USER'S MANUAL
(Specification and Part Names)
WIDE PLASMA DISPLAY
P42VHA40W/P42HHA40W/P50XHA40W/P55XHA40W/
P63XHA40W
P42VHA40U/P42HHA40U/P50XHA40U/P55XHA40U/
P63XHA40U
P42VHA40A/P42HHA40A/P50XHA40A/P55XHA40A/
P63XHA40A
P42VHA40R/P63XHA40R
Contents
Before Use
• INSTALLATION ........................................................................................................ E-3
Usage
• PART NAMES AND FUNCTIONS............................................................................E-4
Others
• OPTIONS..................................................................................................................E-9
• MAIN SUPPORTED SIGNALS............................................................................... E-10
• SPECIFICATION .................................................................................................... E-12
Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display
correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see
the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and "color"
will be displayed for all other models.
The notation used in this users' manual is "color".
* All operation items of A model are the same as W model.
Please read the description part of "W model" for "A model" in User's manual (2/2).
* The residential warranty for "A model" is enclosed in accessories.
* The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication alphabet or
the management number.
* The illustration of external appearance is for 42" model.
Please acknowledge some differences in the actual product of other models.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.
Display Section
Front
Side
(cm)
(cm)
Upper
10
10
10
Wall
Left
Right
5
Lower
3.5 (for 42”/50”)
5 (for 55”/63”)
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P. E-9 for more information on options.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red):
Stand-by state
Lit (green):
Power ON state
Flashing (red or green):
Malfunction (Flashes differently
depending on the type of
malfunction.)
Remote control signal receiver
Receives signals from the remote control.
Input mode selector button
Input mode selector button
[MODE]
[MODE]
Switches between picture input modes.
VOL + button
VOL - button
Adjusts the audio volume.
Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Ambient Sensor
Detects the brightness of external light.
Do not obstruct it.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY SECTION – BACK AND BOTTOM PART
Back
Bottom
/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model
Connect this terminal to the HDMI output terminal for DVD, etc.
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
RGB1 input terminal (RGB1 INPUT/DVI-D) for the W/U/A models
Connect this terminal to the PC’s display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
Note
• The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS (Continued)
RGB2 input terminal (RGB2 INPUT/mD-sub) for the W/U/A models /
RGB1 input terminal (RGB1 INPUT/mD-sub) for the R model
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
Component video input terminal (VIDEO3 INPUT)
Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
Audio3 input terminal (AUDIO3 INPUT)
Audio2 input terminal (AUDIO2 INPUT)
Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of your VCR, etc. (See the User’s manual (2/2) for the selection of audio input for video
input.)
External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
* See the speaker instruction manual for more information.
Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF INPUT TERMINALS
DVI-D terminal (RGB1 INPUT/DVI-D)
for the W/U/A models
Pin No.
Signal
T.M.D.S. Data2– 9
T.M.D.S. Data2+ 10
Pin No.
Signal
Pin No.
Signal
1
2
3
T.M.D.S. Data1– 17
T.M.D.S. Data1+ 18
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data2
Shield
11
T.M.D.S. Data1
Shield
19
T.M.D.S. Data0
Shield
4
5
6
7
8
—
12
13
14
15
16
—
20
21
22
—
—
—
—
DDC Clock
DDC Data
—
+5V Power
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
Ground (for +5V) 23
Hot Ploug Detect 24
mD-sub input terminal
(RGB2 INPUT/mD-sub) for the W/U/A models
(RGB1 INPUT/mD-sub) for the R model
Pin No.
Input signal
Pin No.
Input signal
1
2
3
4
5
6
7
8
Red
9
—
Green
Blue
10
Ground
—
11
—
12
—
Ground
Ground
Ground
Ground
13
Horizontal synchronization
14
Vertical synchronization
15
—
Frame
Ground
RS-232C terminal (RS-232C)
Pin No.
Signal
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)
RD (Received Data)
TD (Transmit Data)
DTR (Data Terminal ready)
GND (Ground)
DSR (Data Set Ready)
RTS (Request To send)
CTS (Clear To Send)
RI (Ring Indication)
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS (Continued)
HDMI input terminal (VIDEO5 INPUT/HDMI)
for the U model
Pin No.
Input signal
T.M.D.S. Data2+
Pin No.
11
Input signal
T.M.D.S. Clock Shield
T.M.D.S. Clock–
CEC
1
2
T.M.D.S. Data2 Shield
T.M.D.S. Data2–
12
3
13
4
T.M.D.S. Data1+
14
Reserve
5
T.M.D.S. Data1 Shield
T.M.D.S. Data1–
15
DDC Clock
6
16
DDC Data
7
T.M.D.S. Data0+
17
Ground (for +5V)
+5V Power
8
T.M.D.S. Data0 Shield
T.M.D.S. Data0–
18
9
19
Hot Plug Detect
FG
10
T.M.D.S. Clock+
Frame
HDMI (High-Definition Multimedia Interface)
HDMI is a standard for home digital interfaces, which can transmit images as well as multichannel
audio signals and control signals through one cable.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS
Wall-mounting Bracket
0° to 15° mounting angle
P-WB4201 (for 42” model/50” model)
P-WB6300 (for 55” model/63” model)
Ceiling unit
0° to 15° mounting angle
P-CT4200 (for 42” model/50” model)
P-CT6300 (for 55” model/63” model)
Desktop Stand unit
P-TT4202 (for 42” model/50” model/55”
model)
P-TT6300 (for 63” model)
Speaker
(1 set of 2 speakers)
P-SP1000 (for attaching to the display) for
42” model/50” model
P-SP5010 (for attaching to the display) for
55” model
P-SP6300 (for attaching to the display) for
63” model
P-SP4200 (for mounting on the speaker
stands) for 42” model
P-SP5010 (for mounting on the speaker
stands) for 50” model/55” model
P-ST4200 (for P-SP4200)
Desktop Speaker Stand
(1 set of 2 speaker stands)
P-ST5000 (for P-SP5010)
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer
before purchasing.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION
This display (P42VHA40/P42HHA40/P50XHA40) is for use only with Fujitsu General Limited's option (P-WB4201, P-CT4200, P-TT4202).
