75423
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Requires three "D" (LR20) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Long shaft Phillips screwdriver (not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
• Please wipe each part with a clean, dry cloth before assembly.
• Save all packaging material until assembly is complete to ensure that parts are not discarded.
Before First Use
The cooling drawer must be filled with water
and frozen. The drawer lets the kitchen "bake"
the color change treats.
Tabs
2
Cooling
Drawer
Back
Panel
Front
Panel
• Fit the front panel to the back panel.
• Insert two screws through the back panel and into
the front panel. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Fill the cooling drawer with tap water just below the top
of the tubes.
• Place the cooling drawer in your freezer. When the water
in the cooling drawer is frozen, you’re ready to bake.
3
1
Small
Connector
Large
Connector
Top View
• During the assembly you will be making two
electrical connections. Identify the two connectors
coming from the front panel.
Large Connector - Connects to the back panel in the
next step.
Oven Door
Oven Handle
Small Connector - Connects to the counter top in
step 10.
• Open the oven door.
• Fit the oven handle to the oven door as shown.
• Insert two screws through the back of the oven door
and into the handle. Tighten with a Philips screwdriver.
Do not over-tighten.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
4
6
Connector from
Back Panel
Large Front
Panel Connector
Side Panel
with Rectanglular
Opening
Hole
Peg
Main
Assembly
• Fit the side panel with the rectangular opening to
the main assembly. Make sure the pegs in the side
panel fit into the holes in the main assembly.
• Plug the large connector from the front panel into the
connector from the back panel as shown.
• Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
5
Groove
Shelves
7
Hole
Peg
Side Panel
with Oval
Openings
Side Panel
with Oval
Openings
Side Panel
with Rectanglular
Opening
Main
Assembly
• Slide each shelf into the groove in each side panel.
• Fit the side panel with the oval openings to the other
side of the main assembly. Make sure the pegs in the
side panel fit into the holes in the main assembly.
• Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Small Front
Panel Connector
8
10
Counter Top
Stove Top
Connector from
Counter Top
Tab
Slot
Base
Oven Door
• Place the base on a flat surface with the open side
facing up.
• Set the main assembly onto the base. Fit the tabs
on the bottom of the main assembly into the slots
in the base.
• Position the counter top over the main assembly so
that the stove top is over the oven door.
• Plug the remaining small connector from the main
assembly into the connector from the counter top
as shown.
• Press down on the main assembly to "snap" it into
the base.
9
11
Hinge
• Position the refrigerator door with the handles
facing you.
• At an angle, fit the refrigerator door lower peg into the
lower hole in the hinge on the side panel.
• Then, "snap" the refrigerator door upper peg into the
upper hole in the hinge.
• Fit the counter top onto the main assembly.
• Insert 10 screws through the main assembly and into
the counter top. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
1
14
12
1
Pantry
Tab
2
Side Shelf
2
Side Shelf
Tab
Counter Top
• Fit the tab near the top of a side self into the upper
groove in the side of the pantry as shown.
• Press to "snap" the remaining tabs into place.
• Position the pantry over the counter top as shown.
• Fit two large tabs on the pantry into the matching slots
in the counter top as shown.
• Repeat this procedure to attach the other side shelf.
• Gently press down on the top of the pantry to "snap"
Faucet
Handle
it in place.
15
Faucet
Pantry
13
Sink
Sink
Opening
Grooves
Back View
• Place the sink into the sink opening in the counter top.
• Fit the hole in the faucet over the post on the sink as
shown.
• Insert four screws through the grooves in the pantry
and into the counter top. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
• Insert and "snap" the peg on the bottom of the faucet
handle into the faucet as shown.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Battery Installation
16
Battery
Compartment
Door
Oven Dial
Oven
Knobs
• Locate the battery compartment on the back of
the kitchen.
• Insert three "D" (LR20) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer life.
