ENGLISH
INSTRUCTION
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Canon product.
The EOS 1000D is a digital single-lens reflex camera with a 10.10-
megapixel image sensor. The camera provides many features such as
high-speed, 7-point autofocus to quickly focus moving subjects, Picture
Styles to expand your photographic expression, diverse shooting
modes from Full Auto to Creative modes, and Live View shooting.
It also incorporates the EOS Integrated Cleaning System to eliminate
dust spots on images and the Self Cleaning Sensor Unit to shake off
dust on the sensor.
Take a Few Test Shots to Familiarize Yourself with the
Camera
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how
they come out. You can then better understand the camera.
To avoid botched pictures and accidents, read the Safety Warnings
(p.186,187) and Handling Precautions (p.12,13).
Test the Camera Before Using and Liability
After shooting, playback and check whether the image has been
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to the personal computer,
Canon cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.
This camera is compatible with SD memory cards and SDHC
memory cards. This manual will refer to all these cards as just “card.”
* The camera does not come with a card (for recording images).
Please purchase it separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Battery Pack LP-E5
(with protective cover)
Battery Charger
LC-E5/LC-E5E*
Camera
(with eyecup and
body cap)
Wide Strap
EW-100DB III
Interface Cable
IFC-200U
Video Cable
VC-100
EOS DIGITAL
Solution Disk
(Software)
EOS DIGITAL
Software Instruction
Manuals Disk
(1) Instruction Manual (this booklet)
(2) Pocket Guide
Quick start guide to shooting.
(3) CD-ROM Guide
Guide to the bundled software (EOS DIGITAL
Solution Disk) and EOS DIGITAL Software Instruction
Manuals Disk.
* Battery Charger LC-E5 or LC-E5E is provided. (The LC-E5E comes with a
power cord.)
If you purchased the Lens Kit, check that the lens is included.
Depending on the Lens Kit type, the lens instruction manual might
also be included.
Be careful not to lose any of the above items.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Conventions Used in this Manual
Icons in this Manual
<6>
<V> <U> : Indicate the <S> cross keys.
<0> : Indicates the setting button.
: Indicates the Main Dial.
0, 9, 8 : Indicates that the respective function remains active
for 4 sec., 6 sec., or 16 sec. respectively after you let
go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
3 : Indicates a function which can be changed by pressing the
<M> button and changing the setting.
M
: When shown on the upper right of the page, it indicates that the
function is available only in the Creative Zone modes (p.20).
(p.**) : Reference page numbers for more information.
: Tip or advice for better shooting.
: Problem-solving advice.
: Warning to prevent shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is already set to <1>.
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF-S 18-55mm f/3.5-5.6 IS lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapters
For first-time users, chapters 1 and 2 explain the camera’s basic
operations and shooting procedures.
Introduction
2
23
43
Camera basics.
Getting Started
1
Basic Shooting and Image Playback
2
Fully automatic shooting for different subjects.
Advanced Shooting Techniques
55
69
3
Basic shooting features for specific types of subjects.
More Advanced Techniques
4
Advanced shooting techniques.
Live View Shooting
95
5
Shoot while viewing the LCD monitor.
Handy Features
107
6
Convenient menu-based functions.
123
133
151
161
Image Playback
7
8
9
Printing Images and Transferring Images to a Computer
Customizing the Camera
Reference
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Contents
Introduction
Item Check List.................................................................................................. 3
Conventions Used in this Manual...................................................................... 4
Chapters............................................................................................................ 5
Contents at a Glance....................................................................................... 10
Handling Precautions ...................................................................................... 12
Quick Start Guide............................................................................................ 14
Nomenclature.................................................................................................. 16
Getting Started
23
1
Recharging the Battery.................................................................................... 24
Installing and Removing the Battery................................................................ 26
Turning on the Power...................................................................................... 27
Setting the Date and Time............................................................................... 29
Selecting the Interface Language.................................................................... 30
Installing and Removing the Card ................................................................... 31
Mounting and Detaching a Lens...................................................................... 33
About the Lens Image Stabilizer...................................................................... 35
Basic Operation............................................................................................... 36
Menu Operations and Settings........................................................................ 38
Formatting the Card......................................................................................... 40
Switching the LCD Monitor Screen.................................................................. 42
Basic Shooting and Image Playback
43
2
Fully Automatic Shooting................................................................................. 44
Full Auto Techniques....................................................................................... 46
Shooting Portraits............................................................................................ 47
Shooting Landscapes...................................................................................... 48
Shooting Close-ups......................................................................................... 49
Shooting Moving Subjects............................................................................... 50
Shooting Portraits at Night............................................................................... 51
Disabling Flash................................................................................................ 52
Using the Self-timer......................................................................................... 53
Image Playback............................................................................................... 54
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Contents
Advanced Shooting Techniques
55
3
Program AE......................................................................................................56
Changing the ISO Speed .................................................................................57
Using the Built-in Flash ....................................................................................58
Changing the AF Mode ....................................................................................60
Selecting the AF Point......................................................................................61
Continuous Shooting........................................................................................63
Setting the Image-recording Quality.................................................................64
Selecting a Picture Style ..................................................................................67
More Advanced Techniques
69
4
Action Shots.....................................................................................................70
Changing the Depth of Field ............................................................................72
Manual Exposure .............................................................................................75
Automatic Depth-of-Field AE............................................................................76
Changing the Metering Mode...........................................................................77
Setting Exposure Compensation......................................................................78
Auto Exposure Bracketing................................................................................80
Customizing the Picture Style ..........................................................................82
Registering the Picture Style............................................................................85
Setting the Color Space ...................................................................................87
AE Lock............................................................................................................88
FE Lock............................................................................................................89
Setting the White Balance................................................................................90
White Balance Correction ................................................................................92
Preventing Camera Shake...............................................................................94
Live View Shooting
95
5
Preparing for Live View Shooting.....................................................................96
Focusing Manually ...........................................................................................98
Shooting...........................................................................................................99
Using AF to Focus..........................................................................................102
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Contents
Handy Features
107
6
Handy Features............................................................................................. 108
Silencing the Beeper .................................................................................. 108
Card Reminder........................................................................................... 108
Setting the Image Review Time ................................................................. 108
Setting the Auto Power-off Time................................................................. 109
Setting the LCD Monitor Brightness........................................................... 109
File Numbering Methods .............................................................................110
Auto Image Rotation....................................................................................112
Checking Camera Function Settings...........................................................113
Reverting the Camera to the Default Settings.............................................114
Setting the LCD Monitor Off/On ..................................................................115
Changing the Shooting Settings Screen Color............................................115
Flash Control................................................................................................. 116
Automatic Sensor Cleaning........................................................................... 118
Appending Dust Delete Data......................................................................... 119
Manual Sensor Cleaning............................................................................... 121
Image Playback
123
7
Searching for Images Quickly........................................................................ 124
Magnified View.............................................................................................. 126
Rotating the Image........................................................................................ 126
Auto Playback ............................................................................................... 127
Viewing the Images on TV............................................................................. 128
Protecting Images ......................................................................................... 129
Erasing Images ............................................................................................. 130
Shooting Information Display......................................................................... 131
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Contents
Printing Images and Transferring Images to a Computer
133
8
Preparing to Print ...........................................................................................134
Printing...........................................................................................................136
Digital Print Order Format (DPOF).................................................................143
Direct Printing with DPOF ..............................................................................146
Transferring Images to a Personal Computer................................................147
Customizing the Camera
151
9
Setting Custom Functions..............................................................................152
Custom Function Settings..............................................................................154
Registering My Menu .....................................................................................160
Reference
161
10
When Autofocus Fails ....................................................................................162
Using a Household Power Outlet...................................................................163
Using the Remote Switch...............................................................................164
External Speedlites ........................................................................................166
Menu Settings ................................................................................................168
Function Availability Table .............................................................................170
Troubleshooting Guide...................................................................................172
Error Codes....................................................................................................175
System Map ...................................................................................................176
Specifications.................................................................................................178
Index ..............................................................................................................189
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Contents at a Glance
Shooting
Shoot automatically
Î p.43 - 52 (Basic Zone modes)
Shoot continuously
Î p.47, 50, 63 (i Continuous shooting)
Take a picture of myself in a group Î p.53 (j Self-timer)
Freeze the action
Take a blurred action shot
Î p.70 (s Shutter-priority AE)
Blur the background
Keep the background in sharp focus Î p.72 (f Aperture-priority AE)
Adjust the image brightness (exposure) Î p.78 (Exposure compensation)
Shoot under low light
Shoot without flash
Î p.44, 57, 58 (Flash photography)
Î p.52 (7 Flash Off)
Photograph fireworks at night Î p.75 (Bulb exposure)
Shoot while viewing the LCD monitor Î p.96 (Live View shooting)
Image Quality
Set the image effects to match the subject Î p.67 (Selecting a Picture Style)
Make a large size print of the picture Î p.64 (73, 83, 1)
Take many pictures
Î p.64 (76, 86)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Focusing
Change the point of focus
Shoot a moving subject
Î p.61 (S AF point selection)
Î p.50, 60 (AI Servo AF)
Playback
View the images with the camera Î p.54 (x Playback)
Search for pictures quickly
Î p.124 (H Index display)
Prevent important images
from accidental deletion
Î p.129 (K Image protect)
Î p.130 (L Delete)
Delete unnecessary images
View the images on a TV set
Set the LCD brightness
Î p.128 (Video OUT)
Î p.109 (LCD brightness)
Printing
Print pictures easily
Î p.133 (Direct printing)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
the camera body or lens. For stubborn dirt, take the camera to the nearest
Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using the camera. If you have not used the camera for some time or if
there is an important shoot coming up, have the camera checked by your
Canon dealer or check the camera yourself and make sure it is working
properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Handling Precautions
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporarily and will disappear when the camera is left unused for a few
days.
Cards
Cards are precision devices. Do not drop the card or subject it to vibration.
Doing so could damage the images recorded on them.
Do not store or use the card near anything having a strong magnetic field
such as a TV set, speakers, or magnet. Also avoid places prone to having
static electricity. Otherwise, the images recorded on the card might be lost.
Do not leave the card in direct sunlight or near a heat source. Doing so can
warp the cards and make them unusable.
Do not spill any liquid onto the card.
Always store your cards in a case to protect the data stored on them.
Do not bend the card or subject it to any excessive force or physical shock.
Do not store the card in hot, dusty, or humid locations.
Lens Electrical Contacts
Contacts
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Cautions During Prolonged Use
When you shoot continuously for a prolonged period or use Live View shooting
for a long period, the camera may become hot. Although this is not a
malfunction, holding the hot camera for a long period can cause slight skin
burns.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Quick Start Guide
Insert the battery. (p.26)
To recharge the battery, see page 24.
1
Attach the lens. (p.33)
For EF-S lens
For EF lens
When attaching an EF-S lens, align it
with the white index on the camera.
For other lenses, align it with the red
index.
2
3
4
5
Set the lens focus mode switch
to <AF>. (p.33)
Open the slot cover and
insert a card. (p.31)
With the card’s label facing
you, insert it into the slot.
Set the power switch to <1>.
(p.27)
When the LCD monitor displays the
Date/Time setting screen, see page
29.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Quick Start Guide
Set the Mode Dial to <1> (Full
Auto). (p.44)
All the necessary camera settings will
be set automatically.
6
7
Focus the subject. (p.37)
Look through the viewfinder and aim
the viewfinder center over the subject.
Press the shutter button halfway, and
the camera will focus the subject.
Take the picture. (p.37)
Press the shutter button completely to
take the picture.
8
9
Review the picture. (p.108)
The captured image will be displayed
for about 2 sec. on the LCD monitor.
To display the image again, press the
<x> button. (p.54)
The shooting settings displayed on the LCD monitor turns off when
you press the shutter button halfway or press the <B> button.
To delete an image, see “Erasing Images” (p.130).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Nomenclature
The names in bold indicate the parts explained up until the “Basic
Shooting and Image Playback” section (up to p.54).
Mode Dial (p.20)
Built-in flash/AF-assist beam
(p.58/116)
Power switch (p.27)
EF Lens mount index (p.33)
EF-S Lens mount index (p.33)
Flash-sync contacts
<Z> ISO speed
set button (p.57)
<6> Main Dial
(p.4)
Hot shoe (p.166)
<V> Focal plane
mark (p.49)
Shutter button
(p.37)
Strap mount
(p.22)
Red-eye
reduction/
Self-timer lamp
(p.59/53)
<D> Flash
button (p.58)
Terminal cover
Grip
Lens release
button (p.34)
Mirror (p.94,121)
Contacts (p.13)
Lens mount
Depth-of-field
preview button
(p.74)
Lens lock pin
EF-S 18-55mm f/3.5-5.6 IS / II lens
Focusing ring
(p.62)
Hood EW-60C
(sold separately)
mount
Video OUT
terminal (p.128)
Zoom ring (p.34)
58 mm filter thread
(front of lens)
Remote control
terminal (p.164)
Focus mode
Digital terminal
(p.134,147)
switch (p.33)
Image Stabilizer
switch (p.35)
Lens mount index (p.33)
Contacts (p.13)
* The EF-S 18-55mm f/3.5-5.6 II lens does not have an Image Stabilizer switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Nomenclature
Dioptric adjustment knob (p.36)
Eyecup (p.165)
<O> Aperture/Exposure
compensation button (p.75/78)
<A/I> AE lock/
FE lock button/
Viewfinder eyepiece
Index/Reduce button
(p.88/89/124/126,141)
<B> Shooting
settings display/
Trimming orientation
button (p.42,113/141)
<S/u>
AF point selection/
Magnify button
(p.61/126,141)
<M> Menu
button (p.38)
<l/B>
Print/Share button/
White balance
selection button
(p.139,148/90)
Card slot
cover (p.31)
DC cord hole
(p.163)
LCD monitor (p.38,109)
Access lamp (p.32)
Tripod socket
Battery compartment
<x> Playback button (p.54)
cover release lever (p.26)
Battery compartment cover
<0> Setting button/
Shooting settings display (p.38/42)
(p.26)
<L> Erase button (p.130)
<S> Cross keys (p.38)
<Wq> Metering mode/Jump selection button (p.77/125)
<XA> Picture Style selection button (p.67)
<Yi/j> Drive mode selection button (p.53,63)
<ZE>
AF mode selection button (p.60)
Card slot (p.31)
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Nomenclature
Shooting Settings Display
Shutter speed
Main Dial pointer (p.69)
Exposure level indicator
Aperture
Exposure compensation
amount (p.78)
ISO speed (p.57)
AEB range (p.80)
White balance (p.90)
QAuto
Flash exposure
compensation (p.79)
W Daylight
y Built-in flash
EShade
External Speedlite
RCloudy
Y Tungsten light
Shooting mode
U White fluorescent
light
Drive mode
(p.53,63)
I
Flash
u
i
Single shooting
O Custom
Continuous
shooting
2White balance
correction (p.92)
10-sec. self-timer
B White balance
bracketing (p.93)
l 2-sec. self-timer
q Continuous shots after
self-timer
Shots remaining
Shots remaining during
WB bracketing
Battery check (p.28)
Self-timer countdown
zxcn
Bulb exposure time
Picture Style (p.67)
AF mode (p.60)
X One-Shot AF
9 AI Focus AF
Z AI Servo AF
Image-recording quality (p.64)
73
83
74
84
76
86
1
Large/Fine
Large/Normal
Medium/Fine
Medium/Normal
Small/Fine
g
Manual Focusing
Metering mode (p.77)
q Evaluative metering
w Partial metering
Small/Normal
RAW
e Center-weighted average metering
1+73 RAW+Large/Fine
The display will show only the settings currently applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Nomenclature
Viewfinder Information
AF point display indicator < >
Focusing screen
AF points
<Z>
ISO speed
<A> AE lock/
<o> Focus
confirmation
light
AEB in-progress
Max. burst
White balance correction
ISO speed
<0> Monochrome shooting
Exposure level indicator
<D> Flash-ready
Improper FE lock
warning
<e> High-speed sync
(FP flash)
<d> FE lock/
FEB in-progress
Exposure compensation amount
AEB range
<y> Flash exposure
compensation
Red-eye reduction lamp-on indicator
Aperture
Shutter speed
Card full warning (FuLL)
Card error warning (Err)
No card warning (Card)
FE lock (FEL)
Busy (buSY)
Built-in flash recycling (D buSY)
The display will show only the settings currently applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Nomenclature
Mode Dial
The Mode Dial has the Basic Zone modes and Creative Zone modes.
Creative Zone
These modes give you more control
over the result.
d
: Program AE (p.56)
s
f
a
: Shutter-priority AE (p.70)
: Aperture-priority AE (p.72)
: Manual exposure (p.75)
8 : Automatic depth-of-field
AE (p.76)
Full Auto
Basic Zone
All you do is press the shutter button. Fully
automatic shooting for specific kinds of
subjects.
1: Full Auto (p.44)
Image Zone
2 : Portrait (p.47)
3: Landscape (p.48)
4 : Close-up (p.49)
5: Sports (p.50)
6 : Night Portrait (p.51)
7: Flash Off (p.52)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Nomenclature
Battery Charger LC-E5
Power plug
Charge lamp
Battery pack slot
This power unit is intended to be correctly orientated in a vertical or
floor mount position.
Battery Charger LC-E5E
Battery pack slot
Power cord
Charge lamp
Power cord socket
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Nomenclature
Attaching the Strap
Pass the end of the strap through the
camera’s strap mount eyelet from the
bottom. Then pass it through the strap’s
buckle as shown in the illustration. Pull the
strap to take up any slack and make sure the
strap will not loosen from the buckle.
The eyepiece cover is also attached to
the strap. (p.165)
Eyepiece cover
Download from Www.Somanuals.com. All Manuals Search And Download.
22
1
Getting Started
This chapter explains preliminary steps and basic
camera operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Recharging the Battery
Remove the protective cover.
1
2
3
Attach the battery.
As shown in the illustration, attach the
battery securely.
To detach the battery, follow the
above procedure in reverse.
LC-E5
Recharge the battery.
For LC-E5
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E5E
LC-E5E
Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the charge lamp turns orange.
X When the battery is fully recharged,
the charge lamp will turn green.
It takes about 2 hours to fully
recharge a completely exhausted
battery.
The time required to recharge the
battery depends on the ambient
temperature and battery’s charge
level.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Recharging the Battery
Tips for Using the Battery and Charger
Recharge the battery on the day before or on the day it is to be
used.
Even during non-use or storage, a charged battery will gradually
discharge and lose its power.
After recharging the battery, detach it and unplug the charger
from the power outlet.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Store the battery with the protective cover
attached. Storing the battery after it is fully charged can lower the
battery’s performance.
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has worn out.
Purchase a new battery.
Do not charge any battery other than Battery Pack LP-E5.
Battery Pack LP-E5 is dedicated to Canon products only. Using it with an
incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Installing and Removing the Battery
Installing the Battery
Load a fully charged Battery Pack LP-E5 into the camera.
Open the battery compartment
cover.
Slide the lever as shown by the arrow
1
2
3
and open the cover.
Insert the battery.
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
Close the cover.
Press the cover until it snaps shut.
Removing the Battery
Open the cover and remove the
battery.
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent shorting, be sure to attach
the protective cover to the battery.
After opening the battery compartment cover, be careful not to swing it back
further. Otherwise, the hinge might break.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Turning on the Power
When you turn on the power switch and the date/time setting screen
appears, see page 29 to set the date/time.
<1> : The camera turns on.
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
About the Automatic Self-Cleaning Sensor
Whenever you set the power switch to <1> or <2>, the sensor
cleaning will be executed automatically. During the sensor cleaning,
the LCD monitor will display <f>. Even during the sensor
cleaning, you can still shoot by pressing the shutter button halfway
(p.37) to stop the sensor cleaning and take a picture.
If you turn on/off the power switch <1>/<2> at a short interval,
the <f> icon might not be displayed. This is normal and not a
problem.
About Auto Power Off
To save battery power, the camera turns off automatically after
about 30 seconds of non-operation. To turn on the camera again,
just press the shutter button.
You can change the auto power-off time with the menu’s [5 Auto
power off] setting. (p.109)
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Turning on the Power
Checking the Battery Level
When the power switch is set to <1>, the battery level will be
indicated in one of four levels:
z : Battery level OK.
x : Battery level is slightly down,
but adequate power remains.
c : Battery will be exhausted soon.
n : Battery must be recharged.
Battery Life
Temperature
[Approx. number of shots]
Shooting Conditions
No Flash
600
50% Flash Use
At 23°C / 73°F
At 0°C / 32°F
500
400
500
The figures above are based on a fully-charged LP-E5, no Live View shooting,
and CIPA (Camera & Imaging Products Association) testing standards.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
The lens operation is powered by the camera’s battery. Using certain
lenses can reduce the number of possible shots.
