|
7ZMMC
AMD AthlonTM/DuronTM Socket A Processor Motherboard
USER'S MANUAL
AMD AthlonTM/DuronTM Socket A Processor Motherboard
REV. 2.01 First Edition
R-201-01-010205
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7ZMMC
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011
EN55013
EN 55014
Limits and methods of measurement
of radio disturbance characteristics of
industrial, scientific and medical (ISM
high frequency equipment
EN 61000-3-2*
EN60555-2
Disturbances in supply systems caused
by household appliances and similar
electrical equipment “Harmonics”
Limits and methods of measurement
of radio disturbance characteristics of
broadcast receivers and associated
equipment
EN61000-3-3*
EN60555-3
Disturbances in supply systems caused
by household appliances and similar
electrical equipment “Voltage fluctuations”
Limits and methods of measurement
of radio disturbance characteristics of
household electrical appliances,
portable tools and similar electrical
apparatus
EN 50081-1
EN 50082-1
EN 55081-2
Generic emission standard Part 1:
Residual, commercial and light industry
Generic immunity standard Part 1:
Residual, commercial and light industry
EN 55015
EN 55020
EN 55022
Limits and methods of measurement
of radio disturbance characteristics of
fluorescent lamps and luminaries
Generic emission standard Part 2:
Industrial environment
Immunity from radio interference of
broadcast receivers and associated
equipment
EN 55082-2
ENV 55104
EN 50091- 2
Generic immunity standard Part 2:
Industrial environment
Limits and methods of measurement
of radio disturbance characteristics of
information technology equipment
Immunity requirements for household
appliances tools and similar apparatus
DIN VDE 0855
part 10
part 12
Cabled distribution systems; Equipment
for receiving and/or distribution from
sound and television signals
EMC requirements for uninterruptible
power systems (UPS)
CE marking
(EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065
EN 60335
Safety requirements for mains operated
electronic and related apparatus for
household and similar general use
EN 60950
Safety for information technology equipment
including electrical business equipment
Safety of household and similar
electrical appliances
EN 50091-1
General and Safety requirements for
uninterruptible power systems (UPS)
Manufacturer/Importer
Signature Rex Lin
:
Date : Jan. 15, 2001
Name
:
Rex Lin
(Stamp)
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Table Of Content
FEATURE SUMMARY........................................................................................................................................1
7ZMMC MOTHERBOARD LAYOUT...............................................................................................................2
CPU SPEED SETUP.............................................................................................................................................3
SW1: CPU SPEED SETUP ....................................................................................................................................3
CONNECTORS.....................................................................................................................................................4
ATX POWER........................................................................................................................................................4
COM A / VGA / LPT PORT.................................................................................................................................4
FLOPPY CONNECTOR ...........................................................................................................................................4
GAME & AUDIO PORT .........................................................................................................................................4
IDE1 (PRIMARY), IDE2 (SECONDARY) CONNECTOR ..........................................................................................5
J2: SYSEM FAN....................................................................................................................................................5
J3: CPU FAN.......................................................................................................................................................5
J7: AUX_IN........................................................................................................................................................5
J8 TEL: THE CONNECTOR IS FOR MODEM WITH INTERNAL VOICE CONNECTOR ...................................................6
J9: CD AUDIO LINE IN ........................................................................................................................................6
J12: WAKE ON LAN ...........................................................................................................................................6
J13: RING POWER ON (INTERNAL MODEM CARD WAKE UP)..............................................................................6
JP6: POWER FAN .................................................................................................................................................7
JP8 / LED1: STR LED CONNECTOR & DIMM LED..........................................................................................7
PS/2 KEYBOARD & PS/2 MOUSE PORT...............................................................................................................7
USB 1: REAR USB PORT ....................................................................................................................................7
USB 2: FRONT USB CONNECTOR .......................................................................................................................8
PANELAND JUMPER DEFINITION................................................................................................................9
BAT1: BATTERY..................................................................................................................................................9
J11: 2X11 PINS FRONT PANEL .............................................................................................................................9
J16 /J17/J18: CNR (PRIMARY OR SECONDARY) SELECT [OPTIONAL] (CNRꢀ COMMUNICATION AND
NETWORKING RISER) ........................................................................................................................................10
MEMORY INSTALLATION .............................................................................................................................12
BIOS SETUP........................................................................................................................................................13
THE MAIN MENU...............................................................................................................................................14
STANDARD CMOS SETUP .................................................................................................................................15
BIOS FEATURES SETUP.....................................................................................................................................17
CHIPSET FEATURES SETUP.................................................................................................................................18
POWER MANAGEMENT SETUP ...........................................................................................................................20
PNP/PCI CONFIGURATIONS ..............................................................................................................................22
LOAD BIOS DEFAULTS......................................................................................................................................23
LOAD SETUP DEFAULTS.....................................................................................................................................24
INTEGRATED PERIPHERALS................................................................................................................................25
HARDWARE MONITOR .......................................................................................................................................27
SET SUPERVISOR / USER PASSWORD..................................................................................................................28
IDE HDD AUTO DETECTION...........................................................................................................................29
SAVE & EXIT SETUP ..........................................................................................................................................30
EXIT WITHOUT SAVING .....................................................................................................................................31
APPENDIX: ACRONYMS.................................................................................................................................32
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Feature Summary
Form Factor
ꢀ
24.4 cm x 22.2 cm Micro ATX size form factor, 4 layers
PCB.
