Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 2309m
HP 2309v
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Quantity
of items
included
Item Description
Notes
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
4
{Backlight
Assembly (I
type)
Liquid Crystal Displays (LCD) with a surface greater Includes background illuminated displays with gas
1
than 100 sq cm
discharge lamps
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
27
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
1
(C854
location)
External electrical cables and cords
Gas Discharge Lamps
3
4
0
0
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
0
0
EL-MF877-00
Page
1
Template Revision A
Disassembly Flowchart for HP 2309 Model
Issue Date: Dec. 31, 2008
Initiator: Candy Zheng
Photo
Action
Tool
Lay the Monitor on the desk.
N/A
Remove the VESA mounting cover with
hand.
N/A
Unlock the 4 screws which they fix the
VESA mounting by #2 scewdriver.
#2 Crossing Screw Driver
Unlock the 4 screws which they fix the
stand by 2# screwdriver.
#2 Crossing Screw Driver
Remove the front bezel out with hand.
N/A
Remove the back cover out with hand.
N/A
Unlock the 6 screws which fix the
speaker grill ,and take the sub-bezel out.
#2 Crossing Screw Driver
Take the keypad out.
N/A
Unlock the 2 screws which fix the
chassis and panel, and then pull the
LVDS out .
#2 Crossing Screw Driver
Unlock 2 screws for DVI port, D-SUB
port, Power port, and 7 screws which
they fix between chassis PCA boards,
power board and IF board. Pull the wires
out.
#2 Crossing Screw Driver and
#1 Bushing Screw Driver
Unlock the 2 screws which they fix
between the bottom-side and the base,
and then unlock the 12 screws which
they fix between the base and base-
cover.
#2 Crossing Screw Driver
Remove the arm-rear and then unlock
the 4 screws which they fix between the
arm-front and the rion.
#2 Crossing Screw Driver
The panel
N/A
Technical Notification
- Sequence of Module Disassembly for Lamp Separation –
( LTM230HT01 )
DATE : Oct. 08, 2008
Application Engineering 1 ,
HD development, LCD Business
Any of information, data and/or records in these documents shall be treated as “CONFIDENTIAL” and no copy thereof shall be
allowed without sender's prior written authorization. The disclosure of these documents shall be made to those who have need to
know or are intended to know.
Sequence of Module Disassembly for Lamp Separation
LTM230HT01 Module front and rare side
Disassemble top chassis and PCB cover
1 / 3
Sequence of Module Disassembly for Lamp Separation
Disassemble the panel from the Mold frame
Disassemble the mold frame, sheets and diffuser plate from the bottom chassis
2 / 3
Sequence of Module Disassembly for Lamp Separation
Separate side mold to pull out lamp
Separate lamp from backlight
3 / 3
Method of lamp disassembly on LM230WF1-TLA3/TLB3
Step 1 : Rear side view
Step 2 : Unfix the screws (3 Points)
Step4 : Separate wires from the tape
Step 3 : Remove the Cover Shield
PDF created with pdfFactory trial version www.pdffactory.com
Method of lamp disassembly on LM230WF1-TLA3/TLB3
Step5 : Dismantle the case top(Down)
Step6 : Dismantle the case top(left/right)
Step7 : Separate case top(push the case
top because of damages on COF)
Step8 : Separate Board Assy
PDF created with pdfFactory trial version www.pdffactory.com
Method of lamp disassembly on LM230WF1-TLA3-731
Step9 : Unfix the BL Screw
Step10 : remove S/Main
Step11 : remove the Optical Sheets
Step12 : remove the LGP
PDF created with pdfFactory trial version www.pdffactory.com
Method of lamp disassembly on LM230WF1-TLA3-731
Step13 : remove lamp wire tapes
(left/right)
Step14 : Separate wires from Cover bottom
Step15 : Separate Lamp holder(H) from
holder Guide of Cover bottom
Step16 : Separate Lamp holde(G) from
holder Guide of Cover bottom.
PDF created with pdfFactory trial version www.pdffactory.com
Method of lamp disassembly on LM230WF1-TLA3-731
Final : Lamp Assy
PDF created with pdfFactory trial version www.pdffactory.com
|