PT-111E / PT-112E & MD-111E
User manual
08-2013/ v1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
H.264 Pan/Tilt IR Network Camera
Overview
PT-111E / PT-112E & MD-111E / PT-112E is a Mini Dome P/T & Fixed dome network
camera.
Law in your country may prohibit the use of surveillance devices. The Network Camera
is not only a high-performance web-ready camera but also can be part of a flexible
surveillance system. It is the user‘s responsibility to ensure that the operation of such
devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the list in
the "Package Contents" chapter. Take notice of the warnings in ―Quick installation guide‖
before the Network Camera is installed, then carefully read and follow the instructions in
the ―Installation‖ chapter to avoid damages due to faulty assembly and installation. This
also ensures the product is used properly as intended.
The Network Camera is accessible via the LAN or Internet connection. Connect your
Network Camera directly to a computer network or DSL modem, and with a standard
Web browser you get instant, on demand video streams. Within minutes you can set up
the Network Camera to capture a video sequence to a PC. Live video image can be
uploaded to a website for the world to see or made available only to select users on the
network.
The Network Camera is a network device and its use should be straightforward for those
who have basic network knowledge.
The Network Camera is designed for various applications including video sharing,
general security/surveillance, etc. The ―How to Use‖ chapter suggests ways to best
utilize the Network Camera and ensure proper operations.
Minimum System Requirement
H.264 Pan/Tilt IR Network Camera
Network Environment
LAN
10/100M Ethernet
Monitoring System Recommended for Internet Explorer
System Hardware
Basic requirements
· CPU: Intel® Celeron® Dual-Core @2.70GHz or above
· Memory Size: 2 GB or above Recommended
· VGA card resolution: 1024 x 768 or above
System Requirement for Viewer & Recorder Application
Support OS
XP, Windows 7
System Hardware
1-4 cameras surveillance application
· CPU: Intel® Celeron® Dual-Core @ 2.70GHz or above
· Memory Size: 2 GB or above
· VGA card resolution: 1024 x 768 or above
3/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Package Contents
If any of the above items are missing, please contact your dealer immediately.
Network Camera (Wired or PoE)
Software CD
Power adapter
Quick installation guide
Screws
RJ45 Female
Note: Using a power supply with a different voltage than the one included with the
Network Camera will cause damage and void the warranty for this product.
4/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
3. Power over Ethernet (PoE)
Using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a
single Ethernet cable. Follow the below illustration to connect the Network Camera to a
PoE-enabled switch via Ethernet cable.
Using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a
non-PoE switch
7/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Connect to the Network Camera
Locate the IP address of Network IP Camera
You can use your new Network IP Camera by its web user interface via web browser.
Currently the viewing system requirement for Network IP camera is:
■ OS: Microsoft Windows XP/Vista/7
■
Browser: IE7, 8, 9 (32Bit)
■ Cell phone: 3GPP player
Note: For best viewing experience we recommend that you use Microsoft
Windows Internet Explorer 7, 8, or 9.
By default, the network camera automatically obtains an IP address from the DHCP
server on your local network. Check your DHCP server‘s IP address lease table to find
the network camera‘s IP address, or use the EdiView Finder utility included in the CD.
Note: We recommend that you use Microsoft Windows to install your network
camera - Mac is not supported.
1. Insert the CD into your CD-ROM drive. When the wizard appears, click ―Setup Utility‖
to install the ―EdiView Finder‖ software.
8/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Note: The contents of the CD-ROM can also be downloaded from the
2. After the installation is complete, double-click the ―EdiView_Finder‖ icon to execute
the application.
3. Press ‗Discover‘ button to search for all IP Cameras on your local network (make
sure all IP Cameras are powered on and connect to local network first). When you
find any IP Camera, you can double click on it or click ‗Link‘ button to connect to it by
your web browser.
If you need to change a certain IP Camera‘s IP address, you can also click on the IP
Camera you wish to change IP address, then click ‗Change IP‘ button to change select
IP Camera‘s IP address setting.
If you no longer need to use this utility, click ‗Exit‘ button to close it.
Please note:
If you have several network connections, such as “Wireless Function”, please disable
the “Wireless Functions” or / and other network connections that is not connected to IP
camera,, or IP finder may fail to search IP camera!
9/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Initial Access to the Network Camera
(1) For the initial access to the Network Camera in Windows, the web browser may
prompt for permission to install a new plug-in for the Network Camera. This plug-in
has been registered for certificate and is used to display the video in the browser.
Users may click on
to proceed.
1. Click “Install” and “Run” ActiveX controls
10/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
2.The video will be displayed.
11/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Primary user’s capability
Main Screen with Camera View
The main page has three parts:
1. Configuration functions: The camera can be configured using these user
interfaces.
2. Pan/Tilt & connection control buttons: These buttons provide the direction to
control the pan and tile of camera.
3. Camera View: What the camera sees.
Click the configuration in the bottom of left column to link to the configuration page.
