Camera User Guide
• Make sure you read this guide before using the camera.
• Store this guide safely so that you can use it in the future.
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon
Warranty System Booklet supplied with your camera.
For Canon Customer Support contacts, please see the Warranty System
Booklet.
LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Memory Cards
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
What Do You Want to Do?
Shoot
Take good people shots
I F V w P
Portraits
At night
Kids and pets
At the beach
Against snow
Take good landscapes
U O
Sunsets
Foliage
Shoot various other scenes
H t y Z
Indoors
Fireworks
Aquarium
Low light
● Take close-up pictures of subjects using the zoom
(digital macro shooting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
●
● Shoot without the effects of camera shake even in low light
Download from Www.Somanuals.com. All Manuals Search And Download.
4
What Do You Want to Do?
View
Shoot/View Movies
Print
2
Save
Other
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Returning the Camera
to Default Settings..................... 51
Low Level
Memory Card Formatting .......... 52
Power Saving Function
(Auto Power Down) ................... 53
Inserting the Battery and
3 Shooting in Special
Used Functions................... 55
Zooming in More Closely on Subjects
(Digital Zoom)............................ 60
(Creative Light Effect)................ 65
.............................................. 67
(Exposure Compensation)......... 69
Information Displayed
(Infinity)...................................... 71
on the Screen.............................44
(Digital Macro)........................... 71
Changing the Compression Ratio
(Image Quality).......................... 72
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
Changing the Tone of an Image
(My Colors) ............................... 77
Self-Timer ................................. 78
Functions........................... 105
in Filtered Playback .................108
Changing the Composition
with the Focus Lock .................. 80
Holding the Camera and Shooting
Vertically (Vertical Shutter) ....... 80
with Touch Actions ..................113
on a High-Definition TV ...........116
Choosing the Subject to Focus On
(Touch AF)................................ 86
Organizing Images by Category
Shooting (i-Contrast)................. 90
with the My Colors Function ....129
(i-Contrast)...............................130
(DPOF) ....................................132
(DPOF) ....................................134
6 Using Various Functions for
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Table of Contents
on the Screen.......................... 154
or Sound ..................................147
Shooting Mode ........................ 156
Conventions Used in this Guide
• Icons are used in the text to represent the camera buttons and switches.
•
Language that displays on the screen appears inside [ ] (square brackets).
• The directional buttons, control dial, and FUNC./SET button are
represented by the following icons.
(Up button)
(FUNC./SET button)
(Right button)
(Left button)
(Down button)
(Control dial)
•
•
•
•
: Troubleshooting tips.
: Hints for getting more out of your camera.
: Things you should be careful about.
: Supplemental information.
• (p. xx): Reference pages. “xx” stands for page number.
• This guide assumes all functions are at their default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Safety Precautions
Before using the camera, please ensure that you read the safety precautions described
below. Always ensure that the camera is operated correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you use.
•
•
•
Denotes the possibility of serious injury or death.
Denotes the possibility of injury.
Warning
Caution
Caution
Denotes the possibility of damage to the equipment.
Warning
Camera
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card: Dangerous if accidentally swallowed. If this occurs, contact a doctor
immediately.
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
• Use only recommended power sources.
Using other power sources could result in fire or electrical shock.
Battery, Battery Charger
• Use only recommended batteries.
• Do not place the battery near or in direct flame.
•
Do not let the battery come into contact with water (e.g. sea water) or other liquids.
• Do not attempt to disassemble, alter or apply heat to the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Safety Precautions
• Avoid dropping or subjecting the battery to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical assistance.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or the closest Canon Customer Support Help Desk.
• Use only the specified battery charger to charge the battery.
• Do not cut, damage, alter or place heavy items on the power cord.
• Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
This could result in fire or electrical shock.
Other Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones to
the loud sounds of a CD-ROM played on a music CD player.
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could damage the camera or lead to injury.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
This could result in electrical shock or fire.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries. High temperatures may also cause
deformation of the casing.
• Do not allow dirt or metal objects (such as pins or keys) to contact the charger
terminals or plug.
This could result in fire, electrical shock or other damage.
• The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Safety Precautions
• Do not use the flash with dirt, dust or other items stuck to the surface, or if it is
covered by your fingers or clothing.
This could result in burns or damage to the flash.
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
This may cause the camera to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to
the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign
matter from the flash to prevent heat build-up and damage to the unit.
• Unplug the battery charger from the power outlet after recharging is complete,
or when you are not using it.
• Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and
distort, resulting in fire.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire
or injuries.
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
• Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
1
Getting Started
This chapter explains preparations before shooting, how to shoot in
Amode, and then how to view, erase and print the images you
take. The latter part of this chapter explains how to shoot and view
movies and transfer images to a computer.
Attaching the Strap/Holding the Camera
• Attach the included strap and place it around your wrist to avoid dropping
the camera during use.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash or touch the
screen.
Strap
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Using the Touch Panel
This camera has a touch panel screen that allows you to perform operations
with the touch of your finger.
Basic Touch Operations
Touch
Briefly touch the screen with
your finger.
Used for choosing icons or magnifying
images.
Double Tap
Quickly tap the screen twice.
Used in Playback mode to switch to
Index Display.
Drag
Touch and drag your finger
across the screen.
Used for playback operations such as
switching to the next image, or moving
the displayed location of magnified
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Using the Touch Panel
Available Touch Operations
Shooting Mode
Choose a subject to focus on (Touch AF)
Choose an appropriate Shooting mode for
the scene
Change the flash mode
Shoot vertically*
*Appears when you hold the camera vertically
Correct the brightness (exposure
compensation)
Playback Mode
Switching the Display
Magnified Display/
Index Display
Registering Commonly
Used Functions
(Touch Actions)
Do not install commercially available screen protectors. Since the camera
uses a pressure sensitive touch panel, the camera may not recognize
touch operations if you install a screen protector.
What if I cannot perform operations well?
When touching with your finger does not work
well, you can use the toggle attached to the strap
to perform operations. Only use the attached
toggle to perform operations. Do not use other
objects, such as pens or pencils.
You can calibrate the touch panel if you are
having difficulty choosing items or buttons
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Charging the Battery
Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
● Align the S marks on the battery and
charger, then insert the battery by sliding it
in
and down
.
Charge the battery.
● For CB-2LY: Flip out the plug
the charger into a power outlet
and plug
.
● For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
X The charge lamp lights red and charging
starts.
CB-2LY
CB-2LYE
● The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up
.
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Charging the Battery
Approximate Number of Shots That Can Be Taken
Number of shots
240
6
Playback Time (Hours)
• The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Display
Summary
Good.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted.
“Change the battery pack.”
Depleted. Recharge the battery.
Using the battery and charger effectively
• Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
Attach the cover to a charged battery
so that the S mark is visible.
• How to store the battery for long periods.
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
• The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
• The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
• If the battery is quickly depleted even after charging, it has reached the
end of its life span.
Purchase a new battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Inserting the Battery and Memory Card
Insert the included battery and a memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide the cover
, and open it
.
Insert the battery.
● Insert the battery as shown until it locks
into place with a click.
● Be sure to insert the battery in the correct
direction or it will not properly lock into
place.
Terminals
Insert the memory card.
● Insert the memory card as shown until it
locks into place with a click.
● Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the
camera.
Terminals
Close the cover.
● Close the cover
, and slide it
until it
locks into place with a click.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Inserting the Battery and Memory Card
Removing the Battery and Memory Card
Remove the battery.
● Open the cover and press the battery lock
in the direction of the arrow.
X The battery will pop up.
Remove the memory card.
● Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
Approximate Number of Shots per Memory Card
Memory Card
2 GB
626
8 GB
2505
Number of shots
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Number of shots that can be taken
Compatible Memory Cards
• SD memory cards
• SDHC memory cards
• MultiMediaCards
• MMCplus memory cards
• HC MMCplus memory cards
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Setting the Date and Time
What is the write-protect tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card locked!] will appear on the screen and you will not be able to take
or erase images.
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the ON/OFF button.
X The Date/Time screen will appear.
Set the date and time.
● Press the qrbuttons to choose an
option.
● Press the opbuttons or turn the Âdial
to set a value.
● If you choose
and press the op
buttons or turn the Âdial and choose
, you will set the time to daylight saving
(1 hour ahead).
Make the setting.
● Press the mbutton.
X Once the date and time have been set,
the Date/Time screen will close.
● Press the ON/OFF button to turn off the
camera.
Reappearing Date/Time screen
If the date/time battery is depleted, or you have not set the date and time, the
Date/Time screen will appear each time you turn on the camera. Set the correct
date and time.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Setting the Display Language
Date/Time battery
• The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
• By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 40) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
Setting the Display Language
You can change the display language in the LCD monitor menus and
messages.
Enter Playback mode.
● Press the 1button.
Display the settings screen.
● Press and hold the mbutton
, then
immediately press the nbutton
.
Set the display language.
● Press the opqrbuttons or turn the Â
dial to choose a language, then press the
mbutton.
X Once the display language has been set,
the settings screen will close.
What if the clock appears when the mbutton is pressed?
The clock will appear if too much time passes between pressing the mbutton
and the nbutton in Step 2. If the clock appears, press the mbutton to
remove the clock and repeat Step 2.
You can also change the display language by pressing the nbutton,
choosing the 3tab, and choosing the [Language] menu item.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Formatting Memory Cards
Before you use a new memory card or one that has been used in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Display the menu.
● Press the nbutton.
Choose [Format].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [Format], then press the m
button.
Format the memory card.
● Press the qrbuttons or turn the Âdial
to choose [OK], then press the mbutton.
X The memory card will be formatted.
X When formatting has finished, the menu
screen will reappear.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
X The camera automatically focuses and
selects the necessary settings for
shooting, such as the brightness.
X When the camera focuses, it will beep
twice and the indicator will light green.
Press fully (to the second stop).
X The camera plays the shutter sound and
takes the shot.
● Since the shot is being taken while the
shutter sound plays, be careful not to
move the camera.
Does the length of the shutter sound change?
• Since the time required to shoot differs according to the scene you want to take,
the length of the shutter sound may change.
• If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you just press the shutter button fully without pausing halfway, the
image may not be in focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Taking Pictures
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Turn on the camera.
● Press the ON/OFF button.
X The start-up sound will play, and the start-
up screen will appear.
Choose Amode.
● Set the mode switch to A.
● When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
X The camera focuses on the subject it
judges to be the main subject, and the
icon for the determined scene appears in
the upper right of the screen.
X When faces are detected, a white frame
appears on the face of the main subject,
while gray frames appear on other
detected faces.
X A white frame will follow a detected face
that is moving and the gray frames will
disappear.
Compose the shot.
● Moving the zoom lever toward iwill
zoom in on your subject, making it appear
larger. Moving the lever toward jwill
zoom out from your subject, making it
appear smaller.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Taking Pictures
Choose a subject to focus on.
● Touch the screen to choose the person or
location to focus on (Touch AF).
X The camera will beep and
will appear
on the screen.
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
X Green AF frames appear where the
subject is in focus.
X When a moving face or moving subject
chosen with Touch AF are detected, and
you keep the shutter button pressed
halfway, a blue AF frame appears and the
focus and exposure are continuously
adjusted (Servo AF).
AF Frame
Shoot.
● Press the shutter button fully.
X The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
X The indicator will blink green while the
image is recorded to the memory card.
X The image will appear on the screen for
about two seconds.
What if...
• a
flashing appears?
Attach the camera to a tripod so that the camera does not move and blur the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Taking Pictures
• the camera does not play any sounds?
Pressing the nbutton while turning on the camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button, choose the 3tab, and then choose [Mute]. Use the qrbuttons to
choose [Off].
• the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. Shoot within the effective flash
range of approximately 50 cm – 3.5 m (1.6 – 11 ft.) at maximum wide angle, and
approximately 90 cm – 1.5 m (3.0 – 4.9 ft.) at maximum telephoto.
• the camera beeps once when the shutter button is pressed halfway?
Your subject is too close. When the camera is at maximum wide angle, move
about 5 cm (2.0 in.) or more away from your subject and shoot. Move about
90 cm (3.0 ft.) or more away when the camera is at maximum telephoto.
• the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting in
dark areas.
• the hicon blinks when you try to take an image?
The flash is charging. You can shoot when recharging ends.
Scene Icons
The camera displays an icon for the scene it has determined and then automatically
focuses and selects the optimum settings for subject brightness and color.
Including Blue Skies
Background
Bright
Backlit
Dark
When Using
Tripod
Sunsets
Subject
People
Backlit
–
–
*
When Moving
–
–
Subjects Other Than
People/Landscapes
*
Close Subjects
–
–
Icon Background
Color
Gray
Light Blue
Orange
Dark Blue
* Appears when the camera is attached to a tripod.
Under certain conditions, the icon that appears may not match the actual
scene. Especially when there is an orange or blue colored background (a
wall for example),
or the “Blue Skies” icons may appear and it may
not be possible to shoot with the appropriate color. If this happens, try
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Viewing Images
You can view your images on the screen.
Enter Playback mode.
● Press the 1button.
X The last image you took will appear.
Choose an image.
● Dragging left to right displays images in
the reverse order they were taken.
● Dragging right to left displays images in
the order they were taken.
● Pressing the qbutton displays images in
the reverse order they were taken, while
pressing the rbutton displays images in
the order they were taken.
● The images change more quickly if you
keep the qrbuttons pressed.
● Turning the Âdial counter-clockwise
displays images in reverse order, while
turning it clockwise displays images in the
order they were taken.
● Pressing the shutter button halfway in
Playback mode switches the camera to
Shooting mode.
● The lens will retract after approximately 1
minute elapses.
