PEUBn.DgIMli-s73h5
English
Français
Español
InstDriugictatl iVoidneoMCaamncourdaelr
Caméscope numérique
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Digital
Video
Mini
Cassette
NTSC
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word “product”
refers to the Canon Digital Video Camcorder
ZR500 A and all its accessories.
10. Power Sources — The CA-570 Compact
Power Adapter should be operated only
from the type of power source indicated
on the marking label. If you are not sure of
the type of power supply to your home,
consult your product dealer or local power
company. Regarding other power sources
such as battery power, refer to instructions
in this manual.
11. Polarization — The CA-570 Compact
Power Adapter is equipped with a
polarized 2-prong plug (a plug having one
blade wider than the other).
E
1. Read Instructions — All the safety and
operating instructions should be read
before the product is operated.
2. Retain Instructions — The safety and
operating instructions should be retained
for future reference.
3. Heed Warnings — All warnings on the
product and in the operating instructions
should be adhered to.
4. Follow Instructions — All operating and
maintenance instructions should be
followed.
5. Cleaning — Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as recommended
in this manual.
6. Accessories — Do not use accessories
not recommended in this manual as they
may be hazardous.
7. Avoid magnetic or electric fields — Do not
use the camera close to TV transmitters,
portable communication devices or other
sources of electric or magnetic radiation.
They may cause picture interference, or
permanently damage the camera.
8. Water and Moisture — Hazard of electric
shock — Do not use this product near
water or in rainy/moist situations.
The 2-prong polarized plug will fit into the
power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug still fails to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection — Power cords
should be routed so that they are not likely
to be walked on or pinched by items
placed upon or against them. Pay
particular attention to plugs and the point
from which the cords exit the product.
13. Outdoor Antenna Grounding — If an
outside antenna is connected to the
product, be sure the antenna is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical
Code, ANSI / NFPA No. 70—1984,
provides information with respect to
proper grounding of the mast and
9. Placing or Moving — Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the
supporting structure, grounding of the
lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See figure 1.
product.
A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces may
cause the product and cart
combination to overturn.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
18.Damage Requiring Service — Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
damaged.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Fig. 1
ANTENNA LEAD
IN WIRE
GROUND
LAMP
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to rain
or water.
d. If the product does not operate
normally even if you follow the
operating instructions. Adjust only
those controls that are covered by the
operation instructions. Improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified technician
to restore the product to its normal
operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates
a need for service.
19.Replacement Parts — When replacement
parts are required, be sure the service
technician has used replacement parts
that are specified by Canon or that have
the same characteristics as the original
part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
20.Safety Check — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is in
safe operating order.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE
SYSTEM
(NEC ART 250 PART H)
NEC - NATIONAL ELECTRICAL CODE
14.Lightning — For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, disconnect it from the wall
outlet and disconnect the antenna. This
will prevent damage to the product due to
lightning and power-line surges.
15.Overloading — Do not overload wall
outlets and extension cords as this can
result in a risk of fire or electric shock.
16.Objects and Liquid Entry — Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Be careful not to spill liquid of any kind
onto the product.
17.Servicing — Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.
When replacement of power supply is required, please return it to the responsible
nearest Canon Service Center and please replace it with the same type number CA-
570.
The Adapter can be used with a power supply between 100 and 240 V AC. For areas
where 120 V AC power is not used, you will need a special plug adapter. Contact your
nearest Canon Service Center for further information.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using this Manual
Thank you for purchasing the Canon ZR500. Please read this manual carefully before
you use the camcorder and retain it for future reference. Should your camcorder fail to
operate correctly, refer to the Troubleshooting table (
E
75).
Change the display language before you begin ( 59).
Symbols and References Used in This Manual
: Precautions related to the camcorder operation.
: Additional topics that complement the basic operating procedures.
: Reference page number.
Capital letters are used to refer to buttons on the camcorder.
[ ] are used to refer to menu items displayed on the screen.
“Screen” refers to the LCD and the viewfinder screen.
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you
have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
Operating modes (see below)
MENU
Menu item shown at its default
position
DATE/TIME SETUP
T.ZONE/DST NEW YORK
(
34)
1. Press the FUNC. button to open the FUNC. menu.
The FUNC. menu will open. Continue the procedure with the
multi selector to open the setup menus.
Buttons and switches to be operated
2. With the multi selector select
press ( ).
(
)
the
icon and
3. Select (
press ( ). Then, select (
option and press ( ).
The time zone setting appears (see table on the next page) The default setting is New
) the [DATE/TIME SETUP] menu and
) the [T.ZONE/DST]
About the Joystick and the Joystick Guide
The mini joystick allows you to control many of the camcorder’s operations and to select
and change setting options in menus.
Push the joystick up, down, left or right (
item or change settings.
,
) to select an
Press the joystick itself (
action.
) to save the settings or confirm an
The functions assigned to the joystick change according to the operation mode. You can
display the joystick guide to remind you of the joystick’s functions in each operating mode.
Recording:
Playback:
EXP
FOCUS
Download from Www.Somanuals.com. All Manuals Search And Download.
5
About the Operating Modes
The operating modes are determined by the position of the
switch.
Operating
Modes
Icon
Display
Operation
Switch
Recording movies on a
tape
CAMERA
20
27
Playing movies from a
tape
PLAY
: Function can be used in this mode.
: Function cannot be used in this mode.
Trademark Acknowledgments
•
is a trademark.
®
• Windows is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
• Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the United
States and other countries.
• Other names and products not mentioned above may be registered trademarks or trademarks
of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of contents
Introduction
E
Using this Manual............................................................................................5
Checking the Supplied Accessories ................................................................9
Components Guide........................................................................................10
Basic Functions
Preparations
Preparing the Power Supply..........................................................................12
Loading/Unloading a Cassette ......................................................................15
Preparing the Camcorder ..............................................................................16
Adjusting the LCD Screen .............................................................................17
Setting the Time Zone, Date and Time..........................................................18
Recording
Recording Movies on a Tape.........................................................................20
Zooming.........................................................................................................24
Tips for Making Better Videos........................................................................26
Playback
Playing Back a Tape......................................................................................27
Adjusting the Volume.....................................................................................29
Playing Back on a TV Screen........................................................................30
Advanced Functions
Menus and Settings.......................................................................................33
Recording
Using the Recording Programs .....................................................................36
Adjusting the Exposure Manually ..................................................................40
Adjusting the Focus Manually........................................................................41
Setting the White Balance .............................................................................43
Selecting an Image Effect..............................................................................44
Setting the Shutter Speed..............................................................................45
Using the Self-Timer......................................................................................47
Changing the Recording Mode (SP/LP) ........................................................48
Audio Recording............................................................................................49
Using Digital Effects.......................................................................................51
Widescreen TV Recording (16:9) ..................................................................54
Playback
Magnifying the Image ....................................................................................55
Displaying the Data Code..............................................................................56
End Search....................................................................................................57
Playing Back a Tape with Added Sound........................................................58
Other Functions
Changing the Display Language ...................................................................59
Other Camcorder Settings.............................................................................60
Editing
Recording to a VCR or Digital Video Device .................................................63
Recording from Digital Video Devices (DV Dubbing) ....................................65
Transferring Video Recordings to a Computer ..............................................66
Additional Information
Screen Displays.............................................................................................67
Download from Www.Somanuals.com. All Manuals Search And Download.
7
List of Messages............................................................................................69
Maintenance/Others ......................................................................................70
Troubleshooting.............................................................................................75
System Diagram............................................................................................78
Optional Accessories.....................................................................................79
Specifications.................................................................................................81
Item Codes ....................................................................................................83
Index..............................................................................................................84
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Checking the Supplied Accessories
CA-570 Compact
Power Adapter
(incl. power cord)
BP-2L5 Battery Pack
Lithium Button Battery
CR1616
STV-250N Stereo
Video Cable
E
The serial number of this product can be found at the battery attachment unit of the
camcorder. Write down the number and other information here and retain this book as a
permanent record of your purchase to aid identification in case of theft.
Date of Purchase:
Purchased From:
Dealer Address:
Dealer Phone No.:
Model Name: ZR500 A
Serial No.:
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS.
Hg
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Components Guide
ZR500
Left side view
Right side view
Lens cover switch (
open, closed)
LCD BACKLIGHT button (
Speaker ( 29)
20)
MIC (microphone) terminal (
50)
(
DV terminal (
Zoom lever (
63, 65)
24)
17)
Program selector (
Easy recording
Recording programs
36)
CHARGE indicator (
Terminal cover
switch (
12)
6)
Grip belt (
AV terminal (
16)
30)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Front view
Rear view
E
Bottom view
Stereo microphone
Backup battery compartment (
Start/stop button ( 20)
14)
15)
Viewfinder (
Dioptric adjustment lever (
BATT. (battery release) button (
16)
16)
Battery attachment unit (
Serial number
12) /
12)
LCD screen (
Joystick (
17)
DC IN terminal (
12)
5)
Cassette compartment (
15)
FUNC. button (
33)
Cassette compartment cover (
D.EFFECTS button (
WIDE SCR button (
DATA CODE button (
51)
54) /
56)
OPEN/EJECT
Tripod socket (
switch (
26)
15)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Basic Functions
Preparations
Preparing the Power Supply
Attaching the Battery Pack
1. Turn the
switch to
.
2. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the battery
pack.
• Press lightly and slide the battery pack in
the direction of the arrow until it clicks.
Charging the Battery Pack
1. Connect the power cord to the
CHARGE indicator
adapter.
2. Plug the power cord into a power
outlet.
3. Connect the power adapter to the
camcorder’s DC IN terminal.
The CHARGE indicator starts flashing.
The indicator will stay on when the
charging is completed.
DC IN terminal
4. When the charging is completed,
disconnect the power adapter
from the camcorder. Unplug the
power cord from the power outlet
and disconnect it from the adapter.
5. Remove the battery pack after use.
Press the BATT. button to remove the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Using a Household Power Source
Connect to a household power source to use the camcorder without worrying about the
battery power. You can keep the battery pack attached; the battery power will not be
consumed.
E
1. Turn the
switch to
.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder’s DC IN terminal.
Turn off the camcorder before connecting or disconnecting the power adapter.
If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
Do not connect any products that are not expressly recommended to the
camcorder’s DC IN terminal or to the power adapter.
You may hear some noise from the power adapter during use. This is not a
malfunction.
Do not disconnect and reconnect the power cord while charging a battery pack.
Charging may stop. The battery pack may not be charged correctly even if the
CHARGE indicator is continuously on. The battery pack may also not be
charged correctly when a power outage occurs during charging. Remove the
battery pack and attach it back to the camcorder.
When the power adapter or the battery pack is defective, the CHARGE
indicator flashes rapidly (at about 2 flashes/second) and charging stops.
