Casio Electronic Keyboard CTK 4000 User Manual

USER’S GUIDE

Please keep all information for future reference.

Safety Precautions

Before trying to use the keyboard, be sure to read the

separate “Safety Precautions”.

GUÍA DEL USUARIO

Guarde toda la información para futuras consultas.

Precauciones de seguridad

Antes de intentar usar el teclado, asegúrese de leer

las “Precauciones de seguridad” separadas.

CTK4000/5000ES1B

Download from Www.Somanuals.com. All Manuals Search And Download.

Important!

Please note the following important information before using this product.

• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check

the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is

seriously damaged.

• Never attempt to recharge batteries.

• Do not use rechargeable batteries.

• Never mix old batteries with new ones.

• Use recommended batteries or equivalent types.

• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.

• Replace batteries as soon as possible after any sign they are getting weak.

• Do not short-circuit the battery terminals.

• The product is not intended for children under 3 years.

• Use only a CASIO AD-5 (for CTK-4000) or AD-12 (for CTK-5000) adaptor.

• The AC adaptor is not a toy.

• Be sure to disconnect the AC adaptor before cleaning the product.

This mark applies in EU countries only.

Manufacturer:

CASIO COMPUTER CO.,LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:

CASIO EUROPE GmbH

Bornbarch 10, 22848 Norderstedt, Germany

● Company and product names used in this manual may be registered trademarks of others.

● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal

use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.

● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,

DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE

USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

● The contents of this manual are subject to change without notice.

E-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

General Guide............................. E-4

Playing Built-in Songs..............E-25

Using the 10-key Pad ( ) .................................E-6

Playing the Demo Songs ................................. E-25

Playing Back a Particular Song........................ E-26

Increasing the Selection of Songs ................... E-28

FUNCTION Button ( ) Functions .....................E-6

Getting Ready to Play ................ E-8

Using Built-in Songs to

Preparing the Music Stand.................................E-8

Power Supply .....................................................E-8

Master Keyboard Play ..............E-29

Phrases............................................................ E-29

Playing the Digital Keyboard..... E-9

Step Up Lesson Flow....................................... E-29

Turning on Power and Playing ...........................E-9

Selecting the Song, Phrase, and

Part You Want to Practice................................ E-30

Using Headphones.............................................E-9

Lessons 1, 2, and 3.......................................... E-31

Lesson Settings ............................................... E-32

Using Auto Step Up Lesson............................. E-34

Changing Keyboard Response to

Touch Pressure (Touch Response)..................E-10

Adjusting Display Contrast ...............................E-10

Using the Metronome.......................................E-11

Music Challenge

Keyboard Game ........................E-35

Controlling the

Keyboard Sounds..................... E-12

Select from a variety of musical

instrument sounds ............................................E-12

Using Auto Accompaniment ......E-36

Playing the Rhythm Part Only.......................... E-36

Playing All Parts............................................... E-37

Using Auto Accompaniment Effectively ........... E-39

Using One-Touch Preset ................................. E-40

Using Auto Harmonize..................................... E-41

Layering Two Tones.........................................E-13

Splitting the Keyboard between Two

Different Tones.................................................E-13

Using Reverb....................................................E-14

Using Chorus....................................................E-14

Using a Pedal...................................................E-15

Editing Auto Accompaniment

Changing the Pitch

Patterns......................................E-42

(Transpose, Tuning, Octave Shift)....................E-15

Using the Pitch Bend Wheel to Shift the

Pitch of Notes (CTK-5000 Only).......................E-16

Saving Keyboard Setups to

Registration Memory ................E-46

Sampling Sounds and

Playing Them on the

To save a setup to registration memory........... E-47

To recall a setup from registration memory ..... E-47

Digital Keyboard....................... E-17

Connection and Preparation.............................E-17

Recording Your

Keyboard Play...........................E-48

Sampling and Playing a Melody Sound

(Melody Sampling) ...........................................E-18

Recording and Playing Back Keyboard Play....... E-48

Incorporating a Sampled Sound into a

Drum Set (Drum Sampling)..............................E-20

Using Tracks to Record and Mix Parts ............ E-49

Recording Two or More Songs, and

Selecting One for Playback.............................. E-51

Other Sampling Functions................................E-22

Recording while Playing Along with a

Built-in Song..................................................... E-51

Saving Recorded Data on an

External Device................................................ E-52

E-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Other Useful Digital Keyboard

Reference...................................E-70

Troubleshooting ............................................... E-70

Specifications................................................... E-72

Operating Precautions ..................................... E-73

Error Messages................................................ E-74

Song List.......................................................... E-75

Functions .................................. E-53

Changing the Scale of the Keyboard................E-53

Using Music Preset ..........................................E-56

Using the Arpeggiator.......................................E-56

Deleting User Song Data..................................E-57

Deleting All Data in Digital Keyboard

MIDI Implementation Chart

Memory ............................................................E-58

Using a Memory Card

(CTK-5000 Only)........................ E-59

SD Memory Card and Card Slot

Precautions ......................................................E-59

Inserting and Removing an

SD Memory Card..............................................E-60

Formatting an SD Memory Card.......................E-60

Saving Digital Keyboard Data to an

SD Memory Card..............................................E-61

Loading Data from an SD Memory Card into

Digital Keyboard Memory .................................E-62

Deleting Data from an SD Memory Card..........E-63

Playing Back Data from an

SD Memory Card..............................................E-64

SD Memory Card Error Messages ...................E-64

Connecting External Devices..... E-65

Connecting a Computer ...................................E-65

MIDI Settings....................................................E-66

Storing and Loading Digital Keyboard

Memory Data....................................................E-68

Connecting to Audio Equipment.......................E-69

Included Accessories

Separately Available Accessories

• You can get information about accessories that

are separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

● Music Stand

● Song Book

● Leaflets

• Safety Precautions

• Appendix

• Other (Warranty, etc.)

http://world.casio.com/

Items included as accessories are subject to change without notice.

E-3

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

• In this manual, the term “Digital Keyboard” refers to the CTK-4000/CTK-5000.

• Illustrations in this User’s Guide show the CTK-5000.

• In this manual, buttons and other controllers are identified using the numbers shown below.

7 8 9 bk bl bm

bs bt ck cl cm cn

dm dndo dp

co cp cq crcs ct

dr ds

E-4

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

POWER button ☞E-9, 24, 44, 47, 49, 55, 68

VOLUME knob ☞E-9

Area1, TR2, WATCH button

☞E-19, 31, 46, 47, 50, 55

Area2, TR3, REMEMBER button

☞E-19, 32, 46, 47, 50, 55

PRESET SCALE button (CTK-4000)

SCALE EDITOR button (CTK-5000) ☞E-53, 54, 55

Area3, TR4, NEXT button ☞E-19, 30, 46, 47, 50, 55

Area4, TR5, AUTO button ☞E-19, 34, 46, 47, 50, 55

RECORDER button ☞E-48, 49, 50, 51, 52

RHYTHM EDITOR button ☞E-42, 43

STORE, TR6, MUSIC CHALLENGE button

☞E-19, 35, 47, 50, 55

METRONOME, BEAT button ☞E-11

INTRO, REPEAT button ☞E-27, 32, 39, 42, 43

SPLIT button ☞E-13, 14

LAYER button ☞E-13, 16

NORMAL/FILL-IN, REW button

☞E-26, 30, 36, 39, 42, 43

AUTO HARMONIZE/ARPEGGIATOR, TYPE button

☞E-41, 56, 57

VARIATION/FILL-IN, FF button

☞E-26, 30, 39, 42, 43

SAMPLING button ☞E-18, 19, 20, 21, 60

FUNCTION button ☞E-6

SYNCHRO/ENDING, PAUSE button

☞E-26, 39, 40, 42, 43

START/STOP, PLAY/STOP button

☞E-25, 26, 28, 31, 32, 36, 48, 50, 51, 52, 64

CARD, SAVE/LOAD button (CTK-5000 only)

☞E-60, 61, 62, 63, 64

ACCOMP ON/OFF, CHORDS,

PART SELECT button

☞E-25, 28, 30, 32, 37, 41, 42, 43, 52, 67

Speakers

Song Bank list

Music Preset list

TEMPO buttons ☞E-11, 27, 40

Display

TONE, MUSIC PRESET button

☞E-9, 12, 18, 20, 22, 24, 56

Rhythm list

RHYTHM, ONE TOUCH PRESET button

☞E-12, 19, 20, 21, 22, 36, 40, 43, 47, 48, 51, 53, 55

Tone list

PITCH BEND wheel (CTK-5000 only) ☞E-16

CHORD root names ☞E-37

Percussion instrument list ☞E-12

SD CARD SLOT (CTK-5000 only) ☞E-60

SONG BANK button ☞E-26, 28, 30, 51

Number buttons, [–] [+] buttons ☞E-6

BANK, CHORD/TR1, LISTEN button

☞E-19, 31, 46, 47

el em en eo

USB port ☞E-65

DC 9V terminal (CTK-4000)

DC 12V terminal (CTK-5000) ☞E-8

SUSTAIN/ASSIGNABLE JACK ☞E-15

LINE OUT R, L/MONO jack (CTK-5000 only)

☞E-69

PHONES/OUTPUT jack (CTK-4000)

PHONES jack (CTK-5000) ☞E-9, 69

AUDIO IN jack ☞E-17, 69

E-5

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

Using the 10-key Pad ( )

FUNCTION Button ( ) Functions

Use the number buttons and the [–] and [+] buttons to change

the settings of the parameters that appear in the upper left

area of the display.

You can use the FUNCTION button ( ) to adjust the reverb

effect, to delete data, and to perform a wide range of other

Digital Keyboard operations.

To select a function

1. Press

to display the function menu.

2. Use the

(10-key) [4] (

to display the function you want.

) and [6] (

) keys

• You can exit the function menu by pressing

• After selecting functions 8 through 12, press the

Setting

(10-key) [7] (ENTER) key to display the menu item’s

submenu. Then use [4] ( ) and [6] ( ) to select an

item. You can exit a submenu by pressing the

(10-key) [9] (EXIT) key.

S t . G r P n o

3. Refer to the indicated pages for details about

each function.

Number Buttons

Use the number buttons to enter numbers and values.

• Enter the same number of digits as the currently displayed

value.

Example: To enter tone number 001, input 0 3 0 3 1.

• Negative values cannot be input using the number buttons.

Use [–] (decrease) and [+] (increase) instead.

[–] and [+] Buttons

You can use the [–] (decrease) and [+] (increase) buttons to

change the displayed number or value.

• Holding down either button scrolls the displayed setting.

• Pressing both buttons at the same time will revert to the

initial default setting or the recommended setting.

E-6

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

See

Page

Function

Transpose

Display

Trans.

E-15

E-40

E-28

E-10

E-15

E-14

Accompaniment Volume

Song Volume

AcompVol

Song Vol

Touch

Touch Response

Tuning

Tune

Reverb

Chorus

Sampling

SAMPLING

AutoStrt

AutoStop

(Protect)

LESSON

Speak

Automatic Sampling Start

Automatic Sampling Stop

Sampled Tone Protect

Step Up Lesson

Voice Fingering Guide

Note Guide

E-22

E-23

E-24

E-32

E-33

NoteGuid

Scoring

PhraseLn

OTHER

ArpegHld

Jack

Performance Evaluation

Phrase Length

10 Other Settings

Arpeggiator Hold

Pedal Effect

E-57

E-15

E-16

Pitch Bend Range

(CTK-5000 only)

Bend Rng

Accompaniment Scale

LCD Contrast

AcompScl

Contrast

MIDI

E-55

E-10

11 MIDI Settings

Keyboard Channel

Navigate Channels

Local Control

Keybd Ch

Navi. Ch

Local

E-66

E-67

Accomp Out

AcompOut

DELETE

(tone name)

12 Delete

Sampled Sound Delete

User Rhythm Delete

User Song Delete

All Data Delete

E-23

(rhythm name) E-45

(song name)

All Data

E-57

E-58

• The tone and other parameters revert to their initial

defaults whenever you turn on power (page E-9).

E-7

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Ready to Play

Using Batteries

Preparing the Music Stand

• Be sure to turn off power before loading batteries.

• It is up to you to prepare six commercially available

D-size batteries. Do not use oxyride batteries or any

other nickel based batteries.

Music stand

1. Open the battery cover on the bottom of the

Digital Keyboard.

Power Supply

Either an AC adaptor or batteries can be used to power this

Digital Keyboard. Normally, use of AC adaptor power is

recommended.

• The AC adaptor does not come with this Digital Keyboard.

Purchase it separately from your retailer. See page E-3 for

information about options.

2. Load six D-size batteries into the battery

compartment.

Make sure the positive + and negative - ends of the

batteries are facing as shown in the illustration.

Using the AC Adaptor

Use the AC adaptor when you want to power the Digital

Keyboard from a household electrical outlet.

Specified AC Adaptor: AD-5 (CTK-4000)

AD-12 (CTK-5000)

3. Insert the tabs of the battery cover into the

holes on the side of the battery compartment,

and close the cover.

AC adaptor

Tabs

DC 9V terminal (CTK-4000)

DC 12V terminal (CTK-5000)

Household power outlet

■ Low Battery Indication

The indicator shown below starts to flash to let you know

when battery power is low. Replace the batteries with new

ones.

• Be sure to turn off Digital Keyboard power before

connecting or disconnecting the AC adaptor.

Low battery indicator

(flashes)

E-8

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the Digital Keyboard

2 1

Turning on Power and Playing

Using Headphones

Using headphones cuts off output from the built-in speakers,

which means you can practice playing even late at night

without disturbing others.

1. Press

This turns on power.

• Be sure to turn down the volume level before connecting

headphones.

2. Try playing something on the keyboard. Use

to adjust volume.

PHONES/OUTPUT jack (CTK-4000)

PHONES jack (CTK-5000)

Decrease

Increase

• Headphones do not come with the Digital Keyboard.

• Use commercially available headphones. See page E-3 for

information about options.

• Turning off the Digital Keyboard causes most current

settings to be cleared. The Digital Keyboard will revert

to initial settings the next time you turn it on.

• This is true for all settings except for sample sound

protection. Once you turn it on it remains on until you

turn it off again.

• Do not listen to very high volume output over

headphones for long period. Doing so creates the risk

of hearing damage.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor plugged

in when removing the headphones.

Auto Power Off (Using Batteries)

While you are using batteries for power, power will turn off

automatically if you do not perform any operation for about six

minutes. Auto Power Off is disabled while the AC adaptor is

being used for power.

■ Disabling Auto Power Off

You can disable Auto Power Off to ensure that power is not

turned off automatically during a concert, etc.

1. While holding down , turn on power.

Auto Power Off will be disabled.

E-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the Digital Keyboard

Changing Touch Response Sensitivity

Changing Keyboard Response to

Touch Pressure

(Touch Response)

Use the procedure below to control how much the volume of

played notes change in accordance with playing speed.

Select the setting that best matches your playing style.

Touch Response alters tone volume in accordance with

keyboard pressure (speed). This provides you some of the

same expressivity you get on an acoustic piano.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “Touch” (page

E-6).

Keyboard Instrument Sound Intensity

■ Sound intensity depends on the speed that keys

are pressed.

People normally believe that the stronger the pressure applied

to a piano keyboard, the louder the sound. Actually, however,

the intensity of the notes played depends on the speed at

which keys are pressed. Notes are louder when keys are

pressed quickly, and quieter when keys are pressed slowly.

Keeping this in mind as you play a keyboard musical

instrument lets you control note volume without striving to

apply too much pressure with your fingertips.

T o u c h

2. Use

(10-key) [–] and [+] keys to select one of

the three Touch Response sensitivity settings.

Off (oFF)

Touch Response is turned off. Sound

volume is fixed, regardless of key press

speed.

