Ver.1.01
Fanless, Ultra Low Voltage Celeron M 1.06GHz
BOX-PC 710 series
This product is an industrial personal computer (box computer®)
that has a Ultra Low Voltage version of Celeron M Processor
1.06GHz that enables completely natural-air-cooling (fanless)
operation.
The BX-710 series has a Ultra Low Voltage version of Celeron M
Processor, a 945GME chipset, and 1GB of DDR2 SDRAM.
The BX-710P2 series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as two slots of PCI buses.
The BX-710P4series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as four slots of PCI buses.
Various interfaces such as dual LAN / USB2.0 / CF card slot /
RS-232C and the slot-in 2.5 inches SATA hard disk bay unit being
installed, this product is widely usable as a platform based on the
OS for the general-purpose PC.
Embedded-type CPU and chip set have been adopted. The use
of readily available parts ensures the ease of the use of the
product. In addition, the use of CONTEC-customized BIOS
allows support to be provided at the BIOS level.
* Specifications, color and design of the products are subject to
change without notice.
OS
Model
Expansion Slot
(storage device)
BX-710-AC5000
－
－
BX-710P2-AC5000
BX-710P4-AC5000
PCI slot x 2
PCI/ISA slot x 4
Features
Adoption of ultra-low voltage Celeron M Processor 1.06GHz,
945GME chip set, and 1GB of memory
Safety design with an anti-disconnection mechanism and
BIOS setting retention function
A power-thrifty Ultra Low Voltage version Celeron M Processor
1.06GHz/FSB533MHz, an Intel® 945GME chipset, and 1GB of
memory as standard specifications. The adoption of an
embedded-type CPU and chipset enables a stable power supply.
Unnecessary trouble can be avoided by the use of clamps for
prevention of cable disconnection and the use of metal fittings for
prevention of CF card disconnection. Retention of CMOS data
by EEPROM allows the system to start up even when the battery
has run out. In addition, the use of a CONTEC-customized
BIOS (mfd. by Award) allows support to be provided at the BIOS
level.
Adoption of slot-in 2.5 inches SATA hard disk bay unit
Slot-in method is adopted allowing easy install / removal.
Structure free from mechanical moving parts (Windows
Embedded Standard-installed model)
Fan-less operation achieved by natural air-cooling
The use of a power-saving CPU and naturally-cooled cabinet
structure allows fanless operation.
The use of a CF card or a SSD for the storage device has
eliminated any moving parts, improving the levels of the
environment resistance (ambient temperature, impact, vibration),
reliability and quietness. It is possible to use the EWF function
of OS. It is designed for safety required for embedding purpose,
for example, prohibiting unwanted writing to the CF card or the
SSD with EWF function will relieve the concern about the writing
limits to the CF card or the SSD and prevent an unintentional
system alteration.
Dual LAN, USB2.0 x 6, CF card slots x 2, etc. located at the
front for easier maintenance
Extended interfaces such as 1000BASE-T x 2, USB2.0 x 6, serial
(RS-232C) x 2 are all placed at the front, providing excellent
maintenance advantages. In addition to a general-purpose
analog RGB interface, the product has an LVDS interface, which
enables dual screen display. Plus, it has two CF card slots
(Type I, bootable) that are very useful in enabling separate
handling of OS and data, allowing an operation style in which
maintenance data, system log, and/or collected data can be
taken out for further work at other locations.
* EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that
protects the disk from being actually written by redirecting the writing to RAM.
Installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series
For the installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series, it is easy to migrate
from the existing system.
Expansion slots to hold PCI bus boards (Model with
Expansion Slot).
BX-710P2-AC5 has two PCI slots.
BX-710P4-AC5 has four PCI slots.
Board size that can be attached is 240(L) x 107(H)[mm].
Supported OS
Windows XP Professional
Windows Embedded Standard 2009
BX-710-AC, BX710P2-AC, BX710P4-AC
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Ver.1.01
Installation Environment Requirements
CAUTION
Precautions when using products other than our options
Parameter
Requirement description
-
If a product other than our option is used, the normal operation may be
impaired or the functions may be limited.
Allowable instantaneous Less than 20ms
Power supply
specifications
power outage
One minute each for AC2.0kV (input - FG) 20mA
Dielectric strength
50MΩ (500VDC)
Packing List
0 - 50°C (SSD in use),
0 - 45°C (HDD in use)
Operating temperature
BX-710-AC5xxx BX-710P2-AC5xxx BX-710P4-AC5xxx
Name
Pcs.
