OWNER'S INSTRUCTION
MANUAL
DECT 6
CORDLESS TELEPHONE
MODEL 8015
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Telephone Repair
Limited Warranty
49
51
Advanced Functions
29
Menu Navigation
Menu Map
29
30
31
34
36
40
41
Phone Book
BS Settings
HS Settings
Registration
Calling with more than one
Handset
Caller ID on call waiting
43
44
Feature List
Troubleshooting
45
46
Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
THANK YOU
FOR PURCHASING THE
8015 DECT 6
CORDLESS TELEPHONE
We want you to know all about your new telephone, how to install it, the
features it provides, and the services you can expect from its use. We have
included this information in your Owner's Instruction Manual.
PLEASE READ BEFORE INSTALLING AND
USING YOUR NEW TELEPHONE
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Always follow basic safety precautions when using your telephone to reduce the risk of fire,
electical shock and injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
protect it from overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on the bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation unless proper ventilation is
provided.
7. This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Do not allow anything to rest on the power cord. Do not locate this product where the cord
will be damaged by persons walking on it.
9. Do not overload wall outlet extension cords, as this can result in the risk of fire or electric
shock.
10. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on this product.
11. To reduce the risk of electric shock, do not disassemble this product. Instead, when some
repair work is required, take the unit to a qualified technician. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a.
b.
c.
d.
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions,
adjust only those controls that are covered by the operating instructions because
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or cabinet has be damaged.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
f. If the product exhibits a distinct change in performance.
13. Avoid using a telephone during an electrical storm. There may be a risk of electrical shock
from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
15. Plug the power adaptor into an electrical outlet that is near the equipment and easily
accessible.
Safety Instructions for Handset Battery Pack
CAUTION:
There is a danger of explosion if the batteries are incorrectly replaced. Use only approved
batteries in the handset of your telephone. To reduce the risk of fire or injury, be careful not to
short the batteries with conducting materials such as rings, bracelets, and keys. The batteries
or conducting material may overheat and cause burns.
CONTAINS NICKEL-METAL HYDRIDE BATTERY. BATTERY MUST BE
RECYCLED OR DISPOSED OF PROPERLY
1. Do not dispose of the batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
3. Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may overheat and
cause burns.
4. Charge the batteries only in accordance with the instructions and limitations specified in
this manual.
5. Observe proper polarity orientation for the batteries as marked in the telephone.
6. Do not mix old and new batteries.
7. Do not mix batteries of different sizes or from different manufacturers.
8. Use only the power supply which came with the phone.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Prior To Use
n Unpacking
Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
Base
Handset
User's manual
3 AAA Ni-MH
batteries
Adapter*
Line cord*
Carrying clip
6
Download from Www.Somanuals.com. All Manuals Search And Download.
n Phone Layout and Keys Function
Handset
Earpiece
Ear-microphone
jack
Display
Carrying clip
Up/CID key
Left/Int key
Right soft key
Left soft key
Right/Redial key
Battery
compartment
cover
Dial/Speaker key
End key
Down
Alphanumeric
keys
/Phonebook key
key
key
Microphone
Charging contacts
7
Download from Www.Somanuals.com. All Manuals Search And Download.
n Phone Layout and Keys Function (continued)
Base
Antenna
In use indicator
flashes when you
press the
key.
It also flashes
when you page
the handset.
Charge indicator
lights steadily
while the handset
is charging.
Charge pins
Power Jack
Phone Line Jack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
n Keys Description
Dial/Speaker key
Make/Answer a call.
Activates the speakerphone if pressed during a call, as described in page 25.
End key
End a call.
Long press to activate power on/off, as described in page 12.
Navigation key:
Up/CID key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume during a call.
Enter the CID book, as described in page 19.
Down/Phonebook key
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume during a call.
Enter the Phonebook, as described in page 29.
Left/Int key
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line and an internal handset.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
n Keys Description (continued)
Right/Redial key
Enter the redial book, as described in page 17.
Insert a pause when pre-dialing a number.
Left/Right soft key
Perform the functions indicated by the text immediately over it (on the bottom
line of the display) which changes time by time.
key
Press and hold to turn on/off keypad lock function.
Set up a conference call, as described in page 39.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
n LCD Window Icons Description
New Call
Signal Icon
Indicates you have missed one
or more calls.
Indicates whether the current
signal exists or not. If the
handset is too far from the base,
this icon will blink on the LCD.
MSG Waiting
Indicates you have one or more
voice messages.
Alarm Icon
This icon appears when you set
an alarm to ring at
time.
a
specified
Off Hook
Indicates the line is engaged.
Hands-free
Keypad lock
Indicates the handsfree function
is enabled.
This icon appears when the
keypad is locked.
Battery Icon
Indicates battery charge level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
n Connecting Lines
1. Connect one end of the phone line cord to the phone
line jack of the base, and the other end to
standard phone wall outlet.
a
2. Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC
adapters into a standard AC wall outlet.
