Operating and Assembly Instructions
CK 481-6..
Electronic Glass-Ceramic Cooktop
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking with your new glass-ceramic
cooktop will be even more fun than before.
The appliance offers you the following
advantages:
– A generous cooking area.
– Cooking zones for large pans and oval shaped
roasters – the cooking zone size can be adjusted
individually using the combination feature.
– Easy operation through sensor pads.
To ensure that you will be able to use this
appliance in all its diversity, read through
the operating and assembly instructions
conscientiously before operating it for the first
time. The instructions contain important notes
on use, installation and maintenance of the
appliance.
On the following pages you will find important
notes on safety and operation. These will serve to
ensure your personal safety and the lasting value
of your appliance.
You will find notes on page 4 that you ought to
observe before operating the appliance for the
first time.
The chapters entitled “Features", “Operating
principles" and “Operation" tell you all about what
your appliance can do and how you operate it.
The chapter entitled “Cleaning and care" will
make sure that your appliance will stay operable
and beautiful for a long time.
And now we wish you lots of fun cooking.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safeguards
4. a) Use Proper Pan Size – This appliance is
equipped with one or more surface units of
different size. Select utensils having flat
bottoms large enough to cover the surface
unit heating element. The use of undersized
utensils will expose a portion of the heating
element to direct contact and may result in
burned clothing. Proper relationship of utensil
to burner will also improve efficiency.
1. Read All Instructions.
2. To eliminate the risk of burns or fire by reaching
over the heated surface units, cabinet storage
space located above the surface units should be
avoided. If cabinet storage is to be provided, the
risk can be reduced by installing a range hood
that projects horizontally a minimum of 5 inches
(127 mm) beyond the bottom of cabinets.
b) Never Leave Surface Units Unattended at
High Heat Settings – Boilover causes smoking
and greasy spillovers that may ignite.
c) Glazed Cooking Utensils – Only certain types
of glass, glass / ceramic, ceramic, earth-
enware or other glazed utensils are suitable
for rangetop service without breaking due to
the sudden change in temperature.
d) Utensil Handles Should Be Turned Inward and
Not Extend Over Adjacent Surface Units –
To reduce the risk of burns, ignition of
flammable materials, and spillage due to
unintentional contact with the utensil, the
handle of a utensil should be positioned so
that it is turned inward, and does not extend
over adjacent surface units.
3. Important instructions
a) Ensure that this appliance is properly
connected and grounded by a qualified
electrician.
b) Never use this appliance for warming or
heating the room.
c) Do Not Leave Children Alone – Children
should not be left alone or unattended in area
where appliances are in use. They should
never be allowed to sit or stand on any part
of the appliance.
d) Wear Proper Apparel – Loose fitting or
hanging garments should never be worn
while using the appliance.
e) User Servicing – Do not repair or replace
any part of the appliance unless specifically
recomended in the manual. All other
servicing should be referred to a qualified
technician.
f) Storage in or on Appliance – Flammable
materials should not be stored in an oven or
near surface units.
5. a) Do Not Cook on Broken Cooktop – If cooktop
should break, cleaning solutions and
spillovers may penetrate the broken cooktop
and create a risk of electric shock.
Contact a qualified technician immediately.
b) Clean Cooktop With Caution – If a wet
sponge or cloth is used to wipe spills on a hot
cooking area, be careful to avoid steam burn.
Some cleaners can produce noxious fumes if
applied to a hot surface.
g) Do Not Use Water on Grease Fires – Smother
fire or flame or use dry chemical or foam-type
extinguisher.
h) Use Only Dry Potholders – Moist or damp
potholders on hot surface may result in burns
from steam. Do not let potholders touch hot
heating elements. Do not use a towel or other
bulky cloth.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
6. CAUTION:
8. The surface temperature of the glass top is pro-
tected by high limit thermostats built into each
individual burner. The maximum temperature of
the glass ceramic top is rated at 1 080° F. The
thermal protectors are rated at 939° F to cycle
the burner off in order to protect the glass top.
Do not store items of interest to children in
cabinets above a range. Children climbing on
the appliance to reach items could be seriously
injured.
7. DO NOT TOUCH SURFACE UNITS OR AREAS
NEAR UNITS – Surface units may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns.
During and after use, do not touch or let clothing
or other flammable materials contact heating
elements or areas near units until they have had
sufficient time to cool.
Even on the highest setting, it is normal for the
burner to cycle on and off momentarily as the
thermostat senses a high heat condition. This
could be caused by size of the cooking utensil,
composition and gauge of materials in the
construction of the utensil and, most importantly,
the amount of surface contact between the glass
surface and the cooking utensil. Uneven
surfaces on cookware can cause premature
cycling of the high heat limit protection system.