Pcs.
Pcs.
Storage temperature
Humidity
-10 - 60°C
1
2
0
1
2
2
1
2
4
BOX-PC
10 - 90%RH (No condensation)
Not to be excessive
None
The attachment fittings
Floating dust particles
Corrosive gases
Slot cover
CF attachment fittings
AC cable
2
*4
2
*4
2
*4
1
1
1
AC line/±2kV,
Signal line/±1kV (IEC61000-4-4Level 3, EN61000-4-4
Level 3)
Screws for attachment fittings
Three-point sems screw (M4 x
8)
Line noise
Line-noise
4
4
4
Ambient
specifications
Screws for 2.5” drive, slot
cover, CF attachment fittings
Three-point sems screw (M3 x
6)
AC cable clamp
USB/ sound cable clamp
Contact discharge/±4kV (IEC61000-4-2 Level 2,
EN61000-4-2 Level 2)
Atmospheric discharge/±8kV (IEC61000-4-2 Level 3,
EN61000-4-2 Level 3)
resistance
Static
6
8
10
electricity
resistance
1
2
1
1
1 *3
1 *3
1
2
1
1
1 *3
1 *3
1
2
1
1
1 *3
1 *3
Vibration
resistance
*1
10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
10G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Sweep
resistance
Product guide (this sheet)
IPC Precaution List
Impact resistance *1
Royalty consent contract
Setup Procedure Document
Notes on using Windows
Embedded Standard
Grounding
Class D grounding (previous class 3 grounding)
1 *2 *3
1 *3
1 *2 *3
1 *3
1 *2 *3
1 *3
*1 When the HDD is not in use.
Recovery Media*1
*1 Please confirm latest information on the CONTEC homepage though the user's manual is
stored in Recovery Media. The installation method is described in this document as well as
the UsersManual. [File storing place: ¥Manual]
List of Options
*2 It is not packed to the Windows XP Professional pre-install model.
*3 It is not packed to the OS uninstall model.
*4 It is attached in advance to the main body 1pcs in CF install model.
CF Card
CF-1GB-B
CF-2GB-B
CF-4GB-B
CF-8GB-B
CF-1GB-A
CF-2GB-A
CF-4GB-A
CF-8GB-A
1GB CompactFlash for Fix Disk
2GB CompactFlash for Fix Disk
4GB CompactFlash for Fix Disk
8GB CompactFlash for Fix Disk
1GB CompactFlash for Fix Disk
2GB CompactFlash for Fix Disk
4GB CompactFlash for Fix Disk
8GB CompactFlash for Fix Disk
Component Life
(1) Battery
--- The internal calendar clock and CMOS
RAM are backed by a Lithium primary
battery. The backup time at a temperature
of 25°C with the power disconnected is 10
years or more.
TFT color liquid-crystal display
< Analog RGB types >
FPD-H21XT-AC
FPD-L21ST-AC
FPD-M21VT-AC
(2) HDD
--- The OS-installed model with Windows XP
Profettional uses a HDD for the OS storage
area. Estimated service life: 5 years or
15,000 power on hours, whichever comes
first.
(15inch 1024 x 768 dots,
Panel mounted type)
(12.1inch 800 x 600 dots,
Panel mounted type)
(10.4inch 640 x 480 dots,
Panel mounted type)
(3) CF, SSD
--- The OS-installed model with Windows
Embedded Standard 2009 uses a CF card or
a SSD for the OS storage area. Estimated
failure rates: 100,000 rewrite cycles,
500,000 hours MTBF
< LVDS&DVI input type >
FPD-H71XT-DC1 *1
(15inch 1024 x 768 dots,
Panel mounted type)
(12.1inch 800 x 600 dots,
Panel mounted type)
(6.4 inch 640 x 480 dots,
Panel mounted type)
(15inch 1024 x 768 dots,
Embedded type)
(12.1inch 800 x 600 dots,
Embedded type)
(10.4 inch 640 x 480 dots,
*
Replacement of expendables is handled as a repair (there will be a charge).
FPD-L71ST-DC1 *1
FPD-S71VT-DC1 *1
FPD-H75XT-DC1 *1
FPD-L75ST-DC1 *1
FPD-M75VT-DC1 *1
Difference from IPC-BX700 series
The difference point with the IPC-BX700 series is shown in the
following.
