Printer User Guide
ENGLISH
Make sure you read this guide, including the “Safety
Precautions” section, before using the printer.
Store this guide safely so that you can use it in the future.
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First
Warning Against Copyright Infringement
The images printed with this product should be intended for personal use. Do not print images that
infringe upon copyright laws without the prior permission of the copyright holder.
Warranty Limitations
This product’s warranty is only effective in the country of sale. If there is a problem with the printer
while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
LCD Monitor (Screen)
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than
99.99% of the pixels operate to specification. However, some pixels may occasionally misfire or
appear as red or black dots. This has no effect on the printed image and does not constitute a
malfunction.
The LCD monitor may be covered with a thin plastic film for protection against scratches during
shipment. If so, remove the film before using the printer.
Conventions Used in this Guid
This printer will be referred to as “SELPHY” or “p
The various types of memory cards that can be usrinter are ectively referred to as “memory
cards”.
Icons are used in the text to represebutto. For details, refer to “Controls”
Language that displays the creen e [ ] (square brackets).
: Things you should e careful about
: Supplemental infortion
(p. XX) : Reference pageXX” stas for a page number)
This guide assumes all funcat their default settings.
Table of Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Before using the product, please ensure that you read the safety precautions described below. Always
ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to yourself and other
persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you use.
Denotes the possibility of serious injury or death.
Warning
Store this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the printer if it has been dropped or otherwise
damaged.
Stop using the product immediately if it emits smoke, a strangsmell, or otherwise behaves
abnormally.
Do not use organic solvents such as alcohol, benzine, oinnto clean the equipment.
Do not let the product come into contact with watee.g. sea r) or other liquids.
Do not allow liquids or foreign objects to enteer.
This could result in electrical shock or fire.
If liquid comes into contact with the product, nplug it outlet and csult your retailer or a Canon
Customer Support Help Desk.
Do not touch this printer or the pong tnderstorms.
This could result in electricaor firstop ing the equipment and distance yourself from it.
Unplug the power corperiodically away any dust and dirt that has collected on the plug,
the exterior of the powoutlet, and the sounding area with a dry cloth.
Do not handle the poword witwet hands.
Do not use the equipmena mner that exceeds the rated capacity of the electrical outlet or
wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the
outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.
Do not cut, damage, alter or place heavy items on the power cord.
This could result in electrical shock or fire.
Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible
to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD
player.
Denotes the possibility of injury.
Caution
Do not stick any part of your hand into the printer interior.
Be sure to place SELPHY safely so as to avoid tripping over the power cord.
This could lead to injury or damage the printer.
Avoid using, placing or storing the printer in the following places.
Places subject to strong sunlight. Places subject to temperatures above 40 °C (104 °F).
Humid or dusty areas. Places subject to strong vibrations.
These could result in electrical shock, burns, fire or other injuries.
High temperatures may cause deformation of the adapter or printer casing.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Denotes the possibility of damage to the equipment.
Caution
Unplug the product from the power outlet when you are not using it.
Do not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting
in fire.
Setting Up SELPHY
Place SELPHY on a stable and even surface, such as a
table. Never place it on an unstable or tilted surface.
Keep SELPHY at least 1 m (3 ft.) from devices emitting
electromagnetic waves or strong magnetic fields.
More than the
length of the
paper
Make sure there is at least 10 cm (4 in.) of free space
around SELPHY.
Since paper will pass in and out of SELPHY during
printing, make surhe space behind the printer is greater
than the length of paper.
10 cm (4 in.)
or more
10 cm (4 in.)
or more
Never place SELPclose to tors or other devices that generate strong electromagnetic fields.This
may damage the prir or cauit to malfunction.
Do not place near a telradio. This may cause the printer to malfunction.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Components Guide
Card Slots (p. 12)
Paper Cassette
Ink Cassette Lock (p. 14)
Compartment (p. 10)
Ink Cassette Compartment (p. 10)
Ink Cassette Compartment Cover
Paper Cassette
Compartment Cover (p. 10)
USB Terminal for Digital Camera/
USB Flash Memory Connection
USB Terminal for Computer
Connection (p. 24)
Battery/Battery Cover
Lock (p. 29)
Battery Cover (p. 29)
(Air vents are behind
DC IN (Power Input) Terminal
Security Slot*
Paper Ejection Slot
*
Security cables, such as a Kensington lock, can be attached to this slo
Controls
Icons Used in This
Name
Function
Guide
—
q
Screen (LCD Monitor)
Power Button
Menu Button
k
o
u
OK Button
Sets the selected item.
Up/+ Copies Button
Specifies number of copies, selects items to set.
Switches images, changes settings.
Down/– Copies Button
d
Left Button
Right Button
Back Button
Print Button
l
r
v
p
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Information Displayed on the Screen
in use (An SD card is used in this
example)
Paper orientation
(Settings that are not available are
grayed out)
File number
Installed ink cassette type
(Postcard size is used in this example)
Total number of images to be printed
Number of copies for the displayed image
Hiding Information Displayed on the Sceen
You can hide the information displayed on the screen and view iea larger size.