9. Note – To avoid jeopardising the electrical
safety of the appliance, it is forbidden to use
high-pressure or steam jet cleaning devices.
10.Save These Instructions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Important notes
For your safety
You must not operate the appliance if it is damaged. Do not store any substances that are sensitive to
high temperatures, or which pose a fire hazard (e.g.
The appliance must only be connected by
cleaning agents or spray cans), in drawers or
an authorised specialist, paying attention to
cupboards under the appliance.
the relevant regulations of the power supply
companies and the regional construction
regulations.
Observe the assembly instructions!
The appliance could be damaged if connected
wrongly!
Operation of the appliance must be discontinued
immediately if improper use produces cracks,
breaks or flaws on the cooking surface, with the
result that live parts can come into contact directly
or indirectly with seeping liquid or if there is a risk
of injury. Remove the mains plug or switch off the
corresponding mains fuse. Call after-sales service!
When connecting electrical appliances in the
proximity of cooking surfaces and ovens, make sure
that connecting cables do not become jammed
under the hot oven door or come into contact with
hot cooking surfaces.
Isolate the appliance from the mains during every
maintenance operation. To do this, remove the
mains plug or switch off the corresponding fuse.
Only ever operate the appliance under supervision.
Observe caution with oils and fats. Overheated oils
and fats can easily cause fires.
Repairs must be carried out by authorised
specialists, thus ensuring electrical safety.
As the user, you are responsible for maintenance
and proper use in the household. No warranty
claims can be lodged for any damage resulting
from failure to observe these instructions.
Caution: the appliance heats up during operation.
Keep children away.
Do not operate the cooking positions without pots
and pans placed on them.
Subject to technical change without notice.
To avoid jeopardising the electrical safety of the
appliance, do not use high-pressure or steam jet
cleaning devices.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating for the first time
About use
Remove the packaging from the appliance and
dispose of it according to local regulations. Be
careful to remove all accessories from the
packaging. Keep packaging elements and plastic
bags away from children.
The appliance is intended solely for household use
and must not be put to any other uses.
Use the appliance to prepare meals only. Do not use
the appliance to heat up the room in which it is
installed.
Check the appliance for transport damage before
installing it.
Do not use the cooking surface as space to store
items. Do not place any hot pots on the display
panel.
The appliance must be installed and connected by
an authorised specialist before operation. Before
operating the appliance for the first time, make
sure that the mains connection is in proper working
order.
Place a cooking vessel on the corresponding
cooking zone before operating it. Do not remove
the cooking vessel until you have switched off the
hotplate. The size of pots and pans should corres-
The serial number of the appliance can be found on pond to the size of the hotplate. This will save you
the quality control slip which is included with these
instructions. This quality control slip should be kept,
for guarantee reasons, together with your operating
and assembly instructions.
energy and time.
Switch off the cooktop after use.
Iridiscent discoloration can be caused by the bases
of some pots. These do not interfere with the
operation of the glass ceramic cooktop.
Read through these instructions attentively before
operating your appliance for the first time.
Always keep the cooking area and control panel
dry and clean. The surface can be scratched due to
dirt (e.g. sand grains).
Thoroughly clean the appliance and accessories
before using them for the first time. This will
eliminate any 'newness' smells and soiling (see
chapter “Cleaning and care”).
Never heat food in aluminium or plastic containers
as the material can melt and damage your cooktop.
Tip: if you have a glass insurance, we recommend
that you have your new glass-ceramic cooking
range included.
Built-in overheating protection prevents overheating
of the appliance and of surrounding kitchen
furniture.
If installed above a pyrolytic oven, the overheating
protection may be triggered when the cooktop is
operated during a pyrolytic cleaning cycle.
In the event of malfunction, first check your
household fuses. If the power supply is in proper
working order, but the appliance is still not
functioning, please inform your specialist dealer or
your nearest Gaggenau after-sales service.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Features
Features of the appliance
1 SuperQuick cooking zone Ø 5 3/4 (1050 W),
converts to Ø 8 1/4 (2200 W)
2
3
or to Ø 11 (3080 W)
2 SuperQuick cooking zone Ø 7 1/8 (1800 W)
3 SuperQuick cooking zone Ø 7 1/8 (1800 W)
cooking zones 2 and 3 plus additional zone
800 W convert to 7 1/8 x 16 3/8 (4400 W)
4 SuperQuick cooking zone Ø 5 3/4 (1200 W),
5 Display panel
1
4
5
Control panel
6 Cooking level display
7 Cooking zone selection
8 Main switch
9 Timer display
6
10 Timer switch
11 UP-/DOWN-symbols to select cooking level
7
and timer
12 Cooking zone extension switch
12 11
10
9
8
You can order the following special accessory:
BT 481-000 Non-stick coated roaster with lid,
suitable for the roasting zone
Special accessories
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Operating principles
The cooking range is operated by touch control
sensors. Touch the required sensor pad in the
shaded area as shown in the picture. You only need
to touch the pad with your finger, no pressure is
required. Every accepted input is confirmed by an
audible signal.
