S40C/X40C
Multimedia Projector
Operator's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
S40C/X40C Multimedia Projector
Operator's Guide
Thank you for purchasing this projector.
CAUTION • Please read the accompanying manual “Product Safety Guide"
and this “Operator's Guide” thoroughly to ensure correct usage through
understanding. After reading, store this instruction manual in a safe place for
future reference.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
PROJECTOR FEATURES............... 2
PREPARATIONS ............................. 2
PART NAMES.................................. 4
SETTING UP THE PROJECTOR .... 6
CONNECTING YOUR DEVICES ..... 8
USING
THE REMOTE CONTROL ........... 12
TURNING ON THE POWER .......... 14
TURNING OFF THE POWER ........ 16
ADJUSTING THE VOLUME ........... 17
TEMPORARILY
SOUND THE SOUND ................... 17
ADJUSTING THE POSITION ........ 18
USING THE AUTOMATIC
ADJUSTMENT FEATURE ........... 19
CORRECTING
Page
FREEZING THE SCREEN ............. 21
SIGNAL SEARCHING ................... 22
SELECTING
THE ASPECT RATIO ..................... 22
TEMPORARILY
BLANKING THE SCREEN .......... 22
USING THE MENU FUCTIONS ..... 23
MULTIFUNCTIONAL
SETTINGS .................................... 24
THE LAMP ..................................... 29
THE AIR FILTER ............................ 31
OTHER CARE ................................ 33
WHAT TO DO
WHEN YOU THINK A MACHINE
DEFECT HAS OCCURRED ......... 34
SPECIFICATIONS .......................... 37
ACCESSORIES .............................. 38
KEYSTONE DISTORTIONS ......... 20
USING THE MAGNIFY FEATURE ... 21
1
Download from Www.Somanuals.com. All Manuals Search And Download.
This liquid crystal projector is used to project
various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space
is required for installation and large images can
easily be realized.
PROJECTOR
FEATURES
Ultra High Brightness
Keystone Distortion Correction
G
G
Crisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
Quick correction of distorted images electrically
Partial Magnification Function
Whisper Mode Equipped
G
G
Interesting parts of images can be magnified
for closer viewing
Special mode is available for reducing
projector noise to achieve quieter operation
Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact your dealer if
anything is missing.
PREPARATIONS
NOTE • Keep the original packing material for future reshipment.
Power cord
(UK Type)
Power cord
(Europe Type)
Power cord
(US Type)
Projector
S40/X40
Multimedia Projector
Operator's Guide
S40/X40 Projecteur multimedia
S40/X40 Multimedia-Projektor
-
Guide de L' opérateur
Benutzerhandbuch
-
S40/X40 Proyector de Multimedia
S40/X40 Proiettore Multimediale
S40/X40 Multimedia Projector
S40/X40 Projector dos Multimedia
-
Guía del usuario
-
Guida dell' operatore
-
Gebruiksaanwijzing
-
Guia da operador
S40/X40 Multimedia Projektør- Brukerhåndbok
RGB cable
Video/Audio
cable
Component Video
cable
(with white lead)
(with green lead)
Operator's Guide
Product Safety Guide
Warranty
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
Quick Start Guide
MUTE
OFF
FREEZE
KEYSTONE
Stereo Mini-Cable
POSITION
MENU
ENTER
Two AA batteries
(for the
ESC
RESET
remote control)
Remote control
Soft case
Download from Www.Somanuals.com. All Manuals Search And Download.
2
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the
following safety guidelines to insure safe operation of the projector:
•
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
8
～
11
1
Insert the Alkaline batteries into the
control
12
2
3
Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
Power outlet
(2)
(1)
Power cord
AC inlet
3
Download from Www.Somanuals.com. All Manuals Search And Download.
THE TERMINAL PANEL
rgb port
10
Remote sensor
13
control port
10
component video CR/PR port
component video Y port
component video CB/PB port
11
11
11
audio port
10
s-video port
11
audio R port
11
audio L port
video port
11
11
THE REMOTE CONTROL
SEARCH button
22
14
STANDBY/ON button
RGB button
15
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
VIDEO button
AUTO button
BLANK button
15
22
19
22
ASPECT
BLANK
VOLUME
ASPECT button
MAGNIFY
ON
VOLUME button
MUTE button
17
17
20
MAGNIFY buttons
FREEZE button
21
21
MUTE
OFF
FREEZE
KEYSTONE
KEYSTONE button
POSITION
MENU
POSITION button
18
23
23
MENU button
23
ENTER
,
,
,
Cursor buttons
ESC
RESET
RESET button
ENTER button
24
23
ESC button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE PROJECTOR
CAUTION • Install the projector in a suitable environment according to instructions
of the “Product Safety Guide” and this manual "Operator's Guide".
• If you press the elevator button without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator button to adjust the elevator foot.
Adjusting the Projector's Elevator Foot
You can use the elevator foot to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator foot is 0 to 9 degrees.
Press and hold in the elevator
button
1
Raise or lower the projector to the
2
desired height and then release the
elevator button
When you release the elevator button, the elevator
foot will lock into position.
As necessary, you can also finely
3
adjust the left-right slope of the
projector by twisting the rear foot
adjuster screw by hand
9
Rear Foot Adjuster
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Screen Size and Projection Distance
Refer to the illustrations and tables below to determine the screen size and
projection distance.
