MIC-3043
MIC-3043A
MIC-3043A-B
MIC-3043B
MIC-3043B-B
MIC-3043C
MIC-3043C-B
MIC-3043D
MIC-3043D-B
4U compactPCI platform with
cPCI Power supply/Removable
HDD Bay
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty (1 year)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for one year
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test-
ing, most of our customers never need to use our repair service. If an
Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will
be billed according to the cost of replacement materials, service time and
freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1.
Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2.
3.
Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
If your product is diagnosed as defective, obtain an RMA (return
merchandise authorization) number from your dealer. This allows
us to process your return more quickly.
4.
5.
Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring. We recommend the use
of shielded cables. This kind of cable is available from Advantech. Please
contact your local supplier for ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference
at his own expense.
CCC Class A
The statement for this A level product, in the living conditions, this prod-
uct may cause harmful interference to radio communications. In this kind
of situation, the user may need to take measures to rectify the disturbance.
MIC-3043 User Manual
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support and Assistance
Step 1. If you have any technical questions about the MIC-3043 or any
other Advantech products, please visit our support website at:
Step 2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional
assistance. Please have the following information ready before
you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, appli-
cation software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Document Feedback
To assist us in making improvements to this manual, we would welcome
comments and constructive criticism. Please send all such - in writing to:
For more information about Advantech's products and sales information,
please visit: http://www.advantech.com
Packing List
Before setting up the system, check that the items listed below are
included and in good condition. If any item does not accord with the
table, please contact your dealer immediately.
• One MIC-3043 CompactPCI enclosure with backplane
• One box of accessories
• One warranty certificate
• One CD-ROM disk for user manual (PDF file)
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
1.
2.
3.
Read these safety instructions carefully.
Keep this User's Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning.
Use a damp cloth. Do not use liquid or spray detergents for clean-
ing.
4.
For plug-in equipment, the power outlet socket must be located
near the equipment and must be easily accessible.
5.
6.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Drop-
ping it or letting it fall may cause damage.
7.
8.
9.
The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before con-
necting the equipment to the power outlet.
Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or elec-
trical shock.
13. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked
by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE MAY GO BELOW -
20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM-
AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A
CONTROLLED ENVIRONMENT.
MIC-3043 User Manual
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH THE
SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER, DISCARD USED BATTERIES ACCORD-
ING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-
1:1982 is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1.
Advantech disclaims all responsibility for the accuracy of any statements
contained herein.
Wichtige Sicherheishinweise
1.
2.
3.
Bitte lesen sie Sich diese Hinweise sorgfältig durch.
Heben Sie diese Anleitung für den späteren Gebrauch auf.
Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-
wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient
ein angefeuchtetes Tuch zur Reinigung.
4.
Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und
leicht zugänglich sein.
5.
6.
Das Gerät ist vor Feuchtigkeit zu schützen.
Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.
Ein Kippen oder Fallen könnte Verletzungen hervorrufen.
7.
Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät
vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen
nicht abgedeckt werden.
8.
9.
Beachten Sie beim. AnschluB an das Stromnetz die AnschluBw-
erte.
Verlegen Sie die NetzanschluBleitung so, daB niemand darüber
fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden.
10. Alle Hinweise und Warnungen die sich am Geräten befinden sind
zu beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten
Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-
nung eine Beschädigung vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.
elektrischen Schlag auslösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele-
ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff-
net werden.
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
zu trennen und von einer qualifizierten Servicestelle zu überprüfen:
a - Netzkabel oder Netzstecker sind beschädigt.
b - Flüssigkeit ist in das Gerät eingedrungen.
c - Das Gerät war Feuchtigkeit ausgesetzt.
d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funk-
tioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erz-
ielen.
e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der
Batterie.Ersatz nur durch densellben order einem vom Hersteller
empfohlene-mahnlichen Typ. Entsorgung gebrauchter Batterien
navh Angaben des Herstellers.
16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf
nicht fach-männische Weise gewechselt wird. Verfangen Sie die
Batterie nur gleicher oder entsprechender Type, wie vom Hersteller
empfohlen. Entsorgen Sie Batterien nach Anweisung des Herstell-
ers.
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000
beträgt 70dB(A) oder weiger.
Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend
der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die
Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the
products from damage.
1.
To avoid electrical shock, always disconnect the power from your
PC chassis before you work on it. Don't touch any components on
the CPU card or other cards while the PC is on.
2.
Disconnect power before making any configuration changes. The
sudden rush of power as you connect a jumper or install a card may
damage sensitive electronic components.
MIC-3043 User Manual
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 1 Hardware Configuration................................ 2
Chapter 2 Installation ....................................................... 8
2.3.5 Configuring the built-in RAID (SCSI) by RIO module
(MIC-3043C series only) ................................................. 12
2.3.6 Configuring the built-in IDE for the RIO module
(MIC-3043A and IC-3043B series) .................................. 13
2.3.7 Configuring the built-in SATA for the RIO module
(MIC-3043D series) .................................................... 14
Chapter 3 Backplane....................................................... 18
ix
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Pin Assignments ............................................ 26
MIC-3043 User Manual
x
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
Hardware Configuration
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Hardware Configuration
1.1 Introduction
The MIC-3043 is a 4U-high enclosure designed as a high availability platform
that supplies six CompactPCI slots for rack mounting. At the same height as a
typical 4U platform, the MIC-3043 offers the equivalent capacity of 6U slot sup-
port in CompactPCI format. Thus, the maximum space efficiency required for
applications like CT and networking is easily achieved. There are two compatible
backplane solutions for the MIC-3043: one with H.110 CT bus support, and one
without. MIC-3043 is also equipped with a 2+1 (500W+250W) hot-swappable/
redundant AC or DC compactPCI power supply that can fulfill most application
requirements in a 4U-high system. With 1U space reserved for a storage device
(SCSI or IDE) on top of the chassis, it gives maximum flexibility for most appli-
cations. The MIC-3043 has one slim-line CD-ROM drive built-in to maximize the
available space in this 4U-high chassis. With a flexible modular design, the chas-
sis accommodates a hot-swappable cooling fan, easily-maintainable power sup-
ply, and system status monitoring and control. For those mission-critical
applications with high-manageability demands, MIC-3043 is compatible with a
Chassis Management Module, the MIC-3924L-A, which is a stand-alone system
environment monitoring module.
