Integrated IR Bullet Camera
WZ18
en Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Table of Contents | en
3
Table of Contents
1
Safety
5
5
6
7
14
1.1
1.2
1.3
1.4
Important safety instructions
Important safety instructions
Important notices
Customer Support and Service
2
3
4
Features
16
17
18
Box Contents
Camera Parts and Adjustments
5
5.1
5.2
Installation
Mounting Position
Monitor Connection
19
19
20
6
7
Dimensions
21
22
Specifications
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
4
en | Table of Contents
Integrated IR Bullet Camera
8
8.1
8.2
OSD Manual
Lens Menu
23
23
23
24
24
24
25
25
25
26
26
26
27
27
28
28
29
30
Exposure Menu
White Balance Menu
Day & Night Menu
Image Menu
3DNR Balance Menu
Special Menu
Reset Menu
OSD Function Description
Lens
8.3
8.4
8.5
8.6
8.7
8.8
8.9
8.9.1
8.9.2
8.9.3
8.9.4
8.9.5
8.9.6
8.9.7
8.9.8
Exposure
White Balance
Day and Night
Image
3DNR
Special
Reset
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
5
1
Safety
1.1 Important safety instructions
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELL.
WARNING!
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
CAUTION!
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.
CAUTION!
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
In USA and Canada, use a Class 2 power supply only.
NOTICE!
After adjusting zoom and focus, to prevent water infiltration,
firmly tighten the zoom and focus lever. (Rep: 10) When you
install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity
problems. (Rep: 11)
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
6
en | Safety
Integrated IR Bullet Camera
1.2 Important Safety Instructions
1.
2.
3.
4.
5.
Read these instructions.
Keep this instruction.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
6.
7.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with manufacturer instructions.
8.
9.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
power where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
7
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in a
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
1.3 Important Safety Instructions
CAUTION!
1.
A regulated DC12V 1A power supply is recommended for
use with this camera for the best picture and the most
stable operation. An unregulated power supply can cause
damage to the camera. When unregulated power supply is
applied, product warranty will be out of subject.
It is recommended that the camera is used with a monitor
that has a CCTV quality 75 Ohm video impedance level. If
your monitor is switched to high impedance then please
adjust accordingly.
2.
3.
4.
Do not attempt to disassemble the camera to gain access
to the internal compounds. Refer servicing to your dealer.
Never face the camera towards the sun or any bright or
reflective light, which may cause smear on the picture and
possible damage to the CCD.
5.
Do not remove the serial sticker for the warranty service.
All-pole power switch - Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole, into the
electrical installation of the building. If it is needed to open the
housing for servicing and/or other activities, use this all-pole
switch as the main disconnect device for switching off the
voltage to the unit.
Camera grounding - For mounting the camera in potentially
damp environments, ensure to ground the system using the
ground connection of the power supply connector (see section:
Connecting external power supply).
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
8
en | Safety
Integrated IR Bullet Camera
Camera lens - An assembled camera lens in the outdoor
housing must comply and be tested in accordance with UL/
IEC60065. Any output or signal lines from the camera must be
SELV or Limited Power Source. For safety reasons the
environmental specification of the camera lens assembly must
be within the environmental specification of -10 °C (14 °F) to
50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if
the camera signal is beyond 140 feet, in accordance with
NEC800 (CEC Section 60).
Coax grounding:
– Ground the cable system if connecting an outside cable
system to the unit.
– Connect outdoor equipment to the unit’s inputs only after
this unit has had its grounding plug connected to a
grounded outlet or its ground terminal is properly
connected to a ground source.
– Disconnect the unit’s input connectors from outdoor
equipment before disconnecting the grounding plug or
grounding terminal.
– Follow proper safety precautions such as grounding for
any outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code,
ANSI/NFPA No.70, provides information regarding proper
grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors,
location of discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that electronic
and electrical appliances, which have reached the end of their
working life, must be collected and disposed of separately from
household waste material. Separate collecting systems are
usually in place for disused electronic and electrical products.
