PUB.DIM-420
DIGITAL VIDEO CAMCORDER
ENGLISH
E
Instruction Manual
CANON INC.
U.S.A.
CAMESCOPE ET LECTEUR VIDEO NUMERIQUES
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
Mode d’emploi
CANON U.S.A., INC. CHICAGO OFFICE
100 Park Blvd., Itasca, IL 60143 USA
CANON U.S.A., INC. LOS ANGELES OFFICE
15955 Alton Parkway, Irvine, CA 92618 USA
VIDEOCAMARA Y GRABADORA DIGITAL
CANON U.S.A., INC. HONOLULU OFFICE
210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA
Manual de Instrucciones
● If you have any questions, call the Canon U.S.A. Information
Center toll-free at 1-800-828-4040 (U.S.A. only).
CANADA
CANON CANADA INC. NATIONAL HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7
CANON CANADA INC. CALGARY
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7
CANON CANADA INC. MONTREAL
5990 Côte de Liesse, Quebec H4T 1V7
● If you have any questions, call the Canon Canada Information
Center toll-free at 1-800-828-4040. (Canada only)
● Si vous avez des questions, veuillez téléphoner sans frais au
Canada 1-800-828-4040. (Canada seulement)
MEXICO
CANON MEXICANA, S. DE R.L. DE C.V.
Periferico Sur No. 4124 Col. Ex-Rancho de Anzaldo C.P. 01900
México, D.F., México
CENTRO Y
SURAMÉRICA
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, FL 33126 USA
Digital
Video
Cassette
Mini
ASIA
CANON HONGKONG COMPANY LTD.
9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong
This instruction book explains the use of the ZR50 MC and ZR45 MC camcorders. Please note
that illustrations and explanations in this instruction book refer mainly to the ZR50 MC model.
Ce mode d’emploi explique l’utilisation des camescopes ZR50 MC et ZR45 MC. Veuillez noter que
des illustrations et les explications de ce mode d’emploi renvoient essentiellement au modèle
ZR50 MC.
Printed on 100% reused paper.
Document réalisé avec du papier recyclé à 100%.
El papel aqui utilizado es 100% reciclado.
Este manual de instrucciones explica el uso de las videocámaras ZR50 MC y ZR45 MC. Por favor
tenga en cuanta que las instrucciones y las explicaciones de este manual de instrucciones
corresponden principalmente al modelo ZR50 MC.
PRINTED IN JAPAN
IMPRIME AU JAPON
IMPRESO EN JAPÓN
PUB.DIM-420
0000A/ABXX
© CANON INC. 2002
DY8-9120-308-000
NTSC
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Usage Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
E
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE
ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES
ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the
rights of copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ZR50 MC/ZR45 MC systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and use in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
Important Warning
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
the product’s enclosure, that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
The exclamation point, within an
SHOCK, DO NOT REMOVE COVER (OR
equilateral triangle, is intended to alert
BACK). NO USER-SERVICEABLE PARTS
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
accompanying the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word
“product” refers to the Canon Digital Video
Camcorder ZR50 MC A/ZR45 MC A and all
its accessories.
10. Power Sources — The CA-560 Compact
Power Adapter should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
E
1. Read Instructions — All the safety and
operating instructions should be read
before the product is operated.
home, consult your product dealer or
local power company. Regarding other
power sources such as battery power,
refer to instructions in this manual.
2. Retain Instructions — The safety and
operating instructions should be retained
for future reference.
11. Polarization — The CA-560 Compact
Power Adapter is equipped with a
polarized 2-prong plug (a plug having
one blade wider than the other).
3. Heed Warnings — All warnings on the
product and in the operating instructions
should be adhered to.
The 2-prong polarized plug will fit into
the power outlet only one way. This is a
safety feature. If you are unable to insert
the plug fully into the outlet, try reversing
the plug. If the plug still fails to fit,
4. Follow Instructions — All operating and
maintenance instructions should be
followed.
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
5. Cleaning — Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as
12. Power Cord Protection — Power cords
should be routed so that they are not
likely to be walked on or pinched by
items placed upon or against them. Pay
particular attention to plugs and the point
from which the cords exit the product.
recommended in this manual.
6. Accessories — Do not use accessories
not recommended in this manual as
they may be hazardous.
7. Avoid magnetic or electric fields — Do
not use the camera close to TV
transmitters, portable communication
devices or other sources of electric or
magnetic radiation. They may cause
picture interference, or permanently
damage the camera.
13. Outdoor Antenna Grounding — If an
outside antenna is connected to the
product, be sure the antenna is
grounded so as to provide some
protection against voltage surges and
built-up static charges. Section 810 of
the National Electrical Code, ANSI /
NFPA No. 70—1984, provides
8. Water and Moisture — Hazard of electric
shock — Do not use this product near
water or in rainy/moist situations.
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See figure
1.
9. Placing or Moving — Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child
or adult, and serious
damage to the product.
A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces may cause the
product and cart combination to
overturn.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
18. Damage Requiring Service —
Disconnect this product from the wall
outlet and all power sources including
battery, and refer servicing to qualified
service personnel under the following
conditions:
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Fig. 1
E
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE
UNIT
(NEC SECTION
810-20)
a. When the power-supply cord or plug is
damaged.
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to
rain or water.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE
GROUNDING ELECTRODE
SYSTEM
(NEC ART 250. PART H)
NEC NATIONAL ELECTRICAL CODE
-
d. If the product does not operate
normally even if you follow the
operating instructions. Adjust only
those controls that are covered by the
operation instructions. Improper
adjustment of other controls may
result in damage and will often require
extensive work by a qualified
technician to restore the product to its
normal operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates
a need for service.
14. Lightning — For added protection of this
product during a lightning storm, or when
it is left unattended and unused for long
periods of time, disconnect it from the
wall outlet and disconnect the antenna.
This will prevent damage to the product
due to lightning and power-line surges.
15. Overloading — Do not overload wall
outlets and extension cords as this can
result in a risk of fire or electric shock.
16. Objects and Liquid Entry — Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out
parts that could result in a fire or electric
shock. Be careful not to spill liquid of any
kind onto the product.
19. Replacement Parts — When
replacement parts are required, be sure
the service technician has used
replacement parts that are specified by
Canon or that have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
17. Servicing — Do not attempt to service
this product yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
20. Safety Check — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is
in safe operating order.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Step and Reference Guide
Your camcorder is supplied with two manuals: the “Digital Video Camcorder
ZR50 MC/ZR45 MC Instruction Manual” and the “Digital Video Solution Disk
Instruction Manual”.
E
Digital Video Camcorder ZR50 MC/ZR45 MC
Instruction Manual
Mastering the Basics
Using the Full Range of Features
Editing
Using the memory card
Digital Video Solution Disk Instruction Manual
Installing the software
Connecting the Camcorder to a Computer
Downloading the Still Image to a Computer
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Turning the Image Stabilizer Off ............58
Introduction
Important Usage Instructions ....................2
Using the Various Recording
E
Programs..............................................59
IMPORTANT SAFETY
Using Digital Effects................................63
Using the Multi-Image Screen ................68
Audio Recording ......................................70
Setting the Self-Timer ..............................72
INSTRUCTIONS ..................................3
Operating Step and Reference Guide ........5
Thank you for Choosing a Canon ..............8
Introducing the ZR50 MC/ZR45 MC ........9
Using the VL-3 Video Light
(optional) ............................................74
Mastering the Basics
Using the DM-50 Microphone
(optional) ............................................75
Finding Your Way Around
the ZR50 MC/ZR45 MC ....................10
~ When Making Manual Adjustments ...~
Ajusting AE Shift ....................................76
~ Preparations ... ~
Powering Your Camcorder ......................13
Setting the Shutter Speed ........................77
Adjusting Focus Manually ......................79
Setting the White Balance........................80
Loading a Cassette ..................................18
~ Basic Recording ... ~
Basic Recording ......................................20
~ For Playback ...~
Displaying Date, Time and Camcorder Data
Zooming ..................................................25
Using the LCD Screen ............................27
(Data Code) ........................................82
Searching the Tape (Photo Search/
~ Basic Playback ... ~
Playing Back a Cassette ..........................30
Date Search) ........................................85
Returning to a Pre-Marked Position ........86
Connections for Playback on a
TV Screen............................................34
Editing
Tips for Making Better Videos ................37
Editing to a VCR......................................87
Using the Full Range of
Features
Dubbing to/from a Cassette with Digital
Video Equipment ................................88
Recording from a VCR, TV or Analog
Camcorder (Analog Line-in) ..............90
~ General ... ~
Searching and Reviewing While
Digitally outputting analog video
and audio signals
Recording ............................................39
Using the Menus ......................................40
Using the Wireless Controller ..................49
(Analog-Digital Converter) ................92
Recording Over Existing Scenes
Adjusting the Selectable Color
Light-up Buttons ................................52
(AV Insert Editing)..............................94
Audio Dubbing ........................................97
Setting the Audio Mix............................100
Connecting to a PC Using a DV Cable..102
~ For Recording ...~
Setting the Date and Time........................53
Taking Still Pictures to a Cassette............56
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Memory Card Still Images
Using a Memory Card
Memory Card Introduction ....................103
to a Cassette ......................................125
E
Formatting a Memory Card....................126
Recording Still Images to a
Utilizing memory card
Memory Card ....................................107
still images on a PC ..........................127
Recording an Image from a Cassette as a
Still Image ........................................109
Other Information and Precautions........128
Recording from Another DV Device as a
Still Image ........................................110
Additional Information
Preparing the Camcorder........................131
Notes on Using the Batteries..................133
Maintenance ..........................................137
Troubleshooting......................................141
Viewing Still Images ..............................111
Settings of the Still Image Recorded
to a Memory Card ............................113
Preventing Accidental Erasure
The ZR50 MC/ZR45 MC
(Protect) ........................................116
System Diagram ................................145
Marking a Still Image for Printing
(Print Mark)..................................117
Optional Accessories..............................146
Screen Displays......................................149
Specifications ........................................156
Index ......................................................158
Menu at a Glance ..................................161
Erasing Still Images ..........................119
Combining Images and Recording Them
to a Cassette (Card Mix) ..................121
Copying Still Images from a Cassette....124
For quick reference
In addition to the contents and index
please refer to:
Symbols used in this instruction manual:
: Reference page numbers
• Finding Your Way Around the
ZR50 MC/ZR45 MC ( 10)
• Screen displays ( 149)
• Troubleshooting — in case you run
into any problems ( 141)
• Menu at a Glance ( 161)
: Functions that can be operated
from the body of the camcorder
: Functions that can be operated
from the wireless controller
: Supplementary notes for
camcorder operation
` : Operation confirmation beeps
(
24)
• Capital letters are used to refer to
settings displayed in the menus and
buttons labeled on the camcorder
itself, e.g. Press the MENU button.
• The illustrated screens are for the
ZR50 MC.
The serial number of this product may be found on
the bottom of the camcorder. No others have the
same serial number as yours. You should record
the number and other vital information here and
retain this book as a permanent record of your
purchase to aid identification in case of theft.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model Name ZR50 MC/ZR45 MC
Serial No.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for Choosing a Canon
First, we’d like to thank you for
purchasing this Canon camcorder. Its
advanced technology makes it very
easy to use — you will soon be making
high-quality videos which will give you
pleasure for years to come.
Your camcorder is supplied with the
following accessories:
E
WL-D77 Wireless
Controller
Two AA batteries
Two AA batteries
WL-D74 Wireless
Controller
To get the most out of your new
camcorder, we recommend that you
read this manual thoroughly — there
are many sophisticated features which
will add to your recording enjoyment.
SS-800 Shoulder Strap Lens cap and lens cap
SS-600 Shoulder Strap Lens cap and lens cap
cord
cord
Getting started
To get started we suggest that you
master the basic operations of the
camcorder first, before moving on to
use its full range of features.
CA-560 Compact
BP-512
BP-511 Battery Pack
CA-560 Compact Power
Power Adapter
Adapter (including AC
BP-508
Battery Pack
(including AC power
power cable)
cable)
Lithium button battery
Lithium button battery
STV-250N Stereo
Video Cable
S-150 S-video Cable
MMC-8M
Soft case for
MultiMediaCard
STV-250 Stereo Video
MultiMediaCard
Cable
(with pre-recorded
sample images)
Digital Video Solution
Disk Software
CD-ROM*
IFC-300PCU USB
cable*
* Required when you want to use your
PC to utilize images on a memory
card recorded with the camcorder.
For details, see the software
instruction manual.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the ZR50 MC/ZR45 MC
Extended Recording Time
Function
22× Lens and 440×
Digital Zoom
E
Record for 1.5×, 2× or 3× longer than
18× Lens and 360×
Digital Zoom
when in SP mode – up to 4 hours on an
80 minute tape. (
1,5× only)
USB Terminal
Image Stabilizer
Allows high speed transfer of memory
card data to PCs mounting the USB
terminal. By using the software provided,
you can process and organize still images
on your PC.
Stabilizes your recordings
even in long telephoto
shots.
Night Mode
Advanced
Accessory Shoe
In dark places, automatically adjusts to
the optimum shutter speed according to
the brightness of the subject for shooting
brightly in color.
Allows the Canon Video Light VL-3 or
the Directional Stereo Microphone DM-
50 (both optional) to be easily attached
and powered by the camcorder’s own
power source.
IEEE 1394 DV Terminal
Using a DV cable, connect
the camcorder to a PC
equipped with a DV
terminal and transfer your
original images and sound
to your PC.
Digital Effects
Advanced digital
technology allows you to
add special effects during
recording or playback.
Display 4, 9 or 16 still
images at once with the
multi-image screen.
Memory Card
Record, manage and store still images on
a MultiMediaCard or an SD Memory
Card. Recorded images can be
immediately checked by the press of a
single button, allowing you to erase them
or set protection. Combine still images
recorded on the card with your original
movies or still images. Also great for
easy transfer of still images to a PC.
Selectable Color
Light-up Buttons
Analog Line-in Recording
Connect to a VCR or
analog camcorder and
record onto a DV tape in
the camcorder.
Still Photos
Just press the photo button
to capture still pictures.
You can record vivid still
images onto a memory
card with the incorporated
mechanical shutter.
Audio Dubbing/AV Insert Editing
(Progressive Photo)
2.5” LCD Screen
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding Your Way Around the ZR50 MC/ZR45 MC
E
–
+
REC (record) SEARCH button(p. 39)/
REC SEARCH button (p. 39)/
Record review button (p. 39)/
(rewind) button (p. 30)/
(fast forward) button (p. 30)/
+
CARD button (p. 111)
–
CARD button (p. 111)
FOCUS button (p. 79)/
(play/pause) button (p. 30)/
SLIDE SHOW button (p. 112)
AE SHIFT button (p. 76)/
(stop) button (p. 30)/
Index screen button (p. 112)
LCD panel OPEN button (p. 27)
BATT. (battery) RELEASE
button (p. 15)
LCD screen (p. 27)
Memory card compartment
cover (p. 104)
Backup battery
cover (p. 135)
Battery attachment
unit (p. 14)
Strap attachment bar (p. 132)
Selector dial (p. 33, 41)
Self-timer button (p. 72)/
DATA CODE button (p. 82)
Card access indicator (p. 104)
Program selector (p. 59)
Card MIX button
(p. 123)
Program AE
P
DATA
CODE
MIX
P
Easy Recording
DIGITAL EFFECTS
button (p. 66)
DIGITAL
ON/OFF
MENU
EFFECTS
MENU button (p. 41)
Digital effects ON/OFF
button (p. 66)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
E
Viewfinder focusing lever (p. 131)
PHOTO button (p. 56, 107)
Viewfinder protect
cover (p. 138)
Advanced accessory
shoe (p. 74, 75)
Accessory shoe
(p. 97)
Zoom controller (p. 25)
Speaker (p. 33)
Serial number
(Body No.)
TAPE/CARD switch (p. 20)
Viewfinder (p. 131, 138)
CARD
TAPE
Strap attachment bar
(p. 132)
POWER indicator
(p. 20)
Start/Stop button (p. 21)
POWER switch (p. 20)
Grip belt (p. 131)
R
E
W
O
P
CAMERA
A
R
ME
•
A
C
OFF
•
F
F
O
PLAY(VCR)
}
PLAY(VCR)
•
Cassette compartment cover
(p. 18)
Cassette compartment (p. 18)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
E
Terminal cover
Remote sensor (p. 49)
Stereo microphone (p. 97)
Terminal cover
S-video IN/OUT
terminal (p. 35, 90)
u (LANC) terminal (p. 87)
S
DV
DV IN/OUT terminal
(p. 88, 92, 102, 110)
USB terminal (p. 127)
AV
AV (audio/video) IN/OUT
terminal (p. 34, 90, 92)/
DC IN
Bottom view
9.5V
CHARGE
(phones) terminal (p. 34)
MIC
CHARGE indicator
(p. 14)
OPEN/EJECT switch
(p. 18)
DC IN terminal (p. 13)
MIC terminal (p. 70, 97)
Tripod socket (p. 37)
PHOTO button (p. 56, 107)
Transmitter
START/STOP
button (p. 21)
Zoom buttons (p. 25)
MENU button (p. 41)
Controller buttons (p. 41)
SET button (p. 41)
START
ZOOM
/STOP PHOTO
W
T
SELF TIMER button (p. 72)
TV SCREEN button (p. 149)
DATA CODE button (p. 82)
SELF
MENU
TIMER
Digital effects ON/OFF button
(p. 66)
TV
SCREEN
SET
DATA
D.EFFECTS
AUDIO
ON/OFF
CODE
BAMLAINXCE
MIX BALANCE buttons (p. 100)
SLIDE SHOW button (p. 112)
MONITOR ST-1
ST-2
D.EFFECTS (Digital effects)
button (p. 66)
REC
PAUSE
–
CARD
+
SLIDESHOW
ZERO SET
MEMORY
SEARCH
SELECT
AUDIO MONITOR button (p. 100)
REC PAUSE button (p. 89, 91)
ZERO SET MEMORY button (p. 86)
Search buttons (p. 85)
SEARCH SELECT button (p. 85)
AUDIO
DUB.
REW
PLAY
STOP
SLOW
FF
+/
AV
INSERT –/
FF
PLAY
button (p. 30)
button (p. 30)
PAUSE
×2
REMOTE SET
SET
CARD
buttons (p. 111)
button (p. 31)
-
WIRELESS CONTROLLER WL D77
AUDIO DUB. button (p. 99)
AV INSERT button (p. 96)
× 2 button (p. 32)
STOP button (p. 30)
REMOTE SET button (p. 50)
SLOW
REW
button (p. 31)
button (p. 30)
button (p. 31)
PAUSE
button (p. 31)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Before operating your camcorder, you will need to use the power adapter to:
E
Provide power from an AC outlet
or
Charge a battery pack
Notes:
• The power adapter converts current from a household power socket (100–240 V
AC, 50/60 Hz) to the DC current used by your camcorder.
• If the adapter is used next to a TV, it may cause bars to appear on the TV —
move the adapter away from the TV or the antenna cable.
Connecting the camcorder to an AC outlet
R
1
WE
O
P
A
R
E
M
A
C
F
F
O
PLAY(VCR)
4
2
3
Use the power adapter to provide your camcorder with instant power from an AC
outlet. Always turn the camcorder off before connecting/removing the power
source.
1. Set the POWER switch to OFF.
2. Connect the power adapter to the camcorder’s DC IN terminal.
3. Connect the power cable to the power adapter.
4. Plug the power cable into an AC outlet.
5. Disconnect the power adapter from the camcorder after use.
Unplug the power cable from the AC outlet, then disconnect it from
the adapter.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching and charging the battery packs
E
1
POWER
A
R
E
M
A
C
DC IN
9.5V
F
F
O
CHARGE
PLAY(VCR)
3
3
4
CHARGE indicator
2
Your battery pack was partially charged before it left the factory. It should have
enough power for you to check that your camcorder is working properly.
However, you must charge the battery pack fully if you want it to power the
camcorder for more than a few minutes.
Always turn the camcorder off before connecting/removing the battery.
1. Set the POWER switch to OFF.
2. Attach the battery to the camcorder.
• Remove the battery packs’ terminal cover.
• Rotate the viewfinder upwards.
• With the triangle on the battery pack pointing downwards, align the edge of
the battery pack with the line on the camcorder, press lightly and slide the
battery down until it clicks into place.
3. Connect the power adapter to the camcorder.
4. Connect the power cable to the adapter and plug it into an AC
outlet.
• The charge indicator flashes red to show that charging is in progress. Single
flashes mean that the battery pack is less than 50% charged. Double flashes
mean that it is more than 50% charged. The indicator glows steadily when
the battery pack is fully charged. If the indicator blinks rapidly and
continuously (twice a second), the battery pack may be defective.
• The battery pack will also charge when the POWER switch is turned to
positions other than OFF. The CHARGE indicator may flash.
5. When charging is complete, disconnect the power adapter from the
camcorder. Unplug the power cable from the AC outlet, then
disconnect it from the adapter.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Remove the battery pack after use.
• Rotate the viewfinder upwards.
E
• Press and hold the BATT. RELEASE button while you slide the battery up.
Notes:
• Never connect an unspecified product to the camcorders’ DC terminal.
Likewise, do not connect the power adapter to an unspecified product.
• You can find detailed notes for using the batteries in the “Notes on Using the
Batteries”( 133). These notes include charging and recording times and how
to install the backup battery.
CA-560 Compact Power Adapter
Specifications
Power supply
Power consumption
Rated output
100–240 V AC, 50/60 Hz
34 W
9.5 V, 2.7 A DC
Operating temperature range 32°F1–04°F (0°C–40°C)
Dimensions
Weight
2 1/4 × 1 1/8 × 4 1/8 in (57 × 28 × 104 mm)
6 3/8 oz (180 g) (without power cable)
Weight and dimensions are approximate.
Errors and omissions excepted.
Subject to change without notice.
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it with the same
type number CA-560 or equivalent.
The Adapter can be used with a power supply between 100 and 240 V AC. For
areas where 120 V AC power is not used, you will need a special plug adapter.
Contact your nearest Canon Service Center for further information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Charge Adapter CR-560 Kit (optional)
E
The Compact Power Adapter CA-560 included with the camcorder can be used
along with the CR-560 Kit for 3 different ways to power the camcorder or charge
battery packs:
1. Charge the BP-500 Series battery packs with power from your car battery.
2. Operate the camcorder with power from your car battery.
3. Charge the BP-500 Series battery packs from a household AC outlet.
The Charge Adapter/Car Battery Cable Kit CR-560 includes the following:
DC Cable
Charge Adapter
Car Battery Cable
1. Charge the BP-500 Series battery packs with power from your car
battery.
1 or 2 battery pack(s) + Charge Adapter + Car Battery Cable→ cars’ cigarette
lighter
CHARGE
To car’s
cigarette lighter
• Fast charging for the high-capacity BP-522 and BP-535 (both optional). Fifteen
minutes of charging gives 70 minutes of recording (using the viewfinder).
Time required for full charge
from car battery or household outlet
BP-508
BP-512
BP-511 (optional)
BP-522 (optional)
BP-535 (optional)
1 hr. 20 min.
1 hr. 20 min.
1 hr. 20 min.
1 hr. 40 min.
2 hr. 30 min.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Operate the camcorder with power from your car battery.
Camcorder + DC Cable + Charge Adapter + Car Battery Cable → cars’
cigarette lighter
E
To car’s
cigarette lighter
3. Charge the BP-500 Series battery packs from a household AC
outlet.
1 or 2 battery pack(s) + Charge Adapter + Compact Power Adapter
CHARGE
• Fast charging for the high-capacity BP-522 and BP-535 (both optional). Fifteen
minutes of charging gives 70 minutes of recording (using the viewfinder).
Note:
• For full details of how to use the CR-560, refer to its instruction manual.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading a Cassette
E
P U S H
Only use videocassettes marked with the D logo.*
Loading and unloading
1. Make sure that you have attached a power source.
2. Slide the OPEN / EJECT 5 switch (on the bottom of the
camcorder) to release the cassette compartment cover.
• Pull the cover fully open (while holding the button) and wait a couple of
seconds for the cassette compartment to open automatically.
• The confirmation beep sounds when the cassette cover fully opens.
3. Load or unload the cassette.
• Insert the cassette gently with the window facing the grip belt, and the
REC/SAVE tab up.
• Remove the cassette by pulling it straight out.
4. Press the P mark on the compartment until it clicks, and wait
for it to close.
5. Click the cover back into place.
* D is a trade mark.
Notes:
• Do not interfere with the cassette compartment while it is opening or closing
automatically, and do not attempt to close the cover until the cassette
compartment has fully retracted.