To AC wall outlet
To phone wall outlet
n Installing Batteries
The rechargeable Ni-MH batteries (AAA size, 1.2V,
600mAh) come with your phone. Install the batteries
before use.
1. Slide the battery cover in the direction of the
arrow and pull it out.
Note:
2. Insert new batteries as indicated, matching
correct polarity (+,-).
Reversing the orientation may damage
the handset.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
n Installing Batteries (continued)
Notes:
The batteries need to be replaced if
3. To replace the battery
cover, slide the cover up
until it snaps in place.
they do not recover their full storage
capacities after recharging.
When replacing the batteries, always
use good quality Ni-MH re-chargeable
batteries. Never use other batteries
or conventional alkaline batteries.
n Charging Handset
! Important Note: Before initial operation, YOU SHOULD FULLY
CHARGE THE HANDSET for about 15 hours.
To charge the handset, you should place it on the base.
Result: When you place the handset on the base, the handset
automatically turns on and the Charge indicator lights on
during the charge.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
n Using Handset Carrying Clip
The supplied handset carrying clip allows you to
conveniently carry the handset with you. It clips
easily to your belt, waist band, or shirt pocket.
If you want to remove the carrying clip:
Insert a screw driver along the edge of one of
its arms and release the clip. Then lift it off.
n Using Headset (optional)
The headset jack is located in the left side of the
handset and is 2.5mm standard plug. Simply plug
the headset into the jack and the headset will be
activated.
Earphone
Microphone
Clip
Headset jack
Note:
When the headset is plugged into the headset jack
the microphone on the handset will be deactivated.
Headset plug
14
Download from Www.Somanuals.com. All Manuals Search And Download.
n Turning Handset On/Off
When the handset is in power off mode and you
place it on the base, it automatically turns on. To
turn the handset on or off in standby mode,
follow these steps:
When the handset has found the base, it will
enter the standby mode, the display will show
handset number and the handset name (if you
have one saved as described on page 23), signal
icon, battery icon and current time. If the
handset is unsuccessful in finding a base, the
handset will behave according to the Out of
Range condition.
1. To turn the handset on, press and hold the
key until the display is switched on. While the
handset searches for
a
base, the signal icon
will flash and the following message will be
displayed.
Note:
If the battery power is very low when you
place the handset on the base, the following
message will be displayed. YOU SHOULD
FULLY CHARGE THE HANDSET BEFORE
USING.
Searching...
2. To turn off the handset, keep the
pressed until the display is switched off.
key
Charging...
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the
key.
n Making a Call
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Pick up the handset and press the
key.
Result: The In use indicator flashes and the
icon appears on the LCD.
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the
insert a pause.
key to
2. Dial a telephone number.
3. To end the call, either press the
or replace the handset on the base.
key
Note:
If you make
a
mistake while entering
a
number, press the Erase soft key to clear
the last digit.
Note:
To make a call to the last number you dialed,
use the Redial feature. For details, see page
17.
2. When the number appears correctly, press
the
key.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
n Receiving a Call
When a call is received, the In use indicator
on the base will blink. The New Call
Result: After you hang up, the LCD displays the
call duration.
information will appear, too.
If the caller can be identified, the caller's
Notes:
phone number is displayed. If the caller
You can select the ringer volume by using
cannot be identified, only the New Call
the
or
key when the phone rings with
information displays. If you have
a
voice
an incoming call.
message, the icon and "MSG WTG ON"
If you want to deactivate the
icon, press
will be shown on the LCD.
the
key in standby mode, then press and
4ghi
hold the
key. After that, press the
key
1. To answer the call, press the
key. If
to return to standby mode. (The handset
must be registered to the base.)
you have activated the Auto Answer
function, when the handset is on the
base, simply lift it up to answer.
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the call.
2. To end the call, either press the
or replace the handset on the base.
key
17
Download from Www.Somanuals.com. All Manuals Search And Download.
n Muting the Microphone
During
a
conversation, you can temporarily
To mute your microphone, press the Mute soft
key during the conversation. The "Call Muted"
appears on the LCD.
switch your phone's microphone off, so that the
other party cannot hear you.
To unmute the microphone, press the Mute soft
Example: You want to say something to another
person in the room but do not want
the other party to hear you.
key again. You will restore the normal condition.
n Adjusting Voice Volume
During a conversation, you can use the
or
You can also select the earpiece volume or the
speaker volume by the Audio Setup in Menu
under HS Settings, as described in page 34.
key to adjust the level of the earpiece (or
the handsfree speakerphone one, if activated)
volume from V.1 to V.5. The selected volume
will be displayed on the LCD.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
n Ringer Setting
You can select your own external (from the
telephone Network) or internal (from other
handsets registered to the same base) ring tone
and adjust the volume.
