CanoScan FS2720U Film Scanner
Product Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CanoScan FS2720U Film Scanner
How to Use the Product Guide
This guide is the supplementary manual to the Getting Started Guide for the CanoScan
FS2720U film scanner. First-time users of the CanoScan FS2720U should start by consulting
the Getting Started Guide, which explains handling procedures. This Product Guide provides
more detail for the topics that could not be included in the Getting Started Guide.
Using the Features of this Electronic Manual
This guide is an electronic manual intended to be read on your computer screen.
You can jump directly to items of interest by clicking them in the table of con-
tents and index, or by clicking hyper links throughout the document.
• The mouse pointer ( ) changes into a pointing finger ( ) when you position it
over a topic in the table of contents, an index page number, or a page number
in a hyper link. This indicates that the display will jump to the corresponding
page if you click the mouse.
• To return to the previous page after jumping, click the [ ] button at the top
of the window.
Conventions Used in this Guide
This symbol indicates precautions that must be taken when
operating the equipment. Ensure that you read all warnings.
This symbol indicates supplementary operating procedures and
other useful information. Read these notes at your own discre-
tion.
•References to Windows in this guide refer to Windows® 98 SE, Windows® 2000
Professional and Windows® Me.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
CanoScan FS2720U Film Scanner
Table of Contents
Features of the CanoScan FS2720U Film Scanner .................... 5
Safety Precautions................................................................. 6
Placement Precautions .......................................................6
Power Supply Precautions ..................................................7
General Handling Precautions ............................................ 8
Safe Locations ............................................................................ 9
Components Guide .................................................................. 11
Scanner ...........................................................................11
35 mm Film Holder .......................................................... 11
IW-50 Film Viewer for IX240 Film..................................... 12
Connecting to a Computer...................................................... 13
What is the USB Interface? ..............................................13
USB Connectors...............................................................13
Connecting Multiple USB Devices .................................... 13
Inserting Film ........................................................................... 14
35 mm Negative and Positive Film (Sleeve Type) ............... 14
35 mm Positive Film (Mounted Slides) .............................. 17
IX240 Film .......................................................................18
IX240 Film Cartridge Removal.......................................... 22
Basic Information About Film ................................................. 23
Film Varieties ...................................................................23
Color/Monochrome Film ..................................................23
Negative/Positive Film ...................................................... 24
Final Film Format .............................................................25
Care and Maintenance ............................................................ 26
Cleaning Film ........................................................................... 27
Dirty Film .........................................................................27
Dusty Film........................................................................ 27
Specifications ........................................................................... 28
Index ......................................................................................... 29
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CanoScan FS2720U Film Scanner
Features of the CanoScan FS2720U Film Scanner
This 2720-dots-per-inch scanner is equipped with a range of outstanding features, a few of
which are mentioned below.
Natural Color Reproduction
The CanoScan FS2720U utilizes a white cold-cathode xenon lamp, highly rated
for reproducing colors closely correlated to natural sunlight. Its proprietary
Canon electrode array also eliminates inconsistencies in illumination. What’s
more, its extensive list of notable features includes long life, low power con-
sumption and immediate startup when the power is switched on.
Fine Color Gradations and High Quality
The scanner is equipped with dedicated line sensors that deliver a basic resolu-
tion of 2720 dpi for each red, blue and green (RBG) channel. This is comple-
mented by its single-pass scanning process, which achieves speed without color
leaching. By scanning at 12 bits per RBG channel (4096 colors each) and output-
ting at 8 or 12 bits per channel, the scanner delivers fine color gradations and
superior image quality.
IX240 Film (Advanced Photo System) Support
The IW-50 Film Viewer is included so that IX240 film used in Advanced Photo
System cameras can be as easily processed as standard 35 mm Film.
Fully Automated (Autofocus/Auto Color Balance)
After the film is inserted, all you need do is click the [Scan] or [Save] button on
your computer screen. The focus, brightness and color balance adjust automati-
cally to produce top-quality images effortlessly.