The values shown in the table are calculated for a full size screen
(S40: 800x600 pixels/X40: 1024x768 pixels).
a:Distance from the projector to the screen ( 10%)
b:Distance from the lens center to the bottom of the screen ( 10%)
c:Distance from the lens center to the top of the screen ( 10%)
The screen
Top view
If 4:3 aspect ratio
4
3
a [inch (m)]
Min. Max.
b
c
Screen Size [inch (m)]
[inch (cm)] [inch (cm)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
35 (0.9) 42 (1.1) 1 (2) 17 (44)
47 (1.2) 56 (1.4) 1 (3) 23 (58)
59 (1.5) 71 (1.8) 1 (4) 29 (73)
71 (1.8) 85 (2.2) 2 (4) 34 (87)
83 (2.1) 100 (2.5) 2 (5) 40 (102)
95 (2.4) 114 (2.9) 2 (6) 46 (116)
107 (2.7) 129 (3.3) 3 (7) 51 (131)
119 (3.0) 143 (3.6) 3 (7) 57 (145)
143 (3.6) 172 (4.4) 3 (9) 69 (174)
180 (4.6) 216 (5.5) 4 (11) 86 (218)
240 (6.1) 288 (7.3) 6 (15) 114 (290)
300 (7.6) 361 (9.2) 7 (18) 143 (363)
360 (9.2) 433 (11.0) 9 (22) 171 (435)
Lens center
c
Side view
Top view
b
a
The screen
If 16:9 aspect ratio
16
9
a [inch (m)]
Min. Max.
b
c
Screen Size [inch (m)]
[inch (cm)] [inch (cm)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
38 (1.0) 46 (1.2) 2 (4)
51 (1.3) 61 (1.6) 2 (5)
64 (1.6) 77 (2.0) 3 (6)
77 (2.0) 93 (2.4) 3 (8)
90 (2.3) 109 (2.8) 4 (9)
104 (2.6) 125 (3.2) 4 (10) 43 (110)
117 (3.0) 140 (3.6) 5 (12) 49 (124)
130 (3.3) 156 (4.0) 5 (13) 54 (137)
156 (4.0) 188 (4.8) 6 (15) 65 (165)
196 (5.0) 235 (6.0) 8 (19) 81 (206)
261 (6.6) 314 (8.0) 10 (26) 108 (275)
327 (8.3) 393 (10.0) 13 (32) 135 (343)
393 (10.0) 472 (12.0) 15 (39) 162 (412)
16 (41)
22 (55)
27 (69)
32 (82)
38 (96)
c
Lens center
Side view
b
a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION • Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate “Product Safety Guide”.
ATTENTION Precautions to observe when connecting other devices to the projector
• Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the “Technical” for the pin assignment of connectors and
RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
• Some cables have to be used with core set. Use the accessory cable or a designated-
type cable for the connection. For cables that have a core only at one end,
connect the core to the projector.
• Secure the screws on the connectors and tighten.
Indicates the
corresponding
reference page
DVD players
11
10 Laptop computers
VCRs
11
Desktop computers
10
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
Projector Port
Connection Cables
RGB cable
RGB input
rgb
with D-sub 15-pin shrink jack and
inch thread screws
AUDIO input
(from the computer)
audio
Audio cable with stereo mini jack
RS-232C communication
S-video input
control
s-video
RS-232C cable
S-video cable
with mini DIN 4-pin jack
Video input
video
Audio/video cable
component video Y
component video CB/PB
component video CR/PR
audio L
Component video input
Component video cable
Audio input
Audio/video cable or
(from video equipment)
Audio cable with RCA jack
audio R
NOTE
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the rgb port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector,
be sure to activate the laptop's RGB external image output (set the laptop to CRT
display or to simultaneous LCD and CRT display). For details on how this is done,
please refer to the instruction manual of the corresponding laptop computer.
A
B
B
A
Laptop computer
Desktop computer
NOTE
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a DVD Player
A A A
C
B B B
A
B
C
S-VIDEO cable
If using a S-video
connection
If using an audio/video
connection
If using a component
video connection
DVD player
Connecting to a VCR
A A A
B
A
B
S-VIDEO cable
If using a S-video
connection
VCR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL
Putting batteries into the remote control unit
CAUTION Precautions to observe in regards to the batteries
Always handle the batteries with care and use them only as directed. Improper use may result in
battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
•
•
Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.
When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Remove the battery cover
1
Slide back and remove the battery cover in the direction of the
arrow.
Insert the batteries
2
Align and insert the two AA Alkaline batteries (that came
with the projector) according to their plus and minus
terminals (as indicated in the remote control).
Close the battery cover
3
Replace the battery cover in the direction of the arrow and
snap it back into place.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the remote control
• The remote control works with both
the projector's front and rear remote
sensors.
• The range of the remote sensor on
the front is 3 meters with a 90-degree
range (45 degrees to the left and
right of the remote sensor), and back
is 3 meters with a 60-degree range.
• Since the remote control uses
infrared light to send signals to the
projector (Class 1 LED), be sure to
use the remote control in an area free
from obstacles that could block the
remote control's output signal to the
projector.