Configuration functions:
“ePTZ Settings“ Electronic pan/tilt/zoom capabilities that enable users to move to a
target region instantly for close-up shots by simply clicking on the video feeds on their
screen rather than moving the camera physically.
“Client Settings” Clicking on this button links you to the client setting pages, please
check the following session for more details.
“Configuration” Please notes that only the administrator can access it.
“ Language” Click this button to choose a language for the user interface.
Language options are available in: English, traditional Chinese, Simplified Chinese,
Japanese, Spanish, Portuguese, French, German, Italiano.
12/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Camera view:
On the top of image shows the connecting type of the Network Camera and the current
date/time.
View capabilities:
1.
Click this button to capture and save still images. The captured images will be
displayed in pop-up window. Right-click the image and choose Save Picture As to save it
in JPEG format.
2.
The button selection lets you open a digital zoom, and to control the window to
enlarge a specified area in the camera view.
3.
Click this button to switch to full screen mode. Press the ―Esc‖ key to switch back
to normal mode.
4.
5.
6.
Click on this button freeze the video, and playing when you click again.
Click on this button stop video output.
Use this function；you can record video in your PC by browser directly. The files
format will be in MP4. Note: Due to the UAC (User Access Control) function in Windows
Vista or Windows 7, the IE browser would need to be run under the ―Administrator‖
privilege.
7.
8.
Click on this button adjust the audio volume & Latency.
Click on this button switch Mute On/Off.
9.―Go to‖ Once the Administrator has determined the preset positions; the User
can aim the camera using this control.
13/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Pan/Tilt & connection control buttons: (PT-111E / PT-112E only)
1. “Connection” User can choose Remote or Local
mode for best connection quality.
Proposal: Internet environment, switch Remote
mode.
2. “Video Stream” User can choose stream1 or
stream2.
3. “The direction buttons are” ―Left‖, ―Right‖, ―Up‖,
―Down‖, ―Cross Angles‖, and ―Home‖. Camera returns
to center when click ―Home‖ button
4. “Pan Angle” User can choose the angles when
the camera moves left and right each time.
5. “Tilt Angle” User can choose the angles when
the camera moves up and down each time.
6. “Pan” The camera will move from right side to left
side continuously when click the button.
7. “Patrol” The button directs the camera to patrol
among the preset positions in the patrol list, which
can be modified on the “Camera control page”. The
cycle of patrol is from 1 to Unlimited.
8. “Video Tracking” is able to track dynamic
objects within screen video.
14/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Client Setting
1. “Video output setting” Setting video output format.
“Stream” Select use multiple stream video.
“Picture” Select use serial video picture.
2. “Intranet Protocol Options” Setting camera in intranet mode of protocol.
“UDP” Select use UDP protocol connect camera.
“TCP” Select use TCP protocol connect camera.
“HTTP” Select use HTTP protocol connect camera.
3. “Internet Protocol Options” Setting camera in internet mode of protocol.
“UDP” Select use UDP protocol connect camera.
“TCP” Select use TCP protocol connect camera.
“HTTP” Select use HTTP protocol connect camera.
4. “Recording options” Users can record live video as they are watching by
clicking
start MP4 Recording on the main page. Here, you can specify the
storage destination and file name.
15/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
“Folder” Specify the storage destination for the recorded video files.
“File name prefix” Enter the text that will be appended to the front of the video
file name.
“Add date and time suffix to file name” Select this option to append the date
and time to the end of the file name.
NOTE：Protocol Options which allows choices on connection protocol between client and
server. There are three protocols choices to optimize your usage – UDP,TCP,HTTP.
The UDP protocol allows for more real-time audio and video streams. However, some
packets may be lost due to network burst traffic and images may be obscured.
The HTTP protocol allows for less packet loss and produces a more accurate video
display. The downside with this protocol is that the real-time effect is worse than that with
the UDP protocol.
The TCP guarantees the complete delivery of streaming data and thus provides better
video quality. However, the real-time effect is not as good as that of the UDP protocol.
If no special need is required, UDP protocol is recommended. Generally speaking, the
client choice will be in the order of UDP → HTTP. After the Network Camera is
connected successfully, ―Protocol Option‖ will indicate the selected protocol. The
selected protocol will be recorded in the user's PC and will be used for the next
connection. If the network environment is changed, or the user wants to let the web
browser to detect again, manually select the UDP and TCP protocol, save, and return
HOME to re-connect.
16/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Definitions in Configuration
Please note that only the Administrator can access the system configuration.
System parameters
Firmware version
1. “General Setting”
(1) “Host name”
The text displays the title on the top of the main page.
(2) “LED indicator”
Select turn on or turn off the led indicator.
17/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
2. “Time Setting”
(1) “Time zone”
Choose a time zone from the down arrow.
(2) “Daylight saving”
For summertime; It will be one hour ahead.
(3) “Current Time”
Network camera set the current time.
(A) “Keep current date and time”
Click on this to keep the current date and time of the Network Camera. An internal
real-time clock maintains the date and time even when the power of the system is
turned off.
