START
Click the button and follow the in-
structions.
CATEYE STRADA CADENCE
CC-RD200
Quick Start
Download from Www.Somanuals.com. All Manuals Search And Download.
This PDF contains a movie file.
When you click on the movie screen, a message regarding security appears. Click the
“Trust in the text” or “Play” button to close the message.
Click the screen again to play the movie.
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Cover
Contents
CATEYE STRADA CADENCE
Quick Start Manual
Click the item you wish to view.
Setting up the computer
How to install the sensor
How to install the bracket (movie)
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of buttons
Set up the computer by operating the buttons as follows.
Check the button position before you start setting up.
Back
MENU
MODE
Press the MENU button and the MODE
button on the back of the computer.
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Clear all data (initialization)
Clear all data (initialization)
Setting the speed unit
Press the AC button on the back of the computer.
After full lighting of the screen, the computer switch-
es to the speed unit setting screen to start setup.
AC
Entering the tire
circumference
Setting the clock display
Setting the hour
Setting the minute
Full lighting
Setting the speed unit
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Setting the speed unit
When the MODE button is pressed, either “km/h” or “mph”
is selected for the speed unit display. Select the display of
your choice.
Clear all data (initialization)
Setting the speed unit
After selecting, press the MENU button to proceed to the
next step “Entering the tire circumference”.
Entering the tire
circumference
Setting the clock display
Setting the hour
Setting the speed unit
↔
km/h
mph
To the next step
MENU
Setting the minute
MODE
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Entering the tire circumference
Clear all data (initialization)
Setting the speed unit
Enter the tire circumference (mm) of your bicycle with 4
digits using the tire circumference reference table.
Pressing the MODE button increases the value flashing,
and pressing and holding the MODE button moves to the
next digit.
Entering the tire
circumference
After entering, press the MENU button to proceed to the
next step “Setting the clock display”.
Setting the clock display
Setting the hour
Entering the tire
circumference
To the next step
Move digit
To the next step
MENU
Tire circum-
ference refer-
ence table
Setting the minute
MODE
MODE
(Press and hold)
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Setting the clock display
Clear all data (initialization)
Setting the speed unit
When you press and hold the MODE button, “24h” flashes.
When the MODE button is pressed, either “12h” or “24h”
is selected for the clock display. Select the display of
your choice.
After selecting, press and hold the MODE button to pro-
ceed to the next step “Setting the hour”.
Entering the tire
circumference
Setting the clock display
Setting the hour
Clock display
↔
24h
12h
To the next step
Setting the minute
MODE
MODE
(Press and hold)
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Setting the hour
Clear all data (initialization)
Setting the speed unit
Pressing the MODE button increases the value flashing
(“Hour” of the clock). Enter any value.
After entering, press and hold the MODE button to pro-
ceed to the next step “Setting the minute”.
Entering the tire
circumference
Setting the clock display
Setting the hour
Hour
To the next step
To the next step
Setting the minute
MODE
MODE
(Press and hold)
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Setting the minute
Pressing the MODE button increases the value flashing
(“Minute” of the clock). Enter any value (Pressing and
holding MODE rapidly increases the value).
Clear all data (initialization)
Setting the speed unit
After entering, press the MENU button to switch to the
measuring screen.
Entering the tire
circumference
Setting the clock display
Setting the hour
Minute
Setup is completed
To the measuring screen
To the next step
MENU
Setting the minute
MODE
Measuring screen
(Setup completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Now, setup of the computer is completed.
Clear all data (initialization)
Setting the speed unit
If the bracket and sensor are not installed on your bicycle,
return to Contents, click “How to install the bracket” and
How to install the sensor”, and then install them accord-
ing to the instructions.
Entering the tire
circumference
Setting the clock display
Setting the hour
Measuring screen
Setting the minute
Measuring screen
(Setup completed)
Return
Return toContents
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the bracket
• The Bracket being used in this movie is for wireless products and there is no wire attached.
• When you install the bracket band to your bicycle, tighten it so the wire will not be pinched by the stem
or handlebar.
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare the following parts from the packaged items.
Wheel magnet
Cadence magnet
ce sensor
Snsor
Nylon ties (x10)
Sensor rubber pad
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Install the speed sensor
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Temporarily secure the speed sensor to the inside
of the left chain stay of your bicycle with two nylon
ties.
Tighten the speed sensor to such an extent that it
can be moved.
ylon ties
Speed snor
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Front
Route the cable
Chain Stay
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Install the wheel magnet
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Temporarily secure the wheel magnet to the left
spoke of the rear wheel.
Tighten the wheel magnet to such an extent that it
can be moved.
ear wheel spoke
el magnet
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Speed sensor
To the SENSOR LINE
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Install the cadence sensor
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Temporarily secure the cadence sensor to the out-
side of the left chain stay of your bicycle with two
nylon ties.
* When the clearance with the cadence magnet is
more than 3 mm, install the cadence sensor with
sensor rubber pads in layers. When temporarily
securing, keep allowance for sensor rubber pads.