Disettingscreen.
1
e the setting.
2
Press the
Press the
ud
l r
buttons to select [Info Display].
buttons to select [Off], then press the
v
button to complete the setting.
Pressing the
button again will restore the image
v
display screen.
The image will display full screen, and a frame that
indicates the printing area will appear.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Preparations for printing images. A Postcard size Color Ink Cassette/Paper Set (sold separately) (p. 2) will be
used as an example, however Color Ink Cassette/Paper Sets other than Postcard size may also be used in
the same way to prepare for printing.
Preparing the Ink Cassette
Check the ink cassette.
Check that the paper size and the size shown on the color
ink cassette (Card size, Postcard size etc.) match.
Check that the ink sheet is taut with no slack. If the ink
sheet is slack, push and turn the sprocket as shown in the
illustration.
If you overwind the ink sheet, it may not be possible to
use all the paper for printing and the ink sheet may tear.
Ink sheet
Do not touch or pull on the ink sheet. Do not touch the ink cette h wet or sweaty hands. You may not
be able to print if the ink sheet is damaged, dirty or wet.
Preparing the Paper Cassette
eck e paper size.
1
2
eck that the prepared ink cassette and the size shown
the paper cassette (Card size, Postcard size, etc.)
match.
Open the lid.
There are two steps to open the lid. Open the outer lid (
)
first, then open the inner lid ( ).
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the paper.
3
Set the paper into the paper cassette that you prepared.
You can place up to 18 sheets in the paper cassette.
Inserting 19 or more sheets may damage the printer or
cause malfunction.
Shiny side
Hold the paper as shown in the illustration, with the shiny
side facing up and put it into the paper cassette. Do not
touch the print side (shiny side) of the paper with your
fingers. This may prevent you from making clean prints.
If a protective sheet is included with the paper, remove it
and set the paper only into the cassette.
When making Postcard size prints that have a section
for pasting a stamp, insert the paper so that the stamp
section is facing the direction shown in the illustration.
Cloid.
4
Cner lid untclicks into place.
Leaouter lid open during printing.
Use only dedicated er for uin SELPHY CP series printers included in the genuine Canon brand
Color Ink Cassette/PapRegular printing paper, regular postcards, or dedicated paper for SELPHY
ES series printers cannot be used.
Never do the following, as it may result in failure or cause the printer to malfunction:
- reverse the paper (the shiny side is the print side)
- bend or separate the paper at the perforations before printing
- use label sheets that have begun to peel or label sheets with portions peeled back
- write on a sheet before printing
- print on already printed paper
- reuse a spent ink cassette
Do not touch the springs of the paper cassette.
If the springs are bent or deformed, paper will not feed correctly into
SELPHY.
Do not touch or scratch the print surface (shiny side), or touch the
paper with wet hands. If the print surface becomes dirty or wet, you
will not be able to make clean prints.
Spring
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Ink and Paper Cassettes
Open the covers.
1
2
3
Open the covers for the ink cassette and paper cassette
compartments.
Insert the ink cassette.
Insert the ink cassette into the printer in the direction
indicated by the arrow on the cassette until it clicks and
locks into place.
Close the ink cassette compartment cover.
Insert the par ssette.
ptte all the ay into the compartment.
Connecting SLPHY
Plug the adapter cord into SELPHY.
1
2
Fully insert the adapter plug into SELPHY.
Connect the power cord.
Connect the power cord to the compact power adapter,
then plug the other end into a power outlet.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Display Language
You can change the language displayed in the LCD monitor menus and messages.
Turn on SELPHY.
1
Press and hold the
the left displays.
q
button until the screen shown at
To turn the power off, press and hold the
q
button again
until the displayed screen changes or turns off.
Adjust the screen for ease of viewing.
2
3
Raise the LCD monitor and adjust until the screen is
easily visible.
Do not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Approx. 45°
Displhe sets screen.
Pr
pre
button.
buttons select [Printer Setup], then
d
button.
o
Display the language settings screen.
4
5
Press the
Press the
ud
o
buttons to select [Language].
button.
Select a language.
Press the
udl r
buttons to select a language, then
press the
button.
o
Pressing the
v
button twice will restore the screen in
Step 1.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Memory Cards and Memory Card Slots
Memory Cards That Can be
Used Without an Adapter
Memory Cards That Require an Adapter
(commercially available)
Card Slots
SD Memory Card
SDHC Memory Card
SDXC Memory Card
miniSD Memory Card
miniSDHC Memory Card
microSD Memory Card
microSDHC Memory Card
microSDXC Memory Card
RS-MMC Card *1
MMCmobile Card
MMCmicro Card
MultiMediaCard
MMCplus Card
+
SD/MMC
HC MMCplus Card
2
CF (CompactFlash) Card
Microdrive
xD-Pre Card
*
CF/microdrive
Memory Stick
Memory ck micro
Memory Stick PRO
Memory Stick
Memory Stic
MS/MS Duo
*1 “RS-MMC” is an abbrevian of “ReduceddiaCard”.