Please dispose of these units at an environmentally compatible
recycling facility, per European Directive 2002/96/EC.
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
9
Electronic Surveillance - This device is intended for use in
public areas only. U.S. federal law strictly prohibits
surreptitious recording of oral communications.
Environmental statement - Bosch has a strong commitment
towards the environment. This unit has been designed to
respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET
handling precautions to avoid electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper
ESD safety precautions when handling the electrostaticsensitive
printed circuit boards.
Fuse rating - For security protection of the device, the branch
circuit protection must be secured with a maximum fuse rating
of 16A. This must be in accordance with NEC800 (CEC Section
60).
Moving - Disconnect the power before moving the unit. Move
the unit with care. Excessive force or shock may damage the
unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially
regarding clearance from power and lightning conductors and
transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily
accessible disconnect device in the building installation wiring.
Pluggable equipment - Install the socket outlet near the
equipment so it is easily accessible.
Power resupply - If the unit is forced to power down due to
exceeding the specified operating temperatures, disconnect
the power cord, wait for at least 30 seconds, and then
reconnect the power cord.
Power lines - Do not locate the camera near overhead power
lines, power circuits, or electrical lights, nor where it may
contact such power lines, circuits, or lights.
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.comInst.alAlatilolnMMaanunaluals Search And Download.
10
en | Safety
Integrated IR Bullet Camera
Rack-mount
– Ventilation - Do not place this unit in a built-in installation
or rack without proper ventilation or adhering to the
manufacturer’s instructions. The equipment must not
exceed its maximum operating temperature requirements.
– Mechanical loading - Properly mount the equipment in a
rack to prevent a hazardous condition due to uneven
mechanical loading.
SELV
All the input/output ports are Safety Extra Low Voltage (SELV)
circuits. SELV circuits should only be connected to other SELV
circuits.
Because the ISDN circuits are treated like telephone-network
voltage, avoid connecting the SELV circuit to the Telephone
Network Voltage (TNV) circuits.
The system ground is only used to comply with safety standards
or installation practices in certain countries. Bosch does not
recommend connecting system ground to safety ground unless
it is explicitly required. However, if the system ground and
safety ground are connected and grounding loops are causing
interference in the video signal, use an isolation transformer
(available separately from Bosch).
CAUTION!
Connecting System ground to Safety ground may result in
ground loops that can disrupt the CCTV system.
Video loss - Video loss is inherent to digital video recording;
therefore, Bosch Security Systems cannot be held liable for any
damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security
Systems recommends multiple, redundant recording systems,
and a procedure to back up all analog and digital information.
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
11
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user’s authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
12
en | Safety
Integrated IR Bullet Camera
INFORMATIONS FCC ET ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Suite à différents tests, cet appareil s’est révélé conforme aux
exigences imposées aux appareils numériques de classe A, en
vertu de la section 15 du règlement de la Commission fédérale
des communications des États-Unis (FCC), et en vertu de la
norme ICES-003 d’Industrie Canada. Ces exigences visent à
fournir une protection raisonnable contre les interférences
nuisibles lorsque l’appareil est utilisé dans le cadre d’une
environnement commercial. Cet appareil génère, utilise et émet
de l’énergie de radiofréquences et peut, en cas d’installation ou
d’utilisation non conforme aux instructions, engendrer des
interférences nuisibles au niveau des radiocommunications.
Toutefois, rien ne garantit l’absence d’interférences dans une
installation particulière. Il est possible de déterminer la
production d’interférences en mettant l’appareil
successivement hors et sous tension, tout en contrôlant la
réception radio ou télévision. L’utilisateur peut parvenir à
éliminer les interférences éventuelles en prenant une ou
plusieurs des mesures suivantes:
–
Modifier l’orientation ou l’emplacement de l’antenne
réceptrice;
–
–
Éloigner l’appareil du récepteur;
Brancher l’appareil sur une prise située sur un circuit
différent de celui du récepteur;
–
Consulter le revendeur ou un technicien qualifié en radio/
télévision pour obtenir de l’aide.