■ The playability of an acoustic piano

Type 1 (1)

Type 2 (2)

Normal Touch Response

Your Digital Keyboard provides you with key touch that is the

next best thing to an acoustic piano. Note volume changes

automatically in accordance with key press speed.

More sensitive Touch Response than Type 1

Indicator disappears when

Touch Response is turned off.

Pressing fast produces

louder notes.

Adjusting Display Contrast

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “OTHER” (page

Pressing slowly produces

softer notes.

E-6).

Do not try to use too much

pressure.

O T H E R

Flashes

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “Contrast”.

) and [6] (

) keys

C o n t r a s t

4. Use the

(10-key) [–] and [+] keys to adjust the

contrast.

• The contrast setting range is 01 to 17.

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the Digital Keyboard

Changing the Metronome Tempo

Using the Metronome

The metronome lets you play and practice along with a steady

Use the following procedure to change the tempo of the

metronome.

beat to help keep you on tempo.

1. Press

Start/Stop

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

1. Press

This starts the metronome.

• Pressing t and y at the same time will initialize the

tempo setting in accordance with the currently selected

song or rhythm.

This pattern changes with each beat.

• Pressing

causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

(10-key) to change it.

Note that you must input leading zeros, so 89 is input

as 089.

• The tempo value will stop flashing if you do not perform

any operation for a short while.

2. Press

again to stop the metronome.

Changing the Beats Per Measure

Tempo value (flashes)

You can configure the metronome to use a bell sound for the

first beat of each measure of the song you are playing.

• You can specify 0, or a value from 2 to 6 as the number of

beat per measure.

• When playing a built-in song, the beats per measure setting

(which determines when the bell sounds) is configured

automatically for the currently selected song.

Changing the Metronome Sound Volume

The metronome volume setting is changed automatically with

the volume level of the currently selected Auto

Accompaniment or song. The metronome volume cannot be

adjusted independently.

• For information about changing the Auto Accompaniment

volume, see page E-40.

1. Hold down

until the beats per measure

setting screen appears on the display.

• For information about changing the song volume, see page

E-28.

B e a t

• You cannot adjust the balance between the metronome

and note volume during Auto Accompaniment and built-in

tune play.

• If you do not perform any operation for a few seconds

after the beats per measure setting screen appears, the

display will return to the screen displayed before you

pressed

2. Use

(10-key) to enter the number of beats

per measure.

• The bell will not sound if you specify 0 for this setting. In

this case, all beats are indicated by a click sound. This

setting lets you practice with a steady beat, without

worrying how many beats there are in each measure.

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the Keyboard Sounds

bpbo

cocp

3. Try playing something on the keyboard.

Select from a variety of musical

instrument sounds

The tone of the instrument you selected will sound.

Your Digital Keyboard lets you select tones for a wide variety

of musical instrument sounds, including violin, flute, orchestra,

and more. Even the same song sound takes on a different feel

by changing the instrument type.

To select an instrument for playing

1. Press

Playing with a Piano Tone (Piano Setup)

Tone number

1. Press

and

at the same time.

This selects the grand piano tone.

Settings

Tone Number

Reverb

Transpose

: “001”

: “06”

: 00

S t . G r P n o

Tone name

Touch Response

: Off:Returns to initial default

2. Use

(10-key) to select the tone number you

want.

On:No change

: SUS

: “161” (CTK-4000), “181” (CTK-5000)

: Rhythm part only

: On

: Off

Pedal Effect

Rhythm Number

Accompaniment

Local Control

Drum Assign

Split

The corresponding tone number and tone name will

appear on the screen.

• See the separate “Appendix” for a complete list of available

tones.

• Use the number buttons to enter the tone number. Specify

three digits for the tone number.

Layer

Chorus

Octave Shift (Upper): 0

Example: To select 001, enter 0 3 0 3 1.

• When one of the drum sets is selected, each keyboard key

is assigned a different percussion sound.

Auto Harmonize

Arppegiator

Scale

: Off

: Equal

E-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the Keyboard Sounds

Layering Two Tones

You can use the following procedure to layer two different

tones (such as piano and strings) so they sound

simultaneously when you press a keyboard key.

Splitting the Keyboard between

Two Different Tones

You can use the procedure below to assign different tones to

the right range and left range of the keyboard, so it sounds

like you are playing an ensemble between two instruments.

1. Select the first tone you want to use.

Press

want.

and then use

(10-key) to select the tone you

To select the two tones for a split keyboard

Example: 026 ELEC.PIANO 1 (CTK-5000)

1. Select the tone for the right side range (page

E-12).

Press

want.

and then use

(10-key) to select the tone you

Example: 335 FLUTE 1 (CTK-5000)

E . P i a n o 1

2. Press

F l u t e 1

2. Press

Lights

3. Use

(10-key) to select the second tone you

want.

Example: 212 STRINGS (CTK-5000)

Lights

3. Use

(10-key) to select the left side range tone

you want.

Example: 056 VIBRAPHONE 1 (CTK-5000)

S t r i n s

4. Play something on the keyboard.

Both tones sound at the same time.

V i b e s 1

This will sound the tones assigned to the left and right

side ranges of the keyboard.

5. Pressing

again to unlayer the keyboard (so it

plays only the tone you selected in step 1).

4. Play something on the keyboard.

• Each press of

and unlayered (one tone).

toggles between layered (two tones)

VIBRAPHONE 1

Split point

FLUTE 1

Disappears

E-13

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the Keyboard Sounds

5. Pressing

again to unsplit the keyboard (so it

plays only the tone you selected in step 1).

Using Reverb

• Each press of

toggles between split (two tones) and

Reverb adds reverberation to notes. You can change the

unsplit (one tone).

duration of the reverb.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “Reverb” (page

E-6).

Disappears

R e v e r b

• If you turn on both layer and split, layering will be applied to

the right side range of the keyboard only.

2. Use the

(10-key) [–] and [+] keys to select the

reverb setting you want.

To change the split point

Off (oFF)

1 to 10

Turns off reverb.

1. While holding down , press the keyboard key

The larger the number selected, the longer

the reverb duration.

where you want the split point to be.

The key you press will become the lowest note of the right

side range of the split keyboard.

Example: Setting middle C (C4) as the split point.

Indicator disappears when reverb is turned off.

R e v e r b

Using Chorus

C 4

Key name

Chorus is a function that adds depth and breadth to notes. It

makes you sound as if you are playing multiple instruments.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “Chorus” (page

E-6).

C h o r u s

2. Use the

(10-key) [–] and [+] keys to select the

chorus type you want.

There are five chorus types, plus an off setting.

Indicator disappears when chorus is turned off.

C h o r u s

• The actual effect produced by chorus depends on the tone

you are using.

E-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the Keyboard Sounds

Using a Pedal

A pedal can be used to change notes in various ways while

Changing the Pitch

(Transpose, Tuning, Octave Shift)

playing.

• A pedal unit does not come with the Digital Keyboard.

Purchase one separately from your retailer. See page E-3

for information about options.

Changing the Pitch in Semitone Steps

(Transpose)

The transpose feature lets you change the pitch, in semitone

steps. A simple operation lets you instantly change the pitch

to match that of a singer.

Connecting a Pedal Unit

Connect an optional pedal unit.

• The transpose setting range is –12 to +12 semitones.

1. Press

SUSTAIN/ASSIGNABLE JACK

T r a n s .

Selecting the Pedal Effect

2. Use the

(10-key) [–] and [+] keys to select the

1. Press

and then use the

(10-key) [4] (

)

transpose setting you want.

and [6] (

) keys to display “OTHER” (page

Fine Tuning (Tuning)

E-6).

Use the tuning feature when you need to adjust the pitch

slightly to play along with another musical instrument. Also,

some artists perform their music with slightly altered tuning.

You can use the tuning feature to adjust tuning so it exactly

matches a performance on a CD.

O T H E R

• The tuning setting range is –99 to +99 cents.

Flashes

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “Tune”.

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “Jack”.

) and [6] (

) keys

T u n e

2. Use the

(10-key) [–] and [+] keys to adjust the

tuning.

J a c k

4. Use the

(10-key) [–] and [+] keys to select the

pedal effect you want.

• The following shows the available pedal effects.

Sustain

(SUS)

Sustains notes played while the pedal is

depressed. Organ and other similar tone

notes are sustained even if the pedal is not

pressed.

Sostenuto

(SoS)

Sustains notes that are playing when the

pedal is depressed before the keyboard keys

are released.

Soft

(SFt)

Slightly softens notes played while the pedal

is depressed.

Rhythm

(rHy)

Pressing the pedal starts and stops Auto

Accompaniment or song playback.

E-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the Keyboard Sounds

Octave Shift

Using the Pitch Bend Wheel to

Shift the Pitch of Notes

(CTK-5000 Only)

You can use the pitch bend wheel to slide the pitch of notes

smoothly upwards and downwards. This technique makes it

possible to produce effects that are similar to sounds

produced when bending notes on a saxophone or electric

guitar.

Octave Shift lets you raise or lower the pitch of the keyboard

notes in octave units.

• The octave shift setting range is –2 to +2 octaves.

• When using Split (page E-13), you can individually set the

left and right keyboard ranges to the pitches you want.

1. Keep pressing

until the screen shown below

appears on the display.

If you want to use Split, turn on Split before pressing

• If you do not perform any operation for a few seconds

after this screen appears, the display will return to the

previous screen automatically.

To play with the pitch bend wheel

1. While playing a note on the

keyboard, rotate the pitch bend

wheel on the left of the keyboard

upwards or downwards.

The amount the note bends depends on how

much you rotate the pitch bend wheel.

• Do not have the pitch bend wheel rotated

as you turn on the Digital Keyboard.

p p

O c t U

e r

2. Use the

(10-key) [–] and [+] keys to shift the

octave.

Specifying the Pitch Bend Range

• Split On : This step affects the right side keyboard

range only.

Use the following procedure to specify how much the pitch of

the note changes whenever the pitch bend wheel is rotated

upwards or downwards. You can specify a range from 0 to 12

semitones (one octave).

• Split Off : This step affects the entire keyboard range.

3. Press

• Split On : The screen shown below will appear. Use the

(10-key) [–] and [+] keys to shift the

1. Press

and then use the

(10-key) [4] (

)

and [6] (

octave for the left side keyboard range.

• Split Off : The screen shown below will appear.

Advance to step 4.

) keys to display “OTHER” (page

E-6).

O T H E R

O c t L o w e r

Flashes

4. Press

again.

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “Bend Rng”.

) and [6] (

) keys

B e n d R n

4. Use the

(10-key) [–] and [+] keys to change

the range.

E-16

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital

Keyboard

bpbo

bsbtckclcmcn

cr cs

You can use the Digital Keyboard to sample a sound from a

portable audio player, or other device, and then play the

sound with keyboard keys. For example, you could sample

the bark of your dog and then use the sound in a melody. You

also can sample and use passages from a CD. The sampling

feature is a great way to create new sounds that are highly

creative.

2. Turn down the volume levels of the external

device and the Digital Keyboard.

3. Turn on the external device and then the Digital

Keyboard.

• Sampled sounds are recorded in monaural.

Connection and Preparation

• Turn off the external device and the Digital Keyboard

before connecting them.

1. Connect an external device to the Digital

Keyboard.

Stereo mini plug

CD player, Cassette player,

etc.

Digital Keyboard AUDIO IN jack

• Connection requires commercially available connecting

cords, supplied by you. Connecting cords should have a

stereo mini plug on one end and a plug that matches the

configuration of the external device on the other end.

E-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

4. After the sound you want to sample is finished,

press

Sampling and Playing a Melody

Sound (Melody Sampling)

Use the procedures in this section to sample a sound and play

it as the melody part on the Digital Keyboard.

• Up to five sampled sounds can be stored in Digital

Keyboard memory as tone numbers 671 through 675 (CTK-

4000: 571 through 575). Simply select the tone number

where the sound you want is located to assign the sound to

the keyboard.

Sampling will stop when you release

• Even if you do not press , sampling will stop

automatically whenever there is no more sound being

input from the external device. Sampling also will stop

automatically 10 seconds after it is started.

Sampled sound 1

To sample a sound

S 1 : O r

n l

1. Press

and then use

(10-key) to enter the

Used memory (Unit: Kbytes)

tone number (CTK-5000: 671 to 675) (CTK-4000:

571 to 575) where you want to store the

sampled sound.

Remaining memory capacity

5. Play something on the Digital Keyboard.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-23 for more information.

N o D a t a

No sampled sound stored

Lights

• In place of the above steps, you could press

the same time and then select a tone number.

and

2. Press

• Sampling sound and storing it will delete any sound

data currently stored under the same tone number. To

help ensure that you do not accidentally delete

important data, be sure to read “Protecting Against

Accidental Deletion of Sampled Sounds” on page E-24.

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

a i t i n

Flashes

3. Output the sound from the external device.

Sampling will start automatically.

S a

l i n

Lights

E-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

Changing the Volume of Sampled Sound

■ How sampled sounds are played

Pressing Middle C (C4) will play back the original sound. The

keys to the left and right of C4 play the sound at different

pitches.

Looped Playback

You can use the following procedure to change the volume

level of the looped playback of each sampled sound, if you

want.

1. Press the button of the sampled sound whose

volume you want to change ( to ).

bs cm

• This will cause the sounds loop to sound.

2. While the loop is sounding hold down the same

Looping a Sampled Sound

sampled sound button ( to ) as you press

bs cm

You can use the following procedure to loop a sampled sound

so it continues to repeat, as you play on the Digital Keyboard.

any keyboard key.

• Pressing the keyboard key quickly will increase sample

sound volume, while pressing slowly will decrease

volume.

1. Press

2. While holding down , press

3. After the sampled sound is at the volume level

This enters repeat standby.

you want, release its button ( to ).

bs cm

Lights

3. Press the button ( to ) that corresponds to

bs cm

the melody sampling tone number you want to

select.

This will start looped playback of the selected sound.

To select this tone number:

Press this button:

CTK-5000

CTK-4000

671

571

672

673

674

675

572

573

574

575

4. Press the same button again to stop playback.

to return to the screen that was

5. Press

displayed before step 2 of this procedure.

E-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

Applying Effects to a Sampled Sound

Incorporating a Sampled Sound

into a Drum Set (Drum Sampling)

You can use the procedure to change the drum sounds that

are assigned to each keyboard key.

You can apply various effects to sampled sounds.

1. Press

and then use

(10-key) to enter the

tone number (CTK-5000: 671 to 675) (CTK-4000:

• You can store up to three drum sets and store them as tone

numbers 676, 677, and 678 (CTK-4000: 576, 577, and

578). Simply select the tone number where the drum set

you want is located to assign the drum set sounds to the

keyboard.

571 to 575) to which you want to apply effects.

2. Press

to cycle thorough the available

effects, described below.

Effect Type

(Display)

1. Press

Description

lights.

Normal sampled tone (no looping, no

effect).

Original (Orgnl)

2. Press

and then use

(10-key) to enter the

tone number (CTK-5000: 676, 677, or 678)

(CTK-4000: 576, 577, or 578) for the drum set

whose sounds you want to change.

Loop 1 (Loop1) Loops the sampled sound.

Loops the sample sound and raises the

Loop 2 (Loop2) pitch of the resonating sound when the

keyboard key is released.

Loops the sample sound and lowers the

Loop 3 (Loop3) pitch of the resonating sound when the

keyboard key is released.

N o D a t a

Changes the pitch from low to high, at an

Pitch 1 (Ptch1)

increasing rate.

Lights

• In place of the above steps, you could press

at the same times and then select a tone number.

and

Changes the pitch from high to low, at a

Pitch 2 (Ptch2)

decreasing rate.

Changes the pitch from high to low, at a

decreasing rate, and then raises the pitch

when the key is released.

