P5WD2
Premium
Contents
Notices................................................................................................ vi
Safety information ............................................................................. vii
About this guide ............................................................................... viii
P5WD2 Premium specifications summary............................................ x
Chapter 1: Product introduction
1.1
1.2
1.3
Welcome!.............................................................................. 1-1
Package contents ................................................................. 1-1
Special features.................................................................... 1-2
1.3.1
1.3.2
1.3.3
Product highlights................................................... 1-2
ASUS AI Life features ............................................. 1-6
Innovative ASUS features ....................................... 1-7
Chapter 2: Hardware information
2.1
2.2
Before you proceed .............................................................. 2-1
Motherboard overview.......................................................... 2-2
2.2.1
2.2.2
2.2.3
2.2.4
2.2.5
Placement direction ................................................ 2-2
Screw holes ............................................................ 2-2
ASUS Stack Cool 2 ................................................. 2-3
Motherboard layout ................................................ 2-4
Layout contents ..................................................... 2-5
2.3
2.4
Central Processing Unit (CPU) .............................................. 2-7
2.3.1
2.3.2
2.3.3
Installing the CPU.................................................... 2-8
Installing the CPU heatsink and fan ......................2-10
Uninstalling the CPU heatsink and fan ..................2-12
System memory .................................................................2-14
2.4.1
2.4.2
2.4.3
2.4.4
Overview...............................................................2-14
Memory configurations .........................................2-14
Installing a DIMM ...................................................2-18
Removing a DIMM .................................................2-18
2.5
Expansion slots...................................................................2-19
2.5.1
2.5.2
2.5.3
2.5.4
2.5.5
2.5.6
Installing an expansion card..................................2-19
Configuring an expansion card..............................2-19
Interrupt assignments ..........................................2-20
PCI Express x16 slots ...........................................2-21
PCI slots................................................................2-22
PCI Express x1 slot ...............................................2-22
2.6
2.7
Jumper ...............................................................................2-23
Connectors .........................................................................2-24
2.7.1
2.7.2
Rear panel connectors ..........................................2-24
Internal connectors...............................................2-26
iii
Contents
Chapter 3: Powering up
3.1
3.2
Starting up for the first time................................................ 3-1
Powering off the computer .................................................. 3-2
3.2.1
3.2.2
Using the OS shut down function ........................... 3-2
Using the dual function power switch .................... 3-2
Chapter 4: BIOS setup
4.1
Managing and updating your BIOS ........................................ 4-1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
Creating a bootable floppy disk.............................. 4-1
AFUDOS utility ........................................................ 4-2
ASUS CrashFree BIOS 2 utility ................................ 4-5
ASUS EZ Flash utility .............................................. 4-7
ASUS Update utility ................................................ 4-8
4.2
BIOS setup program ...........................................................4-11
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.2.8
4.2.9
BIOS menu screen.................................................4-12
Menu bar...............................................................4-12
Navigation keys ....................................................4-12
Menu items ...........................................................4-13
Sub-menu items ...................................................4-13
Configuration fields ..............................................4-13
Pop-up window .....................................................4-13
Scroll bar ..............................................................4-13
General help ..........................................................4-13
4.3
Main menu ..........................................................................4-14
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
4.3.6
4.3.7
System Time.........................................................4-14
System Date .........................................................4-14
Legacy Diskette A ................................................4-14
Language ..............................................................4-14
Primary, Third, and Fourth IDE Master/Slave........4-15
IDE Configuration ..................................................4-16
System Information ..............................................4-18
4.4
Advanced menu..................................................................4-19
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
JumperFree Configuration ....................................4-19
LAN Cable Status .................................................4-23
USB Configuration.................................................4-24
CPU Configuration.................................................4-25
Chipset .................................................................4-27
i v
Contents
4.4.6
4.4.7
4.5.1
Onboard Devices Configuration ............................4-29
PCI PnP .................................................................4-31
Suspend Mode ......................................................4-32
4.5
Power menu........................................................................4-32
4.5.2
4.5.3
4.5.4
4.5.5
4.5.5
4.6.1
Repost Video on S3 Resume ................................4-33
ACPI 2.0 Support..................................................4-33
ACPI APIC Support ................................................4-33
APM Configuration ................................................4-33
Hardware Monitor .................................................4-36
Boot Device Priority..............................................4-39
4.6
4.7
Boot menu ..........................................................................4-39
4.6.2
4.6.3
Boot Settings Configuration .................................4-40
Security ................................................................4-41
Exit menu ...........................................................................4-44
Chapter 5: Software support
5.1
5.2
Installing an operating system ............................................. 5-1
Support CD information........................................................ 5-1
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
Running the support CD ......................................... 5-1
Drivers menu .......................................................... 5-2
Utilities menu.......................................................... 5-5
Manuals menu ......................................................... 5-6
Contact information ............................................... 5-7
Other information ................................................... 5-7
5.3
5.4
5.5
Software information .........................................................5-10
5.3.1
5.3.2
5.3.3
ASUS MyLogo2™ ..................................................5-10
AI NET2 ................................................................5-12
Audio configurations ............................................5-13
RAID configurations ............................................................5-18
5.4.1
5.4.2
5.5.3
Installing Serial ATA hard disks.............................5-19
Intel® RAID configurations ....................................5-19
Silicon Image RAID configurations ........................5-30
Creating a RAID driver disk .................................................5-36
Appendix: CPU features
A.1
A.2
Intel® EM64T ........................................................................A-1
Enhanced Intel SpeedStep® Technology (EIST) ....................A-1
A.2.1
System requirements .............................................A-1
Using the EIST ........................................................A-2
A.2.2
A.3
Intel® Hyper-Threading Technology ......................................A-3
v
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
ICES-003.
v i
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that the
power cables for the devices are unplugged before the signal cables are
connected. If possible, disconnect all power cables from the existing
system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
Seek professional assistance before using an adpater or extension cord.
These devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you are
using, contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully read
all the manuals that came with the package.
•
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
vii
About this guide
This user guide contains the information you need when installing and
configuring the motherboard.
How this guide is organized
This user guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new
technology it supports.
•
Chapter 2: Hardware information
This chapter lists the hardware setup procedures that you have to
perform when installing system components. It includes description of
the switches, jumpers, and connectors on the motherboard.
•
•
Chapter 3: Powering up
This chapter describes the power up sequence and ways of shutting
down the system.
Chapter 4: BIOS setup
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.
•
•
Chapter 5: Software support
This chapter describes the contents of the support CD that comes
with the motherboard package.
Appendix: CPU features
The Appendix describes the CPU features and technologies that the
motherboard supports.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1 . ASUS websites
The ASUS website provides updated information on ASUS hardware
and software products. Refer to the ASUS contact information.
2 . Optional documentation
Your product package may include optional documentation, such as
warranty flyers, that may have been added by your dealer. These
documents are not part of the standard package.
viii
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete a
task.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than
sign means that you must press the enclosed key.
Example: <Enter> means that you must press
the Enter or Return key.
<Key1+Key2+Key3>
If you must press two or more keys
simultaneously, the key names are linked with a
plus sign (+).
Example: <Ctrl+Alt+D>
Command
Means that you must type the command exactly
as shown, then supply the required item or value
enclosed in brackets.
Example: At the DOS prompt, type the command
line:
afudos /i[filename]
afudos /iP5WD2P.ROM
i x
P5WD2 Premium specifications summary
CPU
LGA775 socket for Intel® Pentium® 4/Celeron processor
Compatible with Intel® PCG 05B/05A and 04B/04A
processors
Supports Intel® Enhanced Memory 64Technology (EM64T)
Supports Enhanced Intel SpeedStep® Technology (EIST)
Intel® Hyper-Threading Technology-ready
Intel® Pentium® Processor Extreme Edition-ready
Intel® Pentium® D Processor-ready
Chipset
Northbridge: Intel® 955X Memory Controller Hub (MCH)
Southbridge: Intel® ICH7R
Front Side Bus
Memory
1066/800/533 MHz
Dual-channel memory architecture
4 x 240-pin DIMM sockets support unbufferred
non-ECC/ECC DDR2-800/667/533 MHz memory
modules
Native DDR2-800 support
Up to 8 GB system memory
Supports Intel® Memory Pipeline Technology (MPT)
Expansion slots
1 x PCI Express™ x16 slot for discrete graphics card
1 x Universal PCI Express™ x16 slot (at x4 mode)
1 x PCI Express x1 slot
3 x PCI slots
Storage
Intel® ICH7R Southbridge supports:
- 1 x Ultra DMA 100/66/33 hard disk
- 4 x Serial ATA 3 Gb/s hard disks
- RAID 0, RAID 1, RAID 5, and RAID 10 configuration
- Intel® Matrix Storage Technology
Silicon Image® 3132 SATA controller supports:
- 1 x Internal Serial ATA 3 Gb/s hard disk
- 1 x External Serial ATA hard disk
- RAID 0 and RAID 1 configuration
ITE IDE controller supports:
- 2 x Ultra DMA 133/100/66 hard disks
LAN
Dual Gigabit LAN controllers:
- Intel® PCI Express™ Gigabit LAN controller
- Marvell® 88E8001 Gigabit LAN controller
- Supports Marvell® Virtual Cable Tester (VCT) technology
(continued on the next page)
x
P5WD2 Premium specifications summary
High Definition
Audio
Realtek® ALC882D 8-channel High Definition Audio (HD
Audio) CODEC featuring Dolby® Digital Live™
technology
Supports Multi-streaming, Jack-sensing, and
Jack-retasking functions
Coaxial and optical S/PDIF out ports
USB
Supports up to 8 USB 2.0 ports
IEEE 1394a
T1 1394a controller supports:
- 1 x IEEE 1394a port on the rear panel
- 1 x IEEE 1394a connector at midboard
Overclocking
features
ASUS NOS™ (Non-delay Overclocking System)
ASUS PEG Link
ASUS CPU Lock Free
Precision Tweaker:
- vDIMM: 8-step DRAM voltage control
- vCORE: Adjustable CPU voltage at 0.0125
increment
- Stepless Frequency Selection (SFS) allows FSB
tuning from 100 MHz up to 450 MHz at 1 MHz
increment
- PCI Express x16 Frequency from 100 MHz up to
200 MHz at 1 MHz increment
ASUS AI Overclocking (intelligent CPU tuner)
Adjustable FSB/DDR2 frequencies with fixed PCI/PCI
Express frequencies
ASUS Ai Booster utility
ASUS C.P.R. (CPU Parameter Recall)
ASUS AI Life
features
WiFi-TV PCI card (optional)
- Digital TV (DVB-T only), Analog TV, FM
- WiFi@home 802.11a/b/g
Stack Cool 2 patented fanless cooling technology
AI Quiet
SATA-On-The-Go external Serial ATA connector
Special features
ASUS AI NET2
ASUS Q-Fan2
ASUS CrashFree BIOS 2
ASUS Multi-language BIOS
ASUS MyLogo2
BIOS features
8 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, SM BIOS 2.3,
WfM2.0
(continued on the next page)
x i
P5WD2 Premium specifications summary
Rear panel
1 x Parallel port
1 x External Serial ATA port
1 x IEEE 1394a port
2 x LAN (RJ-45) ports
4 x USB 2.0 ports
1 x Optical S/PDIF Out port
1 x Coaxial S/PDIF Out port
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
8-channel audio ports
Powe r
Requirement
ATX power supply (with 24-pin and 2 x 4-pin 12 V plugs)
ATX 12V 2.0 compliant
Form Factor
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.4 cm)
Internal
connectors
1 x Floppy disk drive connector
1 x Primary IDE connector
2 x IDE connectors
5 x Serial ATA connectors
1 x Optical drive audio connector
1 x Front panel audio connector
2 x USB 2.0 connectors for four additional USB 2.0 ports
1 x IEEE 1394a port connector
1 x GAME/MIDI connector
1 x Serial port connector
ATX power connectors (24-pin and 2 x 4-pin)
ASUS EZ Plug™ connector
2 x Chassis fan connectors
CPU fan connector
Power fan connector
Chassis intrusion connector
System panel connector
Support CD
contents
Device drivers
ASUS Live Update
ASUS PC Probe 2
ASUS AI Booster
Microsoft® DirectX 9.0c
Adobe® Acrobat Reader®
Anti-virus software (OEM version)
*Specifications are subject to change without notice.
xii
This chapter describes the motherboard
features and the new technologies
it supports.
Product
1
introduction
Chapter summary
1
1.1
1.2
1.3
Welcome!.............................................................................. 1-1
Package contents ................................................................. 1-1
Special features.................................................................... 1-2
ASUS P5WD2 Premium
1.1 Welcome!
Thank you for buying an ASUS® P5WD2 Premium motherboard!
The motherboard delivers a host of new features and latest technologies,
making it another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it,
check the items in your package with the list below.
1.2 Package contents
Check your motherboard package for the following items.
Motherboard
I/O modules
ASUS P5WD2 Premium motherboard
1 x IEEE 1394a module
1 x 2-port USB 2.0/GAME module
1 x Serial port module
Cables
5 x Serial ATA cables
3 x Serial ATA power cables for up to five devices
2 x Ultra DMA 133/100/66 cable
1 x IDE cable
1 x FDD cable
Accessories
I/O shield
1 x GT Soft Bridge for future upgrade
Application CDs ASUS motherboard support CD
Intervideo® WinDVD® Suite (OEM version)
Documentation
User guide
If any of the above items is damaged or missing, contact your retailer.
ASUS P5WD2 Premium
1-1
1.3 Special features
1.3.1 Product highlights
Latest processor technology
The motherboard comes with a 775-pin surface mount Land Grid Array
(LGA) socket designed for the Intel® Pentium® 4 processor in the 775-land
package. The motherboard supports the Intel® Pentium® 4 processor and
the Intel® Pentium® D processor with 1066/800/533 MHz Front Side Bus
(FSB). The motherboard also supports the Intel® Hyper-Threading
Technology and is fully compatible with Intel® 05B/05A and 04B/04A
processors. See page 2-7 for details.
Intel® Dual-Core Technology CPU support
The motherboard supports dual-core processors containing two physical
CPU cores with dedicated L2 caches to meet demands for more powerful
processing. See page 2-7 for details.
Intel® 955X/ICH7R chipset
The Intel® 955X Memory Controller Hub (MCH) and the ICH7R I/O controller
hub provide the vital interfaces for the motherboard. The Intel® 955X
supports up to 8 GB dual-channel DDR2-667/533 MHz, 1066/800 FSB, PCI
Express x16 graphics, and dual-core CPU. The MCH supports the Intel®
Memory Pipeline Technology (MPT) that boosts system performance.
The Intel® ICH7R Southbridge integrates four Serial ATA ports enabled
through the Serial ATA 3 Gb/s RAID controller to ensure data security and
enable powerful multi-task processing.