CPU
ꢀ
ꢀ
ꢀ
AMD AthlonTM/DuronTM (K7) Socket A Processor
256K/64K L2 cache on die
Supports 600MHz ~ 1,2 GHz
Chipset
Pro Savage KM133, consisting of:
ꢀ
VT8365 Memory/AGP/PCI Controller (PAC)
VT82C686B PCI Super-I/O Integrated Peripheral
Controller (PSIPC)
ꢀ
Clock
Generator
Memory
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ICS 9248BF-141
100/102/104/106/108/110/112/133 MHz system bus speeds
2 168-pin DIMM sockets
Supports PC-100/133 and VCM SDRAM
Supports up to 1.0GB DRAM
Supports only 3.3V SDRAM DIMM
VT82C686B
1 AGP slot supports 4X mode & AGP 2.0 compliant
3 PCI slots supports 33MHz & PCI 2.2 compliant
1 CNR (Communication and Networking Riser) slot
(Not support LAN)
I/O Control
Slots
On-Board IDE
ꢀ
ꢀ
ꢀ
2 IDE bus master (UDMA 33/ATA 66/ATA 100) IDE ports
for up to 4 ATAPI devices
Supports PIO mode 3, 4 (UDMA 33/ATA 66/ATA 100)
IDE & ATAPI CD-ROM
1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88M bytes
On-Board
Peripherals
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 parallel port supports Normal/EPP/ECP mode
1 serial port (COM A)
2 USB ports / 2 USB ports (optional)
CPU/System fan revolution detection
CPU/Power/System fan control
Hardware
Monitor
System voltage detection
CPU/System temperature detection
PS/2
ꢀ
PS/2 Keyboard interface and PS/2 Mouse interface
Connector
On-Board
VGA
On-Board
Sound
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Build S3 Savage4 (86C370) in VT8365
Support shared memory architecture
Creative CT5880 sound (Optional)
AC’97 CODEC
Line In / Line Out / Mic In / AUX In / CD In / TEL / SPDIF
(Optional) / Game Port / Four Speaker (Optional)
Licensed AMI BIOS, 2M bit flash ROM
Support Wake-On-LAN (WOL)
Support Internal / External Modem Ring On
Support USB KB/MS Wake up from S3-S5
Includes 3 fan power connectors
BIOS
Additional
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Poly fuse for keyboard over-current protection
Support STR (Suspend-To-RAM) function
1
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
7ZMMC Motherboard Layout
JP4
PS/2
J3
Socket A CPU
JP6
JP8
LED1
JP7
VT8365
Creative
CT5880
7ZMMC
AGP 1
SW1
BAT1
PCI1
JP3
J13
PCI2
J8
VT82C
686B
J12
J2
BIOS
PCI3
J16
J17
J18
CNR
J11
USB2
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
CPU Speed Setup
The system bus speed is selectable at 100MHz. The user can select the system bus speed by DIP switch SW1.
SW1: CPU Speed Setup
SW1:
FSB
O: ON, X: OFF
1
O
X
0
X
O
0
X
X
X
2
O
O
0
O
X
X
X
X
X
3
X
X
X
X
O
0
O
X
X
4
O
X
X
O
0
X
O
0
95
100
102
103
107
110
113
115
133
X
ꢁAMD CPU Heat Sink Installation:
Beware: Please check that the heat sink is in good contact with the CPU before you turn on your system.
The poor contact will cause over heat, and might cause damage to your processor.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
Connectors
ATX Power
Pin No.
