DVP508
Document Camera
User Manual
[Important]
To download the updated quick start guide,
multilingual manuals, software, and drivers,
please visit Dukanes website at
430-DVP508-User manual-00
English - 0
Download from Www.Somanuals.com. All Manuals Search And Download.
8.21 Using a SD card ...............................................................................31
Chapter 10 Packing the Machine ...................................................................40
Chapter 11 Troubleshooting...........................................................................41
Attachment 1....................................................................................................43
English - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyrights © Dukane Audio Visual Products. All rights reserved.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Dukane Audio Visual Products unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Dukane. hereby reserves
the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Dukane Audio Visual Products is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487
Fax 630-584-5156
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the Document Camera:
1. Do not place Document Camera in tilted position.
2. Do not place the Document Camera on an unstable trolley, stand or table.
3. Do not use the Document Camera near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the Document Camera. If you are not sure
of the type of power available, consult your dealer or local electricity company for
advice.
6. Place the Document Camera on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the Document Camera where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They provide ventilation
and prevent the Document Camera from overheating. Do not place the Document
Camera on a sofa, rug or other soft surface or in a built-in installation unless proper
ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the Document Camera.
13. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the Document Camera during thunderstorms or if it is not going to be used for
an extended period, do not place the Document Camera or remote control on top of
heat-emitting equipment or heated objects such as a car and etc.
15. Unplug the Document Camera from the wall outlet and refer serving to licensed
service personnel when the following situations happen:
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the Document Camera has been exposed to rain or
water.
<Note>: Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used batteries.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to
rain or moisture.
This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that
the plug will fit into the power outlet. Do not try to disable this safety feature.
If the Document Camera will not be used for a long period of time unplug it from the power
outlet.
Note
RISK OF ELECTRIC SHOCK
Note: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that this
equipment may contain
dangerous voltage which could
cause electric shock.
This symbol indicates that there
are important operating and
maintenance instructions in this
User Manual with this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A or B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It
is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio interference, in
which case the user may be required to take adequate measures. The typical use is in a
conference room, meeting room or auditorium.
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Package Content
DVP508
Quick Start Guide
Download and Safety
Instruction
C-Video Cable
Power Adapter
VGA Cable
USB Cable
Audio cable
Power Cord
Remote Control
Microscope Adapter
Appearance may vary with
country/region
Remote Control Holder
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Product Overview
9
1
3
6
2
5
3
10
7
8
4
1.
3.
Lens
2.
4.
Camera arm
Backlight
Auxiliary floodlight and
lamp arm
5.
7.
9.
Remote Control Holder
SD card slot
6.
8.
DIP Switch Settings
Control Panel
Remote sensor
10. Input/output port
3.1 Relative Operation Position
Projector
Computer
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Connecting to a Projector or Monitor
VGA Cable
Power
Adapter
Power
Cord
Monitor or
Projector
Power Outlet
4.3 Connecting to a Computer and Use Dukane Software
or an Interactive Whiteboard (IWB)
Projector
Power
Adapter
USB Cable
VGA Cable
Power
Cord
USB Cable
Power Outlet
Computer
Drivers and software can be downloaded from the Dukanes website.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Connecting to a Projector, 2 PCs, and a Monitor at the
Same Time
Power
Adapter
VGA
Cable
VGA
Cable
VGA
Cable
VGA
Cable
Power
Cord
(Default)
Power Outlet
Projector
button to switch the image sources.
Monitor
Computer (1) Computer (2)
Press
For VGA 1 setting, refer to 8.3 I would like to switch image sources.
For VGA 2 setting, refer to 8.2 I would like to set the image source of VGA OUT2.
4.5 Connecting to a TV
DIP Switch Settings
Power
C-Video
Adapter
Cable
Power
Cord
Power Outlet
NTSC: U.S.A., Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and Mexico.
PAL: Countries/regions not listed above.
Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the
frequency in actual use, please refer to the manual. (Attachment 1)
You must re-start for DIP switching configuration to take effective.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
<Note>: It doesn’t support C-Video and VGA simultaneously. Once C-Video is on,
VGA OUT is not supported.
4.6 Connecting to DVD and display DVD images
Press
button to switch the image source.
For VGA 1 setting, refer to 8.3 I would like to switch image sources.
For VGA 2 setting, refer to 8.2 I would like to set the image source of
VGA OUT2.