(B) “Sync with computer time”
Synchronize the date and time in the Network Camera according to the local
computer.
(C) “Manual”
Adjust the date and time by the Administrator.
(D) “Adjust by NTP server”
Synchronize the time according NTP server over the Internet whenever the Network
Camera is switched on. It fails if the assigned time-server cannot be found.
(a) “NTP server” Assign the IP address or domain name of the time-server.
Leaving the text box blank connects the Network Camera to the default
time-servers.
(b) “Update interval” Select 0 ~ 23 hours update with the time on the NTP
server.
Remember to click on “Finish” to immediately validate the changes. Otherwise, the
correct time will not be synchronized.
18/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Security
Security setting
The administrator account name is ―root‖, which is permanent and can not be deleted.
If you want to add more accounts in the Manage User column, please set a password for
the ―root‖ account first.
1. “Change root password” Change the Administrator‘s password by typing in the
new password identically in both text boxes. The typed entries will be displayed as
asterisks for security purposes. After pressing “finish”, the web browser will ask the
Administrator for the new password to access.
2. “Manage privilege” You can modify the manage privilege of operators or viewers.
Check or uncheck the item, then click finish to enable the settings.
3. “Manage user”
(1) “Add a new user” Administrators can add up to 20 user accounts.
(A) Input the new user‘s name and password.
(B) Select the privilege level for the new user account. Click Finish to enable the
19/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
setting.
(2) “Delete a user” Select an existing user name. Click Finish to enable the
setting.
(3) “Update a existing user” Select an existing user name. Administrators can
modify user‘s password and privilege. Click Finish to enable the setting.
Access rights are sorted by user privilege (Administrator, Operator, and Viewer). Only
administrators can access the Configuration page. Operators cannot access the
Configuration page but can use the URL Commands to get and set the value of
parameters. Viewers access only the main page for live viewing.
20/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Network
Any changes made on this page will restart the system in order to validate the changes.
Make sure every field is entered correctly before clicking on “finish”
Network Setting
“LAN” & “PPPoE”
The default type is LAN. Select PPPoE if using ADSL
1. LAN
The default status is Get IP address automatically. This could be tedious to perform
software installation whenever the Network Camera starts. Therefore, once the network
is set, especially for the IP address should be entered correctly. Select Use fixed IP
address then the Network Camera will skip installation. The Network Camera will
automatically restart and operate normally after a power outage. You can run IP installer
to check the IP address assigned to the Network Camera if the IP address is forgotten,
21/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
or you can use the UPnP function provided by the Network Camera (MS Windows XP
provides UPnP function at My Network Place).
(1) “Get IP address automatically”
(2) “Use fixed IP address”
- “IP address”: This is necessary for network identification.
- “Subnet mask”: This is used to determine if the destination is in the
same subnet. The default value is ―255.255.255.0‖.
- “Default router”: This is a gateway used to forward frames to
destinations in a different subnet. Invalid router setting will fail the
transmission to destinations in different subnet.
- “Primary DNS”: The primary domain name server that translates
hostnames into IP addresses.
- “Secondary DNS”: Secondary domain name server backups the Primary
DNS.
- “Enable UPnP presentation & port forwarding”: Enable UPnP ability.
- “Http port” This can be typed besides the default Port 80. Once the port is
changed, the users must make sure the change for the connection is successful.
For instance, when the Administrator changes the HTTP port of the Network
Camera which IP address is 192.168.0.20 from 80 or 1025 to 65535, the users
―http://192.168.0.20‖.
- “RTSP Port” RTSP port can be typed besides the default Port 554
- “RTP Port” The RTP port can be typed besides the default Port 54
Note:Please set Video RTP port in even number after default value port 54. Then,
Video RTCP pot、Audio RTP port、Audio RTCP port will automatically set the
values in ascending.
- “RTSP Streaming access names” The RTSP streaming currently supports
video only, audio only, and audio/video. To use the audio/video stream, type the
URL as―rtsp://61.30.125.43/liveN.sdp‖.
2. PPPoE
If using the PPPoE interface, you should fill the following settings from ISP.
(1) “User name”: The login name of PPPoE account
(2) “Password”: The password of PPPoE account
(3) “Confirm password”: Input password again for confirmation
DDNS Setting
1. “Enable DDNS” This option turns on the DDNS function.
2. “ip-discovery” In the Register column, fill in the Host name (xxxx.ip-discovery),
Email, Key, and Confirm Key, then click Register. After a host name has been
successfully created, a success message will be displayed in the DDNS Registration
Result column and messaging E-mail.
3. “3rd party DDNS” This is enable or disable 3rd party DDNS.
4. “Provider” The provider list contains hosts that provide DDNS services. Please
connect to the service provider‘s website to make sure the service charges.
5. “Host Name” If the User wants to use DDNS service, this field must be filled.
Please input the hostname that is registered in the DDNS server.
22/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
6. “User name” The Username or E-mail field is necessary for logging in the DDNS
server or notify the User of the new IP address.