Switching images quickly
If you hold the qbutton pressed and tilt the
camera as shown in the illustration, the images
advance quickly. However, the images appear
coarse.
When you hold the rbutton pressed tilt the
camera to the opposite direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Erasing Images
Active Display
If you tilt the camera gently from your wrist as shown in the illustration below,
you can switch the images you are viewing. You can also start and stop
• Depending on how you tilt the camera, images may not switch.
• Be careful not to accidentally hit people with the camera.
• Be sure to hold the camera with the strap around your wrist to avoid
dropping it.
Hold the camera without
releasing the shutter button.
Switch to the next image
Switch to the previous image
Erasing Images
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
● Press the 1button.
X The last image you took will appear.
Choose an image to erase.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Printing Images
Erase the image.
● Drag as shown.
X [Erase?] appears.
● Touch [Erase].
X The displayed image will be erased.
● To exit instead of erasing, touch [Cancel].
● You can also erase images in the
following ways.
Press the mbutton, then use the op
buttons or turn the Âdial to choose a.
Press the mbutton and use the qr
buttons or turn the Âdial to choose
[Erase], then press the mbutton again.
Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
• Camera and PictBridge compliant printer (sold separately)
Turn off the camera and printer.
Connect the camera to the printer.
● Open the cover, and insert the small end
of the plug firmly into the camera terminal
in the direction shown.
● Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
Turn on the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Printing Images
Turn on the camera.
● Press the 1button to turn on the camera.
Choose an image to print.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Print images.
● Press the mbutton, then press the op
buttons to choose 2and press the m
button.
X The Print Settings screen will appear.
● Press the opbuttons to choose [Print]
and press the mbutton.
X Printing will start.
● If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
● After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
• Refer to the Personal Printing Guide for details on printing.
printing is not available with the CP710/CP510/CP400/CP330/CP300/
CP220/CP200 printers.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Shooting Movies
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button. If you continue shooting for a long
time, the camera may become warm. This is not a malfunction.
Set the mode switch to E.
Shooting Time
Choose X(Standard) mode.
● Touch
, then touch
. Touch the
screen again to make the setting.
● You can also choose Xmode in the
following ways.
Press the mbutton, then use the op
buttons or turn the Âdial to choose E
and press the mbutton again. Use the
opbuttons or turn the Âdial to choose
Eand press the mbutton.
Compose the shot.
● Moving the zoom lever toward iwill
zoom in on your subject, making it appear
larger. Moving the lever toward jwill
zoom out from your subject, making it
appear smaller.
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and the indicator will light green.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Shooting Movies
Shoot.
● Press the shutter button fully.
X The camera will start shooting the movie,
and [ Rec] and the elapsed time will
appear on the screen.
● Once shooting begins, take your finger off
the shutter button.
Elapsed Time
● If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
● You can zoom in and out with the zoom
lever while shooting.
● Do not touch the microphone while
shooting.
● Do not press any buttons other than the
shutter button. Otherwise, the sound the
buttons make will be recorded in the
movie.
Microphone
Stop shooting.
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The indicator will blink green, and the
movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Estimated Shooting Times
Memory Card
Shooting Time
2 GB
10 min. 53 sec.
8 GB
43 min. 32 sec.
• Shooting times are based on default settings.
• Maximum clip length is approx. 10 minutes.
• Recording may stop even if the maximum clip length has not been reached on
some memory cards. SD Speed Class 4 or higher memory cards are
recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Viewing Movies
You can view your movies on the screen.
Enter Playback mode.
● Press the 1button.
X The last image you shot will appear.
X
and
appear on movies.
Choose a movie.
● Drag horizontally across the screen to
choose an image to play back.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Play the movie.
● Touch the screen.
X The movie will play.
● Touch the screen again to stop the movie.
● Press the opbuttons to adjust the
volume.
X After the movie finishes,
and
appear.
● You can also press the obutton to
display the operations panel, then press
the qrbuttons or turn the Âdial to
choose
button.
(Play) and press the m
Start quick playback (Active Display)
If you shake the camera gently as shown in the
illustration, you can begin quick movie playback.
If you shake the camera gently again, the movie
will stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Transferring Images to a Computer
When watching a movie on a computer, frames may drop, it may not play
smoothly, and the audio may stop suddenly depending on the computer’s
capabilities. If you use the supplied software to copy the movie back onto
the memory card, you can play back the movie smoothly with the camera.
For enhanced playback you can also connect the camera to a TV.
Transferring Images to a Computer
You can use the included software to transfer your camera images to a
computer. If you are already using ZoomBrowser EX/ImageBrowser, install
the software from the included CD-ROM, overwriting your current
installation.
Items to Prepare
• Camera and computer
System Requirements
Windows
OS
Windows Vista (including Service Pack 1, Service Pack 2)
Windows XP Service Pack 2, Service Pack 3
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU
Viewing images Pentium 1.3 GHz or higher
Viewing movies Core2 Duo 1.66 GHz or higher
RAM
Windows Vista: 1 GB or more
Viewing images
Windows XP: 512 MB or more
Viewing movies 1 GB or more
USB
Interface
Free Hard Disk
Space
ZoomBrowser EX: 200 MB or more*
PhotoStitch: 40 MB or more
Display
1,024 x 768 pixels or higher
* For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be
installed. Installation may take some time depending on your computer's capabilities.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Transferring Images to a Computer
Macintosh
OS
Mac OS X (v10.4 – v10.5)
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU
Viewing images PowerPC G4/G5 or Intel Processor
Viewing movies Core Duo 1.66 GHz or higher
Viewing images 512 MB or more
Viewing movies 1 GB or more
RAM
Interface
USB
Free Hard Disk
Space
ImageBrowser: 300 MB or more
PhotoStitch: 50 MB or more
Display
1,024 x 768 pixels or higher
Preparations
Windows Vista and Mac OS X (v10.5) are used for these explanations.
Install the software.
Windows
Place the DIGITAL CAMERA Solution
Disk in the computer’s CD-ROM drive.
Begin installation.
● Click [Easy Installation] and follow the on-
screen instructions to proceed with the
installation.
● If the [User Account Control] window
appears, follow the on-screen instructions
to proceed.
When the install finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
● Remove the CD-ROM when your desktop
screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Transferring Images to a Computer
Macintosh
● Place the CD-ROM in the computer's CD-
ROM drive and double-click the icon.
● Click [Install], and follow the onscreen
instructions to proceed with the
installation.
Connect the camera to the
computer.
● Turn off the camera.
camera to a computer.
Turn on the camera.
● Press the 1button to turn on the camera.
Open CameraWindow.
Windows
● Choose [Downloads Images From Canon
Camera using Canon CameraWindow].
X CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and choose
[All Programs], followed by [Canon
Utilities], [CameraWindow],
[CameraWindow] and [CameraWindow].
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Transferring Images to a Computer
Macintosh
X CameraWindow will appear when you
establish a connection between the
camera and computer.
● If CameraWindow does not appear, click
the CameraWindow icon on the Dock (the
bar which appears at the bottom of the
desktop).
Transfer Images
● Click [Import Images from Camera], and
then click [Import Untransferred Images].
X All images not previously transferred will
transfer to the computer. Transferred
images will be sorted by date and saved in
separate folders in the Pictures folder.
● After the transfer finishes, click [x] to close
CameraWindow, then turn off the camera
and unplug the cable.
● For further operations, refer to the
Software Guide.
You can transfer images without installing the included software by simply
connecting your camera to a computer. There are, however, the following
limitations:
• After connecting to the camera, it may take a few minutes until you can
transfer images.
• The camera information may not display correctly.
• Movies may not transfer correctly.
• Images shot vertically may be transferred in the horizontal orientation.
• Protection settings for images may be lost when transferred to a
computer.
• There may be problems transferring images or image information
correctly depending on the version of the operating system in use, the
file size, or the software in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Accessories
Supplied with Camera
AV Cable
AVC-DC400
*1
Wrist Strap
WS-DC10
Interface Cable
*1
IFC-400PCU
*1
Battery Pack NB-6L
(with Terminal Cover)
DIGITAL CAMERA
Solution Disk
Battery Charger
CB-2LY/CB-2LYE
*1
AC Adapter Kit ACK-DC40
DC Coupler
DR-40
Power Cord
Compact Power Adapter
CA-DC10
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Accessories
HDMI Cable HTC-100
High-Definition TV
Video IN Terminal
Audio IN Terminal
TV/Video
Canon-Brand PictBridge Compliant Printers*2
Compact Photo Printers
(SELPHY series)
Inkjet Printers
Memory Card
Card Reader
Windows/Macintosh
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• AC Adapter Kit ACK-DC40
This kit lets you power the camera using household power. Recommended for
powering the camera for an extended period of time or when connecting to a
computer. Cannot be used to charge the battery inside the camera.
• Battery Charger CB-2LY/CB-2LYE
An adapter for charging Battery Pack NB-6L.
• Battery Pack NB-6L
Rechargeable lithium-ion battery.
Other Accessories
• HDMI Cable HTC-100
Use this cable to connect the camera to the HDMI™ terminal on a high-definition
TV set.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Components Guide
HDMI Terminal (p. 116)
Strap Mount (p. 13)
A/V OUT (Audio/Video Output)
Shutter Button (p. 23)
Lens
Zoom Lever
Tripod Socket
Shooting: i(Telephoto) /
DC Coupler Terminal Cover (p. 138)
Memory Card / Battery Cover (p. 18)
Mode Switch
Use the mode switch to change the Shooting mode.
Auto Mode
Shooting Mode
You can shoot with the best settings for the scene (p. 56)
or select settings yourself to take various types of pictures
Movie Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Components Guide
Speaker
Mode Switch
qButton
mFUNC./SET (Function/Set) Button
Microphone (p. 32)
ON/OFF Button (p. 20)
Indicator (p. 46)
pButton
Control Dial (p. 43)
oButton
Control Dial
Turning the control dial allows you to perform
operations such as choosing items or switching
images.
1Button
When the lens is extended, you can switch between Shooting and Playback
modes. When the lens is retracted, you can use this button to turn the
camera on and off in Playback mode.
Screen (LCD Monitor)
The screen is a touch panel. When shooting, you can touch the screen to
choose the subject you want to focus on, or touch icons to easily make
settings. During playback, you can also touch the screen to switch the
display or to start playing a movie.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Information Displayed on the Screen
Shooting (Information Display)
Battery Charge Indicator
Camera Orientation*
White Balance (p. 75)
My Colors (p. 77)
i-Contrast (p. 90)
Disp. Overlay (p. 145)
Spot AE Point Frame
Digital ZoomMagnification
Exposure Compensation
Metering Modes (p. 87)
Self-Timer
Time Zone (p. 141)
FE Lock (p. 88)
Drive Mode (p. 76)
Camera Shake Warning
Compression (Image
Quality) (p. 72)
AF Lock (p. 84)
Red-Eye Correction
Shutter Speed
Aperture Value
Image Stabilizer (p. 145)
Recording Pixels (p. 72)
Still Images: Recordable
shots (p. 19)
Movies: Elapsed Time
Shooting Mode
Flash Mode
Vertical Shutter (p. 80)
Date Taken/Recorded
ISO Speed (p. 74)
*
: Standard,
: Held vertically
When shooting, the camera detects if it is held vertically or horizontally, and
adjusts settings accordingly for the best shot. It also detects orientation during
playback, so you can hold the camera in either orientation and it will
automatically rotate images for correct viewing.
This function may not operate correctly when the camera is pointed straight up or down.
Switching the Display
You can change the display using the pbutton.
Information Display
No Information Display
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Information Displayed on the Screen
Playback (Detailed Information Display)
Print List (p. 132)
My Category (p. 122)
Shooting Mode
ISO Speed (p. 74)
Exposure Compensation
White Balance (p. 75)
Histogram (p. 46)
Image Editing
Compression (Image
(Movies) (p. 99)
Recording Pixels (p. 72)
Battery Charge Indicator
Metering Modes (p. 87)
Folder Number – File
Number (p. 138)
Displayed image
number / Total number of
images
Infinity (p. 71)
File Size (p. 73)
Still Images: Recording
Pixels (p. 72)
Movies: Movie Length
Protect (p. 117)
Favorites (p. 124)
Red-Eye Correction
Shutter Speed
Aperture Value, Image
Quality (Movies) (p. 99)
Shooting Date and Time
Switching the Display
You can change the display using the pbutton.
Simple Information
Display
No Information
Display
Detailed Information Focus Check Display
Display
You can also switch the display by pressing the pbutton while the image
displays shortly after shooting. However, Simple Information will not
display. You can set the display that appears first. Press the n
button to choose the 4tab. Then set [Review Info].
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Indicator
Display in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
flash on the screen.
Histogram during Playback
● The graph that appears in “Detailed
histogram. The histogram shows the
distribution and amount of brightness of
an image. When the graph approaches
the right side, the image is bright, but
when it approaches the left side, the
image is dark, and in this way you can
judge the exposure.
High
Low
Dark
Bright
Indicator
following conditions.
Colors
Status
Operation Status
Green
Orange
When the indicator blinks green, data is being recorded to/read from the
memory card or various information is being transmitted. Do not turn off
the power, open the memory card slot/battery cover, shake or jolt the
camera. These actions may corrupt the image data or cause the camera
or memory card to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
FUNC. Menu – Basic Operations
You can set commonly used functions using the FUNC. menu. The menu
the FUNC. menu in Playback mode.
Display the FUNC. menu.
● Press the mbutton.
Choose a menu item.
● Press the opbuttons, or turn the Â
dial to choose a menu item, then press the
mbutton.
● Depending on the menu, the screen may
switch. Choose a menu item and make
the setting.
Selectable Options
Menu Items
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option.
● To return to the menu, press the qbutton.
Make the setting.