This display (P55XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT4202).
This display (P63XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT6300).
Using this display with other option can cause instability resulting in possible injury.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of
the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust
the parameters.
When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in
accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines) Horizontal frequency (kHz) Vertical frequency (Hz)
Signal
DVI-D
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
848 x 480
852 x 480
1360 x 768
720 x 485
720 x 575
31.47
37.50
43.27
31.47
37.88
46.88
53.67
48.36
60.02
68.68
63.98
79.98
31.02
31.72
47.71
15.73
15.63
59.94
75.00
85.01
70.09
60.32
75.00
85.06
60.00
75.03
84.99
60.02
75.03
60.00
59.97
60.01
59.94
50.00
VGA
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
SVGA 75 Hz
SVGA 85 Hz
XGA 60 Hz
XGA 75 Hz
XGA 85 Hz
SXGA 60 Hz
SXGA 75 Hz
※
60 fields
50 fields
※It doesn’t support the model with 42” display (displayed pixels 852 x 480 dots x lines).
* In the DVI-D mode, the input signal can be restricted partly.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode) Main corresponding signals (Video, S-video mode)
Horizontal
Vertical
Horizontal
Vertical
Signal
HDMI
Signal
NTSC
frequency (kHz)
frequency (Hz)
frequency (kHz)
frequency (Hz)
15.73
15.63
31.47
31.25
45.00
37.50
33.75
28.13
59.94
SDTV 480i
SDTV 576i
SDTV 480p
SDTV 576p
HDTV 720p
HDTV 720p
HDTV 1080i
HDTV 1080i
15.73
15.63
15.63
15.63
15.63
15.73
15.73
59.94
50.00
59.94
50.00
60.00
50.00
60.00
50.00
50.00
50.00
59.52
50.00
59.95
59.94
PAL
SECAM
PAL60
N-PAL
M-PAL
4.43NTSC
Note
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this
event, match the input signals to another frequency rather than those listed above.
• You can check input signals through "Information" on the FEATURES Menu screen. (See User's Manual (2/2))
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION
WIDE PLASMA DISPLAY
Model
Screen size
P42VHA40W/A
P42HHA40W/A
P50XHA40W/A
P55XHA40W/A
P63XHA40W/A
42" wide screen:
92.1 cm (W) x 51.8
cm (H)
42" wide screen:
92.2 cm (W) x 52.2
cm (H)
50" wide screen:
110.6 cm (W) x 62.2
cm (H)
55" wide screen:
122.9 cm (W) x 69.1
cm (H)
63" wide screen:
139.3 cm (W) x 78.3
cm (H)
(105.7 cm diagonal)
36.3 inch (W) x 20.4
inch (H)
(106.0 cm diagonal)
36.3 inch (W) x 20.6
inch (H)
(126.9 cm diagonal)
43.5 inch (W) x 24.5
inch (H)
(140.0 cm diagonal)
48.4 inch (W) x 27.2
inch (H)
(159.8 cm diagonal)
54.8 inch (W) x 30.8
inch (H)
(41.6 inch diagonal)
(41.7 inch diagonal)
(50 inch diagonal)
(55.1 inch diagonal)
(62.9 inch diagonal)
Aspect ratio
16:9 (wide)
Number of pixels
Weight
852 (H) x 480 (V)
31.5 kg / 69 lbs
1024 (H) x 1024 (V) 1366 (H) x 768 (V)
45 kg / 99 lbs
55 kg / 121 lbs
72 kg / 159 lbs
Outer dimensions
103.9 (W) x 64.0 (H) x 8.7 (D) cm
40.9 (W) x 25.2 (H) x 3.4 (D) inch
(does not include outer projections)
121.6 (W) x 72.6 (H)
x 10.0 (D) cm
138.0 (W) x 80.8 (H)
x 12.5 (D) cm
150.4 (W) x 89.4 (H)
x 12.3 (D) cm
47.9 (W) x 28.6 (H)
x 3.9 (D) inch
54.3 (W) x 31.8 (H)
x 4.9 (D) inch
59.2 (W) x 35.2 (H)
x 4.8 (D) inch
(does not include
outer projections)
(does not include
outer projections)
(does not include
outer projections)
Power supply
Current rating
110-240 VAC 50/60 Hz
3.2-1.35 A
4.2-1.8 A
4.4-1.9 A
5.8-2.3 A
6.8-2.6 A
External equipment terminals
Video input
terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
RCA terminal
S terminal
1 Vp-p/75 Ω
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
1 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals Y:
PB/CB: 0.7 Vp-p/75 Ω
PR/CR: 0.7 Vp-p/75 Ω
PC input terminal RGB1 input
RGB2 input
DVI-D terminal (EIA/CEA-861B Compliant)
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Audio terminals
Control terminal
2 audio input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
RS-232C connector (D-sub 9-pin)
External speaker
output terminal
Max. output: 10 W + 10 W, 6 Ω
Operating
conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries, 1 residential
warranty (for the A model)
Regulation
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
EN61000-3-2
1998, Class B
1995
EN61000-3-3
EN55024
1995