Result: You can select the ring tone from
Melody 1 to 10 or adjust the volume
from Volume 1 to 5, or off. When you
adjust the ring tone or volume, the
phone plays the selected melody or
sounds the selected loudness.
1.Press the Menu soft key.
2.Press
or
key to choose HS Settings
6.Press the Save soft key to confirm.
menu, then press the Select soft key.
Note:
3.Press
or
key to choose Ring Setup,
If you set the volume to "Off", when a
press the Select soft key.
call comes in, only the New Call
information appears on the LCD.
4.Press the Select soft key to choose INT
Ring or press the
key to choose EXT
Ring, press the Select soft key.
5.Press
or
key to choose Melody or
Volume, press the Select soft key.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
n Last Number Redial
1. Press the
key or the Redial soft key in
Notes:
If no numbers are found, "Empty" is
displayed.
standby mode.
Result: The LCD displays the last number you
When the redial book is full, each time you
dial
dialed.
a
new number, the oldest number
stored in the redial book is automatically
erased.
2. Press the
key to dial out the number.
Your phone allows you to retrieve the last 10
numbers you have dialed and recall them
quickly.
Use Redial Book options
Using the redial book options, you can add a
number to phone book or delete a number in
the redial book.
Search for and dial
Redial Book
a
number in
1. Press the Redial soft key.
1. Press the Redial soft key in standby mode.
2. Scroll to the desired number by using the
2. If you want to scroll through the memory,
or
key.
press
or
key repeatedly until you
find out the number you want to dial.
3. When the number appears on the display,
press the More soft key to choose the
desired option:
3. Press the
key to dial out the number.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Add to PB: allows you to add the number to the
phone book. Complete storing the entry by
starting from step 4 described in par."Adding the
Phone Book Entries" (obviously, you will find the
number already entered in the appropriate field).
Delete: allows you to delete the selected number.
Delete All: allows you to delete the whole redial
book.
4. To return to standby mode, press the
key.
Note:
At step 3, when you select Delete or
Delete All options, a message "Confirm ?"
will further ask you to confirm the deletion.
To confirm press the Del or Del All soft key,
to escape press the Cancel soft key.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
n CID Book
When you receive
a
call, if the caller's
2. Use the Select soft key to choose the CID Book,
and if available, the numbers are displayed. (You
can also access the CID book directly by pressing
information is transmitted from the network
on which the call was made (and the caller
doesn't hide it), the caller's phone number is
displayed. Moreover, if you missed one or
the
key in standby mode.)
3. Use
or key to view the numbers, you can
more calls, the
icon will appear on the LCD.
make a call by a press of the key. You can
also add the entry to the phonebook.
If the CID memory is full, the
flash on the LCD.
icon will
Note:
At step 3, each item of the incoming list is
Out Of Area - This message will display when
someone calls from an area where the
telephone company is not offering the caller
identification services or is not yet providing
number delivery to your area.
marked with the
reviewed or with the
been reviewed yet.
icon if the call has been
icon if the call hasn't
Add CID Number to Phone Book
Private - If the caller has exercised the option
to prevent his name and number from being
sent, the message will show on the LCD.
1. Press the Menu soft key.
2. Use the Select soft key to choose the CID Book.
View and dial any of the CID
numbers
3. Use
or
key to view the numbers, when the
desired number displays on the LCD, press the
1. Press the Menu soft key.
More soft key to enter Add to PB menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the Select soft key, you are prompted to
5. Use
or
key to choose Delete, press
the Select soft key. The display will show
"Confirm ?". Press the Del soft key to
confirm, you will hear a beep and the LCD
shows the next number.
enter the name.
5. Enter the name and press the Next soft key,
then you can modify the number you want to
store.
Delete all numbers in the CID Book
6. Press the Next soft key, you are able to select
the ring tone from Melody
1
to Melody 10,
1. Press the Menu soft key.
press the Save soft key to confirm and exit,
you will hear a confirm beep.
2. Use the Select soft key to choose the CID
Book.
Delete a number in the CID Book
3. Press the More soft key and use the
or
key to choose Delete All menu, then
press the Select soft key.
1. Press the Menu soft key.
2. Use the Select soft key to choose the CID
Book.
4. The display shows "Confirm ?", press the
Del All soft key to confirm.
3. Scroll to the number you want to delete by
using
or
key.
Result: You hear
a
beep and the phone
returns to the standby mode after
clearing all the CID numbers.
4. When the desired number appears on the
display, press the More soft key.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
n Key Lock
If you turn on this feature, all keys will be locked.
You can answer calls by using the
key. But
when you hang up, the phone returns to the
locked mode. This feature is useful to avoid
pressing keys by mistake.
To lock the keys, in the standby mode just keep
the
key pressed till the display shows "HS
icon appears.