3. Press

Pitch 3 (Ptch3)

Tremolo (Treml) Alternates volume between high and low.

Adds vibrato and changes the pitch by a

Funny 1 (Funy1)

N o D a t a

gradually increasing amount.

Alternates between high pitch and low

Flashes

Funny 2 (Funy2)

pitch.

Adds vibrato and changes the pitch from

4. Press the keyboard key to which you want to

assign the drum sound you are about to

sample.

Funny 3 (Funy3)

low to high.

• Avoid assigning the same sampled sound to the keyboard

for play along and for looped play. Doing so will cause, the

Loop 1 effect to be applied to the keyboard tone while

looped play of the sampled sound is being performed.

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

a i t i n

Flashes

E-20

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

5. Output the sound from the external device.

Editing Sampled Drum Set Sounds

Sampling will start automatically.

You can use the procedures in this section to copy the drum

sound assigned to one keyboard key to another key, to

change the pitch of a sound, and to delete a sampled sound.

1. Press

and then use

(10-key) to enter the

S a

l i n

tone number (CTK-5000: 676, 677, or 678) (CTK-

4000: 576, 577, or 578) for the drum set you

want.

Lights

6. After the sound you want to sample is finished,

press

2. Press

3. Press

l D r

Remaining memory capacity

l D r

Sampling will stop when you release

Flashes at high speed

• Even if you do not press , sampling will stop

automatically whenever there is no more sound being

input from the external device. Sampling also will stop

automatically 10 seconds after it is started.

This is the editing mode.

• While in the editing mode, you can copy a sound,

change the pitch of a sound, or delete a sound (each of

which is described below). Pressing

again exits the

7. Press the keyboard key.

editing mode and returns to step 2 of this procedure.

Indicates keyboard keys that have sounds assigned.

• You can repeat steps 3 through 6 to change other sounds

that make up the currently selected drum set. There are

eight sounds per drum set.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-23 for more information.

■ To copy a sampled sound from one key to

another

While holding down the keyboard key to which the sampled

sound you want to copy is assigned, press the keyboard key

to which you want to copy it.

Example: To copy sampled sound of key C4 to key D4

• Sampling a sound will delete any sound data currently

assigned to the same keyboard key. To help ensure

that you do not accidentally delete important data, be

sure to read “Protecting Against Accidental Deletion of

Sampled Sounds” on page E-24.

Indicates the keyboard key whose sound was copied.

• A keyboard key that already has a sampled sound assigned

cannot be selected as a copy destination.

E-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

■ To change the pitch of a sampled sound

While holding down the keyboard key of the sampled sound

Other Sampling Functions

whose pitch you want to change, use the

[+] keys to change the pitch.

(10-key) [–] and

Changing to a Manual Sampling Start

• You can change the pitch within a range of –64 to 63

semitones.

Normally when the Digital Keyboard is in sampling standby, it

will start sampling automatically whenever it detects sound

input. You can use the following procedure to enable manual

sampling start, which will cause sampling to wait until you

press a button to start it. You can use this to insert silence

before the sampled sound.

■ To delete a keyboard key’s sampled sound

While holding down the keyboard key whose sound you want

to delete, press . In response to the “DelSure?” message

that appears, press the

(10-key) [+] button to delete, or [–]

to cancel the delete operation.

1. Press

and then use the

) keys to display “SAMPLING” (page

(10-key) [4] (

)

• Deleting a sampled sound will return the key to its initial

default built-in sound.

Example: To delete the sound assigned to key D4

and [6] (

E-6).

Disappears

S A

P L I N G

Using a Drum Sampling Tone in Auto

Accompaniment (Drum Assign)

Flashes

Use the following procedure to change the rhythm part of an

Auto Accompaniment pattern to a drum set sound that you

sampled.

2. Press the

(10-key) [7] (ENTER) key.

1. Press

and then use

rhythm number of the Auto Accompaniment

(10-key) to enter the

pattern you want.

You cannot use a Drum Sampling Tone in a user rhythm,

so do not select a user rhythm in the above step.

A u t o S t r t

automatic sampling start.

This enables manual sampling start, which operates as

described below.

3. Press the

(10-key) [–] key to turn off

2. Press

and then use

tone number of the sampling drum set that

(10-key) to enter the

contains the sound you want to use.

• Melody sampling (page E-18):

3. Press

Sampling starts when you release , which you press

in step 2 of the sampling procedure.

• Drum sampling (page E-20):

Sampling starts when you release the Digital Keyboard

key you press in step 4 of the sampling procedure.

This changes the rhythm part of the Auto Accompaniment

pattern you selected in step 1 to the sampled sound you

selected in step 2.

• To change the Auto Accompaniment rhythm part back

to its original sound, press

again.

• When manual sampling start is enabled, sampling

• Some rhythm part drum sounds cannot be replaced by

sampled sounds.

starts when you release

or the keyboard key, not

when you press it. Sampling does not start if you hold

down the button or key.

E-22

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

Deleting a Sampled Sound

Changing to Manual Sampling Stop

Normally the Digital Keyboard will stop sampling automatically

whenever it detects there is no sound input. You can use the

following procedure to enable manual sampling stop, which

will cause sampling to continue until you press a button to

stop it. You can use this to insert silence after the sampled

sound.

You can use the following procedure to specify a sampled

tone number and delete its data.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “DELETE” (page

E-6).

1. Press

and then use the

) keys to display “SAMPLING” (page

(10-key) [4] (

)

and [6] (

E-6).

2. Press the

3. Press the

(10-key) [7] (ENTER) key.

D E L E T E

(10-key) [6] (

) key.

Flashes

2. Press the

(10-key) [7] (ENTER) key.

A u t o S t o

S 1 : O r

n l

4. Press the

(10-key) [–] key to turn off

Used memory (Unit: Kbytes)

automatic sampling stop.

Remaining memory capacity

Even when there is no sound input from an external

device, sampling will continue until you press and release

or a keyboard key.

3. Use the

(10-key) [–] and [+] keys to select the

tone number of the data you want to delete.

4. Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

• When manual sampling stop is enabled, sampling

stops when you release or the keyboard key, not

when you press it. Sampling does not stop if you hold

down the button or key.

S u r e ?

5. Press the

(10-key) [+] (YES) key to delete the

data, or [–] (NO) or [9] (EXIT) to cancel the

delete operation.

• After the delete procedure is complete, “Complete” will

appear on the display followed by the screen in step 2

of the above procedure.

• For information about deleting individual drum sounds

in a drum sampling set, see “Editing Sampled Drum Set

Sounds” on page E-21.

E-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Sampling Sounds and Playing Them on the Digital Keyboard

Protecting Against Accidental Deletion of

Sampled Sounds

You can use the following procedure to protect each sampled

sound against accidental deletion.

1. Press

and then use

tone number of the sampled tone you want to

(10-key) to enter the

protect.

2. Press

and then use the

) keys to display “SAMPLING” (page

(10-key) [4] (

)

and [6] (

E-6).

3. Press the

(10-key) [7] (ENTER) key.

4. Use the

(10-key) [4] (

to display “Protect”.

) and [6] (

) keys

P r o t e c t

5. Press the

(10-key) [+] key to turn on

protection.

Once protected a tone cannot be deleted.

A protected tone is indicated as shown below.

1 : O r

n l

Protected

■ Saving Sample Data on an External Device

• SD memory card (CTK-5000 only) (page E-61)

• Computer (page E-68)

■ Maintaining Sampled Sound Data in Memory

After you save sampled sound data in memory, it will remain

there as long as power is supplied to the keyboard. However,

if you disconnect the AC adaptor when there are no batteries

loaded, sampled sound data will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

E-24

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Built-in Songs

7 8 9 bkbl bm bn

With this Digital Keyboard, built-in tune data is referred to as

“songs”. You can listen to the built-in songs for your own

enjoyment, or you can play along with them for practice.

2. To change to another song while demo

playback is in progress, use (10-key) [–] and

[+] keys to enter the song number you want

(page E-6).

This will cause demo playback to jump to the song whose

number you entered.

• In addition to simple listening enjoyment, the built-in songs

can be used with the lesson system (page E-29) for

practice.

• You can increase the number of tunes using your SD

memory cards (CTK-5000 only) (page E-62) or computer

(page E-65).

• You cannot use

song.

(10-key) number buttons to select a

3. To stop demo playback, press

Demo playback continues until you stop it by pressing

Playing the Demo Songs

Use the following procedure to play back built-in songs.

1. Press

and

at the same time.

This will start playback of the demo songs.

• See page E-75 for information about song numbers and

the song sequence.

• Demo playback always starts from song number 151.

Flashes

Song number

D e

o T u n e

Tune name

E-25

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Built-in Songs

Pause, Skip Forward, Skip Back

Playing Back a Particular Song

Use the procedure below to play back one of the built-in

songs. You can play along on the keyboard with song

playback.

Use the operations in this section to perform pause, skip

forward, and skip back operations.

■ Pause

Start/Stop

1. Press

This pauses song playback.

1. Press

2. Press

again to resume playback from the

Song number

point where you paused it.

■ Skip Forward

1. Press

This skips song playback forward to the next measure.

Each press of skips ahead one measure. Holding

T w i n k l e

down

skips forward at high speed until you release it.

Tune name

• Pressing

while song playback is stopped performs

lesson function phrase skip forward (page E-30).

2. Use

(10-key) to enter the number of the song

you want.

• See page E-75 for a complete list of available songs.

3. Press

This starts playback of the song.

Measure number

Tempo

Note

Beat

Sustain pedal

Measure

■ Skip Back

1. Press

This skips song playback back to the previous measure.

Each press of skips back one measure. Holding down

skips back at high speed until you release it.

• Pressing

while song playback is stopped performs

lesson function phrase skip back (page E-30).

Key

Fingering

4. Press

again to stop playback.

Song playback will continue (repeat) until you press

stop it. You can cancel song repeat by pressing

(“REPEAT” indicator disappears from the display).

E-26

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Built-in Songs

4. Pressing

again returns to normal playback.

Changing the song number clears the start measure and

end measure of the repeat operation.

Repeating Playback of Specific Measures

You can use the procedure in this section to repeat particular

measures for practice playing along until you master it. You

can specify the start measure and the end measure of the

section you want to play and practice.

Start

End

These measures are repeated.

Changing Playback Speed (Tempo)

1. Press

to temporarily turn off song repeat

(“REPEAT” disappears from the display).

You can use the following procedure to change the speed

(tempo) in order to slow down playback to practice difficult

passages, etc.

2. When song playback reaches the measure you

1. Press

want to specify as the start measure, press

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

This specifies the measure as the start measure.

• Pressing y and t at the same time will return the

current song to its original default tempo.

• Pressing

causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

(10-key) to change it. The tempo value will stop

flashing if you do not perform any operation for a short

while.

Flashes

• Changing the song number will return the song to its

original default tempo.

3. When playback reaches the measure you want

to select as the end measure, press again.

This specifies the measure as the end measure and starts

repeat playback of the measures in the specified range.

• During repeat play you can use

to pause playback,

to skip forward, or

to skip back.

Lights

E-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Built-in Songs

Adjusting the Song Volume

Turning Off the Part of One Hand for Practice

(Part Select)

Use the following procedure to adjust the balance between

the volume of what you play on the keyboard and song

playback volume.

You can turn off the right hand part or the left hand part of a

song during playback and practice playing along with the

remaining part.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “Song Vol” (page

1. Press

to select the part you want to turn off.

Each press of

below.

cycles through the settings shown

E-6).

Right hand part off

S o n

V o l

2. Use the

(10-key) [–] and [+] keys to adjust the

Left hand part off

song volume.

Playing with the Tone as Song Playback

Both hand parts off

The procedure below lets you select the same keyboard tone

as the one being used in the song and play along with your

favorite tunes.

1. After selecting a song, hold down

for about

Both hand parts on

two seconds until the displayed tone name

changes to the tone name of the song.

• If your currently selected tone is the same as the song

tone, the display contents will not change.

2. Press

This starts playback in accordance with the setting you

selected in step 1.

2. Play along with song playback.

• During playback with one part turned off, only the notes of

the part that is turned off are shown on the display.

• If you select a song that uses different tones for left and

right hand play, the right hand part tone is assigned to the

keyboard.

Increasing the Selection of Songs

You can load song data from an external device and increase

the selection of songs available on the keyboard. See the

following pages for more information.

• SD memory card (CTK-5000 only) (page E-62)

• Computer (page E-68)

• For information about how to delete song data loaded from

an external device, see page E-57.

E-28

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

7 8 9 bl bm

bsbtckclcm

To master a song, it is best to break it up into shorter parts

(phrases), master the phrases, and then put everything

together. Your Digital Keyboard comes with a Step Up Lesson

feature that helps you to do just that.

Step Up Lesson Flow

Step Up Lesson takes you through practice of the right hand

part, left hand part, and both hand parts for each phrase of a

song. Master all of the phrases and you master the song.

Phrases

Phrase 1

• Right Hand Lesson 1, 2, 3

• Left Hand Lesson 1, 2, 3

• Both Hand Lesson 1, 2, 3

The built-in songs are pre-divided into phrases to help you

master keyboard play.

Song start

Song end

Final

Phrase

Repeat the above to practice phrase

2, 3, 4, and so on, until you reach the

final phrase of the song.

Phrase 1

Phrase 2

Phrase 3

. . . .

After mastering all of the phrases,

practice the entire song.

Now you have mastered the entire

song!

E-29

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

Messages that Appear during Lessons

2. Press

(or ) to move forward one phrase, or

to move back one phrase.

The following are the messages that appear on the display

during Step Lessons.

• Holding down

speed.

scrolls through phrases at high

• The Digital Keyboard remembers the last phrase you

practiced for up to 20 songs. To recall the last practice

phrase for the current song (if it is available), hold down

Message

Description

Appears when you select a phrase, when a

lesson starts, etc.

• Note that certain phrases will cause “Wait”

to appear instead of “Phrase”.

Phrase number

<Wait>

Appears when the lesson starts with an intro

or fill-in phrase that is not included in the

phrases to be practiced. Play toll advance

automatically to the next phrase after the un-

included phrase plays, so wait until then to

start playing on the keyboard.

< P h r a s e >

First measure of the selected phrase

NextPhrs

Appears when advancing automatically to the

next phrase. This message appears following

a phrase for which “Wait” (see above) is

displayed, and during an Auto Step Up Lesson

(page E-34).

3. Press

to select the part you want to practice.

Each press of

below.

cycles through the settings shown

From top

Complete

This message appears during Auto Step Up

Lesson (page E-34) immediately before

practice from Phrase 1 up until the phrase

currently being practiced.

Right hand practice

Appears at the end of Auto Step Up Lesson

(page E-34).

Left hand practice

Both hand practice

Selecting the Song, Phrase, and

Part You Want to Practice

First, select the song, phrase, and part you want to practice.

1. Select the song you want to practice (page

E-26).

This will select the first phrase of the song.

* This indicator (setting) is skipped if you press

while

a lesson is in progress.

4. Hold down

for about two seconds.

The same tone used for song playback will be assigned to

the keyboard (page E-28).

E-30

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

2. Play notes on the keyboard in accordance with

the instructions provided on the display and by

voice fingering guide.

Lessons 1, 2, and 3

Now it is time to start the lessons. First, select the song and

part you want to practice.

During this lesson, the display shows the key you need to

press next. Voice fingering guide uses a simulate voice to

announce which finger you should use.

Lesson 1: Listen to the song.

First, listen to the example a few times to familiarize yourself

with what it sounds like.

1. Press

Flashes

Lights

This starts example play.

Lights

Master playing the correct note with the correct finger

as instructed by the guidance. Practice playing with the

correct timing.

Lights

2. To stop Lesson 1, press

bs bl

Song playback will wait for you to play the correct note.