Sensor pads
Always keep the control panel clean. Do not place
hot cooking dishes on the control panel.
When you touch more than one sensor pad
simultaneously or if any object (e.g. cooking spoon,
dish cloth) lie on the sensor pads, the appliance
registers this as an error. No input is registered and
several short tones are sounded.
When the appliance is switched on, a spot lights up
on the main switch symbol.
Display
The given cooking level is shown on the display of
each cooking zone.
A flashing display shows that a value has not yet
been confirmed.
The residual heat display appears on the display of
the relevant cooking zone after switching off.
Residual heat display
The moving zero in the cooking level display
indicates that, after switching off, a cooking zone
has still not cooled down to such an extent that it
can be safely touched.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional features
Cooking zone extension page 14-15
Overheating protection page 19
The front left cooking zone can be extended to a
middle or large diameter.
The electronics of the cooking range are equipped
with an overheating protection.
Both rear cooking zones convert, together with an
additional zone, to an oval cooking zone especially
suitable for roasters.
Holiday safeguard page 19
If you should ever forget to switch off a cooking
zone after use, the appliance is set to automatically
switch off a cooking zone 4 hours after the last
operation.
Automatic quick-boil function page 16
The cooking range features an automatic quick-boil
function. The feature is selected by touching the
required cooking zone twice on the control panel.
The cooking zone returns to the selected level after
the quick-boil time has expired.
Child lock page 19
It is possible to avoid switching on the appliance
accidentally by using the child lock. The child lock
function is de-activated when delivered and must
be chosen in the options menu.
Memory function page 12
The cooking range stores all the set cooking levels
and time values for 15 seconds after it has been
switched off. You are therefore able to retrieve all
the previous values should you switch it off
accidentally.
Options menu page 20-23
Using the options menu, the automatic quick-boil
function, cooking zone extension and the child lock
can be programmed to suit your individual needs.
Timer page 17-18
It is possible to program an automatic switch-off
time for one or several of the cooking zones. It is
also possible to use the timer independently.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Operation
Switching the cooktop on and off
Switching the cooktop on and off
Touch the main switch symbol. An audible signal is
sounded and a spot lights on the main switch
symbol. All the cooking zone display show 0. The
cooktop is now in operation.
If no further inputs are made within approx.
20 seconds the cooktop automatically switches off.
By touching the main switch symbol at any time the
cooktop can be quickly switched off.
Switching on a cooking zone
Switching on a cooking zone
The cooktop must be switched on by the main
switch. The switching on and off for all cooking
zones is identical.
• Touch the required cooking zone in the control
panel. The zero on the display of the selected
cooking zone flashes.
• Select the required cooking level within
5 seconds using the UP/DOWN symbols.
(You can immediately select level 9, 8, etc. using
the DOWN symbol.) The display of the cooking
zone flashes the chosen level. Note: if no input is
given within 5 seconds the cooking zone must be
re-activated.
• The selected cooking level is confirmed after a
few seconds by an audible signal and the display
lights constantly. Alternatively you can confirm the
values by again touching the cooking zone in the
control panel.
• The cooking zones are elecronically controlled
and during use, in order to maintain a constant
heat, the cooking zone switches on and off
intermittently.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the cooking level
• Touch the required cooking zone in the control
panel. The display of the cooking zone flashes.
Changing the cooking level
• Select the required cooking level using the
UP/DOWN symbols. The display of the cooking
zone shows the chosen level.
Switching off a cooking zone
• Touch the required cooking zone in the control
panel. The display of the cooking zone flashes.
Switching off a cooking zone
• Touch the the UP/DOWN symbols simultaneously.
Or: Touch the the DOWN symbol, until the display
of the cooking zone shows a zero. The cooking
zone is now switched off.
• The residual heat symbol lights in the display of
the cooking zone.
Note: if you want to switch off the whole cooktop
(i.e. when something is boiling over) then simply
touch the main switch.