Note: when this field is input as ―User name‖, the following field must be input as
―Password‖.
7. “Password” Please input the password or key to get the DDNS service.
8. “finish” Click on this button to save modify settings for the DDNS service.
23/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Access list
Access list setting
1. “Add denied address” This rule allows the user to assign a range of IP
addresses to the Deny List.
2. “Delete denied address“ Delete IP address list from the Address List.
24/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
(2) “Mirror” Horizontally rotates the video.
3. “Environment” The orientation of video
(1) “indoor” This option is usually selected when the Network Camera is placed
in indoor environments.
(2) “outdoor” This option is usually selected when the Network Camera is placed
in outdoor environments.
4. “Power freq.” Select 50 Hz or 60Hz power line frequency.
※The fluorescent light will flash according to the power line frequency that
depends on local utility. Change the frequency setting to eliminate uncomfortable
flash image when the light source is only fluorescent light.
Video Setting
1. “Contrast” Adjust the image contrast level, which ranges from -5 to +5. The default
value is set to 0.
2. “Brightness” Adjust the image brightness level, which ranges from -5 to +5. The
default value is set to 0.
3. “Saturation” Adjust the image saturation level, which ranges from -5 to +5. The
default value is set to 0.
4. “Sharpness” Adjust the image sharpness level, which ranges from -5 to +5. The
default value is set to 0.
5. “EV” Exposure value represent the expected target value of the luminance of
the weighting result of AE windows in the image and its tolerance as offset.
6. “Gain” In the slide bar of Gain, there are also two sliders, which represent the
limitations to control the maximum gain value and the minimum one, respectively.
Normally, the minimum value is to 1x for better quality.
Infrared Led Setting
1. “Infrared LED Control” IR led for Day and Night (Option). User can turn on/off
the built-in IR led. This function is very useful under low illumination environment.
(1) “Auto” Select IR sensitivity from 0 to 4.
(2) “Manual” Turn on/off the IR led manually.
- “Turn on” Turn on led
- “Turn off” Turn off led
2. “Low lux mode” The video quality will be improved when the camera is in low
lux environment.
(1) “Disable dark mode” Disable low lux mode.
(2) “Enable dark mode” Enable low lux mode.
Audio Setting
1. “Mute” Audio mute.
2. “Microphone ” Internal microphone.
3. “Mic Volume” Adjust microphone volume, which ranges from 1 to 64.
26/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Video record
Schedule mode
(1) “Every day” Enable/Disable every day application.
(2) “Week day” Enable/Disable week day application.
(3)“Selected day” Enable/Disable selected day application.
Schedule information
(1) Enter the “Start time” and “Stop time” for day mode.
Note that the time format is [hh:mm] and is expressed in 24-hour clock time. By
default, the start and end time of day mode are set to 01:00:00 and 23:59:59.
(2)“Sun”/“Mon”/“Tue”/“Wed”/“Thu”/“Fri”/“Sat” Select the days of the
week to perform the application.
(3) ―Start day‖ and ―Start time‖ as the start timing the time. ―End day‖ and
―End time‖ as the end timing the time
(4) “Enable cyclic recording” The cyclic recording function is enabled, during the
transaction stage when a storage space is full and the incoming streaming data is about
27/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
to overwrite the previously saved videos.
Record parameters
(1)Source: Select a stream for the recording source.
(2)Recording interval: Select the recording time interval.
(3)Prefix file name: You can setting the file name, and enable or disable to
add the date and time on file name.
Response mode There are two choices of server types available: NAS, Micro SD
Card. Select the item to display the detailed configuration options.
(1)”NAS”
--“NAS server address” Enter IP address of the NAS server.
--“NAS shared directory” Enter the NAS shared directory path.
--“Workgroup” Enter the NAS workgroup parameter.
--“User account” Enter the login name of the NAS account.
--“User password” Enter the password of the NAS account.
28/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Stream
Audio codec setting
(1)“Audio codec type” There are two choices of audio codec types
available: ”AMR”、 “AAC” and ”G.711”.
(2) “Bit rate”
-- “AMR” The bit rates are selectable at the following rates:
4750,5150,5900,6700,7400,7950,10200 and 12200.
-- “AAC” The bit rates are selectable at the following rates:
8Kbps,16Kbps, 24Kbps and 32Kbps.
-- “G.711” pcmu and pcma.
Video codec setting
(1) “Select Stream” The Network Camera supports “Stream 1”and “Stream 2”.
29/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
(2) “Video codec” The Network Camera supports three kind of video
compression mode: “H.264” or “MPEG4‖ or “MJPEG”. User can choose one of
these compression modes based on requirement or application
(3) “Video size” Click the down arrow to choose the quality of image
(4) “Connection type” User can select this button to choose the better video
& links quality. (Internet mode or Intranet mode)
(5) “Frame rate” This limits the maximal refresh frame rate per second. Set the
frame rate higher for a smoother video quality.