4.6.1 C-Video
VGA Cable
Audio
Cable
Power
Adapter
C-Video Cable
Power
Monitor or
Projector
Cord
Power Outlet
DVD
4.6.2 S-Video
VGA Cable
Power
Adapter
Audio
Cable
S-Video Cable
Power
Cord
Monitor or
Projector
Power Outlet
DVD
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9 Connecting to Audio Input and Output
<Remark> Audio output is set according to VGA input; if VGA IN has
Audio in, preset the output of audio source of VGA IN(1).
Power
Adapter
Audio Cable
Power
Cord
Audio Cable
Audio Cable
TV or DVD
Power Outlet
Computer (2)
Computer (1)
Speaker
<Remark>: Or connect to an additional amplifier before connecting
to the speaker.
4.10 Installing application software
After installing the USB driver and application software, you can use the
following functions:
Control the DVP508.
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
<Note>: Please refer to Dukanes software user manual for installation
steps and software operation.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Start Using
<Note>: Please adjust it to be suitable for the local voltage frequency of
50/60Hz. For the frequency in actual use, please refer to the
manual. (Attachment 1)
1. Remove the lens cap.
2. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
3. Pull up the lamp arm to a proper position.
4. Place an object to be displayed under the camera.
5. Press [POWER]
on the remote control or control panel to power on.
on the control panel to optimize the image.
6. Press [AUTO TUNE]
You are ready to present.
7. Each time the camera head is moved, press [AF]
on the remote
control or control panel to refocus the lens.
<Note>: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor
of lens was reached.
When using the remote control, aim at the receptor on the DVP508, and
press the power button.
Once DVP508 is turned on, the LED on the control panel will flash a few
times and stay lit. Please contact your distributor if the LED is not on.
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 DIP Switch Settings
<Note>: You must re-start for DIP switching configuration to take
effective.
6.1Connecting to a projector or monitor
6.1.1 XGA 60Hz output( default values) XGA 50Hz output
6.1.2 SXGA 60Hz output
6.1.3 720P 60Hz output
SXGA 50Hz output
720P 50Hz output
6.1.4 Special Mode 60Hz output
Special Mode 50Hz output
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Connecting to a TV/DVD
6.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada,
Chile, Japan, Korea and Mexico
60Hz
50Hz
6.2.2 PAL: Countries or regions not listed above.
60Hz 50Hz
<Remark> It doesn’t support C-VIDEO and VGA simultaneously. Once
C-VIDEO is on, VGA is not supported.
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 Control Panel/Remote Control
and Setting Menu
7.1 Functions of control panel and remote control
<Note>: OSD is not available at C-VIDEO mode. [MENU] / [ENTER] /
[PLAYBACK] / [ROTATE] / [PAN] / [RECORD] / [CAPTURE] / [DELETE] / [VGA]
/ [SLIDE SHOW] / [PBP] functions are not available on the machine panel
and the remote control.
<Remark> The below functions are listed alphabetically.
Name
Function Descriptions
Operation
Remote
Turn on and off the Document Camera.
control /
Control panel
,,,
AF
Remote
control /
Control panel
Move up, down, left or right to select the needed
function.
Control panel
Auto Focus
AUTO TUNE
BRT+/-
Remote
control /
Control panel
Automatically adjust the image to have the best
brightness and focusing performance.
Remote
control /
Manually adjust the brightness of the image.
Control panel
CAPTURE
Remote
control /
Control panel
Capture the image to the SD card (priority) or internal
memory.
DELETE
ENTER
Remote
control
Delete the image stored in the SD card (priority) or
internal memory.
Remote
control /
Enter/Activate functions.
Control panel
FREEZE
LAMP
Remote
control /
Control panel
Freeze the current image to temporarily stay on the
screen. Press again to defreeze.
Control panel
Turn on / off the lamp.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU
Remote
control /
Activate the setting menu function/exit menu.
Control panel
PAN
Remote
control
Switch a part of the live image.
PBP
Remote
control
Display live images together with captured images.
Display the list of captured images.
PLAYBACK
Remote
control /
Control panel
Turn on the projector.
Turn off the projector.
Projector
ON
Control panel
Projector
OFF
Control panel
RECORD
Remote
control /
Control panel
Press [Record] to record images to SD card (priority),
press [Record] again to stop recording.
ROTATE
Control panel
Rotate the image by 0°/90°/180°/270°
SLIDE
SHOW
Remote
control /
Control panel
Show the photos or videos stored in the SD card
(priority) or internal memory in slide mode.
VGA 1
VGA 2
Switch between different image sources of VGA 1
Remote
control /
Control panel
Document Camera/VGA IN(1)/VGA IN(2)/DVD
Switch between different image sources of VGA 2
Control panel
VGA Out (VGA OUT(1)) / VGA IN(1) / VGA IN(2)
<Note> VGA 2 button functions only when VGA
OUT2 is set to (VGA IN), and for the related
setting, refer to 8.2 I would like to set the image
source of VGA OUT2.