3,5,7,13,
15-17
1,2,11
4,6,19,20
10
Definition
GND
10 20
3.3V
VCC
+12V
12
-12V
18
-5V
8
9
14
Power Good
5V SB stand by+5V
PS-ON(Soft On/Off)
11
1
COM A / VGA / LPT Port
LPT Port
COM A
VGA
Floppy Connector
FDD1
Red Line
Game & Audio Port
Game
Port
MIC In
Line Out 1
Line In/Line Out 2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
IDE1 (Primary), IDE2 (Secondary) Connector
IDE 2 IDE 1
Red Line
J2: Sysem Fan
1
Pin No. Definition
1
2
3
Control
+12V
SENSE
J3: CPU Fan
1
Pin No. Definition
1
2
3
Control
+12V
SENSE
J7: AUX_IN
1
Pin No. Definition
1
2
3
4
AUX-L
GND
GND
AUX-R
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
J8 TEL: The connector is for Modem with internal voice connector
1
Pin No. Definition
1
2
3
4
Signal-In
GND
GND
Signal-Out
J9: CD Audio Line In
1
Pin No. Definition
1
2
3
4
CD-L
GND
GND
CD-R
J12: Wake On LAN
1
Pin No. Definition
1
2
3
+5V SB
GND
Signal
J13: Ring Power On (Internal Modem Card Wake Up)
1
Pin No. Definition
1
2
Signal
GND
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
JP6: Power Fan
1
Pin No. Definition
1
2
3
Control
+12V
NC
JP8 / LED1: STR LED Connector & DIMM LED
STR LED Connector External.
1
+
DIMM LED
PS/2 Keyboard & PS/2 Mouse Port
PS/2 Mouse
PS/2
Mouse/Keyboard
Pin No. Definition
6
5
1
2
3
4
5
6
Data
NC
GND
3
4
2
1
VCC(+5V)
Clock
NC
PS/2 Keyboard
USB 1: Rear USB Port
Pin No. Definition
8
5 6 7
1
2
3
4
5
6
7
8
USB V0
USB D0-
USB D0+
GND
USB V1
USB D1-
USB D1+
GND
1 2 3
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
USB 2: Front USB Connector
Pin No. Definition
1
2
3
4
5
+5V
GND
USB D2-
NC
USB D2+
USB D3+
NC
10
9
2
1
6
7
8
9
USB D3-
GND
10
+5V
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Panel And Jumper Definition
BAT1: Battery
+
CAUTION
Danger of explosion if battery
☞
is incorrectly replaced.
Replace only with the same or
equivalent type recommended
by the manufacturer.
☞
Dispose of used batteries
according to the manufacturer’s
instructions.
☞
J11: 2x11 Pins Front Panel
GN
S P K
HD
RE
GD
1
1
1
1
PW
P−P−P+
GN (Green Switch)
GD (Green LED)
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode(−)
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
Pin 2: LED cathode(−)
SPK (Speaker Connector)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(−)
RE (Reset Switch)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
P+P−P−(Power LED)
Pin 2: LED cathode(−)
Pin 3: LED cathode(−)
Open: Normal Operation
Close: Power On/Off
PW (Soft Power Connector)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel and Jumper Definition
J16 /J17/J18: CNR (Primary or Secondary) Select [Optional]
(CNRꢀ Communication and Networking Riser)
1
J16
1
J17
J18
1
J16
1-2
2-3
J17
1-2
3-4
1-2
3-4
J18
Onboard AC97
CNR (Primary)
1-2
3-4
1-2
Onboard AC97 CNR 1-2
(Secondary)
[Optional]
JP3: Clear CMOS Function (Optional)
1
Pin No.
Definition
1-2 close Normal (Default)
2-3 close Clear CMOS
JP4: USB Device Wake up Selection
1
Pin No.
Definition
1-2 close Normal (Default)
2-3 close USB Device Wake up
(If you want to use “USB Dev Wakeup from S3~S5”
function, you have to set the BIOS setting “USB Dev
Wakeup from S3~S5” enabled, and the jumper “JP4”
enabled)
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item “POWER MANAGEMENT SETUP”,
then select “USB Dev Wakeup from S3~S5”.
Remember to save the setting by pressing "ESC" and
choose the “SAVE & EXIT SETUP” option.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
JP7: STR Function Enable
1
Pin No.
1-2 close
Definition
STR Enable
2-3 close Normal (Default)
JP9: BIOS Write Protect Function
1
Pin No.
Definition
1-2 close Write Protect Enable
2-3 close Write Protect Disable
(Default)
ꢀPlease set Jumper JP9 to “2-3 close”
to enabled BIOS write function when
you update new BIOS or new device.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Memory Installation
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory
type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only
fit in one direction due to the two notch. Memory size can vary between sockets.
Install memory in any combination table:
DIMM
168-pin SDRAM DIMM Modules
DIMM 1
DIMM 2
Supports 16 / 32 / 64 / 128 / 256 / 512 MB
Supports 16 / 32 / 64 / 128 / 256 / 512 MB
X 1 pcs
X 1 pcs
Total System Memory (Max 1.0GB)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic
system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup
information when the power is turned off.
ENTERING SETUP
Power ON the computer and press <Del> immediately will allow you to enter Setup. If the message disappears
before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or
pressing the "RESET" bottom on the system case. You may also restart by simultaneously press <Ctrl> − <Alt>−
<Del> keys.
