Bang Olufsen Flat Panel Television BeoVision 9 User Manual

BeoVision 9

Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

Dear Customer

Contents

Watch television

Teletext

This Guide contains information about the daily use of your

Bang & Olufsen product and about connecting and operating

external equipment. We expect your retailer to deliver, install and

set up your product.

HDR – Pause and replay

10 HDR – Recordings

On the Bang & Olufsen website, www.bang-olufsen.com, you can

ﬁnd further information and relevant FAQs about your product.

12 Access to BeoMaster 5

The needs of the user are considered carefully when designing

and developing Bang & Olufsen products. Therefore, please take

the time to tell us about your experience with your product.

15 BeoLink

To contact us, visit our website on …

www.bang-olufsen.com

or write to:

or fax:

Bang & Olufsen a/s

BeoCare

25 Advanced use

43 Installation – setup

Peter Bangs Vej 15

DK–7600 Struer

Bang & Olufsen

BeoCare

+45 9785 3911 (fax)

Technical speciﬁcations, features and the use

thereof are subject to change without notice.

3510348

0903

Download from Www.Somanuals.com. All Manuals Search And Download.

How to use your remote control

Beo4 operation

Beo5 operation

You can operate your television with

Beo5 or Beo4. The instructions in this

Guide are mainly based on Beo5.

Soft button, touch screen to select*¹

The Beo4 display shows you the activated source or function

Switch on the TV*³

Switch on a source or select a function

Back up through Beo5 displays

DTV

LIGHT

DVD

RADIO

Switch on the hard disc recorder

VMEM

RECORD

0 – 9

Bring up SCENE buttons, such as Zones or Speaker

Press again to return

Living Room

Press twice to start a recording

V MEM

RECORD

A MEM

Bring up digits to select channel or recording

Press again to return

Select channels and enter information in on-screen menus

Bring up the main menu of the active source

Switch on teletext

V.MEM

N.MUSIC

DVD

RADIO

N.RADIO

Back up through menus or press once to pause

playback and twice to stop

DTV

STOP

TEXT

Start playback

PLAY

BACK

TEXT

Exit menus completely

Search backwards or forwards or move in menus

Accept and store settings and start playback

Select colour speciﬁc functions*²

Press volume wheel next to the colour

LIST

EXIT

Turn to adjust volume

To mute, turn quickly counter-clockwise

Step through channels or move in menus

Hold for continuous step

STOP

Select colour speciﬁc functions

Press centre button to accept and store settings

Step through screen menus

Adjust volume

To mute, press the middle of the button

Display extra ‘buttons’ on the Beo4

LIST

STOP

EXIT

Search backwards or forwards

Press repeatedly to change ‘buttons’

Recordings

Back up through menus or press once to pause playback and

twice to stop

Step through channels or recordings

Hold for continuous step

Exit menus

Standby

Useful hints

^1*About buttons Light grey buttons indicate that you have to press a text in the display. Dark grey buttons

indicate that you have to press a hard button.

^*3Marked buttons can be reconﬁgured during the setup process. See p. 47.

NOTE! For general information about

remote control operation, see the Guide

enclosed with your remote control.

^2*Coloured buttons Press the wheel next to the colour to activate a coloured button.

Actual zone Indicates the actual zone as it was named during the setup process.

Soft buttons Depending on the activated source, different soft buttons appear on the screen. Touch the

screen to activate the function.

My reconﬁguration:

DTV

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Watch, record or store movies and listen to different sources, such as

the optional hard disc recorder, a connected set-top box or a music

centre.

…

V.MEM

Display and menus

Select TV’s

zone

Switch on TV

Switch on hard Show menu

disc recorder

Information about the selected source is

shown at the top of the screen. On-screen

menus allow you to adjust settings.

TV SETUP

Menu name

TUNING

PLAY TIMER

OPTIONS

Menu options

STAND POSITIONS

select

Information ﬁeld

0–9

BACK

Exit menus*⁴

Navigate in menus

Select option/ Enter data

Bring up sub-

menu/store

setting

Select option

When a menu is on the screen, you can

move between menu options, reveal

settings or enter data.

setting

Important – for more information: www.bang-olufsen.com

Remote control

⁴*NOTE! Press STOP to back up through

menus.

The instructions in this Guide are mainly based on the Beo5 remote

control, but you can also operate the TV with Beo4. On the fold-out

page in this Guide, you will ﬁnd an overview of the buttons on Beo5

and Beo4. For general information about remote control operation,

see the Guide enclosed with your remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watch television

Beo5 operation

Choose a TV channel by its number or switch to another

channel or source. Adjust the sound volume, change the

sound type or language and turn the TV.

Switch on the TV

Activate the TV source to use these

functions

Select a TV channel

Bring up a channel list

Adjust the volume

Channel name

Channel number

TV CHANNEL LIST

CNN

…

DISCOVER

CWNBC

BBCWORLD

…

SUPER CH

…

CRIME TV

CINEMA

…

Record here and now

MOVIE NW

While recording you can also watch another

…

recording, source, or TV channel.*¹

select

Turn the TV

Indicates more channels

See second source

Divide the screen to watch two sources at the same

time.

Switch off the TV

Automatic colour calibration may start automatically.

Useful hints

¹*Record here and now You cannot start a new recording if a recording is already in progress, or if the optional hard disc

recorder is full of protected recordings. Also, you cannot watch one set-top box programme while

recording another.

Automatic Colour Management Automatic Colour Management automatically compensates for colour changes on the screen for

every 100 hours of use approximately. Do not switch off the system or disconnect it from the

mains during the calibration.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

Press

0–9

Select

channel

Select

Activate

Select

channel

Select previous channel

numbers

0–9

Select page Select channel

Hold to

activate

Select page or channel and

Hold for

channel list

Adjust

volume

To mute, press in the middle

of the button

Adjust volume. To mute, turn quickly Bring back the sound by turning the

counter-clockwise wheel either way.

RECORD

STOP

Record

STOP

Press twice to start

Press twice to

stop

Start recording

Stop recording

Position

1…9

Select position*²

Stand

Turn

LIST

1–9

Select

STAND

Turn TV

Select

Press

Turn TV

position*²

P-and-P

DVD

Swap

LIST

DVD

Select

P-AND-P

Select source Swap pictures

Press

Select

source

Swap pictures

Press

Second source You can bring up two video sources. With Swap you can make the

left and right pictures switch places. With BACK you leave the

function and go to the source on the left. You can also just select

the source you wish to go to. See also p. 50 for information about

HDMI sources.

NOTE! To use the stand function, you have

to calibrate the stand ﬁrst, see p. 53. To

preset positions for the TV to turn to, see

p. 56.

²*TV positions Position 1 is the far left position and Position 9 is the far right.

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext

Beo5 operation

Operate teletext through the menu bar at the top of the

teletext page or the arrow buttons on your Beo5.

Start teletext

Access the start page of teletext.

Activate teletext to use these

functions

Move to pages

Actual page

Access teletext pages you wish to see.

Change broadcaster

Change teletext service*¹

Access teletext pages of other broadcasters.

PAGE CHANNEL LARGE HALT REC SETUP

P100

BBC

S100

Wed 13 Oct

12:39:34

Stop subpages from turning

Reveal hidden messages

… and the like.

Create MEMO pages

Nine MEMO pages are available for each channel’s

teletext service.*²

View a MEMO page

‘MEMO’ is only available if you have stored MEMO

pages.

Stop subpage turning

The arrow indicates that more options

are available. Reveal hidden text on

‘REVEAL’ and make settings on ‘SETUP’

Delete a MEMO page

Exit teletext

Leave the teletext function.

Glossary

Beo5 teletext point With the inner arrow buttons on Beo5 you can navigate in page references in a teletext page. Go to a page

referred to by pressing the centre button and back again by pressing BACK.

¹*Teletext service Each channel provides its own teletext service. Change easily between teletext pages of different channels.

MEMO pages Store a teletext page as a MEMO page to be able to access it quickly.

Large teletext To enlarge the size of the teletext page, bring up teletext, move to ‘LARGE’ in the menu bar and press the

centre button repeatedly to switch between the upper and lower half of the page and normal page size.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

Text

TEXT

Press repeatedly to change screen

mode

Press

0–9

Go to index pages (100,

200, 300 …)

Select page

Move to

‘PAGE’

Select page

Select page Move to ‘PAGE’

Index

pages

and select

Move to ‘CHANNEL’ or Press, select

Move to ‘CHANNEL’ or ‘MEMO’ then Bring up

Select

‘MEMO’ then

‘CHANNEL’

channel and accept

‘CHANNEL’

channel list channel

STOP

0–9

STOP

0–9

Stop turning Select subpage and restart

Stop turning Move to

Press

Select subpage

Restart

turning

‘HALT’

Move to ‘REVEAL’

Move to

‘REVEAL’

0–9

Select page Move to

Accept then

store

Select page Move to

Store

current

page

Move to

‘BACK’

‘SETUP’

Move to ‘CHANNEL’ or

‘MEMO’

Select MEMO page

Move to ‘CHANNEL’ or

‘MEMO’

Select MEMO

page

Move to

Press

Delete

Move to

Press Select

page

Press

twice

‘SETUP’

BACK

EXIT

Press

²*Teletext subtitles If you would like available teletext subtitles to appear

automatically for a particular channel, store the teletext subtitles

page as MEMO page 9.

NOTE! If your TV is linked via a Master Link

cable to another TV, stored MEMO pages

are not shared among these TVs. MEMO

pages must be stored manually on each

linked TV.

Dual screen When teletext is activated, pressing Text swaps between dual

screen and full screen mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – Pause and replay

Beo5 operation

With the optional hard disc recorder, pause, repeat and

resume the current programme. The TV continues saving

during replay, so you are sure to see the entire programme.

Pause

The current channel is saved in a

three-hour replay buffer

Pause the programme on the current channel.

Replay

Replay a programme that you have paused.

Go to a speciﬁc point

Enter a speciﬁc time to go to in the buffer content.

- 0:19

REPLAY

-0:05

Step backwards or forwards

Step backwards or forwards minute by minute.