The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second
More than 50%: Flashes twice every second
100%: Continuously on
We recommend charging the battery pack in temperatures between 10 °C and
30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F
to 104 °F), the charging will not start. If the battery temperature goes outside
this temperature range while charging, the CHARGE indicator will start flashing
rapidly and the charging will stop.
A lithium ion battery pack can be charged at any charge state. Unlike
conventional battery packs, you do not need to completely use or discharge it
before charging.
We recommend that you prepare battery packs 2 to 3 times longer than you
think you might need.
To conserve battery power, turn off the camcorder instead of leaving it in record
pause mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Charging, Recording and Playback Times
The following times are approximate and vary according to the charging,
recording or playback conditions.
Battery Pack
BP-2L5
NB-2L
NB-2LH BP-2L12 BP-2L14
Charging Time
Max. Recording Time
Viewfinder
95 min. 110 min. 125 min. 195 min. 220 min.
90 min. 105 min. 125 min. 220 min. 270 min.
LCD
normal 85 min. 100 min. 120 min. 215 min. 260 min.
bright 80 min. 90 min. 110 min. 200 min. 240 min.
Typical RecordingTime*
Viewfinder
LCD
50 min.
normal 50 min.
bright 45 min.
Playback Time
55 min.
55 min.
50 min.
65 min. 120 min. 150 min.
65 min. 120 min. 145 min.
60 min. 110 min. 140 min.
90 min. 105 min. 125 min. 225 min. 275 min.
* Approximate times for recording with repeated operations such as start/stop,
zooming, power on/off. Actual time may be shorter.
Installing the Backup Battery
The backup battery (lithium button battery CR1616) allows the camcorder to retain the
date, time (
18) and other camcorder settings while the power source is disconnected.
Connect a power source to the camcorder when replacing the backup battery to retain the
settings.
1. Open the backup battery cover.
2. Insert the backup battery with the
+ side facing out.
3. Close the cover.
The backup battery has a life span of about a year. “
you that it needs to be replaced.
” flashes in red to inform
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Loading/Unloading a Cassette
Use only videocassettes marked with the
logo.
E
1. Slide the OPEN/EJECT
and open the cassette
compartment cover.
The cassette compartment opens
automatically.
switch
Tape protection tab
2. Load/unload the cassette.
• Load the cassette with the window
facing the grip belt.
• Unload the cassette by pulling it straight
out.
3. Press the
mark on the
cassette compartment until it
clicks.
4. Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.
Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the
switch is set to
.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Preparing the Camcorder
Adjusting the Viewfinder (Dioptric Adjustment)
1. Turn on the camcorder and keep
the LCD panel closed.
2. Adjust the dioptric adjustment
lever.
Fastening the Grip Belt
Adjust the grip belt so that you can reach the
zoom lever with your index finger, and the
start/stop button with your thumb.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Adjusting the LCD Screen
Rotating the LCD Screen
Open the LCD panel 90 degrees.
• You can rotate the panel by 90 degrees
outward.
E
• You can rotate the panel by 180 degrees
inward.
LCD Backlight
LCD BACKLIGHT button
You can switch the brightness of the LCD screen between normal and bright by pressing
the LCD BACKLIGHT button. This is useful for outdoor recordings.
Press the LCD BACKLIGHT button.
This setting does not affect the brightness of the recording or the viewfinder
screen.
When using a battery pack, the camcorder retains the setting even if you
change the position of the
switch.
The battery usage time shortens when the LCD screen is set brighter (
14).
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you
have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
MENU
DATE/TIME SETUP
T.ZONE/DST NEW YORK
(
33)
1. Press the FUNC. button to open the FUNC. menu.
The FUNC. menu will open. Continue the procedure with the
joystick to open the setup menus.
2. With the joystick select (
).
3. Select (
press ( ). Then, select (
option and press ( ).
) the
icon and press
(
) the [DATE/TIME SETUP] menu and
) the [T.ZONE/DST]
The time zone setting appears (see table on the next page). The default setting is New
York or Singapore depending on the region.
4. Select (
) your time zone and press ( ).
To adjust for daylight saving time, select the time zone with the “ ” next to the area.
Setting the Date and Time
DATE/TIME JAN.1,2006
MENU
DATE/TIME SETUP
12:00AM
(
33)
5. Select (
) the [DATE/TIME] option and press ( ).
A selection frame will be displayed around the date and the
selection arrows around the month will flash.
6. With the joystick change (
) the month as required
and move ( ) to the next field.
• The selection arrows will flash around the next field of the date/time.
• Set the day, year, hours and minutes in the same way.
• If you do not need to change all settings, you can use the joystick to move (
the specific setting you want to change.
) to
7. Press ( ) to start the clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
8. Press the FUNC. button to close the menu.
Time Zones and Difference from GMT/UTC.
E
London
Paris
Cairo
Moscow
Dubai
GMT/UTC Wellington (WELLGTN )
+12
-11
-10
-9
+1
+2
Samoa
Honolulu
+3
Anchorage
+4
Los Angeles (L.A.)
-8
Karachi
Dacca
+5
+6
Denver
Chicago
-7
-6
Bankok
Singapore
Tokyo
Sydney
Solomon
+7
+8
+9
+10
+11
New York
Caracas
Rio de Janeiro (RIO)
Fernando de Noronha (FERNANDO)
Azores
-5
-4
-3
-2
-1
Once you have set time zone, date and time, you do not need to reset the clock
each time you travel to another time zone. Just set the time zone to the one of
your destination, and the camcorder automatically adjusts the clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Recording
Recording Movies on a Tape
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. If necessary,
clean the video heads (
71).
Recording
1. Open the lens cover (move the
lens cover switch down to
).
2. Set the camcorder to
mode.
Set the
switch to CAMERA.
3. Open the LCD panel.
4. Press the start/stop button to
begin recording.
Press the start/stop button again to pause
the recording.
When You Have Finished Recording
1. Turn the
2. Close the LCD panel.
3. Close the lens cover (move the lens cover switch
to ).
switch to
.
4. Unload the cassette.
5. Disconnect the power source.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
When powered by a battery pack, the camcorder shuts off to save power if
left without any operation for 5 minutes. Approximately 30 seconds before
the camcorder shuts off the message “
appear. To continue recording, turn the
back to CAMERA.
E
AUTO POWER OFF” will
switch to and then
Wait until the tape counter stops completely before you start recording.
When you do not remove the cassette, you can record the next scene without
producing any noise or blank sections between the recordings even if you turn
the camcorder off.
Bright light may make it difficult to use the LCD screen. In such case, use the
viewfinder instead.
When recording near loud sounds (such as fireworks, drums or concerts),
sound may become distorted or may be recorded not in the actual sound level.
This is not a malfunction.
Allowing the Subject to Monitor the LCD Screen
You can rotate the LCD panel so that the screen faces in the
same direction as the lens. The viewfinder switches on allowing
you to use the viewfinder while the subject can monitor the
screen.
Displaying the Level Marker
Use the level marker as a horizontal guideline to frame subjects more accurately.
MENU
DISPLAY SETUP/
LEVEL MARKER OFF
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the icon and press ( ).
3. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [LEVEL MARKER] option and press ( ).
select (
4. Set it to [ON] and press ( ) to save the changes.
5. Press the FUNC. button to close the menu.
The level marker will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Reviewing and Searching when Recording
Program selector
Joystick
Record Review
In record pause mode, this function allows you to review the last few seconds of your
recording to check if it has been recorded properly.
1. Set the program selector to
.
2. If the joystick guide does not appear on screen,
press ( ) to display it.
3. Push the joystick ( ) momentarily towards
release it.
and
The camcorder rewinds the tape, plays back the last few
seconds, and returns to record pause mode.
EXP
FOCUS
Record Search
In record pause mode, this function allows you to play back the tape (forward or reverse)
to locate the point where you wish to begin recording.
1. Set the program selector to
.
2. If the joystick guide does not appear on screen,
press ( ) to display it.
3. Hold the joystick pushed ( ) towards
to search
EXP
back towards the beginning of the recording or
pushed ( ) towards
the end of the recording.
to search forward towards
FOCUS
• Release the joystick at the point where you wish to begin recording.
• The camcorder returns to record pause mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
When the camcorder shuts off automatically, the record review and record search
functions will not work. To resume normal operation turn the
and then back to CAMERA.
switch to
E
Screen Displays during Recording
Remaining battery charge
The battery symbol indicates the charge
status of the battery pack.
• “
” starts flashing in red when the
battery pack is empty.
Time Code
Indicates the recording time in hours,
minutes and seconds.
• When you attach an empty battery
pack, the power may turn off without
displaying “
”.
• The actual battery charge may not be
indicated accurately depending on the
conditions under which the battery
pack and the camcorder are used.
Remaining tape
Indicates the remaining time of the tape
in minutes. “
recording. “
” moves during
END” flashes when the
Recording reminder
tape reaches the end.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
When “
” flashes
“
” flashes in red when the lithium
button battery is not installed, or when it
needs replacing.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Zooming
The camcorder is equipped with optical zoom and digital zoom.
Zoom out
Zoom in
Zoom lever
25x Optical Zoom
Move the zoom lever toward W to zoom out (wide-
angle). Move it toward T to zoom in (telephoto).
You can also change the zoom speed (
25).
Keep at least 1 m (3.3 ft.) to the subject. At wide-angle, you can focus on a
subject as close as 1 cm (0.39 in.).
The zoom speed is slightly faster in record pause mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
100x/800x Digital Zoom
When the digital zoom is activated, the camcorder automatically switches between optical
and digital zoom. With digital zoom, image resolution becomes lower the more you zoom in.
E
MENU
CAMERA SETUP
D.ZOOM OFF
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the icon and press
).
3. Select (
). Then, select (
(
) the [CAMERA SETUP] menu and press
) the [D.ZOOM] option and press ( ).
(
4. Select [100x] or [800x] and press ( ) to save the changes.
5. Press the FUNC. button to close the menu.
Digital zoom cannot be used in the
Night recording program.
A zoom indicator appears for 4 seconds. It extends in light blue when the digital
zoom is set to 100x, and extends further in dark blue when set to 800x.
Selecting the Zoom Speed
You can set the zoom speed to variable or to one of 3 levels of fixed zoom speeds. When
set to [VARIABLE], the zoom speed depends on how you activate the zoom lever. Press
softly for a slower zoom or press more strongly for a faster zoom.
MENU
CAMERA SETUP
ZOOM SPEED VARIABLE
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the icon and press
).
3. Select (
). Then, select (
(
) the [CAMERA SETUP] menu and press
) the [ZOOM SPEED] option and press ( ).
(
4. Select a setting option and press ( ) to save the changes.
5. Press the FUNC. button to close the menu.
The fastest zoom speed can be achieved with the [VARIABLE] setting. Among the
fixed zoom speeds [SPEED 3] is the fastest, and [SPEED 1] the slowest.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Tips for Making Better Videos
Holding the Camcorder
For maximum stability, grip the camcorder in your right hand and keep your
right elbow pressed against your body. If necessary, support the camcorder
with your left hand. Be careful that your fingers do not touch the microphone
or lens.