• Keyboard key goes from flashing to lit.

• Note guide sounds the correct note to be played.

• Voice Fingering Guide tells you what finger to use.

Lesson 2: Watch how the song is played.

Play the song on the keyboard. During this lesson, the display

shows the key you need to press next. Voice fingering guide

also uses a simulate voice to announce which finger you

should use. Follow the instructions to press the correct

keyboard keys and play the notes. Don’t worry if you play the

wrong note. Song playback will wait until you play the correct

note. Take your time and play at your own pace.

Pressing the correct keyboard key causes song

playback to resume and the key for the next note

flashes.

1. Press

This starts Lesson 2.

3. To stop Lesson 2, press

bt bl

Lights

● If you complete Lesson 2 play to the end, a score that

rates your play appears on the screen.

Bravo!

Again!

You pass! Advance to the next lesson.

Go back and try again.

Lights

E-31

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

Lesson 3: Remember what you learned as

you play.

Playing a Particular Song All the Way

Through

Though song playback stands by waiting for you to press the

correct keys as in Lesson 2, the Digital Keyboard does not

provide any guidance about what note you need to play next.

Remember everything you have learned up to Lesson 2 as

you play.

After you successfully complete all of the phrases in Lessons

1, 2, and 3, it is time to try playing the entire song from

beginning to end.

1. Use

to turn off both hand parts and then

press

1. Press

Try playing with both hands and find out how the Digital

Keyboard evaluates your effort.

This starts Lesson 3.

Lights

Lesson Settings

Playing without Phrase Repeat

You can turn off phrase repeat for Lessons 1, 2, and 3.

1. Press

This disables phrase repeat play.

Lights

2. Play the song along with the song playback.

Press the keyboard keys you learned in Lesson 2.

Disappears

Song playback will wait for you to play the correct note.

• Note guide sounds the correct note to be played.

Turning Off Voice Fingering Guide

Use the following procedure to turn off voice fingering guide,

which tells you which finger to use to play each note in

Lesson 2 and Lesson 3.

If you are still unable to press the correct keyboard

key, the Digital Keyboard will display keyboard

guidance and voice fingering guide will tell you what

finger to use, just as in Lesson 2.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “LESSON” (page

E-6).

Pressing the correct key will cause song playback to

resume.

3. To stop Lesson 3, press

ck bl

• If you complete Lesson 3 play to the end, a score that

rates your play appears on the screen the same as with

Lesson 2.

L E S S O N

Flashes

2. Press

(10-key) [7] (ENTER) key.

S e a k

E-32

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

Changing the Phrase Length

3. Press the

(10-key) [–] key to select the OFF

setting.

You can use the following procedure to change the length of

lesson phrases, or to configure the lesson feature so the song

is played all the way through, without being divided into

phrases.

Indicator disappears

when voice fingering

guide is turned off.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “LESSON” (page

Turning Off Note Guide

E-6).

Use the following procedure to turn off note guide, which

sounds the note to be played next in Lesson 2 and Lesson 3.

2. Press

(10-key) [7] (ENTER) key.

1. Press

and then use the

(10-key) [4] (

)

3. Use the

(10-key) [4] (

to display “PhraseLn”.

) and [6] (

) keys

and [6] (

) keys to display “LESSON” (page

E-6).

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “NoteGuid”.

) and [6] (

) keys

P h r a s e L n

(10-key) [–] and [+] keys to select the

4. Use the

phrase length you want.

Off (oFF)

The phrase length is from the beginning

to the end of the song.

N o t e G u i d

Preset (PrE)

Phrase lengths are as specified in the

song.

4. Press the

(10-key) [–] key to select the OFF

setting.

The following options are available for songs loaded from

external sources only.

Turning Off Performance Evaluation

Short (Ln1)

Middle (Ln2)

Long (Ln3)

Length of one phrase is one measure.

Length of one phrase is two measures.

Length of one phrase is four measures.

Use the following procedure to turn off performance

evaluation, which evaluates your performance and displays a

score in Lesson 2 and Lesson 3.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “LESSON” (page

E-6).

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “Scoring”.

) and [6] (

) keys

S c o r i n

4. Press the

(10-key) [–] key to select the OFF

setting.

Indicator disappears

when performance

evaluation is turned off.

E-33

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Songs to Master Keyboard Play

■ Auto Step Up Lesson Procedure

Using Auto Step Up Lesson

With Auto Step Up Lesson, the Digital Keyboard advances

Phrase 1

Lesson 1

through each lesson automatically.

Lesson 2

1. Select the song and part you want to practice

(page E-26).

Lesson 3

2. Press

Listen to the first phrase in Lesson 1.

• In Lesson 1, the sample phrase is played only once

before advancing to Lesson 2.

Phrase 2

Lesson 1

Lesson 2

Flashes

Lights

Lesson 3

Phrase 1, 2

• Lesson 3*

3. Auto Step Up Lesson stops automatically after

you are able to get through all of the lessons

successfully.

Phrase 3

Lesson 1

• In Lesson 2 and Lesson 3, the Digital Keyboard

advances to the next lesson if you are able to achieve

the “Bravo!” evaluation result.

Lesson 2

• To cancel a lesson, press

cm bl

Lesson 3

Phrase 1, 2, 3

• Lesson 3*

• You can change the step and phrase during Auto Step Up

Lesson using , and to

bs cl

8 9

• Starting Auto Step Up Lesson automatically turns on

phrase repeat (page E-32) and play evaluation (page

E-33). These features cannot be turned off during lessons.

Next phrase practice using the same

procedure

Final phrase

Lesson 1

Lesson 2

Lesson 3

From Phrase 1 to the final phrase

• Lesson 3*

Lesson complete

* Auto Step Up Lesson advances to the next phrase,

regardless of whether the “Bravo!” result is attained.

E-34

Download from Www.Somanuals.com. All Manuals Search And Download.

Music Challenge Keyboard Game

bqbpbo

Music Challenge is a game that measures your reaction

speed as you press keys in response to on-screen keyboard

indicators and fingering guide indications.

4. The game ends when you advance successfully

through 20 notes.

• Your playing time appears on the display. After a short

while, the playing time display changes to a score. To

1. Press

2. Press

clear the score from the display, press

, or

bo bp bq

• You can cancel a game at any time by pressing

This causes a key on the on-screen keyboard to start to

flash, and starts the Music Challenge song.

Playing time

Number of remaining notes

T i

e 1 9 . 2

. C H A L . !

Score

Fingering

Displayed during a game.

S c o r e 8 0

3. After the on-screen keyboard indicator changes

from flashing to lit, press the indicated key with

the indicated finger as quickly as possible.

• Notes and fingering guide fingers are indicated randomly.

• The tempo of the game songs cannot be changed.

This causes the on-screen keyboard key to go out to let

you know that you cleared the first note. The next on-

screen keyboard key starts to flash, so get ready to press

the next key.

• All buttons except

is in progress.

1 bl

, and

are disabled while a game

• The time it takes you to press the keyboard key after

the on-screen key lights appears on the display (Unit:

0.1 sec). The shorter the time, the higher your score.

• Pressing a keyboard key before the on-screen key

goes from flashing to lit, will not advance to the next

note.

Time

0.3sec

. C H A L . !

E-35

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

7 8 9 bkbl bm bn

cq cs

With Auto Accompaniment, simply select an accompaniment

Starting and Stopping the Rhythm Part Only

1. Press

pattern. Each time you play a chord with your left hand the

appropriate accompaniment will play automatically. It’s like

having a personal backup group along with you wherever you

go.

Rhythm number

• Auto Accompaniments are made up of the following three

parts.

(1) Rhythm

(2) Bass

(3) Harmony

F u n k 8 B t

Rhythm pattern name

You can have only the rhythm part play, or you can have all

three parts play at the same time.

2. Use

(10-key) to select the rhythm number

you want.

• See the separate “Appendix” for information about

individual rhythms.

Playing the Rhythm Part Only

The rhythm part is the foundation each Auto Accompaniment.

Your Digital Keyboard comes with a variety of built-in rhythms,

including 8-beat and waltz. Use the following procedure to

play the basic rhythm part.

3. Press

This starts the rhythm.

This pattern changes with each beat.

4. Play along with the rhythm.

5. To stop the rhythm, press

again.

E-36

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

again returns to rhythm only

5. Pressing

Playing All Parts

accompaniment.

Auto Accompaniment with Chords

• For information about starting Auto Accompaniment as

soon as a chord is played, see “Using Synchro Start” on

page E-40.

• You can use the split point to change the size of the

accompaniment keyboard range (page E-14).

Playing a chord with your left hand automatically adds bass

and harmony accompaniment parts to the currently selected

rhythm. It is just like having your own personal back up group

on call.

1. Start play of the Auto Accompaniment rhythm

Selecting a Chord Input Mode

part.

You can select from among the following five chord input

modes.

2. Press

This enables chord input on the accompaniment

keyboard.

• FINGERED 1

• FINGERED 2

• FINGERED 3

• CASIO CHORD

• FULL RANGE CHORD

Accompaniment keyboard

1. Hold down

until the chord input mode

selection screen appears on the display.

Chord input mode

Lights

C h o r d

chord input mode you want.

• For information about each chord input mode, see the

separate “Appendix”.

• If you do not perform any operation after the chord input

mode selection screen appears, the display will return

automatically to the screen that was displayed before

3. Use the accompaniment keyboard to play

2. Use the

(10-key) [–] and [+] keys to select the

chords.

This will cause bass and harmony Auto Accompaniment

parts to be added to the rhythm part.

Chords

(no melody played)

Melody

you held down

Example:Pressing D-F^#-A-C on the accompaniment keyboard

Accompaniment for the D-F^#-A-C chord (D7) sounds.

4. Play other chords with left hand as you play the

melody with your right hand.

E-37

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

CASIO CHORD Fingering

Chord Type

■ FINGERED 1, 2, and 3

With these three input modes, you finger 3-note or 4-note

chords on the accompaniment keyboard. Note that with some

chords, even if you do not finger the third or fifth note, they will

be played anyway.

Example

C (C Major)

Major Chords

Letters above the accompaniment

keyboard indicate the chord

C^#DE

F^#G A A B

C C^#DE F

assigned to each key. Pressing a

single accompaniment area key in

the CASIO CHORD mode will play

the major chord whose name is

marked above the key. All of the

accompaniment area keys that are

marked with the same chord name

play exactly the same chord.

Accompaniment keyboard

● FINGERED 1

Play the component notes of the chord on

the keyboard.

Minor Chords

Cm (C Minor)

To play a minor chord, press the

accompaniment area key that

corresponds to the major chord,

while also pressing one other

accompaniment area key to the

right.

C^#DE

F^#G A A B

C C^#DE F

● FINGERED 2

Unlike FINGERED 1, 6th input is not

possible. m7 or m7 5 is input.

Seventh Chords

C7 (C Seventh)

To play a seventh chord, press the

accompaniment area key that

corresponds to the major chord,

while also pressing two other

accompaniment area keys to the

right.

C^#DE

F^#G A A B

C C^#DE

● FINGERED 3

Unlike FINGERED 1, allows input of

fraction chords with the lowest keyboard

note as the bass note.

■ CASIO CHORD

Minor Seventh Chords

Cm7

(C Minor Seventh)

With CASIO CHORD, you can use

simplified fingerings to play the four types

of chords described below.

To play a minor seventh chord,

press the accompaniment area key

that corresponds to the major

chord, while also pressing three

other accompaniment area keys to

the right.

C^#DE

F^#G A A B

C C^#DE

Accompaniment keyboard

• When playing a minor, seventh, or minor seventh chord, it

makes no different whether the additional keys you press

are black or white.

■ FULL RANGE CHORD

With this mode, you can use the full range

of the keyboard to play chords and the

melody.

Accompaniment keyboard / Melody keyboard

E-38

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

■ Auto Accompaniment Fill-in

Use the procedure below to play a fill-in pattern during a

performance.

• A “fill-in” is a short phrase played where you want to change

the mood of a piece. A fill-in pattern can be used to create a

link between two melodies or an accent.

• Normal and variation patterns have their own unique fill-in

patterns.

Using Auto Accompaniment

Effectively

Auto Accompaniment Pattern Variations

Use the following procedures to play intro and ending

patterns, to play fill-in patterns, and to play variations of basic

Auto Accompaniment patterns.

● Normal Pattern Fill-in

■ Auto Accompaniment Variation

Each Auto Accompaniment pattern has a basic “normal

pattern” as well as a “variation pattern”.

1. While a normal pattern is playing, press

This plays the fill-in for the normal pattern.

• Normal pattern play will resume after the fill in pattern is

complete.

1. Press

Lights

This starts the variation pattern.

Lights

● Variation Pattern Fill-in

2. Pressing

returns to normal pattern.

1. While a variation pattern is playing, press

This plays the fill-in for the variation pattern.

Lights

• Variation pattern play will resume after the fill in pattern

is complete.

Lights

■ Auto Accompaniment Intro

Use the following procedure to play an intro of a few

measures.

■ Auto Accompaniment Ending

Use the following procedure to play an ending of a few

measures.

1. Press

This starts the intro pattern. Normal pattern play will start

when the intro pattern is finished.

1. While an Auto Accompaniment is playing, press

• If you press

the variation pattern will start when the intro pattern is

finished.

while an intro pattern is being played,

This will play the ending pattern and then stop Auto

Accompaniment play automatically.

Lights

E-39

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

■ Using Synchro Start

Adjusting the Accompaniment Volume

Use the following procedure to configure the Digital Keyboard

to start Auto Accompaniment play as soon as you press a

keyboard key.

Use the following procedure to adjust the balance between

what you are playing on the keyboard and the volume of the

Auto Accompaniment.

1. Press

and then use the

) keys to display “AcompVol” (page

(10-key) [4] (

)

and [6] (

This enters accompaniment start standby.

Flashes

E-6).

A c o

V o l

2. Play a chord on the keyboard.

2. Use the

(10-key) [–] and [+] keys to adjust the

accompaniment volume.

This will start full part accompaniment (normal).

Any of the following operations can be performed while in

synchro standby to start a non-normal pattern.

Using One-Touch Preset

With One-Touch Preset, the Digital Keyboard automatically

configures optimal tone, tempo, and other settings in

accordance with the rhythm pattern you select.

• To start with intro pattern, press

• To start with variation pattern play, press

Changing Auto Accompaniment Speed

(Tempo)

1. Hold down

until the current tone screen

appears on the display.

Use the following procedure to change Auto Accompaniment

speed to a level that suits you.

This will automatically apply the One-Touch Preset

settings in accordance with the rhythm pattern that is

currently selected.

1. Press

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

2. Play a chord on the keyboard.

This will start accompaniment automatically.

• Pressing y and t at the same time will initialize the

tempo setting in accordance with the currently selected

rhythm.

• While the tempo value is flashing, you also can use

(10-key) to change it.

• If you do not perform any operation for a few seconds

after the tempo setting screen appears, the display will

return to the screen displayed before you pressed

Flashes

E-40

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Auto Accompaniment

Type

number

Using Auto Harmonize

Type Name

Description

Auto Harmonize automatically adds harmony to notes you

play with your right hand, which adds rich depth to the melody

of your performances. You can select from among 12 types of

Auto Harmonize to suit the type of music you are playing.

001

Duet 1

Adds close (separated by 2 to 4

degrees) 1-note harmony below

the melody note.

002

Duet 2

Adds open (separated by more

than 4 to 6 degrees) 1-note

harmony below the melody note.

• Auto Harmonize is controlled using the same button

003

004

Country

Octave

Adds country style harmony.

the Arpeggiator (page E-56). Because of this, these two

functions cannot be used at the same time.

Adds the note from the next lower

octave.

1. Press

to enable Auto Accompaniment with

chords (ACCOMP indicator lit) (page E-37).