Dust Cover Shuts Out Dirt
The scanner is equipped with a dust cover that stops dirt and dust from entering
the interior.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
CanoScan FS2720U Film Scanner
Safety Precautions
The following tips were compiled to provide you with the requisite information for using this
product safely. Please read this section completely before using the equipment.
About the Caution and Attention Symbols
CAUTION
This symbol indicates handling precautions that
must be observed to avoid the potential risk of
death or injury. Ensure that you read and follow
the instructions contained in these topics.
ATTENTION This symbol indicates handling precautions that
must be observed to avoid potential accidents
and damage to equipment. Ensure that you read
and follow the instructions contained in these
topics.
Placement Precautions
CAUTION
• Do not place the equipment near alcohol, thinners or other flammable sub-
stances. There is a risk of fire or electric shock if flammable substances enter
the equipment’s interior.
• Do not place any of the following items on top of the equipment. There is a
risk of fire or electric shock if any of these items contact the equipment’s
internal electrical components.
- Necklaces and other metallic objects
- Liquid filled vessels, such as cups, glasses, flower pots and vases
• If a liquid enters the equipment, immediately unplug the power cord from the
electrical outlet and contact your distributor or the nearest Canon Customer
Support Help Desk, which is listed at the back of the Getting Started Guide.
ATTENTION
• Do not place the equipment in the following types of location, which may
involve the risk of fire or electric shock.
- Damp or dusty environments
- Locations subject to direct sunlight
- Locations subject to high temperatures
- Locations close to flames
• Do not place the equipment on uneven or unstable surfaces or places subject
to vibration. There is a risk that the equipment could fall and cause injury.
• Do not place heavy objects on the equipment. There is a risk that they could
fall and cause injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CanoScan FS2720U Film Scanner
Power Supply Precautions
CAUTION
• Do not score, damage or dismantle the power cord or plug. In addition, do not
place heavy objects on, twist or force the cord. There is a risk that short-circuits
from exposed wiring could lead to fire or electric shock.
• Do not handle the plug with wet hands. There is a risk of electric shock.
• Avoid plugging too many power cords into the same electrical outlet. There is
a risk of fire or electric shock.
• Do not bunch up or knot the power cord. There is a risk of fire or electric
shock.
• Insert the plug of the power cord all of the way into the electrical outlet. Loose
plugs may to lead to fire or electric shock.
• Do not use a power cord other than the type shipped with the equipment. Use
of other cords may lead to fire or electric shock.
• In principle, avoid using extension cords, which may lead to fire or electric
shock. If their use is unavoidable, limit the length to 5 meters (16 feet) or less.
In addition, unbunch the cords and ensure that power and extension plugs are
firmly connected. Do not use more than one extension cord in the same
electrical outlet.
• Do not use extension cords in passageways or other locations where people
are likely to step on or trip over the cord and damage it. Short-circuits from
exposed wiring could lead to fire and electric shock.
ATTENTION
• Do not use the equipment with electrical supplies exceeding the rated voltage.
There is a risk of fire or electric shock.
• Ensure that you grasp the plug by its solid portion when unplugging the power
cord. Pulling it out by the cord may wear the cord, expose the insulation and
wiring, and lead to fire or electric shock.
• Always leave a clear area around the electrical outlet so that the power cord
can be immediately unplugged if a contingency should arise.
• Unplug the power cord from the electrical outlet at least once a year, and
clean the area around the base of the plug’s metal pins to ensure all dust is
remmoved. If dust accumulates in this area, it may result in a fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
CanoScan FS2720U Film Scanner
General Handling Precautions
CAUTION
• Do not disassemble, alter or attempt to repair any part of the equipment. The
internal components include high-voltage parts that may lead to fire or electric
shock if incorrectly handled or repaired.