There are eight MIC-3043 series:
• MIC-3043A: 4U-high CompactPCI enclosure with 6-slot backplane
(MIC-3811) that supports H.110 CT bus, removable IDE device bay,
hot-swappable cooling fan modules. Power supply not included.
• MIC-3043A-B: identical to MIC-3043A chassis including 1+1
(250W+250W) redundant AC cPCI power supply.
• MIC-3043B: A 4U-high CompactPCI enclosure with 6-slot backplane
(MIC-3812) that doesn't support H.110 CT bus, removable IDE device
bay, hot-swappable cooling fan modules. Power supply not included.
• MIC-3043B-B: identical to MIC-3043B chassis including 1+1
(250W+250W) redundant AC cPCI power supply.
• MIC-3043C: A 4U-high CompactPCI enclosure with 6-slot backplane
with CT bus support, hot-swappable SCSI device bay, hot-swappable
cooling fan modules. Power supply not included.
• MIC-3043C-B: identical to MIC-3043C chassis including 1+1
(250W+250W) redundant AC cPCI power supply.
MIC-3043 User Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• MIC-3043D: A 4U-high CompactPCI enclosure with 6-slot backplane
with CT bus support, removable/ hot-swappable SATA device bay,
hot-swappable cooling fan modules. Power supply not included.
• MIC-3043D-B: identical to MIC-3043D chassis including 1+1
(250W+250W) redundant AC cPCI power supply.
Note:
(1) For RoHS version, the ordering number will
plus an "E" in the last such as MIC-3043DE.
(2) Please contact local distributor to order DC
and 2+1 (500W+250W) power supplies.
1.2 Features
• Six 6U card slots
• Supports front and rear I/O
• Supports H.110 CT application or non-CT application
• SCSI or IDE storage devices support
• 2+1 (500W+250W) hot swappable/redundant AC or DC CompactPCI
power supplies
• Hot-swap fan modules
• Integrated intelligent fault detection and alarm module, MIC-3924L-A.
1.3 Specifications
1.3.1 General
• Construction: Aluminum frame and galvanized sheet steel
• I/O interfaces: 6-slot space (24 TE), including one system slot and five
peripheral slots
• "Hot-swappable" platform complies with PICMG 2.1 R 1.0 Hot Swap
Specification
3
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions and Weight
• WxHxD: mounting flanges not included:
• 4U: 440x177x320 mm (17.3x7x12.6")
• Weight: 18 kg (39.7 lb) with 2+1 (500W+250W) redundant PSU
Mechanical and Environmental Specifications
• Operating temperature: 0 ~ 45° C
• Storage temperature: -20° C ~ 60° C
• Relative humidity: 10 ~ 95% @ 40° C, non-condensing
• Operating altitude: 0 ~ 3,048 meters (0 ~ 10,000 feet)
• Storage/transit altitude: 0 ~ 12,190 meters (40,000 feet)
• Shock: 10 G (operating); 30 G (storage/transit)
• Random vibration: 1.0 Grms (operating) without HDD
1.3.2 Hot-swap Fans
• Air flow: 193 CFM (front side Fan/hot swappable); 61.3 CFM (Rear
Side Fan)
• Power consumption: 1.42 A @12 V (TYP); 0.3 A @12 V (TYP)
• Rated fan speed: 3000 RPM; 3400 RPM
• Life expectancy: 50,000 hours @ 25° C
1.3.3 Power Supply
• Input:
1. AC: 100~240 V @ 47~63 Hz, full range (for MIC-3043X-A models)
2. DC: -48 V (TYP), -36~-72 V range (Optional)
•
•
•
•
•
Output: 2+1 (500W+250W) hot swappable and redundant AC or DC w/PFC
Maximum load: +3.3 V @ 36 A, +5 V @ 50 A, +12 V @ 10 A, -12 V @ 1 A
Minimum load: +3.3 V @ 0 A, + 5 V @ 2 A, +12 V @ 0 A, -12 V @ 0 A
MTBF: AC: 266,241 hours @ 25° C; DC: 92,859 hours @ 30° C
Safety: UL/CE/TUV /CCC
MIC-3043 User Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installation
2.1 Initial Inspection
We have carefully inspected the MIC-3043 mechanically and electrically
before shipping. It should be free of marks and scratches and in perfect
working order upon receipt. As you unpack the MIC-3043, check it for
signs of shipping damage (damaged box, scratches, dents, etc.). If it is
damaged or fails to meet specifications, notify our service department or
your local representative immediately. Also notify the carrier. Retain the
shipping carton and packing material for inspection by the carrier. After
inspection, we will make arrangements to repair or replace the unit.
Warning! We strongly recommend that only qualified,
experienced personnel install or remove com-
ponents. They must exercise extreme caution
when doing so.
2.2 The MIC-3043 Illustration
The MIC-3043 is designed for easy installation and maintenance. Figure
2-1 and Figure 2-2 illustrate important components on the front and hot-
swappable parts of the enclosure.
Figure 2.1: Front view of MIC-3043
MIC-3043 User Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.2: Front view of MIC-3043
2.3 Installation Procedures
2.3.1 Card Installation and Removal
The CompactPCI connectors are firm and rigid, and require careful han-
dling. Improper installation of a card can easily damage the backplane of
the chassis.