Using the Image Stabilizer of the lens will decrease the number of
possible shots (shorter battery life).
For battery life with Live View shooting, see page 100.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
3 Setting the Date and Time
When you turn on the power for the first time or if the date/time has
been reset, the Date/Time setting screen will appear. Follow steps 3
and 4 to set the date/time. Note that the date/time appended to
recorded images will be based on this Date/Time setting. Be sure
to set the date/time.
Display the menu.
Press the <M> button to display
1
the menu.
Under the [6] tab, select [Date/
2 Time].
Press the <U> key to select the
[6] tab.
Press the <V> key to select [Date/
Time], then press <0>.
Set the date and time.
3
Press the <U> key to select the
date or time number.
Press <0> so
Press the <
then press <
is displayed.
> key to set the number,
V
0
>. (returns to
.)
Exit the menu.
Press the <U> key to select [OK],
then press <0>.
4
X The date/time will be set.
Press the <M> button to return
to the shooting settings display.
The date/time set will start from when you press <0> in step 4.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the date/time might be reset. If this happens, set
the date/time again.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
3 Selecting the Interface Language
Display the menu.
Press the <M> button to display
1
the menu.
Under the [6] tab, select
2 [Language].
Press the <U> key to select the
[6] tab.
Press the <V> key to select
[Language] (the third item from the
top), then press <0>.
Select the desired language.
3
Press the <S> key to select the
desired language, then press <0>.
X The menu language will change.
Press the <M> button to return
to the shooting settings display.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Installing and Removing the Card
The captured image is recorded onto the card (sold separately).
Make sure the card’s write protect switch is set upward to
enable writing/erasing.
Installing the Card
Open the cover.
Slide the cover as shown by the
1
arrow to open it.
Insert the Card.
Card’s write
protect switch
2
3
As shown by the illustration, face
the card’s label side toward you
and insert it until it clicks in place.
Close the cover.
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
When you set the power switch to
<1>, the number of remaining
shots will be displayed on the LCD
monitor.
Shots remaining
The shots remaining depends on the remaining capacity of the card,
image-recording quality, ISO speed, etc.
The [1 Shoot w/o card] menu option set to [Off] will prevent you from
forgetting to install a card. (p.108)
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Installing and Removing the Card
Removing the Card
Open the cover.
1
Set the power switch to <2>.
Check that “Recording...” is not
displayed on the LCD monitor.
Make sure the access lamp is off,
then open the cover.
Access lamp
Remove the card.
Gently push in the card, then let go.
The card will stick out.
2
Pull the card straight out, then close
the cover.
When the access lamp is lit or blinking, it indicates that the images
are being written to or read by the card, being erased, or data is
being transferred. While the access lamp is lit or blinking, never do
any of the following. Doing so may damage the image data. It may
also damage the card or camera.
•
•
•
Opening the card slot cover.
Opening the battery compartment cover.
Shaking or banging the camera around.
If the card already contains recorded images, the image number might
not start from 0001. (p.110)
Do not touch the card’s contacts with your fingers or metal objects.
If a card-related error message is displayed on the LCD monitor, remove
and reinstall the card. If the error persists, use a different card.
If you can transfer all the images in the card to a personal computer,
transfer all the images and then format the card (p.40). The card may
then return to normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
Remove the rear lens cap and the
1
body cap by turning them as shown
by the arrow.
EF-S lens mount index
Attach the lens.
2
Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.
When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens mount index.
EF lens mount index
On the lens, set the focus mode
3 switch to <AF> (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
Remove the front lens cap.
4
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Mounting and Detaching a Lens
About Zooming
To zoom, turn the zoom ring on the lens
with your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then
detach it.
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
Image Conversion Factor
Since the image size is smaller
than the 35mm film format, it will
Image size
(22.2 x 14.8mm / 0.87 x 0.58 in.)
look like the lens focal length is
increased by 1.6x.
35mm image size
(36 x 24mm / 1.42 x 0.94 in.)
Download from Www.Somanuals.com. All Manuals Search And Download.
34
About the Lens Image Stabilizer
The procedure explained here is based on the EF-S 18-55mm f/3.5-5.6
IS lens as an example.
* IS stands for Image Stabilizer.
* The EF-S 18-55mm f/3.5-5.6 II lens does not have an Image Stabilizer switch.
Set the IS switch to <1>.
1
Set the camera’s power switch to
<1>.
Press the shutter button halfway.
2
X The Image Stabilizer will operate.
Take the picture.
When the picture looks steady in the
3
viewfinder, press the shutter button
completely to take the picture.
The Image Stabilizer is not effective for moving subjects.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
The Image Stabilizer can operate with the focus mode switch set to
either <f> or <g>.
If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to <2>.
The Image Stabilizer can operate even when the camera is mounted on
a monopod.
Some IS lenses enable you to switch the IS mode manually to suit the
shooting conditions. However, the EF-S 18-55mm f/3.5-5.6 IS lens
switches the IS mode automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Basic Operation
Adjusting the Viewfinder Clarity
Turn the dioptric adjustment
knob.
Turn the knob left or right so that the
seven AF points in the viewfinder look
sharp.
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, sold separately) is
recommended.
Holding the Camera
To obtain sharp images, hold the camera still to minimize camera
shake.
Horizontal shooting
Vertical shooting
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. Press the camera against your face and look through the viewfinder.
6. To maintain a stable stance, place one foot in front of the other.
For shooting while looking at the LCD monitor, see page 95.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and
automatic exposure metering that sets
the shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder.
(0)
Pressing completely
This releases the shutter and takes the
picture.
Preventing Camera Shake
Camera movement during the moment of exposure is called camera
shake. Camera shake can cause blurred pictures. To prevent camera
shake, note the following:
•
•
Hold and steady the camera as shown on the previous page.
Press the shutter button halfway to autofocus, then press the
shutter button completely.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Menu Operations and Settings
By setting various optional settings with the menus, you can set the image-
recording quality, date/time, etc. While looking at the LCD monitor, you use the
<M
> button, <S
> cross keys, and <
0
> button on the camera back.
<M> button
<0> button
LCD monitor
<S> Cross keys
Basic Zone Mode Menu Screen
*
The [2/7/9] tabs are not displayed in the Full Auto and Basic Zone modes.
When a Basic Zone mode is set, there are menu items which are not displayed.
Creative Zone Mode Menu Screen
5 Set-up
9 My Menu
3 Playback
1 Shooting
Tab
Menu settings
Menu items
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Menu Operations and Settings
Menu Setting Procedure
Display the menu.
Press the <M> button to display
1
the menu.
Select a tab.
Press the <U> key to select a
menu tab.
2
You can also turn the <6> dial to
select a tab.
Select a menu item.
Press the <V> key to select the
menu item, then press <0>.
3
Select the setting.
4
Press the <V> or <U> key to
select the setting. (Some settings
require you to press either the <V>
or <U> key to select it.)
Some menu items will indicate the
current setting in blue.
Set the desired setting.
Press <0> to set it.
5
6
Exit the menu.
Press the <M> button to return
to the shooting settings display.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
A list of menu functions is on page 168.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
3 Formatting the Card
If the card is new or was previously formatted by another camera or
personal computer, format the card with the camera.
Formatting the card will erase everything in the card. Even
protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer the images to
a personal computer before formatting the card.
Select [Format].
Under the [5] tab, select [Format],
1
then press <0>.
Format the card.
2
Select [OK], then press <0>.
X The card will be formatted.
X When the formatting is completed,
the menu will reappear.
For low-level formatting, press the
<L> button, checkmark [Low level
format] with <X>, then select [OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
40
3 Formatting the Card
About Low-level Formatting
Do low-level formatting if the card’s recording or reading speed seems
slow.
Since low-level formatting will erase all recordable sectors in the card, the
formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will have been completed and you can use the
card as usual.
When the card is formatted, only the file management information is
changed. The actual data is not completely erased. Be aware of this when
selling or discarding the card. When discarding the card, execute low-level
formatting or destroy the card physically to prevent the data from being
leaked.
The card’s capacity displayed on the format screen may be lower than the
capacity indicated on the card.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Switching the LCD Monitor Screen
The LCD monitor can display the shooting settings screen, menu
screen, image, etc.
Shooting Settings
The shooting settings are displayed
when the camera is turned on.
The display turns off when you
press the shutter button halfway
(p.37). When you let go of the
shutter button, the display turns
on again.
You can also turn off the display
by pressing the <B> button or
<0>. Display it again by pressing the
button again.
Menus
Captured Image
Appears when you press the
<M> button. Press the
button again to return to the
previous screen.
Appears when you press the
<x> button. Press the button
again to return to the previous
screen.
With the [5 LCD off/on btn] menu, you can set the method for turning
the shooting settings display on or off. (p.115)
While the menu or captured image is displayed, you can immediately
return to shooting by pressing the shutter button.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
2
Basic Shooting and
Image Playback
This chapter explains how to use the Basic Zone modes
on the Mode Dial for best results and how to playback
images.
With the Basic Zone modes, all you do is point and shoot and
the camera sets everything automatically. Also, to prevent
botched pictures due to mistaken operations, shooting settings
cannot be changed in the Basic Zone modes. The settings
(functions set automatically) which cannot be set by the user
are grayed out.
Full Auto
e
About the Auto Lighting Optimizer
In Basic Zone modes, the Auto Lighting Optimizer will operate to
adjust the image automatically to obtain the optimum brightness and
contrast. It is also set by default in Creative Zone modes (p.156).
Download from Www.Somanuals.com. All Manuals Search And Download.
43
1 Fully Automatic Shooting
Set the Mode Dial to <1>.
1
AF point
Aim any AF point over the
2 subject.
All the AF points will operate, and
focus will generally be achieved at
the AF point covering the closest
object.
Aiming the center AF point over the
subject will make focusing easier.
Focus the subject.
Press the shutter button halfway, and
the lens will move to focus.
3
X The dot inside the AF point achieving
focus flashes briefly in red. At the
same time, the beeper will sound and
the focus confirmation light <o> in
the viewfinder will light.
X If necessary, the built-in flash will pop-
up automatically.
Focus confirmation light
Take the picture.
Press the shutter button completely to
take the picture.
4
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
1 Fully Automatic Shooting
FAQ
The focus confirmation light <
o
> blinks and focus is not achieved.
Aim the AF point over an area having good contrast between light
and dark, then press the shutter button halfway. (p.162) If you are
too close to the subject, move away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points. As long as
the AF point covering the desired subject flashes, you can take the picture.
The beeper continues to beep softly. (The focus confirmation
light <o> also does not light.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus confirmation light <o> does not light.) While the
beeper is beeping, you can press the shutter button completely to
shoot a moving subject in focus.
Pressing the shutter button halfway will not focus the subject.
When the focus mode switch on the lens is set to <MF> (Manual Focus),
the camera does not focus. Set the focus mode switch to <AF>.
Although it is daylight, the flash popped up.
For a backlit subject, the flash may pop up to help reduce harsh
shadows on the subject.
In low light, the built-in flash fired a series of flashes.
To assist the autofocusing, pressing the shutter button halfway may
trigger the built-in flash to fire a series of flashes. This is called AF-
assist beam. It is effective up to approx. 4 meters/13.1 feet away.
Although flash was used, the picture came out dark.
The subject was too far away. The subject should be within 5
meters/16.4 feet from the camera.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The subject was too close to the camera, and a shadow was created
by the lens. The subject should be at least 1 meter/3.3 feet away
from the camera. If a hood has been attached to the lens, remove it
before taking the flash picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
1 Full Auto Techniques
Recomposing the Shot
Depending on the scene, position the subject toward the left or right to
create a balanced background and good perspective.
In the <1> (Full Auto) mode, while you press the shutter button
halfway to focus a still subject, the focus will be locked. You can then
recompose the shot and press the shutter button completely to take the
picture. This is called “focus lock”. Focus lock is also possible in other
Basic Zone modes (except <5> Sports).
Shooting a Moving Subject
In the <1> (Full Auto) mode, if the subject moves (distance to camera
changes) during or after you focus, AI Servo AF will take effect to focus
the subject continuously. As long as you keep aiming the AF point on
the subject while pressing the shutter button halfway, the focusing will
be continuous. When you want to take the picture, press the shutter
button completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
2 Shooting Portraits
The <2> (Portrait) mode blurs the background to make the human
subject stand out. It also makes flesh tones and the hair look softer than
with the <1> (Full Auto) mode.
Shooting Tips
The farther the distance between the subject and background,
the better.
The farther the distance between the subject and background, the
more blurred the background will look. The subject will also stand
out better in front of a plain, dark background.
Use a telephoto lens.
If you have a zoom lens, use the telephoto end to fill the frame with
the subject from the waist up. Move in closer if necessary.
Focus the face.
Check that the AF point covering the face flashes in red.
If you hold down the shutter button, you can shoot continuously to obtain
different poses and facial expressions. (max. approx. 3 shots/sec.)
If necessary, the built-in flash will pop-up automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
3 Shooting Landscapes
Use the <3> (Landscape) mode for wide scenery, night scenes, or to
have everything in focus from near to far. The greens and blues also
become more vivid and sharp than with <1> (Full Auto).
Shooting Tips
With a zoom lens, use the wide-angle end.
When using a zoom lens, use the wide-angle end. This will have
objects near and far in focus, better than at the telephoto end. It also
adds breadth to landscapes.
Shooting night scenes.
Since the built-in flash will be disabled, this
mode is also good for night scenes. Use a
tripod to prevent camera shake. If you want
to photograph a person against a night
scene, set the Mode Dial to <6> (Night
Portrait) and use a tripod. (p.51)
Download from Www.Somanuals.com. All Manuals Search And Download.
48
4 Shooting Close-ups
When you want to photograph flowers or small things up close, use the
<4> (Close-up) mode. To make small things appear much larger, use a
macro lens (sold separately).
Shooting Tips
Use a simple background.
A simple background makes the flower, etc., stand out better.
Move to the subject as close as possible.
Check the lens for its minimum focusing distance. Some lenses
have indications such as <40.25m/0.8ft>. The lens minimum
focusing distance is measured from the <V> (focal plane) mark on
the camera to the subject. If you are too close to the subject, the
focus confirmation light <o> will blink.
Under low light, the built-in flash will fire. If you are too close to the
subject and the bottom of the picture looks dark, move away from
the subject.
With a zoom lens, use the telephoto end.
If you have a zoom lens, using the telephoto end will make the
subject look larger.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
5 Shooting Moving Subjects
To photograph a moving subject, whether it is a child running or a
moving vehicle, use the <5> (Sports) mode.
Shooting Tips
Use a telephoto lens.
Using a telephoto lens is recommended so you can shoot from afar.
Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter
button halfway to auto focus. During autofocusing, the beeper will
continue beeping softly. If focus cannot be achieved, the focus
confirmation light <o> will blink.
When you want to take the picture, press the shutter button
completely. If you hold down the shutter button, continuous shooting
(max. approx. 3 shots per sec.) and autofocusing will take effect.
Under low light if camera shake is prone to occur, the viewfinder’s shutter
speed display on the bottom left will blink. Hold the camera steady and
shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
6 Shooting Portraits at Night
To shoot someone at night and obtain a natural-looking exposure in the
background, use the <6> (Night Portrait) mode.
Shooting Tips
Use a wide-angle lens and a tripod.
When using a zoom lens, use the wide-angle end to obtain a wide
night view. Use a tripod to prevent camera shake.
Keep the person within 5 meters/16.4 feet from the camera.
Under low light, the built-in flash will fire automatically to obtain a
good exposure of the person. The effective distance of the built-in
flash is 5 meters/16.4 feet from the camera.
Shoot also with <1> (Full Auto).
Since camera shake is prone to occur with night shots, shooting also
with <1> (Full Auto) is recommended.
Tell the subject to keep still even after the flash fires.
If the self-timer is also used, the self-timer lamp will flash after the picture
is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
7 Disabling Flash
In places where flash photography is prohibited, use the <7> (Flash
Off) mode. This mode is also effective for candlelight scenes when you
want to obtain the candlelight effect.
Shooting Tips
If the numeric display in the viewfinder blinks, take care to
prevent camera shake.
Under low light when camera shake is prone to occur, the
viewfinder’s shutter speed display will blink. Hold the camera steady
or use a tripod. When using a zoom lens, use the wide-angle end to
reduce blur caused by camera shake.
Taking portraits without flash.
Under low light, the person must not move until the picture is taken.
If the person moves during the exposure, he or she might look
blurred in the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
j Using the Self-timer
Press the <Yij> button.
1
2
Select the self-timer.
Press the <U> key to select the
desired self-timer, then press <0>.
: 10-sec. self-timer
l: 2-sec. self-timerN (p.94)
q: 10-sec. self-timer plus
continuous shots
Press the <V> key to set the
number of multiple shots (2 to 10)
to be taken with the self-timer.
Take the picture.
Focus the subject and press the
shutter button completely.
3
X You can check the self-timer
operation with the self-timer lamp,
beeper, and countdown display (in
seconds) on the LCD monitor.
X Two seconds before the picture is
taken, the self-timer lamp will stay on
and the beeper will sound faster.
With <q>, the interval between the multiple shots may be prolonged
depending on the image-recording quality and flash.
After taking the self-timer shots, you should check the image(s) for
proper focus and exposure (p.54).
If you will not look through the viewfinder when you press the shutter button,
attach the eyepiece cover (p.165). If stray light enters the viewfinder when
you press the shutter button, it may throw off the exposure.
When using the self-timer to shoot only yourself, use focus lock (p.46) for
an object at about the same distance as where you will be.
To cancel the self-timer after it starts, press the <Yij> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
x Image Playback
The easiest way to playback images is explained below. For more
details on image playback methods, see page 123.
Playback the image.
When you press the <x> button, the
1
last captured image will be displayed.
Select the image.
To view images starting with the last
image, press the <Y> key.
To view images starting with the first
(oldest) image, press the <Z> key.
Press the <B> button to change
the display format.
2
Single image display
Single image display + Image-recording quality
Shooting information display
Histogram display
Exit the image playback.
3
Press the <x> button to exit the
image playback and return the
shooting settings display.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
3
Advanced Shooting
Techniques
In the Basic Zone modes, to prevent spoiled shots,
most functions are set automatically and cannot be
changed. In the <d> (Program AE) mode, you can set
various functions and be more creative.
In the <d> (Program AE) mode, the camera sets the
shutter speed and aperture automatically to obtain the
standard exposure.
The difference between the Basic Zone modes and <d> is
explained on page 170.
*
*
<d> stands for Program.
AE stands for Auto Exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
d: Program AE
To obtain a good exposure of the subject, the camera sets the exposure
(shutter speed and aperture) automatically. This is called Program AE.
Set the Mode Dial to <d>.
1
Take the picture.
Press the shutter button halfway and
2
the camera will focus.
X The exposure setting (shutter speed
and aperture) set automatically is
displayed in the viewfinder.
Press the shutter button completely.
Shooting Tips
Changing the ISO speed and using the built-in flash.
To match the subject and lighting level, you can change the ISO
speed (p.57) or use the built-in flash (p.58). In the <d> mode, the
built-in flash will not fire automatically. So under low light, press the
<I> (Flash) button to pop-up the flash.
The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). After you take the picture, the program shift will be
canceled. Program shift is not possible with flash.
In very low light or very bright light, the shutter speed and
aperture display will blink when you press the shutter
button halfway, as shown in the figure. In low light (30"
3.5), either increase the ISO speed (p.57) or use flash
(p.58). In bright light (4000 22), decrease the ISO speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Z: Changing the ISO SpeedN
Set the ISO speed (image sensor’s sensitivity to light) to suit the
ambient light level. In the Basic Zone modes, the ISO speed is set
automatically.
Press the <Z> button. (9)
X [ISO speed] will appear.
1
Select the ISO speed.
2
Turn the <6> dial or press the
<V> key to select the ISO speed.
You can also look at the ISO speed in
the viewfinder while turning the
<6> dial.
ISO Speed Guide
ISO Speed
100/200
400/800
1600
Normal (No flash)
Sunny outdoors
Flash Range
The higher the ISO speed, the
farther the flash range will be.
(p.58)
Overcast skies, evening
Night or dark indoors
About Auto ISO
This mode sets the ISO speed automatically between ISO 100 - 800 to
suit the shooting mode and ambient light level. For flash and <a>
(manual) exposures, ISO 400 is set. When you press the shutter button
halfway, the automatically-set ISO speed is displayed in the viewfinder
and on the LCD monitor.
Using a high ISO speed or shooting in high-temperature conditions may
result in more grainy images. Long exposures can also cause irregular
colors in the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
D Using the Built-in Flash
In indoors, low light, or backlit conditions, just pop-up the built-in flash
and press the shutter button to take flash pictures. In the <d> mode,
the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to
prevent camera shake.