For More Stability
Lean against a wall
Put the camcorder on a table
Kneel on one knee
Lie on your elbow
Use a tripod
Lighting
When recording outdoors, we
recommend recording with the sun at
your back.
When using a tripod, do not leave the viewfinder exposed to direct sunlight as it
may melt (due to concentration of the light by the lens).
Do not use tripods with fastening
Camera positioning pin
screws longer than 5.5 mm (0.2 in.)
as it may damage the camcorder.
The camcorder cannot be mounted
on tripods with fixed (non-retractable)
camera positioning pins.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Playback
Playing Back a Tape
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
E
Cassette or a commercially available digital video head-cleaning cassette (
71).
1. Set the camcorder to
mode.
Set the
switch to PLAY.
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing out.
3. If the joystick guide does not
appear on screen, press ( ) to
display it.
Joystick
4. Push the joystick ( ) towards
to rewind the tape.
5. Push the joystick ( ) towards
/
to play back the tape.
Push ( ) again to pause the playback.
6. Push the joystick ( ) towards
to stop the playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Special Playback Modes
Joystick
/
(Playback Pause)
During normal playback, push the joystick ( ) towards
/
.
(Fast Forward Playback) / (Rewind Playback)
Plays back the tape at 9.5 times normal speed (forward or reverse). During normal
playback, hold the joystick pushed ( ) towards
Release the joystick to return to normal playback.
or pushed ( ) towards
.
There is no sound during special playback.
The picture may become distorted during some special playback modes.
The camcorder stops the tape automatically after 5 minutes in playback pause
to protect the tape and video heads.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Adjusting the Volume
When you use the LCD screen for playback, the camcorder plays back the sound using
the built-in speaker. The sound will be muted when the LCD panel is closed.
E
Speaker
Joystick
MENU
SPEAKER VOLUME
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select (
icon.
) the speaker volume
3. Adjust (
) the volume as required.
4. Press the FUNC. button to save the setting and close
the menu.
If you turn off the volume completely the volume display will change to “ ”.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Playing Back on a TV Screen
Refer also to the TV or VCR instruction manual.
Open the terminal cover
Signal flow
STV-250N Stereo Video Cable
(supplied)
1. Turn off all the devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
We recommend powering the camcorder from a household power source.
TVs with Video ID-1 system: Recordings made in the widescreen mode will be
automatically played back in widescreen mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Selecting the Type of TV
During playback set the [TV TYPE] option according to the TV set to which you connect
the camcorder.
E
MENU
VCR SETUP
TV TYPE WIDE TV
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the icon and press
).
3. Select (
Then, select (
).
(
) the [VCR SETUP] menu and press ( ).
) the [TV TYPE] option and press
(
4. Select a setting option and press ( ) to save the changes.
• WIDE TV: TV sets with 16:9 aspect ratio.
• NORMAL TV: TV sets with 4:3 aspect ratio
5. Press the FUNC. button to close the menu.
Playing back recordings made in the widescreen mode on a normal TV: If the
TV type is set to [NORMAL TV] the recording will be played back in “letterbox”
display. If the TV type is set to [WIDE TV] the image will appear horizontally
squeezed.
If you connect the camcorder to a TV with Video ID-1 system, recordings made
in the widescreen mode will be automatically played back in widescreen mode.
When the TV type is set to [NORMAL TV] the digital effects are not available in
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Selecting the Audio Output Channel
You can select the output channels when playing back a tape with audio recorded on two
channels.
MENU
AUDIO SETUP
OUTPUT CH L/R
(
33)
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the icon and press
).
(
3. Select (
) the [AUDIO SETUP] menu and press
(
). Then, select ( ) the [OUTPUT CH] option and
press ( ).
4. Select (
) a setting option and press ( ) to save the changes.
• L/R: Stereo: L+R channels, Bilingual: Main+Sub.
• L/L: Stereo: L channel, Bilingual: Main.
• R/R: Stereo: R channel, Bilingual: Sub.
5. Press the FUNC. button to close the menu.
The setting resets to the [L/R] setting when you turn the camcorder off.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Advanced Functions
Menus and Settings
The camcorder’s functions and settings are controlled from a series of menus that appear
when you press the FUNC. button. Most basic functions appear on the first menu screen
- the FUNC. menu. For more advanced settings you have to open the setup menus by
E
selecting the
[MENU] option from the FUNC. menu.
Joystick
FUNC. button
Selecting Menus and Settings
FUNC. menu:
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select (
) the icon of the function
you want to change.
3. Select (
) a setting option from the bottom bar.
) or make further selections with the
With some settings, you will need to press (
joystick. In such cases, a joystick icon (next to the bottom bar) or small arrows (around
the setting option) will be displayed as an additional operation guide.
4. Press the FUNC. button to save the setting and close the menu.
Setup menus:
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select (
) the
icon and press ( ).
3. Select (
4. Select (
5. Select (
) a setup menu and press ( ).
) a menu item and press ( ).
) a setting option and press ( ) to save the changes.
6. Press the FUNC. button to close the menu.
Pressing the FUNC. button at any time closes the menu.
Items that are not available appear grayed out.
The menu will not appear when you press the FUNC. button while recording
movies.
You can open the menu directly on the setup menus screen by holding the
FUNC. button pressed for more than 2 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Menu and Default Settings
Default settings are shown in boldface.
* The item will not appear in
mode.
36
Submenu
FUNC. menu
Menu Item
Recording Programs*
Setting Options
PROGRAM AE,
PORTRAIT,
SPORTS,
BEACH,
NIGHT,
SUNSET,
SNOW,
SPOTLIGHT,
FIREWORKS
White Balance
Image Effect
AUTO,
DAYLIGHT,
TUNGSTEN,
VIVID,
43
44
SET
IMAGE EFFECT OFF,
NEUTRAL,
SOFT SKIN DETAIL
Self Timer
Digital Effects
SHUTTR SPEED*
SELF TIMER OFF,
D.EFFECT OFF,
AUTO, 1/60, 1/100, 1/250, 1/500, 1/1000,
1/2000
SELF TIMER ON
47
51
45
FADER,
EFFECT
CAMERA SETUP
A.SL SHUTTER
D.ZOOM
ZOOM SPEED
IMG STAB*
ON, OFF
46
25
25
61
48
49
49
60
67
21
59
62
60
61
21
18
18
59
OFF, 100X, 800X
VARIABLE, SPEED 3, SPEED 2, SPEED 1
ON, OFF
STD PLAY, LONG PLAY
AUTO, OFF
VCR SETUP
AUDIO SETUP
REC MODE
WIND SCREEN*
AUDIO MODE
BRIGHTNESS
TV SCREEN
LEVEL MARKER
LANGUAGE
DEMO MODE
BEEP
16bit, 12bit
DISPLAY SETUP/
ON, OFF
ON, OFF
See list of languages.
ON, OFF
HIGH VOLUME, LOW VOLUME, OFF
ON, OFF
ON, OFF
See list of time zones.
SYSTEM SETUP
START-UP IMG
POWER SAVE
DATE/TIME SETUP T.ZONE/DST
DATE/TIME
-
DATE FORMAT
Y.M.D : 2006.1.1 AM12:00
M.D,Y : JAN.1,2006 12:00AM
D.M.Y : 1.JAN.2006 12:00AM
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Submenu
Menu Item
Speaker Volume
Recording Pause
End Search
Digital Effects
REC MODE
TV TYPE
OUTPUT CH
12bit AUDIO
Setting Options
FUNC. menu
29
65
57
51
48
31
32
58
58
49
60
-
-
E
D.EFFECT OFF,
FADER,
EFFECT
VCR SETUP
STD PLAY, LONG PLAY
NORMAL TV, WIDE TV
L/R, L/L, R/R
AUDIO SETUP
STEREO1, STEREO2, MIX/FIXED, MIX/VAR.
MIX BALANCE
AUDIO MODE
BRIGHTNESS
ST-1
ST-2
16bit, 12bit
DISPLAY SETUP/
TV SCREEN
DISPLAYS
6SEC.DATE
DATA CODE
LANGUAGE
BEEP
ON, OFF
ON, OFF <PLAYBK>
ON, OFF
DATE, TIME, DATE & TIME
See list of languages.
HIGH VOLUME, LOW VOLUME, OFF
ON, OFF
See list of time zones.
-
Y.M.D : 2006.1.1 AM12:00
M.D,Y : JAN.1,2006 12:00AM
D.M.Y : 1.JAN.2006 12:00AM
67
67
56
56
59
60
61
18
18
59
SYSTEM SETUP
START-UP IMG
DATE/TIME SETUP T.ZONE/DST
DATE/TIME
DATE FORMAT
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Recording
Using the Recording Programs
Easy Recording Program
The camcorder adjusts focus, exposure and other settings
automatically, allowing you to just point and shoot.
Recording Programs
Program AE
The camcorder adjusts focus, exposure and other settings
automatically. However, you have the option of adjusting the settings
manually.
Portrait
Use this mode to give accent to your subject by blurring the
background or foreground. The blur effect increases the more you
zoom to telephoto.
Sports
Use this mode to record sports scenes (such as tennis or golf) or
moving objects (such as roller coasters).
Night
Use this mode to record in dimly lit places.
Snow
Use this mode to record in bright ski resorts. It prevents the subject
from being underexposed.
Beach
Use this mode to record on a sunny beach. It prevents the subject
from being underexposed.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Sunset
Use this mode to record sunsets in vibrant colors.
E
Spotlight
Use this mode to record spotlit scenes.
Fireworks
Use this mode to record fireworks.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Program selector
Joystick
Availability of Functions in Each Mode:
Program Selector
Recording Program
Image Stabilizer
Focus
White Balance
Wind Screen
Shutter Speed
(on)
(A)
(A)
(A)
(A)
(A)
Exposure
Adjustment
(A)
Digital Effects
: Available
: Not available A: Auto setting
Selecting the Easy Recording Program
Set the program selector to
” appears.
.
“
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Selecting a Recording Program
E
MENU
PROGRAM AE
(
33)
1. Set the program selector to
.
2. Press the FUNC. button to open the FUNC. menu.
3. With the joystick select (
) the recording
programs icon.
4. Select (
) the recording program from the options
on the bottom bar.
5. Press the FUNC. button to save the setting and close the menu.
The symbol of the recording program selected appears.
Do not change the recording program while recording as the brightness of the
image may change abruptly.
Portrait/Sports mode:
The picture may not appear smooth when played back.
Snow/Beach mode:
- The subject may become overexposed in dark surroundings. Check the
image on the screen.
- The picture may not appear smooth when played back.
Night mode:
- Moving subjects may leave a trailing afterimage.
- Picture quality may not be as good as in other modes.