ZOOM +/-
Remote
Increase or decrease the image size.
control /
Control panel
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Setting Menu
<Remark> Press [MENU] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are the
defaults.
1st Level
Major
Items
3rd Level
Adjustment
values
2nd Level
Minor Items
Function Descriptions
Adjust the image to the optimal
condition.
Use the left and right arrow keys
to adjust focal length on an
object.
Auto Tune
Focus
Enter
0~A~Max
Use the left and right arrow keys
to adjust brightness.
Use the left and right arrow keys
to select the image mode.
Use the left and right arrow keys
to select the image mode.
Brightness
Mode
0~A~Max
Normal/Slide/Film
/Microscope
Display
Photo/Text
Photo/Text/Gray
Use the left and right arrow keys
to select. The night vision mode
suits with darker environment.
Use the left and right arrow keys
to turn digital zoom on/off.
Press [ENTER] to play the
photos or videos stored in the
SD card (priority) or internal
memory.
Night Vision
Digital Zoom
On/Off
On/Off
Slide Show
Enter
1.
2.
3.
4.
5.
6.
Off
Shutter
Right
Down
Side
Use the left and right arrow keys
to select the image switch
mode.
Slide Show
Effect
Open
1. 0.5 Sec
2. 1 Sec
3. 3 Sec
4. 5 Sec
5. 10 Sec
6. Manual
1. High
Storage
Use the left and right arrow keys
to select the delay time.
Select manual mode to switch
images manually.
Delay
Use the left and right arrow keys
to select the image quality for
the captured images and
recorded videos.
2. Medium
3. Low
Image Quality
Press [ENTER] to immediately
copy the data in Document
Camera to the SD card.
Copy To SD
Card
Enter
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the left and right arrow keys
to select, and then press
[ENTER] to confirm the deletion
of photos. Delete the image
stored in the SD card (priority)
or internal memory.
Use the left and right arrow keys
to select, and then press [Enter]
to format the data stored in the
SD card (priority) or internal
memory.
Delete All
Format
Yes/No
Yes/No
Use the left and right arrow keys
to select the USB transfer
mode.
Camera/Storage
device
1.Camera: Connecting the
DVP508 to view live image.
2.Storage device: connecting to
the SD card (priority) or
internal memory.
USB Transfer
1. Single
2. Continuous
3. Disable
Use the left and right arrow keys
to select the video capture
mode. (Single/Continuous/
Disable)
Capture
1. 1 hr
2. 2 hr
3. 4 hr
4. 8 hr
Use the left and right arrow keys
to set the capture time.
<Note> It only works when the
capture mode is set to
Capture Time
5. 24 hr
1. 5 Sec
2. 10 Sec
3. 30 Sec
4. 1 Min.
5. 2 Min.
6. 5 Min.
[continuous].
Use the left and right arrow keys
to set the capture interval.
<Note> It only works when the
capture mode is set to
Capture
Interval
[continuous].
Setting
Regardless of outside
environment, the machine will
adjust the brightness to the
optimal condition. Use the left
and right arrow keys to select.
Regardless of outside light or
color, the machine will adjust
the color to the optimal
Auto Exposure
White Balance
On/Off
Enter
condition; Press [Enter] to
activate.
Use the left and right arrow keys
to select the projector type and
reduce image noise.
Use the left and right arrow keys
to adjust the volume.
Projector Type
Volume
DLP/LCD
0~A~Max
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Use the left and right arrow
keys to select the images
displayed by VGA OUT(2).
2.VGA IN: Use the [VGA 2] key
on the control panel to select
whether the screen images
are output from VGA IN(1) or
VGA IN(2).
VGA IN / VGA
Out(1)
VGA OUT(2)
VGA Out(1): The image
output is the same as the
setting of VGA Out(1)
English
Traditional Chinese
German
French
Spanish
Russian
Dutch
Finnish
Polish
Italian
Portuguese
Swedish
Czech
Simplified Chinese
1. English
2. 繁體中文
3. Deutsch
4. Français
5. Español
6. Русский
7. Nederlands
8. Suomi
Language
9. Polski
10. Italiano
11. Português
12. Svenska
13. ČESKY
14. 简体中文
Use the left and right arrow keys
in the Language option to select
the preferred language.
Use the left and right arrow keys
to turn the lock down function on
and off.
Lock Down
Auto Erase
On/Off
On/Off
Advanced
You can set the password when
[On] is selected.