Press the <D> button.
1
In Creative Zone modes, you can
press the <D> button anytime to take
flash pictures.
While the flash is recycling, “DbuSY”
is displayed in the viewfinder, and
[BUSYD] is displayed on the LCD
monitor.
Press the shutter button halfway.
2
In the bottom left of the viewfinder,
check that the <D> icon is lit.
Take the picture.
When focus is achieved and you
3
press the shutter button completely,
the flash will fire for the picture.
Effective Flash Range
[Approx. in meters / feet]
EF-S 18-55mm f/3.5-5.6 IS / II
ISO Speed
Wide Angle: 18mm
Telephoto: 55mm
1 - 2.3 / 3.3 - 7.5
1 - 3.3 / 3.3 - 10.8
1 - 4.6 / 3.3 - 15.1
1 - 6.6 / 3.3 - 21.7
1 - 9.3 / 3.3 - 30.5
100
200
1 - 3.7 / 3.3 - 12.1
1 - 5.3 / 3.3 - 17.4
1 - 7.4 / 3.3 - 24.3
1 - 10.5 / 3.3 - 34.4
1 - 14.9 / 3.3 - 48.9
400/Auto
800
1600
Download from Www.Somanuals.com. All Manuals Search And Download.
58
D Using the Built-in Flash
Shooting Tips
If the subject is far away, increase the ISO speed.
By increasing the ISO speed, you can extend the flash range.
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO
speed.
Detach the lens hood and keep at least 1 meter/3.3 feet away
from the subject.
If the lens hood is attached or if you are too close to the subject, the
bottom portion of the picture might turn out dark. For important
shots, check the image on the LCD monitor to make sure the flash
exposure looks good (not dark at the bottom).
3 Using Red-eye Reduction
Using the red-eye reduction lamp before taking a flash picture can
reduce red eye. Red-eye reduction will work in any shooting mode
except <3> <7> <5>.
Under the [1] tab, select [Red-eye
On/Off], then press <0>. Select
[On], then press <0>.
For flash photography, when you
press the shutter button halfway, the
red-eye reduction lamp will light.
Then when you press the shutter
button completely, the picture will be
taken.
The red-eye reduction feature is most effective when the subject looks at
the red-eye reduction lamp, when the room is well lit, or when you go
closer to the subject.
When you press the shutter button halfway, the viewfinder display on the
bottom will gradually turn off. For best results, take the picture after this
display turns off.
The effectiveness of red-eye reduction varies from subject to subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
E: Changing the AF ModeN
You can change the AF mode to suit different subjects such as group
photos, animals, and sports.
Press the <ZE> button.
1
X [AF mode] will appear.
Select the AF mode.
Press the <U> key to select the AF
2
mode, then press <0>.
Focus the subject.
Aim the AF point over the subject and
3
press the shutter button halfway. The
camera will then autofocus in the
selected AF mode.
Selecting the Best AF Mode
X (One-Shot AF)
Suitable for still subjects. When you press the shutter button
halfway, the camera will focus only once. You can also recompose
the shot.
9 (AI Focus AF)
Suitable when you cannot decide between One-Shot AF or AI Servo
AF. Depending on the subject’s movement, the camera will switch
automatically to One-Shot AF or AI Servo AF.
* When focus is achieved in the AI SERVO AF mode, the beeper will sound
softly. The focus confirmation light <o> in the viewfinder will not light.
* AI stands for Artificial Intelligence.
Z (AI Servo AF)
Suitable for moving subjects. While you hold down the shutter button
halfway, the focus and exposure setting will be adjusted
continuously.
* Even when focus is achieved, the beeper will not sound. Also, the focus
confirmation light <o> in the viewfinder will not light.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
S Selecting the AF PointN
In the Basic Zone modes, all the AF points are active. Generally, the AF
point covering the closest subject will be selected to focus. Therefore,
the camera sometimes may not focus the subject you want.
With the <d> (Program AE), <s>, <f>, and <a> modes, you can
select one AF point to focus where you want.
Press the <S> button. (9)
1
X The selected AF point is indicated on
the LCD monitor and in the
viewfinder.
When all AF points light up, automatic
AF point selection will be set.
Select the AF point.
2
Press the <S> key to select the AF
point.
While looking at the viewfinder, you
can select the AF point by turning the
<6> dial until the desired AF point
flashes in red.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
Focus the subject.
Aim the selected AF point over the
3
subject and press the shutter button
halfway to focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
S Selecting the AF PointN
Shooting Tips
When shooting a portrait up close, use One-Shot AF and focus
the eyes.
If you focus the eyes first, you can then recompose and the face will
remain sharp.
If it is difficult to focus, select and use the center AF point.
The center AF point focuses the best among the seven AF points.
To make it easier to focus a moving subject, set the camera to
automatic AF point selection and AI Servo AF.
First use the center AF point to focus. If the subject moves away
from the center AF point, the other AF points will continue to focus-
track the subject automatically.
Manual Focusing
Set the lens focus mode switch to
<MF>.
1
2
Focus the subject.
Focus by turning the lens focusing
ring until the subject looks sharp in
Focusing ring
the viewfinder.
If you press the shutter button halfway during manual focusing, the AF
point achieving focus flashes briefly and the focus confirmation light
<o> in the viewfinder will light.
<AF> stands for Auto Focus. <MF> stands for Manual Focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
i Continuous ShootingN
You can shoot up to about 3 shots per sec. This is effective for shooting
your child running toward you and capturing the different facial expressions.
Press the <Yij> button.
1
2
Select <i>.
Press the <U> key to select <i>,
then press <0>.
The continuous shooting speed will
vary depending on the image-recording
quality that has been set (p.64).
JPEG
1
:
:
Max. approx. 3 shots/sec.
Max. approx. 1.5 shots/sec.
1+73: Max. approx. 1.5 shots/sec.
Take the picture.
3
The camera shoots continuously
while you hold down the shutter
button fully.
Shooting Tips
Also set the AF mode matching the subject.
For moving subject
When AI Servo AF is set, focusing will be continuous during
continuous shooting.
For still subjects
When One-Shot AF is set, the camera will focus only once during
continuous shooting.
Flash can also be used.
Since the flash will require recharging time, the continuous shooting
speed will be slower.
If the [7 Custom Functions (C.Fn)] menu’s [High ISO speed noise
reduction] (p.155) is set to [1: On], continuous shooting will not be possible.
In the AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
3 Setting the Image-recording Quality
You can select the pixel count (approx. 10.1, 5.3, or 2.5 megapixels)
and the image quality.
Select [Quality].
Under the [1] tab, select [Quality],
1
then press <0>.
X [Quality] will appear.
Select the image-recording quality.
2
For your reference, the respective quality’s
megapixel count (***M), image size in
pixels (****x****), and the number of possible
shots [***] will be displayed. Select the
desired quality, then press <
0
>.
In the Basic Zone modes,
1
and
1+73 will not be displayed as an option.
A different image-recording quality can be
set separately for the Basic Zone modes
and Creative Zone modes.
Guide to Image-recording Quality Settings
File Size
(Approx. MB)
Possible Maximum
Quality
Pixels
Shots
Burst
514
982
859
1630
1474
2816
5
73
83
74
84
76
86
1
3.8
514
High
quality
Approx. 10.1
megapixels (10M)
2.0
982
2.3
859
Medium
quality
Approx. 5.3
megapixels (5.3M)
JPEG
1.2
1630
1474
2816
199
1.3
Low
quality
Approx. 2.5
megapixels (2.5M)
0.7
9.8
Approx. 10.1
megapixels (10M)
High quality
1
+
73
9.8+3.8
143
4
* Based on Canon’s testing standards with a 2GB card, ISO 100, and
Standard Picture Style.
*
The file size, number of possible shots, and maximum burst will vary depending
on the subject, card brand, ISO speed, Custom Functions, and other settings.
* Depending on the image-recording quality (p.63), the continuous
shooting speed will vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
3 Setting the Image-recording Quality
FAQ
I want to select the quality matching the paper size for printing.
Refer to the diagram on the left when
Paper size
choosing the image-recording quality. If
you want to crop the image, selecting a
A3 (42x29.7cm/16.5x11.7in.)
73
higher quality (more pixels) such as 73,
83, 1, or 1+73 is recommended.
83
1
A4 (29.7x21cm/
11.7x8.3in.)
1+73
74
84
76
86
17.8x12.7cm/7.0x5.0in.
14.8x10cm/5.8x3.9in.
What’s the difference between 7 and 8?
It indicates a different image quality due to a different compression
rate. Even with the same number of pixels, the 7 image has higher
image quality. If 8 is selected, the image quality will be slightly
lower, but more images can be saved to the card.
I took more shots than the number of possible shots indicated.
Depending on the shooting conditions, you may be able to take
more shots than was indicated. Or, you might be able to take fewer
shots than indicated. The possible shots displayed is only an
estimate.
Does the camera display the maximum burst?
The maximum burst is displayed in the viewfinder’s right side. Since
it is only a single-digit indicator 0 - 9, any number higher than 9 will
be displayed only as “9.” Note that this number will also be displayed
even when no card is installed in the camera. Be careful not to shoot
without a card in the camera.
When do I use the 1 mode?
1 images require processing with your personal computer. For
details, see “About 1” and “About 1+73” on the next page.
Other than 1, the images will be in the JPEG type commonly used
by digital cameras.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
3 Setting the Image-recording Quality
About 1
1 is the raw data before it is made into a 73 or other images.
Although 1 images require software like Digital Photo Professional
(provided) so they can be displayed on the computer, they also offer
flexibility for image adjustments possible only with 1. 1 is effective
when you want to precisely create your own art or shoot an important
subject.
For example, with a 1 image, you can use the provided software to
create various versions of the same image having a different Picture
Style. Also, if you took the picture with the wrong white balance (p.90),
you can change the white balance without degrading the image quality.
Note that 1 images will not work with direct printing or print ordering
(DPOF).
About 1+73
1+73 records both a 1 and 73 image with a single shot. The
two images are saved to the card. Since the 73 image is recorded as a
processed image, you can view it as is on a personal computer without
the bundled software or print it as is. With 1+73, the two images are
saved with the same file number in the same folder. You can distinguish
between them with the image type or extension. The 1 image’s
extension is “CR2,” and the 73 image’s extension is “JPG.”
1image
0001 . CR2
73image
0001 . JPG
File number
File extension
The Auto Lighting Optimizer (p.156) will not work with 1 and 1+73
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
A
Selecting a Picture StyleN
By selecting a Picture Style, you can obtain the desired image effects
matching your photographic expression or the subject.
Press the <XA> button.
1
X [Picture Style] will appear.
Select a Picture Style.
2
Press the <V> key to select the
Picture Style, then press <0>.
Take the picture.
Focus and press the shutter button
3
completely. The picture will be taken
with the selected Picture Style
applied.
Picture Style Effects
P Standard
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes.
Q Portrait
For nice skin tones. The image looks slightly sharp and crisp.
Effective for close-ups of women or children. This Picture Style is
also selected automatically when the Mode Dial is set to <2>.
By changing the [Color tone] (p.83), you can adjust the skin tone.
R Landscape
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes. This Picture Style is also
selected automatically when the Mode Dial is set to <3>.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
A Selecting a Picture StyleN
S Neutral
This is for users who prefer to process images with their personal
computer. For natural colors and subdued images.
U Faithful
This is for users who prefer to process images with their personal
computer. When the subject is captured under a color temperature
of 5200K, the color is adjusted colorimetrically to match the subject’s
color. The image is dull and subdued.
V Monochrome
For black-and-white images.
Other than with 1, the black-and-white image cannot be reverted to
color. If you want to later shoot pictures in color, make sure the
[Monochrome] setting has been canceled. When [Monochrome] is
selected, <0> will appear in the viewfinder.
W User Def. 1-3
You can register your own Picture Style settings for [Portrait],
[Landscape], etc. (p.85) Any User Defined Picture Style which has
not been set will have the same settings as the Standard Picture
Style.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
4
More Advanced
Techniques
This chapter builds on the previous chapter and
introduces more ways to shoot creatively.
The first half of this chapter explains how to use the <s>
<f> <a> <8> modes on the Mode Dial. Except for
<8>, all the shooting modes can be used in
combination with the functions introduced in Chapter 3.
The second half of this chapter, starting with “Changing the
Metering Mode” explains the methods to adjust the
exposure and the Picture Styles. All the functions
introduced in this chapter can also be used with the <d>
(Program AE) mode introduced in Chapter 3.
About the Main Dial Pointer
The pointer icon <
> displayed
together with the shutter speed, aperture
setting, or exposure compensation
amount indicates that you can turn the
<6> dial to adjust the respective
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
s
:
Action Shots
You can either freeze the action or create motion blur with the <s>
(Shutter-priority AE) mode on the Mode Dial.
* <s> stands for Time value.
Frozen action
Blurred action
(Fast shutter speed)
(Slow shutter speed)
Set the Mode Dial to <s>.
1
Set the desired shutter speed.
See “Shooting Tips” for advice on
setting the shutter speed.
2
Turning the <6> dial to the right
sets a faster shutter speed, and
turning it to the left sets a slower one.
Take the picture.
3
When you focus and press the
shutter button completely, the picture
will be taken at the selected shutter
speed.
About the Shutter Speed Display
The LCD monitor displays the shutter speed as a fraction. However, the
viewfinder displays only the denominator. Also, “0"5” indicates 0.5 sec. and
“15"” is 15 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
s: Action Shots
Shooting Tips
To freeze the action or moving subject.
Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.
To blur a running child or animal giving the impression of fast
movement.
Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow
the moving subject through the viewfinder and press the shutter
button to take the picture. If you use a telephoto lens, hold it steady
to prevent camera shake.
How to blur a flowing river or water fountain.
Use a slow shutter speed to 1/15 sec. or slower. Use a tripod to
prevent camera shake.
Set the shutter speed so that the aperture display does not
blink in the viewfinder.
If you press the shutter button halfway and change
the shutter speed while the aperture is displayed,
the aperture display will also change to maintain
the same exposure (amount of light reaching the
image sensor). If you exceed the adjustable
aperture range, the aperture display will blink to
indicate that the standard exposure cannot be obtained.
If the exposure will be too dark, the lowest aperture will blink. If this
happens, turn the <6> dial to the left to set a slower shutter speed
or increase the ISO speed.
If the exposure will be too bright, the highest aperture will blink. If
this happens, turn the <6> dial to the right to set a faster shutter
speed or decrease the ISO speed.
Using the built-in flash
To obtain a correct flash exposure, the flash output will be set to match
the automatically-set aperture (autoflash exposure). The flash sync
speed can be set from 1/200 sec. to 30 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
f
:
Changing the Depth of Field
To obtain a blurry background or to make everything near and far look
sharp, set the Mode Dial to <f> (Aperture-priority AE) to adjust the
depth of field (range of acceptable focus).
* <f> stands for Aperture value which is the size of the diaphragm hole inside
the lens.
Blurred background
(With a large aperture opening)
Sharp foreground and background
(With a small aperture opening)
Set the Mode Dial to <f>.
1
Set the desired aperture.
2
The higher the aperture, the sharper
the picture will look with a wider depth
of field.
Turning the <6> dial to the right will
set a higher f-number, and turning it
to the left will set a lower f-number.
Take the picture.
3
Focus and press the shutter button
completely. The picture will be taken
with the selected aperture.
About the Aperture Display
The larger the f/number, the smaller the aperture opening will be. The
apertures displayed will differ depending on the lens. If no lens is attached
to the camera, “00” will be displayed for the aperture.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
f: Changing the Depth of Field
Shooting Tips
When using a high aperture, note that camera shake can occur
in low light scenes.
A higher aperture will make the shutter speed slower. Under low
light, the shutter speed can be as long as 30 sec. In such cases,
increase the ISO speed and hold the camera steady or use a tripod.
The depth of field depends not only on the aperture, but also
the lens and subject distance.
Since wide-angle lenses have a wide depth of field (range of
acceptable focus in front of and behind the point of focus), you need
not set a high aperture to obtain a sharp picture from the foreground
to the background. On the other hand, a telephoto lens has a narrow
depth of field.
And the closer the subject, the narrower the depth of field. A farther
subject will have a wider depth of field.
Set the aperture so that the shutter speed display does not
blink in the viewfinder.
If you press the shutter button halfway and change
the aperture while the shutter speed is displayed,
the shutter speed display will also change to
maintain the same exposure (amount of light
reaching the image sensor). If you exceed the
adjustable shutter speed range, the shutter speed
display will blink to indicate that the standard
exposure cannot be obtained.
If the picture will be too dark, the “30"” (30 sec.) shutter speed
display will blink. If this happens, turn the <6> dial to the left to set
a lower aperture or increase the ISO speed.
If the picture will be too bright, the “4000” (1/4000 sec.) shutter
speed display will blink. If this happens, turn the <6> dial to the
right to set a higher aperture or decrease the ISO speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
f: Changing the Depth of Field
Using the Built-in Flash
To obtain a correct flash exposure, the flash output will be set
automatically to match the set aperture (autoflash exposure). The
shutter speed will be set automatically between 1/200 sec. - 30 sec. to
suit the scene’s brightness.
In low light, the main subject is exposed with the automatic flash, and
the background is exposed with a slow shutter speed set automatically.
Both the subject and background look properly exposed (automatic
slow-speed flash sync). If you are handholding the camera, keep it
steady to prevent camera shake. Using a tripod is recommended.
To prevent slow-speed sync, select the [7 Custom Functions (C.Fn)]
menu’s [Flash sync. speed in Av mode] (p.154) and set it to [1: 1/
200sec. (fixed)].
Depth-of-Field PreviewN
Press the depth-of-field preview button
to stop down to the current aperture
setting. You can check the depth of field
(range of acceptable focus) through the
viewfinder.
If it is difficult to discern the depth of field, first set the lowest f-number. Then
hold down the depth-of-field preview button and look through the viewfinder
while turning the <6> dial to the right. As the aperture gets smaller, the
viewfinder will gradually look darker. You can also see how the depth of field
increases.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
a
:
Manual Exposure
You can set both the shutter speed and aperture as desired. With flash, the
flash exposure will be set automatically to match the aperture that was set.
The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb.
* <a> stands for Manual.
Set the Mode Dial to <a>.
1
Set the shutter speed and aperture.
2
To set the shutter speed, turn the
<6> dial.
<6>
<O> + <6>
To set the aperture, hold down the
> button and turn the < > dial.
<
O
6
Standard exposure index
Exposure level mark
Set the exposure and take the
3 picture.
The exposure level indicator in the
viewfinder indicates the exposure
level up to ±2 stops from the standard
exposure index at the center. While
you change the shutter speed and
aperture, the exposure level mark will
move. You can decide which
exposure level to set.
Bulb Exposures
In step 2, turn the <6> dial left to set <BULB>. A bulb exposure
keeps the shutter open for as long as you hold down the shutter button.
It can be used to photograph fireworks, etc. The elapsed exposure time
will be displayed on the LCD monitor.
For bulb exposures, using a Remote Switch (p.164) is recommended.
Since bulb exposures produce more noise than usual, the image will look
rough or grainy. You can reduce this noise by setting the [7 Custom
Functions (C.Fn)] menu’s [Long exp. noise reduction] (p.155) to [1:
Auto] or [2: On].
The Auto Lighting Optimizer (p.156) will not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
8
:
Automatic Depth-of-Field AE
Objects in the foreground and background will be in focus
automatically. All the AF points will function to detect the subject, and
the aperture required to attain the necessary depth of field will be set
automatically.
* <8> stands for Auto-Depth of field. This mode sets the depth of field
automatically.
Set the Mode Dial to <8>.
1
Focus the subject.
2
Aim the AF points over the subjects
and press the shutter button halfway.
(0)
All the subjects covered by the AF
points flashing in red will be in focus.
Take the picture.
3
FAQ
The aperture display in the viewfinder blinks.
The exposure is correct, but the desired depth of field cannot be
obtained. Either use a wide-angle lens or move farther away from
the subjects.
The shutter speed display in the viewfinder blinks.
If the “30"” shutter speed blinks, it means that the subject is too dark.
Increase the ISO speed. If the “4000” shutter speed blinks, it means
that the subject is too bright. Decrease the ISO speed.
A slow shutter speed has been set.
Use a tripod.
I want to use flash.
Flash can be used, however, the result will be the same as using the
<d> mode with flash. The desired depth of field will not be obtained.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
q Changing the Metering ModeN
The metering mode is the method of measuring the brightness of the
subject. Normally, evaluative metering is recommended.
Press the <WQ> button.
1
X [Metering mode] will appear.
Select the metering mode.