Cue backwards or forwards

Press button again to change speed.

Pause replay

Pause replay of the buffer content.

19 minutes are saved in the

replay buffer

The current picture is 5 minutes behind the

live signal

Save the replay buffer

Save the buffer contents to the hard disc recorder.

Go to live signal or replay mode

Switch between the live signal and replay mode.

Glossary

Replay You cannot pause or replay a programme while the TV is recording another programme or copying a recording,

nor can you pause or replay programmes copy-protected by Macrovision. If you pause a programme for three

hours, the TV automatically starts replay from the point at which you paused the programme.

Slow replay Slow replay backwards is not possible.

Save the replay Copy the content of the replay buffer to the ‘HARD DISC CONTENT’ list. The content before the recording

buffer start time will be deleted when the TV is switched off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

Replay

Press

STOP

To return to live signal, select source

again, such as TV

Press

To return to the live signal

select the source again

PLAY

Replay

Slow replay, press again to change

speed

Replay

Slow replay, press again to

change speed

0–9

Select point

Activate numbers

Select point

Step

Backwards

Forwards

Backwards

Forwards

STOP

Press

You can step frame by frame

Press

You can step frame by frame

STOP

Stop

searching

Record

STOP

Stop

searching

RECORD

Search for start point

Activate

saving

Accept saving

Search for

start point

Press twice to

Go to live signal

Return to replay mode

Go to live

signal

Return to replay mode

Switching source You can switch from one live source, such as TV.TUNER, to another,

such as STB, at any time, but the source you leave is no longer saved

to the buffer after the switch. Instead the new source is saved.

Switching to a non-live source, such as DVD, causes the TV to stop

saving to the buffer and ends replay.

NOTE! The content of the replay buffer is

not protected. If the buffer is full and you

continue to save programmes to it, the

oldest content is deleted. If you switch off

the TV, the content of the buffer is deleted

after 60 sec.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – Recordings

Beo5 operation

Use the optional hard disc recorder to play recordings stored

on its hard disc. Playback of recordings begins automatically

after a few seconds.

Switch on the hard disc recorder

It takes up to 40 seconds to start the recorder.

Activate the source of the hard disc

recorder to use these functions

Select and play a recording

Name of the

recording

Recording time and date

Pause or stop playback

HARD DISC CONTENT

Pause or stop playback of a recording.

THE SOPRANOS

CROCODILE HUNTER

WRC RALLY

AUSTRALIAN OPEN

SAT 117

12:14

9:12

12:00

9:00

23:00

18:00

23:10

22:00

21:00

17 JUN 01:34

17 JUN

14 JUN

13 JUN

29 MAY

24 MAY

22 MAY

20 MAY

13 APR

1:00

1:12

3:25

2:55

1:05

12:30

1:55

2:15

TV 24

Switch to previous or next

Switch to the previous or next recording within a

V.AUX

DAYS OF THUNDER

CASABLANCA

group.

delete

play

Go to a speciﬁc point

protection on

Enter a speciﬁc time to go to in a recording.

Step or cue backwards or forwards

Step backwards or forwards minute by minute. Press

button again to cue faster.

Duration of

the recording

Protected recording

Browse through recordings

During playback, you can see a short list of

recordings from the chosen group.

Switch off the recorder

Glossary

Playback information To bring up playback information during playback, press the centre button. To remove

the information, press BACK or wait three seconds.

Pause and stop playback When the picture remains unchanged for eight minutes, the TV screen dims automatically.

Browse through recordings Show up to ﬁve recordings at a time during playback. You can browse through recordings

in Groups if you have set ‘FEATURE LEVEL’ to ‘ADVANCED’ and placed recordings in the

predeﬁned Groups. See pp. 28 and 57 for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

V.MEM

VMEM

Select source of recorder

Select source of recorder. Playback begins automatically of the last viewed

recording, the newest recording or a recording in progress.

PLAY

Play

recording

Open ‘HARD DISC

CONTENT’ menu

Select and

play

Open ‘HARD DISC

CONTENT’ menu

Select

recording

Slow replay

STOP

Stop

STOP

Stop

Pause

From pause mode, step frame by

frame

Pause

Previous/next

0–9

Select point

0–9

Activate

numbers

Select point

Step

backwards/

forwards

Cue backwards/forwards

Step backwards/forwards Cue backwards/forwards

PLAY

Press twice Select recording

Play recording

Press twice

Select

recording

Play recording

Switch source

Switch off TV

Switch source

Switch off TV

Playback When you select a recording to play, the TV resumes playback from

NOTE! You can bring up the ‘HARD DISC

where you left off the last time the same recording was played. If you CONTENT’ menu if you press and hold the

have viewed the recording to its end, playback starts from the

beginning. Unless otherwise instructed, the TV plays the selected

recording through to the end. The recording is then paused.

centre button. The bar at the top indicates

how full the hard disc is. A red dot

indicates if a recording is protected. For

information about protection, see p. 27.

Slow playback Slow playback backwards is not possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Access to BeoMaster 5

Beo5 operation

If your TV is equipped with the optional BeoMaster, you can

bring up BeoMaster sources on the TV screen to get access

to N.Music, N.Radio, photos, and web.

Select a BeoMaster source

When you have brought up the source selection menu,

choose from different media sources.

Activate the BeoMaster in order to

use these functions

GO Source selection

EXIT Leave mode

GO Add to playlist

Home/Return

Random on/off

Show info/Hide info

List root

Play all/Play group

Full Size cover/Track info view

Delete

Conﬁguration

Rename

Select function*¹

The menu overlay gives you quick access to selected

functions.

Switch off the BeoMaster

Useful hints

¹*Menu overlay The menu overlay shows the options you have with a selected source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

LIST

Press

Select source

Select PC

Select source

0–9

EXIT

0–9

BACK

Show menu overlay

Select function

Show menu overlay and select function

Switch off TV

Switch source

Switch off TV

Switch source

Remote control Use your remote control to switch sources on and off, search for NOTE! For further information about the

speciﬁc stations or tracks, access additional functions, and

BeoMaster, refer to the Guide enclosed

adjust volume.

with your BeoMaster.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents – BeoLink

16 BeoLink system

Connect and set up an audio system

Connect and set up a BeoLink system

Your television in a link room

Two televisions in the same room

Download from Www.Somanuals.com. All Manuals Search And Download.

BeoLink system

Beo5 operation

If you have a BeoLink system, you can operate all connected

sources from both the main room and link rooms.

TV sound on the audio speakers

Listen to sound from a TV source on your audio system

Activate main or link room sources

speakers.

Audio sound on the TV speakers

Link room

Listen to audio sound on the speakers connected to the

TV.

Use a source present in one room

Activate a main or link room source from a link room.

The source type is only present in one room.

Use a link room source

Activate a link room source in a link room. The source

type is present in both rooms.

Use a main room source

Main room

Activate a main room source from a link room. The

source type is present in both rooms.

Stereo sound in a link room

If stereo sound is selected in the link room, you cannot

distribute other main room sources to the link room

system.*¹

Useful hints

Options To use all functions properly, the products must be set to the correct options. See p. 18.

Main room source This is the central source from which you can distribute sound and pictures to link room

sources.

Link room source This source is placed in the link room and through the source you can receive sound and

pictures from connected main room sources.

Audio system Only Bang & Olufsen audio systems with Master Link support integration with the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Beo4 operation

…

LIST

Select AV*²

Select audio

speaker zone

Select video source

LIST

…

Select TV speaker Select audio source

zone

Select AV*²

Select audio source

RADIO

Operate source as usual

Select source Operate source as usual

Select source

Operate source as usual

Select source

Select source Operate source as usual

Link

LIST

Select LINK*²Select source Operate source

Press

Select source

Operate source as usual

as usual

DTV

LIST

DTV

Switch on TV Select AV*²

Select main

room source

Switch on TV

Press

Select main room source

¹*Sound Usually sound distributed from a main room video source, such as a

set-top box, to the link room is transmitted in mono. However, you can

select stereo sound.

²*NOTE! In order to display AV and LINK on

Beo4, you must ﬁrst add it to the Beo4 list of

functions. See the Guide enclosed with your

Beo4.

Changes in link If you move your link room products to other rooms, remember to get

room setup your Beo5 remote control reconﬁgured by your Bang & Olufsen retailer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect and set up an audio system

To obtain the beneﬁts of an integrated audio/video system, connect a

compatible Bang & Olufsen audio system to the TV using a Master Link

cable.

1. Connect the audio system

Connect the available sockets marked

MASTER LINK on the TV and the audio

system using a Master Link cable.

MASTER LINK

Option

pgm

…

and

2. Set option for TV

Hold

Press

Select zone in which TV

is placed

If your TV has been set up in an audio/video

system, set it to the correct option. Switch

the entire system to standby ﬁrst and place

yourself in front of the TV.

LIST

Press

LIST

0–9

Select OPTION? and Select V.OPT Select

Option

pgm

3. Set option for audio system

…

and

Hold

Press

Select zone in which

audio system is placed

Set the audio system to the correct option.

Switch the entire system to standby ﬁrst and

place yourself in front of the audio system.

LIST

Press

LIST

0–9

Select OPTION? and Select

A.OPT

Select

Option

Useful hints

TV and audio speakers Play a CD on your audio system using speakers connected to the TV, or switch on a TV

programme and send the sound to your audio system speakers.

Choice of options If you have a Beo4 remote control, options for the TV can be 1, 2, or 4 in a main room and 5

or 6 in a link room. Options for the audio system can be 0, 1, 2, 5, 6. See also p. 21.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your audio/video system can be placed together in one room, or in two

rooms with the TV in one and the audio system with a set of speakers in

another.

Select options

The TV and audio system are set up in one

room with all speakers connected to the TV.

Set the TV to Option 2 and the audio system

to Option 0.

To set the correct options with the Beo5

remote control, you must select the zone in

which your product is placed, see p. 18. To

set the correct options with the Beo4 remote

control, you can get an overview of options

on this page.

Option 2

Option 0

The TV with or without additional speakers

and an audio system with a connected set of

speakers are set up in one room.