• Unplug the equipment immediately if it emits strange noises, smoke or heat,
or responds abnormally. Contact the distributor or the nearest Canon Cus-
tomer Support Help Desk. Continued use of the equipment could lead to fire
or electric shock.
• Do not use flammable sprays or substances near the equipment. There is a risk
of fire or electric shock if the spray contacts the equipment’s internal compo-
nents.
• Do not insert or drop metallic objects, such as paperclips or staples, into the
interior of the equipment. Be careful also not to spill water, other liquids or
solvents (alcohol, benzene or thinners, etc.) into it. There is a risk of fire or
electric shock if any of these substances contact the equipment’s internal
components. Immediately unplug the equipment if anything gets inside it and
contact your distributor or the nearest Canon Customer Support Help Desk.
• Do not use the equipment on its side.
• Unplug the equipment before cleaning it. Failure to do so could lead to fire or
electric shock.
• Use a well-wrung damp cloth to clean the exterior of the equipment. Do not
use alcohol, benzene, thinners or other flammable substances to clean it.
Contact between these substances and the equipment’s electrical components
could lead to fire or electric shock.
ATTENTION
• Unplug the equipment as a safety precaution if it will be left unused over an
extended period, such as a holiday.
• Take adequate care when carrying or moving the equipment. Dropping it may
cause injury.
• Wait for the equipment to cool down after removing the plug before covering
it with a dust cover or similar device. There is a risk of fire.
• Do not play the CD-ROM in an audio CD player. The loud volume of its
contents may lead to ear damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CanoScan FS2720U Film Scanner
Safe Locations
Follow the guidelines below to locate a safe place to operate the scanner.
• Operate the scanner within the following parameters.
- Temperature range: 5° to 35° C (41° - 95° F)
- Humidity range: 10% to 90% relative humidity (without condensation)
• Operate the scanner with a power supply conforming to the following param-
eters.
- Voltage: 110V (10% volts alternating current)
- Frequency: 50/60 Hertz
• Ensure that there is sufficient clear space around the scanner. The diagram
illustrates the space that should be kept clear as viewed from directly above
the unit.
Approx.
10cm (4 in.)
Approx.
20cm (8 in.)
Film Insertion
Direction
Approx.
10cm (4 in.)
•The interface cable supplied with the scanner is 1.85 meters (6 feet) in length.
Ensure that the scanner is placed within its reach.
• Do not place it in locations subject to extreme changes in temperature or
humidity, which may cause condensation to form and reduce the scanner’s
image quality. If the scanner is being transported from a high temperature to a
low temperature, or vice versa, allow the unit sufficient time to adjust to the
new temperature before using it.
• Do not use the scanner in places subject to direct sunlight or strong light.
There is a risk that the elevated temperature of the internal components may
cause a malfunction or degraded performance. Shield it with thick curtains if a
location subject to direct sunlight is unavoidable.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
CanoScan FS2720U Film Scanner
• Do not place the scanner in the following types of location.
Uneven or unstable surfaces
High-temperature environments
or places close to flames
Locations often subject to vibrations,
smoke, humidity or dust
Locations near TVs or devices
generating strong magnetic fields
Salty or greasy environments
Locations subject to direct sunlight
or strong light
Download from Www.Somanuals.com. All Manuals Search And Download.
11
CanoScan FS2720U Film Scanner
Components Guide
Scanner
Dust Cover
Prevents dirt and dust from
entering the slot. Close it when
the film guide is not in use.
Film Guide
Guides 35 mm film in
holders or slide mounts
as it is inserted. Open
this guide to insert IX240
film installed in the IW-
50 Film Viewer.
Power Indicator
Flashes until the unit is
ready for use. Shines
steadily thereafter while
the power is on.
Power Switch
Turns the scanner
power on and off.
USB Port
Accepts the
supplied USB
interface cable.
Power Cord
Socket
Attach the
supplied
power cord
here.
