Fujitsu Laptop A512 User Manual

Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Travelling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Notebook: transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Mains adapter connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching on the device for the ﬁrst time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Switching on the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Notebook: switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Separate number block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Moving the pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting an item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Executing commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Dragging items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Switching the Touchpad on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Handling data carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

CD/DVD indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Inserting or removing a data carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Manual removal (emergency removal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Using the power-management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Inserting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Removing the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Loudspeakers and microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wireless LAN/Bluetooth radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Conﬁguring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Protecting BIOS Setup Utility (supervisor and user password) . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Password protection for booting of the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Connecting external audio devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Microphone port/Line In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Headphone port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Installing and removing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Removing the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Removing memory modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Securing the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Removing and installing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Removing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Installing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Operating BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 58

Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . 58

Load Setup Defaults – Copy Standard Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Discard Changes – Discard changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . 58

Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 58

Save Changes and Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Restoring the hard disk contents under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

The LCD screen is difﬁcult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

The notebook cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

The radio connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Acoustic warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

LIFEBOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Power adapter, 65 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Regulatory information for notebooks without radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

FCC regulatory information for notebooks with radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Innovative technology

... and ergonomic design make your device a reliable and convenient companion.

The device boots very quickly, is ready for immediate use and offers a particularly

long operating time because of its high capacity battery.

With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better

protect your system against unauthorised access by using the powerful password properties.

Information on the connections and user components of your notebook

can be found in "Ports and controls", Page 9.

Further information

The Windows drivers for your device can be found on our Internet site.

The factory installation of your device does not support any other operating

system. Fujitsu Technology Solutions accepts no liability whatsoever

if any other operating system is used.

Software oriented components of these instructions refer to Microsoft products,

if they come within the scope of the delivery.

If you install other software products, pay attention to the operating

instructions of the manufacturer.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Innovative technology

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe

these warnings could pose a risk to health, damage the device or lead

to loss of data. The warranty will be invalidated if the device becomes

defective through failure to observe these warnings.

Indicates important information for the proper use of the device.

►

Indicates an activity that must be performed

Indicates a result



This font

indicates data entered using the keyboard in a program dialogue or at

the command line, e.g. your password (Name123) or a command used to

start a program (start.exe)

This font

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

This font

indicates

•

terms and texts used in a software interface, e.g.: Click on Save

names of programs or ﬁles, e.g. Windows or setup.exe.

"This font"

indicates

•

cross-references to another section, e.g. "Safety information"

cross-references to an external source, e.g. a web address: For more

information, go to "http://www.fujitsu.com/fts/"

•

Names of CDs, DVDs and titles or designations for other materials,

e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual

Key

F10

indicates a key on the keyboard, e.g:

This font

indicates terms and texts that are emphasised or highlighted, e.g.: Do

not switch off the device

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

This chapter presents the individual hardware components of your device. It gives an

overview of the indicators and connections of the device. Please familiarise yourself with

these components before you start to work with the device.

Front

= WebCam

= Memory card slot

= Touchpad buttons

= Microphone jack

= WebCam status indicator

= Microphone

= ON/OFF switch

= Loudspeakers

= Touchpad

10 = Headphone port

11 = Status indicators

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

Left panel

= VGA monitor port

= LAN port

= ExpressCard slot

= USB port

= HDMI port

= USB port with charging function

Right-hand side

= USB port

= Eject button for optical drive

= DC input connector (DC IN)

= Kensington Lock

= Optical drive

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

Underside

= Memory service compartment

= Hard disk service compartment

= Battery release

= Battery compartment

= Battery release

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

INoteosrtantnotes

This chapter contains essential safety information which must be followed

when working with your notebook. Other notes also provide useful information

which will help you with your notebook.

Safety notes

SNaoftetsynotes

Please follow the safety notes provided in the "Safety/Regulations" manual

as well as the safety notes given below.

Please pay special attention to the sections in the manual marked

with the symbol on the left.

When connecting and disconnecting cables, observe the relevant

notes in this operating manual.

Read the information on the ambient conditions in the "T e chnical data",

Page 66 and "First-time setup of your device", Page 15 before preparing your

notebook for use and switching it on for the ﬁrst time.

When cleaning the device, please observe the relevant notes in the

section "Cleaning the notebook", Page 14.

Pay attention to the additional safety notes for devices with radio components

provided in the "Safety/Regulations" manual.

Please refer to the notes in the chapter "Removing and installing

components during servicing", Page 49.

This notebook complies with the relevant safety regulations for data processing

equipment. If you have questions about using your notebook in a particular area,

please contact your sales outlet or our Hotline/Service Desk.

Additional safety notes for devices with

radio components

RWBlauir

eitoleosoosthmL,ApsaoNfn:eetynnt:otes

If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your notebook, you

must be sure to observe the following safety notes when using your notebook:

•

Switch off the radio components when you are in an aircraft or driving in a car.

Switch off the radio components when you are in a hospital, an operating room or near a medical

electronics system. The transmitted radio waves can impair the operation of medical devices.

•

Switch off the radio components when you let the device get near ﬂammable

gases or into hazardous environments (e.g. petrol station, paintshops), as the

transmitted radio waves can cause an explosion or a ﬁre.

For information on how to switch radio components on and off, see chapter

"Switching the wireless components on and off", Page 39.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

Energy saving

NEnoetersgysaving

Switch the notebook off when it is not in use. Switch off external, connected devices if you

are not using them. If you use the energy saving functions, the notebook uses less energy.

You will then be able to work for longer before having to recharge the battery.

Energy efﬁciency is increased and the environmental impact is reduced.

You save money while protecting the environment.

Energy saving under Windows

►

Make use of the power management features (see "Using the power-management features",

Page 34).

Travelling with your notebook

MTN

bneissble

prktartaiotnion

Please observe the points listed below when travelling with your notebook.

Before you travel

►

Back up important data stored on your hard disk.

NTr

,noktebook

Switch off the radio component for data security reasons. With data trafﬁc via a wireless

connection, it is also possible for unauthorised third parties to receive data.

Information on activating data encryption is provided in the documentation

for your radio component.

►

If you wish to use your notebook during a ﬂight, ﬁrst check with the ﬂight

attendants if it is OK to do so.

When travelling in other countries

►

If you are travelling abroad, check that the mains adapter can be operated with the

local mains voltage. If this is not the case, obtain the appropriate mains adapter for

your notebook. Do not use any other voltage converter!

►

Check whether the local mains voltage and the power cable are compatible. If this is

not the case, buy a power cable that matches the local conditions.

Enquire with the corresponding government ofﬁce of the country you will be

travelling in as to whether you may operate the radio component integrated in

your notebook there (see also "CE marking", Page 68).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

Notebook: transporting

Protect the notebook from severe shocks and extreme temperatures

(e.g. direct sunlight in a car).

►

If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.

esb

oktation

Switch the notebook off.

Unplug the mains adapter and all external devices from the power socket.

Disconnect the mains adapter cable and the data cables for all external devices.

Close the LCD screen.

To protect against damaging jolts and bumps, use a notebook carrying

case to transport your notebook.

Cleaning the notebook

Do not clean any interior parts yourself; leave this job to a service technician.

Only use cleaning products designed for computers. Normal household

cleaners and polishes can damage the markings on the keyboard and the

device, the paintwork or the notebook itself.

Ensure that no liquid enters the notebook.

The LCD screen very sensitive to scratches. Only clean the display

surface with a very soft, slightly damp cloth.

►

Switch the notebook off.

NKTLCoCeroleyuyDtasecbtsnbhoacoipanlrVoagerkdienw

display

In order to prevent accidentially switching the device on, remove the power cable from the mains

adaptor and remove the battery (see "Removing and installing the battery", Page 29).

The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has

been moistened in mild domestic detergent and then carefully wrung out.



To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.

Ensure that no liquid enters the device.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

FGierstti-

tasretetup

Please read the chapter "Important notes", Page 12.

If your device is equipped with a Windows operating system, the necessary

hardware drivers and supplied software are already pre-installed.

Before you switch on the device for the ﬁrst time, connect it to the mains voltage

using the mains adapter, see "Mains adapter connecting", Page 16. The mains

adapter must be connected during the entire installation process.

A system test is performed when your device is ﬁrst switched on. Various messages

can appear. The display may remain dark for a short time or may ﬂicker.

Please follow the instructions on the screen.

NEVER switch off your device during the ﬁrst-time setup process.

On delivery, the battery can be found in the battery compartment or in the accessories kit.

The battery must be charged if you want to operate your device using the battery.

When used on the move, the built-in battery provides the device with the necessary power. You

can increase the operating time by using the available energy-saving functions.

For instructions on how to connect external devices (e.g. mouse, printer) to your

device, please refer to the operating manual for your device.

Unpacking and checking the device

Should you discover any damage that occurred during transportation,

notify your local sales outlet immediately!

►

Unpack all the individual parts.

PTra

oinrt

Check your device for any visible damage which may have occurred during transportation.