(6) “Intra frame period” Determine how often to plant an ―I frame‖. The shorter
the duration, the more likely you will get a better video quality, but at the cost of
higher network bandwidth consumption.
(7) “Video Quality type” Setting optimizes bandwidth utilization and video quality.
-- “Constant bit rate” User can adjust the video quality from 20 Kbps to 12
Mbps.
-- “Fixed quality” user can select from lowest quality to get best quality
according. The ―Quality‖ are selectable at the following rates: From 1 to 20.
Snapshot and time display setting
Adjust the photo size specifications and choose whether to mark time on
the video and photo.
30/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Camera control (PT-111E / PT-112E only)
Camera control
The pan and tilt functions can be controlled with these buttons. The “Left” button
controls the camera to the left; the “Right”, “Up”, and “Down” buttons control the
camera accordingly.
(1) “UL”, “UR”, “LL” and “LR” buttons control the camera to an oblique angle.
And “Home” button controls the camera to the center.
(2)“Pan angle” This sets the range of the horizontal movement of the camera. The
larger value is setting, the larger movement of “Left” or “Right” is performing by the
camera.
31/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
(3) “Tilt angle” This sets the range of the vertical movement of the camera. The
larger value is setting, the larger movement of “Up” or “Down” is performing by the
camera.
(4) “Patrol cycle” It is the cycle of patrol function.
(5) “Auto pan speed” This defines the speed of auto panning. The larger value is
setting, the faster speed will run by the camera.
(6) “Auto patrol speed” This defines the speed of auto patrol. The larger value is
setting, the faster speed will run by the camera.
Preset point setting
(1) “Set the home position”
--“Set default value as home position” Restore home position to original
default‘s home by clicking on this button.
--“Set the current position as home position” Click on the button will set the
current aimed position as home of the Network Camera. Each time the Network
Camera reboots or finishes calibration, it will automatically aim to the defined home
position
(2) “Set the auto pan range”
--“Set default value as auto pan range” Restore auto pan range to original
default‘s auto pan range by clicking on this button.
--“Set the auto pan range manually” Click on the button will set the auto pan
range of the Network Camera.
(3)” Add or delete a preset point”
--“Add current point as a preset point” If the User wants to save the current
view as a preset location, enter a name to each of the current video view on
“Preset points” and click on the “Finish” button. The camera allows for 20
preset locations.
--“Delete a preset point from below” This keeps a list for preset positions.
Clicking on the “Finish” button will remove the current selected position
from the preset list.
Patrol list setting
(1) ”Preset points” The preset points box list all preset points. User must use
to drag the preset points to “Patrol list” box when the action is recognized
the “Patrol list” box change to red.
(2) “Patrol list” The Patrol list box list all patrol points. User use the drag to
adjust of the patrol point (Up or down). Dwelling time (sec)” The stop time of
each preset location during auto patrols of the Network Camera.
(3) “Remove patrol point” The remove patrol point box will remove the patrol
point.
32/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Application
Schedule mode
(1) “Every day” Enable/Disable every day application.
(2) “Week day” Enable/Disable week day application.
(3) “Selected day” Enable/Disable selected day application.
Schedule information
(1) Enter the “Start time” and “Stop time” for day mode.
Note that the time format is [hh:mm:ss] and is expressed in 24-hour clock time. By
default, the start and end time of day mode are set to 01:00:00 and 23:59:59.
(2) “Sun”/“Mon”/“Tue”/“Wed”/“Thu”/“Fri”/“Sat” Select the days of the
33/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
week to perform the application.
(3) ―Start day‖ and ―Start time‖ as the start timing the time. ―End day‖ and
―End time‖ as the end timing the time
Trigger mode
(1) “Video motion detection” Enable/Disable video motion application
(2) “Periodically” This option allows the Network Camera to trigger
periodically for every other defined minute.
(3) “Video Tracking” is able to track dynamic objects within screen video.
*(PT-111E / PT-112E only)*
parameters
(1) “Motion parameters”
Higher sensitivity and small threshold will allow easier motion detection.
(2) “Period parameters” This option allows the Network Camera to trigger
periodically for every other defined seconds. Up to 999 seconds are allowed.
Media mode
There are three choices of media types available: “Snapshot”,” Generate digital
output signal”, ―Record(Motion Detection only)” and “System log”.
Snapshot & Record file setting
You can setting the file name, and enable or disable to add the date and time
on file name. Can setting the digital output duration seconds.
Response mode
There are five choices of server types available: Email, FTP, NAS, SD Card, and USB
storage. Select the item to display the detailed configuration options.
(1)“Email”
-- “Email security mode” : If your SMTP server requires a secure connection
(SSL or TLS), check This server requires a secure connection (SSL or TLS).
-- “Sender email” address: Enter the email address of the sender.
-- “Recipient email” address: Enter the email address of the recipient.
-- “Server address” Enter the domain name or IP address of the email
server.
--“User name” Enter the user name of the email account if necessary.