Set the TV to Option 1 and the audio system

to Option 1.

Option 1

The audio system is set up in one room and

the TV with or without additional speakers in

another.

Option 2

Set the TV to Option 2 and the audio system

to Option 2.

Options For information about Option 4, 5 and 6, see pp. 21–22.

NOTE! Not all Bang & Olufsen audio systems

support integration with the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect and set up a BeoLink system

Connect and set up a BeoLink system to see pictures and hear sound in link

rooms. You can, for example, connect the living room TV to another video

system or to a set of speakers in another room.

Make link connections

Connect the Master Link cable to the

available socket marked MASTER LINK on the

TV.

To distribute video signals to link rooms,

connect an ordinary aerial cable to the socket

To distribute video signals to link rooms, it is

necessary to connect an RF Link Ampliﬁer to

the main room TV and a link room TV.*¹

marked LINK TV on the main connection

panel. Then run the aerial cable to the RF Link

MASTER

LINK

Ampliﬁer and the Master Link cable to the

link room. Follow the instructions enclosed

LINK TV

with the link room equipment.

RF Link

Amplifier

Select ‘LINK’ in

‘CONNECTIONS‘

Switch on the system modulator

Select

‘MODULATOR’

Select ‘OPTIONS’ in

‘TV SETUP’ menu

Reveal ‘ON’ Accept

If you have an audio setup, such as a

BeoLink Active/Passive, and you set up a

non-linkable TV in the same room, you

must set the system modulator to ‘ON’.

The factory setting is ‘AUTO’, which must

be used if you are using a linkable Bang &

Olufsen TV.

Select ‘LINK’ in

‘CONNECTIONS‘

Change the link frequency

If, e.g., a TV channel in your area is

broadcasted on the same frequency as the

factory setting for the BeoLink system; 599

MHz, you must tune the system modulator

to an unoccupied frequency.*²

Select ‘OPTIONS’ in

‘TV SETUP’ menu

Select

‘FREQUENCY’

Find unused Accept

frequency

Useful hints

¹*Connected If an audio system is already connected to the MASTER LINK socket and NOTE! Only sources with an analogue signal

equipment you wish to connect more equipment, the Master Link cable must be

can be distributed from a main room TV to

split in two and joined with the cable from the link room using a special the link room system.

junction box. Contact your Bang & Olufsen retailer for assistance.

²*Link frequency When you change the link frequency in the main room TV, make sure

that the link frequency in the link room corresponds to it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your television in a link room

If you have a BeoLink system, operate all connected systems through the TV

in a link room.

Connect link room TV

1 Connect the link room TV to the mains

supply.

2 Using your remote control, programme

the link room TV to the correct option.

3 Disconnect the link room TV from the

mains.

Follow the procedure described here when

you connect your TV for use in a link room.

4 Make the necessary connections.

5 Reconnect the link room TV to the

mains supply.

Option

pgm

…

and

Set option for a link room TV

Hold

Press

Select zone in which TV

is placed

For your entire system to function properly, it

is essential that the TV in the link room is set

to the correct option before you connect it to

the system in the main room. Place yourself

in front of the link room TV.

LIST

Press

LIST

Select OPTION? and Select V.OPT Select

Option 6*¹

BeoMaster If your TV is equipped with a BeoMaster, it cannot be set up and used in

a link room.

Timer programming Programme a Play Timer on the TV in the main room.

¹*NOTE! If you have a Beo4 and you connect

the TV for use in a link room where other link

systems are already connected, such as

speakers, you must set the TV to Option 5

instead.

Download from Www.Somanuals.com. All Manuals Search And Download.

Two televisions in the same room

If you have two TVs in the same room and one remote control for both TVs,

it is essential that the TVs are set to the correct options, for them to

function properly.

Option

pgm

and

…

Set the correct option

Hold

Press

Select zone in which TV

If you place your TV in a room where you

already have a Bang & Olufsen TV and

commands from your remote control can be

received by both TVs, you must change the

option of the secondary TV to prevent

simultaneous activation of both TVs. Place

yourself in front of the secondary TV.

is placed*¹

LIST

Press

LIST

Select OPTION? and Select V.OPT Select

Option 4

…

Beo5 – operate the TVs

BeoVision 9

Zone ‘A’

Select zone in which Select source

desired TV is placed

Normally you can activate a source simply by

pressing the relevant source button, but if

you have two TVs in the same room, you

must remember ﬁrst to select the zone of the

TV you wish to use, if you have a Beo5.

Zone ‘A’

BeoVision 9

Zone ‘B’

Useful hints

Teletext with Option 4 In order to use teletext on a TV set to Option 4, you must set up Beo4 to VIDEO 3. This limits

the Beo4 functions that can be used with TVs set to other options. For more information, see

the Guide enclosed with your Beo4.

Download from Www.Somanuals.com. All Manuals Search And Download.

LIST

Beo4 – operate TV in option 4

BeoVision 9

Option 4

Select source

Select LINK

Normally you can activate a source simply by

pressing the relevant source button, but if

your TV is set to Option 4, you must do the

following to activate a source, if you have a

Beo4.

However, if you wish to dedicate a remote

control to your secondary TV, contact your

Bang & Olufsen retailer.

LIST

LINK

LINK on Beo4 In order to display LINK on Beo4, you must ﬁrst add it to the Beo4 list

of functions. See the Guide enclosed with your Beo4 for more

information.

¹*NOTE! For information about choice of

zone, contact your Bang & Olufsen retailer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents – Advanced use

26 HDR – Record a programme

27 HDR – Edit recordings

28 HDR – Copy and group recordings

29 HDR – The Parental Lock

30 Surround sound and Home cinema

31 Sound type

32 Wake-up Timer

33 Play Timer

34 Edit and add TV channels

35 Adjust picture and sound settings

36 Calibrate colour accuracy of the screen

37 The pincode system

38 Tuner setup

40 Operate other equipment with Beo5 or Beo4

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – Record a programme

If the optional hard disc is full and you set a Timer recording or start a manual

recording, the TV automatically makes room for the new recording by deleting

old unprotected recordings.

Set a Timer recording

Bring up hard disc recorder

Select ‘TIMER

PROGRAMMING’ menu

Insert and accept Timer

settings

Select the hard disc recorder as source ﬁrst. Set

up to 15 Timers. Change from ‘DATE’ to

‘WEEKDAYS’ by means of the green button.

Timer recording via teletext

Bring up teletext and ﬁnd

desired page

Insert and accept start/stop

time

Select ‘REC’ in menu bar

Programme recordings via the desired teletext

page.

Check Timers already set

Bring up hard disc recorder

Select ‘TIMER INDEX’ menu

Check, edit or delete Timers

Check, edit, or delete Timers that are waiting to

be executed. Timers are listed chronologically.

TIMER INDEX

12:25-13:00

14:00-14:45

22:00- 23:20

12:25-12:00

22:00-23:20

2:00- 3:20

12:15-12:30

17 JUN

19 JUN

21 JUN

25 JUN

V.AUX

V.AUX 2 121

SAT

V.AUX

THE SOPRANOS

MTV

1222

AUSTRALIA

25 AUG

Monday

Tuesday

Wednesday

Thursday

Friday

SAT

123

CROCODIL

MTV

WRC RALL

23:55- 2:15

14:00-15:15

16:10-17:15

18:00-18:30

13:00-13:45

M-W---S

M--TF--

-T-TF-S

SAT

---TF--

Saturday

Sunday

delete

edit

Useful hints

Timer Timers can be edited while in progress, but some ﬁelds will be

inaccessible. Red start and stop times in the ‘TIMER INDEX’ menu

indicate recordings which overlap.

NOTE! You cannot start a new recording, if a

recording is already in progress, or if the hard

disc is full of protected recordings. Also, you

cannot record programmes copy-protected by

Macrovision.

Timer programming The ‘TIMER PROGRAMMING’ menu contains additional options when

you set ‘FEATURE LEVEL’ to ‘ADVANCED’. See p. 59.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – Edit recordings

You can protect, delete or name recordings. You can also split a recording into

two separate parts or trim it. If the optional hard disc is full, the TV

automatically makes room for new recordings by deleting old recordings.

Bring up hard disc

Protect or unprotect a recording

Select recording*¹

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Bring up

Protect/ Accept

Protected recordings are not deleted if a new

recording is started and the hard disc is full.

‘OPTIONS’ unprotect

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Delete a recording

Delete a recording you do not want, including

protected recordings.

Select recording*²

Select recording

Bring up

Mark

Delete recording

‘EDIT’

recording

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Name a recording

Bring up

‘OPTIONS’

Select

‘NAME’

Start editing

Name or rename a recording as often as you

want.

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Split a recording

Split a recording into two parts.

Bring up Select

‘EDIT’

Cue to point of split

and follow on-screen

instructions

‘SPLIT’

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Trim a recording

Bring up

‘EDIT’

Select

‘TRIM’

Cue to point to trim

from and follow on-

screen instructions

Trim away a section of a recording.

¹*Protect a recording If ‘FEATURE LEVEL’ is set to ‘BASIC’, simply toggle the red button to

protect and unprotect a selected recording.

NOTE! Protected recordings are never deleted.

Viewed or edited recordings are deleted before

recordings that have not been viewed or edited.

The oldest recordings are deleted ﬁrst.

²*Delete a recording If ‘FEATURE LEVEL’ is set to ‘BASIC’, simply press to mark a selected

recording then the yellow button to delete it.

Max. number of The max. number of recordings that can be stored on the hard disc

recordings recorder is approx. 300. If the max. number of recordings is reached, it is

not posssible to split recordings.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – Copy and group recordings

Copy your recordings to an external video recorder to back up or to save space

on the optional hard disc recorder. You can also place, move, and rename

recordings in a group.

Bring up hard disc

Copy to an external recorder

recorder menu and

Select recording

Select ‘EXTERNAL COPY’

select ‘HARD DISC

CONTENT’ menu

Bring up

‘EDIT’

If you wish to copy to a non-Bang & Olufsen

recorder, start a manual recording.

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Stop copying

Stop copying to an external recorder.