Residual heat display
Residual heat display
Once you have switched off a cooking zone,
residual heat is shown on the display as a moving
zero. This indicates that the cooking zone is still
giving off heat and has not cooled down sufficiently
to be touched safely.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The cooking range stores all the set cooking levels
and time values for 15 seconds after it has been
switched off. You are therefore able to retrieve all
the previous values should you switch it off
accidentally.
Memory function
Proceed as follows:
• Touch the main switch. The previous values flash
on the display panel.
• Should you wish to accept the stored values:
tap the symbol timer within 5 seconds. You will
hear a signal. The previous values are now
accepted.
• Failure to follow the above procedure exactly
results in the stored values being lost.
Pots and saucepans should always be covered by a
matching lid. The cooking time is shortened and
the energy use reduced.
Energy saving tips
Pay attention to the right size when choosing pots
and pans. The diameters of pots and pans should
correspond to that of the hotplate. When buying
pots, pay attention to the fact that the manufacturer
frequently specifies the top pot diameter, which is
generally larger than the diameter of the base.
We recommend that you use high quality pots and
pans with thick flat bases.
For longer cooking times, it is possible to switch off
the cooking zone before the end of the cooking
time to make use of the residual heat.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings table
Cooking
level
Cooking method
Examples
9
Boiling
Water
Searing
Heating
Boiling
Meat
Fat, liquids
Soup, sauce
Vegetables
Blanching
8 - 6
7 - 6
Roasting
Meat, fish, potatoes
Browning
Flour, onions
Roasting
Almonds, breadcrumbs
Pancakes, egg dishes
Liquids
Baking
Boiling in open pot
6 - 5
5 - 4
Frying
Bacon
Reducing
Stocks, sauces
Simmering
Simmering in open pot
Sweet sauces
Dumplings, sausages, soup garnish,
meat stock, poached eggs
4 - 3
3 - 1
Boiling with closed lid
Steaming
Pasta, soup, sauces
Vegetables, potatoes, fish
Vegetables, fruit, fish
Stewing
Braising
Thawing
Goulash, rolled beef steaks, roasts, vegetables
Frozen foods
Slow cooking
Rice, pulses
Reheating / keeping warm
Melting
Soup, casserole, vegetables in a sauce
Butter, chocolate
Thickening
Egg dishes
Switch to the highest cooking level in order to reach the required temperature quickly. Then always switch
back to the lower cooking level.
The cooking levels are identical for all cooking zones.
The values given above must be looked upon as recommended values. The heat required depends not
only on the type and condition of the food, but also the size and contents of the pot.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Additional functions
The front left cooking zone can be extended to a
middle or large diameter. In the options menu it is
possible to choose the larger diameters as the
standard cooking zone.
Cooking zone extension front left
Activating extension,
front left cooking zone
Activating extension,
front left cooking zone
The cooktop must be switched on by the main
switch.
• Touch the front left cooking zone in the control
panel. The zero on the display of the cooking zone
flashes.
• Touch the + symbol until the symbol for the
required extension flashes on the display.
• Now select the required cooking level using the
UP/DOWN symbols. The display of the cooking
zone flashes the chosen level.
• The selected cooking level is confirmed after a
few seconds by an audible signal and the display
lights constantly. Alternatively you can confirm the
values by again touching the cooking zone in the
control panel.
De-activating extension,
front left cooking zone
De-activating extension,
front left cooking zone
• Touch the front left cooking zone in the control
panel. The cooking level on the display of the
cooking zone flashes.
• Touch the + symbol until the symbol for the
required extension disappears from the display.
• The cooking zone will now continue to operate on
the chosen level without the extension.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Both rear cooking zones convert together with an
additional zone, to create an oval cooking zone
especially suitable for roasters. In the options menu
it is possible to choose the oval cooking zone as the
standard cooking zone.
Cooking zone extension rear
Activating extension,
rear cooking zones
Both rear cooking zones and the additional zone
operate as one single cooking zone. Each input for
one cooking zone will include both cooking zones
and the additional zone.
Activating extension, rear cooking zones
The cooktop must be switched on by the main
switch.
• Touch either of the rear cooking zones in the
control panel. The zero on the display of the
cooking zone flashes.
• Touch the + symbol. The extension symbol flashes
on the display.
• Now select the required cooking level using the
UP/DOWN symbols. The display of both cooking
zones flashes the chosen level.
• The selected cooking level is confirmed after a
few seconds by an audible signal and the display
lights constantly. Alternatively you can confirm the
values by again touching the cooking zone in the
control panel.
De-activating extension,
rear cooking zones
De-activating extension, rear cooking zones
• Touch either of the rear cooking zones in the
control panel. The cooking level on the displays of
both cooking zones flashes.
