I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Istruzioni di installazione
Installatie-instructies
Instruções de Instalação
Instructions d´installation
Power Conditioner Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PACPC1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
PACPC1
LEGEND
Tighten Fastener
Security Wrench
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
By Hand
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
A mano
Von Hand
Com a mão
A mano
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Met de hand
À la main
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PACPC1
Installation Instructions
TOOLS REQUIRED FOR INSTALLATION
5/32"
Security
(Provided)
5/32"
(Provided)
3/32"
Security
(Provided)
PARTS
A (1)
(includes cord)
D (1)
B (1)
F (1)
5/32"
(Security)
C (1)
E (1)
3/32"
(Security)
G (1)
5/32"
J (1)
8-32 x 3/8"
K (2)
1/4-20 x 1/4"
L (2)
#6 x 1"
M (2)
.625x.312x.750
N (4)
1/4"
H (2)
1/4-20 x 1-1/4"
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
PACPC1
INSTALLATION
Attaching to Drywall
(D)
1. Attach bracket (D) to drywall using two #6 x 1" drywall
screws (L). (See Figure 1)
(C)
NOTE: Do NOT overtighten drywall screws.
2. Proceed to Installing Conditioner.
(D)
(K) x 2
Conditioner to be Attached Horizontally
(L) x 2
Figure 1
Attaching to Wood Stud
1. Drill two 0.08" pilot holes into wood stud. (See Figure 2)
2. Attach bracket (D) to wall using two #6 x 1" drywall
screws (L).
Conditioner to be Attached Vertically
Figure 3
3. Proceed to Installing Conditioner.
Wood
Stud
2. Attach pole clamp (B) around the pole to the pole mount
bracket using two 1/4-20 x 1-1/4" buttonhead security
screws (H), four 1/4" washers (N), and two spacers (M).
(See Figure 4)
1
(D)
(L) x 2
2
(B)
Wall
(N) x 4
(M) x 2
Figure 2
Attaching to 1-1/2" NPT Pole
1. Attach bracket (D) to pole mount bracket (C) using two
1/4-20 x 1/4" buttonhead screws (K). (See Figure 3)
1-1/2" NPT Pole
(H) x 2
NOTE: The bracket can be installed for either horizontal or
(Horizontal Attachment Shown)
vertical attachment of the conditioner. (See Figure 3)
Figure 4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PACPC1
Installation Instructions
Installing Conditioner
1. Insert conditioner slots onto Phillips screws in bracket.
(See Figure 5)
2. Slide conditioner left or right. (See Figure 5)
3. Remove conditioner to adjust Phillips screws in bracket as
necessary for desired tension in mount.
Conditioner
2
Slots
1
Conditioner
Bracket
Screws (x 2)
(Pole mount shown)
Figure 5
4. OPTIONAL: For additional security, insert and tighten one
8-32 x 3/8" buttonhead security screw (J) through the
bracket into the conditioner. (See Figure 6)
NOTE: Use optional security screw in pole mount application
only.
Conditioner
(J) x 1
(Horizontal Attachment Shown)
Figure 6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
PACPC1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PACPC1
Installation Instructions
USA/International
Europe
A
P
F
A
P
F
8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
31 (0)20 5708923
31 (0)20 5708989
Asia Pacific
A
Room 30I, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA. Post Code: 518112
8832-000240
¤2007 Chief Manufacturing
www.chiefmfg.com
09/07
P
F
+86-755-8996 9226 ; 8996 9236 ; 8996 9220
+86-755-8996 9217
Download from Www.Somanuals.com. All Manuals Search And Download.
|