Intel® Memory Pipeline Technology (MPT)
The Intel® MPT increases system-level and standard operating performance
by optimizing memory access between CPU and system memory.
Intel® EM64T
The motherboard supports Intel® Pentium® 4 CPUs with the Intel® EM64T
(Extended Memory 64 Technology). The Intel® EM64T feature allows your
computer to run on 64-bit operating systems and access larger amounts of
system memory for faster and more efficient computing. See the Appendix
for details.
1-2
Chapter 1: Product introduction
Enhanced Intel SpeedStep® Technology (EIST)
The Enhanced Intel SpeedStep® Technology (EIST) intelligently manages
the CPU resources by automatically adjusting the CPU voltage and core
frequency depending on the CPU loading and system speed or power
requirement. See page 4-26 and the Appendix for details.
DDR2 memory support
The motherboard supports DDR2 memory which features data transfer
rates of 667 MHz or 533 MHz to meet the higher bandwidth requirements
of the latest 3D graphics, multimedia, and Internet applications. The dual-
channel DDR2 architecture doubles the bandwidth of your system memory
to boost system performance, eliminating bottlenecks with peak
bandwidths of up to 10.7 GB/s. See pages 2-14 to 2-17 for details.
Dual RAID solution
Onboard RAID controllers provide the motherboard with dual-RAID
functionality.
The Intel® ICH7R allows RAID 0, RAID 1, RAID 5, and RAID 10 configuration
for four SATA connectors and supports the Intel® Matrix Storage
Technology. See pages 2-28 and 5-19 for details.
The Silicon Image® 3132 Serial ATA controller supports two additional
Serial ATA connectors for RAID 0 and RAID 1 functionality. See pages 2-29
and 5-30 for details.
PCI Express™ interface
The motherboard fully supports PCI Express, the latest I/O interconnect
technology that speeds up the PCI bus. PCI Express features point-to-point
serial interconnections between devices and allows higher clockspeeds by
carrying data in packets. This high speed interface is software compatible with
existing PCI specifications. See page 2-21 for details.
ASUS P5WD2 Premium
1-3
8-channel high definition audio
Onboard is the Realtek® ALC882D High Definition Audio 8-channel audio
CODEC. This CODEC is fully-compliant with Intel® High Definition Audio
standard (192 KHz, 24-bit audio). With the CODEC, 8-channel audio ports,
and S/PDIF interfaces, you can connect your computer to home theater
decoders to produce crystal-clear digital audio.
The Realtek® ALC882D CODEC comes with a software application that
features jack detection to monitor the plugging status of each jack,
impedance sensing to determine audio device classes, and pre-defined
equalization for various audio devices. See pages 2-24, 2-25, and 5-13 for
details.
Dolby® Digital Live
This motherboard offers theater-level 7.1 surround sound and audio
specifications higher than that of DVD. Enjoy true home theatre experience
with Dolby® Digital Live. The Realtek® ALC882D audio CODEC comes with an
AC-3 encoder capable of transforming your computer’s digital audio
contents into real-time Dolby® Digital stream. This digital stream passes
through the S/PDIF out interfaces to an AC-3 decoder for 7.1-channel
playback. See page 5-13 for details.
S/PDIF digital sound ready
The motherboard supports the S/PDIF technology through the S/PDIF
interfaces on the rear panel. The S/PDIF technology turns your computer into
a high-end entertainment system with digital connectivity to powerful audio
and speaker systems. See page 2-25 for details.
IEEE 1394a support
The motherboard supports the IEEE 1394 interface that provides
high-speed and flexible PC connectivity to a wide range of peripherals and
devices compliant to IEEE 1394 standards. The IEEE 1394 interface allows
up to 400 Mbps transfer rates through simple , low-cost, high-bandwidth
asynchronous (real-time) data interfacing between computers, peripherals,
and consumer electronic devices such as camcorders, VCRs, printers, TVs,
and digital cameras. See pages 2-25 and 2-31 for details.
1-4
Chapter 1: Product introduction
USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0
specification, dramatically increasing the connection speed from the
12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is
backward compatible with USB 1.1. See pages 2-25 and 2-31 for details.
Dual Gigabit LAN solution
The motherboard comes with dual Gigabit LAN controllers to provide the
total solution for your networking needs. These network controllers use the
PCI Express segment to provide faster data bandwidth for your wired or
wireless Internet, LAN, and file sharing requirements. See page 2-24 for
details.
ASUS P5WD2 Premium
1-5
1.3.2 ASUS AI Life features
Serial ATA II technology and SATA on the Go
The motherboard supports the Serial ATA 3 Gb/s technology through the
Serial ATA interfaces and the Intel® 955X MCH chipset. The Serial ATA 3 Gb/
s specification provides twice the bandwidth of the current Serial ATA
products with a host of new features, including Native Command Queuing
(NCQ), Power Management (PM) Implementation Algorithm, and Hot Swap.
Serial ATA allows thinner, more flexible cables with lower pin count and
reduced voltage requirements.
Leveraging these Serial ATA II features is the Serial ATA on the Go. This
external port on the rear panel I/O provides smart setup, hot-plug and
support for up to 16 devices with port-multiplier functions. See pages 2-25
and 2-29 for details.
AI Quiet
The ASUS AI Quiet function dynamically controls CPU speed and reduces
temperature and fan speeds, thus minimizing noise and ensuring quiet
operation.
WiFi-TV Card (optional)
ASUS WiFi-TV card complies with the IEEE 802.11 a/b/g wireless LAN
adapter that allows data transmission of up to 54 Mbps using the 2.4 GHz
frequency band. ASUS provides full software application support and a
user-friendly wizard to help you set up your wireless local area network
effortlessly. You can share photos, videos, and MP3 files with other wireless
devices without tangling cables and wires.
The ASUS WiFi-TV card also offers digital TV (for DVB-T only) connection,
which presents higher TV resolution and more functions compared to the
traditional analog TV standard. This multi-functional card also supports FM
radio.
1-6
Chapter 1: Product introduction
ASUS Stack Cool 2
ASUS Stack Cool 2 is an innovative fanless and zero-noise thermal solution
that provides supplementary cooling to the motherboard. Stack Cool 2 is a
special layer underneath the whole motherboard that improves heat
dissipation. Stack Cool 2 effectively lowers motherboard temperature by as
much as 20ºC. See page 2-3 for details.
1.3.3 Innovative ASUS features
Native DDR2-800 memory support
Native DDR2-800 eliminates the bottleneck when overclocking both the
CPU and the memory, thus maximizing performance for 3D graphics and
other system-intensive applications.
AI NOS™ (Non-Delay Overclocking System)
ASUS Non-delay Overclocking System™ (NOS) is a technology that
auto-detects the CPU loading and dynamically overclocks the CPU speed
only when needed. See page 4-22 for details.
AI NET2
AI NET2 is a BIOS-based diagnostic tool that detects and reports Ethernet
cable faults and shorts. With this utility, you can easily monitor the
condition of the Ethernet cable connected to the LAN (RJ-45) port. During
the bootup process, AI NET2 immediately diagnoses the LAN cable and
reports shorts and faults up to 100 meters at 1 meter accuracy. See pages
4-23 and 5-12 for details.
Fanless Design
The ASUS fanless design allows multi-directional heat flow from major
thermal sources in the motherboard to lower overall system temperature,
resulting in quieter operation and longer system life.
ASUS P5WD2 Premium
1-7
Universal PCI Express slot
The Universal PCI Express slot allows users to set up a dual graphics card
platform on a single motherboard. The ASUS Smart Switch detects PCI
Express devices installed, and intelligently reroutes the PCI Express lanes to
optimize bandwidth allocation. See page 2-21 for details.
ASUS EZ Plug™
This patented ASUS technology is a 4-pin auxiliary +12V connector that is
designed to maintain the voltage integrity of your system. This plug
guarantees adequate supply of power to the motherboard and other
installed peripherals. See page 2-34 for the illustration.
Precision Tweaker
This feature allows you to fine-tune the CPU/memory voltage and gradually
increase the Front Side Bus (FSB) and PCI Express frequency to achieve
maximum system performance.
PEG Link Mode
This feature enhances your PCI Express graphics card performance by
allowing the motherboard to automatically adjust the PCI Express graphics
link mode to the correct frequency based on the system configuration.
Four additional settings are available for overclocking the PEG Link Mode.
See page 4-28 for details.
ASUS Hyper Path 3
This feature significantly shortens latency time during data transfers,
allowing users to experience the real power of their computers. See page
4-28 for details.
CrashFree BIOS 2
This feature allows you to restore the original BIOS data from the support CD
in case when the BIOS codes and data are corrupted. This protection
eliminates the need to buy a replacement ROM chip. See page 4-5 for details.
ASUS Q-Fan 2 technology
The ASUS Q-Fan 2 technology smartly adjusts the fan speeds according to
the system loading to ensure quiet, cool, and efficient operation.
See pages 4-36 to 4-37 for details.
1-8
Chapter 1: Product introduction
ASUS Multi-language BIOS
The multi-language BIOS allows you to select the language of your choice
from the available options. The localized BIOS menus allow easier and faster
configuration. See page 4-14 for details.
ASUS MyLogo2™
This new feature present in the motherboard allows you to personalize and
add style to your system with customizable boot logos. See pages 4-40
and 5-8 for details.
CPU Lock Free
This feature allows you to adjust the CPU multiplier to 14x. Setting the
appropriate BIOS setting automatically reduces the CPU multiplier value for
more flexibility when increasing external FSB. See page 4-20 for details
ASUS P5WD2 Premium
1-9
1-10
Chapter 1: Product introduction
This chapter lists the hardware setup
procedures that you have to perform
when installing system components.
It includes description of the jumpers
and connectors on the motherboard.
Hardware
2
information
Chapter summary
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
Before you proceed .............................................................. 2-1
Motherboard overview.......................................................... 2-2
Central Processing Unit (CPU) .............................................. 2-7
System memory .................................................................2-14
Expansion slots...................................................................2-19
Jumper ...............................................................................2-23
Connectors .........................................................................2-24
ASUS P5WD2 Premium
2.1 Before you proceed
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any
component.
Use a grounded wrist strap or touch a safely grounded object or
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
•
Before you install or remove any component, ensure
that the ATX power supply is switched off or the
power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals,
and/or components.
Onboard LED
The motherboard comes with a standby power LED. The green LED lights
up to indicate that the system is ON, in sleep mode, or in soft-off mode.
This is a reminder that you should shut down the system and unplug the
power cable before removing or plugging in any motherboard component.
The illustration below shows the location of the onboard LED.
®
SB_PWR
ON
OFF
Standby
Power
Powered
Off
P5WD2 PREMIUM Onboard LED
ASUS P5WD2 Premium
2-1
2.2 Motherboard overview
Before you install the motherboard, study the configuration of your chassis
to ensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
2.2.1 Placement direction
When installing the motherboard, make sure that you place it into the
chassis in the correct orientation. The edge with external ports goes to the
rear part of the chassis as indicated in the image below.
2.2.2 Screw holes
Place nine (9) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
®
2-2
Chapter 2: Hardware information
2.2.3 ASUS Stack Cool 2
The motherboard comes with the ASUS Stack Cool 2, an innovative fan-less
and zero-noise thermal solution that provides supplementary cooling to the
motherboard. Stack Cool 2 is a special layer underneath the whole
motherboard that improves heat dissipation. Stack Cool 2 effectively
lowers motherboard temperature by as much as 20ºC.
ASUS P5WD2 Premium
2-3
2.2.4 Motherboard layout
24.5cm (9.6in)
PS/2KBMS
T: Mouse
B: Keyboard
CPU_FAN
ATX12V
SPDIF_O
SPDIF_O2
LGA775
AUDIO
CHA_FAN1
LAN1_USB12
SATA Link
PWR_FAN
LAN2_USB34
IE1394
Intel®
MCH 955X
®
Gbit
LAN
PCIEX16_1
PCI1
PCI2
®
SATA3
SATA1
SATA4
SATA2
Intel
ICH7R
PCIEX16_2
8Mb
BIOS
CLRTC
SEC_EIDE
PRI_EIDE
CD
CR2032 3V
Lithium Cell
CMOS Power
TSB43AB22A
PCIEX1_1
ALC882
PCI3
COM1
PANEL
AAFP
IE1394_2
USB56
USB78
GAME
2-4
Chapter 2: Hardware information
2.2.5 Layout contents
Slots
Page
2-14
2-21
2-21
2-22
2-22
1. DDR2 DIMM slots
2. PCI Express x16 slot
3. Universal PCI Express slot
4. PCI slots
5. PCI Express x1 slot
Jumper
Page
2-23
1. Clear RTC RAM (3-pin CLRTC)
Rear panel connectors
Page
2-24
2-24
2-24
2-24
2-24
2-24
1. PS/2 mouse port (green)
2. Parallel port
3. Center/Subwoofer port (yellow orange)
4. Side Speaker Out port (black)
5. Line In port (light blue)
6. Line Out port (lime)
7. LAN1 (RJ-45) port
2-24
2-24
2-25
2-25
2-25
2-25
2-25
2-25
2-25
2-25
2-25
8. LAN2 (RJ-45) port
9. IEEE 1394a port
10. USB 2.0 ports 3 and 4
11. USB 2.0 ports 1 and 2
12. Microphone port (pink)
13. Rear Speaker Out port (gray)
14. External SATA port
15. Optical S/PDIF Out port
16. Coaxial S/PDIF Out port
17. PS/2 keyboard port (purple)
ASUS P5WD2 Premium
2-5
Internal connectors
P
a
g
e
1. Floppy disk drive connector (34-1 pin FLOPPY)
2-26
2-26
2. IDE connectors (40-1 pin PRI_EIDE [red],
SEC_EIDE [red])
3. Primary IDE connector (40-1 pin PRI_IDE)
2-27
2-28
4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red],
SATA3 [black], SATA4 [black)
5. Serial ATA RAID connector (7-pin SATA_RAID2)
6. Optical drive audio connector (4-pin CD)
2-29
2-30
2-30
2-31
2-31
2-32
2-32
2-33
7. Front panel audio connector (10-1 pin AAFP)
8. USB connectors (10-1 pin USB56, USB78)
9. IEEE 1394a port connector (10-1 pin IE1394_2)
10. GAME/MIDI port connector (16-1 pin GAME)
11. Chassis intrusion connector (4-1 pin CHASSIS)
12. CPU, Chassis, and Power fan connectors
(4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN1,
3-pin CHA_FAN2)
13. Serial port connector (10-1 pin COM1)
2-34
2-34
14. ATX power connectors (24-pin EATXPWR1, 8-pin ATX12V1,
4-pin EZ_PLUG)
15. System panel connector (20-pin PANEL1)
2-37
•
•
•
•
•
System power LED (Green 3-pin PLED)
Hard disk drive activity LED (Red 2-pin IDE_LED)
System warnsing speaker (Orange 4-pin SPEAKER)
ATX power button/soft-off button (Yellow 2-pin PWRSW)
Reset button (Blue 2-pin RESET)
2-6
Chapter 2: Hardware information
2.3 Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA775 socket designed for
the Intel® Pentium® 4/Pentium® D processor in the 775-land package.