You may need the packaging in the future, if you need to transport your device.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

Selecting a location

SDM

alvie

etain

tocration

Select a suitable location for the device before setting it up. Follow

the instructions below when doing so:

•

Never place the device or the mains adapter on a heat-sensitive surface.

The surface could be damaged as a result.

Never place the device on a soft surface (e.g. carpeting, upholstered furniture,

bed). This can block the air vents and cause overheating and damage.

The underside of the device heats up during normal operation. Prolonged contact

with the skin may become unpleasant or even result in burns.

Place the device on a stable, ﬂat, non-slippery surface. Please note that the

rubber feet of the device may mark certain types of delicate surfaces.

Keep other objects at least 100 mm away from the device and its

mains adapter to ensure adequate ventilation.

•

Never cover the ventilation slots of the device.

Do not expose the device to extreme environmental conditions. Protect

the device from dust, humidity, and heat.

Mains adapter connecting

PMaipnasraindgapfoterorperation

Observe the safety notes in the enclosed "Safety/Regulations" manual.

The supplied power cable conforms to the requirements of the country in

which you purchased your device. Make sure that the power cable is approved

for use in the country in which you intend to use it.

►

Connect the power cable (1) to the

mains adapter.

►

Plug the mains cable (2) into a mains outlet.

Connect the mains adapter cable (3) to

the DC jack (DC IN) of the device.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

Switching on the device for the ﬁrst time

Switchingonfortheﬁrsttime

When you switch on the device for the ﬁrst time, the supplied software is

installed and conﬁgured. Because this procedure must not be interrupted,

you should set aside enough time for it to be fully completed and connect

the device to the mains using the mains adapter.

During the installation process, DO NOT restart the device unless

you are requested to do so!

To make it easier to use your device for the ﬁrst time, the operating system

is pre-installed on the hard disk.

►

Switch on your device.

►

During installation, follow the instructions on screen.

If a Windows operating system is installed on your device, you will ﬁnd more

information on the system and drivers, help programmes, updates, manuals etc.

on the device or on the Internet at "http://ts.fujitsu.com/support".

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Notebook,operation

This chapter describes the basics for operating your notebook. Please read the chapter

entitled "Connecting external devices", Page 45 for instructions on how to connect

devices such as a mouse and a printer to the notebook.

Please refer to the notes in "Important notes", Page 12.

Status indicators

Statusindicators

The status indicators provide information about the status of the power supply,

the drives and the keyboard functions.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Status indicators

Description

Wireless components indicator

•

The indicator is lit: The wireless components are switched on.

•

The indicator is not lit: The wireless components are switched off.

Power-on indicator/Standby

SPto

inydinicdictoartor

•

The indicator is lit: The notebook is switched on.

The indicator ﬂashes: The notebook is in standby mode.

The indicator is not lit: The notebook is switched off.

Battery charging indicator/power connector

The state of charge of the battery is shown by the battery indicator.

With mains adapter connected:

•

The indicator lights up blue: The battery is fully charged.

The indicator ﬂashes orange: The state of charge of the battery is

less than 12%.

•

Indicator ﬂashes purple: a fault has occurred. The battery cannot be

recharged.

•

The indicator is off: The system is in battery mode and the mains

adapter is not connected or the battery is not installed.

Batterysinytdaitcuasotionl rdicator

Drive indicator

DIn

divicator

The indicator is lit: One of the drives (e.g. hard disk, CD/DVD) is being

accessed.

Num Lock indicator

icaLtocrk

Num

The indicator is lit: The

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper

right of the keys.

Caps Lock indicator

icsLtocr k

The indicator is lit: The Caps Lock key has been pressed. All the characters

you type will appear in upper case. In the case of overlay keys, the

character printed on the upper left of the key will appear when that key

is pressed.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Switching on the notebook

►

Open the LCD screen.

Switchingon

►

Press the ON/OFF switch for about one

second to switch the notebook on.

The power-on indicator is lit.



Notebook: switching off

Back up your data and close all applications before you switch off your

device. Otherwise data might be lost.

►

Shut down the operating system properly

(e.g. from the Windows Start menu by

clicking on Start - Shut Down - OK).

Notebook

If the notebook is not switched off

automatically, press the ON/OFF switch

for approx. ﬁve seconds.

►

Close the LCD screen.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Keyboard

KNBeuytmboonasicrdkeypad

The keyboard of your notebook is subject to continuous wear through normal

use. The key markings are especially prone to wear. The key markings are

liable to wear away over the life of the notebook.

The keyboard has been designed to provide all the functions of an enhanced keyboard.

Some enhanced keyboard functions are mapped with key combinations.

The following description of keys refers to Windows. Additional functions supported by the keys

are described in the relevant manuals supplied with your application programs.

The ﬁgure below shows how to access the different characters on keys with overlaid functions.

The example applies when the Caps Lock key has not been activated.

The illustrations shown below may differ from your actual device.

Num

}

Alt Gr

}

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Key

Description

Backspace key

The Backspace key deletes the character to the left of the cursor.

Backspace

Tab key

The Tab key moves the cursor to the next tab stop.

Tabkey

Enter key (return)

The Enter key terminates a command line. The command you have entered

is executed when you press this key.

RELinen

Caps Lock key

The Caps Lock key activates the Caps Lock mode, and the corresponding

icon is displayed in the Windows information area. In Caps Lock mode, all

of the characters you type appear in upper case. In the case of overlay

keys, the character printed on the upper left of the key will appear when

that key is pressed. To cancel the Caps Lock function, simply press the

Caps Lock key again.

SChaipft

ock

Shift key

The Shift key causes uppercase characters to appear. In the case of overlay

keys, the character printed on the upper left of the key appears when that

key is pressed.

Shiftkey

Fn button

The

key enables the special functions indicated on overlay keys (see

"Key combinations", Page 23).

Fnkey

Cursor keys

The cursor keys move the cursor in the direction of the arrow, i.e. up, down,

left, or right.

Cursorkcoenystrolkeys

Start key

The Start key opens the Windows Start menu.

Startkey

Menu key

The Menu key invokes the menu for the marked item.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Separate number block

SNeupm

eLrraoitc

uympadrickeypad

The keyboard of your notebook has a separate number block on the far right.

Key combinations

Keycombinations

The following description of key combinations applies to Windows operating systems. Some of the

following key combinations may not function in other operating systems or with certain device drivers.

Other key combinations are described in the relevant manuals supplied

with your application programs.

Key combinations are entered as follows:

►

Press the ﬁrst key in the combination and keep it pressed.

While holding the ﬁrst key down, press the other key or keys in the combination.

Combination

Description

Switching the loudspeakers on and off

This key combination switches your notebook’s loudspeakers off

and on.

FLonu+

speakers

Switching the touchpad and touchpad buttons on/off

This key combination switches the touchpad and the touchpad

buttons on or off.

+chpadbuttons

Switching the wireless components on / off

This key combination switches the wireless components off or on.

FWnir+eFle5sscomponents

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Combination

Description

Decrease screen brightness

This key combination decreases the brightness of the screen.

FLSCncr+

ightness

Increase screen brightness

This key combination increases the brightness of the screen.

FSncr+ enbrightness

Decrease volume

This key combination reduces the volume of the internal

loudspeakers.

FVonl+

Increase volume

This key combination increases the volume of the internal

loudspeakers.

FVonl+

Toggle output screen

Use this key combination to select which screen(s) is/are used for

display if an external monitor is connected.

Screen output is possible:

•

only on the notebook’s LCD screen

on the LCD screen of the notebook and the external monitor

at the same time

•

only on the external monitor

This setting is useful if you would like a high resolution and a

high refresh rate on an external monitor.

FTong+gFl1e0o utputscreen

Power management functions

Use this key combination to activate the power management

functions (see chapter "Using the power-management features",

Page 34).

FEn+erF ysavingfunctions

Switch between open applications

Use this key combination to switch between several open

applications.

Alt+Tab

Windows security/Task-Manager

This key combination opens the Windows security/Task-Manager

Del

Ctrl

Alt

SysRq

window.

Ctrl+Alt+Del

Back tab

This key combination moves the cursor back to the previous tab

stop.

SBahcifkt tabab

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Key combinations using the Windows keys are detailed in the manual

for your operating system.

Country and keyboard settings

If you want to change the country and keyboard settings, proceed as follows:

►

Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options.

Touchpad and touchpad buttons

Keep the touchpad clean. Protect it from dirt, liquids and grease.

Touchpad

Do not use the touchpad if your ﬁngers are dirty.

Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.

1 = Touchpad

2 = Touchpad buttons

The touchpad enables you to move the mouse pointer on the screen.

The touchpad buttons allow you to select and execute commands. They correspond

to the buttons on a conventional mouse.

You can use a key combination to disable the touchpad, to avoid accidentally moving

the pointer on the screen (see also "Key combinations", Page 23).

Moving the pointer

►

Move your ﬁnger on the touchpad.

