AEG Washer 2252 F User Manual

LAVAMAT PRINCESS 2252 F  
User manual  
Washing machine  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
The following symbols are used in this manual:  
Important information concerning your personal safety and information on  
how to avoid damaging the appliance  
General information and tips  
Environmental information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Contents  
Contents  
Instruction for the user  
Safety information  
Product description  
Detergent dispenser drawer  
Control panel  
7
7-9  
10  
10  
11  
First use  
11  
Personalization  
Acoustic signals  
Child safety lock  
12  
12  
12  
Daily use  
12  
12  
13  
13  
14  
14  
15  
15  
15  
15  
15  
15  
15  
16  
16  
16  
16  
17  
Load the laundry  
Measure out the detergent and the fabric softener  
Select the required programme  
Select the spin speed or the Rinse Hold option  
Programm option button  
Select the Prewash option  
Select the Stain option  
Select the Time Saving option  
Display  
Select the Start/Pause  
Duration of the selected programme  
Incorrect option selection  
Alarm codes  
End of programme  
Select the Start/Pause  
Programme progress display  
Select an additional rinse  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
5
Altering an option or a running programme  
Interrupting a programme  
17  
17  
17  
17  
18  
Cancelling a programme  
Opening the door after the programme has started  
At the end of the programme  
Washing programmes  
19-20  
21  
Programme information  
Preparing the wash cycle  
Sorting out the laundry  
Temperatures  
22  
22  
22  
22  
23  
23  
24  
25  
25  
25  
Before loading the laundry  
Maximum loads  
Laundry weights  
Removing stains  
Detergents and additives  
Quantity of detergent to be used  
Degrees of water hardness  
International wash code symbols  
26  
Care and cleaning  
Descaling  
27  
27  
27  
27  
27  
27  
28  
28  
28  
30  
30  
31  
After each wash  
Maintenance wash  
External cleaning  
Detegent dispenser drawer  
Washing drum  
Door seal  
Drain pump  
Water inlet filter  
Emergency emptying out  
Frost precautions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Contents  
Something not working  
Techinical Data  
32-34  
35  
Consumption value  
36  
Installation  
37  
37  
39  
39  
40  
40  
41  
41  
Unpacking  
Positioning and levelling  
Water inlet  
Water stop-device  
Water drainage  
Electrical connection  
Permanent connection  
Enviroment concerns  
Packaging materials  
Old machine  
42  
42  
42  
42  
Ecological hints  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
7
Instruction for the user  
Safety information  
Prior to using for the first time  
The safety of AEG/ELECTROLUX appliances complies with the industry  
standards and with legal requirements on the safety of appliances. However,  
as manufacturers, we feel it is our duty to provide the following safety notes.  
You MUST read them carefully before installing or using the appliance.  
It is most important that this instruction book should be retained with the  
appliance for future reference. Should the appliance be sold or transferred to  
another owner, or should you move house and leave the appliance, always  
ensure that the book is supplied with the appliance in order that the new  
owner can get to know the functioning of the appliance and the relevant  
warnings.  
You MUST read them carefully before installing or using the appliance.  
Before first starting up, check the machine for any damage incurred during  
transport. Never connect up a damaged machine. If parts are damaged,  
contact your supplier.  
If the appliance is delivered in the winter months when there are minus  
temperatures: Store the washing machine at room temperature for 24 hours  
before using for the first time.  
General safety  
It is dangerous to alter the specifications or attempt to modify this product in  
any way.  
During high temperature wash programmes the door glass may get hot. Do  
not touch it!  
Make sure that small pets do not climb into the drum. To avoid this, please  
check into the drum before using.  
Any objects such as coins, safety pins, nails, screws, stones or any other hard,  
sharp material can cause extensive damage and must not be placed into the  
machine.  
Only use the advised quantities of fabric softener and detergent. Damage to  
the fabric can ensue if you over-fill. Refer to the manufacturer’s  
recommendations of quantities.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Safety information  
Wash small items such as socks, laces, washable belts etc in a washing bag or  
pillow case as it is possible for such items to slip down between the tub and  
the inner drum.  
Do not use your washing machine to wash articles with whalebones, material  
without hems or torn material.  
Always unplug the appliance and turn off the water supply after use, clean  
and maintenance.  
Under no circumstances should you attempt to repair the machine yourself.  
Repairs carried out by inexperienced persons may cause injury or serious  
malfunctioning. Contact your local Service Centre. Always insist on genuine  
spare parts.  
Installation  
When unpacking the appliance, check that it is not damaged. If in doubt, do  
not use it and contact the Service Centre.  
All packing and transit bolts must be removed before use. Serious damage can  
occur to the product and to property if this is not adhered to. See relevant  
section in the user manual.  
After having installed the appliance, check that it is not pressing or standing on  
its electrical supply cable, inlet hose and drain hose.  
If the machine is situated on a carpeted floor, please adjust the feet in order to  
allow air to circulate freely  
Always be sure, that there is no water leakage from hoses and their connections  
after the installation.  
If the appliance is installed in a location subject to frost, please read the  
«dangers of freezing» chapter.  
Any plumbing work required to install this appliance should be carried out by a  
qualified plumber or competent person.  
Any electrical work required to install this appliance should be carried out by a  
qualified electrician or competent person.  
Use  
This appliance is designed for domestic use. It must not be used for purposes  
other than those for which it was designed.  
Only wash fabrics which are designed to be machine washed. Follow the  
instructions on each garment label.  
Do not overload the appliance. See the relevant section in the user manual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
9
Before washing, ensure that all pockets are empty and buttons and zips are  
fastened. Avoid washing frayed or torn articles and treat stains such as paint,  
ink, rust, and grass before washing. Underwired bras must NOT be machine  
washed.  
Garments which have been in contact with volatile petroleum products should  
not be machine washed. If volatile cleaning fluids are used, care should be  
taken to ensure that the fluid is removed from the garment before placing in  
the machine.  
Never pull the power supply cable to remove the plug from the socket; always  
take hold of the plug itself.  