This motherboard supports the Intel® Pentium® Processor Extreme Edition,
the latest CPU with embedded dual physical cores and Hyper-Threading
technology, making four CPU threads possible. Refer to the table below for
the operating system support status.
OS licensing support list
Intel Dual-Core CPU support
Intel Dual-Core CPU and
Hyper-Threading Technology
support
Windows® 2000 Professional
Windows® 2000 Advanced Server
Windows® XP Home
Windows® 2000 Advanced Server
Windows® XP Home
Windows® XP Professional
Windows® XP Professional
Windows® Server 2003 - Standard,
Enterprise
Windows® Server 2003 - Standard,
Enterprise
If installing a dual-core CPU, connect the chassis fan cable to the
CHA_FAN1 connector to ensure system stability.
•
Upon purchase of the motherboard, make sure that the PnP cap is
on the socket and the socket contacts are not bent. Contact your
retailer immediately if the PnP cap is missing, or if you see any
damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process
Return Merchandise Authorization (RMA) requests only if the
motherboard comes with the cap on the LGA775 socket.
The product warranty does not cover damage to the socket
contacts resulting from incorrect CPU installation/removal, or
misplacement/loss/incorrect removal of the PnP cap.
ASUS P5WD2 Premium
2-7
2.3.1 Installing the CPU
To install a CPU:
1. Locate the CPU socket on the motherboard.
®
P5WD2 PREMIUM CPU Socket 775
Before installing the CPU, make sure that the cam box is facing towards
you and the load lever is on your left.
2. Press the load lever with your thumb (A), then move it to the left (B)
until it is released from the retention tab.
Retention tab
A
PnP cap
Load lever
B
This side of the
socket box should
face you.
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
3. Lift the load lever in the
direction of the arrow to a 135º
angle.
2-8
Chapter 2: Hardware information
4. Lift the load plate with your
thumb and forefinger to a 100º
angle (A), then push the PnP cap
from the load plate window to
remove (B).
B
A
Load plate
5. Position the CPU over
the socket, making sure
that the gold triangle is
on the bottom-left
corner of the socket.
The socket alignment
Alignment key
key should fit into the
CPU notch.
Gold triangle mark
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
A
6. Close the load plate (A), then
push the load lever (B) until
it snaps into the retention
tab.
B
7. If installing a dual-core CPU,
connect the chassis fan cable
to the CHA_FAN1 connector
to ensure system stability.
The motherboard supports Intel® Pentium® 4 LGA775 processors with
the Intel® Enhanced Memory 64 Technology (EM64T), Enhanced Intel
SpeedStep® Technology (EIST), and Hyper-Threading Technology. Refer
to the Appendix for more information on these CPU features.
ASUS P5WD2 Premium
2-9
2.3.2 Installing the CPU heatsink and fan
The Intel® Pentium® 4 LGA775 processor requires a specially designed
heatsink and fan assembly to ensure optimum thermal condition and
performance.
•
When you buy a boxed Intel® Pentium® 4 processor, the package
includes the CPU fan and heatsink assembly. If you buy a CPU
separately, make sure that you use only Intel®-certified
multi-directional heatsink and fan.
•
•
Your Intel® Pentium® 4 LGA775 heatsink and fan assembly comes in
a push-pin design and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make
sure that you have properly applied Thermal Interface Material to the
CPU heatsink or CPU before you install the heatsink and fan
assembly.
Make sure that you have installed the motherboard to the chassis before
you install the CPU fan and heatsink assembly.
To install the CPU heatsink and fan:
1. Place the heatsink on top of
the installed CPU, making sure
that the four fasteners match
the holes on the motherboard.
Orient the heatsink and fan
assembly such that the CPU
fan cable is closest to the
CPU fan connector.
Motherboard hole
Fastener
Narrow end
of the groove
Make sure to orient each fastener with the narrow end of the groove
pointing outward. (The photo shows the groove shaded for emphasis.)
2-10
Chapter 2: Hardware information
2. Push down two fasteners at a
time in a diagonal sequence to
secure the heatsink and fan
assembly in place.
B
B
A
A
A
B
B
A
3. Connect the CPU fan cable to the connector on the motherboard
labeled CPU_FAN.
CPU_FAN
®
P5WD2 PREMIUM CPU fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
ASUS P5WD2 Premium
2-11
2.3.3 Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1. Disconnect the CPU fan cable
from the connector on the
motherboard.
2. Rotate each fastener
counterclockwise.
3. Pull up two fasteners at a time
in a diagonal sequence to
B
disengage the heatsink and fan
A
assembly from the
A
motherboard.
B
A
B
B
A
4. Carefully remove the heatsink
and fan assembly from the
motherboard.
2-12
Chapter 2: Hardware information
5. Rotate each fastener clockwise
to ensure correct orientation
when reinstalling.
Narrow end of the groove
The narrow end of the
groove should point outward
after resetting. (The photo
shows the groove shaded for
emphasis.)
Refer to the documentation in the boxed or stand-alone CPU fan
package for detailed information on CPU fan installation.
ASUS P5WD2 Premium
2-13
2.4 System memory
2.4.1 Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline
Memory Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are
notched differently to prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:
®
P5WD2 PREMIUM 240-pin DDR2 DIMM sockets
Channel
Sockets
Channel A
Channel B
DIMM_A1 and DIMM_A2
DIMM_B1 and DIMM_B2
2.4.2 Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2
DIMMs into the DIMM sockets.
•
For dual-channel configuration, the total size of memory module(s)
installed per channel must be the same (DIMM_A1 + DIMM_A2 =
DIMM_B1 + DIMM_B2).
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR2 Qualified Vendors List on
the next page for details.
•
•
Due to chipset resource allocation, the system may detect less than
8 GB system memory when you installed four 2 GB DDR2 memory
modules.
This motherboard does not support memory modules made up of
128 Mb chips or double sided x16 memory modules.
2-14
Chapter 2: Hardware information
Important notes on memory limitations
•
Due to chipset limitation, this motherboard can only support up to
8 GB on the operating systems listed below. You may install a
maximum of 2 GB DIMMs on each slot, but only DDR2-533 2 GB
density modules are available for this configuration.
32-bit
64-bit
Windows® 2000 Advanced
Server
Windows® Server 2003
Enterprise Edition
Windows® Server 2003 Standard
x64 Edition
Windows® XP Professional x64
Edition
Windows® Server 2003
Enterprise x64 Edition
•
Some old-version DDR2-667 DIMMs may not match Intel®’s
On-Die-Termination (ODT) requirement and will automatically
downgrade to run at DDR2-533. If this happens, contact your
memory vendor to check the ODT value.
ASUS P5WD2 Premium
2-15
Qualified Vendors Lists
DDR2-667
DIMM support
D D R 2
S i z e
Vendor
M o d e l
B r a n d
Side(s) Component
A
B
C
256 MB
512 MB
256 MB
512 MB
256 MB
1024 MB
1024 MB
512 MB
1024 MB
512 MB
512 MB
1024 MB
512 MB
512 MB
256 MB
512 MB
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
Kingston
Kingston
Hynix
M378T3253FZ0-CE6
M378T6453FZ0-CE6
M391T3253FZ0-CE6
M391T6453FZ0-CE6
HYB18T512800AF3S
E5108AE-GE-E
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
Kingston
Kingston
Hynix
SS
DS K4T56083QF-ZCE6
SS K4T56083QF-ZCE6
DS K4T56083QF-ZCE6
SS KVR667D2N5/512
K4T56083QF-ZCE6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS KVR667D2N5/1G
HYMP512U64AP8-Y5
HYMP564U72AP8-Y5
HYMP512U64AP8-Y4
HYMP564U64AP8-Y4
DS HY5PS12821AFP-Y5
Hynix
Hynix
SS
DS HY5PS12821AFP-Y4
SS HY5PS12821AFP-Y4
HY5PS12821AFP-Y5(ECC)
Hynix
Hynix
Hynix
Hynix
MICRON
MICRON
MICRON
Infineon
ELPIDA
ELPIDA
MT16HTF6464AY-667B4 MICRON
MT16HTF12864AY-667A2 MICRON
MT16HTF6464AY-667B3 MICRON
DS 4VB41D9CZM
DS 4UAIID9CWX
DS 4TB41D9CZM
HYS64T64000HU-3S-A
EBE25UC8ABFA-6E-E
EBE51UD8AEFA-6E-E
Infineon
ELPIDA
ELPIDA
SS
SS
SS
HYB18T512800AF3S
E2508AB-GE-E
E5108AE-GE-E
Side(s): S S - Single-sided D S - Double-sided
DIMM support:
A - Supports one module inserted into either slot, in Single-channel memory configuration.
B - Supports one pair of modules inserted into either the yellow slots or the black slots as
one pair of Dual-channel memory configuration.
C - Supports two pairs of modules inserted into both the yellow and black slots as two pairs
of Dual-channel memory configuration.
Visit the ASUS website for the latest DDR2-667 with lower latency
Qualified Vendors List.
2-16
Chapter 2: Hardware information
DDR2-533
D D R 2
DIMM support
S i z e
Vendor
M o d e l
B r a n d
Side(s) Component
A
B
C
512 MB
256 MB
512 MB
1024 MB
512 MB
512MB
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
Infineon
Infineon
Infineon
Infineon
CORSAIR
MICRON
MICRON
MICRON
MICRON
MICRON
Kingston
Kingston
Kingston
Hynix
M378T6553BG0-CD5
M378T3253FG0-CD5
M378T6453FG0-CD5
M391T2953BG0-CD5
M391T6453FG0-CD5
N/A
N/A
N/A
N/A
N/A
SS
SS
K4T51083QB-GCD5
K4T56083QF-GCD5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS K4T56083QF-GCD5
DS K4T51083QB-GCD5(ECC)• •
DS K4T56083QF-GCD5(ECC)•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HYS64T64000GU-3.7-A Infineon
HYS64T32000HU-3.7-A Infineon
HYS64T128020HU-3.7-A Infineon
HYS64T64000HU-3.7-A Infineon
SS
SS
HYB18T512800AC37
HYB18T512160AF-3.7
•
•
•
•
•
•
•
•
•
•
•
•
•
•
256 MB
1024 MB
512 MB
512 MB
512 MB
256 MB
512 MB
1024 MB
1024 MB
1024 MB
256 MB
512 MB
512 MB
1024 MB
1024 MB
512 MB
512 MB
512 MB
512 MB
1024 MB
DS HYB18T512800AF37
SS
DS
HYB18T512800AF37
N/A
CM2X512-4200
MT16HTF6464AG-53EB2 MICRON
MT8HTF3264AY-53EB3 MICRON
N/A
DS 4FBIID9BQM
SS 4FBIID9CHM
MT16HTF6464AY-53EB2 MICRON
MT18HTF12872AY-53EA1MICRON
MT16HTF12864AY-53EA1MICRON
DS 4FBIID9CHM
DS 4MAIID9CRZ(ECC)
DS 4MAIID9CRZ
KVR533D2N4/1G
KVR533D2N4/256
KVR533D2N4/512
HYMP564U648-C4
HYMP512U728-C4
HYMP512U648-C4
HYMP564U728-C4
EBE51ED8ABFA-5C-E
EBE51UD8ABFA-5C
EBE51UD8ABFA-5C-E
EBE11UD8ABFA-5C-E
N/A
N/A
DS E5108AB-5C-E
SS
SS
SS
HYB18T512160AC-3.7
E5108AB-5C-E
ELPIDA
N/A
HY5PS12821F-C4
Hynix
N/A
DS HY5PS12821F-C4(ECC) •
Hynix
N/A
DS HY5PS12821F-C4
SS HY5PS12821FP-C4(ECC)
•
•
•
•
•
•
Hynix
N/A
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
DS E5108AB-5C-E (ECC)
DS E5108AB-5C-E
DS E5108AB-5C-E
DS E5108AB-5C-E
ELPIDA
ELPIDA
ELPIDA
Side(s): S S - Single-sided D S - Double-sided
DIMM support:
A - Supports one module inserted into either slot, in Single-channel memory configuration.
B - Supports one pair of modules inserted into either the yellow slots or the black slots as
one pair of Dual-channel memory configuration.
C - Supports two pairs of modules inserted into both the yellow and black slots as two pairs
of Dual-channel memory configuration.
Visit the ASUS website for the latest DDR2-533 Qualified Vendors List.
ASUS P5WD2 Premium
2-17
2.4.3 Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both
the motherboard and the components.
2
To install a DIMM:
DDR2 DIMM notch
3
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
1
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
Unlocked retaining clip
•
•
A DDR2 DIMM is keyed with a notch so that it fits in only one
direction. Do not force a DIMM into a socket to avoid damaging the
DIMM.
The DDR2 DIMM sockets do not support DDR DIMMs. DO not install
DDR DIMMs to the DDR2 DIMM sockets.
2.4.4 Removing a DIMM
To remove a DIMM:
2
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly
with your fingers when
pressing the retaining
clips. The DIMM might get
damaged when it flips out
with extra force.
1
DDR2 DIMM notch
1
2. Remove the DIMM from the socket.
2-18
Chapter 2: Hardware information
2.5 Expansion slots
In the future, you may need to install expansion cards. The following
sub-sections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing
expansion cards. Failure to do so may cause you physical injury and
damage motherboard components.
2.5.1 Installing an expansion card
To install an expansion card:
1. Before installing the expansion card, read the documentation that
came with it and make the necessary hardware settings for the card.
2. Remove the system unit cover (if your motherboard is already
installed in a chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep
the screw for later use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
2.5.2 Configuring an expansion card
After installing the expansion card, configure the it by adjusting the
software settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 4 for information on BIOS setup.
2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments. Otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable. Refer to the table on the next page for
details.