1998
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
WIDE PLASMA DISPLAY
Model P42VHA40U
P42HHA40U
P50XHA40U
P55XHA40U
P63XHA40U
Screen size
42" wide screen:
92.1 cm (W) x 51.8
cm (H)
42" wide screen:
92.2 cm (W) x 52.2
cm (H)
50" wide screen:
110.6 cm (W) x 62.2
cm (H)
55" wide screen:
122.9 cm (W) x 69.1
cm (H)
63" wide screen:
139.3 cm (W) x 78.3
cm (H)
(105.7 cm diagonal)
36.3 inch (W) x 20.4
inch (H)
(106.0 cm diagonal)
36.3 inch (W) x 20.6
inch (H)
(126.9 cm diagonal)
43.5 inch (W) x 24.5
inch (H)
(140.0 cm diagonal)
48.4 inch (W) x 27.2
inch (H)
(159.8 cm diagonal)
54.8 inch (W) x 30.8
inch (H)
(41.6 inch diagonal)
(41.7 inch diagonal)
(50 inch diagonal)
(55.1 inch diagonal)
(62.9 inch diagonal)
Aspect ratio
16:9 (wide)
Number of pixels
Weight
852 (H) x 480 (V)
31.5 kg / 69 lbs
1024 (H) x 1024 (V) 1366 (H) x 768 (V)
45 kg / 99 lbs
55 kg / 121 lbs
72 kg / 159 lbs
Outer dimensions
103.9 (W) x 64.0 (H) x 8.7 (D) cm
40.9 (W) x 25.2 (H) x 3.4 (D) inch
(does not include outer projections)
121.6 (W) x 72.6 (H)
x 10.0 (D) cm
138.0 (W) x 80.8 (H)
x 12.5 (D) cm
150.4 (W) x 89.4 (H)
x 12.3 (D) cm
47.9 (W) x 28.6 (H)
x 3.9 (D) inch
54.3 (W) x 31.8 (H)
x 4.9 (D) inch
59.2 (W) x 35.2 (H)
x 4.8 (D) inch
(does not include
outer projections)
(does not include
outer projections)
(does not include
outer projections)
Power supply
Current rating
110-240 VAC 50/60 Hz
3.2-1.35 A
4.2-1.8 A
4.4-1.9 A
5.8-2.3 A
6.8-2.6 A
External equipment terminals
Video input
terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
RCA terminal
S terminal
1 Vp-p/75 Ω
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
1 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals Y:
PB/CB: 0.7 Vp-p/75 Ω
PR/CR: 0.7 Vp-p/75 Ω
VIDEO5 INPUT
HDMI terminal (HDMI type A connector)
PC input terminal RGB1 input
RGB2 input
DVI-D terminal (EIA/CEA-861B Compliant)
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Audio terminals
Control terminal
2 audio input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
RS-232C connector (D-sub 9-pin)
External speaker
output terminal
Max. output: 10 W + 10 W, 6 Ω
Operating
conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries
Regulation
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
EN61000-3-2
1998, Class B
1995
1995
EN61000-3-3
EN55024
1998
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
Note
• Specifications and external appearance may be change for the sake of improvement.
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least
1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while
working.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION (Continued)
WIDE PLASMA DISPLAY
Model
P42VHA40R
P63XHA40R
Screen size
42" wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)
63" wide screen:
139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal)
54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal)
Aspect ratio
16:9 (wide)
Number of pixels
Weight
852 (H) x 480 (V)
31.5 kg / 69 lbs
1366 (H) x 768 (V)
72 kg / 159 lbs
Outer dimensions
103.9 (W) x 64.0 (H) x 8.7 (D) cm
40.9 (W) x 25.2 (H) x 3.4 (D) inch
(does not include outer projections)
150.4 (W) x 89.4 (H) x 12.3 (D) cm
59.2 (W) x 35.2 (H) x 4.8 (D) inch
(does not include outer projections)
Power supply
Current rating
110-240 VAC 50/60 Hz
4.2-1.7 A
6.8-2.6 A
External equipment terminals
Video input
terminals
VIDEO1 INPUT (Video input)
RCA terminal
S terminal
1 Vp-p/75 Ω
VIDEO2 INPUT (S-video input)
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
1 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals Y:
PB/CB: 0.7 Vp-p/75 Ω
PR/CR: 0.7 Vp-p/75 Ω
PC input terminal RGB1 input
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Audio terminals
Control terminal
2 audio input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
RS-232C connector (D-sub 9-pin)
External speaker
output terminal
Max. output: 10 W + 10 W, 6 Ω
Operating
conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries
Regulation
• CE Safety: EN60065
EMC: EN55022
1998, Class B
EN61000-3-2
EN61000-3-3
EN55024
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1995
1998
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
Note
• Specifications and external appearance may be change for the sake of improvement.