*2 Purchase the CompactFlCard Adapter foure Card.
For memory cards thequire adapter, be sure to first insert the memory card into the adapter before
inserting into the appropard slot.
If you insert the memory card into a card slot without using an adapter, you may not be able to remove
the memory card from the printer.
Use a memory card formatted in the device used for taking the images. A memory card formatted on a
computer may not be recognized.
Refer to the user guide included with your memory card and adapter for handling instructions.
About USB Flash Memory
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p. 14).
Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY.
Irregularly sized images, or images that have been edited on a computer may not display or print properly.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Printing Images
You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
Turn on SELPHY.
1
Press and hold the
the left displays.
q
button until the screen shown at
To turn the power off, press and hold the
q
button again
until the displayed screen changes or turns off.
Adjust the screen for ease of viewing.
2
3
Raise the LCD monitor and adjust until the screen is
easily visible.
Do not raise the LCD monitor more than 45° as this may
result in damage malfunction.
Approx. 45°
Insgle memry card into the slot.
Inseemory card fully into the appropriate slot.
l disy.
Label side
Select an image.
4
5
Press the
l r
buttons to select an image to print.
If you press and hold one of the
jumps by 5 images.
l r
buttons, the display
Select the number of copies.
Press the
ud
buttons to select the number of copies.
If you press and hold one of the
ud
increases or decreases by 5 copies.
You can select up to 99 copies per image.
To print another image, repeat Steps 4 and 5.
buttons, the number
Number of copies
for the displayed
image
Total number
of images to be
printed
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Print.
6
Press the
p
button to start printing.
During printing, the paper will pass in and out from the
back of SELPHY several times. Do not touch the paper
until printing has finished and the printed sheets collect
on the print output tray (on the outer lid of the paper
cassette).
Do not let 19 or more printed sheets collect on the print
output tray.
To cancel printing, press the
v
button.
Insert the paper.
7
8
When the paper is depleted, remove the paper cassette
from SELPHY.
Change the ink cassette.
When the color indepleted, open the ink cassette
compartmeovend move the lock as shown in the
illustration. Thssette will be ejected.
Never pull out the pr cassette, opsette compartment cover, or remove the memory card
while you can hear tprinter’s operatiimmediately after turning on the printer, or during printing.
This may cause the ter to malfuction.
It may take some time ages display if the memory card contains a large number of images.
When the total number of copies for printing is set to 0 and you press the
button, the currently
p
displayed image will print once.
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified
Printing From USB Flash Memory
Just like images on memory cards, images on commercially available USB flash memory can also be printed.
Insert a USB flash memory.
Insert a USB flash memory as shown.
All further steps are the same as those used for printing
Depending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not
operate properly.
Refer to the user guide included with your USB flash memory for operating instructions.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing All Images
You can print all images on a memory card at once.
Display the menu.
1
2
Press the
k
button.
Display the settings screen.
Press the
ud
buttons to select [Print All Images], then
press the
button.
o
ect e number of copies.
3
4
ss th
ud
buttons to set the number of copies.
u can select up to 99 copies per image. If there are
ore than 1000 images on the card, only 999 copies will
be printed in order of the most recent by shooting date.
Number of sheets
required
Number of copies
Print.
Press the
p
button to start printing.
To cancel printing, press the
v
button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the Printed Photos
When both edges of a print have perforations, you can remove the edges
by bending them.
Use an oil-based pen to write on prints.
To prevent discoloration, do not store prints in places subject to
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct
sunlight.
Avoid the following actions as they may result in color change, color
fading or color bleeding: Sticking any type of adhesive tape on a print
surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile
solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for
prolonged periods.
If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or
cellophane.
Color may change over time or depending on storage conditions. Canon assumes no liability for color
changes.
Cleaning Up After Printing
After you finish printing, follow the steps below to cletore SELY.
Lower the screen (LCD monitor) comorag
Unplug the power cord from the powsconct the adapter plug from SELPHY.
If the compact power ader hot, cooled down before you store it.
Remove the paper caste and close tssette compartment cover. Keep the remaining paper
inside the cassette and ore the cassette k place free from dust.
Keep the ink cassette ine SELPH
Store SELPHY horizontalln a darlace free from dust.
When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely
lowered.
If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.
When you have more than one ink cassette, keep one inside SELPHY, and put the other inside the
original packaging or a bag to protect it from dust, and store it in a dark place.
When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark
place.
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Variety of Images
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image.
You do not need to repeat the settings for each image because once the settings are made, they are applied
for all images.
Making Settings
Display the settings screen.
1
Press the
Press the
press the
k
button.
buttons to select [Print Settings], then
ud
button.
o
Seem and hange the settings.