• After loading a cassette, use record search ( 39) to find the point where you
want to start recording.
• Be careful not to get your fingers caught in the cassette compartment cover.
• Do not leave the cassette in the camcorder after use — return it to its case and
store it in a cool, clean, dry place.
• When you turn the camcorders’ power on, v flashes in the display until you
load a cassette.
• With some types of tapes, the remaining tape display may not give an accurate
reading ( 150).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting tapes from accidental erasure
E
REC
SAVE
REC
SAVE
To protect your recording from accidental erasure, slide the tab on the cassette so
that it exposes the hole. (This switch position is usually labeled SAVE or ERASE
OFF.)
If you load this cassette and put the camcorder in record pause mode ( 20),
T“ HE TAPE IS SET FOR ERASURE PREVENTION”is displayed for approx. 4
seconds and then the v mark flashes in the display.
If you want to record on the cassette again, slide the tab back so the hole is closed.
Handling cassettes
• To protect the tape heads, transfer cassettes directly from the tape case to the
camcorder — do not open the tape protect cover or touch the tape itself.
• Do not use cassettes where the tape has been damaged or spliced — they may
damage the camcorder.
• Do not insert anything into the small holes on the cassette or cover them with
cellophane tape.
• Handle cassettes with care — dropping them or exposing them to external
shocks may cause internal damage.
• Store cassettes in the provided case, first rewinding them to the start of the tape
and then storing them upright.
• A cassette with metal plated terminals may become dirty with use, affecting
information transfer. Therefore, after using a tape about 10 times, be sure to
clean the terminals with a cotton swab.
Cassette memory
You are unable to use the cassette memory function with this camcorder.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording
2 CARD
TAPE
E
4
R
E
W
O
P
1
CAMERA
F
F
O
P
PLAY(VCR)
5, 6
R
E
W
O
P
A
R
E
M
A
C
F
F
O
PLAY(VCR)
Before you start recording
Have you completed the following steps?
• Attached a power source ( 13).
• Removed the lens cap ( 131).
• Fasten the grip belt ( 131).
• Chosen the display: viewfinder ( 131) or LCD screen ( 27).
Notes:
• When your’e using the viewfinder, fully close the LCD or rotate the LCD so
that it faces the same direction as the lens ( 27).
• When using the viewfinder with the BP-522 or BP-535 Battery Pack (both
optional) attached, extend the viewfinder and rotate it to a comfortable angle.
You may also want to install the backup battery ( 135) in order to set the date
and time display ( 53).
To record
1. Press the small button on the POWER switch and hold, turn the
POWER switch to CAMERA.
• The camcorder automatically sets to record pause mode. PAUSE appears in
the display.
• If you havent’ set the date and time display, SET THE TIME ZONE, DATE
AND TIME appears in the display. For setting the time zone, see p. 53. For
setting the date and time, see p. 55.
• The camcorder power indicator lights up.
• The confirmation beep sounds.
• The camcorder will turn itself off if you leave it in record pause mode for
more than about 5 minutes. To return to record pause mode, turn the
POWER switch to OFF and then back to CAMERA.
2. Make sure the TAPE/CARD switch is set to TAPE.
• For still image recording to a memory card, see p. 107.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Load a cassette ( 18).
4. Slide the program selector to [.
E
• This selects the camcorders’ Easy Recording program. It allows you to
simply point and shoot without making any manual adjustments ( 61).
5. Press and release the start/stop button once to begin recording.
• For still image recording to a cassette, see p. 56.
6. Press and release the start/stop button again to pause recording.
• The camcorder returns to record pause mode and PAUSE reappears in the
display.
• You can stop and restart recording as often as you like by pressing the
start/stop button.
Note:
• After loading a cassette, start recording when the tape counter has stopped.
When you have finished recording
• Replace the lens cap.
• Return the viewfinder to its retracted position.
• Return the LCD screen flush to the camcorder body.
• Unload the cassette.
• Turn the POWER switch to OFF.
• Disconnect the power source.
Notes:
• To check that the camcorder is recording correctly, make a test recording first.
• Before making important recordings, clean the video heads using a Canon
DVM-CL Digital Video Head Cleaning Cassette or a commercially available
digital video head cleaning cassette.
• To close the LCD panel, rotate it vertically until the screen faces you, then press
the upper right corner until it clicks securely closed.
• You cannot monitor the sound from the speaker when recording.
• For tips on how to make better videos, see p. 37.
• For extra recording time, set REC MODE to any mode other than SP ( 22).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the recording mode
E
Choose from 4 recording modes: SP (standard play), 1.5× SP, 2× SP or 3× SP.
• Only SP and LP modes are available when the camcorder is set to CARD
PLAY (VCR) mode.
You can record and play back a tape in SP (standard play) and LP (long play)
modes. LP extends tape usage by 1.5 times.
Recording times (this example uses an 80-minute tape)
Standard recording
SP
Extended recording
LP
SP
2× SP
(160 min.)
–
LP
3× SP
(240 min.)
–
1.5× SP
(120 min.)
80 min.
In SP and LP modes, image data is compressed twice as much as in SP and
LP modes when being recorded to a tape.
You cant’ add sound (audio dubbing) or images (AV insert) to a tape that has
been recorded in a mode other than SP mode. If you plan to use either of these
functions later, record in SP mode.
PLAY
(VCR)
PLAY
(VCR)
TAPE
CAMERA
TAPE
CARD
+
+
+
,
,
VCR SET UP
REC MODE••••SP
(
40)
To change the recording mode, open the menu and select VCR SET UP.
Then select REC MODE, set it to LP, SP or LP and close the menu.
To change to LP mode, open the menu and select VCR SET UP. Then
select REC MODE, set it to LP and close the menu.
Notes:
About all 3 extended recording modes
• When recording and playing back tapes in one of the extended recording modes,
the nature of the tape and usage conditions may affect recording, mosaic-like
noise may appear in the image and the sound may be distorted during playback.
For important recordings, therefore, set the camcorder to SP mode.
• We recommend recording in SP mode when you plan to transfer images taken
with the camcorder to your PC.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you record in more than one mode on the same tape, the picture may become
distorted during playback and the time code may not be written correctly.
• A tape recorded in LP mode on other digital equipment may produce the
mosaic-like noise and the sound may become distorted when playing back on
this camcorder.
E
• A tape recorded in LP or LP mode on this camcorder may produce the
mosaic-like noise and the sound may become distorted when playing back on
other digital equipment.
About SP and LP modes
• The image quality of recordings done in SP or LP modes will be lower
than that of those done in SP or LP modes.
• A cassette recorded in SP or LP mode cannot be played back on a
camcorder not equipped with that mode.
• The recording mode might not appear in the display correctly if you switch to
SP or LP while the camcorder is connected to another digital video device.
• When the recording mode is changed to SP or LP, the camcorder modifies
the image for appropriate recording in that mode.
• You might not be able to do DV dubbing correctly with the camcorder set to
SP or LP mode.
• You cannot transfer images recorded in SP or LP mode to a PC (as of
January 2002).
16:9 (Wide screen TV recording)
Produces images in the 16:9 format for
playback on wide screen TVs.
TAPE
CAMERA
+
CAM.SET UP
16:9••••••••OFF
(
40)
To switch 16:9 to ON, open the menu and select CAM.SET UP. Then
select 16:9, set it to ON and close the menu.
Notes:
• 1“6:9”is shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the multi-image screen when setting the 16:9 mode on.
• If you play back a recording made for 16:9 on a normal TV screen, the image
will appear to be vertically “squashed”(compressed).
• If you connect the camcorder to a TV with an S1 terminal or the Video ID-1
system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirmation/Warning beeps
E
The camcorders’ short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camcorder operations such as when you
turn the camcorder on, during the self-timer countdown, right before the
camcorders’ automatic shut-off, and also upon any unusual condition of the
camcorder. Beeps are not recorded on the tape.
PLAY
(VCR)
PLAY
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
(VCR)
,
,
,
SYSTEM
BEEP••••••••ON
(
40)
To turn the beep off, open the menu and select SYSTEM. Then select
BEEP, set it to OFF and close the menu.
Demonstration mode
You can see a demonstration of the camcorders’ main features. To see the
demonstration, do either of the following:
• With no cassette or memory card inserted, turn the DEMO MODE on in the
TAPE CAMERA menu or CARD CAMERA menu and close the menu.
• Leave the camcorder with no cassette or memory card inserted for five minutes
after turning it on.
TAPE
CAMERA
CARD
CAMERA
+
+
,
DISP.SET UP
DEMO MODE••••ON
(
40)
To turn the demonstration mode off, open the menu and select DISP.
SET UP. Then select DEMO MODE, set it to OFF and close the menu.
Note:
• To cancel the demo mode once it has begun: push any button, turn off the power,
load a cassette or insert a memory card.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming
Zoom in
E
Zoom out
22× optical zoom/
18× optical zoom
The camcorders’ zoom lens allows you to choose the best picture angle for each
scene:
• Move the zoom control towards W to zoom out to wide-angle.
• Move it towards T to zoom in to telephoto.
You can also control the speed of zooming:
• Move the control slightly to zoom slowly.
• Move it farther to zoom more quickly. (The farther you move the zoom control,
the faster the zoom speed.)
The T and W buttons on the wireless controller adjust the picture angle, but not
the zoom speed.
88×/440× digital zoom (card 88×)/
72×/360× digital zoom (card 72×)
Magnifies the camcorders’ zoom range by up to 20 × in TAPE CAMERA mode.
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 440× magnification — the camcorder automatically switches
between optical zooming (up to 22×) and digital zooming (22× to 88× or 22× to
440×).
TAPE
CAMERA
CARD
CAMERA
+
+
,
CAM.SET UP
D.ZOOM••••••88×
(
40)
To change the digital zoom, open the menu and select CAM.SET UP.
Then select D.ZOOM, set it to OFF or 440× and close the menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
E
Magnifies the camcorders’ zoom range by up to 20 × in TAPE CAMERA mode.
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 360× magnification — the camcorder automatically switches
between optical zooming (up to 18×) and digital zooming (18× to 72× or 18× to
360×).
TAPE
CAMERA
CARD
CAMERA
+
+
,
CAM.SET UP
D.ZOOM••••••72×
(
40)
To change the digital zoom, open the menu and select CAM.SET UP.
Then select D.ZOOM, set it to OFF or 360× and close the menu.
Notes:
• When zooming, as a rule, keep at least 3 ft 33/8 in (1 m) between you and your
subject. However when the zoom is at the wide-angle position, you can focus
on a subject as close as 3/8 in (1 cm).
• Image resolution is slightly lower when the magnification is greater than
22×/18×.
• You cannot use digital zoom in the Night recording program.
• You cannot use digital zoom when the multi-image screen is set. The display
becomes “––.”–
• The zoom indicator appears for 4 seconds. When the digital zoom is set to
88×/72×, the zoom indicator extends (light blue). When the digital zoom is set
to 440×/360× zoom, the zoom indicator extends again (a darker blue).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LCD Screen
Opening and closing the LCD screen
E
Slide the LCD panel OPEN button and
open the panel by pulling it away from
the camcorder. This automatically
switches the LCD screen on and the
viewfinder off. To close the LCD
panel, press the upper right corner until
it clicks securely closed. When you
close the LCD panel, the LCD screen
automatically switches off and the
viewfinder switches back on.
Changing the angle of the LCD screen
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
180°
the LCD screen so that faces in the
direction of the lens ( 29).
90°
90°
You can also push the panel flat
against the camcorder until it is flush
with the side, with the screen facing
outwards.
Notes:
• Avoid touching the LCD screen when moving the LCD panel.
• Do not hold the camcorder by the LCD panel or the viewfinder.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
• Make sure you open the LCD panel at 90°, before attempting to rotate it.
• Always rotate the LCD panel vertically into place, before closing it or pushing
it flat against the side of the camcorder.
E
• Always fully close the LCD panel until it clicks securely.
• Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight
outdoors or in a window. Doing so could cause damage.
• Bright light falling on the LCD screen may cause glare that makes it difficult
for you to view the image. In this case, switch to using the viewfinder. You are
also able to adjust the brightness of the screen (see “Adjusting the LCD screen”
below).
Adjusting the LCD screen
You can adjust the brightness of the LCD screen.
PLAY
(VCR)
PLAY
(VCR)
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
,
,
,
–
BRIGHTNESS••
+
DISP.SET UP
(
40)
Open the menu and select DISP.SET UP from the menu. Then select
BRIGHTNESS, adjust the level with the selector dial and close the
menu.
A bar showing the level appears in the display.
• Turn the selector dial up to make the display brighter.
• Turn the selector dial down to make the display darker.
Notes:
• The camcorder will remember your brightness setting even after you turn it off.
• The brightness of the LCD does not affect that of the recorded images or the
viewfinder.
About the LCD Screen
The LCD screen built into this camcorder is a high precision product.
However, small black dots or bright points of light (red, blue or green) may
appear constantly on the LCD screen. This is not a malfunction of the LCD screen
and they are not recorded on the tape. (Effective dots: more than 99.99%)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Allowing the subject to monitor recording
E
When you turn the LCD panel so that it
faces the same direction as the lens,
you can watch yourself during
recording or let your subject monitor
recording. The viewfinder is also
activated when the panel is in this
position. (Adjusting the viewfinder,
131)
• You can choose the display style,
reversed (mirror on) or not (mirror
off). The recording itself is
unaffected regardless of which one
you choose.
TAPE
CAMERA
CARD
CAMERA
+
+
,
DISP.SET UP
MIRROR••••••ON
(
40)
To turn the mirror mode off, open the menu and select DISP.SET UP.
Then select MIRROR, set it to OFF and close the menu.
The indicators that appear in the LCD display when MIRROR is
turned on:
TAPE CAMERA mode
REC
REC PAUSE
EJECT
CARD CAMERA mode
No card
Recording to a
memory card
Self-timer (
72)
CARD CAMERA mode
Recording to a memory card
• These and all other indicators appear normally in the viewfinder.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back a Cassette
E
CARD
TAPE
REC
REC
FOCUS
AE SHIFT
SEARCH
SEARCH
SLIDE SHOW
R
E
W
O
P
A
R
E
M
A
C
F
F
O
PLAY(VCR)
You can use the LCD screen for instant, on-the-spot playback. The camcorder also
plays back the sound track via the built-in speaker ( 33).
• When you play back a tape, you can also close the LCD panel with its screen
side facing up.
• When your’e using the viewfinder to view playback, close the LCD panel.
To play back your recordings on a TV, see p. 34.
To use the wireless controller, see p. 49.
Note:
• To avoid accidental recording, make sure that you slide the tab on the cassette
so that it exposes the hole (the switch position is usually labeled SAVE or
ERASE OFF).
1. Attach a power source and turn the POWER switch to PLAY
(VCR).
• The power indicator lights up.
2. Make sure the TAPE/CARD switch is set to TAPE.
3. Load the cassette.
e
4. Press the (play) button to start playback.
• To end playback, press the 3 (stop) button.
• To wind the tape forwards, stop playback and press the 1 (fast forward)
button.
• To wind the tape backwards, stop playback and press the ` (rewind)
button.
• If the playback picture is rough (mosaic-like noise), clean the video heads
using a Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available digital video head cleaning cassette.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Other playback modes
E
Playback pause
Press the a (pause) button. To resume normal playback, press it again, or press
the e (play) button. The camcorder automatically goes into stop mode after about
5 minutes’playback pause.
Fast forward playback
To play back the recording at about 9.5 times normal speed, press and hold the
1 (fast forward) button during normal playback or press and hold the 1 (fast
forward) button during normal fast forward.
Rewind playback
For reverse playback at about 9.5 times normal speed, press and hold the
` (rewind) button during normal playback or press and hold the ` (rewind)
button during normal rewind.
Special playback
Frame Advance
To play back frame by frame, press the
+/ ae button repeatedly during
playback pause.
Press and hold to play back continuous
frame advance.
REW
PLAY
STOP
SLOW
FF
– /
+ /
PAUSE
×2
Frame Reverse
To play back in reverse frame by frame,
press the –/ 4a button repeatedly during
playback pause.
Press and hold to play back continuous frame reverse.
Slow Forward Playback
To play back at about 1/3 normal speed, press the SLOW M button during normal
playback.
Press the PLAY e button to return to normal playback.
Slow Reverse Playback
To play back in reverse at about 1/3 normal speed, press the –/ 4a button and
then the SLOW M button during normal playback.
Press the PLAY e button to return to normal playback.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Reverse Playback
To play back in reverse at normal speed, press the –/ 4a button during normal
forward playback.
E
Press the PLAY e button to return to normal forward playback.
• The camcorder automatically goes into stop mode after about 2 minutes of
paused reverse playback.
Forward ×2 Playback
Press the ×2 button during normal playback.
Press the PLAY e button to return to normal playback.
Reverse ×2 Playback
Press the –/ 4a button and then the ×2 button during normal playback.
Press the PLAY e button to return to normal playback.
Notes:
• Mosaic-like noise appears on the screen during some of the special playback modes.
• Theres’ no audio during special playback.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-in speaker
E
The camcorder has a built-in speaker so you can review the sound track alongside
the picture when you’re using the LCD screen to play back a tape. The built-in
speaker is monaural.
Adjust the speaker volume by turning the selector dial.
• Turn the selector dial up to increase the volume, and down to lower the volume.
• A bar appears in the display to indicate the current volume. It disappears in 4
seconds.
• You can turn off the volume completely by turning the selector dial down until
OFF appears.
Notes:
• Sometimes audio may sound distorted when the volume is turned up high. If
this happens, turn down the volume.
• The speaker turns off when the camcorder is set to any mode other than TAPE
PLAY (VCR) mode.
Using the headphones
• You can also use the headphones to monitor the sound track. Change the setting
of the AV/headphones terminal through the menu ( 34).
• You can adjust the headphone volume separately from the built-in speaker,
either during TAPE PLAY (VCR) mode or TAPE CAMERA mode. The volume
level is the same regardless of mode.
• The levels you adjust for the built-in speaker and headphones are memorized
separately. The camcorder remembers your levels even if you turn the
camcorder off and back on again.
• The speaker turns off when you use headphones.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections for Playback on a TV Screen
You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder ( 13).
Power off all devices before starting the connections.
E
See your TV or VCR instruction manual for further details.
Switching the AV/headphone terminal
AV
MIC
Through the menu, the camcorders’ AV/headphone terminal can be switched to
function as either the AV terminal or the headphone terminal.
PLAY
(VCR)
PLAY
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
(VCR)
,
,
,
VCR SET UP
AV/PHONES•••AV
(
40)
Open the menu and select VCR SET UP. Then select AV/PHONES and set it
to AV or PHONES and close the menu.
• When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
• Make sure you switch the AV/headphones terminal to PHONES before using
headphones. If the AV/headphones terminal is not switched to PHONES before
you use the headphones, noise will come out from the headphones.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
If your TV (or VCR) has an S (S1) -video input terminal
E
For higher picture quality, we recommend playing back recordings on a TV with
an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal,
recordings made in the 16:9 mode for wide screen TVs will automatically play
back in wide screen mode on the TV screen.
S
INPUT
S(S1)-VIDEO
S-150 S-video Cable
VIDEO
AUDIO
L
AV
STV-250N Stereo Video Cable
R
MIC
• Use the optional S-150 S-video Cable to connect the S-video terminals. Use the
STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the
white plug to the white AUDIO terminal L (left). Connect the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on the
VCR to LINE.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
If your TV (or VCR) has audio/video input terminals
E
INPUT
VIDEO
STV-250N
Stereo Video Cable
AV
AUDIO
L
R
MIC
• Connect the camcorder using the STV-250N Stereo Video Cable. Connect the
white plug to the white audio terminal L (left). Connect the red plug to the red
audio terminal R (right). Connect the yellow plug to the yellow video terminal
VIDEO.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on the
VCR to LINE.
Notes:
• If you are going to use the TV as a monitor while you are shooting, remember
to keep the TV volume turned down as long as the camcorders’ audio terminals
are connected. If the sound from the TV speakers is picked up by the
microphone, an unpleasant high-pitched squeal, called feedback, may be
produced.
• For TVs having the Video ID-1 system:
If you connect the camera to the TVs’ S terminal or video in terminal,
recordings made in the 16:9 mode for wide screen TVs will automatically play
back in wide screen mode on the TV screen.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips for Making Better Videos
Holding the camcorder
E
For maximum stability, grip the camcorder in your right
hand and keep your right elbow pressed against your body.
If necessary support the camcorder with your left hand.
With practice, you will be able to operate the controls by
touch, without taking your eye off the action.
Using a tripod
To prevent any unwanted movement, you can mount the
camcorder on a tripod, (or any flat surface at a suitable
height) and operate it with the wireless controller.
• When you are using a tripod, be careful not to leave the
viewfinder exposed to bright sunlight or it may melt.
(The light is concentrated by the viewfinder lens.)
• Make sure that the fastening screw of the tripod is no
1
longer than /4 inch (5.5 mm), or it will damage the
camcorder.
Composition
The most important element in the scene does not have to
be in the center. For a more interesting picture, try to
position your subject so it is slightly to one side. Leave
some space on the side of the frame that the subject is
facing or moving towards.
Dont’ cut off the top of the subjects’ head, and dont’ cut
people off at the neck, hips or knees (move a little bit
above or below).
Watch out for distracting objects in the background.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture angle
E
Instead of zooming while recording, try
to choose your picture angle before you
begin. A good way to tell a story with
video is to begin with a long shot that
establishes the situation, and then move
in with medium shots and close-ups to
show the details. Remember to change
your viewpoint for each shot.
Long shot
Medium shot
Close-up
Remember that any camcorder
movement or change in picture angle
should have a definite purpose. Avoid
unnecessary or half-hearted
movements.
Camcorder moves
Use pans to record a landscape or
follow a moving subject. Decide the
area you want to cover and stand facing
the end of your panning angle. Without
moving your feet, turn your waist to the
starting position. Start recording, and
after a few seconds begin to turn slowly
from the waist. Hold the final image for
a few seconds before you stop
Pan
recording.
Tilt the camcorder up to exaggerate the
height of the subject. Tilt down from
the top of a building, for example, as an
introduction to subjects at the bottom.
Tilt
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching and Reviewing While Recording
Record search
E
When the camcorder is in record pause
mode, you can use record search to
play the tape forwards or backwards to
REC
SEARCH
REC
SEARCH
find the point where you want to start
or resume recording. This is useful
when you want to add a new scene to a
previously used cassette. By using
record search, you can ensure a smooth,
noise-free join between the new scene
and the old one.
TAPE
CAMERA
+
1. Press and hold the REC SEARCH + or – button on the camcorder
while you check the picture in the display.
• The + button plays the recording forwards and the –button plays it
backwards.
2. Release the button when you find the point where you want to start
recording.
• The camcorder returns to record pause mode.
Record review
When the camcorder is in record pause mode, you can use record review to play
back the last few seconds of your recording and then return automatically to
record pause mode. You can quickly make sure that a scene has recorded properly
and then go on to shoot the next scene, without producing any noise in the picture.
TAPE
CAMERA
+
1. Press and release the c (record review) button while you check the
picture in the display.
• The camcorder rewinds the tape, plays back the last few seconds, and returns
to record pause mode.
Note:
• Noise may appear on the screen when you play the tape backwards.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Many of the camcorders’ advanced functions are selected from menus which
appear in the display.
E
There are 4 main menus:
CAM. MENU Camera menu
VCR MENU VCR menu
C.CAM. MENU Card camera menu
C.PLAY MENU Card play menu
(
(
(
(
42)
43)
45)
46)
TAPE
CAMERA
2 CAM. MENU
+
CAM.MENU
SEL.SETSET
MENUCLOSE
R
E
W
O
P
CARD MIX
CAM.SET UP
VCR SET UP
DISP.SET UP
SYSTEM
CARD
TAPE
CAMERA
OFF
PLAY(VCR)
RETURN
PLAY
(VCR)
TAPE
2 VCR MENU
+
VCR MENU
SEL.SETSET
MENUCLOSE
R
E
W
O
P
VCR SET UP
CARD SET UP
CARD OPER.
DISP.SET UP
SYSTEM
CARD
TAPE
CAMERA
OFF
PLAY(VCR)
RETURN
CARD
CAMERA
2 C. CAM. MENU
+
+
C.CAM MENU
SEL.SETSET
MENUCLOSE
R
E
W
O
P
CAM.SET UP
CARD SET UP
VCR SET UP
DISP.SET UP
SYSTEM
CARD
TAPE
RA
E
M
A
C
F
F
O
PLAY(VCR)
RETURN
PLAY
(VCR)
CARD
2 C. PLAY MENU
C.PLAY MENU
SEL.SETSET
MENUCLOSE
R
E
W
O
P
CARD OPER.