Use the left and right arrow keys
to turn the auto erase function
on and off. When [On] is
selected, the saved images will
automatically be deleted when
the system is turned off.
Read the value of the current
image mode. Use the left and
right arrow keys to select, and
then press [ENTER] to confirm.
Save the value of the current
image mode. Use the left and
right arrow keys to select, and
then press [ENTER] to confirm.
Use the left and right arrow keys
to select, and then immediately
press [ENTER]to activate the
factory reset.
Preset Load
Preset Save
Factory Reset
Yes/No
Yes/No
Yes/No
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Descriptions of major
functions
8.1 I would like to automatically adjust the image to have best
brightness and focusing performance (Auto tune)
1. Press [AUTO TUNE] on the remote control or control panel to adjust
automatically.
8.2 I would like to set the image source of VGA OUT2
Press [MENU] on the remote control or control panel to enter the setting
menu
1. Press [] or [] to the [Setting] menu.
2. Press [] to enter [VGA OUT2].
3. Press [] or [] to select [VGA OUT 1/VGA IN].
4. Press [MENU] to exit.
When VGA OUT2 is set to VGA IN,
1. Press [VGA 2] on the control panel to switch between the image
sources of VGA IN(1) and VGA IN(2).
8.3 I would like to switch image sources
The default of image source is Live Image. Press [VGA 1] on the remote
control or control panel to switch setting and DVP508 will switch among the
following five modes in turn:
1. Live images (default)
2. VGA IN(1)
3. VGA IN(2)
4. DVD C-Video
5. DVD S-Video
<Note> VGA IN mode will start only when it is connected to input
equipment.
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4 I would like to make text clearer and photos more
colorful
The default of [PHOTO/TEXT] is PHOTO. Use the remote control or the
control panel to change settings.
[Photo] (default): for viewing photos or text with photos and will make the
photos more colorful.
[Text]: for viewing text files and will make the text clearer.
[Gray]: for viewing black and white photos and will make the grayscale
differentiation more distinct.
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Photo/Text].
4. Press [] or [] to select [Photo/Text/Grey] (Refer to the previous
section to make the most appropriate selection).
5. Press [MENU] to exit.
8.5 I would like to zoom in /out of images
1. Press [ZOOM +] on the remote control or control panel to zoom in.
2. Press [ZOOM -] on the remote control or control panel to zoom out.
8.6 I would like to use the auto focus
1. Press [AF] on the remote control or control panel.
8.7 I would like to adjust the brightness
1. Use the remote control or the control panel and press [BRT +] to
increase the brightness.
2. Use the remote control or the control panel and press [BRT -] to
decrease the brightness.
8.8 I would like to turn on / off the lamp
The default of the lamp is ON. When using the control panel:
1. Press [Lamp] to switch ON/OFF. (in the sequence of arm
lamp/backlight/OFF)
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
8.9 I would like to capture images
8.9.1 Setting the quality of captured images
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
8.9.2 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture].
4. Press [] or [] to select [continuous].
5. Press [] to find [Capture Time]; Press [] or [] to select time
settings.
6. Press [] to find [Capture Interval]; Press [] or [] to select time
settings.
7. Press [MENU] to exit.
8.9.3 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel.
<Remark> If the capture mode is set to [continuous], press
[CAPTURE] to capture images continuously, press [CAPTURE]
again to exit.
8.10 I would like to view captured images
<Note> Images over 8 MB, cannot be played. Whilst playing, the
[Rotate] function can be activated to rotate the images.
1. Press [PLAYBACK] on the remote control or control panel to
display thumbnails of all captured images.
2. Press [] or [] or [] or [] to select the thumbnail you want you
view.
3. Press [ENTER] for the full-screen display of the image.
4. Press [] or [] to turn to the previous/next image.
5. Press [MENU] to exit.
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
8.11 I would like to delete captured images
1. Use the remote control and press [PLAYBACK]
2. Press [] or [] or [] or [] to select the thumbnail you want you
delete.
3. Pressing [DELETE] will open a [Delete File] window.
4. Press [] or [] to select [Yes] (The default value is No).
5. Press [ENTER] to delete the selected photo.
6. Press [MENU] to exit.
8.12 I would like to automatically delete the captured
images whenever it is turned off (Auto Erase)
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] or [] to [Auto Erase].
4. Press [] or [] to select [ON].
5. Press [MENU] to exit.
6. It will automatically delete all captured photos when it is turned off.
8.13 I would like to record motion images (Record).
8.13.1. Setting the image quality
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
8.13.2. Recording motion images
1. Press [RECORD] on the remote control or control panel to start
recording videos.