Adjust the positions of the
sensor and magnet
ylon ties
Left Chain Stay
Adjust the clearance between
the sensor and magnet
Front
Route the cable
nce sensor
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Install the cadence magnet
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Temporarily secure the cadence magnet to the in-
side of the left crank with nylon ties.
Tighten the cadence magnet to such an extent that
it can be moved.
Left crank (Iside)
ylon ties
Adjust the positions of the
sensor and magnet
Cadence magnet
Adjust the clearance between
the sensor and magnet
Cadence sensor
To the SENSOR LINE
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Adjust the positions of the sensor and magnet
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Adjust the positions so that the wheel magnet pass-
es through the SENSOR LINE of the speed sen-
sor, and the cadence magnet passes through the
SENSOR LINE of the cadence sensor.
SENSOR LINE
(Cadencsor)
eel magnet
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
SR LINE
(Speed sensor)
Route the cable
Cadence
magnet
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Adjust the clearance between the sen-
sor and magnet
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Adjust the clearances between the speed sensor and
wheel magnet and the cadence sensor and cadence
magnet, so that both of them are within 3 mm.
* When the clearance between the cadence sensor
and cadence magnet is more than 3 mm, install the
cadence sensor with sensor rubber pads in layers.
3 mm
Left Chain Stay (Outside)
Left Chain Stay (Inside)
Adjust the positions of the
sensor and magnet
3 mm
Adjust the clearance between
the sensor and magnet
Speed sensor
Wheel magnet
Route the cable
Cadence sensor
Fixing the sensor and magnet
(Installation is completed)
Cadence magnet
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Route the cable
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Fix the wire to the frame with nylon ties where ap-
plicable, and route it to the handle while winding
around the brake cable. Cut off any excess nylon tie
using a nipper.
Caution: Adjust this
section so that the wire is
not stretched when you turn the handle.
Nylon ties
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Return
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Fixing the sensor and magnet
Install the speed sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Firmly tighten each sensor and magnet, and cut off
any excess nylon tie using a nipper.
Now, sensor installation is completed. See how to in-
stall the bracket, and then complete the installation.
When the computer is not set up, return to Con-
tents, click “Setting up the computer”, and follow
the instructions.
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Return
Return toContents
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to Contents
CATEYE STRADA CADENCE
Quick Start Manual
Setting up the computer
Tire circumference reference table
ETRTO Tire size
47-203 12x1.75
54-203 12x1.95
40-254 14x1.50
47-254 14x1.75
40-305 16x1.50
47-305 16x1.75
54-305 16x2.00
28-349 16x1-1/8
37-349 16x1-3/8
32-369 17x1-1/4 (369)
40-355 18x1.50
47-355 18x1.75
32-406 20x1.25
35-406 20x1.35
L (mm)
935
ETRTO Tire size
40-406 20x1.50
47-406 20X1.75
50-406 20x1.95
28-451 20x1-1/8
37-451 20x1-3/8
37-501 22x1-3/8
40-501 22x1-1/2
47-507 24x1.75
50-507 24x2.00
54-507 24x2.125
25-520 24x1 (520)
L (mm)
1490
1515
1565
1545
1615
1770
1785
1890
1925
1965
1753
1785
1795
1905
ETRTO Tire size
25-559 26x1 (559)
32-559 26x1.25
37-559 26x1.40
40-559 26x1.50
47-559 26x1.75
50-559 26x1.95
54-559 26x2.10
57-559 26x2.125
58-559 26x2.35
75-559 26x3.00
28-590 26x1-1/8
37-590 26x1-3/8
37-584 26x1-1/2
L (mm)
1913
1950
2005
2010
2023
2050
2068
2070
2083
2170
1970
2068
2100
1920
ETRTO Tire size
20-571 650x20C
23-571 650x23C
25-571 650x25C 26x1 (571)
40-590 650x38A
40-584 650x38B
25-630 27x1 (630)
28-630 27x1-1/8
32-630 27x1-1/4
37-630 27x1-3/8
18-622 700x18C
19-622 700x19C
20-622 700x20C
23-622 700x23C
25-622 700x25C
L (mm)
1938
1944
1952
2125
2105
2145
2155
2161
2169
2070
2080
2086
2096
2105
ETRTO Tire size
28-622 700x28C
30-622 700x30C
32-622 700x32C
L (mm)
2136
2146
2155
2130
2168
2180
2200
2224
2235
2242
2268
2288
2326
940
1020
1055
1185
1195
1245
1290
1300
1340
1340
1350
1450
1460
700C Tubular
35-622 700x35C
38-622 700x38C
40-622 700x40C
42-622 700x42C
44-622 700x44C
45-622 700x45C
47-622 700x47C
54-622 29x2.1
24x3/4 Tubular
28-540 24x1-1/8
32-540 24x1-1/4
60-622 29x2.3
650C Tubular 26x7/8
Measure the tire circumference (L) of your bicycle
Adjust the tire pressure properly. With the rider’s weight applied on the bicycle,
roll the wheel one tire revolution with reference to a marker such as the valve, and
measure the travel distance on the ground.
L mm
Return
Download from Www.Somanuals.com. All Manuals Search And Download.
|