Touchpad

The pointer will move.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Selecting an item

►



Move the pointer to the item you wish to select.

Touchpad

Tap the touchpad once or press the left button once.

The item is selected.

Executing commands

►



Move the pointer to the ﬁeld you wish to select.

Touchpad

Tap the touchpad twice or press the left button twice.

The command is executed.

Dragging items

►

Select the desired item.

Touchpad

Press and hold the left button and drag the item to the desired position

with the ﬁnger on the touchpad.

The item will be moved.



Switching the Touchpad on and off

You can switch the Touchpad on and off using a key combination,

see "Key combinations", Page 23.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

LCD screen

LNCoDtescreen

High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For

technical reasons, TFT monitors are manufactured for a speciﬁc resolution. An optimal, clear

picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A

monitor resolution which differs from the speciﬁcation can result in an unclear picture.

The screen resolution of the LCD monitor of your notebook is optimally set at the factory.

The standard of production techniques today cannot guarantee an absolutely fault-free screen

display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum

permitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II).

Example:

A monitor with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of

three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to

ISO 9241-3 (class II), a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark

subpixels or a corresponding mix may be defective (1 light subpixel counts as 2 dark subpixels).

Pixel

A pixel consists of 3 subpixels, normally red, green and

blue. A pixel is the smallest element that can be generated

by complete functionality of the display.

Subpixel

Cluster

A subpixel is a separately addressable internal structure

within a pixel that enhances the pixel function.

A cluster contains two or more defective pixels or

subpixels in a 5 x 5 pixel block.

Background lighting

TFT monitors are operated with background lighting. The luminosity of the background

lighting can decrease during the period of use of the notebook. However, you can

set the brightness of your monitor individually.

Synchronising the display on the LCD screen and an external monitor

For more information, please refer to the chapter "Key combinations", Page 23

under "Display output, switch between".

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Webcam

Depending on the software used, you can use your Webcam to take pictures,

record video clips or take part in web chats.

The WebCam has its own status indicator. The indicator lights up when the WebCam is switched on.

•

The picture quality depends on the lighting conditions and the software being used.

You can only operate the webcam with a particular application (e.g. an Internet telephony

program or a video conferencing program which supports a webcam).

•

When using the webcam the notebook support must not wobble.

The webcam automatically adjusts itself to the current light level. For this reason

the LCD screen may ﬂicker while the light level is adjusted.

Further information on using the webcam and on the additional settings

which are possible for your webcam can be found in the help function

of the program which uses the webcam.

If you wish to perform a function test on your WebCam, you can make use of the

corresponding test software provided at "http://www.fujitsu.com/fts/support/index.html".

Rechargeable battery

BLRiaefetctehraayrtgteerayblebattery

When not plugged into a mains socket, the notebook runs on its built-in battery. You

can increase the life of the battery by caring for the battery properly. The average

battery life is around 500 charge/discharge cycles.

You can extend the battery life by taking advantage of the available energy saving functions.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Charging, caring for and maintaining the battery

Battery

The notebook battery can only be charged, when the ambient temperature

is between 5°C and max. 35°C.

You can charge the battery by connecting the notebook to the mains adapter

(see "Mains adapter connecting", Page 16).

If the battery is running low you will hear a warning alarm. If you do not connect the mains adapter

within ﬁve minutes of the warning alarm described above, your notebook will automatically switch off.

monitoring the battery charging level

Batterystatusmeter

Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When

you place the mouse pointer on the battery symbol, the system displays the battery status.

Battery storage

BSCeahltaft-erdgriyi

bitya

tbte

rttery

Keep the battery pack between 0°C and +30°C. The lower the temperature at which

the batteries are stored, the lower the rate of self-discharge.

If you will be storing batteries for a longer period (longer than two months),

the battery charge level should be approx. 30 %. To prevent exhaustive

discharge which would permanently damage the battery, check the level

of charge of the battery at regular intervals.

To be able to make use of the optimal charging capacity of the batteries, the battery

should be completely discharged and then fully recharged.

If you do not use the batteries for long periods, remove them from the

notebook. Never store the batteries in the device.

Removing and installing the battery

Only use rechargeable batteries approved by Fujitsu Technology

Solutions for your notebook.

Never use force when ﬁtting or removing a battery.

Make sure that no foreign bodies get into the battery connections.

Never store a battery for longer periods in the discharged state. This

can make it impossible to recharge.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing the battery

►

Prepare for removal, see chapter "Preparing to remove components", Page 50.

►

Slide the release button in the direction of the arrow (1) and hold it in place.

Slide the release button in direction of the arrow (2).

Remove the battery from the battery compartment (3).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Inserting battery

►

Position the battery at the edge.

Insert the battery into the battery compartment until it engages positively (1).

Slide the release button in the direction of the arrow (2).

Complete the removal, see chapter "Finishing component removal", Page 56.

Optical drive

Opticaldrive

This product contains a light emitting diode, classiﬁcation according to IEC 60825

1:2007: LASER CLASS 1, and must therefore not be opened.

Handling data carriers

Handling

Observe the following guidelines when handling data carriers:

•

Avoid touching the surface of a data carrier. Only handle data carriers by their edges.

Always store data carriers in their cases. This will protect the data carrier against

being covered in dust, scratched or damaged in any other way.

•

Protect your data carriers against dust, mechanical vibrations and direct sunlight.

Avoid storing a data carrier in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm data carriers in the optical drive.

When using a data carrier of lesser quality, vibrations and reading errors may occur.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

CD/DVD indicator

CD/DVDindicator

The CD/DVD indicator ﬂashes when a data carrier is inserted. The indicator goes out when

the drive is ready for reading. The indicator lights up when the drive is being accessed.

You may only remove the data carrier when the indicator is unlit.

If the CD/DVD indicator does not go out after a data carrier has been inserted, but

instead continues to ﬂash, this means that the drive cannot access the data carrier.

Either the data carrier is damaged or dirty or you are using a data

carrier that the drive cannot read.

Inserting or removing a data carrier

IRnesmerotivnigng

The notebook must be switched on.

►

Push the insert/eject button (1).

The drive tray will open.



►

Gently pull the drive tray (2) completely out.

►

Place the data carrier in the drive tray with

the printed side facing upwards.

►

Remove a data carrier that has

been inserted.

Push in the drive tray until you

feel it lock into place.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Manual removal (emergency removal)

CMEmDan/e

rgVaelD

myorevmalo

adalotafd

traricarrrier

In the event of a power failure or damage to the drive, you can remove the data carrier manually.

►

Switch your notebook off.

Push a pen or a piece of wire (such as a

paperclip) ﬁrmly into the opening (1).

The drive tray is ejected. You can now pull

the drive tray (2) out of the drive.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Using the power-management features

PBoawtte

The notebook uses less power when the available power-management features are used. You

will then be able to work longer when using the battery before having to recharge it.

Power efﬁciency is increased and environmental pollution reduced. By

choosing the best power options, you can make signiﬁcant savings and

at the same time help protect the environment.

When you close the LCD screen, depending on the setting in Windows, the

notebook automatically enters a power saving mode.

We recommend the following settings:

Function

On external power

After 10 minutes

After 15 minutes

After 20 minutes

After 1 hour

On battery power

After 5 minutes

After 10 minutes

After 15 minutes

After 30 minutes

Turn off monitor

Turn off hard disk(s)

Energy saving (S3)

Hibernate mode (S4)

►

Select the power management functions in your Control Panel.

Select the Screen Saver in your Control Panel.

►

Right-click on the desktop. Switch on the screen saver by clicking Personalization –

Change screen saver.

If you need further information about an option, you can get help with most

settings by pressing

to open the Microsoft Help.

When the notebook is in power-saving mode, the following must be remembered:

During power saving mode, open ﬁles are held in the main memory

or in a swap ﬁle on the hard disk.

Never turn off your notebook while it is in a power saving mode. If the built-in battery is

nearly empty, close the open ﬁles and do not go into power saving mode.

If you do not intend to use your notebook for a long period of time:

►

Exit power saving mode if necessary via the mouse or keyboard or by switching on the

notebook.

Close all opened programs and completely shut down the notebook.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Observe the manufacturer’s instructions when handling the memory cards.

Memorycard

Supported formats

Your notebook supports the following formats:

•

SDHC

SDXC

Inserting the memory card

►

Carefully slide the memory card into the

slot. The label should be facing upward. Do

not apply excessive force, as otherwise the

delicate contact surfaces could be damaged.

Memorycard

Depending on the particular type

used, the memory card may protrude

slightly from the slot.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing the memory card

Memorycard

In order to protect your data, always follow the correct procedure

for removing the card outlined below.

You can stop the memory card via the corresponding icon in the task bar:

►



Left-click on the icon.

Select the card you want to stop and remove.

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the memory card.

►

Pull the memory card out of the slot.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

ExpressCards

SExloptressCard

An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54.

Consult the documentation supplied by the ExpressCard’s manufacturer

and follow the instructions provided.