Never use the washing machine if the power supply cable, the control panel,  
the working surface or the base are damaged so that the inside of the washing  
machine is accessible.  
Child Safety  
This appliance is not intended for use by person (including children) with  
reduced physical sensory or mental capabilities or lack of experience and  
knowledge unless they have been given supervision or instruction concerning  
use of the appliance by a person responsible for their safety.  
Young children should be supervised to ensure that they do not play with the  
appliance.  
The packaging components (e.g. plastic film, polystyrene) can be dangerous to  
children - danger of suffocation! Keep them out of children’s reach.  
Keep all detergents in a safe place out of children’s reach.  
Make sure that children or pets do not climb into the drum. To avoid this the  
machine incorporates special feature. To activate this device, rotate the button  
(without pressing it) inside the door clockwise until the groove is horizontal. If  
necessary use a coin. To disable this device and restore the possibility of closing  
the door, rotate the button anti-clockwise until the groove is vertical.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Safety information  
Product description  
Your new appliance meets all modern requirements for effective treatment of  
laundry with low water, energy and detergent consumption.  
The ECO valve system allows total use of detergent and reduces water  
consumption so saving energy.  
Detergent dispenser drawer  
Control panel  
1
2
3
4
5
6
Rating plate  
Drain pump  
Door opening handle  
Adjustable feet  
Detergent dispenser drawer  
Compartment for prewash phase or stain remover used for prewash. The  
prewash detergent is added at the beginning of the wash programme. The  
stain remover is added during the STAIN-Action phase in the main wash.  
Compartment for powder or liquid detergent used for main wash.  
Compartment for liquid additives (fabric softener, starch).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel 11  
Control panel  
LAUFZEIT  
ANT  
AUS  
ARRET  
TEMPS REST  
ENERGIESPAREN  
ECONOMIQUE  
KOCH-/BUNTWÄSCHE  
BLANC/COULEURS  
30 MIN - 3 KG  
RAFRAICHIR  
95  
60  
1200  
900  
700  
500  
SCHLEUDERN  
ESSORAGE  
40-60 MIX  
PUMPEN  
VIDANGE  
FEINSPÜLEN  
RINC. DELICATS  
40  
WASCHEN  
LAVAGE  
30  
TÜR  
PORTE  
6P0FLEGELEICHT  
EXTRASPÜLEN  
SYNTH.  
RINCAGE  
30  
50  
WOLLE/SEIDE  
LAINE/SOIE  
SCHLEUDERN  
ESSORAGE  
START/PAUSE  
DEPART/PAUSE  
VORWÄSCHE  
PRELAVAGE  
FLECKEN  
TACHES  
ZEITSPAREN  
TEMPS  
40  
40  
30  
30  
FEINWÄSCHE  
LEICHTBÜGELN PLUS  
REPASSAGE FACILE PLUS  
40 40  
LINGE DELICATS  
SILENT SYSTEM  
1
2 3 4 5  
6 7  
8
6
7
8
Display  
(Laufzeit-Temps restant)  
«Start/Pause» button  
(Start/Pause-Départ/Pause)  
Programme progress display:  
Wash (Waschen/Lavage)  
Door (Tür/Porte)  
Programme selector dial  
1
2
Spin reduction button  
(Schleudern-Essorage)  
«Prewash» button  
(Vorwäsche-Prélavage)  
«Stain» button  
(Flecken-Taches)  
«Time Saving» button  
(Zeitsparen-Temps)  
3
4
5
Extra rinse (Extraspülen/Rinçage+)  
Henceforth, the programme selector dial, the different buttons and the  
programme progress display will be indicated in all the book with the relevant  
numbers given in the table above.  
First Use  
Ensure that the electrical and water connections comply with the installation  
instructions.  
Remove the polystyrene block and any material from the drum.  
Pour 2 litres of water into the main wash compartment  
of the detergent  
drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C,  
without any laundry in the machine, to remove any manufacturing residue from  
the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer  
and start the machine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Use  
Personalization  
Acoustic signals  
The machine is provided of an acoustic device, which sounds in the following  
cases:  
at the end of the cycle  
in the event of operating problems  
By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the  
By pressing these 2 buttons again, the acoustic signal is reactivated.  
Child safety lock  
This device permits you to leave the appliance unsupervised without having the  
worry that children might be injured by or cause damage to the appliance.  
This function remains able also when the washing machine is not working.  
There are two different ways to set this option:  
before pressing button 7: it will be impossible to start the machine.  
after pressing button 7 it will be impossible to change any other programme  
or option.  
To enable (disable) this option press simoultaneously for about 6 seconds 4 and  
5 buttons until the icon appears (disappears) on (from) the display.  
Daily Use  
Load the laundry  
1. Open the door by carefully pulling the door handle outwards. Place the  
laundry in the drum, one item at a time, shaking them out as much as  
possible.  
2. Close firmly the door. You must hear a click  
during closing.  
Attention! Do not embed the laundry  
between the door and the rubber joint.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use 13  
Measure out the detergent and the fabric softener  
Your new appliance was designed to reduce water, energy and detergent  
consumption.  
1. Pull out the dispenser drawer until it  
stops. Measure out the amount of  
detergent required, pour it into the main  
wash compartment  
and, if you wish  
to carry out the prewash phase or to  
perform the stain function, pour the  
detergent or the stain remover into the  
compartment marked  
2. If required, pour fabric softener into the  
compartment marked (the amount  
.
used must not exceed the MAX mark in  
the drawer). Close the drawer gently.  
Select the required programme  
You can choose the right programme for any  
type of laundry following the descriptions on  
the washing programme tables (see Washing  
Programmes).  
Turn the programme selector dial to the required programme. The programme  
selector determines the type of washing cycle (e.g. water level, drum movement,  
number of rinses) and the washing temperature according to the type of laundry.  
= Cold wash.  
The light of button 7 starts to flash and the display shows the duration of the  
selected programme.  
The selector dial can be turned either clockwise or anticlockwise. Position «O» (Aus  
Arrêt) to Reset programme/ Switching OFF of the machine.  