● Press the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
MENU – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The available
Display the menu.
● Press the nbutton.
Choose a tab.
● Press the qrbuttons, or move the zoom
Choose a menu item.
● Press the opbuttons or turn the Âdial
to choose a menu item.
● Some items require you to press the m
button or rbutton to display a submenu in
which you change the setting.
Choose an option.
● Press the qrbuttons to choose an
option.
Make the setting.
● Press the nbutton.
X The normal screen will reappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
● Press the nbutton.
Choose [Mute].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [Mute], then use the qr
buttons to choose [On].
Adjusting the Volume
Display the menu.
● Press the nbutton.
Choose [Volume].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [Volume], then press the m
button.
Change the volume.
● Press the opbuttons or turn the Âdial
to choose an item, then use the qr
buttons to adjust the volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Changing the Screen Brightness
The screen brightness can be changed in two ways.
With the Menu
Display the menu.
● Press the nbutton.
Choose [LCD Brightness].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [LCD Brightness],
Change the brightness.
● Press the qrbuttons to change the
brightness.
● Press the nbutton again to complete
the setting.
With the pButton
● Press the pbutton for more than one
second.
X The screen increases to maximum
brightness regardless of the setting in the
3tab.
● Pressing the pbutton again for more
than one second will return the screen to
the original brightness.
• The next time you turn on the camera, the screen will be at the
brightness setting chosen in the 3tab.
• When you have set the brightness to its highest setting in the 3tab, you
cannot change the brightness with the pbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
● Press the nbutton.
Choose [Reset All].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [Reset All], then press the m
button.
Reset the settings.
● Press the qrbuttons or turn the Âdial
to choose [OK], then press the mbutton.
X The camera will reset to the default
settings.
Are there functions that cannot be reset?
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Low Level Memory Card Formatting
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped. As you cannot retrieve the erased
data, exercise adequate caution before low level formatting the memory
card.
Display the menu.
● Press the nbutton.
Choose [Format].
● Press the qrbuttons to choose the 3
tab.
● Press the opbuttons or turn the Âdial
to choose [Format], then press the m
button.
Perform the low level format.
● Press the opbuttons or turn the Âdial
to choose [Low Level Format], then use
the qrbuttons to display
.
● Press the opqrbuttons or turn the Â
dial to choose [OK], then press the m
button.
X Low level formatting starts.
About low level formatting
When the [Memory card error] message appears, or when the camera does not
work correctly, low level formatting the memory card may solve the problem.
Copy the images from the memory card to a computer or other device before low
level formatting.
since all recorded data are erased.
• You can stop a low level format of a memory card by choosing [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The monitor will turn off approximately 1 minute after the camera is last
operated. After about 2 more minutes, the lens will retract and the power will
turn off. When the monitor has turned off but the lens has not yet retracted,
can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last operated.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Clock Functions
You can check the current time.
● Press and hold the mbutton.
X A screen like that on the left appears
showing the current time.
● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the qrbuttons or
turn the Âdial to change the display
color.
● Press the mbutton to cancel the clock
display.
When the camera power is off, press and hold the mbutton, then press
the ON/OFF button to display the clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
3
Shooting in Special
Conditions and Commonly
Used Functions
This chapter explains how to shoot in different conditions, as well as
how to use common functions, such as the flash and self-timer.
• When you choose a Shooting mode that matches a particular set of
conditions, the camera will automatically select any necessary settings.
All you need do is press the shutter button to take an optimized picture.
• This chapter assumes the mode is set to Afor “Turning the Flash Off”
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Shooting in Various Conditions
The camera will select the necessary settings for the conditions in which
you wish to shoot when you choose the matching mode.
Set the mode switch to
4
Choose the desired shooting
mode.
● Touch
.
● If you touch the qrbuttons on the screen,
or quickly drag across it, a different set of
shooting modes will appear.
● Choose the desired shooting mode.
X A summary of the chosen shooting mode
will appear.
● Touch the screen again to make the
setting.
● If you touch
, the camera will return to
the shooting mode selection screen.
● You can also choose shooting modes
Shoot.
ITake portraits (Portrait)
● Produces a soft effect when
photographing people.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Shooting in Various Conditions
FTake snapshots at night
(Night Snapshot)
● Lets you take beautiful snapshots of
people against city nightscapes or night
backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
VTake shots of kids and pets
(Kids&Pets)
● Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
HTake indoor shots (Indoor)
● Lets you shoot indoors with natural colors.
UShoot sunsets (Sunset)
● Lets you take shots of sunsets in vivid
colors.
tTake shots of fireworks
(Fireworks)
● Lets you take shots of fireworks in vivid
colors.
wTake shots of people at the beach
(Beach)
● Lets you take bright shots of people on
sandy beaches where the reflected
sunlight is strong.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Shooting in Various Conditions
yTake shots of aquatic life in an
aquarium (Aquarium)
● Lets you take natural-colored shots of
aquatic life in indoor aquariums.
OTake shots of foliage (Foliage)
● Lets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
PTake shots of people in snow
(Snow)
● Lets you take bright, natural-colored shots
of people against snowy backgrounds.
ZShoot using high ISO speed
(ISO 3200)
● Lets you set the ISO speed to 3200, and
lets you shoot without camera shake or
subject blurring even in low light
conditions.
● Recording pixels are set to
(1600 x
In F, V, Hor ymode, images may appear coarse because the ISO
• In tmode, attach the camera to a tripod to prevent the camera from
moving and blurring the image. Additionally, you are recommended to
• In Zmode, images may appear coarse.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Turning the Flash Off
You can shoot with the flash turned off.
Touch
.
Choose !.
● Touch !to choose it.
● Touch !again to make the setting.
X Once set, !will be selected.
● After pressing the rbutton, you can also
press the qrbuttons or turn the Âdial
to choose !.
Shoot.
What if the indicator blinks orange and a flashing
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, the indicator will blink orange and a flashing
will appear on the
screen. Attach the camera to a tripod to prevent it from moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to a maximum of 20x and capture
images may appear coarse, however, depending on the recording pixel
Move the zoom lever toward i.
● Hold the lever until zooming stops.
X The zoom will stop when the largest
possible zoom factor without image
deterioration has been reached. The
zoom factor will appear when you release
the zoom lever.
Move it toward iagain.
X The digital zoom will zoom in even further
on the subject.
Zoom Factors at which Images Deteriorate
Optical Zoom*
(24 – 120 mm)
Digital Zoom*
(120 – 480 mm)
Recording Pixels
5.0x
6.1x
7.7x
13x
20x
: No image deterioration (zoom factor appears white)
: Image deterioration (zoom factor appears blue)
: Maximum zoom factor without deterioration (Safety Zoom)
* Focal length (35mm equivalent)
Turning off the digital zoom
To turn off the digital zoom, press the nbutton, choose the 4tab, and
choose [Digital Zoom] and the [Off] option.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Zooming in More Closely on Subjects (Digital Zoom)
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.5x or
2.0x. This enables a faster shutter speed and less chance of camera shake
than the zoom (including digital zoom) used by itself at the same zoom
factor.
The images may appear coarse, however, depending on the combination of
Choose [Digital Zoom].
● Press the nbutton.
● Press the qrbuttons to choose the 4
tab, and press the opbuttons or turn the
Âdial to choose [Digital Zoom].
Accept the setting.
● Press the qrbuttons to choose [1.5x] or
[2.0x].
● Pressing the nbutton will restore the
shooting screen.
X The view will be enlarged and the zoom
factor will appear on the screen.
● To return to standard digital zoom, choose
[Digital Zoom] and the [Standard] option.
Combinations that Cause Image Deterioration
• Using [1.5x] at a recording pixel setting of
deterioration (the zoom factor will display in blue).
• Using [2.0x] at a recording pixel setting of
deterioration (the zoom factor will display in blue).
or
will cause image
,
or will cause image
• The respective focal lengths when using [1.5x] and [2.0x] are 36.0 –
180 mm and 48.0 – 240 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
Choose [Date Stamp].
● Press the nbutton.
● Press the qrbuttons to choose the 4
tab, and press the opbuttons to choose
[Date Stamp].
Accept the setting.
● Press the qrbuttons to choose [Date] or
[Date & Time].
● Press the nbutton again to accept
the setting.
X [DATE] will appear on the screen.
Shoot.
X The shooting date and time will be
recorded in the image's lower right corner.
● To restore to the original setting, choose
[Off] in Step 2.
Inserting and printing the date and time in images without
an embedded date and time
• Use the included software to print.
Refer to the Software Guide for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the obutton.
Choose Ò.
● Press the opbuttons or turn the Âdial
to choose Ò, then press the mbutton.
X Once set, Òwill appear.
Shoot.
● Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
● To cancel shooting with the self-timer after
countdown has started, press the o
button.
● To restore the original setting, choose
in Step 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Using the Face Self-Timer
Once you compose the shot, such as for a group photo, press the shutter
button, and enter the composition, the camera will take three shots in a row
Choose ".
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
X When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release.
● To cancel the self-timer after it has
started, press the obutton.
X The second and third shots will continue in
succession.
● To restore the original setting, choose
What if a face is not detected?
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Special Effects for Night Backgrounds (Creative Light Effect)
Changing the number of shots
For the screen in Step 1, press the nbutton, then press the qrbuttons or
turn the Âdial to change the number of shots. Press the mbutton to accept
the setting
Special Effects for Night Backgrounds
(Creative Light Effect)
Light displays and other points of light in the night backgrounds behind your
subject can be changed into any of six predetermined shapes. Be sure to
use the flash when shooting.
Choose
.
.
Select a shape.
● Press the nbutton for more than one
second, then press the qrbuttons or turn
the Âdial to choose a shape.
● Press the opbuttons to change the size.
● Press the nbutton to make the
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Special Effects for Night Backgrounds (Creative Light Effect)
Shoot.
Shooting tips
• Hold the camera firmly and shoot non-moving points of light in as dark a location
as possible.
make sure your subject is not illuminated by any other light source.
Depending on the shooting conditions, such as when shooting moving
points of light, you may not get the selected shape or the expected scene
brightness.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
4
Choosing Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shooting skills.
• This chapter assumes that the mode switch is set to 4and the camera is
in Gmode.
• Gstands for Program AE.
switch had been set to 4and the Rmode chosen.
• Before attempting to shoot using a function explained in this chapter in
modes other than Gmode, check if the function is available in those
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Shooting in Program AE
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Choose G.
Adjust the settings according to
Shoot.
What if the shutter speed and aperture value are displayed
in orange?
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in orange. Try the following
settings to obtain the correct exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Choose the exposure
compensation.
● Touch
.
Adjust the brightness.
● While looking at the screen, touch the
Exposure Compensation bar and drag left
or right to adjust the brightness, then
touch
.
● You can also press the qrbuttons or turn
the Âdial to adjust the brightness.
● You can also adjust the exposure
compensation from the FUNC. menu
Exposure
Compensation Bar
Turning the Flash On
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 50 cm – 3.5 m (1.6 – 11 ft.), and at
maximum telephoto, it is 90 cm – 1.5 m (3.0 – 4.9 ft.)
Choose h.
● Touch
X Once set, hwill appear.
, then touch h.
● After pressing the rbutton, you can also
press the qrbuttons or turn the Âdial
to choose h.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme close-
ups of it. The shooting range is approximately 5 – 50 cm (2.0 in. – 1.6 ft.)
from the end of the lens (when the zoom lever is pushed to maximum j).
Choose e.
● After pressing the qbutton, press the qr
buttons or turn the Âdial to choose e,
then press the mbutton.
● Once set, ewill appear.
About the Zoom Bar
• When you move the zoom lever, the zoom bar appears on the monitor.
The camera cannot focus in ein the yellow portion of the bar.
• When zooming within the range of the yellow bar, ewill be grayed out
and shooting will be done in
.
How can I take better close-ups?
• You are recommended to attach the camera to a tripod and shoot in Î, to
• You can reduce the AF frame size when you want to focus on a specific
The edges of the image may darken if the flash fires.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Shooting Far Away Subjects (Infinity)
You can shoot landscapes and far away subjects. The focusing range is 3 m
(9.8 ft.) and greater from the camera.
Choose u.
● After pressing the qbutton, press the qr
buttons or turn the Âdial to choose u,
then press the mbutton.
X Once set, uwill appear.
Zooming In on Close Subjects (Digital Macro)
You can zoom in on close subjects. The possible shooting range is
approximately 5 – 10 cm (2.0 – 3.9 in.) from the end of the lens. However,
you can zoom in even closer on the subject using the digital zoom.
The digital zoom may cause images to appear coarse at some recording
Choose R.
X The optical zoom will lock at the maximum
wide angle.
Use the zoom lever to compose
the shot.
X The camera will zoom in and the zoom
factor will appear.
Zoom Factors at which Images Deteriorate
• No image deterioration (zoom factor appears white)
• Image deterioration (zoom factor appears blue)
Using Î
You are recommended to attach the camera to a tripod and shoot in Î, to prevent
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Changing the Recording Pixels
You can choose from six recording pixels (image size) settings.
Choose the recording pixels.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, then press the m
button.
X The setting you chose will display on the
screen.
If you choose
Changing the Compression Ratio
(Image Quality)
You can choose from the following two levels of compression ratio (image
quality):
(Fine),
(Normal).
Choose the image quality.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, then press the m
button.