2
3
Pre
ress e
ud
l r
buttons to select an item.
buttons to change the settings, then press
e
tton to complete the setting.
v
ssing the
v
button again will restore the image
play screen.
Print.
button to print.
p
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing With the Date (Date)
You can print the shooting date recorded by the
digital camera.
Off (Default setting) /
On
08/08/2010
Turning off SELPHY will return the setting to [
Off].
Since the date printed will be the date the image was recorded by the digital camera, it cannot be
changed on SELPHY.
The date will not print if [
Index], [
ID Photo] or [
Getting the Best Results With Auto Correction (Image Optimize)
SELPHY will automatically correct the image to
achieve optimum image quality.
Off / (Default setting)
Some images may not be adjusted correctly.
Turning off SELPHY will return tOn]
Image Optimize] will not be applied.
The level of correon will change the page layout and paper size.
Correcting Red yes nd Printing (Correct Red-Eye)
Correct images with red-eye.
Off (Default setting) /
On
Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [
printing images with red-eye.
On] only when
If SELPHY is turned off or the memory card is removed, the setting will return to [
Off].
Red-eye may not be automatically detected or optimally corrected when faces appear extremely small,
large, dark or bright in relation to the overall image, with faces turned to the side or diagonally, or faces
with a portion hidden.
Red-eye correction is not available if [
2-up], [
4-up], [
8-up], or [
Index] is selected in [Page
When [ Sepia] or [ B/W] is selected in [My Colors] (p. 20), red-eye correction will not be applied.
The level of correction will change depending on the page layout and paper size.
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Layout and Printing (Page Layout)
You can set the number of images that you want
to print on one sheet. The number of images that
layout.
1-up
(Default setting)
Prints one image using a full sheet
Index
Prints as an index
2-up
4-up
Prints two images on one sheet
ID Photo
Prints ID photos on one sheet
Automatically arranges images in
a variety of sizes for printing on a
single sheet (p. 20)
Prints four images on one sheet
Prints eight images on one sheet
Shuffle
8-up*
* Set the layout to [
The settings will be retained even if SELPHY is turned off r the mory card is removed from the slot.
The image position cannot be specified.
Indn print all iges on a memory card as an
index print.
Printing an ID Phto D Ph
Prints two ID photos each in three different sizes for
a total of six photos on a single sheet, as shown in
the picture at the left.
Prints can be made on L size or Postcard size paper
Paper
Picture Size
45 x 35 mm
(1.8 x 1.4 in.)
40 x 30 mm
(1.6 x 1.2 in.)
30 x 24 mm
(1.2 x 0.9 in.)
L Size
60 x 51 mm
Postcard Size
45 x 35 mm
(1.8 x 1.4 in.)
40 x 30 mm
(1.6 x 1.2 in.)
(2.4 x 2.0 in.)
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please
contact the appropriate institution for details.
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Arranging Images of Different Sizes (Shuffle)
Shuffle automatically arranges images in a variety of
sizes for printing.
A group of up to 8 images, or a group of up to 20
images can be printed on a single sheet.
Prints can be made on L size or Postcard size paper
ud
buttons
to select [Page Layout] in the screen in Step 2.
Press the
press the
buttons to select [Shuffle], then
button.
l r
o
When the screen shown on the left appears, press
the buttons to select an option.
ud
Press the
buttons to change the settings, then
l r
press the
button to complete the setting.
v
Pressing the
v
button twice will restore the image
display screen.
The image position cannot be specified.
If you select [20] in [Max. Images], it may take some time before ages start printing.
Printing With or Without a BoBordes)
can set images to print with or without a border.
Borderless (Default setting) / Bordered
Turning off SELPHwill return e setting to [
If you select [
].
Borderless
Changing the Color Tone and Printing (My Colors)
You can adjust the colors in your images, or make your images sepia-toned or black and white.
Off
Intense, natural colors like those
obtained with positive film
—
Positive Film
Sepia
(Default setting)
Emphasizes the contrast and color
saturation for a vivid impression
Vivid
Changes the image to sepia tone
Tones down the contrast and color
saturation for neutral hues
Neutral
B/W
Black and white
Turning off SELPHY will return the setting to [ Off].
applied.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Skin Look Smooth in Prints (Smooth Skin)
Makes skin look smooth and beautiful in prints.
Off (Default setting) /
On
When printing is finished, turning off SELPHY and removing the memory card will return the setting to
Off].
Correction may be applied to areas other than skin, producing unexpected results.
Index], [Smooth Skin] will not be applied.
[
Adjusting the Brightness (Brightness)
You can adjust the brightness of an image within a
range of ±3.
The larger the + value, the brighter the image gets.
The larger the - value, the darker the image gets.
Turning off SELPHY will return the setting to [0].
