32
L32W961
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE O F CO NTENT
DIGITAL TELEVISION TRANSITION NOTICE .......................................1
FORYOUR SAFETY........................................................................................2
PRECAUTIONS AND REMINDERS ...........................................................3
IMPORTANT SAFETY INSTRUCTIONS ...................................................4
PACKAGE CONTENTS.................................................................................5
PREPARATION.................................................................................................6
ATTACHING THE BASE.........................................................................................................6
PREPARINGYOUR LCD HDTV FOR WALL MOUNTING ..........................................6
PERIPHERAL CONNECTION GUIDE ......................................................8
OPERATING INSTRUCTIONS....................................................................9
TO USE THE FRONT PANEL CONTROL.........................................................................9
TO USE THE REMOTE CONTROL.................................................................................. 10
VIEWING MODELS ILLUSTRATIONS ............................................................................ 11
CONNECTING EQUIPMENT........................................................................................... 13
TO USE THE MENUS ........................................................................................................... 19
CHANNEL MENU ................................................................................................................ 19
VIDEO MENU ........................................................................................................................ 19
AUDIO MENU....................................................................................................................... 20
FEATURE MENU.................................................................................................................... 20
VGA MENU............................................................................................................................. 22
TIPS........................................................................................................................................... 23
PRODUCT SPECIFICATION......................................................................24
BEFORE CALLING SERVICE......................................................................25
GLOSSARY......................................................................................................26
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITALTELEVISIO N TRANSITIO N NOTICE
This device contains a digital television tuner, so it should receive digital over the air TV programming,
with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June
12, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to
receive over the air digital programming, but should continue to work as before for other purposes (e.g.,
for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing
video games).
For more information,
call the FCC at 1-888-CALL-FCC (1-888-225-5322)
or see www.DTV.gov.
For information on the TV Converter program, and on government coupons that may be used toward
or call the NTIA at 1-888-DTV-2009
.
AVISO RELATIVO A LA TRANSICIÓ N A TELEVISIÓ N DIGITAL
Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación
digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia
de la televisión analógica en los Estados Unidos el 12 de junio de 2009. Ciertos receptores de televisión
antiguos, si dependen de una antena de TV, necesitarán un conversor de TV para recibir por el aire una
programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver
emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o
para utilizar sus videojuegos).
Para obtener más información,
llame FCC 1-888-CALL-FCC (1-888-225-5322)
o refiérase a www.DTV.gov.
Para toda información sobre el programa de conversores de TV, y acerca de los cupones del gobierno
o llame al NTIA al 1-888-DTV-2009
SYMBOL
SYMBOL DEFINITION
DANGERO US VO LTAGE: The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
SA 1965
INSTRUCTIO NS: The exclamation point within on
equilateral triangle to alert the user to the presence of
important operating and maintenance (servicing)
instruction in the literature accompanying the appliance.
SA 1966
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, Such as
vases, shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Batteries installed warning
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FO RYO UR SAFETY
Before operating the TV please read this manual thoroughly.This manual should be retained for future
reference.
FCC Class B Radio Frequency Interference Statem ent
WARNING:
(FO R FCC CERTIFIED MO DELS)
This equipment has been tested and found to comply with the limits for a Class B digital
NOTE:
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
4.
NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages
are present inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.
SAFETY: Lam p Disposal
Hg
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION,
CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIO NS AND REMINDERS
Place unit on even surfaces.
Unplug immediately if other
foreign materials are put
inside TV box or if the TV
fell down.
Do not cover or block
any vents and openings.
Inadequate ventilation
may shorten the life of
the display unit and cause
overheating.
Unplug immediately if is
malfunction like no picture,
no video/audio,smoke and
bad odor from TV.
Prohibit/Avoid opening TV
cabinet.
Avoid direct sunlight, dusty,
high humidity and smoky
areas
.
Don't throw any object
inside the TV box like
metals or other flammable
materials.
Call service personnel to
clean the internal part of
the TV once a year.
Remember to unplug the
AC cord from the AC outlet
before cleaning. Do not use
liquid cleaners or aerosol
cleaners to clean the display.
Do not place the display
near water, such as bathtub,
washbasin, kitchen sink
Don't place the TV in
confined spaces or in a box
when using it.
Make sure to unplug the
unit when not in use for a
long period of time (days).
laundry tub, swimming pool
or in a damp basement.
Notice for Remote Controller
Avoid Dropping
Avoid Liquids
Avoid Aerosol Cleaners
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPO RTANT SAFETY INSTRUCTIO NS
Read before operating equipm ent
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug.A polarized plug has two
blades with one wider than the other.A grounding type plug has two blades and third grounding
prong.The wide blade or third prong is provided for your safety.When the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. The TV should be operated only from the type of power source indicated on the label. If you are not
sure of the type of power supplied to your home, consult your dealer or local power company.
16. Class I Protective Earthing Connection – "The Class I apparatus shall be connected to a mains socket
outlet with a protective earthing connection."