2
Press the <V> key to select the
metering mode, then press <0>.
q Evaluative metering
This is an all-around metering mode suited for
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
This metering mode is set automatically in the
Basic Zone modes.
w Partial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. The gray
area in the left figure is where the metering is
weighted to obtain the standard exposure.
e Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene. This metering mode
is for advanced users.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Setting Exposure CompensationN
Exposure compensation is used to alter the standard exposure set by the
camera. You can make the image look brighter (increased exposure) or
darker (decreased exposure). The exposure compensation setting will
not be automatically canceled when you turn off the camera. After
taking the picture, reset the exposure compensation to zero.
O Setting Exposure Compensation
Set exposure compensation if the exposure (without flash) does not
come out as desired. This feature can be used in the Creative Zone
modes (except <a>).
Making it brighter
Hold down the <O> button and
turn the <6> dial to the right.
(Increased exposure)
Making it darker
Hold down the <O> button and
turn the <6> dial to the left.
Increased exposure for a brighter image
(Decreased exposure)
X As shown in the figure, the exposure
level is displayed on the LCD monitor
and in the viewfinder.
Decreased exposure for a darker image
After taking the picture, hold down the
<O> button and turn the <6>
dial to reset the exposure
compensation to zero.
Exposure is dark
Exposure compensation made it brighter
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Setting Exposure CompensationN
y Flash Exposure CompensationN
Set flash exposure compensation if the flash exposure of the subject does not
come out as desired. This feature also works with external EX-series Speedlites.
Select [Flash exp comp].
1
Under the [2] tab, select [Flash exp
comp], then press <0>.
Set the exposure compensation amount.
2
To make the flash exposure brighter,
press the < > key. (Increased exposure)
Z
Or to make it darker, press the <Y> key.
(Decreased exposure)
After setting the flash exposure
compensation amount, press <0>.
When you press the shutter button
halfway, the <y> icon and flash
exposure compensation amount will be
displayed on the LCD monitor and the
<y> icon will appear in the viewfinder.
After taking the picture, do step 2 to
reset the flash exposure
compensation amount to zero.
A bright flash exposure
Flash exposure compensation making it darker
If the [7 Custom Functions (C.Fn)] menu’s [Auto Lighting Optimizer]
(p.156) is set to [0: Enable], the exposure compensation and flash exposure
compensation may not be effective. Set it to [1: Disable] if you want to
obtain the results of the exposure compensation setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
3 Auto Exposure BracketingN
This feature takes exposure compensation a step further by varying the
exposure automatically with three shots as shown below. You can then
choose the best exposure. This is called AEB (Auto Exposure
Bracketing).
Standard exposure
Darker exposure
Brighter exposure
(Decreased exposure)
(Increased exposure)
Select [AEB].
Under the [2] tab, select [AEB], then
press <0>.
1
AEB amount
Set the AEB amount.
Press the <U> key to set the AEB
amount, then press <0>.
2
When you press the shutter button
halfway, the AEB amount will be
displayed on the LCD monitor.
Take the picture.
3
Focus and press the shutter button
completely. With the current drive
mode (p.63), the three bracketed
shots will be taken in this sequence:
Standard, decreased, and increased
exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
3 Auto Exposure BracketingN
Canceling AEB
Follow steps 1 and 2 to set the AEB
amount to <
>.
The AEB setting will be canceled
automatically if the power switch is
set to <2>, obtain flash-ready, etc.
Shooting Tips
Using AEB with continuous shooting.
If <i> continuous shooting (p.63) has been set and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard, decreased, and increased
exposure.
Using AEB with <u> single shooting.
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: Standard, decreased, and increased exposure.
Using AEB with exposure compensation.
Centering on the exposure compensation amount, AEB will be
taken.
Using AEB with the self-timer.
With self-timer <
> or <l>, you can take three continuous
shots. With <q> set, the number of continuous shots will be three
times the number set (p.53).
Neither flash nor bulb exposures can be used with AEB.
If the [7 Custom Functions (C.Fn)] menu’s [Auto Lighting Optimizer]
(p.156) is set to [0: Enable], the AEB may not be effective. Set it to [1:
Disable] if you want to obtain the results of the AEB setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
A Customizing the Picture StyleN
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see page 84.
Select [Picture Style].
1
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
Select a Picture Style.
2
Select a Picture Style, then press the
<B> button.
X The Detail set. screen will appear.
Select a parameter.
3
Select a parameter such as
[Sharpness], then press <0>.
Set the parameter.
4
Press the <U> key to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameter. The Picture
Style selection screen will reappear.
X Any parameter settings different from
the default will be displayed in blue.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
A Customizing the Picture StyleN
Parameter Settings and Effects
Sharpness
Adjusts the sharpness of the image.
To make it less sharp, set it toward the E end. The closer it is to E,
the softer the image will look.
To make it sharper, set it toward the F end. The closer it is to F,
the sharper the image will look.
Contrast
Adjusts the image contrast and the vividness of colors.
To decrease the contrast, set it toward the minus end. The closer it
is to G, the blander the image will look.
To increase the contrast, set it toward the plus end. The closer it is to
H, the crisper the image will look.
Saturation
The image’s color saturation can be adjusted.
To decrease the color saturation, set it toward the minus end.
The closer it is to G, the lighter the colors will look.
To increase the color saturation, set it toward the plus end. The
closer it is to H, the more saturated the colors will look.
Color tone
The skin tones can be adjusted.
To make the skin tone redder, set it toward the minus end. The
closer it is to G, the redder the skin tone will look.
To make the skin tone less red, set it toward the plus end. The closer
it is to H, the more yellow the skin tone will look.
By selecting [Default set.] in step 3, you can revert the respective Picture
Style to its default parameter settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
A Customizing the Picture StyleN
Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast] explained on the preceding page.
Filter Effect
With a filter effect applied to a monochrome image, you can make white
clouds or green trees stand out more.
Filter
Sample Effects
Normal black-and-white image with
no filter effects.
N: None
The blue sky will look more natural,
and the white clouds will look
crisper.
Ye: Yellow
The blue sky will look slightly
Or: Orange darker. The sunset will look more
brilliant.
The blue sky will look quite dark.
R: Red
Fall leaves will look crisper and
brighter.
Skin tones and lips will look fine.
Tree leaves will look crisper and
brighter.
G: Green
Setting the [Contrast] to the plus side will make the filter effect more
pronounced.
Toning Effect
By applying a toning effect, you can create a monochrome image in that
color. It can make the image look more impressive.
The following can be selected: [N:None]
[S:Sepia] [B:Blue] [P:Purple]
[G:Green].
Download from Www.Somanuals.com. All Manuals Search And Download.
84
A Registering the Picture StyleN
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3].
You can create Picture Styles whose parameter settings such as for
sharpness and contrast are different. You can also adjust the
parameters of a Picture Style which has been registered to the camera
with the provided software.
Select [Picture Style].
1
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
Select [User Def.].
2
Select [User Def. *], then press the
<B> button.
X The Detail set. screen will appear.
Press <0>.
With [Picture Style] selected, press
3
<0>.
Select the base Picture Style.
4
Press the <V> key to select the
base Picture Style, then press <0>.
To adjust the parameters of a Picture
Style which has been registered to
the camera with the provided
software, select the Picture Style
here.
Download from Www.Somanuals.com. All Manuals Search And Download.
85
A Registering the Picture StyleN
Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
5
Set the parameter.
6
Press the <U> key to adjust the
parameter as desired, then press
<0>.
For details, see “Customizing the
Picture Style” on pages 82-84.
Press the <M> button to register
the new Picture Style. The Picture
Style selection screen will then
reappear.
X The base Picture Style will be
indicated on the right of [User Def. *].
X The name of the Picture Style having
any modified settings (different from
the default) registered under [User
Def. *] will be displayed in blue.
If a Picture Style has already been registered under [User Def. *], changing
the base Picture Style in step 4 will nullify the parameter settings of the
registered Picture Style.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
3Setting the Color SpaceN
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal images, sRGB is recommended.
In the Basic Zone modes, sRGB is set automatically.
Select [Color space].
1
Under the [2] tab, select [Color
space], then press <0>.
Set the desired color space.
2
Select [sRGB] or [Adobe RGB], then
press <0>.
About Adobe RGB
This is mainly used for commercial printing and other industrial uses.
This setting is not recommended if you do not know about image
processing, Adobe RGB, and Design rule for Camera File System 2.0
(Exif 2.21).
Since the image will look very subdued with an sRGB personal
computer environment and printers not compatible with Design rule for
Camera File System 2.0 (Exif 2.21), post-processing of the image with
software will be required.
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual in the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
A AE LockN
Use AE lock when the area of focus is to be different from the exposure
metering area or when you want to take multiple shots at the same exposure
setting. Press the <A> button to lock the exposure, then recompose and
take the shot. This is called AE lock. It is effective for backlit subjects.
Focus the subject.
Press the shutter button halfway.
X The exposure setting will be
1
displayed.
Press the <A> button. (0)
2
X The <A> icon lights in the viewfinder
to indicate that the exposure setting is
locked (AE lock).
Each time you press the <A> button,
it locks the current auto exposure
setting.
Recompose and take the picture.
3
If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
AE Lock Effects
AF Point Selection Method
Metering Mode
(p.77)
Automatic Selection
Manual Selection
AE lock is applied at the AF
point that achieved focus.
AE lock is applied at the
selected AF point.
q*
AE lock is applied at the center AF point.
we
* When the lens’ focus mode switch is set to <MF>, AE lock is applied at the
center AF point.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
A FE LockN
FE lock locks the flash exposure setting over the desired area of the
subject. This feature also works with external EX-series Speedlites.
* FE stands for Flash Exposure.
Press the <D> button to pop-up
the built-in flash.
Press the shutter button halfway and
look in the viewfinder to check that
the <D> icon is lit.
1
Focus the subject.
2
3
Press the <A> button. (8)
Aim the viewfinder center over the
subject where you want to lock the flash
exposure, then press the <A> button.
X The flash will fire a preflash and the
required flash output is calculated
and retained in memory.
X In the viewfinder, “FEL” is displayed
for a moment and <d> will light.
Each time you press the <A> button, a
preflash is fired and the required flash output
is calculated and retained in memory.
Take the picture.
Compose the shot and press the
shutter button completely.
4
X The flash is fired to take the picture.
If the subject is too far away and beyond the effective range of the flash, the
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
B: Setting the White BalanceN
White balance (WB) is for making the white areas look white. Normally,
the <Q> (Auto) setting will obtain the correct white balance. If natural-
looking colors cannot be obtained with <Q>, you can select the white
balance for each light source or set it manually by shooting a white
object. In the Basic Zone modes, <Q> will be set automatically.
Press the <B> button.
1
X [White balance] will appear.
Select the white balance.
Press the <U> key to select the
2
desired white balance, then press
<0>.
The “Approx. ****K” (K: Kelvin)
displayed for the selected white
balance <W> <E> <R> <Y>
<U> is the respective color
temperature.
O Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Do this procedure under
the actual light source to be used.
Photograph a white object.
1
The plain, white object should fill the
viewfinder center.
Focus manually and set the standard
exposure for the white object.
You can set any white balance.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
B: Setting the White BalanceN
Select [Custom WB].
Under the [2] tab, select [Custom
WB], then press <0>.
2
3
X The SET screen will appear.
Import the white balance data.
Select the image that was captured in
step 1, then press <0>.
X On the dialog screen which appears,
select [OK] and the data will be
imported.
When the menu reappears, press the
<M> button to exit the menu.
Select the custom white balance.
4
Press the <B> button.
Press the <U> key to select <O>,
then press <0>.
If the exposure obtained in step 1 is way off, a correct white balance
might not be obtained.
If the image was captured while the Picture Style was set to
[Monochrome] (p.68), it cannot be selected in step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
3White Balance CorrectionN
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
White Balance Correction
Select [WB SHIFT/BKT].
1
Under the [2] tab, select [WB
SHIFT/BKT], then press <0>.
X The WB correction/WB bracketing
screen will appear.
Set the white balance correction.
2
Press the <S> key to move the “ ”
mark to the desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
Sample setting: A2, G1
corrected.
On the upper right, “SHIFT” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB SHIFT/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <2> will be displayed in the
viewfinder and on the LCD monitor.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: A measurement unit indicating the
density of a color temperature conversion filter.)
Download from Www.Somanuals.com. All Manuals Search And Download.
92
3 White Balance CorrectionN
White Balance Auto Bracketing
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing
amount.
In step 2 for white balance correction,
when you turn the < > dial, the “ ”
mark on the screen will change to “
(3 points). Turning the < > dial to the
6
”
6
B/A bias ±3 levels
right sets the B/A bracketing, and turning
it to the left sets the M/G bracketing.
X
On the right side of the screen, “BKT”
indicates the bracketing direction and the
bracketing amount is also displayed.
Pressing the <B> button will cancel
all the [WB SHIFT/BKT] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be lower
and the number of possible shots will also decrease to one-third the normal
number. If the [7 Custom Functions (C.Fn)] menu’s [High ISO speed
noise reduction] (p.155) is set to [1: On], WB bracketing will not be possible.
Since three images are recorded for one shot, the card will take longer to record the shot.
“BKT” stands for Bracketing.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Preventing Camera ShakeN
The camera’s mechanical shake caused by the reflex mirror action can
affect images taken with a super telephoto lens or close-up (macro)
lens. In such cases, mirror lockup is effective.
Mirror lockup is enabled by selecting [7 Custom Functions
(C.Fn)] and setting [Mirror lockup] (p.157) to [1: Enable].
Focus the subject and press the
shutter button completely. The reflex
mirror will lock up.
Then press the shutter button
completely again to take the picture.
The reflex mirror will then go back
down
.
Shooting Tips
Using the self-timer <l> with mirror lockup.
When you press the shutter button completely, the mirror locks up,
then the picture is taken 2 sec. later.
Do not point the camera toward the sun. The sun’s heat can scorch and
damage the shutter curtains.
If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (self-timer
delay time + bulb exposure time). If you let go of the shutter button
during the self-timer countdown, there will be a shutter-release sound.
However, this is not the actual shutter release (no picture is taken).
Even if <i> (Continuous shooting) has been set, single shooting will
still take effect.
The mirror locks up, and after 30 seconds, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
5
Live View Shooting
You can shoot while viewing a real-time image on the
camera’s LCD monitor or on a personal computer
screen. This is called “Live View shooting.”
Convenient when the camera is mounted on a
tripod for shooting still lifes, for example.
If you handhold the camera like a compact
digital camera and shoot while viewing the
LCD monitor, camera shake can cause
blurred images.
About Remote Live View Shooting
With the provided software installed in the personal computer, you
can connect the camera to the personal computer and shoot
remotely while viewing the computer screen instead of the
camera’s viewfinder. For details, see the Software Instruction
Manual in the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Preparing for Live View ShootingN
Set the camera for Live View shooting.
Set the shooting mode.
Set the shooting mode to a Creative
1
Zone mode.
Live View shooting does not work
in Basic Zone modes.
Select [Live View function
2 settings].
Under the [6] tab, select [Live View
function settings], then press <0>.
Select [Live View shoot.].
3
Select [Live View shoot.], then press
<0>. Select [Enable], then press
<0>.
Exit the menu.
Press the <M> button to exit.
4
5
Display the Live View image.
Press <0>.
X The Live View image will appear on
the LCD monitor.
The Live View image will reflect the
brightness level of the actual image
you capture.
If the image is too bright, turn the
<6> dial to the right. If it is too dark,
turn the <6> dial to the left.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Preparing for Live View ShootingN
During Live View shooting, do not point the camera toward the sun. The
sun’s heat can damage the camera’s internal components.
Live View shooting will disable a few Custom Function settings. (p.153)
Under low light or bright light conditions, the Live View image might not
reflect the brightness of the captured image.
If the light source within the image changes, the screen might flicker. If
this happens, stop the Live View shooting, then resume Live View
shooting under the actual light source to be used.
During Live View image display, if you point the camera in a different
direction, it might throw off the correct brightness momentarily and the
image might not look right. Wait until the image brightness stabilizes
before shooting.
If there is a very bright light source in the picture, such as the sun, the
bright area might be blackened on the LCD monitor. However, the actual
captured image will correctly show the bright area.
If you set the [6 LCD brightness] to bright settings in low light,
chrominance noise may appear in the Live View image. However, the
chrominance noise will not be recorded to the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
Under the [7 Custom Functions (C.Fn)] menu, setting [Auto Lighting
Optimizer] (p.156) to [0: Enable] may display a darkly-exposed (set with
exposure compensation) image brighter.
If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [5 Auto power off]. (p.109) If [5 Auto
power off] is set to [Off], the Live View shooting will stop automatically
after 30 min. (camera power remains on).
The image’s field of view is about 100%.
With the video cable (provided) connecting the camera to a TV set, you
can view images on the TV. (p.128)
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Focusing ManuallyN
Although autofocus can be used (p.102, 104), magnifying the image
and focusing manually is recommended for precise focusing.
Magnifying the Image for Manual Focusing
Set the lens focus mode switch to
<MF>.
Turn the lens focusing ring to focus
1
roughly.
Move the focusing frame to the
2 position where you want to focus.
Press the <S> key to move the
focusing frame.
To move to the center focusing frame,
press the <L> button.
Magnify the image.
3
Press the <u> button.
X The area within the focusing frame
will be magnified.
Each time you press the <u> button,
the display format will change as
Magnification: 10x
follows:
5x
10x
Full view
Focus manually.
4
While looking at the magnified image,
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the full view.
AE lock
Magnified area
Magnification
Download from Www.Somanuals.com. All Manuals Search And Download.
98
ShootingN
Check the exposure.
1
Press the shutter button halfway.
X The shutter speed and aperture will
be displayed.
If you set exposure compensation,
the image brightness will change
accordingly.
Take the picture.
2
Press the shutter button completely.
X The picture will be taken and the
captured image is displayed on the
LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
Exit Live View shooting.
With the Live View image displayed,
press <0>.
3
About the Shooting Settings
<8> will be the same as using <d>.
You can set the ISO speed, white balance, and exposure
compensation during Live View shooting.
The Picture Style, drive mode, AF mode, and AF point cannot be
changed during Live View shooting.
During Live View shooting, the metering mode will be set to
evaluative metering regardless of the current metering mode setting.
You can check the depth of field by pressing the depth-of-field
preview button.
During continuous shooting, the exposure set for the first shot will
also be applied to subsequent shots.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
ShootingN
Battery Life with Live View Shooting [Approx. number of shots]
Shooting Conditions
Temperature
No Flash
200
50% Flash Use
At 23°C / 73°F
At 0°C / 32°F
190
180
190
The figures above are based on a fully-charged LP-E5 battery and CIPA
(Camera & Imaging Products Association) testing standards.
Autofocusing will decrease the number of possible shots.
When you use Live View shooting for a long period, the camera’s internal
temperature may increase and it can degrade image quality. Terminate
Live View shooting when not shooting images. Before taking a long
exposure, stop Live View shooting temporarily and wait several minutes
before shooting.
High temperatures, high ISO speeds, or long exposures may cause
noise or irregular colors in the image captured with Live View shooting.
If you take the picture while the image is magnified, the exposure might
not come out as desired. Return to the full view before taking the picture.
During the magnified view, the shutter speed and aperture will be
displayed in red.
Even if you take the picture during magnified view, the captured image
will reflect the full view.
The focus preset feature on super telephoto lenses cannot be used.
For Live View shooting, do not use an Extension Tube or TS-E lens.
Doing so can cause irregular or unintended exposures.
FE lock is not possible when the built-in flash or external Speedlite is
used. Modeling flash is not possible when external Speedlite is used.
A non-Canon flash will not fire.
A grid can be displayed. Under [6 Live View function settings], set
[Grid display] to [On].
You can change the metering timer. Under [6 Live View function
settings], set [Metering timer].
When you take a picture with flash, it will sound like two pictures were
taken. However, only one picture is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
ShootingN
About the Information Display
Each time you press the <B> button, the information display will
change.
Drive mode
Histogram
White balance
Picture Style
(Brightness/RGB)
Focusing frame
Image-recording quality
Live View exposure
simulation
Battery check
ISO speed
AE lock
Shutter speed
Shots remaining
Flash exposure compensation
Flash-ready
Aperture
Exposure level
When <
> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <
> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the captured image will reflect the exposure setting.
If flash is used or bulb is set, the <
> icon and histogram will be
grayed out. The histogram might not be properly displayed in low light or
bright light conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Using AF to FocusN
Under [7 Custom Functions (C.Fn)],
when [AF during Live View shooting]
(p.157) is set to [1: Quick mode] or [2: Live
mode], you can focus with AF. Quick mode
and Live mode use a different AF method.