005

006

5th

Adds the fifth degree note.

3-Way Open Adds 2-note open harmony, for a

total of three notes.

• Auto Harmonize cannot be used while FULL RANGE

CHORD is selected as the chord input mode. Select

another mode if you want to use Auto Harmonize.

007

008

009

010

3-Way Close Adds 2-note close harmony, for a

total of three notes.

2. Hold down

until the Auto Harmonize or

Arpeggiator type number and type name appear

Strings

Adds harmony that is optimal for

strings.

on the display.

• If you do not perform any operation for a few seconds,

the display will return to previous screen automatically.

4-Way Open Adds 3-note open harmony, for a

total of four notes.

4-Way Close Adds 3-note close harmony, for a

total of four notes.

Type number

011

012

Block

Adds block chord notes.

Big Band

Adds big band style harmony.

4. Press

to turn on Auto Harmonize.

D u e t 1

If you play chords with your left hand and the melody with

your right hand, harmony notes will be added to the

melody.

Type name

• Press

again to turn off Auto Harmonize.

3. Use the

(10-key) [–] and [+] keys to select the

Auto Harmonize type you want.

Lit when on

• 013 through 102 are Arpeggiator types (page E-56). Do

not select them when using the Auto Harmonize.

S t G r P n o

D u e t 2

E-41

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing Auto Accompaniment Patterns

7 8 9 bkbl bm

You can use the procedure in this section to edit the Digital

Keyboard’s built-in Auto Accompaniment rhythm patterns and

create your own “user rhythms”.

• You can store up to 10 user rhythms in Digital Keyboard

memory, using rhythm numbers 201 through 210

(CTK-4000: 181 through 190).

■ Editable Contents

• Rhythm number

• Part on/off

• Tone number

• Volume level

• Left-right speaker balance (panning)

• Reverb depth (reverb send)

■ Editable Accompaniment Patterns and

Instrument Parts

• Chorus depth (chorus send)

Any of the following parts that make up each rhythm that is

assigned a rhythm number can be edited.

To edit and save an Auto Accompaniment

Accompaniment patterns (intro, fill-in, etc.): 6 types

Instrument parts (drum, bass, etc): 8 types

1. Select the number of the rhythm you want to

edit.

Accompaniment Pattern

2. Press

Rhythm number

Editable content

Instrument

Parts

Instrument part

D r

: R h

Drum

I-1

I-2

I-3

I-4

I-5

I-6

I-7

I-8

N-1 NF-1 V-1 VF-1 E-1

N-2 NF-2 V-2 VF-2 E-2

N-3 NF-3 V-3 VF-3 E-3

N-4 NF-4 V-4 VF-4 E-4

N-5 NF-5 V-5 VF-5 E-5

N-6 NF-6 V-6 VF-6 E-6

N-7 NF-7 V-7 VF-7 E-7

N-8 NF-8 V-8 VF-8 E-8

Percussion

Bass

Chord 1

Chord 2

Chord 3

Chord 4

Chord 5

Lights

Accompaniment Pattern (Flashes)

If the “Err Mem Full” message appears on the display, see

page E-74 for information about what you should do.

Button

E-42

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing Auto Accompaniment Patterns

7. To edit the other contents, press to display

3. Press a button from

to select the

Accompaniment Pattern you want to edit.

the screen for the setting you want.

The name of the pattern will appear on the display.

• Each press of

will cycle through the settings shown

below, from 1 through 6.

• Use the (10-key) [–] and [+] keys to change the

currently selected setting.

• You can play the current settings of the editable part by

D r

: R h

pressing

Setting Type

Part on/off

Display

Part

Settings

On/Off

Variation selected

001 - 553 (CTK-4000)

001 - 653 (CTK-5000)

Tone number*

Tone

Vol.

Pattern selected by each button

: Intro

Volume level

000 - 127

: Normal, Normal Fill-in

(Each press toggles the selection.)

: Variation, Variation Fill-in

(Each press toggles the selection.)

: Ending

Left-right speaker

balance (panning)

Pan

–64 - 0 - 63

Reverb depth

(reverb send)

Rvb

000 - 127

Chorus depth

(chorus send)

4. Press

to select the instrument part you want

to edit.

Cho.

* Instrument parts 1 and 2 can be assigned drum set tones

only.

The part number of the part you select will flash on the

display.

Parts that contain data.

Flashing: Part selected for editing.

8. Repeat steps 4 through 7 as many times as

necessary to edit the parts you want for the

pattern you selected in step 3.

• If you change the rhythm number in step 6, the editable

contents (1 through 6 in the above table) you last

configured in step 7 of this procedure will be overwritten

with the settings of the newly selected rhythm.

Part 6 (Chord 3)

5. Press

9. Repeat steps 3 through 8 as many times as

necessary to edit the accompaniment patterns

you want (intro through ending).

This will display the rhythm number.

6. Use the

(10-key) [–] and [+] keys to select the

rhythm number you want to assign to the

10. Press

instrument part you are editing.

A different rhythm number is assigned for each instrument

part.

This will display a message asking if you want to save the

user rhythm.

• You can play the data of the currently selected rhythm

number by pressing

• All of the eight instrument parts of an intro (I-1 to 8)

must have the same rhythm number. If you assign

rhythm 003 to I-1, for example, 003 also will be

assigned automatically to parts I-2 through I-8. If you

then assign rhythm 004 to part I-2, for example, I-1 and

all of the other parts also will change to 004. All of the

eight parts of an ending (E-1 to E-8) also must have the

same rhythm number.

E-43

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing Auto Accompaniment Patterns

11-1. Press the

(10-key) [–] key to exit without

■ Saving User Rhythm Data on an External Device

• SD memory card (CTK-5000 only) (page E-61)

• Computer (page E-68)

saving.

This displays the delete confirmation message.

Press the (10-key) [+] key to exit the editing procedure.

11-2. Press the

■ Maintaining User Rhythm Data in Memory

After you save user rhythm data in memory, it will remain

there as long as power is supplied to the keyboard. However,

if you disconnect the AC adaptor when there are no batteries

loaded, user rhythm data will be deleted.

(10-key) [+] key to save the data.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

F u n k 8 B t

• Use

(10-key) [–] and [+] keys to select the rhythm

number you want to save.

• You can edit the user rhythm name. Use the

(10-

Before connecting or disconnecting the AC adaptor or

key) [4] (

) and [6] (

) keys to move the cursor to

replacing batteries, first press

to turn off power.

the character you want to change, and then use [+] and

[–] to change the character.

12. Press

(10-key) [7] (ENTER) key.

This will display a message asking if you want to save the

user rhythm.

• Press the

(10-key) [+] key to save the data.

(10-key) [–] key to return to the screen

that was displayed before you pressed [7] (ENTER)

key.

• If you select a user rhythm number that already

contains data, the existing data will be replaced by the

new data.

• You cannot change the tone assigned to the keyboard

while an Auto Accompaniment editing (rhythm edit)

operation is in progress.

E-44

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing Auto Accompaniment Patterns

To delete saved data

The following procedure cannot be performed while an Auto

Accompaniment editing (rhythm edit) operation is in progress.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “DELETE” (page

E-6).

D E L E T E

Flashes

Used memory (Unit: Kbytes)

Remaining memory capacity

2. Press the

3. Press the

(10-key) [7] (ENTER) key.

(10-key) [6] (

) key.

U s e 1

User rhythm name

4. Use the

(10-key) [–] and [+] keys to select the

user rhythm you want to delete.

5. Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

S u r e ?

6. Press the

(10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

E-45

Download from Www.Somanuals.com. All Manuals Search And Download.

Saving Keyboard Setups to Registration Memory

7 8 9 bkbl bm bn bsbtckclcmcn

cq cs

Registration memory lets you store Digital Keyboard setups

■ Registration Save Example

(tone, rhythm, etc.) for instant recall whenever you need them.

Registration memory simplifies performance of complex

pieces that require successive tone and rhythm changes.

This example saves the data shown in the table below to the

following setups in Bank 1.

• Initial melody setup saved to Setup 1-1.

• Second melody setup saved to Setup 1-2.

• Third melody setup saved to Setup 1-3.

You can have up to 32 setups in Registration memory at one

time.

and

bt cm

are used for recording.

Setup 1–1 Setup 1–2 Setup 1–3

Tone Number

Rhythm Number

Tempo

001

118

080

062

005

140

001

089

■ Registration Memory Data

The following is the complete list of data that is saved to a

registration memory setup.

• Tone numbers (main, layer, split)

• Rhythm number

• Tempo

Area 1

Area 2

Area 3

Area 4

Bank 1

Bank 2

Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4

Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4

• Auto Harmonize

• Transpose

• Split point

• Touch Response

• Octave shift

Bank 8

Setup 8-1 Setup 8-2 Setup 8-3 Setup 8-4

• Chord fingerings

• Accompaniment volume

• Arpeggiator setting (on, off, type)

• Synchro start

• Reverb (on, off, type)

• Chorus (on, off, type)

• Bend Range (CTK-5000 only)

• Accomp (on, off)

• Arpeggiator hold (on, off)

• Layer (on, off)

• Each press of bank select button

bank numbers, from 1 to 8.

• Pressing a button from

cycles through the

selects the corresponding

bt cm

area in the currently selected bank.

• Split (on, off)

• Pedal effect

E-46

Download from Www.Somanuals.com. All Manuals Search And Download.

Saving Keyboard Setups to Registration Memory

To save a setup to registration

memory

To recall a setup from registration

memory

1. Press

to select the bank that contains the

setup you want to recall.

Lights

Bank 6

Bank number

2. Use buttons

to select the area whose

bt cm

2. Configure the tone, rhythm, and other settings

setup you want to recall.

you can to include in the setup.

This will recall the registration memory setup and

automatically configure the Digital Keyboard settings

accordingly.

3. Press

to select the bank you want.

Each press of

cycles through the bank numbers.

R e c a l l

Bank 4

• You also can select a bank by holding down

as you

Setup 6-1 recalled

use the

(10-key) number buttons to enter a bank

number.

4. While holding down , press a button from

• Notes currently being sounded by the keyboard may stop if

you recall a setup that causes a change in octave shift

(page E-16). To keep this from happening, either select a

setup that does not cause a change in the octave shift

setting, or hold down the pedal (which will cause notes

currently being played to be sustained).

to select an area.

This will save the settings you configured in step 2 into the

applicable setup.

• If there is anything already stored in the setup, it will be

replaced (deleted) by the new setup.

■ Saving registration Data on an External Device

• SD memory card (CTK-5000 only) (page E-61)

• Computer (page E-68)

■ Maintaining Data in Registration Memory

S t o r e

After you save data in registration memory, it will remain there

as long as power is supplied to the keyboard. However, if you

disconnect the AC adaptor when there are no batteries

loaded, data in registration memory will be deleted.

Stored in Setup 4-1

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

E-47

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

bqbpbo

bl bm

bsbtckclcmcn

The recorder feature lets you record your keyboard play.

4. Configure the tone, rhythm, and other settings

you want to use.

Recording and Playing Back

Keyboard Play

Use the following procedure to record everything you play on

the keyboard.

5. Start playing.

Recording starts as soon as you play something on the

keyboard.

• You can use Auto Accompaniment while playing. If you do,

Auto Accompaniment also will be recorded.

1. Press

2. Press

6. To stop recording, press

Lights

3. Press

again.

Lights

This will enter record stnadby.

7. To play back what you have recorded, press

Flashes

again.

Each press of

starts and stops playback.

Flashes

E-48

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

8. Press

twice to exit the recorder mode.

Using Tracks to Record and Mix

Parts

You can divide a song according to various types of parts

(instrument, left and right hand, etc.), and record each part to

a specific track. You can mix up to six tracks (the original track

plus five additional tracks) into a final song.

Disappears

• The flashing on the screen shown in step 3 becomes

faster when remaining recorder memory capacity

becomes less than 100 notes.

• Total recorder memory capacity is approximately

12,000 notes. Recording will stop automatically when

there is no more unused recorder memory remaining.

■ About tracks

Tracks are numbered from 1 to 6.

• If you do not specify a track number when recording,

recording is performed to Track 1 automatically.

In addition to what you play on the keyboard, the following

information also is recorded.

• Track 1

Settings:

• Each press of

cycles through the settings shown

below. You can listen to the recorded data as many

times as you like by pressing

standby.

while in playback

Tone number, rhythm number, tempo, reverb, chorus,

chords, layer/split settings, Auto Harmonize/Arpeggiator

setting

Playback

Recorder Off

Record

Standby

Operations:

Standby

Pedal, pitch bend wheel (CTK-5000 only), INTRO button,

SYNCHRO/ENDING button, NORMAL/FILL-IN button,

VARIATION/FILL-IN button

• Tracks 2 through 6

Tone number, pedal operation, pitch bend wheel operation

(CTK-5000 only)

Disappears

Lights

Flashes

■ To delete recorded data

After step 3 of the above procedure, do hold down

(without

pressing any keyboard key) until the message “Tr.Del?”

appears on the display. Press [+] (YES) to delete the data, or

[–] (NO) to cancel the delete operation.

• Turning off the Digital Keyboard while recording is in

progress will cause any data in recorder memory to be

deleted.

• A new recording replaces (deletes) previously recorded

contents.

■ Maintaining Data in Recorder Memory

After you save data in recorder memory, it will remain there as

long as power is supplied to the keyboard. However, if you

disconnect the AC adaptor when there are no batteries

loaded, data in recorder memory will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

E-49

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

6. Repeat steps 2 through 5 to record the other

To record to Tracks 1 through 6

tracks.

1. Record the first part to Track 1.

7. After you finish recording all of the tracks,

To record to Track 1, perform steps 1 through 4 under

“Recording and Playing Back Keyboard Play” (page

E-48).

press

• This will start playback of the recorded tracks. Press

to stop or restart playback.

Lights

• At this time you can turn off playback of specific tracks

using buttons to . Pressing a key toggles playback

bs cn

of each track on (track number displayed) or off (track

number not displayed).

• If you want to re-record a track, press . This will

return to step 2 of the above procedure. Only the tracks

that are turned on (displayed) above will play as you

re-record.

Lights

Example: Tracks 2 and 3 selected

2. Press

This will enter record standby.

Disappears

Flashes

8. Press

twice to exit the recorder mode.

Flashes

3. Press a button from

to select the track

bt cn

number of the next track to which you want to

record.

Disappears

This will enter record standby for the track you selected.

Example: Track 2

■ To delete a recorded track

After step 3 of the above procedure, do hold down

Flashes

(without

pressing any keyboard key) until the message “Tr.Del?”

appears on the display. Press [+] (YES) to delete the track, or

[–] (NO) to cancel the delete operation.

Flashes

• If you want to use a different tone than the one you

used in Track 1, press

input the tone number.

and then use

(10-key) to

4. Press

This will start playback of what you recorded up to this

point in other tracks and record what you play on the

keyboard to the currently selected track. Play the notes

you want on the keyboard.

5. To stop recording, press

• To play back what you have recorded, press

again.

Each press of

starts and stops playback.

E-50

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

Recording Two or More Songs,

and Selecting One for Playback

Recording while Playing Along

with a Built-in Song

You can record up to five songs (numbered 1 through 5) in

memory. After that, you can select a specific song for

playback.

This section explains how to play along and record along with

one of the Digital Keyboard’s built-in songs.

● The following operations and settings also are

recorded along with your keyboard play.

Tone number, song number, pedal operation, tempo, reverb,

chorus, layer/split settings, pitch bend wheel operation

(CTK-5000 only)

1. Press

2. Press

A song number will appear in the upper left corner of the

display for a few seconds. While it is, use

(10-key) to

specify the number of the song you want to record or play

back. The song number will disappear if you do not

perform any operation.