17. Disconnect Device - Mains Plug or Appliance Coupler – "The mains plug or appliance coupler is
used as the disconnect device, the disconnect device shall remain readily operable."
18. Disconnect Device - An all-pole MAINS SWITCH – "An all-pole MAINS SWITCH is used as the
disconnect device, the switch shall remain readily operable."
19. Service Instructions – "CAUTION – These servicing instructions are for use by qualified service
personnel only.To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so."
20. Wall Mount Bracket Wording – "For use only with UL Listed Wall Mount Bracket with minimum
weight/load: Please see page.24"
21. Information about the DTV transition –after June 12,2009, a television receiver with only an analog
broadcast tuner will require a converter box to receive full power over-the- air broadcasts with an
antenna because of the Nation's transition to digital broadcasting.Analog-only TVs should continue
to work as before to receiver low power, Class A or translator television stations and with cable
and satellite TV services, gaming consoles,VCRs, DVD players, and similar products. For more
information about the DTV transition is available from http://www.DTV.gov or 1-888-CALL-FCC,
4
Download from Www.Somanuals.com. All Manuals Search And Download.
digital-to-analog converter boxes.
CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a
converter box after June 12,2009,to receive over-the-air broadcasts with an antenna because of the
Nation's transition to digital broadcasting.Analog-only TVs should continue to work as before with
cable and satellite TV services, gaming consoles,VCRs, DVD players, and similar products, For more
information, call the Federal Communications Commission at 1-888-225-5322(TTY:1-888-835-5322)
or visit the Commission's digital television website at:www.DTV.gov.
22. Tilt/Stability – All televisions must comply with recommended international global safety standards
for tilt and stability properties of its cabinets design.
Do not compromise these design standards by applying excessive pull force to the front, or top,
of the cabinet, which could ultimately overturn the product
ƕ
Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top
of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.
ƕ
23. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
24. Power Lines – An outdoor antenna should be located away from power lines.
25. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide some protection against voltage surges and built
up static charges. Section 810 of the National Electric Code,ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of the mats and supporting structure grounding of the
lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antennadischarge
unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure
below.
ANTENNA
GROUND CLAMP
ANTENNADISCHARGE UNIT
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMPS
GROUNDING CONDUCTORS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the
CATV system installer:This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the 6 English grounding system of the building, as close
to the point of cable entry as practical. Please, make sure to connect the power plug to the wall
outlet socket after connecting the TV to the adapter!
26. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as
vases, shall be placed on the apparatus.
PACKAGE CO NTENTS
AOC L32W961 TV unit
Remote Control
Two (AAA) Batteries for the Remote Control
Base
Four screws (to attach the Base to the stand)
Power Cord
User Manual
ƕ
ƕ
ƕ
ƕ
ƕ
ƕ
ƕ
ƕ
Quick Setup Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIO N
IMPO RTANT: Do not apply pressure to the screen display area which may compromise the
integrity of the display. The manufacturer’s warranty does not cover user abuse or improper
installations.
ATTACHING THE BASE
IMPO RTANT:The Base of the HDTV must be assembled prior to usage.
1. Place TV unit face down on a soft and flat surface (blanket,
foam, cloth, etc.) to prevent any damage to the HDTV.
2. Carefully align and insert the Base to the stand.
3. Insert the screws to the bottom of the base and tighten the
base to the stand.
PREPARING YO UR LCD HDTV FO R WALL
MO UNTING
We suggest that you keep your TV at least 2.56 inches (65 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need to remove the base.
For your safety, please use only with UL listed wall mount bracket with minimum weight of the
TV without stand. (Please see page.24.)
To attach a wall mount bracket to your TV:
1 Remove the screws holding your TV to the stand.
2 Pull up the stand base from the hinge to remove the stand base from your TV.
3 Secure the wall mount bracket to the back of your TV using four M6 screws, as indicated
in the illustration.
200 mm
200 mm
NOTE
f 200mmx200mm wall mount bracket & M6 screws are not included.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
3. Rem ote control:
Remove the cover of the battery
compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
1. Install the base stand; place the TV
on a solid surface.
Min
1 m
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water.The equipment shall not
be exposed to dripping or splashing.
4. Power :
Insert the power cord in the wall socket
with AC power supply.You can see LED
states at the front panel. If the LED color
Blue
is
, means the TV set is power on. If
the LED color is Red, which means this TV
set is in standby state.
2. Connect the antenna cable or CATV cable
to the aerial socket ANT IN 75 at the
back of the TV set.
:
5. Turn the TV on:
Press the POWER key on the Remote
control or the side panel control knobs.
The TV will be turned on in a minute with
display on the screen.
Power Key
SOURCE
MUTE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PERIPHERAL CO NNECTIO N GUIDE
AC POWER
3
1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector.The white color band on the rear of the TV
indicates this connection.