ATTENTION
Precautions to observe when using the remote control
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range
(such as from an inverter fluorescent lamp), hits the projector's remote sensor, the
remote control may cease to function. Adjust the direction of the projector to keep
light from directly hitting the projector's remote sensor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING ON THE POWER
Precautions
～
8
11
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
3
ASPECT
BLANK
VOLUME
MAGNIFY
ON
Turn on the projector's power
MUTE
2
OFF
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the powerindicator will light to
FREEZE
KEYSTONE
solid orange.
power switch
Control panel
on off
powerindicator
video
rgb
reset
lamp
temp
power
keystone
menu
Press the STANDBY/ON button of remote
control or the on/off button of control panel
3
•
The projector begins warming up and the power indicator
blinks green.
• The powerindicator stops blinking
and lights to solid green once the
projector's power is completely on.
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting an Input Signal
Selecting a RGB signal
5
STANDBY/ON
Press the RGB button of the Remote control
or the rgb button of the control panel
Press this button to swich to the devices connected to
rgb port as illustrated below.
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
RGB
video
s-video
OFF
rgb
FREEZE
KEYSTONE
component video
Control panel
Selecting a VIDEO signal
on off
Press the Video button of the Remote control
or the video button of the control panel
Press this button to toggle between the devices
connected to videoport, s-videoport and component
videoport. A s illustrated below, each time you press the
VIDEO button or the video button, the projector switches
between video, s-video and component video. Select
the signal you wish to project.
video
rgb
reset
lamp
temp
power
keystone
menu
VIDEO
video
s-video
component video
Use the zoom ring to adjust the
screen size
6
7
Use the focus ring to focus the
picture
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING OFF THE POWER
Press the STANDBY/ON button of remote
1
controrol or the on/off button of control panel
The message "Power off?" will appear on the screen for approximately 5 seconds.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
OFF
FREEZE
KEYSTONE
Press the STANDBY/ON or on/off button
again(remote control or control panel)
Press the STANDBY/ON or on/off button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. The power indicator blinks orange while the lamp cools
down. (Pressing the STANDBY/ON or on/off button while the power
indicator is blinking orange has no effect.)
2
POSITION
MENU
ENTER
ESC
RESET
The system goes into the STANDBY mode after
cooling down and the power indicator stops
blinking orange and then lights to solid orange.
Check that the power indicator stops
blinking and lights to solid orange.
Switch the power switch to [O] (OFF).
When the projector has
3
Control panel
on off
video
rgb
power switch
completed powering down,
the power indicator will go off.
reset
lamp
temp
power
keystone
menu
powerindicator
NOTE
• Except in
emergencies, follow
the above-
mentioned
procedure for
turning power off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
VOLUME
Press the VOLUME button
As illustrated on the right, a dialog will
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
appear on the screen to aid you in adjusting
the volume.
ASPECT
BLANK
VOLUME
VOLUME
MAGNIFY
ON
MUTE
16
OFF
FREEZE
KEYSTONE
Press the
the volume
,
buttons to adjust
2
POSITION
MENU
Press the VOLUME button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
ENTER
ESC
RESET
VOLUME
Press this to increase the volume
Press this to decrease the volume
16
TEMPORARILY MUTING THE SOUND
Press the MUTE button
1
STANDBY/ON
As illustrated on the right, a dialog will appear on the
screen indicating that you have muted the sound. Press
the VOLUME button to close the dialog. (Even if you don't
do anything, the dialog will automatically disappear after
a few seconds.)
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
OFF
Press the MUTE button again to restore the sound.
FREEZE
KEYSTONE
VOLUME
MUTE
POSITION
MENU
ENTER
ESC
RESET
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE POSITION
Press the POSITION button
As illustrated on the right, a dialog will appear on the screen
to aid you in adjusting the position.
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
POSITION
OFF
FREEZE
KEYSTONE
POSITION
POSITION
MENU
ENTER
Use the
the position
When you want to initialize the position, press the RESET
button during adjustment.
,
,
,
buttons to adjust
2
ESC
RESET
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for rgb input.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTOMATIC ADJUSTMENT FEATURE
Press the AUTO button
1
AUTO
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
Automatic Adjustment for RGB Input
MUTE
Horizontal position (H. POSIT), vertical position (V.
POSIT), clock phase (H. PHASE) and horizontal size (H.
SIZE) are automatically adjusted.
OFF
FREEZE
KEYSTONE
Make sure that the application window is set to its
maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
POSITION
MENU
ENTER
ESC
RESET
Automatic Adjustment for Video Input
The signal type best suited for the respective input
signal is selected automatically.
This feature is available only if VIDEO is set to AUTO in
the INPUT menu.
NOTE
The automatic adjustment operation requires approximately 10 seconds. Also, please
note that it may not function correctly with some input signals.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CORRECTING KEYSTONE DISTORTIONS
Press the KEYSTONE button
KEYSTONE
1
As illustrated on the right, a dialog will appear
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
on the screen to aid you in correcting the
distortion.
ASPECT
BLANK
VOLUME
KEYSTONE
MAGNIFY
ON
MUTE
OFF
16
FREEZE
KEYSTONE
POSITION
MENU
Use the
distortion
,
buttons to correct the
2
ENTER
Press the KEYSTONE button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
ESC
RESET
NOTE
• This function may not be work well with some types of input signals.