- White points may appear on the screen.
- Autofocus may not work as well as in other modes. In such case, adjust the
focus manually.
- The digital zoom cannot be used with this recording program.
Fireworks mode:
To avoid camcorder shake, we recommend using a tripod.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Adjusting the Exposure Manually
Adjust the exposure when a backlit subject becomes underexposed, or overexposed due
to bright light.
Program selector
Joystick
1. Set the program selector to
.
2. If the joystick guide does not appear on screen,
press ( ) to display it.
EXP
3. Push the joystick ( ) towards [EXP] to enter the
BACK
exposure lock mode.
[EXP] on the joystick guide will be displayed in light blue and the exposure adjustment
indicator and the neutral value “ 0” appear on the screen.
4. Adjust (
) the brightness of the image as necessary.
To return to the automatic exposure, push the joystick ( ) towards [EXP] once more.
The exposure adjustment indicator will disappear and [EXP] will turn white again.
5. Push the joystick ( ) towards [BACK] to save the exposure setting.
• When you operate the zoom during exposure lock, the brightness of the image may
change.
• The adjustment range depends on the brightness at the time you locked the
exposure.
6. If necessary, press ( ) again to hide the joystick guide.
The manual exposure setting will reset to auto exposure when you turn the
camcorder off or change the recording program.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
E
Subjects with low
contrast or without
vertical lines
Through
dirty or wet
windows
Reflective
surfaces
Fast Moving
Subjects
Night Scenes
Program selector
Zoom lever
Joystick
1. Set the program selector to
2. Adjust the zoom.
.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the
focus.
3. If the joystick guide does not appear on screen,
press ( ) to display it.
BACK
FOCUS
4. Push the joystick ( ) towards [FOCUS] to activate
the manual focus.
[FOCUS] on the joystick guide will be displayed in light blue and “MF” appears on the
screen.
5. Adjust (
• Push the joystick ( ) towards
for a closer focal distance.
) the focus as necessary.
for a farther focal distance or push it ( ) towards
Download from Www.Somanuals.com. All Manuals Search And Download.
41
• To return to autofocus, push the joystick ( ) towards [FOCUS] once more. “MF” will
disappear and [FOCUS] will turn white again.
6. Push the joystick ( ) towards [BACK] to save the focus adjustment.
7. If necessary, press ( ) again to hide the joystick guide.
The manual focus will reset to autofocus when you set the program selector to
.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
1. In the manual focus mode press ( ) to display the joystick guide.
2. Keep the joystick pushed ( ) towards [FOCUS] for more than 2
seconds.
• At first, “MF” will appear on the screen and then it will be replaced by the “
symbol.
”
• In the infinity focus mode: If you operate the zoom or the joystick (
) or if you turn
the camcorder off, the infinity focus will be canceled and the camcorder will return to
manual focus.
3. Push the joystick ( ) towards [BACK] to save the focus adjustment.
4. If necessary, press ( ) again to hide the joystick guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Setting the White Balance
You can use the preset modes to reproduce colors more accurately, or set a custom white
balance to obtain the optimal setting.
E
AUTO
Settings are automatically set by the camcorder.
For recording outdoors on a bright day.
DAYLIGHT
TUNGSTEN
For recording under tungsten and tungsten type (3-wavelength)
fluorescent lighting.
SET
Use the custom white balance setting to make white subjects
appear white under colored lighting.
White sheet or paper
(if you select SET)
Program selector
Zoom lever
Joystick
FUNC. button
MENU
33)
AUTO
(
1. Set the program selector to
2. Press the FUNC. button to open the FUNC. menu.
3. With the joystick select ( ) the white balance icon.
) the white balance setting from the options on the bottom
.
4. Select (
bar.
If you select a white balance setting other than
[SET], continue to directly to step 6.
[SET]:
To set the custom white balance when you select
5. Point the camcorder at a white object, zoom in until it fills the whole
screen and press ( ).
• Keep the camcorder zoomed in at the white object until step 6 is completed.
• The “ ” icon flashes and stops flashing when the adjustment is completed.
6. Press the FUNC. button to save the setting and close the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Use the auto setting for normal outdoor scenes.
When the program selector is set to
[AUTO].
the white balance is preset to
The camcorder retains the custom white balance setting even if you turn it off.
When you have set the custom white balance:
- Depending on the light source, “ ” may keep flashing. The result will still be
better than with the auto setting.
- Reset the white balance when the lighting condition changes.
- Turn off the digital zoom.
Custom white balance may provide better results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps or certain types of fluorescent lights
Selecting an Image Effect
You can record with different color saturation and contrast effects.
IMAGE EFFECT OFF
VIVID
Records with no image enhancing effects.
Emphasizes the contrast and color saturation.
Tones down the contrast and color saturation.
NEUTRAL
SOFT SKIN DETAIL
Softens the details in the skin tone area for a more
complimentary appearance.
MENU
33)
IMAGE EFFECT OFF
(
1. Press the FUNC. button to open the FUNC. menu.
2. With the joystick select ( ) the image effects icon.
3. Select ( ) the image effect from the options on the bottom bar.
4. Press the FUNC. button to save the setting and close the menu.
The image effects cannot be used when the program selector is set to
[SOFT SKIN DETAIL]: To obtain the best effect, use this function when
recording a person in close-up. Note that areas similar to the skin color may
lack in detail.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Setting the Shutter Speed
You can adjust the shutter speed manually to make stable shots of fast moving subjects.
Available shutter speed settings: AUTO, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000
E
MENU
CAMERA SETUP
SHUTTR SPEED AUTO
(
33)
1. Set the program selector to
2. Press the FUNC. button to open the FUNC. menu.
3. With the joystick select ( ) the recording program icon and select
) the [PROGRAM AE] program.
4. With the joystick select ( ) the icon and press ( ).
5. Select ( ) the [CAMERA SETUP] menu and press ( ). Then, select
) the [SHUTTR SPEED] option and press ( ).
6. Select ( ) a setting option and press ( ) to save the changes.
.
(
(
7. Press the FUNC. button to close the menu.
Do not point the camcorder directly at the sun when the shutter speed is set to
1/1000 or higher.
The image may flicker when recording with high shutter speeds.
Recording under fluorescent lights: In the
Easy Recording,
Program AE
or
Night recording programs, the camcorder automatically detects the flicker
of fluorescent lighting and adjusts the shutter speed accordingly. However, if the
screen starts to flicker, select the
the shutter speed to 1/100.
Program AE recording program and set
The shutter speed resets to [AUTO] when you set the program selector to
or when you change the recording program.
Guidelines for Recording with High Shutter Speeds:
- Outdoor sports such as golf or tennis: 1/2000
- Moving objects such as cars or roller coasters: 1/1000, 1/500 or 1/250
- Indoor sports such as basketball: 1/100
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Auto Slow Shutter
In the
Easy Recording mode or when the shutter speed is set to [AUTO] in the
Program AE recording program, the camcorder uses shutter speeds down to 1/30. This
allows you to obtain a brighter recording in places with insufficient lighting. However, you
can set the camcorder not to use a slow shutter speed.
MENU
CAMERA SETUP
A.SL SHUTTER ON
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [CAMERA SETUP] menu and press ( ). Then, select
(
) the [A.SL SHUTTER] option and press ( ).
3. Set (
) it to [OFF] and press ( ) to save the changes, then close
the menu.
When set to [ON], moving subjects may leave a trailing afterimage.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Using the Self-Timer
E
FUNC. button
Start/stop button
MENU
SELF TIMER OFF
(
33)
1. Open the FUNC. menu and select (
) the self timer icon.
2. Set ( ) it to [SELF TIMER ON] and close the menu.
3. Press the start/stop button.
The camcorder starts recording after a 10-second countdown. The countdown
appears on the screen.
To cancel the self timer, select (
) [SELF TIMER OFF] in step 2 above.
Once the countdown has begun, you can also press the start/stop button to
cancel the self-timer.
The self-timer will be canceled when you turn off the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Changing the Recording Mode (SP/LP)
You can choose between SP (standard play) and LP (long play). LP extends the tape
usage by 1.5 times.
MENU
VCR SETUP
REC MODE STD PLAY
(
33)
1. Open the FUNC. menu, select (
2. Select (
the [REC MODE] option and press ( ).
3. Set ( ) it to [STD PLAY] or [LONG PLAY] and press ( ) to save the
changes, then close the menu.
) the
icon and press ( ).
) the [VCR SETUP] menu and press ( ). Then, select (
)
Depending on the nature and usage condition of the tape, picture and sound
recorded in LP mode may be distorted. We recommend using the SP mode
for important recordings.
If you record in both SP and LP modes on the same tape, the playback picture
may become distorted and the time code may not be written correctly.
If you play back a tape that has been recorded in LP mode with another digital
device on this camcorder, or vice versa, picture and sound may become
distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Audio Recording
Changing the Audio Mode
E
You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later with another editing device. Select the 16-bit mode for higher sound quality.
MENU
AUDIO SETUP
AUDIO MODE 12bit
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [AUDIO SETUP] menu and press ( ). Then, select
(
) the [AUDIO MODE] option and press ( ).
3. Set (
) it to [16bit] or [12bit] and press ( ) to save the changes,
then close the menu.
The selected audio mode is displayed for approximately 4 seconds.
Wind Screen
The camcorder reduces the wind noise automatically (only when recording audio with the
built-in microphone). However, you can turn off the wind screen when recording indoors,
or when you want the microphone to be as sensitive as possible.
MENU
AUDIO SETUP
WIND SCREEN AUTO
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [AUDIO SETUP] menu and press ( ). Then, select
(
) the [WIND SCREEN] option and press ( ).
3. Set (
) it to [OFF] and press ( ) to save the changes, then close
the menu.
“
” appears when you turn the wind screen off.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Using an External Microphone
You can connect an external microphone to the MIC terminal. Use commercially available
condenser microphones with their own power supply.
MIC terminal
Open the terminal cover
You can connect almost any stereo microphone equipped with a Ø 3.5 mm plug
but the audio level will be different than with the built-in microphone.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Using Digital Effects
Faders ( 52)
E
Begin or end scenes with a fade to or from black.
Fade Trigger (FADE-T)
Corner Wipe (CORNER)
Flip (FLIP)
Wipe (WIPE)
Jump (JUMP)
Puzzle (PUZZLE)
Beam (BEAM)
Zigzag (ZIGZAG)
Tide (TIDE)
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Effects ( 53)
Add flavor to your recordings.
Black and White
(BLK&WHT)
Sepia (SEPIA)
Art (ART)
Mosaic (MOSAIC)
Wave (WAVE)
Ball (BALL)
Cube (CUBE)
Mirror (MIRROR)
Color Mask (COLOR M.)
Selecting a Fader
In
mode, set the program selector to
.
*
* Not available if the TV type is set to [NORMAL TV].