2. PC IN – Connect the video and audio cables from a computer here.
3. AV IN (AV/S-VIDEO ) – Connect the primary source for composite video devices, such as
aVCR or video game. Use the white and red connectors to connect the external audio from
the same source.The signal being carried by the S-Video cable and connector, if connected,
will take priority over the Video RCA connector (yellow connector).
4. CO MPO NENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs.
5. ANTENNA/CABLE DIGITAL/ANALO G – Connect to an antenna or digital cable (out-
of-the-wall, not from Cable Box) for Digital TV.*
6. SPDIF (O ptical Digital Audio O ut) – When a digital audio signal is associated with the
input selected for viewing, the digital audio will be available on this SPDIF connection to
your home theater system.
Once your equipment is connected, use the following procedure to view the input signal:
Press the source button on the remote controller to select the relevant source to view. (ex: Press
COMP button to select “Component” if you have connected a video recorder to Component socket.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
O PERATING INSTRUCTIO NS
TO USE THE FRO NT PANEL CO NTRO L
1
2
3
4
5
6
7
1
VOL +
VO L +: Press to increase the sound volume level.
VO L - : Press to decrease the sound volume level.
2. VOL -
3. CH
4. CH
CH +: Press to select the next higher Program number.
CH - : Press to select the next lower Program number.
Menu key: Press to open or exit the OSD (on-screen display) menu.
Source key: Press to select the input source.
Ÿ
ź
5. MENU
6. INPUT
Power key: Press to turn on / off (standby) the TV set. (Press to turn on
Blue
color and
7.
TV after the power on status, LED had changed to the
stopped flashing.)
i
POWER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TO USE THE REMOTE CO NTRO L
CC
POW ER
Press repeatedly to change the
closed caption type as CC Off/
CC On/CC On With Mute.
W IDE
Press to choose the display
aspect as:Auto, Normal, Zoom,
Wide, or Cinema mode.
Press to turn ON/OFF (standby)
the TV. (Note: 1.TV is never
completely powered off unless
physically unplugged. 2. Press
to turn on TV after the power
on status, LED had changed
SOURCE
MUTE
to the Blue color and stopped
flashing.)
MTS/SAP
SO URCE
Press to activate the NTSC TV
sounds, such as: Stereo, SAP or
Mono tone, and languages of
DTV.
Press repeatedly to choose the
various input sources.
MUTE
Switch the sound ON/OFF.
AUDIO ADJ
0 ~ 9 /- num ber
Press to choose Standard,
Movies, News, or Custom.
Press to enter TV channel
number to select channel (Press
‘-’ to choose the sub-channel).
VIDEO ADJ
Press to choose the Picture
Mode fromVivid, Standard, PWR,
Theater, Sport, or Custom.
DISPLAY
MENU/EXIT
Press to display the previous
channel
SLEEP
VOL
CH
DISPLAY
Press to set the preset time to
switch the TV to standby mode
automatically (off/5 min/10
min/15 min/30 min/60 min/90
min/120 min/180 min /240 min).
Press to show the information
about the input source,TV
channel, display resolution and
current time.
MENU/EXIT
Press to open or close menu.
TV
Press to choose ATSC/NTSC
TV source mode.
FAV
ADD FAV
CC
WIDE
Navigation Ring
Press to adjust or confirm the
various function items on the
menu
MTS/SAP AUDIO
ADJ
VIDEO
ADJ
SLEEP
CO MP
Press to choose Component
source mode.
TV
COMP
VIDEO HDMI/PC
VO L+ / VO L-
Press + or - to adjust the
volume.
VIDEO
Press to choose Composite
source mode.
CH+ / CH-
Press + or - to browse through
the TV channels.
HDMI/PC
Press repeatedly to choose
HDMI or VGA source mode.
FAV
Press to display the Favorite
Channel List.
ADD FAV
Press to add channel to Favorite
List
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW ING MO DELS ILLUSTRATIO NS
Norm al Mode
The original content would be at the center of the screen.
16:9 Content
4:3 Content
W ide Mode
The original content in this mode has to fill the entire screen of the display.
16:9 Content
4:3 Content
ZO O M Mode
For those wide format images which are originally programmed into 4:3 frames with black
bars around, this mode would stretch the image in both width and height for full display with
active data.
Same image in ZOOM mode
CINEMA Mode
This mode is applied to view 2.35:1 format content on 16:9 displays. Cropping on both right
and left sides to keep the image ratio undistorted for users.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Antenna or Cable for your
VCR
CO NNECTING EQ UIPMENT
Coaxial (RF)
UsingYour Antenna or Digital Cable for
.
DTV
1. Turn off the HDTV andVCR.
2. Connect the “Output to TV”,“RF Out”
or “Antenna Out” connector on the rear
of your VCR to the ANTENNA/CABLE
DIGITAL/ANALOG connector at the rear
of the HDTV.
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or digital cable (out-of-
the-wall, not from the Cable Box) to the
ANTENNA/CABLE DIGITAL/ANALOG
connector.