CONTROL KEYS
<↑>
<↓>
Move to previous item
Move to next item
<←>
<→>
<Esc>
Move to the item in the left hand
Move to the item in the right hand
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu
and Option Page Setup Menu - Exit current page and return to Main Menu
<+/PgUp> Increase the numeric value or make changes
<-/PgDn>
<F1>
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page Setup Menu
<F2>
Reserved
<F3>
Reserved
<F4>
Reserved
<F5>
Restore the previous CMOS value from CMOS, only for Option Page Setup
Menu
<F6>
Load the default CMOS value from BIOS default table, only for Option Page
Setup Menu
<F7>
<F8>
<F9>
<F10>
Load the Setup Defaults
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
GETTING HELP
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for
the highlighted item. To exit the Help Window press <Esc>.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
The Main Menu
Once you enter AMI BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. The Main
Menu allows you to select from nine setup functions and two exit choices. Use arrow keys to select among the
items and press <Enter> to accept or enter the sub-menu.
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit
↑↓←→ : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults
F7: Load Setup Defaults
F10: Save & Exit
Time, Date, Hard Disk Type, …
Figure 1: Main Menu
• Standard CMOS Setup
This setup page includes all the items in standard compatible BIOS.
• BIOS Features Setup
This setup page includes all the items of AMI special enhanced features.
• Chipset Features Setup
This setup page includes all the items of chipset special features.
• Power Management Setup
This setup page includes all the items of Green function features.
• PnP/PCI Configurations
This setup page includes all the configurations of PCI & PnP ISA resources.
• Load BIOS Defaults
Bios Defaults indicates the value of the system parameter which the system would be in the safe
configuration.
• Load Setup Defaults
Setup Defaults indicates the value of the system parameter which the system would be in the most
appropriate configuration.
• Integrated Peripherals
This setup page includes all onboard peripherals.
• Hardware Monitor Setup
This setup page is auto detect fan and temperature status.
• Supervisor password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
• User password
Change, set, or disable password. It allows you to limit access to the system.
• IDE HDD auto detection
Automatically configure hard disk parameters.
• Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
• Exit Without Saving
Abandon all CMOS value changes and exit setup.
Standard CMOS Setup
The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no,
one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys
to select the value you want in each item.
AMIBIOS SETUP – STANDARD CMOS SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy) : Tue Jan 25, 2000
Time (hh/mm/ss) : 10:36:24
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A: 1.44 MB 3 ½
Floppy Drive B: Not Installed
Base Memory : 640 Kb
Other Memory: 384 Kb
Extended Memory: 30Mb
Total Memory: 31Mb
Boot Sector Virus Protection : Disabled
Month: Jan – Dec
Day: 01 – 31
ESC : Exit
↑↓ : Select Item
Year : 1990– 2099
PU/PD/+/– : Modify
(Shift)F2 : Color
Figure 2: Standard CMOS Setup
• Date
The date format is <Week> <Month> <Day>, <Year>.
Week
The week, from Sun to Sat, determined by the BIOS and is
display-only
Month
Day
The month, Jan. Through Dec.
The day, from 1 to 31 (or the maximum allowed in the month)
The year, from 1990 through 2099
Year
• Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time
clock. For example, 1 p.m. is 13:00:00.
• Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. There
are two types: auto type, and user definable type. User type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work properly
if you enter improper information for this category.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
If you select User Type, related information will be asked to enter to the following items. Enter the information
directly from the keyboard and press <Enter>. Such information should be provided in the documentation
form your hard disk vendor or the system manufacturer.
CYLS.
Number of cylinders
number of heads
write precomp
HEADS
PRECOMP
LANDZONE Landing zone
SECTORS number of sectors
If a hard disk has not been installed select NONE and press <Enter>.
• Floppy Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.
None
No floppy drive installed
360K, 5.25 in. 5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 5.25 in.
5.25 inch AT-type high-density drive; 1.2M byte
capacity (3.5 inch when 3 Mode is Enabled).
3.5 inch double-sided drive; 720K byte capacity
3.5 inch double-sided drive; 1.44M byte capacity.
3.5 inch double-sided drive; 2.88M byte capacity.
720K, 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
• Boot Sector Virus Protection
If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector
or partition table of the hard disk drive. The system will halt and the following error message will appear in the
mean time. You can run anti-virus program to locate the problem.
Enabled
Activate automatically when the system boots up causing a
warning message to appear when anything attempts to
access the boot sector or hard disk partition table
Disabled No warning message to appear when anything attempts to
access the boot sector or hard disk partition table. (Default
Value)
• Memory
The category is display-only which is determined by POST (Power On Self Test) of the
BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional)
memory installed in the system.
The value of the base memory is typically 512 K for systems with 512 K
memory installed on the motherboard, or 640 K for systems with 640 K or more
memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU's memory
address map.