Toute modification apportée au produit, non expressément
approuvée par la partie responsable de l’appareil, est
strictement interdite. Une telle modification est susceptible
d’entraîner la révocation du droit d’utilisation de l’appareil.
La brochure suivante, publiée par la Commission fédérale des
communications (FCC), peut s’avérer utile : How to Identify and
Resolve Radio-TV Interference Problems (Comment identifier et
résoudre les problèmes d’interférences de radio et de télévision).
Cette brochure est disponible auprès du U.S. Government
Printing Office, Washington, DC 20402, États-Unis, sous la
référence n° 004-000-00345-4.
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
13
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL’s Standard(s) for Safety for Audio,
Video and Similar Electronic Apparatus. Safety Requirements UL
60065. UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and must be
treated accordingly.
NOTE!
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user
guide and the product described.
More information
For additional information, please contact the Bosch Security
Systems location nearest you or visit our web site at
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
14
en | Safety
Integrated IR Bullet Camera
1.4 Customer Support and Service
If this unit needs service, contact the nearest Bosch Security
Systems Service Center for authorization to return and shipping
instructions.
Service Centers
USA
Repair Center-
Telephone: 800-566-2283
Fax: 800-366-1329
E-mail: [email protected]
Customer Service
Telephone: 888-289-0096
Fax: 585-223-9180
E-mail: [email protected]
Technical Support
Telephone: 800-326-1450
Fax: 585-223-3508 or 717-735-6560
E-mail: [email protected]
Canada
Telephone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East, Africa Region
Repair Center
Telephone: 31 (0) 76-5721500
Fax: 31 (0) 76-5721413
E-mail: [email protected]
Asia Region
Repair Center
Telephone: 65 63522776
Fax: 65 63521776
E-mail: [email protected]
Customer Service
Telephone: 86 (0) 756 7633117 or
86 (0) 756 7633121
Fax: 86 (0) 756 7631710
E-mail: [email protected]
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Safety | en
15
Warranty and more information
For additional information and warranty queries, please contact
your Bosch Security Systems representative or visit our website
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
16
en | Features
Integrated IR Bullet Camera
2
Features
Excellent image quality under all conditions
– High resolution 540 TVL image
– Dual window design, eliminating IR glare
– Suitable for indoor and outdoor use (IP66 rated)
Designed for day and night vision
– 1/3-in. Super-HAD CCD II sensor
– 20 IR LED’s providing 20 meters of vision in complete
darkness and with adjustable output power
– Day/Night function, automatically switching between day
(color) mode and night (black/white with IR) modes
Advanced digital video processing
– 10-bit image processing
– Digital Noise Reduction (DNR) for optimum night time
images
– Privacy mask function allows blanking of specific areas of
the scene
– Multi language On-screen Display (OSD) control, allowing
camera configuration on the monitor screen
Easy to install
– Mounting bracket included with cable feed-through
– External focus and zoom control (no need to dismantle the
camera)
– Universal 12 VDC or 24 VAC power input
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Box Contents | en
17
3
Box Contents
WZ18 Bullet Camera
Sunshield
Video Output Test Cable
L-Wrench
Screws (3)
Sunshield Fixing Bolt
Operation Manual
(this book)
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
18
en | Camera Parts and Adjustments
Integrated IR Bullet Camera
4
Camera Parts and Adjustments
❶
❷
❶
❸
❹
❺
❽
❻
❼
1
2
3
4
Sunshield Fixing Bolt
Sunshield
5
Photo cell
Body
Body Fixing Ring
External Zoom and Focus Adjustment
6
7
8
Mounting Bracket
LEDs (20)
External Zoom and Focus Controls
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Installation | en
19
5
Installation
5.1 Mounting Position
WARNING!
To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
360˚
90˚
360˚
CAUTION!
After adjusting the zoom and focus, firmly tighten the zoom and
focus lever to seal the camera against water ingress.
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
20
en | Installation
Integrated IR Bullet Camera
5.2 Mounting Connection
CAUTION!