3. Turn on the HDTV andVCR.
4. Select TV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the TV button on the Remote
Control.
3. Turn on the HDTV.
4. Select TV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the TV button on the Remote
Control.
NOTE
f Ifyouhaveanoff-airantennaorcableTV,
connect it to the “Antenna In” connector
on the rear of your VCR.
.
UsingYour Antenna or Cable for DTV
ConnectingYour HDTV Set-Top Box
Using HDMI
HDTV Set-Top Boxes that have a HDMI digital
interface should be connected to the HDMI
input of the LCD HDTV for optimal results.
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or cable (out-of-the-wall, not
from the Cable Box) to the ANTENNA/
CABLE DIGITAL/ANALOG connector at
the rear of the HDTV
3. Turn on the HDTV.
4. Select TV using the SOURCE button on
the remote, side of the HDTV, or pressing
the TV button on the Remote Control.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your HDTV Set-Top Box
(Best)
For HDTV Set-Top Boxes with DVI
1. Turn off the HDTV and HDTV Set-Top
Box.
2. Using a HDMI-DVI cable, connect the DVI
end to your HDTV Set-Top Box and the
HDMI end to the HDMI Input at the rear
of the HDTV.
3. Turn on the HDTV and HDTV Set-Top
Box.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the HDMI/PC button on the
Remote Control.
1. Turn off the HDTV and HDTV Set-Top
Box.
2. Connect a HDMI cable to the HDMI
output of your HDTV Set-Top Box and the
other end to the HDMI Input at the rear
of the HDTV.
NOTE
The HDMI input on the HDTV supports
High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission
between the video source and the digital
display for added security and protection.
f
3. Turn on the HDTV and HDTV Set-Top
Box.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the HDMI/PC button on the
Remote Control.
Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
f
f
NOTE
The DVI to HDMI connection provides
video only. Connection to an alternate
audio player is required for audio.
The HDMI input on the HDTV supports
High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission
between the video source and the digital
display for added security and protection.
f
Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
f
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Com ponent Video
ConnectingYour Basic Set-Top Box
Using Com posite Video
Connecting your HDTV Set-Top Box
(Better):
1. Turn off the HDTV and Set-Top Box.
1. Turn off the HDTV and HDTV Set-Top
Box.
2. Using an AV Cable, connect the Video
(yellow color) connector on your Set-Top
Box to the correspondingVideo (yellow
color) connector in the AV group at the
rear of the HDTV.
2. Connect the Pr (red color) connector
on your HDTV Set-Top Box to the
corresponding Pr (red color) connector in
the Component group.
3. Using the red and white connectors,
connect the cable to the audio output
connectors associated with the Video
output on your Set-Top Box and connect
the other end to the audio connectors
associated with the AV input at the rear of
the HDTV.
3. Connect the Pb (blue color) connector
on your HDTV Set-Top Box to the
corresponding Pb (blue color) connector
in the Component group.
4. Connect the Y (green color) connector
on your HDTV Set-Top Box to the
correspondingY (green color) connector
in the Component group.
4. Turn on the HDTV and Set-Top Box.
5. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
5. Using an audio cable (red and white
connectors), connect the cable to the
audio output connectors associated with
the Component output on your HDTV
Set-Top Box and connect the other end to
the audio connectors associated with the
Component.
6. Turn on the HDTV and HDTV Set-Top
Box.
7. Select Component using the SOURCE
button on the remote, side of the HDTV
or directly by pressing the COMP button
on the Remote Control.
NOTE
Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
f
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Coax (RF)
ConnectingYour DVD Player
Using HDMI
DVD players that have a digital interface
such as HDMI (High Definition Multimedia
Interface) should be connected to the HDMI
input of the LCD HDTV for optimal results.
Connecting your DVD Player (Best)
1. Turn off the HDTV and Set-Top Box.
2. Using a Coax (RF) cable, connect one end
to the TV OUT (RF) on your Set Top Box
and the other end to the TV input at the
rear of the HDTV.
3. Turn on the HDTV and Set-Top Box.
1. Turn off the HDTV and DVD player.
4. Select TV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the TV button on the Remote
Control.
2. Connect a HDMI cable to the HDMI
output of your DVD player and the other
end to the HDMI Input at the rear of the
HDTV.
NOTE
Refer to your Set Top Box user manual
for more information about selecting the
video or RF output of the product.
f
3. Turn on the HDTV and DVD player.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the HDMI/PC button on the
Remote Control.
For DVD Players with DVI:
1. Turn off the HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI
end to your DVD player and the HDMI
end to the HDMI Input at the rear of the
HDTV.
3. Turn on the HDTV and your DVD player.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the HDMI/PC button on the
Remote.
NOTE
Refer to your DVD player user manual for
more information about the video output
requirements of the product.
f
The DVI to HDMI connection provides
video only. Connection to an alternate
audio player is required for audio output.
f
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Com ponent Video
Using S-Video (AV)
Connecting your DVD Player (Better)
Connecting your DVD Player (Good):
1. Turn off the HDTV and DVD player.
1. Turn off the HDTV and DVD player.
2. Connect the Pr (red color) connector on
your DVD player to the corresponding Pr
(red color) connector in the Component
at the rear of the HDTV.