• Touch the + symbol. The extension symbol
disappears from the display.
• Both cooking zones will now continue to operate
on the chosen level without the extension. Both
cooking zones can now be adjusted and used
seperately.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
All cooking zones feature an automatic quick-boil
function. When the automatic quick boil function is
activated, the set cooking level is boosted for
several minutes. This ensures that the continued
cooking or simmering temperature of the food is
reached faster. The length of the automatic quick-
boil function can be changed in the options menu.
The appliance is pre-set to a standard of four
minutes on delivery. The appliance switches
automatically to the set simmering or cooking level
after the quick boil time has elapsed.
Automatic quick-boil function
Switching on the automatic quick-boil
function
Note: the automatic quick boil function cannot be
activated when using cooking level 9.
Switching on the automatic quick-boil function
The cooktop must be switched on by the main
switch.
• Touch the required cooking zone in the control
panel. The zero on the display of the selected
cooking zone flashes.
• Now select the required cooking level using the
UP/DOWN symbols. The display of the cooking
zone flashes the chosen level.
• The selected cooking level is confirmed after a
few seconds by an audible signal and the display
lights constantly. Alternatively you can confirm the
values by again touching the cooking zone in the
control panel.
2x
• Re-touch the cooking zone in the control panel
twice. The display of the cooking zone flashes
alternatively the chosen level and the symbol A for
automatic quick-boil.
Switching off the automatic quick-boil
function
Switching off the automatic quick-boil function
It is possible to switch off the automatic quick boil
function prematurely (e.g. because the food is
boiling over).
• Touch the required cooking zone in the control
panel twice. The symbol for automatic quick-boil
disappears from the display. The cooking zone
switches back to the set cooking level.
2x
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: only ever operate the appliance under
supervision.
Timer operation
It is possible to program an automatic switch-off
time for one or several of the cooking zones. Any
value between 1 and 90 minutes can be entered on
the timer.
It is also possible to use the timer independently.
The timer can also be used when the cooktop is
switched off.
Programming a switch-off time
• Set the cooking zone which you want to time to the
required cooking level.
Programming a switch-off time
• Touch the timer symbol. The timer display flashes
00. Select the required time using the
UP-/DOWN-symbols.
• The value is confirmed a few seconds later by an
audible signal and the timer starts. Alternatively
you can confirm the values by again touching the
timer symbol in the control panel.
• Touch the cooking zone in the display panel which
you would like to timer operate. The display
flashes the selected cooking level. Touch the
timer symbol.
• A spot appears next to the cooking level on the
cooking zone display. The timer is now set for this
cooking zone.
• After the elapse of the programmed time an
audible signal is sounded. The selected cooking
zone is switched off. Both the selected cooking
value and the timer flash. By touching any symbol
on the display the audible signal is switched off
and the cooking zone display shows zero.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing or erasing a given time value
• Touch the timer symbol.
Timer operation
• You can now change the programmed time using
the UP-/DOWN-symbols. Touch the UP-/DOWN-
symbols simultaneously or touch the DOWN-
symbol, until 00 shows on the display. The spot on
the cooking zone display disappears. The timer
program is now switched off. The cooking zone
remains on the selected cooking level without
timer operation.
Programming the timer without cooking zone
switch-off
It is also possible to use the timer independently
from the cooking zones and without switch-off
function.
Programming the timer without
cooking zone switch-off
Any value between 1 and 90 minutes can be
entered on the timer.
• Touch the timer symbol. The timer display flashes
00. Select the required time using the
UP-/DOWN-symbols.
• The value is confirmed a few seconds later by an
audible signal and the timer starts. Alternatively
you can confirm the values by again touching the
timer symbol in the control panel.
• The timer display shows the elapsed time.
• After the elapse of the programmed time an
audible signal is sounded. The timer display
flashes. By touching any symbol on the display the
audible signal is switched off.
• The timer can be switched off at any time
by touching the timer symbol and then the
UP-/DOWN-symbols simultaneously.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
The cooktop’s electronic circuitry features overheating
protection. If the critical temperature is exceeded,
the right front and back cooking zones are switched
back to level 7 provided they are set to level 8 or 9.
Overheating protection
H and 7 alternately appear in the relevant cooking
level display areas.
When the temperature drops below the critial
value, the letter H disappear from the display. The
cooking zones remain on level 7 and can be turned
up to level 8 or 9 again if required.
The appliance is set to automatically switch off a
cooking zone 4 hours after the last operation.
The cooking zone can be switched on again as
normal.