• The adjustable range for correcting keystone distortions will vary with the type of
input signal.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MAGNIFY FEATURE
Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
MAGNIFY
1
ON
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
Press the POSITION button, then use the
,
,
2
MUTE
,
buttons to select the area to enlarge and then
press the POSITION button again to confirm your
selection
OFF
FREEZE
KEYSTONE
POSITION
POSITION
POSITION
MENU
ENTER
ESC
RESET
Press the
out of the selected area.
,
buttons to zoom in and
3
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
NOTE
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
FREEZING THE SCREEN
Press the FREEZE button
MAGNIFY
ON
VOLUME
1
FREEZE
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
MUTE
OFF
FREEZE
KEYSTONE
POSITION
MENU
NOTE
•
•
The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SIGNAL SEARCHING
Press the SEARCH button
1
When you press the SEARCH button, the projector begins
searching for input signals. If it detects an input signal, the
search will cease and the projector will project the detected
signal. If the projector is unable to find an input signal at any of
its ports, it will return to the state it was in prior to the search.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
OFF
SEARCH
rgb
video
FREEZE
KEYSTONE
s-video
component video
SELECTING THE ASPECT RATIO
Press the ASPECT button
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
rgb in, component video
(HDTV signals : 1125i (1035i/1080i), 750p)
OFF
FREEZE
KEYSTONE
4:3
16:9
video in, s-video in, component video
POSITION
MENU
(Non-HDTV signals : 525i, 525p,625i)
ENTER
4:3
16:9
SMALL
ESC
RESET
TEMPORARILY BLANKING THE SCREEN
Press the BLANK button
1
The input signal screen is shut off, and a blank screen
appears. You can set the blank screen using the menu
(from the SCREEN menu, select BLANK). Press the BLANK
button again to remove the blank screen, and return to the
input signal screen.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
MUTE
OFF
FREEZE
KEYSTONE
BLANK
POSITION
MENU
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU FUNCTIONS
MENU
Press the MENU button
The menu display appears on the screen. The
1
STANDBY/ON
projector has the following menus: MAIN,
PICTURE-1, PICTURE-2, INPUT, SCREEN, and
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
OPTION. Select a menu using the
/
buttons. The
MAGNIFY
ON
current settings of the items that can be manipulated via the
selected menu appear.
MUTE
OFF
FREEZE
KEYSTONE
/
Select a menu using the
then press the
buttons,
2
or ENTER button.
The display of the selected menu appears.
POSITION
MENU
ENTER
[ex. Adjusting SHARPNESS]
Use the
the
/
buttons to select PICTURE-1, then press
ESC
RESET
or ENTER button.
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
–1
+1
–1
+1
–1
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
ENTER
: SELECT
/
Select an item using the
or ENTER button.
buttons, then press the
3
The operation display of the selected item appears. To adjust a numerical value,
press the
or ENTER button again to switch to the single menu (small display
showing only the operation display area).
[ex. Adjusting SHARPNESS]
Use the
press the
/
buttons to select SHARPNESS, then
or ENTER button.
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
ENTER
0
: SELECT
/
Press the
buttons to adjust the level.
4
Press the MENU button to hide the menu and finish your operation. Alternatively,
press the
[ex. Adjusting SHARPNESS]
Use the buttons to adjust the SHARPNESS.
or ESC button to return to the previous display.
/
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIFUNCTIONAL SETTINGS
This device has 6 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT,
SCREEN, OPTION. Each of these menus is operated using the same methods.
The basic operations of these menus are as follows.
Menu screen display : Press the "MENU" button.
Menu selection
: Choose a menu name using the
/
button, and press the
button or the ENTER button.
Item selection
: Choose an item using the
button or the ENTER button.
/
button, and press the
Return menu to last previous screen: Press the
button or the ESC button.
Execution of settings and/or adjustments Operate by using the
:
/
button. (For further
details, read the explanation for each separate menu.)
I
nitialization of settings and/or adjustments: During operation, press the RESET button.
(Note that items whose functions are
performed simultaneously with the operation
of clock phase, language selection, automatic
adjustment, etc., cannot be initialized.)
End menu operations: Press the MENU button, or do not perform any operation for
several seconds.
MENU
MAIN
BRIGHT
CONTRAST
ASPECT
PICT. POSIT.
GAMMA
MIRROR
MAIN Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
With the MAIN menu, the seven items shown in the Table below can be
performed.
LANGUAGE
12
Perform each operation in accordance with the instructions in the Table.
: SELECT
Example : MAIN Menu
(BRIGHT)
MAIN Menu
Item
Description
BRIGHT
Adjust Brightness: Light
⇔
Dark
CONTRAST
Adjust Contrast: Strong
⇔
Weak
Select Aspect Ratio:
At rgb Input or Hi-Vision 1125i(1035i/1080i)/750p of component video
Input:
ASPECT
4:3
At video Input, s-video Input or 525i/525p/625i of component video Input:
4:3 16:9 SMALL
⇔
16:9
⇔
⇔
• The SMALL picture may not be displayed correctly with certain input signals.
Select Picture Position (for 16:9/SMALL Picture):
PICT.POSIT.