2. Connect the S-Video jack on the rear of
your DVD player to the S-Video jack in the
AV group on the rear of the HDTV.
3. Connect an audio cable (white and
red connectors) to the audio output
connectors associated with the S-Video
output on your DVD player and connect
the other end to the audio connectors
associated with the AV input on the rear of
the HDTV.
3. Connect the Pb (blue color) connector on
your DVD player to the corresponding Pb
(blue color) connector in the Component
group at the rear of the HDTV.
4. Connect the Y (green color) connector on
your DVD player to the correspondingY
(green color) connector in the Component
group at the rear of the HDTV.
4. Turn on the HDTV and DVD player.
5. Select AV using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the VIDEO button on the
Remote Control.
5. Using an audio cable (red and white
connectors), connect the cable to the
audio output connectors associated with
the Component output on your DVD
player and connect the other end to the
audio connectors associated with the
Component input at the rear of the HDTV.
6. Turn on the HDTV and DVD player.
7. Select Component using the SOURCE
button on the remote, side of the HDTV
or directly by pressing the COMP button
on the Remote Control.
NOTE
Refer to your DVD player user manual for
more information about the video output
requirements of the product.
f
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Com posite (AV) Video
ConnectingYour VCR or Video Cam era
Connecting your DVD Player (Good)
1. Turn off the HDTV andVCR or Video
Camera.
1. Turn off the HDTV and DVD player.
2. Connect the Video (yellow color)
connector on your DVD player to the
Video (yellow color) connector in the AV
group.
2. Connect the S-Video jack on the rear of
your VCR or Video Camera to the S-Video
jack in the AV group on the rear of the
HDTV.
3. Connect the R (red color) and L (white
color) audio connectors on your DVD
player to the corresponding R (red color)
and L (white color) audio input connectors
in the AV group.
3. Connect an audio cable (white and red
connectors) cable to the audio output
connectors associated with the S-Video
output on your VCR or Video Camera
and connect the other end to the audio
connectors associated with the AV input
on the rear of the HDTV.
4. Turn on the HDTV and DVD Player.
5. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
4. Turn on the HDTV andVCR or Video
Camera.
5. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
NOTE
Refer to your VCR or Video Camera user
manual for more information about the
video output requirements of the product.
f
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
1. Turn off the HDTV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable
to the RGB output of your PC and the
other end to the VGA input at the rear of
the HDTV.
3. Connect the Audio Out on your computer
to the AUDIO input at the rear of the
HDTV.
4. Turn on the HDTV and PC.
5. Select VGA using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the HDMI/PC button on the
Remote.
NOTE
For the best picture quality when
connecting a computer throughVGA, set
your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card’s user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.
f
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FAV Channel Setting: Show the Favorite
Channel List. User can edit (add/delete) the
favorite channels.
TO USE THE MENUS
1. Press the MENU/EXIT button to display
or close the main menu
VIDEO MENU
2. Use the Navigation Ring to move around
to select, adjust or confirm an item in the
OSD (On Screen Display) menu.
The Video menu in most source modes shows
as below. It provides several video adjustment
items for user fine tuning the video display.
Only inVGA source mode, the Video menu
simply provides Picture Mode, Color Tem p,
Backlight,Aspect Ratio and Preset items.
Press the MENU/EXIT button to enter the
main OSD.Adjust the items including Video
m enu,Audio m enu, Feature m enu,
Channel m enu andVGA m enu. However,
some function items in the menus may only be
enabled in the particular source modes.
Video
Video
Vivid
Picture Mode
Brightness
Contrast
Sharpness
Color
42
41
Audio
CHANNEL MENU
Feature
Channel
VGA
The Channel menu in TV mode shows as
below.
+10
62
0
Tint
Color Temp
Cool
Exit
Channel
Cable
Video
Move
Select
Return
Tuning Band
Channel Strength
Auto CH Search
Add on CH Search
Channels List
Audio
Feature
Channel
VGA
1. Pict ure Mode: Adjust the best picture
appearance from selecting the preset value
of Vivid, Standard, PWR(Energy savings),
Theater, Sport, or Custom.
Channel Labels
FAV Channel Setting
2. Brightness: Video brightness adjustment,
the tuning range is 0 ~ 100.
Move
Select
Return
Exit
3. Contrast: Video contrast adjustment, the
tuning range is 0 ~ 100.
4. Sharpness: Video sharpness adjustment,
the tuning range is 0 ~ 100.
1. Tuning Band: Select TV source signal
from the Air (antenna) or Cable (CATV).
2. Channel Strength: Show the intensity of
5. Color : Video color chroma adjustment,
the tuning range is 0 ~ 100.
6. Tint : Video tint adjustment, the tuning
range is R50 ~ G50.