[Brightness] is not available if [
Changing the Date Format (Drmat
an change te order of the printed date
m/dd/yy (Default Setting), dd/mm/yy, yy/mm/dd
08/08/2010
2010/08
The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing From Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and
take advantage of various printing functions that cannot be done with just SELPHY alone. Following the audio
guidance will allow inexperienced computer users to print easily.
Select favorite images from the index and print
You can select images you wish to print from an index, and print them all at
once.
Print with decorations
You can add frames or stamps to your images and print. You can also add
text to your images and print.
Print calendars
You can add calendars r prints
System Requements
Windows
Macintosh
Windows
Windows Vie Pack 1,
Service Pack 2
OS
Mac OS X v10.4 – v10.6
Windows XP Service Pack 3
Configuration
The above OS should be pre-installed on computers with built-in USB ports.
CPU
Pentium 1.3 GHz or higher
PowerPC G4/G5 or Intel Processor
Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Vista (64 bit, 32 bit): 1 GB Mac OS X v10.4 – v10.5: 512 MB or more
RAM
or more
Mac OS X v10.6: 1 GB or more
Windows XP: 512 MB or more
Interface
USB
Free Hard Disk
Space
120 MB or more*
1,024 x 768 pixels or more
140 MB or more
Display
1,024 x 768 pixels or more
*
For Windows XP, Microsoft .NET Framework 2.0 (max. 280 MB) must be installed. Installation may take some time
depending on your computer’s capabilities.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Starting the Software
Windows Vista and Mac OS X 10.5 are used for these explanations.
Items to Prepare
Computer
A commercially available USB Cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Type B
connector).
Install the software.
1
Windows
Place the CD-ROM in the computer’s CD-ROM drive
and click [Easy Installation] when the screen on the left
appears.
Follow the on-screen instructions to proceed.
If the User Account Control window appears, follow the
on-screen instructions to proceed.
h the insation to display the screen on the
l
Macintosh
Place the CD-ROM in the computer’s CD-ROM drive and
double-click
.
When the screen on the left appears, click [Install] and
follow the onscreen instructions to proceed.
When the installation finishes, click [Finish] to restart the
computer and complete the installation.
Prepare SELPHY.
2
Turn off SELPHY and remove the memory card or USB
flash memory.
Insert an ink cassette and a paper cassette that contains
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect SELPHY to the computer.
3
Use the USB cable to connect SELPHY to the computer.
Refer to the user guide included with the cable or
computer for handling instructions.
Commercially available USB cable
Turn on SELPHY.
4
5
Press the
q
button to turn on SELPHY.
Windows
When the installation finishes, click [Restart] to restart the
computer and complete the installation.
Confirm that the software has been started
properly.
The software l sand the screen on the left will
apphen a cction between SELPHY and the
establisd.
Pps 2 to 4 utomatically start the software
the e you want o use it.
Windows
If the screin Step 5 does r, open it from the [Start] menu
r
[All Programs]
r
[Canon Utis]
[SELPHY Photo Print]
[SELPHY Photo Print].
r
r
Macintosh
If the screen in Step 5 does not appear, follow the procedure below to register your printer.
After clicking [ ] in the menu, click [System Preferences], then [Print & Fax] to open the [Print
& Fax] window. Click [+] to select [CP800] from the pop-up window, then click [Add].
After you have finished registering your printer, click [SELPHY Photo Print] from the Dock (the
bar at the bottom of the desktop), and the screen in Step 5 will appear.
SELPHY may not operate correctly if it is connected to a computer via a USB hub.
SELPHY may not function properly if other USB devices (with the exception of a USB mouse or USB
keyboard) are used at the same time. Disconnect any other USB devices from your computer and then
reconnect SELPHY.
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without
disconnecting the USB cable.
For details on how to awaken the computer, refer to the user guide included with your computer.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software to Print
Use the installed software (SELPHY Photo Print) to print images from your computer.
The [Simple print] feature will be explained in this section. Using this feature, you can view all your images at
once and select which ones you want to print. If your computer is equipped with speakers, set the volume so
that the audio guidance for necessary operations can be heard.
Display the print menu.
1
Click [Print menu].
If printing preparations are not complete (paper cassette
and ink cassette inserted), you cannot click [Print menu].
Follow the audio guidance or onscreen instructions to
perform the necessary operations.
Select a print method.
2
Click [Simple prin
You can maprinwith frames, stamps, and speech
bubbles by cliecoration print].
Yoake priith calendars added by clicking
int].
ct an image.
3
You can seleche conditions f
images to disy.
ages will display in an index within the [My Pictures]
folder in Windows, and the [Pictures] folder in Macintosh.
Click an image to select for printing.
The background color changes and the
image is set for printing.
Use the same procedure to click all images
you want to print.
If you click an image again, the background
color switches back to the original color and
the settings are canceled.
Select an image, then click [Next].
You can display images saved in another folder by
pressing this button and selecting a folder from the
screen that appears.
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the number of prints.
4
Select the number of copies for each image.
For Windows, click [Print] to start printing.