VCR SET UP
DISP.SET UP
SYSTEM
CARD
TAPE
CAMERA
F
F
O
RETURN
PLAY(VCR)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting from the Menus
E
2, 11
MENU
TV
SCREEN
3-10
SET
MENU
1. Turn the POWER switch and the TAPE/CARD switch to the
desired settings.
2. Press the MENU button to open the menu.
• One of the main menus appears, according to the settings of the
TAPE/CARD switch and the POWER switch.
3. Turn the selector dial and move the arrow to the desired submenu.
4. Press the selector dial in to select.
• The submenu appears.
5. Turn the selector dial and move the arrow to the desired function.
6. Press the selector dial in to select.
• The function and its settings only appear.
7. Turn the selector dial and move the arrow to the desired setting.
• If you are setting a function other than the white balance or shutter speed,
the function will be set if you skip to step 11.
8. Press the selector dial in to select.
• The function is set and you return to the submenu.
b
9. Turn the selector dial and move the arrow to
RETURN.
10.Press the selector dial in to select.
• You return to the main menu.
11.Press the MENU button.
• The main menu disappears.
Notes:
• Pressing the MENU button at any time closes the menu.
• Selecting b RETURN takes you back one menu, or closes the main menu.
• Items that are unavailable, due to the tape or card situation or the settings of
other menu items, appear in purple.
• You may often find it convenient to use the wireless controller to move around
the menus. Press its MENU button to open/close the menu and use the arrow
keys in place of turning the selector dial. Push the SET button to select.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
• Pressing the start/stop button or the PHOTO button will close the menu and
start recording.
• You can display the menus on a connected TV screen by turning TV SCREEN
E
(
149) on through the menu or using the wireless controllers’ TV SCREEN
button. See p. 34 for TV hookup instructions.
List of Menus
Turn to the appropriate page for a detailed explanation of each function.
2
CAM. MENU
CAMERA
TAPE
Set the POWER switch to
and the TAPE/CARD switch to
.
There are 5 submenus within the CAM. MENU.
1 To card mix submenu
2 To camera set up submenu
3 To VCR set up submenu
4 To display set up submenu
5 To system submenu
6 Close main menu
CAM.MENU
SEL.SETSET
MENUCLOSE
1
CARD MIX
CAM.SET UP
VCR SET UP
DISP.SET UP
SYSTEM
2
4
6
3
5
RETURN
1 Card mix submenu
CARD MIX
101-0143
43/50
q Mix type.............................. 123
w Mix level............................. 123
MIX TYPE••••CARD CHROMA
MIX LEVEL•••
q
–
+
w
2 Camera set up submenu
CAM.SET UP
SEL.SETSET
MENUCLOSE
e Shutter speed......................... 77
r Digital zoom ......................... 25
t Image stabilizer..................... 58
y 16:9 effect............................. 23
e
SHUTTER•••••AUTO
D.ZOOM••••••88×
IMAGE S. ••ON
16:9••••••••OFF
WHITE BAL.••AUTO
RETURN
r
y
i
t
u
u White balance ....................... 80
i Return
42
Download from Www.Somanuals.com. All Manuals Search And Download.
E
3 VCR set up submenu
VCR SET UP
SEL.SETSET
MENUCLOSE
o Record mode......................... 22
! Wind screen .......................... 71
! Audio mode .......................... 70
! AV or headphones................. 34
! Return
o
!
!
REC MODE•••• SP
WIND SCREEN•OFF
AUDIO MODE••12bit
AV/PHONES•••AV
RETURN
!
!
4 Display set up submenu
DISP.SET UP
BRIGHTNESS••
SEL.SETSET
MENUCLOSE
! Brightness ............................. 28
! Mirror mode.......................... 29
! TV screen............................ 149
! Date/time display.................. 55
! Card access display............. 105
! Demo mode........................... 24
@ Return
–
+
!
!
MIRROR••••••ON
TV SCREEN•••ON
!
!
!
D/T DISPLAY•OFF
CARD ACCESS•ON
DEMO MODE•••ON
RETURN
!
@
5 System submenu
SYSTEM
SEL.SETSET
MENUCLOSE
@
@
Light-up buttons........ 52
Button light color ...... 52
@
@
@
BUTTONLIGHT•ON
LIGHT COLOR•TURQUOISE
@
@
@
WL.REMOTE•••
1
@ Wireless controller................ 50
@ Beep...................................... 24
@ Time zone/Daylight
BEEP••••••••ON
T.ZONE/DST••–––
D/TIME SET••–––.––,––––
––:–– ––
RETURN
@
saving time............................ 53
@ Date/time set......................... 55
@ Return
2
VCR MENU
PLAY
(VCR)
TAPE
Set the POWER switch to
and the TAPE/CARD switch to
.
There are 5 submenus within the VCR MENU.
1 To VCR set up submenu
2 To card set up submenu
3 To card operations submenu
4 To display set up submenu
5 To system submenu
6 Close main menu
VCR MENU
SEL.SETSET
MENUCLOSE
1
VCR SET UP
CARD SET UP
CARD OPER.
DISP.SET UP
SYSTEM
2
4
6
3
5
RETURN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR MENU, cont.
E
1 VCR set up submenu
VCR SET UP
SEL.SETSET
MENUCLOSE
q Record mode......................... 22
w Output channel.................... 101
e Audio dubbing...................... 98
r Wind screen .......................... 71
t Audio mode .......................... 70
y AV or headphones................. 34
u Analog-digital converter....... 93
i Return
q
e
t
u
REC MODE•••• SP
OUTPUT CH•••L/R
AUDIO DUB.••AUDIO IN
WIND SCREEN•–––
AUDIO MODE••12bit
AV/PHONES•••AV
AV DV OUT•••OFF
RETURN
w
r
y
i
2 Card set up submenu
CARD SET UP
SEL.SETSET
MENUCLOSE
o Image quality...................... 104
! File numbers ....................... 106
! Return
o
!
QUALITY•••••FINE
FILE NOS.•••CONTINUOUS
RETURN
!
3 Card operations submenu
CARD OPER.
SEL.SETSET
MENUCLOSE
! Copy from cassette to card. 124
! Return
[
COPY
RETURN
]
!
!
4 Display set up submenu
DISP.SET UP
SEL.SETSET
MENUCLOSE
+
! Brightness ............................. 28
! Displays .............................. 149
! 6-second auto date ................ 84
! Data code.............................. 83
! Date/time select .................... 82
! Card access display............. 105
@ Return
–
!
!
!
@
BRIGHTNESS••
DISPLAYS••••ON
!
!
!
6SEC.DATE•••OFF
DATA CODE•••DATE/TIME
D/TIME SEL.•DATE & TIME
CARD ACCESS•ON
RETURN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
E
5 System submenu
SYSTEM
SEL.SETSET
MENUCLOSE
@
@
Light-up buttons........ 52
Button light color ...... 52
@
@
@
BUTTONLIGHT•ON
LIGHT COLOR•GREEN
@
@
WL.REMOTE•••
BEEP••••••••ON
RETURN
1
@ Wireless controller................ 50
@ Beep...................................... 24
@ Return
2
C. CAM. MENU
CAMERA
CARD
Set the POWER switch to
and the TAPE/CARD switch to
.
There are 5 submenus within the C. CAM. MENU.
C.CAM MENU
SEL.SETSET
MENUCLOSE
1 To camera set up submenu
2 To card set up submenu
3 To VCR set up submenu
4 To display set up submenu
5 To system submenu
1
3
5
CAM.SET UP
CARD SET UP
VCR SET UP
DISP.SET UP
SYSTEM
2
4
6
RETURN
6 Close main menu
1 Camera set up submenu
q Shutter speed......................... 77
w Digital zoom ......................... 25
e Image stabilizer..................... 58
r White balance ....................... 80
t Return
CAM.SET UP
SEL.SETSET
MENUCLOSE
q
e
t
SHUTTER•••••AUTO
D.ZOOM••••••88×
IMAGE S. ••ON
WHITE BAL.••AUTO
RETURN
w
r
2 Card set up submenu
CARD SET UP
SEL.SETSET
MENUCLOSE
y Image quality...................... 104
u File numbers ....................... 106
i Shutter sound...................... 106
o Return
y
i
QUALITY•••••FINE
FILE NOS.•••CONTINUOUS
SHTR SOUND••ON
RETURN
u
o
45
Download from Www.Somanuals.com. All Manuals Search And Download.
C. CAM. MENU, cont.
E
3 VCR set up submenu
VCR SET UP
SEL.SETSET
MENUCLOSE
! AV or headphones................. 34
!
AV/PHONES•••AV
RETURN
4 Display set up submenu
DISP.SET UP
BRIGHTNESS••
SEL.SETSET
MENUCLOSE
! Brightness ............................. 28
! Mirror mode.......................... 29
! TV screen............................ 149
! Date/time display.................. 55
! Card access display............. 105
! Demo mode........................... 24
! Return
–
+
!
!
!
!
MIRROR••••••ON
TV SCREEN•••ON
!
!
!
D/T DISPLAY•OFF
CARD ACCESS•ON
DEMO MODE•••ON
RETURN
5 System submenu
!
!
Light-up buttons........ 52
Button light color ...... 52
SYSTEM
SEL.SETSET
MENUCLOSE
!
@
@
BUTTONLIGHT•ON
LIGHT COLOR•BLUE
!
@
@
@ Wireless controller................ 50
@ Beep...................................... 24
@ Time zone/Daylight saving
time ....................................... 53
@ Date/time set......................... 55
@ Return
WL.REMOTE•••
1
BEEP••••••••ON
T.ZONE/DST••–––
D/TIME SET••–––.––,––––
––:–– ––
RETURN
@
2
C. PLAY MENU
PLAY
(VCR)
CARD
Set the POWER switch to
and the TAPE/CARD switch to
.
There are 4 submenus within the C. PLAY MENU.
C.PLAY MENU
SEL.SETSET
MENUCLOSE
1 To card operations submenu
2 To VCR set up submenu
3 To display set up submenu
4 To system submenu
1
3
5
CARD OPER.
VCR SET UP
DISP.SET UP
SYSTEM
2
4
RETURN
5 Close main menu
46
Download from Www.Somanuals.com. All Manuals Search And Download.
E
1-1 Card operations submenu (when playing back a single image)
q Copy from card to cassette. 125
CARD OPER.
SEL.SETSET
MENUCLOSE
w Erase all print marks........... 118
e Image erase ......................... 119
r Format................................. 126
t Return
[
COPY
]
q
e
t
PRINT MARKS ALL ERASE
IMAGE ERASE
FORMAT
w
r
RETURN
1-2 Card operations submenu (when displaying an index screen)
CARD OPER.
SEL.SETSET
MENUCLOSE
y To image protect ................ 116
u To print mark ...................... 117
i Return
y
i
PROTECT
PRINT MARK
RETURN
u
2 VCR set up submenu
o Record mode......................... 22
! AV or headphones................. 34
! Return
VCR SET UP
SEL.SETSET
MENUCLOSE
o
!
REC MODE••••SP
AV/PHONES•••AV
RETURN
!
3 Display set up submenu
DISP.SET UP
BRIGHTNESS••
SEL.SETSET
MENUCLOSE
! Brightness ............................. 28
! Displays .............................. 149
! Date/time select .................... 82
! Card access display............. 105
! Return
–
+
!
!
!
DISPLAYS••••ON
!
!
D/TIME SEL.•DATE & TIME
CARD ACCESS•ON
RETURN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
C. PLAY MENU, cont.
E
4 System submenu
SYSTEM
SEL.SETSET
MENUCLOSE
!
!
Light-up buttons........ 52
Button light color ...... 52
!
!
@
BUTTONLIGHT•ON
LIGHT COLOR•YELLOW
!
@
WL.REMOTE•••
BEEP••••••••ON
RETURN
1
! Wireless controller................ 50
@ Beep...................................... 24
@ Return
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Wireless Controller
The supplied wireless controller can
operate the camcorder from a distance
of up to 16 feet (5 m). Point it at the
camcorders’ remote sensor while you
press the buttons.
E
There are some functions that cannot be
operated without the wireless
controller:
16ft
• Special playback ( 31)
• Photo/date search ( 85)
• Zero set memory ( 86)
• Audio mix ( 100)
• Dubbing from a digital video
equipment ( 88)
• Analog Line-in ( 90)
• AV insert ( 94)
• Audio dubbing ( 97)
Inserting batteries
Insert two AA batteries, following the
= and - markings. Be careful not to
reverse the polarity of the batteries.
Notes:
• When using the wireless controller in brightly lit places or outdoors, the
effective range will be less.
• The camcorder may have difficulty picking up the remote control signals at
extremely close range.
• Do not leave the controller exposed to direct sunlight, or in hot or humid places.
• When the batteries run out, replace them both together.
• If the wireless controller doesnt’ work, see p. 51.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
When Operating 2 Canon DV Camcorders (Remote Sensor Mode)
E
To prevent interference from other
ZOOM
Canon wireless controllers being used
W
T
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camcorder have to be
set to the same mode in order to be
REMOTE SET
compatible.
The wireless controller and the camcorder have been preset to mode 1. If you
change the mode on the camcorder, be sure to change the mode on the wireless
controller to the same mode.
PLAY
(VCR)
PLAY
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
(VCR)
,
,
,
A 1 : Mode 1
A 2 : Mode 2
OFFB : Sensor off
SYSTEM
WL.REMOTE•••
1
(
40)
To turn the remote sensor off:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it
to OFF B and close the menu.
• B appears in the display.
To change the mode...
...on the camcorder:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it
to A 1 or A 2 and close the menu.
• The selected mode will appear on the display for 4 seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM W button for mode 1 or the ZOOM
T button for mode 2. Continue to press simultaneously for over 2
seconds.
• Be sure to set the wireless controller to the same mode as the camcorder.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
If your wireless controller isn’t working:
Make sure the camcorder and the wireless controller are both set to the same
mode. Check the mode the camcorder is set to by pushing any button other than
the REMOTE SET button on the wireless controller. The camcorders’ mode
appears in purple for about 4 seconds. Set the wireless controllers’ mode
accordingly by pressing the aforementioned button combinations. If the wireless
controller still doesnt’ work, change the batteries.
E
Notes:
• The mode the camcorder is set to also appears for 4 seconds when you turn the
power on.
• When you replace the batteries, the wireless controller returns to mode 1.
Change the mode again if necessary.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Selectable Color Light-up Buttons
E
MENU
The clear buttons above the LCD panel light up when the camcorders’ power is
on, or only when one of the buttons is pressed, making it possible to play back
cassettes when in dark surroundings. You can also change the color in which they
light up to green, orange, blue, yellow, turquoise (greenish blue) or purple.
Turning the buttons off
PLAY
(VCR)
PLAY
(VCR)
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
,
,
,
SYSTEM
BUTTONLIGHT•ON
(
40)
To change the setting, open the menu and select SYSTEM. Then select
BUTTONLIGHT and set it to PUSH ON or OFF and close the menu.
• ON: The buttons remain lit in the indicated color. When one of the buttons is
pressed, all the buttons simultaneously change color. When the button is
released, they return to the original color.
• PUSH ON: Buttons light up only while one of them is pressed. All the buttons
simultaneously lights up in the indicated color. When the button is released,
they turn off again after a few seconds.
• OFF: Buttons do not light up.
Changing the color of the buttons
PLAY
(VCR)
PLAY
(VCR)
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
,
,
,
SYSTEM
LIGHT COLOR•TURQUOISE
(
40)
To change the color, open the menu and select SYSTEM. Then select LIGHT
COLOR, set it to the desired color and close the menu.
Note:
• You cannot change LIGHT COLOR when BUTTONLIGHT is set to OFF.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Date and Time
E
MENU
The date and/or time display forms part of the data code. You can choose to
display or hide it during playback ( 82).
Set the date and time display when you first start using your camcorder. Install the
backup battery before you begin ( 135).
• Before you start setting the date and time, select your home time zone from the
menu.
Setting the time zone/daylight saving time
TAPE
CAMERA
CARD
CAMERA
+
+
,
SYSTEM
T.ZONE/DST••N.Y.
(
40)
1. Open the menu and select SYSTEM.
2. Select T.ZONE/DST.
• The time zone display appears on the screen.
• Your camcorders’ time zone is factory-preset to New York. If you are at
another time zone, select your time zone first and daylight saving time
(DST) setting if necessary.
3. Move up or down the list of time zones with the selector dial.
Select the option that represents your time zone.
• If you are now in daylight saving time, select the time zone with the
daylight saving time mark C next to the area.
4. Close the menu.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
E
16
1
4
19
2
18
24
20
3
17
6
10
7
9
15
14
8
5
21
23
12
22
11
13
14 15 16 17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
9
10 11 12 13
No.
No.
Time zone
LONDON
PARIS
Time zone
WELLGTN (Wellington)
SAMOA
CAIRO
HONOLU. (Honolulu)
ANCHOR. (Anchorage)
L.A. (Los Angeles)
DENVER
MOSCOW
DUBAI
KARACHI
DACCA
CHICAGO
BANGKOK
H. KONG (Hong Kong)
TOKYO
N.Y. (New York)
CARACAS
RIO (Rio de Janeiro)
SYDNEY
SOLOMON
FERNAN. (Fernando de Noronha)
AZORES
Notes:
• After you have selected your time zone and set the date and time, when you
travel to another time zone, there is no need to reset the date and time. Just set
the time zone to your destination and the camcorders’ clock will automatically
change to display the correct time for your destination.
• The camcorder automatically accounts for the number of days in a month and
leap year.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
E
After you set the date and time, the date/time and home time zone will be
displayed for about 4 seconds each time you turn the power on.
TAPE
CAMERA
CARD
CAMERA
+
+
,
SYSTEM
D/TIME SET••JAN. 1,2002
12:00 AM
(
40)
1. Open the menu and select SYSTEM.
2. Select D/TIME SET.
• The year display starts to flash.
3. Turn the selector dial up and down to change the year. Press the
dial in to move to another part of the display.
• Once you move from the year, the next part of the display starts flashing.
4. Set the month, day, hours, and minutes in the same way.
5. Press the MENU button when finished, and to start the clock.
Notes:
• To make a change to part of the date and time, press the selector dial in at step
3 to move to the part to be changed. Turn the dial to make the change, then
close the menu.
• The date can be set to any year between 2002 and 2030.
• If you press the MENU button in the middle of setting the date and time, you
leave the menu, and the clock starts.
• If you press the selector dial in after setting the minutes you can set the date
and time again from the start.
Date and time display
You can choose to display or hide the date and time display during recording.
When the date and time display is set to ON, the date and time show in the lower
left-hand corner of the display but the time zone disappears in about 4 seconds.
The large, 4-second display will no longer appear when you turn on the power. It
is not automatically superimposed on your recordings.
TAPE
CAMERA
CARD
CAMERA
+
+
,
DISP.SET UP
D/T DISPLAY•OFF
(
40)
To turn it on, open the menu and select DISP.SET UP. Then select D/T
DISPLAY, set it to ON and close the menu.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Still Pictures to a Cassette
To take still images on a memory card, see p. 107.
E
PHOTO
P
H
O
T
O
P
H
O
T
O
You can record still pictures like a photograph. The camcorder records the picture
and sound to tape for several seconds. The exposure is automatically adjusted.
Copy still photos automatically to a memory card ( 124) for transfer to a PC for
image enhancement and printout. Also, starting your shooting with a still photo
makes it easy to find the beginning again later with the Photo Search function
(
85).
You can take a still picture at any time during regular video recording, or you can
put the camcorder into record pause mode first, then take a still picture.
TAPE
CAMERA
+
During record mode
Press the PHOTO button fully down and the still picture will be taken
immediately.
• The camcorder takes the image immediately, and then records the “photo”to the
tape for approximately 6 seconds (
8 seconds in SP or LP recording
mode). During this time the camcorder also records the sound, and the display
shows the still picture.
• A counter display appears, and counts up as the camcorder records the picture.
• The camcorder returns to record pause mode.
During record pause mode
1. Press the PHOTO button halfway down and hold it:
• P“HOTO”flashes at the bottom right of display.
• Exposure is locked.
• During autofocus flashes white in the display as the camcorder adjusts the
F
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still picture.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the subject is unsuitable for autofocus ( 142), the camcorder may not
be able to focus, and may continue to flash white in the display. Continue
to hold the PHOTO button halfway down, then adjust the focus manually
with the selector dial.
E
F
• If you are using manual focus ( 79), the mark starts as a continuous
F
green mark. Focus with the selector dial.
2. Press the PHOTO button fully down to take the still picture.
• The camcorder takes the image immediately, and then records the “photo”to
the tape for approximately 6 seconds*. During this time the camcorder also
records the sound, and the display shows the still picture.
• A counter display appears, and counts up as the camcorder records the
picture. disappears from the display.
F
• The camcorder returns to record pause mode.
Notes:
• The camcorder automatically returns to record pause mode after recording a
still image for approximately 6 seconds*. If you turn the POWER switch to
OFF during that time, the camcorder will respond only after recording is
complete.
• The wireless controllers’ PHOTO button has no half-way setting. Press the
button fully and the camcorder immediately takes the “photo”.
• Only take “photos”where it is bright enough to see the image in the display.
*
8 seconds in SP or LP recording mode.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Image Stabilizer Off
E
MENU
With most camcorders, even the slightest hand movements will be noticeable
during telephoto recording. However, the ZR50 MC/ZR45 MCs’ image stabilizer
allows you to obtain steady recordings even at high magnification.
TAPE
CAMERA
CARD
CAMERA
+
+
,
CAM.SET UP
IMAGE S.
••ON
(
40)
To turn the image stabilizer off, open the menu and select CAM.SET
UP. Then select IMAGE S. i, set it to OFF and close the menu.
• The i mark disappears from the display when the stabilizer is off.
• The image stabilizer cannot be turned off when the program selector is set to
the [ (Easy Recording) position.
Notes:
• Keep the image stabilizer turned off when the camcorder is mounted on a
tripod.
• The image stabilizer is designed to deal with a normal degree of camcorder
shake.
• The image stabilizer is not as effective as usual during the Low Light and Night
mode.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Various Recording Programs
E
P
The camcorder provides you with a choice of 8 recording programs. They use
different combinations of camcorder settings in order to adjust the exposure and
other functions to match the recording situation.
• For simple point-and-shoot operation, select the Easy Recording program. Slide
the program selector to the [ position.
• For normal shooting conditions, slide the program selector to Q (program AE)
mode. Open the program menu and select AUTO ( 60).
• For various other recording conditions, the camcorder has 6 more specialized
AE (auto exposure) programs.
Availability of functions in each recording program
Position of
program selector
P
P
Recording
Program
Sand & Low
Snow Light
[
(Easy
Auto Sports Portrait Spotlight
Night
Recording)
Digital Zoom
Shutter speed
Focus
h
h
i
A
h
h
h
A
White balance
AE shift
h
i
h
i
Image stabilizer
(ON/OFF)
ON
h
Digital effects
16:9
*
h
i
i
i
h
h
h
Card mix
: Available
: Not available
A : Automatic function only
h
i
* You cannot use the multi-image screen in the Night recording program.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the program AE mode
E
TAPE
CAMERA
CARD
CAMERA
+
+
,
1. Slide the program selector to Q (program AE) mode.
2. Press the selector dial in to display the program menu.
3. Turn the selector dial to move the arrow up or down the display.
4. Press the selector dial in to select the desired program.
• The program will appear in the display.
Notes:
• The name of your selected recording program appears constantly on the left of
the display, with the exception of Auto, which is displayed and then disappears
after 4 seconds.
• Avoid changing programs during recording as the brightness of the image may
change suddenly.
• If you switch the camcorder from the [ program to the Q program, the
camcorder returns to the Auto program.
• When recording in dark places a bright light in the
scene may cause a vertical light bar (“smear”) to
appear. This is a normal feature of camcorders.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Recording
E
The simplest way to use the camcorder is with
the program selector set to the [ position. The
camcorder will take care of focus, exposure and
other adjustments, leaving you free to point and
shoot.
[
Auto
This is the same as the Easy Recording program,
except that you now have the option of using
any of the camcorders’ manual functions.
AUTO
Sports
This program is useful for recording high-speed
sports scenes in brightly lit conditions. Normal
playback will be slightly jerky, but you will get
clear images which can be analyzed frame by
frame during slow or paused playback.
SPORTS
Portrait
Use this program outdoors to make subjects
stand out from a softened foreground and
background. It works well for still-lifes and
close-ups. The effect is most noticeable when
the zoom position is between the middle range
and the telephoto end. Focus manually for
maximum accuracy, and be careful when
recording action scenes, as this program may
cause fast moving objects to shudder.