35 mm Film Holder
Place unmounted 35 mm
negative and positive
films in this holder for
scanning. (p. 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
CanoScan FS2720U Film Scanner
IW-50 Film Viewer for IX240 Film
Place IX240 (Advanced Photo System) film in the IW-50 Film Viewer for insertion
into the scanner.
A Cartridge Chamber
FCrank
Place the IX240 film cartridge in here.
The crank is useful for speeding up
unwinding and respooling.
GOpen Lever
B Exposure Tab
If the exposure tab, which indicates that
the film in a cartridge has been developed
when snapped down, has not been cleanly
snapped, the film will free-wheel and not
advance. Ensure that this tab is completely
snapped.
This lever opens the cartridge
chamber cover C.The lever will not
operate unless the film is respooled
(orange mark displayed in the film
indicator D). When the chamber is
empty, the indicator marks J must
be aligned for the lever to operate.
CCartridge Chamber Cover
Open the cover by aligning the indicator
marks
J
and pushing the open lever
G
to
HFilm Counter Window
the open position. Closing it with or without
a cartridge present will return the open lever
to the closed position and lock it.
Displays the number of the frame
appearing in the scan window I.
IScan Window
DFilm Indicator
The contents of this window will be
scanned. Use the winder E and crank
F to align images within this window
for scanning.
An orange mark will display when the
film is respooled and will disappear when
it is unwound. The cartridge chamber
cover C will not open even if the
indicator marks J are correctly
aligned unless the orange mark
displays in the film indicator.
JIndicator Marks
These marks must be aligned so that
the cartridge chamber cover C can be
opened with the open lever G.
EWinder
KInsertion Arrow
Turn the winder counterclockwise to unwind
the film for viewing. Turn the winder
clockwise to respool the film. A mistakenly
inserted cartridge with undeveloped film will
free-wheel and not unwind.
Insert a loaded IW-50 Film Viewer into
the film scanner with the insertion
arrow on top and pointing into the
scanner.
• The insertion arrow label K is not applied to the film viewer when shipped.
Apply the supplied label to the label position on the film viewer before
using the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
CanoScan FS2720U Film Scanner
Connecting to a Computer
This topic discusses USB connectors and methods for connecting more than one USB device to
your computer.
What is the USB Interface?
USB, the acronym for universal serial bus, is an interface for connecting various
peripheral devices to your computer. It is easier to use than the serial and parallel
interfaces that were widely used before the debut of the USB interface because it
allows devices to be hot-swapped (attached or detached with the power on) and
the connection and settings adjustments are simple. The USB interface can also
accommodate a large number of devices (up to 127). This scanner supports the
USB interface for Windows 98 SE, Windows 2000, and Windows Me, as well as for
Macintosh computers (Mac OS 8.6 or higher) equipped with built-in USB ports.
USB Connectors
There are two types of USB connector: A (flat, larger) and B (almost square,
smaller). The A type is generally reserved for the computer port and the B for the
device port.
A Type Connector
Used for the computer’s USB
port
B Type Connector
Used for the device’s USB
port
Connecting Multiple USB Devices
When the USB ports on a computer are already in use, additional USB devices
can be connected to an unoccupied USB port on one of the devices or to a USB
hub (a device that expands a single port in several). Please note, however, that
the scanner performance is not guaranteed when connected via a USB hub.
Configuration
Configuration
Without a USB Hub With a USB Hub
Computer
Computer
USB Hub
A device for expanding the
number of USB ports
USB Hub
The number of connectable devices
can be gradually expanded by attach-
ing additional hubs together until the
maximum capacity is reached. How-
ever, all the devices may not be
operable at once.
USB
Device
USB
USB
Device
Device
USB
Device
USB
Device
USB
Device
USB
Device
USB
Device
Download from Www.Somanuals.com. All Manuals Search And Download.
14
CanoScan FS2720U Film Scanner
Inserting Film
35 mm Negative and Positive Film (Sleeve Type)
Load 35 mm negative films and positive films that haven’t been slide mounted
into the film holder for insertion into the film scanner.