2. Press [RECORD] again to stop recording.
<Remark> Record sounds with the built-in microphone of the
control panel.
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
8.13.3. Playing image
1. Press [PLAYBACK] on the remote control or control panel to
display thumbnails of all videos recorded.
2. Press [] or [] or [] or [] to select files to browse.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to adjust the volume of the video.
<Note> When motion images are played back, the volume of
Audio Out can be controlled by up/ low arrow keys. In any other
modes, you are not allowed to control volume using [] or []
key.
5. Press [] or [] to turn to the previous/next video.
6. Press [SOURCE] to exit.
<Note> Only the files recorded can be played, and when live
sound output is not available, additional amplifier can be
connected to AUDIO OUT.
8.14 I would like to switch a part of the live image
(PAN)
Use Remote control:
1. Press [PAN] to enter the image pan mode.
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
8.15 I would like to play the slides (Slide Show)
8.15.1 Setting the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off / Shutter /
Right / Down / Side / Open].
5. Press [MENU] to exit.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
8.15.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select image switch mode between [0.5 Sec / 1
Sec / 3 Sec / 5 Sec / 10 Sec / Manual].
5. Press [MENU] to exit.
8.15.3 Activating/Stopping the slide show
<Note> Images over 8 MB, cannot be played.
If you use the remote control or the control panel:
1. Press [SLIDE SHOW] to start playing.
2. Press [SLIDE SHOW] again to stop playing.
8.16 I would like to view the X-ray film
1. Place an X-ray film to be displayed under the camera.
2. Press [Lamp] button on the control panel to switch on the Backlight (in
the sequence of arm lamp/backlight/OFF)
3. Press [AUTO TUNE] button to optimize the image.
8.17 I would like to compare images (PBP)
This function will compare and contrast a live image with a captured image.
C1
C3
C2
C4
C5
C6
C7
Live Image
Captured Image
Use Remote control
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [] or [] to move the image left or right.
<Remark> Press [ENTER] to switch between the captured and
live images.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press [PLAYBACK] to return to image thumbnails.
6. Repeat Steps 2 ~ 4.
7. Press [MENU] to exit.
8.18 I would like to resume the factory default setting
(Factory Reset)
8.18.1 Use the OSD menu
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] to the [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
8.18.2 Use Compound Key
1. Use the remote control or control panel, and press [Enter + Auto
Tune] simultaneously to restore the initial value.
8.19 I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to
improve the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.
3. Press [MENU] on the remote control or control panel to enter the
setting menu.
4. Press [] or [] to the [Setting] menu.
5. Press [] to enter [Projector Type].
6. Press [] or [] to select [LCD/DLP].
7. Press [MENU] to exit.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
8.20 I would like to control projector.
8.20.1 Connecting to a computer
Connect DVP508 to a computer, and for connecting method, refer to User
Manual 4.8 Connecting to a Computer with RS232.
8.20.2 Installing application software
8.20.2.1 Go to Dukanes website:
download the software [Projector Control]
from the download page.
8.20.2.2 Extract the file and then click [Setup.exe] to install.
8.20.2.3 The installation wizard will guide you through the process.
Please follow the on-screen instructions and press [Next] for
the next step.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
8.20.2.4 When the installation is completed, press [Finish] to end the
installation procedure.
8.20.3 Setting procedure
8.20.3.1 Click[Start]/[Programs]/[Projector Setup]
8.20.3.2 When the procedure is started, a setting window will pop up.
8.20.3.3 Press [CONNECT] to set up the connection. [Com Port]
lamp flashing green indicates a successful connection.
DUKANE 7855N
8.20.3.4 Press [Select Projector] to select the projector type and
display information.
8.20.3.5 Press [Program] to switch DVP508 settings.
[Note] If any setting is modified, press [Save as] to set up a “*.txt” file
for setting storage.
8.20.3.6 When the setting is completed, press [Exit] to exit.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
8.20.4 Connecting to a projector
8.20.4.1 Remove the RS-232 cable from the computer.
8.20.4.2 Connect the RS-232 cable to the RS-232 port on the
projector.
DVP508
RS232 Adapter
8.20.5 Control of projector
8.20.5.1 Press [Projector ON] on the control panel to turn on the
projector.
8.20.5.2 Press [Projector OFF] on the control panel to turn off the
projector.
8.21 Using a SD card
8.21.1 Deactivate the write protect function (SD Lock)
If the write protect function of the SD card is activated, you will not be
able to use the Capture function, although you can still read the files in
it. Adjust the Lock of the SD card to deactivate the write protect
function.