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least
1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while
working.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
USER'S MANUAL
(Precautions and Adjustment Methods)
WIDE PLASMA DISPLAY
Before Use
• INITIALIZATION OF USER ADJUSTMENT VALUE ..E-35
Usage
Others
• BASIC OPERATIONS................................................E-12
• CLEANING AND MAINTENANCE .............................E-36
Adjustments
• BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS............................................................E-20
• ADJUSTING THE PICTURE......................................E-21
• ADJUSTING SCREEN POSITION AND SIZE ...........E-27
• ADJUSTING AUDIO...................................................E-28
Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the
display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety
precautions (see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and
"color" will be displayed for all other models.
The notation used in this users' manual is "color".
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION
• Receptacle
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly
displayed for long periods. (See P. E-33.)
• Extremely high-precision technology has been used in the manufacture of the plasma display panel, with the effective pixel elements
exceeding 99.99%. Please be aware, however, that fewer than 0.01% of the pixels may be missing or remain constantly lit.
• Some models are fitted with a radiator fan to prevent the display’s internal temperature from rising during operation. Be careful of the air
emitted by the radiator fan, as it may be hot.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for
more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that
the power indicator lamp flashes red or green.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then contact your dealer.
• Install the display in a location close to a main power supply outlet, and where the emergency stop button can be easily reached.
Note
• Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL
REMOTE CONTROL (for the W/R models)
For details, see page Î.
ꢀ
ꢁ
ꢀ
button Î E-12
Switches between Power On and Standby.
(MUTE button) Î E-13
-
Temporarily mutes the audio.
To return the audio to normal, press this button once again, or press the
1
does the
2
3
work also.
ꢂ
(DISPLAY button) Î E-16
Press this button to display the input mode, and screen size status.
The status is displayed for about five seconds.
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢉ
ꢊ
ꢋ
"
4
(PICTURE MODE button) Î E-16
(PICTURE MEMORY button) Î E-16
Press this button to recall a Picture Memory.
(WIDE button) Î E-17
Switches the screen size.
(RGB input mode selector button) Î E-15
Selects RGB1 - 2.
(RGB3/VIDEO4 imput mode selector button) Î E-14
Selects VIDEO4.
(Video input mode selector button) Î E-14
Selects VIDEO1 - 3.
(Volume adjustment buttons) Î E-13
Press these buttons to adjust the volume.
(MENU button) Î E-19–E-35
(ENTER button) Î E-19–E-35
Press this button to fix the entry in the ADJUSTMENT MENU.
(Adjustment buttons) Î E-19–E-35
Use these buttons to select the item or adjust the value in the menu screen.
5
ꢁ
)
–
*
=
"
–
$
12
;
<
CDEF
Note
• Functions may not be available with some models and some device options.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL (Continued)
REMOTE CONTROL (for the U model)
For details, see page Î.
ꢀ
ꢁ
ꢀ
button Î E-12
Switches between Power On and Standby.
(MUTE button) Î E-13
-
Temporarily mutes the audio.
To return the audio to normal, press this button once again, or press the
1
does the
2
3
work also.
ꢂ
(DISPLAY button) Î E-16
Press this button to display the input mode, and screen size status.
The status is displayed for about five seconds.
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢉ
ꢊ
ꢋ
4
(PICTURE MODE button) Î E-16
(PICTURE MEMORY button) Î E-16
Press this button to recall a Picture Memory.
(WIDE button) Î E-17
Switches the screen size.
(Video input mode selector button) Î E-14
Selects VIDEO1 - 5.
(RGB input mode selector button) Î E-15
Selects RGB1 - 2.
(Volume adjustment buttons) Î E-13
Press these buttons to adjust the volume.
(MENU button) Î E-19–E-35
(ENTER button) Î E-19–E-35
Press this button to fix the entry in the ADJUSTMENT MENU.
(Adjustment buttons) Î E-19–E-35
Use these buttons to select the item or adjust the value in the menu screen.
5
ꢁ
"
–
&
)
–
*
12
;
<
CDEF
Note
• Functions may not be available with some models and some device options.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover, slide it outwards
while pressing it down.
(2) Place two AA batteries in the remote
control. Make sure that the batteries are
properly oriented.
(3) Close the cover until it snaps into place.
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
CAUTION
Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/
area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd, etc.).
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL (Continued)
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
Upper
20°
20°
Lower
Left
Right
30°
5 m (Front)
30°
Note
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
Speaker (optional)
Display
Remote
control
To AC outlet
VCR or other external components See P. Î
VCR Î E-8
Satellite tuner Î E-10
PC Î E-11
DVD recorder/player Î E-9
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
VCR
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To video output
To S-video output
To S-video input
To audio outputs
To audio inputs
To video input
Display bottom
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD RECORDER/PLAYER
• Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input
terminal.
• If the component to be connected is equipped with HDMI output terminal, component video output terminal, it is recommended to connect
to the component video terminal.
To component video output
To video output
To video input
To S-video output
To S-video input
To audio outputs
To audio inputs
To component video input
Display bottom
To HDMI output
To HDMI input
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
• Terminal layout may differ and functions may not be available with some models and some device options.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
SATELLITE TUNER
• Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input
terminal.
• If the component to be connected is equipped with HDMI output terminal, component video output terminal, it is recommended to connect to the
component video terminal.
