E
PROGRAM-LINK™
FA-124
User’s Guide
CASIO Worldwide Education Website
CASIO EDUCATIONAL FORUM
RJA510188-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
• You can use FA-124 to develop programs using the same commands as those available on an
fx-9860G Series calculator. You can store your programs on your computer, and use the FA-124’s
data communication functions to transfer them to your fx-9860G Series calculator when you need
them.
• Once you establish a link with your computer over the USB cable that comes bundled with your
fx-9860G Series calculator, you can use easy-to-understand Microsoft Explorer-like operations to
transfer data (programs and variable data) between them.
• You can transfer data by putting your fx-9860G Series calculator into its communication standby
state and then performing all operations on your connected computer.
• FA-124 provides the following capabilities.
·
·
·
Transfer of data between your fx-9860G Series calculator and computer
fx-9860G Series calculator data storage
Data transfer between your computer and a CASIO ALGEBRA FX Series or fx-7400/
CFX-9850 Series graphic scientific calculator
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Conventions
• The terms “FA-124” and “this software” as used in this manual refer to the FA-124 software.
• The term “calculator” as used in this manual refers to your CASIO Graphic Scientific Calculator.
• This manual explains only the procedures required to operate the FA-124 application software. It
assumes that you are already familiar with the following computer operations.
• Pull-down menu operations, clicking, double-clicking, and dragging with the mouse
• Text input using the keyboard
• Icon and window operations
See the documentation that comes with your computer for full details on these operations.
• What actually appears on the display of your computer may differ somewhat if you are using a
different operating system.
• Menu operations are notated within the text of this manual as hyphenated commands with the
menu hierarchy progressing from left to right.
Example: Selecting the Open command from the File menu would be described as:
Select [File] - [Open].
Menu
• Any operation in this manual that is specifically identified as neither a computer nor calculator
operation should be assumed to be a computer operation. All calculator operations are
specifically identified as such.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
CASIO Graphic Scientific Models
This software is designed for use with the following CASIO Graphic Scientific models.
• fx-9860G Series
fx-9860G SD
fx-9860G
fx-9860G Slim
fx-9860G AU
• ALGEBRA FX Series
ALGEBRA FX 2.0
ALGEBRA FX 2.0 PLUS
FX 1.0
FX 1.0 PLUS
• CFX-9850 Series
CFX-9850G
fx-9750G
CFX-9950G
CFX-9970G
CFX-9850G PLUS
CFX-9850Ga PLUS
CFX-9850GB PLUS
CFX-9950GB PLUS
CFX-9850GC PLUS
• fx-7400 Series
fx-7450G
fx-7400G PLUS
In addition, the following CASIO Graphic Scientific models can exchange data with the above
models.
fx-7700GB
fx-8700GB
fx-7700GE
fx-7700GH
fx-9700GE
fx-9700GH
CFX-9800G
* All of the fx-9860G Series calculator operations shown in this manual are performed using the
fx-9860G SD/fx-9860G.
Important!
• Be sure to install the FA-124 before you connect the fx-9860G Series calculator to your computer.
Connecting before you install the FA-124 can result in improper operation.
Note
• Use only the USB cable that comes with fx-9860G Series calculator whenever connecting
your fx-9860G Series calculator to a computer to exchange data between them. Data
exchange with FA-124 will not be possible if you use a commercially available serial cable.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
Operating Systems: Windows® 98 SE, Windows® Me, Windows® 2000, Windows® XP,
Windows Vista™
* Operation on a computer running Windows® XP Professional x64 Edition is
not supported.
* For Windows Vista™, operation is supported for the 32-bit version only.
The 64-bit version is not supported.
Computer:
Computer with one of the Windows® operating systems pre-installed
(Excluding computers with an upgraded operating system and self-built
computers.)
Account Type:
Installation on Windows® 2000, Windows® XP, and Windows Vista™ requires
administrator privileges.
CPU:
Disk Space:
Memory:
Intel® Pentium® III 500 MHz or higher recommended
50 MB for installation and uninstall
RAM to support version of Windows® being used.
Does not include memory required for operating system.
USB port for direct connection. Do not connect via a USB hub.
Video adapter and monitor must support resolution of XGA (1024×768) or
higher, 16-bit or higher system color.
Other:
Internet Explorer 6.0 or later.
CD-ROM drive.
Adobe Reader 6.0 or later.
Note
• Windows is a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
• Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.