Locked", then the
To unlock the keys, keep the
again till the key lock icon
the display.
key pressed
disappears from
Note:
In locked mode, if you press any key, the
phone will generate a warning tone, and the
"HS Locked" message will be redisplayed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
n Auto Answer
With this feature, you can answer a call by
just picking up the handset from the base
without pressing any key.
3. Use
or
key to choose Auto Answer,
then press the Select soft key.
4. Use the
or
key to choose On/Off to
1. Press the Menu soft key.
enable/ disable the function, then press the
Save soft key, you will hear a confirm beep.
2. Press
or
key repeatedly to choose
HS Settings, press the Select key.
n Selecting a Language
The handset supports 9 predefined languages,
English, French, Spanish, German, Polish,
Slovak, Czech, Turkish and Greek. You can
change the language used to display the
menu messages.
3. Use
or
key to choose Language, then
press the Select soft key.
4. The languages will be displayed. Use the
or
key to scroll through the options. Each
language will be displayed in its own native
translation.
1. Press the Menu soft key.
2. Press
or
key repeatedly to choose
5. Press Save soft key to select the required
HS Settings, press the Select soft key.
language and you will hear a confirm beep.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
n HS Name
Using this feature, you can define a name of the
handset in order to easily recognize your handset
if you have more than one registered on the
same base. To set the handset name:
3. Use
or
key to choose HS Name, then
press the Select soft key.
4. You can enter the handset name (up to 12
characters) by using the alphanumeric keys
(use the Erase soft key to delete the incorrect
characters), then press the Save soft key to
confirm and exit. The handset name will be
displayed above your handset number in
standby mode.
1. Press the Menu soft key.
2. Press
or
key repeatedly to choose HS
Settings, press the Select soft key.
3. Use
or
key to choose Tone Setup,
n Range Alarm
then press the Select soft key.
A beep will sound when the handset is out of
range of the Base. You are able to select to
enable/disable this audible warning.
4. Press the key to choose Range Alarm,
then press the Select soft key.
5. Use
or
key to choose On/Off to
1. Press the Menu soft key.
enable/disable this audible warning, then
press the Save soft key, you will hear a
confirm beep.
2. Press
or
key repeatedly to choose
HS Settings, press the Select soft key.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
n Paging
To stop paging, press the
or any key on the handset.
key on the base again
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Note:
Press the
key on the base unit (less than 5
On a long
seconds, the base will enter subscription
mode. For details, see page 37.
key press, more than or equal to
seconds), all the handsets registered to the
base will ring for about 60 seconds.
5
n Dial Mode
You can select to change the dial mode by the
following steps:
4. You can press
or
key to select the required
dial mode options (Tone/Pulse) and press the
Save soft key. A confirm beep will be heard.
1. Press the Menu soft key.
Note:
2. Press
or
key repeatedly to choose BS
If you are not sure which dialing mode should
Settings, and press the Select soft key.
be selected, please contact your local service
provider.
3. Press the
key to choose Dial Mode, then
press the Select soft key.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
n Handsfree
During
a
call, you may turn on the
To turn the feature off, and keep on talking in
speakerphone built in the handset. In this
mode you can simply put your handset on a
surface (e.g. a desk) and enjoy the comfort
of the handsfree conversation.
normal mode, press the
icon will disappear.
key again. The
Notes:
Before putting the handset near your ears,
be sure you have turned the speakerphone
To turn the feature on, press the
during call (line engaged). The
key
a
icon
off.
To adjust the speakerphone volume, see
appears on the LCD.
page 15 or page 34.
n Flash Signal
When the line is engaged, pressing the Flash soft
key sends the Flash signal. This key is used in
conjunction with special services (e.g. call waiting)
which can be available in your phone network.
For further details please contact your network
telephone company.
To use the said special services, just press the
Flash soft key while the line is engaged: the
display will show R.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Functions
n Menu Navigation
To access a menu option:
To return to standby mode:
1. To display menu items, press the Menu
If you press the Back soft key from any menu,
soft key.
the phone returns to the previous screen.
2. To scroll through menu options, press the
To return to standby mode, press the
key.
or
key repeatedly.
Also, the phone will automatically return to
standby mode from any menu if no key is
pressed in the next 40 seconds.
3. To select a menu, press the Select soft key
when the desired menu appears on the LCD.
4. Repeat if necessary.
Note:
In standby mode, you can press
switch the backlight on/off.
key to
29
Download from Www.Somanuals.com. All Manuals Search And Download.
n Menu Map
4. HS Settings
Alarm (see page 36)
1. CID Book (see page 22)
Audio Setup (see page 37)
Ring Setup (see page 19)
Tone Setup (see page 26, 37)
Language (see page 25)
HS Name (see page 26)
Auto Answer (see page 25)
LCD Contrast (see page 38)
Date & Time (see page 38)
Select Base (see page 39)
HS Reset (see page 39)
2. Phonebook
New (see page 32)
Edit (see page 33)
Delete (see page 33)
Delete All (see page 33)
PB Status (see page 33)
3. BS Settings
Terminate HS (see page 34)
Dial Mode (see page 27)
Flash Time (see page 34)
Modify PIN (see page 35)
BS Reset (see page 35)
5. Registration (see page 40)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
n Phone Book
The phonebook built in your cordless phone allows you to store frequently used numbers so that you can
easily make a call without having to remember or enter the phone number.