Antenna (commercially available product)
To component video output
To video output
To video input
To S-video output
To S-video input
To audio outputs
To audio inputs
To component video input
Display bottom
To HDMI output
To HDMI input
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
PC
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
To RGB output (DVI-D)
To DVI-D input
To RGB output (mD-sub)
To mD-sub input
To audio output
To audio inputs
Display bottom
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
• Terminal layout may differ and functions may not be available with some models and some device options.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
Pressꢌ/I to the left at the bottom of
the display to the ONꢌstate.
1
The power lamp lights up.
Press ꢀ on the remote control.
The color of the power lamp changes from “Red” to
2
“Green”.
Press " – & or ) – *.
Select the video mode to input.
3
Press ꢀ when the power is ON.
The color of the power lamp changes from “Green”
4
to “Red” and the the power turns “OFF (Stand-by
state)”.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(for the W/R models)
* You can also use the buttons
on the display’s control
panel to perform these steps.
(for the U model)
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Adjusting the volume
Press
1
2
to increase the volume.
Press
to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
When the volume adjustment button is
pressed
Muting the audio
Press
-
.
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume
buttons.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the W model)
Note
• Functions may not be available with some models and some device options.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING INPUT MODE
VIDEO INPUT MODE (for the W/R models)
Press "-= to select the input
mode.
1
You can select from VIDEO1 mode to VIDEO4
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
Video1 mode
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-31.
* You can also use the buttons
on the display’s control
panel to perform these steps.
VIDEO INPUT MODE (for the U model)
Press "-& to select the input
mode.
1
You can select from VIDEO1 mode to VIDEO5
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
Video1 mode
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-31.
* You can also use the buttons
on the display’s control
panel to perform these steps.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB INPUT MODE
Press )-* to select the input
mode.
1
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as follows.
[for the W/U models]
• RGB1: DVI-D
RGB1 mode
• RGB2: mD-sub
[for the R model]
• RGB1: mD-sub
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-31.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the U model)
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information
Press
3
The mode is indicated on the screen for 5 seconds.
.
Picture Mode
Press
4
.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-22)”.
Picture Memory
Press
5
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
.
* For the picture memory settings, see “Setting Picture Memory (P. E-22)”.
(Ex. the W/R models)
Note
• Functions may not be available with some models and some device options.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
Press ꢁ.
The currently selected mode will appear.
1
Press ꢁ to select a desired Screen
Size.
2
Each time you press ꢁ, a different Screen Size
Normal mode
appears. The sequences used are as follows:
When you are in a Video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects
may not be selected.
Wide1 mode
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the W/R models)
Note
• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
• A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
• See P. E-27 for how to adjust the picture size and position.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING PICTURES ON THE WIDE SCREEN (Continued)
SCREEN SIZE
Normal (Video/RGB)
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1 (Video)
Displays natural-looking pictures of standard size on the wide screen.
Picture of
Wide1
standard size
Wide2 (Video)/Wide (RGB)
Ideal for displaying vertically extended pictures such as squeezed pictures.
Vertically
extended picture
Wide2
Zoom1
Zoom2
Zoom1 (Video)/Zoom (RGB)
Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.
Horizontally
extended picture
Zoom2 (Video)
Reduces the height of horizontally extended pictures with captions, without eliminating
the caption. Only the height of pictures is reduced, not the height of the caption.
Horizontally extended
picture with caption
(Captions may not be easy to read, however, depending on the picture.)
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio
16:9 aspect ratio
4
16
(VHF/UHF broadcasting, BS broadcasting)
(HDTV broadcasting)
3
9
1.85:1 aspect ratio
(Vista Vision size)
2.35:1 aspect ratio
(Cinema Vision size)
1.85
2.35
1
1
Note
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
• Functions may not be available with some models and some device options.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT MENU
PICTURE
(E-20)
Signal Contrast (E-21)
POSITION/SIZE (E-27)
Drive Contrast
Brightness
Color
(E-21)
(E-21)
(E-21)
(E-21)
(E-21)
Black Level
(E-23)
MENU
AUDIO
(E-28)
(E-29)
FEATURES
(E-23)
(E-23)
FACTORY DEFAULT(E-35)
Tint
CODEC NR
Sharpness
User Color Temp. (E-24)
Color Focus (E-25)
Progressive Scan (E-26)
Chroma Transient (E-24)
Ambient Sensor (E-21)
Picture Mode (E-22)
PrecisionSetting (E-22)
Picture Memory (E-22)
Default
24 Frame Mode (E-26)
30 Frame Mode (E-26)
Jaggies Filter
Motion Setting
(E-26)
(E-26)
Position
Size
(E-27)
(E-27)
Default
Treble
(E-28)
(E-28)
(E-28)
(E-28)
Bass
Balance
Loudness
Adjustment
(E-29)
Dot Clock
(E-29)
(E-29)
(E-29)
On Screen Menu (E-30)
Clock Phase
Clamp Position
Input Terminal
Others
(E-31)
(E-32)
Auto Calibration (E-29)
OSD
(E-30)
(E-30)
(E-30)
Language
Name Select
Video Input
S-video Input
D-SUB Input
(E-31)
(E-31)
(E-31)
Auto Off-NO SIG. (E-32)
Audio Input
(E-32)
(E-33)
(E-33)
(E-33)
(E-33)
Screen Orbiter
Direct Setting
Code Setting
White Screen
Exhibition Mode (E-34)
Information (E-34)
Note
• The shaded menu items are applied to the U model only.