To prevent humidity problems, the camera must be installed in
dry conditions, and the cable leads should be sealed once
connected.
1
2
3
4
5
DC 12V / AC 24V
BNC Female
DC 12V / AC 24V Power Supply
Video In
TV Monitor
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
Dimensions | en
21
6
Dimensions
82
130
120
224
M12 XP1.0
mm
(in.)
Ф65
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.comInst.alAlatilolnMMaanunaluals Search And Download.
22
en | Specifications
Integrated IR Bullet Camera
7
Specifications
NTSC
PAL
Image Sensor
Total Pixels (H x V)
Effective Pixels (H x V)
Inter. H/V (H, V)
Horizontal Resolution
S/N Ration
1/3 in. Super HAD CCD II
811 x 508
768 x 494
795 x 596
752 x 582
15.734 KHz, 59.94 Hz
15.625 KHz, 50 Hz
540 TV Lines
> 50 dB (AGC Off)
Internal
Sync. System
Gamma
r=0.05 ~ 1.0 Adjustable / USER
1.0 Vp-p Composite (75 Ohm)
Varifocal
Video Output
Lens
Electronic Shutter
Manual Shutter
1/60 sec.
1/50 sec.
1/60(50), FLK, 1/250, 1/500, 1/2K, 1/5K, 1/10K,
1/100K X2, X4, X8, X16, X32, X64, X128, X256
Sense-up
AGC
Off / Auto (X2, X4, X8, X16, X32, X64, X128, X256)
Off / Low / Middle / High
BLC
Off / BLC / HSBLC
White Balance
Day and NIght
Motion Detection
Privacy Zone
3-DNR
ATW / PUSH / PUSH-LOCK / MANUAL / INDOOR / OUTDOOR
True Day and Night With ICR Mechanism
Zone 4ea (Mask On / Off)
Zone 8ea (Mask On / Off)
Off / On (0~100 Level Adjustable)
Off / Indoor / Outdoor
D-WDR
Image
Freeze / Mirror / D-zoom / Sharpness / Color gain /
Gamma / NEG.Image
IR LED
850 nm, 20 each, Up to 30 m (98.4 ft)
Adjustable(4 step)
IR LED Operation
IP Rating
IP66 (Waterproof)
Operating Temperature
Storage Temperature
Power Consumption
Weight
-10˚C ~ +50˚C (14˚F~122˚F)
-20˚C ~ +60˚C (-4˚F~140˚F)
AC24V ±10% Max 6.7W, DC12V ±10% Max 570mA
Approx. 1000g (2.2 lbs)
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
OSD Manual | en
23
8
OSD Manual
8.1 Lens Menu
→
→
→
LENS
DC
BRIGHTNESS
1~100
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR
↕
SPECIAL
↕
RESET
↕
EXIT
8.2 Exposure Menu
LENS
SHUTTER
→
→
→
X256 ~1/100K
↕
EXPOSURE
→
AGC
LOW, MIDDLE, HIGH
X2 ~ X256
↕
WHITE BAL
↕
SENSE-UP
GAIN, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGNT
DAY NIGHT
BLC
→
BLC
↕
→
→
↕
IMAGE
↕
↕
HSBLC
LEVEL, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGNT
3DNR
↕
D-WDR
→
INDOOR, OUTDOOR
SPECIAL
↕
RESET
↕
EXIT
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
24
en | OSD Manual
Integrated IR Bullet Camera
8.3
White Balance Menu
LENS
↕
EXPOSURE
↕
WHITE BAL
→
ATW
↕
↕
PUSH
↕
DAY NIGHT
↕
IMAGE
↕
P-LOCK
↕
3DNR
↕
MANUAL
↕
→
BLUE 1~ 100
↕
SPECIAL
↕
INDOOR
↕
RED 1~ 100
RESET
↕
OUTDOOR
EXIT
8.4
Day & Night Menu