PORTRAIT
Spotlight
This program is designed for recording spotlit
scenes, such as on a stage. The exposure is
automatically adjusted for glare-free recordings
of subjects lit by a concentrated light source.
SPOTLIGHT
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Sand & Snow
E
Use this program in places where the
SAND&SNOW
background is so bright that the subject appears
underexposed in the display — a sunny beach or
ski resort, for example. You may notice some
shudder when recording moving subjects.
Low Light
This program allows you to record in dimly lit
places. The shutter speed is fixed at a slow
speed. It is generally best used for close-ups of
slow or stationary subjects, as moving subjects
may leave a trailing after-image. However, you
can take advantage of this to create special
effects, by rapid zooming or by panning along
with a moving subject. Picture quality will not
be as good as in normal lighting conditions, and
autofocus may not work as well as usual.
LOW LIGHT
Night
This program automatically adjusts the shutter
speed according to the brightness of the subject
even in dark places (night time, etc.) to shoot
subjects brightly in color. It is useful for
shooting subjects in dark places where lighting
cannot be used and for shooting night scenes.
When you record in very dark places:
• Moving subjects may leave a trailing after-
image.
NIGHT
• Though subjects can be shot brightly, picture
quality may not be as good as in normal
lighting.
• White points may appear in the display.
• Autofocus may not work as well as usual (in
this case, adjust the focus manually).
You cannot use the Night recording program in
CARD CAMERA mode.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Digital Effects
Use the camcorders’ digital effects for more interesting productions.
E
• Faders:
• Effects:
Start or end scenes on a tape with a fade to or from black
64). Fade Trigger, Vertical Wipe, Horizontal Wipe,
Mosaic Fade*
Add flavor to your recordings ( 65).
Art, Black and White, Sepia, Mosaic**
(
• Multi-image Screen: Divides the display to show 4, 9 or 16 still photos. Has 4
transition speed options: fast, moderate, slow and manual
(
68).
* Available during TAPE PLAY (VCR) mode only
** Available during TAPE CAMERA or TAPE PLAY (VCR) mode only
Availability of digital effects by mode
TAPE
CAMERA
TAPE
CARD
CARD
PHOTO
PLAY (VCR) CAMERA PLAY (VCR)
Faders
Effects
i
h
h
i
i
i
h
h
h
i
h
h
h
h
h
Multi-image
Screen
: Available
: Not available
h
i
• The types of digital effects you are able to use depends on the setting of the
TAPE/CARD switch, the POWER switch and the recording program.
Notes:
• When you do not want to use digital effects, press the DIGITAL EFFECTS
button and select D.EFFECT | from the digital effects menu. Press the
DIGITAL EFFECTS button to close the menu.
• The camcorder remembers your chosen digital effect setting until you change it.
• Digital effects can be selected but not operated on a blank blue screen (appears
in TAPE PLAY (VCR) mode). The display continues to flash.
• Digital effects operated during TAPE PLAY (VCR) mode are not recorded onto
the original tape.
• Digital effects can be added to another tape when dubbing using the AV out
terminal (TAPE PLAY (VCR) mode), but not the DV out terminal.
• You cannot operate digital effects while photo/date searching.
• If you slide the program selector to [ (Easy Recording) while the digital effect
display is flashing, it will disappear from the display and reappear when you
return to Q (program AE) mode.
• The digital effect display will flash for 2 seconds after setting, even if
DISPLAYS is set to OFF in the menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Faders
E
Fade Trigger (FADE-T)
When you start recording, the
scene gradually fades in
from a black screen.
When you
stop recording, it gradually
fades out.
Vertical Wipe (WIPE
)
When you start recording, the picture
begins as a thin vertical line in the
center of the screen
which gradually
expands sideways
When you end
a scene, the image is wiped
from both sides of the
screen.
until it fills the
whole of the screen.
Horizontal Wipe (WIPE
)
When you start recording, the picture
begins as a thin horizontal line in the
center of the screen
which gradually
expands upwards
When you end
a scene, the image is wiped
from the top and bottom of
screen.
and downwards
until it fills the
whole screen.
*
Mosaic Fade (M. FADE)
Blurs the image by enlarging the size of some pixels. The image appears
as increasingly large squares of color as it fades out, and smaller squares
when it fades in.
*Available during TAPE PLAY (VCR) mode only.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Effects
E
Sepia (SEPIA)
Makes a
monochrome
image with a
brownish tint.
Mosaic
(MOSAIC)*
Blurs the image by
enlarging the size
of some pixels.
Black and White
(BLK & WHT)
Makes the
image black and
white.
Art (ART)
Adds a paint-
like effect,
called
solarization, to
the image.
*Available during TAPE CAMERA or TAPE PLAY (VCR) mode only
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital effects can be set with the controls on the body of the camcorder or the
wireless controller. Pressing the ▲/▼ buttons on the wireless controller
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
E
MENU
DIGITAL
ON/OFF
SET
P
EFFECTS
D.EFFECTS
ON/OFF
Operating faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector
is set to Q.
PLAY
TAPE
CAMERA
TAPE
+
+
(VCR)
,
Select fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select FADER.
• FADE-T, WIPE , WIPE
PLAY (VCR) mode.
settings appear. M.FADE also appears in TAPE
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
66
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If you’re in TAPE CAMERA mode:
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
If you’re in TAPE PLAY (VCR) mode:
E
Fade in- Press the e (play) button.
Fade out- Press the a (pause) button.
Operating effects
Sound records/plays back normally.
When operating effects in TAPE CAMERA or CARD CAMERA mode, make
sure the program selector is set to
.
Q
PLAY
(VCR)
TAPE
CAMERA
TAPE
CARD
CAMERA
+
+
+
,
,
Select effect
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select EFFECT.
• ART, BLK&WHT, SEPIA, MOSAIC settings appear.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The menu disappears and the name of your selected setting flashes in the
display.
Effect on/off
5. If you’re in TAPE PLAY (VCR) mode, press the e (play) button.
6. Press the ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Multi-Image Screen
Divides your display image into 4, 9 or 16 smaller images with the Image Capture
feature. With this feature, the camcorder captures the current scene being shot or
replayed. Choose the transition speed — manual, fast (every 4 frames), moderate
(every 6 frames*) or slow (every 8 frames*) — at which to capture a moving
subject, such as a person playing tennis or golf. Sound is recorded normally.
* In Low Light mode: moderate (every 8 frames), slow (every 12 frames)
E
4 images
9 images
16 images
Operating the multi-image screen
When operating the multi-image screen in TAPE CAMERA or CARD CAMERA
mode, make sure the program selector is set to Q. When operating the multi-
image screen in TAPE CAMERA or CARD CAMERA mode, make sure the
program selector is set to Q and set to any program other than the Night recording
program.
In TAPE PLAY (VCR) mode, you can only operate the multi-image screen in the
following playback modes:
When M.S.SPEED is set to MANUAL: Still picture playback, slow forward/
reverse playback
When M.S.SPEED is set to FAST, MODERATE or SLOW: Still picture playback
PLAY
TAPE
CAMERA
TAPE
CARD
CAMERA
+
+
+
(VCR)
,
,
Select multi-image screen
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select MULTI-S.
• M.S. SPEED and M.S. SPLIT settings appear.
3. Select M.S. SPEED.
• MANUAL, FAST, MODERATE and SLOW settings appear.
4. Select the desired setting.
• You return to the digital effects menu.
5. Select MULTI-S again.
• M.S. SPEED and M.S. SPLIT settings appear.
6. Select M.S.SPLIT.
• 4, 9, 16 settings appear.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Select the desired setting.
• You return to the digital effects menu.
E
8. Press the DIGITAL EFFECTS button to close the menu.
• The digital effects menu disappears.
• MULTI-S flashes in the display.
Multi-image screen on/off
9. Push the ON/OFF button.
• MULTI-S stops flashing.
• Manual: As you press the ON/OFF button, scenes will be captured one after
another the indicated number of times. If you push and hold the ON/OFF
button for more than a second, the last image captured will be erased.
• The currently recording image is framed in blue. The frame disappears after
the last image is captured.
• Automatic: The camcorder will capture the indicated number of images at
the indicated speed.
10.If you’re in TAPE CAMERA mode, push the start/stop button to
begin recording.
• The multi-image screen is recorded to the tape.
If you’re in CARD CAMERA mode, press the PHOTO button to
record the multi-image screen to the memory card.
Notes:
• You can operate the multi-image screen from record or record pause mode.
• After all the images have been captured, press the ON/OFF button quickly to
cancel the multi-image screen.
• If you are operating the multi-image screen in TAPE PLAY (VCR) mode and
you stop or pause the tape, or press any other playback button or the date/photo
search buttons, the multi-image screen will be canceled. (This does not apply
with the MANUAL multi-image speed.)
• You cannot use digital zoom or the 16:9 mode when the multi-image screen is
set. The display becomes –“ – ”– .
• You cannot use the multi-image screen in the Night recording program.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Recording
Selecting the audio mode
E
The camcorder can record sound on a tape in two audio modes — 16-bit and 12-
bit. The 16-bit mode produces the higher sound quality (slightly superior to CD)
while the 12-bit mode records on two channels (stereo 1), leaving 2 channels free
(stereo 2) for you to add new sound at a later date.
PLAY
TAPE
CAMERA
TAPE
+
+
(VCR)
,
VCR SET UP
AUDIO MODE••12bit
(
40)
To switch to the 16-bit mode, open the menu and select VCR SET UP.
Then select AUDIO MODE, set it to “16 bit” and close the menu.
• “16 bit” is shown in the display for approximately 4 seconds.
Notes:
• For details on adding new sound, see p. 97.
• For details of playing back a tape that has new sound on stereo 2, see p. 100.
• When you record to the ZR50 MC/ZR45 MC from a camcorder with DV
terminal outputs, the audio mode becomes automatically set to 12 bit.
•
When the recording mode is set to SP or LP mode, the audio mode
becomes automatically set to 12 bit (1 channel only).
• In TAPE PLAY (VCR) mode, the audio mode takes effect when doing analog
line-in recording or AV insert. When you do DV in recording, the setting
automatically changes to that of the digital device connected to the camcorder.
External microphone
For greater creative control over audio recording, you can connect an external
microphone to the camcorder via the MIC terminal. When using the MIC
terminal, use a microphone with a built-in power supply (condenser microphone).
It is possible to connect almost any stereo microphone with a plug diameter of 1/8
inch (3.5 mm), however, their audio levels will be different from that of the built-
in microphone.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
For details on using the optional DM-50 microphone, see p. 75.
E
•
• Be careful when using long microphones as they may extend into the frame.
Wind screen
The camcorder has an automatic wind screen to prevent wind noise from
interfering with the sound track. Make sure it’s off when you want the
microphone to be as sensitive as possible. Use the wind screen when recording in
windy places such as the beach or near buildings.
PLAY
TAPE
CAMERA
TAPE
+
+
(VCR)
,
VCR SET UP
WIND SCREEN••OFF
(
40)
To turn it on, open the menu and select VCR SET UP. Then select
WIND SCREEN, set it to ON and close the menu.
• WS O is shown in the display when you turn the wind screen on.
Notes:
• The wind screen can be used for audio dubbing with the built-in microphone in
TAPE PLAY (VCR) mode as well as recording (when AUDIO DUB. is set to
MIC. IN in VCR SET UP submenu).
• The wind screen does not operate when an external microphone is connected to
the MIC terminal.
•
The wind screen does not operate when the optional DM-50 microphone
is connected to the advanced accessory shoe.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Self-Timer
For stills
1
2
E
DATA
P
H
O
CODE
T
O
START
/STOP PHOTO
For movies
2, 3
R
E
W
O
SELF
P
MENU
TIMER
A
R
E
M
A
C
F
F
O
PLAY(VCR)
This is useful when you want to include yourself in the picture when recording
movies or still photographs.
TAPE
CAMERA
CARD
CAMERA
+
+
,
1. Press the
or
self-timer button on the body of the camcorder
the SELF TIMER button on the wireless controller.
• SELF-T appears in the display.
• To have the subject monitor recording, rotate the LCD panel 180° ( 29).
For movies
2. Press the start/stop button.
• The camcorder starts to record after a 10-second countdown period (or after
2 seconds when you use the wireless controller). The time remaining counts
down in the display (e.g. “5 SEC”).
• SELF-T disappears from the display when recording begins.
3. Press the start/stop button to end recording.
For stills
2. Press a PHOTO button on the camcorder body or the wireless
controller.
• The camcorder automatically adjusts the focus 2 seconds before the
countdown is complete. The F mark flashes white then turns green after the
focus and exposure are set. If you are using the wireless controller, the F
mark starts flashing immediately after you press the PHOTO button.
• The camcorder takes the picture for approximately 6 seconds (
8 seconds in SP or LP recording mode).
• If you’re in TAPE CAMERA mode, the camcorder returns to record pause
mode after recording to a tape. If you’re in CARD CAMERA mode, the
currently recording image appears after recording onto a memory card.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
E
• To cancel the self-timer before the countdown has begun, press the
TIMER button.
• To cancel the self-timer once the countdown has begun, press the
TIMER button.
SELF
SELF
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VL-3 Video Light (optional)
E
K
C
LO
K
LOC
1
1
CK
LO
ON
AUTO
OFF
L
OC
K
3
When recording in dark rooms, attach the Video Light to the camcorder’s
advanced accessory shoe. The Video Light is powered by the same power source
as the camcorder.
Also refer to the VL-3 Video Light instructions.
Turn the camcorder’s power off before attaching/removing the Video Light.
1. Slide the Video Light onto the accessory shoe and tighten with the
shoe lock.
• Slide in the direction of the arrow on the bottom of the Video Light until it
clicks securely into place.
• Make sure that the light does not come disconnected when turning the shoe
lock.
2. Set the camcorder to TAPE CAMERA mode or CARD CAMERA
mode.
3. Turn the Video Light’s power switch to AUTO or ON.
• C (Connection) appears in the display.
• ON: The Video Light stays on.
• AUTO: The Video Light turns on/off automatically according to the level of
brightness of the shooting conditions.
Caution:
• Be careful not to touch the bulb or the surrounding area during or immediately
after use; it becomes very hot. Keep the Video Light away from flammable or
plastic materials.
• Do not look directly at the bulb while the Video Light is on.
• Never carry the camcorder holding the Video Light.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DM-50 Microphone (optional)
E
The highly sensitive Directional Stereo Microphone DM-50 has been designed
exclusively for camcorders equipped with an advanced accessory shoe
powered by the camcorder’s power supply. Use during cassette recording or audio
dubbing ( 97).
. It is
Refer to the DM-50’s instructions for further details.
Turn the camcorder’s power off before attaching/removing the microphone.
1. Slide the microphone onto the accessory shoe and tighten with the
shoe lock.
• Slide in the direction of the arrow on the bottom of the microphone until it
clicks securely into place.
• Make sure that the microphone does not come disconnected when turning
the shoe lock.
2. Set the camcorder to TAPE CAMERA mode.
C
•
(Connection) appears in the display.
3. Set the microphone’s directivity switch.
SHOTGUN: Clearly picks up sound arriving from the front of the microphone
(monaural).
STEREO1: Picks up sound arriving from the front of, as well as sound
surrounding the microphone.
STEREO2: Picks up sound surrounding the microphone in a wider range than
STEREO 1.
Notes:
• Never carry the camcorder holding the microphone.
• The DM-50 will not pick up any sound if another microphone is attached to the
camcorder’s microphone terminal.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Ajusting AE Shift
By controlling the level of the automatic exposure (AE) function, you can lighten
or darken the image slightly. This allows you to compensate for backlit,
overexposed scenes.
E
AE SHIFT
P
TAPE
CAMERA
CARD
CAMERA
+
+
,
Make sure the program selector is set to Q.
1. Press the selector dial in and select any recording program other
than Spotlight, Sand & Snow or Night from the program menu.
2. Press the AE SHIFT button.
• eAE appears light blue.
3. Turn the selector dial to choose your desired level.
• Levels are from –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75).
• The higher the setting, the brighter the image.
Notes:
• You cannot adjust the exposure without the e mark before AE in the display.
Push the AE SHIFT button so that e appears before AE. Then you can adjust
the exposure manually.
• You cannot adjust the AE Shift when the camcorder is set to [ (Easy
Recording), the Spotlight, Sand & Snow or Night recording program.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Shutter Speed
Set the shutter speed manually to take stable shots of quickly moving subjects.
E
TAPE
CAMERA
CARD
CAMERA
+
+
,
CAM.SET UP
SHUTTER•••••AUTO
(
40)
1. Make sure the camcorder is set to the Q (program AE) mode.
2. Press the selector dial in and choose AUTO from the program
menu.
3. Open the menu and select CAM.SET UP.
4. Select SHUTTER.
5. Press the selector dial in to select the desired shutter speed.
TAPE
AUTO
1/60
CARD
AUTO
1/60
slower
1/100
1/250
1/500
1/1000
1/2000
1/4000
1/8000
1/100
1/250
faster
• Only shutter speeds up to 1/250 are available when using a memory card.
6. Close the menu.
Concerning shooting in fluorescent lighting
When the camcorder is set to [ (Easy Recording) or the Auto recording program
in TAPE CAMERA mode, it automatically detects the flicker of fluorescent
lighting and adjusts the shutter speed to compensate. However, if the brightness
of the LCD or viewfinder display starts to flicker, make sure the camcorder is set
to the Auto or Night recording program and select the 1/100 shutter speed.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for shooting using high shutter speeds
• When shooting with a shutter speed of 1/1000 or higher, do not shoot the sun
directly.
E
Recommended shutter speeds when shooting:
• People doing outdoor sports such as
golf or tennis
1/2000 or 1/4000
(or 1/8000 to freeze
the action even more
clearly)
1/1000, 1/500 or
1/250
• Moving cars or trains or other
rapidly moving vehicles such as
roller coasters
1/100
• People doing indoor sports such as
basketball
Notes:
• You are unable to set the shutter speed in any recording program other than
AUTO.
• The image may not appear smooth when a high shutter speed is set.
• The camcorder returns to the auto shutter setting when you slide the program
selector to [ (Easy Recording), or change the recording program.
• If you set the shutter speed to 1/500 or above in TAPE CAMERA mode and
then switch the camcorder to CARD CAMERA mode, the shutter speed will
automatically change to 1/250.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Focus Manually
The camcorder can focus automatically. All you have to do is point it, and whatever
is in the center of the display will usually be in sharp focus. If it does not seem to be
focusing well, it may be because the subject is not suitable for autofocus.
E
You can use the manual focusing function for more control over focusing.
Focus lock
TAPE
CAMERA
CARD
CAMERA
+
+
,
Press the FOCUS button to turn off
autofocus. The focus remains locked at
the point set by autofocus.
FOCUS
SLIDE SHOW
(eM.FOCUS appears in the display.)
You can now adjust the focus manually
with the selector dial. Press the FOCUS
button again when you want to return
to autofocus.
• If you zoom in on your subject after
turning off autofocus, it may not stay
in focus. It is generally best to adjust
the zoom first, and then the focus.
Manual focus
TAPE
CAMERA
CARD
CAMERA
+
+
,
Use the selector dial to set the focus.
• Turn the selector dial downward to
move the focus farther away.
FOCUS
SLIDE SHOW
• Turn the selector dial upwards to
bring the focus nearer.
Notes:
• You cannot adjust the focus without the e mark before M.FOCUS in the
display. Push the FOCUS button so that e appears before M.FOCUS. Then you
can adjust the focus manually.
• The manual focus setting is canceled if you select the [ (Easy Recording)
program.
• When you are using the [ (Easy Recording) program, autofocus cannot be
turned off.
• See “Troubleshooting” on p. 141 for a list of subjects which may not be suitable
for autofocus.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the White Balance
The camcorder’s auto white balance
system compensates for a wide range of
lighting conditions. Although slight
variations are unavoidable, colors will
appear natural in virtually every
situation.
E
In some cases, you will get better
results by setting the white balance
yourself, or using one of the two preset
modes:
T Indoor Mode
• Under halogen or studio/video
lighting
• Subject is of one dominant color
• Close ups
U Outdoor mode
• In daylight, especially for close-
ups and where the subject is of
one dominant color
TAPE
CAMERA
CARD
CAMERA
+
+
,
CAM.SET UP
WHITE BAL.••AUTO
(
40)
1. Make sure the camcorder is set to the Q (program AE) mode.
2. Open the menu and select CAM.SET UP.
3. Select WHITE BAL.
4. a) For the indoor, outdoor or auto settings, press the selector dial in
to choose the setting.
• T/U appears in the display when you set the white balance to
indoor/outdoor mode.
b) To set the white balance yourself, point the camcorder at a white
object (such as a sheet of paper) and zoom in until it fills the
display. Then press the selector dial in to select SETW.
• Make sure to continue pointing the camcorder at the white object until
you have finished setting the white balance.
• The W display flashes then remains lit.
• Depending on the light source, the flashing may at times continue. The
result will remain better than with the auto setting and you can continue
recording.
5. Close the menu.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the white balance manually will probably work better
than auto white balance when shooting:
E
Subjects with one dominant color, such as sky, sea or forest
Close-ups
In rapidly changing lighting conditions
In places lit by certain types of fluorescent or mercury vapor
lights
Notes:
• Turn the digital zoom off (if neccessary) to set a more accurate white balance.
• If you have set the white balance and lighting conditions change, reset the white
balance.
• Try to record with light from a single source. Correct white balance cannot be
obtained for two types of lighting at once.
• You cannot set the white balance or choose the indoor/outdoor mode when the
program selector is set to the [ (Easy Recording) program.
• The white balance returns to the AUTO setting when you slide the program
selector to [ (Easy Recording).
• When you turn the camcorder on, the white balance returns to AUTO. If you
then switch the white balance to SET, the camcorder will remember your last
setting.
• During normal outdoor shooting, setting to AUTO may provide better results.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Date, Time and Camcorder Data (Data Code)
A data code, containing the date and time the recording was made and other
camcorder data (shutter speed and exposure settings) is automatically recorded on
a special data section of the tape.
E
• Only the date and time appear in the data code when using a memory card.
DATA
CODE
DATA
CODE
MENU
R
E
W
O
P
CAMERA
OFF
PLAY(VCR)
During TAPE PLAY (VCR) mode, the data code can be displayed or hidden while
the camcorder is in play, slow or still mode.
Camcorder data may be displayed as “– – –” during fast forward, rewind, reverse
playback, forward and reverse ×2 playback.
Press the DATA CODE button. When using a cassette, press it while
the camcorder is in play, slow or still mode.
• Press it once to display, once more to hide it.
Selecting date/time
Select whether you want the date, the time, or both to show up on your data code
display.
PLAY
(VCR)
PLAY
(VCR)
TAPE
CARD
+
+
,
DISP.SET UP
D/TIME SEL.•DATE & TIME
(
40)
To change the date and time combination, open the menu and select
DISP.SET UP. Then select D/TIME SEL., set it to DATE, TIME or
DATE & TIME and close the menu.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the data code
E
You can also choose to display camcorder data (shutter speed and exposure
settings) in cassette data codes.
PLAY
TAPE
+
(VCR)
DISP.SET UP
DATA CODE•••DATE/TIME
(
40)
To change, open the menu and select DISP.SET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and
close the menu.
Possible data code combinations for cassettes:
DATA CODE
(cassette
Date/Time &
Camera data
Date/Time
Camera data
only)
D/TIME SEL.
F11
F11
1/250
1/250
Date
JAN. 1,2002
JAN. 1,2002
F11
F11
1/250
1/250
Time
12:00:00 AM
12:00:00 AM
F11
1/250
12:00 AM
JAN. 1,2002
12:00 AM
JAN. 1,2002
F11
1/250
Date & Time
Notes:
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder’s
memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ZR50 MC/ZR45 MC is played back on a different DV
camcorder, the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 149) has been
set to OFF through the menu.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Six-second auto date
E
The 6-second auto date appears for 6 seconds to mark the changeover of a day if
the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when
you start playback and have the data code turned off. The 6-second auto date will
adjust for any time zone changes you have indicated.
PLAY
TAPE
+
(VCR)
DISP.SET UP
6SEC. DATE•••OFF
(
40)
To turn the 6-second auto date on, open the menu and select
DISP.SET UP. Then select 6SEC. DATE, set it to ON and close the
menu.
Note:
• When 6SEC.DATE is turned on but DISPLAYS ( 149) is turned off, the 6-
second auto date will still appear for 6 seconds.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching the Tape (Photo Search/Date Search)
E
ZERO SET SEARCH
SELECT
MEMORY
R
E
W
O
P
AUDIO
DUB.