The system card can be installed only in the system slot. The Compact-
PCI specification allows the system slot to be in any position on the back-
plane. Do not insert the system card into any other slot, and do not insert
a peripheral card into the system slot. The MIC-3043 accepts different
backplanes, so the location of the system slot may vary. The system slot
is marked by a triangle enclosing the slot number. Please refer to the
backplane user's manual.
The insert/eject handles on CompactPCI cards help users to install and
remove the cards easily and safely. Follow the procedures below to install
a card into a chassis:
To install a card:
1.
Hold the card vertically. Be sure that the card is oriented correctly.
The components of the card should be pointing to the right-hand
side.
9
Chapter2
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Make sure that the handles of the card are not latched. Release the
handles if they are latched. Handles from different vendors may
have different latch designs.
Caution!!!
Keep your fingers away from the latch hinges
to prevent your fingers from getting pinched.
3.
4.
Insert the card into the chassis by sliding the upper and lower edges
of the card into the card guides.
Push the card into the slot gently by sliding the card along the card
guide until the handles meet the rectangular holes of the cross rails.
Figure 2.3: Installing a card into the chassis
Note:
If the card is correctly positioned and has been
slid all the way into the chassis, the handles
should match the rectangular holes. If not,
remove the card from the card guide and
repeat step 3 again. Do not try to install a card
by forcing it into the chassis.
5.
6.
Pull the upper handle down and lift the lower handle up to push the
card into place.
Secure the card by locking the handles into place.
MIC-3043 User Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove a card:
1.
2.
3.
Unscrew the screws on the card front panel. Release the locking
latches on the handles.
Lift the upper handle up and press the lower handle down to release
the card from the backplane.
Slide the card out.
2.3.2 Before Operating the System
Before operating your system, first check your power supply source.
Adjust the switch on the power supply to the correct voltage.
Two mounting flanges are included for users who would like to install the
MIC-3043 on a 19" rack.
2.3.3 Installing a 3.5" Hard Disk Drive
Follow these procedures to install 3.5" hard disk drives in the MIC-3043:
1.
Open the disk tray door and remove the mobile rack. For a SCSI
version, the SCSI ID is shown on the mobile rack panel. This is the
same ID that the SCSI control would find after system startup.
2.
Mount the HDD (SCSI/IDE/SATA) on the mobile rack with
screws.
3.
4.
Slide the HDD with mobile rack back into the tray.
Power on the system and check that the HDD can be found at the
SCSI initialization.
Note:
(1) The SCSI version (MIC-3043C) must be
used with a RIO module that has a SCSI con-
troller, like RIO-3309S-A.
(2) The SCSI ID is assigned by the internal
SCSI adaptor of MIC-3043, #0 and #1 are
fixed and cannot be changed. Users can read
the number on the disk mobile rack..
11
Chapter2
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.4 Connecting the rear I/O module
The MIC-3043 must be used with a proper rear I/O module. For enclo-
sures with a SCSI drive bay, the rear I/O module must also support the
internal SCSI function (e.g. RIO-3309S-A1). Please refer to the recom-
mended configuration list for details. To install the RIO module, please
follow the steps below:
1.
2.
3.
4.
Remove the blank panel above the system RIO slot. (We suggest
removing all the blank panels before inserting the RIO module.
Users will find two cables inside, one IDE (40-pin) cable and one
SCSI cable (68-pin)
Connect each cable to its connector on the I/O board, and then slide
the RIO module into the card cage.
Power up the system and check that all the storage devices work
properly.
2.3.5 Configuring the built-in RAID (SCSI) by RIO module
(MIC-3043C series only)
The MIC-3043C supports two SCSI HDD bays. The SCSI HDDs must be
used in conjunction with a RIO module that has SCSI RAID-1 built-in.
For details about configuring the RAID feature, please refer to the RIO
module user manual.
Note:
(1) Not all RIO modules support SCSI feature with
RAID function.
(2) RIO-3309S modules support built-in Adaptec
AIC-7901 (Ultra 320 SCSI controller chip) with
RAID function.
Figure 2.4: SCSI adaptor
MIC-3043 User Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.6 Configuring the built-in IDE for the RIO module
(MIC-3043A and IC-3043B series)
The MIC-3043A and MIC-3043B have IDE versions that support a
removable HDD (not hot-swappable). Since there are many different
HDD connectors on the market, please refer to the combination list
"HDD number for type A" or "HDD number for type B" and Note 3
(below) before purchasing the IDE HDD. An illustration of the type B
adaptor is shown in Figure 2-5 on the next page.
Note:
(1) The IDE CD-ROM has to use the "USB to IDE"
interface.
(2) There are two types of IDE adapters. The
default IDE adapter is type A. Users may also find a
type B adaptor included in the accessory box.
(3) AVL of HDD drive for two IDE adapter types.
Table 2.1: HDD number for type A
Seagate
IBM
Maxtor
HITACHI
ST340016A
ST32122A
ST313620A
ST320413A
DJNA-371350
DiamondMax
Plus 8
IC35L120AVV2
07-0
Table 2.2: HDD number for type B
Maxtor
4G120J6
13
Chapter2
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.5:IDE adaptor (type B
2.3.7 Configuring the built-in SATA for the RIO module
(MIC-3043D series)
MIC-3043D has SATA versions that support a removable or hot-swappa-
ble HDD which depends on RIO module type. Hot-swappable mode must
use RIO module supporting SATA interface; conversely, IDE interface is
only for removable. The default setting is through IDE interface. There is
a DIP switch on HDD backplane for IDE/SATA selection. An illustration
of the switch location is shown in Figure 2-6 as below.
Figure 2.6: The location of jumper switch
Figure 2.7: Setting table for IDE/SATA selection
MIC-3043 User Manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.8 Replacing the Hot-swap Fan
The MIC-3043 provides one hot-swap fan. Please refer to Figure 2-1 and
2-2. The fan can be removed without turning off the system power or
interrupting the system operation.
