®
Bush Hog TOUGH
2715Legend
Flex Wing Cutter
NEW
Bush Hog TOUGH Just Got Tougher
The Bush Hog TOUGH 2715Legend sets a new standard for flex wing cutter
performance the first day on the job and for years to come. It’s authentic
Bush Hog. With 10 Bush Hog TOUGH features.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Bush Hog TOUGH Features
1. TOUGH EZ Clean Double Deck sheds water and debris — decks
total over 1⁄4-inch thick steel and are tied directly to strong backs. They are
curved to shed water and debris and have drain holes for condensation.
2. TOUGH Between Deck Structure absorbs shock for long deck
life—3/8-inch tie bars connect hinge rails and hydraulic cylinder base
mounting lugs into one structure. Hydraulic cylinder lugs on wings are tied
into gearbox stand that extends from the side band to the hinge rail to
form one single strong structure.
1.
3.
3. TOUGH Distribution Baffles keep debris in each cutting circle to
prevent windrows. Baffles are constructed of 7-gauge steel and attached
with bolts for quick removal.
4. TOUGH Spring Steel Cushions absorb shock loads. Cushions are
strategically located at the axle where shock loads occur.
5. TOUGH Axles that can take bruising punishment. Axles are equipped
with easy-to-reach grease fittings and use strong retaining bolt through the
pivot pin.
2.
C
A
B
B
C
E
G
D
4.
F
2. TOUGH Between Deck Structure
absorbs shock for long deck life—3/8-inch tie
bars (A) connect hinge rails (B) and hydraulic
cylinder base mounting lugs (C) into one
structure; hydraulic cylinder lugs (D) on wings
are tied into gearbox stand (E) that extends
from the side band (F) to the hinge rail (G) to
form one single strong structure.
5.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mean Better Performance
Today & Tomorrow
9.
7.
6.
6. TOUGH Wing Skids that last. Skids are built of 7-gauge steel,
mounted on the outside of wings and turned up at 45 degree angle to
reduce dig in on turns.
8.
7. TOUGH Pivot Points are built to stand up to constant heavy loads.
Pivot points are easy to grease from the top, made of hardened steel,
use replaceable bushings, feature Grade 5 steel pins, use 3/8-inch
steel gussets.
10.
8. TOUGH Long-Lasting Turnbuckles make adjustments easy now
and for years to come. Turnbuckles are easy to reach for leveling
adjustments and easy to grease for long life and easy turning.
9. TOUGH Drivelines are built to last. Rugged driveline is designed
for easy maintenance. Rear and front grease fitting align so they are
easy and quick to service.
10. TOUGH Perma-Level® Hitch remains level on tractor drawbar.
Bolt retainer adds additional strength to pivot pin.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Bush Hog TOUGH
NEW2715 Flex Wing Cutter
2715 Flexwing Cutter
Cutting Width
PTO
15 ft.
540 or 1000 RPM
Perma-Level Hitch or 2-inch ball
Hitch
Minimum tractor requirement 60 HP
Side Band
1/4-inch x 12 1/2-inch
Blade Holder
Blades
Round
1/2-inch x 4-inch
6-inch
Blade Overlap
PTO Drivelines
540 PTO, ASAE Cat. 5 C.V. or Cardan/jackshaft
1000 PTO, ASAE Cat. 4, 1 3/8 or 1 3/4 CV or Cardan/jackshaft
Wing Drivelines
Wing Flex
ASAE cat 4 with slipclutch
90° up to 22° down
235 HP
Splitter Gearbox
Center And Wing Gearbox
Jack Stand
205 HP
Built into tongue
16,000 ft/min
3 1/2-inch diameter
2-inch to 14-inch
11 gauge
Blade Tip Speed
Cutting Capacity
Cutting Height
Top Deck
Bottom Deck
10 gauge
Axle Tube Pivots
Axle Arm Pivots
Wing Adjustment
Grass Baffles
Greasable bushings
Greasable
Greasable turnbuckles
Standard
Hydraulic Height Control
Safety Tow Chain
Deck Rings
Standard
Standard
Optional
Warranty
•1-year unit structure limited warranty
•6-year gearbox limited warranty
Authentic Bush Hog® Bush Hog brand rotary cutters are famous for their durability. They deliver quality performance the first day
on the job and for years into the future. All Bush Hog brand products deliver durability that means long-term performance.
Be sure you buy authentic Bush Hog. Look for the charging hog and the brand name Bush Hog.
Bush Hog®, L.L.C.
P.O. Box 1039 Selma, AL 36702-1039
(334) 874-2700
©November 2006 Bush Hog, LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
|