8.21.2 Inserting a SD card
8.20.2.1 The screen will display [Copy to SD card] and ask if you
would like to copy the files saved in the DVP to a SD card.
Press [] or [] on the control panel to select.
Copy to SD Card
YES
NO
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
8.20.2.2 The screen will display as follow, once you insert an
unformatted SD card:
Format SD Card
YES
NO
Press [] or [] on the control panel to select.
<Note> The data previously saved on the SD card will be erased
when it is formatting.
8.21.3 Ejecting a SD card
<Note> Turn the power off before ejecting the SD card to avoid
damaging the SD card.
8.22 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to Chapter 4 Installation and
Connections in this user manual.
8.22.1 I would like to insert a photo in MS-Paint
1. Click [File/From Scanner or Camera] in MS-Paint shown as the
bottom left figure.
2. Click [Get Picture] will capture the photos of live images and insert the
files in use shown as top right figure.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
8.22.2 I would like to insert a photo in MS-Word
<Remark> For Windows Office 2003 or later versions, please use
the function with OneNote.
1. Click [Insert / Image / From Scanner or Camera] in MS-Word.
2. Select [Visual Presenter V2] and click [Custom Insert].
3. Click [Get Picture]. It will capture the photo of live image.
DVP508
8.22.3 I would like to change the setting of the
and then
capture a photo in MS-Word
1. Click [Insert / Image / From Scanner or Camera] in MS-Word.
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert].
3. A window showing a live image (see below) will be displayed:
4. Press [Setting]
To control the DVP508 via the Camera Settings interface. The
operating procedure is the same with the remote control and control
panel of the DVP508. Refer to User Manual Chapter 7
Control Panel / Remote Control and Setting Menu.
5. Press [Capture] to capture images in MS-Word.
6. Press [Cancel] to exit.
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVP508
8.22.4 I would like to set the
as a webcam for Skype
The DVP508 can be used as a webcam for teleconferencing software such
as Skype or MSN. With Skype as an example, operating instructions are
provided below:
1. Open Skype and enter [Tools] > [Options].
2. Select [Video Settings] > [webcam] > [Visual Presenter V2] and check
Start my video automatically when I am in a call, as shown below.
3. Start calling your contact. When both sides are connected, Skype will
display the video screen.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVP508
8.22.5 I would like to set the
as a PC Camera
1. Press [MENU] on the control panel or remote control to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [USB Transfer].
4. Press [] or [] to select [Camera].
5. A window will be displayed, showing the [Visual Presenter V2], as
shown below.
6. Click the [Visual Presenter V2].
8.22.6 I would like to set the
as a Removable Disc
DVP508
1. Press [MENU] on the control panel or remote control to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [USB Transfer].
4. Press [] or [] to select [Storage device].
5. Press [MENU] to exit.
6. A [Removable Disc] will be displayed.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
<Remark> The Removable Disc will select SD card if a SD card has
been inserted, but if a SD card has not been inserted, the Removable
Disc is internal memory
<Note> Doing this will disable the [Capture] function. Suggest you
return it to [Camera] mode after using this function. Please follow
the 8.21.5 Steps 1 ~ 5.
8.22.7 I would like to connect Interactive Whiteboard
To connect an Interactive Whiteboard, please go to the SD card or
user manual for a specific brand.
) to download
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 Connecting to Microscope
1 Mount the microscope adaptor (Optional accessory) onto the microscope.
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28mm, Ø 31mm,
Ø 33mm, and Ø 34mm.
2 The lens of DVP508 connects with the microscope adapter.
If the eyepiece is Ø 33mm or Ø 34mm, only one Dukane microscope
adapter is needed.
If the eyepiece is Ø 28mm or Ø 31mm, you need two microscope
adapters. (1. The Dukanes microscope adapter. 2. The microscope
adapter suitable for the eyepiece size Ø 28mm or Ø 31mm).
3 Select the [Microscope] Mode
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1. If you use the remote control or the control panel
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to the [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to the [Microscope].
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the control panel [AF] button to activate the auto focus.
5 Digital Zoom
5.1. If you use the remote control or the control panel
5.1.1. Press [MENU] to enter the setting menu.
5.1.2. Press [] or [] to the [Display].
5.1.3. Press [] to select [Digital Zoom].
5.1.4. Press [] or [] to select [On].
5.1.5. Press [Zoom +] / [Zoom - ]
<Note> Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display].
3. Press [] to select [Mode].
4. Press [] or [] to the [Normal].
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 Packing the Machine
1.
2.
3.
Put the remote control back to the holder.
Fold back the camera head to align with the arm.
Turn the two lamp arms and the arm of camera head down and adjust
them to be parallel with the platform.