ASUS P5WD2 Premium
2-19
2.5.3 Interrupt assignments
Standard interrupt assignments
I R Q
Priority
Standard Function
0
1
2
System Timer
1
Keyboard Controller
2
—
11
12
13
14
15
3
Re-direct to IRQ#9
3
Communications Port (COM2)*
Communications Port (COM1)*
IRQ holder for PCI steering*
Floppy Disk Controller
4
5
6
7
Printer Port (LPT1)*
8
System CMOS/Real Time Clock
IRQ holder for PCI steering*
IRQ holder for PCI steering*
IRQ holder for PCI steering*
PS/2 Compatible Mouse Port*
Numeric Data Processor
Primary IDE Channel
9
4
10
11
12
13
14
15
5
6
7
8
9
10
Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
PCI slot 1
—
—
—
—
—
—
—
—
—
—
—
—
shared
—
—
shared
—
—
—
PCI slot 2
PCI slot 3
—
—
—
—
shared
—
Onboard IDE
Onboard 1394
Onboard LAN2
PCIE x16
—
—
—
shared —
—
—
—
—
—
—
—
—
—
—
—
—
—
shared
shared
—
—
—
—
—
—
—
—
shared
shared
—
—
—
—
—
PCIE x16
—
—
—
—
—
PCIE x1
—
—
shared —
— shared
—
—
—
USB controller 1
USB controller 2
USB controller 3
USB controller 4
USB 2.0 controller
Serial ATA
—
—
—
—
—
—
—
shared
—
—
—
—
—
—
—
—
—
—
shared
—
—
—
—
—
—
shared —
— shared
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
shared
—
IDE
—
—
—
—
shared
—
Azalia
—
—
—
shared —
—
—
2-20
Chapter 2: Hardware information
2.5.4 PCI Express x16 slots
This motherboard has two PCI
Express x16 slots that support PCI
Express x16 graphic cards
complying with the PCI Express
specifications. With two graphics
cards installed, the motherboard can
enable quad-display.
Universal PCI
Primary PCI Express x 16
Express slot
[x4 mode] (black)
slot for discrete graphics
card (blue)
We recommend that you install a VGA card on the primary (blue) PCI
Express slot, and install any other PCI Express device on the Universal
PCI Express slot (black).
Primary PCI Express x16
slot
The primary PCI Express x16
graphics card supports PCI Express
x16 graphic cards that comply with
the PCI Express specifications.
Universal PCI Express slot
(x4 mode)
This motherboard also supports a
Universal PCI Express slot with a
maximum speed of 2 GB/s. The
operating frequency of this slot changes, depending on the type of PCI
Express card you install. Refer to the table on the next page for details.
The figure shows two graphics cards installed on the primary PCI Express
x16 slot and the Universal PCI Express slot.
If you install two VGA cards, we recommend that you plug the rear
chassis fan cable to the motherboard connector labeled CHA_FAN1 for
better thermal environment. See page 2-33 for the connector location.
ASUS P5WD2 Premium
2-21
Options for Universal
PCI Express slot
PCI Express operating speed
Auto
Automatically optimizes performance
and functionality according to devices
installed
x4 mode [Faster]
x2 mode [Fast]
User gets the best performance
but this mode disables the PCI Express
x1 slot
Always runs at PCI Express x2 speed
•
•
Some PCI Express graphics cards cannot operate on x4/x2 mode.
We suggest that you install these cards on the primary PCI Express
slot (blue) to increase system stability.
Some PCI Express devices cannot operate on x4/x2 mode. We
suggest that you install these devices on the PCI Express slot x1
slot.
2.5.5 PCI slots
The PCI slots support cards such as
a LAN card, SCSI card, USB card, and
other cards that comply with PCI
specifications. The figure shows a
LAN card installed on a PCI slot.
2.5.6 PCI Express x1 slot
This motherboard supports PCI
Express x1 network cards, SCSI
cards and other cards that comply
with the PCI Express specifications.
The following figure shows a
network card installed on the PCI
Express x1 slot.
2-22
Chapter 2: Hardware information
2.6 Jumper
1 . Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system
setup parameters by erasing the CMOS RTC RAM data. The onboard
button cell battery powers the RAM data in CMOS, which include
system setup information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the
cap on pins 2-3 for about 5~10 seconds, then move the cap back
to pins 1-2.
4. Reinstall the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC
jumper default position. Removing the cap will cause system boot failure!
CLRTC
®
1
2
2
3
Normal
Clear CMOS
(Default)
P5WD2 PREMIUM Clear RTC RAM
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
ASUS P5WD2 Premium
2-23
2.7 Connectors
2.7.1 Rear panel connectors
1
2
3 4 5 6
7
8
17
16
15
14
13 12
11
10 9
1 . PS/2 mouse port (green). This port is for a PS/2 mouse.
2 . Parallel port. This 25-pin port connects a parallel printer, a scanner,
or other devices.
3 . Side Speaker Out port (black). This port connects the side
speakers in an 8-channel audio configuration.
4 . Center/Subwoofer port (yellow orange). This port connects
the center/subwoofer speakers.
5 . Line In port (light blue). This port connects a tape, CD, DVD
player, or other audio sources.
6 . Line Out port (lime). This port connects a headphone or a
speaker. In 4-channel, 6-channel, and 8-channel configuration, the
function of this port becomes Front Speaker Out.
7 . LAN1 (RJ-45) port. This Intel® LAN port allows Gigabit connection
to a Local Area Network (LAN) through a network hub. Refer to the
table below for the LAN port LED indications.
8 . LAN2 (RJ-45) port. This Marvell® LAN port allows Gigabit
connection to a Local Area Network (LAN) through a network hub.
Refer to the table below for the LAN port LED indications.
LAN port LED indications
ACT/LINK SPEED
ACT/LINK LED
Status Description
SPEED LED
L E D
L E D
Status
OFF
Description
OFF
No link
Linked
10 Mbps connection
GREEN
BLINKING
ORANGE 100 Mbps connection
1 Gbps connection
Data activity GREEN
LAN port
2-24
Chapter 2: Hardware information
9 . IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed
connectivity for audio/video devices, storage peripherals, PCs, or
portable devices.
10. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus
(USB) ports are available for connecting USB 2.0 devices.
11. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus
(USB) ports are available for connecting USB 2.0 devices.
12. Microphone port (pink). This port connects a microphone.
13. Rear Speaker Out port (gray). This port connects the rear
speakers on a 4-channel, 6-channel, or 8-channel audio configuration.
Refer to the audio configuration table below for the function of the
audio ports in 2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
2-channel
(Headset)
4-channel
6-channel
8-channel
Line In
Light Blue
Lime
Line In
Line In
Line In
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink
Mic In
—
Mic In
Mic In
Mic In
Gray
Rear Speaker Out Rear Speaker Out
Rear Speaker Out
Side Speaker Out
Black
—
—
—
—
Yellow Orange
—
Center/Subwoofer Center/Subwoofer
14. External SATA port. This port is for the Serial ATA signal cable for
a Serial ATA hard disk drive.
15. Optical S/PDIF Out port. This port connects an external audio
output device via an optical S/PDIF cable.
16. Coaxial S/PDIF Out port. This port connects an external audio
output device via a coaxial S/PDIF cable.
17. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
ASUS P5WD2 Premium
2-25
2.7.2 Internal connectors
1 . Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other
end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection
when using a FDD cable with a covered Pin 5.
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
®
PIN 1
P5WD2 PREMIUM Floppy disk drive connector
2 . ITE IDE connectors (40-1 pin PRI_EIDE [red], SEC_EIDE
[red])
These connectors are for Ultra ATA 133/100/66 signal cables. The
ITE IDE connectors support up to four IDE hard disk drives for easier
data storage.
SEC_EIDE
PIN 1
®
PRI_EIDE
PIN 1
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
P5WD2 PREMIUM IDE connectors
The connectors do not support ATAPI devices.
2-26
Chapter 2: Hardware information
3 . ICH7 Primary IDE connector (40-1 pin PRI_IDE)
This connector is for an Ultra DMA 100/66 signal cable. The Ultra
DMA 100/66 signal cable has three connectors: a blue connector for
the primary IDE connector on the motherboard, a black connector for
an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive),
and a gray connector for an Ultra DMA 100/66 IDE master device (hard
disk drive). If you install two hard disk drives, you must configure the
second drive as a slave device by setting its jumper accordingly. Refer
to the hard disk documentation for the jumper settings.
•
Pin 20 on the IDE connector is removed to match the covered hole
on the Ultra DMA cable connector. This prevents incorrect insertion
when you connect the IDE cable.
•
Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.
®
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
P5WD2 PREMIUM IDE connector
ASUS P5WD2 Premium
2-27
4 . ICH7 Serial ATA connectors (7-pin SATA1 [red],
SATA2 [red], SATA3 [black], SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0 or
RAID 0, RAID 1, RAID 5, RAID 10 configuration with the Intel® Matrix
Storage Technology through the onboard Intel® ICH7R RAID controller.
Refer to Chapter 5 for details on how to set up Serial ATA RAID
configurations.
•
These connectors are set to Standard IDE mode by default. In
Standard IDE mode, you can connect Serial ATA boot/data hard
disk drives to these connectors. If you intend to create a Serial ATA
RAID set using these connectors, set the Configure SATA As
item in the BIOS to [RAID]. See section “4.3.6 IDE Configuration” on
page 4-16 for details.
•
For RAID 5, use at least three hard disk drives. For RAID 10, use at
least four hard disk drives. Use two to four Serial ATA hard disk
drives for each RAID 0 or RAID 1 set.
SATA3
SATA1
SATA4
SATA2
®
P5WD2 PREMIUM SATA connectors
Important notes on Serial ATA
•
You must install Windows® 2000 Service Pack 4 or the Windows® XP
Service Pack 1 before using Serial ATA hard disk drives. The Serial
ATA RAID feature (RAID 0/RAID 1/RAID 5/RAID 10) is available only
if you are using Windows® 2000/XP.
•
When using the connectors in Standard IDE mode, connect the
primary (boot) hard disk drive to the SATA1 or SATA2 connector.
Refer to the table on the next page for the recommended SATA hard
disk drive connections.
2-28
Chapter 2: Hardware information
Serial ATA hard disk drive connection
Connector
Color
Setting
U s e
SATA1/SATA2
SATA3/SATA4
Red
Master
Slave
Boot disk
Data disk
Black
5 . Silicon Image® Serial ATA RAID connector
(7-pin SATA_RAID2)
This connector is for a Serial ATA signal cable. This connector
supports a Serial ATA hard disk drive that you can configure for RAID
through the onboard Serial ATA RAID controller. Refer to Chapter 5
for details on how to set up Serial ATA RAID configurations.
The Silicon 3132 Controller item in the BIOS is set to [SATA2 Mode] by
default, allowing you to enable the hot-plug function for the external
device. Set to [RAID Mode] to use the connectors to build a RAID set.
See section “4.4.6 Onboard Devices Configuration” for details.
SATA_RAID2
G N D
®
A T _ R X R N S 2 A
A T _ R X R P S 2 A
G N D
A T _ T X N R 2 S A
A T _ T X P R 2 S A
G N D
P5WD2 PREMIUM SATA RAID connector
•
Before creating a RAID set using Serial ATA hard disks, make sure
that you have connected the Serial ATA signal cables and installed
Serial ATA hard disk drives; otherwise, you cannot enter the Silicon
Image RAID utility and SATA BIOS setup during POST.
•
The Sil3132 controller can support RAID 5 and RAID 10 function
only when you use the external Serial ATA device with port-multiplier
function.
ASUS P5WD2 Premium
2-29
6 . Optical drive audio connector (4-pin CD)
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.
®
CD
(black)
P5WD2 PREMIUM Internal audio connector
Enable the CD-IN function in the audio utility when using this
connector.
7 . Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module
that supports either HD Audio or legacy AC’97 audio standard.
®
AC ‘97 audio
pin definition
AAFP
P5WD2 PREMIUM Analog front panel connector
•
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail the motherboard high-definition
audio capability.
By default, this connector is set to legacy AC’97 audio. If you want
to connect a high-definition front panel audio module to this
connector, set the Front Panel Support Type item in the BIOS
Setup to [HD Audio]. See page 4-29 for details.
2-30
Chapter 2: Hardware information
8 . USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB/GAME
module cable to any of these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
®
USB56
USB78
1
1
P5WD2 PREMIUM USB 2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
9 . IEEE 1394a port connector (10-1 pin IE1394_2 [orange])
This connector is for an additional IEEE 1394 port. Connect the IEEE
1394 module cable (orange) to this connector, then install the
module to a slot opening at the back of the system chassis.
®
1
IE1394_2
P5WD2 PREMIUM IEEE 1394 connector
Never connect a USB port module cable to the IEEE 1394
connector. Doing so will damage the motherboard!
ASUS P5WD2 Premium
2-31
10. GAME/MIDI port connector (16-1 pin GAME)
This connector is for a GAME/MIDI port. Connect the USB/GAME
module cable to this connector, then install the module to a slot
opening at the back of the system chassis. The GAME/MIDI port
connects a joystick or game pad for playing games, and MIDI devices
for playing or editing audio files.
®
GAME
P5WD2 PREMIUM Game connector
11. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
®
CHASSIS
(Default)
P5WD2 PREMIUM Chassis intrusion connector
2-32
Chapter 2: Hardware information
12. CPU, Chassis, and Power Fan connectors (4-pin CPU_FAN,
3-pin PWR_FAN, 3-pin CHA_FAN1, 3-pin CHA_FAN2)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W
max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12V. Connect the
fan cables to the fan connectors on the motherboard, making sure that
the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the
fan connectors!
CPU_FAN
CHA_FAN1
PWR_FAN
GND
+12V
Rotation
CPU_FAN
CHA_FAN1
PWR_FAN
®
CHA_FAN2
GND
+12V
Rotation
CHA_FAN2
P5WD2 PREMIUM Fan connectors
Only the CPU_FAN and CHA_FAN1 connectors support the
ASUS Q-Fan 2 feature.
If you install two VGA cards, we recommend that you plug the rear
chassis fan cable to the motherboard connector labeled CHA_FAN1 for
better thermal environment.
ASUS P5WD2 Premium
2-33
13. Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
PIN 1
®
COM1
P5WD2 PREMIUM COM port connector
14. ATX power connectors (24-pin EATXPWR1, 8-pin ATX12V1,
4-pin EZ_PLUG)
These connectors are for ATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
EATXPWR
ATX12V
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
Ground
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
®
+5 Volts
EZ_PLUG
+5V
Ground
EZ_DET
GND
+5 Volts
Ground
+3 Volts
+3 Volts
+12V
P5WD2 PREMIUM ATX power connectors
When installing two VGA cards using a 20-pin ATX PSU with +12V
capability, we recommend that you connect the EZ Plug for sufficient
power. Refer to the PSU documentation for dual VGA power
requirements.
2-34
Chapter 2: Hardware information
•
•
You may use a 4-pin ATX12V
power plug for this connector.
ATX12V
Make sure to remove the cap on
the connector before connecting
an 8-pin EPS +12V power plug.
Remove the cap
before using an
8-pin power plug
•
Use only either a 4-pin ATX12V or
an 8-pin EPS +12V power plug.
Connecting other power plug types
may serious damage to the
system.
Connect a
4-pin power
plug here
Important notes on motherboard power requirements
•
For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 400 W.
•
•
Do not forget to connect the 8-pin/4-pin ATX12 V power plug;
otherwise, the system will not boot up.