If you want precise focusing, magnify the
image and focus manually. (p.98)
C.Fn-7-1: Quick mode
This is the same as using AF (p.60, 61) as usual with the dedicated AF
sensor. Although you can focus the desired area quickly, the Live View
image will be interrupted momentarily during the AF operation.
Set to Quick mode, the lens focus mode switch to <f>, and the
AF mode to <X>.
Select the AF point.
Before starting Live View shooting,
1
select the AF point.
Press the <S> button and press the
<S> key to select the AF point.
Press the shutter button halfway for
shooting ready.
AF point
Display the Live View image.
Press <0>.
X The Live View image will appear on
the LCD monitor.
2
The selected AF point will be
displayed.
The focusing frame (larger frame) will
also be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Using AF to FocusN
Focus the subject.
3
Aim the selected AF point over the
subject, and hold down the <A>
button.
X The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
X When focus is achieved, the beeper
will sound.
Return to the Live View image
4 display and shoot.
When you let go of the <A> button,
the Live View image will reappear.
Check the focus and exposure, then
press the shutter button to take the
picture (p.99).
You cannot take a picture during autofocusing. Take the picture only
while the Live View image is displayed.
You can move the focusing frame with the <S> keys. To magnify the
area within the focusing frame, press the <u> button.
Although you can set the AF mode to AI Servo AF or AI Focus AF, AF will
stop when the camera returns to the Live View image display (step 4), so
you cannot focus the moving subject.
If you want AF and AE lock to work separately, select the [7 Custom
Functions (C.Fn)] menu’s [Shutter/AE lock button] (p.158) and set it to
[1: AE lock/AF].
AF is not possible with Remote Switch RS-60E3 (sold separately).
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Using AF to FocusN
C.Fn-7-2: Live mode
The image sensor is used to focus. Although AF is possible with the
Live View image displayed, the AF operation will take longer than with
Quick mode. Also, achieving focus may be more difficult than with
Quick mode.
Set to Live mode and the lens focus mode switch to <f>.
Display the Live View image.
Press <0>.
X The Live View image will appear on
the LCD monitor.
1
When Live mode is set, the AF point
< > will be displayed.
Focus the subject.
2
Aim the AF point over the subject,
and hold down the <A> button.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
Take the picture.
Check the focus and exposure, then
3
press the shutter button to take the
picture (p.99).
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Using AF to FocusN
About the AF point with Live mode
You can press the <S> keys to move the AF point to where you
want to focus (it cannot go to the edges of the picture). To move to
the center AF point, press the <L> button.
To magnify the image at the AF point, press the <u> button.
If focusing is difficult with the magnified image, return to the full view and
use AF.
If the image flickers, making it difficult to focus, stop the Live View
shooting and resume Live View shooting under the actual light source to
be used. Check that the flickering has stopped, then autofocus.
If you autofocus in the full view, then magnify the image, the focus might
be off.
The AF-assist beam will not be emitted.
AF is not possible with Remote Switch RS-60E3 (sold separately).
Depending on the subject or the lens used, achieving focus may be
difficult or take some time. In such cases, focus manually (p.98) or
autofocus with Quick mode. (p.102)
Even when focus has been achieved, if you press the <A> button again,
the lens will move to focus again.
The image brightness may change during and after the AF operation.
If you want AF and AE lock to work separately, select the [7 Custom
Functions (C.Fn)] menu’s [Shutter/AE lock button] (p.158) and set it to
[1: AE lock/AF].
The AF speed may be different during the full view and magnified view.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Using AF to FocusN
With Live mode, AF can fail to achieve focus in the following
cases:
Low-contrast subject such as a blue sky and solid-color surfaces.
Subjects in low light.
Stripes and other patterns where there is contrast only in the
horizontal direction.
Under a light source whose brightness, color, or pattern keeps
changing.
Night scenes or points of light.
Under fluorescent lighting or when the image flickers.
Extremely small subjects.
Subjects strongly reflecting light.
The AF point covers both a near and faraway subject (such as an
animal in a cage).
Subjects which keep moving within the AF point and cannot keep
still due to camera shake or subject blur.
A subject approaching or leaving the camera.
Autofocusing while the subject is way out of focus.
Soft focus effect is applied with a soft focus lens.
A special effects filter is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
6
Handy Features
Silencing the Beeper (p.108)
Card Reminder (p.108)
Setting the Image Review Time (p.108)
Setting the Auto Power-off Time (p.109)
Setting the LCD Monitor Brightness (p.109)
File Numbering Methods (p.110)
Auto Image Rotation (p.112)
Checking Camera Function Settings (p.113)
Reverting the Camera to the Default Settings (p.114)
Preventing the LCD Monitor from Turning off Automatically
(p.115)
Changing the Shooting Settings Screen Color (p.115)
Flash Control (p.116)
Automatic Sensor Cleaning (p.118)
Appending Dust Delete Data (p.119)
Manual Sensor Cleaning (p.121)
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Handy Features
3 Silencing the Beeper
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [1] tab, select [Beep], then
press <0>. Select [Off], then press
<0>.
3 Card Reminder
This prevents shooting if there is no card in the camera.
Under the [1] tab, select [Shoot w/o
card], then press <0>. Select [Off],
then press <0>.
If there is no card installed and you press
the shutter button, “Card” will be
displayed in the viewfinder, and you
cannot release the shutter.
3 Setting the Image Review Time
How long the image is displayed on the LCD monitor immediately after
capture can be set. If [Off] is set, the image review will not be displayed. If
[Hold] is set, the image review will be displayed up until the [Auto power
off] time. During the image review, if you operate any camera controls such
as pressing the shutter button halfway, the image display will end.
Under the [1] tab, select [Review time],
then press <0>. Set the time, then
press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Handy Features
3 Setting the Auto Power-off Time
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. You can set this auto power-off time.
When the camera has turned off due to auto power off, you can wake
up the camera by pressing the shutter button halfway or any of the
following buttons: <M> <B> <x> <0> etc.
If [Off] has been set, either turn off the camera yourself or press
the <B> button to turn off the shooting settings display to save
battery power.
If [Off] has been set and the camera is not used for 30 min., the
LCD monitor will turn off automatically. To turn on the LCD monitor
again, press the <B> button.
Under the [5] tab, select [Auto power
off], then press <0>. Set the time, then
press <0>.
3 Setting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [6] tab, select [LCD
brightness], then press <0>. With the
adjustment screen displayed, press the
<U> key to adjust the brightness, then
press <0>.
When checking the exposure of an
image, set the LCD monitor brightness to
4 and prevent the ambient light from
affecting the reviewed image.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Handy Features
3 File Numbering Methods
The file number is like the frame number on a roll of film. The captured
images are assigned a sequential file number from 0001 to 9999 and
saved in one folder. You can change how the file number is assigned.
The file number will appear on the personal computer in this format:
IMG_0001.JPG.
Under the [5] tab, select [File
numbering], then press <0>. Follow
the steps below to select a file
numbering method, then press <0>.
[Continuous]: The file numbering continues in sequence even
after the card is replaced.
Even after you replace the card, the file numbering continues in
sequence up to 9999. This is convenient when you want to save the
images numbered anywhere between 0001 to 9999 in one folder in
your personal computer.
However, if the replacement card contains images recorded
previously, the file numbering of the new images might continue from
the file numbering of the existing images in the card. If you want to
use continuous file numbering, you should use a newly-formatted
card each time.
File numbering after replacing the card
Card -1
Card -2
0051
0052
Next sequential file number
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Handy Features
[Auto reset]: Resets the file numbering to 0001 whenever the
card is replaced.
Each time you replace the card, the file numbering restarts from
0001. This is convenient if you want to organize images according to
cards.
However, if the replacement card contains images recorded
previously, the file numbering of the new images might continue from
the file numbering of the existing images in the card. To restart the file
numbering from 0001, you should use a newly-formatted card.
File numbering after replacing the card
Card -1
Card -2
0051
0001
File numbering is reset
[Manual reset]: You can reset the file numbering to 0001 at any
time or for a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001. This is convenient when you want to use different
folders for the images taken yesterday and the ones taken today, for
example. After the manual reset, the file numbering returns to
continuous or auto reset.
If folder No. 999 is created, [Folder number full] will appear on the LCD
monitor. If that folder contains images reaching file number 9999, shooting will
not be possible even if the card still has storage capacity. The LCD monitor will
display a message to replace the card. Replace with a new card.
For both JPEG and RAW images, the file name will start with “IMG_”. The
extension will be “.JPG” for JPEG images and “.CR2” for RAW images.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Handy Features
3 Auto Image Rotation
Vertical images are rotated automatically so they are
displayed vertically on the camera’s LCD monitor
and personal computer instead of horizontally. The
setting of this feature can be changed.
Under the [5] tab, select [Auto rotate],
then press <0>. Follow the steps below
to select the desired setting, then press
<0>.
[OnPD]: The vertical image is automatically rotated on both the
camera’s LCD monitor and on the personal computer.
[OnD] : The vertical image is automatically rotated only on the
personal computer.
[Off]
: The vertical image is not automatically rotated at all.
FAQ
The vertical image is not rotated during the image review
immediately after it is captured.
Press the <x> button and the image playback will display the rotated image.
[OnPD] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [Auto
rotate] was set to [Off]. Also, if the vertical image is taken while the
camera is pointed up or down, the image might not rotate for
playback. In such a case, see “Rotating the Image” on page 126.
On the camera’s LCD monitor, I want to rotate an image
captured when [OnD] had been set.
Set [OnPD], then playback the image. It will be rotated.
The vertical image does not rotate on the personal computer screen.
The software used is not compatible with image rotation. Use the
camera’s bundled software instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Handy Features
B Checking Camera Function Settings
While the menu is displayed, press the <B> button to display the
camera’s current settings.
While the menu is displayed, press
the <B> button to display the
settings.
Press the <B> button again to
return to the menu.
Press the shutter button halfway to
return to the shooting settings display.
Settings Display
Card remaining capacity
Color space (p.87)
WB correction (p.92)/
WB bracketing (p.93)
Live View shooting (p.95)
Red-eye reduction (p.59)
Auto rotate display (p.112)
Date/Time (p.29)
Beeper (p.108)
Auto power off (p.109)
Sensor cleaning (p.118)
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Handy Features
3 Reverting the Camera to the Default SettingsN
This is for reverting all the camera’s shooting settings and Custom Functions to
the default settings. This works in the <d> and other Creative Zone modes.
Select [Clear settings].
Under the [7] tab, select [Clear
settings], then press <0>.
1
Select the desired setting.
2
To revert the shooting settings to the
default, select [Clear all camera
settings], then press <0>.
To revert the Custom Functions to the
default settings, select [Clear all Custom
Func. (C.Fn)], then press <
0>.
Select [OK].
Select [OK], then press <0> to clear
the camera settings.
3
X When [Clear all camera settings] is
set, the camera will be reset as
shown in the table below.
Image Settings
Shooting Settings
AF mode
One-Shot AF
Quality
73
AF point selection Automatic selection
ISO speed
Auto
Metering mode
Drive mode
q
u
(Evaluative metering) File numbering Continuous
(Single shooting) Color space
sRGB
Exposure compensation 0 (Zero)
White balance
WB correction
WB bracketing
Picture Style
Q (Auto WB)
Canceled
Canceled
Standard
AEB
Canceled
Flash exposure
compensation
0 (Zero)
Live View shooting Disable
* The white balance data (p.90) obtained from the custom white balance and the
Dust Delete Data (p.119) will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Handy Features
3 Setting the LCD Monitor Off/On
You can enable or disable the LCD monitor’s shooting settings display
(p.42) from turning on when the shutter button is pressed halfway.
Under the [5] tab, select [LCD off/on
btn], then press <0>. Select one of the
settings below, then press <0>.
[Shutter btn.]: The display turns off when you press the shutter
button halfway, and reappears when you let go of
the shutter button.
[Shutter/DISP]: The display turns off when you press the shutter button
halfway, and remains off after you let go of the shutter button.
To turn on the display, press the <
[Remains on]: The display does not turn off when you press the shutter button
halfway. To turn off the display, press the < > button or <
B> button or <0>.
B
0>.
3 Changing the Shooting Settings Screen Color
You can change the background color of the shooting settings screen.
Select [Screen color].
Under the [5] tab, select [Screen
color], then press <0>.
Select the desired color, then press <0>.
When you exit the menu, the selected
color will be displayed for the
shooting settings screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
3 Flash ControlN
The built-in flash and external Speedlite can also be set with the menu.
The menu for the external Speedlite will be applicable only to EX-series
Speedlites whose functions can be set with the camera.
Select [Flash control].
Under the [6] tab, select [Flash
control], then press <0>.
X The flash control screen will appear.
[Flash firing]
Normally, set this to [Enable].
If [Disable] is set, both the built-in
flash and external Speedlite will
not fire. This is good when you only
want to use the AF-assist beam.
[Built-in flash func. setting]
[Flash mode] cannot be selected.
[Flash exp. comp] can be set as
explained on page 79.
Set [E-TTL II] as explained on the
next page.
Shutter sync.
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the exposure
ends. When this is combined with a slow sync speed, you can create
a trail of light such as from car headlights at night. With 2nd curtain
sync, two flashes will be fired. Once when you press the shutter
button completely, and once immediately before the exposure ends.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
3 Flash ControlN
E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire
metered scene as with an external metering flash. Flash exposure
compensation may be necessary depending on the scene, so this is
for advanced users.
Setting the External Speedlites
Select either [External flash func. setting] or [External flash C.Fn
setting]. For details on which external Speedlite settings the
camera can set, see the compatible EX-series (such as the 580EX II)
Speedlite’s instruction manual.
Attach the Speedlite to the camera and turn on the Speedlite.
Select either [External flash func.
setting] or [External flash C.Fn
setting].
1
Select either one, then press <0>.
Settings which cannot be set will be
dimmed.
External flash func. setting
Set the external flash function settings.
2
Select a flash function and set it as
desired. The procedure is the same
as setting a menu function.
On the flash function settings screen,
the settable items or current settings
displayed differ depending on the
current flash mode settings or flash
Custom Function settings.
External flash C.Fn setting
If you press the <B> button to
clear the Speedlite settings, both the
external Speedlite and built-in flash
settings will be cleared.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
3 Automatic Sensor Cleaning
Whenever you set the power switch to <1> or <2>, the Self
Cleaning Sensor Unit operates to automatically shake off the dust on
the front of the sensor. Normally, you need not be aware of this
operation. However, you can execute the sensor cleaning at anytime as
well as disable it.
Cleaning the Sensor Now
Select [Sensor cleaning].
1
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Select [Clean nowf].
2
Select [Clean nowf], then press
<0>.
Select [OK], then press <0>.
X The screen will indicate that the
sensor is being cleaned. Although
there will be a shutter sound, a
picture is not taken.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other surface at a perpendicular angle.
Even if you repeat the sensor cleaning, the result will not improve that
much. Right after the sensor cleaning is finished, the [Clean nowf]
option will remain disabled temporarily.
Disabling Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
X The sensor cleaning will no longer be executed when you set the
power switch to <1> or <2>.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
3 Appending Dust Delete DataN
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
visible on captured images. However, in case visible dust still remains,
you can append the Dust Delete Data to the image to later erase the
dust spots. The Dust Delete Data is used by Digital Photo Professional
(provided software) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens
and turn the focusing ring clockwise all the way.
Obtain the Dust Delete Data
Select [Dust Delete Data].
1
Under the [2] tab, select [Dust
Delete Data], then press <0>.
Select [OK].
Select [OK] and press <0>. The
2
automatic self-cleaning of the sensor
will be performed, then a message
screen will appear. Although there will
be a shutter sound, a picture is not
taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
119
3 Appending Dust Delete DataN
Photograph a solid-white object.
3
At a distance of 20 cm - 30 cm / 0.7 ft.
- 1.0 ft., fill the viewfinder with a
patternless, solid-white object and
take a picture.
X The picture will be taken in the
aperture-priority AE mode with an
aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
X
When the picture is taken, the camera
will start obtaining the Dust Delete Data.
When the Dust Delete Data is obtained,
a message will appear.
Select [OK], and the menu will reappear.
If the data was not obtained
successfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, you
should update the Dust Delete Data by obtaining it again.
For erasing dust spots automatically with the bundled software, see the
Software Instruction Manual in the CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a white piece of paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
3 Manual Sensor CleaningN
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Sensor cleaning].
1
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Select [Clean manually].
2
Select [Clean manually], then press
<0>.
Select [OK].
Select [OK], then press <0>.
X In a moment, the mirror will lockup
3
and the shutter will open.
End the cleaning.
4
Set the power switch to <2>.
For the power source, using the AC Adapter Kit ACK-E5 (sold
separately) is recommended.
If you use the battery, make sure it is fully recharged. If a battery grip with
size-AA batteries is attached, manual sensor cleaning will not be
possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
121
3 Manual Sensor CleaningN
While cleaning the sensor, never do any of the following. If the
power is cut off, the shutter will close and the shutter curtains and
image sensor might get damaged.
•
•
•
Setting the power switch to <2>.
Opening the battery compartment cover.
Opening the card slot cover.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
7
Image Playback
This chapter explains features related to viewing
images. Learn more about image playback as
discussed in chapter 2 “Basic Shooting and Image
Playback” and how to view images on a TV set. You can
also erase images.
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a personal computer or whose
file name was changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
x Searching for Images Quickly
H Display Multiple Images on One Screen (Index display)
Search for images quickly with the index display showing four or nine
images on one screen.
Turn on the index display.
1
During image playback, press the
<I> button.
X The 4-image index display will
appear. The currently-selected image
will be highlighted in a blue frame.
Press the <I> button again to
switch to the 9-image index display.
Î
Î
Select the image.
Turn the <6> dial to select an
adjacent image.
2
Press the <S> key to move the blue
frame to select another image.
Press the <u> button to display the
selected image at full view.
(9 images → 4 images → 1 image)
Download from Www.Somanuals.com. All Manuals Search And Download.
124
x Searching for Images Quickly
Jump through Images (Jump display)
When the card contains many images, you can browse through them by
10 or 100 images at a time. Also, if the images were shot on different
days, you can browse through them by date. This browsing technique is
called jump.
Select the jump method.
1
In the single image display mode,
press the <W> key.
X On the bottom right, the jump method
and current image location are
indicated.
Press the <V> key to select the
jump method among [1 image/10
images/100 images/Date], then
press <0>.
Jump method
Image location
Browse by jumping.
During image playback, turn the
<6> dial.
2
X The jump display will proceed
according to the selected jump
method.
For single image browsing, press the
<U> key.
Jump is not possible with the index display.
Download from Www.Somanuals.com. All Manuals Search And Download.
125
u/y Magnified View
Magnify the image.
During image playback, press the
<u> button to magnify the image.
If you keep pressing the <u> button,
you can magnify the image up to 10x.
Use the <S> keys to scroll around
the magnified image.
Magnified area
Press the <
magnification. To exit the magnified
view, press the < > button. The
single-image view will return.
I> button to reduce the
x
You can turn the <6> dial to view another image with the magnification
maintained.
Magnified view is not possible during the image review immediately after
the image is taken.
b Rotating the Image
Select [Rotate].
Under the [3] tab, select [Rotate],
1
then press <0>.
Select the image and rotate it.
2
Press the <U> key to select the
image to be rotated, then press
<0>.
Each time you press <0>, the
image will rotate clockwise as follows:
90° → 270° → 0°
To rotate another image, repeat step 2.
To exit the image rotate and return to
the menu, press the <M> button.
If the rotated image is not displayed in the rotated orientation during image
playback, set the [5 Auto rotate] menu to [OnzD].
Download from Www.Somanuals.com. All Manuals Search And Download.
126
3 Auto Playback
You can playback the images in the card as an automatic slide show.
Each image will be displayed for about 4 sec.
Select [Auto play].
1
Under the [3] tab, select [Auto
play], then press <0>.
X The auto play screen will appear.
Start the auto play.
X After [Loading image...] is displayed
for a few seconds, auto play will start.
To pause the auto play, press <0>.
During pause, [ ] will be displayed
on the upper left of the image. Press
2
<0> again to resume the auto play.
Ð
Stop the auto play.
To stop the auto play and return to the
3
menu, press the <M> button.
During auto play, you can press the <B> button to change the display
format.
During pause, you can press the <U> key to view another image.
During auto play, auto power off will not work.
The display time may vary depending on the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Viewing the Images on TV
With the video cable provided with the camera, you can connect the
camera to a TV set and view images on the TV screen. Turn off the
camera and the television before connecting them.
Connect the camera to the TV.
1
Open the camera’s terminal cover.
Use the video cable (provided) to
connect the camera’s <1> video
OUT terminal to the TV monitor’s
VIDEO IN terminal.
Insert the cable plug all the way in.