At the end of the programme the selector dial must be turned to position  
«O» (Aus Arrêt), to switch the machine off.  
Attention!  
If you turn the programme selector dial to another programme when the  
machine is working, the yellow pilot light of button 7 will flash 3 times to  
indicate a wrong selection. The machine will not perform the new selected  
programme.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Use  
Select the spin speed or the rinse hold option  
Press button 2 repeatedly to change the spin speed, if you want your laundry to  
be spun at a speed different from the one proposed by the washing machine.  
The relevant light will light up.  
The maximum spin speed for cotton programmes is: 1200 rpm  
For the maximum speed allowed for each programme, please refer to the chapter  
«Washing Programmes».  
Rinse Hold  
: by selecting this option the water of the last rinse is not  
emptied out to prevent the fabrics from creasing. When the programme has  
finished the display shows a 0 flashing, the pilot light Door goes on, the  
Start/Pause light is off and the door is blocked to indicate that the water must  
be emptied out.  
To empty the water out:  
turn the programme selector dial to O  
select the Drain or Spin programme  
reduce the spin speed if needed, by means of the relevant button  
depress button 7  
when the programme has finished the display shows a 0 flashing. The pilot  
light Door goes off and the door can be opened.  
Programme option button  
Depending on the programme, different functions can be combined. These must  
be selected after choosing the desired programme and before depressing button  
7.  
When these buttons are pressed, the corresponding pilot lights come on. When  
they are pressed again, the pilot lights go out.  
If an incorrect option is selected, the integrated yellow pilot light of button 7  
flashes for 3 times and the Err message appears on the display for some seconds.  
Important!  
For the compatibility among the washing programmes and the options see  
chapter Washing Porgrammes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use 15  
Select the Prewash option  
Select this option if you wish your laundry to be prewashed at 30°C before the  
main wash. The prewash ends with a short spin in programmes for cotton and  
synthetic fabrics, whereas in the programmes for delicate fabrics the water is  
only drained.  
The relevant light will light up.  
Select the Stain option  
Select this option to treat heavily soiled or stained laundry with stain remover  
(extended main wash with time optimised stain action phase). The relevant light  
will light up. This option is not available with a temperature lower than 40°C.  
Attention! If you wish to perform a programme with the stain option, pour  
stain remover into compartment  
.
Select the Time Saving option  
This option allows you to modify the washing time, automatically proposed by  
the washing machine.  
Daily: By pressing button 5 once, the corresponding pilot light illuminates and  
the washing duration will be reduced to wash daily soiled laundry.  
On the display will be visualized the decreased washing time.  
Super Quick: By pressing this button twice, the relative pilot light remains lit,  
the washing duration will be reduced to wash lightly soiled laundry or items that  
have been used or worn for a short time. On the display will be visualized the  
decreased washing time. (In this case, reduce the maximum load sizes)  
Display  
The display shows the following information:  
Duration of the selected programme  
After selecting a programme, the duration is displayed in hours and minutes (for  
example 2 .05 ). The duration is calculated automatically on the basis of the  
maximum recommended load for each type of fabric.  
After the programme has started, the time remaining is updated every minute.  
Incorrect option selection  
If an option which is not compatible with the set wash programme is selected,  
the message Err is displayed for about 2 seconds and the yellow light of button  
7 starts flashing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 Use  
Alarm codes  
In the event of operating problems, some alarm codes can be displayed, for  
example E2 0 (see paragraph «Something not working»).  
End of programme  
When the programme has finished a flashing zero is displayed, the Door pilot  
light and the light of button 7 go out and the door can be opened.  
Select the Start/Pause  
To start the selected programme, press button 7; the corresponding red pilot light  
stops flashing.  
The washing pilot light wash is on to indicate that the appliance starts operating.  
The door pilot light door is on to indicate the door is locked.  
To interrupt a programme which is running, depress button 7: the corresponding  
red pilot light starts to flash.  
To restart the programme from the point at which it was interrupted, press the  
button 7 again.  
If an incorrect option is selected, the integrated yellow pilot light of the button  
7 flashes for 3 times the message Err is displayed for about 2 seconds.  
Programme progress display  
After having pressed button7, the wash pilot lights illuminates.  
When the pilot light wash illuminates this means that the machine is performing  
the washing cycle.  
The door pilot light indicates if the door can be opened:  
light on: the door cannot be opened. The appliance is running.  
light off: the door can be opened. The washing programme is finished.  
When the appliance is performing additional rinses the Extra Rinse pilot light  
comes on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use 17  
Select an additional rinse  
This appliance is designed for saving water. However, for people with a very  
delicate skin (allergic to detergents) it may be necessary to rinse the laundry  
using an extra quantity of water (extra rinse).  
Press simultaneously the buttons 2 and 3 for some seconds: the Extra Rinse  
pilot light comes on in the programme progress display. This function stays per-  
manently on. To remove it press the same buttons again until the Extra Rinse  
light goes off.  
Altering an option or a running programme  
It is possible to change any option before the programme carries it out. Before  
you make any change, you must pause the washing machine by pressing the  
button 7.  
Changing a running programme is possible only by resetting it. Turn the  
programme selector dial to O and then to the new programme position.  
Start the new programme by depressing button 7 again.  
The washing water in the tub will be not emptied out  
Interrupting a programme  
Depress button 7 to interrupt a programme which is running, the corresponding  
light starts to flash. Depress the button again to restart the programme.  
Cancelling a programme  
Turn the selector dial to O to cancel a programme which is running. Now you  
can select a new programme.  
Opening the door after the programme has started  
First set the machine to pause by pressing button 7. The Door light goes off and  
the door can be opened.  
If the Door light does not go off and the door remains locked, this means that  
the machine is already heating, that the water level is above the bottom edge of  
the door. In this case the door can not be opened.  
If you cannot open the door but you need to open it you have to switch the  
machine off by turning the selector dial to O. After about some minutes the  
door can be opened (pay attention to the water level and temperature!).  
After this procedure, you must select the programme again and depress button 7  
to start it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 Use  
At the end of the programme  
The machine stops automatically, the light of the button 7 goes off, the buzzer  
sound and a flashing 0 will appear on the display.  