Holiday safeguard
(Automatic switch-off)
Switching on the child lock
Child lock
It is possible to avoid switching on the appliance
accidentally by using the child lock.
Note: the child lock function is de-activated when
delivered and must be chosen in the options menu.
(see page 23 options menu).
The appliance must be switched on by the main
switch and all cooking zones should be on 0.
• Touch the rear left cooking zone on the display
panel and keep the finger pressed.
• Simultaneously touch the main switch. An audible
signal is given. Remove the finger from the main
switch first and then the finger from the cooking
zone.
Child lock switched on
• The main switch symbol flashes. The cooktop can
now not be switched on. The timer, however, is
still operational.
Switching off the child lock
• Touch the rear left cooking zone on the display
panel and keep the finger pressed.
• Simultaneously touch the main switch. An audible
signal is given. Remove the finger from the main
switch first and then the finger from the cooking
zone.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Options menu
Using the options menu, the automatic quick-boil
function, cooking zone extension and the child lock
can be programmed to suit your individual needs.
Use the symbols UP and DOWN to access the
options menu and chose the required values.
Use the symbol timer to store the required value.
Use the symbol + to go through the options menu.
Use the main switch symbol to exit the options
menu at any time. Values which have not been
confirmed will not be stored.
Note: the options menu will automatically end
without storing any values, should you stop
operating it for more than 2 minutes.
Options menu,
setting the automatic quick-boil time
Options menu, setting the automatic
quick-boil time
Proceed as follows:
• Switch on the appliance by touching the main
switch. (Note: the timer should not be activated
and all cooking zones should be on 0.)
• Touch symbols UP and DOWN when the cooktop
is switched on. You will hear a signal. Keep your
fingers pressed down until a second signal sounds
after a few seconds and P1 lights on the timer
display panel. Remove fingers immediately. A 04
appears on the cooking zone display panel, i.e. a
quick boil time of 4 minutes is stored.
• You can now touch symbols UP or DOWN and
select a quick boil time from 1 to 15 minutes. The
selected quick boil time applies to all cooking
zones. The selected time (A 01 to A15) is shown
on the cooking zone display panel and P1 flashes
(requesting to store values).
• Store the required option by touching the timer
symbol You will hear a signal and P1 lights
.
constantly.
In order to exit the options menu touch the main
switch. Values which have not been confirmed will
not be stored.
Should you require to program further functions,
touch the symbol +.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Options menu, setting the combination feature
front left cooking zone
• P2 flashes on the timer display panel. The symbol
for combination feature flashes on the display of
the front left cooking zone.
Options menu, setting the combination
feature front left cooking zone
By repeatedly touching the cooking zone in the
display panel you can choose four options:
• the symbol for combination feature flashes:
every time the cooking range is switched on the
combination feature has to be activated if
desired.
• the symbol for the middle combination feature
lights:
every time the cooking range is switched on the
middle combination feature is activated,
however can be de-activated if desired.
• the symbol for the large combination feature
lights:
every time the cooking range is switched on the
large combination feature is activated, however
can be de-activated if desired.
• the symbol for the large combination feature
lights and appears on the cooking zone
display:
when the cooking range is switched on the
previously used option is activated.
• After choosing the required option P2 flashes
(requesting to store values).
• Store the required option by touching the timer
symbol
P2 lights
. You will hear a signal and
constantly
In order to exit the options menu touch the main
switch. Values which have not been confirmed will
not be stored.
Should you require to program further functions,
touch the symbol +.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Options menu, setting the combination feature
rear cooking zones
• P3 flashes on the timer display panel. The symbol
for combination feature flashes on the display of
the rear cooking zones.
Options menu, setting the combination
feature rear cooking zones
By repeatedly touching one of the rear cooking
zones in the display panel you can choose three
options:
• the symbol for combination feature flashes:
every time the cooking range is switched on the
combination feature must be activated if
desired.
• the symbol for the combination feature lights:
every time the cooking range is switched on the
combination feature is activated, however can
be de-activated if desired.
• the symbol for the large combination feature
lights and appears on the cooking zone
display:
when the cooking range is switched on the
previously used option is activated.
• After choosing the required option P3 flashes
(requesting to store values).
• Store the required option by touching the timer
symbol
P3 lights
. You will hear a signal and
constantly.
In order to exit the options menu touch the main
switch. Values which have not been confirmed will
not be stored.
Should you require to program further functions,
touch the symbol +.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Options menu, setting the child lock
• P4 flashes on the timer display panel. The symbol
for child lock flashes on the display of the rear left
cooking zone. The child lock cannot be switched
on with this setting.