Never use force when installing or removing an ExpressCard.

Make sure that no foreign objects enter the ExpressCard slot.

Inserting the card

Keep the placeholder for the slot in a safe place. When you remove the card again, you

must reinstall the place holder. This prevents foreign objects from getting into the slot.

►

Press the edge of the placeholder (1)

to make the card placeholder protrude

from the notebook’s case.

Pull the card placeholder out of the slot (2).

►

Insert the card into the slot guide with

the connection contacts ﬁrst.

Gently push the card into the slot until you

feel it click into place. Do not use any force.

Depending on the particular type used, the

card may protrude slightly from the slot.

Please see the documentation relating to the card for driver installation instructions.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing the card

Always remove the card according to the rules described below, to

ensure that none of your data is lost.

You can stop the ExpressCard using the corresponding symbol in the task bar:

►



Click on the symbol for safe removal of hardware with the left mouse button.

Select the ExpressCard you want to stop and remove.

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the ExpressCard.

►

Press the edge of the card (1) so that the

card protrudes a little from the notebook.

►

Pull the card out of the slot (2).

►

Insert the card placeholder into the

slot guide.

Gently slide the card placeholder into the

slot until you feel it click into place.

Loudspeakers and microphones

VMLBoaiculsurdsomslpopehuecodaonsknep

terraslker(subwoofer)

Information on the exact position of the speakers and microphone can be

found in "Ports and controls", Page 9.

Please refer to chapter "Key combinations", Page 23 for information on setting the volume

and also enabling/disabling the loudspeakers using key combinations.

If you attach an external microphone, the built-in microphone is disabled.

When you connect headphones or external speakers, the built-in speakers are disabled.

Information on connecting headphones and a microphone can be found

in "Connecting external devices", Page 45.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Wireless LAN/Bluetooth radio components

The installation of radio components not approved by Fujitsu Technology Solutions

will invalidate the certiﬁcations issued for this device.

Switching the wireless components on and off

to start the WirelessSelector.

►

Press the key combination

WBluiretloeossthLAN

The wireless component indicator will illuminate when one or more wireless

components are switched on.



The Bluetooth module and the wireless LAN transmission unit (antenna) will

be switched off when you switch off the radio components.

Pay attention to the additional safety notes for devices with wireless

components provided in the "Safety" manual.

Details on using a Wireless LAN can be found in the online help system

included in the Wireless LAN software.

Setting up WLAN access

•

Requirement: A WLAN must be available and you must have the

corresponding access information.

Information on conﬁguring the WLAN access can be found in the

documentation for your operating system.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Ethernet and LAN

EthernetLAN

The internal network module of your notebook supports Ethernet LAN. You can use it to

establish a connection to a local network (LAN = Local Area Network).

►

Connect the network cable to the LAN

port of the notebook (1).

►

Connect the network cable to your

network connection (2).

Your network administrator can help you to conﬁgure and use the LAN connections.

The network cable is not included in the delivery scope. This type of

cable can be obtained from a specialist dealer.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Securityfunctions

Your notebook has several security features that you can use to secure your

system from unauthorised access.

This chapter explains how to use each function, and what the beneﬁts are.

Please remember that in some cases, for example, forgetting your password,

you may be locked out and unable to access your data. Therefore,

please note the following information:

•

Make regular backups to external data carriers such as external hard

drives, CDs, DVDs or Blu-ray Discs.

•

Some security functions need you to choose passwords. Make a note

of the passwords and keep them in a safe place.

If you forget your passwords you will need to contact the our Service

Desk. Deletion or resetting of passwords is not covered by your warranty

and a charge will be made for assistance.

Using the Security Lock

Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You

can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook

from theft. The Kensington Lock Cable is available as an accessory.

Fujitsu Technology Solutions recommends the use of a combination lock.

►

Fit the Kensington Lock Cable to the

mechanism on your notebook.

USMAens

citcniu-

gtrh

ittehnyfe

tLcpKoa

ecl

bknt

cinktigotnonLockCable

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Conﬁguring password protection in BIOS Setup Utility

Before using the various options for password protection in the BIOS Setup utility

to increase data security, please observe the following:

Make a note of the passwords and keep them in a safe place. If you forget your

supervisor password you will not be able to access your notebook. Passwords are

not covered by your warranty and a charge will be made for assistance.

Passwordprotection

Your password can be up to eight characters long and contain letters and numbers.

No distinction is made between uppercase and lowercase.

Protecting BIOS Setup Utility (supervisor and user password)

If you have opened these operating instructions on the screen, we recommend that

you print out the following instructions. Because you cannot call the instructions

onto the screen while you are setting up the password.

BIOSSetupUtility

You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user

password. The supervisor password gives you access to all functions of the BIOS Setup

Utility, while the user password only provides some of the functions. You can only set a

user password if a supervisor password has already been assigned.

Please refer to the "Settings in BIOS Setup Utility", Page 57 section for a

description of how to call up and operate the BIOS Setup Utility.

Setting supervisor and user password

►

Start the BIOS Setup Utility and go to the Security menu.

Select the Set Supervisor Password ﬁeld and press the Enter key.

With Enter new Password: you are asked to enter a password.

Enter the password and press the Enter key.



►

Conﬁrm new Password requires you to conﬁrm the password.

Enter the password again and press the Enter key.



►

Changes have been saved is a conﬁrmation that the new password has been saved.



►

To set the user password, select Set User Password and proceed exactly as

when conﬁguring the supervisor password.

If you do not want to change any other settings, you can exit BIOS Setup Utility.

In the Exit menu, select the option Save Changes & Exit.

Select Yes and press the Enter key.



►

PSUuaspseserpwrva

srsdo

pardssword

The notebook will be rebooted and the new password will come into effect. It will now be

necessary to ﬁrst enter your supervisor or user password in order to open the BIOS Setup Utility.

Please note that the user password only provides access to a few of the BIOS settings.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Changing the supervisor or user password

You can only change the supervisor password when you have logged into the

BIOS Setup Utility with the supervisor password.

PSUausspeserpwrva

srsdo

rpordssword

►

Call the BIOS Setup Utility and go to the Security menu.

When changing the password, proceed exactly as for password assignment.

Removing passwords

To remove a password (without setting a new password) perform the following steps:

PSUausspeserpwrva

srsdo

rpordssword

►



Start the BIOS Setup Utility and go to the Security menu.

Highlight the Set Supervisor Password or Set User Password ﬁeld and press the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.

You will be requested to enter a new password by the Enter New Password prompt.

►



Press the Enter key twice.

In the Exit menu, select the option Save Changes & Exit.

Select Yes and press the Enter key.

The notebook will now reboot with the password removed.

Removing the supervisor password simultaneously deactivates the user password.

Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see

section "Setting supervisor and user password", Page 42), you can also

prevent booting of the operating system.

Operatingsystem

Activating system protection

►



Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

Select the Password on Boot option and press the Enter key.

Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key

Select the Save Changes & Exit option under Exit.

The notebook will reboot. You will be prompted to enter your password (the supervisor password).

Deactivating system protection

►

Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

Select the Password on Boot option and press the Enter key.

Select the Disabled option and press the Enter key.

If you do not want to change any other settings, you can exit BIOS Setup Utility.

Select the Save Changes & Exit option under Exit.



►

The notebook will reboot. The system is no longer password-protected.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Password protection for the hard disk

Passwordprotection:

The had disk password prevents unauthorised access to the hard disk drives

and is checked internally each time the system is booted. The condition for this

is that you have assigned at least the supervisor password.

Activating hard disk protection

►

Call up the BIOS Setup and select the Security menu.

If you have not assigned BIOS passwords yet, deﬁne the supervisor and the user

password now, if desired (see "Security functions", Page 41).



►

Mark the Hard Disk Security ﬁeld and press the Enter key.

In the Drive0 area mark the Set Master Password ﬁeld and press the Enter key.

Enter new Password then appears and you are asked to enter a password.

Enter the password and press the Enter key.



►

Conﬁrm new Password requires you to conﬁrm the password.

Enter the password again and press the Enter key.



►

Setup Notice: Changes have been saved is displayed to conﬁrm that the

new password has been saved.



►

To assign the password for the second hard disk (Drive1), go to the Drive1 area and

select the ﬁeld Set Master Password, then proceed in exactly the same way as for

setting up the password for the ﬁrst hard disk (Drive0).

The ﬁeld Password Entry on Boot is set to Enabled by default. You can exit the BIOS

Setup once you have ﬁnished changing the settings.



►



From the Exit menu, choose the option Exit Saving Changes.

Press the Enter key and select Yes.

The notebook reboots and your hard disk is now protected with a password. The system

will ask you to enter the password when the notebook is restarted again.

Deactivating hard disk protection

To cancel a password without setting a new one, proceed as follows:

►



Call up the BIOS Setup and select the Security menu.

Mark the Hard Disk Security ﬁeld and press the Enter key.

In the Drive0 area mark the Set Master Password ﬁeld and press the Enter key.