X The setting you chose will display on the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Changing the Compression Ratio (Image Quality)
Approximate Values for Recording Pixels and Compression
Ratio
Number of Recordable
Compression Single Image Data
Images
Recording Pixels
Ratio
Size (Approx. KB)
2 GB
626
8 GB
2505
3084
1474
2060
980
(Large)
12 M/4000 x 3000
1280
930
5116
3721
(Medium 1)
8 M/3264 x 2448
1920
1365
2672
3235
6146
10245
15368
830
7675
1395
695
5457
(Medium 2)
5 M/2592 x 1944
10679
12927
24562
40937
61406
3318
558
(Medium 3)
2 M/1600 x 1200
278
150
(Small)
0.3 M/640 x 480
84
2311
1105
(Widescreen)
4000 x 2248
1707
6822
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
Approximate Values for Paper Size
●
Suitable for sending images as e-mail
attachments.
For printing on wide size paper.
A2
A3
●
A4, Letter size
5" x 7"
Postcard size
3.5" x 5"
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Changing the ISO Speed
Choose the ISO speed.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, then press the m
button.
X The setting you chose will display on the
screen.
Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
Low
Fine weather conditions, outdoor shooting.
Cloudy, Twilight
Nightscapes, Dark interiors
High
Changing the ISO speed
• Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
• Raising the ISO speed results in a faster shutter speed, reducing camera shake
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
• When the camera is set to
, you can press the shutter button halfway
to display the automatically set ISO speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors.
Choose the white balance.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, then press the m
button.
X The setting you chose will display on the
screen.
Auto
Automatically sets the optimal white balance for the shooting conditions.
Fine weather conditions, outdoor shooting
Day Light
Cloudy
Tungsten
Cloudy, shady, twilight conditions
Tungsten, bulb-type (3-wavelength) fluorescent lighting
Warm-white fluorescent, cool-white fluorescent, warm-white-type
(3-wavelength) fluorescent lighting
Fluorescent
Daylight fluorescent, daylight-type (3-wavelength) fluorescent
lighting
Fluorescent H
Custom
Manually sets a custom white balance.
Custom White Balance
You can adjust the white balance to the light source at the shooting location.
Make sure that you set the white balance under the light source of the actual
scene you will shoot.
● In Step 2 above, choose
.
● Make sure the entire screen is filled with a
white colored subject, then press the
nbutton.
X The tint on the screen will change when a
white balance data is set.
If you change camera settings after recording white balance data, the
tone may not turn out properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Continuous Shooting
You can shoot continuously at a fixed interval (0.8 shots/sec.).
Choose a Drive mode.
● Press the mbutton and choose
press the mbutton again.
, then
● Press the opbuttons or turn the Âdial
to choose W, then press the mbutton.
Shoot.
X
As long as you hold the shutter button down,
the camera will shoot successive images.
• For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Changing the Tone of an Image (My Colors)
You can change the tone of an image to sepia or black and white when shooting.
Choose My Colors.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, then press the m
button.
X The setting you choose will display on the
screen.
My Colors Off
Vivid
—
Emphasizes the contrast and color saturation for a vivid
impression.
Tones down the contrast and color saturation for neutral
hues.
Neutral
Sepia
B/W
Sepia tones.
Black and white.
Combines the effects of Vivid Red, Vivid Green and Vivid
Blue to produce intense natural appearing colors like those
obtained with positive film.
Positive Film
Lighter Skin Tone
Darker Skin Tone
Makes skin tones lighter.
Makes skin tones darker.
Emphasizes blue tints. Makes the sky, ocean and other
blue subjects more vivid.
Vivid Blue
Emphasizes green tints. Makes mountains, foliage and
other green subjects more vivid.
Vivid Green
Vivid Red
Emphasizes red tints. Makes red subjects more vivid.
You can adjust contrast, sharpness, and color saturation
Custom Color
• The white balance cannot be set in the
• In the and mode, colors other than people’s skin color may
change. You may not obtain the expected results with some skin colors.
and
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Shooting Using the Two Second Self-Timer
Custom Color
The contrast, sharpness, color saturation, red, green, blue, and skin tones in
an image can be chosen and set from 5 different levels.
press the nbutton.
, then
● Press the opbuttons to choose an
option, then use the qrbuttons or turn
the Âdial to choose a value.
● The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
●
Press the
setting.
nbutton to accept the
Shooting Using the Two Second Self-Timer
You can set the self-timer to a delay of approximately two seconds.
Choose Î.
● After pressing the obutton, press the
opbuttons or turn the Âdial to choose
Î, then press the mbutton.
X Once set, Îwill appear on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
● Press the obutton, then use the op
buttons or turn the Âdial to choose $,
then press the nbutton.
Choose the settings.
● Press the opbuttons to choose [Delay]
or [Shots].
● Press the qrbuttons or turn the Âdial
to choose a value, then press the m
button.
What if the number of shots is set to two or more shots?
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
Shooting Using a TV Monitor
You can use a TV to display the camera screen content while shooting.
•
• Shooting procedures are the same as when using the camera’s monitor.
You cannot use touch operations however.
TV display is not available when using the HDMI Cable HTC-100 (sold
separately) to connect the camera to a high-definition TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Changing the Composition with the
Focus Lock
While you keep the shutter button pressed halfway, the focus and exposure
are locked. You can now recompose and shoot. This is called Focus Lock.
Focus.
● Center the subject you want in focus, and
press the shutter button halfway.
● Confirm that a green AF frame appears
around the subject.
Recompose.
● Keep the shutter button pressed halfway
and recompose the scene.
Shoot.
● Press the shutter button fully.
Holding the Camera and Shooting
Vertically (Vertical Shutter)
You can touch
on the screen instead of the shutter button to shoot when
holding the camera vertically. You can still also use the shutter button.
Shoot.
● Hold the camera vertically.
X
will appear.
● Point the camera at the subject and touch
.
X When the camera focuses, it will beep
twice and take the shot right away. This is
unlike when you shoot with the shutter
button and first press it halfway.
To prevent the
icon from appearing, press the nbutton, select
the 4tab, and then select the [Vert. Shutter] menu item and the [Off]
option.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
5
Getting More Out of Your
Camera
This chapter serves as the advanced version of Chapter 4 and
explains how to take pictures using various functions.
• This chapter assumes that the mode switch is set to 4and the camera is
in Gmode.
the mode switch to 4and selected the corresponding mode.
• Before attempting to shoot using a function explained in this chapter in
modes other than Gmode, check if the function is available in those
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot. You can also use touch operations to change the position
of the AF frame or choose a subject to focus on without having to change AF
Choose [AF Frame].
● Press the nbutton, choose the 4
tab, and then choose the [AF Frame]
menu item. Use the qrbuttons to choose
an option.
Face AiAF
• Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
• When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces. When the shutter button is pressed halfway, up
to 9 green frames will appear on faces on which the camera focuses.
• If a face is not detected or only gray frames (no white frame) appear, up
to 9 green frames will appear on the areas the camera focuses on when
the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
Fixed frame
A single AF frame will be used. This is effective for focusing on a specific
point. You can also change the AF frame size.
You can reduce the AF frame size
• Press the nbutton, choose the 4tab, then choose the [AF Frame Size]
menu item and [Small] option.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Magnifying the Focal Point
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and
will appear.
Magnifying the Focal Point
You can push the shutter button halfway to magnify the AF frame and check
the focus.
Choose [AF-Point Zoom].
● Press the nbutton, choose the 4
tab, and then choose the [AF-Point Zoom]
menu item. Use the qrbuttons to choose
[On].
Check the focus.
● Press the shutter button halfway.
X In [Face AiAF], the face selected as the
main subject will appear magnified.
X In [Fixed frame], the contents of the AF
frame will appear magnified.
What if the display does not magnify?
The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [Fixed frame], it will not appear magnified
if the camera cannot focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
Lock the focus.
● Keep the shutter button pressed halfway
and press the qbutton.
X The focus locks and %is displayed on
the screen.
● If you release your finger from the shutter
button and press the qbutton again, %
will disappear and the focus will unlock.
Compose the scene and shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Shooting with Servo AF
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
● Press the n button and choose
[Servo AF] on the 4 tab, and use the qr
buttons to choose [On].
Focus.
● Focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
● If a face is not detected when AF Frame is
will be set to [Fixed frame].
• The camera may not be able to focus and set the exposure in some
conditions.
• If a correct exposure cannot be obtained, the shutter speed and aperture
value are shown in orange. Take your finger off the shutter button, then
press it again halfway.
• You cannot shoot with the AF lock in this mode.
• While in Servo AF mode, [AF-Point Zoom] in the 4 tab cannot be set
to [On].
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Choosing the Subject to Focus On
(Touch AF)
You can choose a specific subject or person's face, or a location on the
screen, to focus on and shoot.
Choose the subject, face or
location to focus on.
● Touch the subject or person shown on the
screen.
X When the AF frame mode is set to [Face
AiAF], the camera will beep and display
when it detects the subject. The
camera will continue to focus even if the
subject moves. If the camera does not
detect the subject,
will blink for a few
seconds and then disappear.
X When the AF frame mode is set to [Fixed
frame], an AF frame will appear at the
location where you touch the screen.
● The camera will return to the normal
shooting screen if it cannot detect the
subject to continue focusing on.
● To cancel, touch
.
Shoot.
● Press the shutter button halfway. The
frame will change into a green
.
● Press the shutter button fully to shoot.
• The camera may not be able to track the subject if the subject is too
small, moves too quickly or if the contrast between the subject and the
background is too low.
[Face AiAF], choosing a location to focus on returns the camera to
.
A border appeared around the screen when it was touched
Touch operations on faces or subjects appearing outside the border will not work.
They will work if the face or subject move inside the border.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Changing the Metering Mode
You can change the Metering mode (brightness measuring function) to
match the shooting conditions.
Choose the Metering mode.
● Press the mbutton and choose
press the mbutton again.
, then
Choose an option.
●
Press the opbuttons or turn the Â
dial to choose an option, then press the
button.
m
X
The setting will display on the screen.
Suitable for standard shooting conditions, including back
lit shots. Automatically adjusts the exposure to match the
the shooting conditions.
Evaluative
Averages the light metered from the entire frame, but
gives greater weight to the center.
Center Weighted Avg.
Spot
Only meters within the
(Spot AE Point frame).
Also, the Spot AE Point frame is linked with the AF frame
when the AF Frame mode is set to [Center].
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Shooting with the AE Lock
When you wish to take several shots with the same exposure, you can set the
exposure and focus separately using the AE lock. AE stands for “Auto Exposure”.
Lock the exposure.
● Point the camera toward the subject and
press the obutton while pressing the
shutter button halfway.
X When &appears, the exposure will be
set.
● If you release your finger from the shutter
button and press the obutton again, &
will disappear and the AE will unlock.
Compose the scene and shoot.
Shooting with the FE Lock
the flash. FE stands for “Flash Exposure”.
Lock the exposure.
● Point the camera toward the subject and
press the obutton while pressing the
shutter button halfway.
X The flash will fire and when (appears,
the flash output will be retained.
● If you release your finger from the shutter
button and press the obutton again, (
will disappear and the FE will unlock.
Compose the scene and shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Shooting with Slow Synchro
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose ….
● Touch
X Once set, …will appear.
, then touch ….
● After pressing the rbutton, you can also
press the qrbuttons or turn the Âdial
to choose ….
Shoot.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Correcting the Brightness and Shooting
(i-Contrast)
The camera can detect areas in the scene, such as faces or backgrounds,
that are too bright or dark and automatically adjust them to the optimum
brightness when shooting. Also, when the overall image is lacking in
contrast, the camera will automatically correct the image for a sharper
impression when shooting.
Choose [i-Contrast].
● Press the nbutton, choose the 4
tab, and then choose the [i-Contrast]
menu item. Use the qrbuttons to choose
[Auto].
X @will appear on the screen.
Under some conditions, the image may appear coarse or may not be
corrected properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Red-Eye Correction
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
● Press the nbutton, choose [Flash
Settings] from the 4tab and press the
mbutton.
Adjust the setting.
● Press the opbuttons or turn the Âdial
to choose [Red-Eye Corr.] and press the
qrbuttons to choose [On].
X Œwill appear on the screen.
Red-eye correction may be applied to red areas other than red eyes. For
example, when red make-up has been used around eyes.
Checking for Shut Eyes
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
● Press the nbutton, choose the 4
tab, and then choose the [Blink Detection]
menu item. Use the qrbuttons to choose
[On].
Shoot.
X When a person with shut eyes is detected,
a frame and
appear for a few seconds.
• In "and $modes, this function is only available for the last image
shot.
• Not available in W.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Choose ≈.
Choose the shutter speed.
● Press the mbutton, then press op
buttons or turn the Âdial to choose [1"]
and press the mbutton.
● Press the opbuttons or turn the Âdial
to choose a shutter speed, then press the
mbutton.
Confirm the exposure.
● When you press the shutter button
halfway, the exposure for the chosen
shutter speed will appear.
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• It is recommended to set the [IS Mode] to [Off] when shooting with a
If the flash fires, the image may be overexposed. If this happens, set the
flash to !and shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Changing the Color and Shooting
You can change the look of an image when shooting. However, the shooting
conditions may cause the image to become coarse, or the colors may not
come out as expected.
TColor Accent
You can choose to retain a single color and change the rest to black and
white in a composition.
Choose T.
Press the nbutton for more
than one second.
X The unchanged image and the Color
Accent image will both display.
● The color for default settings is green.
Specify the color.
● Position the center frame so it is filled with
the color you want and press the qbutton.
X The specified color will be recorded.
Specify the range of colors.
●
Press the opbuttons or turn the
Âdial
Recorded color
to change the range of colors to be retained.
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar
colors.
● Pressing the nbutton accepts the
setting and restores the shooting screen.
Using the flash may cause unexpected results in this mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Changing the Color and Shooting
YColor Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose Y.
Press the nbutton for more
than one second.
X The unchanged image and the Color
Swap image will both display.
● The default setting is to change green to
gray.
Specify the color to be swapped.