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
→
AUTO
↕
→
→
D&N LEVEL
BURST
→
→
0~ 3
↕
IMAGE
↕
B/W
↕
ON / OFF
3DNR
↕
COLOR
SPECIAL
↕
RESET
↕
EXIT
8.5
Image Menu
LENS
↕
FREEZE
↕
→
→
→
→
→
→
→
ON/OFF
EXPOSURE
↕
MIRROR
↕
MIRROR
x1 ~ x32
0 ~ 31
↔
↔
V-FLIP
↔
↔
ROATE
WHITE BAL
D-ZOOM
↕
PAN -100~100
TILT -100~100
↕
DAY NIGHT
↕
SHARPNESS
↕
COLOR GAIN
↕
IMAGE
↕
→
BLUE 1 ~100
0.05~1
↔
RED 1 ~100
3DNR
↕
GAMMA
↕
SPECIAL
↕
NEG.IMAGE
ON/OFF
RESET
↕
EXIT
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
OSD Manual | en
25
8.6
8.7
8.8
3DNR Balance Menu
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR
↕
→
ON
→
LEVEL
→
1 ~ 100
SPECIAL
↕
RESET
↕
EXIT
Special Menu
CAM TITLE
↕
→
→
ON/OFF
↔
↔
POSITION CONTROL
LENS
↕
EXPOSURE
↕
LANGUAGE
ENGLISH
FRENCH
↔
RUSSIAN
↔
↔
GRRMAN
↔
DEUTSCH
↔
DUTCH
WHITE BAL
↕
LEFT /
RIGHT
MOTION
ON/OFF
↔
AREA SEL
↔
AREA DISPLAY
↔
↔
WIDTH
↔
↔
TOP / BOTTOM
HEIGHT
DAY NIGHT
↕
SENSITIVITY
IMAGE
MOTION
VIEW
↕
AREA 1~4
ON/OFF
3DNR
↕
PRIVACY
↕
→
→
AREA SEL
↓
SPECIAL
↕
→
→
AREADISPLAY
↔
LEFT/RIGHT
↔
WIDTH
COLOR
↔
↔
TOP/BOTTOM
↕
↓
AREA 1~8
ON/OFF
HEIGHT
RESET
↕
SYNC
INT
EXIT
Reset Menu
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR
↕
SPECIAL
↕
RESET
↕
→
FACTORY RESET
EXIT
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
26
en | OSD Manual
Integrated IR Bullet Camera
8.9
OSD Function Description
8.9.1
Lens
– BRIGHTNESS: Adjusts the image brightness (1~100).
LENS
BRIGHTNESS
RETURN
60
RET┛
8.9.1 Exposure
EXPOSURE
SHUTTER
AGC
SENSE-UP
BLC
1/60
MIDDLE
OFF
OFF
D-WDR
RETURN
OFF
RET┛
– SHUTTER
– FLK: Adjusts FLICKERLESS setting.
(NTSC: 1/100, PAL: 1/120)
– FIXED: Adjusts the Shutter Speed.
> 1/60(50), 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K.
* ( ) is for PAL TYPE.
– BRIGHTNESS: Adjusts the MANUAL Electronic Shutter
value.
– AGC: Adjusts the Automatic Gain Control.
– SENSE-UP: Low-speed shutter control.
– BLC: Back Light Compensation.
– HSBLC: Highlight Suppression BLC (darkens parts of
the image to enhance the scene).
– D-WDR: Dynamic-wide Dynamic Range allows every detail
to be captured accurately even if one portion is bright
while other portions are dark.
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
OSD Manual | en
27
8.9.3
White Balance
Adjust to display accurate white color by controlling the RGB
level.
WHITE BAL MANUAL
BLUE
RED
24
32
RETURN
RET┛
– ATW: Traces the White Balance automatically.
(2,500K ~ 9,500K)
– PUSH: Traces the White Balance automatically.
– P-LOCK: Automatically readjusted at the request of the user.
– MANUAL: Sets the RED GAIN or BLUE GAIN.
– INDOOR: Sets base mode to 3,200K.
– OUTDOOR: Sets base mode to 5,400K.
