HOrIZOn MCS 100
5.1 surround speaker system
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Satellites
Center Channel
Subwoofer
Frequency Response:
1ꢀ0Hz – ꢀ0kHz
1ꢀ0Hz – ꢀ0kHz
40 - 180Hz
Recommended Amplifier
Power Range:
10 – 100 watts
88dB [ꢀ.8v at 1m]
8 ohms
10 – 100 watts
88dB [ꢀ.8v at 1m]
8 ohms
—
Sensitivity:
—
Nominal Impedance:
Crossover Frequency:
Amplifier Output:
Woofer:
—
ꢁ,000Hz
—
ꢁ,000Hz
—
—
100 watts RMS
—
—
8”
Midrange:
ꢁ”with Phase Plugs
& MagnaGuard®
ꢁ”with Phase Plugs
& MagnaGuard
—
ꢁ
ꢁ
Tweeter:
⁄4”(ꢀ5mm) Kortec®
⁄4”(ꢀ5mm) Kortec
—
Dimensions (H x W x D)
7ꢁ⁄8 x 4ꢁ⁄8 x 411⁄16”
(189 x 11ꢁ x 9ꢁmm)
511⁄16 x 1ꢀ5⁄8 x ꢁꢁ⁄4
”
1ꢀꢁ⁄4 x 15ꢁ⁄8 x 15ꢁ⁄8
”
(ꢁꢀ4 x ꢁ90 x ꢁ90mm)
(145 x ꢁꢀ1 x 95mm)
Weight
ꢀ.5 lbs
(1.14kg)
4.6 lbs
(ꢀ.1kg)
ꢀꢀ.7 lbs
(10.ꢁkg)
MCS 100 Introduction
Thank you for purchasing a Boston Acoustics Multi-Channel Solution Speaker System. These speakers incorporate high-quality
components that produce the famous Boston sound. The system is ideally suited for use as a 5.1 channel solution in a high-
quality home theater or music system. The system is complete with everything you need for the typical speaker system
including speaker wire, satellite speakers, a center channel speaker, and a subwoofer. Please check out Bostonacoustics.
com\placement for information on placing your speakers.
The MCS 100 speaker system delivers exceptionally articulate on-screen dialog, music, effects, and room filling bass from a
small, sleek package. Compact driver placement and quality, system specific crossovers assure a wide uniform dispersion
for complete coverage of a listening room. All speakers also feature MagnaGuard® magnetic shielding which ensures the
speaker’s magnetic field does not interfere with the televisions picture.
Unpacking the System
Carefully unpack the system. If there is any sign of damage from transit, report it immediately to your dealer and/or delivery
service. Keep the shipping carton and packing materials for future use. Open the package and verify the following contents:
(4) Satellite speakers
(1) Center Channel speaker
(1) Subwoofer
(2) 40’(12m) speaker wires
(4) Satellite speakers
(3) 15’(4.6m) speaker wires
with 1 removable foot
Subwoofer
(1) 15’(4.6m) subwoofer cable
(8) Rubber bumpers (used for wall mounting)
(1) Center Channel speaker
with 2 removable feet
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Placement Options
The MCS 100 satellites and center channel are easily placed on a tabletop or wall-mounted. The
speakers are configured for tabletop use when you first unpack the system. The foot installed on
the rear of the speaker will keep it upright.
The MCS 100 satellites and center channel are designed to easily mount on the wall using the
keyhole slot(s) on the back of the speaker. When mounting the speakers to the wall use the supplied
rubber bumpers. You must remove the attached foot to wall-mount your speakers. Remove the
thumbscrew from the back of the foot. It is slotted for easy removal with a screwdriver or a coin.
The keyhole mounting option is similar to hanging a picture frame on a wall. Install a #8 screw (not
included) into the sheetrock, making sure to go into a stud, and hang the speaker onto the screw head.
If a stud is not available, a sheetrock anchor should be used to support the weight of the speaker. It is
advisable to connect the speaker wire prior to wall-mounting.
NOTE: Because there are so many different kinds of surfaces on which the speakers could be mounted. There is no one
type of fastener that we could supply that would work in all the possible situations. So taking into account the surface the
speaker is being mounted on, acquire the appropriate type of fasteners. If you’re not sure what type of fastener to use, take
the mounting bracket to a friendly hardware store, tell them about the wall you’re mounting the speaker on, and ask them
to recommend an appropriate fastener. Keep in mind the weight of the speaker.
Speaker Connections
After your speakers are properly placed, you are ready
to wire your system. First, turn off all system power.
Use the speaker wire included with the system to
make your connections. For longer distances, #16 or
#18 gauge wire available from your dealer should be
used. Please see the illustration for guidance con-
necting the wires to the MCS 100 satellites and center
channel.
12V
TRIGGER OUT
For connection to your receiver please refer to its
owner’s manual.