7. Color Tem p: Three color temperature
modes. (Normal / Warm / Cool)
8. Backlight: Backlight strength adjustment,
the tuning range is 0 ~ 30.
the received DTV signal.
3. Auto CH Search: Automatically scan
all NTSC / ATSC TV channels and then
store in the channel table. In channel scan
process, the OSD can display the number
of channels which had been found.
4. Add on CH search: Add channels which
are new found.
9. Aspect Ratio: Choose the display aspect:
Auto, Normal, Zoom, Wide, or Cinema
mode. (Auto:TV only)
5. Channels List: Show the channel List.
User can edit (add/delete) the channel
numbers.
10. Preset: Restore the default video settings.
6. Channel Labels: Show the NTSC / ATSC
TV channel label menu for user modifying
channel labels specifically.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Preset: Restore the default audio settings.
AUDIO MENU
The Audio menu in TV mode shows as below.
It provides audio adjustment for user to modify
the audio setting.Audio language setting is only
available with ATSC TV source, the option is
disable under other source modes.
FEATURE MENU
The Feature menu in TV mode shows as below.
This menu gives users the most flexibilities to
satisfy their generally demands.According to
the various requirements in different source
modes, certain features should be hidden
(disable) on the menu.The details footnotes
will be described clearly below.
Audio
Video
Movie
Sound Mode
Bass
30
30
0
Audio
Treble
Feature
Channel
VGA
Balance
Audio Source
SPDIF
Feature
English
Mono
RAW
On
Video
Menu Language
Time
Speaker
Audio
Advanced Video
Transparency
Password Setting
Parental Control
Closed Captions
Feature
Channel
VGA
Move
Select
Return
Exit
0
1. Sound Mode: Choose the sound mode:
Standard, Movie, News, or Custom.
Off
Exit
2. Bass: Bass tone adjustment, the tuning
range is 0 ~ 63. (The default state is
enabled)
Move
Select
Return
1. Menu Language: Select the menu display
language. (English / Français / Español)
3. Treble: Treble tone adjustment, the tuning
range is 0 ~ 63. (The default state is
enabled)
2. Tim e: Set current time.The sub-menu
includes Time Mode,Time Zone and
Daylight Savings.
4. Balance: Audio balance adjustment, the
tuning range is L50 ~ R50.
[Tim e Mode] – Choose from Auto or
Manual.
5. Audio Source: Select the audio source
from Mono, Stereo, or SAP. (This function
works in ATV only).
[Tim e Zone] – Set current time zone.
[Daylight Savings] – Set to On or Off.
6. Audio Language: Change the audio
language setting on ATSC TV programs.The
number of the supported audio languages
depends on the ATSC TV programs. (English
/ Français / Español)
Time Set
Video
Auto
HST
Off
Time Mode
Time Zone
Daylight Savings
Year
Audio
Feature
Channel
VGA
2007
Jan
7. SPDIF: Digital audio output format. Select
Month
from RAW and PCM.
1
Day
8. Speaker : Choose to turn on / off the TV
internal speaker.The digital audio output
signals and earphone output signals will not
be turned off even though the TV speaker
is off.The default setting is On.
4:32 PM
Time
Move
Select
Return
Exit
3. Advanced Video: Provide the Noise
Reduction,Adaptive Contrast, and DCR for
enhancing video quality.
9. AVL: Choose On or off to adjust volume
to be consistent across programs and
channels automatically.
[Noise Reduction] – Gives four NR
20
Download from Www.Somanuals.com. All Manuals Search And Download.
effect degrees, such as: Low, Mid, High and
Off.The default setting is Mid.
and then key in the correct password.
Note:This feature is only available in TV,
Composite and S-Video source modes.
(The default password is: 0 0 0 0.)
[Adaptive Contrast] – Choose On or
off to adjust the gamma after analyzing the
input signal automatically.
Enter Password
[DCR] – Dynamic Contrast Ratio (DCR)
auto adjusts the backlight of the screen.
[Preset] – Restore the default advanced
video option settings.
Parental Control
Video
4. Transparency: Adjust the transparency of
Off
Off
Button Lock
the on-screen menu from range 1 to 10.
Block Unrated TV
USA Parental Locks
Canadian Parental Locks
Open V-Chip
Audio
5. Password Setting: Change the 4-numeral
parental control password.Three steps are
required for changing the password: Enter
Old Password -> Enter New Password ->
Confirm New Password. Note:This item is
only available in TV, Composite and S-Video
Feature
Channel
VGA
Move
Select
Return
Exit
ό
source modes.The default password is
ύ
0 0 0 .
0
[Button Lock] – Select On or Off to
lock or unlock the control buttons on the
side panel of the TV.When this function
enables, the control buttons on your TV
will be locked and TV will be controlled by
remote control only.
Enter Old Password
Enter New Password
Confirm New Password
[Block Unrated TV] – When Block
Unrated TV is set to on, your TV will block
unrated program.