MENU
D.EFFECT OFF
(
33)
1. Open the FUNC. menu and select (
effects icon.
) the digital
2. Select (
) the [FADER] option and press ( ).
) a setting option, press ( ) and close
3. Select (
the menu.
The symbol of the selected fader will appear on screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
:
4. Fade in: In record pause mode, press the
D.EFFECTS button and begin recording by pressing
the start/stop button.
E
Fade out: During recording, press the D.EFFECTS
button and pause recording by pressing the start/
stop button.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
:
4. Fade in: In playback pause mode, press the
D.EFFECTS button and begin playback by pushing
the joystick ( ) towards
/
.
Fade out: During playback, press the D.EFFECTS
button and pause playback by pushing the joystick
(
) towards
/
.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
Selecting an Effect
In
mode, set the program selector to
.
*
* Not available if the TV type is set to [NORMAL TV].
MENU
D.EFFECT OFF
(
33)
1. Open the FUNC. menu and select (
effects icon.
) the digital
2. Select (
) the [EFFECT] option and press ( ).
) a setting option, press ( ) and close
3. Select (
the menu.
The symbol of the selected effect will appear on screen.
4. Press the D.EFFECTS button.
• The symbol of the selected effect will turn green.
• The effect can be activated/deactivated by pressing the
D.EFFECTS button.
Turn off the digital effect when you do not use it.
The camcorder retains the setting even if you turn it off or change the recording
program.
The image quality may be slightly lower with digital effects.
Digital effects cannot be used in the following cases:
- When the program selector is set to
- During DV dubbing.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Widescreen TV Recording (16:9)
The camcorder uses the full width of the CCD providing high-resolution 16:9 recording.
WIDE SCR button
Press the WIDE SCR button.
• “
” disappears and the picture changes to 4:3 aspect ratio.
• On the LCD screen: Widescreen video will display normally; video in 4:3 aspect ratio
will appear with black side bars.
• On the viewfinder screen: Widescreen video will appear in “letterbox” display; video in
4:3 aspect ratio will display normally.
Playing back recordings made in the widescreen mode on a normal TV: If the
TV type is set to [NORMAL TV] the recording will be played back in “letterbox”
display. If the TV type is set to [WIDE TV] the image will appear horizontally
squeezed (
31).
If you connect the camcorder to a TV with Video ID-1 system, recordings made
in the widescreen mode will be automatically played back in widescreen mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Playback
Magnifying the Image
The playback image can be magnified up to 5 times.
E
Zoom lever
Joystick
1. Move the zoom lever toward T.
• The image is magnified by 2 times.
• A frame appears indicating the position of the magnified area.
• To further enlarge the image, move the zoom lever toward T.
To shrink the image below 2 times magnification, move the
zoom lever toward W.
2. Select (
joystick.
,
) the magnified area with the
To cancel the magnification, move the zoom lever toward W until
the frame disappears.
While the magnification position frame is displayed it will replace the joystick
guide. Cancel the magnification to return to normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Displaying the Data Code
The camcorder maintains a data code containing the recording date and time. You can
select the data code combination and display it during playback.
Joystick
DATA CODE button
FUNC. button
MENU
DISPLAY SETUP/
DATA CODE DATE & TIME
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [DATA CODE] option and press ( ).
select (
3. Select a setting option and press ( ) to save the changes, then close
the menu.
4. To display the data code during playback: Press the DATA CODE
button.
The data code will not display the next time you turn on the camcorder.
Six-Second Auto Date
Date and time appear for 6 seconds when you begin playback, or to indicate that date or
time zone has changed.
MENU
DISPLAY SETUP/
6SEC.DATE OFF
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [6SEC.DATE] option and press ( ).
select (
3. Select a setting option and press ( ) to save the changes, then close
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
End Search
When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
E
Joystick
FUNC. button
In stop mode:
1. Open the FUNC. menu, select (
).
2. Select (
) the end search icon
and press
(
) [EXECUTE] and press ( ) to start the search.
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Operating the joystick (
,
) will cancel the search.
End search cannot be used once you unload the cassette.
End search may not work properly if a blank section exists on the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Playing Back a Tape with Added
Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
MENU
AUDIO SETUP
12bit AUDIO STEREO1
(
33)
1. Open the FUNC. menu, select (
2. Select (
) the [12bit AUDIO] option and press ( ).
) the
icon and press ( ).
) the [AUDIO SETUP] menu and press ( ). Then, select
(
3. Select a setting option and press ( ) to save the changes.
• STEREO1: Plays back the original sound.
• STEREO2: Plays back the added sound.
• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.
• MIX/VAR.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.
• If you select an audio setting other than [MIX/VAR.], close the menu.
To adjust the mix level when you select [MIX/VAR.]:
4. From the [AUDIO SETUP] menu select (
option and press ( ).
) the [MIX BALANCE]
5. Adjust (
) the mix level between ST-1 and ST-2 and press ( ) to
save the changes, then close the menu.
The camcorder resets to [STEREO1] when you turn the camcorder off.
However, the mix balance is memorized by the camcorder.
Audio dubbing cannot be performed with your camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Other Functions
Changing the Display Language
The language used for screen display and menu items can be changed. The available set
of languages varies depending on the region. Follow the procedure below to check which
set of languages are provided with your camcorder.
E
Language Set A
Language Set B
English, German, Spanish, French, Italian, Polish, Russian,
Simplified Chinese, Japanese
English, Simplified Chinese, Traditional Chinese, Korean
MENU
DISPLAY SETUP/
LANGUAGE ENGLISH
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [LANGUAGE] option and press ( ).
select (
3. Select a language and press ( ) to save the changes, then close the
menu.
If you have mistakenly changed the language, follow the
mark next to the
menu item to change the setting.
The display “FUNC.” at the bottom of the screen refers to the button’s name on
the camcorder and will not change when you change the language.
Changing the Date Format
You can select between three date formats. For example, [JAN. 1, 2006], [1. JAN. 2006]
and [2006. 1. 1].
MENU
DATE/TIME SETUP
DATE FORMAT JAN.1,2006
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DATE/TIME SETUP] menu and press ( ). Then,
) the [DATE FORMAT] option and press ( ).
select (
3. Select a setting option and press ( ) to save the changes, then close
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Other Camcorder Settings
Beep
You will hear a beep upon camcorder operations such as power on/off, start/stop, self-
timer countdown, and unusual conditions of the camcorder. If you turn off the beep, all
camcorder sounds will be turned off.
MENU
SYSTEM SETUP
BEEP HIGH VOLUME
(
33)
To turn off the beep:
1. Open the FUNC. menu, select (
2. Select (
)the [BEEP] option and press ( ).
3. Set it to [OFF] and press ( ) to save the changes, then close the menu.
) the
icon and press ( ).
) the [SYSTEM SETUP] menu and press ( ). Then, select
(
Adjusting the Brightness of the LCD Screen
MENU
DISPLAY SETUP/
BRIGHTNESS
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [BRIGHTNESS] option and press ( ).
select (
3. Adjust (
)the brightness level and press ( ) to save the changes,
then close the menu.
Changing the brightness of the LCD screen does not affect that of the viewfinder
or the recordings.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Turning Off the Image Stabilizer
The image stabilizer compensates for camcorder shake even at full telephoto. It tries to
compensate for horizontal movements; therefore, you may decide to turn it off when you
mount the camcorder on a tripod.
E
MENU
CAMERA SETUP
IMG STAB ON
(
33)
1. Open the FUNC. menu, select (
2. Select (
) the [IMG STAB] option and press ( ).
) the
icon and press ( ).
) the [CAMERA SETUP] menu and press ( ). Then, select
(
3. Set it to [OFF] and press ( ) to save the changes, then close the
menu.
“
” disappears.
The image stabilizer cannot be turned off when the program selector is set to
.
The image stabilizer is designed to compensate a normal degree of camcorder
shake.
The image stabilizer might not be as effective when using the
Night
recording program.
Changing the Display of the Start-Up Image
You can set whether the Canon logo will be displayed or not when you turn on the
camcorder.
MENU
SYSTEM SETUP
START-UP IMG ON
(
33)
To turn off the start-up image:
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [SYSTEM SETUP] menu and press ( ). Then, select
(
) the [START-UP IMG] option and press ( ).
3. Set it to [OFF] and press ( ) to save the changes, then close the
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Demonstration Mode
The demonstration mode displays the camcorder’s main features. It starts automatically
when you leave the camcorder turned on (using the power adapter) without loading a
recording media for more than 5 minutes. However, you can set the camcorder not to
start the demonstration mode.
MENU
DISPLAY SETUP/
DEMO MODE ON
(
33)
To deactivate the demonstration mode:
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [DEMO MODE] option and press ( ).
select (
3. Set it to [OFF] and press ( ) to save the changes, then close the
menu.
To cancel the demo mode once it has begun, press any button, turn off the
camcorder or load a recording media.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Editing
Recording to a VCR or Digital Video
Device
E
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
Connecting the Devices
Connecting a VCR
See Playing Back on a TV Screen (
30).
Connecting a Digital Video Device
Refer also to the instruction manual of the digital video device.
Signal flow
Commercially available DV cable
Recording
1. Set the camcorder to
mode and load a recorded cassette.
2. Connected device: Load a blank cassette and set the device to record
pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
We recommend powering the camcorder from a household power source.
When connecting a VCR, the quality of the edited tape will be slightly lower than
that of the original.
When connecting a digital video device:
- If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
- Proper operation cannot be guaranteed for all digital video devices equipped
with a DV terminal. If operation does not work, use the AV terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Recording from Digital Video
Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually
no loss in picture and sound quality.
E
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (
63).
2. Set the camcorder to
mode and load a blank cassette.
3. Connected device: Load the recorded cassette or disc.
4. Open the FUNC. menu, select ( ) the recording
pause icon and press (
5. Select ( ) [EXECUTE] and press ( ).
).
In record pause and during recording, you can check the picture
on the screen.
6. Connected device: Play back the tape or disc.
7. If the joystick guide does not appear on screen,
press ( ) to display it.
8. Push the joystick ( ) towards
you wish to record appears.
• Recording starts.
/
when the scene
• Push the joystick ( ) towards
/
again to pause/resume the recording.
9. Push the joystick ( ) towards
to stop recording.
10.Connected device: Stop playback.
Blank sections may be recorded as anomalous picture.
If the picture does not appear, reconnect the DV cable or turn the camcorder off
and back on again.
You can only record video signals from devices with the
logo from
recordings in SD (standard definition) standard, in SP or LP recording mode.
Note that signals from identically shaped DV (IEEE1394) terminals may be in
different video standards.
We recommend powering the camcorder from a household power source.