1. Have the film and film holder at hand.
2. Slide the guide on the film holder to the ‘R’ position.
• Slide the guide all the way until it rests against the stopper.
3. Open the film holder.
• Gently twist the tab at the end of the film holder and open one half as shown.
4. Load the film into the holder.
• Place the film face up in the groove so that the image is viewed correctly when
the ‘R’ on the film holder is facing up.
• The orientation of an image can be corrected with the rotate command of
the scanning software, CanoCraft FSU or Plug-in Module FSU, if the film is
incorrectly loaded.
• Read the section entitled Final Film Format (p. 25) for information regard-
ing film mounts and sleeves.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
CanoScan FS2720U Film Scanner
5. Close the film holder.
• Align the ends of the holder and lightly pinch them together until they lock.
• After you have locked the ends, squeeze and run your fingers along the middle
portion to prevent the film from floating.
6. Position the guide over the frame to be scanned.
• The guide will click into indents in the holder marking the correct position for
scanning as you slide it back and forth. Ensure that the tabs on the guide click
into the indents and that the image is correctly framed by the guide.
Frame to be Scanned
• Reload the film in the film holder if its edges stick out of the holder or the
guide’s movement is impeded.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
CanoScan FS2720U Film Scanner
7. Open the dust cover.
• Insert your fingertips into the notch on either side of the dust cover and pull it
gently down.
Dust Cover
8. Insert the film holder into the scanner.
• Hold the film holder horizontally on edge as shown below, orienting it so that
the orange mark is on the left side. Insert it straight into the scanner until the
orange mark on the guide lines up with the orange mark on the scanner.
Orange Marks
• If the film holder is inserted at an angle, the guide position may be altered
and you may not be able to insert it properly.
• Ensure that the film holder is oriented according to the diagram below so
that the guide is correctly inserted. The film holder will not fit correctly into
the slot if the guide is incorrectly oriented.
Viewed from Above
The ‘R’ should
be correctly
oriented
when viewed
from the left.
The orange
mark should
be on the left.
• Film holders can be purchased separately if the supplied one is broken or
damaged. Inquire at the distributor from which you purchased the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
CanoScan FS2720U Film Scanner
35 mm Positive Film (Mounted Slides)
• Follow the procedures below to insert mounted positive films (mounted slides)
directly into the scanner.
1. Open the dust cover.
• Using your fingertips, grasp the notch on either side of the dust cover and pull
it gently down.
Dust Cover
2. Insert the slide into the scanner, orienting it so that the image is
correctly viewed from the left.
• Insert the slide as far as it will go.
• The image will not be correctly scanned if the slide is inserted at an angle.
• Insert the slide so that the short edge faces the film guide.
• If a slide is inserted at an angle and becomes jammed in the slot, open the
film guide and remove it.
• The orientation of an image can be corrected with the rotate command of
the scanning software, CanoCraft FSU or Plug-in Module FSU, if the slide is
reversed or inverted.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
CanoScan FS2720U Film Scanner
IX240 Film
Follow the procedures below to load an IX240 film cartridge in the film viewer
for insertion into the scanner.
1. Have the IX240 film cartridge at hand.
• Confirm that the cartridge has been developed by looking at the development
mark and the exposure tab. The exposure tab should have been snapped
downward.
Development Mark
Exposure Tab
This mark should
be white.
This tab should be
snapped down.
• Only IX240 films in cartridges and slide mounts can be scanned with the
CanoScan FS2720U. It will not accept sleeve-type IX240 film.
• Undeveloped IX240 film cartridges that are mistakenly placed in the IW-50
Film Viewer will not unwind.
2. Confirm that the film viewer’s film indicator is orange.
Film Indicator
• If the film indicator is not orange, a cartridge is already loaded in the film
viewer. Respool the film and remove the cartridge to make way for the
cartridge you are scanning. (p. 22)
Download from Www.Somanuals.com. All Manuals Search And Download.