[USA Parental Locks] – Set the parental
control level by MPAA or TV Rating.
[Canadian Parental Locks] – Set the
parental control level by English Rating or
French Rating.
[O pen V-Chip] – OpenV-Chip is an
advancedV-Chip rating system for digital
channels that are received.
The rating table will be updated by
downloading the RRT5 data for blocking.
6. Parental Control: provide the parental
Control (V-chip) function setting. Before
entering the Parental Control sub-menu,
user has to key in the password first. Enter
the Parental Locks item, then the user can
modify the restricted table about MPAA or
TV Rating respectively.While exiting the
sub-menu, the parental control function is
working.The inhibitive channels or source
signals can be un-lock through pressing
the V-CHIP key on the remote control
7. Closed Captions : Select a closed caption
options. (Off / On / With Mute)
8. Analog Captions: Select an analog caption
options. (CC 1-4 / TEXT 1-4)
9. Digital Captions: Select a digital caption
options. (Service 1-6)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Digital Captions Setup: Provide
numerous options for setting the digital
closed caption style in the sub-menu.
13.Reset to Default: Restore all the default
settings.
VGA MENU
[Style] – Set to Automatic or Custom
mode. If Custom mode is selected, user can
modify the detail styles described below.The
setting result will be shown immediately on
the bottom of the sub-menu OSD. Note:
This feature is only available in Digital TV
(ATSC) mode.
This option only shows and is available inVGA
mode, which provides several items for the
VGA display fine tuning.
1. H-Position: Adjust the horizontal position
of the picture. (0-100)
[Size] – Digital closed caption font size,
which can be set as Automatic, Small,
Normal or Large.
2. V-Position: Adjust the vertical position of
the picture. (0-100)
3. Clock: Adjust picture clock to reduce
[Font] – Digital closed caption font style,
which can be chosen as Automatic, Default
or Font 1 ~ 7.
Vertical-Line noise. (0-100)
4. Phase: Adjust Picture Phase to reduce
Horizontal-Line noise. (0-100)
[Text Color] – Automatic / White / Red
/ Green / Blue /Yellow / Magenta / Cyan /
Black
5. Auto Adjust: Adjust the settings
automatically.
[Text O pacity] – Automatic / Solid /
Flashing / Transparent / Translucent
6. Preset: Restore the default VGA setting
values.
[Background Color] – Automatic /
Black / White/ Red / Green / Blue/Yellow /
Magenta / Cyan
[Background O pacity] – Automatic /
Solid / Flashing / Transparent / Translucent
[Edge Effect] – Automatic / None / Raised
/ Depressed / Uniform / Left Shadow / Right
Shadow
[Edge Color] – Automatic / Red / Green
/ Blue /Yellow / Magenta / Cyan / Black /
White.
11.Input Labels: User can edit the input
labels.
12.Com ponent Setting: This option only
shows and is available in component mode,
which provides fine tuning component
display.
[Phase] – Adjust Picture Phase to reduce
Horizontal-Line noise.The tuning range is
from 0 to 100.
[Preset] – Restore the default component
setting values.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Notices – Federal
TIPS
Com m unications Com m ission Notice
Care of the screen
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Do not rub or strike the screen with anything
hard as this may scratch, mar, or damage the
screen permanently.
Unplug the power cord before cleaning the
screen. Dust the TV by wiping the screen
and the cabinet with a soft, clean cloth. If the
screen requires additional cleaning, use a
clean, damp cloth. Do not use liquid cleaners
or aerosol cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound,
malfunctioning of your TV or even damage
to the TV, keep away your mobile telephone
from the TV.
Reorient or relocate the receiving
antenna.
z
z
z
End of life directives
Increase the separation between the
equipment and the TV.
We are paying a lot of attention to produce
environmental friendly in green focal areas.
Your new receiver contains materials, which
can be recycled and reused.
At the end of its life, specialized companies
can dismantle the discarded receiver to
concentrate the reusable materials and to
minimize the amount of materials to be
disposed of.
Connect the equipment into wall power
outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio or television technician for help.
z
Modifications –
The FCC requires the user to be notified that
any changes or modifications made to this
device that are not expressly approved by
our company may void the user’s authority to
operate the equipment.
Please ensure you dispose of your old
receiver according to local regulations.
Dolby License Notice and Tradem ark
Acknowledgem ent
Cables –
Connections to this device must be made with
shielded cables with metallic RF/EMI connector
hoods to maintain compliance with FCC Rules
and Regulations.
Manufactured under license from Dolby
Laboratories."Dolby" and the double-D
symbol are trademarks of Dolby Laboratories.
Canadian notice –
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis Canadian –
Cat apparel numerous de la classed B
respected toutes les exigencies du règlement
sur le materiel brouilleur du Canada.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO DUCT SPECIFICATIO N
NOTE
* This model complies with the specifications
listed below.
* Designs and specifications are subject to
change without notice.
Y: 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 300mv(rms)
* This model may not be compatible with
features and/or specifications that may be
added in the future.