Options menu, setting the child lock
• Touch the cooking zone rear left. A spot appears
next to the child lock symbol. The child lock can
be switched on with this setting if required. P4
flashes (requesting to store values).
• Store the required option by touching the timer
symbol
P4 lights
. You will hear a signal and
constantly.
In order to exit the options menu touch the main
switch. Values that have not been confirmed will not
be stored.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Cleaning and care
Iridiscent discoloration can be caused by the bases
of some pots. These do not interfere with the
operation of the glass ceramic cooktop.
Note: to avoid jeopardising the electrical safety of
the appliance, do not use high-pressure or steam
jet cleaning devices – risk of short circuits!
Please refer to the enclosed brochure for further
notes on cleaning.
Caution, risk of burns! Before cleaning, please
wait until the cooktop has cooled to hand-
warm.
You can order our blade scraper (Order No.
087670) and the Gaggenau glass ceramic cleaner
(Order No. 098690) from your Gaggenau dealer.
Please thoroughly clean the appliance before
operating it for the first time and after every use.
The frame of the cooktop should be cleaned
using a soft, damp cloth and light soapy liquid or a
commercially available stainless steel cleaner.
Immediately remove food remains and burnt-in
residues with the blade scraper. The blade is very
sharp. Risk of injury! Only use the blade on the
glass-ceramic cooktop. Do not use the blade casing
as it may scratch the glass-ceramic.
Clean the cooktop with a damp, soft cloth or kitchen
paper and the Gaggenau glass ceramic cleaner or
similar cleaner suitable for glass ceramic cooktops.
Polish with a soft, dry cloth.
The Gaggenau glass ceramic cleaner will coat the
glass ceramic cooktop with a gleaming, dirt
repellent film. This will help to preserve the
attractive appearance of your cooktop over a long
period of time and make it easier to clean as well.
Do not apply the cleaner while the cooktop is still
hot as this may cause stains. Do not use scouring
agents, abrasives or chemically aggressive
cleaners (for example oven cleaner)! Do not use
any nitro polishing agents for cleaning! Do not use
any abrasive sponges either.
Food with a high sugar content (e.g. boiled-over
milk, jam) can damage the surface of your cooktop.
Immediately remove such food using the glass
scraper.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Maintenance
The appliance must be disconnected from the
power supply during all repair work.
If the appliance does not function correctly, check
the fuses first.
If the power supply is functioning correctly, but your
appliance still does not work, please contact your
Gaggenau dealer who will provide you with the
address and telephone number of your nearest
manufacturer’s authorized service agent or contact
Gaggenau USA on (800) 828-9165. Specify the
appliance type (see rating plate).
Repairs may only be carried out by authorised
technicians, in order to guarantee the safety of the
appliance.
Unauthorised tampering with the appliance will
invalidate any warranty claims.
Only ever use original spare parts.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Remedying slight malfunctions yourself
Not every malfunction can be ascribed to a defect
If you are not successful in remedying the fault with
of your cooker. If your appliance should not function the aid of the list below, then contact your
properly, search for the fault in the list below.
Gaggenau after-sales service.
Fault
The appliance cannot be
switched on.
Possible cause
Remedy
Check the domestic fuse.
Remove objects.
No electricity.
Objects lie on the control panel.
The appliance cannot be
switched on, the main
switch symbol blinks.
The child lock is switched on.
Switch off the child lock.
Both right cooking zones
are switched back to level 7.
H blinks on the cooking level
display.
The overheating protection has
been triggered.
It is possible to use the
remaining cooking zones.
After cooling down the
complete cooktop can be
used once again.
A cooking zone switches off
after operating for a longer
period of time.
The holiday safeguard is set to
automatically switch off a cooking zone
4 hours after the last operation.
Switch the cooking zone on
again as usual.
No reaction from the cooktop. Extremely excessive voltage in the
mains, e.g. caused by lightning.
Isolate the appliance from
the for 30 sec by switching
off the domestic fuse.
Clean control panel. Always
keep the control panel clean.
Touch the main switch again.
Control panel is soiled.
The main switch was not touched
long enough.
The display panel lights, a
spot lights constantly on
the timer display panel,
however the cooking zone
does not heat up.
The appliance is on
show room mode.
Disconnect the appliance
from the power supply.
Reconnect the appliance and
within 3 minutes carry out the
following procedure: Touch
the + symbol and keep the
finger pressed down. Touch
the main switch until you
hear a signal. Immediately
remove your finger from the
main switch and then release
the + symbol.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Installation
Electrical connection
Technical Data
The appliance must only be connected by an
authorised specialist.