Follow these steps to replace a fan:
1.
2.
3.
4.
5.
Unfasten the fan holder.
Slide the fan holder out.
Replace the old fan with a new one.
Slide the fan holder in.
Fasten the new fan holder.
Figure 2.8: Hot-swappable fan maintenance
15
Chapter2
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Backplane
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Backplane
3.1 General Information
There are two backplanes models that are compatible with the MIC-3043
series. MIC-3043A, MIC-3043C and MIC-3043D support the H.110 CT
bus backplane, the MIC-3811. The MIC-3043B supports a non-CT back-
plane MIC-3812. Both backplanes provide six CompactPCI slots with
one slot dedicated to the CPU board. The MIC-3043 supports front I/O
wiring, providing simplified system cabling. The backplane also provides
several 3-pin connectors to connect a hot-swappable cooling fan module.
The MIC-3043 complies with PICMG 2.1 Hot-Swap Specification, pro-
viding full hot-swapping capability. Users can build a hot-swap system
using hot-swap plug-in boards and software.
3.2 Features
• Six CompactPCI slots (one system slot and five peripheral slots)
• 64-bit PCI bus compliant
• Complies with PICMG 2.1 Hot-Swap Specification
• Accepts 2+1 (500W+250W) hot-swappable/redundant AC or DC Com-
pactPCI power supplies
• Chassis alarm module for environment monitoring.
• Hot-swappable fan interface
• Supports dual SCSI or IDE HDD bays
3.3 Specification
• Six CompactPCI slots (one system slot and five peripheral slots)
• PCI Bus width: 64-bit
• Power connector: Two AC/DC power connectors for separate power
input support
• Complies with CompactPCI Specification PICMG 2.0, R.3.0
• Complies with CompactPCI Hot-Swap Specification PICMG 2.1, R2.0.
MIC-3043 User Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
• Complies with CompactPCI Front-Access Power Connectors PICMG
2.11, R3.0.
• Complies with CompactPCI Computer Telephony PICMG2.5, R1.0
(optional)
• Dimensions: 440 x 177 x 320 mm (17.3" x 7" x 12.6")
• Operating temperature: 0° C ~ 45° C
3.4 Slot Assignments
The CompactPCI specification defines slot numbering separation for
physical and logical slots. Each slot has a physical number and a logical
number (refer to the CompactPCI specification version 2.0 R3.0 for fur-
ther information on slot assignments). The physical numbers are printed
on the backplane, enclosed in circles or triangles. Slot5 of MIC-3811 and
MIC-3812, marked by a triangle, is the system slot and can only be used
by a CPU board. The other slots are peripheral slots. The logical number
of each slot is defined according to the IDSEL signal and the associated
address used to select the slot. Table 3-1 shows the system slot and
peripheral slot relationships on the backplane. The system slot has a logi-
cal number of 5, and peripheral slots have logical numbers of 1~4, and 6.
The connectors in logical slot 1 are designated as 1-P1, 1-P2, and 1-P3
from the bottom up. Nomenclature for connectors in the other slot is sim-
ilar, such as 2-P1 and 2-P2.
Connector S5P1 on the system slot (slot 5) is a keyed connector providing
a 32-bit CompactPCI bus between the system slot and the peripheral slot.
Connector S5P2 on the system slot (slot 5) is an un-keyed connector pro-
viding 64-bit CompactPCI bus between the system slot and the peripheral
slots. Connector S5P3 on the system slot (slot 5) is open for user defini-
tion. The pin assignment of connector S5P4 and S5P5 is only for H.110
CT bus support with MIC-3043A and MIC-3043C. For MIC-3043B,
they are open for user definition.
Please check appendix A for the pin assignment of all connectors on the
backplane.
19
Chapter3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3.1: System to peripheral slot signal assignment
System Slot (Logical Slot 5) Peripheral Slot (Logical Slot 6)
CLK4
AD31
P1:D6
P1:E6
P1:A6
P1:E5
CLK
P1:D6
P1:B9
P1:A6
P1:E5
IDSEL
REQ#
GNT#
REQ0#
GNT0#
System Slot (Logical Slot 5)
Peripheral Slot (Logical Slot 4)
CLK1
AD30
P2:A1
P1:A7
P2:C1
P2:D1
CLK
P1:D6
P1:B9
P1:A6
P1:E5
IDSEL
REQ#
GNT#
REQ1#
GNT1#
System Slot (Logical Slot 5)
Peripheral Slot (Logical Slot 3)
CLK2
AD29
P2:A2
P1:B7
P2:E2
P2:D2
CLK
P1:D6
P1:B9
P1:A6
P1:E5
IDSEL
REQ#
GNT#
REQ2#
GNT2#
System Slot (Logical Slot 5)
Peripheral Slot (Logical Slot 2)
CLK3
AD28
P2:B2
P1:C7
P2:E2
P2:C3
CLK
P1:D6
P1:B9
P1:A6
P1:E5
IDSEL
REQ#
GNT#
REQ3#
GNT3#
System Slot (Logical Slot 5)
Peripheral Slot (Logical Slot 1)
CLK0
AD27
P2:A3
P1:E7
P2:A3
P2:E3
CLK
P1:D6
P1:B9
P1:A6
P1:E5
IDSEL
REQ#
GNT#
REQ4#
GNT4#
MIC-3043 User Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3.1: MIC-3811 and MIC-3812 slot numbering
3.5 Connector and Jumper Locations
The backplane provides connectors and jumpers for users to configure the
backplane for specific applications. Table 3-2 gives a brief description of
each connector on the backplane. Figures 3-3 to 3-6 illustrate the connec-
tor locations on the backplane.