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Place recordings in a group

The name of the group appears in the top right

corner of the ‘HARD DISC CONTENT’ menu.

Select

Select recording

Select group

‘GROUP’

Bring up

‘OPTIONS’

Bring up hard disc

recorder menu and

select ‘HARD DISC

CONTENT’ menu

View recordings in a group

Select recording

Select group

Press repeatedly

to step in groups

Groups that do not contain any recordings, do

not appear in the menu.

Bring up hard disc

recorder menu and

select ‘SETUP’

Rename a group

Select ‘GROUPS’

Follow on-screen

instructions

Press

Rename a group, e.g. after the type of

recording, or after the person who made the

recording.

Bring up hard disc

recorder menu and

select ‘SETUP’

Move a group

Select ‘GROUPS’

Follow on-screen

instructions

Rearrange the order in which groups appear

when you browse through groups.

Useful hints

External recorder If the external video recorder is from Bang & Olufsen, or if you have a

Bang & Olufsen DVD Controller, the TV starts the recorder and plays the

selected recording from the beginning. Otherwise, you must switch the

external recorder on and start the recording manually.

NOTE! We recommend that you copy your most

important recordings to a recorder connected

to the TV. While recording, you cannot play

another recording and you cannot use the

Groups There are eight predeﬁned groups: ‘MOVIES’, ‘SPORTS’, ‘SCIENCE’, ‘NEWS’, replay function.

‘CHILDREN’, ‘TV DRAMA’, ‘NATURE’ and ‘TRAVEL’.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDR – The Parental Lock

Limit access to your recordings by activating the Parental Lock function. This

requires that you have entered a Parental Lock code.

Bring up hard disc

Activate/deactivate Parental Lock

Select the recordings you want to limit access to,

or deactivate Parental Lock for a recording.

recorder menu and

select ‘HARD DISC

CONTENT’ menu

Select ‘PARENTAL LOCK’ menu and

follow on-screen instructions

Select recording

Bring up

‘OPTIONS’

Bring up hard disc

recorder menu and

select ‘SETUP’

Select ‘PARENTAL

LOCK CODE’

Set a Parental Lock code

Set a four digit code to limit access to your

recordings.

Follow on-screen instructions

PARENTAL LOCK CODE

HARD DISC CONTENT

ALL

OLD CODE

. . . .

THE SOPRANOS

CROCODILE HUNTER

WRC RALLY

AUSTRALIAN OPEN

SAT 117

12:14

9:12

12:00

9:00

23:00

18:00

17 JUN

14 JUN

13 JUN

29 MAY

24 MAY

1:34

1:00

1:12

3:25

2:55

1:05

NEW CODE

. . . .

CONFIRM CODE

TV 24

OPTIONS

PROTECTION

GROUP

OFF

DEFAULT

NAME

THE SOPRANOS

ENTER CODE

. . . .

store

back

Parental Lock Parental Lock is only available if ‘FEATURE LEVEL’ is set to ‘ADVANCED’. See NOTE! If you enter an incorrect code three

p. 57.

times, the main menu appears.

Reset Parental Lock If you have forgotten your Parental Lock code, key in 9999 three times

code when ‘OLD CODE’ is highlighted to reset the code to 0000, which is the

default setting. You can now set a new Parental Lock code.

Download from Www.Somanuals.com. All Manuals Search And Download.

Surround sound and Home cinema

When you add Bang & Olufsen loudspeakers and a projector, you can turn your

TV into a Home cinema system with surround sound. You can also select a

picture format to customise the viewing experience.

Select speakers for movie sound

Select speaker combination*²

Bring up Scene

Select Speaker

display

display on Beo5*¹

The TV automatically selects the optimal sound,

when you select a source, but you can select an

available speaker combination that suits the

source you are using yourself.

Mode 1

Mode 2

Mode 3

Mode 4

Mode 5

Select picture format

Select format*²

Bring up Scene

Select Picture

display

Adjust picture up or

down

display on Beo5*¹

The TV automatically adapts the picture to ﬁll

out as much of the screen as possible, when

you select a source, but you can select a format

yourself.

Standard

Zoom

Wide

For panoramic

view or 4:3

The picture is

adjusted vertically

For genuine 16:9

widescreen

pictures

Switch to Home cinema

Bring up Scene

Select Cinema

display

Select Cinema to switch between Home

cinema and TV mode

display on Beo5*¹

Move the picture from the TV screen onto a

connected projector screen.

Useful hints

¹*Scene menu Display FORMAT for picture formats and Home cinema and SPEAKER

for speaker combinations on Beo4.

NOTE! If you have added only two front

speakers to the TV, you will only be able to

choose Mode 1–3. You can add up to two

BeoLab subwoofers to your TV.

²*Optimise and The speaker combination or the picture format is optimised if you press

Variation Optimise on Beo5. On Beo4 press GO. With each press on Variation

on Beo5, you select a variation of Standard. On Beo4 use or

Switch mode To switch between Home cinema and TV mode on Beo4, press LIST until

FORMAT is displayed then press 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound type

While you watch TV, switch between available sound types.

Sound

Change sound type or language

Bring up sound type

Press repeatedly to select

Switch between available sound types and

languages.

Sound type or language

Store your favourite sound type when tuning in TV channels. See p. 34.

Download from Www.Somanuals.com. All Manuals Search And Download.

Wake-up Timer

You can make the TV switch on automatically via the Wake-up Timer. A

Wake-up Timer is a once only Timer which lasts for one hour and is disabled

once it has been executed.

Enter a Wake-up Timer

Choose the source, channel number and start

time.

Bring up ‘TV SETUP’

Select ‘PLAY TIMER’

Select ‘WAKE-UP

TIMER’ menu

Enter and accept

settings

Check or delete a Wake-up Timer

Check or delete the settings of a Wake-up

Timer.

Select ‘WAKE-UP

TIMER’ menu

Bring up ‘TV SETUP’

Select ‘PLAY TIMER’

Change and accept

settings

WAKE UP TIMER

SOURCE

PLAY TIMER

TIMER ON / OFF

OFF

CHANNEL GROUP

PLAY TIMER INDEX

PLAY TIMER PROGRAMMING

CHANNEL

START TIME

ON / OFF

21 BBC

07:00

WAKE UP TIMER

07:00

store

Useful hints

Wake-up Timer A Wake-up Timer applies only to the TV it has been programmed on.

Make sure that the clock is set to the correct time for the Wake-up Timer Play Timer or standby Timer until the Wake-up

to be executed correctly. Timer has been carried out or disabled.

NOTE! The TV cannot be part of an ordinary

Download from Www.Somanuals.com. All Manuals Search And Download.

Play Timer

You can make your TV switch on and off automatically by setting a Play Timer

or a standby Timer in your main room system.

Bring up ‘TV SETUP’

menu and select

‘PLAY TIMER’ menu

Select ‘PLAY TIMER

PROGRAMMING’

Timed play and timed standby

Preset your TV to start and stop automatically at

the same time and day every week.

Enter and accept

settings

Select source

The source names corresponds to what the

sources are registered as in the ‘CONNECTIONS’

DTV

DTV2 (V.AUX)

V.MEM

DVD/DVD2

V.AUX2

N.MUSIC

N.RADIO

A.MEM

RADIO

DTV RADIO

STANDBY

Switch on the Play Timer

To include the TV in the Play Timer, set the

Timer to ‘ON’.

Bring up ‘TV SETUP’

Select ‘PLAY TIMER’

Select ‘TIMER ON/

OFF’ menu

Select ‘ON’ and

Select ‘PLAY TIMER

INDEX‘ in ‘PLAY

TIMER’ menu

View, edit or delete a Timer

View, edit or delete a Timer from the list of

settings you have entered.

Bring up ‘TV SETUP’

Edit settings or delete

Timer

Select Timer

Play Timer Enter up to six Play Timers. Make sure that the clock is set to the correct

time for the Timers to be executed correctly, see p. 56. The TV cannot be

part of an ordinary Play Timer or standby Timer until the Wake-up Timer

has been carried out or disabled.

NOTE! Link room systems can perform the

timed play or timed standby functions as well.

However, you must programme Timers on your

main room system and activate them on your

link room system.

Safety For safety reasons, the stand will not turn if the TV is switched on by a Play

Timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Edit and add TV channels

Rearrange the order in which the channels appear and provide them with a

name of your own choice. You can also delete a channel or add new channels,

if available. Preset up to 99 TV channels on channel numbers of their own.

Select ‘EDIT

Move a channel

Bring up ‘TV SETUP’

Follow on-screen

instructions

CHANNELS‘ in

Select channel

You can move TV channels to the desired

channel numbers.

‘TUNING’ menu

Select ‘EDIT

CHANNELS‘ in

‘TUNING’ menu

Name a channel

Name the TV channels for easy recognition.

Select

channel

Bring up ‘TV SETUP’

Enter and accept

settings

Press

Select ‘EDIT

CHANNELS‘ in

‘TUNING’ menu

Delete a channel

Delete channels you do not want.

Bring up ‘TV SETUP’

Select channel

Move

Press twice

to delete

Select ‘MANUAL

TUNING‘ in

‘TUNING’ menu

Adjust tuned channels

Bring up ‘TV SETUP’

Follow on-screen

instructions

Select item

Fine tune channel reception, indicate the

presence of coded channels and choose sound

types, etc.

Re-tune via automatic tuning

Select ‘AUTO

TUNING’ menu

Bring up ‘TV SETUP’

Select ‘TUNING’

Start auto tuning

Re-tune all TV channels automatically. Note that

all channel settings you have made will

disappear.

Add new channels

Select ‘ADD

CHANNELS’ menu

Bring up ‘TV SETUP’

Select ‘TUNING’

Start adding channels

Add channels which, e.g., have been moved by

the broadcaster. Tune in channels via the ‘ADD

CHANNELS’ menu, to leave previously tuned

channels unchanged and keep channel names,

order, and settings stored for those channels.

Useful hints

‘MANUAL TUNING’ The ‘EXTRA’ menu in the ‘MANUAL TUNING’ menu gives you access to

the menu items ‘FINE TUNE’, ‘(DECODER)’, ‘(TV SYSTEM)’ and ‘SOUND’.