• Company and product names used herein are trademarks of their respective owners.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Installing the Software ............................................................................ E-6
Installing ............................................................................................................................E-6
Uninstalling ...................................................................................................................... E-11
2. Connecting the Calculator to Your Computer..................................... E-12
3. fx-9860G SD/fx-9860G–Computer Data Transfer ............................... E-15
Toolbar Buttons and Icons ...............................................................................................E-16
Menu Commands and Icons ...........................................................................................E-18
Transferring Files from the fx-9860G SD/fx-9860G to Your PC ......................................E-22
fx-9860G SD/fx-9860G Operation ...................................................................................E-22
Using FA-124 ..................................................................................................................E-23
Batch Transferring Files ..................................................................................................E-31
Adding a Flash Image or Memory Image ........................................................................E-32
Exporting Flash Images and Memory Images .................................................................E-33
Importing a Flash Image or Memory Image ....................................................................E-34
Importing a File................................................................................................................E-35
4. Data Transfer between a Computer and ALGEBRA FX Series or
fx-7400/CFX-9850 Series ....................................................................... E-37
File Configuration ............................................................................................................E-37
File Transfer ....................................................................................................................E-38
Back-up Data Transfer ....................................................................................................E-41
5. Data Editing............................................................................................ E-42
Creating a New Catalog File (ALGEBRA FX, CFX-9850, fx-7400 Series only) ..............E-42
Creating a New Item (Program) ......................................................................................E-42
Displaying, Editing, and Printing Items ............................................................................E-43
Deleting, Copying, and Moving Groups and Items ..........................................................E-44
6. Data Conversion .................................................................................... E-45
7. Screen Capture ...................................................................................... E-50
Capturing a Screen to Your Computer ............................................................................E-50
Displaying and Printing a Captured Screen Image .........................................................E-52
8. Program Editor ...................................................................................... E-53
Launching the Program Editor ........................................................................................E-53
Saving Programs .............................................................................................................E-53
9. Data Transfer with an Old Model Calculator ....................................... E-54
10. Installing an Add-in .............................................................................. E-56
11. Optimizing the Storage Memory or Flash Image .............................. E-58
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
Installing
Use the procedures in this section to install the FA-124.
It is strongly recommended that you exit all Windows Programs before running the Install Wizard.
k To install FA-124
1. Open the [FA-124] folder.
2. Double-click “CASIO FA-124” or “CASIO FA-124.exe”.
• This displays a language selection menu.
• The option you select here specifies the language of the screen text that appears during
installation. The screen text language of the FA-124 application itself is English, regardless of
what you select here.
• The setting you select here will determine the language version for installation of the FA-124
manual.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
3. Select a language and then click the [OK] button.
4. Click the [Next] button.
• This displays the end user license agreement (EULA).
• Selecting English, French, or German in step 3 above will cause the EULA to appear in the
selected language. Selecting any other language will display the English EULA.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
5. Carefully read the EULA.
6. If you agree to be bound by the terms and conditions of the EULA, choose “I accept the
terms...”, and then click [Next].
• If you do not want to agree, choose “I do not accept the terms...” and then click [Cancel] to
exit the installation operation.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
7. Perform either of the two following steps to specify the installation drive and folder.
• To use the default settings
Simply click the [Next] button.
• To specify a different folder
Click the [Change…] button. Select the folder you want and then click [Next].
8. Click the [Install] button to start the installation.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
• If your computer is running Windows Vista™
a. The dialog box shown below will appear when installation starts. Click “Allow”.
b. The dialog box shown below will appear if the USB driver is not installed on your
computer. Click the [Install] button.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installing the Software
9. When a message appears telling you that installation is complete, click the [Finish] button.
• This finalizes installation of the software on your computer.
Important!
If the message shown below appears during installation, re-start you computer. Installation will
re-start when your computer starts up again.
Uninstalling
Perform the following steps if you ever need to remove FA-124 from your computer.
k To uninstall
1. Display the Windows Control Panel.
2. Click [Add/Remove Programs].
3. In the list of applications on the dialog box that appears, select “CASIO FA-124”.
4. Click the [Add/Remove] button to start a program maintenance wizard.
5. Click the [Yes] button.
• This completes the uninstall procedure.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connecting the Calculator to Your Computer
k To connect your fx-9860G SD/fx-9860G to a computer
Important!
• Be sure to install the FA-124 before you connect the fx-9860G SD/fx-9860G to your computer.
Connecting before you install the FA-124 can result in improper operation.
1. Use the USB cable that comes with your fx-9860G SD/fx-9860G to connect to the computer.
2. Connect the USB cable to your fx-9860G SD/fx-9860G.
• This will automatically cause your fx-9860G SD/fx-9860G to turn on and enter data
communication standby.
• If your fx-9860G SD/fx-9860G does not enter communication standby at this time, perform the
steps under “To set up your fx-9860G SD/fx-9860G for data communication” on page E-22.
Attention Windows® XP Users
• See page E-13 after performing the above two steps.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connecting the Calculator to Your Computer
u Windows® XP Users
After installing the FA-124, perform the following steps to install the USB driver on your computer.
1. Connecting fx-9860G SD/fx-9860G to a computer running Windows® XP causes the screen
shown below to appear on your computer display.
Select “No, not this
time”.
(Windows® XP SP2 only)
2. Select “Install the software automatically (Recommended)” and then click [Next].
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connecting the Calculator to Your Computer
3. Though a message appears to let you know that the software has not passed the “Windows
Logo Test”, there is no need for concern. Simply click [Continue Anyway] and proceed with
installation.
4. Click [Finish].
k To connect an ALGEBRA FX Series or fx-7400/CFX-9850 Series calculator to
your computer
Note
• Be sure to use the SB-88 cable that comes with the FA-123 USB to connect an ALGEBRA FX
Series or fx-7400/CFX-9850 Series calculator to a computer. Do not use the cable that comes
with the FA-124.
1. Use the data transfer cable (SB-88) to connect the calculator to one of the computer’s serial
ports (COM1 to COM9).