Table 3.2: Backplane connector and jumper description
Function
MIC-3811
MIC-3812
AC/DC power connector
CPCI power connector
LED board connector
Fan module connectors
Power switch connector
V I/O voltage selections
I/O transition
CN3, CN17
CN3, CN17
CN1, CN2, CN5 CN1, CN2, CN5
CN14
CN14
CN8~CN13
CN15
CN8~CN13
CN15
T1~T3
T1~T3
P3, P5
P3, P4, P5
H.110 CT bus (slots 1~4,6)
Alarm Module Connector
M66EN
S1P4~S4P4, S6P4 N/A
CN16
JP8
CN16
JP8
64EN
JP1~JP6
CN18
JP1~JP6
CN18
Drive bay power
Power failure connector
CN4, CN6, CN7 CN4, CN6, CN7
21
Chapter3
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3.2: The connector and jumper locations on the front side (MIC-
3811 & MIC-3812)
Figure 3.3: The connector and jumper locations on the rear side. (MIC-3811)
Figure 3.4: The connector and jumper locations on the rear side. (MIC-3812)
MIC-3043 User Manual
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5.1 AC/DC Power Connector (CN3, CN17)
These connectors accept the separate AC/DC power input.
Note:
The power connector CN17 is not compatible with
ATX pin assignment. Do not use an ATX power
supply instead of DC power supply.
3.5.2 Power Switch
This connector provides power control over the plug-in power module. If
the CompactPCI chassis provides a 2-pin power switch cord, connect this
cord to the CN15 connector to control the power by the power switch.
3.5.3 V I/O Voltage Selection
This jumper is used to select the V I/O voltage. The backplane allows
V I/O to be set to either 5 V or 3.3 V. Since the default is configured for
use with 5V CompactPCI boards (blue-keyed connectors), once the
jumper is set to 3.3 V, the CompactPCI keys must be changed to 3.3 V at
the same time (as yellow-keyed connectors).
Figure 3.5: V I/O voltage selection
23
Chapter3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5.4 Fan Module Connector
The FAN connectors provide +12 V power for fan operation and relay the
tachometer output from the fans.
Note:
The fan4 is reserved as factory default.
3.5.5 Alert indicators
The MIC-3043 series alarm module (MIC-3924L-A) provides two alert
signals to the chassis front panel, close to the HDD bay. The bottom sig-
nal is for fan failure; the upper signal is for system overheating (tempera-
ture above 50 ºC).
Note:
System temperature is detected by the alarm mod-
ule via the LM75 chip.
Figure 3.6: Location of alert indicators
3.6 Clock Routing Configuration
The backplane is configured to comply with the clock routing specified in
the CompactPCI Specification, PICMG 2.0, R3.0. This Specification
requires that each slot be independently clocked.
MIC-3043 User Manual
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2
A
Pin Assignments
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Pin Assignments
A.1 MIC-3812 and MIC-3811 System Slot P1 Connector
Table A.1: MIC-3812 and MIC-3811 system slot P1 connector
Pin
Z
A
B
C
D
E
F
25
24
23
22
21
20
19
18
17
GND
GND
GND
GND
GND
GND
GND
GND
GND
+5V
AD[1]
+3.3V
AD[7]
+3.3V
AD[12]
+3.3V
SERR#
+3.3V
REQ64# ENUM#
+3.3V
AD[0]
+5V
+5V
ACK64#
AD[2]
GND
GND
GND
GND
GND
GND
GND
GND
GND
+5V
AD[4]
GND
V(I/O)
AD[3]
+3.3V
AD[8]
V(I/O)
AD[14]
+3.3V
AD[6]
AD[5]
AD[9]
GND
M66EN C/BE[0]#
AD[11]
GND
PAR
AD[10]
AD[13]
C/BE[1]#
PERR#
AD[15]
GND
IPMB-
SCL
IPMB-
SDA
GND
16
15
12-14
11
10
9
GND
GND
DEVSEL#
+3.3V
GND
V(I/O)
STOP# LOCK#
GND
GND
FRAME# IRDY#
Key Area
GND
TRDY#
GND
GND
GND
GND
GND
GND
GND
AD[18]
AD[21]
C/BE[3]#
AD[26]
AD[30]
REQ0#
AD[17]
GND
AD[16]
+3.3V
AD[23]
V(I/O)
AD[28]
+3.3V
RST#
GND
AD[20]
GND
C/BE[2]#
AD[19]
AD[22]
AD[24]
AD[27]
AD[31]
GNT0#
GND
GND
GND
GND
GND
GND
GND
GND
8
GND
AD[25]
GND
7
AD[29]
GND
6
CLK0
GND
5
BRSVP RRSVP
1A5
1B5
4
GND
IPMB-
PWR
Healthy#
V(I/O)
INTP
INTS
GND
3
2
1
GND
GND
GND
INTA#
TCK
+5V
INTB#
+5V
INTC#
TMS
+5V
TDO
+12V
INTD#
TDI
GND
GND
GND
-12V
TRST#
+5V
= long pins
= short pins
= medium pins
#: Low activity
MIC-3043 User Manual
26
Download from Www.Somanuals.com. All Manuals Search And Download.