Character Map
To enter a specific alphanumeric character, press one or more times the relevant key for the required
character according to the following table: once for the first character, twice for the second and so on.
Key
Characters in the displayed order
0
/
,
(spc)
?
_
C
F
&
+
a
!
0
@
B
.
"
c
f
(
)
%
1
2
1
A
D
G
J
-
b
e
2
3
3
4
5
6
E
H
K
N
d
4
5
6
g
j
i
l
I
h
k
n
p
L
M
m
S
o
q
O
R
V
Y
7
8
9
P
T
Q
U
X
s
z
7
9
r
u
v
x
8
y
t
W
w
Z
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding the Phone book Entries
Note:
If you make
a
mistake while entering
a
1. Press the Menu soft key.
number, use the Erase soft key to correct it.
Each time you press the key, the last digit is
deleted.
2. Press the
key to choose Phonebook, press
the Select soft key.
3. Press the Select soft key to choose New.
Using a Pause
4. The display shows "Name ?". Enter the name
you want to use, then press the Next soft key
to confirm. The display shows "Number ?".
Enter the desired number (up to 20 digits),
press the Next soft key.
A pause is useful when you access an interactive
voice response system, such as an automated
banking system.
A
pause provides
a
delay of
3
seconds. If you want to insert a pause when you
dial a number in standby mode or store a number
5.*Use
or
key to select the ring you like to
associate with the number, press the Save
in memory, press the
key. The letter P will
soft key to confirm.
appear at the pause entry.
6. Repeat if necessary.
Viewing the Phone book Entries
* If you want to set a VIP number, you should
select a special ring tone for it. The ring tone
should be different from the external ring you
have set. You can set up to 9 VIP ring tones
associate with 9 VIP numbers/groups.
1. In the standby mode, press the
key.
2. Press
or
key repeatedly until the desired
entry is displayed.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing a Number from Phone book
Deleting the Phone book Entries
1. Press the Menu soft key.
Find out the number you want to dial. Refer to
"Viewing the Phone book Entries". Then press the
key or Dial soft key.
2. Press the
key to choose the Phonebook,
press the Select soft key.
3. Press
or
key to choose Delete. Press the
Editing the Phone book Entries
Select soft key.
1. Press the Menu soft key.
4. Press
or
key repeatedly until the name
2. Press the
key to choose the Phonebook,
you want to delete displays, then press the
Select soft key. The display shows "Confirm ?".
You can press the Del soft key to delete it or
press the Cancel key to exit.
press the Select soft key.
3. Press the
key to choose Edit menu. Press
the Select soft key.
5. At step 3, if you choose Delete All menu and
press the Select soft key, the display will show
"Confirm ?". You can press the Del All soft
key to delete all the entries or press the
Cancel key to exit.
4. Press
or
key repeatedly until the entry
you want to edit displays, press the Select soft
key to confirm.
5. If necessary, press the Erase soft key to clear
the digit(s) then enter the desired name and
number, press the Next soft key to save.
PB Status
The PB Status shows the number of phone book
entries already stored. When the PB Status
shows on the LCD, press the Select soft key to
enter it.
6. Use
or
key to select the ring you like to
associate with the number, press the Save soft
key to confirm.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
n BS Settings
Terminate HS
Flash Time
This function allows you to delete
registration from the base.
a
handset
You can select to change the Flash time by the
following steps:
1. Press the Menu soft key.
1. Press the Menu soft key.
2. Press
or
key to choose BS Settings,
2. Press
or
key to choose BS Settings,
then press the Select soft key.
then press the Select soft key.
3. Press the Select soft key to choose the
Terminate HS menu. The display shows
"PIN?" to prompt you to enter the PIN Code
(The default PIN Code is "0000"). Then press
the OK soft key.
3. Use
or
key to choose Flash Time menu.
Press the Select soft key.
4. The display shows the current setting. Use the
or
key to select Flash-1 /Flash-2,
press the Save soft key.
4. Use
or
key to select a handset. If you
non-existent
select the current handset or
a
handset, a warning tone will be heard.
5. Press the Select soft key to confirm, and the
selected handset will behave according to
the unregistered condition.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Modify PIN
BS Reset
If you reset the base, all the features under BS
Settings menu will be restored to the factory
initial setting: Dial Mode and Flash Time.