REW
PLAY
STOP
SLOW
FF
A
R
E
M
A
C
AV
– /
+ /
INSERT
F
F
O
PLAY(VCR)
PAUSE
×2
REMOTE SET
This allows you to move quickly through still pictures recorded anywhere on a
tape (photo search) or between different days or areas of recording (date search)
on a tape.
PLAY
TAPE
+
(VCR)
1. Press the SEARCH SELECT button to choose between photo/date
search.
• PHOTO SEARCH or DATE SEARCH is shown in the display for 4
seconds.
2. Press the - and + buttons to move backwards or forwards
through the still pictures or between different days of recording.
• Press once to move to the start of the previous/next still picture or day on
the tape.
• You can press more than once to move to the corresponding still picture or
day (up to a maximum of 10 times), e.g. press the + button 5 times to
move forward 5 still pictures or days.
• PHOTO SEARCH/DATE SEARCH appears in the middle of the display
alongside the - or + mark and number to search through. You can
change direction easily by pressing the button for the opposite direction.
Notes:
• Press 3 (stop) to stop mid-search.
• If you begin a search very close to the start of a recorded still picture during
photo search, the camcorder may skip straight past it.
• When you have set the area for the World Clock, date search also looks for the
change in date based on the adjusted time.
• A date/area cannot be identified if the total recording time on that day/area was
less than 1 minute.
• Date search playback may start just before or after the beginning of the located
section.
• If the data code is not displayed correctly you will not be able to operate the
date search correctly.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Returning to a Pre-Marked Position
E
ZERO SET
MEMORY
SEARCH
SELECT
R
E
W
O
P
AUDIO
DUB.
REW
PLAY
STOP
SLOW
FF
CAMERA
OFF
AV
– /
+ /
INSERT
PLAY(VCR)
PAUSE
×2
REMOTE SET
Use the wireless controller to mark a point on a tape that you want to return to
following playback.
PLAY
TAPE
CAMERA
TAPE
+
+
(VCR)
,
1. Press the ZERO SET MEMORY button on the wireless controller
during playback at a point you want to return to later.
• The time code is replaced by a tape counter that is set to zero with the
indication.
Â
• Press the ZERO SET MEMORY button once more to cancel the zero set
memory.
2. When you have finished playback, fast forward or rewind the tape.
The tape stops automatically when it reaches the zero set position.
• RTN1 or `RTN appears in the display.
• The tape counter with
code reappears.
Â
indication disappears from the display and the time
Notes:
• The zero set memory may not function correctly where there is a break between
recordings on the tape.
• You can also use zero set memory to mark a position on a tape in TAPE
CAMERA mode. When you then play back the tape, pressing rewind will take
you back to the pre-marked position.
• If you remove the tape while the zero set memory is set, the memory is
canceled and the tape counter reverts to time code.
• The camcorder remembers your setting even if you turn it off and back on again
or move the program selector.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing to a VCR
By connecting the camcorder to a VCR, you can edit your recordings in order to
remove unwanted scenes — or combine different shots to create your own video
productions.
E
Preparations
1. Connect the camcorder to the VCR.
• See C“ onnections for Playback on a TV Screen”on p. 34.
2. Prepare the TV and VCR.
• Turn on the TV and set the TV/VIDEO selector to VIDEO.
• Turn on the VCR, and set its input selector to LINE. Load a blank cassette,
and put the VCR in record pause mode.
• See your TV and VCR instruction manuals for details.
3. Turn the camcorder’s POWER switch to PLAY (VCR), and move
the camcorder’s TAPE/CARD switch to TAPE.
• Make sure the AV/headphone terminal is set to AV through the menu
(
34). If PHONES appears in the display, switch the terminal.
4. Load your recorded cassette.
Editing
1. Find a point on your recorded cassette slightly before the section
you want to copy.
2. Start to play it back while you monitor the picture on the TV.
3. Start recording on the VCR as soon as the section you want to copy
appears on the screen.
4. Pause the VCR at the end of the section you want to copy, then stop
playback on the camcorder.
5. Repeat steps 1 to 4 until your edited recording is complete.
Note:
• The quality of the edited tape will be slightly lower than that of the original.
m (LANC) terminal
The m terminal allows you to connect
the camcorder to equipment. Some
buttons on editing equipment may
operate differently from those on the
camcorder.
Notes:
• m (LANC) is a trademark. It stands for Local Application Control Bus System.
• We cannot guarantee the results when connecting to equipment not bearing the
LANC m symbol.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing to/from a Cassette with Digital Video Equipment
Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV cable
can handle data in both directions.
E
• If a digital VCR is connected and an anomalous signal is sent from the VCR,
the images recorded on the tape may also be anomalous (although it may not
appear so on the TV image), or not recorded at all.
• You are unable to dub tapes recorded with the copyright protective signal.
: Signal flow
REC
REC
FOCUS
AE SHIFT
SEARCH
SEARCH
SLIDE SHOW
REC
SEARCH
SELECT
PAUSE
ZERO SET
MEMORY
REW
– /
PLAY
STOP
SLOW
FF
AUDIO
DUB.
+ /
AV
PAUSE
×2
INSERT
Side with arrow
Side with arrow
Preparations
Example dubbing to the camcorder
1. Connect the camcorder and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Turn the camcorder’s POWER switch to PLAY (VCR), and move
the camcorder’s TAPE/CARD switch to TAPE.
• DV IN appears in the display.
4. Load a blank cassette.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing
E
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Notes:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
•
You cannot use a cassette recorded in
SP or
LP mode with the
camcorder for DV dubbing with another digital device not equipped with that
mode.
•
You cannot record in SP or LP mode from a tape recorded in
SP or
LP mode. Likewise, you cannot record in
recorded in SP or LP mode.
SP or
LP mode from a tape
• When dubbing to a cassette with digital video equipment, be sure to set AV \
DV OUT to OFF in the menu.
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play
back such a cassette, “COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED”appears in the display for a few seconds and then the camcorder
displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable “COPYRIGHT
PROTECTED DUBBING RESTRICTED”appears in the display; you cannot
record the contents of the tape.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from a VCR, TV or Analog Camcorder (Analog Line-in)
You can record a video played on your VCR or analog camcorder (for digital
camcorders, see p. 88) or a TV program onto a tape in the ZR50 MC/ZR45 MC, if
the TV or other device has audio/video outputs.
E
• If an anomalous signal is sent from the TV or VCR, the images recorded on the
tape may also be anomalous (although it may not appear so on the TV image),
not recorded at all, or COPYRIGHT PROTECTED DUBBING RESTRICTED
may appear in the display.
• You are unable to dub tapes recorded with the copyright protective signal.
REC
SEARCH
SELECT
PAUSE
REC
REC
FOCUS
AE SHIFT
SEARCH
SEARCH
SLIDE SHOW
ZERO SET
MEMORY
REW
– /
PLAY
STOP
SLOW
: Signal flow
AUDIO
DUB.
S
AV
PAUSE
INSERT
OUTPUT
S(S1)-VIDEO
S-150 S-video Cable (optional)
VIDEO
AUDIO
L
AV
STV-250N Stereo Video Cable
R
MIC
You cannot use headphones while doing analog line-in recording. If you have the
AV/headphones terminal set to headphones, it will automatically switch to AV for
analog line-in recording. PHONES disappears from the display.
Preparations
Example recording from a VCR
1. Connect the camcorder to the VCR.
2. Prepare the device.
• Set the TV/Video selector on the television to Video. For further details, see
C“ onnections for Playback on a TV Screen”on p. 34.
• Turn on the VCR. Load your recorded cassette, and put the VCR in playback
pause mode.
• See your TV and VCR instruction manuals for details.
3. Turn the camcorder’s POWER switch to PLAY (VCR), and move
the camcorder’s TAPE/CARD switch to TAPE.
4. Load a blank cassette.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing
E
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• S-video and AV IN/OUT terminals work as input terminals.
• The camcorder enters record pause mode.
3. Start playback on the other device or turn on the TV to see the
desired program while you monitor the picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Note:
• You can monitor the picture in the viewfinder or LCD.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Digitally outputting analog video and audio
signals (Analog-Digital Converter)
E
Connecting the camcorder to your VCR or 8 mm video camera allows conversion
of recorded analog video and audio signals to digital signals in an instant. The
digital signals can be output to the other equipment with a DV terminal. The
camcorders’ DV terminal works exclusively as an output terminal.
• There may be cases where analog-digital converter cannot be done properly,
depending on the signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or anomalous
signals such as ones that include ghost signals, etc.
• You cannot use your headphones during digital conversion. Even if the
AV/headphone terminal is set to “PHONES”through the menu, it will
automatically be set to “AV,” and P“HONES”will disappear from the display.
• You are recommended to use power from a household wall outlet with an AC
power adapter.
• Do not operate with a cassette inserted to the camcorder.
• Turn off the power of all equipment before performing connections.
• Refer also to the instruction manuals of the other equipment connected.
: Signal flow
OUTPUT
S
S(S1)-VIDEO
S-150 S-video Cable (optional)
VIDEO
AUDIO
L
STV-250N
AV
Stereo Video Cable
R
MIC
DV
Side with arrow
Side with
arrow
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the analog-digital converter on
E
PLAY
TAPE
+
(VCR)
VCR.SET UP
AV DV OUT•••OFF
(
40)
To turn the analog-digital converter on, open the menu and select
\
VCR SET UP. Then select AV
menu.
DV OUT, set it to ON and close the
Caution:
• For normal use, set AV \DV OUT to OFF through the menu. If it is set to
ON, you cannot input digital signals through the camcorders’ DV terminal.
• If you attempt to perform analog-digital conversion with a cassette inserted to
the camcorder, the converted signals may not be output to the connected digital
video equipment.
• When connecting to a PC equipped with a DV terminal, you may not be able to
transfer converted signals to your PC, depending on the software you are using,
and the specifications of your PC and its settings.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Over Existing Scenes (AV Insert Editing)
You can insert new scenes from your VCR or other camcorder onto your pre-
recorded tape using the ZR50 MC/ZR45 MCs’ analog line-in or DV in terminals.
Original video and audio will be replaced with the new video and audio.
Scene to be inserted
E
The playback tape
Insert start point
Insert end point
Before inserting
The tape in the
camcorder
After inserting
The tape in the
camcorder
The video and audio of the new scene replace that of the old.
S
: Signal flow
OUTPUT
S(S1)-VIDEO
S-150 S-video Cable (optional)
VIDEO
AUDIO
L
AV
STV-250N Stereo Video Cable
R
MIC
Make sure the AV/headphone terminal is set to AV through the menu ( 34). If
PHONES appears in the display, switch the terminal.
ZERO SET
SEARCH
MEMORY SELECT
AUDIO
REW
– /
PLAY
STOP
SLOW
FF
+ /
DUB.
AV
INSERT
PAUSE
¥2
REMOTE SET
Side with arrow
Side with arrow
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
E
The tape in the camcorder:
When using the ZR50 MC/ZR45 MCs’ AV insert function, only record to tapes
recorded in SP mode.
If there are non-recorded portions or portions recorded in a mode other than SP
mode on the tape, recording will stop.
The playback tape:
Use only tapes without non-recorded portions.
If there are non-recorded portions or changes in the recording mode, you may not
be able to insert AV correctly.
You cannot insert AV in the following cases:
• The playback tape has been poorly recorded.
• During special playback: fast forward playback, rewind playback or slow
playback etc. (analog only).
TV:
You cannot insert AV from a TV program with anomalous synchronized signals,
such as when the program itself received poor signals.
Example recording from a VCR
1. Connect the camcorder to the VCR.
2. Prepare the VCR and TV.
• Set the TV/Video selector on the television to Video. For further details, see
C“ onnections for Playback on a TV Screen”on p. 34.
• Turn on the VCR and load a recorded cassette.
• See your TV and VCR instruction manuals for details.
3. Turn the camcorder’s POWER switch to PLAY (VCR) and load a
recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
4. Move the camcorder’s TAPE/CARD switch to TAPE.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
E
1. On the VCR, locate a point 3 seconds before the scene to be
inserted. Set the VCR to playback pause mode.
2. On the camcorder, press PLAY and locate the recording start
point. Set the camcorder to playback pause mode.
• You can use the playback buttons on the body of the camcorder or the
special playback functions on the wireless controller in the same way as in
playback mode.
3. Press the AV INSERT button.
• AV INSERT and 2a appear in the display.
4. Play back the cassette in the VCR.
5. To start inserting, press the PAUSE button on the camcorder.
• 2a changes to 2.
6. To stop inserting, press the STOP button on the camcorder.
• Inserting stops and AV INSERT disappears from the display. The camcorder
returns to stop mode.
• If instead of pressing STOP you press PAUSE, the camcorder returns to the
AV insert pause mode.
• If you set the zero set memory at the position on the tape where you want to
stop inserting, every time you return to that point, the camcorder will cancel
its AV inserting and enter stop mode.
7. Stop playback on the VCR.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Dubbing
You can add sound to the original sound on a pre-recorded tape from audio
products (AUDIO IN) or with the internal or external microphone (MIC. IN). The
original sound will not be erased. For best results, add sound to tapes that have
been recorded with this camcorder in SP mode with 12-bit sound. If there are
non-recorded portions on the tape, or portions recorded in a mode other than SP
mode, or with 16-bit or 12-bit, 4-channel sound, dubbing will stop. If your tape
hasnt’ been recorded in SP mode with 12-bit sound, we recommend dubbing your
original tape onto a blank tape using the ZR50 MC/ZR45 MCs’ analog line-in
function, then dubbing audio onto the new tape. Make absolutely sure to set the
audio mode of the new tape to 12-bit and the recording mode to SP.
E
To connect other audio equipment:
: Signal flow
OUTPUT
STV-250N
Stereo Video Cable
AUDIO
An audio device
(i. e. CD player)
AV
L
R
MIC
Make sure the AV/headphone terminal is set to AV through the menu ( 34). If
PHONES appears in the display, switch the terminal.
Notes:
• Do not use the yellow video terminal.
• The AV terminal doesnt’ put out any video, so connect the S-video terminals
and check your TV, or check the LCD or the viewfinder as you add new sound.
Always check the new sound with the speaker.
To connect an external microphone:
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
When using an external microphone \ Connect it to the microphone
E
•
•
terminal.
When using the DM-50 microphone \ Make sure nothing is connected
to the microphone terminal.
When using the built-in microphone \ Make sure nothing is connected
to either the microphone
terminal or the accessory shoe.
When you add sound using the built-in microphone make sure not to
connect any cables to the MIC terminal.
• To use your TV to monitor video, connect the S-video terminal ( 35) or the
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones only when using the S-video terminal ( 34).
Preparations
Turn the camcorders’ POWER switch to PLAY (VCR) and move the camcorders’
TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
ZERO SET
SEARCH
R
E
W
O
MEMORY SELECT
P
AUDIO
DUB.
REW
– /
PLAY
STOP
SLOW
FF
CAMERA
F
F
O
AV
+ /
INSERT
PLAY(VCR)
PAUSE
×2
REMOTE SET
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
PLAY
TAPE
+
(VCR)
VCR SET UP
AUDIO DUB.••AUDIO IN
(
40)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select AUDIO IN or MIC. IN and close the menu.
E
4. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camcorder or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camcorder becomes set to playback pause mode.
5. Press AUDIO DUB.
• AUDIO DUB. and
appear on the display.
•
If you have the DM-50 microphone (optional) attached,
(Connection) appears in the display.
C
6. Press the PAUSE button (and start play on the other audio device
if AUDIO IN).
• Audio dubbing starts.
• If MIC. IN, direct your voice into the microphone.
•
changes to
.
7. When you get to the point where you want to stop dubbing, press
the STOP button (and then stop play on the other audio device if
AUDIO IN).
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set zero set memory ( 86) at the place you want to stop
audio dubbing, then every time you return to that position, audio dubbing
will cancel.
• If instead of pressing STOP you press PAUSE, the camcorder will return to
the playback pause mode.
Notes:
• You cannot use the DV terminal while adding sound.
• You might want to adjust the audio mix ( 100) when playing back a tape
with added sound.
• There may be a loss of sound quality if you add sound to a tape recorded on a
camcorder other than the ZR50 MC/ZR45 MC.
• After adding sound 3 or more times to the same place on a tape, there may be
some loss in sound quality.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio Mix
E
R
E
W
O
P
BAMLAINXCE
A
R
E
M
AUDIO
A
C
MONITOR ST-1
ST-2
F
F
O
PLAY(VCR)
When you play back a tape that was recorded in 12-bit mode, you can set the
audio output to play: stereo 1 (the original sound), stereo 2 (any new sound,
dubbed to the tape after recording), or mix the balance between the two.
• Audio from the 16-bit mode only contains stereo 1 sound and so you cannot/do
not need to select the audio mix. The same is true for the 12-bit stereo 1 mode,
unless new sound has been added post-recording.
PLAY
TAPE
+
(VCR)
Choose the output.
• Press AUDIO MONITOR on the wireless controller.
• Starting with the last selected setting, 4 settings appear as you push the
button:
–STEREO1 for just stereo 1.
–STEREO2 for just stereo 2.
–MIX/FIXED for an equal mix of stereo 1 and 2.
–MIX/VARI. (mix variable) for when you want to mix the balance between
stereo 1 and 2.
• To simply choose STEREO1, STEREO2 or MIX/FIXED, make sure your
choice appears on the display.
• If you choose MIX/VARI., you can go on to mix the balance.
• Use the ST-1/ST-2 keys to mix the balance. A bar showing the mix appears
on the screen for 4 seconds.
Note:
• When you have chosen the output, STEREO1, STEREO2, MIX/FIXED or
MIX/VARI. is shown in the top left of the display for a few seconds. If you turn
the power off the output is set to STEREO1.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting audio output channels
E
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
PLAY
TAPE
+
(VCR)
VCR SET UP
OUTPUT CH•••L/R
(
40)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
OUTPUT CH setting
Played back sound
Tape recorded with
stereo sound
Tape recorded on
multiple channels
L/R
L/L
R/R
L+R channels
L channel only
R channel only
main + sub
main only
sub only
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC Using a DV Cable
To transfer still images from a memory card to your PC by using a USB cable,
see p. 127.
By using a DV cable and connecting the camcorder to a PC equipped with a DV
terminal conforming to IEEE 1394/DV compatible capture board, you can transfer
images taken with the camcorder to your PC.
E
• While connected, it is recommended that you power your camcorder from a
household power socket using the power adapter.
• Turn off the power of both the camcorder and the PC before connecting.
• Optional software necessary.
DV
DV Cable (commercially available)
Notes:
• Operation may not work correctly, depending on the software you are using,
and the specifications of your PC and its settings.
• See your PC instruction manual for details.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Card Introduction
The camcorder can take, store and manage still images on 2 types of memory
cards: the MultiMediaCard (supplied with the camcorder) or an SD Memory Card
(commercially available). The MultiMediaCard is an ultra-small, ultra-light media
that can record still images. About the same size as a MultiMediaCard, the SD
(Secure Digital) Memory Card has the protect switch to protect your recording
from accidental erasure, and fits into the same slot as the MultiMediaCard.
E
You can do the following with a memory
card:
MultiMediaCard MMC-8M
Front Back
• Record still images ( 107)
• View still images 3 ways: Single
Terminals
(
111), Slide show ( 112),
Index screen ( 112)
• Select the quality of images recorded on
the card (
104)
• Protect important images against
accidental erasure, print mark and erase still images ( 113-120)
• Create interesting effects by combining images ( 121)
• Record a still image from a cassette ( 109)
• Copy multiple still images automatically to and from a cassette ( 124, 125)
• Utilize memory card still images on a PC ( 127)
You can use most of the camcorders’ functions when recording to a memory card,
such as the various recording programs ( 59), self-timer ( 72), shutter speed
(
77), white balance ( 80) and other manual adjustments. Available functions
PLAY
are marked with the
+
or
+
icons.
(VCR)
CARD
CAMERA
CARD
2 If you use memory cards other than the supplied one, make sure to format
them with the camcorder ( 126).
Important
• Inserting or removing the memory card without first setting the POWER
switch to OFF can result in data damage.
• This camcorder uses only MultiMediaCards or SD Memory Cards(
You cannot use any other types of memory cards.
*).
*
logo is a trademark.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting and removing the memory card
E
MultiMedia
Card access
indicator
MultiMediaCard
MMC-8M
MultiMediaCard
M
R
MMC-8M
M
R
1. Turn the POWER switch to OFF.
• When removing the memory card, make sure the card access indicator is off.
2. Open the memory card compartment cover in the direction of the
arrow.
3. Insert or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.
Do not attempt to pull the memory card out without first pushing it in.
4. Close the cover.
• When inserting the memory card, do not attempt to close the cover
forcefully without the memory card properly inserted.
Notes:
• When you set the camcorder to CARD PLAY (VCR) mode, the last image
recorded appears. If there are no images recorded on the memory card, NO
IMAGES appears in the display.
• Do not touch the memory card terminals.
Selecting the recording image quality
Select the quality of a still image to be recorded.
PLAY
TAPE
CARD
CAMERA
+
+
(VCR)
,
CARD SET UP
QUALITY•••••FINE
(
40)
To change the image quality, open the menu and select CARD SET
UP. Then select QUALITY, set it to STANDARD and close the menu.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
E
• Depending on the image you are recording, sometimes there will be no
difference in image quality between settings.
• Images are compressed and recorded in the JPEG (Joint Photographic Experts
Group) format.
• The number of pixels is 640 × 480 (VGA) in both FINE and STANDARD
modes.
Image
quality
Necessary memory Number of images
Use when you want to...
per image
per 8MB MMC*
...save high quality images,
print out, etc.
FINE
Approx. 124 KB
Approx. 60 images
...attach images to Emails,
include them in your own
home page, etc.
STANDARD
Approx. 70 KB
Approx. 105 images
* These figures are approximate. The actual number you will be able to record
varies depending on the images. Remember that the sample images already
recorded on the supplied MultiMediaCard are included in the total number.
• The number of images that can still be recorded on a memory card may
sometimes decrease by 2 images at once.
• Refer to p. 152 for the memory card displays.
Card access display
The operating states of the memory card are shown in the center of the display.
PLAY
(VCR)
PLAY
TAPE
CAMERA
TAPE
CARD
CAMERA
CARD
+
+
+
+
(VCR)
,
,
,
DISP.SET UP
CARD ACCESS•ON
(
40)
To turn the card access display off, open the menu and select
DISP.SET UP. Then select CARD ACCESS, set it to OFF and close
the menu.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
File numbers
E
The images you take are automatically assigned file numbers from 0101-9900 and
stored in folders of 100 images each. Each folder is numbered from 101 to 998
and recorded on the memory card. Sample images have been pre-recorded on the
supplied MultiMediaCard, entering folder number 100 (folder name is
1“00canon”).
Set the image file numbers so that they reset each time a new memory card is
inserted, or so that they count up continuously.
1 CONTINUOUS
Numbering is continuous between cards, so that
Three images are
recorded on the card.
the first file number assigned on a new memory
card is 1 more than the last file number assigned
on the previous memory card. When the file
numbers are set to CONTINUOUS, each image
101-0101
101
101-0102
101-0103
When you change the
card and take a picture.
taken is assigned a different number, avoiding
1
2
duplication of numbers. This is convenient
when you want to manage your images on a PC.
We recommend keeping the file numbers set to
CONTINUOUS.
101-0104
101-0101
101
101
2 RESET
Each time you insert a new memory card, the file number resets to its default
value (101-0101). If the card already contains files, the next available number is
assigned.
PLAY
TAPE
CARD
CAMERA
+
+
(VCR)
,
CARD SET UP
FILE NOS.•••CONTINUOUS
(
40)
To change the file numbering, open the menu and select CARD SET
UP. Then select FILE NOS., set it to RESET and close the menu.
Turn off the shutter sound
CARD
CAMERA
+
Makes the sound of a shutter being released when a still image is recorded to a
memory card.
CARD SET UP
SHTR SOUND••ON
(
40)
To turn the shutter sound off, open the menu and select CARD SET
UP. Then select SHTR SOUND, set it to OFF and close the menu.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Still Images to a Memory Card
E
2
3
CARD
TAPE
P
H
O
T
O
R
E
W
O
P
1
4
4
CAMERA
F
F
O
PLAY(VCR)
P
H
O
T
O
The camcorder is equipped with a mechanical shutter so that you can record vivid
still images onto a memory card (Progressive Photo function). You can also
record onto a memory card images from a tape in the camcorder, or images input
through the DV in terminal.
• Moving pictures cannot be recorded onto a memory card.