4.
5.
Put the lens cap on the camera head.
Finally, fold the machine as in the following figure.
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 Troubleshooting
This chapter describes problems you may encounter while using DVP508. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
1
Issues
Solutions
Boot without power
Make sure you have plugged in the power cord.
2
No image output
1. Check the power.
from the
2. Check the connection, Refer to User Manual
Chapter 4 Installation and Connections
DVP508
3. Check the
, refer to User Manual Chapter 8
Descriptions of major functions 8.3 I would like to
switch image sources.
4. Check the settings for the source of the projector. For
the appropriate input selection of the projector, refer to
the projectors user manual.
5. Check if DIP Switch is properly set. Refer to User
Manual Chapter 6 DIP Switch Settings for related
settings.
Unable to focus
Probably the document is too close. Press [Zoom -] on the
remote control or control panel. Or pull away the
distance between document and lens, then press [AF].
Check the Auto Image setting of your projector. Please refer
to the user manual of the projector.
3
The image is
incomplete
Forget the
4
5
Please contact your distributor or the service center.
password for
turning on
6
Dukanes Document
Camera, Dukanes
and other
Dukane Document Camera, Dukanes and other
applications cannot be executed simultaneously. Please
close the currently running applications and then execute
the application to be used.
applications cannot
be used
simultaneously
When the unit is
turned on, the
auxiliary floodlight
7
Please make sure the arm lamp is set to [OFF]. For the
switch-on or -off of arm lamp, refer to User Manual
Chapter 8 Descriptions of major functions 8.8 I would
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
do not light.
like to turn on / off the lamp.
8
fails to store
1. Please make sure whether the stored data has
reached the maximum storage capacity of DVP508 unit
or SD card.
DVP508
images or react.
2. Please make sure if SD card is adjusted to the data
protection mode (Lock). Suggest you take out the SD
card from DVP508, and then adjust the SD card to the
mode of Unlock.
3. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to be
long. For the related setting, refer to User
Manual Chapter 8 Descriptions of major functions
8.9 I would like to capture images.
9
The images
Press [AUTO TUNE] to automatically adjust to the optimal
brightness and focal length.
outputted from
are too
DVP508
bright, dark or
vague.
10
The images
Please refer to the manual (Attachment 1), confirm the
voltage frequency and reset it according to Chapter 6 DIP
Switch Settings
outputted are not
clear, and the moire
appears.
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment 1
World voltage & frequency
Region/Country
Region/Country
Chinese English
Region/Country
Chinese English
Chinese
English
阿
富
汗
大
陸
關
石
島
島
Afghanistan 50
China
Colombia
Congo
Costa Rica 60
Cuba
50
60
50
Guam
Grenada
60
50
阿爾及利亞
哥 倫 比 亞
榴
Algeria
50
50
50
50
50
安
安
阿
澳
哥
地
根
拉
瓜
廷
洲
剛
果
瓜 地 馬 拉
Guatemala 60
Angola
哥斯大黎加
幾
蓋
海
內
亞
納
地
Antiqua
Argentina
Australia
Guinea
Gayana
Haiti
50
50
60
古
巴
亞
60
50
塞 普 路 斯
Cyprus
Czechoslov
akia
澳
地
利
捷
克
夏
威
夷
Austria
50
50
Hawaii
60
亞
巴
巴
孟
巴
比
百
述
哈
爾
馬
林
拉
多
時
達
達
丹
荷
美
麥
宏 都 拉 斯
Honduras
Azores
Bahamas
Bahrain
50
60
60
Dahomey
Den mark
Dominican 60
Dubai
Ecuador
Egypt
El Salvador
Equatorial
Guinea
Ethiopia
Faeroe
Island
Fiji
Finland
France
French
Guiana
50
50
60
香
匈
冰
印
印
伊
港
利
島
度
尼
朗
Hong Kong 50
多 明 尼 加
牙
Hungary
Ice land
India
Indonesin
Iran
50
50
50
50
50
加
貝
利
慕
杜
貝
Bangladesh 50
50
60
50
60
厄 瓜 多 爾
Babados
Belgium
Bermuda
50
50
60
埃
及
薩 爾 瓦 多
赤道幾內亞
衣 索 匹 亞
法 羅 群 島
玻 利 維 亞
伊
愛
曼
拉
爾
克
蘭
島
Bolivia
50
50
50
50
Iraq
50
50
波
巴
札
那
西
Botswana
Brazil
50
50
60
50
50
50
Ireland
Isle of Man 50
保 加 利 亞
裴
芬
法
濟
蘭
國
以
義
色
大
列
利
Bulgaria
Burma
Burundi
50
50
50
Israel
Italy
50
50
緬
蒲
甸
地
隆
象 牙 海 岸
Ivory Coast 50
高
棉
蓋
亞
比
那
牙
買
加
Cambodia
50
50
Jamaica
50
50
60
50
喀
加
麥
拿
隆
大
加
甘
德
彭
亞
國
日
約
肯
本
旦
亞
Cameroon 50
Gabon
50
50
50
Japan
Jordan
Kenya
Canada
CanaryIslan
d
Central
Africa Rep.