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
1. Press the Menu soft key.
1. Press the Menu soft key.
2. Press
or
key to choose BS Settings,
2. Press
or
key to choose BS Settings,
then press the Select soft key.
then press the Select soft key.
3. Press
or
key to choose BS Reset menu,
3. Use
or
key to choose Modify PIN menu,
press the Select soft key. You will be
prompted to enter the PIN code.
press the Select soft key.
4. The display shows "PIN?". Enter the current
PIN, then press the Next key. If the old PIN
code is correct, you will be prompted to enter
a new PIN code, otherwise a warning beep will
sound and the handset will return to the
Modify PIN menu.
4. Enter the PIN code (the default PIN is 0000),
then press the Reset soft key. If the PIN
code is validated all Base settings will be
reset to the factory default, otherwise the
settings will remain.
Result: After resetting, the handset will return
5. Enter the new PIN, press the Next key. You
will be requested to confirm the PIN code.
Enter the new PIN again then press the Save
soft key to confirm and exit.
to standby mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
n HS Settings
6. Press the Next soft key, a beep sounds and
the display shows Snooze On/Off, you can
Setting Alarm
You are able to set the alarm on the handset
and adjust the alarm settings.
press
or
key to enable or disable the
snooze function on the alarm and press the
Save soft key.
1. Press the Menu soft key.
7. When the alarm sounds, press any key to
stop the ring.
2. Press
or
key to choose HS Settings,
then press the Select soft key.
Notes:
3. Press the Select soft key to choose Alarm
At step 5 you need to enter the time in 24-
Hour format.
menu.
If you press any key at the right time the
alarm to ring, the alarm will be silent.
If you choose Snooze On, the alarm will
ring at regular intervals of 11 minutes. If
4. The display shows the current set. Use the
or
key to select On/Off, press the
Select soft key.
5. If you select On, the display indicates you
to enter the time in HH:MM format. Use
the numeric keypad to enter.
you press the
key when the alarm
sounds, the option will be switched to
Snooze Off.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setup
Key Tone
You can also use the menu to adjust the audio
volume.
Every time you press
acknowledges it with
a
key, your handset
key tone. You can
a
disable the key tones for a silent use. In certain
error conditions, warning tone will sound
1. Press the Menu soft key.
a
when an incorrect key is pressed.
2. Press
or
key to choose HS Settings,
1. Press the Menu soft key.
then press the Select soft key.
2. Press
or
key to choose HS Settings,
3. Press the
key to choose Audio Setup
then press the Select soft key.
menu, press the Select soft key.
3. Press
or
key to choose Tone Setup
4. Use
or
key to choose Speaker V. or
menu, press the Select soft key.
Earpiece V., press Select soft key.
4. Press the Select soft key again to choose
Key Tone.
5. The display shows the current setting. Use the
or
key to choose the volume level
5. You can use
or
key to choose On or Off
(Volume 1 -Volume 5), press the Save soft key.
to enable or disable the function.
6. Press the Save soft key.
Note:
For normal use, we recommend you
leave the key tone enabled. This makes
the phone easier to use.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Contrast Setting
3. Press
or
key to choose Date & Time
menu, press the Select soft key.
The adjustment allows you to optimize the
visibility of the display by changing its contrast
according to the environment conditions.
4. Use
or
key to choose Date Format or
Time Format, press the Select soft key.
1. Press the Menu soft key.
5. You can use
or
key to choose the Date
Format (DD-MM/MM-DD) or the Time Format
(12-Hour/24-Hour), press the Save soft key
to save.
2. Press
or
key to choose HS Settings,
then press the Select soft key.
3. Press
or
key repeatedly to choose LCD
2. Setting date & time
Contrast, then press the Select soft key.
4. Use
or
key repeatedly to choose among
1. Perform steps 1 to 3 of previous paragraph.
the 17 available contrast levels, then press the
2. Press
or
key to choose Set Date or Set
Save soft key.
Time menu, press the Select soft key.
5. Press the
key to return to standby mode.
3. Enter the current date/time by numeric keypad
and press the Save soft key to save and exit.
Setting Date & Time
1. Date & Time Format
1. Press the Menu soft key.
Notes:
If you select 12-Hour, AM/PM will appear
on the right of the time in standby mode.
At step 3 you need to enter the time in 24-
2. Press
or
key to choose HS Settings,
Hour format.
then press the Select soft key.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Base
HS Reset
This function allows you to select
a
base from
If you reset the handset, all the features under HS
Settings menu will be restored to the factory
initial setting: Alarm, Audio Setup, Ring Setup,
Tone Setup, Language, HS Name, Auto Answer
and Date & Time. But LCD Contrast can not be
restored.
those already registered to the handset. You can
access the options by scrolling the menu.
1. Press the Menu soft key.
2. Press
or
key to choose HS Settings,
then press the Select soft key.