• There can be only one recording of keyboard play with a

built-in song in recorder memory. Making a new recording

replaces (deletes) previously recorded data.

Example: Song 2

1. Press

2. Press

This will enter playback standby.

P l a

N o .

to play back.

3. Press

to record, or

To stop recording or playback, press

4. Press

twice to exit the recorder mode.

Lights

■ To delete recorded data

After step 2 of the above procedure, do hold down

3. Press

again.

(without

This will enter record standby.

pressing any keyboard key) until the message “Song Del?”

appears on the display. Press [+] (YES) to delete the song, or

[–] (NO) to cancel the delete operation.

Flashes

4. Use

(10-key) to enter the song number you

want to assign to the recording.

E-51

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

5. Press

to cycle through the parts in the

sequence shown below.

Saving Recorded Data on an

External Device

You can save data you record with the Digital Keyboard onto

an SD memory card or on your computer’s hard disk. In the

case of an SD memory card, you can save recorded song

data as a standard MIDI file (SMF 0 format).

Right-hand Recording

Left-hand Recording

Both-hand Recording

■ To save data to an SD memory card

(CTK-5000 only)

See page E-61.

■ To save data on your computer’s hard disk

See page E-68.

Example: Left-hand part recording

Flashes

• Configure tone and tempo settings at this time as well.

6. Press

to start built-in song playback and

recorder recording.

Play along with the playback.

• To stop recording part way through, press

7. Recording will stop automatically when the end

of the built-in song is reached.

This will enter playback standby.

Lights

8. Press

This will start playback of what you recorded.

• Each press of starts and stops playback.

9. Press

twice to exit the recorder mode.

Disappears

■ To delete recorded data

After step 2 of the above procedure, do hold down

until the

message “Song Del?” appears on the display. Press [+] (YES)

to delete the song.

E-52

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

bpbo

btckclcmcn

cq cs

3. Use the

(10-key) [–] and [+] keys to select the

Scale Editor option you want.

Changing the Scale of the

Keyboard

You can use the procedure in this section to change the scale

(tuning system) of the keyboard from the standard equal

temperament to another scale that is more suitable for playing

Indian music, Arabic music, ancient classics, etc.

• If you do not perform any operation for a few seconds

after the selection screen appears, the display will

return to the previous screen automatically.

4. Press

Now you can perform one of the scale editing operations

described below.

Using the Scale Editor (CTK-5000 Only)

■ Scale Fine Tune

The Scale Editor provides you the following four options for

changing the scale.

1. Press the key whose note you want to change,

and then use the

(10-key) [–] and [+] keys to

Display

Description

Indicator

change the tuning value.

Scale Fine

Tune

“Fin”

“ScalMode”

Changes the tuning value

in 1-cent steps within the

range of +99 to –99 cents.

2. After you are finished, press

to assign the

scale to the keyboard.

Quarter Tone “qUA”

“ScalMode”

Lowers the tuning value by

–50 cents. Use the option

to lower the E and G notes

of the scale for Arabic

music.

Tuning value

Preset

Equal

“PrE”

“ScalMode”

Use this option to select

from among a collection of

preset scales.

F i n : C

Keyboard key

“EqU”

Changes the scale to the

standard equal

Temperament “ScalMode”

temperament.

The keyboard key(s) whose notes were changed will be lit.

1. Press

2. Press

and

at the same time.

S c a l

o d e

E-53

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

■ Quarter Tone

■ Preset

1. Press the key whose note you want to change,

1. Use the

(10-key) [–] and [+] keys to select the

and then press the (10-key) [–] key to reduce

preset scale you want. After selecting a scale,

press the key on the keyboard that you want to

use as the root key (C to B).

the tuning value by –50 cents. You can return to

the original tuning by pressing [+].

2. After you are finished, press

to assign the

2. After you are finished, press

to assign the

scale to the keyboard.

Tuning value

P u r e

i n r

Q u a : E

Scale Name

Keyboard key

No.

Scale name

Pure Major

Display

PureMajr

Pure Minor

Pythagorean

Kirnberger 3

Werckmeister

Mean-Tone

Rast

PureMinr

Pythagor

Kirnbrg3

Wercmeis

MeanTone

Rast

The keyboard key(s) whose notes were changed will be lit.

• You can perform a Quarter Tone operation without using

the Scale Editor (page E-53). Hold down the

button and

press the desired keyboard key. This will lower the tuning

value of the keyboard key by –50 cents. If the tuning value

of the key you press was previously lowered by –50 cents,

performing the above operation will raise it +50 cents,

which returns to its original value.

Bayati

Hijaz

Saba

Dashti

Chahargah

Segah

Chaharga

Segah

Gurjari Todi

Chandrakauns

Charukeshi

GujrTodi

Cndrkuns

Carukesi

■ Equal Temperament

Select this option to change the keyboard scale to the

standard equal temperament.

S c a l

o d e

E-54

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

■ Saving Data on an External Device

(CTK-5000 only)

• SD memory card (page E-61)

• Computer (page E-68)

Recalling a Preset Scale (CTK-4000 Only)

You can use the following procedure to select from among 17

preset scales, including the standard Equal Temperament.

1. Press

2. Press

■ Maintaining Data in User Scale Memory

(CTK-5000 only)

After you save data in user scale memory, it will remain there

as long as power is supplied to the keyboard. However, if you

disconnect the AC adaptor when there are no batteries

loaded, data in user scale memory will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

E u a l

Scale Name

3. Use the

(10-key) [–] and [+] keys to select the

preset scale you want. After selecting a scale,

press the key on the keyboard that you want to

use as the root key (C to B).

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

• There are a total of 17 scales: the 16 shown in the table

above (page E-54) plus Equal Temperament (Number:

00, Scale Name: Equal).

Using the Current Scale Notes for Auto

Accompaniments

You can use the following procedure to reflect the scale you

adjusted using the scale fine tune or the quarter tone function,

or the preset scale you selected with the preset function in

Auto Accompaniments.

4. After you are finished, press

to assign the

scale to the keyboard.

Saving User Scales (CTK-5000 Only)

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “OTHER” (page

You can store up to four “user scales” configured by you in

memory for later recall when you need them.

E-6).

■ To save a user scale

1. Press

2. Press

O T H E R

3. While holding down , press a button from

Flashes

to select an area.

2. Press

(10-key) [7] (ENTER) key.

■ To recall a user scale

3. Use the

(10-key) [4] (

to display “AcompScl”.

) and [6] (

) keys

1. Press

2. Press

4. Use the

(10-key) [+] key to select on.

3. Use buttons

to select the user scale

bt cm

you want to recall.

E-55

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

Using Music Preset

Using the Arpeggiator

Selecting a Music Preset instantly changes the Digital

Keyboard to a preset setup (tone, rhythm, tempo, etc.) for play

of songs of various genres/categories. The press of a button

sets up the Digital Keyboard so those songs sound exactly the

way you thought they should.

The Arpeggiator makes it possible to play an arpeggio pattern

automatically. There are 90 different arpeggio patterns from

which to choose in order to match the music you are playing.

• See the separate “Appendix” for a complete list of the 305

Music Presets that are available.

• The Arpeggiator is controlled using the same button

Auto Harmonize (page E-41). Because of this, these two

functions cannot be used at the same time.

1. Hold down

until the indicator shown below

appears on the display.

1. Hold down

until the Auto Harmonize or

Arpeggiator type number and type name appear

on the display.

Preset number

• If you do not perform any operation for a few seconds,

the display will return to the previous screen

automatically.

Type number

I L o v e H e r

Preset name

D u e t 1

Lights

Type name

2. Use the

(10-key) [–] and [+] keys to select the

Arpeggiator type you want.

• 001 through 012 are Auto Harmonize types (page

E-41). Do not select them when using the Arpeggiator.

2. Use

(10-key) to select the preset number you

want.

This will change the setup (tone, rhythm, etc.) of the

Digital Keyboard.

• At this time the Digital Keyboard will go into Auto

Accompaniment synchro start standby (page E-40).

1 U

• Pressing

, or

will return to the screen that was

bo bp bq

displayed before you held down in step 1, above.

Speed (The number of arpeggio notes per beat)

3. Play along on the keyboard with the

Octave

1...Uses the actual notes played.

2...Uses the actual notes played plus the same notes one

accompaniment.

octave.

4...Uses the actual notes played plus the same notes three

octaves.

E-56

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

Type

number

Deleting User Song Data

Type Name

Description

You can use the following procedure to delete user song data

stored as song numbers 153 through 162.

013-030 Up

Rising

Falling

031-048 Down

1. Press

and then use the

(10-key) [4] (

)

and [6] (

Repeat pattern alternating

between rising and falling

(Type A)

) keys to display “DELETE” (page

049-066 U/D A

E-6).

Repeat pattern alternating

between rising and falling

(Type B)

067-084 U/D B

Random arrangement of

notes of the pressed keys

085-102 Random

D E L E T E

3. Press

to turn on Arpeggiator.

Playing a chord on the keyboard will start arpeggio play.

Flashes

Used memory (Unit: Kbytes)

• Press

again to turn off Arpeggiator.

Lit when on

Remaining memory capacity

2. Press the

3. Press the

(10-key) [7] (ENTER) key.

S t . G r P n o

(10-key) [6] (

) button twice.

• The tempo setting of the Arpeggiator is the same as that set

for the metronome (page E-11).

Sustaining an Arpeggio (Arpeggiator Hold)

U S E R S O N G

Use the following procedure when you want an arpeggio

pattern to keep playing after you release the keyboard keys.

User song name

1. Press

and then use the

(10-key) [4] (

)

and [6] (

4. Use the

(10-key) [–] and [+] keys to select the

user song you want to delete.

) keys to display “OTHER” (page

E-6).

5. Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

2. Press

(10-key) [7] (ENTER) key.

p g

(10-key) [+] key to select the ON

S u r e ?

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

A r e H l d

6. Press the (10-key) [+] (YES) key.

3. Press the

setting.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

E-57

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Digital Keyboard Functions

5. Press the

(10-key) [+] (YES) key.

Deleting All Data in Digital

Keyboard Memory

Use the following procedure when you want to delete sampled

sounds, user songs and all other data, except for recorded

songs, currently in Digital Keyboard memory.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

• Performing this procedure also will delete protected

sampled sound data (page E-24). It is recommended

that you save important data to a memory card (page

E-59) or your computer’s hard disk (page E-65).

• This operation does not delete recorded song data.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “DELETE” (page

E-6).

D E L E T E

Flashes

Used memory (Unit: Kbytes)

Remaining memory capacity

2. Press the

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “All Data”.

) and [6] (

) keys

A l l D a t a

Flashes

4. Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

S u r e ?

E-58

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

cs ct

Your Digital Keyboard’s SD memory card

slot makes it possible for you to store

record memory and other data on a

commercially available SD memory card.

SD Memory Card and Card Slot

Precautions

● Supported SD Memory Cards

Your Digital Keyboard supports the use of memory cards up

to 2 GB. Use of any SD memory card with greater capacity is

not supported. See the instructions that come with the SD

memory card for information about its capacity.

• When using an SD memory card, make sure you

observe all of the precautions in the instructions that

come with it.

• SD memory cards have a write-protect switch that you

can use to protect against accidental deletion of data.

• Avoid using an SD memory card under the following

conditions. Such conditions can corrupt data stored on

the memory card.

• Areas subjected to high temperature, high humidity,

and corrosive gas

• Areas subjected to strong electrostatic charge and

digital noise

• Never touch the contacts of an SD memory card when

loading it or removing it from the Digital Keyboard.

• While data is being stored to or recalled from an SD

memory card, never perform any other Digital

Keyboard operation or remove the SD memory card.

Doing so can corrupt the data on the card and damage

the card slot.

• Never insert anything besides an SD memory card into

the card slot. Doing so creates the risk of malfunction.

• Electrostatic charge discharging from your fingers or

the SD memory card to the card slot can cause

malfunction of the Digital Keyboard. If this happens,

turn the Digital Keyboard off and then back on again.

• An SD memory card can become quite warm after very

long use in the SD memory card slot. This is normal

and does not indicate malfunction.

User data that can be saved and loaded

File Name

Data Type

Description

Extension

Sampled sound

(page E-18)

TW7

Sampled sound data

DW7^*1

User rhythms

(page E-42)

Edited Auto

Accompaniment data

AC7

Song data imported from

User songs

(page E-28)

an external device (cannot CM2

be saved to an SD memory MID^*2

card).

Recorded songs

(page E-48)

SP7

Recorded song data

SL7^*3

User scale

memory

Edited scale data

ST7

(page E-53)

Registration

setups

(page E-46)

Tone and rhythm setup

settings

RM7

AL7

All data

Above data

*1: Sampled drum set sounds

*2: Standard MIDI file (format 0, 1)

*3: Data recorded playing along with built-in song

• Use only SD memory cards. Operation is not

guaranteed when any other type of memory card is

used.

E-59

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

Inserting and Removing an SD

Memory Card

Formatting an SD Memory Card

• Before using an SD Memory card, first be sure to

format it on the Digital Keyboard.

• Before performing the procedure below, check to make

sure that the SD memory card does not contain any

data you might need.

• The SD memory card format performed by the Digital

Keyboard is a “quick format”. If you want to completely

delete all of the data on the card, format it on your

computer or using some other device.

• Note that the SD memory card must be oriented

correctly when you insert it into the SD memory card

slot. Trying to force the memory card into the slot can

damage the card and the slot.

1. With the top of the SD memory card facing

upwards (so you can see it), carefully insert the

card into the keyboard’s SD memory card slot

1. Insert the SD memory card you want to format

(

) until stops with a click.

into the Digital Keyboard’s card slot.

• Make sure that the write-protect switch of the SD

memory card is not in the write-protect position.

2. Press

and

at the same time.

Front

2. Press the SD memory card into the card slot

F o r

a t

and then release it.

This will cause the card to disengage and eject partially.

Pull the card out of the slot.

3. Press the

(10-key) [7] (ENTER) key.

This will display the format confirmation screen.

S u r e ?

4. Press the

(10-key) [+] (YES) key.

The message “Pls wait” will appear on the display. Do not

perform any operation while this message is displayed.

“Complete” appears on the display after formatting is

complete.

• To cancel the format operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

P l s w a i t

C o

l e t e

E-60

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

(10-key) [4] ( ) and [6] ( ) keys

to display one of the settings shown below.

• You also could use [–] and [+].

4. Use the

Saving Digital Keyboard Data to

an SD Memory Card

Use the following procedure to save Digital Keyboard data to

an SD memory card.

To save this data

Sampled sound

User rhythm

Display this screen

“SAv” “SmplTone”

1. On the Digital Keyboard, select the data you

“SAv” “UserRhy.”

“SAv” “Rec.Song”

want to save as described below.

Recorded song

(SMF 0 format)

To save this type

Do this

“SAv” “SMF 0”

of data

User Scale Memory

Registration data

All data

“SAv” “ScaleMem”

“SAv” “Regist.”

Sampled sound

Select the tone number of the sampled

sound you want to save.

User rhythm

Select the rhythm number of the user

rhythm you want to save.

“SAv” “All Data”

Saving a recording made while playing along with a built-in

song in SMF 0 format will save only what was played on the

keyboard.

Recorded song

Select the song you want to save and

put the Digital Keyboard in playback

standby.

5. Press the

(10-key) [7] (ENTER) key.

User scale

memory

Press

and then

Registration data

All data

Select one of the Digital Keyboard’s

default built in tones or rhythms.

• You cannot save a user song (song data loaded from

an external device) to an SD memory card.

• See page E-59 for information about data types.

U S E R N A

• Enter the file name of the data you are saving. Use the

(10-key) [4] ( ) and [6] ( ) keys to move the

Flashes

2. Insert a SD memory card into the Digital

Keyboard’s card slot.

cursor to the character you want to change, and then

use [+] and [–] to change the character.