Turn on the TV and switch the
2 TV’s line input to VIDEO IN.
Video IN terminal
Set the camera’s power switch to
3 <1>.
Press the <x> button.
4
X The image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
After you finish, set the camera’s
power switch to <2>, turn off the
TV, then disconnect the video cable.
If the video system format does not match the TV’s, the images will not
be displayed properly. Set the proper video system format with [6
Video system].
Do not use any video cable other than the one provided. Images might
not be displayed if you use a different video cable.
Depending on the TV monitor, part of the image might be cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
K Protecting Images
Protecting the image prevents it from being erased accidentally.
Select [Protect images].
1
Under the [3] tab, select [Protect
images], then press <0>.
X The protect setting screen will
appear.
Image protect icon
Select the image and protect it.
Press the <U> key to select the
2
image to be protected, then press
<0>.
X When an image is protected, the
<K> icon will appear on the screen.
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat step
2.
To exit the image protection, press
the <M> button. The menu will
reappear.
If you format the card (p.40), the protected images will also be erased.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.
If you erase all the images (p.130), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
L Erasing Images
You can either select and erase images one by one or erase them in
one batch. Protected images (p.129) will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect it.
Erasing a 1+73 image will erase both the RAW and JPEG
images.
Erasing a Single Image
Playback the image to be erased.
1
Press the <L> button.
2
The erase menu will appear at the
bottom of the screen.
Erase the image.
X Select [Erase], then press <0>. The
3
image displayed will be erased.
3 Checkmarking <X> Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time. On the [3 Erase images] menu, select [Select
and erase images]. With the <V> key, checkmark <X> the images
to be erased. Then press the <L> button.
3 Erasing All Images in the Card
When the [3 Erase images] menu is set to [All images on card], all
the images in the card will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
B Shooting Information Display
When you press the <B> button during single-image playback, you
can switch to the shooting information display. The most detailed
shooting information is shown below.
Protect
Folder number - File number
Exposure compensation amount
Flash exposure
compensation amount
Aperture
Histogram
(Brightness/RGB)
Shutter speed
Picture Style and
settings
Metering mode
Shooting mode
ISO speed
Image-recording
quality
Color space
Date and time
Playback number/
Total images
recorded
Original decision (image
verification) data appended
White balance
White balance correction
File size
* With 1+73 images, the 73 file size is displayed.
About the Highlight Alert
When the shooting information is displayed, the overexposed
highlight areas will blink. To obtain more image detail in the
overexposed areas, set the exposure compensation to a negative
amount and shoot again.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
B Shooting Information Display
About the Histogram
The brightness histogram display shows the exposure level
distribution, overall brightness, and gradation. And the RGB
histogram display is for checking the color saturation and gradation.
The display can be switched with the [3 Histogram] menu.
[Brightness] Display
Sample Histograms
This histogram is a graph showing the
distribution of the image’s brightness level. The
horizontal axis indicates the brightness level
(darker on the left and brighter on the right),
while the vertical axis indicates how many
pixels exist for each brightness level. The more
pixels there are toward the left, the darker the
image. And the more pixels there are toward the
right, the brighter the image. If there are too
many pixels on the left, the shadow detail will be
lost. And if there are too many pixels on the
right, the highlight detail will be lost. The
Dark image
Normal brightness
Bright image
gradation in-between will be reproduced. By checking the image and
its brightness histogram, you can see the exposure level inclination
and the overall tone reproduction condition.
[RGB] Display
This histogram is a graph showing the distribution of the image’s
brightness level of each primary color (RGB or red, green, and blue).
The horizontal axis indicates the color’s brightness level (darker on the
left and brighter on the right), while the vertical axis indicates how
many pixels exist for each color brightness level. The more pixels
there are toward the left, the darker and less prominent the color. And
the more pixels there are toward the right, the brighter and denser the
color. If there are too many pixels on the left, the respective color
information will be lacking. And if there are too many pixels on the
right, the color will be too saturated with no detail. By checking the
image’s RGB histogram, you can see the color’s saturation and
gradation condition and white balance inclination.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
8
Printing Images and
Transferring Images to a Computer
Printing (p.134)
You can connect the camera directly to a printer and print
out the images in the card. The camera is compatible with
“wPictBridge” which is the standard for direct printing.
The Web site below gives more information on using your
Canon camera with various printers, such as which paper
types to use.
http://canon.com/pictbridge/
Digital Print Order Format (DPOF) (p.143)
DPOF (Digital Print Order Format) enables you to print
images recorded in the card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
Transferring Images to a Personal Computer (p.147)
By connecting the camera to a personal computer, you can
transfer images from the camera’s card by operating the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
Preparing to Print
You do the direct printing procedure entirely with your camera
while you look at the LCD monitor.
Connecting the Camera to a Printer
Set the camera’s power switch to
<2>.
1
Set up the printer.
2
For details, see the printer’s
instruction manual.
Connect the camera to the
3 printer.
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s <D> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
4
Set the camera’s power switch to
5 <1>.
X Some printers may make a beeping
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
Preparing to Print
Playback the image.
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
wPictBridge
6
X The <l> button lamp will light in
blue.
RAW images are not compatible with direct printing.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
When connecting the camera to the printer, do not use any cable other
than the interface cable provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
1. Press the <x> button to playback the image.
2. Press <0>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. (p.142)
If you use the battery to power the camera, make sure it is fully charged.
With a fully charged battery, printing up to about 6 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E5 (sold separately) to
power the camera is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon
Select the image to be printed.
Check that the <w> icon is
1
displayed on the upper left of the LCD
monitor.
Press the <U> key to select the
image to be printed.
Press <0>.
X The print setting screen will appear.
2
Print setting screen
Sets the printing effects. (p.138)
Sets the date or file number imprinting to on
or off.
Sets the quantity to be printed.
Sets the trimming. (p.141)
Sets the paper size, type, and layout.
Returns to step 1.
Starts the printing.
The paper size, type, and layout you have set will be displayed.
* Depending on the printer, settings such as the date and file number
imprinting and trimming might not be available.
Select [Paper settings].
3
Select [Paper settings], then press
<0>.
X The paper settings screen will
appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
wPrinting
QSetting the Paper Size
YSetting the Paper Type
Select the size of the paper loaded in
the printer, then press <0>.
X The paper type screen will appear.
Select the type of the paper loaded in
the printer, then press <0>.
When using a Canon printer and
Canon paper, read the printer’s
instruction manual to check what
paper types can be used.
X The page layout screen will appear.
USetting the Page Layout
Select the page layout, then press
<0>.
X The print setting screen will reappear.
Bordered
The print will have a white border along the edges.
The print will have no white borders. If your printer cannot print
borderless prints, the print will have borders.
Borderless
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
Borderedc
xx-up
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
On A4 or Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF (p.143) will be printed.
• [20-upc] will have the shooting information* imprinted.
20-upc
35-upp
The page layout will vary depending on the printer type or its
settings.
Default
* From the Exif data, the camera name, lens name, shooting mode, shutter speed,
aperture, exposure compensation amount, ISO speed, white balance, etc., will be
imprinted.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
wPrinting
Set the printing effects.
4
Set as necessary. If you need not set
any printing effects, go to step 5.
The screen display may differ
depending on the printer.
Select the option on the upper right,
then press <0>. Select the desired
printing effect, then press <0>.
If the <e> icon is displayed next to
<z>, you can also adjust the
printing effect. (p.140)
Printing Effect
Description
Same as the printing characteristics turned “On”. No automatic
correction will be performed.
EOff
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
corrections.
EOn
The image will be printed with higher saturation to produce
more vivid blues and greens.
EVivid
ENR
The image noise is reduced before printing.
Effective in backlit conditions which can make the subject’s
face look dark. The face will be brightened for printing.
EFacek
Effective in flash images where the subject has red eye. The
red eye is corrected before printing.
ERed-Eye1
Prints in black-and-white with true blacks.
0 B/W
Prints in black-and-white with cool, bluish blacks.
Prints in black-and-white with warm, yellowish blacks.
Warm tone
0 Cool tone
0
Prints the image in the actual colors and contrast. No automatic
color adjustments will be applied.
zNatural
zNatural M
EDefault
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing adjustments
than with “Natural.”
The printing will differ depending on the printer. For details, see
the printer’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
wPrinting
*
When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 140.
Set the date and file number
5 imprinting.
Set as necessary.
Select <I>, then press <0>.
Set as desired, then press <0>.
Set the number of copies.
Set as necessary.
Select <R>, then press <0>.
Set the number of copies, then press
<0>.
6
Start printing.
Select [Print], then press <0>.
X The <l> button’s blue lamp will
7
blink and the printing will start.
To print another image with the same settings in easy printing, select the
image and just press the <l> button lit in blue. With easy printing,
the number of copies will always be 1. Also, any trimming will not be
applied.
For details on trimming, see page 141.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
To stop the printing, press <0> while [Stop] is displayed, then select
[OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
139
wPrinting
e Adjustment of Printing Effects
In step 4 on page 138, select the printing
effect. When the <e> icon is displayed
next to <z>, press the <B>
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the adjust levels screen displayed, press
the <B> button to change the position of
the <h>. Press the <U> key to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show up on the
screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use the <S> keys. B is for blue, A is amber, M is magenta,
and G is green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
Download from Www.Somanuals.com. All Manuals Search And Download.
140
wPrinting
Trimming the Image
You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and proportion.
The image area within the trimming frame will be printed. The
trimming frame’s vertical-to-horizontal proportion can be changed
with [Paper settings].
Changing the trimming frame size
When you press the <u> or <I> button, the size of the
trimming frame will change. The smaller the trimming frame, the
larger the image magnification will be for the printing.
Moving the trimming frame
Press the <S> keys to move the frame over the image vertically
or horizontally. Move the trimming frame until it covers the desired
image area or composition.
Rotating the frame
Each time you press the <B> button, the trimming frame will
toggle between the vertical and horizontal orientations. This
enables you to create a vertical-oriented print from a horizontal
image.
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
141
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After fixing the
problem, resume printing. For details on how to fix a printing problem, refer
to the printer’s instruction manual.
Paper error
Check whether the paper is properly loaded in the printer.
Ink error
Check the printer’s ink level, and check the waste ink tank.
Hardware error
Check for any printer problems other than paper and ink problems.
File error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
W Digital Print Order Format (DPOF)
Set the print type, date imprinting, and file No. imprinting. The print
settings will be applied to all print-ordered images. (They cannot be set
individually for each image.)
Setting the Printing Options
Select [Print order].
1
X Under the [3] tab, select [Print
order], then press <0>.
Select [Set up].
Select [Set up], then press <0>.
2
Set the options as desired.
3
Set the [Print type], [Date], and [File
No.].
Select the option, then press <0>.
Select the desired setting, then press
<0>.
[Print type]
[Date]
[File No.]
Download from Www.Somanuals.com. All Manuals Search And Download.
143
W Digital Print Order Format (DPOF)
Standard
Prints one image on one sheet.
K
Multiple, thumbnail images are printed on
one sheet.
Index
L
Print type
K
Both
L
Prints both the standard and index prints.
On
Date
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
Off
On
Off
File No.
Exit the setting.
4
Press the <7> button.
X The print order screen will reappear.
Next, select [Sel.Image] or [All
image] to order the images to be
printed.
Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
Print ordering will not work with RAW images.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
Press the <I> button to display the
three-image view. To return to the single-
image display, press the <u> button.
After completing the print order, press
the <M> button to save the print
order to the card.
[Standard] [Both]
Press the <V> key to set the number
of copies to be printed for the displayed
image.
Quantity
Total images selected
[Index]
Press the <V> key to checkmark the
box <X> and the image will be included
in the index print.
Check mark
Index icon
All image
If you select [Mark all on card], one copy of all the images in the
card will be set for printing. If you select [Clear all on card], the print
order will be cleared for all the images in the card.
Note that RAW images will not be included in the print order even if you
set “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
W
Direct Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1 Prepare to print.
See page 134.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2 Under the [3] tab, select [Print order].
3 Select [Print].
[Print] will be displayed only if the camera is connected to the
printer and printing is possible.
4 Set the [Paper settings]. (p.136)
Set the printing effects (p.138) if necessary.
5 Select [OK].
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, the date might be imprinted on the border, depending on the printer.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
•
Before resuming, you changed the print order or erased any images selected for the
print order. For index printing, you changed the paper settings before resuming the
printing. Or the card’s remaining capacity was low when the printing was stopped.
If a problem occurs during printing, see page 142.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
d
Transferring Images to a Personal Computer
By connecting the camera to a personal computer, you can transfer
images from the camera’s card by operating the camera. This is called
direct image transfer.
Before connecting the camera to the personal computer, be
sure to install the bundled software (EOS DIGITAL Solution
Disk/CD-ROM) in the personal computer. For instructions on
how to install the software, see “CD-ROM Guide.”
Preparation for Image Transfer
Connect the camera to the
personal computer.
Turn off the camera’s power switch
before connecting it.
1
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s <D> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
To the personal computer’s USB port,
connect the plug on other end of the
cable.
Set the camera’s power switch to
2 <1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
When the camera model selection
screen appears, select your camera’s
model.
X The [EOS Utility] screen will appear
on the computer, and the direct
image transfer screen will appear on
the camera’s LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
d Transferring Images to a Personal Computer
Shooting will be disabled while the direct transfer screen is displayed.
If the [EOS Utility] screen does not appear, see Software Instruction
Manual in the CD-ROM.
Before disconnecting the cable, turn off the camera. Pull out the cable by
grasping the plug (instead of the cord).
Transferring Images to a Personal Computer
The images sent to the personal computer will be saved in the [My
Pictures] folder or [Pictures] folder in subfolders organized according
to shooting date.
Transfer all the images in the card
to the personal computer.
Select [All images], then press the
<l> button.
X The <l> button’s blue lamp will
blink and the image transfer will start.
X When the image transfer is
completed, the lamp will stay on.
Options other than [All images] are explained below. To start the image
transfer, press the <l> button.
New images
Images which have not yet been transferred to the personal
computer will be selected by the camera automatically and
transferred.
Transfer order images
You select the images and they are transferred to the personal
computer in a batch. To select the images, follow the instructions on
the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
d Transferring Images to a Personal Computer
Select & transfer
Press the <U> key to select images
one by one to be transferred to the
personal computer. To exit, press the
<M> button.
Wallpaper
The image you select and transfer will appear as the personal
computer’s wallpaper. To exit, press the <M> button.
If you press <0> instead of the <l> button, the confirmation dialog
will appear. Select [OK], then press <0> to start the transfer.
RAW images cannot be transferred as wallpaper.
3 Selecting the Images to be Transferred
You select the image to be transferred to the personal computer one by
one.
Select [Transfer order].
1
Under the [3
] tab, select [Transfer
>.
order], then press <
0
X The transfer order screen will appear.
Select [Sel.Image].
Select [Sel.Image], then press <0>.
X An image will appear.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
149
d Transferring Images to a Personal Computer
Select the image to be
3 transferred.
Press the <U> key to select an
image, then press the <V> key to
place a checkmark <X> on the upper
left.
Repeat this step for all the images
you want to transfer. You can select
up to 998 images to be transferred.
Press the <M> button twice to
save the image selections to the card.
The menu will then reappear.
About [All image]
In step 2, if you select [All image], the
screen on the left will appear. If you then
select [Mark all on card] and press
<0>, up to 998 images will be
transferred in one batch.
If you select [Clear all on card] and
press <0>, all your image selections for
transfer will be canceled.
Do not put into the camera any images whose transfer order was set by a
different camera and then try to specify another transfer order. The images
in the transfer order might all be overwritten. Also, depending on the image
type, the transfer order may not be possible.
If a 1+73 image is selected for transfer, it will be counted as one
image even though both the RAW and JPEG images will be transferred
to the personal computer.
In step 3, press the <I> button to see a three-image display. To
return to the single-image display, press the <u> button.
If you want to transfer more than 999 images in one batch, select [All
image] on the direct transfer screen. (p.148)
Download from Www.Somanuals.com. All Manuals Search And Download.
150
9
Customizing the
Camera
You can customize various camera features to suit your
picture-taking preferences. You can do it with Custom
Functions. Custom Functions can be set and used only
in Creative Zone modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
3 Setting Custom FunctionsN
Select [Custom Functions (C.Fn)].
Under the [7] tab, select [Custom
Functions (C.Fn)], then press <0>.
1
Custom Function No.
Select the Custom Function No.
2
Press the <U> key to select the
number of the Custom Function to be
set, then press <0>.
Change the setting as desired.
3
Press the <V> key to select the
desired setting (number), then press
<0>.
Repeat steps 2 and 3 if you want to
set other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
numbers.
Exit the setting.
Press the <M> button to return
4
to the menu.
Clearing All Custom Functions
On the [7 Clear settings] menu, select [Clear all Custom Func.
(C.Fn)] to clear all the Custom Function settings. (p.114)
Download from Www.Somanuals.com. All Manuals Search And Download.
152
3 Setting Custom FunctionsN
Custom Functions
C.Fn I: Exposure
1
2
Exposure level increments
Flash sync. speed in Av mode
p.154
C.Fn II: Image
3
4
5
Long exposure noise reduction
p.155
p.156
High ISO speed noise reduction
Auto Lighting Optimizer
C.Fn III: Auto focus/Drive
6
7
8
AF-assist beam firing
AF during Live View shooting
Mirror lockup
p.157
C.Fn IV: Operation/Others
Shutter/AE lock button
9
p.158
p.159
10 SET button when shooting
11 LCD display when power ON
12 Add original decision data
The Custom Functions whose numbers are shaded do not function during
Live View shooting. (Settings are disabled.) If C.Fn-7-1/2 has been set and
you want to use AE lock, set C.Fn-9-1.
Download from Www.Somanuals.com. All Manuals Search And Download.
153
3 Custom Function SettingsN
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Auto focus/Drive, C.Fn
IV: Operation/Others.
C.Fn I: Exposure
C.Fn-1
Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, etc. Effective when you prefer to control the
exposure in less fine increments than 1/3-stop increments.
The exposure level will be displayed in the viewfinder and on the LCD
monitor as shown below.
C.Fn-2
0: Auto
Flash sync. speed in Av (Aperture-priority AE) mode
The flash sync speed is set automatically within a range of 1/200 sec. to
30 sec. to suit the scene’s brightness.
1: 1/200 sec. (fixed)
If you use the <f> mode (aperture-priority AE) for flash photography,
the shutter speed will be set to 1/200 sec. You need not worry about
camera shake.
(However, night scene or dark backgrounds will look darker in this
mode.)
Download from Www.Somanuals.com. All Manuals Search And Download.
154
3 Custom Function SettingsN
C.Fn II: Image
C.Fn-3
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
Long exposure noise reduction
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures 1 sec. or longer. The [On]
setting may be effective for noise that cannot be detected or reduced
with the [Auto] setting.
After the picture is taken, the noise reduction process may take the same
amount of time as the exposure. You cannot take another picture until
the noise reduction process is completed.
With setting 2, if a long exposure is made during Live View shooting, the
LCD monitor will not display anything (no Live View image display) while
noise reduction is applied.
C.Fn-4
0: Off
1: On
High ISO speed noise reduction
Reduces the noise generated in the image. Although noise reduction is
applied at all ISO speeds, it is particularly effective at high ISO speeds.
At low ISO speeds, the noise in the shadow areas is further reduced.
With setting 1, continuous shooting and white balance bracketing cannot be
used.
Download from Www.Somanuals.com. All Manuals Search And Download.
155
3 Custom Function SettingsN
C.Fn-5
Auto Lighting Optimizer
0: Enable
If the image comes out too dark or the contrast is too low, the image
brightness and contrast are corrected automatically. (Depending on the
shooting conditions, image noise may increase.) This function will not
work with manual exposures nor 1 and 1+73 images.
In the Basic Zone modes, the Auto Lighting Optimizer will operate
automatically.
B
1: Disable
Download from Www.Somanuals.com. All Manuals Search And Download.
156
3 Custom Function SettingsN
C.Fn III: Auto focus/Drive
C.Fn-6 AF-assist beam firing
The AF-assist beam can be emitted by the camera’s built-in flash or by the
external, EOS-dedicated Speedlite.
0: Enable
1: Disable
AF-assist beam not emitted.
2: Only external flash emits
If an external, EOS-dedicated Speedlite is attached, it will emit the AF-
assist beam when necessary. The camera’s built-in flash will not emit
the AF-assist beam.
If the external, EOS-dedicated Speedlite’s [AF-assist beam firing]
Custom Function is set to [Disabled], the Speedlite will not emit the AF-
assist beam even if the camera’s C.Fn-6-0/2 is set.
C.Fn-7
AF during Live View shooting
When 1 or 2 is set, AF will be possible during Live View shooting. For
details, see pages 102 - 106.