You will be initially requested to enter the old password by the Enter current Password prompt.

You will then be requested to enter a new password by the Enter new Password prompt.

►

After entering the password, press the Enter key three times.

From the Exit menu, choose the option Exit Saving Changes.

Press the Enter key and select Yes.

The notebook reboots, and password protection for the hard disk is cancelled.



►

To cancel the password for the second hard disk (Drive1), go to the Drive1 area

and select the ﬁeld Set Master Password, then proceed in exactly the same way as

for cancelling the password for the ﬁrst hard disk (Drive0).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Always refer to the safety information provided in "Important notes", Page 12 before

connecting or disconnecting any devices to or from your notebook.

Always read the documentation supplied with the device you wish to connect.

Never connect or disconnect cables during a thunderstorm.

Never pull at a cable when disconnecting it. Always grasp the plug.

Follow the steps below in order, when connecting or disconnecting

devices to your notebook:

With some devices such as USB devices, it is not necessary to switch off

the notebook and the device before connecting/disconnecting. For more

information about whether or not devices need to be switched off, please refer

to the documentation supplied with the external device.

Some of the external devices require special drivers (see the operating

system and external device documentation).

Connecting devices to the notebook

1. Turn off your notebook and all external devices.

2. Unplug your notebook and all devices from the mains sockets.

3. Connect the cables for your external devices following the instructions.

4. Plug all power cables into the mains sockets.

DPerviip

eraldevices

Disconnecting devices from the notebook

1. Turn off your notebook and all external devices.

2. Unplug your notebook and all devices from the mains sockets.

3. Disconnect the cables for your external devices following the instructions.

DPerviip

eraldevices

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting an external monitor

You can connect an external monitor to the analogue VGA monitor connection of the

notebook. Screen output is limited to a maximum of two screens at any one time (see

"Key combinations", Page 23, section "Toggle output screen").

VSMGc

rnAe

ectono

noerrtctionsocket

Analogue VGA monitor connection socket

►

Switch off the notebook and the external monitor.

Connect the data cable of the external monitor to the monitor port of the notebook.

First switch on the external monitor and then the notebook.

You can also use a key combination to switch back and forth between the external

monitor and the notebook’s LCD screen, see chapter "Key combinations", Page 23.

You can display the same picture on the external monitor and the

notebook LCD screen simultaneously.

HDMI port

HDMIport

The HDMI port on your notebook can be used to connect an external ampliﬁer,

LCD TV or a plasma TV with an HDMI connection.

►

Connect the data cable to the

external device.

►

Connect the data cable to the HDMI

port of the notebook.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting USB devices

USBports

On the USB ports, you can connect external devices that also have a USB port

(e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect

devices while your operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbit/s.

USB 2.0 has a data transfer rate of up to 480 Mbit/s.

USB 3.0 has a data transfer rate of up to 5 Gbit/s.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the

external device.

Connect the data cable to a USB

port of the notebook.

Device drivers

USB devices will be automatically recognised and installed by your operating system.

How to remove USB devices correctly

Always correctly remove the device according to the rules described below,

to ensure that none of your data is lost.

►



Left click on the icon to safely remove hardware, located in the taskbar.

Select the device which you want to shut down and remove.

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the device.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting external audio devices

Microphone port/Line In

vrtn

e,sc,o

netcintigng

The microphone port/Line In allows you to connect an external microphone, a MiniDisc

player, MP3 player, CD player or a tape deck to your notebook.

►

Connect the audio cable to the

external device.

►

Connect the audio cable to the microphone

port/Line In of the notebook.

Headphone port

ACuodnin

otrintsgahuedaid

icess

You can connect headphones or external loudspeakers to your notebook via the headphone port.

►



Connect the audio cable to the

external device.

Connect the audio cable to the headphone

port of the notebook.

The internal loudspeakers are disabled.

If you purchase a cable from a retailer, please note the following information:

The headphone port on your notebook is a "3.5 mm jack socket".

If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing and installing components

during servicing

Only qualiﬁed technicians should repair your notebook. Unauthorised

opening or incorrect repair may greatly endanger the user (electric shock,

ﬁre risk) and will invalidate your warranty.

Servicing

Components

After consulting the Hotline/Service Desk, you may remove and install the

components described in this chapter yourself.

If you remove and install components without consulting the Hotline/Service

Desk, then the warranty of your notebook will be voided.

Notes on installing and removing boards

and components

•

Switch the notebook off and pull the power plug out of the mains socket.

Always remove the battery.

Take care when you use the locking mechanisms on the battery and any other component.

Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.

NBEoSatDerds

Boards with electrostatic sensitive devices (ESD) are marked with the label

shown.

When handling boards ﬁtted with ESDs, you must always observe the following

points:

•

You must always discharge static build up (e.g. by touching a grounded

object) before working.

•

The equipment and tools you use must be free of static charges.

Remove the power plug from the mains supply before inserting or removing

boards containing ESDs.

•

Always hold boards with ESDs by their edges.

Never touch pins or conductors on boards ﬁtted with ESDs.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:

Please observe the safety information in chapter "Important notes", Page 12.

Remove the power plug from the mains outlet !

►

Switch the device off.

The device must not be in energy-saving mode !

►

Close the LCD screen.

Remove all the cables from the device.

Turn the device over and place it on a stable, ﬂat and clean surface. If necessary, lay an

anti-slip cloth on this surface to prevent the device from being scratched.

►

Remove the battery (see "Removing the battery", Page 30).

Installing and removing memory expansion

MRSyeea

minte

vreiyenmgxop

ardyenu

sleiorn

If you are asked by the Hotline/Service Desk to remove and install the memory

expansion yourself, proceed as follows:

Please observe the safety information in chapter "Important notes", Page 12.

When installing/removing memory modules, the battery must be removed from

the notebook and the notebook must not be connected to the power supply,

see "Preparing to remove components", Page 50.

Only use memory expansion modules that have been approved for your

notebook (see "T e chnical data", Page 66).

Never use force when installing or removing a memory extension.

Make sure that foreign objects do not fall into the memory extension compartment.

You must open the service compartment to remove or install a memory module. On some devices,

opening the compartment may expose other components. These components should be removed

and replaced only by authorised specialists. Therefore, be sure to observe the following:

Individual components can become very hot during operation. Therefore, we

recommend that you wait one hour after switching off the notebook before removing

or installing memory modules. Otherwise, there is a risk of suffering burns!

As some components are exposed that are sensitive to static electricity, please take

note of chapter "Notes on installing and removing boards and components", Page 49.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing the cover

►

Remove the screws (1).

Lift the cover off the notebook (2).

Removing memory modules

►

Carefully push the two mounting

clips outwards (1).

Memoryem

anlseion

The memory module snaps upwards (2).



►

Pull the memory module out of its slot

in the direction of the arrow (3).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Installing a memory module

►

Insert the memory module with the contacts

and the recess (a) facing the slot (1).

Memoryem

anlseion

Carefully push the memory module

downwards until you feel it click

into place (2).

Securing the cover

►

Place the cover into its installation position in the direction of the arrow (1).

Secure the cover with the screws (2).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing and installing the hard disk

Removing a cover

►

Remove the battery (see Chapter "Removing the battery", Page 30).

►

Remove the screws (1).

Keep the screws in a safe place. If you are removing more than one component at

the same time, store the screws for the individual components separately from each

other. If you install the wrong screws, components may be damaged.

Lift the cover off the notebook (2).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing a hard disk

►

Use the pulling aid to pull the hard disk in the direction of the arrow (1) until the contacts disengage.

Remove the hard disk from the hard disk compartment (2).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Installing a hard disk

If you are installing more than one component at the same time, keep the screws for

the individual components separately from each other and make sure that you use the

correct screws. If you install the wrong screws, components may be damaged.

►

Place the hard disk into the hard disk compartment (1).

Push the hard disk in the direction of the arrow (2) until the contacts engage.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Attaching the cover

►

Place the cover in the correct mounting position (1).

If you remove more than one component at the same time, keep the screws for the

individual components separately from each other and make sure that you use the

correct screws. If you install the wrong screws, components may be damaged.

►

Tighten the screws (2).

Insert the battery (see Chapter "Inserting battery", Page 31).

Finishing component removal

After you have removed or changed the system components as you required, please

prepare your device for operation again as follows:

►

Install the battery again (see "Inserting battery", Page 31).

Turn the notebook the right way up again and place it on a ﬂat surface.

Reconnect the cables that you disconnected before.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings in BIOS Setup Utility

BCSHyeIoaOstnrutdSﬁ

wgmSua

csrtaeoeutcntpitoﬁiUngngt,ﬁuiBslgirt,IauyBO

riIaSo

tnSiSo

nStueptuUtUilityility

The BIOS Setup Utility allows you to set the system functions and the hardware

conﬁguration for the notebook.

When it is delivered, the notebook is set to factory default settings. You can

change these settings in BIOS Setup Utility. Any changes you make take effect as

soon as you save and exit the BIOS Setup Utility.

