Welcome
Quick start guide
1
Connect
Install
2
3
Enjoy
philips
What’s in the box
Power adaptor for
base
Handset
Base station
Line cord*
2 Ni-MH recharge-
able AAA batteries
750 mAh
Battery door
Belt clip
User manual
*You may find in the box the line adaptor
delivered separately from the line cord. In
this case, please plug first this line adapter
onto the line cord before connecting it to
the line socket.
Quick start guide
Guarantee
Make sure you have all these items in the box. For missing item(s), contact your
dealer.
In multi-handset packs, you will find additional handsets, chargers, power supplies,
and batteries.
Warning :
!
Always use the cables and batteries provided in the box.
Connect
1
Connect the base station
A
●
●
Insert the plug of the power
cord into the socket on the
bottom of the base station.
Insert the plug of the line
cord into the socket on the
bottom of the base station.
Plug the power supply unit
into your power outlet.
Plug the line cord into the
line socket.
●
●
OR
Install
2
Always use rechargeable batteries.
Charge handset for
24 hours
Insert batteries
A
B
●
Place the two rechargeable
batteries (included) into the
battery compartment.
Slide the battery door firmly
into place.
If the batteries are completely
exhausted, the handset will
not be able to power-on
immediately. Handset may get
warm during initial charge.
This is normal.
●
Only use rechargeable
batteries
Enjoy
3
Make a call
Press and dial the number.
Answer a call
Press
.
TIP :You can predial the number before seizing the line.
During a call, press
to turn on and off the handset loudspeaker.
Adjust the audio volume while on line
End a call
Press
.
Press
or
to increase or
decrease the audio volume.
Set the handset ring melody in standby mode
1. Press and hold
until you see the current melody name.
2. Select the desired melody by pressing digit keys 0 to 9.
3. Press
to confirm.
Change the ringing volume in standby mode
1. Press and hold until you see the current melody name.
to increase or decrease the volume level.
to confirm.
2. Press
3. Press
or
If the ringing volume level is set to OFF,
appears.
Save a name and a number in a direct access memory
1. Enter the number in standby mode.
2. Press and hold one of the direct memory keys
or
or
3. Enter the name.
4. Press and hold the same memory key to save the name.
.
Save a name and a number in an extra memory
1. Enter the number in standby mode.
2. Press and hold one of the digit keys (1 to 9).
3. Enter the name.
4. Press and hold the same digit key to save the name.
To insert a pause press and hold
, P is is shown.
View phonebook memory
Press one of the direct memory keys
OR
or
or
press and hold one of the digit keys (1 to 9).
The name and number will be shown.
Call from phonebook memory
Press
while viewing a memory.The saved number is dialed.
If the number is longer than 12 digits, only the last 12 digits are shown on
display.
Troubleshooting
For detailed overview see user manual.
Problem
Tip
●
●
No dial tone.
Check the connections.
Use the line cord provided in the
box.
●
●
●
Poor audio quality.
Try to place the base station at
least one metre away from any
electrical appliances.
●
●
●
No symbol on the display.
Make sure the product is plugged.
Charge the batteries.
●
●
●
The handset does not charge.
Check base/charger connections.
Check that the batteries are
inserted correctly.
●
●
Caller ID does not display.
Caller ID service may not be acti-
vated. Check with your service
provider.
Need help?
User manual
See the user manual that came with your XL340.
Online help
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner.
Document order number: 3111 285 33951
|