2. Connect the data transfer cable to the calculator.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
1. On your computer’s desktop, double-click “FA-124”.
• This starts up FA-124.
2. Select [Tool] - [Model Type] - [fx-9860].
• This identifies the fx-9860G SD/fx-9860G as the connected graphic scientific calculator.
3. Select [Link] - [Communications].
• This displays the port selection dialog box.
4. Select “USB” and then click [OK].
• This specifies that the calculator is connected to the computer’s USB port.
5. On FA-124, perform the data exchange and management tasks you want.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Toolbar Buttons and Icons
The following describes FA-124 toolbar buttons and icons.
— Establishes a connection between your fx-9860G SD/fx-9860G and FA-124.
— Disconnects your fx-9860G SD/fx-9860G from the FA-124.
— Copies the currently selected folder(s) or file(s).
— Pastes copied folder(s) or file(s).
— Deletes the currently selected image(s), folder(s) or file(s).
— Creates a new folder.
— Displays variables stored in memory.
— Displays folders and files currently in storage memory.
— Transfers all fx-9860G SD/fx-9860G data to the image specified on the computer window.
— Transfers all files in the flash image or memory image selected on the computer window to
the fx-9860G SD/fx-9860G.
— Captures the fx-9860G SD/fx-9860G screen.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
— Icon for folders and files in the flash image.
— Icon for data groups and files in the memory image.
— Icon for a folder.
— Icon for files or variables.
— Data group icon.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Menu Commands and Icons
The following describes the shortcut menus that appear when you right-click with the mouse.
k Right-clicking
[User Name] (fx-9860)
• Collapse/Expand — Collapses/expands data groups.
• Copy — Copies the currently selected data group(s), folder(s) or file(s).
• Paste — Pastes copied data group(s), folder(s) or file(s).
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
k Right-clicking
(fx-9860)
• Collapse/Expand — Collapses/expands data groups.
• Copy — Copies the currently selected data group(s), folder(s) or file(s).
• Paste — Pastes copied data group(s), folder(s) or file(s).
k Right-clicking
(Computer)
• Export to fx-9860 File — Exports the files in the selected folder to an external file.
• Import fx-9860 File — Imports an external file to an image.
• Copy — Copies the currently selected folder.
• Paste — Pastes copied file.
• Delete — Deletes the currently selected folder.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
k Right-clicking
(fx-9860)
• Copy — Copies the currently selected file.
• Paste — Pastes copied file.
k Right-clicking
(Computer)
• Export to fx-9860 File — Exports the selected file to an external file.
• Import fx-9860 File — Imports an external file to an image.
• Copy — Copies the currently selected file.
• Paste — Pastes copied file.
• Delete — Deletes the currently selected file.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
k Right-clicking
Computer
• Expand/Collapse — Expands/Collapses the currently selected flash or memory image.
• Add New Image — Adds a new image.
• Insert Existing Image — Inserts an existing image.
k Right-clicking
or
• Expand/Collapse — Expands/Collapses the folder tree.
• Export to fx-9860 File — Exports the selected image to an external file.
• Import fx-9860 File — Imports an external file to an image.
• Remove Image — Removes the currently selected image.
• Optimization — Optimizes the storage memory or flash image.
• Create New Folder — Creates a new folder. (Storage momory only)
• Copy — Copies the currently selected flash or memory image.
• Paste — Pastes a previously copied data group.
• Delete — Deletes the currently selected flash or memory image.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Transferring Files from the fx-9860G SD/fx-9860G to Your PC
First set up your fx-9860G SD/fx-9860G for data communication, and then perform the transfer
operation on your computer using FA-124.
fx-9860G SD/fx-9860G Operation
Use the following procedure to put your fx-9860G SD/fx-9860G into a standby state for data
communication.
k To set up your fx-9860G SD/fx-9860G for data communication
1. From the Main Menu, enter the LINK mode.
2. Specify USB as the cable type.
4(CABL)1(USB)
3. Turn on Wakeup.
5(WAKE)1(ON)
4. Turn off the calculator.
5. Connect the USB cable.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Using FA-124
The following procedures explain how to perform various data transfer and other operations using
FA-124.
k To establish a connection between your fx-9860G SD/fx-9860G and FA-124
1. After setting up your fx-9860G SD/fx-9860G for data communication (page E-12), start up the
FA-124.
• This displays the fx-9860 window on the left, and the computer window on the right.
2. Click the
(Connect) button on the fx-9860 toolbar. (PC)
• At this time, your fx-9860G SD/fx-9860G screen will show this.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
3. After the connection is established, the fx-9860 window will show data groups and data, while
the computer window will show flash images and memory images.
• On the computer window toolbar, click
memory data.
to display main memory data, or
for storage
• Double-clicking a data group on the fx-9860 window will display the data contained in the data
group.
• Double-clicking a flash image or memory image on the computer window will the display its
data group. Double-clicking a data group will display the files contained in the data group.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
• See the following for information about the various data transfer operations you can perform
after establishing a connection.
k To transfer a data group from the fx-9860G SD/fx-9860G to a computer
1. Start up FA-124 and establish a connection with your fx-9860G SD/fx-9860G.
2. On the fx-9860 window, select the data group you want to transfer.
• To select multiple data groups, hold down the computer keyboard’s [Ctrl] key as you click
each one.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
3. Use your mouse to drag the selected data group to the computer window memory image to
transfer it.