1. Press the Menu soft key.
2. Press
or
key to choose HS Settings,
3. Press
or
key to choose Select Base
then press the Select soft key.
menu, press the Select soft key.
3. Press
or
key to choose the HS Reset
4. You can use
you want, then press the Select soft key. If
you select non-existent base, the handset
or
key to select the base
menu, press the Select soft key. You will be
prompted to enter the PIN code.
a
4. Enter the PIN code (the default one is 0000),
then press the Reset soft key. If the PIN code
is validated all handset settings will return to
the factory default, otherwise a warning tone
will be heard and the settings will remain.
will sound a warning tone.
5. The display will show Selected BSX. Press the
Select soft key to confirm. A confirm tone will
be heard.
Result: After resetting, the handset will return to
standby mode.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
n Registration
The supplied handset is already registered with
the number 1. You can register to your base
additional handsets (up to 5 in total) in order to
share the same line with other people.
4. If the base is found, you will be prompted to
enter the PIN code (the default one is 0000).
Enter it then press the Select soft key. If the
PIN code is correct, the Registration tone will
sound and then the base assigns a number to
Before registering
should press and hold base unit
seconds until the In Use indicator starts
a
handset to the base, you
the handset, otherwise
a
warning tone will
key for about
sound, and then the handset returns to the
previous registration state.
5
flashing rapidly.
5. If the base is not found, the handset will
behave according to the Out of Range
condition.
1. Press the Menu soft key.
2. Press
or
key repeatedly to choose
the Registration, then press the Select
soft key.
3. Use
names list, press the Select soft key to
choose base to your necessary. The
or
key to scroll through the Base
a
handset will search for the requested base
and the relevant information will flash on
the LCD.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
n Calling with more than one Handset
If you have more than one handset registered to
Note:
the same base, you can make internal calls and
transfer an external call between the registered
handsets.
During the internal call, if an external call
comes in, the LCD will show the caller's
number. You should press the key to end
the internal call first then press the key
to answer the call.
Making an internal call
1. Press the
key, the LCD displays as follows,
Call transfer between handsets
then enter the number of the handset you
You can transfer an external call between the
handsets those are registered to the same base.
want to call.
Intercom
1. During an external call, press the
key then
1 2 3 4 5
enter the number of the handset you want to
transfer the call to.
2. If the destination handset is unavailable, the
handset will return to standby mode. If the
handset entered is valid, the called handset
will ring and display HSX Calling. The
2. If the called party can answer your call, he/she
can press the
key to talk with you. At this
time you can inform him/her of the incoming
call.
handset user can press the
the internal call.
key to answer
3. When the called party answers, press the
key or replace the handset to the base to
complete the transfer.
3. At the end of your conversation, press the
key.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a 3-way conference call
When you have both an external call and an
intercom call in progress, you can set up a three-
way conference call, like this:
1. During an external call, press the
key and
then the number of the handset you want to
join the 3-way call.
2. The called party press
key to answer.
3. The calling party can press the
the 3-way call.
key to start
4. Either of the two internal handsets can press
the
key to leave the conference call at any
time.
Note:
If one of the handsets drops the conference
call, the remaining handsets will continue the
conference.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
n Caller ID on call waiting
When you subscribe to Call Waiting service
from your local telephone company, the
telephone will display the name and number
of the second caller while you are having a
conversation.
Note:
If you have transferred an external call to
another handset, you cannot use the call
waiting function via the second handset.
Caller two's information
is displayed
Caller ID info displayed
Caller 1
4361234
Caller 1
4
Caller 2
2915678
1.When you are on the line, the telephone will
automatically display the name and number of
the second caller.
2.Press the Flash soft key to answer the second
caller.
3.When you have finished, press the Flash soft
key to continue with your conversation with the
first caller.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature List
DECT 6.0 technology
TONE/PULSE dialing mode selectable
FLASH time selectable
Call duration display
5 row dots matrix LCD display (128 x 64
dots matrix display)
Date & Time setting
Keypad lock
9 languages selectable
Up to 5 handsets for optional for one base
Up to 4 bases for optional for one handset
LCD contrast adjustable
Auto answer ON/OFF selectable
Alarm clock include snooze option
Handset Name setting
Phonebook with up to 50 groups
9 VIP ring tones setting for phonebook
entries
Backlit LCD screen and keypad
Redial book with up to 10 entries
10 melody ringer and volume selectable
Key tone ON/OFF selectable
Range alarm
Caller ID
FSK and DTMF dual system Caller ID
Caller ID / Call Waiting
Caller ID list with up to 40 entries
Incoming calls can be called back/added
to phonebook/deleted
Full handsfree speakerphone
Internal call
Call transfer
New call indicator
Message waiting
3-way conference call
Receiver/Speaker volume adjustable
Mute
Note:
The caller ID feature is only available if you
subscribe to Caller Display service from
your network provider.