Important!
+
–
To ensure the best performance observe polarities when making speaker con-
nections, as shown in the illustration. Connect each + terminal on the back of the
amplifier or receiver to the respective + (red) terminal on each speaker. Connect the
– (black) terminals in the same way. If the connections are not made correctly it can
cause poor bass response and imaging. Also, to avoid short circuits that may damage
your equipment be careful not to let any of the bare wires touch each other.
+
–
+ Red – Black
Subwoofer Connections
Turn off all power. Use the subwoofer cable included with your
system to connect the subwoofer to your receivers Subwoofer or
LFE Output. Connect the other end to the“Line In”on the back of
the Subwoofer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Subwoofer Controls
Power On
Plug the subwoofer’s AC cord into a wall outlet. We do not recommend using use the
outlets on the back of the receiver. The subwoofer features auto on/standby. An LED
indicator next to the volume control indicates what mode the subwoofer is in.
RED = STANDBY (No signal detected, Amp Off)
GREEN = ON (Signal detected, Amp On)
LED indicator
The subwoofer will automatically enter the Standby mode after several minutes when no signal is detected from your system.
The subwoofer will then power ON instantly when a signal is detected.
Volume Control
Begin by adjusting the Subwoofer Volume Control to the 11 o’clock position. Further adjust the Subwoofer Volume Control
until you hear a match in volume between the main speakers and subwoofer. Ideally, bass response should not overpower
the room but rather be adjusted so there is a natural blend across the entire musical range.
Operation
When using the MCS 100 in a Dolby® Digital or DTS™ home theater system, make sure all speakers are set to“Small”. When
using the system in a Dolby Pro Logic® home theater system, make sure the receiver’s center channel mode is set to“Normal.”
Some Dolby Digital equipped receivers/processors offer different setup options for each source or surround mode (e.g., CD-
stereo, videotape, Dolby Digital, Pro Logic®). In each case, follow your equipment’s instructions to ensure that the subwoofer
output is turned on and that the speakers are set to“Small”in each mode.
If your receiver has adjustable crossover settings, we recommend the subwoofer crossover be set at 150Hz.
Refer to the owner’s manual for your AV receiver for any additional recommendations on system operation.
Maintenance and Service
The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust. All wiring
connections should be inspected and cleaned or remade at least once a year.
If a problem does occur, make sure that all connections are properly made, secure and clean. If a problem occurs in one loud-
speaker, rewire that speaker in a different location within the system. Should the problem persist in this speaker the problem
is within the speaker. If the speaker sounds fine in the new position it is a strong indication of a more in depth issue with the
electronics in the system. In the event that your MCS 100 ever needs service, contact your local Boston Acoustics dealer or
If your subwoofer does not play, check that all the connectors on the cables are making proper contact and that the AC plug
is connected to a“live”receptacle.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Boston Acoustics warrants to the original purchaser of our MCS 100 system that it will be free of defects in materials and
workmanship in its mechanical parts for a period of 5 years from the date of purchase. The warranty period for the electrical
components of MCS 100 is 1 year.
Your responsibilities are to install and use them according to the instructions supplied, to provide safe and secure transporta-
tion to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip
when requesting service.
Excluded from this warranty is damage that results from abuse, misuse, improper installation, accidents, shipping, or repairs/
modifications by anyone other than an authorized Boston Acoustics service representative.
This warranty is limited to the Boston Acoustics product and does not cover damage to any associated equipment. This
warranty does not cover the cost of removal or reinstallation. This warranty is void if the serial number has been removed or
defaced. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If Service Seems Necessary
First, contact the dealer from whom you purchased the product. If that is not possible, write to:
Boston Acoustics, Inc.
ꢁ00 Jubilee Drive
Peabody, MA 01960 USA
Or contact us via e-mail at:
We will promptly advise you of what action to take. If it is necessary to return your MCS 100 to the factory, please ship it pre-
paid. After it has been repaired, we will return it freight prepaid in the United States and Canada.
For EU Customers Only
This symbol found on the product indicates that the product must not be disposed of with household waste.
Instead, it may be placed in a separate collection facility for electronic waste or returned to a retailer when pur-
chasing similar product. The producer paid to recycle this product. Doing this contributes to reuse and recycling,
minimizes adverse effects on the environment and human health and avoids any fines for incorrect disposal.
Boston Acoustics continually strives to update and improve its products. The specifications and construction details are
subject to change without notice.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ00 Jubilee Drive, Peabody, MA 01960 USA
www.bostonacoustics.com
Boston, Boston Acoustics, MagnaGuard, Kortec, and the Boston Acoustics logo are registered trademarks of Boston Acoustics,
Inc. Dolby Digital, and Dolby Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademarks of DTS,
Inc. Specifications are subject to change without notice. © 2007 Boston Acoustics, Inc. 142-002699-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|