4. If you want to transfer other data groups, repeat steps 2 and 3.
5. After you are finished, terminate the connection between your fx-9860G SD/fx-9860G and
computer.
k To transfer folders from the fx-9860G SD/fx-9860G to a computer
1. Start up FA-124 and establish a connection with your fx-9860G SD/fx-9860G.
2. On the fx-9860 window, double-click the data group to expand it.
3. Select the data you want to transfer.
• To select multiple data items, hold down the computer keyboard’s [Ctrl] key as you click each one.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
4. Use your mouse to drag the selected data to the computer window memory image to transfer it.
• This will create the data group associated with the data in the memory image and store the
data inside the data group.
5. If you want to transfer more data, repeat steps 2 and 4.
6. After you are finished, terminate the connection between your fx-9860G SD/fx-9860G and
computer.
k To transfer a file from a computer to the fx-9860G SD/fx-9860G
1. Start up FA-124 and establish a connection with your fx-9860G SD/fx-9860G.
2. On the computer window, double-click the memory image to expand it.
3. Double-click the data group to expand it.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
4. Select the file you want to transfer.
• To select multiple files, hold down the computer keyboard’s [Ctrl] key as you click each one.
5. Use your mouse to drag the selected file to the fx-9860 window icon to transfer it.
• You can also transfer a single data group by dragging it to the fx-9860 window.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
6. If you want to transfer other files, repeat steps 3 and 5.
7. After you are finished, terminate the connection between your fx-9860G SD/fx-9860G and
computer.
k To create a new folder
1. On the fx-9860 window (storage memory only) or the computer window, click the tool bar
button.
2. Click the
(New Folder) button.
3. On the dialog box that appears, type in the name you want to assign to the new folder
(“FOLDER” for this example) and then click [OK].
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
k To delete a flash or memory image, folder, or file
1. On the computer window, select the flash image, memory image, folder, or file you want to
delete.
2. On the computer window, click the toolbar
(Delete) button.
3. On the confirmation dialog box that appears, click [OK] to delete or [Cancel] to cancel.
k To terminate the connection between your fx-9860G SD/fx-9860G and FA-124
1. After data transfer is complete, click
(Disconnect) on the fx-9860 window toolbar.
Your computer screen will show this.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Batch Transferring Files
You can use the data backup feature to transfer all fx-9860G SD/fx-9860G data to a computer for
backup. You can later transfer the data back to the fx-9860G SD/fx-9860G when required.
k fx-9860G SD/fx-9860G → Computer
1. Connect the fx-9860G SD/fx-9860G unit to your computer.
2. On the fx-9860 window, click
fx-9860.
3. On the computer window, click the transfer destination image icon.
4. On the fx-9860 window toolbar, click the
button to backup all fx-9860G SD/fx-9860G data
to the specified image.
k Computer → fx-9860G SD/fx-9860G
1. Connect the fx-9860G SD/fx-9860G unit to your computer.
2. On the computer window, click the image icon of the data you want to transfer.
3. On the fx-9860 window, click
fx-9860.
4. On the computer window toolbar, click the
button to transfer all files in the specified image
to the fx-9860G SD/fx-9860G.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Adding a Flash Image or Memory Image
Use the procedure below when you want to add a flash image or memory image to the computer
window. The following procedure shows how to add a flash image. The procedure for adding a
memory image is virtually identical.
1. On the computer window, click the toolbar
button.
2. Right-click [Computer], and then select [Add New Image] from the shortcut menu that appears.
3. Type in the name you want to assign to the image, and then click [OK].
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
Exporting Flash Images and Memory Images
A flash image or memory image can be saved to a file (fx-9860 data file), and then stored on a
computer’s hard disk.
1. On the computer window, click the image you want to export.
2. Right-click with the mouse.
3. On the shortcut menu that appears, select [Export to fx-9860 File].
• Flash image: The dialog box shown below appears. Select the save destination directory, and
then click [OK]. The file is saved using the same name as the flash image.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
• Memory image: The dialog box shown below appears. Type in the file name, and then click
[Save].
Importing a Flash Image or Memory Image
Use the FA-124 to import a flash image or memory image stored in a file on a computer’s hard disk.
1. Right-click with your mouse.
2. On the shortcut menu that appears, select [Insert Existing Image].
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
3. On the file dialog box that appears, select the image you want to import, and then click [Open].
• This imports the image to the computer window and displays in.
Importing a File
Use this procedure to import a file from a computer hard disk. Importing a file adds its data to the
flash image or memory image.
1. On the computer window, select the destination flash image or memory image.
2. Right-click with your mouse.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
3. fx-9860G SD/fx-9860G–Computer Data Transfer
3. On the shortcut menu that appears, select [Import fx-9860 File].
4. On the file dialog box, select the file you want to import, and then click [Open].
• This will add the imported file data to the flash image or memory image.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Data Transfer between a Computer and
ALGEBRA FX Series or fx-7400/CFX-9850
Series
File Configuration
FA-124 files are called “catalog files,” which can be one of three different types.
