MA0307-EA
Operation Guide 2673
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• This watch is equipped with two color LCD panels. For
the sake of simplicity, the screen shots in this manual
are shown using only one color.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
General Guide
• Press Cto change from mode to mode.
• In any mode, press Lto illuminate the display.
Countdown Timer Mode
Stopwatch Mode
Timekeeping Mode
Animation Mode
World Time Mode
Alarm Mode
Press
C.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Pressing Din the Timekeeping Mode cycles through available screen formats as
shown below.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
Seconds Screen
Month – Day
Screen
Month – Day
Screen (color)
Seconds Screen
(color)
To toggle the Timekeeping Mode time between DST and Standard Time
PM indicator Day of week
1. In the Timekeeping Mode, hold down Auntil the
DST indicator
Press
.
seconds start to flash, which indicates the setting
screen.
2. Press Cto display the DST setting screen.
ON
3. Press Dto toggle between Daylight Saving Time (
)
OFF
and Standard Time (
4. Press Ato exit the setting screen.
).
Seconds
Hour : Minutes
Month – Day
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
• When a color screen (seconds screen, month-day screen) is selected in the
Timekeeping Mode, the current time that appears at the bottom of the display in
other modes is also shown in color.
Using Graphic Animations
Read This Before You Set the Time and Date !
In the Animation Mode, the current time is shown in the
lower part of the display, and a graphic animation is
displayed in the center of the display. You can specify one
of three different animation patterns.
Animation pattern
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.
You can also configure the Animation Mode so it
automatically displays the current time (as kept in the
Timekeeping Mode) for about three seconds whenever
you angle the watch towards your face for reading.
To set the time and date
1. In the Timekeeping Mode, hold down Auntil the
seconds start to flash, which indicates the setting
screen.
2. Press Cto move the flashing in the sequence shown
below to select other settings.
Timekeeping Mode time
(Hour : Minutes)
Animation Patterns
You can select any one of the following three animation
patterns for the Animation Mode.
• Animal (Dolphin → Dog → Cat)
• Baby-G (B → A → B → Y → G)
• Seconds count of current time
Seconds
Message
DST
Day
City Code
Year
Hour
Minutes
12/24-Hour
Format
Month
To select an animation pattern
1. Use Cto enter the Animation Mode.
2. In the Animation Mode, each press of Dcycles
through the animation patterns in the sequence shown
below.
3. When the setting you want to change is flashing, use Dand Bto change it as
described below.
Screen
To do this:
Do this:
Animal
Baby-G
Seconds
50
00
Reset the seconds to
Press D.
Press D.
ON
Toggle between Daylight Saving Time (
)
OFF
OFF
and Standard Time (
)
Preset Message Display
Change the city code
Use D(east) and B(west).
Use D(+) and B(–).
Press D.
TYO
When the Animal animation pattern is selected, the watch will also display preset
message selected by you in the Timekeeping Mode at the timing shown below.
P10:58
Change the hour or minutes
12H
Toggle between 12-hour (
) and 24-hour
Dolphin
Message
Dog
Cat
12H
24H
(
) timekeeping
2003
6-30
Change the year
Use D(+) and B(–).
• Note that the preset message does not appear if you disable the preset message
function.
Change the month or day
Change the message
OFF
To select a preset message
1. Use Cto enter the Timekeeping Mode.
Message
•
For full information on city codes, see the “City Code Table”.
• See “Daylight Saving Time (DST)” for details about DST setting.
2. In the Timekeeping Mode, hold down Auntil the
seconds start to flash, which indicates the setting
screen.
• The preset message you select here appears in the Animation Mode. See “Using
Graphic Animations for more information.
”
3. Press Cnine times to advance to the preset message
• See the list of preset messages for information about the preset messages that
selection screen.
are available.
4. Use D(+) and B(–) to scroll through the preset
4. Press Ato exit the setting screen.
messages until the one you want appears on the
display.
• To disable the preset message function, display
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range
of midnight to 11:59 a.m. The A and P indicators are not displayed with the current
time at the bottom of the display in other modes.