0: Disable
1: Quick mode (p.102)
2: Live mode (p.104)
C.Fn-8
Mirror lockup
0: Disable
1: Enable
Prevents camera vibrations caused by the reflex mirror action which can
disturb shooting with super telephoto lenses or close-up (macro)
shooting. See page 94 for the mirror lockup procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
3 Custom Function SettingsN
C.Fn IV: Operation/Others
C.Fn-9
Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
Convenient when you want to focus and meter separately. Press the
<A> button to autofocus and press the shutter button halfway to attain
AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <A> button to stop the AF
operation momentarily. This prevents the AF from being thrown off by
any obstacle passing between the camera and subject. The exposure is
set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <A> button to start or stop
the AI Servo AF operation. The exposure is set at the moment the
picture is taken. Thus, the optimum focusing and exposure will always
be achieved as you wait for the decisive moment.
C.Fn-10 SET button when shooting
You can assign a frequently-used function to <0>. When the camera is
ready to shoot, you can press <0>.
0: LCD monitor On/Off
Gives the same function as the <B> button.
1: Change quality
After pressing <0>, look at the LCD monitor and press the <S> key to
set the image-recording quality directly.
2: Flash exposure compensation
When you press <0>, the flash exposure compensation screen
appears so you can quickly change the setting.
3: Menu display
Gives the same function as the <M> button.
4: Disabled
Download from Www.Somanuals.com. All Manuals Search And Download.
158
3 Custom Function SettingsN
If the [Live View shoot.] menu has been set to [Enable], the Live View
shooting will override any setting from 1 to 4. When the camera is ready to
shoot, pressing <0> will show the Live View image instead.
C.Fn-11 LCD display when power ON
0: Display
When the power switch is turned on, the shooting settings will be
displayed (p.42).
1: Retain power OFF status
If you pressed the <B> button and turned off the camera while the
LCD monitor was off, the shooting settings will not be displayed when
you turn on the camera again. This helps to save battery power. The
menu screens and image playback will still be displayed when used.
If you pressed the <B> button and turned off the camera while the
LCD monitor was on, the shooting settings will be displayed when you
turn on the camera again.
C.Fn-12 Add original decision data
0: Off
1: On
Data for verifying whether the image is original or not is appended to the
image automatically. When the shooting information of an image
appended with the verification data is displayed (p.131), the <L> icon
will appear.
To verify whether the image is original, the Original Data Security Kit
OSK-E3 (sold separately) is required.
The images are not compatible with the image encryption/decryption
features of Original Data Security Kit OSK-E3.
Download from Www.Somanuals.com. All Manuals Search And Download.
159
3
Registering My MenuN
For faster access, you can register up to six menus and Custom
Functions whose settings you change frequently.
Select [My Menu settings].
1
Under the [9] tab, select [My Menu
settings], then press <0>.
Select [Register].
Select [Register], then press <0>.
2
Register the desired menus.
3
Select a menu, then press <0>.
When the confirmation dialog
appears and you select [OK] and
press <0>, the menu will be
registered.
Repeat this procedure to register up
to six menus.
To return to the screen in step 2,
press the <M> button.
My Menu settings
[Sort] and other settings displayed in step 2 are as follows:
Sort
You can change the order of the registered menu items in My Menu.
Select [Sort] and select the menu item whose order you want to
change. Then press <0>. With [z] displayed, press the <V>
key to change the order, then press <0>.
Display from My Menu
When [Enable] is set, the [9] tab will be displayed first when you
display the menu screen.
Delete and Delete all items
Deletes the registered menu items. [Delete] deletes one menu item
at a time, and [Delete all items] deletes all menu items.
Download from Www.Somanuals.com. All Manuals Search And Download.
160
10
Reference
This chapter provides reference information for camera
features, system accessories, etc. The back of this
chapter also has an index to make it easier to look up
things.
Download from Www.Somanuals.com. All Manuals Search And Download.
161
When Autofocus Fails
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects difficult to focus
Low-contrast subjects
Example: Blue sky, solid-color walls, etc.
Subjects in low light
Extremely backlit or reflective subjects
Example: Car with a reflective body, etc.
Near and far subjects covered by an AF point
Example: Animal in a cage, etc.
Repetitive patterns
Example: Skyscraper windows, computer keyboards, etc.
In such cases, do one of the following:
(1) With One-Shot AF, focus an object at the same distance as the
subject and lock the focus before recomposing. (p.46)
(2) Set the lens focus mode switch to <MF> and focus manually.
If an Extender (sold separately) is attached and the maximum aperture of
the lens is f/5.6 or smaller (larger f/number), AF will not be possible
(except Live mode AF). For details, see the Extender’s instruction
manual.
For the cases AF can fail to achieve focus with Live mode AF, see
page 106.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Using a Household Power Outlet
With AC Adapter Kit ACK-E5 (sold separately), you can connect the
camera to a household power outlet and not worry about the battery
level.
Connect the power cord.
1
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
Connect the DC Coupler DR-E5.
2
Connect the cord’s plug to the DC
Coupler DR-E5.
Insert the DC Coupler.
3
Open the cover and insert the DC
Coupler until it locks in place.
Push in the DC cord.
4
Open the DC cord hole cover and
install the cord as shown.
Close the cover.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1>.
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Using the Remote Switch
Remote Switch RS-60E3 (Sold separately)
Remote switch with a 60 cm/2.0 feet cord for pressing the shutter button
halfway or completely. It connects to the camera’s remote control terminal.
The camera is not compatible with Remote Controller RC-1 and RC-5 (both
sold separately).
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Using the Remote Switch
Using the Eyepiece Cover
If you take a picture without looking at the viewfinder, light entering the
eyepiece can throw off the exposure. To prevent this, use the eyepiece
cover (p.22) attached to the camera strap.
Remove the eyecup.
1
Push the bottom of the eyecup
upward.
Attaching the eyepiece cover.
2
Slide the eyepiece cover down into
the eyepiece groove to attach it.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
External Speedlites
EOS-dedicated, EX-series Speedlites
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite is attached to the camera, almost all the
autoflash control is done by the camera. In other words, it is like a high-
output flash attached externally in place of the built-in flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features of
EX-series Speedlites.
Shoe-mount Speedlites
Macro Lites
Only [Flash exp. comp] and [E-TTL II] can be settable for flash function
settings (p.117) with an EX-series Speedlite not controllable by the camera.
(For some EX-series Speedlites, [Shutter sync.] can also be settable.)
Download from Www.Somanuals.com. All Manuals Search And Download.
166
External Speedlites
Canon Speedlites other than the EX-series
With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL
autoflash mode, the flash can be fired at full output only. Set the
camera’s shooting mode to <a> (manual exposure) or <f>
(aperture-priority AE) and shoot.
When using a Speedlite which has manual flash mode, shoot in the
manual flash mode.
With an EX-series Speedlite set to TTL autoflash with the flash’s
Custom Function, the flash will fire at full output only.
Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with compact, non-Canon flash units at
1/200 sec. or slower. Be sure to test the flash unit beforehand to make
sure it synchronizes properly with the camera.
Cautions for Live View shooting
A non-Canon flash will not fire during Live View shooting.
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
167
Menu Settings
1 Shooting 1 (Red)
page
64
73 / 83 / 74 / 84 / 76 / 86 /
1+73 / 1
Quality
Red-eye On/Off
Beep
Off / On
59
On / Off
108
108
108
Shoot w/o card
Review time
On / Off
Off / 2 sec. / 4 sec. / 8 sec. / Hold
2 Shooting 2 (Red)
AEB
1/3-stop increments, ±2 stops
1/3-stop increments, ±2 stops
Manual setting of white balance
80
79
90
Flash exp comp
Custom WB
WB correction: White balance correction
WB-BKT: White balance bracketing
92
93
WB SHIFT/BKT
Color space
sRGB / Adobe RGB
87
67
82
85
Standard / Portrait / Landscape / Neutral /
Faithful / Monochrome / User Def. 1, 2, 3
Picture Style
Dust Delete Data
Obtains data to be used to erase dust spots
119
3 Playback (Blue)
Protect images
Rotate
Erase-protect image
129
126
130
143
Rotate vertical image
Erase image
Erase images
Print order
Specifies images to be printed (DPOF)
Select images to be transferred to a personal
computer
Transfer order
149
Histogram
Auto play
Brightness / RGB
132
127
Auto playback of images
The [2] Shooting 2, [7] Set-up 3, and [9] My Menu screens (tabs)
are not displayed in Basic Zone modes.
Shaded menu items are not displayed in Basic Zone modes.
In Basic Zone modes, the 1 and 1+73 recording quality modes
are not displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
168
Menu Settings
page
5 Set-up 1 (Yellow)
30 sec. / 1min. / 2 min. / 4 min. / 8 min. / 15 min.
/ Off
Auto power off
109
File numbering
Auto rotate
Format
Continuous / Auto reset / Manual reset
On PD / On D / Off
110
112
40
Initialize and erase data in the card
Shutter btn. / Shutter/DISP / Remains on
Select the background color
LCD off/on btn
Screen color
115
115
6 Set-up 2 (Yellow)
LCD brightness
Seven brightness levels provided
109
29
Set the date (year, month, day) and time (hour,
min., sec.)
Date/Time
Language
Select the interface language
NTSC / PAL
30
Video system
128
118
121
Auto cleaning / Clean now
Clean manually
Sensor cleaning
Live View function
settings
Live View shooting / Grid display /
Metering timer
96
Flash firing / Built-in flash function setting /
External flash function setting / External flash
C.Fn setting / Clear external flash C.Fn setting
Flash control
116
7 Set-up 3 (Yellow)
Custom Functions
(C.Fn)
Customize the camera as desired
152
Clear all camera settings / Clear all Custom
Func. (C.Fn)
Clear settings
Firmware Ver.
114
-
For updating the firmware
9 My Menu (Green)
Register frequently-used menu items and
Custom Functions
My Menu settings
160
Download from Www.Somanuals.com. All Manuals Search And Download.
169
Function Availability Table
o: Set automatically k: User selectable
: Not selectable
Creative Zone
s f
Basic Zone
Mode Dial
1
2
3
4
5
6
7
d
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
a
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
8
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o
JPEG
RAW
k
k
k
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
RAW + 73
Auto
o
o
o
o
o
o
o
o
o
o
o
o
Manual
Standard
Portrait
Landscape
Neutral
o
Faithful
Monochrome
User Defined
sRGB
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Adobe RGB
Auto WB
Preset WB
Custom WB
WB correction
WB bracketing
Auto Lighting Optimizer
One-Shot
AI Servo
o
o
o
o
o
o
o
o
o
o
o
o
o
AI Focus
o
o
o
o
AF
AF
Auto
o
o
o
o
o
o
o
o
k
point
Manual
selection
AF-assist beam
o
Download from Www.Somanuals.com. All Manuals Search And Download.
170
Function Availability Table
o: Set automatically k: User selectable
Basic Zone
: Not selectable
Creative Zone
Mode Dial
1
2
3
4
5
6
7
d
k
k
k
k
k
k
k
k
k
k
k
k
k
s f
a
k
k
k
8
k
Evaluative
Partial
o
o
o
o
o
o
o
k
k
k
k
k
k
k
Center-weighted
average
k
Program shift
Exposure
compensation
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
AEB
k
AE lock
Depth-of-field preview
Single
k
k
k
k
k
k
o
k
o
k
k
o
k
o
k
o
k
k
Continuous
10 sec. self-timer
2 sec. self-timer
o
k
o
k
Continuous shots
after self-timer
k
o
k
o
k
o
k
o
k
o
Auto
Manual
k
k
k
k
k
Flash off
Red-eye reduction
FE lock
o
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Flash exposure
compensation
Live View shooting
Download from Www.Somanuals.com. All Manuals Search And Download.
171
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power
The camera does not operate even when the power switch is
set to <1>.
The battery is not properly installed in the camera. (p.26)
Recharge the battery. (p.24)
Make sure the battery compartment cover is closed. (p.26)
Make sure the card slot cover is closed. (p.31)
Press the <B> button. (p.42)
The access lamp still blinks even when the power switch is
set to <2>.
If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. After the image is recorded to
the card, the camera turns off automatically.
The battery becomes exhausted quickly.
Use a fully-charged battery. (p.24)
The rechargeable battery will degrade after repeated use. Purchase a
new one.
The camera turns off by itself.
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].
Even if [5 Auto power off] has been set to [Off], the LCD monitor will
turn off after the camera is idle for 30 min. Press the <B> button to
turn on the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
172
Troubleshooting Guide
Shooting
No images can be shot or recorded.
The card is not properly inserted. (p.31)
If the card is full, replace the card or delete unnecessary images to
make room. (p.31, 130)
If you try to focus in the One-Shot AF mode while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually. (p.37, 62)
Slide the card’s write-protect switch to the Write/Erase setting. (p.31)
The LCD monitor does not display a clear image.
If dust is adhering to the LCD monitor, wipe with a lens cloth or soft
cloth.
In low or high temperatures, the LCD monitor display may seem slow
or it might look black. It will return to normal at room temperature.
The image is out of focus.
Set the lens focus mode switch to <AF>. (p.33)
To prevent camera shake, hold the camera still and press the shutter
button gently. (p.36, 37)
The card cannot be used.
If a card error message is displayed, see page 40 or 175.
The camera makes a noise when it is shaken.
The built-in flash’s pop-up mechanism moves slightly. This is normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
173
Troubleshooting Guide
The built-in flash does not fire.
If you shoot continuously with the built-in flash at short intervals, the
flash might stop operating to protect the flash unit.
Image Review & Operation
The image cannot be erased.
If the image has been erase-protected, it cannot be erased. (p.129)
The shooting date and time displayed is incorrect.
The correct date and time has not been set. (p.29)
No image appears on the TV screen.
Make sure the video cable plug is connected all the way in. (p.128)
Set the video OUT format (NTSC/PAL) to the same video format as
the TV. (p.169)
Use the video cable that came with the camera. (p.128)
Download from Www.Somanuals.com. All Manuals Search And Download.
174
Error Codes
If there is a problem with the camera, an
error message appears. Follow the on-
screen instructions.
Error code
To recover from the error screen, turn the
power switch off and on, or remove and
reinstall the battery.
If error 02 (Card problem) is displayed,
remove and reinstall the card or format
the card. This may resolve the problem.
Countermeasures
If the same error keeps occurring, there may be a problem. Write
down the error code and consult your nearest Canon Service
Center.
If an error code appears right after shooting, the picture might not have been
captured. After the error is resolved, press the <x> button and check if the
picture was captured.
Download from Www.Somanuals.com. All Manuals Search And Download.
175
System Map
Eyepiece Extender
EP-EX15ll
ST-E2 220EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite
Rubber Frame Ef
MR-14EX
MT-24EX
E-series Dioptric
Adjustment Lenses
Bundled
Accessories
Eyecup Ef
Wide Strap
Angle Finder C
EW-100DB lll
Semi Hard Case
EH19-L
Battery Pack
LP-E5
AC Adapter Kit
ACK-E5
Battery Grip
BG-E5
Battery Charger
LC-E5 or LC-E5E
DC Coupler
DR-E5
Car Battery Charger
CBC-E5
Compact Power
Adapter
CA-PS700
Battery Magazine
BGM-E5L for two
LP-E5 battery packs
Battery Magazine
BGM-E5A for
size-AA batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
176
System Map
Remote Switch
RS-60E3
EF lenses
EF-S lenses
Video Cable
VC-100
TV/Video
EOS DIGITAL
EOS DIGITAL
Solution Disk Software Instruction
Manuals Disk
PictBridge-compatible printer
Interface Cable
IFC-200U
Interface Cable IFC-500U
Personal
computer
USB port
Windows Vista
Windows XP
Windows 2000
Mac OS X
Original Data
Security Kit
Card reader
PC card slot
OSK-E3
SD memory card/
PCMCIA adapter
SDHC memory card
Download from Www.Somanuals.com. All Manuals Search And Download.
177
Specifications
• Type
Type:
Digital, single-lens reflex, AF/AE camera with built-in flash
Recording media:
Image sensor size:
Compatible lenses:
SD memory card, SDHC memory card
22.2 mm x 14.8 mm
Canon EF lenses (including EF-S lenses) (35mm-equivalent
focal length is approx.1.6 times the lens focal length)
Canon EF mount
Lens mount:
• Image Sensor
Type:
Pixels:
High-sensitivity, high-resolution, large single-plate CMOS sensor
Effective pixels: Approx. 10.10 megapixels
Total pixels: Approx. 10.50 megapixels
3:2
Aspect ratio:
Color filter system:
Low-pass filter:
RGB primary color filter
Located in front of the image sensor, non-removable
Dust deletion feature: (1) Automatic sensor cleaning
(2) Manual cleaning of sensor
(3) Dust Delete Data appended to the captured image
• Recording System
Recording format:
Image type:
Design rule for Camera File System 2.0
JPEG, RAW (12-bit Canon original)
RAW+JPEG
simultaneous recording: Provided
File size:
(1) Large/Fine
(2) Large/Normal
(3) Medium/Fine
:
:
:
Approx. 3.8 MB (3888 x 2592 pixels)
Approx. 2.0 MB (3888 x 2592 pixels)
Approx. 2.3 MB (2816 x 1880 pixels)
(4) Medium/Normal: Approx. 1.2 MB (2816 x 1880 pixels)
(5) Small/Fine
(6) Small/Normal
(7) RAW
:
:
Approx. 1.3 MB (1936 x 1288 pixels)
Approx. 0.7 MB (1936 x 1288 pixels)
: Approx. 9.8 MB (3888 x 2592 pixels)
* Exact file sizes depend on the subject, ISO speed,
Picture Style, etc.
File numbering:
Consecutive numbering, auto reset, manual reset
• Image Processing
Color space:
sRGB, Adobe RGB
Picture Styles:
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
White balance:
Auto, daylight, shade, cloudy, tungsten, white fluorescent
light, flash, custom
Download from Www.Somanuals.com. All Manuals Search And Download.
178
Specifications
Color temperature
compensation:
White balance correction: ±9 stops in full-stop increments
White balance bracketing: ±3 stops in full-stop increments
*
Blue/amber direction or magenta/green direction possible
Color temperature
information transmission: Provided
Noise reduction:
Noise reduction for long exposures
High ISO speed noise reduction
Automatic image
brightness correction: Auto Lighting Optimizer
Add original image
verification data:
Provided (Verified by Original Data Security Kit OSK-E3)
• Viewfinder
Type:
Eye-level pentamirror
Coverage:
Magnification:
Eyepoint:
Vertical/Horizontal approx. 95%
Approx. 0.81x (-1 m with 50mm lens at infinity)
Approx. 21 mm (from eyepiece lens center)
-1
-1
Built-in dioptric adjustment: -3.0 - +1.0 m (dpt)
Focusing screen:
Mirror:
Fixed, Precision Matte
Quick-return half mirror (Transmission:reflection ratio of
40:60, no mirror cut-off with EF 600mm f/4L IS USM or
shorter lenses)
Viewfinder information: AF information (AF points, focus confirmation light), exposure
information (shutter speed, aperture, AE lock, exposure level,
ISO speed, exposure warning), flash information (flash ready,
high-speed sync, FE lock, flash exposure compensation),
monochrome shooting, white balance correction, maximum
burst, memory card information
Depth-of-field preview: Enabled with depth-of-field preview button
• Autofocus
Type:
AF points:
TTL secondary image-registration, phase detection
7 AF points
Metering range:
Focus modes:
AF point selection:
EV 0.5 - 18 (at 23°C/73°F, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF)
Automatic selection, manual selection
Selected AF point display: Superimposed in viewfinder and indicated on LCD monitor
AF-assist beam:
Small series of flashes fired by built-in flash
Effective range: Approx. 4.0 m/13.1 ft. at center, approx.
3.5 m/11.5 ft. at periphery
Download from Www.Somanuals.com. All Manuals Search And Download.
179
Specifications
• Exposure Control
Metering modes:
35-zone TTL full-aperture metering
• Evaluative metering (linkable to any AF point)
• Partial metering (approx. 10% of viewfinder at center)
• Center-weighted average metering
Metering range:
EV 1 - 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens,
ISO 100)
Exposure control:
Program AE (Full Auto, Portrait, Landscape, Close-up,
Sports, Night Portrait, Flash Off, Program), shutter-
priority AE, aperture-priority AE, depth-of-field AE,
manual exposure, E-TTL II autoflash
ISO speed (Recommended
Exposure Index):
Basic Zone modes: ISO 100 - 800 set automatically
Creative Zone modes: ISO 100 - 1600
(in 1-stop increments), Auto
Exposure compensation: Manual: ±2 stops in 1/3- or 1/2-stop increments
(can be combined with AEB)
AEB: ±2 stops in 1/3- or 1/2-stop increments
AE lock:
Automatic: When focus achieved with evaluative
metering and One-Shot AF
Manual: By AE lock button
• Shutter
Type:
Shutter speeds:
Electronically-controlled, focal-plane shutter
1/4000 sec. to 1/60 sec., X-sync at 1/200 sec.