• Images input through the AV in terminal cannot be recorded onto a memory
card.
• Memory cards cannot record audio.
• If you are using an SD Memory Card, make
SD Memory Card
Front
Back
sure the protect switch is set to allow
recording.
Protect
switch
Make sure a memory card that has enough
memory available is inserted into the
camcorder.
While the card access indicator flashes, do not disconnect the power source.
Doing so could result in data damage.
1. Press the small green button on the POWER switch and hold, turn
the POWER switch to CAMERA.
2. Move the TAPE/CARD switch to CARD.
• The number of images that can still be recorded on the memory card, and
other information appear in the display.
• The camcorder will turn itself off if you are using a battery and do not
operate the camcorder for more than about 5 minutes. Set the POWER
switch to OFF and then back to CAMERA.
3. Press the PHOTO button halfway and hold it.
• Exposure is locked.
• During autofocus flashes white in the display as the camcorder adjust the
F
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still image.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the PHOTO button fully down to record the still picture.
•
disappears from the display. The shutter sound sounds and simultaneously
F
E
the display appears to close for an instant as if it were a shutter releasing.
• The card access indicator flashes and the card access display appears in the
display. (see “The indicators that appear in the LCD display when MIRROR is
turned on”on page 29).
Notes:
• To use the self-timer ( 72), press the
the PHOTO button fully down.
button before step 3, and then press
• The wireless controllers’ PHOTO button has no half-way setting. Press the
button fully and the camcorder immediately takes the image.
• When the POWER switch is set to CAMERA and the TAPE/CARD switch is
moved from TAPE to CARD, the camcorder modifies the image for appropriate
recording onto a memory card.
The indicators that appear in the display when recording to a memory card:
Image quality (
104)
Image stabilizer
58)
(
FINE
50
>>>>
Number of images that can
still be recorded on the
memory card (
105)
Remaining battery power
134)
Backup battery
135)
(
(
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording an Image from a Cassette as a Still Image
2
E
1
FOCUS
SLIDE SHOW
P
H
O
T
O
3
3
P
H
O
T
O
Record an image from a cassette onto a memory card. To automatically record
multiple still images from a cassette to a memory card, refer to “Copying Still
Images from a Cassette”on p.124.
• The still images’ data code will reflect the date and time it is recorded to the
memory card.
Cassette
Press the PHOTO
button fully down
Memory card
PLAY
TAPE
+
(VCR)
1. Play back the cassette.
2. When the image you want to record appears in the display, press
the PHOTO button halfway down and hold it.
• The tape is set to playback pause mode and the number of images that can
still be recorded on the memory card appears in the display.
3. Press the PHOTO button fully down to record the image to the
memory card.
• The card access indicator flashes.
Notes:
• You can also set the cassette to playback pause mode in step 1 and record the
image with only 1 full press of the PHOTO button.
• If you record an image onto a memory card that was originally recorded in the
16:9 mode for wide screen TVs’, the image will appear to be vertically
s“quashed”(compressed).
• The shutter sound doesnt’ sound in TAPE PLAY (VCR) mode.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from Another DV Device as a Still Image
Record images input through the DV in terminal onto the memory card as still
images.
E
• The still images’ data code will reflect the date and time it is recorded to the
memory card.
: Signal flow
P
H
O
T
O
CARD
P
H
O
T
O
TAPE
ER
W
PO
CAMERA
F
F
O
PLAY(VCR)
Side with arrow
Side with arrow
Preparations
1. Connect the camcorder to the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Load a memory card. Turn the camcorder’s POWER switch to
PLAY (VCR).
4. Move the TAPE/CARD switch to TAPE.
• DV IN appears in the display.
• If you have a cassette inserted, make sure it is in stop mode.
Recording
1. Start playback on the other device.
2. When the image you want to record appears in the display, press
the PHOTO button halfway down and hold it.
• The image appears as a still image in the display.
• The number of images that can still be recorded on the memory card
appears in the display.
3. Press the PHOTO button fully down to record the image to the
memory card.
• The card access indicator flashes.
Notes:
• If you record an image onto a memory card that was originally recorded in the
16:9 mode for wide screen TVs’, the image will appear to be vertically
s“quashed”(compressed).
• The shutter sound doesnt’ sound in TAPE PLAY (VCR) mode.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Still Images
REC
REC
FOCUS
AE SHIFT
E
SEARCH
SEARCH
SLIDE SHOW
CARD
TAPE
SLIDE
SHOW
POWER
CARD
A
R
E
M
A
C
F
F
O
PLAY(VCR)
Play back and view still images recorded on a memory card. (For details on
connecting to a TV, see “Connections for Playback on a TV Screen”on p. 34)
• The camcorder may not be able to copy or play, etc., images recorded on a non-
Canon camcorder.
Do not change the data recorded on a memory card.
• You may not be able to play back the following still images correctly on this
camcorder:
− Still images that have not been recorded with this camcorder but downloaded
from a PC (excluding the sample images on p. 129-130)
− Still images that have been recorded with this camcorder but have subsequently
been enhanced on a PC
− Still images whose image file names have been changed on a PC
There are 3 ways to view still images:
• Single image
• Slide show:
One after the other automatically in order of recording
• Index screen: Six images at once
When the camcorder is in playback pause mode, you can use card jump function
to move quickly through still images recorded anywhere on a memory card to
find a still image you want to view (Card Jump function).
Make sure a memory card that has images recorded on it is inserted into the
camcorder.
While the card access indicator flashes, do not disconnect the power source.
Doing so could result in data damage.
2
Single Image
1. Turn the POWER switch to PLAY (VCR).
2. Move the TAPE/CARD switch to CARD.
• The last image recorded appears in the display.
3. Search for the desired still image by pressing the CARD +/– buttons.
• Press + to view the next image and –to view the previous image.
• Pressing + at the last image will take you to the first image. Pressing –at
the first image will take you to the last image.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Card Jump Function
You can jump from the current image to the desired image of unadjacent image
number without displaying the images one by one.
E
The numbers shown in the upper right in CARD PLAY (VCR) mode indicate the image
number of the current still image / total number of still images on the memory card.
PLAY
CARD
+
(VCR)
With an image in the display, press and hold the CARD +/– button.
• Press the + button to jump through the images forwards and press the –button
to jump backwards.
• The image number moves forwards or backwards.
• When you release the button, the still image, to which the currently shown
number is assigned, appears in the display.
2
Slide Show
PLAY
CARD
+
(VCR)
With an image in the display, press the SLIDE SHOW button.
• The images are played back one after another.
To stop the slide show, press the SLIDE SHOW button.
• The slide show starts or stops each time you press the SLIDE SHOW button.
2
Index Screen
Up to 6 images appear at once so you can search
INDEX
101–0143
43/50
quickly for an image.
PLAY
CARD
+
(VCR)
1. With an image in the display, press the
index screen button.
SEL.INDEXEND
• Up to 6 images appear in the display.
2. Move the
mark to the image you want to view.
• Turn the selector dial downwards to go to the previous image and upwards
to go to the next image.
• Turning the dial upwards at the last image will take you to the next index
screen. Turning the dial downwards at the first image will take you to the
previous index screen.
• Jump to the next/previous index screen with the CARD +/–buttons.
3. Press the
index screen button.
• The image you have marked fills the whole display.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings of the Still Image Recorded to a Memory Card
E
REC
SEARCH
Immediately after you have recorded a still image to a memory card, you can
check the image without switching the operation mode by the POWER switch.
(CARD PHOTO REVIEW)
You can also easily erase unwanted images while viewing still images recorded to
memory card, protect images from accidental erasure, or mark an image for
printing. (File Operation)
• Card Photo Review is set in CARD CAMERA mode and File Operation is set
in CARD PLAY (VCR) mode.
● Preventing Accidental Erasure (Protect
)
Select important images and protect them from accidental erasure.
• If a memory card is formatted, however, all images, including protected images,
will be permanently erased.
• The pre-recorded sample images provided on the supplied MultiMediaCard are
already protected.
There are 3 ways to protect a still image (including the ways to cancel the
setting).
CARD
CARD
CARD
CAMERA
1.
2.
3.
+
+
+
➡ CARD PHOTO REVIEW menu ( 114)
PLAY
(VCR)
SINGLE
➡ File Operation menu
(
115)
(
PLAY
(VCR)
INDEX
➡ Card Operations submenu
116)
● Marking a Still Image for Printing (Print Mark
)
An image on a memory card must be marked before it can be printed. The
camcorder supports the DPOF (Digital Print Order Format) print format.
Images can be automatically printed on a DPOF-supporting Canon printer. Up to
50 images per memory card can be print marked.
There are 3 ways to mark a still image for printing (including the ways to cancel
the setting).
To mark an image for printing or erase print marks one at a time
PLAY
SINGLE
CARD
1.
2.
+
+
➡ File Operation menu
(
115)
(
(VCR)
PLAY
(VCR)
INDEX
CARD
➡ Card Operations submenu
117)
118)
To erase all print marks
PLAY
SINGLE
CARD
3.
+
➡ Card Operations submenu
(
(VCR)
113
Download from Www.Somanuals.com. All Manuals Search And Download.
● Erasing Still Images
Erase images singly or all at once.
E
• You cannot erase protected images. Cancel image protection first in order to
erase an image.
• Erase images with caution. Once an image has been erased it cannot be
restored.
There are 3 ways to erase a single image.
To erase images one at a time
CARD
1.
2.
+
+
CAMERA
➡ CARD PHOTO REVIEW menu ( 114)
PLAY
(VCR)
SINGLE
CARD
➡ File Operation menu
(
115)
To erase images one at a time or erase all images on the memory card at once
PLAY
SINGLE
CARD
3.
+
➡ Card Operations submenu
(
119)
(VCR)
SINGLE
INDEX
: When playing back an image in CARD PLAY (VCR) mode
: When displaying an index screen in CARD PLAY (VCR) mode
CARD PHOTO REVIEW
CARD
CAMERA
+
1. During/after recoding a still image, press the CARD
open the CARD PHOTO REVIEW menu.
-
button to
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a stilll image, the menu appears
immediately.
• PROTECT
, IMAGE ERASE settings appear.
• If you select |RETURN, the still image disappears.
To protect an image
2. Select PROTECT
and press the selector dial in.
• The
protect mark appears on the image.
• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select |RETURN, the still image disappears.
To erase an image
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the selector dial in.
• The image is erased.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
File Operation (FILE OPER.)
E
PLAY
CARD
+
(VCR)
1. With an image in the display, press the selector dial in to open the
FILE OPER. menu.
• PROTECT
, PRINT MARK
, and IMAGE ERASE settings appear.
• If you select |RETURN, the menu disappears from the display.
To protect an image
2. Select PROTECT
and press the selector dial in.
• The
protect mark appears on the image.
• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select |RETURN, the menu disappears from the display.
• To cancel image protection, select PROTECT
and press the selector dial
in. disappears and now you can erase this image.
To mark a image for Printing (Print Mark)
2. Select PRINT MARK
and press the selector dial in.
• The
print mark appears on the image.
• Press the selector dial again to cancel it.
• If you select |RETURN, the menu disappears from the display.
• To cancel a print mark, select PRINT MARK
in. disappears.
and press the selector dial
To erase the image
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
• If you select |RETURN, the menu disappears from the display.
3. Select YES and press the selector dial in.
• The image is erased.
• One image before the erased image appears.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing Accidental Erasure (Protect)
E
REC
REC
SEARCH
SEARCH
SLIDE
SHOW
CARD
This section describes how to protect the still image from the Card Operation
submenu when displaying an index screen in CARD PLAY (VCR) mode
(including the way to cancel the setting).
You can also protect a still image through CARD PHOTO REVIEW ( 114) or
File Operation menu ( 115).
Protecting an image while viewing an index screen
PLAY
CARD
+
(VCR)
CARD OPER.
PROTECT
(
40)
Make sure a memory card that has images recorded on it is inserted into the
camcorder.
1. With an image in the display, press the
index screen button.
• Up to 6 images appear in the display.
• Move the
112).
mark to the image that you want to protect (Index Screen
2. Open the menu and select CARD OPER.
\
3. Select
PROTECT
.
4. Press the selector dial in.
• The
protect mark appears on the image.
• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
5. Close the menu.
Note:
• To cancel image protection, move the
mark to the protected image and
press the selector dial in. The
protect mark disappears.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking a Still Image for Printing (Print Mark)
E
This section describes how to mark the still image for printing from Card
Operation submenu in CARD PLAY (VCR) mode (including the way to cancel
the setting).
–When displaying an index screen, you can mark the image for printing.
–When playing back a single image, you can erase all print marks.
You can also mark a still image for printing through File Operation menu
(
115).
Marking an image for printing while viewing an index screen
PLAY
CARD
+
(VCR)
CARD OPER.
PRINT MARK
(
40)
Make sure a memory card that has images recorded on it has been inserted into
the camcorder.
1. With an image in the display, press the
index screen button.
• Up to 6 images appear in the display.
• Move the
printing (Index Screen
mark to the image that you want to mark an image for
112).
2. Open the menu and select CARD OPER.
\
3. Select
PRINT MARK
.
4. Press the selector dial in.
• The
print mark appears next to the image.
• Press the selector dial again to cancel it.
5. Close the menu.
Notes:
• To cancel a print mark, move
to the print-marked image and press the
selector dial in. The
print mark disappears.
• If there are a large number of images recorded on the memory card, it may take
time for a print mark to appear on an image.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing all print marks
E
PLAY
CARD
+
(VCR)
CARD OPER.
PRINT MARKS ALL ERASE
(
40)
Make sure a memory card that has images recorded on it has been inserted into
the camcorder.
1. With an image in the display, open the menu and select CARD
OPER.
2. Select PRINT MARKS
ALL ERASE.
• ERASE ALL PRINT MARKS ? YES NO appears in the display.
3. Select YES.
• The
print mark disappears from the image.
4. Close the menu.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing Still Images
E
REC
REC
SEARCH
SEARCH
SLIDE
SHOW
CARD
This section describes how to erase the still image from the Card Operation
submenu when playing back a single image in CARD PLAY (VCR) mode.
(SINGLE or ALL)
You can also erase a still image through CARD PHOTO REVIEW ( 114) or
File Operation menu ( 115).
PLAY
CARD
+
(VCR)
CARD OPER.
IMAGE ERASE
(
40)
Make sure a memory card that has images recorded on it is inserted into the
camcorder.
To erase images one at a time
1. Select the image you want to erase.
• Use the index screen ( 112) or card jump function ( 112) if necessary
and make sure the image you want to erase fills the display.
• If you use the index screen, press the
index screen button after selecting
the image. The image you selected fills the whole display.
2. Open the menu and select CARD OPER.
3. Select IMAGE ERASE.
• CANCEL, SINGLE and ALL settings appear.
• To cancel erasing, select CANCEL and close the menu.
4. Select SINGLE.
• ERASE THIS IMAGE? NO YES appears in the display.
5. Select YES.
• The image erases and the previous image appears for erasing.
• To erase another single image, move to that image with the CARD +/–
buttons, and select YES.
• If the image you are trying to erase is a protected image, YES appears in
purple and is unselectable.
• If you select NO, you return to step 4.
6. Close the menu.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all images on the memory card at once
E
1. Open the menu and select CARD OPER.
2. Select IMAGE ERASE.
• CANCEL, SINGLE and ALL settings appear.
• To cancel erasing, select CANCEL and close the menu.
3. Select ALL.
• ERASE ALL IMAGES? [EXCEPT FOR
the display.
IMAGES] NO YES appears in
4. Select YES.
• All images except the protected ones are erased.
• If you select NO, you return to step 2.
5. Close the menu.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Combining Images and Recording Them to a Cassette (Card Mix)
Liven up your productions by superimposing one image on top of the other.
Combine 2 still images or a still image and a moving image. Choose a still image
from the memory card, either one of the pre-recorded sample images ( 129) or
one you have recorded yourself, then combine it with the currently recording
image, moving or still.
E
Select from 3 types of Card Mix effects:
CARD CHROMA (Card chroma key)
The currently recording image appears in place of the blue area of a pre-recorded
still image such as a picture frame. When recording your own still image for
overlapping, make sure to record the area in which you want the new image to
appear blue, with a blue curtain as a background, for example. Adjust the mix
level in the blue area of the pre-recorded image.
Image being recorded by the
camcorder
Still image
CARD LUMI. (Card luminance key)
The currently recording image appears in place of the light area of a still picture
such as a handwritten illustration or title. Make your own by drawing or writing
on a white piece of paper. Adjust the mix level in the light area of the still image.
Still image
Image being recorded by the
camcorder
121
Download from Www.Somanuals.com. All Manuals Search And Download.
CAM. CHROMA (Camera chroma key)
Superimpose the currently recording image on top of a still image, which
becomes its background. Shoot the subject of the currently recording image
against a blue background, such as a blue curtain. The original still image will
appear in place of the blue area. Adjust the mix level in the blue area.
E
Image being recorded by the
camcorder
Still image
Mix level
The mix level bar appears. Adjust the mix level using the –and + at the ends of
the bar as guides.
REC
REC
SEARCH
SEARCH
TAPE
CAMERA
+
–
MIX LEVEL•••
+
CARD MIX
MIX TYPE••••CARD CHROMA
(
40)
Make sure a memory card that has images recorded on it and a cassette have been
inserted into the camcorder.
Select
1. Make sure the camcorder is set to the Q (program AE) mode.
• You cannot use Card Mix in the Night recording program.
\
2. Open the menu and select
CARD MIX.
3. Press the CARD +/– buttons to select the still image to be
combined.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select MIX TYPE.
• CARD CHROMA, CARD LUMI., CAM. CHROMA settings appear.
E
5. Select the desired setting.
• Your currently recording image is combined with the pre-recorded still
image.
6. Select MIX LEVEL.
7. Adjust the mix level.
• Turning the selector dial upwards adjusts to the right and turning
downwards adjusts to the left.
8. Close the menu.
• CARD MIX flashes in the display.
On/Off
9. Press the card MIX button.
• CARD MIX stops flashing.
• Your currently recording image is combined with the pre-recorded still
image.
• Each time you press the card MIX button, your selection is activated
(display lights continuously) or deactivated (display flashes).
For movies
1. Press the start/stop button to start and stop recording.
• The combined images are recorded onto the cassette.
For stills
1. Press the PHOTO button halfway down and hold it.
• F flashes white in the display as the camcorder adjusts the focus and it is
displayed continuously as a green mark when the camcorder is ready to take
the image.
2. Press the PHOTO button fully down to record the image to the
cassette.
• F disappears from the display.
• The combined images are recorded onto the cassette for approximately 6
seconds (
8 seconds in the SP or LP recording mode).
Notes:
• If you change the position of the POWER switch, select your still image for
Card Mix again.
• When setting Card Mix, you must carry out steps 1 to 5.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Still Images from a Cassette
REC
REC
E
SEARCH
SEARCH
Copies multiple still images from a tape to the memory card, using the Photo
Search function.
• The still images data codes will reflect the date and time the copies are made.
’
PLAY
TAPE
+
(VCR)
[
COPY
]
CARD OPER.
(
40)
Make sure a memory card that has enough memory available and a recorded
cassette have been inserted into the camcorder.
1. Locate the first still image on the cassette that you want to copy
and stop the cassette at a point before that image.
• All the still images on the cassette after that point will be copied onto the
memory card.
• If you want to copy all the images on a cassette, rewind the cassette to the
beginning.
2. Open the menu and select CARD OPER.
[
]
3. Select COPY
.
• CANCEL and EXECUTE settings appear.
4. Select EXECUTE.
• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
[
]
• NOW COPYING
appears in the display.
• The camcorder automatically performs the Photo Search function to locate
still images and copying starts. The currently copying image appears in the
display.
• Copying stops when the cassette is finished or the memory card is full.
When the memory card is full, CARD FULL will appear in the display.
5. Press the stop button when your desired images have finished
copying.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Memory Card Still Images to a Cassette
REC
REC
FOCUS
AE SHIFT
E
SEARCH
SEARCH
SLIDE SHOW
Copies multiple still images from the memory card to a cassette.
• The still images’data codes will reflect the date and time the copies are made.
•
The SP and LP recording modes are not available when copying
memory card images to a cassette.
[
COPY
]
CARD OPER.
(
40)
Make sure a memory card that has images recorded on it and a cassette that has
enough recordable space have been inserted into the camcorder.
PLAY
TAPE
+
(VCR)
1. Locate the point on the cassette where you want to start copying
and set it to stop.
PLAY
CARD
+
(VCR)
2. Select the first image you want to copy by using the CARD +/–
buttons.
• Still images on the memory card including and after that image will be
copied onto the cassette.
• If you want to copy all the still images on the memory card, select the first
image.
3. Open the menu and select CARD OPER.
[
]
4. Select COPY
.
• CANCEL and EXECUTE settings appear.
5. Select EXECUTE.
• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
[
]
• NOW COPYING
appears in the display.
• Each image is copied for about 6 seconds on the cassette.
• Copying stops when all the images have been copied or the tape is full.
7
6. Press the button when your desired images have finished
copying.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting a Memory Card
E
Format new memory cards, if you get the message CARD ERROR, or to
permanently and quickly erase all the images on a memory card, including
protected images (this includes the pre-recorded card mix sample images).
The MultiMediaCard supplied with this camcorder has already been formatted for
you.
• Be cautious when formatting recorded memory cards. All images will be
permanently erased.
• If you use memory cards other than the supplied one, make sure to format them
with the camcorder, not a PC or other device.
PLAY
CARD
+
(VCR)
CARD OPER.
FORMAT
(
40)
Make sure a memory card is inserted into the camcorder.
1. Open the menu and select CARD OPER.
2. Select FORMAT.
• CANCEL and EXECUTE settings appear.
3. Select EXECUTE.
• Select CANCEL to cancel formatting.
• FORMAT THIS CARD? NO YES appears to confirm.
4. Select YES.
• Formatting starts.
• If you select NO, you return to step 3.
5. Close the menu.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilizing memory card still images on a PC
You can download still images from a memory card to a PC connected to the
camcorder via the USB interface. By using the software provided, you can
organize, store and print out still images. When printing still images, you can add
titles and frames to them.
E
Use the USB cable and the Canon Digital Video Solution Disk software provided
with the camcorder.
• For details on how to connect the camcorder to a PC and install and operate the
software, refer to the Canon Digital Video Solution Disk instrucion manual.
• Refer also to your PC manual.
: Signal flow
IFC-300PCU USB cable
1. Install the software.
2. Connect the camcorder and the PC with an USB cable.
3. Turn the camcorder’s POWER switch to PLAY (VCR) and move
the TAPE/CARD switch to CARD.
• P“C CONNECT [USB]”appears in the display to indicate that USB
connection is being performed.
4. Install the USB driver.
5. Start the software and download still images from the memory
card to the computer.
Caution:
• The connection may not work properly depending on the specifications and
settings of the software and PC.
• The image files on your memory card and the image files you have stored
(downloaded) to the hard disk drive of your computer are your valuable,
original image files. If you wish to use image files on your computer, be sure to
make copies of them first, and use the copied file, retaining the original.
Notes:
While performing USB connection:
• The buttons, excluding the POWER switch, on the camcorder cannot be used.
•
Even if BUTTONLIGHT is set to ON through the menu, buttons do not light up.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information and Precautions
The camcorder formats memory cards in DCF (Design rule for Camera File
system).
Images recorded on a memory card with this camcorder can also be transferred to
a PC with the use of the following products made for MultiMediaCards or SD
Memory Cards:
E
PC Card Adapter: Holds a memory card then inserts into the PC card slot found
on most types of laptop PCs.
USB Card Reader: Connects to a PC, then accepts a memory card
.
FD Adapter: Holds a memory card then inserts into a PCs’ floppy disk drive.
Memory Cards confirmed to operate with this camcorder (as of January
2002)
MultiMediaCard—
SanDisk: 8 MB, 16 MB, 32 MB, 64 MB
SD Memory Card—
Panasonic: 8 MB, 16 MB, 32 MB, 64 MB
SanDisk: 8 MB, 16 MB, 32 MB, 64 MB
• However, we cannot guarantee that all of these memory cards work properly.
If you mistakenly erase the card mix sample images provided on the
MultiMediaCard, they can be downloaded from the following home page:*
http://www.canondv.com
* If you are unable to connect the camcorder to a PC using a USB cable, you will
need a PC Card Adapter or USB Card Reader to be able to download to a
memory card.
Memory card operating precautions
• If you purchase additional memory cards, format them with the camcorder, not
a PC or other device. There have been cases where memory cards formatted
with a PC or other device do not function properly.
