be removed from
the valve section for easier
programming. Press the gray
buttons on each side of the
timer body to release the
electronics.
After programming, slide the
electronics back over the
valve until the gray buttons
snap back into place.
Just squeeze the side
grips and pull to remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Models #9400 & #9408
Press any key (including
On/Off) to activate the
screen.
On/Off is used to
the valve.
The display will power down
if no keys are pressed
within 2 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Detailed Set Up
Time and Day
Models #9400 & #9408
12:00A Sunday
To Set Press OK
The screen will be flashing
“To Set Press OK.”
Press “OK” to begin.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Detailed Set Up
Time and Day
Models #9400 & #9408
Set Time & Day > OK
Set Program 1
“Set Time & Day” will be
Press “OK” to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Detailed Set Up
Time and Day
Models #9400 & #9408
Set Hour Now
:00 A
Then OK
12
“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK” to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Detailed Set Up
Time and Day
Models #9400 & #9408
Set Minutes Now
12: A Then OK
00
“Minutes” will flash
next.
Use up and down
arrows to set the
minutes.
Press “OK” to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Detailed Set Up
Time and Day
Models #9400 & #9408
Set AM OR PM Now
12:00 A Then OK
“A” for a.m. or
“P” for p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Detailed Set Up
Time and Day
Models #9400 & #9408
Set Day
12:00 A
& OK
Sunday
be flashing.
Choose day of week
with arrow keys.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Watering Time
Models #9400 & #9408
Set Program 1 OK
>
Set Program 2
be flashing.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Watering Time
Models #9400 & #9408
Program 1
Set Start Time 1
12:00 A
Then OK
“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Watering Time
Models #9400 & #9408
Program 1
Set Start Time 1
12:00 A
Then OK
“Minutes” will flash.
Use up and down
arrows to set the
minutes.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Watering Time
Models #9400 & #9408
Program 1
Set Start Time 1
12:00 A Then OK
“A” for a.m. or
“P” p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Watering Time
Models #9400 & #9408
Program 1
Set End Time 1 OK
>
Days to Water
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Watering Time
Models #9400 & #9408
Program 1
Set End Time 1
12:00 A
Then OK
“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Watering Time
Models #9400 & #9408
Program 1
Set End Time 1
12:00 A
Then OK
“Minutes” will flash.
Use up and down
arrows to set the
minutes.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Watering Time
Models #9400 & #9408
Program 1
Set End Time 1
12:00 A
Then OK
“A” for a.m. or
“P” p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Watering Days
Models #9400 & #9408
Program 1
Days to Water
Set Skip Days
OK
>
“Days to Water” will
be flashing.
Choose either
“DAYS TO WATER”
by pressing “OK” or
arrow down to select
“SET SKIP DAYS.”
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Watering Days
Models #9400 & #9408
Program 1
Water on Sun
Set Then OK
Yes
>
If “Days to Water” is
selected, Water on
Sunday” with “Yes”
flashing is shown.
Use up and down
arrows to choose
“Yes or No.”
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Watering Days
Models #9400 & #9408
Program 1
Water on Mon
Set Then OK
Yes
>
Water on Mon with
“Yes” flashing is
shown.
Use up and down
arrows to choose
“Yes or No.”
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Watering Days
Models #9400 & #9408
Program 1
Water on Tue
Set Then OK
Yes
>
Repeat for remaining
days of the week, using
arrow keys to set “Yes” or
“No” and “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Watering Days
Models #9400 & #9408
Program 1
Water on Sat
Yes
>
Set
Then OK
After Saturday is complete,
flashing.
Press down arrow to choose
“FINISHED PGM 1” and
press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Set Additional Programs
Models #9400 & #9408
Program 2
Set Program 2 > OK
Set Program 3
“Set Program 2” will be flashing.
Press “OK” to begin
programming Program 2.
Follow the steps used for
Program 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Set Additional Programs
Models #9400 & #9408
Program 2
Set Program 2 > OK
Set Program 3
2, 3, 4, 5, 6, 7 or 8, use
arrow keys to move to
“Review Programs” or
“Finished.”
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Set Skip Days
Models #9400 & #9408
Program 1
Set Skip Days > OK
Finished PGM 1
If Set Skip Days was
chosen, “Set Skip Days”
will be flashing.
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Set Skip Days
Models #9400 & #9408
Program 1
Water Ea 2nd Day
Set
& OK
No
If using “SET SKIP DAY,”
Timer will begin watering
on the day program is set.
For example, if you
program your timer on
Sunday, and you choose
“every 2nd day” then your
watering schedule will be:
S M T W T F S
X
X
X
X
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Set Skip Days
Models #9400 & #9408
Program 1
Water Ea 2nd Day
Set
& OK
No
You can water every 2nd
day or every 3rd day.
Use up and down arrows
to choose “Yes or No” to
“water every 2nd day” OR
“water every 3rd day.”
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Set Skip Days
Models #9400 & #9408
Program 1
Finished PGM 1
Set Start Time 1
>
“Finished PGM 1”
will be flashing.
Press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Set Additional Programs
Models #9400 & #9408
Program 2
Set Program 2 > OK
Set Program 3
“Set Program 2” will be flashing.
Press “OK” to begin
programming Program 2.
Follow the steps used for
Program 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Set Additional Programs
Models #9400 & #9408
Program 2
Set Program 2 > OK
Set Program 3
If not setting Programs 2, 3, 4, 5, 6, 7 or 8, use arrow
keys to move to “Review
Programs” or “Finished.”
Press “OK.”
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Set Skip Days
Models #9400 & #9408
NOTE: If Set Skip Days is
set to yes, you cannot
choose Watering Days in
the same program.
To change a program
back to Watering Days, go
to Set Skip Days and
choose “No” to water
each 2nd and 3rd days.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Changing a Program
Models #9400 & #9408
To make changes to a
program, press any key
(including On/Off) to activate
the screen.
Press “OK.”
Use the down arrow to
choose PGM Set/RePgm
and Press “OK.”
Use arrow keys to scroll
through programs.
Press “OK” to choose
program to reset.
Repeat programming steps.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Program Review
Models #9400 & #9408
With “Review Program” flashing,
Press “OK.”
To review Program 1, press down arrow
key. Screen will show letters for each
day of the week and “Y” for yes or “N”
for no for each day. To the right it will
show start time on top and stop time on
Press arrow key to review Programs 1
through 8.
After Program 8, “Review Done” flashes.
Press “OK” to exit this section.
“Finished” will flash.
Press “OK” if finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