‘TV SYSTEM’ If the item ‘TV SYSTEM’ appears, make sure that the correct broadcast

system is displayed before you begin tuning; ‘B/G’ (PAL/SECAM BG), ‘I’

(PAL I), ‘L’ (SECAM L), ‘M’ (NTSC M) and ‘D/K’ (PAL/SECAM D/K). For

more information, contact your retailer.

NOTE! If channels are broadcasted with two

languages and you want both languages, you

can store the channel twice, once with each

language.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust picture and sound settings

Picture and sound settings are preset from the factory to neutral values which

suit most viewing and listening situations. However, if you wish, you can adjust

these settings to your liking.

Adjust picture

Bring up ‘TV SETUP’

Select ‘OPTIONS’

Select ‘PICTURE’

Enter and accept

settings

Adjust brightness, colour and contrast. For

information on picture format, see p. 30.

Adjustments made to the ‘TINT’ setting only

apply to the current channel.

Mute the picture

Remove the picture from the screen temporarily.

Bring up Scene

display on Beo5

Select Picture

Select PictureMute to mute/restore

Select

‘ADJUSTMENT’

Adjust sound

Bring up ‘TV SETUP’

Select ‘SOUND’ in

‘OPTIONS’ menu

Enter and accept

settings

Preset volume, bass, treble or loudness, up to

two connected BeoLab subwoofers and two

default loudspeaker combinations. The contents

of the ‘SOUND’ menu varies according to what

you have connected to the TV. See also p. 30

about speaker combinations.

PICTURE

SOUND ADJUSTMENT

BRIGHTNESS

CONTRAST

COLOUR

...............

VOLUME

...............

BASS

...............

TREBLE

TINT

SUBWOOFER

LOUDNESS

DEFAULT VIDEO

DEFAULT AUDIO

NTSC signal only

1080p/i signal only

SIZE

...............

HOR. SIZE

VERT. SIZE

HOR. POSITION

VERT. POSITION

SPEAKER3

SPEAKER2

VGA signal only

store

select

Temporary settings To only store picture and sound settings until you switch off the TV, press

NOTE! Do not allow still pictures, such as logos,

and hold BACK instead of the centre button when you accept the settings. video games, computer images, and images

‘DEFAULT VIDEO’ The speaker combination chosen in the ‘DEFAULT VIDEO’ submenu is

activated automatically when you switch on a video source in the TV.

‘DEFAULT AUDIO‘ The speaker combination chosen in the ‘DEFAULT AUDIO’ submenu is

activated automatically when you switch on an audio source in the TV.

displayed in 4:3 format, to be displayed on the

screen for an extended period of time. This can

cause a permanent after-image to remain on

the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Calibrate colour accuracy of the screen

Automatic Colour Management ensures perfect colours on the screen

continuosly. During calibration, a sensor arm swings down from the TV frame

and an on-screen bar changes between various greyscale colours.

Automatic calibration

We recommend that you let the TV perform calibration automatically, instead of manually.

Approximately for every 100 hours of use, the

TV will initiate a calibration automatically, when

you press the standby button.

Activate ‘AUTO

Manual calibration

Bring up ‘TV SETUP’

Select ‘OPTIONS’

Calibration process

begins*¹

COLOUR

The TV must be switched on for more than two

minutes and be in TV mode for the ‘AUTO

COLOUR MANAGEMENT’ menu to be available.

MANAGEMENT‘

After manual calibration

Sensor arm retracts and TV returns to last

chosen source

‘CALIBRATION COMPLETE’ shortly appears on

screen

Useful hints

¹*Manual calibration All text is removed from the screen, the sensor arm swings down and

the calibration starts.

NOTE! Never switch off your system or

disconnect it from the mains during calibration.

Calibration failed If the sensor arm does not swing down fully, the calibration is not

performed and the arm is retracted if needed. If the calibration was

initiated automatically, the TV will attempt to execute the calibration the

next time it is switched off.

Download from Www.Somanuals.com. All Manuals Search And Download.

The pincode system

The pincode system prevents people who do not know the pincode from using

the TV. When the pincode system is activated and the TV has been

disconnected from the mains for 15–30 minutes, the system goes into effect.

STOP

Activate the pincode system

Bring up ‘TV SETUP’

Enter a four digit

code and accept

Re-enter the code

and accept

Press

twice

Press

Enter a four digit pincode to activate the system.

Enter pincode,

accept and select

‘NEW PINCODE‘

Enter new code,

accept, re-enter code

and accept

STOP

Press

Change the pincode

Bring up ‘TV SETUP’

Change the pincode you have chosen.*¹

Press

twice

STOP

Press

Delete the pincode

Delete the pincode you have chosen.

Enter pincode and

Bring up ‘TV SETUP’

Select ‘DELETE

PINCODE’ and accept

Press

twice

Enter the pincode

Enter pincode

If you cannot switch on the TV after

disconnection from the mains, wait 30 seconds

and try again.

If you forget the pincode

Contact your Bang & Olufsen retailer to receive

a ﬁve digit mastercode.

Enter ﬁve digit

mastercode

Accept to delete pincode, you can now

activate pincode system again

Hold when prompted

for pincode to display

ﬁve ﬁelds*²

¹*Change of pincode If you change your pincode more than ﬁve times within a three-hour

period, the ‘PINCODE’ menu becomes inaccessible for three hours,

assuming that the TV is not disconnected from the mains.

NOTE! If you are prompted for a pincode the

ﬁrst time you switch on your TV, contact your

Bang & Olufsen retailer. To cancel a pincode

entry and clear the input ﬁelds, press BACK. On

Beo4, press STOP.

Incorrect pincode Five incorrect entries will cause the TV to shut down for three hours,

during which operation is not possible. Disconnecting the TV resets the

three-hour period.

²*On Beo4 hold to bring up the ﬁve ﬁelds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner setup

Disable the TV or DVB tuner, if your TV or DVB source is a peripheral unit, such

as a set-top box.

Select ‘TUNER

Disable the internal tuner

Bring up ‘TV SETUP’

Disable/enable ‘TV

TUNER’

Disable/enable ‘DVB‘

and accept

SETUP‘ in

If you disable the TV tuner, you can activate a

connected peripheral unit with the TV button.

If you disable the DVB tuner, you can activate a

connected peripheral unit with the DTV button.

‘OPTIONS’ menu

Useful hints

Disable TV/DVB If you disable both the TV tuner and the DVB tuner, you can activate a

tuner peripheral unit acting as tuner with either the TV button or the DTV

button.

NOTE! If you have connected a Bang & Olufsen

hard disc recorder to your TV, it is

recommended not to disable the TV tuner.

‘TUNING’ menu The ‘TUNING’ menu is only available if the TV tuner is enabled. See p. 58.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operate other equipment with Beo5 or Beo4

The built-in Peripheral Unit Controller acts as an interpreter between connected

video equipment, such as a set-top box, recorder or DVD player, and your

Bang & Olufsen remote control.

Beo5 operation

Select source

Select function

The main functions of your equipment can be

operated with the Bang & Olufsen remote

control. Not all functions may be supported.

Show menu overlay*¹

If you have a Beo4, the menu overlay gives you

quick access to selected functions.

Select connected

equipment

Select function

Bring up menu overlay

Direct Beo4 operation

Activate a function without the menu overlay.

The connected equipment must be switched on.

Press coloured button

to activate function

Select channel

Hold for Programme Guide

PROGRAM GUIDE

RADIO/TV MODE

INFORMATION

PROGRAM GROUPS

SUBTITLE LANGUAGE

AUDIO LANGUAGE

SETUP

PROGRAM LIST

Useful hints

¹*Menu overlay The menu overlay shows the options you have with a selected source. You

can only bring up the menu overlay on the TV screen with a Beo4. With a

Beo5 you have access to the corresponding functions via the Beo5 display.

You cannot bring up the overlay in link rooms. Instead, press a desired

coloured button or GO followed by a number.

NOTE! Which source button activates your

peripheral unit depends on the tuner setup and

settings in the ‘CONNECTIONS’ menu. See

pp. 38 and 47.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the Bang & Olufsen remote control to gain access to the functions offered

by your non-Bang & Olufsen equipment.

0–9

Use equipment menus

Bring up equipment

Navigate in Select function

menus

Step in pages/ Enter information

Operate a connected equipment’s own menu

via the remote control. On Beo4 you may have

to press EXIT instead of STOP to return to a

previous menu.

channel lists*²

STOP

PLAY

Resume playback

Playback on a DVD player

Switch on equipment, start and stop playback,

and search back and forth.

Switch on DVD

player

Once to pause

Twice to stop

Backwards/

forwards

²*Beo4 On Beo4 you have to press GO before the arrow buttons.

Switch on or off On some connected equipment you have to press GO then 0 to switch the

equipment on and off if you have a Beo4.

NOTE! See also the guide enclosed with the

connected equipment. For further information

about supported equipment, contact your

Bang & Olufsen retailer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents – Installation

44 Set up your television

46 Expand your setup

48 Set up additional equipment

50 Connection panels

52 First-time setup of your television

54 Loudspeaker setup

56 Additional settings

58 On-screen menus

58 Cleaning

Download from Www.Somanuals.com. All Manuals Search And Download.

Set up your television

Follow the guidelines for placement and connection described on this and the

following pages.

Place the TV

When you place the TV, remember that the built-

in motor unit will turn the TV to a preset position

when you switch it on.

Due to the heavy weight of the TV, any moving or

lifting of the TV should be performed by qualiﬁed

personnel – using the proper equipment.

Remove supports

Unscrew the screws inside each support.

When you have placed the TV, remove the two

supports beneath the front frame.

Fasten base cover

The cover has strips of double-coated tape on the

back.

Before you fasten the cover permanently, try to

put it into place without removing the tape

backing.

Important

Ventilation To ensure proper ventilation, allow for at least 5 cm (2") of space on each side of the TV and 10 cm (4")

above it. Do not cover the ventilation holes on the rear.

At overheating (ﬂashing standby indicator and an on-screen warning), switch off the TV to let it cool.