● Position the center frame so it is filled with
the color you want and press the qbutton.
X The specified color will be recorded.
Specify the target color.
● Position the center frame so it is filled with
the color you want and press the rbutton.
X The specified color will be recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Changing the Color and Shooting
Specify the range of colors to be
swapped.
●
Press the opbuttons or turn the
Âdial
to adjust the range of colors affected.
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar
colors.
● Pressing the nbutton accepts the
setting and restores the shooting screen.
• Using the flash may cause unexpected results in this mode.
• Under some conditions, the image may appear coarse.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Shooting Stitch Assist Images
Large subjects can be split into several shots that can later be merged together
using the included software on a computer to create a panoramic image.
Choose L.
L.
Choose a shooting direction.
● Turn the Âdial to choose a shooting
direction.
Take the first shot.
X The exposure and white balance will be
set with the first shot.
Take subsequent shots.
● Overlap part of the first shot when taking
the second shot.
● Minor discrepancies in the overlapping
portions will be corrected when the
images are merged.
● Up to 26 shots can be recorded with the
same procedures.
Finish shooting.
● Press the mbutton.
Merge the images on a computer.
● For details on how to merge the images,
refer to the Software Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Changing the Movie Mode
You can choose between three Movie modes.
Set the mode switch to E.
Choose a Movie mode.
● Touch
, then touch a movie mode.
Touch the screen again to make the
setting.
● You can also choose movie modes from
XStandard
Normal mode.
These Shooting modes let you change all colors except the chosen
color to black and white, or exchange the chosen color for another
color, when shooting. See “Changing the Color and Shooting”
(p. 93) for details.
>Color Accent
zColor Swap
Under some conditions, colors may not turn out as expected in the >and
zmode.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
Changing the Image Quality
You can choose between three image quality settings.
Choose the image quality.
● Press the mbutton, then use the op
buttons or turn the Âdial to choose
then press the mbutton again.
,
Choose an option.
● Press the opbuttons or turn the Âdial
to choose an option, and press the m
button.
X The setting will display on the screen.
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
Content
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
Since the number of recording pixels is smaller,
320 x 240 pixels, 30 frames/sec. the image quality will be lower than with
but you can record three times the length.
,
Estimated Shooting Time
Image Quality
(Frame Rate)
Shooting Time
2 GB
8 GB
10 min. 53 sec.
43 min. 32 sec.
23 min. 49 sec.
1 hr. 35 min. 11 sec.
4 hrs. 52 min. 24 sec.
1 hr. 13 min. 10 sec.
• Based on Canon’s testing standards.
• Maximum clip length is approximately 10 minutes in
Recording also stops when the file size reaches 4 GB.
, 1 hour in
and
.
•
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
AE Lock/Exposure Shift
You can set the exposure or change it in 1/3 steps within a range of ±2.
Focus.
● Press the shutter button halfway to focus.
Lock the exposure.
● After releasing the shutter button, press
the rbutton to lock the exposure. The
exposure shift bar appears.
● Press the rbutton again to release the
lock.
Change the exposure.
● While watching the screen, turn the Â
dial to adjust the brightness.
Shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Other Shooting Functions
The following functions can be used in the same way as for still images. For
>and zmodes, the functions with an * attached can be used in the same
way as for still images.
You can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum zoom factor, you should adjust the optical
zoom to the maximum before shooting.
The sound of the zoom will be recorded.
[3:2 Guide] is not available.
You can switch between [Continuous] and [Off].
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Playback Functions
The following functions can be used in the same way as for still images.
Summary for “Viewing Movies” (p. 33)
Exit
Playback
Slow Motion Playback (you can use the qrbuttons to adjust the speed. Sound
will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the mbutton.)
Next frame (Fast forward if you hold down the mbutton.)
Display the last frame
Edit (p. 103)
Refer to the Personal Printing Guide for details.
Touch operations are not available while the movie operation panel
appears on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Editing
You can trim the beginnings and ends of recorded movies in one-second
increments.
Choose *.
the movie control panel that appears and
press the mbutton.
X The movie editing panel and the movie
editing bar will appear.
Movie Editing Panel
Set the editing range.
● Press the opbuttons and choose
or
.
● Press the qrbuttons or turn the Âdial
to move
.
will display at each one-
second interval. If you choose
, you
can trim the beginning of the movie from
. If you choose
end of the movie from
, you can trim the
.
Movie Editing Bar
X Even if you move to a point other than a
point, only the portion from the
nearest
when
to the left will be trimmed
is chosen. Only the portion from
the nearest
to the right will be trimmed
when is chosen.
X The light gray section indicated with will
be the section of the movie that remains
after editing.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Editing
Check the edited movie.
● Press the opbuttons to choose
(Play), then press the mbutton. The
edited movie will play.
● To edit the movie again, repeat Step 2.
● To cancel editing, press the opbuttons,
and choose
. After pressing the m
button, press the qrbuttons or turn the
Âdial to choose [OK], and press the m
button again.
Save the edited movie.
● Press the opbuttons to choose
then press the mbutton.
,
● Press the qrbuttons or turn the Âdial
to choose [New File], then press the m
button.
X The movie will be saved as a new file.
• When [Overwrite] is chosen in Step 4, the unedited movie is overwritten
with the edited movie, erasing the original movie.
• When there is not enough space left on the memory card, only
[Overwrite] can be chosen.
• If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
Download from Www.Somanuals.com. All Manuals Search And Download.
104
7
Using Playback and Other
Functions
The first part of this chapter explains various ways to play back and
edit images. The latter part explains how to specify images for printing.
• Press the 1button to enter Playback mode before operating the camera.
• It may not be possible to play back or edit images that have been edited
on a computer, had their file name changed, or have been taken on a
different camera.
does not have free space available.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Quickly Searching Images
gSearching Images Using Index Display
Displaying multiple images at a time lets you quickly find the image you want.
Display images in an index.
● Double tap the screen to display images in
an index.
● The number of images increases each
time you double tap the screen.
● You can also move the zoom lever toward
gto display images in an index. Move
the zoom lever toward kto reduce the
number of images.
Change the displayed images.
● Quickly drag vertically to switch to the next
set of images set in Step 1.
● You can also turn the Âdial or tilt the
camera gently from your wrist (Active
images.
Choose an image.
● Touching an image will display that image
by itself.
● An orange frame appears on the chosen
image.
● You can also drag across the screen or
press the opqrbuttons choose an
image.
● You can also press the mbutton to
display the chosen image by itself.
Since the camera uses a pressure sensitive touch panel, if the Index
Display does not change as expected when you double tap the screen, try
double tapping slightly harder or use the toggle attached to the strap to
Download from Www.Somanuals.com. All Manuals Search And Download.
106
Quickly Searching Images
Searching Images by Scrolling
Dragging across the screen or turning Âwill display images in a line (Scroll
Display) letting you quickly search them. You can also jump by shooting
date.
Choose an image.
● You can switch between images in single
image playback by dragging horizontally
across the screen.
Continuously dragging quickly across the
screen will display the screen on the left.
● If you quickly drag vertically, you can
search images by the shooting date.
● Touching the center image restores single
image playback.
● You can also turn the Âdial to start
Scroll Display. If you press the op
buttons, you can also search images by
the shooting date. Pressing the mbutton
restores single image playback.
To turn off this effect, press the
in the tab and choose [Off].
nbutton, then choose [Scroll Display]
1
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Viewing Images in Filtered Playback
When there are many images on the memory card, you can filter and display
images at once while filtered.
Choose ‚.
● Press the mbutton to choose ‚in the
FUNC. menu, then press the mbutton
again.
Choose a filter.
● Press the opbuttons or turn the Âdial
to choose a filter, then press the m
button.
View the filtered images.
● Press the opbuttons or turn the Âdial
to choose a filter for playback, then press
the mbutton (unnecessary when
selected).
is
X Filtered playback starts and a yellow
frame appears.
● If you drag horizontally across the screen,
only the images chosen in Step 2 will
display.
● You can also press the qrbuttons or turn
the Âdial to choose the images.
● If you choose [All Images] in Step 2,
filtered playback will be canceled.
Search by
,
, ;and
Displays the images shot on a specified date
Displays the images of a specified category (p. 122)
Displays only still images or movies
Favorites
Shot Date
My Category
File Type
;
What if you can’t choose a filter?
Filters that do not contain any images cannot be chosen.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Viewing Slideshows
Filtered Playback
You can filter images during a slideshow so that only certain images will play
back. You can also use the following functions in filtered playback for processing
all the filtered images at once.
,
,
Print List (DPOF)” (p. 132)
Viewing Slideshows
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Start the slideshow.
● Drag as shown.
X The slideshow will start a few seconds
after [Loading image…] displays.
matching a filter play back.
● You can pause/restart a slideshow by
pressing the mbutton.
● Touch the screen or press the n
button to stop the slideshow.
● You can also start a slideshow from the
• If you press the qrbuttons or turn the Âdial during playback, the
image will switch. If you keep the qrbuttons pressed, you can fast-
forward through images.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Viewing Slideshows
Changing Settings
You can set a slideshow to repeat, or change transition effects and the time
that slideshow images are displayed. You can choose from six transition
effects when switching between images.
Choose [Slideshow].
● Press the nbutton, choose
[Slideshow] from the 1tab and press the
mbutton.
Make the setting.
● Press the opbuttons or turn the Âdial
to choose an item, and press the qr
buttons to adjust the setting.
● If you choose [Start] and press the m
button, the slideshow starts with your
settings.
● Pressing the nbutton will restore the
menu screen.
You cannot change [Play Time] if [Bubble] is chosen in [Effect].
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the
p
button, and switch to
X
A white frame will appear where the AF
frame or face was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Switch frames.
● Move the zoom lever toward kto change
the display.
X The screen shown to the left will appear.
● Press mto move to a different frame
when multiple frames appear.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the opqrbuttons to change the
display position while checking the focus.
● Pressing the nbutton resets the
display to Step 1.
Quickly checking the focus (Active Display)
If you shake the camera gently as shown in the
illustration, you can quickly switch to the focus
check display. If you gently shake the camera
again when multiple frames are displayed, you
can switch to another frame. If you shake the
camera again after you reach the last frame, you
will cycle back to the first frame.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Magnifying Images
Magnify an image.
● When you touch the screen, the display
will zoom in on the image and
appear.
will
● Repeatedly touching the screen will zoom
in on that part of the image up to a factor
of 10x.
● If you drag across the screen, you can
move the location of the displayed area.
● Double tapping the screen will return to
single image playback.
● Touching the
magnification.
will reduce the
ApproximateLocation
of Displayed Area
● You can also turn the Âdial or tilt the
camera gently from your wrist (Active
at the same zoom factor.
• You can also zoom in on the image by moving the zoom lever toward
k. If you continue to hold the zoom lever, the display will continue to
zoom in up to a factor of 10x. If you move the zoom lever toward g,
you can reduce the magnification. If you continue to hold the zoom
lever, you will return to single image playback.
• While the image is magnified, you can also press the opqrbuttons
to move the location of the displayed area.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Changing Image Transitions
You can choose from three transition effects when switching between
images in single image playback.
Choose [Transition].
● Press the nbutton and choose the
1tab, then choose [Transition] and use
the qrbuttons to choose a transition
effect.
Easy Operations with Touch Actions
In single image playback, you can quickly and easily call up functions that
have been registered to each of four set dragging patterns (Touch Actions).
Use a Function Registered to
● Drag across the screen as shown.
X The function registered to
will be
called up.
● You can change the functions registered
to Touch Actions.
● By dragging across the screen as shown,
you can also call up the functions
registered to
,
and
.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Easy Operations with Touch Actions
Changing Touch Actions Registered Functions
You can register the functions you want to use easily to each of the drag
patterns.
Choose [Set Touch Actions].
● Press the nbutton, choose the 1
tab and [Set Touch Actions], and press
the mbutton.
Register a function to a drag
pattern.
● Press the opbuttons or turn the Âdial
to choose a drag pattern.
● Press the qrbuttons to choose the
function to register.
Functions that Can be Registered
Favorites
Tag or untag images as favorites.
Switch to the next image tagged as a favorite
Switch to the previous image tagged as a favorite.
Switch to first image with the next shooting date.
Switch to first image with the previous shooting date.
View a slideshow.
Next Favorite
Previous Favorite
Next Date
Previous Date
Slideshow
Erase
Erase an image.
Protect
Protect or unlock images.
Rotate
Rotate an image.
To turn off Touch Actions, follow Step 2 above and press the op
buttons or turn the Âdial to choose [Touch Actions], then use the qr
buttons to choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s terminal cover and
fully insert the plug of the cable into the
camera’s terminal.
● Insert the cable plug fully into the video
input terminals as shown in the illustration.
White or black
Turn on the TV and switch it to the
Yellow
input to which the cable is
connected.
Yellow
Black
Turn on the camera.
● Press the 1button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the monitor of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if the images don’t properly display on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the nbutton, choose the 3tab and
[Video System] to switch to the correct video system.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Viewing Images on a High-Definition TV
Use the separately sold HDMI cable HTC-100 to connect the camera to a
high-definition TV for an enhanced viewing experience.
Turn off the camera and TV.
Connect the camera to the TV.
● Open the cover and fully insert the cable
plug into the camera's HDMI terminal.
● Fully insert the cable plug into the TV's
HDMI terminal.
images.
Operation sounds will not play when connected to a high-definition TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
Protecting Images
You can protect important images so that they cannot be erased by the
Choose :.
● Press the mbutton to choose :in the
FUNC. menu, then press the mbutton
again.
X Once set,
will appear on the screen.
● To unlock an image, choose :from the
FUNC. menu and press the mbutton.
erased.
• Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
• You can also protect images using the following method. Press the
nbutton, choose the 1tab, then choose [Protect]. Press the m
button to choose [Select] and press the mbutton again, then press the
qrbuttons to choose an image and press the mbutton.
Select Range
Choose [Protect].
● Press the nbutton, choose the 1
tab and [Protect], and then press the m
button.
Choose [Select Range].
● Press the opbuttons or turn the Âdial
to choose [Select Range] and press the
mbutton.
● Pressing the nbutton will restore the
menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Protecting Images
Choose the starting image.
● Press the mbutton.
● Drag horizontally across the screen to
choose an image and press mbutton.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Choose the ending image.
● Press the rbutton, choose [Last image]
and press the mbutton.
● Drag horizontally across the screen to
choose an image and press mbutton.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
● You cannot choose images before the first
image.
Protect images.
● Press the pbutton, choose [Protect] and
press the mbutton.
Choose images with the Âdial
You can also choose the first or last image by turning the Âdial when the upper
screen in Steps 3 and 4 is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Erasing All Images
Choose All Images
Choose [All Images].
Images] and press the mbutton.
Protect images.
●
Press the opbuttons or turn the Âdial
to choose [Protect] and press the
button.
m
You can unlock groups of protected images if you choose [Unlock] in
Step 5 while in [Select Range], or Step 2 while in [All Images].
Erasing All Images
You can choose images and erase them in groups. Since erased images
cannot be recovered, exercise adequate caution before erasing. Protected
Choose [Erase].
● Press the nbutton, choose the 1
tab and [Erase], and press the mbutton.
Choose a selection method.
● Press the opbuttons or turn the Âdial
to choose a selection method, and press
the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Erasing All Images
Choosing Images Individually
Choose [Select].
and press the mbutton.
Choose images.
● Drag horizontally across the screen to
choose an image and press mbutton.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
X Once set,
will appear on the screen.
● Pressing the mbutton once more will
cancel the selection, and
disappear.
will
● To choose multiple images, repeat the
above operation.
Press the nbutton.
Erase.
● Press the qrbuttons or turn the Âdial
to choose [OK] and press the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
Erasing All Images
Select Range
Choose [Select Range].
Range] and press the mbutton.
images.
Erase.
● Press the pbutton to choose [Erase],
then press the mbutton.
Choose All Images
Choose [All Images].
Images] and press the mbutton.
Erase.
● Press the qrbuttons or turn the Âdial
to choose [OK] and press the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Organizing Images by Category
(My Category)
You can organize images in categories. You can display the images in a
using the functions below.
Choose ;.
● Press the mbutton to choose ;in the
FUNC. menu, then press the mbutton
again.
Make the setting.
● Press the opbuttons to choose a
category, then press the mbutton.
X Once set,
will appear on the screen.
Images are automatically categorized by shooting condition as they are shot.
: Images with detected faces, or images shot in I, F, Vmodes.
: Images detected as
U, Oor
: Images shot in H, t, w, y, P.
or
in Amode, or images shot in
.
Using the Menu
Choose [My Category].
● Press the nbutton, choose the 1
tab and [My Category], and press the m
button.
Choose a selection method.
● Press the opbuttons or turn the Âdial
to choose a selection method and press
the mbutton.
● Pressing the nbutton will restore the
menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Organizing Images by Category (My Category)
Choosing Images Individually
Choose [Select].
and press the mbutton.
● Drag horizontally across the screen to
choose an image and press mbutton.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
● Press the opbuttons, choose a
category and press the mbutton.
X Once set,
will appear on the screen.
● Pressing the mbutton again deselects
the category and disappears.
● To choose multiple images, repeat the
above operation.
Select Range
Choose [Select Range].
Range] and press the mbutton.
images.
● Press the pbutton, choose the item and
press the qrbuttons, or turn the Âdial
to choose a type.
Choose the setting.
● Press the pbutton to choose [Select] and
press the mbutton.
If you choose [Deselect] in Step 2, you can deselect all of the images in
the [Select Range] category.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Tagging Images as Favorites
When you tag images as favorites, you can perform operations on just those
Select an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Tag an image as a favorite.
● Drag as shown.
X When you view a tagged image in
Detailed Information Display,
will
appear on the screen.
● Drag again to untag the image.
If you use Windows Vista and transfer tagged images to the computer,
they will be given a star rating of 3 ( ). If you change
their star ratings with the computer to anything other than 0 or 3 and
transfer the images back to the camera, you will not be able to untag the
images as a favorites (
will be grayed out).
• If you chose
in the FUNC. menu and press the mor n
buttons, you will not be able to tag or untag images as favorites even if
you choose [Favorites] in the 1tab and press the mbutton.
Easily display images tagged as favorites
In Playback mode, if you drag as shown
, only
images tagged as favorites will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
Rotating Images
You can change the orientation of an image and save it. Movies with a
resolution of
cannot be rotated.
Choose \.
● Press the mbutton to choose \in the
FUNC. menu, then press the mbutton
again.
Rotate the image.
● Press the qrbuttons, the image will
rotate 90° in the chosen direction.
● Press the mbutton to make the setting.
Using the Menu
Choose [Rotate].
● Press the nbutton, choose the 1
tab and [Rotate], and press the mbutton.
Rotate the image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
X The image will rotate 90° with each press
of the mbutton.
● Pressing the nbutton will restore the
menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Resizing Images
You can resize images to a lower pixel setting and save the resized image
as a separate file.
Choose [Resize].
● Press the nbutton and choose the
1tab, then choose [Resize] and press
the mbutton.
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Choose an image size.
● Press the qrbuttons or turn the Âdial
to choose an option, then press the m
button.
X The [Save new image?] screen will
appear.
Save the new image.
● Press the qrbuttons or turn the Âdial
to choose [OK] and press the mbutton.
X The image will be saved as a new file.
Display the new image.
● When you press the nbutton, the
[Display new image?] screen will appear.
● Press the qrbuttons or turn the Âdial
to choose [Yes] and press the mbutton.
X The saved image will display.
• You cannot resize an image to a larger size.
• You cannot resize images taken with the
and
settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
● Press the nbutton, choose the 1
tab and [Trimming], then press the m
button.
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Trimming Area
Adjust the trimming area.
X A frame will appear around the portion of
the image to be trimmed.
X The original image will display in the upper
left and the trimmed image will display in
the lower right.
● If you move the zoom lever to the left or
right, you can change the frame size.
● If you press the opqrbuttons, you can
move the frame.
Trimming Area Display
Recorded pixels
after trimming
● If you press the mbutton, you can
change the frame size.
● In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch
between frames by turning the Âdial.
● Press the nbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Trimming
Save as a new image and display.
•
,
, and
images cannot be trimmed.
• The width and height ratio of an image that can be changed is fixed at
4:3 (for a vertical image 3:4).
• The number of recorded pixels in a trimmed image will be smaller than
before trimming.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
Adding Effects with the My Colors
Function
You can change the color of an image and save it as a separate image.
Choose [My Colors].
● Press the nbutton, choose the 1
tab and [My Colors], and press the m
button.
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Choose a menu option.
● Press the qrbuttons or turn the Âdial
to choose an option.
● If you move the zoom lever, you can zoom
in on or out from images.
● If you press the mbutton during
magnified display, you can switch to the
original image. Pressing the nbutton
restores the menu screen.
● Press the mbutton.
Save as a new image and display.
• If you repeatedly change the color of an image, the quality will gradually
deteriorate and you may not achieve the expected color.
• The coloration of images changed with this function may vary from those
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Correcting the Brightness (i-Contrast)
The camera can detect areas in an image, such as faces or backgrounds,
that are too dark and automatically adjust them to the optimum brightness.
Also, when the overall image is lacking in contrast, the camera will
automatically correct the image for a sharper impression.
Choose [i-Contrast].
● Press the nbutton, choose the 1
tab and [i-Contrast], then press the m
button.
Choose an image.
● Drag horizontally across the screen to
choose an image, then press the m
button.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Choose a menu item.
● Press the qrbuttons or turn the Âdial
to choose an option, then press the m
button.
Save as a new image and display.
What if the image wasn’t corrected by the [Auto] option as
well as you would like?
Choose [Low], [Medium] or [High] and adjust the image.
• Under some conditions, the image may appear coarse or the exposure
setting may not be suitable.
• Repeatedly adjusting the same image may cause the quality to
deteriorate.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new
files.
Choose [Red-Eye Correction].
● Press the nbutton, choose the 1
tab and [Red-Eye Correction], then press
the mbutton.
X The [Red-Eye Correction] screen will
appear.
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Correct the image.
● Press the mbutton.
X Red-eye detected by the camera will be
corrected and a frame will appear around
the corrected portion.
● If you move the zoom lever, you can zoom
in on or out from images.
Save as a new image and display.
● Press the opqrbuttons, or turn the Â
dial to choose [New File], and press the
mbutton.
X The image will be saved as a new file.
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is chosen, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
Printing from the Print List (DPOF)
You can add images to the print list (DPOF) directly after shooting or while in
playback with the FUNC. menu. You can print from a print list simply by
connecting your camera and printer. These selection methods comply with
the DPOF (Digital Print Order Format) standards.
Easily Add Images to the Print List
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
Choose c(videos will be
excluded).
● Press the mbutton to choose cin the
FUNC. menu, then press the mbutton
again.
Print list.
● Press the opbuttons and choose the
number of prints, press the qrbuttons or
turn the Âdial to choose [Add] and
press the mbutton.
● To remove an image from the print list,
select the added image and follow Step 2,
then press the qrbuttons or turn the Â
dial to select [Remove] and press the m
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Printing from the Print List (DPOF)
Print Added Images
The following examples use the Canon SELPHY series printers. Please also
refer to the Personal Printing Guide.
Number of copies to print
Connect the camera to the printer
Print.
● Press the opbuttons, choose [Print
now] and press the mbutton.
X Printing will start.
● If you stop the printer during printing and
start again, it will start from the next print.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
Choosing Images for Printing (DPOF)
You can choose up to 998 images on a memory card for printing and specify
the number of print copies so that they can be printed together or processed
at a photo developer service. These selection methods comply with the
DPOF (Digital Print Order Format) standards.
Print Settings
You can set the print type, date and file number. These settings apply to all
images chosen for printing.
Choose [Print Settings].
● Press the nbutton and choose the
2tab, then choose [Print Settings] and
press the mbutton.
Adjust the settings.
● Press the opbuttons or turn the Âdial
to choose a menu item, then press the qr
buttons to choose an option.
X Pressing the nbutton accepts the
settings and restores the menu screen.
Standard Prints one image per page.
Print Type
Index
Both
On
Prints several reduced size images per page.
Prints both standard and index formats.
Prints the date from the shooting information.
Date
File No.
Off
–
On
Prints the file number.
Off
–
On
Removes all print settings after printing.
–
Clear DPOF data
Off
• Some printers or photo developer services may not be able to reflect all
of the print settings in the output.
•
may appear when using a memory card with print settings set by a
different camera. These settings will be overwritten with those set by
your camera.
• Images with the date embedded always print with the date, regardless of
the [Date] setting. As a result, some printers may print the date twice on
these images if [Date] is also set to [On].
Download from Www.Somanuals.com. All Manuals Search And Download.
134
Choosing Images for Printing (DPOF)
• With [Index] chosen, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
Choosing the Number of Copies
Choose [Select Images & Qty.].
● Press the nbutton and choose the
2tab, then choose [Select Images &
Qty.] and press the mbutton.
Choose an image.
● Drag horizontally across the screen to
choose an image.
● You can also press the qrbuttons or turn
the Âdial to choose an image.
X You will be able to set the number of print
copies.
● If you choose [Index],
screen. Pressing the mbutton again will
deselect the image and will disappear.
appears on the
Set the number of prints.
● Press the opbuttons or turn the Âdial
to set the number of prints (maximum 99).
● Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
● You cannot set the number of print copies
for index prints. You can only choose
which images to print.
● Press the nbutton to accept the
settings and restore the menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
Choosing Images for Printing (DPOF)
Select Range
Choose [Select Range].
● Choose [Select Range] in Step 1 on
● Choose images according to Steps 3 and
Make print settings.
● Press the opbuttons, choose [Order]
and press the mbutton.
Set All Images to Print Once
Choose [Select All Images].
● Choose [Select All Images] in Step 1 on
Make print settings.
● Press the qrbuttons or turn the Âdial
to choose [OK] and press the mbutton.
Clearing All Selections
Choose [Clear All Selections].
● Choose [Clear All Selections] in Step 1 on
All selections will be cleared.
● Press the qrbuttons or turn the Âdial
to choose [OK], then press the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
8
Customizing the Camera
You can customize various functions to suit your shooting
preferences. The first part of this chapter explains convenient and
commonly used functions. The latter part explains how to change
shooting and playback settings to suit your purposes.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Changing Functions
You can customize convenient and commonly used functions from the 3
tab.
Turning off Hints & Tips
When you make a setting by touching the screen in a Shooting mode, or
opqrbuttons, hints and tips display. You can turn off this function.
● Choose [Hints & Tips], then press the qr
buttons to choose [Off].
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
● Choose [File Numbering], then press the qr
buttons to choose an option.
Even if you shoot using a new memory
card, the file numbers are assigned
consecutively until an image with the
Continuous
number 9999 is taken/saved.
If you replace the memory card with a
Auto Reset new one, file numbering begins with
0001 again.
• If you use a memory card already containing images, the newly
assigned file numbers may continue the existing numbering for both the
[Continuous] and [Auto Reset] settings. If you want to start over with file
• Refer to the Software Guide for information regarding folder structure or
image types.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Changing Functions
Creating a Folder by Shooting Date
Images are saved into folders created each month, however, you can also
create folders by shooting date.