A.2 MIC-3812 and MIC-3811 System Slot P2 Connector
Table A.2: MIC-3812 and MIC-3811 System Slot P2 Connector
Pin
Z
A
B
C
D
E
F
22
21
20
19
18
GND
GND
GND
GND
GND
GA4
NC
GA3
GND
GND
GND
GA2
RSV
RSV
RSV
GA1
RSV
GND
RSV
DND
GA0
RSV
RSV
RSV
GND
GND
GND
GND
GND
NC
GND
BRSVP BRSVP BRSVP
2A18
BRSVP
2E18
2B18
2C18
17
16
15
GND
GND
GND
BRSVP
2A17
GND
PRST#
NC
GND
NC
NC
GND
GND
GND
BRSVP BRSVP
2A16
DEG#
FAL#
BRSVP
2E16
2B16
BRSVP
2A15
GND
NC
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AD[35]
AD[38]
AD[42]
AD[45]
AD[49]
AD[52]
AD[56]
AD[59]
AD[63]
C/BE[5]#
V(I/O)
AD[34]
GND
AD[33]
V(I/O)
AD[40]
V(I/O)
AD[47]
V(I/O)
AD[54]
V(I/O)
AD[61]
V(I/O)
GND
AD[37]
GND
AD[32]
AD[36]
AD[39]
AD[43]
AD[46]
AD[50]
AD[53]
AD[57]
AD[60]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AD[41]
GND
AD[44]
GND
AD[48]
GND
AD[51]
GND
8
AD[55]
GND
7
AD[58]
GND
6
AD[62]
GND
5
C/BE[4]# PAR64
GND C/BE[6]#
4
BRSVP C/BE[7]#
2B4
3
2
1
GND
GND
GND
CLK4
CLK2
CLK1
GND
CLK3
GND
GNT3# REQ4# GNT4#
SYSEN# GNT2# REQ3#
REQ1# GNT1# REQ2#
GND
GND
GND
= long pins
= short pins
= medium pins
#: Low activity
27
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.3 MIC-3812 and MIC-3811 System Slots P3 Connector
Table A.3: MIC-3812 and MIC-3811 System Slot P3 Connector
Pin
Z
A
B
C
D
E
F
19
18
17
16
15
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
8
7
6
5
4
3
2
1
= long pins
= short pins
= medium pins
#: Low activity
MIC-3043 User Manual
28
Download from Www.Somanuals.com. All Manuals Search And Download.
A.4 MIC-3812 and MIC-3811 System Slots P4 Connector
Table A.4: MIC-3812 and MIC-3811 System Slot P4 Connector
Pin
Z
A
B
C
D
E
F
25
24
23
22
21
20
19
18
17
16
15
12-14
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
Key Area
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
8
NC
7
NC
6
NC
5
NC
4
NC
3
NC
2
NC
1
NC
= long pins
= short pins
= medium pins
#: Low activity
29
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.5 MIC-3812 and MIC-3811 System Slots P5 Connector
Table A.5: MIC-3812 and MIC-3811 System Slot P5 Connector
Pin
Z
A
B
C
D
E
F
19
18
17
16
15
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
8
7
6
5
4
3
2
1
= long pins
= short pins
= medium pins
#: Low acitivity
MIC-3043 User Manual
30
Download from Www.Somanuals.com. All Manuals Search And Download.
A.6 MIC-3812 and MIC-3811 Peripheral Slot P1 Connector
Table A.6: MIC-3812 and MIC-3811 Peripheral Slot P1 Connector
Pin
Z
A
B
C
D
E
F
25
24
23
22
21
20
19
18
17
GND
GND
GND
GND
GND
GND
GND
GND
GND
+5V
AD[1]
+3.3V
AD[7]
+3.3V
AD[12]
+3.3V
SERR#
+3.3V
REQ64# ENUM#
+3.3V
AD[0]
+5V
+5V
ACK64#
AD[2]
GND
GND
GND
GND
GND
GND
GND
GND
GND
+5V
AD[4]
GND
V(I/O)
AD[3]
+3.3V
AD[8]
V(I/O)
AD[14]
+3.3V
AD[6]
AD[5]
AD[9]
GND
M66EN C/BE[0]#
AD[11]
GND
PAR
AD[10]
AD[13]
C/BE[1]#
PERR#
AD[15]
GND
IPMB-
SCL
IPMB-
SDA
GND
16
15
12-14
11
10
9
GND
GND
DEVSEL#
+3.3V
GND
V(I/O)
STOP# LOCK#
GND
GND
FRAME# IRDY#
Key Area
GND
TRDY#
GND
GND
GND
GND
GND
GND
GND
AD[18]
AD[21]
C/BE[3]#
AD[26]
AD[30]
REQ#
AD[17]
GND
AD[16]
+3.3V
AD[23]
V(I/O)
AD[28]
+3.3V
RST#
GND
AD[20]
GND
C/BE[2]#
AD[19]
AD[22]
AD[24]
AD[27]
AD[31]
GNT#
GND
GND
GND
GND
GND
GND
GND
IDSEL
GND
8
AD[25]
GND
7
AD[29]
GND
6
CLK
5
BRSVP RRSVP
GND
1A5
1B5
4
GND
IPMB-
PWR
Healthy
#
V(I/O)
INTP
INTS
GND
3
2
1
GND
GND
GND
INTA#
TCK
+5V
INTB#
+5V
INTC#
TMS
+5V
TDO
+12V
INTD#
TDI
GND
GND
GND
-12V
TRST#
+5V
= long pins
= short pins
= medium pins
31
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.7 MIC-3812 and MIC-3811 Peripheral Slot P2 Connector
Table A.7: MIC-3812 and MIC-3811 System Slot P2 Connector
Pin
Z
A
B
C
D
E
F
22
21
20
19
18
GND
GND
GND
GND
GND
GA4
RSV
RSV
RSV
GA3
RSV
RSV
RSV
GA2
RSV
RSV
RSV
GA1
RSV
GND
RSV
GND
GA0
RSV
RSV
RSV
GND
GND
GND
GND
GND
BRSVP BRSVP BRSVP
2A18
BRSVP
2E18
2B18
2C18
17
16
15
GND
GND
GND
BRSVP
2A17
GND
RSV
RSV
GND
RSV
RSV
GND
GND
GND
BRSVP BRSVP
2A16
RSV
RSV
BRSVP
2E16
2B16
BRSVP
2A15
GND
BRSV
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AD[35]
AD[38]
AD[42]
AD[45]
AD[49]
AD[52]
AD[56]
AD[59]
AD[63]
C/BE[5]#
V(I/O)
AD[34]
GND
AD[33]
V(I/O)
AD[40]
V(I/O)
AD[47]
V(I/O)
AD[54]
V(I/O)
AD[61]
V(I/O)
GND
AD[37]
GND
AD[32]
AD[36]
AD[39]
AD[43]
AD[46]
AD[50]
AD[53]
AD[57]
AD[60]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AD[41]
GND
AD[44]
GND
AD[48]
GND
AD[51]
GND
8
AD[55]
GND
7
AD[58]
GND
6
AD[62]
GND
5
C/BE[4]# PAR64
4
BRSVP C/BE[7]#
2B4
GND
C/BE[6]#
3
2
1
GND
GND
GND
RSV
RSV
RSV
GND
RSV
GND
RSV
UNC
RSV
RSV
RSV
RSV
RSV
RSV
RSV
GND
GND
GND
= long pins
= short pins
= medium pins
Note: GA[4...0] shall be used for geographic addressing on the backplane
MIC-3043 User Manual
32
Download from Www.Somanuals.com. All Manuals Search And Download.