IPC-BX700 series
IPC-BX701 series
BX-710 series
CPU
Ultra Low Voltage Intel® Ultra Low Voltage Intel® Ultra Low Voltage Intel®
Celeron® M Processor
1.0GHz(FSB400MHz)
Intel® 855GME
Celeron® M Processor
1.0GHz(FSB400MHz)
Intel® 855GME
Celeron® M Processor
1.06GHz(FSB533MHz)
Intel® 945GME +
ICH7M-DH
Chip set
Memory
Embedded type)
512MB
１GB
１GB
*1 Please Purchase an optional cable for connection [ FPD-26M26M-005, FPD-26M26M-020,
FPD-26M26M-050 ].
System
resolution
(Max.)
1,600 x 1,200 (16,770,000 1,600 x 1,200 (16,770,000 2,048 x 1,536 (16,770,000
colors)
colors)
colors)
Display cable only for LVDS
LVDS I/F
None
LVDS I/F x 1
LVDS I/F x 1
FPD-26M26M-005
FPD-26M26M-020
FPD-26M26M-050
LVDS Cable (0.5m)
LVDS Cable (2m)
LVDS Cable (5m)
LAN
100BASE-TX/10BASE-T 1000BASE-T x 1,
1000BASE-T × 2
x 1
100BASE-TX/10BASE-T
x 1
Storage
PS/2 I/F
2.5 inch IDE HDD or
silicon disk drive
1
2.5 inch IDE HDD or
silicon disk drive
1
2.5 inch SATA HDD
None
Touch-panel cable for an analog RGB display
IPC-CBL3-2
IPC-CBL3-5
AT host Touch panel, COM cable (2m)
AT host Touch panel, COM cable (5m)
Terminal block for connecting the RAS connector
IPC-PSD-20
Terminal block for connecting the RAS
connector
BX-710-AC, BX710P2-AC, BX710P4-AC
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ver.1.01
Physical Dimensions
Component Name
BX-710-AC5
BX-710-AC5
BX-710P2-AC5
BX-710P4-AC5
BX-710P2-AC5
Name
Function
POWER SW
AC INLET
SW1
Power switch
AC power input connector
CMOS, RTC clear SW
General-purpose SW
Power ON display LED
SW2
POWER LED
ACCESS LED
STATUS LED
RESET
LINE OUT
MIC
IDE disk access display LED
Status LED
Hardware reset switch
Line out (f3.5 PHONE JACK)
Mike in (f3.5 PHONE JACK)
HDD slot (Serial-ATA)
S-ATA
CF1
CF card slot (IDE connection mastering)
CF card slot (IDE connection slaving)
BX-710P4-AC5
CF2
LAN A
Ethernet 1000BASE-TX/100BASE-T/10BASE-T RJ-45 connector
Ethernet 1000BASE-TX/100BASE-T/10BASE-T RJ-45 connector
USB port connector x 6
LAN B
USB
SERIAL A
SERIAL B
RAS
Serial port A connector (9pin D-SUB/male)
Serial port B connector (9pin D-SUB/male)
RAS function and RS-485 connector (15pin D-SUB/female )
A-RGB
Display (15pin D-SUB/female)
LVDS
LVDS (26pin half pitch connector)
PCI x 2 < P2 model >, PCI x 4 < P4 model >
Expansion Slot
BX-710-AC, BX710P2-AC, BX710P4-AC
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Ver.1.01
Minimum distance for installing / removing drive
System Configuration
CAUTION
-
-
The wall temperature must be under the product assurance temperature.
Installation Requirements
Please adjust the air current to prevent the reject heat from the product
staying around the product.
The BOX-PC can be installed in any orientation (1) through (3).
Avoid orientation (4) through (6) since it might not adequately
dissipate heat. In addition, take appropriate measures so that
the ambient temperature falls within the range of installation
environment conditions, such as keeping the system unit
well-ventilated and sufficiently spaced its surroundings.
-
Do not install this product into the fully-sealed space except the case in
which the internal temperature is adjustable by equipment such as air
conditioner. Troubles such as operational malfunctions could be occurred
by the temperature increase caused by long-term usage.
Installation Orientation
CAUTION
Note that even though the ambient temperature is within the specified range,
an operational malfunction may occur if there is other device generating
high heat; the radiation will influence the product to increase its
temperature.
Distances between the BOX-PC and Its Vicinity
BX-710-AC, BX710P2-AC, BX710P4-AC
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|