Catalog Files
Text files
Back-up file
Image files
uText files
This type of file consists of two parts: a group and the multiple items stored under it. Except for
graphic data, all items can be displayed on a computer screen, and programs can be edited on the
computer.
ALGEBRA FX CFX-9850/fx-7400
CSV
(A)-(B)
Group
Program
Matrix
List
List File
Y=Data
Item
Display
Editing
Series (A)
Series (B)
Conversion Conversion
Program name
MatA - MatZ
List1 - List20
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES(1-6)
YES
YES
YES
YES
NO
YES
YES
YES
YES(1-6)
YES
YES(1-6)
YES
YES
YES
YES
YES(1-6)
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
NO
NO
YES
YES
YES
YES
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
NO
NO
NO
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
NO
NO
NO
NO
NO
File1 - File6
Graph Function
Recursion Function
V-Window
RightV-Window
Graph Factor
Table Range
Recursion Range
G-Mem1 - G-Mem20
V-Win1 - V-Win6
Pict1 - Pict20
Graph Memory
V-Window Mem
Picture
DynaMem
Equation
Simul Equation
Poly Equation
Alpha Memory (A - Z,r, )
F-Mem n
CAS (A - Z,r, )
Algebra
f1 - f20
ANS
NO
NO
NO
NO
NO
NO
NO
NO
Input Replay
Output Replay
Equation
Data from an older model CASIO Graphic Scientific Calculator is converted to CFX-9850/fx-7400 Series format data.
uBack-up file
This file contains the data produced when you back up all of the data in calculator memory.
uImage files
This type of file contains the data produced when you use the screen capture function to create a
bit pattern of the screen and save the bit pattern to your computer. Image data is saved as a bmp
format file.
Note
• Graphic files saved as the above file format cannot be opened using FA-124.
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Data Transfer between a Computer and ALGEBRA FX Series or fx-7400/CFX-9850 Series
File Transfer
The procedures described here can be used to upload calculator data to your computer, and to
download programs and data from your computer to your calculator.
Note
• For details on how to operate your calculator during file transfers, see the section of the
calculator’s User’s Guide titled “Data Communications.”
k Types of transfers
There are two ways to transfer items.
• Transfer of a single data item. Transferred data items can be individually opened and manipulated
in the catalog window, and programs can be edited on the computer.
• Transfer of all data to back up computer memory contents. Backed up data contents cannot be
viewed or edited on the computer.
k Before transferring data
uTo connect the calculator to your computer
1. Use the data transfer cable (SB-88) to connect the calculator to one of the computer’s serial
ports (COM1 to COM9).
2. Connect the data transfer cable to the calculator.
uTo specify the connected calculator type
1. On the FA-124 Tool menu, select [Model Type].
• This will display a submenu of graphic scientific calculator names.
2. Select the name of the calculator you connected to your computer.
Note
• Starting up FA-124 will display the window for the currently selected graphic scientific calculator.
uTo switch the communication port
1. On the FA-124 Link menu, select [Communications].
• This will display the port selection dialog box.
2. Select the port where the calculator is connected (COM1 to COM9).
3. Click [OK].
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Data Transfer between a Computer and ALGEBRA FX Series or fx-7400/CFX-9850 Series
k Transferring files from your calculator to your computer
1. Select [Link] - [Receive] on the computer screen.
2. Select the calculator data you want and then send it.
Example: Use the following procedure to send data from the ALGEBRA FX.
Select [Transmit] in the LINK mode.
Select [Select] and then select the data item you want to sent.
Select [Trans] and then select [Yes].
Data transfer starts at this time, with its progress indicated by a dialog box on the computer
screen.
Sample screen
Note
• The message “Transmit ERROR” appears if the computer is not set up to receive data.
3. When data transfer is complete, a new catalog window appears on the screen.
Sample screen
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Data Transfer between a Computer and ALGEBRA FX Series or fx-7400/CFX-9850 Series
4. Save the data as a file.
Select [File] - [Save].
Specify a file name and click [OK] to save it as a catalog file.
Note
• Selecting [File] - [Save] displays a dialog box you can use to specify the file name, drive, and
directory. You can also use the “Save type” box to specify the file format.
• Double check the following items whenever data transfer is not performed correctly.
• Check for proper connection of the communication cable.
• Check that the port was correctly selected using [Link] - [Communications].
• Make sure the correct [Tool] - [Model Type] is selected.
k Transferring files from your computer to your calculator
1. Select [File] - [Open] and open the catalog file that you want to use for the transfer.
Note
• Selecting [File] - [Open] causes a dialog box to appear. This dialog box can be used to specify
a file name and also to specify a drive and directory.
2. Click on a group and item to select it for transfer.
• To select all the contents of the catalog file, select [Edit] - [Select All].
• To select all the items in a group, double-click on the group.
• To select multiple groups and items, hold down the computer keyboard’s [Ctrl] key and click.
Hold down the [Shift] key while clicking on groups or items to select them.
3. Set up the calculator to receive data.
Example: Use the following procedure to receive data with the ALGEBRA FX.
Select [Receive] in the LINK mode.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Data Transfer between a Computer and ALGEBRA FX Series or fx-7400/CFX-9850 Series
4. Select [Link] - [Transmit].
• Double check to make sure that both units are set up correctly for data transfer and then click
[OK].