The BIOS Setup Utility program contains the following menus:

About

Displays information relating to the BIOS, processor and notebook

Advanced system settings

System

Advanced

Conﬁguration of various hardware components, such as mouse, keyboard,

processor

Security

Boot

Password settings and security functions

Conﬁguration of the start-up sequence

Exits the BIOS Setup Utility

Exit

Starting the BIOS Setup Utility

►

Reboot the device (switch off/on or reboot the operating system).

BIOSSetupUtility

The following or a similar display appears on the screen at start-up:



<F2> BIOS Setup <F12> Boot Menu

►

Press the function key

If a password has been assigned, enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator

or contact our customer service centre.

The BIOS Setup Utility starts.

Operating BIOS Setup Utility

BIOSSetupUtility

Press the

key to display help on the operation of the BIOS Setup Utility. The description

of the individual settings is shown in the right-hand window of the BIOS Setup Utility.

With the

key you can load the default settings of the BIOS Setup Utility.

←

→

►

Use the cursor keys

to select the menu you wish to access to make changes.

The menu is displayed on the screen.

Select the option you want to change with the cursor keys

Press the Enter key.



↑

↓

►

ESC

Press the

key to exit the selected menu.

For future reference, make a note of the changes you have made (for example, in this manual).

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings in BIOS Setup Utility

Exiting BIOS Setup Utility

BIOSSetupUtility

You need to select the desired option in the Exit menu and activate it by pressing the Enter key:

Exit Saving Changes - save changes and exit BIOS Setup Utility

►

To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.

The notebook is rebooted and the new settings come into effect.



Exit Discarding Changes – Discard changes and

exit BIOS Setup Utility

►

To discard the changes, select Exit Discarding Changes and Yes.

The settings in place when BIOS Setup Utility was called remain effective. BIOS

Setup Utility is terminated and the notebook is rebooted.



Load Setup Defaults – Copy Standard Entries

►

To copy the standard entries for all menus of the BIOS Setup Utility,

choose Load Setup Defaults and Yes.

Discard Changes – Discard changes without exiting

the BIOS Setup Utility

►

To discard the changes you have made, select Discard Changes and Yes.

The settings in place when BIOS Setup Utility was called remain effective.

You can now make additional settings in the BIOS Setup Utility.



►

If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.

Save Changes - save changes without exiting

the BIOS Setup Utility

►

To save the changes, select Save Changes and Yes.

The changes are saved. You can now make additional settings in the BIOS Setup Utility.

If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.



►

Save Changes and Power Off

►

To save the changes and switch off your device, select Save Changes and Power Off and Yes.

The changes are saved. Your device is shut down.



Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

FTiraoultbleshooting

Follow the safety notes in the "Safety/Regulations" manual when

connecting or disconnecting cables.

If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:

►

Make a note of the steps and the circumstances that led to the fault. Also

make a note of any error messages displayed.

►

Switch the notebook off.

Please contact the Hotline/Service Desk.

You can ﬁnd the telephone numbers in the service desk list. Please have

the following information ready when you call:

•

The model name and serial number of the notebook. The serial number is

located on a sticker on the underside of the notebook.

•

Notes of any messages that appear on the screen and information on acoustic signals.

Any changes you have made to the hardware or software since

receiving the notebook.

•

Any changes you have made to the BIOS Setup settings since receiving the notebook.

Your system conﬁguration and all peripheral devices connected to your system.

Your sales contract.

Our notebooks have been designed primarily with mobile applications in mind. This

means that considerable effort has been made to optimise components and equipment

in terms of weight, space and energy requirements. Depending on the particular

conﬁguration you have purchased, it is possible that functionality may be slightly reduced

compared to a desktop PC if you are running processor-intensive gaming software, e.g.

games with intensive 3D graphics. Updating your hardware with drivers which have not

been approved by Fujitsu Technology Solutions may result in performance losses, data

losses or malfunction of the equipment. A list of approved drivers and current BIOS

versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"

Help if problems occur

Should you encounter a problem with your computer that you cannot resolve yourself:

►

Note the ID number of your device. The ID number is found on the type rating

plate on the back or underside of the casing.

For further clariﬁcation of the problem, contact the Service Desk for your country (see the

Service Desk list or visit the Internet at

"http://support.ts.fujitsu.com/contact/servicedesk/ServiceDeskNumber_Int.asp"). When you

do this, please have ready the ID number and serial number of your system.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

Restoring the hard disk contents under Windows

HOapredrdaitsingsystem,restoring

You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities

CD/DVD" to reinstall the operating system.

The instructions are provided on the case of the Recovery CD.

During the reinstall process your personal ﬁles and any installed programs

will be deleted. We advise you to backup your ﬁles to an external hard

drive, or CD / DVD disk before you start.

►

Switch the notebook on.

The following display brieﬂy appears on the screen during start-up:

<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup



F12

►

When this message appears, press the function key

Insert the "Windows Recovery CD" into the optical drive.

Select CD-ROM and press the Enter key.

Follow the instructions on the screen.

After the installation you must install all the drivers again. Some installed hardware

components will not be correctly supported until this has been done.

►

Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.

Click on the Desk Update button.

Select Automatic driver installation (Express) and click on Start installation.

Follow the instructions on the screen.

Restart your notebook when the driver installation is completed.

The notebook’s date or time is incorrect

STIDBniuamcfmto

i,nr

edboeiacnatrtyct

tiloimeagrrthrey

et,

scltoitamveings

Cause

Troubleshooting

Time and date are incorrect.

►

With the BIOS-Setup-Utility, you can set the

date and time in the main menu.

If the time and date are still set incorrectly after

switching on the notebook.

►

Please contact your sales outlet or our

Hotline/Service Desk.

The notebook’s LCD screen remains blank

LCDscreenistoodark

Cause

Troubleshooting

Monitor is switched off.

External monitor or television set connected.

►

Press a key or touch the touchpad.

Press the key combination to switch the

screen output, see "Key combinations",

Page 23.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The LCD screen is difﬁcult to read

LCDscreen

Cause

Troubleshooting

Reﬂected glare

►

Turn the notebook or alter the tilt of the LCD

screen.

Increase the brightness of the screen.

The external monitor remains blank

Monitor

Cause

Troubleshooting

Monitor is switched off.

►

Switch the external monitor on.

Press any key to continue.

Power saving has been activated (monitor is

blank).

Brightness is set to dark.

►

Adjust the brightness of the monitor.

Screen output is set to the notebook’s LCD

screen

Press the key combination to switch the

screen output, see "Key combinations",

Page 23.

The external monitor’s power cable or data

cable is not connected properly.

►

Switch off the external monitor and the

notebook.

Check whether the power cable is plugged

properly into the external monitor and into

the power socket.

►

Check whether the data cable is properly

connected to the notebook and the external

monitor (if it is plugged in with a connector).

Switch on the external monitor and the

notebook.

The external monitor is blank or the image is unstable

SMcorneietonr

Cause

Troubleshooting

The wrong external monitor has been selected

or the wrong screen resolution has been set for

the application program.

►

Terminate the application program in

Alt F4

. If the

Windows by pressing

fault persists after closing the program, use

the key combination for switching the screen

output (see "Key combinations", Page 23) to

switch over to the notebook’s LCD screen.

Change the following setting:

►

Set the screen resolution: Set the screen

resolution as described in the documentation

for your operating system.

Select monitor: Select monitor 1 or 2 as

described in the documentation for your

operating system.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The notebook cannot be started

Notebook

Cause

Troubleshooting

The battery is not installed correctly.

►

Check whether the battery is installed

correctly in its compartment.

►

Switch the notebook on.

Charge the battery.

The battery is dead.

►

Insert a charged battery.

Connect the mains adapter to the

notebook.

The power adapter is not connected correctly.

►

Check whether the mains adapter is

connected correctly to the notebook.

Switch the notebook on.

The notebook stops working

NEnoetergbyosoakvingmode

Cause

Troubleshooting

Notebook is in energy saving mode.

►

Leave energy saving mode.

An application programme has caused the

malfunction.

Close the application program or restart

the notebook (by restarting the operating

system or switching the device off and back

on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

Connect the mains adapter to the

notebook.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched

on and ready for operation (refer to the

documentation supplied with the printer).

The printer is not connected correctly.

Check that the data cable connecting

the notebook to the printer is properly

connected.

The printer driver is faulty or not correctly

installed, or it is the wrong printer driver.

Check that the data cable connecting

the notebook to the printer is properly

connected.

Check whether the correct printer driver is

loaded (refer to the printer documentation).

The radio connection to a network does not work

Theradioconnectiontoanetworkdoesnotwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the radio component on (see

"Switching the wireless components on and

off", Page 39).

The wireless component is enabled. Despite

this, the wireless connection to a network does

not work.

►

Check whether the radio connection is

switched on via the software.

Further information on using the radio

component can be found in the help ﬁles.

Acoustic warnings

AEcrrooursticerrormessages

Cause

Troubleshooting

Charge the battery.