Oven Rack
• Fit the battery compartment door onto the battery
compartment. Tighten the screws in the battery
compartment door with a Phillips screwdriver. Do not
over-tighten.
• When lights, sounds or fan on this toy become faint or
stop, it’s time for an adult to change the batteries!
• Insert and "snap" the oven dial into the center hole in
the counter top.
1.5 V x 3
• Insert and "snap" the oven knobs into the holes on
either side of the oven dial.
"D" (LR20)
• Open the oven door and slide the oven rack into
the grooves inside the oven.
Shown Actual Size
Battery Safety Information
17
Batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leak-
age:
• Do not mix old and new batteries or batteries of differ-
ent types: alkaline, standard (carbon-zinc) or recharge-
able (nickel-cadmium).
• Insert batteries as indicated inside the battery compart-
ment.
Peg
Page
Peg
Cookbook
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
• Insert the peg on one end of the page into the top
hole in the "cookbook."
• Bend the page slightly and insert the bottom tab into
the hole at the bottom of the cookbook.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
7
6
3
4
1
2
5
Proper label application will help keep labels looking their best!
When applying labels, keep the following guidelines in mind:
• Wash hands before applying labels.
• Before applying labels, wipe the surface of the toy with a clean, dry cloth to remove dust or oils.
• For best results, avoid repositioning a label once it has been applied.
• Apply labels as shown in the illustration.
One time assembly is now complete.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s Get Cooking
1
3
Serving
Tray
Power/Volume Switch
• Locate the power/volume switch on the back of
the kitchen.
• Slide the power/volume switch to either on with no
Oven
Rack
music ; on with low volume
volume
; or on with high
.
• Slide the switch to off
in use.
position when the toy is not
• Choose a color change treat you want to bake.
• Place the treat on the serving tray. Set the tray on the
oven rack with the treat directly under the cooling
drawer.
2
Hint: For best performance, be sure the oven rack is
placed in the grooves that position the treat as close as
possible to the cooling drawer.
Grooves
4
Cooling
Drawer
• When you are ready to play, remove the cooling drawer
from your freezer. For best results, be sure it is
completely frozen.
• Slide the cooling drawer into the grooves near the top of
the oven as shown.
Oven Dial
Top View
• Turn the oven dial to turn start "baking."
• Lights flash and music plays as the treat "bakes."
• When the treat is ready (about a minute) the music
stops and you’ll hear a "ding."
• Open the oven and remove your treat. Colored
decorations appear on the treat!
How it works: A fan blows cold air from the cooling
drawer onto the treat and causes it to change color!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints
More Decorating Fun
• Keep the cooling drawer frozen so it’s always
ready to go.
• The color change feature works best at a room
temperature of 68˚ - 74˚ F.
• As the treats warm back up, the color change
gradually disappears. "Bake" the treats again to
change them back.
• In colder rooms, some color change decorations may
not disappear completely. Try warming them by running
them under warm water.
• The color change feature lasts longer if you do not
expose this toy to intense heat or direct sunlight for
prolonged periods of time.
• As the ice melts in the cooling drawer, color changing
will be less visible. Refreeze the cooling drawer.
• When battery power is low, the fan will slow down and
color changing will be less visible. Replace the batteries
with fresh alkaline batteries as described in the battery
installation section.
• Place an ice cube into one of the small bins on either
side of the cookbook.
• Dip the icing bag into melted ice water and dab treats to
change color.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
• Before using the cooking and eating utensils, hand wash them in hot, soapy water.
• Check the plastic parts regularly and if broken or cracked, dispose of them properly.
• Check all screws regularly to be sure they are tight. If the screws are not tight, tighten them as necessary.
• To clean, wipe the surface of this toy with a mild soap and water solution and clean cloth. Rinse clean with water to
remove soap residue. Do not immerse the toy.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user's authority to operate the equipment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.
Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
For other countries outside the United States:
CANADA
Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB, Helpline: 01628 500302.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
75423c-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|