Copyright Signal
Certain software tapes are copyright protected. If you attempt to play back such tape,
“COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears and you will not be
able to view the contents of the tape. If you attempt to record from such tape via the DV
terminal, “COPYRIGHT PROTECTED DUBBING RESTRICTED” appears and you will
not be able to record the contents of the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Transferring Video Recordings to a
Computer
Transferring Using a DV Cable
You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or
IEEE1394 capture board. Use the editing software supplied with your computer/capture
board to transfer video recording from tape to computer. Refer to the instruction manual of
the software. A driver is preinstalled on Windows operating systems later than Windows
98 Second Edition and Mac operating systems later than Mac OS 9, and will be installed
automatically.
IEEE1394 (DV) terminal
Commercially available DV cable
6-pin
4-pin
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
If the computer freezes while you have connected the camcorder, disconnect
and reconnect the DV cable. If the problem persists, disconnect the interface
cable, turn off camcorder and computer, turn camcorder and computer back on
and reconnect them.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the instruction manual of the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Additional Information
Screen Displays
E
Hiding the Displays on the LCD Screen
You can hide the displays on the LCD screen to have a clear screen for playback.
MENU
DISPLAY SETUP/
DISPLAYS ON
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [DISPLAYS] option and press ( ).
select (
3. Set it to [OFF <PLAYBK>] and press ( ) to save the changes, then
close the menu.
• Warning messages still appear, and the data code appears if turned on.
• The displays appear while a playback image is magnified or a digital effect is
activated.
• Tape operation displays appear for 2 seconds.
Hiding/Showing the Displays on the TV Screen
When you connect a TV for recording, you can select to hide the camcorder displays on
the TV screen. For playback, you can show the camcorder displays on the TV screen.
MENU
DISPLAY SETUP/
TV SCREEN ON
(
33)
1. Open the FUNC. menu, select (
) the
icon and press ( ).
2. Select (
) the [DISPLAY SETUP/ ] menu and press ( ). Then,
) the [TV SCREEN] option and press ( ).
select (
3. Set it to [ON] or [OFF] and press ( ) to save the changes, then close
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Screen Displays during Recording/Playback
(see also
23)
Self-timer (
47)
Digital effects (
Shutter speed (
Exposure lock (
51)
45)
40)
Recording reminder (
23)
Manual focus (
Image stabilizer (
Recording mode (
Tape operation
41)
61)
48)
Time code (
23)
Remaining tape (
Widescreen mode (
23)
54)
Operating mode (
Exposure adjustment (
Recording program (
6), Zoom (
41)
36)
24),
Wind screen (
Audio mode (
49)
49)
White balance (
Image effects (
43)
44)
Condensation warning (
71)
Level marker (
21)
12 bit audio (
End search (
58)
57)
Tape operation
Joystick guide (
5)
Data code (
56)
: Recording
/
:
: Record
pause
Fast forward
playback/rewind
: Stop
: Eject
playback (
: Playback
pause (
28)
28)
: Playback
: Fast
forward
: Rewind
Download from Www.Somanuals.com. All Manuals Search And Download.
68
List of Messages
Message
SET THE TIME ZONE,
DATE AND TIME
Explanation
E
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
18
CHANGE THE BATTERY Battery pack is exhausted. Replace or charge the battery pack.
PACK
12
74
15
65
71
71
THE TAPE IS SET FOR
Cassette is protected. Replace the cassette or change the
ERASURE PREVENTION position of the protect switch.
REMOVE THE
CASSETTE
Camcorder stopped operating to protect the tape. Unload and
reload the cassette.
CHECK THE INPUT
DV cable is not connected, or the connected digital device is
turned off.
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder.
CONDENSATION HAS
BEEN DETECTED
REMOVE THE
Condensation has been detected in the camcorder. Unload the
cassette.
CASSETTE
TAPE END
Tape reached the end. Rewind the tape or replace the cassette.
You attempted to play back a tape recorded in HD standard.
–
–
INCORRECT TAPE
SPECIFICATION
PLAYBACK IS
RESTRICTED
INPUT SIGNAL NOT
SUPPORTED
HEADS DIRTY, USE
CLEANING CASSETTE
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
COPYRIGHT PROTECTED You attempted to dub a copyright protected tape.
DUBBING RESTRICTED
You attempted to input video signal in HD standard through the
DV terminal.
Video heads are dirty. Clean the video heads.
65
71
65
65
You attempted to play back a copyright protected tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Maintenance/Others
Camcorder Handling Precautions
Do not carry the camcorder by the LCD panel.
Do not leave the camcorder in places subject to high temperatures, such as a sun-
heated car, and high humidity.
Do not use the camcorder near strong electric or magnetic fields such as above TVs,
near plasma TVs or mobile phones.
Do not point the lens or viewfinder at strong light sources. Do not leave the camcorder
pointed at a bright subject.
Do not use the camcorder in dusty or sandy places. Dust or sand getting inside the
cassette or camcorder may cause damage. Dust and sand can also damage the lens.
Attach the lens cap after use.
The camcorder is not waterproof. Water, mud or salt getting inside the cassette or
camcorder may cause damage.
Be careful of heat generated by lighting equipment.
Do not disassemble the camcorder. If the camcorder does not function properly,
consult qualified service personnel.
Handle the camcorder with care. Do not subject the camcorder to shocks or vibration
as this may cause damage.
Avoid sudden changes in temperature. Moving the camcorder rapidly between hot and
cold temperatures may cause condensation to form on its internal surfaces (
71).
Storage
If you do not intend to use the camcorder for a long time, store it in a place free of dust,
in low humidity, and at temperatures not higher than 30 °C (86 °F).
After storage, check the functions of your camcorder to make sure that the camcorder
is still working properly.
Cleaning
Camcorder Body and Lens
Use a soft, dry cloth to clean the camcorder body and lens. Never use chemically
treated cloth or volatile solvents such as paint thinner.
LCD Screen
Clean the LCD screen using a commercially available cleaning cloth for glasses.
Condensation may form on the surface of the screen when the temperature changes
suddenly. Wipe it with a soft dry cloth.
At cold temperatures, the screen may be darker than usual. This is not a malfunction.
The screen returns to normal when the camcorder warms up.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Viewfinder
Clean the viewfinder screen using a blower brush or a commercially available cleaning
cloth for glasses.
E
Video Heads
When the playback picture becomes distorted, the video heads need to be cleaned.
To maintain the best picture quality, we recommend cleaning the video heads
frequently with the Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available dry cleaning cassette.
Tapes already recorded with dirty video heads may not be played back correctly even
when you clean the video heads.
Do not use wet type cleaning cassettes as this may damage the camcorder.
Condensation
Moving the camcorder rapidly between hot and cold temperature may cause
condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if
condensation is detected. Continued use may damage the camcorder.
Condensation may form in the following cases:
When the camcorder is moved from an
air-conditioned room to warm, humid
place
When the camcorder is moved from a
cold place to a warm room
When the camcorder is left in a humid
room
When a cold room is heated rapidly
How to avoid condensation:
Unload the cassette, place the camcorder in an airtight plastic bag and let it adjust to
temperature changes slowly before removing it from the bag.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
When condensation is detected:
The camcorder stops operating and the warning message “CONDENSATION HAS
BEEN DETECTED” appears for approx. 4 seconds and “ ” starts flashing.
If a cassette is loaded, the warning message “REMOVE THE CASSETTE” appears
and “ ” starts flashing. Remove the cassette immediately and leave the cassette
compartment open. Leaving the cassette in the camcorder may damage the tape.
A cassette cannot be loaded when condensation is detected.
Resuming use:
It takes about 1 hour until the water droplets evaporate. After the condensation warning
stops flashing, wait for 1 more hour before resuming use.
Battery Pack Handling Precautions
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures higher than 60 °C (140 °F). Do not
leave it near a heater or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
Charged battery packs continue to discharge naturally. Therefore, charge them on the
day of use, or the day before, to ensure a full charge.
Attach the terminal cover whenever a battery pack is not in use. Contact with metallic
objects may cause a short circuit and damage the battery pack.
Dirty terminals may cause a poor contact between the battery pack and the camcorder.
Wipe the terminals with a soft cloth.
Since storing a charged battery pack for a long time (about 1 year) can shorten its
lifecycle or affect performance, we recommend to discharge the battery pack fully and
to store it in a dry place at temperatures no higher than 30 °C (86 °F). If you do not use
the battery pack for long periods, charge and discharge it fully at least once a year. If
you have more than 1 battery pack, perform these precautions at the same time for all
battery packs.
Although the battery pack’s operating temperature range is from 0 °C to 40 °C (32 °F
to 104 °F), the optimal range is from 10 °C to 30 °C (50 °F to 86 °F). At cold
temperatures, performance will temporarily decline. Warm it in your pocket before use.
Replace the battery pack if the usable time after full charge diminishes substantially at
normal temperatures.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
About the battery terminal cover
The battery terminal cover has a [
]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs. For example, with charged
battery packs, attach the terminal cover so that the [
label.
]-shaped hole shows the blue
E
Back side of the
battery pack
Terminal cover attached
Charged
Uncharged
Lithium Button Battery Handling Precautions
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not recharge, disassemble, heat above 100 °C (212 °F) or incinerate
the battery.
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or
explosion.
Do not pick up the battery using tweezers or other metal tools as this will cause a short
circuit.
Wipe the battery with a clean dry cloth to ensure proper contact.
Keep the battery out of reach of children. If it is swallowed, seek medical assistance
immediately. The battery case may break and the battery fluids may damage stomach
and intestines.
Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.
Cassette Handling Precautions
Rewind tapes after use. If the tape becomes slack and damaged, it may cause picture
and sound distortion.
Return cassettes in the case and store them upright.
Do not leave the cassette in the camcorder after use.
Do not use spliced tapes or nonstandard cassettes as they may damage the
camcorder.
Do not use tapes that have been jammed as video heads may become dirty.
Do not insert anything into the small holes of the cassette, or cover them with
cellophane tape.
Handle cassettes with care. Do not drop or subject them to severe impact as this may
damage the cassettes.
Rewind tapes from time to time if they are stored for a long time.
With cassettes equipped with a memory function, metal plated terminals may become
dirty with use. Clean the terminals with a cotton swab after about 10 times of loading/
unloading. The memory function is not supported by the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental
erasure, slide the tab on the cassette to the
left. (This switch position is usually labeled
SAVE or ERASE OFF.)
REC
SAVE
If you load a protected cassette in CAMERA
mode, the message “THE TAPE IS SET FOR
ERASURE PREVENTION” appears for
REC
SAVE
approx. 4 seconds and “ ” starts flashing. If
you wish to record on that cassette, slide the tab back to the right.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to charge battery
packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult
the Canon Service Center for information on plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs with NTSC system. The NTSC system is
used in the following countries/areas:
American Samoa, Antigua, Aruba, Bahamas, Barbados, Bermuda, Bolivia, Canada,
Chile, Colombia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Greenland,
Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico, Saint Kitts and Nevis, Saint Lucia, Saint Vincent
and the Grenadines, Surinam, Taiwan, Trinidad and Tobago, USA, Venezuela, Virgin
Islands.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a
Canon Service Center if the problem persists.