If the Rinse Hold option have been selected, the Door pilot light illuminates, a  
flashing 0 will appear on the display, the light of the button 7 goes off but the  
door remains locked to indicate that the water must be emptied out before  
opening the door.  
To empty out the water please read the steps on the Rinse Hold option  
paragraph.  
Turn the programme selector dial to O to switch the machine off.  
Remove the laundry from the drum and carefully check that the drum is empty.  
If you do not intend to carry out another wash, close the water tap. Leave the  
door open to prevent the formation of mildew and unpleasant smells.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes 19  
Washing programmes  
Programme/  
Type of laundry  
Temperature  
Description of  
programme  
Options  
Cottons  
Spin red./Rinse  
Hold, Prewash,  
Stain, Time saving,  
Extra rinse  
Main wash  
Rinses  
Long spin at the  
maximum speed  
(Kochwäsche  
White cotton  
blanc)  
95°-60°  
Cottons (Koch-  
Spin red./Rinse Hold  
Prewash, Stain*,  
Time saving**,  
Extra rinse  
Main wash  
Rinses  
Long spin at the  
maximum speed  
/Buntwäsche)  
Coloured cotton  
40°-30°  
40-60 MIX  
Synthetics  
Spin red./Rinse Hold  
Prewash, Stain*,  
Time saving,  
(Pflegeleicht  
Synthetic or mixed  
Synthétiques)  
fabrics  
Main wash, Rinses and  
Short spin  
60°-50°-40°-  
Extra rinse  
30°  
Easy Iron  
Spin red./Rinse Hold  
Extra rinse,  
Synthetics to be  
(Leichtbügeln  
Main wash, Rinses and  
Short spin  
gentle washed and  
Repassage  
facile plus) 40°  
spun.  
Prewash  
Delicates  
Spin red./Rinse  
Hold, Time saving,  
Prewash, Stain**  
Extra rinse  
(Feinwäsche  
Main wash, Rinses and  
Short spin  
Delicate fabrics: for  
example curtains  
Linge Délicat)  
40°-30°  
Special programme for  
hand washing fabrics  
and specially tested  
programme for wool  
garments bearing the  
«Pure new wool, non-  
shrink, machine  
Wool  
(Handwash)  
Main wash, Rinses and  
Short spin  
Spin red./Rinse Hold  
(Wolle plus  
Laine plus)  
40°-30°-  
washable» label.  
* Stain option can be selected only at the temperature of 40°C or higher.  
** Time Saving option cannot be selected with 40-60 MIX programme.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 Washing programmes  
Washing programmes  
Programme/  
Type of laundry  
Temperature  
Description of  
programme  
Options  
Delicate rinses  
Separate rinse cycle for  
(Feinspülen  
Spin red./Rinse Hold  
Extra rinse  
3 rinses and short spin  
Draining of water  
hand washed items.  
Rinçages)  
For emptying out the last  
rinse water in  
programmes with the  
Drain  
(Pumpen  
Vidange)  
Rinse Hold option.  
Spin  
Separate spin for all type  
(Schleudern  
of fabric.  
Drain and long spin at  
the maximum speed  
Spin reduction  
Spin reduction  
Essorage)  
Quick wash for sport  
Refresh  
items, or cotton and  
(30 Min -3 kg  
Main wash, Rinses and  
short spin  
synthetics items lightly  
Rafraîchir) 30°  
soiled or worn once.  
Main wash  
Rinses  
Long spin at the  
maximum speed  
White and fast  
ECO  
Spin red./Rinse Hold  
Prewash, Stain  
Extra rinse  
coloured cotton  
Energiesparen  
economy, lightly-heavy  
Economique  
soiled items.  
For cancelling the programme which is running  
or to switch the machine off.  
O/off  
Aus/ Arrêt  
Type of fabric  
Max. Load  
Cottons  
6 kg  
3 kg  
Synthethics and Delicates  
40° Easy Iron  
1,5 kg  
2 kg  
Wool and Handwash  
Refresh  
2 kg  
Cottons + Super quick  
3 kg  
Synthethics and Delicates + Super quick  
1,5 kg  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme information  
21  
Programme information  
Selecting this programme the laundry is gently washed  
and spun to avoid any creasing. In this way ironing is  
easier. Furthermore the machine will perform additional  
rinses.  
Easy Iron  
Washing programme for machine washable wool  
well as for hand washable woollens and delicate fabrics with  
the “hand washing” care symbol  
as  
Wool plus  
Handwash  
.
With this programme it is possible to rinse and spin  
garments which have been washed by hand.  
The machine performs 3 rinses, followed by a short final  
spin. The spin speed can be reduced by depressing button 2.  
Delicate rinses  
For emptying out the water of the last rinse in programmes  
with the Rinse Hold option.  
Drain  
Spin  
Turn first the programme selector dial to O, then select  
programme Drain and depress button 7.  
Separate spin for hand washed garments and after  
programmes with Rinse Hold option. Before selecting this  
programme the selector dial must be turned to O. You can  
choose the speed by means of the relevant button to adapt  
it to the fabrics to be spun.  
This programme can be selected for slightly or normally  
soiled white and fast colour cotton items. The temperature  
will decrease and the washing time will be extended. This  
allows to obtain a good washing efficiency by saving  
energy.  
ECONOMY  
OFF/O  
To reset a programme and to switch off the machine turn  
the selector dial to O. Now can a new programme be  
selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Preparing the wash cycle  
Preparing the wash cycle  
Sorting out the laundry  
Follow the wash code symbols on each garment label and the manufacturer’s  
washing instructions. Sort the laundry as follows: whites, coloureds, synthetics,  
delicates, woollens.  
Temperatures  
for normally soiled white cottons and linen (e.g. tea cloths,  
towels, tablecloths, sheets...).  
95° or 90°  
for normally soiled, colour fast garments (e.g. shirts, night  
dresses, pyjamas....) in linen, cotton or synthetic fibres and  
for lightly soiled white cotton (e.g. underwear).  