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
To support an Intel® Dual-Core CPU Extreme Edition up to 3.2 GHz,
make sure that the PSU can provide at least 16 A on the +12V_2
lead. The vendors list below is provided for your reference.
Power Supply Unit Vendors List
Vendor
ASUS
M o d e l
Max. Power (W)
A-40GA
400
400
400
450
450
450
460
485
500
550
Delta
GPS-400AA-100 A
HP-E4008FWR
GPS-450AA-100 A
A-45GA
Hipro
Delta
ASUS
AcBel
API4PC04
Seventeam
Enermax
AcBel
ST-460EAD-05F
EG495AX-VE
API4PC23
AcBel
API4PC24
ASUS P5WD2 Premium
2-35
•
•
•
If you want to use two high-end PCI Express x16 graphics cards, use
a PSU with 450 to 500 W power to ensure system stability.
Make sure that the PSU can support at least 13 A on the +12V_1
lead and 8 A on the +12V_2 lead.
The ATX 12 V Specification 2.0-compliant (400 W) PSU has been
tested to support the motherboard power requirements with the
following configuration:
CPU
Memory
Graphics card
:
:
:
Intel® Pentium® 4 3.73 GHz Extreme Edition
512 MB DDR2 (x 4)
PCI Express x16 Nvidia 6600GT
IDE hard disk drive
Parallel ATA devices:
Serial ATA device
Optical drives
:
:
SATA hard disk drive (x2)
DVD-RW
2-36
Chapter 2: Hardware information
15. System panel connector (20-pin PANEL1)
This connector supports several chassis-mounted functions.
PLED
SPEAKER
PANEL
®
IDE_LED
RESET
PWRSW
*
Requires an ATX power supply.
P5WD2 PREMIUM System panel connector
The sytem panel connector is color-coded for easy connection. Refer to
the connector description below for details.
•
•
System power LED (Green 3-pin PLED)
This 3-pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
Hard disk drive activity LED (Red 2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
•
•
System warning speaker (Orange 4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
ATX power button/soft-off button (Yellow 2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
•
Reset button (Blue 2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
ASUS P5WD2 Premium
2-37
2-38
Chapter 2: Hardware information
This chapter describes the power up
sequence, the vocal POST messages,
and ways of shutting down the
system.
Powering up
3
Chapter summary
3
3.1
3.2
Starting up for the first time................................................ 3-1
Powering off the computer .................................................. 3-2
ASUS P5WD2 Premium
3.1 Starting up for the first time
1. After making all the connections, replace the system case cover.
2. Be sure that all switches are off.
3. Connect the power cord to the power connector at the back of the
system chassis.
4. Connect the power cord to a power outlet that is equipped with a
surge protector.
5. Turn on the devices in the following order:
a. Monitor
b.External SCSI devices (starting with the last device on the chain)
c. System power
6. After applying power, the system power LED on the system front
panel case lights up. For systems withATX power supplies, the system
LED lights up when you press the ATX power button. If your monitor
complies with “green” standards or if it has a “power standby”
feature, the monitor LED may light up or switch between orange and
green after the system LED turns on.
The system then runs the power-on self tests or POST. While the
tests are running, the BIOS beeps (see BIOS beep codes table below)
or additional messages appear on the screen. If you do not see
anything within 30 seconds from the time you turned on the power,
the system may have failed a power-on test. Check the jumper
settings and connections or call your retailer for assistance.
AMI BIOS beep codes
Beep Description
One beep
Error
Keyboard controller error
Refresh Time error
No master drive detected
Two continuous beeps followed by
two short beeps
Floppy controller failure
Two continuous beeps followed by
four short beeps
Hardware component failure
7. At power on, hold down the <Delete> key to enter the BIOS Setup.
Follow the instructions in Chapter 4.
ASUS P5WD2 Premium
3-1
3.2 Powering off the computer
3.2.1 Using the OS shut down function
If you are using Windows® 2000:
1. Click the Start button then click Shut Down...
2. Make sure that the Shut Down option button is selected, then click
the OK button to shut down the computer.
3. The power supply should turn off after Windows® shuts down.
If you are using Windows® XP or later version:
1. Click the Start button then select Turn Off Computer.
2. Click the Turn Off button to shut down the computer.
3. The power supply should turn off after Windows® shuts down.
3.2.2 Using the dual function power switch
While the system is ON, pressing the power switch for less than four
seconds puts the system to sleep mode or to soft-off mode, depending on
the BIOS setting. Pressing the power switch for more than four seconds
lets the system enter the soft-off mode regardless of the BIOS setting.
Refer to section “4.5 Power Menu” in Chapter 4 for details.
3-2
Chapter 3: Powering up
This chapter tells how to change
the system settings through the BIOS
Setup menus. Detailed descriptions
of the BIOS parameters are also
provided.
BIOS setup
4
Chapter summary
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Managing and updating your BIOS ........................................ 4-1
BIOS setup program ...........................................................4-11
Main menu ..........................................................................4-14
Advanced menu..................................................................4-19
Power menu........................................................................4-32
Boot menu ..........................................................................4-39
Exit menu ...........................................................................4-44
ASUS P5WD2 Premium
4.1 Managing and updating your BIOS
The following utilities allow you to manage and update the motherboard
Basic Input/Output System (BIOS) setup.
1. ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable
floppy disk.)
2. ASUS CrashFree BIOS 2 (Updates the BIOS using a bootable
floppy disk or the motherboard support CD when the BIOS file fails or
gets corrupted.)
3. ASUS EZ Flash (Updates the BIOS in DOS mode using a floppy disk
or the motherboard support CD.)
4. ASUS Update (Updates the BIOS in Windows® environment.)
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a bootable floppy
disk in case you need to restore the BIOS in the future. Copy the original
motherboard BIOS using the ASUS Update or AFUDOS utilities.
4.1.1 Creating a bootable floppy disk
1. Do either one of the following to create a bootable floppy disk.
DOS environment
a. Insert a 1.44MB floppy disk into the drive.
b. At the DOS prompt, type format A:/S then press <Enter>.
Windows® XP environment
a. Insert a 1.44 MB floppy disk to the floppy disk drive.
b. Click Start from the Windows® desktop, then select M y
Computer.
c. Select the 3 1/2 Floppy Drive icon.
d. Click File from the menu, then select Format. A Format 3 1/2
Floppy Disk window appears.
e. Windows® XP users: Select Create an MS-DOS startup
disk from the format options field, then click Start.
ASUS P5WD2 Premium
4-1
Windows® 2000 environment
To create a set of boot disks for Windows® 2000:
a. Insert a formatted, high density 1.44 MB floppy disk into the drive.
b. Insert the Windows® 2000 CD to the optical drive.
c. Click Start, then select Run.
d. In the Open field, type D:\bootdisk\makeboot a:
assuming that D is your optical drive letter.
e. Press <Enter>, then follow screen instructions to continue.
2. Copy the original or the latest motherboard BIOS file to the bootable
floppy disk.
4.1.2 AFUDOS utility
The AFUDOS utility allows you to update the BIOS file in DOS environment
using a bootable floppy disk with the updated BIOS file. This utility also
allows you to copy the current BIOS file that you can use as backup when
the BIOS fails or gets corrupted during the updating process.
Copying the current BIOS
To copy the current BIOS file using the AFUDOS utility:
•
•
Make sure that the floppy disk is not write-protected and has at
least 1.2 MB free space to save the file.
The succeeding BIOS screens are for reference only. The actual BIOS
screen displays may not be same as shown.
1. Copy the AFUDOS utility (afudos.exe) from the motherboard support
CD to the bootable floppy disk you created earlier.
2. Boot the system in DOS mode, then at the prompt type:
afudos /o[filename]
where the [filename] is any user-assigned filename not more than
eight alphanumeric characters for the main filename and three
alphanumeric characters for the extension name.
A:\>afudos /oOLDBIOS1.rom
Main filename
Extension name
4-2
Chapter 4: BIOS setup
3. Press <Enter>. The utility copies the current BIOS file to the floppy
disk.
A:\>afudos /oOLDBIOS1.rom
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading flash ..... done
Write to file...... ok
A:\>
The utility returns to the DOS prompt after copying the current BIOS
file.
Updating the BIOS file
To update the BIOS file using the AFUDOS utility:
1. Visit the ASUS website (www.asus.com) and download the latest BIOS
file for the motherboard. Save the BIOS file to a bootable floppy disk.
Write the BIOS filename on a piece of paper. You need to type the exact
BIOS filename at the DOS prompt.
2. Copy the AFUDOS utility (afudos.exe) from the motherboard support
CD to the bootable floppy disk you created earlier.
3. Boot the system in DOS mode, then at the prompt type:
afudos /i[filename]
where [filename] is the latest or the original BIOS file on the bootable
floppy disk.
A:\>afudos /iP5WD2P.rom
ASUS P5WD2 Premium
4-3
4. The utility verifies the file and starts updating the BIOS.
A:\>afudos /iP5WD2P.rom
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
WARNING!! Do not turn off power during flash BIOS
Reading file ....... done
Reading flash ...... done
Advance Check ......
Erasing flash ...... done
Writing flash ...... 0x0008CC00 (9%)
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
A:\>afudos /iP5WD2P.rom
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
WARNING!! Do not turn off power during flash BIOS
Reading file ....... done
Reading flash ...... done
Advance Check ......
Erasing flash ...... done
Writing flash ...... done
Verifying flash .... done
Please restart your computer
A:\>
4-4
Chapter 4: BIOS setup
4.1.3 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS file when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS file using the motherboard
support CD or the floppy disk that contains the updated BIOS file.
•
•
Prepare the motherboard support CD or the floppy disk containing
the updated motherboard BIOS before using this utility.
Make sure that you rename the original or updated BIOS file in the
floppy disk to P5WD2P.ROM.
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1. Turn on the system.
2. Insert the floppy disk with the original or updated BIOS file to the
floppy disk drive.
3. The utility displays the following message and automatically checks
the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When found, the utility reads the BIOS file and starts flashing the
corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “P5WD2P.ROM”. Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4. Restart the system after the utility completes the updating process.
ASUS P5WD2 Premium
4-5
Recovering the BIOS from the support CD
To recover the BIOS from the support CD:
1. Remove any floppy disk from the floppy disk drive, then turn on the
system.
2. Insert the support CD to the optical drive.
3. The utility displays the following message and automatically checks
the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When no floppy disk is found, the utility automatically checks the
optical drive for the original or updated BIOS file. The utility then
updates the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file “P5WD2P.ROM”. Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4. Restart the system after the utility completes the updating process.
The recovered BIOS may not be the latest BIOS version for this
motherboard. Visit the ASUS website (www.asus.com) to download the
latest BIOS file.
4-6
Chapter 4: BIOS setup
4.1.4 ASUS EZ Flash utility
The ASUS EZ Flash feature allows you to update the BIOS without having to
go through the long process of booting from a floppy disk and using a
DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using EZ Flash:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS
file for the motherboard and rename the same to P5WD2P.ROM.
2. Save the BIOS file to a floppy disk, then restart the system.
3. Press <Alt> + <F2> during POST to display the following.
EZFlash starting BIOS update
Checking for floppy...
4. Insert the floppy disk that contains the BIOS file to the floppy disk
drive. When the correct BIOS file is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file “P5WD2P.rom”. Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
•
•
Do not shutdown or reset the system while updating the BIOS to
prevent system boot failure!
A “Floppy not found!” error message appears if there is no floppy
disk in the drive. A “P5WD2P.ROM not found!” error message
appears if the correct BIOS file is not found in the floppy disk. Make
sure that you rename the BIOS file to P5WD2P.ROM.
ASUS P5WD2 Premium
4-7
4.1.5 ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update
the motherboard BIOS in Windows® environment. The ASUS Update utility
allows you to:
• Save the current BIOS file
• Download the latest BIOS file from the Internet
• Update the BIOS from an updated BIOS file
• Update the BIOS directly from the Internet, and
• View the BIOS version information.
This utility is available in the support CD that comes with the motherboard
package.
ASUS Update requires an Internet connection either through a network
or an Internet Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
1. Place the support CD in the optical drive. The Drivers menu appears.
2. Click the Utilities tab, then click ASUS Update. See page 5-3 for
the Utilities screen menu.
3. The ASUS Update utility is copied to your system.
Quit all Windows® applications before you update the BIOS using this
utility.
4-8
Chapter 4: BIOS setup
Updating the BIOS through the Internet
To update the BIOS through the Internet:
1. Launch the ASUS Update utility from the Windows® desktop by clicking
Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
2. Select Update BIOS from
the Internet option from the
drop-down menu, then click
Next.
3. Select the ASUS FTP site
nearest you to avoid network
traffic, or click Auto Select.
Click Next.
ASUS P5WD2 Premium
4-9
4. From the FTP site, select the
BIOS version that you wish to
download. Click Next.
5. Follow the screen instructions to
complete the update process.
The ASUS Update utility is
capable of updating itself
through the Internet. Always
update the utility to avail all
its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
1. Launch the ASUS Update utility from the Windows® desktop by
clicking Start > Programs > ASUS > ASUSUpdate >
ASUSUpdate. The ASUS Update main window appears.
2. Select Update BIOS from a
file option from the drop-down
menu, then click Next.
3. Locate the BIOS file from the
Open window, then click Save.
4. Follow the screen instructions to
complete the update process.
4-10
Chapter 4: BIOS setup
4.2 BIOS setup program
This motherboard supports a programmable firmware chip that you can
update using the provided utility described in section “4.1 Managing and
updating your BIOS.”
Use the BIOS Setup program when you are installing a motherboard,
reconfiguring your system, or prompted to “Run Setup”. This section
explains how to configure your system using this utility.
Even if you are not prompted to use the Setup program, you can change
the configuration of your computer in the future. For example, you can
enable the security password feature or change the power management
settings. This requires you to reconfigure your system using the BIOS
Setup program so that the computer can recognize these changes and
record them in the CMOS RAM of the firmware hub.
The firmware hub on the motherboard stores the Setup utility. When you
start up the computer, the system provides you with the opportunity to
run this program. Press <Del> during the Power-On-Self-Test (POST) to
enter the Setup utility; otherwise, POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing
<Ctrl+Alt+Delete>, or by pressing the reset button on the system chassis.
You can also restart by turning the system off and then back on. Do this
last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being
a menu-driven program, it lets you scroll through the various sub-menus
and make your selections from the available options using the navigation
keys.
•
The default BIOS settings for this motherboard apply for most
conditions to ensure optimum performance. If the system becomes
unstable after changing any BIOS settings, load the default settings
to ensure system compatibility and stability. Select the Load
Default Settings item under the Exit Menu. See section “4.7 Exit
Menu.”
•
•
The BIOS setup screens shown in this section are for reference
purposes only, and may not exactly match what you see on your
screen.