• Some type of signal can not be selected.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS
• Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint))
Press ;.
The main menu screen will appear.
1
Press E or F to select “PICTURE”.
2
Each time you press E or F, one of the available
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES <
FACTORY DEFAULT
“PICTURE” selected in the main
menu screen
The PICTURE Menu screen will appear.
Press C or D to select “Tint”.
3
4
Press <.
The “Tint” adjustment screen will appear.
(Ex. the W/R models)
“Tint” selected in the PICTURE
Menu screen
Press E or F to change tint values.
5
F: More greenish colors
E: More purplish colors
Press < to store.
6
7
Press ; when you finish.
“Tint” adjustment screen
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* When < is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
* Press
;
to halt the operation in progress.
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-20 for the basic operation procedures.
Adjusting the Signal Contrast
Press F to increase the input signal contrast.
Press E to reduce the input signal contrast.
Press < to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press E to lower the display’s luminance level, and reduce the contrast.
Press < to store.
Adjusting the Brightness
Press F to increase the brightness.
Press E to reduce the brightness.
Press < to store.
Adjusting Color
Press F to darken the color.
Press E to lighten the color.
Press < to store.
Adjusting the Tint
Press F to change the tint to a more greenish color.
Press E to change the tint to a more purplish color.
Press < to store.
Adjusting the Sharpness
Press F to sharpen the Sharpness.
Press E to soften the Sharpness.
Press < to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time E or F is pressed, the setting is switched.
On < Off
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE (Continued)
Setting Picture Mode
Each time you press E or F , the available choices appear in the following sequence.
[Natural]: Enables you to watch pictures with natural color tones and high picture clarity. This
mode is suitable for watching a normal motion picture.
[Fine]: Suitable for watching a dark picture such as a movie.
[Effective]: Displays a screen with detailed contrast.
[Conventional]: Displays a screen approximating that of a conventional TV screen.
[Still]: Suitable for viewing a still picture.
Press < to store.
Precision Setting (for the U model)
Enables advanced Sharpness adjustments.
See page E-23 for details.
Setting Picture Memory
The adjustment status of eight groups of picture adjustment settings can be stored, enabling you to
quickly switch to your desired group of settings for the picture you are planning to watch.
Picture Memory Selection Screen
[Save]: Use C or D to select Memory 1 - 8. If < is pressed, the current picture adjustment
values are stored to the selected Memory.
“Save” Selection Screen
[Load]: Use Cor Dto select Memory 1 - 8. When <is pressed, the values becomes the picture
adjustment values stored in the selected Memory.
“Load” Selection Screen
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECISION SETTING (for the U model)
• See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20.
Even more advanced Sharpness adjustments can be made as required.
Adjusting the Black Level
Press F to strengthen the reproduction of black. (Provides a picture quality with deep blacks.)
Press E to weaken the reproduction of black.
Press < to store.
Setting Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time E or F is pressed, the setting is switched.
Precision Setting Selection
Screen
On < Off
Press < to store.
Setting 3D NR
This enables noise reduction processing with respect to the input signal noise level (reduces screen
flicker for more comfortable viewing).
Each time you press E or F, the available choices appear in the following sequence.
Press < to store.
Setting CODEC NR
This enables noise reduction processing of mosquito noise or block noise generated when digital picture
signals are recorded or replayed.
Each time you press E or F, the available choices appear in the following sequence.
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE (Continued)
Setting Image Enhance
This performs detailed image quality settings.
• Chroma Transient
This function corrects the color contours.
Each time E or F is pressed, the setting is switched.
On < Off
Press < to store.
• Image Identify
This function discerns between the natural image display section and the text display section, and performs correction to enable an
optimized display for each.
Each time E or F is pressed, the setting is switched.
On < Off
Press < to store.
Adjusting the Color Temp.
Use E or F to specify a desired color temperature. Each time you press E or F, one of the available choices appears in the following
sequence:
[–3500]: More reddish colors
[+3500]: More bluish colors
[User]: User Color Temp. setup
Press < to store.
Setting User Color Temp.
Use C or D to select Red, Green, or Blue, and adjust the color temp. for each.
Press F: to strengthen the selected color.
Press E: to weaken the selected color.
Press < to store.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Color Focus
This enables correction with respect to specific color hues within the image.
Independent correction of the hue of skin colors, blue skies, and so on, enables a more brilliant display.
• [Reddish color]
With red at the center, performs the following corrections with respect to the range from magenta to
yellow.
[Tint]: Use E and F to adjust the hue.
[Color]: Use E and F to adjust the color depth.
[Red]: Use E and F to adjust the strength of the red color range.
[Green]: Use E and F to adjust the strength of the green color range.
[Blue]: Use E and F to adjust the strength of the blue color range.
Press < to store.
Color Focus (Reddish color)
Settings Screen
Adjustments can be made in the same way for:
• [Greenish color]: (With green at the center, performs corrections with respect to the range from yellow to cyan.)
• [Bluish color]: (With blue at the center, performs corrections with respect to the range from cyan to magenta.)
• [Targeting Red]
This function corrects the hue and color depth with respect to Red.
[Tint]: Use E and F to adjust the hue.
[Color]: Use E and F to adjust the color depth.