● Choose [Create Folder], then press qr
buttons to choose [Daily].
● Images will be saved into folders created on
each shooting date.
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
[0 sec.].
● Choose [Lens Retract], then press the qr
buttons to choose [0 sec.].
Download from Www.Somanuals.com. All Manuals Search And Download.
139
Changing Functions
Turning off the Power Saving Function
recommended to save battery power.
● Choose [Power Saving], then press the m
button.
● Press the opbuttons or turn the Âdial to
choose [Auto Power Down], then use the qr
buttons to choose [Off].
● If you set the power saving function to [Off], be
careful not to forget to turn off the camera after
use.
Setting the Screen Shut-Off Time
This also works when [Auto Power Down] is set to [Off].
● Choose [Power Saving], then press the m
button.
● Press the opbuttons or turn the Âdial to
choose [Display Off], then use the qrbuttons
to choose a time.
● In order to save battery power, it is
recommended to choose less than [1 min.].
Download from Www.Somanuals.com. All Manuals Search And Download.
140
Changing Functions
Using the World Clock
When traveling abroad, you can record images with local dates and times simply
by switching the time zone setting if you pre-register the destination time zones.
You can enjoy the convenience of not having to switch the Date/Time settings.
Set the home time zone.
● Choose [Time Zone] and press the m
button.
● When setting this for the first time, check
the information that displays on the screen
at the left, and press the mbutton.
● Press the qrbuttons or turn the Âdial
to choose the home time zone, then press
the mbutton. To set daylight saving time
(adds 1 hour), press the opbuttons to
choose
.
Set the world time zone.
● Press the opbuttons or turn the Âdial
to choose
, then press the mbutton.
● Press the qrbuttons or turn the Âdial
to choose the destination time zone, then
press the mbutton.
● You can also set the daylight saving time
as in Step 1.
Choose the world time zone.
● Press the opbuttons or turn the
to choose [Home/World].
Â
dial
●
Press the qrbuttons to choose
press the button.
, then
n
X
will appear in the [Time Zone] or
If you change the date or time in the
date will automatically change.
time and
Download from Www.Somanuals.com. All Manuals Search And Download.
141
Changing Functions
Changing the Date and Time
You can change the date and time settings.
● Choose [Date/time], then press the mbutton.
● Press the qrbuttons to select an item, then
use the opbuttons or turn the Âdial to
choose a value.
Calibrating the Touch Panel
You can calibrate the touch panel if you are having difficulty choosing items
or buttons. Be sure to use the toggle attached to the strap to calibrate the
touch panel.
● Choose [Calibration], then press the m
button.
● Use the toggle attached to the strap to touch
● Follow the on-screen instructions and touch
the screen four times in the following order: in
the upper left, lower left, lower right and upper
right parts of the screen.
Only use the attached toggle to perform operations. Do not use other
objects, such as pens or pencils.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
Changing Shooting Functions
If you set the mode switch to 4, and the mode to G, you can change the
Before attempting to shoot using a function explained in this chapter in
modes other than Gmode, check if the function is available in those
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
● Choose [AF-assist Beam], then press the qr
buttons to choose [Off].
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Choose [Flash Settings], then press the m
button.
● Press the opbuttons or turn the Âdial to
choose [Red-Eye Lamp], then press the qr
buttons to choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Changing Shooting Functions
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Choose [Review], then press the qrbuttons
to choose an option.
2 – 10 sec. Displays images for the set time.
The image displays until you press the
shutter button halfway.
Hold
Off
No image displays
Changing the Way the Image Displays Right
After Shooting
You can change the way the image displays after shooting.
● Choose [Review Info], then press the qr
buttons to choose an option.
Off
Only displays the image taken.
Detailed
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as in
Focus Check
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Changing Shooting Functions
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints.
● Choose [Disp. Overlay], then press the qr
buttons to choose an option.
Grid Lines
3:2 Guide
A grid overlays the display.
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Both grid lines, and the 3:2 guide will
display.
Both
• In
mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray areas.
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qrbuttons
to choose an option.
Image stabilization is always on. You
can confirm the result directly on the
display, which makes it easier to check
the composition or focus.
Continuous
Shoot Only
Panning
Image stabilization is only active at the
moment of shooting.
Image stabilization only counters up
and down motion. This option is
recommended for shooting objects
moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is attached
to a tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Changing Playback Functions
Turning Off Active Display
You can turn off Active Display so that gently shaking or tilting the camera
does not perform any of the following operations.
● Choose [Active Display], then press the qr
buttons to choose an option.
● Press the qrbuttons to choose [Off].
Choosing the Image that First Displays
in Playback
● Choose [Resume], then press the qrbuttons
to choose an option.
Last seen Resumes with the image last viewed.
Resumes with the most recently shot
Last shot
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
Changing the Start-up Image or Sound
In the 3tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation.
Change Sounds
● Choose [Sound Options], then press the m
button.
● Press the opbuttons or turn the Âdial to
choose an option.
● Press the qrbuttons to choose a setting.
1
Preset sounds.
You can register your sounds using the supplied
2
Changing the Start-up Screen
● Choose [Start-up Image], then press the m
button.
● Press the qrbuttons to choose a setting.
No start-up image.
1
2
Preset images.
You can register your images.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
Changing the Start-up Image or Sound
Registering the Start-up Screen
When you press the 1button and set the camera to Playback mode, you
can register sounds and images.
● Choose [Start-up Image], then press the m
button.
● Press the qrbuttons to choose [2], then
press the mbutton.
● Drag horizontally across the screen to choose
an image.
● You can also press the qrbuttons or turn the
Âdial to choose an image.
● Press the qrbuttons or turn the Âdial to
choose [OK], then press the mbutton to
complete registration.
Register images or sounds saved on a computer
You can register images or sounds to the camera using the included software.
Refer to the Software Guide for details.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
Using Household Power
If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Insert the coupler.
coupler as shown until it locks into place
with a click.
Plug the cord into the coupler.
● Open the cover and fully insert the plug
into the coupler.
Connect the power cord.
● Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
●
After you finish, turn off the camera and
unplug the power cord from the power outlet.
Do not unplug the plug and power cord with the camera turned on. This
could erase images you have taken or damage the camera.
The AC adapter kit can also be used when abroad
The AC adapter kit can be used in regions that have 100 – 240 V (50/60 Hz) AC
power. If the plug does not fit the outlet, use a commercially available plug
adapter. Do not use devices such as electrical transformers for foreign travel
because they will cause malfunctions.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Troubleshooting
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the ON/OFF button, but nothing happened.
• If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
• Battery performance decreases at low temperatures. Warm the battery by
placing it, for example, in your pocket with the terminal cover on.
Lens will not retract.
• Do not open the memory card/battery cover while the power is on. After closing
TV output
Shooting
Cannot shoot.
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
• When the camera is subjected to powerful light sources, the display may
darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear on
the screen. This may not be very noticeable if using exposure compensation
(p. 100) when shooting a movie.
happears on the screen and the shot cannot be taken even though the
• Attach the camera to a tripod.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
Troubleshooting
Image is blurred.
• Press the shutter button halfway to focus on the subject, then press fully to
• Confirm that functions which you do not intend to use (macro, etc.) are not set.
Even when you press the shutter button halfway, the AF frame does
not appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the
shutter button halfway, or repeatedly push the shutter button halfway, the frame
will appear and the camera will focus.
Subject is too dark.
Subject is too bright (overexposed).
• Reduce the light illuminating the subject.
Image taken using the flash is too bright (overexposed).
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Depending on the Shooting mode, when shooting in a high ISO speed the image
the camera is reducing red-eye, it is not possible to shoot. It is more effective if
the subject is looking directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to the subject.
Recording images to the memory card takes a long time, or continuous
shooting slows down.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
Troubleshooting
When you can’t make settings for shooting functions or FUNC. menu.
• The items in which settings can be made differ depending on the shooting
Shooting movies
Correct shooting time does not display, or stops.
recording at high speeds. Even when the shooting time does not display
appeared on the LCD monitor, and shooting ended automatically.
The camera’s internal memory was insufficient. Try one of the following.
Zoom does not operate.
Playback
Cannot play back images or movies.
• If the file name or folder structure is changed on a computer, you may not be
able to play back images or movies. Refer to the Software Guide for information
regarding folder structure or file names.
Playback stops, or audio cuts out.
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• Depending on its capabilities, the computer may drop frames, or the audio may
cut out, when playing movies.
Touch operations do not work as expected.
• Since the camera uses a pressure sensitive touch panel, try touching the screen
appears in the upper right of the screen.
• Your finger is touching the upper right part of the screen. Take your finger off the
screen.
Computer
Cannot transfer images to a computer.
The problem may be solved by performing the following operations to slow down
transfer speed when the camera is connected to a computer by a cable.
• Disconnect the cable, press and hold down the nbutton, then press the o
and mbuttons simultaneously. Choose [B] when it appears on the screen, then
press the mbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
153
List of Messages that Appear on the Screen
If error messages appear on the LCD monitor, try one of the following solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “LOCK”.
Cannot record!
• You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
Memory card error (p. 52)
• Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Touch AF unavailable
finger off the screen, then use Touch AF.
Touch AF canceled
• The camera could no longer recognize the subject you selected using Touch AF
Memory card full
Change the battery pack. (p. 18)
No Image.
• There are no images recorded on the memory card that can be displayed.
Protected! (p. 117)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot register
this image!/Cannot modify/Cannot assign to category
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
List of Messages that Appear on the Screen
Cannot select!
a starting image that was after the last image or you tried to choose an ending
image that was before the starting image.
123).
Too many marks.
• You chose more than 998 images in print settings. Choose less than 998
Cannot complete!
• Print settings could not be saved correctly. Reduce the number of selected
Naming error!
• The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
52).
Communication error
• Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1,000) stored on the memory card. Use a
commercially available USB card reader to transfer the images. Insert the
memory card into the printer's card slot to print.
Lens error, restart camera
• A lens error was detected. Press the ON/OFF button to turn the camera off and
Customer Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• A camera error was detected. Press the ON/OFF button to turn the camera off
• If an error code appears directly after taking a picture, the shot may not have
been recorded. Check image in Playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
Please tilt camera gently!
• The image did not switch because you tilted the camera too strongly. Gently tilt
Download from Www.Somanuals.com. All Manuals Search And Download.
155
Functions Available in Each Shooting Mode
4
Shooting modes
A
Function
G I F V
{
—
*1
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
*2
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
{
—
{
—
—
{
{
{
{
—
—
{
{
{
{
h
{
—
{
—
—
—
{
{
{
{
—
—
{
{
{
{
!
All Range
e
u
ÒÎ
"
$
*3
AF Lock (p. 84)
Touch AF (p. 86)
TV Display (p. 79)
On
Information Display (p. 44)
Off
FUNC. Menu
{
{
{
{
{
{
Light Metering (p. 87)
—
—
—
—
My Colors (p. 77)
—
{
—
—
—
{
—
{
—
{
—
{
{
{
{
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
—
{
—
{
{
White Balance (p. 75)
ISO Speed (p. 74)
Drive Mode (p. 76)
W
Compression Ratio (Image Quality)
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
*1 Set automatically. *2 Not selectable, but turned on whenever flash is used.
*3 Possible settings: 0 – 30 seconds in [Delay], and 1 – 10 shots in [Shots].
*4 FE lock not available.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
Functions Available in Each Shooting Mode
4
E
H U
t
—
—
—
{
{
—
{
—
—
{
{
—
{
—
—
—
{
{
{
≈ w y O P Z R TY L X >z
{
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
*2
{
{
—
{
—
—
{
{
{
{
—
—
{
{
{
{
—
{
*2
{
—
—
{
{
{
{
{
{
{
—
—
{
{
{
—
—
{
*2
{
—
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
—
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
—
—
{
{
{
{
—
—
—
{
—
—
{
{
{
{
{
{
{
—
—
{
{
{
{
—
—
—
{
{
—
—
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
{
{
{
{
{
—
—
—
—
{
{
{
—
—
{
{
{
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
—
—
—
—
{
—
{
{
{
{
{
—
—
{
*4
—
{
{
{
—
—
—
—
—
—
{
{
{
{
{
—
—
—
—
—
{
{
—
FUNC. Menu
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
—
—
—
—
{
—
{
{
—
{
—
{
—
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
{
—
{
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
—
{
—
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
—
{
—
{
{
{
—
—
—
{
—
{
—
—
—
—
*5
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
*6 *7
{
*7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
. *7
is not selectable.
{ Selectable, or set automatically. — Not selectable
Download from Www.Somanuals.com. All Manuals Search And Download.
157
Menus
4Shooting Menu
4
Shooting modes
A
Function
G I F V
Face AiAF
Fixed frame
{
—
—
{
{
{
*3
{
{
{
*5
{
{
{
{
{
*5
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
AF Frame (p. 82)
AF Frame Size (p. 82)
Normal/Small
Standard/Off
Digital Tele-converter (1.5x/2.0x)
On/Off
AF-Point Zoom (p. 83)
Servo AF (p. 85)
On/Off
Red-Eye Corr.
On/Off
Red-Eye Lamp On/Off
Auto/Off
Flash Settings
i-Contrast (p. 90)
Review (p. 144)
Off/2 – 10 sec./Hold
Off/Detailed/Focus Check
On/Off
Review Info (p. 144)
Blink Detection (p. 91)
Off/Grid Lines
Disp. Overlay (p. 145)
IS Mode (p. 145)
3:2 Guide/Both
Continuous/Off
Shoot Only/Panning
Off/Date/Date & Time
On/Off
Date Stamp (p. 62)
Vert. Shutter (p. 80)
*1 AiAF
*2 AF frame not displayed.
*3 [On] when movement is detected or when using Touch AF.