--“Password” Enter the password of the email account if necessary
--“Server port” The default mail server port is set to 25. You can also
manually set another port.
(2)”FTP”
-- “Server address” Enter the domain name or IP address of the FTP server.
-- “Server port” By default, the FTP server port is set to 21.
-- “User name” Enter the login name of the FTP account
-- “Password” Enter the password of the FTP account.
-- “FTP folder name” Enter the folder where the media file will be placed. If
the folder name does not exist, the Network Camera will create one on the FTP
server.
(3)”HTTP ”
-- “URL” Enter the URL of the HTTP server.
34/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
-- “User account” Enter the user name if necessary.
-- “User password” Enter the password if necessary.
(4)”NAS”
--“NAS server address” Enter IP address of the NAS server.
--“NAS shared directory” Enter the NAS shared directory path.
--“Workgroup” Enter the NAS workgroup parameter.
--“User account” Enter the login name of the NAS account
--“User password” Enter the password of the NAS account.
35/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Storage
Manage the storage device.
Storage Status
Here show the storage device information.
NAS server setting
(1) ―NAS Host name‖ Choose and input the NAS Host name of this camera.
(2) ―Workgroup‖ Input the name of Workgroup. You can see the NAS Host name
you input in the same workgroup with your PC. Then you can connect to this
device and download the files easily from SD card which is inserted to this
36/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
camera.
File operation
Move the mouse over the file. Press the mouse right button that Right-click menu is
displayed. You can delete files.
Move the mouse over the directory. Press the mouse left button that the file structure
expand. Press the mouse right button that Right-click menu is displayed. You can
choose upload or delete files.
NOTE：Allow the user to upload or delete files when the storage device is not write-
protected. If the SD card can‘t be detected, please link to the following URL:
formatting your SD card.
37/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Syslog
The Network camera supports log the system messages on remote server.
The protocol is compliant to RFC 3164. If you have external Linux server with sys log
service, use ―-r‖ option to turn on the facility for receiving log from remote machine. Or
you can use some software on Windows that is compliant to RFC 3164. An example is
Kiwi Syslog Daemon. Visit http://www.kiwisyslog.com/kiwi-syslog-daemon-overview/.
Check “Setup‖ and ―Enable‖ then input the “IP address‖ and “port” number of the log
server to enable the remote log facility.
In the “Current log”, it displays the current system log file. The content of the log
provides useful information about configuration and connection after system boot- up.
“finish” Click on this button to save modify settings.
38/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Status and Parameters
User can find a lot of information about the system such as “Upnp port forwarding”,
“Traversing NAT”, “Public IP”, and so on. User also can get the number of current
viewer of the Network Camera here.
39/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Maintenance
1. “Reboot system” The “Reboot” button will reboot the Network Camera. It‘s useful
while the Network Camera got problem.
2. “Restore system” Click on ―Restore‖ button on the configuration page to restore
the factory default settings. Restore all settings to factory default except settings in
―Network type ‖ and ―Root Password‖. The system will restart and require the installer
program to set up the network again.
3. “Calibrate” Recalibrate the home position to the default center to recover the
tolerance cased by some external forces. Please note that there is no confirming
message box after clicking on the “Calibrate” button, the Network Camera will calibrate
immediately.
40/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
4. “Export/Import file”
-- Export setting backup file: Click to export all parameters for the device and
user-defined scripts.
-- Upload setting backup file: Click Browse… to upload a setting backup file. Please note
that the model and firmware version of the device should be the same as the setting
backup file. If you have set up a fixed IP or other special settings for your device, it is not
suggested to upload a settings backup file.
5. “Upgrade firmware” Select the firmware file and click upgrade button. Please be
aware that you should not turn off the power during updating the firmware and wait for
finish message.
Warning: The upgrade firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the procedure, it might possibly
cause serious damage to the Network Camera.
Note: When upgrade firmware please wait for 90~210 seconds, and then you can
connect to Network Camera again. The system will restart and require the
installer program to set up the network again.
41/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Appendix
A. Troubleshooting & Frequently Asked Questions
Q1: Status led does not light up.
A1: First, make sure that「Configuration>System>Turn off the LED indicator」is disabled.
If it is, check the item, and the led should light up. Second, if red led does not light up,
please check that the power adapter in the package is plugged correctly. And last, if
green led does not light up; please check that category 5 UTP cable is plugged correctly.
If the problem is still not solved, please contact your dealer for further help.
Q2: What kind of Ethernet cable is used by network camera?
A2: The network Camera uses Category 5 UTP cable allowing 10 and/or 100 Base-T
networking.
Q3: The Network Camera will be installed and work if a firewall exists on
the network?
A3: There are two way to set up the IP camera at Internet.
(1) By UPnP Port Forwarding
1. Select an IP router. It must support UPnP port forwarding and enable this function
first!!
2. Connect camera RJ45 cable to IP router and the router is also connected to Internet.
3. Plug power cord to camera.
4. Go to camera Network page. Enable UPnP port forwarding
5. Check camera status, we can see the ports had been successfully opened!
42/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
6.Type IP address:8080 at browser. Then you can see camera through Internet.