A.8 MIC-3812 and MIC-3811 Peripheral Slot P3 Connector
Table A.8: MIC-3812 and MIC-3811 Peripheral System Slot P3 Connector
Pin
Z
A
B
C
D
E
F
19
18
17
16
15
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
8
7
6
5
4
3
2
1
= long pins
= short pins
= medium pins
#: Low activity
33
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.9 MIC-3812 Peripheral Slot P4 Connector
Table A.9: MIC-3812 Peripheral System Slot P4 Connector
Pin
Z
A
B
C
D
E
F
25
24
23
22
21
20
19
18
17
16
15
12-14
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
Key Area
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
8
NC
7
NC
6
NC
5
NC
4
NC
3
NC
2
NC
1
NC
= long pins
= short pins
= medium pins
#: Low activity
MIC-3043 User Manual
34
Download from Www.Somanuals.com. All Manuals Search And Download.
A.10 MIC-3811 Peripheral Slot P4 Connector
Table A.10: MIC-3811 Peripheral System Slot P4 Connector
Pin
Z
A
B
C
D
E
F
25
24
23
22
21
NC
NC
NC
NC
NC
SGA4
GA4
SGA3
GA3
SGA2
GA2
SGA1
GA1
-12V
RSV
RSV
SGA0
GA0
GND
GND
GND
GND
GND
+12V
#CT_RT #CT_EN
CT_MC
RSV
#PF_S0
RSV
RSV
RSV
-SEL_Vbat #PF_S1
SELV-
batRtn
20
19
18
17
16
15
12-14
11
10
9
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
VRG
NC
NC
VRGRtn
NC
NC
NC
NC
NC
-Vbat
NC
VbatRtn
Key Area
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
CT_D29 CT_D30 CT_D31
CT_D27 +3.3V CT_D28
VIO
+5V
#CT_FA
#CT_FB
#FR_CP
CT_C8A
CT_C8B
CT_N1
CT_N2
SCLK
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
CT_D24 CT_D25 CT_D26
CT_D21 CT_D22 CT_D23
GND
+5V
8
7
CT_D19
+5V
CT_D20
GND
GND
+3.3V
+3.3V
GND
CT_D7
CT_D2
6
CT_D16 CT_D17 CT_D18
CT_D13 CT_D14 CT_D15
5
4
CT_D11
CT_D8
CT_D4
CT_D0
+5V
CT_D12
3
CT_D9 CT_D10
SCLK
2
CT_D5
+3.3V
CT_D6
CT_D1
GND
1
CT_D3
= long pins
= short pins
= medium pins
#: Low acitivity
35
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.11 MIC-3811 Peripheral Slot P5 Connector
Table A.11: MIC-3811 Peripheral Slot P5 Connector
Pin
Z
A
B
C
D
E
F
22
21
20
19
18
17
16
15
14
13
12
11
10
9
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
T1
R1
T2
T9
R9
T17
R17
T18
R18
T19
R19
T20
R20
T21
R21
T22
R22
T23
R23
T24
R24
IN/C
IN/C
T25
R25
T26
R26
T27
R27
T28
R28
T29
R29
T30
R30
T31
R31
T32
R32
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
GND-IN/C
T10
R10
T11
R11
T12
R12
T13
R13
T14
R14
T15
R15
T16
R16
IN/C
IN/C
Uo1
Ui1
R2
T3
R3
T4
R4
T5
R4
T6
R6
T7
R7
T8
8
7
R8
IN/C
IN/C
Uo0
Ui0
Uo2
Ui2
6
5
4
GND_FT GND_FT GND_FT GND-IN/C
3
Uo4
Ui4
Uo5
Ui5
Uo6
Ui6
GND-IN/C
GND-IN/C
GND-IN/C
2
Uo3
Ui3
1
+5V_FT
+12V_FT
-12V_FT
= long pins
= short pins
= medium pins
MIC-3043 User Manual
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A.12 MIC-3812 Peripheral Slot P5 Connector
Table A.12: MIC-3812 Peripheral Slot P5 Connector
Pin
Z
A
B
C
D
E
F
22
21
20
19
18
17
16
15
14
13
12
11
10
9
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
8
7
6
5
4
3
2
1
= long pins
= short pins
= medium pins
#: Low activity
37
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.13 Fan Module Connectors
Table A.13: Fan Module Connectors
Pin
Assignment
1
2
3
+12V
GND
Fan speed
A.14 LED Board Connector
Table A.14: LED Board Connector
Pin
Assignment
1
2
3
4
5
6
7
8
+3.3V
N/C
+5V
N/C
+12V
GND
GND
N/C
MIC-3043 User Manual
38
Download from Www.Somanuals.com. All Manuals Search And Download.