* 32” LCD TV (31.5” viewable)Viewable
image size: 800mm diagonal
Supported resolutions:1080i, 720p, 480p, 480i
HDMITerm inals:
HDMI INPUT: Rear HDMI x2; Side HDMI x1
HDCP compliant
E-EDID compliant
Supported scan rates: 1080p, 1080i, 720p, 480p,
480i
Television System :
NTSC standard
ATSC standard (8-VSB, Clear-QAM)
VGA Term inals:
VGA INPUT:
Rear VGA (D-SUB 15 Pin) Input x1
E-EDID compliant
Supported scan rates:
640X480 /60Hz
800x600/60Hz
Channel Coverage:
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mild band (A - 8 through A - 1,A
through I )Super band (J through W)Hyper
band (AA through ZZ,AAA, BBB)Ultra band (65
through 94, 100 through 135)
1024X768 /60Hz
1360X768 /60Hz
Recommended: 1360X768 /60Hz
Audio INPUT: Headphone Mini-jack for stereo
(3.5Ø )
Power Source:
AC power supply: 100V~240V, 50/60 Hz
Power Consum ption
Audio Out: SPDIF / RCA Jack (R/L)
180 W
d
Environm entalTem perature: 5°C - 35°C
<1 W in standby mode (power cord plugged in
and power OFF)
Dim ensions:
Include Stand:
Audio Power
792.6mm(W) x 561.5mm(H) x 232.5mm(L)
10 W + 10 W, Internal Speaker
Weight:
Video/Audio Term inals:
12.3kg(With Stand)
11kg(w/o stand and base)
Rear AV x1: S-Video/Video/Audio Input
Side AV x1:Video/Audio Input
W all Mounting:
200 x 200mm
(Wall mount kit is not included)
S-VIDEO INPUT:
Y: 1V(p-p), 75 ohm, negative sync.
C: 0.286V(p-p) (burst signal), 75 ohm
Supplied Accessories:
1pcs Power cord
1pcs Remote control
(with two size AAA alkaline batteries)
1pcs User manual
VIDEO /AUDIO INPUT:
VIDEO: 1V(p-p), 75 ohm, negative sync.
AUDIO: 300mv(rms)
Com ponent INPUT:
Rear Component x2:
1pcs Setup Guide
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFO RE CALLING SERVICE
Please make these simple checks before calling service.These tips may save you time and money
since charges for receiver installation and adjustments of customer controls are not covered
under your warranty.
Symptoms
Items to Check and Actions to follow
“Ghost ” or double image
*This may be caused by obstruction to the antenna
due to high rise buildings or hills. Using a highly
directional antenna may improve the picture.
No power
No picture
*Check if the TV’s AC power cord is plugged into
the mains socket.
*Unplug the TV, wait for 60 seconds.Then reinsert
plug into the mains socket and turn on the TV
again.
*Check antenna connections at the rear of the TV
to see if it is properly connected to the TV.
*Possible broadcast station trouble.
Try another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions control. Some TEXT
modes could block the screen,
Good picture but no sound
*Increase the VOLUME.
*Check if the TV is muted; press the MUTE button
on the remote control.
Good sound but poor color
Poor picture
*Adjust the contrast, color and brightness settings.
*Poor picture quality may occur when an activated
S-VHS camera or camcorder is connected to
your TV and the other peripheral at the same
time. Switch off one of the peripherals.
Snowy picture and noise
Horizontal dotted line
*Check the antenna connection
*This may be caused by electrical interference (e.g.
hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
Television not responding to remote control
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the TV.
*You can still use the buttons at the front of your
TV.
*Select the TV mode to ensure your remote
control is set in the TV mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
GLO SSARY
HDTV
HDTV displays are technically defined as being capable of displaying a minimum of 720p
or 1080i active scan lines.
HDMI Inputs
High-Definition Multimedia Interface
Audio /Video Inputs
Located on the rear of the receiver, these connectors (RCA phono type plug) are
used for the input of audio and video signals. Designed for use withVCRs (or other
accessories) in order to receive higher picture resolution and offer sound connection
options.
Menu
An on-screen listing of features shown on the TV screen is made available for user
adjustments.
MPAA
Motion Picture Association of America
MultichannelTelevision sound (MTS)
The broadcasting standard, which allows stereo sounds to be transmitted with the TV
picture.
RF
Radio Frequency or modulated signal design used as the carrier for television broadcasts.
Second Audio Program (SAP)
Another or additional audio channel provided for in the Multichannel Television Sound
(MTS) broadcast standard.A monaural soundtrack included within the recorded or
video signal (usually containing a second language translation for the displayed program).
Sleep Tim er
You can set a time period for which the TV will be turn off automatically.
S-Video Input
You can connect your TV set to a high-resolution video source (such as Super VHS
video-cassette recorder, Laser Disc player and DVD Home Theater Set) in order to
provide maximum consumer viewing satisfaction.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|