• Data transfer starts at this time, with its progress indicated by a dialog box on the computer
screen.
5. If a received file has a name of a file already stored in calculator memory, a dialog box appears
asking if you want to overwrite the existing file. Select [Yes] or [No] in response to the dialog
message.
Note
• The message “Transmit ERROR” appears if the calculator is not set up to receive data.
6. When data transfer is complete, the dialog box closes.
Note
• Double check the following items whenever data transfer is not performed correctly.
• Check for proper connection of the communication cable.
• Check that the port was correctly selected using [Link] - [Communications].
• Make sure the correct [Tool] - [Model Type] is selected.
Back-up Data Transfer
k To back up calculator data
1. Select [Link] - [Receive] on the computer screen.
2. Select [Backup] in the calculator’s LINK mode.
Example: Use the following procedure to back up data from the ALGEBRA FX.
Select [Transmit] in the LINK mode.
Select [Backup] and then select [Yes].
3. Now proceed with step 3 under “Transferring files from your calculator to your computer”.
k To transfer backed up data to the calculator
1. Select [File] - [Open] and then select the back-up data file.
2. Now proceed with step 3 under “Transferring files from your computer to your calculator”.
Note
• In the case of back-up data, no confirmation message appears to ask if you want to replace
previously backed up data with new data if you assign a file name that is already assigned to
back up data in memory.
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Data Editing
Creating a New Catalog File (ALGEBRA FX, CFX-9850, fx-7400 Series
only)
1. Select [File] - [New] - [Model Type], and then on the sending unit select [Model Type].
Sample screen
2. Input data to create a new program or copy (or move) data from another catalog window.
• For details on creating a program, see “Creating a New Item (Program)”.
• For details on copying or moving data, see “Deleting, Copying, and Moving Groups and
Items”.
3. Select [File] - [Save As] to save the data.
Creating a New Item (Program)
Note
• A program is the only type of item that can be newly created.
1. On the Item menu, select [New].
fx-9860G SD/fx-9860G: On the computer window, select the flash memory image and then
select [Item] - [New].
ALGEBRA FX, CFX-9850, fx-7400 Series: Open the catalog file, and then select [Item] - [New].
• Input the item name (program name) in the dialog box that appears on the screen.
• The following are the characters you can use in a file name:
A through Z, r, θ, spaces, [, ], {, }, ’, ”, ~, 0 through 9, ., +, –, ×, ÷
• The above operation creates a program group and creates the item inside the program group
(ALGEBRA FX, CFX-9850, fx-7400 Series).
Note
• If a program group already exists, the item is created inside the existing program group
(ALGEBRA FX, CFX-9850, fx-7400 Series).
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Data Editing
2. Double-click on the item to launch the program editor.
3. Input the contents of the program.
• See “8. Program Editor” for details on inputting program contents.
4. Select [File] - [Close] to quit the program editor.
5. Select [File] - [Save] to save the catalog file.
Note
• Program passwords are ignored by this software.
• When a program with password is transferred from the calculator to the computer, the
password is ignored.
• You cannot edit a BASE program.
Displaying, Editing, and Printing Items
k To display and edit an item
1. While an item is selected, select [Item] - [Open] to display the contents of the item.
• In addition to using [Item] - [Open], you can also double click on an item to display its
contents.
• If the item is a program, you can use the program editor to edit its contents.
Note
• You cannot display the contents of G-Mem, Picture, or Dyna-Mem items.
• You can only edit RUN programs. You cannot edit BASE programs. Program passwords are
ignored by the software.
k Printing
1. While an item is displayed, select [File] - [Print].
2. Specify the printer, print options, number of copies, and enlargement factors, and then start the
printing.
• You can use the preview function to display an image of the printout on the screen.
Note
• You can print approximately 70 characters on an A4 size sheet of paper when the font size is
10. To print more data, reduce the size of the printout.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Data Editing
Deleting, Copying, and Moving Groups and Items
k To delete a group and item
Select the group and item to be deleted and then select [Edit] - [Delete], or press the [Delete] key.
k To copy a group and item to another catalog file
1. Select the group and item to be copied and then select [Edit] - [Copy].
2. Open the destination catalog file and then select [Edit] - [Paste].
Note
• You could also drag the group and item to the designation window.
• Copying data between two catalog files that are different formats can cause some of the data
to be lost.
• Available formats depend on graphic scientific calculator model.
k To move a group and item to another catalog file
1. Select the group and item to be copied and then select [Edit] - [Cut].
2. Open the destination catalog file and then select [Edit] - [Paste].
Note
• You could also drag the group and item to the destination window while holding down the [Ctrl]
key.
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Data Conversion
• On the fx-9860G SD/fx-9860G, you can convert between List, File, Matrix, and Spreadsheet data
and csv format data.
• On an ALGEBRA FX, CFX-9850, fx-7400 Series calculator, you can convert between List, File,
and Matrix data and csv format data.
• You can also convert data between fx-9860 format and older model (ALGEBRA FX, CFX-9850,
fx-7400 Series) format.
k To convert calculator data to csv format
1. Select the data you want to convert.
2. On the File menu select [CSV]. On the submenu that appears, select [Save as CSV].
fx-9860G SD/fx-9860G: On the computer window, select the file you want to convert (List, File,
Matrix, Spreadsheet).