7.You can also type the ddns name at below label of camera on browser URL field. For
example, you may type ah00001.ip-discovery.com:8080.
(2) By Setting Port Forwarding Manually
1. Select a router. Set the port forwarding as following.
43/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
PS. Port 80 is HTTP Port, port 53 is stream port, port 554 is RTSP port. and port 443 is
HTTPS port.
2.Go to camera Network page. Disable UPnP port forwarding function.
44/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
3. Type IP address at browser. Then you can see camera through Internet.
4. You can also type the ddns name at below label of camera on browser URL field. For
example, you may type ah00001.ip-discovery.com.
Note: The firewall software at PC may block the transfer of network camera.
Please remove or stop the kind software.
Q4: How can I find the network camera in the local area network?
A4: By using the IP Finder2 program or using UPnP to find it.
Q5: IP Finder2 program cannot find Network Camera in the local area
network at first time?
A5: Make sure the subnet of network camera is same as your PC. If the local area
network supports DHCP, the camera is ―Get IP address automatically‖ in the ―Network‖
page default. If the local area network does not support DHCP, change your PC IP
address to ―192.168.0.xxx‖.
Q6: How can I restore the network camera to default value?
A6: Use a gem clip to press on the inside button. Network camera begins to restore
45/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
default value. You can also press the button “Factory” in ―Maintenance‖ page to restore
the default value.
Q7: I cannot play the recorded video file.
A7: Install the audio codec in the CD, and use the Windows Media Player 10 or later to
play the *.ASF or *.AVI file recorded by the network camera.
Q8: Infrared led does not light up?
A8: Check「Configuration>Audio and Video>Infrared LED Control」 is “Auto” or
“Manual》Turn on”.
Q9: The network camera cannot focus accurately.
A9:
(1) The lens is dirty or dust is attached. Clean the lens with lens cleaner. And then adjust
the camera focus manually.
(2) The image may be out of focus. If the object is too near, move the object away from
Network Camera.
Q10: The cover of network camera is warm. Is it normal?
A10: Network camera is a precision device. The internal material has the operational
temperature, and it is normal when user touch the cover feels warm. It is recommended
to put the network camera at aired place, and not put at any other device.
Q11: What is the scope of wireless network camera connecting AP?
A11: The scope of wireless connection is different form the environment. The possible
interference is (1) the direction of antenna (2) the material and architecture of building (3)
the temperature of environment (4) the position of the network camera.
Q12: The process of upgrade firmware abort.
A12: Contact your dealer for further help.
Q13: Cannot access the login page and other web pages of Network
46/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Camera from Internet Explorer
A13:
• May be due to the network cable. Try correcting your network cable and configuration.
Test the network interface by connecting a local computer to the Network Camera via a
crossover cable.
• Make sure the Internet connection and setting is ok.
• Make sure enter the IP address of Internet Explorer is correct. If Network Camera has
a dynamic address, it may have changed since you last checked it.
• Network congestion may prevent the web page appearing quickly. Wait for a while.
The IP address and Subnet Mask of the PC and Network Camera must be in the same
class of the private IP address on the LAN.
• Make sure the http port used by the Network Camera, default=80, is forward to the
Network Camera‘s private IP address.
• The port number assigned in your Network Camera might not be available via Internet.
Check your ISP for available port.
• The proxy server may prevent you from connecting directly to Network Camera, set up
not to use the proxy server.
• Confirm that Default Gateway address is correct.
• The router needs Port Forwarding feature. Refer to your router's manual for details.
• Packet Filtering of the router may prohibit access from an external network. Refer to
your router's manual for details.
• Access Network Camera from the Internet with the global IP address of the router and
port number of Network Camera.
• Some routers reject the global IP address to access Network Camera on the same
LAN. Access with the private IP address and correct port number of Network Camera.
• When you use DDNS, you need to set Default Gateway and DNS server address.
• If it‘s not working after above procedure, reset Network Camera to default setting and
installed it again.
• Maybe the IP Address of the Network Camera is already being used by another device
or computer.
• If the problem is not solved, the Network Camera might be faulty. Contact your dealer
for further help.
47/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
ip-discovery.com(Free DDNS service)
1. When you want to connect the network camera over Internet, you can use the
service ―ip-discovery.com‖. The ―ip-discovery.com‖ is a free DDNS server for this
camera. Make sure that the router must start UPnP and DHCP server functions.
You can get the domain name which you wish very easily after registration. In
Network page—DDNS settings of this camera, you just input the host name you
want and your e-mail address, and click ―Register‖, then you can have the
hostname for this camera not longer than 20 seconds if the DDNS registration
result is OK. Then you can connect to this ip camera by
*XXX: the host name you type
*@@@@: The HTTP port (get it automatically by ip-discovery server)
User password: Default the password is last six number of the MAC. To change
―root‖ password at ―Security configuration‖ can change the user password, This
―User password‖ is entered in the ip-discovery.com Password.
