OPERATING INSTRUCTIONS
AUTOMATIC
AUTOMATIC
PERM PRESS / COLORS
REGULAR
PRESS
SAVER
MORE
NORMAL DRY
LESS
DAMP DRY
TEMPERATURE
CYCLE SIGNAL
START
LESS
NORMAL DRY
MORE
KNITS / DELICATES
LOW HEAT
PERM PRESS
COOL DOWN
MEDIUM HEAT
REGULAR
HIGH HEAT
AIR FLUFF
NO HEAT
MORE
NORMAL DRY
COOL DOWN
LESS
20
30
PRESS
SAVER
40
50
TIMED DRY
AUTOMATIC
REGULAR
KNITS / DELICATES
60
2. Check that lint screen is clean and in place.
plastics, orsimilarlytextured, rubber-like materials. Use
Air Fluff-No Heat setting only.
Versión en español
Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131921200.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT temp-
erature settingsmaybe used with anycycle setting. The
AIR FLUFF-NO HEAT setting can be used only in the
Timed Dry cycle.
4. Close the dryer door.
5. Set Temperature and Cycle Signal (some
models) controls.
Spanish Owner's Guides
Frigidaire Home Products
P. O. Box 212378
6. Turn cycle selector clockwise to desired
setting.
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Augusta, GA 30917
7. Start dryer. Push START button for 2 seconds or
turn the START knob clockwise to ON, hold for 1-
2 seconds and release.
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
8. When the Cycle Signal control (some models)
has been turned on, a signal will sound when
the cycle ends.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Each cycle ends with a cool down period. The heat
automaticallyturnsoffand the load continuesto tumble
during the cooldown period. Thisreduceswrinkling and
makes items easier to handle during unloading.
Temperature Selection
Always follow directions on fabric care
labels.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Operating Steps
Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
To avoid fire hazard, do not use heat
to dryitemscontaining feathersordown, foam rubber,
1. Prepare items for drying.
Printed in U.S.A.
(continued, reverse side)
P/N 131921100 (9912)
Download from Www.Somanuals.com. All Manuals Search And Download.
|