60°/50°  
for delicate items (e.g. net curtains), mixed laundry including  
synthetic fibres and woollens bearing the label «pure new  
wool, machine washable, non-shrink».  
40°-30°- Cold  
Before loading the laundry  
Never wash whites and coloureds together. Whites may lose their “whiteness” in  
the wash.  
New coloured items may run in the first wash; they should therefore be washed  
separately the first time.  
Make sure that no metal objects are left in the laundry (e.g. hair clips,  
safety pins, pins).  
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or  
long tapes.  
Remove persistent stains before washing.  
Rub particularly soiled areas with a special detergent or detergent paste.  
Treat curtains with special care. Remove hooks or tie them up in a bag or net.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing the wash cycle 23  
Maximum loads  
Recommended loads are indicated in the washing programme charts.  
General rules:  
Cotton, linen: drum full but not too tightly packed;  
Synthetics: drum no more than half full;  
Delicate fabrics and woollens: drum no more than one third full.  
Washing a maximum load makes the most efficient use of water and energy.  
For heavily soiled laundry, reduce the load size.  
Laundry weights  
The following weights are indicative:  
bathrobe  
napkin  
quilt cover  
sheet  
pillow case  
tablecloth  
1200 g  
100 g  
700 g  
500 g  
200 g  
250 g  
200 g  
100 g  
200 g  
100 g  
600 g  
200 g  
500 g  
100 g  
100 g  
towelling towel  
tea cloth  
night dress  
ladies’ briefs  
man’s work shirt  
man’s shirt  
man’s pyjamas  
blouse  
men’s underpants  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Preparing the wash cycle  
Removing stains  
Stubborn stains may not be removed by just water and detergent. It is therefore  
advisable to treat them prior to washing.  
Blood: treat fresh stains with cold water. For dried stains, soak overnight in  
water with a special detergent then rub in the soap and water.  
Oil based paint: moisten with benzine stain remover, lay the garment on a soft  
cloth and dab the stain; treat several times.  
Dried grease stains: moisten with turpentine, lay the garment on a soft  
surface and dab the stain with the fingertips and a cotton cloth.  
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be  
careful with rust stains which are not recent since the cellulose structure will  
already have been damaged and the fabric tends to hole.  
Mould stains: treat with bleach, rinse well (whites and fast coloureds only).  
Grass: soap lightly and treat with bleach (whites and fast coloureds only).  
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft  
cloth and dab the stain.  
Lipstick: moisten with acetone as above, then treat stains with methylated  
spirits. Treat any residual marks with bleach.  
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid,  
then rinse. Treat any residual marks with bleach.  
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then  
with acetic acid; treat any residual marks on white fabrics with bleach and then  
rinse thoroughly.  
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub  
with detergent paste.  
(*) do not use acetone on artificial silk.  
Detergents and additives  
Good washing results also depend on the choice of detergent and use of the  
correct quantities to avoid waste and protect the environment.  
Although biodegradable, detergents contain substances which, in large  
quantities, can upset the delicate balance of nature.  
The choice of detergent will depend on the type of fabric (delicates, woollens,  
cottons, etc.), the colour, washing temperature and degree of soiling.  
All commonly available washing machine detergents may be used in this  
appliance:  
powder detergents for all types of fabric,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing the wash cycle 25  
powder detergents for delicate fabrics (60°C max) and woollens,  
liquid detergents, preferably for low temperature wash programmes (60°C  
max) for all types of fabric, or special for woollens only.  
The detergent and any additives must be placed in the appropriate  
compartments of the dispenser drawer before starting the wash programme.  
If using concentrated powder or liquid detergents, a programme without  
prewash must be selected.  
Pour liquid detergent into the dispenser drawer compartment marked  
before starting the programme.  
just  
Any fabric softener or starching additives must be poured into the compartment  
marked  
before starting the wash programme.  
Follow the product manufacturer’s recommendations on quantities to use and do  
not exceed the «MAX» mark in the detergent dispenser drawer.  
Quantity of detergent to be used  
The type and quantity of detergent will depend on the type of fabric, load size,  
degree of soiling and hardness of the water used.  
Follow the product manufacturers’ instructions on quantities to use.  
Use less detergent if:  
• you are washing a small load,  
• the laundry is lightly soiled,  
• large amounts of foam form during washing.  
Degrees of water hardness  
Water hardness is classified in so-called “degrees” of hardness. Information on  
hardness of the water in your area can be obtained from the relevant water  
supply company, or from your local authority.  
Note: A water softener must be added when water has a medium-high degree  
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.  
The quantity of detergent can then always be adjusted to degree of hardness I (=  
soft).  
Degrees of water hardness  
Level  
Characteristic  
German  
°dH  
French  
°T.H.  
1
2
3
4
soft  
medium  
hard  
0-7  
8-14  
15-21  
> 21  
0-15  
16-25  
26-37  
> 37  
very hard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 International wash code symbols  
International wash code symbols  
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.  
Energetic wash  
30  
95  
60  
40  
Max. wash  
temperature  
95°C  
Max. wash  
temperature  
60°C  
Max. wash  
temperature  
40°C  
Max. wash  
temperature  
30°C  
Hand wash  
Do not  
wash  
at all  
60  
30  
Delicate wash  
Bleaching  
Ironing  
40  
40  
Bleach in cold water  
Do not bleach  
Hot iron  
Warm iron  
max 150°C  
Lukewarm iron  
max 110°C  
Do not iron  
max 200°C  
Dry cleaning  
Dry cleaning  
in all solvents  
Dry cleaning in  
perchlorethylene,  
petrol, pure alcohol,  
R 111 & R 113  
Dry cleaning  
in petrol,  
pure alcohol  
and R 113  
Do not  
dry clean  
high  
temperature  
low  
temperature  
Drying  
Flat  
On the line  
On clothes  
hanger  
Tumble dry  
Do not  
tumble dry  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and cleaning 27  
Care and cleaning  
You must DISCONNECT the appliance from the electricity supply, before you can  
carry out any cleaning or maintenance work.  
