Craftsman Lawn Mower 48624539 User Manual

Owner's Manual  
®
48" TOW LAWN FINISHER  
Model No. 486.24539  
CAUTION:  
• Safety  
Before using this product,  
read this manual and follow  
all Safety Rules and  
Operating Instructions.  
• Assembly  
• Operation  
• Maintenance  
• Parts  
IMPORTANT - READ THIS FIRST!!!  
For Missing Parts or Assembly Questions  
Please Call 1-866-576-8388  
Mon.-Fri. 7am - 5pm CST.  
FAX 217-728-2032 or email [email protected]  
Missing parts will be sent UPS in 24 hours directly to your home.  
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.  
FORM NO. 49577 (Rev. 3/05)  
PRINTED IN U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAND FILL  
1
3
5
16  
12  
6
11  
13  
FIGURE 1  
FIGURE 2  
13  
11  
12  
16  
8
7
5
6
4
15  
2
15  
FIGURE 4  
9
FIGURE 3  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Tools Needed:  
(2) 1/2" Open End Wrench  
(1) Hammer  
(See Figure 4)  
11. Place two 5/16" x 2-1/2" Hex Bolts(7) through the Hitch Tubes,  
and secure with two 5/16" Nylock Nuts(15).  
DO NOT FULLY TIGHTEN THE NUTS AT THIS TIME.  
*Refer to Illustrations on page 3.  
12. Place two 5/16" x 2-1/4" Hex Bolts(8) through one of the  
Hitch Brackets(4). From the top, slide the bolts between the  
two Hitch Tubes, making sure the Bracket Bolts(8) are in  
between the Tube Bolts(7).  
(See Figure 1)  
1. Insert one Round Flange Bearing(16) into the hole  
in the End Cap(5), and insert End Cap(5) into one  
end of the Striper Tube(1).  
13. Place the other Hitch Bracket(4) on the bottom of the Hitch  
Tubes and secure with two 5/16" Nylock Nuts.  
TIGHTEN ALL BOLTS.  
2. Slide the Axle(3) through the Round Flange  
Bearing(16) leaving roughly 3" of axle outside the  
End Cap. Place one Washer(12) over the end of  
the axle.  
OPERATION  
3. Insert one Hex Flange Bearing(11) into the hole in  
the Hitch Tube(6), and slide the Hitch Tube over  
the axle. The bearing flange must face against the  
washer.  
1. Attach the Lawn Finisher behind any Lawn and Garden  
tractor, with one Hitch Pin(10) and one Hairpin Cotter(14).  
2. Tow in a "back and forth" manner across your yard, to  
create the desired look. This unit can be towed while  
mowing.  
4. Using a Hammer, tap one 1/2" Palnut(13) over the  
end of the Axle(3), until it is fully seated.  
(See Figure 2)  
SPECIFICATIONS  
5. Place the unit in an upright position and fill the  
Striper Tube(1) with sand. Leave about 1" of  
the tube un-filled.  
Roller Length  
Roller Dia.  
48"  
4"  
(See Figure 3)  
6. With the unit still standing on end, insert one  
Round Flange Bearing(16) into the hole in the  
End Cap(5), and insert End Cap(5) over the axle,  
until it is fully seated in the Striper Tube(1).  
7. Place a Washer(12) over the end of the axle.  
8. Insert one Hex Flange Bearing(11) into the hole in  
the Hitch Tube(6) and slide the Hitch Tube over  
the axle. The bearing flange must face against the  
washer.  
9. Using a Hammer, tap one 1/2" Palnut(13) over the  
end of the Axle(3), until it is fully seated.  
10.Carefully lay the unit down and place the Scraper  
Bar (2) on top of the Hitch Tubes(6) and secure to  
each end with one 5/16" x 1-3/4" Hex Bolt(9) and  
one 5/16" Nylock Nut(15). Make sure both bolts  
are tight.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS BREAKDOWN  
REPAIR PARTS FOR MODEL 486.24539  
5
13  
11  
12  
16  
3
a
15  
1
9
6
a
7
8
8
7
5
2
16  
b
12  
11  
10  
4
9
13  
b
4
6
15  
15  
14  
15  
15  
15  
# PART #  
DESCRIPTION  
QTY  
# PART #  
DESCRIPTION  
QTY  
1
49574  
25505  
25506  
24192  
49575  
49576  
44292  
43224  
Striper Tube  
Scraper Bar  
Axle  
Hitch Bracket  
End Cap  
Hitch Tube  
Bolt, Hex 5/16" x 2-1/2"  
Bolt, Hex 5/16" x 2-1/4"  
1
1
1
2
2
2
2
2
9
43084  
10 47623  
11 47963  
Bolt, Hex 5/16" x 1-3/4"  
Pin, Hitch  
Hex Flange Bearing  
Washer, 0.53 x 1.5"  
1/2" Palnut  
2
1
2
2
2
1
6
2
2
3
4
5
6
7
8
R19172410  
12  
13 44166  
14 43343  
15 47810  
Pin, Hairpin Cotter  
Nut, Hex 5/16" Nylock  
16 741-0248 Round Flange Bearing  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get it fixed, at your home or ours!  
For repair of major brand appliances in your own home…  
no matter who made it, no matter who sold it!  
1-800-4-MY-HOMESM Anytime, day or night  
(1-800-469-4663)  
To bring in products such as vacuums, lawn equipment and electronics  
Sears Parts & Repair Center.  
for repair, call for the location of your nearest  
1-800-488-1222 Anytime, day or night  
For the replacement parts, accessories and owner’s manuals  
that you need to do-it-yourself, call Sears PartsDirectSM  
!
1-800-366-PART 6 a.m. – 11 p.m. CST,  
(1-800-366-7278)  
7 days a week  
To purchase or inquire about a Sears Service Agreement:  
1-800-827-6655  
7 a.m. – 5 p.m. CST, Mon. – Sat.  
Para pedir servicio de reparación a domicilio,  
y para ordenar piezas con entrega a domicilio:  
1-888-SU-HOGAR SM  
Au Canada pour service en français:  
1-877-LE-FOYERSM  
(1-877-533-6937)  
(1-888-784-6427)  
SM  
HomeCentral  
® Registered Trademark / ™ Trademark of Sears, Roebuck and Co.  
® Marca Registrada / ™ Marca de Fábrica de Sears, Roebuck and Co.  
© Sears, Roebuck and Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics GPS Receiver MC 600Ci User Manual
Craftsman Lawn Mower 917385192 User Manual
DigiTech Musical Toy Instrument Element User Manual
Dual GPS Receiver XNAV3500P User Manual
Electro Voice Portable Speaker B 1150M User Manual
Electro Voice Speaker System Fri+122 64 User Manual
EVGA Computer Hardware GTX 295 User Manual
Fellowes Paper Shredder DS 1200C User Manual
Fender Musical Instrument Amplifier FM 65 DSP User Manual
GE Monogram Refrigerator ZIR36NDGE User Manual