1/4000 sec. to 30 sec., bulb (Total shutter speed range.
Available range varies by shooting mode.)
Soft-touch electromagnetic release
Shutter release:
Self-timer:
10-sec. or 2-sec. delay or 10-sec. delay plus continuous
shooting
• Built-in Flash
Type:
Flash metering:
Guide No.:
Retractable, auto pop-up flash
E-TTL II autoflash
13/43 (ISO 100, in meters/feet)
Approx. 3 sec.
Recycle time:
Flash-ready indicator: Flash-ready icon lights in viewfinder
Flash coverage: 17mm lens angle of view
Flash exposure compensation: ±2 stops in 1/3- or 1/2-stop increments
FE lock: Provided
Download from Www.Somanuals.com. All Manuals Search And Download.
180
Specifications
• External Speedlite
Compatible flash:
Flash metering:
Flash exposure
compensation:
FE lock:
EX-series Speedlites
E-TTL II autoflash
±2 stops in 1/3- or 1/2-stop increments
Provided
External flash settings: Flash function settings, Flash C.Fn settings
Zooming to match lens
focal length:
Provided
• Drive System
Drive mode:
Single shooting, continuous shooting, self-timer (10-sec.,
2-sec., multiple shots)
Continuous shooting speed: JPEG
RAW
RAW+73
:
Max. approx. 3 shots/sec.
Max. approx. 1.5 shots/sec.
Max. approx. 1.5 shots/sec.
:
:
Maximum burst:
JPEG (Large/Fine): Approx. 514, RAW: Approx. 5,
RAW+JPEG (Large/Fine): Approx. 4
* Based on Canon’s testing standards with a 2GB SD
memory card, ISO 100, and Standard Picture Style
* Varies depending on the subject, memory card brand,
image-recording quality, etc.
• Live View Functions
Shooting modes:
(1) Live View shooting
(2) Remote Live View shooting
(with a personal computer installed with EOS Utility)
Manual focus
Focusing:
Autofocus (Quick mode, Live mode)
Evaluative metering with the image sensor
EV 0 - 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens,
ISO 100)
Metering modes:
Metering range:
Grid display:
Provided
Exposure display:
Simulated exposure displayed in real-time
• LCD Monitor
Type:
Monitor size:
Dots:
TFT color liquid-crystal monitor
2.5 in.
Approx. 230,000
Approx. 100%
Coverage:
Download from Www.Somanuals.com. All Manuals Search And Download.
181
Specifications
Brightness adjustment: 7 levels provided
Interface languages:
20
• Image Playback
Display format:
Single image, single image + image-recording quality,
shooting information, histogram, 4- or 9-image index,
magnified view (approx. 1.5x - 10x), rotated image,
image jump (by 1/10/100 images, or shooting date)
Provided (Overexposed highlights blink)
Highlight alert:
• Image Protection and Erase
Protect:
Erase:
Single images can be erase-protected or not
Single image, checkmarked images, or all images in the
card can be erased (except protected images) at one time
• Direct Printing
Compatible printers:
Printable images:
PictBridge-compatible printers
JPEG image compliant to Design rule for Camera File
System (DPOF printing possible)
Provided
Easy Print feature:
• Digital Print Order Format
DPOF:
Version 1.1 compatible
• Direct Image Transfer
Compatible images:
JPEG and RAW images
* Only JPEG images can be transferred as wallpaper on
the personal computer screen
• Customization
Custom Functions:
Total 12
My Menu registration: Provided
• Interface
USB terminal:
For personal computer communication and direct printing
(Hi-Speed USB)
Video OUT terminal:
NTSC/PAL selectable
Remote control terminal: For Remote Switch RS-60E3
• Power Source
Battery:
Battery Pack LP-E5 (Quantity 1)
* AC power can be supplied via AC Adapter Kit ACK-E5
* With Battery Grip BG-E5, size-AA batteries can be used
Download from Www.Somanuals.com. All Manuals Search And Download.
182
Specifications
Battery life:
[Number of shots • approx.]
Shooting Conditions
Temperature
No Flash
50% Flash Use
At 23°C / 73°F
At 0°C / 32°F
600
500
500
400
* With fully-charged Battery Pack LP-E5
* The figures above are based on CIPA (Camera &
Imaging Products Association) testing standards
Auto
Battery check:
Power saving:
Provided. Power turns off after 30 sec., 1, 2, 4, 8, or 15 min.
Date/time backup battery: Built-in secondary battery
Startup time:
Approx. 0.1 sec. (Based on CIPA testing standards)
• Dimensions and Weight
Dimensions (W x H x D): 126.1 x 97.5 x 61.9 mm / 5.0 x 3.8 x 2.4 in.
Weight:
Approx. 450 g / 15.9 oz. (body only)
• Operation Environment
Working temperature
range:
0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
• Battery Pack LP-E5
Type:
Rated voltage:
Battery capacity:
Rechargeable lithium ion battery
7.4 V DC
1080 mAh
Dimensions (W x H x D): 36 x 14.7 x 53.1 mm / 1.4 x 0.6 x 2.1 in.
Weight: Approx. 50 g / 1.8 oz. (excluding protective cover)
• Battery Charger LC-E5
Compatible battery:
Recharging time:
Rated input:
Battery Pack LP-E5
Approx. 2 hours
100 - 240 V AC (50/60 Hz)
8.4 V DC / 700 mA
Rated output:
Working temperature
range:
Working humidity:
0°C - 40°C / 32°F - 104°F
85% or less
Dimensions (W x H x D): 67 x 26 x 87.5 mm / 2.6 x 1.0 x 3.4 in.
Weight: Approx. 80 g / 2.8 oz.
Download from Www.Somanuals.com. All Manuals Search And Download.
183
Specifications
• Battery Charger LC-E5E
Compatible battery:
Power cord length:
Recharging time:
Rated input:
Battery Pack LP-E5
Approx. 2 m / 6.6 ft.
Approx. 2 hours
100 - 240 V AC (50/60 Hz)
8.4 V DC / 700 mA
Rated output:
Working temperature
range:
Working humidity:
0°C - 40°C / 32°F - 104°F
85% or less
Dimensions (W x H x D): 67 x 26 x 87.5 mm / 2.6 x 1.0 x 3.4 in.
Weight: Approx. 75 g / 2.6 oz.
• EF-S 18-55mm f/3.5-5.6 IS
Angle of view:
Diagonal extent: 74°20’ - 27°50’
Horizontal extent: 64°30’ - 23°20’
Vertical extent: 45°30’ - 15°40’
11 elements in 9 groups
f/22 - 36
Lens construction:
Minimum aperture:
Closest focusing
distance:
0.25 m / 0.82 ft. (From image sensor plane)
Max. magnification:
Field of view:
0.34x (at 55 mm)
207 x 134 - 67 x 45 mm / 8.1 x 5.3 - 2.6 x 1.8 in.
(at 0.25 m)
Lens shift type
58 mm
Image Stabilizer:
Filter size:
Max. diameter x length: Approx. 68.5 x 70 mm / 2.7 x 2.8 in.
Weight:
Hood:
Case:
Approx. 200 g / 7.1 oz.
EW-60C
LP814
Download from Www.Somanuals.com. All Manuals Search And Download.
184
Specifications
• EF-S 18-55mm f/3.5-5.6 II
Angle of view:
Diagonal extent: 74°20’ - 27°50’
Horizontal extent: 64°30’ - 23°20’
Vertical extent: 45°30’ - 15°40’
11 elements in 9 groups
f/22 - 36
Lens construction:
Minimum aperture:
Closest focusing
distance:
Max. magnification:
Field of view:
0.28 m / 0.92 ft. (From image sensor plane)
0.28x (at 55 mm)
248 x 161 - 81 x 54 mm / 9.8 x 6.3 - 3.2 x 2.1 in.
(at 0.28 m)
58 mm
Filter size:
Max. diameter x length: Approx. 68.5 x 66 mm / 2.7 x 2.6 in.
Weight:
Hood:
Case:
Approx. 190 g / 6.7 oz.
EW-60C
LP814
All specifications above are based on Canon’s testing standards.
The camera’s specifications and exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in
the United States and other countries.
Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in
the United States and other countries.
The SDHC logo is a trademark.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
* This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances compatibility
between digital cameras and printers. By connecting to an Exif Print-compliant
printer, the shooting information is incorporated to optimize the print output.
Download from Www.Somanuals.com. All Manuals Search And Download.
185
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
187
European Union (and EEA) only.
This symbol indicates that this product is not to be disposed of with
your household waste, according to the WEEE Directive (2002/96/
EC) and your national law. This product should be handed over to
a designated collection point, e.g., on an authorized one-for-one
basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment (EEE). Improper handling of this type of waste could
have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation in the
correct disposal of this product will contribute to the effective usage
of natural resources. For more information about where you can
drop off your waste equipment for recycling, please contact your
local city office, waste authority, approved WEEE scheme or your
household waste disposal service. For more information regarding
return and recycling of WEEE products, please visit
www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
Download from Www.Somanuals.com. All Manuals Search And Download.
188
Index
A
C
Access lamp....................................32
Camera
Clear camera settings.............. 114
A-DEP
Holding the camera.................... 36
(Automatic depth-of-field AE)..........76
Camera shake................... 35 - 37, 94
Image Stabilizer ......................... 35
Adobe RGB.....................................87
AE lock............................................88
AEB (Auto Exposure Bracketing)....80
AF J Focusing
Card...................................... 2, 13, 31
Card reminder.......................... 108
Format........................................ 40
AI Focus AF....................................60
Angle of view...................................34
Aperture-priority AE ........................72
Auto Lighting Optimizer.................156
Auto playback ...............................127
Auto power off.........................27, 109
Auto rotate of vertical image .........112
Autofocus J Focusing
Center-weighted average
metering ......................................... 77
Clock J Date/Time
Close-up......................................... 49
Color space .................................... 87
sRGB / Adobe RGB
Color temperature .......................... 90
Color tone....................................... 83
Continuous shooting....................... 63
Contrast.......................................... 83
Creative shooting ............... 20, 55, 69
Custom Functions ........................ 152
Av (Aperture-priority AE).................72
B
Basic shooting.................................43
Battery J Power
D
Battery check..................................28
Beeper ..........................................108
Black-and-white image....................68
Bracketing.................................80, 93
Date J Date/Time
Date/Time....................................... 29
Depth-of-field preview .................... 74
Dioptric adjustment......................... 36
Direct printing J Printing
Bulb.................................................75
Noise reduction.........................155
Drive mode..................................... 63
Single / Continuous shooting
Self-timer.................................... 53
Download from Www.Somanuals.com. All Manuals Search And Download.
189
Index
Dust ........................................34, 118
Dust Delete Data ..........................119
Flash exposure
compensation......................... 79, 116
1/2-stop increments ................. 154
E
Focus lock...................................... 46
Focus mode switch .................. 33, 62
Erase (image) ...............................130
Error..............................................175
Evaluative metering ........................77
Focusing
AF mode .................................... 60
AF point selection ...................... 61
AF-assist beam.......................... 45
Beeper ..................................... 108
Difficult-to-focus subjects......... 162
Live View shooting............. 98, 102
Manual focusing......................... 62
Out of focus ....................... 45, 162
Recompose................................ 46
Exposure compensation .................78
1/2-stop increments..................154
Eyepiece cover .......................22, 165
F
Faithful............................................68
FE lock............................................89
File
Folder........................................... 110
Format (card initialization).............. 40
Full Auto......................................... 44
Function availability table............. 170
Capacity .....................................64
Number.....................................110
Size ............................................64
File number...................................110
Continuous / Auto reset /
Manual reset
H
Highlight alert ............................... 131
Highlight detail loss ...................... 131
Filter effect......................................84
Flash...............................................58
2nd-curtain sync.......................116
Effective range ...........................58
External Speedlite ............117, 166
FE lock .......................................89
Flash exposure
Histogram..................................... 132
Brightness / RGB
Household power ......................... 163
compensation.....................79, 116
Flash off......................................52
Menu setting.............................116
Red-eye reduction......................59
Shutter speed fixed at
1/200 sec..................................154
Download from Www.Somanuals.com. All Manuals Search And Download.
190
Index
I
L
Image
Landscape................................ 48, 67
Language ....................................... 30
Auto playback...........................127
Erase ........................................130
Highlight....................................131
Histogram .................................132
Index.........................................124
Jump.........................................125
Magnified..................................126
Playback.............................54, 123
Protect ......................................129
Review time..............................108
Rotate.......................................126
Shooting information.................131
Transfer to personal computer....147
Viewing on TV ..........................128
LCD monitor ................................... 13
Brightness adjustment ............. 109
Display switching ....................... 42
Image playback.......................... 54
Menu operation.......................... 38
Off/On ................................ 42, 115
Screen color............................. 115
Lens.......................................... 16, 33
Live View shooting ......................... 95
Autofocus......................... 102, 157
Possible shots.......................... 100
Long exposures J Bulb
Image quality
Low level format ............................. 41
Auto correction .........................156
Image-recording quality..............64
Noise reduction.........................155
Picture Style....................67, 82, 85
M
M (Manual exposure) ..................... 75
Magnified view........................ 98, 126
Malfunction................................... 172
Manual exposure............................ 75
Manual focusing ............................. 62
Maximum burst......................... 64, 65
Memory card J Card
Image sensor
Cleaning .............................27, 118
Focal plane mark..................16, 49
Image Stabilizer (lens) ....................35
Image-recording quality selection ...64
Index display.................................124
ISO speed.......................................57
Item check list ...................................3
Menu
Menu settings........................... 168
My Menu .................................. 160
Operation ................................... 38
J
Metering mode ............................... 77
Evaluative / Partial /
Jump display.................................125
Center-weighted average
MF (Manual focusing)..................... 62
Download from Www.Somanuals.com. All Manuals Search And Download.
191
Index
Mirror lockup...........................94, 157
Mode Dial J Shooting mode
PictBridge..................................... 133
Picture Style
Customize.................................. 82
Selection.................................... 67
User defined .............................. 85
Monitor J LCD monitor
Monochrome image........................68
My Menu.......................................160
Pixel count selection ...................... 64
Playback J Image
N
Neutral ............................................69
Night Portrait...................................51
Portrait................................ 47, 51, 67
Possible shots........................ 28, 100
Noise reduction.............................155
For Long exposures /
Power
Auto power off.................... 27, 109
Battery ................................. 24, 26
Battery check............................. 28
Household power..................... 163
Possible shots.................... 28, 100
Power switch.............................. 27
High ISO speed
Nomenclature
Camera.......................................16
Lens............................................16
Mode Dial ...................................20
Shooting settings........................18
Viewfinder...................................19
Printing......................................... 133
Page layout.............................. 137
Paper ....................................... 137
Print Order (DPOF).................. 143
Printing effects ................. 138, 140
Trimming.................................. 141
Number J File number
O
One-Shot AF...................................60
Original decision
Problem........................................ 172
Program AE.................................... 56
Program shift.................................. 56
Protect (image erase-protection).. 129
(image verification) data ...............159
Overseas (charger).........................25
P
P (Program AE) ..............................56
Paper settings (printing)................136
Partial metering...............................77
R
RAW......................................... 64, 66
RAW+73................................. 64, 66
Recharge........................................ 24
Red-eye reduction.......................... 59
Remote control shooting .............. 164
Personal computer
Image transfer ..........................147
Wallpaper .................................149
Download from Www.Somanuals.com. All Manuals Search And Download.
192
Index
Revert to default settings ..............114
Rotate (image) ......................112, 126
T
Toning effect (Monochrome)........... 84
Sepia / Blue / Purple / Green
S
Transfer order (image) ................. 149
Trimming (printing) ....................... 141
Tv (Shutter-priority AE)................... 70
Safety warnings ............................186
Saturation........................................83
SD card J Card
V
Self-timer.........................................53
Sensor J Image sensor
Viewfinder....................................... 19
Dioptric adjustment .................... 36
Eyepiece cover ........................ 165
Sepia (Monochrome) ......................84
Servo AF.........................................60
Sharpness.......................................83
Shooting information display.........131
Viewing on TV .............................. 128
Video system (NTSC/PAL)....... 128
W
Shooting mode................................20
A-DEP.........................................76
Aperture-priority AE....................72
Close-up .....................................49
Flash off......................................52
Full Auto .....................................44
Landscape..................................48
Manual exposure........................75
Night Portrait...............................51
Portrait........................................47
Program AE................................56
Shutter-priority AE ......................70
Sports .........................................50
WB J White balance
White balance................................. 90
Bracketing.................................. 93
Correction .................................. 92
Custom....................................... 90
Z
Zoom .............................................. 34
Shutter button .................................37
Shutter-priority AE...........................70
Simultaneous recording
J RAW+73
Sports..............................................50
Strap ...............................................22
System map..................................176
Download from Www.Somanuals.com. All Manuals Search And Download.
193
Download from Www.Somanuals.com. All Manuals Search And Download.
194
Download from Www.Somanuals.com. All Manuals Search And Download.
195
CANON INC.
30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Europe, Africa & Middle East
CANON EUROPA N.V.
PO Box 2262, 1180 EG Amstelveen, The Netherlands
CANON UK LTD
CANON NEDERLAND N.V.
For technical support, please contact the Canon Help Desk:
Canon UK, RCC Customer Service
Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Helpdesk: 0900 – 202 2915 (0,13 €/min)
www.canon.nl
Unit 130, Centennial Park, Elstree, Herts, WD6 3SE, UK
Helpdesk: 0844 369 0100 (5pence/min from a BT landline, other costs may vary)
Fax: 020 8731 4164
CANON DANMARK A/S
Knud Højgaards Vej 1, DK-2860 Søborg, Denmark
Helpdesk: 70 20 55 15 (0,25DKK + 0,25 DKK/min)
Fax: 70 155 025
www.canon.co.uk
CANON FRANCE SAS
17, quai du Président Paul Doumer
92414 Courbevoie cedex, France
Hot line 0825 002 923 (0,15 €/min.)
www.canon.fr
www.canon.dk
CANON NORGE as
Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway
Helpdesk: 23 50 01 43 (0,89 NOK + 0,49 NOK/min)
www.canon.no
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
Helpdesk: 0180 500 6022 (0,14 €/min.)
www.canon.de
CANON OY
Kuluttajatuotteet, Huopalahdentie 24, PL1, 00351 Helsinki, Finland
Helpdesk: 020 366 466 (0,02 €/min + pvm tai mpm)
www.canon.fi
CANON ITALIA S.P.A.
Via Milano 8, I-20097 San Donato Milanese (MI), Italy
Servizio clienti: 848 800519 (0,0787 €+ 0,0143 €/min)
Fax: 02-8248.4600
CANON SVENSKA AB
Gustav III:s Boulevard 26, S-169 88 Solna, Sweden
Helpdesk: +46 (0)8 519 923 69 (0,23 SEK + 0,45 SEK/min)
Fax: +46 (0)8 97 20 01
www.canon.it
www.canon.se
CANON ESPAÑA S.A.
Avenida de Europa nº 6. 28108 Alcobendas (Madrid)
Helpdesk: 901.900.012 (€0,039/min)
Fax: (+34) 91 411 77 80
CANON (SCHWEIZ) AG
Industriestrasse 12, 8305 Dietlikon, Switzerland
Helpdesk: 0848 833 838 (0,08 CHF/min)
www.canon.ch
www.canon.es
CANON BELGIUM N.V. / S.A.
Berkenlaan 3, B – 1831 Diegem, Belgium
Helpdesk : (02) 620.01.97 (0,053 € + 0,053 €/min)
Fax: (02) 721.32.74
CANON AUSTRIA GmbH
Oberlaaer Strasse 233, A – 1110 Wien, Austria
Helpdesk: 0810 081009 (0,07 €/min)
www.canon.at
www.canon.be
CANON PORTUGAL, S.A.
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
Helpdesk : 27 302 054 (0,12 €/min)
Fax: (352) 48 47 96232
Rua Alfredo Silva, 14 - Alfragide, 2610-016 Amadora, Portugal
Helpdesk: +351 21 42 45 190 (€0,0847 + €0,031/min)
www.canon.pt
www.canon.lu
WEB SELF-SERVICE: www.canon-europe.com
This Instruction Manual booklet is current as of July 2008. For information on the
camera’s compatibility with any accessories and lenses introduced after this date,
contact any Canon Service Center.
CEL-SJ1RA210
© CANON INC. 2008
PRINTED IN THE EU
Download from Www.Somanuals.com. All Manuals Search And Download.
|