OFF
On/Preset message
function disabled (Off)
in step 4.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 2673
Reference
City Code Table
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
City
GMT
City
Other major cities in same time zone
Code
Differential
PPG PAGO PAGO
HNL HONOLULU
ANC ANCHORAGE
–11
–10
–09
PAPEETE
NOME
Auto Display
SAN FRANCISCO, LAS VEGAS, VANCOUVER, SEATTLE,
DAWSON CITY
EL PASO, EDMONTON
HOUSTON, DALLAS/FORT WORTH, NEW ORLEANS,
MEXICO CITY, WINNIPEG
MONTREAL, DETROIT, MIAMI, BOSTON, PANAMA CITY,
HAVANA, LIMA, BOGOTA
LAX LOS ANGELES
–08
–07
–06
Auto Display continually changes the contents of the
digital display.
DEN
CHI
DENVER
CHICAGO
To turn off Auto Display
Press any button (except for L) to turn off Auto Display.
NYC
CCS
NEW YORK
CARACAS
–05
–04
–03
LA PAZ, SANTIAGO, PORT OF SPAIN
SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO
To turn on Auto Display
RIO RIO DE JANEIRO
In the Timekeeping Mode, hold down Cfor about three
seconds until the watch beeps.
• Note that Auto Display cannot be performed while a
setting screen is on the display.
LON
LONDON
+00
+01
+02
DUBLIN, LISBON, CASABLANCA, DAKAR, ABIDJAN
PAR
BER
CAI
PARIS
BERLIN
CAIRO
MILAN, ROME, MADRID, AMSTERDAM, ALGIERS,
HAMBURG, FRANKFURT, VIENNA, STOCKHOLM
ATHENS, HELSINKI, ISTANBUL, BEIRUT, DAMASCUS,
CAPE TOWN
JRS JERUSALEM
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
JEDDAH
TEHRAN
DUBAI
KABUL
KARACHI
DELHI
DHAKA
YANGON
BANGKOK
+03
+3.5
+04
+4.5
+05
+5.5
+06
+6.5
+07
KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI, MOSCOW
SHIRAZ
ABU DHABI, MUSCAT
Auto Return Features
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically saves any settings you
have made up to that point and exits the setting screen.
MALE
MUMBAI, KOLKATA
COLOMBO
Scrolling
The Band Dbuttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
JAKARTA, PHNOM PENH, HANOI, VIENTIANE
SINGAPORE, KUALA LUMPUR, BEIJING, TAIPEI, MANILA,
PERTH, ULAANBAATAR
HKG HONG KONG
+08
SEL
TYO
ADL
SYD
NOU
SEOUL
TOKYO
ADELAIDE
SYDNEY
NOUMEA
+09
PYONGYANG
Initial Screens
+9.5
+10
+11
+12
DARWIN
MELBOURNE, GUAM, RABAUL
PORT VILA
When you enter the World Time Mode, the data you were viewing when you last
exited the mode appears first.
WLG WELLINGTON
CHRISTCHURCH, NADI, NAURU ISLAND
*Based on data as of December 2002.
Timekeeping
00
• Resetting the seconds to
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
00
reset to
without changing the minutes.
• The year can be set in the range of 2000 to 2039.
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
World Time
• The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
• The current time in all World Time Mode cities is calculated in accordance with the
Greenwich Mean Time (GMT) differential for each city, based on the current Home
City time setting in the Timekeeping Mode.
• The GMT differential is the time difference of the time zone where the city is located
from Greenwich Mean Time.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC) data.
Auto Time Display Precautions
• The watch may not display the current time if its face is
more than 15 degrees above or below parallel. Make
sure that the back of your hand is parallel to the ground.
• The watch returns to the Animation Mode in about three
seconds, even if you keep the watch pointed towards
your face.
More than 15 degrees
too high
• Static electricity or magnetic force can interfere with
proper auto time display. If the watch does not display
the current time automatically, try moving the watch
back to the starting position (parallel with the ground)
and then tilt it back toward you again. If this does not
work, drop your arm all the way down so it hangs at
your side, and then bring it back up again.
• Under certain conditions, the watch may not display the current time until about one
second after you turn the face of the watch towards you. This does not necessarily
indicate malfunction.
• You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of auto time display,
and does not indicate a problem with the watch.
Backlight Precautions
The backlight uses an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
In any mode, press Lto illuminate the display for about two seconds.
• The electro-luminescent panel that provides illumination loses power after very long
use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• The backlight automatically turns off whenever an alarm sounds.
• Frequent use of the backlight shortens the battery life.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|