PIN protection
Predialing
a
Redial, Flash, Pause
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
<100mW
Carrier Power
Modulation
GFSK
Charging time
Ambient temperature
Humidity
<
50 KHz
15 hours
Normal: 15 ~ 35 , Extreme: 0 ~ 40
0%~90%
Weight (grams)
Dimensions (mm)
Power Supply
Base: 131.4; Handset: 82.8
Base: 141 x 95 x 70; Handset: 125 x 46 x 24
Base input: 9V, 300mA; Handset input: Ni-MH: 1.2V x 3, 600mAh
? Design and specifications are subject to change without notice.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
Part 68 is a Federal regulation which requires equipment to be tested and registered with the
FCC prior to its connection to the network. This equipment complies with Part 68 of FCC
rules. On the bottom of the telephone is a label that contains, among other information, the
FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment.
You must, upon request, provide this information to your telephone company.
The Ringer Equivalence Number, which is used to determine the number of devices you may
connect to your phone line, indicates the amount of power that your telephone draws from the
telephone company line during ringing. If you have more than one telephone (or other terminal
device) connected to the telephone company line, you should total the ringer equivalence
numbers (REN s), and be sure that the total is not more than five. Your telephones may not ring
if the total is more than five. Also, in some rural locations, your telephone may not ring if the
REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party lines.
INSTALLATION This model telephone must be connected to the telephone company lines
through a modular jack. The required USOC for the modular jack is RJ11C for desk mounting
and RJ11W for wall mounting. The USOC number is printed on the label on the bottom of your
telephone.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HEARING-AID COMPATIBILITY The handset on your telephone will work with
magnetically-coupled hearing aids. You can use a hearing aid equipped with a T (Telephone)
switch.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone line, the
telephone company can temporarily disconnect your service. The telephone company must
then notify and allow you to correct the problem.
The telephone company may from time to time change its lines or equipment. They must notify
you if planned changes will affect your telephone service, to allow you to take steps to prevent
interruptions.
Part 15 regulates the electromagnetic energy emitted by equipment to minimize interference
to radio, television, and other wireless devices. This telephone complies with Part 15 of the
FCC Rules. In the unlikely event that interference occurs, move the telephone and/or radio,
television, etc. to increase the separation distance.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Repair
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Telephones manu-
factured by CORTELCO must be returned to us for repair. You can return your
telephone to CORTELCO for repair or replacement in accordance with our LIMITED
WARRANTY.
CORTELCO warrants THIS PRODUCT against defects in material and workmanship
in accordance with our LIMITED WARRANTY. If your telephone is returned for
repair, include a copy of your sales receipt containing the date-of-purchase. DO NOT
INCLUDE THE ORIGINAL SALES RECEIPT.
If date-of-purchase is not included, the factory date printed on the label on the
bottom of your telephone will be used as the date-of-purchase. The factory date
allows six months for distribution and sale of this product. If you return your
telephone for repair, the warranty period is not extended. The original date-of-
purchase continues to apply to your warranty.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after
the LIMITED WARRANTY has expired if you send it to us in a complete and
undamaged condition. The repaired unit will be shipped to you C.O.D., freight
collect.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for
repair, package it carefully, preferably in the original carton. Be sure to include
your return address, a copy of the sales receipt showing date-of-purchase, and a
note describing the problem you have with your Telephone. Shipping must be
prepaid. If the telephone is in warranty, it will be repaired or replaced, at our
option, at no cost to you, and it will be returned shipping prepaid.
Ship your telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
50
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO warrants it against
defects in material and workmanship for a period of one (1) year from the date of original
purchase. This warranty is in lieu of all other express warranties. During the warranty period,
CORTELCO agrees to repair or, at its option, replace the defective product, or any part of it
without charge for parts or labor. This is your exclusive remedy. This warranty does not cover
damage resulting from accident, misuse, abuse, improper installation or operation, lack of
reasonable care, the affixing of any attachment not provided by CORTELCO with the
product and loss of parts. The warranty is voided in the event any unauthorized person alters
or repairs the unit.
Telephone companies use different types of equipment and offer various types of services to
customers. CORTELCO does not warrant that this product is compatible with the type of
equipment of any particular phone company or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY
OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE, AS OF THE DATE ONE YEAR FROM THE ORIGINAL
51
Download from Www.Somanuals.com. All Manuals Search And Download.
PURCHASE OF THE PRODUCT. CORTELCO ASSUMES NO RESPONSIBILITY FOR
ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE EXCLUSION AND LIMITATION MAY NOT APPLY
TO YOU.
If failure occurs and your telephone is in warranty, service shall be provided by returning it to
CORTELCO - Repair Center, 1703 Sawyer Road, Corinth, Mississippi 38834, shipping
prepaid. The product will be repaired or replaced if examination by us determines the product
to be defective. Telephones received damaged as a result of shipping will require you to file a
claim with the carrier.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
|