A.15 MIC-3812 & MIC-3812 Alarm Board Interface Connector
Table A.15: MIC-3812 & MIC-3812 Alarm Board Interface Connector
Pin
Signal
Pin
Signal
1
2
VCC
VCC
14
15
16
17
18
19
20
21
22
23
24
25
26
+12V
IPMB power
N/C
3
VCC
4
N/C
Fan Speed5
SMB-SDA
Fan Speed 6
SMB-SCL
IPMB-SCL
PS_ON
5
VCC
6
VCC3
7
Fan Speed1
N/C
8
9
Fan Speed2
-12V
10
11
12
13
IPMB-SDA
N/C
Fan Speed3
N/C
GND
Fan Speed4
GND
39
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.16 cPCI Power Connector (CN1,CN2, and CN5)
Table A.16: cPCI Power Connector (CN1,CN2, and CN5)
Pin
Signal
Pin
Signal
1
2
+5V
+5V
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
RSV
EN#
3
+5V
GA1
4
+5V
+5VADJ
5
GND
GND
GND
GND
GND
GND
GND
GND
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
GND
+5VSENSE
GA2
6
7
+3.3VADJ
+3.3VSENSE
SRTN
8
9
10
11
12
13
14
15
16
17
18
19
+5VSHARE
+12VSENSE
IPMBSCL
DEG#
INH#
IPMBSDA
+3.3VSHARE
FAL#
IPMBPWR
+12VSHARE
MIC-3043 User Manual
40
Download from Www.Somanuals.com. All Manuals Search And Download.
A.17 AC/DC Power Connector (CN3)
Table A.17: AC/DC Power Connector (CN3)
Pin
1
Signal
ACL/-DC PSU2
ACL/-DC PSU2
NC
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Signal
ACL/-DC PSU2
ACL/-DC PSU2
NC
2
3
4
ACN/+DC PSU2
ACN/+DC PSU2
NC
ACN/+DC PSU2
ACN/+DC PSU2
NC
5
6
7
ACL/-DC PSU1
ACL/-DC PSU1
NC
ACL/-DC PSU1
ACL/-DC PSU1
NC
8
9
10
11
12
ACN/+DC PSU1
ACN/+DC PSU1
NC
ACN/+DC PSU1
ACN/+DC PSU1
NC
41
AppendixA
Download from Www.Somanuals.com. All Manuals Search And Download.
A.18 AC/DC Power Connector (CN17)
Table A.18: AC/DC Power Connector (CN17
)
Pin
Assignment
1
2
3
4
5
6
ACL/-DC PSU3
ACL/-DC PSU3
NC
NC
ACN/+DC PSU3
ACN/+DC PSU3
A.19 Enable Power Switch Connector (CN15)
Table A.19: Enable Power Switch Connector (CN15)
Pin
Assignment
1
2
EN+
GND
MIC-3043 User Manual
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
B
Ordering Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Ordering Information
• MIC-3043A: A 4U-high CompactPCI enclosure with removable IDE
device bay, hot swappable cooling fan modules, and a 6-slot backplane
that provides H.110 CT bus support (MIC-3811). Power supply is not
inlcuded.
• MIC-3043A-B: A 4U-high CompactPCI enclosure with removable
IDE device bay, hot-swappable cooling fan modules, 1+1
(250W+250W) redundant CPCI power supply, and a 6-slot backplane
that provides H.110 CT bus support (MIC-3811).
• MIC-3043B: A 4U-high CompactPCI enclosure with removable IDE
device bay, hot-swappable cooling fan modules, and a 6-slot backplane
(MIC-3812) that doesn't support H.110 CT bus (MIC-3812). Power
supply not included.
• MIC-3043B-B: A 4U-high CompactPCI enclosure with removable
IDE device bay, hot-swappable cooling fan modules, 1+1
(250W+250W) redundant cPCI power supply, and a 6-slot backplane
(MIC-3812) that doesn't support H.110 CT bus.
• MIC-3043C: 4U-high CompactPCI™ enclosure with 6-slot backplane
(MIC-3811) that supports H.110 CT bus, hot-swappable SCSI device
bay, hot-swappable cooling fan modules. Power supply not included.
• MIC-3043C-B: 4U-high CompactPCI enclosure with hot-swappable
SCSI device bay, hot-swappable cooling fan modules, 1+1
(250W+250W) redundant cPCI power supply, and a 6-slot backplane
(MIC-3811) that supports H.110 CT bus.
• MIC-3043D: A 4U-high CompactPCI enclosure with removable/Hot-
swappable SATA device bay, hot swappable cooling fan modules, and
a 6-slot backplane that provides H.110 CT bus support (MIC-3811).
Power supply is not included.
• MIC-3043D-B: A 4U-high CompactPCI enclosure with removable/
Hot-swappable SATA device bay, hot-swappable cooling fan modules,
1+1 (250W+250W) redundant CPCI power supply, and a 6-slot back-
plane that provides H.110 CT bus support (MIC-3811).
MIC-3043 User Manual
46
Download from Www.Somanuals.com. All Manuals Search And Download.
For the recommended 6U CompactPCI SBC, please refer to the table
below:
Table B.1: Recommended 6U CompactPCI SBC
Chassis
Master SBC
RIO
Alarm module
MIC-3043A
series
RIO-3309C-A,
RIO-3309S-A2
Default
Solution:
MIC-3924L-A
Upgrade
Solution:
MIC-3043B
series
RIO-3309C-A,
RIO-3309S-A2
MIC-3369C-Mx
MIC-3358A-Mx
MIC-3043C
series
RIO-3309S-A1
MIC-3924A-B
MIC-3043D
series
RIO-3309C-A,
RIO-3309S-A2
Default Alarm Module:
• MIC-3924L-A: Chassis management module without remote control
for general purpose chassis and single SBC applications.
Upgradeable Alarm Module
• MIC-3924A-B: Chassis management module with remote control for
general purpose chassis and for single SBC applications.
47
AppendixB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|