A beep sounds every few seconds.

►

The battery is almost ﬂat.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

Error messages on the screen

Errormessages: onthescreen

This section describes the error messages generated by the BIOS Setup. Error messages displayed

by the operating system or programmes are described in the relevant documentation.

If the error message appears repeatedly, despite troubleshooting measures, please

contact the place of purchase or our customer service centre.

Error message/cause

Resolution

CMOS battery bad

►

Contact your sales outlet or our customer

service centre.

If the error message occurs repeatedly, the

buffer battery in the notebook is ﬂat.

System CMOS checksum bad - default conﬁguration

used

►

Switch the notebook off.

Switch the notebook on.

The system conﬁguration information is

Press the function key

to access the

incorrect.

BIOS Setup.

►

In the BIOS Setup, select the Exit menu.

Select the entry Load Setup Defaults.

Select OK and press the Enter key.

Extended memory failed at offset: xxxx Failing Bits:

zzzz zzzz

Check whether the additional memory

module has been inserted correctly.

When testing the extended memory an error has

resulted at the address xxxx.

Failure Fixed Disk n

►

Start the BIOS Setup (Primary Master

submenu) and select the correct settings.

The settings of the hard disk drive are incorrect.

Keyboard controller error

►

Switch the notebook off with the ON/OFF

switch.

Wait 3 - 5 seconds and switch on the

notebook again.

Keyboard error

If you are using an external keyboard:

►

Check the connection and reboot the

notebook.

nn Stuck key

►

Make sure that no key is pressed.

Operating system not found

Check in the BIOS Setup whether your hard

disk has been set correctly.

►

Make sure that the operating system is

installed on the corresponding drive.

Press <F1> to resume, <F2> to SETUP

Press the

function key to start the

operating system.

This error message appears if an error occurs

during the self-test before starting the operating

system.

Press the function key

to access the

BIOS Setup.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

Error message/cause

Resolution

Previous boot incomplete - Default conﬁguration

used Due to an error during the previous system

boot, default values were used for certain

settings. Check the settings in the BIOS Setup.

►

Press the

to do so.

function key when prompted

Real time clock error

►

Contact your sales outlet or our customer

service centre.

nnnnK Shadow RAM failed at offset: xxxx Failing

Bits: zzzz

Contact your sales outlet or our customer

service centre.

System battery is dead - Replace and run SETUP

System cache error - Cache disabled

System timer error

Contact your sales outlet or our customer

service centre.

Contact your sales outlet or our customer

service centre.

Contact your sales outlet or our customer

service centre.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Technicaldata

LIFEBOOK

Technicaldata

Ambient conditions

Temperature:

Operation

5 ℃ ... 35 ℃

Transportation

-15 ℃ ... 60 ℃

Dimensions

Width x depth x height (front/back)

378 mm x 252 mm x 29.2 mm/35.7 mm (excl.

rubber feet) or 38.8 mm (incl. rubber feet)

Weight (including 6-cell rechargeable battery)

Approx. 2.5 kg

The data sheet for the device provides further technical data. You can ﬁnd the data

sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/index.html".

Rechargeable battery

You can ﬁnd the information on the batteries used in your device on the

Internet at "http://www.fujitsu.com/fts/support/index.html".

6-cell rechargeable battery

Rated voltage

Rated capacity

10.8 V

4400 mAh (48 Wh)

Power adapter, 65 W

Technicaldata

Primary

Rated voltage

100 V to 240 V (automatic)

50 Hz to 60 Hz (automatic)

Rated frequency

Secondary (device-dependent)

Rated voltage

19 V

Max. rated current

3.42 A

Secondary (device-dependent)

Rated voltage

20 V

Max. rated current

3.25 A

An additional mains adapter or power cable can be ordered at any time.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

Energy Star

Products which are Energy Star certiﬁcated and labelled always meet the full

requirements of the standard when shipped. Please note that installation of

after-market hardware and software, changes to the BIOS or to the power

options may affect power consumption. The properties guaranteed by the

Energy Star label can then no longer be guaranteed.

Devices which are certiﬁed according to the Energy Star environmental

mark help to save money and reduce the emission of greenhouse gases.

Power Management settings on delivery:

•

Monitor switched off after < 15 minutes of inactivity

Automatic activation of energy saving mode (ACPI S3): < 30 minutes

of inactivity

Detailed information about the requirements of the "Energy Star"

environmental mark and the products which satisfy these requirements

can be found on the Internet at "https://www.energystar.gov/".

Disposal and recycling

Notes

Information about this subject can be found on your notebook or on our Internet pages.

Declarations of Conformity

Declarationofconformity

The "Declarations of Conformity" for the device can be found at our Internet

address under: "http://ts.fujitsu.com/ce".

Fujitsu Technology Solutions hereby declares that your device is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

CE marking

CEmarking

CE marking for devices with radio component

This equipment complies with the requirements of Directive 1999/5/EC of the

European Parliament and Commission from 9 March, 1999 governing Radio

and Telecommunications Equipment and mutual recognition of conformity.

This equipment can be used in the following countries:

Belgium

Estonia

Bulgaria

Finland

Denmark

France

Germany

Greece

Italy

Ireland

Iceland

Latvia

Malta

Liechtenstein

Lithuania

Norway

Luxembourg

Austria

The

Netherlands

Poland

Portugal

Slovakia

Hungary

Rumania

Slovenia

Cyprus

Sweden

Spain

Switzerland

Czech Republic

Contact the corresponding government ofﬁce in the respective country for

current information on possible operating restrictions. If your country is

not included in the list, then please contact the corresponding supervisory

authority as to whether the use of this product is permitted in your country.

Regulatory notices

If there is no FCC logo and also no FCC ID on the device then this device is

not approved by the Federal Communications Commission (FCC) of the USA.

Although it is not explicitly forbidden to travel in the US trading area carrying this

device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH

recommends not to bring this device into the US trading area.

Regulatory information for notebooks without radio device

Regulatoryinformation

NOTICE:

Changes or modiﬁcations not expressly approved by Fujitsu Technology Solutions

could void this user’s authority to operate the equipment.

Notice to Users of Radios and Television

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

•

Connect the equipment into an outlet that is on a different circuit than the receiver.

Consult the dealer or an experienced radio/TV technician for help.

Notice to Users of the US Telephone Network

Your notebook may be supplied with an internal modem which complies with Part 68 of the

FCC rules. On this notebook is a label that contains the FCC Registration Number and the

Ringer Equivalence Number (REN) for this equipment among other information. If requested,

the user must provide their telephone company with the following information:

1. The telephone number to which the notebook is connected.

2. The Ringer Equivalence Number (REN) for this equipment.

3. The equipment requires a standard modular jack type USOC RJ-11C

which is FCC Part 68 compliant.

4. The FCC Registration Number.

This equipment is designed to be connected to the telephone network or premises wiring using

a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord

between the modem and the telephone network with a minimum of 26AWG.

The REN is used to determine the number of devices that you may connect to your telephone

line and still have all of those devices ring when your number is called. Too many devices

on one line may result in failure to ring in response to an incoming call. In most, but not all,

areas the sum of the RENs of all of the devices should not exceed ﬁve (5). To be certain

of the number of devices you may connect to your line, as determined by the RENs, contact

your local telephone company. If this equipment causes harm to the telephone network, your

telephone company may discontinue your service temporarily. If possible, they will notify you

in advance. If advance notice is not practical they will notify you as soon as possible. You

will also be advised of your right to ﬁle a complaint with the FCC.

This fax modem also complies with fax branding requirements per FCC Part 68.

Your telephone company will probably ask you to disconnect this equipment from the telephone

network until the problem is corrected and you are sure that the equipment is not malfunctioning.

This equipment may not be used on coin-operated telephones provided by your telephone

company. Connection to party lines is subject to state tariffs. Contact your state’s public utility

commission, public service commission or corporation commission for more information.

This equipment includes automatic dialing capability. When programming and/or

making test calls to emergency numbers:

•

Remain on the line and brieﬂy explain to the dispatcher the reason for the call.

Perform such activities in off-peak hours, such as early morning or late evening.

FCC rules prohibit the use of non-hearing aid compatible telephones in the

following locations or applications:

•

All public or semi-public coin-operated or credit card telephones.

Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a

person with impaired hearing might be isolated in an emergency.

•

Places where telephones are speciﬁcally installed to alert emergency authorities

such as ﬁre, police or medical assistance personnel.

•

Hospital rooms, residential health care facilities, convalescent homes and prisons.

Hotel, motel or apartment lobbies.

Stores where telephones are used by patrons to order merchandise.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

•

Public transportation terminals where telephones are used to call taxis or

to reserve lodging or rental cars.

In hotel and motel rooms as at least ten percent of the rooms must contain hearing

aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which

will be provided to hearing impaired customers on request.

DOC (Industry CANADA) notices

DOC(INDUSTRYCANADA)NOTICES

Notice to Users of Radios and Television

This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment

Regulations.