GAMMA
TOP
⇔
CENTER
⇔
BOTTOM
DYNAMIC
V:INVERT
Select Gamma Mode:
NORMAL CINEMA
⇔
⇔
Select Mirror Status:
NORMAL H:INVERT
MIRROR
⇔
⇔
⇔
H&V:INVERT
Select Menu Language:
ENGLISH
⇔
FRANÇAIS
⇔
DEUTSCH
⇔
ESPAÑOL
LANGUAGE
⇔
ITALIANO
⇔
NORSK
⇔
NEDERLANDS
⇔
日本語
⇔
POTUGUÊS
⇔
中文
⇔
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
PICTURE-1 Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
With the PICTURE-1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
12
: SELECT
Example : PICTURE-1 Menu
(COLOR BAL R)
PICTURE-1 Menu
Item
Description
Adjust Red Color Balance: Dark
Adjust Blue Color Balance: Dark
Adjust Sharpness (for VIDEO/S-VIDEO): Clear
Adjust COLOR (for video/s-video/component video):
COLOR BAL R
⇔
Light
Light
COLOR BAL B
SHARPNESS
⇔
⇔
Soft
COLOR
TINT
Dark Light
⇔
Adjust Tint (for video/s-video): Green
⇔
Red
MENU
MAIN
V POSITION
PICTURE-2 Menu
PICTURE-1
PICTURE-2
INPUT
H POSITION
H PHASE
H SIZE
SCREEN
OPTION
With the PICTURE-2 menu, the four items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
12
: SELECT
Example : PICTURE-2 Menu
(V POSITION)
PICTURE-2 Menu
Item
Description
Adjust Vertical Position (for rgb): Up
Adjust Horizontal Position (for rgb): Left
Adjust Horizontal Phase (for rgb/component video):
V POSITION
H POSITION
⇔
Down
Right
⇔
H PHASE
H SIZE
Right Left
• Adjust to eliminate flicker.
⇔
Adjust Horizontal Size (for rgb): Large
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
⇔
Small
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIFUNCTIONAL SETTINGS (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
VIDEO
HDTV
SYNC ON G
EXECUTE
INPUT Menu
SCREEN
OPTION
With the INPUT menu, the four items shown in the Table below can be
performed. With inputting of rgb in signal, the horizontal and vertical
frequencies of the signal will be displayed on the initial screen of the
: SELECT
Example : INPUT Menu
(AUTO)
INPUT menu.
Perform each operation in accordance with the instructions in the Table.
INPUT Menu
Item
Description
Auto Adjust (for rgb): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for video/s-video): Automatically selects the proper VIDEO
mode for the current input signal. This function is active only when the AUTO
mode is selected for the item VIDEO. Refer to the description for the item
VIDEO below.
AUTO
• This function may not be available with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
•
For component video, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select Mode of Signal Type (for video/s-video):
AUTO
⇔
NTSC
M-PAL
⇔
PAL
⇔
SECAM
⇔
NTSC4.43
⇔
⇔
N-PAL
Selecting AUTO mode activates and performs the AUTO function for video/s-
video. It automatically selects the proper mode from among those above.
Use this function if the image becomes unstable with video/s-video. (e.g.
The image becomes irregular, or lacks color.)
VIDEO
• AUTO mode may not function correctly with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
•
For component video, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select HDTV Signal Mode:
1080i 1035i
⇔
HDTV
• If the selected HDTV mode is incompatible with the input signal, the picture
may be distorted.
On/Off SYNC ON G Mode:
TURN ON
⇔
TURN OFF
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
allows reception of SYNC on G.
SYNC ON G
• In the SYNC ON G mode, the picture may be distorted with certain input
signals. In such a case, remove the signal connector so that no signal is
received and turn SYNC ON G off, and then reconnect the signal.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU
MAIN
BLANK
START UP
SCREEN Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
With the SCREEN menu, the two items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
: SELECT
Example : SCREEN Menu
(BLANK)
SCREEN Menu
Item
Description
Selection of BLANK Screen:
.
.
⇔
.
.
⇔
.
.
The BLANK Screen may be voluntarily selected. The BLANK Screen is
displayed when the screen has been erased (i.e., made to vanish) by
manipulating the BLANK button (please refer to the “Temporarily Blanking the
Screen” section).
BLANK
Option screens: Various colored non-patterned (plain) screens displayed
within the Menus.
Selection of START UP Screen:
TURN ON
⇔
TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is
displayed when no signal has been inputted, or when spec signals are being
inputted.
TURN ON: Existing standard screens. Please make confirmation using the
actual screen(s).
START UP
TURN OFF: A non-patterned (plain) blue color screen.
• Note that if TURN OFF is selected the blank screen is displayed in blue when
there is no signal.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIFUNCTIONAL SETTINGS (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
VOLUME
OPTION Menu
AUTO OFF
WHISPER
LAMP TIME
FILTER TIME
With the OPTION menu, the five items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
12
: SELECT
Example : OPTION Menu
(VOLUME)
OPTION Menu
Item
Description
VOLUME
Adjust Volume: High
⇔
Low
Adjust AUTO OFF Time:
Long (MAX. 99 min.)
⇔
Short (Min. 1 min.)
⇔
(DISABLE: 0 min.)
AUTO OFF
WHISPER
The system automatically enters the standby mode if no signal is received
within the set time. This function is inactive when DISABLE (0 min.) is selected.
Select WHISPER Mode:
NORMAL
⇔
WHISPER
When WHISPER is selected the WHISPER mode is activated. In the WHISPER
mode, acoustic noise and screen brightness are reduced.