You cannot operate the TV during this time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Run cables

To allow for the movement when the TV turns, the

cables must form a broad loop and be fastened to

the cable bracket.

To decide how much ‘slack’ the cables need,

gently turn the TV all the way to the left, before

you fasten the cables with cable strips to make a

‘neat’ bundle of cables.

Overview

Locate the connection panels and other important

items:

1 Standby indicator/receiver for remote control.

2 Side connection panel (input for mains supply,

aerial input for TV signal, connections for

BeoMaster).

Tilt the main connection panel (4) forward to

get acces to the sockets.

3 Cable bracket.

4 Main connection panel with built-in tray and

cover for cables.

Tilt the panel forward to remove cover.

Open tray along the side to ease access when

running cables.

NOTE! Do not allow still pictures, such as logos, video games, computer images, and images displayed

in 4:3 format, to be displayed on the screen for an extended period of time. This can cause a permanent

after-image to remain on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Expand your setup

Your TV supports a wide range of additional equipment. You can even connect a

projector or a home automation system to control room lights and curtains.

Connect video recorders only to AV1 or AV2.

Disconnect from the mains

While expanding your setup, the TV must be

disconnected from the mains.

Switch off TV

Disconnect TV from mains

Remove the cable cover

Remove the cable cover to get access to the

connection panel.

Tilt main connection panel for-

ward

Release the two locks A and

pull off cover

Press B to open the small door to

sockets for temporary

connections

Connect additional equipment

Select corresponding socket

marked CTRL

Make the connections

To operate non-Bang & Olufsen products with

Beo5, attach a Bang & Olufsen IR-transmitter to

each product. See also pp. 48-49.

Switch on the TV

Always attach covers before you connect the

TV to the mains.

Switch on TV

Attach all covers

Connect TV to mains supply

Information

‘AUTO SELECTION’ Automatic selection of connected sources, when the TV is on and detects a signal.

‘TIMER RECORDER’ Activate the Timer recording option for a connected recorder. Available if you do not have the optional

Bang & Olufsen hard disc recorder. Only available in the ‘AV1’ and ‘AV2’ menus, and can only be

activated in one of these menus at any time.

‘HDMI’ Equipment connected via an HDMI IN socket. If you have set the ‘HDMI EXPANDER’ in the

‘CONNECTIONS’ menu to ‘YES’, the ‘HDMI-C’ option in the ‘AV’ menus is replaced with ‘HDMI-C1’,

‘HDMI-C2’, ‘HDMI-C3’, and ‘HDMI-C4’.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select

Select sockets

in a socket

group and

Bring up ‘TV

SETUP’ menu

‘CONNECTIONS’

in ‘OPTIONS’

Select ‘STANDBY

OPTIONS’ menu

Follow on-screen

instructions

the TV, if it is not detected automatically by the

TV. Repeat the procedure for each socket group.

Contents of the

‘CONNECTIONS’

AV1–AV6

DISPLAY 2

Enable or disable an HDMI Expander connected

to the HDMI C socket

HDMI EXPANDER

Set a link frequency and enable the system

modulator

LINK

Source options in NONE

Nothing connected

the ‘AV1–AV6’

menus

V.MEM

Optional hard disc recorder or connected video

recorder

DVD/DVD2

DTV2 (V.AUX)

DTV

Connected DVD player or recorder

Equipment, such as a set-top box

Equipment, such as a video game console

Connected TV tuner

V.AUX2

BeoMaster or connected PC

For connection of a source centre, which may

contain up to six built-in sources (only in the

‘AV2’ menu)

CENTRE

The above are only examples of registrations, you

can register available equipment to any source

option. You may also have to register additional

equipment in the Master Link system.

‘(VGA)’ Equipment connected via VGA socket (AV5, available if you do not have the optional BeoMaster, or AV6).

‘(Y – Pb – Pr)’ Equipment connected via Y – Pb – Pr socket (AV2 or AV3).

‘STANDBY OPTIONS’ Set the set-top box to switch off when you switch source or when you switch off the TV. You can also

choose that the set-top box should always be switched on or that it should be switched on and off

manually by means of the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set up additional equipment

Set up the TV with video sources and loudspeakers.

Video signals

Connect your video signals, such as a cable,

antenna, or satellite to the sockets shown on the

diagram to the right.

Loudspeakers

POWER LINK 1

SUB

DVB-T/C

ANT 1

Use Bang & Olufsen Power Link speakers. Use the

cables enclosed with the speakers. Longer cables

are available from your Bang & Olufsen retailer.

POWER LINK

2–6

Additional video equipment

IR-transmitters: To operate non-Bang & Olufsen

products with a Bang & Olufsen remote control,

attach a Bang & Olufsen IR-transmitter to each of

the products. Connect each transmitter to the

corresponding socket marked CTRL on the main

connection panel.

Connect many different types of video equipment

at the same time. Here you can also see examples

of source names you can select for the equipment

in the ‘CONNECTIONS’ menu.

Digital television

[DTV]

AV 2

AV 3

AV 6

DVD

[DVD]

Camera

[CAMERA]

Useful hints

Equipment with HDMI output Equipment with HDMI output can be connected to any available HDMI sockets, regardless of the

particular AV socket group to which you have connected the equipment. For more information about

how to set up connected equipment for use, see p. 47.

Download from Www.Somanuals.com. All Manuals Search And Download.

Expand your setup, for example in a home cinema system with a projector and a

home automation system.

Home cinema setup

Use a projector or connect a home automation

system to the TV, so you can control room lights

and curtains.

IR-receiver

If the built-in IR-receiver for the remote control

signals is hidden behind a lowered projector

screen, you must set up an external IR-receiver as

well.

Home

Automation

system

CINEMA

BeoMaster

If your TV is equipped with a BeoMaster, use the

Ethernet socket on the side connection panel for

connection to the Internet, and the two USB

sockets to connect extra equipment to the

BeoMaster, for example a memory card reader.

Internet

USB

Ethernet

ROUTER

Audio system

Connect a Bang & Olufsen audio system with a

Master Link socket to your TV. Connect it to the

Master Link socket on the side connection panel.

See also pp. 18–19.

Mains cord and plug The supplied mains cord and plug are specially designed for the TV. If you change the plug or in any way

damage the mains cord, it can affect the TV performance. Connect the ~ socket on the side connection

panel of your TV to the wall outlet. The IR-receiver lights up in red and the TV is in standby mode and

ready to be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection panels

Any equipment you connect to the main connection panel must be registered in

the ‘CONNECTIONS’ menu. See p. 47.

PCMCIA

VIDEO

S VIDEO

SPDIF

CTRL

SPDIF

CTRL

SMARTCARD

VGA

AV 5

AV 6

CTRL SPDIF

VIDEO IN L IN

R IN

CONTROL

TTL

IR IN

S VIDEO

LINK TV

DTV DATA

^SPDIA^FV 4^CTRL

RS232 IR 1+2

AV 1

AV 2

AV 3

IR IN

MONITOR CINEMA

MASTER LINK

DISPLAY 1

DISPLAY 2

CENTRE 1

1(SUB)

DVI-D OUT

HDMI IN

ANT

POWER LINK

Aerial input socket from external aerial/analogue

cable TV network.

PCMCIA

SMARTCARD

For a compatible Bang & Olufsen audio system.

Available only if the TV has a BeoMaster.

AUX

21-pin socket for additional video equipment to

enable external copying.

AUX

USB

For connection of USB-enabled equipment.

Available only if the TV has a BeoMaster.

Ethernet*¹

For connection to the Internet. Available only if

the TV has a BeoMaster.

The CA module has one protruding edge on one

side and two on the other side. The side with two

edges should face right. When you insert a card,

the gold chip should face upwards.

~ – Mains supply

Connection to the mains supply.

Useful hints

HDMI source You can watch two HDMI sources at the same time if one of the sources is

connected to the HDMI A or HDMI B socket, and the other source is connected

to the HDMI C or HDMI D socket.

¹*Only connect to a local area network (LAN) that

does not exit your ﬂat, house or building.

Download from Www.Somanuals.com. All Manuals Search And Download.

“Greyed out” sockets on the illustration of the main connection panel may be occupied by internal connections. Do not

disconnect the cables from these sockets!

AV6

ANT (1–3)

Connect stereo headphones.

Use this socket group for equipment which you do Aerial input socket (1 – DVB–T/C) from external

not wish to have permanently connected, e.g. a

camera or a camcorder.

aerial/cable TV network (2 – DVB–S) from satellite

dish, external aerial/cable TV network (3)

occupied by optional hard disc recorder.

AV1

Socket group occupied by the optional hard disc

recorder.

VIDEO IN (AV4)

For video signal.

MASTER LINK

AV2

For a compatible Bang & Olufsen audio system.

Socket group for AV connection of additional

L-IN, R-IN (AV4–AV6)

Available if the TV does not have a BeoMaster.

video equipment.

Right and left line input.

LINK TV

AV3

Y – Pb – Pr (AV2–AV3)

Aerial output for distribution of video signals to

Socket group for AV connection of additional

video equipment.

For video signals from an external source, e.g.

HDTV source. You can use the socket in

conjunction with an AV socket or a digital audio

socket.

other rooms.

The TV keeps a signal path open between the

optional recorder and a recordable source

connected to the AV3 socket area.

This allows you to set the source on AV3 to switch

on automatically, as well as set the optional

recorder for timed recording of the source on AV3,

provided your connected equipment supports

these functions.

DTV DATA

For future use.

SPDIF (AV2–AV6)

Digital audio input socket, e.g. DVD player.

CINEMA

For a Home Automation System.

CTRL (AV2–AV6)

For IR control signals to external equipment

TTL/RS232

Only for use in Hotel setups.

connected to an AV socket.

AV4

IR IN

Socket group for AV connection of additional

S VIDEO (AV4, AV6)

For an extra IR-receiver when the TV is set up with

video equipment.

For S-VHS or Hi-8 Camcorders.

a projector.

AV5

DISPLAY 2 (DVI-D OUT)

IR 1+2

This socket group is only available if your TV is not

equipped with a BeoMaster. Use this socket group

for equipment which you do not wish to have

permanently connected, e.g. a camera or a

camcorder.