Descaling  
The water we use normally contains lime. It is a good idea to periodically use a  
water softening powder in the machine. Do this separately from any laundry  
washing, and according to the softening powder manufacturer's instructions.  
This will help to prevent the formation of lime deposits.  
After each wash  
Leave the door open for a while. This helps to prevent mould and stagnant smells  
forming inside the appliance. Keeping the door open after a wash will also help  
to preserve the door seal.  
Maintenance wash  
With the use of low temperature washes it is possible to get a build up of  
residues inside the drum.  
We recommend that a maintenance wash be performed on a regular basis.  
To run a maintenance wash:  
• The drum should be empty of laundry.  
• Select the hottest cotton wash programme.  
• Use a normal measure of detergent, must be a powder with biological  
properties.  
External cleaning  
Clean the exterior cabinet of the appliance with soap and water only, and then  
dry thoroughly.  
Important: do not use methylated spirits, solvents or similar products to clean  
the cabinet.  
Detergent dispenser drawer  
The detergent dispenser drawer should be  
cleaned regularly.  
1. Remove the detergent dispenser drawer  
by pulling it firmly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 Care and cleaning  
2. Remove the conditioner insert from the middle compartment.  
3. Clean all parts with water.  
4. Put the conditioner insert in as far as it will go, so that it is firmly in place.  
5. Clean all parts of the washing ma-  
chine, especially the nozzles in the top  
of the washing-in chamber, with a  
brush.  
6. Insert the detergent dispenser drawer  
in the guide rails and push it in.  
Washing drum  
Rust deposits in the drum may occur due to rusting foreign bodies in the  
washing or tap water containing iron.  
Important! Do not clean the drum with acidic descaling agents, scouring agents  
containing chlorine or iron or steel wool.  
1. Remove any rust deposits on the drum with a cleaning agent for stainless  
steel.  
2. Run a washing cycle without any washing to clean off any cleaning agent  
residues. Programme: COTTONS/LINEN 95, press the TIME SAVING button, add  
approx. 1/4 measuring cup of detergent.  
Door seal  
Check from time to time the door seal and eliminate  
eventual possible objects that could be trapped in the  
fold.  
Drain pump  
The pump should be inspected regularly and  
particularly if  
• the machine does not empty and/or spin  
• the machine makes an unusual noise during draining due to objects such as  
safety pins, coins etc. blocking the pump.  
Proceed as follows:  
1. Disconnect the appliance.  
2. If necessary wait until the water has  
cooled down.  
3. Open the pump door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and cleaning 29  
4. Place a container close to the pump to  
collect any spillage.  
5. Release the emergency emptying hose,  
place it in the container and remove its  
cap.  
6. When no more water comes out,  
unscrew the pump and remove it.  
Always keep a rag nearby to dry up  
spillage of water when removing the  
pump.  
7. Remove any objects from the pump  
impeller by rotating it.  
8. Put the cap back on the emergency  
emptying hose and place the latter  
back in its seat.  
9. Screw the pump fully in.  
10. Close the pump door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 Care and cleaning  
Warning!  
When the appliance is in use and depending on the programme selected there  
can be hot water in the pump. Never remove the pump cover during a wash  
cycle, always wait until the appliance has finished the cycle, and is empty. When  
replacing the cover, ensure it is securely retightened so as to stop leaks and  
young children being able to remove it.  
Water inlet filter  
If you notice that the machine is taking longer to  
fill, check that the filter in the water inlet hose is  
not blocked.  
1. Turn off the water tap.  
2. Unscrew the hose from the tap.  
3. Clean the filter in the hose with a stiff brush.  
4. Screw the hose back onto the tap.  
Emergency emptying out  
If the water is not discharged, proceed as follows to empty out the machine:  
1. pull out the plug from the power socket;  
2. close the water tap;  
3. if necessary, wait until the water has cooled down;  
4. open the the pump door;  
5. place a bowl on the floor and place the end of the emergency emptying hose  
into the bowl. Remove its cap. The water should drain by gravity into the  
bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.  
Repeat the procedure until water stops flowing out;  
6. clean the pump if necessary as previously described;  
7. replace the emergency emptying hose in its seat after having plugged it;  
8. screw the pump again and close the door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and cleaning 31  
Frost precautions  
If the machine is installed in a place where the temperature could drop below  
0°C, proceed as follows:  
1. Close the water tap and unscrew the water inlet hose from the tap.  
2. Place the end of the emergency emptying hose and that of the inlet hose in a  
bowl placed on the floor and let water drain out.  
3. Screw the water inlet hose back on and reposition the emergency emptying  
hose after having put the cap on again.  
By doing this, any water remaining in the machine is removed, avoiding ice  
forming and consequently damage to the appliance.  
When you use the machine again, make sure that the ambient temperature is  
above 0°C.  
Important! Every time you drain the water through the emergency emptying  
hose you must pour 2 litres of water into the main wash compartment of the  
detergent drawer and then run the drain programme. This will activate the ECO  
VALVE device avoiding that part of the detergent remains unused at next  
washing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Something not working  
Something not working  
Certain problems are due to lack of simple maintenance or oversights, which can be  
solved easily without calling out an engineer. Before contacting your local Service Centre,  
please carry out the checks listed below.  
During machine operation it is possible that the yellow pilot light of button 7 flashes, one  
of the following alarm codes appears on the display and at the same some acoustic signals  
sound every 20 seconds to indicate that the machine is not working:  
E10 : problem with the water supply  
E2 0 : problem with the water draining  
E40 : door open.  
Once the problem has been eliminated, press button 7 to restart the programme. If after  
all checks, the problem persists, contact your local Service Centre.  
Problem  
Possible cause/Solution  
The door has not been closed. E40  
• Close firmly the door.  
The plug is not properly inserted in the power socket.  
• Insert the plug into the power socket.  
There is no power at the socket.  
• Please check your domestic electrical installation.  
The washing machine does not  
start:  
The main fuse has blown.  
• Replace the fuse.  
The selector dial is not correctly positioned and the  
button 7 has not been depressed.  
• Please turn the selector dial and press button 7  
again.  