Visit the ASUS website (www.asus.com) to download the latest BIOS
file for this motherboard.
ASUS P5WD2 Premium
4-11
4.2.1 BIOS menu screen
Menu items
Menu bar
Configuration fields
General help
Use [ENTER], [TAB],
or [SHIFT-TAB] to
select a field.
System Time
System Date
Legacy Diskette A
Language
[11:51:19]
[Sat 03/26/2005]
[1.44M, 3.5 in]
[English]
Use [+] or [-] to
configure system.
Primary IDE Master
Primary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
IDE Configuration
[ST320413A]
[ASUS CD-S520/A]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
System Information
Sub-menu items
Navigation keys
4.2.2 Menu bar
The menu bar on top of the screen has the following main items:
Main
For changing the basic system configuration
Advanced For changing the advanced system settings
Power
For changing the advanced power management (APM)
configuration
Boot
Exit
For changing the system boot configuration
For selecting the exit options and loading default
settings
To select an item on the menu bar, press the right or left arrow key on the
keyboard until the desired item is highlighted.
4.2.3 Navigation keys
At the bottom right corner of a menu screen are the navigation keys for
that particular menu. Use the navigation keys to select items in the menu
and change the settings.
Some of the navigation keys differ from one screen to another.
4-12
Chapter 4: BIOS setup
4.2.4 Menu items
The highlighted item on the menu bar
displays the specific items for that
menu. For example, selecting Main
shows the Main menu items.
Use [ENTER],
[TAB], or
[SHIFT-TAB] to
select a field.
System Time
System Date
Legacy Diskette A [1.44M, 3.5 in]
Language [English]
[11:51:19]
[Sat 03/26/2005]
Primary IDE Master [ST320413A]
Primary IDE Slave [ASUS CD-S520/A]
Third IDE Master [Not Detected]
Use [+] or [-]
to configure
Third IDE Slave
[Not Detected]
Fourth IDE Master [Not Detected]
Fourth IDE Slave [Not Detected]
IDE Configuration
System Information
The other items (Advanced, Power,
Boot, and Exit) on the menu bar have
their respective menu items.
Main menu items
4.2.5 Sub-menu items
A solid triangle before each item on any menu screen means that the iteam
has a sub-menu. To display the sub-menu, select the item and press
<Enter>.
4.2.6 Configuration fields
These fields show the values for the menu items. If an item is user-
configurable, you can change the value of the field opposite the item. You
cannot select an item that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when
selected. To change the value of a field, select it then press <Enter> to
display a list of options. Refer to “4.2.7 Pop-up window.”
4.2.7 Pop-up window
Select a menu item then press <Enter> to display a pop-up window with
the configuration options for that item.
4.2.8 Scroll bar
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
A scroll bar appears on the right side
may cause system to malfunction.
Configure DRAM Timing by SPD
Memory Acceleration Mode
DRAM Idle Timer
[Enabled]
[Auto]
[Auto]
of a menu screen when there are items
that do not fit on the screen. Press the
Up/Down arrow keys or <Page Up> /
<Page Down> keys to display the other
items on the screen.
DRAm Refresh Rate
Graphic Adapter Priority
Graphics Aperture Size
Spread Spectrum
[ 64 MB]
[Enabled]
Select Screen
Select Item
Change Option
ICH Delayed Transaction
MPS Revision
[Enabled]
[1.4]
+-
F1
General Help
F10 Save and Exit
ESC Exit
Pop-up window
4.2.9 General help
Scroll bar
At the top right corner of the menu
screen is a brief description of the
selected item.
ASUS P5WD2 Premium
4-13
4.3 Main menu
When you enter the BIOS Setup program, the Main menu screen appears,
giving you an overview of the basic system information.
Refer to section “4.2.1 BIOS menu screen” for information on the menu
screen items and how to navigate through them.
Use [ENTER], [TAB],
or [SHIFT-TAB] to
select a field.
System Time
System Date
Legacy Diskette A
Language
[11:51:19]
[Sat 03/26/2005]
[1.44M, 3.5 in]
[English]
Use [+] or [-] to
configure system.
Primary IDE Master
Primary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
IDE Configuration
[ST320413A]
[ASUS CD-S520/A]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
System Information
4.3.1 System Time [xx:xx:xxxx]
Allows you to set the system time.
4.3.2 System Date [Day xx/xx/xxxx]
Allows you to set the system date.
4.3.3 Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
[2.88M, 3.5 in.]
4.3.4 Language [English]
Allows you to choose the BIOS language version from the options.
Configuration options: [English] [Français] [Deutsch] [Japanese]
[Chinese (GB)] [Chinese BIG5]
4-14
Chapter 4: BIOS setup
4.3.5 Primary, Third, and Fourth IDE Master/Slave
The BIOS automatically detects the connected IDE devices. There is a
separate sub-menu for each IDE device. Select a device item, then press
<Enter> to display the IDE device information.
Primary IDE Master
Device
Vendor
Size
: Hard Disk
: ST320413A
: 20.0GB
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
: Supported
: 16 Sectors
: Supported
: MultiWord DMA-2
: Ultra DMA-5
SMART Monitoring: Supported
Type
LBA/Large Mode
[Auto]
[Auto]
Block(Multi-sector Transfer) [Auto]
PIO Mode
DMA Mode
[Auto]
[Auto]
SMART Monitoring
32Bit Data Transfer
[Auto]
[Disabled]
The BIOS automatically detects the values opposite the dimmed items
(Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra
DMA, and SMART monitoring). These values are not user-configurable.
These items show N/A if no IDE device is installed in the system.
Type [Auto]
Selects the type of IDE drive. Setting to [Auto] allows automatic selection
of the appropriate IDE device type. Select [CDROM] if you are specifically
configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media
Device) if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled]
[Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the
data transfer from and to the device occurs multiple sectors at a time if
the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
ASUS P5WD2 Premium
4-15
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.6 IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you want to configure the item.
IDE Configuration
When in AHCI/RAID
mode SATA
Configure SATA As
Onboard IDE Operate Mode
[Standard IDE]
[Enhanced Mode]
controller is
forced to Native
mode.
Enhanced Mode Support On [S-ATA]
IDE Detect Time Out (Sec) [35]
Configure SATA As [Standard IDE]
Sets the configuration for the Serial ATA connectors supported by the
Southbridge chip.
The AHCI allows the onboard storage driver to enable advanced Serial ATA
features that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.
If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel®
Matrix Storage Technology configuration from the Serial ATA hard disk
drives, set this item to [RAID].
4-16
Chapter 4: BIOS setup
If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, keep the defaul setting [Standard IDE].
If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. For details on AHCI, go to:
www.intel.com/support/chipsets/imst/sb/CS-012304.htm
www.intel.com/support/chipsets/imst/sb/CS-012305.htm
The SATA controller is set to Native mode when this item is set to [RAID]
or [AHCI]
Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the installed
operating system (OS). Set to [Enhanced Mode] if you are using native OS
including Windows® 2000/XP. Configuration options: [Disabled]
[Compatible Mode] [Enhanced Mode]
If you are using a Serial ATA optical drive, set this item to [Compatible
Mode] before creating a boot disk using the support CD.
Enhanced Mode Support On [S-ATA]
Allows you to use native OS on Serial ATA and Parallel ATA ports. It is
recommend that you do not change the default setting for better OS
compatibility. In this setting, you may use legacy OS on the Parallel
ATA ports only if you do not install any Serial ATA device.
The P-ATA+S-ATA and P-ATA options are for advanced users only. If
you set to any of these options and encountered problems, revert to
the default setting S-ATA. Configuration options: [P-ATA+S-ATA]
[S-ATA] [P-ATA]
The Onboard IDE Operate Mode and its sub-menu items appear
only when the Configure SATA As item is set to [Standard IDE].
Onboard Serial-ATA BOOTROOM [Enabled]
Enables or disables the onboard Serial ATA boot ROM.
Configuration options: [Disabled] [Enabled]
The Onboard Serial-ATA BOOTROM appears only when the
Configure SATA As item is set to [RAID].
ALPE and ASP [Disabled]
Allows you to enable or disable the Agressive Link Power Management
(ALPE) and Aggressive Slumber/Partial (ASP) management features.
Configuration options: [Disabled] [Enabled]
ASUS P5WD2 Premium
4-17
AHCI Port 3 Interlock Switch [Disabled]
Enables or disables the Advanced Host Controller Interface (AHCI) Port
3 interlock switch. Configuration options: [Disabled] [Enabled]
The ALPE and ASP and its sub-menu item appear only when the
Configure SATA As item is set to [AHCI].
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
4.3.7 System Information
This menu gives you an overview of the general system specifications. The
BIOS automatically detects the items in this menu.
AMIBIOS
Version
: 0111
Build Date : 03/22/05
Processor
Type
Speed
Count
: Genuine Intel(R) CPU 3.20GHz
: 3200 MHz
: 1
System Memory
Size
: 1024MB
AMI BIOS
Displays the auto-detected BIOS information.
Processor
Displays the auto-detected CPU specification.
System Memory
Displays the auto-detected system memory.
4-18
Chapter 4: BIOS setup
4.4 Advanced menu
The Advanced menu items allow you to change the settings for the CPU
and other system devices.
Take caution when changing the settings of the Advanced menu items.
Incorrect field values can cause the system to malfunction.
Adjust system
frequency/voltage.
JumperFree Configuration
LAN Cable Status
USB Configuration
CPU Configuration
Chipset
Onboard Devices Configuration
PCIPnP
4.4.1 JumperFree Configuration
Configure System Frequency/Voltage
Select the targe CPU
frequency, and the
relevant parameters
will be auto-adjusted.
Frequencies higher
than CPU manufacturer
recommends are not
guaranteed to be
AI Overclocking
[Auto]
stable. If the system
becomes unstable,
return to the default.
AI Overclocking [Auto]
Allows you to select the overclocking options to achieve the desired CPU
internal frequency. Select either one of the preset overclocking
configiuration options.
Manual - allows you to individually set overclocking parameters.
Auto - loads the optimal settings for the system.
AI NOS - the ASUS AI Non-delay Overclocking System feature
intelligently determines the system load and automatically boost
the performance for the most demanding tasks.
Standard - loads the standard settings for the system.
Overclock Profile - loads overclocking profiles with optimal
parameters for stability when overclocking.
ASUS P5WD2 Premium
4-19
The following item appears only when you install a CPU that supports the
lock free feature. Only some latest CPUs support this feature
CPU Lock Free [Auto]
This feature allows you to adjust the CPU multiplier to 14x. Setting this
item to [Auto] allows the motherboard to automatically reduce the CPU
multiplier value for more flexibility when increasing external FSB.
Configuration options: [Auto] [Disabled] [Enabled]
The following item appears only when you set the AI Overclocking
item to [Manual].
CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and
PCI bus. The value of this item is auto-detected by the BIOS. Use the <+>
and <-> keys to adjust the CPU frequency. You can also type the desired
CPU frequency using the numeric keypad. The values range from 100 to
400. Refer to the table below for the correct Front Side Bus and CPU
External Frequency settings.
FSB/CPU External Frequency Synchronization
Front Side Bus
CPU External Frequency
FSB 1066
FSB 800
FSB 533
266 MHz
200 MHz
133 MHz
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Configuration options: [Auto] [DDR2-400MHz] [DDR2-533MHz]
[DDR2-667MHz] [DDR2-800MHz]
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
PCI Express Frequency [Auto]
Allows you to set the PCI Express frequency. This item is set to [Auto] by
default. Configuration options: [Auto] [90] ~ [150]
PCI Clock Synchronization Mode [Auto]
Allows you to synchronize the PCI frequency with the PCI Express or CPU
frequency. Configuration options: [To CPU] [33.33MHz] [Auto]
CPU Clock Spread Spectrum [Enabled]
Allows you to enable or disable the clock generator spread spectrum.
Configuration options: [Disabled] [Enabled]
4-20
Chapter 4: BIOS setup
PCIE Clock Spread Spectrum [Enabled]
Allows you to enable or disable the PCI Express clock spread spectrum.
Configuration options: [Disabled] [Enabled]
The following items also appear when the AI Overclocking item is set
to [AI NOS].
Memory Voltage [Auto]
Allows you to select the DDR2 reference voltage.
Configuration options: [Auto] [1.80V] [1.90V] [1.95V] [2.0V] [2.10V]
[2.15V] [2.20V] [2.30V]
Refer to the DDR2 documentation before adjusting the memory voltage.
Setting a very high memory voltage may damage the memory module(s)!
CPU VCore Voltage [Auto]
Allows you to select the CPU VCore voltage. Configuration options: [Auto]
[1.7000V] [1.6875V] [1.6750V] [1.6625V] [1.6500V] [1.6375V]
[1.6250V] [1.6125V] [1.6000V] [1.5875V] [1.5750V] [1.5625V]
[1.5500V] [1.5375V] [1.5250V] [1.5125V] [1.5000V] [1.4875V]
[1.4750V] [1.4625V] [1.4500V] [1.4375V] [1.4250V] [1.4125V]
[1.4000V] [1.3875V] [1.3750V] [1.3625V] [1.3500V] [1.3375V]
[1.3250V] [1.3125V] [1.3000V] [1.2875V] [1.2750V] [1.2625V]
[1.2500V] [1.2375V] [1.2250V] [1.2125V] [1.2000V] [1.1875V]
Refer to the CPU documentation before setting the CPU Vcore voltage.
Setting a high Vcore voltage may damage the CPU!
FSB Termination Voltage [Auto]
Allows you to select the front side bus termination voltage.
Configuration options: [Auto] [1.200V] [1.300V] [1.400V] [1.500V]
MCH Chipset Voltage [Auto]
Allows you to select the chipset voltage of the memory controller hub
(MCH). Configuration options: [Auto] [1.500V] [1.550V] [1.600V]
[1.650V]
Setting a high MCH chipset voltage may damage the chipset!
ASUS P5WD2 Premium
4-21
ICH Chipset Voltage [Auto]
Allows you to select the chipset voltage of the I/O controller hub (ICH).
Configuration options: [Auto] [1.057V] [1.215V]
Setting a high ICH chipset voltage may damage the chipset!
The following item appears only when the AI Overclocking item is set
to [Overclock Profile].
Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset values.
Configuration options:
[Overclock 5%] [FSB888/DDR2-667]
[Overclock 10%] [FSB960/DDR2-800]
[Overclock 15%] [FSB1200/DDR2-800]
[Overclock 20%] [FSB1280/DDR2-800]
[Overclock 30%] [FSB1333/DDR2-667]
[FSB1333/DDR2-834]
The following item appears only when the AI Overclocking item is set
to [AI NOS].
NOS Mode [Auto]
Sets the Non-Delay Overclocking System mode. Select either of the
following configuration options:
Auto - loads the optimum sensitivity and overclocking percentage
setting.