Connect a projector.

For an external IR-transmitter used with Home

cinema setups.

HDMI IN (A–D)

For High Deﬁnition Multimedia Interface video

source or PC. The sources can be registered to any For a card/module for access to digital satellite

PCMCIA/SMARTCARD

of the AV socket groups. Connect an HDMI

Expander to the HDMI C socket.

channels.

USB (on the main socket panel)

VGA

For service use only.

Socket for connection of a High Deﬁnition video

source or a PC.

Headphones To mute speakers turn the volume wheel quickly counter-clockwise. Turn the

volume wheel either way to adjust volume in headphones. To restore sound in

speakers, turn the volume wheel quickly counter-clockwise.

NOTE! Video recorders can only be connected to

the AV1 and AV2 socket groups, as these are the

only sockets groups for video output. Connect the

primary recorder to AV1 and the secondary

recorder to AV2.

POWER LINK 1 (SUB) Use a cable splitter to connect two Bang & Olufsen subwoofers.

POWER LINK 2–6 For external speakers in a surround sound setup. See also pp. 54–55.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your television

This ﬁrst-time setup procedure is activated when the TV is connected to the mains

and switched on for the ﬁrst time. If you want to change your setup at a later date,

you can access the same menus and update your settings.

Switch on the TV

Switch on

It takes the TV approx. 20 seconds to start up and

become ready for use.

Make settings

Select setting

Accept and go to next menu item

You are led through the following settings only

when you switch on the TV for the ﬁrst time.*¹

MENU LANGUAGE

TUNER SETUP

Set the on-screen menu language

Disable or enable internal TV tuner or DVB

Tune in TV channels automatically, see also p. 34. Available only if

the TV tuner is enabled, see p. 38

CONNECTIONS

AUTO TUNING

Information

Menu language Select the language for on-screen menus.

¹*NOTE! When you have made the preferred

TV tuner The ‘TUNING’ menu is only available if the TV tuner is enabled, see pp. 38 and

58.

Connections Select the type of equipment connected to each socket, the sockets used, the

product name, and the source name.

settings in a menu, you may have to press the

green button to continue to the next menu in the

ﬁrst-time setup procedure. Follow on-screen

instructions.

Auto tuning A menu for channel tuning automatically appears on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

When ﬁrst-time setup is complete, you can then set up your loudspeakers for Home

cinema use.

First-time setup of loudspeakers applies only to speakers for TV viewing.

After ﬁrst-time setup, you can set up speakers for Home cinema viewing.

See also ‘Loudspeaker setup’ on pp. 54–55 and ‘Surround sound and

Home cinema’ on p. 30.

SPEAKER TYPES

SPEAKER ROLES

SPEAKER DISTANCE

SPEAKER LEVEL

Calibrate the speakers

Set up the speakers to optimise sound from

your listening position.

SOUND ADJUSTMENT

Adjust volume, bass, treble and loudness and preset two default speaker

combinations. Select a different speaker combination at any time. See

p. 35.

Calibrate the stand

STAND ADJUSTMENT

At ‘SET LEFTMOST

At ‘SET RIGHTMOST

The motorised movement of the TV will not

work until the calibration process has been

completed.

POSITION’ turn left to the POSITION’ turn right to the

point you wish to restrict

the movement to

point you wish to restrict the

movement to

Set preferred preset position for the TV to turn to, when it is switched

on and off. See p. 56.

STAND POSITIONS

Stand adjustment Set the maximum angle the TV will turn – left and right.

NOTE! You need to calibrate the stand before you

can use the motorised movement of the stand.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loudspeaker setup

Add Power Link speakers and up to two BeoLab subwoofers to your TV and you

have a surround sound system.

Select speaker setup

Switch on TV and bring up ‘TV

SETUP’ menu

Select ‘SOUND’ in ‘OPTIONS’

Select menu

Switch on the TV in TV or Home cinema mode

before you adjust speaker settings for either

mode.

Set speaker type

Select speaker and reveal

speaker type

Select ‘SPEAKER TYPES’ menu

Each Bang & Olufsen speaker makes a sound

and is highlighted on the screen.

Set speaker role

Select the function for each connected

Reveal speaker role for each

speaker

Select ‘SPEAKER ROLES’ menu

loudspeaker, such as front, back or surround. A

speaker can have more than one role – one for

TV viewing and one for Home cinema viewing.

TV (1)

A: Right front

Home cinema (2)

Left front

B: Left front

C: Off

Left surround

Left back

D: Off

E: Left back

F: Right back

G: Off

Right back

Right surround

Right front

Centre

Set speaker role.

Information

Sound during setup During the setup process, a sound is sometimes produced by a speaker.

Check if the highlighted speaker matches the name of the speaker

making the sound.

NOTE! To make a Home cinema setup, you must

ﬁrst switch to Home cinema mode. For information

about Home cinema, see p. 30.

Speaker roles You must select the surround speakers before you can select the back

speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

If your setup includes two different viewing positions, a Home cinema setup and a

regular TV viewing setup, you must make two different loudspeaker settings.

Set speaker distance

Select ‘SPEAKER

DISTANCE’ menu

Select speaker and select distance

Enter the straight-line distances in metres

between your favourite viewing position and

the individual speakers.

If ‘MANUAL’ is

selected, select

speaker and adjust

level

Select ‘AUTOMATIC’

or ‘MANUAL’ in

‘SEQUENCE’

Calibrate the sound level

Select ‘SPEAKER LEVEL’

A calibration sound is produced alternately in

each speaker. Adjust the speakers to match the

centre speaker’s sound level.

See active sound system

See the name of the active sound system for a

source or programme on the screen.

Bring up ‘TV SETUP’

Select ‘SOUND’ in

‘OPTIONS’ menu

Select ‘SOUND SYSTEM’ menu

LEFT

RIGHT

FRONT

CENTRE

FRONT

LEFT

SURROUND

RIGHT

SURROUND

LEFT

BACK

RIGHT

BACK

Set speaker distance.

Calibrate sound level from two different viewing

positions.

Speaker level Calibrate each speaker in reference to the centre speaker to ensure an optimal

NOTE! Once you have performed the speaker

calibration, you will only need to re-calibrate the

speaker sound if you make changes to the setup.

surround sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional settings

You have the possibility to make additional settings, such as to set the positions for

the TV to turn to, to set the correct time and date and to activate, adjust and

deactivate functions related to day-to-day use of the optional hard disc recorder.

Bring up ‘TV SETUP‘

Select ‘VIDEO‘,

Positions of the TV

menu and select

Accept*¹

‘AUDIO‘ or

‘STANDBY’

Turn TV as desired

‘STAND POSITIONS’

Programme a position for when you watch TV,

listen to music, and when the TV is switched

off. See p. 53 about ﬁrst-time installation of the

stand.

Bring up ‘TV SETUP‘

menu and select

‘OPTIONS’ menu

Time and date

Select ‘CLOCK’

Set time and date

Set the time and date. Press Clock on Beo5 to

bring up the clock on the display. It disappears

again after 10 seconds.

STAND POSITIONS

VIDEO

CLOCK

TIME

20:00

AUDIO

DATE

STANDBY

MONTH

YEAR

APR

2009

STAND ADJUSTMENT

SYNCHRONISE

store

select

Information

¹*First-time setup During ﬁrst-time setup, when you have set the TV positions, press the green

NOTE! The simplest way to set the clock is to

synchronise it with the teletext service offered by

the current TV channel via the ‘CLOCK’ menu. If a

teletext service is not available, you can set the

clock manually.

button to continue ﬁrst-time setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Switch on hard disc

recorder and bring up

main menu

Set up hard disc recorder

Select option and

change settings

Select ‘SETUP’ menu

The two settings for feature level – ‘BASIC’ and

‘ADVANCED’ – determine the content of the

‘SETUP’ menu.

FEATURE LEVEL

Select ‘BASIC’ or ‘ADVANCED’ level

PARENTAL LOCK CODE*²

GROUPS*²

Enter an access code for limited access to recordings

Eight predefined groups to place recordings in

Quality of recordings (‘STANDARD’/’HIGH’)

Standard length for manual recordings

RECORDING QUALITY*²

RECORDING DURATION

CONNECTIONS

REPLAY*²

‘EXTENDED’ replay starts copying to the buffer as soon as you choose a

source. See also pp. 8–9

MENU LANGUAGE

TUNING*³

Choose between eight languages for the menu system

Fine tune the programmes stored on the hard disc recorder’s own tuner

and adjust the sound setting

CLOCK*³

Follows the time and date settings for the TV automatically

²*Hard disc recorder Functions marked with *²are only available if you set ‘FEATURE LEVEL’ to ‘ADVANCED’.

³*Tuning and clock In the ‘ADVANCED’ level ‘TUNING’ and ‘CLOCK’ is found under ‘EXTRA’.

Recording quality ‘STANDARD’ quality occupies less space on the hard disc than ‘HIGH’.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen menus

General settings: Select your Zone, TV and Menu.

Make settings

TUNING*¹

EDIT CHANNELS

p.34

ADD CHANNELS

AUTO TUNING

MANUAL TUNING

MANUAL TUNING (EXTRA)

p.34

PLAY TIMER

OPTIONS

TIMER ON/OFF

p.33

p.32

PLAY TIMER INDEX

PLAY TIMER PROGRAMMING

WAKE-UP TIMER

CONNECTIONS

AV1–AV6

p.47

DISPLAY 2

HDMI EXPANDER

LINK

TUNER SETUP

SOUND

TV TUNER*¹

DVB

p.38

SOUND ADJUSTMENT

SPEAKER TYPES

SPEAKER ROLES

SPEAKER DISTANCE

SPEAKER LEVEL

p.35

p.54

p.55

SOUND SYSTEM

PICTURE

p.35

p.56

p.52

p.36

CLOCK

MENU LANGUAGE

AUTO COLOUR MANAGEMENT

STAND POSITIONS

VIDEO

p.56

p.53

AUDIO

STANDBY

STAND ADJUSTMENT

Cleaning

Maintenance Regular maintenance, such as cleaning, is the responsibility of the user.