Other Memory
This refers to the memory located in the 640 K to 1024 K address space. This is memory that can be
used for different applications.
DOS uses this area to load device drivers to keep as much base memory free for application
programs. Most use for this area is Shadow RAM
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
BIOS Features Setup
AMIBIOS SETUP – BIOS FEATURES SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
1st Boot Device
2nd Boot Device
3rd Boot Device
Floppy
CDROM
IDE-0
S.M.A.R.T. for Hard Disks
BootUp Num-Lock
Floppy Drive Seek
Password Check
Disabled
On
Disabled
Setup
ESC : Quit
: Select Item
↑↓→ ←
F1 : Help
PU/PD+/-/ : Modify
F5 :Old Values
(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
Figure 3: BIOS Features Setup
• 1st / 2nd / 3rd Boot Device
Floppy
Boot Device by Floppy.
Boot Device by ZIP A: / LS120.
ZIP A: / LS120
CDROM
Boot Device by CDROM.
Boot Device by SCSI.
SCSI
NETWORK
USB FDD
IDE-0~IDE-3
Disabled
Boot Device by NETWORK.
Boot Device by USB FDD.
Boot Device by IDE-0~IDE-3.
Boot Device by Disabled.
Boot Device by ATAPI ZIP C:.
ATAPI ZIP C:
• S.M.A.R.T. for Hard Disks
Enabled
Enable S.M.A.R.T. Hard for Disks.
Disabled Disable S.M.A.R.T. Hard for Disks. (Default Value)
• Boot Up Num-Lock
On
Off
Keypad is number keys. (Default Value)
Keypad is arrow keys.
• Floppy Drive Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks
while 720 , 1.2 and 1.44 are all 80 tracks.
Enabled
BIOS searches for floppy disk drive to determine if it is 40
or 80 tracks. Note that BIOS can not tell from 720, 1.2 or
1.44 drive type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by
track number. Note that there will not be any warning
message if the drive installed is 360. (Default Value)
• Password Check
Setup
Set Password Check to Setup. (Default Value)
Always
Set Password Check to Always.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Chipset Features Setup
AMIBIOS SETUP – CHIPSET FEATURES SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
Configure Timing by SPD
DRAM Frequency
Enabled
Auto
SDRAM CAS# Latency
Auto
AGP Mode
4X
AGP Comp. Driving
Manual AGP Comp. Driving
AGP Fast Write
AGP Aperture Size
ClkGen Spread Spectrum
USB Controller
Auto
CB
Disabled
64MB
Enabled
USB Port 0&1
Disabled
USB Legacy Support
ESC : Quit
F1 : Help
: Select Item
↑↓→ ←
PU/PD+/-/ : Modify
F5 :Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
Figure 4: Chipset Features Setup
• Configure Time by SPD
Disabled Disable Configure Time by SPD function.
Enabled Enable Configure Time by SPD function. (Default Value)
• DRAM Frequency
Auto
Set DRAM Frequency to Auto. (Default Value)
100MHz
133MHz
Set DRAM Frequency to 100MHz.
Set DRAM Frequency to 133MHz.
• SDRAM CAS# Latency
Auto
Detect SDRAM CAS# Latency by SPD. (Default Value)
2
3
For Fastest SDRAM DIMM module.
For Slower SDRAM DIMM module.
• AGP Mode
4X
1X
2X
Set AGP Mode to 4X. (Default Value)
Set AGP Mode to 1X.
Set AGP Mode to 2X.
• AGP Comp. Driving
Auto
Set AGP Comp. Driving to Auto. (Default Value)
Set AGP Comp. Driving to Manual.
Manual
If AGP Comp. Driving is Manual.
Manual AGP Comp.
00~FF
Driving:
• AGP Fast Write
Enabled
Enable AGP Fast Write function.
Disabled Disable this function. (Default Value)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
• AGP Aperture Size
4MB
Set AGP Aperture Size to 4MB.
8MB
Set AGP Aperture Size to 8 MB.
16MB
32MB
64MB
128MB
256MB
Set AGP Aperture Size to 16 MB.
Set AGP Aperture Size to 32 MB.
Set AGP Aperture Size to 64 MB. (Default Value)
Set AGP Aperture Size to 128 MB.
Set AGP Aperture Size to 256 MB.
• ClkGen Spread Spectrum
Disabled Disable ClkGen Spread Spectrum.
Enabled Enable ClkGen Spread Spectrum. (Default Value)
• USB Controller
All USB Port
Disabled
Set USB Controller to All USB Port.
Disable USB Controller.
USB Port 0&1
USB Port 2&3
Set USB Controller to USB Port 0&1. (Default Value)
Set USB Controller to USB Port 2&3.
• USB Legacy Support
Keyboard/FDD
Set USB Legacy Support Keyboard / Floppy.