• We recommend saving backups of memory card images on your PCs’ hard
drive or other external memory device. Image data may be damaged or lost due
to a defect in a memory card, or if a memory card is exposed to static
electricity. Contents of a memory card cannot be compensated for should data
become damaged or lost.
• Do not remove the power source or the memory card while the card access
indicator flashes.
• Do not use memory cards in places subject to strong magnetic fields.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not disassemble memory cards.
• Do not bend or drop memory cards, or expose them to strong vibrations or
external shocks.
E
• Do not get memory cards wet.
• Do not remove the memory cards’ label or affix other labels. Affix labels to the
memory cards’ case.
• Do not leave memory cards in places subject to high temperature or high
humidity.
• Moving a memory card rapidly between hot and cold temperatures may cause
condensation to form on it, leading to malfunctions. Avoid this problem by
placing the memory card in a plastic bag and letting it slowly adjust to
temperature changes before removing it from the bag. If condensation should
occur, maintain the memory card at a constant temperature and let the moisture
evaporate naturally.
• Do not touch the memory cards’ terminals or let dust or dirt come in contact
with the terminals. Store and carry memory cards in their case to protect the
terminal area.
• There is only one correct way to insert memory cards into the camcorder. Do
not forcefully insert the memory cards backwards or upside down. This could
damage the memory card or the camcorder.
Sample images
• The following are the sample images that have been pre-recorded on the
included MultiMediaCard. There are a total of 15 images: 8 Card chroma key
images, 5 Card luminance key images and 2 Camera chroma key images.
Card chroma key
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Card luminance key
E
Camera chroma key
• The pre-recorded sample images on the MultiMediaCard included with this
camcorder are intended solely for the personal enjoyment gained from
combining them with personal videos taken with this camcorder. Do not use the
pre-recorded sample images for any other purpose.
MultiMediaCard MMC-8M Specifications
Capacity
8 MB
Interface
Operating temperature range
Dimensions
MultiMediaCard standard
32°F–140°F (0°C–40°C)
32 × 24 × 1.4 mm
1.5 g
Weight
Weight and dimensions are approximate
Errors and omissions excepted.
Subject to change without notice.
PhotoEssentials - Royalty Free Stock Photography
The PhotoEssentials suite of royalty-free images on CD-ROM features premium quality
assignment photography and is ideally suited for use in advertising, brochures, reports,
multimedia, websites, books, packaging and more.
For more information, please visit their website www.photoessentials.com
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Camcorder
Adjust the viewfinder
E
• Set the camcorder to TAPE CAMERA
mode. Extend the viewfinder straight
out, then adjust the viewfinder focusing
lever to suit your eyesight.
• Rotate the viewfinder to an angle that
allows you to view comfortably. Store
the camcorder with the viewfinder flush
with the body of the camcorder.
• To view with the viewfinder, make sure
the LCD panel is either turned so that
the subject can monitor viewing, or
totally closed with the screen facing
inwards.
Be careful not to leave the viewfinder exposed to bright sunlight, or it will
melt. (The light is concentrated by the viewfinder lens.) Adjust the angle of the
viewfinder to prevent sunlight from entering.
Prepare the lens cap
• Attach the cord to the lens cap, and
pass the grip belt through the loop on
the cord.
• Hook the lens cap on to the grip belt
while you are recording, and place it
over the lens when you have finished.
Fasten the grip belt
• Release the Velcro fastening and hold
the camcorder with your right hand
while you adjust the belt with your left.
Your index finger should reach the
zoom control and photo button, and
your thumb should reach the start/stop
button comfortably.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach the shoulder strap
E
• For extra security and portability, attach
the shoulder strap before using the
camcorder.
• Pass the ends through the attachment
bars and adjust the length as shown.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Using the Batteries
Charging and recording times
E
• These times vary — the safest policy is always to have 2 or 3 times as many
battery packs as you think you will need.
• You will get more recording time if you turn the camcorder off between shots,
instead of leaving it in record pause mode.
Maximum recording time
Time needed for
full recharge
Using viewfinder Using LCD screen
BP-512
1 hr. 20 min.
1 hr. 20 min.
2 hr. 15 min.
3 hr. 15 min.
2 hr. 45 min.
2 hr. 45 min.
5 hr. 50 min.
9 hr. 15 min.
2 hr. 15 min.
2 hr. 15 min.
4 hr. 40 min.
7 hr. 25 min.
BP-511 (optional)
BP-522 (optional)
BP-535 (optional)
Maximum recording time
Using viewfinder Using LCD screen
Time needed for
full recharge
BP-508
1 hr.
1 hr. 30 min.
2 hr. 45 min.
2 hr. 45 min.
5 hr. 50 min.
9 hr. 15 min.
1 hr. 15 min.
2 hr. 15 min.
2 hr. 15 min.
4 hr. 45 min.
7 hr. 40 min.
BP-512 (optional)
BP-511 (optional)
BP-522 (optional)
BP-535 (optional)
1 hr. 20 min.
1 hr. 20 min.
2 hr. 15 min.
3 hr. 15 min.
• You can use the battery pack between 32° and 104°F (0° to 40°C), but it works
best between 50° and 86°F (10° to 30°C). Operating time will be shorter than
usual at low temperatures like a ski ground. For better operating results, the
battery pack can be warmed in your pocket or someplace and then used.
• If the battery pack starts to give you much less operating time than usual (at
normal temperatures), it has reached the end of its life and must be replaced.
Note:
• These figures show how long you can view playback with the LCD, after
attaching a fully-charged battery pack. Playback time will be shortened at low
temperatures.
Playback time (using the LCD screen)
BP-512
2 hr. 15 min.
2 hr. 15 min.
4 hr. 45 min.
7 hr. 40 min.
BP-511 (optional)
BP-522 (optional)
BP-535 (optional)
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback time (using the LCD screen)
1 hr. 15 min.
E
BP-508
BP-512 (optional)
BP-511 (optional)
BP-522 (optional)
BP-535 (optional)
2 hr. 20 min.
2 hr. 20 min.
4 hr. 55 min.
7 hr. 50 min.
How much power is left?
The indicator in the display shows you
approximately how much charge the
battery pack has left:
100%
75%
50%
25%
↓
↓
↓
↓
Notes:
• When the power is completely
exhausted, “CHANGE THE
BATTERY PACK”appears in the
display for 4 seconds and the empty
battery mark starts to flash. The
power indicator light also flashes.
• The indicator is not constant —
different levels will be shown when
you subject the battery pack and
camcorder to different conditions.
0%
CHANGE THE BATTERY PACK
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a
conventional battery pack, it does not have to be fully discharged first. However,
as the battery pack will naturally discharge itself over time, it is best to charge it
the same day you plan to use it, or the day before.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking care of the battery pack
E
Always attach the terminal cover.
• Do not allow any metal objects to
touch the terminals, as this can cause
a short circuit and damage the battery
pack. Attach the terminal cover
whenever the battery pack is not
being used.
B
D
Keep the terminals clean.
• The camcorder adapter or battery pack will not work properly if the terminal
are dirty. Attach the terminal cover whenever the battery pack is not being used.
Storing the battery pack
• If you do not use a battery pack for a period of more than a few months any
remaining charge may cause damage to the battery pack, and reduce usage time.
To prevent damage therefore, aim to use a battery packs’ complete charge
before storage. See the optional battery packs’ instructions for further details.
Installing the backup battery
Open the backup battery cover on the battery
attachment unit, and insert the CR2025 lithium
battery with the + side facing outwards. Click
the cover back into place.
This backup battery allows the camcorder to
remember the date and time and other settings
when main power source is removed. It has a
life span of about a year.
When it needs replacing (or if it has not been
installed), the y mark flashes in the display.
Remove the old battery by pushing up then
releasing and lifting out. Make sure to attach a power source to the camcorder
first, so it will remember your chosen settings when you change the battery.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
DANGER!
Treat the battery pack with care.
E
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures greater than 140°F (60°C).
Do not leave it near a heater, or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 212°F (100°C) or
incinerate.
• Replace the battery with a Sony, Hitachi Maxell, Sanyo or Panasonic CR2025,
or Duracell DL2025. Use of another battery may present a risk of fire or
explosion.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause
a short circuit.
• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the battery pack out of reach of children — if it is swallowed, contact a
physician immediately, as the battery case may break down and the battery
fluids damage the stomach and intestines.
• Do not disassemble, heat or immerse the battery in water, to avoid the risk of
explosion.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cautions
E
Avoid high temperatures and high humidity.
• Do not leave the camcorder inside a car in hot weather, for example.
• Be careful of heat radiating from video lighting equipment.
• Do not take the camcorder into a humid room.
Avoid sudden changes in temperature.
• If you take the camcorder from a cold place to a warm place, condensation may
form on the lens and internal parts (
140).
Do not point the lens or viewfinder at strong light sources.
• Never point it at the sun, and do not leave it aimed at a bright subject.
• Be especially careful when leaving the camcorder on a tripod.
Avoid magnetic or electric fields.
• Do not use the camcorder close to TV transmitters, portable communication
devices or other sources of electric or magnetic radiation. They may cause
picture interference, or permanently damage the camcorder.
Do not expose the camcorder to water.
• Cover the camcorder when you are recording in rain or mist.
• There is a risk of electric shock if water gets inside the camcorder — contact
qualified service personnel as soon as possible.
Protect the lens.
• Sand and dust can damage the lens — be especially careful on windy days.
Handle the camcorder gently.
• Vibration or shock can cause damage.
• Do not use the viewfinder or LCD panel as a carrying handle.
Do not disassemble the camcorder.
• This is very dangerous as there is a risk of electric shock — if the camcorder
does not function properly, take it to qualified service personnel.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
E
If you do not intend to use the camcorder for some time, store it in an area which
is free of dust and moisture, and where the temperature is no higher than 86°F
(30°C). After storage, check each part and function of your camcorder to make
sure everything is still working properly.
Note:
• These cautions also apply to accessories such as battery packs and cassettes.
Maintenance
Viewfinder
• Clean the viewfinder screen. Rotate the
viewfinder upwards. Remove the
viewfinder protect cover and clean by
inserting a cotton swab. When finished,
return it flush with the camcorder.
• The viewfinder screen scratches easily.
Take care when cleaning.
LCD
• Clean the LCD screen using a
commercially available cleaning cloth for
glasses.
• Where there is a big change in
temperature, moisture may form on the surface of the screen. Wipe clean with a
soft, dry cloth.
• At low temperatures the display may appear to be much darker than usual. This
is not a fault, and as the screen warms up the display will return to normal.
Camcorder body and lens
• Use a soft, dry cloth to clean the camcorder body or lens. Never use chemically
treated cloth or volatile solvents such as paint thinner.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Video heads
• When mosaic-like noise appears on the playback picture,
the video heads may be dirty. When the video heads are
badly contaminated, the camcorder may show a blank blue
screen or a warning.
E
• For the best picture possible, after using the camcorder for
approximately 20 hours, clean the video heads using Canons’ DVM-CL Digital
Video Head Cleaning Cassette. If the “noise”remains, repeat the cleaning (up
to maximum of 5 times).
• Do not use a wet-type cleaning cassette, as this can cause damage.
Using the camcorder abroad
Power sources
• You can use the compact power adapter to operate your camcorder and charge
battery packs in any country where the electricity supply is between 100 and
240 V AC, 50/60 Hz. Contact your Canon dealer for information about plug
adapters for overseas use.
TV playback
• Although you can always play back your recordings on the LCD screen, your
camcorder can only be connected to TVs which use its NTSC system. This TV
system is used in the following countries:
American Samoa, Bahama, Barbados, Bermuda, Bolivia, Canada, Chile,
Columbia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala,
Greenland, Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia,
Myanmar, Nicaragua, Panama, Peru, Philippines, Puerto Rico, Saint Lucia,
Surinam, Taiwan, Trinidad and Tobago, USA, Venezuela.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensation
E
Condensation may form on the camcorder when it is moved from a cold place to a
warm place. Using the camcorder while condensation is present can damage both
the tape and the camcorder.
Condensation may become a problem:
When you take the camcorder from a cold
place to a warm room
When a cold room is heated rapidly
When the camcorder is left in a humid
room
When the camcorder is taken from an air-
conditioned room to a warm, humid place
Protecting the camcorder from condensation
• Before you take the camcorder to a warm or humid place where condensation is
likely to be a problem, unload the cassette and put the camcorder in a plastic
bag. Wait until the camcorder reaches room temperature before you take it out
of the bag.
What happens when condensation is detected
• C“ ONDENSATION HAS BEEN DETECTED”is displayed for approximately
four seconds. Then, the power indicator flashes and the mark flashes in the
h
display. If there is a cassette in the camcorder, it stops automatically and
R“ EMOVE THE CASSETTE”is displayed for approximately 4 seconds and
then v flashes in the display. If you have the beep turned on, it will sound.
• The camcorder may not detect the condensation immediately — the
condensation warning may not start flashing for 10 to 15 minutes.
• You cannot load a cassette when condensation is detected.
What you should do
• Remove the cassette, leave the cassette compartment open, and turn the
camcorder off.
• Leave it in a dry place until the condensation evaporates. After the condensation
warning stops flashing, wait at least another hour before trying to use the
camcorder.
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
E
Make sure that the camcorder is properly connected if you are using it with a TV
or VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Cause and/or what to do about it
Problem
• The camcorder is not set to the
? Nothing happens when I press the
appropriate mode (
• The cassette is not loaded or is set for
erasure prevention ( 18-19).
20, 30).
buttons.
• The cassette has reached the end.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
(
13-17, 134).
• The function cannot be used in that
recording program ( 59).
? The camcorder turned itself off.
• The camcorder was in record pause
mode for more than about 5 minutes
(
20, 107, 153).
• The battery pack is exhausted
14-17, 134).
(
? The cassette compartment stopped
mid-operation while
• The battery packs’ power is exhausted.
Recharge or change to a new battery
loading/unloading a cassette.
pack (
• The cassette is not loaded or is set for
erasure prevention ( 18-19).
14-17).
? The start/stop button doesn’t work.
• The cassette has reached the end.
• The camcorder is not set to the
? There’s no picture in the display.
appropriate mode (
20, 30).
• You are attempting to play back or
record copyright protected material
? There’s a blank blue screen in the
display.
(
89).
• The video heads are badly
contaminated ( 139).
141
Download from Www.Somanuals.com. All Manuals Search And Download.
• The camcorder is on manual focus
79).
• The viewfinder lens needs adjusting
131).
• The lens is dirty (
? The camcorder won’t focus.
(
E
(
138).
Note:
• Some subjects are not suitable for autofocus. In these situations, you will often
get better results using manual focus ( 79). Focus on something which is
about the same distance away, lock the focus, and then point the camcorder at
your original, hard-to-focus subject.
Horizontal stripes Many subjects at
different distances
Behind glass
Dark subjects
Without much
contrast (e.g. a
white wall)
Night scenes
Reflective surfaces
(e.g. shiny car
surfaces)
Fast moving
objects
Recording/Playback (Cont.)
Problem
Cause and/or what to do about it
? Some/all of the digital effects don’t • There are a number of restrictions on
work. using the digital effects. ( 63-67).
? The e (play) button doesn’t work. • The camcorder is not set to TAPE
PLAY (VCR) mode ( 30).
• The cassette is not loaded ( 18).
• The cassette has reached the end.
? There’s a bright stripe on the
• When recording in dark places a
bright light in the scene may cause a
vertical light bar (“smear”) to appear.
This is a normal feature of
camcorders.
screen.
? The playback picture is rough
• The video heads need cleaning
(with mosaic-like noise).
(
139).
142
Download from Www.Somanuals.com. All Manuals Search And Download.
• AV/PHONES is not set to AV in the
menu ( 34).
• AV \DV OUT (Analog-digital
converter) is not set to OFF in the
menu ( 93).
? There’s no picture on the TV
screen.
E
• The video heads need cleaning
? There’s no picture on the TV
screen, even though the tape is
moving.
(
139).
• The TV/VIDEO selector on the TV
isnt’ set to VIDEO ( 35-36).
• The speaker has been turned off with
the selector dial ( 33).
• Headphones are being used.
? There’s no sound coming from the
speaker during playback.
Memory card operations
Problem
Cause and/or what to do about it
? The memory card will not insert.
• It is not turned the right way
(
104). Turn it the right way and
try inserting again.
? The
mark flashes red in the
• Turn the camcorders’ power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
display even though a memory
card has been inserted.
? Nothing happens when I press the
• The camcorder is not set to CARD
CAMERA or CARD PLAY (VCR)
mode ( 107, 111).
buttons.
• The memory card is not inserted
(
104).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
• The memory card is full. Erase
images ( 114) or insert a new
memory card.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
(
13-17, 134).
• The function cannot be used in that
recording program ( 59).
143
Download from Www.Somanuals.com. All Manuals Search And Download.
• The memory card is not loaded
104).
? The PHOTO button doesn’t work.
(
E
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 114) or insert a new
memory card.
• You have reached the maximum file
number. Set the file numbering to
RESET through the menu ( 106)
and insert a new memory card.
• You are using an unformatted
memory card. Format the card
(
126).
• The image is protected ( 113).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
? The image cannot be erased.
Miscellaneous
Problem
Cause and/or what to do about it
? The wireless controller doesn’t
• The remote sensor mode is set to
OFFB in the menu ( 50).
work.
• The remote sensor modes of the
wireless controller and the camcorder
itself are different ( 50).
• The batteries are dead or not inserted.
? The power indicator is flashing.
? The camcorder malfunctions.
• Check the screen displays ( 149).
• External interference may cause the
camcorders’ microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
? The DV cable is connected
correctly, but there’s nothing in
the display.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
? The camcorder becomes warm
• This is not a malfunction.
during use.
144
Download from Www.Somanuals.com. All Manuals Search And Download.
The ZR50 MC/ZR45 MC System Diagram (Availability differs from area to area)
E
WS-20 Wrist Strap
SS-800 Shoulder Strap
WD-30.5 Wide-
converter
MiniDV
Video
Cassette
WL-D77
Wireless
Controller
BP-500 Series
Battery Pack
TL-30.5 Tele-
converter
CR-560 Charge Adapter/
Car Battery Cable Kit
FS-30.5U
Filter Set
CA-560 Compact
Power Adapter
BP-500 Series
Battery Pack
ZR-1000 Zoom
Remote Controller
S-150 S-video Cable
TV
VCR
VL-3 Video Light
STV-250N Stereo Video Cable
CV-150F DV Cable
DM-50 Directional
Stereo Microphone
Digital Device
PC Card Adapter
USB Card Reader
FD Adapter
MultiMediaCard
or
SD Memory Card
BP-900 Series
Battery Pack
VL-10Li
Battery
Video Light
IFC-300PCU USB Cable
Personal Computer
Stereo Microphone
(commercially
available)
SC-1000 Soft
Carrying Case
SC-A50 Soft
Carrying Case
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accessories.
You can also obtain genuine accessories for your Canon camcorder by calling:
1-800-828-4040, Canon U.S.A. Information Center.
E
BP-500 Series Battery Packs
BP-522
BP-535
BP-512
The battery pack BP-508 is not available as
an option. When you need extra battery
packs, select from the following: BP-511,
BP-512, BP-522 and BP-535.
CR-560 Charge Adapter/Car Battery
Cable Kit
Connect the car battery cable to power your
camcorder or recharge battery packs on the
move. The car battery cable plugs into your
cars’ cigarette lighter socket and runs off a
12-24 V DC negative ground battery.
Also, when used with the CA-560 Compact
Power Adapter, this charge adapter can
charge the BP-500 series lithium ion
battery packs from an AC outlet.
TL-30.5 Tele-converter
This tele-converter lens increases the focal
length of the camcorder lens by a factor of 1.9.
• The image stabilizer is not as effective as
usual when the tele-converter is attached.
• With the TL-30.5 Tele-converter, the
image quality may be degraded at the
telephoto side.
WD-30.5 Wide-converter
This lens decreases focal length by a factor
of 0.7, giving you a wide perspective for
indoor shots or panoramic views.
FS-30.5U Filter Set
Neutral density and MC protector filters to
help you take control of difficult lighting
conditions.
146
Download from Www.Somanuals.com. All Manuals Search And Download.
VL-3 Video Light
Attach the Video Light to a camcorder
when recording in dark rooms. When on its
automatic setting, the Video Light turns
on/off automatically according to the
brightness level of shooting conditions.
E
VL-10Li Battery Video Light
This compact yet powerful video light can
be used for both indoor and outdoor
shooting.
• Use the BP-900 Series battery packs to
power the light. Approximate usage times
are as follows:
BP-915 60 min. BP-930 120 min.
BP-945 170 min.
• Charge the BP-900 Series battery packs
with the CA-910 Compact Power Adapter
(optional).
DM-50 Directional Stereo
Microphone
This highly sensitive, super-directional
microphone attaches to a camcorders’
advanced accessory shoe. It is a highly
sensitive microphone that can be switched
between functioning as a directional
microphone (monaural) or a stereo
microphone that also clearly picks up
sounds arriving from the front of the
microphone, for full recorded sound.
Zoom Remote Controller ZR-1000
When this product is plugged into the
LANC m terminal of a Canon camcorder, it
is possible to control functions such as the
start and stop of recording and the zoom
and focusing functions while the camcorder
is mounted on a tripod, without touching
the camcorder body itself.
WS-20 Wrist Strap
Provides an extra measure of protection for
active shooting.
147
Download from Www.Somanuals.com. All Manuals Search And Download.
SC-1000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
E
SC-A50 Soft Carrying Case
This lightweight bag keeps the camcorder
within easy reach without weighing you
down or getting in the way. Genuine
leather.
E
N
N
O
U
N
IN
A
C
This mark identifies genuine Canon video accessories. When you
use Canon video equipment, we recommend Canon-brand
accessories or products bearing the same mark.
E
Y
I
D
R
E
O S
O
S
A
C
E
Provided accessories:
Optional accessories:
WL-D77 Wireless Controller D83-0582-000
CA-560 Compact Power
CR-560 Charge Adapter/
Car Battery Cable Kit
3172A002AA
(D82-0680-201)
3055A002AA
(D85-1112-201)
3174A002AA
(D85-1122-201)
6741A002AA
Adapter
BP-512 Battery Pack
BP-508 Battery Pack
3171A007AB
6760A002AA
D85-1360-000
BP-511 Battery Pack
BP-522 Battery Pack
BP-535 Battery Pack
STV-250N Stereo Video Cable 3067A002AA
(D82-0590-201)
SS-800 Shoulder Strap
Lens cap
D81-1420-000
D52-0100-000
SC-1000 Soft Carrying Case 3083A001AA
(D81-1200-201)
SC-A50 Soft Carrying Case D81-1302-201
WD-30.5 Wide-converter
TL-30.5 Tele-converter
FS-30.5U Filter Set
VL-3 Video Light
6739A001AA
6740A001AA
6738A001AA
3175A002AA
(D86-0121-201)
VL-10Li Battery Video Light 3140A002AA
(D86-0081-201)
JR 7.2V 10WF Halogen Bulb 3141A002AA
(D86-0090-201)
DM-50 Directional Stereo
Microphone
ZR-1000 Zoom Remote
Controller
3176A002AA
(D84-0120-201)
3089A002AA
(D83-0540-201)
3118A002AA
(D81-0190-202)
3134A002AA
(D36-0032-201)
WS-20 Wrist Strap
DVM-CL Digital Video
Head Cleaning Cassette
148
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Displays
To display the date and time, press the DATA
CODE button. See also p. 82.
E
TV
SCREEN
Press the wireless controllers’ TV SCREEN
button or turn TV SCREEN on through the
menu to see the other displays on the TV
screen. (The displays appear white on-screen.)
They will not be added to any recordings you
make with the camcorder.
DATA
CODE
TAPE
CAMERA
CARD
CAMERA
+
+
,
DISP. SET UP
TV SCREEN•••ON
(
40)
To turn TV SCREEN off, open the menu and select DISP.SET UP.
Then select TV SCREEN, set it to OFF and close the menu.
For instructions on how to hook the camcorder up to your TV, see p. 34.
Turning off the LCD screen displays
You can turn off the displays to give you a clear screen for playback.
PLAY
(VCR)
PLAY
(VCR)
TAPE
CARD
+
+
,
DISP.SET UP
DISPLAYS••••ON
(
40)
To turn the displays off, open the menu and select DISP. SET UP.
Then select DISPLAYS, set it to OFF <PLAYBK> and close the
menu.
• If you turn the displays off, the LCD screen will be completely blank
(including connected TV screen), but the camcorder will continue to show
warning/caution displays when necessary, and the data code appears in the
display if it is set to ON.