For Macintosh, click [Print menu], then click [Print] in the
screen that appears.
Press the - or + buttons to set the
number of prints.
End the program.
Windows
5
When all printing inished, click
at the top right
corner of the ee
Mac
Wnting is fined, click
of n.
at the top left corner
Turning off AudGuidanc
Audio guidance maot play properly e computers. If the audio guidance is difficult to hear,
follow these steps to n it off bere using the software.
Turning off Audio Guidance
While in the screen from Step 1 in “Using the Software to
Audio guidance turns off.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing From Your Digital Camera
You can select and print images from a digital camera that supports the PictBridge standard.
A Canon brand compact digital camera will be used as an example to explain the print method. If operations
are different for the digital camera you use, refer to the user guide included with your digital camera.
Make sure that a memory card is not inserted
1
in SELPHY, and it is not connected to a
computer.
Connect SELPHY to the digital camera using
2
the interface cable (USB cable) included with
the digital camera.
First turn oSEHY, then turn on the
3
digitmera aplay back the images
on al came.
Depg on the digital camera you use,
n the gital camera’s screen.
may appear
orm the necessary operations on your
ital camera to select an image for printing.
Use the digital camera to start printing.
4
Printing starts.
After printing has completed, turn off SELPHY and the
digital camera, then unplug the cable.
You cannot stop printing with the
button. Use the digital camera to stop printing.
v
PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA). It
allows you to print images taken with any digital camera or video camera, regardless of the manufacturer
or model, by connecting to a printer without using a computer.
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Images Using Digital Camera Specified Settings (DPOF Print)
You can make print settings and select images to print on your digital camera and then print the images all at
once. For details, refer to the user guide included with your digital camera.
Insert a memory card containing DPOF
1
settings into the appropriate memory card slot.
[DPOF images remain Print images?] appears on the
screen.
Label side
Pre
butto
o
2
3
heck the settings.
“Print type” set with the digital camera
: Index
: Standard
Number of sheets required
[Date] and [File No.] set with the digital camera
Print.
4
Press the
p
button to start printing.
The date and file number are the DPOF settings made with the digital camera (these settings cannot be
changed with SELPHY).
If, on a Canon brand digital camera, the [Print Type] is set to [Standard], the settings made in “Printing a
The screen in Step 3 can also be displayed when you press the
button and select [DPOF
k
Print], then press the
button. [DPOF Print] only displays when a memory card is inserted that
o
contains DPOF information set with the digital camera.
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Battery Pack
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 54 sheets* of Postcard size paper.
* The number of possible prints is based on Canon testing standards, and may change depending on printing
conditions.
Installing the Battery
Remove the battery cover.
1
Slide and hold the cover lock (), then remove the cover
towards ().
Air Vents
Remove the baty terminal cover.
2
tach e battery.
3
sert ttab (), then push the battery () until it clicks
d lockinto place.
Charging the Battery
Charging starts and
Charging completes after approximately 4 hours. and
appears on the screen.
disappears.
If you press the
q
button while the battery is charging (p.
appears and
charging resumes.
For cautions concerning the battery, refer to the user guide included with the battery.
When
is displayed and you press any button other than the
button for 3 seconds or
q
longer,
will disappear. When the screen is turned off while the battery is charging and you
button, will appear after approximately 10 seconds.
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.
If a red
appears, the battery has reached the end of its life span. Purchase a new battery.
press any button other than the
q
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing From Your Mobile Phone
Use the Bluetooth unit BU-30 (sold separately) for wireless printing of images taken with a Bluetooth
equipped mobile phone. For details on how to use the mobile phone or on printing methods via Bluetooth
refer to the user guide included with the mobile phone.
Make sure that a memory card is not inserted
1
in SELPHY, and it is not connected to a
computer.
Insert the Bluetooth unit.
2
Remove the cover attached to BU-30 and insert it as
shown.
Transfimageom your mobile phone to
3
SE
Thoth unit blinkblue during data transfer.
Printstarts after data transfer is complete.
Up to apox. 1m (33
During transfer, thue light ohe Bluetooth unit will blink. If transfer is interrupted, the unit will stop
blinking. Follow the ructionsplayed on your mobile phone and try again.
The following conditionuse transfer to slow down or fail, even within a 10 m (33 ft.) range:
- When there is an obstacle between the Bluetooth unit and the mobile phone
- When there is electromagnetic interference from magnetic fields, static electricity, or radio waves in the
area
The maximum file size that can be transferred is 2 – 3 MB (varies depending on mobile phone).
Data transfer time increases when data size is large. Therefore, the amount of time before printing may
also increase.
Depending on the mobile phone model you use, images saved on the memory card may not be printed.
Depending on the color ink cassette/paper set (p. 2) you use, images may print with the edges cut off.
Select Canon CP800 (XX:XX:XX) (X stands for one digit) when selecting a target device name on your
mobile phone.
You cannot establish a wireless connection between a computer and SELPHY.