19
CanoScan FS2720U Film Scanner
3
Turn the winder to align the indicator marks.
Winder
Indicator Marks
4
Push the open lever to the open position.
The cartridge chamber cover will open.
Cartridge Chamber Cover
Open Lever
Indicator Marks
• The open lever will not operate unless the indicator marks are aligned.
5
Insert the cartridge into the chamber with the development mark
facing upward. Close the cover.
Development Mark
• The cartridge will not
fit into the chamber
unless it is correctly
oriented.
• Close the cartridge
chamber cover all the
way until it locks into
place with a click.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
CanoScan FS2720U Film Scanner
6. Turn the winder counterclockwise until the image you wish to scan
appears in the scan window.
Winder
Scan Window
Film Counter Window
The frame number can be seen here.
The crank is useful for speeding up unwinding and respooling.
7. Turn the film viewer upside-down so that the insertion arrow is
on the top.
Insertion Arrow
8. Open the film guide on the scanner. Insert the loaded film viewer.
• Orient the film viewer so that the insertion arrow is on top and pointing
toward the scanner. Insert it as far as it will go into the scanner until it rests
against the end.
Film Guide
Insertion
Arrow
Download from Www.Somanuals.com. All Manuals Search And Download.
21
CanoScan FS2720U Film Scanner
• The film viewer will not enter the film scanner if the crank handle is
protruding. Confirm that the crank is fully retracted before attempting to
insert the film viewer.
• Ensure that you pull the film viewer straight out of the scanner without
tilting it.
• Film viewers can be purchased separately if the supplied one is broken or
damaged. Inquire at the distributor from which you purchased the scanner.
Exercise due caution with regard to the following when replicating
images.
• Copying paper currency, coins and negotiable securities is an offense and
subject to criminal prosecution.
• The unauthorized duplication of identification materials, licenses, travel
tickets, official documents or private materials is against the law and
subject to criminal prosecution.
• Copyrighted material may not be duplicated without permission of the
copyright holder except for use by an individual or within the confines of
their own residence or a limited area.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
CanoScan FS2720U Film Scanner
IX240 Film Cartridge Removal
Follow the procedures below to remove IX240 film cartridges from the film
viewer.
1. Turn the winder clockwise to completely respool the film.
• The film indicator will show orange when the film is completely respooled.
Winder
Film Indicator
Scan Window
No film should be visible here.
2. Turn the winder to align the indicator marks.
Winder
Alignment Marks
3. Push the open lever to the open position to open the cartridge
chamber cover. Remove the cartridge.
Cartridge Chamber Cover
Open Lever
Alignment Marks
Download from Www.Somanuals.com. All Manuals Search And Download.
23
CanoScan FS2720U Film Scanner
Basic Information About Film
This section describes the available varieties and characteristics of various types of film. This
information is useful when choosing film format and development options.
Film Varieties
The most common format is 35 mm film (135 film). Recently, a new format has
been launched. IX240 film complying to Advanced Photo System standards is
compact, simple to handle and equipped with a range of new features.
The state of the cartridge can be
told from the marks.
1 Unused
2 Filming in Progress
3 Filming Complete
4 Developed
35mm
24mm
35 mm Film
IX240 Film Cartridge
The CanoScan FS2720U accepts both types of film for scanning. Please select the
film that matches your camera.
Films in the 4x5, 120 or 220 roll film or similar formats cannot be scanned in the
CanoScan FS2720U. The scanner accepts 35 mm films in sleeves or slide mounts
and IX240 film in cartridges or slide mounts. Please read the section entitled
Final Film Format (p. 25) for information regarding film mounts and sleeves.