Screen Use a soft, dry cloth to wipe dust off the screen. Do not use liquid cleaners or aerosol cleaners.

Cabinet and controls Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a

solution of water and mild detergent, such as washing-up liquid.

Never alcohol Never use alcohol or other solvents to clean any parts of the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional hard disc recorder: Select your Zone, V.MEM and Menu.

Make settings

HARD DISC CONTENTS

EDIT*²

DELETE

p.27

p.28

SPLIT

TRIM

EXTERNAL COPY

OPTIONS*²

GROUP*²

PROTECTION

GROUP

p.27

p.28

p.27

p.29

NAME

PARENTAL LOCK

p.28

TIMER PROGRAMMING

SOURCE

p.26

CHANNEL

START TIME

STOP TIME

DATE/WEEKDAYS

PROTECTION*²

QUALITY*²

EXTRA*²

GROUP

p.26

NAME

PARENTAL LOCK

KEEP EPISODES

TIMER INDEX

SETUP

p.26

FEATURE LEVEL

BASIC – ADVANCED

p.57

PARENTAL LOCK CODES*²

GROUPS*²

OLD CODE – NEW CODE …

MOVIES – SPORTS …

STANDARD – HIGH

RECORDING QUALITY*²

RECORDING DURATION

CONNECTIONS

MANUAL RECORDING

NONE – VMEM – DVD …

OFF – BASIC – EXTENDED

REPLAY*²

MENU LANGUAGE

EXTRA*²

p.57

TUNING

CLOCK

p.57

RECORD/STOP RECORDING

pp.4–5

FEATURE LEVEL Default setting from the factory is ‘BASIC’.

¹*NOTE! The ‘TUNING’ menu is only available if the

TV tuner is enabled in the ‘TUNER SETUP’ menu.

²*’ADVANCED’ feature level only.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety copy and anti-virus program

Always keep copies of your data to ensure that your photos, music ﬁles, etc. are not

lost in the event of a system or program failure. The BeoMaster features an anti-

virus program that blocks the most common computer viruses.

Safety copy

Anti-virus program

It is the responsibility of the user to regularly make A virus attack can result in system breakdown and

safety copies of the data, including but not limited loss of important data. In serious cases the

to ﬁles, photos, music, etc. It is the responsibility

of the user to ensure that this data is available on

media which can be immediately transferred back

to the BeoMaster or in the event that the

BeoMaster may have to be handed in for service.

A repair caused by a virus attack is NOT covered

by guarantee. The BeoMaster features an anti-

virus program. The program protects against the

BeoMaster is replaced, to the new BeoMaster, and most commonly used hacker programs. The

it is the responsibility of the user to reinstall these

safety copies when necessary.

program is automatically updated for a least ﬁve

years via the Internet provided that the BeoMaster

is constantly connected to the Internet. The

program is installed to instantly and without

notiﬁcation remove all ﬁles containing a virus. Files

transferred to the BeoMaster may be deleted as a

result.

A safety copy may be placed on your ofﬁce

computer or any other external devices, such as a

portable hard disk, or the data may be copied to

CD-roms or DVD discs.

Data must also be safety copied when handing in

the BeoMaster for service. Often it will be

Bang & Olufsen cannot be held liable for an loss

as a consequence of virus attack.

necessary to format data media as part of the

repair and such formatting with the consequential

loss of data will take place without notice. Bang &

Olufsen cannot be held liable for any loss of data.

Re-installation of data

In case you need to re-install your media

collection on the BeoMaster, you must use

BeoPlayer, BeoPort or BeoConnect (for MAC users

only) software to transfer your collection to the

BeoMaster. This ensures that you will not lose the

associated tag information.

Download from Www.Somanuals.com. All Manuals Search And Download.

End User Licence Agreement – EULA

On the BeoMaster a limited edition of Windows XP^®is embedded. To use this

edition, you must read the EULA terms below.

EULA Terms

Limitations on Reverse Engineering, Decompilation,

You have acquired a device, a BeoMaster, that

includes software licensed by AmiTech from

Microsoft Licensing, GP or its afﬁliates. Those

installed software products of MS origin, as well

as associated media, printed materials, and online

or electronic documentation, are protected by

and Disassembly. You may not reverse engineer,

decompile, or disassemble the SOFTWARE, except

and only to the extent that such activity is expressly

permitted by applicable law notwithstanding this

limitation.

international intellectual property laws and treaties. SOFTWARE TRANSFER ALLOWED BUT WITH

The SOFTWARE is licensed, not sold. All rights

reserved.

RESTRICTIONS. You may permanently transfer

rights under this EULA only as part of a perma-

nent sale or transfer of the Device, and only if the

IF YOU DO NOT AGREE TO THIS END USER LICENSE recipient agrees to this EULA. If the SOFTWARE is

AGREEMENT EULA, DO NOT USE THE DEVICE OR

COPY THE SOFTWARE. INSTEAD, PROMPTLY

CONTACT AMITECH FOR INSTRUCTIONS ON

an upgrade, any transfer must also include all

prior versions of the SOFTWARE.

RETURN OF THE UNUSED DEVICE; FOR A REFUND. EXPORT RESTRICTIONS. You acknowledge that

ANY USE OF THE SOFTWARE, INCLUDING BUT

NOT LIMITED TO USE ON THE DEVICE, WILL

CONSTITUTE YOUR AGREEMENT TO THIS EULA

(OR RATIFICATION OF ANY PREVIOUS CONSENT).

SOFTWARE is subject to U.S. export jurisdiction.

You agree to comply with all applicable internatio-

nal and national laws that apply to the SOFTWARE,

including the U.S. Export Administration

Regulations, as well as end-user, end-use and

destination restrictions issued by U.S. and other

governments. For additional information see

http://www.microsoft.com/exporting/

GRANT OF SOFTWARE LICENSE. This EULA grants

you the following license: You may use the SOFT-

WARE only on the DEVICE.

NOT FAULT TOLERANT. THE SOFTWARE IS NOT

FAULT TOLERANT. AMITECH HAS

INDEPENDENTLY DETERMINED HOW TO USE THE

SOFTWARE IN THE DEVICE, AND MS HAS RELIED

UPON AMITECH TO CONDUCT SUFFICIENT

TESTING TO DETERMINE THAT THE SOFTWARE IS

SUITABLE FOR SUCH USE.

NO WARRANTIES FOR THE SOFTWARE. THE SOFT-

WARE is provided AS IS and with all faults. THE

ENTIRE RISK AS TO SATISFACTORY QUALITY, PER-

FORMANCE, ACCURACY, AND EFFORT

(INCLUDING LACK OF NEGLIGENCE) IS WITH YOU.

ALSO, THERE IS NO WARRANTY AGAINST INTER-

FERENCE WITH YOUR ENJOYMENT OF THE SOFT-

WARE OR AGAINST INFRINGEMENT. IF YOU HAVE

RECEIVED ANY WARRANTIES REGARDING THE

DEVICE OR THE SOFTWARE, THOSE WARRANTIES

DO NOT ORIGINATE FROM, AND ARE NOT

BINDING ON, MS. No Liability for Certain Damages.

EXCEPT AS PROHIBITED BY LAW, MS SHALL

HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL,

CONSEQUENTIAL OR INCIDENTAL DAMAGES

ARISING FROM OR IN CONNECTION WITH THE

USE OR PERFORMANCE OF THE SOFTWARE. THIS

LIMITATION SHALL APPLY EVEN IF ANY REMEDY

FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT

SHALL MS BE LIABLE FOR ANY AMOUNT IN

EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS

(U.S. $250.00)

Download from Www.Somanuals.com. All Manuals Search And Download.

Waste Electrical and Electronic Equipment Electrical and electronic equipment, parts and

(WEEE) – Environmental protection batteries marked with this symbol must not be

disposed of with normal household wastage; all

electrical and electronic equipment, parts and

contamination of nature with the hazardous

substances which may be present in electrical and

electronic products and equipment.

Your Bang & Olufsen retailer will advise you of the

correct way of disposal in your country.

batteries must be collected and disposed of

separately.

When disposing of electrical and electronic

If a product is too small to be marked with the

symbol, it will appear in the User Guide, on the

Guarantee certiﬁcate, or on the packaging.

equipment and batteries by use of the collection

systems available in your country, you protect the

environment, human health and contribute to the

prudent and rational use of natural resources.

Collecting electrical and electronic equipment,

batteries and waste prevents the potential

This product is in conformity with the

provisions of the Directives 2004/108/

EC and 2006/95/EC.

Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the

double-D symbol are registered trademarks of

Dolby Laboratories.

This product incorporates copyright protection tech-

nology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other

limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or

disassembly is prohibited.

Conﬁdential unpublished works.

Manufactured under license under

U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;

5,978,762; 6,487,535; 7,003,467; 7,212,872 &

other U.S. and worldwide patents issued &

pending.

This product incorporates copyright protection tech-

nology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other

limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering

or disassembly is prohibited.

DTS, DTS Digital Surround, ES, and Neo:6 are

registered trademarks and the DTS logos, and

Symbol are trademarks of DTS, Inc.

Acknowledgements and liability

Product names mentioned in this guide may be

trademarks or registered trademarks of other

companies.

Portions utilize Microsoft Windows Media

Windows Media and the Windows Logo are

registered trademarks of Microsoft Corporation in

the United States and/or other countries.

Please note that Bang & Olufsen will, in no event,

be liable for any consequential, incidental or

indirect damages arising out of the use or inability

to use the software.

Download from Www.Somanuals.com. All Manuals Search And Download.

Acer Laptop Ferrari 3200 User Manual
Acer Personal Computer M265 User Manual
Air King Ventilation Hood AK965 User Manual
American DJ Indoor Furnishings Titan User Manual
American Standard Indoor Furnishings 034782 XXX0A User Manual
Atlona Switch AT HDMI V41 User Manual
Axis Communications Security Camera 233D User Manual
Behringer Music Pedal TO100 User Manual
Beko Clothes Dryer DV 2570 x User Manual
Beko Refrigerator CNE63721 DE User Manual