Refer to LAMP TIME: When set, this function displays the total time the
projector lamp has been used since new.
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the lamp with a
LAMP TIME
new lamp, select RESET on the menu with the
button.
• Do not reset the lamp time unless you have replaced the lamp. And, always
reset the lamp time when replacing the lamp. The message functions will not
operate properly if the lamp time is not reset correctly.
• Before replacing the lamp, carefully read the descriptions headed "THE
LAMP".
Refer to FILTER TIME: This function displays the total time the air-filter has
been used since new.
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while filter time is being
displayed. The reset menu will then appear. After you replace the filter, select
FILTER TIME
RESET on the menu with the
RESET CANCEL
button.
⇔
• Do not reset the filter time unless you have cleaned or replaced the filter. And,
always reset the filter time when cleaning or replacing the filter. The message
functions will not operate properly if the filter time is not reset correctly.
•
Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
28
Download from Www.Somanuals.com. All Manuals Search And Download.
THE LAMP
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately:
78-6969-9463-7 for S40 / 78-6969-9565-9 for X40), then contact your local dealer.
Before replacing the lamp, turn off the power, and unplug the power
cord, then wait at least 45 minutes, in order to ensure that the lamp is
WARNING
properly cooled. Removing the lamp bulb while it is still hot could cause burns, or cause
the lamp bulb to burst.
The LCD projector uses a glass lamp bulb. It is a mercury lamp with high
WARNING
internal pressure. High-pressure mercury lamps can break with a loud
bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a
different lifetime, and some may burst or burn out soon after you start using them. In
addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing,
and for gas containing mercury to escape from the projector’s vent holes.
•
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
34
If the replace lamp indicator (see "Related Messages" (
) and "Regarding the
35
indicator Lamps" (
)) comes on, replace the lamp as soon as possible. Using the
lamp for long periods of time, or past the replacement date, could cause it to burst. Do
not use old (used) lamps; this is a cause of breakage.
•
•
•
If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems
elsewhere besides the lamp. If this happens, contact your local dealer.
If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make
sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.
If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet, and make sure to request a replacement lamp from your local dealer. Note that
shards of glass could damage the projector’s internals, or cause injury during handling, so
please do not try to clean the projector or replace the lamp yourself.
•
Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used
bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.
• Do not use the projector with the lamp door removed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods of time, the image could become
darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps
early. If the lamp indicator turns red, or a message prompts you to replace the lamp when you power up
34
the projector, the lamp needs to be replaced. (See "Related Messages" (
) and "Regarding the
35
Indicator Lamps" (
) for details.)
Turn off the projector, and unplug the
unolug the power cord.
Insert the new lamp, and tighten the 1
screw firmly to lock it in place
1
5
•
Also steadily push the opposite side of the
screwed side of the
Allow the lamp bulb to cool for at
least 45 minutes, and prepare a new
lamp.
lamp into the unit.
After making sure that the projector has
cooled adequately, slowly flip over the
projector, so that the bottom is facing up
2
3
Unscrew the 2
screws, and
remove the
lamp door
Replace the lamp
door, and tighten
the 2 screws firmly
to lock it in place
6
Unscrew the 1 screw, and slowly pull
out the lamp by the handle
Slowly turn the projector so that
the top is facing up
4
7
8
•
Be careful not to touch the inside of the lamp case.
Turn on the projector power, and using
the menu, reset the lamp timer
•
To reset the lamp timer, from the OPTION
menu, select LAMP TIME. (See “OPTION
menu” (
) for details.)
28
ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.
• Do not use with lamp door removed.
•
Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing
the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.
• When the lamp has been replaced after the message of "CHANGE THE LAMP ...THE POWER
WILL TURN OFF AFTER 0 hr." is displayed, or the lamp indicator is red, complete the following
operation within 10 minutes of switching power ON.
NOTE
• The lamp indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power
ON again. If the lamp indicator is still red, replace the lamp.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the lamp indicator and
temp indicator blink red simultaneously, or a message prompts you to clean the air
filter when you turn on the unit, the filter needs to be cleaned. (See "Related
34
35
Messages" (
) and "Regarding the Indicator Lamps" (
) for details.)
Turn off the projector, and unplug the power cord
1
2
After making sure that the
projector hascooled adequately,
slowly flip over the projector, so
that the bottom is facing up
Air Filter
Remove the air filter
Clean the air filter and
3
4
Air Filter
ventilation openings
Ventilation
openings
with a vacuum cleaner
Insert the air filter
5
6
7
Slowly turn the projector so that the top is facing up
Turn on the projector, and use the menu to reset the filter
timer
• To reset the air filter timer, from the OPTION menu, select FILTER TIME.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the air filter
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be
replaced. Please contact your local dealer, after confirming the model of your
separately sold replacement air filter.
Turn off the projector, and unplug the power cord. Prepare a
new air filter (one specified for your projector)
1
After making sure that the
2
projector has cooled adequately,
slowly flip over the projector,
so that the bottom is facing up
Remove the air filter
3
Air Filter
Insert the new filter
4
Slowly turn the projector so that the top is facing up
5
Turn on the projector power, and using the menu, reset the
6
filter timer
• To reset the air filter timer, from the OPTION menu, select FILTER TIME.
• Make sure to turn off the power and unplug the power cord before caring for
WARNING
the unit. Please carefully read "Product Safety Guide", in order to care for your projector correctly.