Press < to store.
Adjustments can be made in the same way for:
• [Targeting Yellow] (Performs correction with respect to Yellow.)
• [Targeting Green] (Performs correction with respect to Green.)
• [Targeting Cyan] (Performs correction with respect to Cyan.)
• [Targeting Blue] (Performs correction with respect to Blue.)
• [Targeting Magenta] (Performs correction with respect to Magenta.)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use E and F to adjust Red.
[Green]: Use E and F to adjust Green.
[Blue]: Use E and F to adjust Blue.
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE (Continued)
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
• 24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals.
Each time E or F is pressed, the setting is switched.
Auto < Off
Press < to store.
Progressive Scan Settings
Screen
• 30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals.
Each time E or F is pressed, the setting is switched.
Auto < Off
Press < to store.
• Jaggies Filter
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace
signals are input, thus enabling a smoother motion picture display.
Each time E or F is pressed, the setting is switched.
Auto < Off
Press < to store.
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting.
Press F: to specify still picture priority.
Press E: to specify motion picture priority.
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING SCREEN POSITION AND SIZE
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page
E-20 for the basic operation procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a
desired input mode before making any changes.
POSITION/SIZE Menu screen
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen to the left.
Vertical position (Vertical)
“Position” adjustment screen
C: Moves screen up.
D: Moves screen down.
Press < to store.
Adjusting Screen Size (Size)
Screen width (Width)
F: Increases width.
E: Reduces width.
Screen height (Height)
“Size” adjustment screen
C: Increases height.
D: Reduces height.
Press < to store.
*You cannot adjust screen size in DVI-D mode.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-20 for the basic operation procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press < to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
AUDIO Menu screen
F: Stronger bass
E: Weaker bass
Press < to store.
Adjusting Volume Balance (Balance)
Press EF to make adjustments.
F: Shifts the volume balance towards the right.
E: Shifts the volume balance towards the left.
Press < to store.
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press E or F, one of the available choices appears in the following sequence:
On < Off
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
• Audio Input menu will not be displayed when “No Audio” is selected. (See P. E-36.)
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS
• FEATURES setup screen has the following 4 options.
See Page E-20 for the basic operation procedures.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-30.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-31.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-32–E-34.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with CD , and then adjust with E F. Finally, press < to implement the adjustments.
Adjustment Item
Contents of Adjustments
Operation
Dot Clock
(mD-sub)
You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the “Dot Clock”.
Use E F to adjust to minimize vertically-
striped pattern in pictures.
Clock Phase
(mD-sub)
Pictures and the outline of letters may blur or flicker as the
clock phase of your PC may be different. In this case, adjust the
clock phase manually. Normally, the automatic setting ensures
the optimal value.
Use E F to adjust to minimize pictures blur.
Use E F to adjust pictures optimally.
Clamp Position
(mD-sub, Comp.
video)
Adjusts the extremely dark or bright pictures. Normally, the
automatic setting ensures the optimal value.
Auto Calibration
(mD-sub)
Adjusts the dynamic range of images to the optimum.
Performed while a white screen signal is received.
Display the Auto Calibration screen and select
Execute, and then use CD to select the
item.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (Continued)
ON SCREEN MENU
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus. (Error messages are
displayed regardless of what choice you make for this option.)
Each time you press E or F, one of the available choices appears in the following sequence:
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
[Off]: Except for menus and error messages, on-screen information is not displayed.
Press < to store.
OSD selection screen
* When the screen is white [On (OSD:dark)], some of the information may be difficult to read.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press <.
The “Language” selection screen will appear.
(2) Press C or D to select your desired language.
English
Español (Spanish)
Français (French)
Português (Portuguese)
Ðóññêèé (Russian) for the R model
“Language” selection screen
(In the case of the W/U model)
(3) Press <.
The menu is displayed in the selected language.
• Selection of indications (Name Select)
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time E F is pressed, the setting is switched. (In the case of VIDEO1)
Press < to store.
RGB input
You can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment.
Each time E F is pressed, the setting is switched. (In the case of RGB 1)
Press < to store.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE INPUT TERMINALS
• Selecting the settings of Video/S-video Input terminal
You can use this option to select the color format appropriate for the input signal.
Each time you press E or F, one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press < to store.
• Selecting the settings of D-SUB Input terminal
Input Terminal Settings Screen
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press <.
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press E or F, one of the available choices appears in the following sequence:
RGB-PC < Decoder
[RGB-PC]: For using RGB for PC
[Decoder]: For using digital broadcast tuner
(3) Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (Continued)
OTHER SETTINGS
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press C D to select the "Time".
Press E F to select the amount of time before the standby state starts.
Press < to store.
* The numerical value is the approximate amount of time before the standby state starts.
You can assign the black or white color for the background color at the no signal state.
Press C Dto select the "Background".
Auto Off-NO SIG. settings
screen
Press E F to select the displayed background displayed.
Black < White
Press < to store.
* The background color changes to assigned color state after approximate 20 seconds at the no signal
state.
•Selecting input terminals (Audio Input)
You can use this option to select the available terminals to receive the audio from input equipment.
(1) Select “Audio Input” and press <.
The “Audio Input” selection screen will appear.
(2) Press C or D to select video input terminal.
(3) Select a related audio input terminal.