*4 Unavailable when set to
*5 Always [On].
.
*6 Available when his chosen.
*7 Always [Continuous].
Download from Www.Somanuals.com. All Manuals Search And Download.
158
Menus
4
E
H U
t
—
*2
≈ w y O P Z R TY L X >z
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
—
*7
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
*6
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
—
—
—
{
{
—
{
{
{
{
—
{
{
{
—
*5
—
—
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
—
{
—
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
—
{
—
{
—
—
—
—
{
{
—
—
*1
—
—
{
—
—
—
{
—
—
—
—
—
—
{
—
{
—
—
—
*1
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
{
—
—
—
—
{
{
—
—
—
—
—
—
{
{
—
{
{
{
{
{
{
{ Selectable, or set automatically. — Not selectable
Download from Www.Somanuals.com. All Manuals Search And Download.
159
Menus
3Set up Menu
Item
Options/Summary
Ref. Page
Mute
On/Off*
Volume
Set all operation sounds (5 levels).
Set the sounds for each camera operation.
On*/Off
Sound Options
Hints & Tips
LCD Brightness
Start-up Image
Format
Set within a range of ±2.
Add an image as start-up image.
Formats memory card, erasing all data
Continuous*/Auto Reset
Monthly*/Daily
File Numbering
Create Folder
Lens Retract
Power Saving
1 min.*/0 sec.
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
Time Zone
Date/Time
Home/World
Date and time settings
NTSC/PAL
Video System
Calibration
Language
Calibrates the touch panel.
Choose display language.
Returns camera to default settings.
Reset All
* Default setting
Download from Www.Somanuals.com. All Manuals Search And Download.
160
Menus
1Playback Menu
Item
Options/Summary
Ref. Page
Slideshow
Erase
Plays back images automatically.
Erases images.
Protect
Protects images.
Rotate
Rotates images.
Favorites
My Category
i-Contrast
Tags or untags images as favorites.
Categorizes images.
Corrects dark portions and contrast in still
images.
Red-Eye Correction
Trimming
Corrects red eyes in still images.
Trims portions of still images.
Resizes and saves still images.
Adjusts colors in still images.
On*/Off
Resize
My Colors
Active Display
Scroll Display
Resume
On*/Off
Last seen*/Last shot
Transition
Fade*/Scroll/Slide/Off
Set Touch Actions
* Default setting
Register a playback function to a drag pattern.
2Print Menu
Item
Options/Summary
Displays printing screen.
Ref. Page
Print
Select Images & Qty.
Select Range
Chooses individual images for printing.
Chooses starting and ending images for printing.
Chooses all images for printing.
Cancels all settings for printing.
Sets the printing style.
Select All Images
Clear All Selections
Print Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
161
Handling Precautions
• This camera is a high-precision electronic device. Do not drop it or subject
it to strong impacts.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen onto, or dirt is stuck on the camera or LCD
monitor, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply
force.
• Never use cleaners containing organic solvents to wipe the camera or
LCD monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon Customer Support Help Desk
as listed in your Warranty System Booklet.
• When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or external surfaces of the camera.
To avoid condensation, put the camera in an airtight, resealable plastic
bag and let it adjust to temperature changes slowly before removing it
from the bag.
• If condensation has formed, stop using the camera immediately.
Continued use may damage the camera. Remove the battery and
memory card, and wait until the moisture has completely evaporated
before resuming use.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Specifications
Camera Effective Pixels. . . . . . . . . . .Approx. 12.1 million
Image Sensor . . . . . . . . . . . . . . . . . .1/2.3-inch type CCD (Total number of pixels:
Approx. 12.4 million)
Lens. . . . . . . . . . . . . . . . . . . . . . . . . .4.3 (W) – 21.5 (T) mm
35mm film equivalent: 24 (W) – 120 (T) mm
f/2.8 (W) – f/5.9 (T)
Digital Zoom. . . . . . . . . . . . . . . . . . . .Approx. 4.0x (Up to approx. 20x in combination
with the optical zoom)
LCD Monitor. . . . . . . . . . . . . . . . . . . .3.0-inch type TFT LCD color monitor
(Touch panel)
Approx. 230,000 dots, Picture coverage 100%
AF Frame Mode. . . . . . . . . . . . . . . . .Face AiAF/Fixed frame
Servo AF . . . . . . . . . . . . . . . . . . . . . .On/Off
Focusing Range (from end of lens) . .Auto: 5 cm (2.0 in.) – infinity (W)/
90 cm (3.0 ft.) – infinity (T)
Normal: 50 cm (1.6 ft.) – infinity (W)/
90 cm (3.0 ft.) – infinity (T)
Macro: 5 – 50 cm (2.0 in. – 1.6 ft.) (W)
Infinity: 3 m (9.8 ft.) – infinity
Digital Macro: 5 – 10 cm (2.0 – 3.9 in.)
Kids&Pets: 1 m (3.3 ft.) – infinity
Shutter . . . . . . . . . . . . . . . . . . . . . . . .Mechanical shutter and electronic shutter
Shutter Speed . . . . . . . . . . . . . . . . . .1 – 1/3000 sec.
15 – 1/3000 sec. (Total shutter speed range)
Image Stabilization . . . . . . . . . . . . . .Lens-shift type
Metering System . . . . . . . . . . . . . . . .Evaluative, Center-weighted average or Spot
Exposure Compensation . . . . . . . . . .±2 stops in 1/3-stop increments
ISO speed . . . . . . . . . . . . . . . . . . . . .Auto/ISO 80/100/200/400/800/1600
(Standard Output Sensitivity,
Recommended Exposure Index)
White Balance . . . . . . . . . . . . . . . . . .Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Built-in Flash . . . . . . . . . . . . . . . . . . .Auto, On, Slow Synchro, Off
* Red-eye reduction/Red-eye correction/FE Lock
settings available
Built-in Flash Range . . . . . . . . . . . . .50 cm – 3.5 m (1.6 – 11 ft.) (W)/
90 cm – 1.5 m (3.0 – 4.9 ft.) (T)
Shooting Modes. . . . . . . . . . . . . . . . .Shooting Mode: Auto, P, Portrait, Night Snapshot,
Kids & Pets, Indoor, Sunset, Creative Light Effect,
Fireworks, Long Shutter, Beach, Aquarium,
Foliage, Snow, ISO 3200, Digital Macro, Color
Accent, Color Swap, Stitch Assist, Movie
Movie Mode: Standard, Color Accent, Color Swap
Continuous Shooting . . . . . . . . . . . . .Approx. 0.8 images/sec.
Self-timer . . . . . . . . . . . . . . . . . . . . . .Approx. 10-sec./Approx. 2-sec. delay, FaceSelf-
Timer, Custom Timer
i-Contrast . . . . . . . . . . . . . . . . . . . . . .Auto/Off
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Specifications
Recording Media . . . . . . . . . . . . . . . .SD memory card, SDHC memory card,
MultiMediaCard, MMCplus memory card,
HC MMCplus memory card
File Format. . . . . . . . . . . . . . . . . . . . .Design rule for Camera File system and DPOF
compliant
Data Type . . . . . . . . . . . . . . . . . . . . .Still images: Exif 2.2 (JPEG)
Movies: MOV (Image data: H.264, Audio data:
Linear PCM) (Mono)
Compression . . . . . . . . . . . . . . . . . . .Fine, Normal
Number of Recording Pixels
(Still images) . . . . . . . . . . . . . . . . . . .Large: 4000 x 3000 pixels
Medium 1: 3264 x 2448 pixels
Medium 2: 2592 x 1944 pixels
Medium 3: 1600 x 1200 pixels
Small: 640 x 480 pixels
Widescreen: 4000 x 2248 pixels
(Movies) . . . . . . . . . . . . . . . . . . . . . . .1280 x 720 pixels (30 frames/sec.)
640 x 480 pixels (30 frames/sec.)
320 x 240 pixels (30 frames/sec.)
Number of Possible Shots . . . . . . . . .Approx. 240 images (Based on CIPA standardized
measurement)
Audio . . . . . . . . . . . . . . . . . . . . . . . . .Quantization: 16 bit
Sampling Rate: 44.100 kHz
Playback Function . . . . . . . . . . . . . . .Single Image, Movie, Magnified Focus, Index,
Magnified, Filtered Playback, Slideshow, Active
Display, Scroll Display, Favorites, Touch Actions
Editing Function . . . . . . . . . . . . . . . . .Erase, Protect, My Category, Resize, My Colors,
i-Contrast, Trimming, Rotate, Red-Eye Correction
Direct Print Type . . . . . . . . . . . . . . . .PictBridge capable
Interface. . . . . . . . . . . . . . . . . . . . . . .Hi-Speed USB (Dedicated connector with unified
type of digital, audio and video*)
HDMI (HDMI Mini Connector)
* mini-B compatible
Video/Audio output (NTSC and PAL capable,
mono audio)
Communication Settings . . . . . . . . . .MTP, PTP
Power. . . . . . . . . . . . . . . . . . . . . . . . .Battery Pack NB-6L (rechargeable lithium-ion
battery)
AC adapter kit ACK-DC40
Operating Temperatures . . . . . . . . . .0 – 40 °C (32 – 104 °F)
Operating Humidity . . . . . . . . . . . . . .10 – 90%
Dimensions (excluding protrusions). .99.9 x 53.4 x 22.9 mm (3.93 x 2.10 x 0.90 in.)
Weight (camera body only) . . . . . . . .Approx. 130 g (4.59 oz.)
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Specifications
Battery Pack NB-6L
Type. . . . . . . . . . . . . . . . . . . . . . . . . .Rechargeable lithium-ion battery
Voltage. . . . . . . . . . . . . . . . . . . . . . . .3.7 V DC
Capacity. . . . . . . . . . . . . . . . . . . . . . .1000 mAh
Charging cycles . . . . . . . . . . . . . . . . .Approx. 300 times
Operating temperature. . . . . . . . . . . .0 – 40 °C (32 – 104 °F)
Dimensions . . . . . . . . . . . . . . . . . . . .34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . .Approx. 21 g (0.74 oz.)
Battery Charger CB-2LY/CB-2LYE
Rated input . . . . . . . . . . . . . . . . . . . .100 – 240 V AC (50/60 Hz), 0.085 A (100 V) –
0.05 A (240 V)
Rated output . . . . . . . . . . . . . . . . . . .4.2 V DC, 0.7 A
Charge time . . . . . . . . . . . . . . . . . . . .Approx. 1 hour 55 min.
Operating temperature. . . . . . . . . . . .0 – 40 °C (32 – 104 °F)
Dimensions . . . . . . . . . . . . . . . . . . . .58.6 x 86.4 x 24.1 mm (2.31 × 3.40 × 0.95 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . .Approx. 70 g (2.47 oz.) (CB-2LY)
Approx. 61 g (2.15 oz.) (CB-2LYE) (excluding
power cord)
• All data is based on tests by Canon.
•
Camera specifications or appearance are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
Index
Deleting J Erasing Images
Numerics
A
AF Frame .................................................. 25
Aquarium (Scene Mode) ........................... 58
E
Editing
Equipment
Exposure
B
Battery
Charge Indicator .................................... 17
Recharge ............................................... 16
Beach (Scene Mode)................................. 57
Black and White Images............................ 77
C
Clock Function........................................... 54
Components Guide ................................... 42
Compression J Image Quality
F
Factory Settings J Default Settings
Flash
D
Date and Time
Adding to Image..................................... 62
Changing................................................ 20
World Clock.......................................... 141
Date/Time J Date and Time
Download from Www.Somanuals.com. All Manuals Search And Download.
166
Index
Focus
L
Format J Memory Cards, Formatting
LCD monitor J Screen
M
Macro.........................................................70
Available Shots ......................................19
Menu
Basic Operations....................................48
List........................................................158
Metering Mode...........................................87
MMCplus/HC MMCplus Memory Card ......19
Movies
FUNC. Menu
Image Quality (Frame Rate)...................99
Mode ......................................................98
Recording Pixels ....................................99
MultiMediaCard J Memory Cards
Mute...........................................................49
My Category ............................................122
G
H
I
Images
N
Night Snapshot (Scene Mode) ..................57
Editing J Editing
Playback J Viewing
O
ON/OFF Button..........................................43
P
Panoramic Photos .....................................96
Personal Printing Guide...............................2
PictBridge ..................................................29
Playback J Viewing
Portrait (Scene Mode) ...............................56
Postcard Size ............................................73
Power J Battery
K
Download from Www.Somanuals.com. All Manuals Search And Download.
167
Index
Print Settings (DPOF).............................. 132
Program AE............................................... 68
T
TV
R
Red-Eye
Correction ............................................ 131
Resizing (Making Images Smaller).......... 126
S
V
Screen
Display Language .................................. 21
Information Displayed ............................ 44
SD/SDHC Memory Card ........................... 19
Self-Timer
Video J Movies
Viewing (Playback)
10 second Self-Timer............................. 63
Changing Delay and
Face Self-Timer ..................................... 64
Two Second Self-Timer ......................... 78
Servo AF ................................................... 85
Shooting Date and Time J Date and Time
Shooting Using a TV ................................. 79
Shutter Button ........................................... 23
Slow Synchro J Flash
W
Wrist Strap J Strap
Z
Snow (Scene Mode).................................. 58
Software
Sound Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
168
Trademark Acknowledgments
•
•
The SDHC logo is a trademark.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Disclaimer
•
•
•
•
Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
Canon reserves the right to change the contents of this guide at any
time without prior notice.
Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors
or omissions, please contact the Canon customer service center
indicated on the customer support list included with the product.
•
The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
CEL-SN5FA210
© CANON INC. 2009
Download from Www.Somanuals.com. All Manuals Search And Download.
|