• Do not use with air filter cover removed.
• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause
malfunction. The power is automatically turned off in order to prevent the unit from overheating
internally.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years. Never try to care for the inside of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a
neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly
with a soft, dry cloth.
WARNING • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Product Safety Guide" in this manual, in order to care for your
projector correctly.
• Do not use cleaners or chemicals other than those listed above, including benzene and paint
thinner.
• Do not use aerosols or sprays.
NOTE
Do not polish or wipe with hard objects.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the unit's power is ON, messages such as those shown below may be displayed. When
any such message is displayed on the screen, please respond as described below.
Message
Description
CHANGE THE LAMP
Preparation of a new lamp, and an early lamp change, is
recommended. After you have changed the lamp, please be
sure to reset the lamp timer.
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
(Note 1)
Lamp usage time is approaching 2,000 hours. A lamp change
within ＊＊ hours is recommended. (Note 2)
When lamp usage reaches 2,000 hours, the power will
automatically be turned OFF. Please change the lamp by
29
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER ＊＊ hr.
referring to “THE LAMP”.
After you have
changed the lamp, please be sure to reset the lamp
(Note 1)
timer.
28
As lamp use has reached 2,000 hours, the power will soon be
automatically turned OFF. (Note 2)
CHANGE THE LAMP
Please immediately turn the power OFF, and follow the
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
instructions in the “THE LAMP”,
29
THE POWER WILL TURN OFF
AFTER 0 hr.
After you have changed the lamp, please be sure to reset the
lamp timer.
28
A note of precaution when cleaning the air filter.
After cleaning the filter, operate FILTER TIME of the OPTION
CLEAN THE AIR FILTER
AFTER CLEANING AIR FILTER,
RESET THE FILTER TIMER.
Menu, and perform reset of the filter timer.
28
There is no input signal.
Please confirm the signal input connection, and the status of the
signal source.
NO INPUT IS DETECTED
ON ＊＊＊
The horizontal or vertical wavelength of the inputted signal is
outside of the response parameters of this unit. Please confirm
the specs for this unit or the signal source specs.
SYNC IS OUT OF RANGE
fH
fV
ON ＊＊＊
＊＊＊＊＊ kHz
＊＊＊＊＊ Hz
The internal portion temperature is rising. Please turn the power
OFF, and allow the unit to cool down for approximately 20
minutes. After having confirmed the following items, then please
resent the power to ON.
CHECK THE AIR FLOW
•
•
•
Is there blockage of the air passage aperture?
Is the air filter dirty?
Does the peripheral temperature exceed 35°C?
NOTES
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be
reappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of
usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped
with an automatic shut-down function, such that the power will automatically be turned OFF
when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp
types, there are major differences in product lifetimes; a lamp may thus fail to light even prior
to the functioning of the automatic shut-down function of this unit.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)
Regarding the Indicator Lamps
Lighting and flashing of the power indicator, the lamp indicator, and the
temp indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
power
lamp
temp
Description
indicator indicator indicator
The orange
Turned OFF Turned OFF
The STANDBY mode is set
lamp is lighted (Not lighted) (Not lighted)
Flashing of the green lamp
The green lamp is lighted
Flashing of the orange lamp
Turned OFF
Turned OFF
Turned OFF
Turned OFF
Turned OFF
Turned OFF
The unit is warming up. Please wait.
The unit is in an ON state. Ordinary operations may be performed.
The unit is cooling down. Please wait.
The unit is cooling down. Please wait.
Blinking of the
red lamp
A certain error has been detected. Wait until the power indicator lamp has finished
flashing, and then perform the proper response measure using the item descriptions
below as reference.
-
-
The lamp does not light.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please change the lamp.
The red lamp
is lighted, or
blinks
The red lamp
is lighted
Turned
OFF
Either there is no lamp and/or lamp door, or either of these has not been properly fixed
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has
sufficiently cooled down, please make confirmation of the attachment state of the lamp and
lamp door. After performing any needed maintenance, turn the power ON again; if the same
display is displayed, then please contact a sales store or a service company.
The red lamp
is lighted, or
blinks
Blinking of the
red lamp
Turned
OFF
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the
main unit has cooled down, please make confirmation that no foreign matter has become caught in
the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display
is displayed, then please contact a sales store or a service company.
The red lamp
is lighted, or
blinks
Blinking of the
red lamp
Turned
OFF
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
The red lamp is
lighted, or
blinks
The red lamp is
lighted
Turned
OFF
There is a possibility that the interior portion has become overcooled. Please use the unit within
the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
The green lamp
is lighted
Alternative blinking
with the red lamp
This is a notification that it is time to clean the filter.
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform
reset of the FILTER TIME.
The green
Simultaneous blinking
with the red lamp
lamp is lighted
NOTE
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF, and the
indicator lamps may also be turned OFF. Press the “○” (power OFF) side of the main power switch, and wait for approximately 20
minutes. Please then use the unit only after having first confirmed that the unit has sufficiently cooled down.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Reference
Page(s)
Phenomenon
Cases not involving a machine defect
Items to be confirmed
The main power source is not ON.
Turn on the main power.
3, 14
The electrical power cord is not plugged in.
Correctly connect the power cord.