KB/Mouse/FDD Set USB Legacy Support Keyboard / Mouse / Floppy.
Disabled
Disable USB Legacy Support Function. (Default Value)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Power Management Setup
AMIBIOS SETUP – POWER MANAGEMENT SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
ACPI Standby State
USB Dev Wakeup From S3~S5
Suspend Time Out (Minute)
Display Activity
S1/POS
Disabled
Disabled
Ignore
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
12
30
30
IRQ3
IRQ4
IRQ5
Monitor
Monitor
Ignore
IRQ7
IRQ9
Monitor
Ignore
IRQ10
IRQ11
Ignore
Ignore
IRQ13
IRQ14
Ignore
Monitor
IRQ15
Soft-Off by Power Button
Ignore
Instant-Off
System after AC Back
Resume On Ring/LAN
Resume On PME#
Resume On RTC Alarm
RTC Alarm Date
Last State
Enabled
Enabled
Disabled
15
ESC : Quit
F1 : Help
F5 :Old Values
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
↑↓→ ←: Select Item
PU/PD+/-/ : Modify
(Shift)F2:Color
Figure 5: Power Management Setup
• ACPI Standby State
S1/POS
S3/STR
Set ACPI Standby State to S1. (Default Value)
Set ACPI Standby State to S3.
• USB Dev Wakeup From S3~S5
Enabled
Enable USB Dev Wakeup from ACPI S3, S4 and S5 mode.
Disabled Disable USB Dev Wakeup from ACPI S3, S4 and S5 mode.
(Default Value)
• Suspend Time Out (Minute.)
Disabled Disable Suspend Time Out Function. (Default Value)
1
Enable Suspend Time Out after 1min.
Enable Suspend Time Out after 2min.
Enable Suspend Time Out after 4min.
Enable Suspend Time Out after 8min.
Enable Suspend Time Out after 10min.
Enable Suspend Time Out after 20min.
Enable Suspend Time Out after 30min.
Enable Suspend Time Out after 40min.
Enable Suspend Time Out after 50min.
Enable Suspend Time Out after 60min.
2
4
8
10
20
30
40
50
60
• Display Activity
Ignore
Ignore Display Activity. (Default Value)
Monitor
Monitor Display Activity.
• IRQ 3~IRQ15
Ignore
Ignore IRQ3 ~IRQ15.
Monitor IRQ3~IRQ15.
Monitor
• Soft-off by Power Button
Instant-off
Soft switch ON/OFF for POWER ON/OFF. (Default
value)
Suspend
Soft switch to enter Suspend Mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
• System after AC Back
Last State
System power on depends on the status before AC lost.
(Default Value)
Off
On
Always in Off state when AC back.
Always power on the system when AC back.
• Resume On Ring / LAN
Disabled
Enabled
Disable Resume On Ring / LAN.
Enable Resume On Ring / LAN. (Default Value)
• Resume On PME#
Disabled
Enabled
Disable Resume On PME#.
Enable Resume On PME#. (Default Value)
• Resume On RTC Alarm
You can set “Resume On RTC Alarm” item to enabled and key in Data/time to power on system.
Disabled
Enabled
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
If the default value is Enabled.
RTC Alarm Date:
RTC Alarm Hour:
RTC Alarm Minute:
RTC Alarm Second:
Every Day, 1~31
0~23
0~59
0~59
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
PNP/PCI Configurations
AMIBIOS SETUP – PNP / PCI CONFIGURATION
( C ) 1999 American Megatrends, Inc. All Rights Reserved
VGA Frame Buffer Size
16MB
VGA Boot from
IRQ 3
IRQ 4
IRQ 5
IRQ 7
PCI
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
IRQ 9
IRQ 10
IRQ 11
IRQ 14
IRQ 15
ESC: Quit
: Select Item
↑↓→ ←
F1 : Help
PU/PD+/-/ : Modify
F5 :Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
Figure 6: PNP/PCI Configuration
• VGA Frame Buffer Size
8MB
Set VGA Frame Buffer Size to 8MB.
16MB
32MB
Set VGA Frame Buffer Size to 16MB. (Default Value)
Set VGA Frame Buffer Size to 32MB.
• VGA Boot From
AGP
PCI
Primary Graphics Adapter From AGP.
Primary Graphics Adapter From PCI. (Default Value)
• IRQ (3, 4, 5, 7, 9, 10, 11, 14, 15)
ISA/ EISA
PCI /PnP
The resource is used by Legacy ISA device.