ALGEBRA FX, CFX-9850, fx-7400 Series: Select the data you want to convert from the catalog
file List, File, or Matrix format data.
3. On the dialog box that appears, select the destination directory.
4. Click [OK] to convert the data.
• Data that contains complex numbers cannot be converted.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Data Conversion
k To convert csv data to calculator data
1. Select [File] - [CSV-Load from CSV].
2. Select the csv data you want to convert.
3. Select the type of calculator data you want to convert to.
• When converting to fx-9860G SD/fx-9860G Spreadsheet data, input up to eight characters for
the file name.
4. Click [OK] to start data conversion.
5. One of the following happens when conversion is complete.
fx-9860G SD/fx-9860G: The converted data is created.
ALGEBRA FX, CFX-9850, fx-7400 Series: A new catalog file is created.
• Conversion is not performed if the selected csv format file is not compatible with the graphic
scientific calculator data format.
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Data Conversion
k Converting data between fx-9860 format and ALGEBRA FX, CFX-9850, or
fx-7400 Series format
uConverting from fx-9860G SD/fx-9860G to ALGEBRA FX, CFX-9850/fx-7400 Series
1. On the computer window, select the image to be converted.
2. When converting to ALGEBRA FX Series: select [Tool] - [Convert] - [fx-9860
ALGEBRA-FX
CFX-
conversion].
When converting to CFX-9850/fx-7400 Series: select [Tool] - [Convert] - [fx-9860
9850 conversion].
• This will displays a file name input dialog box.
3. Type in the file name, and then click [OK].
• The converted catalog file (with extension “.cat”) will be stored at My Documents\Casio\FA-
124 on your computer’s hard disk.
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Data Conversion
4. When converting to ALGEBRA FX Series: select [Tool] - [Model Type] - [ALGEBRA FX series].
When converting to CFX-9850/fx-7400 Series: select [Tool] - [Model Type] - [fx-7400/CFX9850
series].
5. Select [File] - [Open], and then open the converted catalog file. (See “Transferring files from
your computer to your calculator” on page E-40.)
uConverting from ALGEBRA FX, CFX-9850/fx-7400 Series to fx-9860G SD/fx-9860G
1. Open the catalog file you want to convert.
2. When converting from ALGEBRA FX Series: select [Tool] - [Convert] - [fx-9860
ALGEBRA-
CFX-
FX conversion].
When converting from CFX-9850/fx-7400 Series: select [Tool] - [Convert] - [fx-9860
9850 conversion].
• This will display a file name input dialog box.
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Data Conversion
3. Type in the file name, and then click [OK].
• The converted image file (with extension “.g1r”) will be stored at My Documents\Casio\FA-124
on your computer’s hard disk.
4. Select [Tool] - [Model Type] - [fx-9860].
5. Use the procedure under “Importing a Flash Image or Memory Image” (page E-34) to import the
converted image.
Note
• For information about how data is converted, see “9. Data Transfer with an Old Model Calculator”
(page E-54).
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Screen Capture
The screen image of the calculator can be captured as a bit pattern and transferred to your
computer.
Note
• For details on how to operate your calculator for screen capture, see the section of the
calculator’s User’s Guide titled “Data Communications.”
Capturing a Screen to Your Computer
ufx-9860G SD/fx-9860G
1. On the fx-9860G SD/fx-9860G, turn on manual image transfer.
• In the LINK mode, press 6(CAPT)2(PC)J.
2. On the fx-9860G SD/fx-9860G, display the screen you want to transfer.
3. In FA-124, click
button on the fx-9860 window toolbar.
4. On the fx-9860G SD/fx-9860G, press !h(CAPTURE).
5. The screen transferred to the computer will be displayed after transfer is complete.
uALGEBRA FX Series
1. Set up the calculator to send a screen shot to a computer.
• Use the calculator’s LINK mode set up (u3(SET UP)) to specify Direct (direct send) for
the H-Copy item.
2. On the calculator, display the screen you want to send to the computer.
3. On the FA-124 menu bar, select [Link] - [Screen Capture].
4. On the calculator, press u6(H-COPY) to send the screen shot.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Screen Capture
uCFX-9850/fx-7400 Series
1. Set up the calculator to send a screen shot to a computer.
• On the calculator’s LINK mode, press 6(IMGE) and then turn on the Image Set Mode. In the
case of a color calculator, you can select either MONO or COLR for the Image Set Mode.
2. On the calculator, display the screen you want to send to the computer.
3. On the FA-124 menu bar, select [Link] - [Screen Capture].
4. On the calculator, press M to send the screen shot.
• The screen shot is shown on the display of your computer after the transfer operation is
complete.
Sample screen
5. Save the data in a file.
Select [File] - [Save As].
Specify a file name and save the file.
To change the format of the image file, specify the file type and then save the file.
Note
• Selecting [File] - [Save As] causes a dialog box to appear. This dialog box can be used to
specify a file name and also to specify a drive and directory.
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Screen Capture
Displaying and Printing a Captured Screen Image
k To display a captured screen image
Select [File] - [Open] and open the image file to display the image.
k To print a captured screen image
1. While the image is on the display, select [File] - [Print].
2. Specify the printer, print options, number of copies, and enlargement factors, and then start the
printing.