Movies, e-mail, address book information, or images attached to an e-mail or downloaded from the
Internet cannot be printed.
SELPHY automatically sets the print orientation.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you think there is a problem with SELPHY, first check the following. If the items below do not solve your
problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.
Power
Power will not turn on
• Hold the
q
Printing Problems
Cannot print
• When the ink is spent, replace the ink cassette with a new one. Wn the paper is spent, refill the paper
• Connect SELPHY to only one device at a time. If is conned simultaneously to a digital
camera, computer and has a memory card inseay not be le to print properly.
• Depending on the room temperatuay oheat and temporarily stop operating. This is
not a malfunction. Wait uhe temand inting resumes. If SELPHY is connected to
a computer, a messawill appear oer screen. Do not cancel the print. Wait until printing
resumes.
Cannot display/print iges from emory card or USB flash memory
•
Make sure the memory cd is insed all the way into the correct slot with the label facing upward
• Make sure that any memory card requiring an adapter is inserted into the adapter before being inserted
Printing from digital cameras
• Make sure the battery/batteries in your digital camera are not depleted. If there is insufficient charge,
replace the battery with a fully charged one, or new batteries.
Printing from computers
• Problems Exclusive to Windows: Make sure the printer is not set to offline.
If it is, right-click the printer icon and cancel the offline setting.
Cannot print the date
Printing from memory cards or USB flash memory
If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the
DPOF settings.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing from mobile phones
Printing from digital cameras
• Make sure the date setting in your digital camera is set to [On]. However, if the setting is [Default], the
date imprint settings of SELPHY will be used.
Cannot make clean prints
• Make sure the ink sheet and paper are not dusty.
• Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong magnetic
Colors on the computer display and the print are different
• Color generation methods are different with computer screens and printers. Moreover, the variance may
be attributable to the environment in which the screen is viewed (color and strength of the light), or to the
screen’s color adjustment settings.
After using the computer to cancel a print in progress, an image that had already been printed was
printed again when printing resumed
• When you restart printing on a Macintosh computer after canceling, an already printed image may print
again when printing resumes.
Paper Problems
Paper will not fit into cassette
Paper is not feeding properly/frequems
• Make sure there are less than 19 sssett
• Make sure 19 or more heets have n the outer lid of the paper cassette.
Cannot print the specifinumber prints/paper left over
• Canceling a print in pross or png on the ink sheet will consume ink. If paper runs out while printing
many images, do not remok cassette, as this will consume ink. Instead, refill the paper without
removing the ink cassette.
Paper is jammed
• If the paper is sticking out from the front or back (paper ejection slot) (p. 6) of SELPHY, gently tug on
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to
forcibly pull it out. Turn the printer off and on repeatedly until the paper is ejected.
Error Messages
If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with the error
message, follow the on-screen instructions. If no solution displays, refer to “Troubleshooting” (p. 31).
If these items do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included
customer support list.
If a problem occurs while SELPHY is connected to a digital camera, an error message may appear on
screen of the digital camera.
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SELPHY CP800
Printing Method
Dye-sublimation thermal transfer (with overcoating)
Resolution/Color
Representation
300 x 300 dpi
YMC (256 shades per color, 16.77 million colors per dot (max))
(Resolution based on the “area intensity method” is equivalent to a 4800 x 4800
dpi color representation)*1
Ink
Dedicated color ink cassette (Y/M/C/overcoating)
Paper
Postcard Size, L Size, Card Size (including full page label sheets, 8-label
sheets)
Print Size
Borderless
Bordered
Postcard Size
L Size
100.0 x 148.0 mm (3.94 x 5.83 in.)
89.0 x 119.0 mm (3.50 x 4.69 in.)
54.0 x 86.0 mm (2.13 x 3.39 in.)
22.0 x 17.3 mm (0.87 x 0.68 in.)
91.4 x 121.9 mm (3.60 x 4.80 in.)
79.2 x 105.3 mm (3.12 x 4.15 in.)
50.0 x 66.7 mm (1.97 x 2.63 in.)
Card Size
(per label)
Printing Speed*2
Printing from memory cards/USB flamemory/Connected to cameras
(PictBridge)
Postcard Size
L Size
Card Size
Approx. 47 sec.
Approx. 39 sec.
Approx. 24 sec.
Feeding System
Ejection System
Screen
Automatic paper feed r cassette
Automectioop of paper cassette
Tilt-upLCD lor Monitor
Interface
USB
Connectiidge compliant device: USB compliant Type A connector
Connecting puter: USB compliant Type B connector
Wireless
Blueth*3
Memory Cards
CF (mpactFlash) Card, Microdrive, xD-Picture Card*4, SD Memory Card,
C Memory Card, SDXC Memory Card, MultiMediaCard, MMCplus Card,
HC MMCplus Card, miniSD Memory Card*4, miniSDHC Memory Card*4,
microSD Memory Card*4, microSDHC Memory Card*4, microSDXC Memory
Card*4, RS-MMC Card*4, MMCmobile Card*4, MMCmicro Card, Memory Stick,
Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo, Memory Stick
micro*4
USB Flash Memory
Operating Temperatures
Operating Humidity
Power Source
FAT/exFAT only supported
5 – 40 °C (41 – 104 °F)
20 – 80 %
Compact Power Adapter CA-CP200 W
Battery pack NB-CP2L (sold separately)
Power Consumption
Dimensions
60 W or less (4 W or less on standby)
177.0 x 134.6 x 68.8 mm (6.97 x 5.30 x 2.71 in.)