• Pressing [9] (EXIT) will return to the screen that was

displayed before you pressed [7] (ENTER).

3. Hold down

until the button lights.

• To cancel data save, press

again.

Example: Saving a sampled sound

6. Press the

(10-key) [7] (ENTER) key.

This will save the data to the SD memory card.

l T o n e

Flashes

C o

l e t e

• If there is a file with the same name already on the SD

memory card, a message will appear asking if you want

to overwrite it. Press the

(10-key) [+] (YES) key to

overwrite, or [–] (NO) or [9] (EXIT) to cancel.

R e l a c e ?

E-61

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

Loading Data from an SD Memory

Card into Digital Keyboard

Memory

Use the following procedure to load data from an SD memory

card into Digital Keyboard memory.

• You can input the following characters in a file name.

(

}

M N O

V W X

{

• Whenever you copy a file to the SD memory card that

you plan to recall on the Digital Keyboard, be sure to

store the file in the SD memory card’s “MUSICDAT”

folder.

)

@ ~

• The Digital Keyboard displays the “~” character as “3”.

■ SD Memory Card Data (File) Storage Locations

The above procedure stores Digital Keyboard data in a folder

named “MUSICDAT” on the SD memory card.

1. On the Digital Keyboard, select the data you

want to load as described below.

• The “MUSICDAT” folder is created automatically when you

format the SD memory card on the Digital Keyboard (page

E-60).

To load this type

Do this

of data

• If you store a file in any location other than inside the

“MUSICDAT” folder, you will not be able to recall, delete, or

play the file on the Digital Keyboard. You also will not be

able to recall, delete, or play any file you store inside of a

subfolder you create inside the “MUSICDAT” folder.

• The message “No File” will appear on the display if you try

to perform a recall, delete, or play operation while there is

no file inside the “MUSICDAT” folder.

Sampled sound

User rhythm

User song

Select the tone number of the sampled

sound you want to load.

Select the rhythm number of the user

rhythm you want to load.

Select the song number of the song you

want to load.

Recorded song

Select the song you want to load and

put the Digital Keyboard in playback

standby.

User scale

memory

Press

and then

Registration data Select one of the Digital Keyboard’s

default built in tones, songs, rhythms,

etc.

All data

2. Insert the SD memory card that contains the

data into the Digital Keyboard’s card slot.

3. Hold down

until the button lights.

• To cancel data load, press

again.

4. Use the

(10-key) [4] (

to display one of the settings shown below.

) and [6] (

) keys

• You also could use [–] and [+].

To load this data

Sampled sound

User rhythm

Display this screen

“Lod” “SmplTone”

“Lod” “UserRhy.”

“Lod” “UserSong”

“Lod” “Rec.Song”

“Lod” “ScaleMem”

“Lod” “Regist.”

User song

Recorded song

User scale memory

Registration data

All data

“Lod” “All Data”

E-62

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

5. Press the

(10-key) [7] (ENTER) key.

Deleting Data from an SD Memory

Card

Use the following procedure to delete data saved on an SD

memory card.

1. On the Digital Keyboard, select the data you

* * * * * * * *

• Pressing [9] (EXIT) will return to the screen that was

displayed before you pressed [7] (ENTER).

want to delete as described below.

Flashes

To delete this

Do this

type of data

Sampled sound

User rhythm

User song

Select the tone number of the sampled

sound.

6. Use the

(10-key) [–] and [+] keys to select the

data (file) you want to load.

Select the rhythm number of the user

rhythm.

7. Press the

(10-key) [7] (ENTER) key.

Select the song number of the user

song.

This will load the data into Digital Keyboard memory.

Recorded song

Select the song and put the Digital

Keyboard in playback standby.

User scale

memory

Press

and then

C o

l e t e

Registration data

All data

Select one of the Digital Keyboard’s

default built in tones, songs.

• If there is already data stored in the user area where

you are trying to load data, an overwrite confirmation

message will appear. Press the

key to overwrite, or [–] (NO) or [9] (EXIT) key to cancel.

(10-key) [+] (YES)

2. Insert a SD memory card into the Digital

Keyboard’s card slot.

3. Hold down

until the button lights.

• To cancel data delete, press

again.

4. Use the

(10-key) [4] (

to display one of the settings shown below.

) and [6] (

) keys

R e l a c e ?

• You also could use [–] and [+].

To delete this type

Display this screen

of data

Sampled sound

User rhythm

“dEL” “SmplTone”

“dEL” “UserRhy.”

“dEL” “UserSong”

“dEL” “Rec.Song”

“dEL” “ScaleMem”

“dEL” “Regist.”

User song

Recorded song

User scale memory

Registration data

All data

“dEL” “All Data”

E-63

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a Memory Card (CTK-5000 Only)

5. Press the (10-key) [7] (ENTER) key.

Playing Back Data from an SD

Memory Card

You can use the following procedure to play back user song

data (page E-59) directly from an SD memory card.

* * * * * * * *

• Pressing [9] (EXIT) will return to the screen that was

displayed before you pressed [7] (ENTER).

• Whenever you copy a file to the SD memory card that

you plan to play on the Digital Keyboard, be sure to

store the file in the SD memory card’s “MUSICDAT”

folder (page E-62).

Flashes

1. Insert the SD memory card that contains the

6. Use the

(10-key) [–] and [+] keys to select the

number of the data (file) you want to delete.

data into the Digital Keyboard’s card slot.

2. Press

7. Press the

(10-key) [7] (ENTER) key.

This will display the delete confirmation screen.

This will display the file numbers and song names for the

data stored on the display.

3. Use

(10-key) to select the song you want to

play.

4. Press

S u r e ?

This will start playback.

• Each press of

starts and stops playback.

8. Press the

(10-key) [+] (YES) key.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

SD Memory Card Error Messages

For information about SD memory card error messages, see

page E-74.

C o

l e t e

E-64

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting External Devices

Connecting the Digital Keyboard to Your

Computer

Connecting a Computer

You can connect the Digital Keyboard to a computer and

exchange MIDI data between them. You can send play data

from the Digital Keyboard to music software running on your

computer, or you can send MIDI data from your computer to

the Digital Keyboard for playback.

• Make sure you follow the steps of the procedure below

exactly. Connecting incorrectly can make data send

and receive impossible.

Minimum Computer System Requirements

1. Turn off the Digital Keyboard and then start up

your computer.

The following shows the minimum computer system

requirements for sending and receiving MIDI data. Check to

make sure that your computer complies with these

requirements before connecting the Digital Keyboard to it.

• Do not start up the music software on your computer

yet!

2. After starting up your computer, use a

commercially available USB cable to connect it

to the Digital Keyboard.

• Operating System

Windows^®XP (SP2 or later)^*1

Windows Vista^{® *2}

Mac OS^®X (10.3.9, 10.4.11 or later, 10.5.2 or later)

B connector

*1: Windows XP Home Edition

Windows XP Professional (32- bit)

*2: Windows Vista (32- bit)

USB cable

(A-B type)

• USB port

Digital Keyboard USB port

A connector

• Never connect to a computer that does not conform to

the above requirements. Doing so can cause problems

with your computer.

Computer USB port

3. Turn on the Digital Keyboard.

• If this is the first time you are connecting the Digital

Keyboard to your computer, the driver software

required to send and receive data will be installed on

your computer automatically.

4. Start up your computer’s music software.

E-65

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting External Devices

5. Configure the music software settings to select

Navigate Channels

one of the following as the MIDI device.

The navigate channels can be used to display only the notes

of a particular channel (part) as on-screen guide information

from among the note information of a tune sent from the

computer.

CASIO USB-MIDI : (For Windows Vista, Mac OS X)

USB Audio Device : (For Windows XP)

• For information about how to select the MIDI device,

see the user documentation that comes with the music

software you are using.

■ Specifying the Navigate Channels

From among the 16 available channels (numbered 01 to 16),

you can specify any two neighboring channels (such as 05

and 06) as navigate channels. The smaller numbered channel

is the navigate (L) channel, while the larger numbered

channel is the navigate (R) channel. Specifying the navigate

(R) channel will automatically configure the navigate (L)

channel as well.

• Be sure to turn on the Digital Keyboard first before

starting up your computer’s music software.

• Once you are able to connect successfully, there is no

problem with leaving the USB cable connected when you

turn off your computer and/or Digital Keyboard.

• This Digital Keyboard conforms to General MIDI Level 1

(GM).

• For detailed specifications and connections that apply to

MIDI data send and receive by this Digital Keyboard, see

the latest support information provided by the website at the

following URL.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “MIDI” (page E-6).

2. Press

(10-key) [7] (ENTER) key.

3. Use the

(10-key) [4] (

to display “Navi. Ch”.

) and [6] (

) keys

http://world.casio.com/

MIDI Settings

N a v i . C h

Keyboard Channel

4. Use the

(10-key) to specify the navigate (R)

A keyboard channel is the channel used for sending Digital

Keyboard data to a computer. You can select the channel you

want for sending Digital Keyboard data to a computer.

• The keyboard channel setting range is 01 to 16.

channel.

This also will automatically configure the next lower

channel number as the navigate (L) channel.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “MIDI” (page E-6).

I D I

Flashes

2. Press

(10-key) [7] (ENTER) key.

K e b d C h

3. Use the

(10-key) [–] and [+] keys to change

the keyboard channel.

E-66

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting External Devices

■ Turning Off the Navigate Channel Sound and

Playing the Part on the Keyboard

Local Control

There are times when exchanging data with a computer when

you may not want the Digital Keyboard to sound notes you

play on its keyboard. The local control setting lets you do just

that.

You can turn off the sound on one or both of the navigate

channels and play the cancelled part on the keyboard

yourself.

1. Press

to select the channel setting you want

to turn off.

1. Press

and then use the

(10-key) [4] (

)

and [6] (

) keys to display “MIDI” (page E-6).

Each press of

cycles through settings (1) thorough (4)

described below.

2. Press

(10-key) [7] (ENTER) key.

• If you turn off one channel, you can play the cancelled

part on the keyboard using the same tone as the

channel you turned off. If you turn off both channels

(option (3)), what you play on the keyboard sounds

using the tone of the navigate (R) channel.

3. Use the

(10-key) [4] (

) and [6] (

) keys

to display “Local”.

Selected channel indicator appears.

L o c a l

4. Use the

(10-key) [–] and [+] keys to specify

the local control setting.

Navigate (L)

Channel

Navigate (R)

Channel

Accomp Out

On-

Enabling the Accomp Out setting causes Auto

Accompaniment data to be sent to the computer.

Sound screen Sound screen

Guide

1. Press

and then use the

(10-key) [4] (

)

and [6] (

(1) R only displayed

(2) L only displayed

(3) LR displayed

{

) keys to display “MIDI” (page E-6).

{

2. Press

(10-key) [7] (ENTER) key.

{

(4) LR nor displayed

{

3. Use the

(10-key) [4] (

) and [6] (

) keys

to display “AcompOut”.

A c o

O u t

4. Use the

(10-key) [–] and [+] keys to turn

Accomp Out on or off.

E-67

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting External Devices

Storing and Loading Digital

Keyboard Memory Data

• Since the accompaniment data is for other models, you

may experience some abnormalities when playing it on this

model.

You can transfer sampled sounds, recorded songs, and other

data in Digital Keyboard memory to a computer for storage.

You also can load standard MIDI file (SMF) data, and Auto

Accompaniment data you download from the CASIO website

to the Digital Keyboard, which greatly expands the Song Bank

songs and Auto Accompaniment patterns available to you.

A special Data Manager application is required in order to

transfer data to and from the Digital Keyboard.

■ Maintaining Data in Memory

After you save data in memory, it will remain there as long as

power is supplied to the keyboard. However, if you disconnect

the AC adaptor when there are no batteries loaded, saved

data will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Data Types Supported for Data Transfer

The same types of data that you can store to or recall from an

SD memory card (page E-59) can be transferred to and from

the Digital Keyboard. Note, that recorded song data can be

transferred to a computer in the Digital Keyboard’s native

format only. You cannot save recorded song data to a

computer as a standard MIDI file (SMF format). With the

CTK-5000 (only), you can save and recall scale memory data.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

Downloading Data Manager

1. Go to the CASIO WORLDWIDE site at the

following URL.

http://world.casio.com/

2. At the site, select a geographic area or country.

3. After accessing the area site, navigate to the

minimum computer system requirements for

Data Manager for this product.

• You should be able to find a link to Data Manager

information on the product introduction page of this

product. If you cannot find such a link, use the search

form of the area site where you are located to enter the

model name of this product and search for it.

• Note that site contents are subject to change without

notice.

4. Check if your computer system complies with

the minimum requirements for Data Manager.

5. Download Data Manager and its user’s guide to

your computer.

6. Follow the procedure in the user’s guide that

you downloaded in step 5 to install and use

Data Manager.

• You can download accompaniment data from the

Internet Data Expansion system of the CASIO MUSIC

SITE (http://music.casio.com/) and load it into the

memory of this Digital Keyboard. Note that there is not

any accompaniment data intended specifically for this

model, so you should use data for other models.

E-68

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting External Devices

Playing an External Device from the Digital

Keyboard

Connecting to Audio Equipment

This Digital Keyboard can be connected to commercially

available stereo, amplifier, or recording equipment, to a

portable audio player or other equipment.

Connection requires commercially available connecting cords,

supplied by you. The connecting cords should have a stereo

mini plug on one end and a plug that matches the

configuration of the external device on the other end.

Outputting Keyboard Notes to Audio

Equipment

Connection requires commercially available connecting cords,

supplied by you.

• Turn off the Digital Keyboard when making

connections. After connecting, turn down the Digital

Keyboard and external device volume levels whenever

turning power on or off.

• After connecting, turn on the external device and then

the Digital Keyboard.

• If notes are distorted when they are sounded on the

external device, lower the volume setting of the

external device.

• Turn off the external device when making connections.

After connecting, turn down the Digital Keyboard and

external device volume levels whenever turning power

on or off.

• After connecting, turn on the Digital Keyboard and then

the external device.

Stereo mini plug

• If keyboard notes sound distorted when they are

sounded from external audio equipment, lower the

Digital Keyboard’s volume setting.

Portable audio player, etc.

■ CTK-4000

Stereo standard plug

Digital Keyboard AUDIO IN jack

Audio equipment, amplifier,

etc.

Digital Keyboard PHONES/OUTPUT jack

■ CTK-5000

Digital Keyboard

LINE OUT R, L/MONO jack

Audio equipment, amplifier,

etc.

Standard plug

E-69

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Troubleshooting

Symptom

Action

Included Accessories

I can’t find something that should be here.

Power Requirements

Carefully check inside all of the packing materials.

Power will not turned on.

• Check the AC adaptor or make sure that the batteries are facing

correctly (page E-8).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

The Digital Keyboard outputs a loud sound and then Replace the batteries with new ones or switch over to AC adaptor

suddenly powers down. power (page E-8).

The Digital Keyboard suddenly powers down after a This happens when Auto Power Off (page E-9) is triggered.

few minutes.

Display

The display keeps going out or are flashing.

Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

On-screen keyboard keys or notes remain on the

display.

A Step Up Lesson is in progress and the Digital Keyboard is waiting

for you to play the next note in the song. To stop this from happening,

cancel the lesson (page E-31).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard key.

• Adjust the main volume setting (page E-9).

• Check if something is plugged into (CTK-4000: PHONES/

OUTPUT jack) (CTK-5000: PHONES jack) on the back of the

Digital Keyboard.

• If there is no sampled sound in memory, nothing will play if you

press a keyboard key while a tone in the range of 671 to 678 (CTK-

4000: 571 to 578) is selected (page E-18).

• Turn power off and then back on to initialize all keyboard settings

(page E-9).