CET appareil numérique de la class B respecte toutes les exigence du Réglement

sur le matérial brouilleur du Canada.

Notice to Users of the Canadian Telephone Network

NOTICE:

This equipment meets the applicable Industry Canada Terminal Equipment Technical

Speciﬁcations. This is conﬁrmed by the registration number. The abbreviation, IC, before

the registration number signiﬁes that registration was performed based on a Declaration of

Conformity indicating that Industry Canada technical speciﬁcations were met. It does not

imply that Industry Canada approved the equipment. Before connecting this equipment to

a telephone line the user should ensure that it is permissible to connect this equipment to

the local telecommunication facilities. The user should be aware that compliance with the

certiﬁcation standards does not prevent service degradation in some situations.

Repairs to telecommunication equipment should be made by a Canadian authorised

maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or

any equipment failures may give the telecommunication company cause to request the

user to disconnect the equipment from the telephone line.

NOTICE:

The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned

to each terminal equipment provides an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed ﬁve.

CAUTION:

For safety, users should ensure that the electrical ground of the power utility, the

telephone lines and the metallic water pipes are connected together. Users should NOT

attempt to make such connections themselves but should contact the appropriate electric

inspection authority or electrician. This may be particularly important in rural areas.

Avis Aux Utilisateurs Du Réseau Téléphonique Canadien

AVIS : Le présent matériel est conforme aux spéciﬁcations techniques d’Industrie Canada

applicables au matériel terminal. Cette conformité est conﬁrmée par le numéro d’enregistrement.

Le sigle IC, placé devant le numéro d’enregistrement, signiﬁe que l’enregistrement s’est effectué

conformément à une déclaration de conformité et indique que les spéciﬁcations techniques

d’Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vériﬁer

s’il est permis de connecter cet équipement aux installations de télécommunications

locales. L’utilisateur est averti que même la conformité aux normes de certiﬁcation ne

peut dans certains cas empêcher la dégradation du service.

Les réparations de l’équipement de télécommunications doivent être effectuées par un service de

maintenance agréé au Canada. Toute réparation ou modiﬁcation, qui n’est pas expressément

approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de

télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

AVIS : L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.0. L’IES

assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent

être raccordés à une interface téléphonique. La terminaison d’une interface peut consister

en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices

d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.

AVERTISSEMENT:

Pour assurer la sécurité, les utilisateurs doivent vériﬁer que la prise de terre du service

d’électricité, les lignes télphoniques et les conduites d’eau métalliques sont connectées

ensemble. Les utilisateurs NE doivent PAS tenter d’établir ces connexions eux-mêmes,

mais doivent contacter les services d’inspection d’installations électriques appropriés

ou un électricien. Ceci peut être particulièrement important en régions rurales.

UL Notice

This unit requires an AC adapter to operate. Only use a UL Listed Class 2 adapter.

The correct output rating is indicated on the AC adapter label. Refer to the illustration

below for the correct AC Adapter output polarity:

CAUTION:

To reduce the risk of ﬁre, use only 26AWG or larger telecommunications line cord.

For Authorized Repair Technicians Only

CAUTION:

For continued protection against risk of ﬁre, replace only with the

same type and rating fuse.

WARNING:

Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

FCC regulatory information for notebooks with radio device

Regulatoryinformation

Federal Communications Commission statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may

cause undesired operation of this device.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy. If not installed and used in accordance with

the instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.

4. Consult the dealer or an experienced radio/TV technician for help.

Please note the following regulatory information related to the optional radio device.

FCC Radio Frequency Exposure statement

This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the

requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF

Exposure from radio frequency devices. The radiated output power of this radio device is far below

the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner

that the potential for human contact during normal operation is minimized. When using this device, a

certain separation distance between antenna and nearby persons must be maintained to ensure RF

exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1

standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).

Regulatory Notes and Statements

Radio device, health and authorisation for use

Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels

of these emissions, however, are far much less than the electromagnetic energy emissions from

wireless devices such as mobile phones. Radio devices are safe for use by consumers because

they operate within the guidelines found in radio frequency safety standards and recommendations.

The use of the radio devices may be restricted in some situations or environments, such as:

•

on board an airplane, or

in an explosive environment, or

in situations where the interference risk to other devices or services is

perceived or identiﬁed as harmful.

In cases in which the policy regarding use of radio devices in speciﬁc environments is not

clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain

authorization to use these devices prior to operating the equipment.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

Regulatory Information/Disclaimers

Installation and use of this radio device must be in strict accordance with the instructions included

in the user documentation provided with the product. Any changes or modiﬁcations made to this

device that are not expressly approved by the manufacturer may void the user’s authority to operate

the equipment. The manufacturer is not responsible for any radio or television interference caused

by unauthorized modiﬁcation of this device, or the substitution or attachment of connecting cables

and equipment other than those speciﬁed by the manufacturer. It is the responsibility of the user

to correct any interference caused by such unauthorized modiﬁcation, substitution or attachment.

The manufacturer and its authorized resellers or distributors will assume no liability for any damage

or violation of government regulations arising from failure to comply with these guidelines.

Export restrictions

This product or software contains encryption code which may not be exported or

transferred from the US or Canada without an approved US Department of Commerce

export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B

/ NMB 003 B. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesirable operation.

Modiﬁcations not expressly authorised by Fujitsu Technology Solutions may

invalidate the user’s right to operate this equipment.

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Connecting audio devices 48

Connecting headphones 48

Crystal View display

cleaning 14

Ctrl+Alt+Del 24

Cursor control keys 22

Cursor keys 22

Acoustic error messages 63

Alt + T a b 24

Anti-theft protection 41

Audio devices, connecting 48

Audio ports 48

Back tab 24

Backspace 22

Bass loudspeaker (subwoofer) 38

Battery

Date is incorrect 60

Declaration of conformity 67

Device

battery life 28

setting up 16

caring for and maintaining 29

charge level 29, 34

DOC (INDUSTRY CANADA) NOTICES 70

Drive

Battery indicator 19

Battery status indicator

see Battery indicator 19

Battery status meter 29

Battery symbol

see Battery indicator 19

BIOS Setup Utility

calling 57

indicator 19

Emergency removal of data carrier 33

Energy

energy saving 13

Energy saving 13

Energy saving functions 24

Error messages on the screen 64

protecting with password 42

settings 57

Bluetooth

Switching the module off 39

Switching the module on 39

Bluetooth, safety notes 12

Board 49

Buffer battery, load 60

manual emergency removal 33

CE marking 68

Charging capacity, battery 29

Cleaning 14

Components

installing / removing 49

Con ﬁ guration, BIOS Setup Utility 57

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Manual removal of data carrier 33

restoring the contents 60

Hardware con ﬁ guration 57

Microphone, connecting 48

Mobile operation 13

Monitor

Important notes 12

Incorrect date/time 60

see VGA connection socket 46

transporting 13 –14

decrease brightness 24

dif ﬁ cult to read 61

notes 27

Notebook, operation 18

LCD screen is too dark 60

Life, battery 28

Line feed 22

cleaning 14

disposal / recycling 67

Num Lock

indicator 19, 23

see Separate numeric keypad 23

Main memory

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Selecting a location 16

Self-discharge, battery 29

Separate numeric keypad 23

Servicing 49

Operating system

activating system protection 43

cancel system protection 43

protecting with password 43

Operating system, restoring 60

Optical drive 31

Setup

see BIOS Setup Utility 57

Password protection 42

Switching on for the ﬁ rst time 17

System con ﬁ guration 57

System expansion 50

see Adding memory 50

System settings, BIOS Setup Utility 57

power consumption 34

power-management features 34

Power indicator 19

Preparing for operation 16

Printer does not print 63

Radio component:

safety notes 12

Rechargeable battery 28

see Battery 28

Regulatory information

notebooks with radio device 72

Notebooks without radio device 68

The radio connection to a network does

not work 63

Time not correct 60

Time, daylight savings 60

Tips 59

T o ggle output screen 24

Touchpad 23, 25

buttons 25

cleaning 14

dragging items 26

executing commands 26

moving the pointer 25

T o uchpad buttons 23

Transportation 13–14

see VGA connection socket 46

Security functions 41

Security Lock 41

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Using the Kensington Lock Cable 41

Switching the module off 39

Switching the module on 39

Wireless LAN:

VGA connection socket 46

Fujitsu

Download from Www.Somanuals.com. All Manuals Search And Download.

Coleman Range 424 Series User Manual
Coleman Stove 5431B User Manual
Craftsman Automobile Parts 50139 User Manual
Craftsman Lawn Mower 37501 User Manual
Delfield Refrigerator STD4464N 18M User Manual
Dimplex Indoor Fireplace BF series User Manual
Edimax Technology Network Router AR 7182WNB User Manual
Fisher Metal Detector GEMINI 3 User Manual
Garland Range G48 2G36LL User Manual
Generac Power Systems Portable Generator 43733 User Manual