The resource is used by PCI/ PnP device. (Default
Value)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Load BIOS Defaults
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGU
LOAD BIOS DEFAULTS
TION
Load BIOS Defaults (Y/N)? N
SAVE & EXIT SETUP
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit ↑↓→← : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit
Load BIOS Default except Standard CMOS Setup
Figure 7: Load BIOS Defaults
• Load BIOS Defaults
BIOS defaults contain the most appropriate values of the system parameters that allow minimum system
performance.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Load Setup Defaults
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGU
LOAD BIOS DEFAULTS
Load SETUP Defaults (Y/N)? N
CTION
SAVE & EXIT SETUP
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit ↑↓→← : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit
Load Setup Default except Standard CMOS Setup
Figure 8: Load Setup Defaults
• Load Setup Defaults
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically
detects.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Integrated Peripherals
AMIBIOS SETUP – INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Auto
OnBoard Serial Port 1
OnBoard Parallel Port
Parallel Port Mode
Parallel Port DMA
Parallel Port IRQ
OnBoard IDE
OnBoard AC’97 Audio
OnBoard MC’97 Modem
Auto
Auto
EPP
N/A
Auto
Both
Auto
Auto
MPU-401
Disabled
MPU-401 I/O Address
330h-333h
ESC: Quit
: Select Item
↑↓→ ←
F1 : Help
F5 :Old Values
PU/PD+/-/ : Modify
(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
Figure 9: Integrated Peripherals
• Onboard FDC
Auto
Auto detect OnBoard Floppy disk controller. (Default
value)
Enabled
Enable OnBoard Floppy disk controller.
Disabled Disable OnBoard Floppy disk controller.
• On Board Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
(Default Value)
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Enable on Board Serial port 1 and address is 3F8.
Enable on Board Serial port 1 and address is 2F8.
Enable on Board Serial port 1 and address is 3E8.
Enable on Board Serial port 1 and address is 2E8.
Disable on Board Serial port 1.
• OnBoard Parallel port
378
278
3BC
Auto
Enable On Board LPT port and address to 378.
Enable On Board LPT port and address to 278.
Enable On Board LPT port and address to 3BC.
Set On Board LPT port to Auto. (Default Value)
Disabled Disable On Board LPT port.
• Parallel Port Mode
EPP
Using Parallel port as Enhanced Parallel Port. (Default
Value)
ECP
Using Parallel port as Extended Capabilities Port.
Normal Operation.
Normal
EPP+EC Using Parallel port as Enhanced Parallel Port & Extended
Capabilities Port.
P
• Parallel Port DMA
N/A
Auto
3
Disable this function. (Default Value)
Set Auto to parallel port mode DMA Channel.
Set Parallel Port DMA to 3.
1
Set Parallel Port DMA to 1.
0
Set Parallel Port DMA to 0.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
•
Parallel Port IRQ
7
Set Parallel Port IRQ to 7.
Auto
Set Auto to parallel Port IRQ DMA Channel. (Default
Value)
5
Set Parallel Port IRQ to 5.
• OnBoard IDE
Disabled
Both
Disable OnBoard IDE.
Set OnBoard IDE to Both. (Default Value)
Set OnBoard IDE to Primary.
Primary
Secondary Set OnBoard IDE to Secondary.
• OnBoard AC’97 Audio
Auto
Auto detect OnBoard AC’97 Audio. (Default Value)
Disabled Disable OnBoard AC’97 Audio.
• OnBoard MC’97 Modem
Auto
Auto detect OnBoard MC’97 Modem. (Default Value)
Disabled Disable OnBoard MC’97 Modem.
• MPU-401
Enabled
Enable MPU-401.
Disabled Disable MPU-401. (Default Value)
Ps. When Force Feedback joystick is used, MPU-401 needs to be Enable.
• MPU-401 I/O Address
330h-333h
Set MPU-401 I/O Address to 330h-333h. (Default
Value)
300h-303h
310h-313h
320h-323h
Set MPU-401 I/O Address to 300h-303h.
Set MPU-401 I/O Address to 310h-313h.
Set MPU-401 I/O Address to 320h-323h.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Hardware Monitor
AMIBIOS SETUP – HARDWARE MONITOR SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
CPU Temperature
47 C/116 F
°
°
System Temperature
CPU Fan Speed
System Fan Speed
Vcore
Vdd
Vcc3
32 C/89 F
7123 RPM
0 RPM
1.750 V
3.050 V
3.340 V
4.996 V
12.166 V
°
°
+5.000V
+12.000V
ESC: Quit
: Select Item
↑↓→ ←
F1 : Help
PU/PD+/-/ : Modify
F5 :Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 10: Hardware Monitor
•
•
•
•
CPU Temperature. (°C / °F)
Detect CPU Temperature automatically.
System Temperature. (°C / °F)
Detect System Temperature automatically.
CPU Fan Speed
Detect CPU Fan speed status automatically.
System Fan Speed
Detect System Fan speed status automatically.
• Voltage (V) Vcore / Vdd / Vcc3 / +5V / +12V
Detect system’s voltage status automatically.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Set Supervisor / User Password
When you select this function, the following message will appear at the center of the screen to assist you in
creating a password.