8.9.4 Day and Night
Determines the switching moment between Color and B/W
mode.
DAY & NIGHT AUTO
D&N LEVEL
RETURN
---l----- 1
RET┛
– AUTO: Sensor mode auto change.
* Adjustable for variable D&N change timing.
– D&N Level “1”: Turn LED on with B/W mode @ 4Lux /
Turn LED Off with Color Mode @ 7Lux
– The Higher D&N Level turns into Black & White mode
at higher luminous intensity and vice versa.
* The D&N change timing could be affected by installation circumstances.
– B/W: Fixes the output image in B/W.
• BURST ON/OFF: Select the burst signal ON/OFF when
Night condition.
– COLOR: Fixes the output image in COLOR.
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
28
en | OSD Manual
Integrated IR Bullet Camera
8.9.5
Image
Sets the FREEZE, MIRROR, D-ZOOM, SHARPNESS, COLOR
GAIN, GAMMA, NEGATIVE IMAGE.
IMAGE
FREEZE
MIRROR
D-ZOOM
SHARPNESS
COLOR GAIN
GAMMA
NEG.IMAGE
RETURN
OFF
OFF
OFF
17
┛
0.45
OFF
RET┛
– FREEZE: Sets moving images in freeze-frame mode.
– MIRROR
– MIRROR: Sets reversed LEFT and RIGHT image.
– V-FLIP: Sets vertically flipped video.
– ROTATION: Sets rotation up to 180 degrees.
– D-ZOOM: Expands one part of the monitor screen for viewing.
– SHARPNESS: Sets sharpness control.
– COLOR GAIN: Sets the RED GAIN or BLUE GAIN.
– GAMMA: Sets compensation according to the gamma value.
– NEG.IMAGE: Sets negative image ON/OFF.
8.9.6 3DNR
Sets three-dimensional noise reduction.
– LEVEL: Sets noise reduction level.
3DNR
LEVEL
RETURN
50
RET┛
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Integrated IR Bullet Camera
OSD Manual | en
29
8.9.7
Special
Sets the CAM TITLE, LANGUAGE, MOTION, PRIVACY, SYNC.
SPECIAL
CAM TITLE
LANGUAGE
MOTION
PRIVACY
SYNC
OFF
ENGLISH
OFF
OFF
INT
RETURN
RET┛
– CAMERA TITLE: Displays the title editing menu.
– LANGUAGE: Sets language for the OSD.
– MOTION: The camera monitors the movement of image,
and it sends an alarm signal or OSD icon.
– AREA SELECT: Select one of the four (4) motion areas.
– AREA DISPLAY: Turns display ON/OFF in the selected area.
– LEFT/RIGHT: Sets LEFT/RIGHT position in the selected area.
– WIDTH: Sets the width in the selected area.
– TOP/BOTTOM: Sets TOP/BOTTOM position in the selected area.
– HEIGHT: Sets the height in the selected area.
– SENSITIVITY: Sets the movement detection threshold value.
– MOTION VIEW: Displays the motion area on the screen.
– PRIVACY: Masks user-defined areas of the view.
– AREA SELECT: Select the mask area from 1 to 8.
– AREA DISPLAY: Toggle mask ON/OFF in selected area.
– LEFT/RIGHT: Sets LEFT/RIGHT position in selected area.
– WIDTH: Sets width in selected area.
– TOP/BOTTOM: Sets TOP/BOTTOM position in selected area.
– HEIGHT: Sets the height in selected area.
– COLOR: Select mask color.
– SYNC: Synchronizes the image from the camera and the monitor.
– INT: Internal synchronization system.
Installation Manual
| 1.0 | 2011.01
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.
30
en | OSD Manual
Integrated IR Bullet Camera
8.9.8
Reset
Resets all settings to the factory default.
RESET
FACTORY
RETURN
RESET┛
RET┛
Installation Manual
Bosch Security Systems, Inc.
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601
U.S.A.
© Bosch Security Systems, Inc., 2011
Download from Www.Somanuals.com. All Manuals Search And Download.
|