E
Power Source
Problem
Camcorder will not turn on.
Cause
Battery pack is exhausted.
Solution
Replace or charge the battery
12
12
12
21
12
15
12
–
pack.
Battery pack is not correctly
attached.
Battery pack is exhausted.
Attach the battery pack
correctly.
Replace or charge the battery
pack.
The camcorder switches off
by itself.
Power save function has
been activated.
Battery pack is exhausted.
Turn on the camcorder.
Cassette compartment will
not open.
Replace or charge the battery
pack.
Cassette compartment cover Open the cassette
is not fully open.
Battery pack is exhausted.
compartment cover fully.
Replace or charge the battery
pack.
Cassette compartment
stopped during loading/
unloading.
The camcorder malfunctions. Consult a Canon Service
Center.
LCD/viewfinder switches on
and off.
Battery pack will not charge.
Battery pack is exhausted.
Replace or charge the battery
pack.
Charge the battery pack in
temperatures between 0 °C
and 40 °C (32 °F and 104 °F).
12
–
Battery packs will not charge
outside the temperature
range of 0 °C and 40°C (32
°F and 104 °F).
Battery packs become hot
Wait until the battery pack
–
–
with use and may not charge. temperature is below 40 °C
(104 °F) and retry charging.
The battery pack is damaged. Use a different battery pack.
Recording/Playback
Problem
Buttons will not work.
Cause
Solution
Turn on the camcorder.
Load a cassette.
Camcorder is not turned on.
Cassette is not loaded.
Cassette is not loaded.
20
15
15
12
“
“
” flashes on the screen.
Load a cassette.
” flashes on the screen. Battery pack is exhausted.
Replace or charge the battery
pack.
“
” flashes on the screen. Condensation is detected.
See reference page.
71
15
“REMOVE THE CASSETTE” Camcorder stopped operating Unload and reload the
appears on the screen. to protect the tape. cassette.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Recording
Problem
Image will not appear on the
screen.
Cause
Solution
Camcorder is not set to
Set the camcorder to
20
18
14
mode.
mode.
“SET THE TIME ZONE,
Time zone, date and time are Set the time zone, date and
DATE AND TIME” appears on not set.
the screen.
time.
Backup battery is exhausted. Replace the backup battery
and reset the time zone, date
and time.
Backup battery is inserted the Insert the backup battery with
14
wrong way.
the + side facing outward and
set the time zone, date and
time.
Pressing the start/stop button Camcorder is turned off.
Turn on the power.
Load a cassette.
20
15
15
will not start recording.
Cassette is not loaded.
Tape reached the end
Rewind the tape or replace
the cassette.
(“
END” flashes on the
screen).
Cassette is protected (“
flashes on the screen).
Camcorder is set to a mode
other than the
mode.
”
Change the position of the
protect switch.
Set the camcorder to
mode.
74
20
Camcorder will not focus.
Autofocus does not work on
that subject.
Viewfinder is not adjusted.
Focus manually.
41
16
Adjust the viewfinder with the
dioptric adjustment lever.
Lens is dirty.
Clean the lens.
70
–
A vertical light bar appears on Bright light in a dark scene
the screen.
may cause a vertical light bar
(smear) to appear. This is not
a malfunction.
– – –
Viewfinder picture is blurred.
Viewfinder is not adjusted.
Adjust the viewfinder with the
dioptric adjustment lever.
16
–
Sound is distorted or
recorded in a lower volume
than the actual volume.
When recording near loud
sound (such as fireworks,
drums or concerts), sound
may become distorted or may
not be recorded in the actual
sound level. This is not a
malfunction.
– – –
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Playback
Problem
Cause
Solution
Pressing the playback button Camcorder is turned off, or is Set the camcorder to
27
does not start playback.
E
not set to
mode.
mode.
Cassette is not loaded.
Tape reached the end
Load a cassette.
Rewind the tape.
15
27
(“
END” flashes on the
screen).
Tape is running, but image will TV/VIDEO selector on the TV Set the selector to VIDEO.
not appear on the TV screen. is not set to VIDEO.
30
Video heads are dirty.
Clean the video heads.
71
–
You attempted to play back or Stop playback/dubbing.
dub copyright protected tape.
No sound from the built-in
speaker.
Speaker volume is turned off. Adjust the volume with the
[SPEAKER VOLUME] option.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
77
System Diagram
(Availability differs from area to area)
WS-20 Wrist Strap
Shoulder Strap
CBC-NB2
CB-2LT
CB-2LW
Battery Charger
Car Battery Charger Battery Charger
MiniDV
Video Cassette
NB-2L, NB-2LH,
BP-2L5*, BP-2L12,
BP-2L14 Battery Pack
CA-570 Compact
Power Adapter
NB-2L, NB-2LH,
BP-2L5, BP-2L12,
BP-2L14 Battery Pack
TV
STV-250N
Stereo Video Cable
VCR
Commercially available
DV Cable
Digital Device
SC-2000 Soft
Carrying Case
* The BP-2L5 is not available as a separate optional accessory.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accessories. You can also
obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon
U.S.A. Information Center.
E
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
Battery Packs
When you need extra battery packs, select
from the following: NB-2L, NB-2LH, BP-2L12,
BP-2L14.
CB-2LT/CB-2LW Battery Charger
Use the battery charger for charging the
battery packs. It plugs directly into a power
outlet without a cable.
Battery Pack
BP-2L5
Charging Time
70 min.
NB-2L
80 min.
NB-2LH
90 min.
BP-2L12
BP-2L14
150 min.
170 min.
Charging time varies according to the charging condition.
CBC-NB2 Car Battery Charger
Use the car battery charger to charge battery
packs on the move. The car battery cable
plugs into your car’s cigarette lighter and runs
off a 12-24 V DC negative ground battery.
WS-20 Wrist Strap
Use this for extra additional protection for
active shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Shoulder Strap
You can attach a shoulder strap for more
security and portability.
Pass the ends through the strap mount and
adjust the length of the strap.
SC-2000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
This mark identifies genuine Canon video accessories. When you
use Canon video equipment, we recommend Canon-brand
accessories or products bearing the same mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Specifications
ZR500
E
System
Video Recording System
2 rotary heads, helical scanning DV system (consumer digital VCR SD
system), digital component recording
Audio Recording System
Television System
Image Sensor
PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch)
EIA standard (525 lines, 60 fields) NTSC color signal
1/6-inch CCD, approx. 680,000 pixels
Effective pixels: Tape: 16:9 (with image stabilizer): approx. 400,000
16:9 (no image stabilizer): approx. 450,000
4:3 recording: approx. 340,000
Tape Format
Tape Speed
Maximum Recording Time
(80 min. cassette)
Videocassettes bearing the “MiniDV” mark.
SP: 18.81 mm/s (0.74 ips), LP: 12.56 mm/s (0.49 ips)
SP: 80 min., LP: 120 min.
Fast Forward/Rewind Time
LCD Screen
Viewfinder
Approx. 2 min. 20 sec. (with a 60 min. cassette)
2.7-inch. wide, TFT color, approx. 112,000 pixels
0.3-inch. TFT color, approx. 123,000 pixels
Stereo electret condenser microphone
Microphone
Lens
f=2.6-65 mm, F/1.8-4.4, 25x power zoom
35 mm equivalent:
Tape:16:9 (with image stabilizer): 43.8-1095 mm
16:9 (no image stabilizer): 41.0-1025 mm
4:3 recording: 49.8-1245 mm
Lens Configuration
AF System
Minimum Focusing Distance
White Balance
10 elements in 8 groups
TTL autofocus, manual focusing possible
1 m (3.3 ft.); 1 cm (0.39 in.) on maximum wide angle
Auto white balance, pre-set white balance (DAYLIGHT, TUNGSTEN) or
custom white balance
Minimum Illumination
Recommended Illumination
Image Stabilization
2.0 lx (Night recording program, shutter speed at 1/8)
More than 100 lx
Electronic
Input/Output Terminals
AV Terminal
Ø3.5 mm minijack, output only
Video:1 Vp-p/75 ohms unbalanced
Audio:–10 dBV (47 kohm load)/3 kohms or less
DV Terminal
MIC Terminal
Special 4-pin connector (IEEE 1394 compliant)
Ø3.5 mm stereo mini-jack
–57 dBV (with 600 ohm mic)/5 kohms or more
Power/Others
Power supply (rated)
7.4 V DC
Power consumption (AF on)
Operating temperature
Dimensions (W x H x D)
Weight (camcorder body only)
2.4W (using viewfinder), 2.5W (using LCD screen in normal brightness)
0 – 40 °C (32 – 104 °F)
49 x 92 x 115 mm (1.9 x 3.6 x 4.5 in.) excluding protrusions
375 g (13.2 oz.)
Download from Www.Somanuals.com. All Manuals Search And Download.
81
CA-570 Compact Power Adapter
Power supply
Power consumption
Rated output
100 – 240 V AC, 50/60 Hz
17W
8.4 V DC, 1.5 A
Operating temperature
Dimensions
Weight
0 – 40 °C (32 – 104 °F)
52 x 90 x 29 mm (2.1 x 3.5 x 1.1 in.)
135 g (4.8 oz.)
BP-2L5 Battery Pack
Battery type
Rechargeable Lithium Ion Battery
Rated voltage
Operating temperature
Battery capacity
Dimensions
7.4 V DC
0 – 40 °C (32 – 104 °F)
530 mAh
33.3 x 16.2 x 45.2 mm (1.3 x 0.64 x 1.8 in.)
40 g (1.4 oz.)