• You can use the preview function to display an image of the printout on the screen.
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Program Editor
The program editor lets you edit the contents of programs.
Launching the Program Editor
Create a new program or select an existing program to launch the program editor.
uCommand Input
You can input commands using any one of the three following methods.
• Selecting a command from the PRGM menu
• Inputting commands from the keyboard
• Displaying the calculator window and using the mouse to click on its keys
Note
• To display the calculator window, select [View] - [Calculator]. Select [View] - [Calculator] again to
clear the calculator from the display.
• The calculator independent font (i.e. 3 ) is included in the FA124GRF font and FA124ALG font,
and cannot be input from the keyboard.
• Special characters will not appear normally on the display if the FA124GRF font and FA124ALG
font is not installed correctly.
Saving Programs
Use the following procedure to save a program after inputting or editing it.
1. Select [File] - [Close] to quit the program editor.
2. Select [File] - [Save] to save the catalog file.
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Data Transfer with an Old Model Calculator
Using this software to transfer data to the computer from an older model calculator automatically
converts the data to the format used by fx-9860G SD/fx-9860G and then stores it on disk.
• Old Model Caluculator
fx-7700GB
fx-8700GB
fx-7700GE
fx-7700GH
fx-9700GE
fx-9700GH
CFX-9800G
The following table shows how data is converted.
Statistics SD
X-data
f-data
R LIST1
R LIST2
Statistics REG
X-data
R LIST3
R LIST4
R LIST5
Y-data
f-data
Variable Mem
Defm
R disappear
Range
R View Window Mem1
Factor
R Y=DATA
Table Function
Table Recursion
Graph Function
Dynamic Graph
Editor
R Y=DATA, Graph Function, Table Setting
R Y=DATA, Recursion Function, Recursion Setting
R Y=DATA, Graph Function
R Y=DATA, Graph Function
R Program
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Data Transfer with an Old Model Calculator
The following applies to data conversion between fx-9860G SD/fx-9860G data and older model
calculator data.
• Attempting to transfer the following type of data from the fx-9860G SD/fx-9860G to the
CFX-9850 will cause an error (Transmit ERROR).
• More than six List, G-Mem, Pict, or F-Mem items
• A list with more than 255 elements
• A list that contains complex numbers
• Attempting to transfer the following type of data from the fx-9860G SD/fx-9860G to the
CFX-9850 will transfer the data, but the data will not be stored in CFX-9850 memory.
• Table setting data
• Recursion data
• Equation data
• Financial data
• Spreadsheet data
• Geometry data
• Add-in application data
• Hard copy memory
• Setup data
• The following shows how graph line type data and line color data is converted.
• fx-9860G SD/fx-9860G → CFX-9850
Normal → Blue
Thick → Red
Thick Dotted → Green
Dotted → Green
• CFX-9850 → fx-9860G SD/fx-9860G
Blue → Normal
Red → Thick
Green → Dotted
• Sending View Window x-dot data from the fx-9860G SD/fx-9860G to the CFX-9850 will
cause the data to become corrupted.
• The following shows what happens to Setup data in D-Mem.
• fx-9860G SD/fx-9860G → CFX-9850: Setup data is corrupted.
• CFX-9850 → fx-9860G SD/fx-9860G: Setup data is returned to its default.
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Installing an Add-in
fx-9860G SD and fx-9860G support installation of the three types of add-ins described below.
• Add-In Applications: You can install new applications as required.
• Add-In Languages: You can install languages for on-screen messages.
• Add-In Menus: You can install application menus in various languages.
The procedure for installing an add-in the identical to the normal file import operation.
Uninstall is also the same as deleting a normal file.
k To install an add-in
1. Connect the fx-9860G SD/fx-9860G to your computer.
2. On the computer window, click the toolbar
button.
3. Select the flash image icon, and then right-click with your mouse.
4. On the shortcut menu that appears, select [Import fx-9860 File].
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Installing an Add-in
5. Select the file you want to install, and then click [Open].
• This will cause the file to appear on the computer window.
6. Drag the file and drop it into the
[User Name] icon on the fx-9860 window.
• This will install the add-in on the fx-9860G SD/fx-9860G.
k To uninstall an add-in
• You can uninstall an add-in by using the fx-9860G SD/fx-9860G MEMORY mode to delete the
its file.
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Optimizing the Storage Memory or Flash
Image
Storage memory or the flash image can become fragmented after many store and load operations.
Fragmentation can cause blocks of memory to become unavailable for data storage. Because of
this, you should perform the storage memory or flash image optimization procedure periodically,
which rearranges the data in the storage memory or flash image and makes memory usage more
economical.
k To optimize the flash image
1. On the computer window, click the
button on the toolbar.
2. Select the flash image icon, and then right-click with your mouse.
3. On the shortcut menu that appears, select [Optimization].
k To optimize storage memory
1. Connect the fx-9860G SD/fx-9860G to your computer.
2. On the fx-9860 window, click the
button on the toolbar.
3. Select the [User Name] icon, and then right-click with your mouse.
4. On the shortcut menu that appears, select [Optimization].
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
SA0707-D
Download from Www.Somanuals.com. All Manuals Search And Download.
|