Ceylon
60
50
Gambia
Germany
康那利群島
中非共和國
50
迦
納
韓
科
黎
國
特
嫩
50
50
50
Ghana
50
50
50
Korea
60
50
50
錫
查
蘭
德
直 布 羅 陀
大 不 列 顛
威
巴
Gibraltar
Great
Britain
Kuwait
Lebanon
Chad
Channel
Island
海 峽 群 島
希
臘
賴
索
托
50
Greece
50
Lesotho
50
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Region/Country
Chinese English
Region/Country
Region/Country
Chinese English
賴 比 瑞 亞
Chinese
English
智
利
盧
利
亞
堡
格
陸
蘭
曼
Chile
Libya
50
50
Greenland 50
Oman
Liberia
60
50
60
比
森
阿
敘
大
利
溪
亞
地
50
50
Syria
Tahiti
巴 基 斯 坦
Luxembourg 50
Pakistan
R.O.C.
Taiwan
Tanzania
澳
門
巴
巴
秘
拿
拉
馬
奎
魯
中 華 民 國
坦 尚 尼 亞
Macao
50
50
50
Panama
Paraguay
Peru
60
50
60
60
50
50
馬得拉群島
馬 約 卡 島
Madeiral
Majokca
Island
泰
國
Thailand
Togo
Rep.of
Tonga
Trinidad
Tobago
Tunisia
Turkey
Uganda
USA.
馬 拉 加 西
菲
律
蔔
賓
多哥共和國
60
Malagasy
50
Philippines
50
馬
拉
威
波
葡
蘭
牙
東
千
他
加
達
哥
Malawi
50
50
50
50
Poland
50
〞
60
50
50
50
50
50
60
60
50
50
50
60
馬 來 西 亞
里
巴
Malaysia
Mali Rep.
Malta
Martinique 50
Mauritania 50
Portugal
Puerto Rico
Qatar
Rhodesia
Romania
Rwanda
Saudi
馬
馬
利
他
波 多 黎 各
爾
科
托
突 尼 西 亞
馬丁尼克島
茅里塔尼亞
模 里 西 斯
羅 德 西 亞
羅 馬 尼 亞
土
烏
美
耳
干
其
達
國
盧
沙
阿
安
烏
拉
達
地
Mauritius
50
50
60
墨
摩
西
那
哥
哥
蘇
聯
Mexico
60
USSR
50
50
50
50
伯 Arabia
United
Kingdom
Upper
Volta
蘇
格
蘭
英
上
烏
國
塔
奎
Monaco
50
Scotland
Senegal
50
50
50
蒙特色納島
塞 內 加 爾
伏
拉
Montserrat 60
Sierra
Leone
Singapore
Somalia
South
摩
洛
哥
獅
新
子
加
山
坡
Morocco
50
Uruguay
莫 桑 鼻 克
委 內 瑞 拉
Venezuela 60
Mozambique 50
50
50
尼
泊
爾
索 馬 利 亞
越
南
Nepal
50
Viet-Nam
Virgin
Island
Western
Samoa
50
荷
爾
南非共和國
維爾京群島
西 薩 摩 亞
葉 門 亞 丁
Netherlands 50
50
50
50
60
Africa Rep.
New
Caledonia
New
Zealand
新 蘇 格 蘭
西
班
牙
50
Spain
50
紐
西
蘭
斯 里 蘭 卡
50 Sri Lanka
Yeman(Aden) 50
尼 加 拉 瓜
蘇
蘇
丹
南
葉門阿拉伯
南 斯 拉 夫
Nicaragua
Niger
60
50
Sudan
Surinam
50
60
Yemen(Arab) 50
Yugoslavia 50
尼
日
利
Zaire Rep.
of
Zambia
奈 及 利 亞
史 瓦 濟 蘭
薩伊共和國
Nigeria
50
Swaziland
50
50
50
挪
琉
威
球
瑞
瑞
典
士
尚
比
亞
Norway
Okinawa
50
60
Sweden
50
50
Switzerland
430-DVP508-User manual-00
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
|