Weight
Weight and dimensions are approximate. Errors and omissions excepted. Subject to
change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Item Codes
Provided Accessories
CA-570 Compact Power Adapter
STV-250N Stereo Video Cable
E
8468A002AA
3067A002AA (D82-0590-201)
Optional Accessories
BP-2L12 Battery Pack
BP-2L14 Battery Pack
7871A002AA
9582A002AA
NB-2L Battery Pack
7302A001AA
CB-2LT Battery Charger
CBC-NB2 Car Battery Charger
WS-20 Wrist Strap
7303A001AA
7873A002AA
3118A002AA (D81-0190-202)
9389A001AA
3083A002AA (D81-1200-201)
D81-1302-201
3134A002AA (D36-0032-201)
SC-2000 Soft Carrying Case
SC-1000 Soft Carrying Case
SC-A50 Soft Carrying Case
DVM-CL DV Cleaning Cassette
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Index
16:9 (Widescreen) . . . . . . . . . . . . . . . . 54
6-second auto date . . . . . . . . . . . . . . . 56
G
Grip belt . . . . . . . . . . . . . . . . . . . . . . . . 16
A
H
Abroad, using the camcorder . . . . . . . . 74
Accessories . . . . . . . . . . . . . . . . . . . . . 79
Audio mode . . . . . . . . . . . . . . . . . . . . . 49
Audio output channel . . . . . . . . . . . . . . 32
Auto slow shutter . . . . . . . . . . . . . . . . . 46
Autofocus . . . . . . . . . . . . . . . . . . . . . . . 41
AV terminal . . . . . . . . . . . . . . . . . . . . . . 30
Handling precautions . . . . . . . . . . . . . . 70
I
Image effects . . . . . . . . . . . . . . . . . . . . 44
Image stabilizer . . . . . . . . . . . . . . . . . . . 61
Infinity focus . . . . . . . . . . . . . . . . . . . . . 42
L
B
Language . . . . . . . . . . . . . . . . . . . . . . . 59
LCD backlight . . . . . . . . . . . . . . . . . . . . 17
LCD brightness . . . . . . . . . . . . . . . . . . . 60
LCD screen . . . . . . . . . . . . . . . . . . . . . . 17
LP mode . . . . . . . . . . . . . . . . . . . . . . . . 48
Backup battery . . . . . . . . . . . . . . . . . . . 14
Battery pack . . . . . . . . . . . . . . . . . . . . . 12
Beach (recording program) . . . . . . . . . 36
Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
C
M
Condensation . . . . . . . . . . . . . . . . . . . . 71
Connection to a computer . . . . . . . . . . 66
Connection
Magnification of playback image . . . . . 55
Maintenance . . . . . . . . . . . . . . . . . . . . . 70
Manual focus . . . . . . . . . . . . . . . . . . . . 41
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Messages . . . . . . . . . . . . . . . . . . . . . . . 69
MIC (microphone) terminal . . . . . . . . . . 50
to a digital recording device . . . . . . . . 63
Connection to a TV or VCR . . . . . . . . . 30
Copyright signals . . . . . . . . . . . . . . . . . 65
D
N
Data code . . . . . . . . . . . . . . . . . . . . . . . 56
Date and time . . . . . . . . . . . . . . . . . . . . 18
Date format . . . . . . . . . . . . . . . . . . . . . 59
Demo mode . . . . . . . . . . . . . . . . . . . . . 62
Night (recording program) . . . . . . . . . . 36
O
Digital effects . . . . . . . . . . . . . . . . . . . . 51 On-screen displays . . . . . . . . . . . . . . . . 67
Digital zoom . . . . . . . . . . . . . . . . . . . . . 25 Operating modes . . . . . . . . . . . . . . . . . . 6
DV dubbing . . . . . . . . . . . . . . . . . . . . . 65
DV terminal . . . . . . . . . . . . . . . . . . 63, 66
P
Playback . . . . . . . . . . . . . . . . . . . . . . . . 27
E
Portrait (recording program) . . . . . . . . . 36
Easy mode . . . . . . . . . . . . . . . . . . . . . . 36 Power adapter . . . . . . . . . . . . . . . . . . . 12
Effects . . . . . . . . . . . . . . . . . . . . . . . . . 52 Program AE (recording program) . . . . . 36
End search . . . . . . . . . . . . . . . . . . . . . . 57
Exposure . . . . . . . . . . . . . . . . . . . . . . . 40
Protecting tapes . . . . . . . . . . . . . . . . . . 74
R
F
Record review . . . . . . . . . . . . . . . . . . . . 22
Faders . . . . . . . . . . . . . . . . . . . . . . . . . 51 Record search . . . . . . . . . . . . . . . . . . . 22
Fireworks (recording program) . . . . . . . 37
Recording . . . . . . . . . . . . . . . . . . . . . . . 20
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Recording mode . . . . . . . . . . . . . . . . . . 48
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Recording programs . . . . . . . . . . . . . . . 36
S
Self timer . . . . . . . . . . . . . . . . . . . . . . . 47
Shutter speed . . . . . . . . . . . . . . . . . . . . 45
Snow (recording program) . . . . . . . . . . 36
SP mode . . . . . . . . . . . . . . . . . . . . . . . 48
Speaker volume . . . . . . . . . . . . . . . . . . 29
Sports (recording program) . . . . . . . . . 36
Spotlight (recording program) . . . . . . . . 37
Start-up image . . . . . . . . . . . . . . . . . . . 61
Sunset (recording program) . . . . . . . . . 37
E
T
Time zone . . . . . . . . . . . . . . . . . . . . . . . 18
Transferring video to a computer . . . . . 66
Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting . . . . . . . . . . . . . . . . . . 75
V
Video heads . . . . . . . . . . . . . . . . . . . . . 71
Videocassettes . . . . . . . . . . . . . . . . . . . 15
Viewfinder, dioptric adjustment . . . . . . 16
Volume . . . . . . . . . . . . . . . . . . . . . . . . . 29
W
White balance . . . . . . . . . . . . . . . . . . . 43
Widescreen . . . . . . . . . . . . . . . . . . . . . 54
Wind screen . . . . . . . . . . . . . . . . . . . . . 49
Z
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Zoom speed . . . . . . . . . . . . . . . . . . . . . 25
Download from Www.Somanuals.com. All Manuals Search And Download.
85
U.S.A.
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
FOR THE UNITED STATES
The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment purchased in the
United States. The limited warranty is only effective upon presentation of your Bill of Sale or other proof of
purchase.
Canon consumer digital video equipment is warranted under normal, non-commercial, personal use, against
defective materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR
from the date of original purchase, except for a defective Video Head, which will be exchanged for a period of
three months from the date of purchase.
Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by our
factory service centers or designated service facilities located in the United States.
When returning equipment under this warranty, you must pre-pay the shipping charges, and you must enclose
the Bill of Sale or other proof of purchase with a complete explanation of the problem. During your ONE-YEAR
warranty period, repairs will be made and the equipment return-shipped to you free of charge. After your
warranty period is over, you will be given an estimate of the cost of repair and an opportunity to approve or
disapprove of the repair expense before it is incurred. If you approve, repairs will be made and the equipment
return-shipped to you. (shipping charges apply). If you disapprove, we will return-ship the equipment at no
charge to you.
Non-Canon brand peripheral equipment and software which may be distributed with Canon DV
camcorders are sold “AS IS” without warranty of any kind by CUSA, including any implied warranty
regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such
non-Canon brand items is given by the manufacturer or producer thereof.
CUSA shall have no responsibility under this limited warranty for use of Canon DV Camcorders in conjunction
with incompatible peripheral equipment and incompatible software.
In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV
Camcorder or call the CANON INFORMATION CENTER AT 1-800-828-4040). You will be directed to the
nearest service facility for your product.
This Limited Warranty covers all defects encountered in normal use of the equipment and does not apply in the
following cases:
A) Loss or damage to the equipment due to abuse, mishandling, accident, improper maintenance, or
failure to follow operating instructions;
B) If the equipment is defective as a result of leaking batteries, sand, dirt or water damage;
C)If defects or damages are caused by the use of unauthorized parts or by service other than our
authorized agent;
D)If the equipment is used for commercial or industrial use.
This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it
apply to equipment purchased outside the United States. This warranty does not cover units sold to rental firms,
military operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications.
These uses are covered only by such specific warranty as Canon may issue with such sales.
This Limited Warranty does not apply to accessories or consumables for the DV Camcorder, which are sold “AS
IS”, without warranty of any kind by CUSA.
Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card is most
important in order to be sure you are contacted right away should there be a safety inspection, modification or
product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS EQUIPMENT SHALL BIND THE UNDERSIGNED. (SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU). CUSA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR
PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OF
DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE DV CAMCORDER, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED, AND EVEN IF CUSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CUSA BE GREATER THAN THE PURCHASE
PRICE OF THE DV CAMCORDER SOLD BY CUSA AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE
OR INABILITY TO USE THE DV CAMCORDER NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CUSA.
(SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR
THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
CANADA
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
E
The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video
equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of
purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective
materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period
of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from
the date of purchase.
Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon
Service Facilities in Canada.
This limited warranty covers all defects except where:
(a) The loss or damage to the product results from:
i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow
instructions contained in the instruction manual;
ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not
conform to Canon specifications or that cause abnormally frequent service problems;
iii) repairs or services performed by any party other than a Canon Service Facility;
iv) defective batteries or any exposure to water, sand or dirt;
v) shipping (claim must be presented to the shipper);
(b) Any serial number on the video equipment is altered or removed.
(c) The digital video equipment is used for commercial, professional or industrial purposes.
This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head
cleanings, nor does it apply to digital video equipment purchased outside Canada.
TO OBTAIN WARRANTY SERVICE
Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with
shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the
problem to any of the Canon Service Facilities in Canada.
LIMITATIONS
Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions,
guarantees or representations, express or implied, statutory or otherwise, relative to this Canon product, including implied
warranties or conditions of merchantability or fitness for a particular purpose.
Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on
account of negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit,
revenue, video tapes or enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees
or representations. Any recovery under this limited warranty shall not exceed the purchase price of the product. Canon
Canada does not assume or authorize any other person to assume for Canon Canada any other liability with respect to
this Canon product.
This warranty does not extend to any person other than the original purchaser of this Canon product or the person for
whom it was purchased as a gift and states your exclusive remedy.
NOTICE TO CONSUMER
If you plan to take important videos or if the product has not been used for some time, please check all functions with the
instruction book before using it.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
CANON INC.
U.S.A.
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CANON U.S.A., INC. CHICAGO OFFICE
100 Park Blvd., Itasca, IL 60143 USA
CANON U.S.A., INC. LOS ANGELES OFFICE
15955 Alton Parkway, Irvine, CA 92618 USA
CANON U.S.A., INC. HONOLULU OFFICE
210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA
Q If you have any questions, call the Canon U.S.A. Information Center
toll-free at 1-800-828-4040 (U.S.A. only).
CANADA
CANON CANADA INC. NATIONAL HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7
CANON CANADA INC. CALGARY
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7
CANON CANADA INC. MONTREAL
5990 Côte de Liesse, Quebec H4T 1V7
Q If you have any questions, call the Canon Canada Information
Center
toll-free at 1-800-828-4040 (CANADA only).
Q Si vous avez des questions, veuillez téléphoner sand frais au
Canada
1-800-828-4040 (CANADA seulement).
MEXICO
CANON MEXICANA, S. DE R.L. DE C.V.
Periferico Sur No. 4124 Col. Ex-Rancho de Anzaldo C.P. 01900
México, D.F., México
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CENTRO Y
SURAMÉRICA
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, FL 33126 USA
ASIA
CANON HONGKONG COMPANY LTD.
19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon,
Hong Kong
Printed on 100% reused paper.
Document réalisé avec du papier recyclé à 100%.
El papel aqui utilizado es 100% reciclado.
PRINTED IN JAPAN
IMPRIME AU JAPON
IMPRESO EN JAPÓN
PUB.DIM-735
00000/Ni0.0
© CANON INC. 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|
