Breville is a registered trademark of Breville Pty. Ltd.
ABN 98 000 092 928
Breville Customer Service Centre
Australian Customers
Wizz Chopper
& Shaker
Breville Customer Service Centre
PO Box 22
Botany NSW 2019
AUSTRALIA
Instructions and Recipes
BFP50
Customer Service: 1300 139 798
Fax (02) 9384 9601
New Zealand Customers
Breville Customer Service Centre
Private Bag 94411
Greenmount
Auckland, New Zealand
Customer Service: 0800 273 845
Fax 0800 288 513
© Copyright. Breville Pty. Ltd. 2008
Due to continual improvements in design or otherwise,
the product you purchase may differ slightly from the one
illustrated in this booklet.
Model: BFP50 Issue 1/08
Download from Www.Somanuals.com. All Manuals Search And Download.
Breville recommends safety first
Breville recommends safety first continued
We at Breville are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of
care when using any electrical appliance and adhere to the following precautions:
ImPORTANT SAFeguARdS FOR YOuR BRevIlle WIZZ ChOPPeR & ShAKeR
ImPORTANT SAFeguARdS FOR All eleCTRICAl APPlIANCeS
• Carefully read all instructions before
operating and save for future reference.
• Do not process hot or boiling liquids – allow
liquids to cool before placing into the
processing bowl.
• Unwind the power cord before use.
• This appliance is for household use only. Do
not use this appliance for anything other than
its intended use. Do not use moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
• Do not let the power cord hang over the edge
of a table or counter, touch hot surfaces or
become knotted.
• Remove and safely discard any packaging
material and promotional labels before using
the Wizz Chopper & Shaker for the first time.
• Do not operate the Wizz Chopper & Shaker
continuously for more than 1 minute. Allow
the motor to rest for 10 minutes after each
1 minute of operation.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover that is fitted to the power
plug of the Wizz Chopper & Shaker.
• Do not operate the Wizz Chopper & Shaker
with a heavy load. None of the foods or
quantities suggested in this manual are
considered a heavy load.
• Do not place the Wizz Chopper & Shaker
near the edge of a bench or table during
operation. Ensure the surface is level, clean
and free of water, flour, etc.
• Do not operate the Wizz Chopper & Shaker
without food in the bowl.
• Children should be supervised to ensure that
they do not play with the appliance.
• Do not place the Wizz Chopper & Shaker on
or near a hot gas or electric burner, or where
it could touch a heated oven.
• Always ensure the chopping blade has
stopped rotating and the Wizz Chopper &
Shaker is switched off at the power outlet
and the power cord is unplugged from the
power outlet before removing the motor body
and processing lid.
• It is recommended to regularly inspect
the appliance. Do not use the appliance if
power supply cord, power plug or appliance
becomes damaged in any way. Return the
entire appliance to the nearest authorised
Breville service centre for examination
and/or repair.
• Do not use the Wizz Chopper & Shaker on a
sink drain board.
• Handle the Wizz Chopper & Shaker with
care – remember the chopping blade is very
sharp and should be kept out of reach of
children.
• Always ensure the Wizz Chopper & Shaker
is switched off at the power outlet and the
power cord is unplugged from the power
outlet before attempting to move the
appliance, when not in use, if left
unattended and before disassembling,
cleaning or storing.
• Any maintenance, other than cleaning,
should be performed at an authorised
Breville Service Centre.
• Always make sure the Wizz Chopper &
Shaker is completely assembled before
operating. Always operate the Wizz Chopper
& Shaker with the processing lid in position.
The appliance will not operate unless
properly assembled.
• To protect against electric shock do not
immerse the motor body, power cord or
power plug in water or any other liquid.
• Ensure the Wizz Chopper & Shaker is
switched off at the power outlet and the
power cord is unplugged from the power
outlet before inserting the chopping blade,
processing lid or motor body.
• Do not move the Wizz Chopper & Shaker
during operation.
• Do not leave the Wizz Chopper & Shaker
unattended when in use.
• Do not use attachments other than those
provided with the Wizz Chopper & Shaker.
• Keep the appliance clean. Follow the
cleaning instructions provided in this book
(page 11).
• Do not attempt to operate the Wizz Chopper
& Shaker by any method other than those
described in this booklet.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your Breville Wizz Chopper & Shaker
Operating your Breville Wizz Chopper & Shaker
4.Ensure the power is switched off at
Before first use
the power outlet and the power plug is
Before using your Breville Wizz Chopper
unplugged from the power outlet. Place the
& Shaker, remove and safely discard all
Operate button
press to operate
motor body on top of the processing lid so it
packaging materials and promotional labels,
fits snugly into place and sits flush against
being careful when handling the chopping
the rim of the processing bowl.
blade, as it is very sharp. Wash the processing
bowl, processing lid and chopping blades in
warm, soapy water. Dry thoroughly.
Operation of your Wizz Chopper &
Shaker
1.Place the processing bowl on a dry, level
surface. Insert the chopping blade onto the
centering shaft in the processing bowl.
Motor body
motor sits on top of the
processing bowl and
processing lid for easy and
efficient processing
5.Insert the power plug into a 230/240V power
outlet and switch on at the power outlet.
6.Press the operate button with the palm of
your hand to process the ingredients. Refer
to page 10 for approximate processing
times.
Processing lid
covers the processing bowl
and supports the motor
body
200ml processing bowl
2.Add food to be processed into the bowl. For
types of food and quantities refer to page 10.
for use with the chopping blade
3.Insert the processing lid into the processing
bowl. Align the grooves on the processing lid
with those on the processing bowl and slide
to ‘click’ into place. The top of the chopping
blade spindle should be centered through the
hole of the processing lid.