Total connected load: 8680 W
All corresponding regulations must be observed.
Important notes on installation
Pay attention to the "Important notes" on page
3 and 4.
Pay attention to the data on the rating plate. The
appliance must be properly grounded. Connect the
connecting cable to the mains.
The appliance must only be connected by an
authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.
When connecting electrical appliances in the
proximity of cooking surfaces, make sure that
connecting cables do not come into contact with hot
cooking surfaces.
The installation technician is responsible for the
correct functioning of the appliance at the place of
installation. He must instruct the user on how to
disconnect the appliance from electricity in an
emergency.
This appliance may be installed in kitchen
combinations made of wood or similar combustible
materials without taking additional measures.
The built-in furniture and worktop where the
appliance is installed must be heat resistant up to
temperatures of 200° F/90° C.
If the range is not installed over a built-in cooker,
protection against hazardous contact from below
must be ensured after assembly, e.g. by installing
an intermediate shelf that can only be detached
using a tool. The distance between the
intermediate shelf and the worktop in which the
range is recessed must be at least 60 mm (23/8 ).
There must be a gap of at least 20 mm ( 3⁄4 ) at each
side between the appliance and any flammable
walls or furnishings.
If all poles of the appliances cannot be isolated
from the mains by removing an accessible plug, an
isolating device with a contact gap of at least 3 mm
must be installed (e.g. domestic fuse).
No warranty claims can be lodged for any
damage resulting from failure to observe these
instructions.
Subject to technical change without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
The minimum spaces that must be maintained
between the appliance cooking surface and the
horizontal surface above the cooking top shall be:
A = 30 inches (762 mm) minimum clearance
between the top of the cooking surface and the
bottom of an unprotected wood or metal cabinet; or
A = 24 inches (600 mm) minimum when bottom of
wood or metal cabinet is protected by no less than
1/4-inch-thick flame-retardant millboard covered
with no less than No. 28 MSG sheet steel,
2
A
4
1
0.015-inch-thick stainless steel, 0.024-inch-thick
aluminimum, or 0.020-inch-thick copper.
3
If an electrically heated warming tray is provided
on the back guard of a counter level range, the
dimension shall be A = 30 inches (762 mm).
5
WARNING
If installing between two parallel side walls or
cabinets, the wall or cabinets should be spaced at
least 4 inches (100 mm) apart to reduce the risk of
ignition of surrounding combustible materials.
1 Building back wall
2 Top building cabinet
3 Cooking surface
4 Building side wall
5 Building side wall
28
Download from Www.Somanuals.com. All Manuals Search And Download.
The appliance is installed in a base cabinet with a
width of more than 900 mm (35 7/16 ).
Installation
1
8''
/
201
(520)
311
2''
2''
)
/
/
• Produce the recess for the cooktop in your
worktop. Proceed as indicated on the installation
sketch.
(3)
1
4''
/
1
800
(
(31)
3
6''
6)
11
1
/
Note: the cooktop must not be stuck onto the
(4
worktop with silicone.
7
8''
/
16''
)
7
min.13
(min. 3
/
• Insert the cooktop with the control panel front
right into the cut-out and align it.
(200)
0
16'' ±3
9
/
32
19 5
2,5
/
)
0±
• Secure the appliance on the worktop with the
clamping screws included. Fasten the clamping
screws as marked by the black arrows in the
picture. The dotted arrows show alternative fixing
points if required by the installation conditions.
(4
32'' ±3
/
2
3
3023
''
/
)
,5
2
0±
min. 2
)
0
8
(7
(min. 5
16''
. 39
in
(min. 90)
/
m
Note:
During installation be careful that the front right
clamping screw is fitted to the worktop front side, as
fitting the clamping screw to the side can damage
the appliance base. Do not tighten the clamping
screws too tightly, as a uniform sealing gap should
be left all round.
• Connect the appliance to the electricity.
Check the appliance works correctly.
Removal of the cooktop
Disconnect the appliance from the electricity. Undo
all the clamping screws. Carefully push out the
appliance by the metal base from below.
Note:
Do not try to lever the cooktop out of the worktop
cut out using a tool.
worktop
front
5080006411 en 01.03 EB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
GAGGENAU HAUSGERÄTE GMBH
CARL-WERY-STR. 34 · 81739 MÜNCHEN
GERMANY
5551 McFADDEN AVENUE
HUNTINGTON BEACH, CA 92649
USA
Y (089) 45 90-03
Y (800) 828-9165 · FAX (714) 901-0979
FAX (089) 45 90-23 47
Download from Www.Somanuals.com. All Manuals Search And Download.
|