Color/Monochrome Film
Films are available in color or monochrome formats. The CanoScan FS2720U
accepts both and can even reproduce color films in the monochrome format.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
CanoScan FS2720U Film Scanner
Negative/Positive Film
Color Negative Film
Negative film is used to make prints. The light and dark portions of the film are
reversed from the image. It permits a large degree of latitude (the extent to
which it is under- or over-exposed) so that even if a picture is slightly under- or
over-exposed (the amount of light striking the film) when shot, the problem can
be corrected by the developer when printed to paper. The negative film format is
recommended when you wish to shoot without being strictly conscious of the
exposure setting or when you wish to have the picture output as prints. How-
ever, the color of the film base (the color of the film itself) varies somewhat
between manufacturers and between individual products. For this reason, the
CanoScan FS2720U has to utilize a color correction process to reproduce colors
correctly. This process is conducted automatically by the CanoScan FS2720U
auto color balance function.
Color Positive Film
Positive film (reversal film) reproduces the colors on film as they are on the
photographic subject so that the colors of a photographed object are immedi-
ately apparent. This format is used when the pictures are viewed as slides or
when printing plates are being made. Compared to negative film, the latitude of
positive film is narrow, requiring the photographer to pay more attention to the
exposure setting. Since there is no effect on color reproduction because of
differing film base colors, the CanoScan FS2720U does not need to perform its
auto color balance function on films in this format.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
CanoScan FS2720U Film Scanner
Final Film Format
When you ask for a 35 mm film to be developed, you can order it to be
mounted in a sleeve or in a slide mount. Similarly, IX240 film can be ordered in a
sleeve, slide mount or cartridge format.
Frame
Sleeve
Slide Mount
Cartridge
(IX240 Film)
The standard format for 35 mm negative film is a six-frame sleeve. Positive film
can be ordered in either a six-frame sleeve or slide mounts. IX240 film is normally
developed in the cartridge format, eliminating the need to specify a format. The
CanoScan FS2720U accepts 35 mm film sleeves and slide mounts and IX240 film
slide mounts and cartridges for scanning. Select any of these four formats to suit
your convenience.
Film Type
Final Film Format
Formats Accepted by
the CanoScan FS2720U
Sleeve
o
o
x
35 mm Film
Slide Mount
Sleeve
Positive
IX240 Film
Slide Mount
Cartridge
Sleeve
o
o
o
o
35 mm Film
IX240 Film
Negative
Cartridge
Download from Www.Somanuals.com. All Manuals Search And Download.
26
CanoScan FS2720U Film Scanner
Care and Maintenance
Follow the procedures below to clean dirt and dust off the exterior of the scanner.
1. Turn off the computer and peripheral devices, including the scanner.
2. Unplug the scanner’s power cord, grasping it by the solid portion
of the plug.
3. Moisten a soft cloth with water and wring it well.
Wipe off the dirt and dust.
• Do not wet the connectors or metal parts of the back panel. Ensure that you
wipe these parts with a dry cloth if they should get wet.
• Do not wipe the equipment with an extremely wet cloth and do not spray
cleansers or water directly onto it. There is a risk that liquids could enter the
interior and degrade image quality or cause malfunctions or accidents.
• Never apply alcohol, thinners or benzene to the equipment. These substances
may distort, discolor or dissolve the casing.
4. Wipe off all moisture with a soft, dry cloth.
• Ensure that all moisture is removed from the unit.
Never apply alcohol,
thinners or benzene to
the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
CanoScan FS2720U Film Scanner
Cleaning Film
Follow the procedures below to clean films if they become dirty or dusty.
Dirty Film
Wipe the film lightly with a clean eyeglass lens cleaning cloth.
• Do not wipe forcefully. Strong wiping will damage the film.
• Never apply water, alcohol, thinners, benzene or other chemicals to the film.
These substances will cause the emulsion to peel, or alter or dissolve the film.
Never apply alcohol, thinners,
benzene or other chemicals to film.