Note: You must set the ports between your router and camera manually if the registration
is failed.
48/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
2. The free server is acted as an internet IP finder. For more services from the free
Server, just running IE browser and input the host name http://ip-discovery.com/
Select language.
49/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Current device
In other cameras in the same registered e-mail will become a group.
50/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human
proximity to the antenna shall not be less than 2.5cm (1 inch) during normal operation.
Federal Communications Commission (FCC) RF Exposure Requirements
SAR compliance has been established in the laptop computer(s) configurations with PCMCIA
slot on the side near the center, as tested in the application for certification, and can be used in
laptop computer(s) with substantially similar physical dimensions, construction, and electrical
and RF characteristics. Use in other devices such as PDAs or lap pads is not authorized. This
transmitter is restricted for use with the specific antenna tested in the application for certification.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and
telecommunication terminal equipment and the mutual recognition of their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications
Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it.
However, special attention must be paid to the dangers of electric shock and static electricity
when working with electrical equipment. All guidelines of this and of the computer manufacture
must therefore be allowed at all times to ensure the safe use of the equipment.
51/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria,
Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also
authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None
52/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
EU Declaration of Conformity
English:
French:
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2004/108/EC.
Cet équipement est conforme aux exigences essentielles et autres
dispositions de la directive 2004/108/EC.
Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými
ustanoveními směrnic 2004/108/EC.
Polish:
Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi
warunkami określonymi Dyrektywą UE 2004/108/EC.
Romanian: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi
relevante ale Directivei 2004/108/EC.
Russian:
Magyar:
Türkçe:
Это оборудование соответствует основным требованиям и положениям
Директивы 2004/108/EC.
Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó
irányelveknek 2004/108/EC.
Bu cihaz 2004/108/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Ukrainian: Обладнання відповідає вимогам і умовам директиви 2004/108/EC.
Slovakian: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia
smerníc 2004/108/EC.
German: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien
2004/108/EC.
Spanish:
Italian:
Dutch:
El presente equipo cumple los requisitos esenciales de la Directiva
2004/108/EC.
Questo apparecchio è conforme ai requisiti essenziali e alle altre
disposizioni applicabili della Direttiva 2004/108/EC.
Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde
bepalingen van richtlijn 2004/108/EC.
Portugese: Este equipamento cumpre os requesitos essênciais da Directiva
2004/108/EC.
Norwegian: Dette utstyret er i samsvar med de viktigste kravene og andre relevante
regler i Direktiv 2004/108/EC.
Swedish: Denna utrustning är i överensstämmelse med de väsentliga kraven och
övriga relevanta bestämmelser i direktiv 2004/108/EC.
Danish:
Dette udstyr er i overensstemmelse med de væ sentligste krav og andre
relevante forordninger i direktiv 2004/108/EC.
Finnish:
Tämä laite täyttää direktiivien 2004/108/EC oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
--------------------------------------------------------------------------------------------
53/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
---------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or
general waste. It should be handed over to the applicable collection point for the
recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version 2. The program is
free software and distributed without any warranty of the author. We offer, valid for at least three years,
to give you, for a charge no more than the costs of physically performing source distribution, a complete
machine-readable copy of the corresponding source code.
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm
ist eine sog. „Free Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur
Verfügung. Wir bieten Ihnen für einen Zeitraum von drei Jahren an, eine vollständige maschinenlesbare
Kopie des Quelltextes der Programme zur Verfügung zu stellen – zu nicht höheren Kosten als denen, die
durch den physikalischen Kopiervorgang anfallen.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is
not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of
the Free Software Foundation’s software and to any other program whose authors commit to using it.
(Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask
you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the
recipients all the rights that you have. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights.
54/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by
others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free
use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The ‘“Program’“, below,
refers to any such program or work, and a ‘“work based on the Program’“ means either the Program or
any derivative work under copyright law: that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the
absence of any warranty; and give any other recipients of the Program a copy of this License along with
the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on
the Program, and copy and distribute such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files
and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it,
when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty
(or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the
Program itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
55/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a
charge no more than your cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding
source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major components (compiler, kernel, and
so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place counts as distribution of the
source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain
in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants
you permission to modify or distribute the Program or its derivative works. These actions are prohibited
by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and all its terms and
conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients’
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to
this License.
56/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For
example, if a patent license would not permit royalty-free redistribution of the Program by all those who
receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or
to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the
free software distribution system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through that system in reliance on
consistent application of that system; it is up to the author/donor to decide if he or she is willing to
distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this
License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License may add
an explicit geographical distribution limitation excluding those countries, so that distribution is permitted
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this
License which applies to it and ‘“any later version’“, you have the option of following the terms and
conditions either of that version or of any later version published by the Free Software Foundation. If the
Program does not specify a version number of this License, you may choose any version ever published by
the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
57/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Camera User’s Manual
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
58/59
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|