Each time you press E or F, one of the available choices appears in the following sequence:
[No audio]: No audio in the corresponding mode.
[Audio 1-3]: Selects Audio 1 through 3 for receiving audio in the corresponding mode.
[Audio 4]: HDMI(for the U model)
“Audio Input” selection screen
(In the case of the U model)
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press < to store.
* Audio Input menu will not be displayed when “No Audio” is selected.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
• Minimizing phosphor burn-in (Screen Orbiter)
for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press <.
The “Screen Orbiter” setting screen will appear.
(2) Press C or D to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press E or F, one of the available choices appears in the following sequence:
“Screen Orbiter” setting screen
[Off]: Disables Screen Orbiter.
[Time]: Moves the pattern approximately every one hour.
[Mode]: Moves the pattern when the power is turned ON or when you switch between modes.
(4) Press C or D to select “Moving Area”.
(5) Press E or F to select the range for moving the pattern.
Each time you press E or F, one of the available choices appears in the following sequence:
[Min.]: Pattern moves in small range. (About 5 pixels)
[Std.]: Pattern moves in moderate range. (About 10 pixels)
[Max.]: Pattern moves in wide range. (About 15 pixels)
(6) Press < to store.
* When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the
screen may be missed.
• Setting RGB Input Signal Compulsorily (Direct Setting)
for RGB
You can use this option to switch the setting for RGB input signal.
Each time you press E or F, one of the available choices appears in the following sequence:
[Auto]: The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal.
Press < to store.
+
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA may not be
automatically distinguished. Switch to the fixed display when the image is not displayed properly.
* Signals that are not applicable depending on the model or input terminals may not be displayed.
• Specifying RGB Input Signal (Code Setting)
for mD-sub input
Normally, use this option in Auto mode.
• Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press E or F, one of the available choices appears in the following sequence:
On < Off
Press < to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (Continued)
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press E or F, one of the available choices appears in the following sequence:
On < Off
Press < to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press <.
The “Information” screen will appear.
[Mode]: Input mode appears at the upper right corner of the screen
[Freq. Scan Mode]: Frequency scanning
[Input Signal]: Video mode
[Input Sync.]: Signal type
Information screen (Video Mode)
[Freq.]: Synchronized signal frequency, polarity
[Preset No.]: RGB code number
Information screen (RGB Mode)
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in the MENU to factory settings.
Press ;.
The main menu screen will appear.
1
Press E or F to select “FACTORY
2
DEFAULT”.
Each time you press E or F, one of the available
menus appears in the following sequence:
“FACTORY DEFAULT” selected
in the main menu screen
PICTURE < POSITION/SIZE < AUDIO < FEATURES <
FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will appear.
Press <.
3
• Displays the message of whether to proceed with the
initialization.
(Ex. the W/R models)
Press C or D to select the Yes.
4
Displays the message of
whether to proceed the
initialization
Press <.
5
• The message of having completed the initialization
will be displayed after initializing.
Press ; when you finish.
6
Displays the message of having
completed the initialization
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display.
Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the
display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.
Cleaning the Cabinet and Remote Control
Use a soft cloth for cleaning.
If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the
stains. Use a soft, dry cloth for final cleaning.
Cleaning the ventilation grille
Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase
the internal temperature of the main unit causing machine failure or fire hazard.
BEFORE OBTAINING SERVICE
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
• Power does not turn ON.
• No pictures are displayed.
Action
• Check whether the power plug is securely inserted into the receptacle.
• Check cables for disconnection.
• Check whether the power for all input equipment is ON.
• Check for connection to wrong terminals or for wrong input mode.
• Check whether the input mode display is colored pink.Special setup may have been made.
Return to original setup or initialize the User adjustment value.
• Remote control does not function prop-
erly.
• Check for incorrect battery orientation.
• Check for dead batteries.
• Check for distance from the display.
• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.
• Check for any obstacle between the remote control and the display.
• The display makes a snapping sound.
• The display makes a buzzing sound.
• This sound is produced when the cabinet expands or contracts due to variations in temper-
ature. This sound does not indicate that the display has a problem.
• The display has fans to maintain the temperature of internal components at a constant
fan)
• There are spots on the screen.
• Degraded colors/tints
• Improper screen position/size
• No audio
• Check whether all picture adjustments have been properly made.
(See “Adjusting Screen Position and Size” on P. E-27.)
• Check cables for disconnection.
• Check whether the proper audio input has been selected.
(See “Audio Input” on P. E-32.)
• If “Out of range” appears, the display is
receiving a signal whose picture or signal
cannot be reproduced by the display.
• The screen turns to black and white.
• Signals that are not supported by this display have been input. Check which signals are
supported. (See the user’s manual (1/2).)
• If “Error message Condition 1” appears,
the fan is defective.
• Remove the power plug from the receptacle, and contact your dealer for repairs.
(Applies to models equipped with a fan)
• If “Error message Condition 2” appears,
the display’s internal components are
extremely hot.
• Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you
turn the power back on, remove the power plug from the receptacle, and contact your
dealer for a repairs.
• If “Change refresh rate to 60Hz” appears,
• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4
(Hz). Change the setting of your PC, etc.
• If the power indicator lamp flashes red or
green.
• Remove the power plug from the receptacle, and inform your dealer about how the lamp
flashed.
The power indicator lamp flashes differently depending on the type of problem.
Note
• Functions may not be available with some models and some device options.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
|