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
BIOS FEATURES SETUP
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGUR
ON
SAVE & EXIT SETUP
Enter new supervisor password:
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit ↑↓→← : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults
F7: Load Setup Defaults F10: Save & Exit
Chang /Set /Disabled Password
Figure 11: Password Setting
Type the password, up to six characters, and press <Enter>. You will be asked to confirm the password. Type the
password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message “PASSWORD
DISABLED” will appear to confirm the password being disabled. Once the password is disabled, the system will
boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords: a SUPERVISOR PASSWORD and a
USER PASSWORD. When disabled, anyone may access all BIOS Setup program function. When enabled, the
Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the
User password is required to access only basic items.
If you select “Always” at “Password Check” in BIOS Features Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select “Setup” at “Password Check” in BIOS Features Setup Menu, you will be prompted only when you
try to enter Setup.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
IDE HDD AUTO Detection
AMIBIOS SETUP – STANDARD CMOS SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy) : Tue Jan 25, 2000
Time (hh/mm/ss) : 10:36:24
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Pri Master : Not Installed
Pri Slave : Not Installed
Sec Master : Not Installed
Sec Slave : Not Installed
Floppy Drive A: 1.44 MB 3 ½
Floppy Drive B: Not Installed
Base Memory : 640 Kb
Other Memory: 384 Kb
Extended Memory: 31Mb
Total Memory: 32Mb
Boot Sector Virus Protection : Disabled
Month: Jan – Dec
Day: 01 – 31
ESC : Exit
↑↓ : Select Item
Year : 1990– 2099
PU/PD/+/– : Modify
(Shift)F2 : Color
Figure 12: IDE HDD Auto Detection
Type "Y" will accept the H.D.D. parameter reported by BIOS.
Type "N" will keep the old H.D.D. parameter setup. If the hard disk cylinder number is over 1024, then the user
can select LBA mode or LARGER mode for DOS partition larger than 528 MB.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Save & Exit Setup
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIG
LOAD BIOS DEFA
TION
SAVE to CMOS and EXIT(Y/N)? Y
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit ↑↓→← : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults
F7: Load Setup Defaults F10: Save & Exit
Save Data to CMOS & Exit Setup
Figure 13: Save & Exit Setup
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.
Type "N" will return to Setup Utility.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Exit Without Saving
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIG
LOAD BIOS DEFA
CTION
Quit without saving (Y/N) ? N
LOAD SETUP DEFAULTS
EXIT WITHOUT SAVING
ESC : Quit ↑↓→← : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit
Abandon all Datas & Exit Setup
Figure 14: Exit Without Saving
Type "Y" will quit the Setup Utility without saving to RTC CMOS.
Type "N" will return to Setup Utility.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
7ZMMC Motherboard
Appendix: Acronyms
Acronyms
ACPI
APM
AGP
AMR
ACR
BIOS
CPU
CMOS
CRIMM
CNR
DMA
DMI
DIMM
DRM
DRAM
DDR
ECP
ESCD
ECC
EMC
EPP
Meaning
Advanced Configuration and Power Interface
Advanced Power Management
Accelerated Graphics Port
Audio Modem Riser
Advanced Communications Riser
Basic Input / Output System
Central Processing Unit
Complementary Metal Oxide Semiconductor
Continuity RIMM
Communication and Networking Riser
Direct Memory Access
Desktop Management Interface
Dual Inline Memory Module
Dual Retention Mechanism
Dynamic Random Access Memory
Double Data Rate
Extended Capabilities Port
Extended System Configuration Data
Error Checking and Correcting
Electromagnetic Compatibility
Enhanced Parallel Port
ESD
FDD
FSB
Electrostatic Discharge
Floppy Disk Device
Front Side Bus
HDD
IDE
IRQ
Hard Disk Device
Integrated Dual Channel Enhanced
Interrupt Request
I/O
Input / Output
IOAPIC
ISA
LAN
Input Output Advanced Programmable Input Controller
Industry Standard Architecture
Local Area Network
LBA
LED
Logical Block Addressing
Light Emitting Diode
MHz
MIDI
MTH
MPT
NIC
Megahertz
Musical Interface Digital Interface
Memory Translator Hub
Memory Protocol Translator
Network Interface Card
OS
Operating System
OEM
PAC
Original Equipment Manufacturer
PCI A.G.P. Controller
POST
PCI
RIMM
SCI
SECC
SRAM
SMP
SMI
USB
VID
Power-On Self Test
Peripheral Component Interconnect
Rambus in-line Memory Module
Special Circumstance Instructions
Single Edge Contact Cartridge
Static Random Access Memory
Symmetric Multi-Processing
System Management Interrupt
Universal Serial Bus
Voltage ID
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|