Chopping blade
made of durable stainless steel
to processes small quantities
of herbs, nuts, cheese,
breadcrumbs, garlic, etc
Shaker attachment
with coarse and fine holes.
Use to sprinkle ingredients
onto prepared food straight
from the processing bowl
The Wizz Chopper & Shaker will not operate
unless the processing lid and motor body
are correctly assembled.
Note
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your Breville Wizz Chopper & Shaker
Operating your Breville Wizz Chopper & Shaker
7.If desired, use the shaker attachment
handy hints for best results
• Do not overload the appliance by putting in
Recommended foods, quantities and times
to sprinkle processed food. The shaker
attachment can be assembled by removing
Type of Food
Garlic
Preparation
max. amount Approximate Time
at one time
too much food (Refer to table on page 10 for
the motor body, processing lid and chopping
quantities). Do not exceed ‘MAX’ marking on
blade from the processing bowl. Insert the
processing bowl.
shaker attachment onto the processing bowl.
Peel
10 cloves
50g
15-20 seconds
15-20 seconds
15-20 seconds
20-30 seconds
15-20 seconds
20 seconds
• Chop larger quantities in batches; do not
exceed recommended maximum quantities.
Fresh chilli
Dried chilli
Fresh herbs
Dried herbs
Nuts
Trim, remove seeds if desired.
Cut into 2cm pieces
• Do not operate continuously for more than
one minute.
Whole
15g
• Always remove chopping blade before
pouring or shaking out food.
Wash and dry well. Remove
stalks/stems if necessary
15g
• To ensure even chopping results, cut food
into pieces of similar size, up to 2cm square.
Remove stalks/stems if
necessary
20g
• When chopping herbs, ensure they are as
dry as possible.
Shells removed
75g
• To avoid damage to the chopping blade, do
not process hard items such as frozen foods,
ice, cereals and rice.
Breadcrumbs
Cut into 2cm cubes
Cut into 2cm cubes
50g
20 seconds
• Do not process chocolate.
Hard cheese
(Parmesan, Romano)
75g
20-30 seconds
• Do not process soft or semi-hard cheeses.
Only process hard cheeses such as
Parmesan or Romano.
• Do not process thin liquids such as water or
milk.
• Do not process raw or cooked meats.
• Chopped ingredients such as fresh/dried
herbs, garlic, breadcrumbs, nuts or cheese
are ideal to use with the shaker attachment
to garnish meals.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Care, Cleaning & Storage
Troubleshooting
Food stains and odours
Cleaning
Troubleshooting table
Food such as spices may leave a stain on
plastic parts whilst other foods such as garlic
will leave a strong odour. To remove either,
soak the parts for 5 minutes in 1 litre water
with ¼ cup lemon juice.
motor base
PROBlem
SOluTION
Always ensure the Wizz Chopper & Shaker is
switched off at the power outlet and the power
cord is unplugged from the power outlet before
cleaning.
motor doesn’t start or chopping blade
doesn’t rotate
Check that the processing bowl, processing lid,
and motor body are assembled correctly and
securely in place. Check that the power plug
is securely inserted into the power outlet and
switched ‘ON’.
Storage
Wipe the motor body with a clean damp cloth
after each use.
Before storing, thoroughly wash and dry all
parts.
Food is unevenly chopped
Either too much food is being chopped at one
time or the pieces are not small enough. Try
cutting food into smaller pieces of even size and
processing a smaller amount per batch. For best
results the food should be chopped into pieces no
larger than 2cm.
Other parts
Always ensure the Wizz Chopper & Shaker is
switched off at the power outlet and the power
cord is unplugged from the power outlet before
storing.
Wash the processing bowl, processing lid,
shaker attachment and chopping blade
in warm to hot soapy water using a mild
detergent. Rinse and dry thoroughly.
Store the Wizz Chopper & Shaker assembled,
with the chopping blade inserted in the bowl,
on the kitchen bench or in an easy to access
cupboard. Store the Wizz Chopper & Shaker
out of reach of children. Store the appliance
upright. Do not store anything on top of the
appliance.
The processing bowl, processing lid, chopping
blade and shaker attachment may also be
washed in the dishwasher (top shelf only).
Food is chopped too fine
The food is over processed. Next time use brief
pulses or process for a shorter time.
Do not use steel wool, scouring pads or
abrasive cleaners, as these will scratch the
surfaces.
Food collects under the processing lid or Processing too much food. Turn the Wizz Chopper
around sides of processing bowl
& Shaker off at the power outlet. When the
chopping blade stops rotating, remove the motor
body and processing lid. Clean the processing
bowl and processing lid with a spatula. Reduce
quantity of food to be processed.
The chopping blade is very sharp, use
extreme care when storing.
The chopping blade is very sharp so handle
with care at all times. Use extreme care
when washing. To avoid accidental cuts
do not leave the chopping blade to soak in
sudsy water.
Note
Food sticks to chopping blade
Processing too much food. Turn the Wizz Chopper
& Shaker off at the power outlet. When the
chopping blade stops rotating, remove the motor
body and processing lid. Carefully remove the
blade. Remove the food from the chopping blade
with a spatula. Reduce quantity of food and
continue processing.
Note
CAUTION: NEVER IMMERSE THE MOTOR BODY, POWER CORD OR POWER PLUG IN
WATER OR ANY OTHER LIQUID. DO NOT PLACE THE MOTOR BODY IN THE DISHWASHER.
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
|