Be sure to press the “
of the main power switch, and leave this OFF
interrupted during operation, such as by for approximately 20 minutes. After the unit
O” (power OFF) side
Power does not
come ON
The main power source has been
14
a power outage (blackout), etc.
has sufficiently cooled down, turn ON the
power source.
The input changeover settings
are mismatched.
Select the input signal, and
correct the settings.
15
No sound or
pictures are
outputted
No signal is being inputted.
Correctly connect the connection cord.
Correctly connect the connection cord.
Adjust the VOLUME setting to a higher level.
10, 11
10, 11
17
The electrical wiring to this unit
is not correctly connected.
Pictures are
displayed, but no
sounds are heard
The volume setting has been set at (or
adjusted to) an extremely low level.
Press the MUTE button to release
(change) the MUTE mode setting.
The MUTE mode is the current setting.
17
The electrical wiring to this unit
is not correctly connected.
Sounds are
heard, but no
pictures are
Correctly connect the connection cord.
10, 11
24
The brightness setting has been set at Adjust the BRIGHT setting to a
(or adjusted to) an extremely low level.
displayed
brighter level.
Colors have a faded-
out appearance
Color tone is poor
Perform picture adjustments by changing the
COLOR BAL R, the COLOR BAL B, and/or the
TINT settings, etc.
Color depth setting or color tone setting
25
The brightness setting and/or contrast
setting has not been properly adjusted.
Perform picture adjustments by changing the
BRIGHT and/or CONTRAST settings, etc.
24
28
The WHISPER mode is the current Change (by releasing) from the
setting. WHISPER mode.
Pictures appear
dark
Lamp is approaching the end of its Exchange the old lamp with a new
24, 25
product lifetime.
Pictures appear Either the FOCUS setting or the H
PHASE is not properly adjusted.
lamp.
Adjust the FOCUS and H PHASE settings.
15, 25
blurry
NOTE
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of
liquid crystal displays, and such do not constitute or imply a machine defect.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
NOTE • This specifications are subject to change without notice.
Item
Specification
Product name
Liquid crystal projector
1.8 cm (0.7 type)
Panel size
Liquid
crystal
panel
Drive system
TFT active matrix
S40：480,000 pixels (800 horizontal x600 vertical)
X40：786,432 pixels (1024 horizontal x 768 vertical)
Pixels
Lens
Zoom lens F=2.0 ~ 2.3 f=18 ~ 21 mm
Lamp
150 W UHB
Speaker
1.0W
Power supply
Power consumption
Temperature range
Size
AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
240W
0 ~ 35°C (Operating)
316 (W) x 105 (H) x 254 (D) mm
2.9 kg
Weight (mass)
RGB Port
AUDIO Ports
rgb in .............................1
VIDEO Ports
video in ...........................1
s-video in .......................1
component video
audio in(R, L) .................1
audio in...........................1
CONTROL Port
Ports
control ............................1
(Y, CB/PB,CR/PR)......1
Dimension Diagram
316
31
Unit : mm
37
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Acccessories..................................................................................Part Number
UHB lamp, 150W (S40) ..................................................................78-6969-9463-7
UHB lamp, 150W (X40) ..................................................................78-6969-9565-9
Air Filter ..........................................................................................78-8118-........-..
Power cord (US) .............................................................................78-8118-8102-4
Power cord (UK) .............................................................................78-8118-8101-6
Power cord (Europe).......................................................................78-8118-8103-2
VGA cable ......................................................................................78-8118-8708-8
RCA component cable ....................................................................78-8118-8843-3
RCA audio/video cable....................................................................78-8118-3234-0
Stereo mini-cable ............................................................................78-8118-8846-6
Remote control................................................................................78-8118-........-..
Soft case .......................................................................................78-6969-9203-7
Not Included with Basic Packet....................................................Part Number
Ceiling mount ................................................................................78-6969-9206-0
Adjustable height suspension ........................................................78-6969-8312-7
Shipping case ................................................................................78-6969-9204-5
S-Video cable ................................................................................78-8118-3238-1
RS-232C control cable ..................................................................78-8118-3312-4
Mac adapter ....................................................................................78-8118-3308-2
Deluxe Mouse Emulation Kit .......................................................... 78-6969-9233-4
How to Order
Please order these parts through your dealer, or contact 3M Customer Service at the
following number :
In U.S. or Canada : 1-800-328-1371
In other locations,contact your local 3M sales office.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Intended Use
Before operating this machine, please read this entire manual thoroughly. The 3MTM Multimedia Projectors are designed, built, and tested for use indoors,
using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.
The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equipment
and/or create a potentially unsafe operating condition.
3M Multimedia projectors and Wall Display Systems are designed to operate in a normal office environment.
•
•
•
16˚ to 29˚C (60˚ to 85˚ F)
10- 80 %RH (without condensation)
0- 1828 m (0-6000 feet) above sea level
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can affect the operation or performance of the
projector.
Use of this product in adverse conditions will void the product warranty.
Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only
transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call
us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.
3M Austin Center
3M Canada
3M Mexico, S.A. de C.V.
3M Europe
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000
P.O. Box 5757
London, Ontario
N6A 4T1
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico
Boulevard de l'Oise
95006 Cerge Pontoise Cedex
France
Litho in Japan
© 3M 2003
78-xxxx-xxxx-x Rev. A
DN00571 (QR58621_OG_ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