The water tap is closed. E10  
• Open the water tap.  
The inlet hose is squashed or kinked. E10  
• Check the inlet hose connection.  
The machine does not fill:  
The filter in the inlet hose is blocked.E10  
• Clean the water inlet hose filter.  
The door is not properly closed. E40  
• Close firmly the door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something not working 33  
Problem  
Possible cause/Solution  
The end of the drain hose is too low.  
• Refer to relevant paragraph in «water drainage»  
section.  
The machine fills then empties  
immediately:  
The drain hose is squashed or kinked. E2 0  
• Check the drain hose connection.  
The drain pump is clogged. E2 0  
• Clean the drain pump.  
The machine does not empty  
and/or does not spin:  
The option Rinse Hold has been selected.  
• Disable the option Rinse Hold.  
• Select the Drain or Spin programme.  
The laundry is not evenly distributed in the drum.  
• Redistribute the laundry.  
Too much detergent or unsuitable detergent (creates  
too much foam) has been used.  
• Reduce the detergent quantity or use another one.  
Check whether there are any leaks from one of the  
inlet hose fittings. It is not always easy to see this as  
the water runs down the hose; check to see if it is  
damp.  
There is water on the floor:  
• Check the water inlet hose connection.  
The drain hose is damaged.  
• Change it with a new one.  
The cap on the emergency emptying hose has not  
been replaced after cleaning the pump.  
• Put the cap back on the emergency emptying and  
place the latter back in its seat.  
Too little detergent or unsuitable detergent has been  
used.  
• Increase the detergent quantity or use another one.  
Stubborn stains have not been treated prior to  
washing.  
• Use commercial products to treat the stubborn  
stains.  
Unsatisfactory washing results:  
The correct temperature was not selected.  
• Check if you have selected the correct temperature.  
Excessive laundry load.  
• Introduce into the drum less laundry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Something not working  
Problem  
Cause possible/Solution  
The programme is still running.  
• Wait the end of washing cycle.  
The door lock has not been released.  
The door will not open:  
• Wait until the Door light has gone off.  
There is water in the drum.  
• Select drain or spin programme to empty out the  
water.  
The transit bolts and packing have not been removed.  
• Check the correct installation of the appliance.  
The support feet have not been adjusted  
• Check the correct levelling of the appliance.  
The machine vibrates or is noisy:  
The laundry is not evenly distributed in the drum.  
• Redistribute the laundry.  
Maybe there is very little laundry in the drum.  
• Load more laundry.  
The electronic unbalance detection device has cut in  
because the laundry is not evenly distributed in the  
drum. The laundry is redistributed by reverse rotation  
of the drum. This may happen several times before  
the unbalance disappears and normal spinning can  
resume. If, after some minutes, the laundry is still not  
evenly distributed in the drum, the machine will not  
spin.  
Spinning starts late or the machine  
does not spin:  
• Redistribute the laundry.  
The machine is fitted with a type of motor which  
makes an unusual noise compared with other  
traditional motors. This new motor ensures a softer  
start and more even distribution of the laundry in the  
drum when spinning, as well as increased stability of  
the machine.  
The machine makes an unusual  
noise:  
Machines based on modern technology operate very  
economically using very little water without affecting  
performance.  
No water is visible in the drum:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data 35  
If you are unable to identify or solve the problem,  
contact our service centre. Before telephoning,  
make a note of the model, serial number and  
purchase date of your machine: the Service Centre  
will require this information.  
P
r
M
o
d
o
d
. . . .  
.
N
.
o
.
. .  
. . .  
. . . . . .  
S
. .  
. .  
. .  
e
r
.
N
o
. .  
.
. . . .  
. . .  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
Techinical Data  
Width  
Height  
Depth  
60 cm  
85 cm  
63 cm  
Dimensions  
(door included)  
Electrical connection Voltage - Information on the electrical connection is given on the rating  
Overall power - Fuse  
Water supply pressure  
Maximum Load  
plate on the inner edge of the appliance door  
Minimum  
Maximum  
0,05 MPa  
0,80 MPa  
Cotton  
6 kg  
Spin Speed  
Maximum  
1200 rpm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Consumption value  
Consumption value  
Water consumption Energy consumption Programme duration  
Programme  
(in litres)  
(in kWh)  
(in minutes)  
61  
2.0  
White Cottons 95°  
White-colour Cottons 60°  
40-60 MIX 40°  
Cottons 40°  
58  
46  
58  
54  
60  
60  
53  
50  
-
1.3  
1.14  
0.7  
1.0  
Synthetics 60°  
Easy Iron 40°  
Delicates 40°  
Wool (Handwash) 40°  
Delicate Rinses  
Drain  
0.35  
0.55  
0.4  
0.05  
-
Spin  
-
-
57  
46  
0.28  
1.02  
Refresh 30°  
Eco 60°(*)  
The consumption data shown on this chart is to be considered purely indicative, as  
it may vary depending on the quantity and type of laundry, on the inlet water  
temperature and on the ambient temperature. It refers to the highest temperature  
for each wash programme.  
(*) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the  
data entered in the energy label, in compliance with EEC 92/75 standards.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation 37  
Installation  
Unpacking  
All transit bolts and packing must be removed before using the appliance.  
You are advised to keep all transit devices so that they can be refitted if the  
machine ever has to be transported again.  
1. After removing all the packaging, carefully lay  
machine on it’s back to remove the  
polystyrene base from the bottom.  
HEC0008  
2. Remove the power supply cable and the  
draining hose from the hose holders on the rear of the  
appliance.  
HEC0001  
3. With the provided spanner unscrew and  
remove the central rear bolt A.  
A
HEC00022  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Installation  
4. Unscrew and remove the two large rear bolts B  
and the six smaller bolts C.  
C
B
C
D
C
B
HEC0003  
5. Remove the bracket D and tighten up the six  
smaller bolts C. Slide out the relevant plastic  
spacer E.  
E
HEC0023 C  
6. Open the porthole, take out the inlet hose from the  
drum and remove the polystyrene block fitted on the  
door seal.  