• When operating the camcorder, the displays appear for 2 seconds. However,
the displays do not disappear when displaying an index screen.
indicates a flashing display.
Record pause mode
20)
The backup battery is
not properly installed,
or needs replacing
PAUSE
(
Recording (
21)
(
135).
REC
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Shows how much
battery power remains
Fast forward (
30)
FF
E
(
134).
REW
Rewind (
30)
The battery pack is
exhausted (
134).
Fast forward playback
(
31)
Rewind playback
31)
No cassette is loaded,
or it is set for erasure
prevention
(
Frame advance
playback (
31)
(
18, 19).
Frame reverse
playback (
Remaining tape
(Green: more than
five minutes.
Yellow: less than five
minutes.
31)
5min
Playback pause
(forward and reverse)
(
31)
Red: final few
seconds.)
Slow playback
(forward and reverse)
...finally, it tells you
when you have
completely run out of
tape.
(
31)
END
×2 playback (forward
and reverse) ( 32)
×2
×
2
The camcorder is
ejecting the tape
EJECT
EJECT
×1 playback (forward
×1
and reverse)
×
1
(
18).
(
30, 32)
5
The safety mechanism
is activated. Unload
the cassette and turn
the camcorder off.
Turn it on again and
reload the cassette.
Photo Search (
Date Search (
85)
85)
PHOTO SEARCH
DATE SEARCH
5
RTN
RTN
Zero set memory
(forward and reverse)
86)
Recording mode
SP
(
(
22)
AV Insert Editing
94)
(
Playback is stopped
30).
STOP
AV INSERT
AV INSERT
(
Normal playback
30)
(
Audio Dubbing
97)
(
AUDIO DUB.
AUDIO DUB.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote sensor is
turned off ( 50).
Zoom display (
Optical zoom
25):
W
T
E
W
T
Optical plus 88×/72×
digital zoom
Self-timer countdown
( 72)
10sec
SELF–T
W
T
Optical plus 440×/
360× digital zoom
Zero set memory
86)
0:00:00
M
(
W
T
Zoom in
Audio mode (
Data code (
70)
16bit
W
T
Zoom out
82)
F1.8
1/250
12:00 AM
JAN. 1,2002
The image stabilizer is
turned on (
58).
Photo mode (
56)
CAM.MENU
SEL.SE
MENUC
PHOTO
CAM. MENU
CARD MIX
(
42)
CAM.SET UP
VCR SET UP
• Setting the AF/AE. F
mark flashes white
DISP.SET UP
SYSTEM
RETURN
• AF/AE locked. F
mark lights up green
VCR MENU (
43)
VCR MENU
SEL.S
MENU
• Timer
VCR SET UP
CARD SET UP
CARD OPER.
DISP.SET UP
SYSTEM
6sec
Recording programs
RETURN
(
59).
AUTO
C. CAM. MENU
45)
C.CAM MENU
SEL.S
MENU
SPORTS
(
CAM.SET UP
CARD SET UP
VCR SET UP
DISP.SET UP
SYSTEM
PORTRAIT
SPOTLIGHT
SAND&SNOW
LOW LIGHT
NIGHT
RETURN
C.PLAY MENU
SEL.SE
MENUC
C. PLAY MENU
46)
Accessory is
CARD OPER.
VCR SET UP
DISP.SET UP
SYSTEM
(
C
attached to advanced
accessory shoe
RETURN
(
74, 75)
CARD PHOTO REVIEW
AE Shift (
76)
CARD PHOTO
REVIEW MENU
PROTECT
IMAGE ERASE
RETURN
AE +2.0
M.FOCUS
(
114)
Manual focus is
selected (
79).
FILE OPER.
FILE OPER. MENU
115)
Shutter speed (
77)
PROTECT
(
PRINT MARK
IMAGE ERASE
RETURN
1/250
151
Download from Www.Somanuals.com. All Manuals Search And Download.
White balance is
Mix balance (
Audio input (
100)
98)
(
80)
ST–1
ST–2
E
Set
Indoor
W
T
AUDIO IN
MIC.IN
DV IN
Outdoor
U
Microphone input
The 16:9 mode: the
display flashes when
the effect is being
selected, and appears
steadily when it is
16:9
DV input (
88, 110)
Analog-Digital
converter (
activated (
23).
92)
AV DV
Digital effects. The
display flashes when
the function is being
selected and appears
steadily when it is
FADE–T
WIPE
Condensation warning
140)
WIPE
(
M.FADE
ART
activated (
63).
BLK&WHT
SEPIA
MOSAIC
Memory Card Displays
No memory card is
inserted ( 104).
The wind screen is
WSON
turned on (
71).
Image quality
104):
(
Standard
STD
Volume level
(
33):
Speaker
Fine
FINE
SPEAKER
–
+
Folder number-File
101-0101
Headphones
PHONES
–
+
number (
106).
SPEAKER
OFF
SLIDE SHOW
Slide show in
progress(
112).
The AV/headphone
terminal is switched
to headphones
Recording to a
memory card
PHONES
>>>>
99
(
34)
(
108).
Audio output
STEREO1
STEREO2
MIX/FIXED
(
100)
MIX/VARI.
152
Download from Www.Somanuals.com. All Manuals Search And Download.
The number of still
images that can still
be recorded on the
memory card
Time Code
99
E
0:12:34:12
(
105).
(Green: 6 or more
images.
Yellow: Between 1
and 5 images
This records counter information,
including hour, minute, second, and
frame number on a special data code
area on the tape itself. It is reset
automatically when a new tape is
loaded. In TAPE CAMERA mode, the
frame number doesnt’ appear in the
display.
Red: No more images)
Accessing a memory
<<<< 9/99
card (
111).
Current still
Recording reminder
9/99
image/Total number
of still images on the
memory card
0sec
(
111).
Protect mark
10sec
(
113).
Card mix (
121).
CARD MIX
When you start recording, the
camcorder counts from 0SEC to
10SEC. Shots which are shorter than
ten seconds may be difficult to edit
later. On the other hand, if you are not
planning to edit the recording,
remember that a shot which does not
contain action should generally last no
longer than 10 seconds.
Print mark (
Data code (
113).
82).
12:00 AM
JAN. 1,2002
Formatting a memory
card ( 126).
“
AUTO POWER OFF”
AUTOPOWEROFF
Erasing still images
119).
(
• The camcorder will turn itself off if
you leave it in record pause mode for
more than about 5 minutes. This
display appears 20 seconds (approx.)
before the camcorder turns off.
Connecting to a PC
127).
(
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution phrases
E
Appears as a warning
to protect the cassette
and also when
The camcorder displays various
caution phrases — they appear for 4
seconds before disappearing.
REMOVE THE CASSETTE
condensation is
detected. Remove the
cassette as soon as
possible after the
camcorder has
Appears each time
you turn the power
on, until you set the
SET THE TIME ZONE,
DATE AND TIME
displayed the caution.
time zone, date and
time (
53).
Refer to p. 89
COPYRIGHT PROTECTED
Appears when the
battery pack is
exhausted
PLAYBACK IS RESTRICTED
CHANGE THE BATTERY PACK
(
134).
Refer to p. 89, p. 90
or p. 92
COPYRIGHT PROTECTED
DUBBING RESTRICTED
Appears when the
tape has reached the
end.
TAPE END
Appears when you try
to do audio dubbing
or AV insert on a tape
recorded in any mode
other than SP mode
CHECK THE CASSETTE
Refer to p.19
[
]
REC MODE
THE TAPE IS SET FOR
ERASURE PREVENTION
(
94, 97).
Appears when you try
to do audio dubbing
on a tape recorded in
16-bit audio or 12-bit,
4-channel mode
CHECK THE CASSETTE
Appears when, during
DV dubbing, the DV
cable is disconnected
or the power of the
digital equipment
connected to the
camcorder is turned
off.
[
]
AUDIO MODE
CHECK THE DV INPUT
(
97).
Appears when the
camcorder detects a
blank section of a tape
during audio dubbing
or AV insert
CHECK THE CASSETTE
[
]
BLANK
(
94, 97).
Refer to p. 140
CONDENSATION
HAS BEEN DETECTED
154
Download from Www.Somanuals.com. All Manuals Search And Download.
Appears immediately
after you start
Appears if you have
tried to mark 51 or
more images for
printing, or if a mark
file cannot be edited.
E
HEADS DIRTY,
recording, and the
video heads are badly
contaminated. Make
sure to clean the video
heads when this
PRINT MARK ERROR
USE CLEANING CASSETTE
(
113)
caution appears.
A memory card has
not been inserted into
the camcorder.
(
139)
NO CARD
(
104)
Memory card caution phrases
An error has occurred
with the memory card.
The camcorder cannot
record or play back. A
temporary card error
is also possible. If
There are no images
recorded on the
memory card.
CARD ERROR
NO IMAGES
CARD ERROR disappears after 4 seconds
and flashes red, turn the camcorders’
power off and back on again, and remove
and reinsert the card. If flashes green,
You are using an SD
Memory Card and it
is set for erasure pre-
vention. Change the
position of the protect
switch.
THE CARD IS SET FOR
ERASURE PREVENTION
recording or playing back is possible.
There is no more
remaining memory
on the memory card.
Change the card or
erase images.
CARD FULL
Appears when you
press the start/stop
button in CARD
CAMERA mode. The
image isnt’ recorded
on the cassette or
memory card.
IN CARD POSITION
You have reached the
maximum file or
folder number.
NAMING ERROR
(
106)
The image has been
recorded in an
incompatible JPEG
format or other
format that the
UNIDENTIFIABLE
IMAGE
camcorder cannot
play back, or the
image data has been
damaged.
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
ZR50 MC/ZR45 MC
E
Power Supply (rated): 7.4 V DC
Power Consumption (while recording
with the AF turned on):
3.3 W (Using viewfinder),
4.1 W (Using LCD screen)
3.3 W (Using viewfinder),
4 W (Using LCD screen)
Television system: EIA standard
(525 lines, 60 fields) NTSC color signal
Video recording system:
3 rotary heads, helical scanning
DV system (Consumer digital VCR
SD/SDL system)
Digital component recording
2 rotary heads, helical scanning
DV system (Consumer digital VCR SD
system)
Digital component recording
Audio recording system:
PCM digital sound: 16 bit (48kHz/2ch),
12 bit (32kHz/4ch)
Focusing system: TTL autofocus, manual
focusing possible
Minimum focusing distance: 3ft 33/8 in
(1 m) (3/8 in (1 cm) on maximum wide
angle)
Maximum shutter speed:1/8,000 sec.
(1/250 sec. when using a memory card)
Minimum illumination: 0.5 lx (using the
Night program in TAPE CAMERA
mode)
Recommended illumination:
More than 100 lx
Filter diameter: 30.5 mm
Viewfinder: 0.44 in, TFT color LCD,
approx. 113,000 pixels
LCD screen: 2.5 in measured diagonally,
TFT color, approx. 112,000 pixels
Microphone: Stereo electret condenser
microphone
Recording media: MultiMediaCard, SD
Memory Card
SP and LP: 12 bit only
(32kHz/2ch)
Image sensor: 1/6”CCD (charge coupled
device), approx. 460,000 pixels (approx.
290,000 effective pixels)
Number of recording pixels: 640 × 480
pixels
Image format: Design rule for Camera
File system (DCF), Digital Print Order
Format (DPOF) compliant (only images
marked for printing)
Tape format: Videocassettes bearing the
D mark.
Tape speed:
File format: JPEG (compression mode:
Fine/Standard)
Estimated MultiMediaCard MMC-8M
capacities (approx.)*:
Fine 60 images/Standard 105 images
* The actual number you can record varies
depending on the images. Remember that the
sample images recorded on the supplied
MultiMediaCard are included in the total
number.
SP: 3/4 ips (18.81 mm/s),
LP: 1/2 ips (12.56 mm/s),
SP: 3/8 ips (9.41 mm/s),
LP: 1/4 ips (6.28 mm/s)
Maximum recording time (with an 80
min. cassette):
SP: 80 min., LP: 120 min.,
SP: 160 min., LP: 240 min.
Fast forward/rewind time:
Approx. 2 min. 20 sec. (with a
60 min. cassette)
USB terminal: mini-B
DV terminal input/output:
Special 4-pin connector (conforms to
IEEE1394)
Lens:
AV/headphone terminal:
F/1.63–.6, 22 × power zoom,
f=2.86–1.6 mm (equivalent to
481–056 mm in 35 mm format)
F/1.62–.9, 18 × power zoom,
f=2.85–0.4 mm (equivalent to
488–64 mm in 35 mm format)
ø3.5 mm minijack
Audio input: –10dBV/ at least 40 kohms,
(L, R), unbalanced
output: 1–0dBV (47 kohm load)/
less than 3 kohms,
unbalanced
Video: 1 Vp-p/75 ohms unbalanced
156
Download from Www.Somanuals.com. All Manuals Search And Download.
S-video terminal input/output:
1 Vp-p (Y signal), 0.286 Vp-p (C signal)
MIC terminal input: ø3.5 mm stereo
minijack, –57 dBV (with 600 ohm mic)/
at least 5 kohms
E
LANC terminal: ø2.5 mm mini
u
minijack
Operating temperature range: 32–104 °F
(04–0 °C)
Dimensions: 21/4 × 37/8 × 55/8 in
(58 × 99 × 144 mm)
Weight: 1 lb 23/4 oz (530 g)
BP-512/BP-508 Battery Pack
Battery type: Rechargeable lithium ion
battery
Rated voltage: 7.4 V DC
Operating temperature: 32°1–04°F
(0°4–0°C)
Battery capacity:
1100 mAh
800 mAh
Dimensions: 11/2 × /8 × 21/8 in
7
(38 × 21 × 55 mm)
Weight:
21/2 oz (70 g)
21/4 oz (65 g)
Weight and dimensions are approximate
Errors and omissions excepted.
Subject to change without notice.
Canon is a trademark of Canon Inc.
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
16:9, 23
Î
Data Code, 82
E
Å
Date and Time, 55
Date Search, 85
Demo mode, 24
Digital Effects, 63
Digital Zoom, 25
DV Dubbing, 88
Abroad, Using the Camcorder, 139
Accessories, 8, 146
Adapter, AC, 13-15, 17
AE Programs, 59
AE Shift, 76
Analog-digital converter, 92
Analog line-in, 90
Audio Dubbing, 97
Audio Mix, 100
‰
Easy Recording, 61
Editing to a VCR, 87
Effects, 65
Audio Mode, 70
Audio Output, 100
Audio Recording and Playback,
70, 100
Audio/Video Terminal, 34
Auto, 61
Erasing Still Images from a
Memory Card, 114
Extended Recording Time
Function, 22
External Microphone, 70, 97
Autofocus, 79
AV Insert, 94
Ï
Faders, 64
Fast Forward, 30
Feedback, 36
File Numbers, 106
Finding Your Way Around the
ZR50 MC/ZR45 MC, 10
Focusing, 79
ı
Ç
Backup Battery, 135
Basic Recording, 20
Battery Charger, 16-17
Battery Pack, 14, 16-17, 133
Beep, 24
Buttons, light-up, 52
Formatting a Memory Card, 126
Ó
È
Cables, 8, 35
Cassettes, 18
Charging the Battery Pack,
14, 16-17, 133
Head Cleaning, 139
Headphones, 34
Choosing a Recording Program, 59
Cleaning the Camcorder, 138
Clock, 55
Combining Images, 121
Condensation, 140
Image Quality, 104
Image Stabilizer, 58
Index Screen, 112
Introducing the
ZR50 MC/ZR45 MC, 9
Connecting to a PC, 102, 127
Connection to TV or VCR, 34
Copying from Cassette to Memory
Card, 124
Copying from Memory Card to
Cassette, 125
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Ò
Â
LANC, 87
Recharging the Battery Pack, 134
Recording, 20, 107
Recording from Cassette to
Memory Card, 109
Recording from DV Device to
Memory Card, 110
E
LCD Screen, 27
Lens Cap, 131
Light-up Buttons, 52
Loading Cassettes, 18
Low Light, 62
LP Mode, 22
Recording Programs, 59
Record Pause Mode, 20
Record Review, 39
˜
Maintenance, 137
Record Search, 39
Making Better Videos, 37
Manual Focus, 79
Memory Card Introduction, 103
Menus, 40
Remote Control, 49
Remote Sensor, 49-50
Rewind, 30
Microphone, 70, 75, 97
Monitor Recording, 29
Multi-Image Screen, 68
Í
S1 video terminal, 35
Sample images, 129
Sand & Snow, 62
Screen Displays, 149
SD Memory Card, 103, 107, 128
Self-Timer, 72
Shutter Sound, 106
Shutter Speed, 77
Slide Show, 112
ˆ
Ø
∏
Night, 62
Optional Accessories, 146
Speaker, 33
Specifications, 15, 130, 156
SP Mode, 22
Sports, 61
Pause, Record, 20
PC Connection, 102, 127
Photo Search, 85
Spotlight, 61
Playback, 30
Still Picture, 56, 107
Storage, 138
S-video, 35
Playback Connection, 34
Playback Pause, 31
Portrait, 61
System Diagram, 145
Power Adapter, 13-15, 17
Powering Your Camcorder, 13
Pre-Marked Position, 86
Preparing the Camcorder, 131
Preventing Accidental Erasure, 113
Print Mark, 113
Problems, 141
Progressive Photo, 107
Protect, 113
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Ê
E
Tape Protection, 19
Telephoto, 25
Temperature,
15, 130, 133, 136, 157
Time Code, 153
Time Zone, 53
Tips for Making Better Videos, 37
Tripod, 37
Troubleshooting, 141
TV, 35, 149
◊
VCR, 34
Videocassettes, 18
Video Heads, 139
Video ID-1 system, 36
Video Light, 74, 147
Viewfinder, 131, 138
Viewing Still Images, 111
„
Û
White Balance, 80
Wide-angle, 25
Wide screen TV, 23
Wind Screen, 71
Wireless Controller, 49
Zero Set Memory, 86
Zooming, 25
160
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu at a Glance
Use the list below to quickly navigate the camcorders’ menu. Functions are listed
alphabetically.
E
First make sure the
camera is set to...
Then select it
Function
from this
submenu and set.
CAM.SET UP
DISP.SET UP
VCR SET UP
VCR SET UP
16:9 effect
6-sec. Date
Audio dub
Audio mode
VCR SET UP
VCR SET UP
SYSTEM
AV/headphones
AV → DV out
Beep
DISP.SET UP
SYSTEM
Brightness
Button light
SYSTEM
Button light color
Card access display
Card mix
DISP.SET UP
CARD MIX
CARD OPER.
CARD OPER.
DISP.SET UP
DISP.SET UP
DISP.SET UP
SYSTEM
Copy - card to cassette
Copy - cassette to card
Data code
*
Date/time display
Date/time select
Date/time set
DISP.SET UP
CAM.SET UP
Demo mode
Digital Zoom
* Only the date and time appear in the data code when using a memory card.
161
Download from Www.Somanuals.com. All Manuals Search And Download.
First make sure the
camera is set to...
Then select it
from this
submenu and set.
E
Function
DISP.SET UP
CARD OPER.
CARD OPER.
CARD SET UP
Displays
Erase
Erase all print mark
File numbers
Format
CARD OPER.
CAM.SET UP
Image stabilizer
Mirror mode
Mix level
DISP.SET UP
CARD MIX
CARD MIX
Mix type
VCR SET UP
CARD OPER.
CARD OPER.
CARD SET UP
VCR SET UP
SYSTEM
Output channel
Print mark
Protect
Quality
Record mode
Remote sensor mode
Shutter sound
Shutter speed
Time zone/DST
TV screen
CARD SET UP
CAM.SET UP
SYSTEM
DISP.SET UP
CAM.SET UP
VCR SET UP
White balance
Wind screen
162
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A.
®
CANON ZR50 MC/ZR45 MC DIGITAL VIDEO CAMCORDER LIMITED
WARRANTY
E
The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon ZR50 MC/
ZR45 MC Digital Video Camcorder (“DV Camcorder”) purchased and used in the United States.
Each Canon DV Camcorder, when delivered to you in new condition in its original container, is warranted against defective
material or workmanship as follows: for a period of one (1) year from the date of original purchase (three (3) months in the
case of the video head part), defective parts or DV Camcorders returned to a CUSA factory service center (“CUSA Center”) or
an authorized DV Camcorder service facility (“Service Facility”), and proven to be defective upon inspection, will be repaired
or exchanged for new or comparable rebuilt parts or DV Camcorders. The warranty period for repaired or replacement parts
or DV Camcorders shall begin upon shipment of the same, but shall in no event exceed the original warranty period of the
defective part or DV Camcorder.
Non-Canon brand peripheral equipment and software which may be distributed with Canon DV Camcorders are sold
“AS IS”, without warranty of any kind by CUSA, including any implied warranty regarding merchantability or fitness
for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer
or producer thereof.
CUSA shall have no responsibility under this limited warranty for use of Canon DV Camcorders in conjunction with
incompatible peripheral equipment and incompatible software.
In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV Camcorder
or call the CANON INFORMATION CENTER AT 1-800-828-4040 (which is open from 9:00 a.m. to 5:00 p.m. (E.S.T.),
Monday through Friday, excluding holidays). Have your unit serial number and your date of purchase available when you
make the call to expedite service. In either case you will be directerd to ship the DV Camcorder, postage prepaid, to the
CUSA Center or Service Facility nearest to you. You must include a copy of the proof of purchase (bill of sale) and a
complete explanation of the problem. DV Camcorders covered by this limited warranty will be repaired and returned to you
without charge by the CUSA Center or the Service Facility. Repairs not under warranty will be at such cost as the CUSA
Center or Service Facility may from time to time generally establish.
This limited warranty covers all defects encountered in normal use of the DV Camcorder, and does not apply in the following
cases:
(a) Loss of or damage to the DV Camcorder due to abuse, mishandling, improper packaging by you, alteration, accident,
leaking batteries, exterior nicks, scratches or dents, electrical current fluctuations, failure to follow operating instructions,
maintenance and environmental instructions prescribed in CUSA’s instruction manual, or service performed by other than
a CUSA Center or Service Facility.
(b) Use of parts or supplies (other than those sold by CUSA) which cause damage to the DV Camcorder or cause abnormally
frequent service calls or service problems.
(c) If any DV Camcorder has had its serial number or dating altered or removed.
This limited warranty does not apply to accessories or consumables for the DV Camcorder, which are sold “AS IS”, without
warranty of any kind by CUSA.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, APPLIES TO THE DV CAMCORDER AFTER THE APPLICABLE PERIOD OF
EXPRESS WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT
AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE DV
CAMCORDER SHALL BIND CUSA. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU) CUSA SHALL NOT
BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR
SERVICE, STORAGE CHARGES, LOSS OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE DV
CAMCORDER, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF
CUSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY
KIND AGAINST CUSA BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE DV CAMCORDER
SOLD BY CUSA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU
ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND
TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE DV
CAMCORDER NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CUSA. (SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF ANY DV CAMCORDER, OR THE PERSON FOR WHOM IT
WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, New York 11042
163
Download from Www.Somanuals.com. All Manuals Search And Download.
CANADA
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED
WARRANTY
The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment
purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon
digital video equipment to a Canon Service Facility when repairs are required.
E
Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective materials or
workmanship as follows:
Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year
from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase.
Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service
Facilities in Canada.
This limited warranty covers all defects except where:
(a) The loss or damage to the product results from:
i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions
contained in the instruction manual;
ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to
Canon specifications or that cause abnormally frequent service problems;
iii) repairs or services performed by any party other than a Canon Service Facility;
iv) defective batteries or any exposure to water, sand or dirt;
v) shipping (claim must be presented to the shipper);
(b) Any serial number on the video equipment is altered or removed.
(c) The digital video equipment is used for commercial, professional or industrial purposes.
This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head cleanings,
nor does it apply to digital video equipment purchased outside Canada.
TO OBTAIN WARRANTY SERVICE
Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with shipping charges
prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Canon
Service Facilities in Canada.
LIMITATIONS
Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions, guarantees or
representations, express or implied, statutory or otherwise, relative to this Canon product, including implied warranties or conditions of
merchantability or fitness for a particular purpose.
Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on account of
negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit, revenue, video tapes or
enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees or representations. Any recovery
under this limited warranty shall not exceed the purchase price of the product. Canon Canada does not assume or authorize any other
person to assume for Canon Canada any other liability with respect to this Canon product.
This warranty does not extend to any person other than the original purchaser of this Canon product or the person for whom it was
purchased as a gift and states your exclusive remedy.
NOTICE TO CONSUMER
If you plan to take important videos or if the product has not been used for some time, please check all functions with the instruction
book before using it.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
|