Nothing happens or notes do not play normally when Press

to disable chord input in the accompaniment keyboard area

I play notes on the left side of the keyboard.

(page E-37).

Nothing happens when I start an Auto

Accompaniment.

• With rhythms 190, and 192 to 200 (CTK-4000: 170, and 172 to

180), nothing will sound until you play a chord on the keyboard. Try

playing a chord (page E-37).

• Check and adjust the accompaniment volume setting (page E-40).

• If there is no user rhythm stored in memory, Auto Accompaniment

will not start when you press

while a rhythm in the range of 201

to 210 (CTK-4000: 181 to 190) is selected (page E-42).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Nothing happens when I start playback of a built-in

song.

• It takes a little time after you press the button until the song starts to

play. Wait for a moment for the song to start.

• Check and adjust the song volume (page E-28).

• If there is no user song stored in memory, song playback will not

start when you press

selected (page E-28).

while a song in the range of 153 to 162 is

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

E-70

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Symptom

Action

The metronome does not sound.

• Check and adjust the accompaniment volume setting (page E-40).

• Check and adjust the song volume (page E-28).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Notes keep sounding, without stopping.

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

Some notes are cut off while they are playing.

The volume or tone setting I made has changed.

Notes are cut off whenever the number of notes being sounded

exceeds the maximum polyphony value of 48 (24 for some tones).

This does not indicate malfunction. See “Maximum Polyphony” in the

“Tone List” in the separate “Appendix”.

• Adjust the main volume setting (page E-9).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

Output volume does not change even though is

change my keyboard touch.

• Change the Touch Response setting (page E-10).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

In certain keyboard ranges, the volume and tone

quality sound are slightly different from those in other

keyboard ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change at the far

ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other

accompanying instruments or sounds strange when

played long with other instruments.

• Check and adjust the transpose (page E-15) and tuning settings

(page E-15).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

The reverb of notes seems to change suddenly.

• Check and adjust the reverb setting (page E-14).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Operation

When I perform a skip forward or skip back

operation, the skip operation moves multiple song

measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress,

skip forward and skip back operations are performed in phrase units

(page E-26).

Tone, rhythm, and other settings revert to their initial Though Digital Keyboard settings reset when you turn off the Digital

defaults whenever you turn on the Digital Keyboard. Keyboard, you can save setups to registration memory for instant

recall whenever you need them (page E-46).

Computer Connection

I can’t exchange data between the Digital Keyboard • Check to make sure that the USB cable is connected to the Digital

and a computer.

Keyboard and computer, and that the device is selected correctly

with your computer’s music software settings (page E-65).

• Turn off the Digital Keyboard and then exit the music software on

your computer. Next, turn the Digital Keyboard back on and then

restart the music software on your computer.

E-71

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Specifications

Models

CTK-4000 / CTK-5000

61 standard-size keys

2 types, Off

Keyboard

Touch Response

Maximum Polyphony

Tones

48 notes (24 for certain tones)

Built-in Tones

CTK-4000: 570

CTK-5000: 670

Sampling Tones

Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*

Up to 10 seconds

Functions

Layer, Split

1 to 10, Off

1 to 5, Off

Reverb

Chorus

Metronome

Beats per Measure

Tempo Range

Song Bank

0, 2 to 6

30 to 255

Built-in Songs

User Songs

152

Up to 10*

Step Up Lesson

Lessons

4 (Listen, Watch, Remember, Auto)

Lesson Part

L, R, LR

Functions

Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation

20 notes

Music Challenge

Auto Accompaniment

Built-in Rhythms

CTK-4000: 180

CTK-5000: 200

User Rhythms

Registration

Recorder

Up to 10 (Accompaniment Edit)*

32 (4 setups × 8 banks)

Real-time recording, playback

5 songs, 6 tracks

Keyboard Play

Playing Along with a

Built-in Songs

1 song (L, R, LR)

Memory Capacity

Other Functions

Transpose

Approximately 12,000 notes (total for 6 songs)

1 octaves (–12 to +12 semitones)

Octave Shift

Upper/Lower 2 octaves

Tuning

A4 = approx. 440 Hz 100 cents

Scale Tuning

Music Preset

One Touch Preset

Scale Fine Tune (CTK-5000 only), Quarter Tone (CTK-5000 only), Preset Scales

305

CTK-4000: 180

CTK-5000: 200

Auto Harmonize

Arpeggiator

12 types

90 types

MIDI

16 multi-timbre received, GM Level 1 standard

Musical Information Function

Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation,

tempo, measure and beat number, chord name, etc.

Pitch Bend Wheel (CTK-5000 only)

Pitch Bend Range

0 to 12 semitones

SD Memory Cards (CTK-5000 only)

Supported SD Memory Cards

Functions

2GB or less

SMF playback, file storage, file recall, file delete, card format

E-72

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Inputs/Outputs

USB port

TYPE B

Sustain/Assignable jack

Standard jack (sustain, sostenuto, soft, rhythm start/stop)

Phones/Output jack (CTK-4000) Stereo standard jack

Output Impedance: 200Ω, Output Voltage: 4.5V (RMS) MAX

Stereo standard jack

Phones jack (CTK-5000)

Line Out R, L/MONO jacks

(CTK-5000 only)

Standard jack × 2

Output Impedance: 2.3kΩ, Output Voltage: 1.5V (RMS) MAX

Audio In jack

Stereo mini jack

Input Impedance: 9kΩ, Input Sensitivity: 200mV

Power Jack

CTK-4000: 9V DC

CTK-5000: 12V DC

Power Supply

Batteries

2-way

6 D-size zinc-carbon batteries or alkaline batteries

Battery Life

CTK-4000: Approximately 5 hours continuous operation on zinc-carbon batteries

CTK-5000: Approximately 4 hours continuous operation on alkaline batteries

AC Adaptor

CTK-4000: AD-5

CTK-5000: AD-12

Auto Power Off

Approximately 6 minutes after last key operation (Operates during battery use only)

Speakers

CTK-4000: 12cm × 2 (Output: 2.5W + 2.5W)

CTK-5000: 12cm × 2 + 3cm × 2 (Output: 6.0W + 6.0W)

Power Consumption

CTK-4000: 9V = 7.7W

CTK-5000: 12V = 18W

Dimensions

Weight

95.0 × 37.6 × 13.0 cm (37 ⁷/16 × 14 ¹³/16 × 5 ¹/8 inch)

CTK-4000: Approximately 4.6kg (10.1 lbs) (without batteries)

CTK-5000: Approximately 5.4kg (11.9 lbs) (without batteries)

• Design and specifications are subject to change without notice.

* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).

Operating Precautions

Be sure to read and observe the following operating precautions.

■ Location

Avoid the following locations for this product.

• Areas exposed to direct sunlight and high humidity

• Areas subjected to temperature extremes

• Near a radio, TV, video deck, or tuner

The above devices will not cause malfunction of the product, but interference from the product can cause audio or video

interference of a nearby device.

■ User Maintenance

• Never use benzene, alcohol, thinner, or other chemical agents to clean the product.

• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.

Wring all excess moisture from the cloth before wiping.

■ Included and Optional Accessories

Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric

shock, and personal injury.

■ Weld Lines

Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not

cracks or scratches.

■ Musical Instrument Etiquette

Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the

volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using

headphones.

E-73

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Error Messages

Display

Message

Cause

Action

Err CardFull

There is not enough room available on the SD

memory card.

• Delete some of the files on the SD memory card to

make room for new data (page E-63).

• Use a different SD memory card.

Err Card R/W The SD memory card is damaged.

Use a different SD memory card.

Err Convert

There is not enough unused memory available to

Delete some or all of the following user data from

save recorded song data to an SD memory card as an memory to make room for new data.

SMF 0 format file.

Sampled sounds (page E-17), user rhythms (page

E-42), user songs (page E-28)

Err Exist

A sampled drum set sound cannot be copied (page

E-21) to a keyboard key because the key already has

a sampled sound assigned to it.

• Delete the sampled sound that is currently assigned

to the key you are copying to (page E-22).

• Copy the sampled sound to another key that does not

yet have a sampled sound assigned to it.

Err Format

Err Limit

1. The format of the SD memory card is not

compatible with this Digital Keyboard.

1. Format the SD memory card (page E-60).

2. The SD memory card is damaged.

2. Use a different SD memory card.

The tone number you selected before starting

sampling already has the allowable maximum of eight

sampled sounds assigned to it.

• Delete the one or more of the sampled sounds

currently assigned to the tone number (page E-22).

• Select another tone number that has less than eight

sampled sounds currently assigned to it (page E-20).

Err Mem Full 1. There is not enough memory available to play back Delete some or all of the following user data from

song data from an SD memory card.

memory to make room for new data.

Sampled sounds (page E-17), user rhythms (page

E-42), user songs (page E-28)

2. There is not enough memory available for sampling

or Auto Accompaniment editing.

Err No Card

1. The SD memory card is not set correctly in the card 1. Remove the memory card and reinsert it correctly

slot.

(page E-60).

2. The SD memory card was removed part way

through a card access operation.

2. Never remove a SD memory card from the card slot

while a card access operation is in progress.

Err No Data

Err No File

There is no data in the selected user area (tone,

rhythm, song number, etc.)

Select a Digital Keyboard user area that contains data.

There is no folder named “MUSICDAT” on the SD

memory card.

• Use a computer to create a folder named

“MUSICDAT” on the SD memory card (page E-62).

• Format the SD memory card on the Digital Keyboard

(page E-60).

Err NotSMF01 You are attempting to play back SMF Format 2 song Playback of SMF Format 0 or 1 only is supported.

data.

Err Protect

1. The SD memory card is write protected.

2. Sampled sounds are protected.

1. Adjust the SD memory card’s write protect switch to

enable data storage.

2. Unprotect one or more of the sampled sounds, which

will allow it to be overwritten or deleted.

Err ReadOnly You are attempting to save a file using the same

• Save the new file to a different card or use another

name.

name as an existing read-only file.

• Remove the read-only attribute of the exiting file on

the SD memory card and try again.

• Use a different SD memory card.

Err SizeOver 1. The song data on the SD memory it too big to play 1. This Digital Keyboard can play back song data files

back. with a maximum size of about 320Kbytes.

2. Auto Accompaniment editing cannot be performed 2. Select a different accompaniment pattern or

because the accompaniment pattern or instrument

part data is too large.

instrument parts.

Err WrongDat 1. The data on the SD memory card is corrupted.

—

2. The data on the SD memory card is a type that is

not supported by this Digital Keyboard.

E-74

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Song List

SONG BANK

WORLD

055

056

057

058

059

060

061

062

063

064

065

066

067

068

069

070

071

072

073

074

075

076

077

078

HEIDENRÖSLEIN

AIR FROM “SUITE no.3”

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

022

023

024

025

026

027

028

TWINKLE TWINKLE LITTLE STAR

LIGHTLY ROW

LONG LONG AGO

ON TOP OF OLD SMOKEY

SAKURA SAKURA

WHEN THE SAINTS GO MARCHING IN

AMAZING GRACE

AULD LANG SYNE

SPRING FROM “THE FOUR SEASONS”

HABANERA FROM “CARMEN”

BRINDISI FROM “LA TRAVIATA”

HUNGARIAN DANCES no.5

MINUET IN G MAJOR

MUSETTE IN D MAJOR

GAVOTTE (GOSSEC)

ARABESQUE (BURGMÜLLER)

CHOPSTICKS

DECK THE HALL

COME BIRDS

DID YOU EVER SEE A LASSIE?

MICHAEL ROW THE BOAT ASHORE

DANNY BOY

MY BONNIE

HOME SWEET HOME

AURA LEE

HOME ON THE RANGE

ALOHA OE

SANTA LUCIA

FURUSATO

GREENSLEEVES

ODE TO JOY

AVE MARIA (GOUNOD)

SONATINA op.36 no.1 1st Mov.

PRELUDE op.28 no.7 (CHOPIN)

RÊVERIE

GYMNOPÉDIES no.1

GOING HOME FROM “FROM THE NEW WORLD”

FÜR ELISE

TURKISH MARCH (MOZART)

SONATA op.27 no.2 “MOONLIGHT” 1st Mov.

ETUDE op.10 no.3 “CHANSON DE L’ADIEU”

THE ENTERTAINER

JOSHUA FOUGHT THE BATTLE OF JERICHO

THE MUFFIN MAN

LONDON BRIDGE

UNDER THE SPREADING CHESTNUT TREE

SIPPIN’ CIDER THROUGH A STRAW

GRANDFATHER’S CLOCK

ANNIE LAURIE

BEAUTIFUL DREAMER

IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR

HANDS

MY DARLING CLEMENTINE

LITTLE BROWN JUG

HOUSE OF THE RISING SUN

SHE WORE A YELLOW RIBBON

YANKEE DOODLE

MY OLD KENTUCKY HOME

SZLA DZIEWECZKA

TROIKA

WEDDING MARCH FROM “MIDSUMMER NIGHT’S

DREAM”

AMERICAN PATROL

FRÖHLICHER LANDMANN

LA CHEVALERESQUE

SONATA K.545 1st Mov.

079

080

081

082

083

084

085

086

087

088

089

090

091

092

093

094

095

096

097

098

099

100

029

LA PRIÈRE D’UNE VIERGE

VALSE op.64 no.1 “PETIT CHIEN”

LIEBESTRÄUME no.3

JESUS BLEIBET MEINE FREUDE

CANON (PACHELBEL)

SERENADE FROM “EINE KLEINE NACHTMUSIK”

MARCH FROM “THE NUTCRACKER”

INVENTIONEN no.1

PRAELUDIUM no.1 (J.S.BACH)

SONATINE op.20 no.1 1st Mov.

HUMORESKE (DVO ÁK)

DOLLY’S DREAMING AND AWAKENING

LA FILLE AUX CHEVEUX DE LIN

ARABESQUE no.1 (DEBUSSY)

TRÄUMEREI

030

031

032

033

034

035

036

037

038

039

040

041

042

043

044

045

WALTZING MATILDA

ON THE BRIDGE OF AVIGNON

I’VE BEEN WORKING ON THE RAILROAD

OH! SUSANNA

CAMPTOWN RACES

JEANNIE WITH THE LIGHT BROWN HAIR

TURKEY IN THE STRAW

JAMAICA FAREWELL

MAPLE LEAF RAG

NOCTURNE op.9 no.2 (CHOPIN)

EXERCISE

EVENT

046

047

048

049

050

SILENT NIGHT

WE WISH YOU A MERRY CHRISTMAS

JINGLE BELLS

JOY TO THE WORLD

O CHRISTMAS TREE

101 - 150 EXERCISE I / II / III

DEMO TUNES

151 - 152 DEMO TUNES

USER SONGS

153 - 162 USER SONGS

PIANO/CLASSICS

051

052

053

054

MARY HAD A LITTLE LAMB

LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”

JE TE VEUX

SONATA op.13 “PATHÉTIQUE” 2nd Mov.

E-75

Download from Www.Somanuals.com. All Manuals Search And Download.

This recycle mark indicates that the packaging conforms to

the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se

ajusta a la legislación de protección ambiental en Alemania.

MA0811-B Printed in China

CTK4000/5000ES1B

Download from Www.Somanuals.com. All Manuals Search And Download.

Beko Washer WI 1382 User Manual
Belkin Modem F5D5730au User Manual
Black Box Network Cables locking pin for taa compliant 3 series patch cables User Manual
Bolens Lawn Mower 188 421 000 User Manual
Bosch Appliances Electric Cookie Press HBA 23B10 S User Manual
Campbell Hausfeld Microcassette Recorder DG460300CK S User Manual
Canon Camera Lens 8806A002 User Manual
Carrier Access Network Router Access Navigator User Manual
Casio Clock TQ 131U User Manual
Casio Printer CW L300 User Manual