HEC0010  
7. Fill the smaller upper hole and the two large ones with  
the corresponding plastic plug caps supplied in the bag  
containing the instruction booklet.  
8. Connect the water inlet hose as described under the  
paragraph «Water inlet».  
All the different plug caps are supplied with the appliance in  
the plastic bag containing the instruction booklet.  
HEC0005  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation 39  
Positioning and levelling  
Install the machine on a flat hard floor.  
Make sure that air circulation around the machine is not impeded by carpets,  
rugs etc.  
Before placing it on small tiles, apply a rubber coating.  
Never try to correct any unevenness in the floor by  
putting pieces of wood, cardboard or similar  
materials under the machine.  
If it is impossible to avoid positioning the machine  
next to a gas cooker or coal-burning stove, an  
insulating panel covered with aluminium foil on the  
side facing the cooker or stove, must be inserted  
between the two appliances.  
HEC007S  
The machine must not be installed in rooms where  
the temperature can drop below 0.  
The water inlet hose and the drain hose must not be kinked.  
Please ensure that when the appliance is installed, it is easily accessible for the  
engineer in the event of a breakdown.  
Carefully level by screwing the adjustable feet in or out. Never place cardboard,  
wood or similar materials under the machine to compensate for any unevenness  
in the floor.  
Water inlet  
An inlet hose is supplied and can be found inside the machine drum.  
Do not use the already employed hoses to connect to the water supply.  
This appliance must be connected to a cold water supply.  
1. Open the porthole and extract the inlet hose.  
2. Connect the hose with the angled connection to  
the machine.  
Do not place the inlet hose downwards. Angle  
the hose to the left or right depending on the  
position of your water tap.  
HEC0006  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Installation  
3. Set the hose correctly by loosening the ring nut.  
After positioning the inlet hose, be sure to tighten  
the ring nut again to prevent leaks.  
4. Connect the hose to a tap with a 3/4” thread.  
Always use the hose supplied with the appliance.  
Installation should comply with local water authority  
and building regulations requirements. A minimum  
water pressure of 0.05 MPa is required for safe  
operation of the appliance.  
If you cannot make the cold water connection direct from the rising mains, you  
may be able to operate the appliance from your cold water storage system. There  
should be a minimum distance of between the appliance’s inlet and the bottom of  
the water storage tank.  
Water-stop device  
The inlet hose is provided with a water stop device,  
which protects against damage caused by water leaks in  
the hose which could develop due to natural ageing of  
the hose. This fault is shown by a red sector in the  
window “A. Should this occur, turn the water tap off and  
refer to your Service Centre to replace the hose.  
A
352  
Water drainage  
The end of the drain hose can be positioned in three ways:  
Hooked over the edge of a sink using the  
plastic hose guide supplied with the machine.  
In this case, make sure the end cannot come  
unhooked when the machine is emptying.  
This could be done by tying it to the tap with a piece  
of string or attaching it to the wall.  
In a sink drain pipe branch. This branch must be  
above the trap so that the bend is at least 60 cm above  
the ground.  
Directly into a drain pipe at a height of not less than 60 cm and not more  
than 90 cm.  
The end of the drain hose must always be ventilated, i.e. the inside diameter of  
the drain pipe must be larger than the outside diameter of the drain hose.  
The drain hose must not be kinked.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation 41  
P1118  
Important!  
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and  
joining piece is available from your local Service Centre.  
Electrical connection  
This machine is designed to operate on a 220-230 V, single-phase,  
50 Hz supply.  
Check that your domestic electrical installation can take the maximum load  
required (2.2 kW), also taking into account any other appliances in use.  
Connect the machine to an earthed socket.  
The manufacturer does not accept any responsibility for damage or  
injury through failure to comply with the above safety precaution.  
Permanent connection  
In the case of a permanent connection it is necessary that you install a double pole  
switch between the appliance and the electricity supply (mains), with a minimum  
gap of 3 mm between the switch contacts and of a type suitable for the required  
load in compliance with the current electrical regulations.  
The switch must not break the yellow and green earth cable at any point.  
This operation must be performed by a qualified electrician.  
The power supply cable must be easily accessible after installing the  
machine.  
Should the appliance power supply cable need to be replaced, this must  
be carried out by a Service Centre.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 Environment concerns  
Enviroment concerns  
Packaging materials  
The materials marked with the symbol  
>PE<=polyethylene  
are recyclable.  
>PS<=polystyrene  
>PP<=polypropylene  
This means that they can be recycled by disposing of them properly in  
appropriate collection containers.  
Old machine  
Use authorised disposal sites for your old appliance. Help to keep your country tidy!  
The symbol on the product or on its packaging indicates that this product may  
not be treated as household waste. Instead it shall be handed over to the applicable  
collection point for the recycling of electrical and electronic equipment. By ensuring  
this product is disposed of correctly, you will help prevent potential negative  
consequences for the environment and human health, which could otherwise be  
caused by inappropriate waste handling of this product. For more detailed  
information about recycling of this product, please contact your local city office,  
your household waste disposal service or the shop where you purchased the  
product.  
Ecological hints  
To save water, energy and to help protect the environment, we recommend that  
you follow these tips:  
Normally soiled laundry may be washed without prewashing in order to save  
detergent, water and time (the environment is protected too!).  
The machine works more economically if it is fully loaded.  
With adequate pre-treatment, stains and limited soiling can be removed; the  
laundry can then be washed at a lower temperature.  
Measure out detergent according to the water hardness, the degree of soiling  
and the quantity of laundry being washed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Repetition 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Network Card 3C990B TX M User Manual
3Com Switch DUA1771 0AAA01 User Manual
3D Innovations Gas Grill UE700 User Manual
AG Neovo Computer Monitor F 15 User Manual
Aiphone Intercom System AN 8540DS User Manual
American Standard Outdoor Shower 3630000 User Manual
Ask Proxima Projector C105 DP6155 User Manual
Axis Communications Medical Alarms T94F02D User Manual
Behringer Stereo System FCA1616 User Manual
Beko Clothes Dryer DV 7220 X User Manual