Approx. 940 g (approx. 33.2 oz.)
Weight (printer only)
1
*
The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per
dot. In comparison, printers using the area intensity method represent shades by the number of dots printed in
a unit of area, i.e. 256 dots (16 dots vertical x 16 dots horizontal) are needed to represent the same 256 shades
of color. SELPHY’s color representation is therefore equivalent to a 4800 x 4800 dpi resolution based on an area
intensity method.
• Gradation refers to the number of shades that can be represented on a print. For example, black and white
has two gradations, while 256 gradations include the shades of gray going from white to black that can be
represented.
• “dpi” refers to the number of dots that can be printed in 1 inch (“dots per inch”).
Measured from start of the yellow printing pass to final output.
2
3
4
*
*
*
Bluetooth unit BU-30 (sold separately) is required.
Dedicated adapter (commercially available) is required.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Power Adapter CA-CP200 W
Rated Input
100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)
Rated Output
Dimensions
24 V DC, 2.2 A
122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.) (excluding power cord)
0 – 45 °C (32 – 113 °F)
Operating Temperatures
Weight
Approx. 310 g (10.9 oz.)
Battery Pack NB-CP2L (Sold Separately)
Type
Rechargeable lithium-ion battery
Nominal Voltage
Nominal Capacity
Battery Life (Charge Cycles)
Operating Temperatures
Dimensions
22.2 V DC
1200 mAh
Approx. 300 times
5 – 40 °C (41 – 104 °F)
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Approx. 230 g (8.11 oz.)
Weight
All data is based on tests by Canon.
Printer specifications or appearance are subject to change without notice.
As an ENERGY STAR Partner, Canon Inc. has dminehat this product meets the ENERGY
STAR guidelines for energy efficiency.
CAUTION
RISK OF EXPLOSION IF BATTERCED Y AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES TO CAL REGULATION.
Handling Pecations
Do not subject the printer to excessive force. Force or impact on the printer may result in paper jams or
equipment damage.
Be careful not to spray the equipment with insecticides or other volatile substances. In addition, do not
store the equipment in contact with rubber or vinyl products for long periods of time. This may cause
deterioration of the casing.
Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not a
malfunction. SELPHY will resume normal printing as soon as it cools down. Temporary stoppages increase
printing time and are most likely to occur when printing continuously, if a room is unusually warm, or if the
air vents on the back of SELPHY are blocked and internal temperature is high.
Avoid condensation on SELPHY when moving it from a cold to a warm place by putting it in an airtight,
sealable plastic bag and allowing for adjustment to temperature changes gradually before removing from
the bag. In the event that condensation does form within SELPHY, keep it at room temperature until the
water droplets evaporate naturally before use.
When SELPHY becomes dirty, wipe the casing with a soft dry cloth.
When dust or dirt has accumulated on the battery cover or vents (pp. 6, 29), be sure to remove the ink
cassette (p. 14) before cleaning. If dust gets in through the vents, the printer may not print cleanly.
Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may cause
deformation or peeling of the casing.
3ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
USA and Canada only:
The Lithium ion/polymer battery is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
FCC Notice
(Printer, Model CD1085, CD1093 Systems)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by ning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of thllowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment an
• Connect the equipment into an outlet on a circuit diffat to whice receiver is connected.
• Consult the dealer or an experienced radchnicilp.
The cable with the ferrite core provided must used with this equipment in order to comply with
Class B limits in Subpart B o15 of
Do not make any changemodifications tment unless otherwise specified in the manual. If such
changes or modifications suld be mad, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Ackowldgments
SDXC Logo is a trademark of SD-3C, LLC.
This device incorporates exFAT technology licensed from Microsoft.
Portions of the code used in this firmware are based in part on the work of the Independent JPEG
Group.
About This Guide
Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission
of Canon is prohibited.
Canon reserves the right to change the contents of this guide at any time without prior notice.
Illustrations and screenshots in this guide may differ slightly from the actual equipment.
The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation
of the products.
This product is designed to achieve excellent performance when used with genuine Canon
accessories. Canon shall not be liable for any damage to this product and/or accidents such as
fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or
explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of
the malfunction of non-genuine Canon accessories, although you may request such repairs on a
chargeable basis.
CDI-E434-020
© CANON INC. 2010
Download from Www.Somanuals.com. All Manuals Search And Download.
|