Dusty Film
Hold the film lightly by the edges and remove the dust with a blower brush.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
CanoScan FS2720U Film Scanner
Specifications
Type
Moving Film Carriage/Desktop Model
Scanning Element
Light Source
Charge-Coupled Device 3-Line Color Image Sensor
White Cold-Cathode Xenon Lamp
2720 dots per inch
Scanning Resolution
Scanning Modes
Color/Grayscale/Black and White
12-Bit Scanning/8-Bit or 12-Bit Output
3.2
Scanning Gradation
Maximum Scanning Density
Scanning Speed
35 mm Positives 13/20/25 seconds* (Switchable)
35 mm Negatives 13/26/39/52/78 seconds* (Switchable)
IX240 Positives
10/15/20 seconds* (Switchable)
IX240 Negatives 10/20/30/40/60 seconds* (Switchable)
Effective Scanning Area 35 mm Film
IX240 Film
24.0 x 36.0 mm ± 1 mm
17.4 x 31.3 mm ± 1 mm
Auto/Manual
Focal Modes
Prescan Speed
7 seconds/175 dots per inch, positives
5~200%
Magnification
Interface
USB
Power Supply
100~240 V AC, 50~60 Hz
Standby: >18 Watts
Operating: >30 Watts
85 x 321 x 147 mm (3.3 x 12.6 x 5.8 in.)
Approximately 2.1 kg (4.6 lbs)
Maximum Power Consumption
Dimensions (w x l x h)
Weight
These specifications may change without notice.
* Times do not include transmission time to the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
CanoScan FS2720U Film Scanner
Index
A
M
Advanced Photo System
Auto Color Balance
Autofocus
5
Monochrome Film 23
Mounted Slides 17
Mount 25
5
5
C
N
Care and Maintenance 26
Cartridge 18, 25
Chamber 12
Chamber Cover 12, 19
Removing the 22
Cleaning
Negative Film 24
O
Open Lever 12, 19
Orange Mark 12, 16
P
Placement Precautions
Positive Film 24
Power
6
Film 27
the Exterior 26
Clear Space Requirements
Color Film 23
Components Guide 11
Crank 12
9
Cord Socket 11
Indicator 11
Supply Precautions
Switch 11
7
D
R
Development Mark 18, 19
Dust Cover 11, 17
E
Exposure Tab 18
F
R Position 14
Respooling Film 12
S
Safe Locations
9
Safety Instructions
Scan Window 12
Sleeve 14, 25
Specifications 28
T
6
Film
Guide 11
Counter Window 12, 20
Format 23
Indicator 18
Inserting 14
Mounts 25
Types 25
35 mm
Film 23
Film Holder 11, 14
Negative Film 14
Positive Film 14, 17
Final Film Format 25
G
General Handling Precautions
I
Insertion Arrow 12, 20
IW-50 Film Viewer 12, 18
IX240
U
8
Unwinding Film 12
USB
Connector 13
Hub 13
Interface 13
Port 11, 13
Film 12, 18, 23, 25
Film Cartridge Removal 22
W
Winder 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
1. No part of this document may be reproduced or transmitted in any form or by any means, electronic
or mechanical, for any purpose, without the express written permission of Canon Inc.
2. The equipment and software described in this guide are subject to change without notice.
3. Notwithstanding the considerable care taken in preparing this guide, please note that Canon Inc.
does not accept liability for any results arising from the operation of the equipment or software
mentioned herein.
4. Please note that scanning copyrighted materials, including documents and images, without permis-
sion from the copyright holder is prohibited by law, except for personal or household use.
5. Portions of this guide are reproduced herein with the permission of Abode Systems Incorporated.
Trademark Acknowledgment
• Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
• IBM, IBM PC/AT Series are trademarks of International Business Machines Corp., USA.
• Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
• Macintosh is a trademark of Apple Computer, Inc.
• All other brand names and product names used in this manual are trademarks or registered
trademarks of their respective holders.
©CANON INC. 2001
CREATED IN JAPAN
Download from Www.Somanuals.com. All Manuals Search And Download.
|