Manual - allows you to manually set overclocking configurations.
The following items appear if the NOS Mode item is set to [Manual]
Sensitivity [Sensitive]
Allows you to choose the sensitivity of the AI NOS sensor. Setting this item
to [Sensitive] will trigger AI NOS with less CPU loading. Configuration
options: [Normal] [Sensitive] [Less-Sensitive]
4-22
Chapter 4: BIOS setup
Target Frequency [Overclock XX%]
Allows you to set the maximum overclock percentage for the selected NOS
Mode. Configuration options: [Overclock 3%] [Overclock 5%] [Overclock
7%] [Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
Selecting a very high frequency may cause the system to become
unstable. If this happens, revert to the default setting.
4.4.2 LAN Cable Status
This menu displays the status of the Local Area Network (LAN) cable
connected to the LAN (RJ-45) port.
POST Check LAN Cable
LAN Cable Status
[Disabled]
Check LAN cable
during POST.
Pair
Status
Length
1-2
3-6
4-5
7-8
Normal
Normal
Normal
Normal
N/A
N/A
N/A
N/A
1-2
3-6
4-5
7-8
Normal
Normal
Normal
Normal
N/A
N/A
N/A
N/A
POST Check LAN Cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When
enabled, the menu reports the cable faults or shorts, and displays the point
(length) where the fault or short is detected.
Configuration options: [Disabled] [Enabled]
ASUS P5WD2 Premium
4-23
4.4.3 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
USB Configuration
Enables USB host
controllers.
Module Version - 2.24.0-F.4
USB Devices Enabled: None
USB Function
[Enabled]
[Auto]
[Disabled]
[HiSpeed]
[Disabled]
Legacy USB Support
USB 2.0 Controller
USB 2.0 Controller Mode
BIOS EHCI Hand-off
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
USB Function [Enabled]
Enables or disables the USB host controllers.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller [Disabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
The following items appear only when the USB 2.0 Controller is set
to [Enabled].
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]
BIOS EHCI Hand-off [Disabled]
Allows you to enable support for operating systems without an EHCI
hand-off feature. Configuration options: [Enabled] [Disabled]
4-24
Chapter 4: BIOS setup
4.4.4 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure Advanced CPU settings
Sets the ratio
between CPU Core
Clock and the FSB
Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
Manufacturer: Intel
Brand String: Genuine Intel(R) CPU 3.20GHz
Frequency
FSB Speed
: 3200 MHz
: 800 MHz
Cache L1
Cache L2
Cache L3
: 16 KB
: 1024 KB
: 0 KB
Ratio Status: Unlocked (Max:14, Min:14)
Ratio Actual Value : 16
Ratio CMOS Setting:
VID CMOS Setting:
[ 8]
[ 62]
Microcode Updation
[Enabled]
[Disabled]
[Disabled]
[Auto]
Max CPUID Value Limit:
Execute Disable Function
Enhanced C1 Control
CPU Internal Thermal Control [Auto]
Ratio CMOS Setting [ 8]
Sets the ratio between the CPU core clock and the Front Side Bus
frequency. The BIOS auto-detects the default value of this item. Use the
<+> or <-> keys to adjust the values. Configuration options:
You can only adjust the Ratio CMOS if you installed an unlocked CPU.
Refer to the CPU documentation for details.
VID CMOS Setting [ 62]
Allows you to set the VID CMOS setting at which the processor is to run.
The BIOS auto-detects the default value of this item. Use the <+> or <->
keys to adjust the values.
The following item appears only when you install a CPU that supports the
lock free feature. Only some latest CPUs support this feature.
Microcode Updation [Enabled]
Allows you to enable or disable the microcode updation.
Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Setting this item to [Enabled] allows legacy operating systems to boot
even without support for CPUs with extended CPUID functions.
Configuration options: [Disabled] [Enabled]
ASUS P5WD2 Premium
4-25
Execute Disable Function [Disabled]
Allows you to enable or disable the No-Execution Page Protection
Technology. Setting this item to [Enabled] forces the XD feature flag to
always return to zero (0). Configuration options: [Disabled] [Enabled]
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS automatically checks the CPU’s capability to
enable the C1E support. In C1E mode, the CPU power consumption is lower
when idle. Configuration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Allows you to disable or set to auto the CPU Internal Thermal Control
function. When set to [Auto], the BIOS automatically checks the CPU’s
capability to enable TM or TM2 support. In TM mode, the CPU power
consumption is reduced. In TM2 mode, the CPU core and VID are reduced.
Configuration options: [Auto] [Disabled]
Scroll down the screen to display the following items.
Hyper-Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Refer to the Appendix for more information on the Hyper-Threading
Technology. Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel® Pentium® 4
CPU that supports the Enhanced Intel SpeedStep® Technology (EIST).
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel SpeedStep® Technology. When set to
[Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum].
Configuration options: [Maximum] [Minimum] [Automatic] [Disabled]
•
•
Refer to the Appendix for details on how to use the EIST feature.
The motherboard comes with a BIOS file that supports EIST.
4-26
Chapter 4: BIOS setup
4.4.5 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
Configure DRAM Timing by SPD
[Enabled]
DRAM ECC Mode
Hyper Path 3
Booting Graphic Adapter Priori
[Auto]
[Auto]
[PCI Express/PCI]
PEG Buffer Length
Link Latency
PEG Root Control
PEG Link Mode
Slot Power
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Auto]
High Priority Port Select
Second PCI-E slot mode
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can
manually set the DRAM timing parameters through the DRAM sub-items.
The following sub-items appear when this item is Disabled.
Configuration options: [Disabled] [Enabled]
DRAM CAS# Latency [5 Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available. Configuration options: [6 Clocks]
[5 Clocks] [4 Clocks] [3 Clocks]
DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [2 Clocks] ~ [6 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and the
read/write command. Configuration options: [2 Clocks] ~ [6 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]
Configuration options: [1 Clock] ~ [15 Clocks]
DRAM Write Recovery Time [4 Clocks]
Configuration options: [2 Clocks] ~ [5 Clocks]
DRAM ECC Mode [Auto]
Allows you to disable or set to [Auto] the DRAM ECC mode.
Configuration options: [Disabled] [Auto]
ASUS P5WD2 Premium
4-27
Hyper Path 3 [Auto]
Allows you to enable or disable the ASUS Hyper Path 3 feature.
Configuration options: [Disabled] [Enabled] [Auto]
Booting Graphic Adapter Priority [PCI Express/PCI]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI Express/PCI] [PCI/PCI Express]
PEG Buffer Length [Auto]
Sets the length of the PCI Express graphics card buffer.
Configuration options: [Auto] [Long] [Short]
Link Latency [Auto]
Sets the PCI Express graphics card link latency.
Configuration options: [Auto] [Slow] [Normal]
PEG Root Control [Auto]
Allows you to enable, disable, or set to automatic the PCI Express graphics
card root control. Configuration options: [Auto] [Disabled] [Enabled]
PEG Link Mode [Auto]
Sets the PCI Express graphics link mode. Setting this item to [Auto] allows
the motherboard to automatically adjust the PCI Express graphics link mode
to the correct frequency based on the system configuration. Four
additional settings are available for overclocking the PEG Link Mode.
Configuration options: [Auto] [Slow] [Normal] [Fast] [Faster]
Slot Power [Auto]
Sets the PCI Express graphics card slot power.
Configuration options: [Auto] [Light] [Normal] [Heavy] [Heavier]
High Priority Port Select [Disabled]
Allows you to disable or select the high priority port. The specified high
priority port will be given arbitration above VC0 but below VC1.
Configuration options: [Disabled] [PCI Express Port 5] [PCI Express Port 6]
Second PCI-E Slot Mode [Auto]
Allows you to select the mode at which the universal PCI Express slot is to
operate. Selecting auto allows the BIOS to automatically optimize the slot
performance and functionality according to the devices installed.
Configuration options: [Auto] [x2 Mode (Fast)] [x4 Mode (Faster)]
4-28
Chapter 4: BIOS setup
4.4.6 Onboard Devices Configuration
Enable or disable
High Definition Audio
Controller.
Configure Win627EHF Super IO Chipset
HD Audio Controller
Front Panel Support Type
Onboard 1394 Controller
Onboard PCIEX GbE LAN
LAN Option ROM
Onboard PCI LAN
LAN Option ROM
Silicon 3132 Controller
ITE8211F Controller
Detecting Device Time
[Enabled]
[HD Audio]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[SATA2]
[Enabled]
[Quick Mode]
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
[3F8/IRQ4]
[378]
[ECP]
[DMA3]
[IRQ7]
[Disabled]
Onboard Game/MIDI Port
HD Audio Controller [Enabled]
Allows you to enable or disable the high-definition audio CODEC.
Configuration options: [Enabled] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAAF) mode to legacy
AC‘97 or high–definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
OnBoard 1394 Controller [Enabled]
Allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Disabled] [Enabled]
OnBoard PCIEX GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN
controller. Configuration options: [Disabled] [Enabled]
The Gigabit LAN controller does not support S5 Wake-On-LAN function
under DOS mode or Windows® Me.
LAN Option ROM [Disabled]
This item allows you to enable or disable the option ROM in the
onboard LAN controller. This item appears only when the Onboard
PCIEX Gbe LAN item is set to Enabled. Configuration options:
[Disabled] [Enabled]
Onboard PCI LAN [Enabled]
Allows you to enable or disable the onboard PCI LAN controller.
Configuration options: [Disabled] [Enabled]
ASUS P5WD2 Premium
4-29
LAN Option ROM [Disabled]
This item allows you to enable or disable the option ROM in the
onboard LAN controller. This item appears only when the Onboard
PCI LAN item is set to Enabled. Configuration options: [Disabled]
[Enabled]
Silicon 3132 Controller [SATA2 Mode]
Allows you to set the mode at which the onboard Silicon Image 3132 Serial
ATA controller will operate. Set this item to [SATA2 Mode] to enable
hot-plug function for the external device. Configuration options: [Disabled]
[SATA2 Mode] [RAID Mode]
ITE8211F Controller [Enabled]
Allows you to enable or disable the the onboard ITE® 8211F IDE controller.
Configuration options: [Disabled] [Enabled]
Detecting Device Time [Quick Mode]
Sets the time the ITE8211F IDE controller detects devices connected
to the IDE connectors. This item appears only when the ITE8211F
Controller is set to [Enabled]. Configuration options: [Standard
Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]
4-30
Chapter 4: BIOS setup
Onboard Game/MIDI Port [Disabled]
Allows you to select the Game Port address or to disable the port.
Configuration options: [Disabled] [200/300] [200/330] [208/300]
[208/330]
4.4.7 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
Advanced PCI/PnP Settings
NO: Lets the BIOS
configue all the
devices in the system.
YES: Lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
[No]
[64]
[Yes]
[Disabled]
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device
latency timer register. Configuration options: [32] [64] [96] [128] [160]
[192] [224] [248]
ASUS P5WD2 Premium
4-31
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card
requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the
PCI VGA card even if requested. Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
4.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.
Suspend Mode
[S1 (POS) only]
[No]
[No]
Select the ACPI state
used for System
Suspend.
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
[Enabled]
APM Configuration
Hardware Monitor
4.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI)
state to be used for system suspend. Setting this item to [Auto] allows the
OS to select the ACPI state. Configuration options: [S1 (POS) Only]
[S3 Only] [Auto]
4-32
Chapter 4: BIOS setup
4.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
4.5.3 ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
4.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
4.5.5 APM Configuration
APM Configuration
Power Button Mode
Go into On/Off or
Suspend when Power
button is pressed.
[On/Off]
Restore on AC Power Loss
Power On By RTC Alarm
[Power Off]
[Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices
Power On By PCIE Devices
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
ASUS P5WD2 Premium
4-33
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event.
Configuration options: [Disabled] [Enabled]
The succeeding items appear when the Power On By RTC Alarm
item is set to Enabled.
RTC Alarm Date
To set the alarm date, highlight this item and press the <+> or <->
key to make the selection. Configuration options: [Everyday] [1] [2]
[3]... ~ [31]
RTC Alarm Hour
To set the alarm hour, highlight this item and press the <+> or <->
key to make the selection. Configuration options: [00] [1]... ~ [23]
RTC Alarm Minute
To set the alarm minute, highlight this item and press the <+> or <->
key to make the selection. Configuration options: [00] [1]... ~ [59]
RTC Alarm Second
To set the alarm second, highlight this item and press the <+> or <->
key to make the selection. Configuration options: [00] [1]... ~ [59]
Power On By External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI Express device. Configuration options: [Disabled] [Enabled]
4-34
Chapter 4: BIOS setup
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc]
[Power Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
ASUS P5WD2 Premium
4-35
4.5.5 Hardware Monitor
Hardware Monitor
CPU Temperature
CPU Temperature
MB Temperature
[32.5ºC/90.5ºF]
[36.0ºC/96.5ºF]
CPU Fan Speed (RPM)
ASUS Q-Fan Control
Chassis Fan1 Speed (RPM)
Chassis Fan2 Speed (RPM)
Chassis Q-Fan Control
Power Fan Speed (RPM)
[3813 RPM]
[Disabled]
[N/A]
[N/A]
[Disabled]
[N/A]
VCORE Voltage
3.3V Voltage
5V Voltage
[ 1.320V]
[ 3.345V]
[ 5.094V]
[11.880V]
12V Voltage
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Disabled] if you do not wish to
display the detected temperatures.
CPU Fan Speed (RPM) [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select [Ignore] from the item options to
disable CPU fan speed monitoring.
ASUS Q-FAN Control [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation. Configuration
options: [Disabled] [Enabled]
The CPU Q-Fan Mode and CPU Fan Profile Mode items appear
when you enable the ASUS Q-FAN Control feature.
CPU Q-Fan Mode [PWM]
Allows you to select the type of CPU fan cable connected to the CPU fan
connector. Set to [PWM] when using a 4-pin CPU fan cable. Set to [DC]
when using a 3-pin CPU fan cable. Configuration options: [PWM] [DC]
Some CPU fans with a 4-pin cable do not comply with Intel®’s PWM fan
specification. When using this type of CPU fan, you can not reduce the
CPU fan speed even if you set the CPU Q-Fan Mode to [PWM].
4-36
Chapter 4: BIOS setup
CPU Fan Profile Mode [Optimal]
Allows you to set the appropriate performance level of the CPU Q-Fan. Set
to [Optimal Mode] for optimal settings to enable quiet operation.
[Performance Mode] allows balanced speed to allow quiet operation under
heavy system loading. [Silent Mode] maximizes the fan speed to provide
the quietest operation. Configuration options: [Optimal] [Performance
Mode] [Silent]
Chassis Fan1/2 Speed [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the
chassis fan speed in rotations per minute (RPM). If the fan is not connected
to the chassis, the specific field shows N/A. Select [Ignore] from the item
options to disable chassis fan speed monitoring.
Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the chassis fan speeds for more efficient system operation. When
enabled, the chassis fan ratio is the same with the selected CPU fan ratio.
Configuration options: [Disabled] [Enabled]
The Chassis Fan Profile Mode item appears when you enable the
Chassis Q-Fan Control feature.
Chassis Fan Profile Mode [Optimal]
Allows you to set the appropriate performance level of the chassis Q-Fan.
Configuration options: [Optimal] [Performance Mode] [Silent]
ASUS P5WD2 Premium
4-37
Power Fan Speed (RPM) [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
power fan speed in rotations per minute (RPM). If the fan is not connected
to the power fan connector, the specific field shows N/A.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
4-38
Chapter 4: BIOS setup
4.6 Boot menu
The Boot menu items allow you to change the system boot options. Select
an item then press <Enter> to display the sub-menu.
Specifies the Boot
Device Priority
sequence.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
A virtual floppy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the first
boot device.
4.6.1 Boot Device Priority
Specifies the boot
sequence from the
available devices.
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
[1st FLOPPY DRIVE]
[PM-ST330620A]
[ATAPI CD-ROM]
A device enclosed in
parenthesis has been
disable din the
corresponding type
menu.
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
ASUS P5WD2 Premium
4-39
4.6.2 Boot Settings Configuration
Boot Settings Configuration
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For ‘F1’ If Error
Hit ‘DEL’ Message Display
Interrupt 19 Capture
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run
Setup” during POST. Configuration options: [Disabled] [Enabled]
4-40
Chapter 4: BIOS setup
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
4.6.3 Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Security Settings
<Enter> to change
password.
<Enter> again to
disabled password.
Supervisor Password
User Password
: Not Installed
: Not Installed
Change Supervisor Password
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed.
After you set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item, then press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor
Password then press <Enter>. The message “Password Uninstalled” appears.
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for information
on how to erase the RTC RAM.
ASUS P5WD2 Premium
4-41
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Security Settings
Supervisor Password
User Password
: Not Installed
: Not Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
[Full Access]
[Setup]
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
Limited allows changes only to selected fields, such as Date and
Time.
Full Access allows viewing and changing all the fields in the Setup
utility.
Change User Password
Select this item to set or change the user password. The User Password
item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
4-42
Chapter 4: BIOS setup
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]
ASUS P5WD2 Premium
4-43
4.7 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the
Exit menu to ensure the values you selected are saved to the CMOS RAM.
An onboard backup battery sustains the CMOS RAM so it stays on even
when the computer is turned off. When you select this option, a
confirmation window appears. Select Yes to save the changes and exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press <Enter> to save the changes while
exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you
made to the Setup program. If you made changes to fields other than
System Date, System Time, and Password, the BIOS asks for a confirmation
before exiting.
Discard Changes
Allows you to discard the selections you made and restore the previously
saved values. After selecting this option, a confirmation appears. Select
Yes to discard any changes and load the previously saved values.
4-44
Chapter 4: BIOS setup
Load Setup Defaults
Allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F5>, a
confirmation window appears. Select Yes to load default values. Select
Exit & Save Changes or make other changes before saving the values
to the non-volatile RAM.
ASUS P5WD2 Premium
4-45
4-46
Chapter 4: BIOS setup
This chapter describes the contents
of the support CD that comes with
the motherboard package.
Software
5
support
Chapter summary
5
5.1
5.2
5.3
5.4
5.5
Installing an operating system ............................................. 5-1
Support CD information........................................................ 5-1
Software information .........................................................5-10
RAID configurations ............................................................5-18
Creating a RAID driver disk .................................................5-36
ASUS P5WD2 Premium
5.1 Installing an operating system
This motherboard supports Windows® 2000/2003 Server/XP operating
systems (OS). Always install the latest OS version and corresponding
updates to maximize the features of your hardware.
•
Motherboard settings and hardware options vary. Use the setup
procedures presented in this chapter for reference only. Refer to
your OS documentation for detailed information.
•
Make sure that you install Windows® 2000 Service Pack 4 or the
Windows® XP Service Pack1 or later versions before installing the
drivers for better compatibility and system stability.
5.2 Support CD information
The support CD that came with the motherboard package contains the
drivers, software applications, and utilities that you can install to avail all
motherboard features.
The contents of the support CD are subject to change at any time
without notice. Visit the ASUS website (www.asus.com) for updates.
5.2.1 Running the support CD
Place the support CD to the optical drive. The CD automatically displays the
Drivers menu if Autorun is enabled in your computer.
Click an icon to
display support
CD/motherboard
information
Click to display
more items
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of
the support CD to locate the file ASSETUP.EXE from the BIN folder.
Double-click the ASSETUP.EXE to run the CD.
ASUS P5WD2 Premium
5-1
5.2.2 Drivers menu
The drivers menu shows the available device drivers if the system detects
installed devices. Install the necessary drivers to activate the devices.
The screen display and driver options vary under different operating
system versions.
QFE Update
Installs the Quick Fix Engineering (QFE) driver updates.
Intel Chipset Inf Update Program
Installs the Intel® Chipset INF Update Program. This driver enables
Plug-n-Play INF support for the Intel® chipset components on the
motherboard. When installed to the target system, this driver provides the
method for configuring the chipset components.
You can install this utility using three different modes: interactive, silent or
unattended preload. Installing the driver in interactive mode requires user
input during installation. User input is not required when installing the driver
in silent or unattended preload modes. Refer to the online help or readme
file that came with the utility for details.
Make ICH7 32 bit RAID Driver Disk
Make ICH7 64 bit RAID Driver Disk
Allows you to create an ICH7 RAID driver disk for a 32/64-bit system.
5-2
Chapter 5: Software support
Realtek Audio Driver
Installs the Realtek® ALC882 audio driver and application. See page 5-11
for details.
Intel(R) Tekoa Ethernet Driver
Installs the driver for the Intel® Tekoa PCI Express Gigabit LAN driver.
Marvell 88E8001 Gigabit Ethernet Driver
Installs the Marvell 88E8001 Gigabit Ethernet driver.
Make ITE8211 IDE Driver Disk
Allows you to create an ITE8211 IDE driver disk.
Make Silicon Image 32bit RAID Driver Disk
Make Silicon Image 32bit SATA Driver Disk
Allows you to create a Silicon Image® RAID/Serial ATA driver disk for a
32-bit system.
Click
to display more items.
ASUS P5WD2 Premium
5-3
Make Silicon Image 64-bit RAID Driver Disk
Make Silicon Image 64-bit SATA Driver Disk
Allows you to create a Silicon Image® RAID/Serial ATA driver disk for a
64-bit system.
USB 2.0 Driver
Installs the USB 2.0 driver.
Click
to go back to the previous screen.
5-4
Chapter 5: Software support
5.2.3 Utilities menu
The Utilities menu displays the software applications and utilities that the
motherboard supports. Click on an item to install.
ASUS PC Probe II
This smart utility monitors the fan speed, CPU temperature, and system
voltages, and alerts you of any detected problems. This utility helps you
keep your computer in healthy operating condition.
ASUS Update
The ASUS Update utility that allows you to update the motherboard BIOS in
Windows® environment. This utility requires an Internet connection either
through a network or an Internet Service Provider (ISP). See page 4-8 for
details.
ASUS Screen Saver
Bring life to your idle screen by installing the ASUS screen saver.
ADOBE Acrobat Reader
The Adobe Acrobat® Reader V5.0 is for opening, viewing, and printing
documents in Portable Document Format (PDF).
Microsoft DirectX 9.0c
The Microsoft DirectX® 9.0c is a multimedia technology that enhances
computer graphics and sounds. DirectX® improves the multimedia features
of your computer so you can enjoy watching TV and movies, capturing
videos, or playing games in your computer.
ASUS P5WD2 Premium
5-5
AI Booster
The ASUS AI Booster application allows you to overclock the CPU speed in
Windows® environment.
Anti-virus Utility
The anti-virus utility scans, identifies, and removes computer viruses.
View the online help for detailed information.
5.2.4 Manuals menu
The Manuals menu contains the user manuals for third party components
and applications.
Most user manual files are in Portable Document Format (PDF). Install
the Adobe Acrobat Reader application from the Utilities tab before
opening a user manual file.
5-6
Chapter 5: Software support
5.2.5 Contact information
Click the Contact tab to display the ASUS contact information. You can
also find this information on the inside front cover of this user guide.
5.2.6 Other information
The icons on the top right corner of the screen provide additional
information on the motherboard and the contents of the support CD. Click
an icon to display the specified information.
Motherboard Info
Displays the general specifications of the motherboard.
ASUS P5WD2 Premium
5-7
Browse this CD
Displays the contents of the support CD in graphical format.
Technical Support Form
Displays the ASUS Technical Support Request Form that you have to fill out
when requesting technical support.
5-8
Chapter 5: Software support
Filelist
Displays the contents of the support CD in text format.
ASUS P5WD2 Premium
5-9
5.3 Software information
Most of the applications in the support CD have wizards that will
conveniently guide you through the installation. View the online help or
readme file that came with the software application for more information.
5.3.1 ASUS MyLogo2™
The ASUS MyLogo2™ utility lets you customize the boot logo. The boot
logo is the image that appears on screen during the Power-On-Self-Tests
(POST). The ASUS MyLogo2™ is automatically installed when you install the
ASUS Update utility from the support CD. See section “5.2.3 Utilities
menu” for details.
•
•
•
Before using the ASUS MyLogo2™, use the AFUDOS utility to make a
copy of your original BIOS file, or obtain the latest BIOS version from
the ASUS website. See section “4.1.2 AFUDOS utility.”
Make sure that the BIOS item Full Screen Logo is set to
[Enabled] if you wish to use ASUS MyLogo2. See section “4.6.2
Boot Settings Configuration.”
You can create your own boot logo image in GIF, JPG, or BMP file
formats.
To launch the ASUS MyLogo2™:
1. Launch the ASUS Update utility. Refer to section “4.1.5 ASUS Update
utility” for details.
2. Select Options from the drop down menu, then click Next.
3. Check the option Launch MyLogo to replace system boot
logo before flashing BIOS, then click Next.
4. Select Update BIOS from a file from the drop down menu, then
click Next.
5. When prompted, locate the new
BIOS file, then click Next. The
ASUS MyLogo2 window appears.
6. From the left window pane, select
the folder that contains the image
you intend to use as your boot
logo.
5-10
Chapter 5: Software support
7. When the logo images appear on
the right window pane, select an
image to enlarge by clicking on it.
8. Adjust the boot image to your
desired size by selecting a value
on the Ratio box.
9. When the screen returns to the ASUS Update utility, flash the original
BIOS to load the new boot logo.
10. After flashing the BIOS, restart the computer to display the new boot
logo during POST.
ASUS P5WD2 Premium
5-11
5.3.2 AI NET2
The AI NET2 features the Marvell® Virtual Cable Tester™ (VCT). VCT is a
cable diagnostic utility that reports LAN cable faults and shorts using the
Time Domain Reflectometry (TDR) technology. The VCT detects and
reports open and shorted cables, impedance mismatches, pair swaps, pair
polarity problems, and pair skew problems of up to 64 ns at one meter
accuracy.
The VCT feature reduces networking and support costs through a highly
manageable and controlled network system. This utility can be incorporated
in the network systems sofware for ideal field support as well as
development diagnostics.
Using the Virtual Cable Tester™
To use the the Marvell® Virtual Cable Tester™ utility:
1. Launch the VCT utility from the Windows® desktop by clicking
Start > All Programs > Marvell > Virtual Cable Tester.
2. Click Virtual Cable Tester from the menu to display the screen
below.
3. Click the Run button to perform a cable test.
•
•
•
The VCT only runs on systems with Windows® XP or Windows® 2000
operating systems.
The VCT utility only tests Ethernet cables connected to Gigabit LAN
port(s).
The Run button on the Virtual Cable Tester™ main window is
disabled if no problem is detected on the LAN cable(s) connected to
the LAN port(s).
•
If you want the system to check the status of the LAN cable before
entering the OS, enable the item Post Check LAN Cable in the
BIOS Setup.
5-12
Chapter 5: Software support
5.3.3 Audio configurations
The Realtek® ALC882D audio CODEC provides 8-channel audio capability to
deliver the ultimate audio experience on your PC. The software provides
Jack-Sensing function, S/PDIF Out support, and interrupt capability. The
ALC882D also includes the Realtek® proprietary UAJ® (Universal Audio
Jack) technology for all audio ports, eliminating cable connection errors and
giving users plug and play convenience.
Follow the installation wizard to install the Realtek® Audio Driver from
the support CD that came with the motherboard package.
If the Realtek audio software is correctly installed, you will find the Realtek
HD Audio Manager icon on the taskbar.
From the taskbar, double-click on the
SoundEffect icon to display the
Realtek HD Audio Manager.
Realtek HD Audio Manager
Realtek HD Audio Manager
Exit
Configuration
options
button
Minimize
button
Control
settings
window
Information
button
Tool button
Dolby® feature
launch buttons
ASUS P5WD2 Premium
5-13
Information
Click the information button
(
) to display information
about the audio driver version,
DirectX version, audio controller,
audio codec, and language setting.
Tools
Click the tool button (
applications.
) to display tools for supported Dolby®
Dolby® Feature Launch buttons
Click the button of the feature you want to launch.
This motherboard only supports Dolby Digital Live.
Minimize
Click the minimize button (
) to minimize the window display.
Exit
Click the exit button (
) to exit the Realtek HD Audio Manager.
Configuration options
Click any of the tabs in this area to configure your audio settings. Click the
arrow button ( ) to display more options.
5-14
Chapter 5: Software support
Sound Effect
The Realtek® ALC882D Audio CODEC
allows you to set your listening
environment, adjust the equalizer,
set the karaoke, or select
pre-programmed equalizer settings
for your listening pleasure.
To set the sound effect options:
1. From the Realtek HD Audio
Manager, click the Sound
Effect tab.
2. Click the shortcut buttons or the drop-down menus for options on
changing the acoustic environment, adjust the equalizer, or set the
karaoke to your desired settings.
3. Click
to effect the Sound Effect settings and exit.
Mixer
The Mixer option allows you to
configure audio output (playback)
volume and audio input (record)
volume.
To set the mixer options:
1. From the Realtek HD Audio
Manager, click the Mixer tab.
2. Turn the volume buttons to
adjust the Playback and/or
Record volume.
The Mixer option activates voice input from all channels by default. Make
sure to set all channels to mute ( ) if you do not want voice input.
3. Make adjustments to Wave, SW Synth, Front, Rear, Subwoofer, CD
volume, Mic volume, Line Volume, and Stereo mix by clicking the
control tabs and dragging them up and down until you get the desired
levels.
4. Click
to effect the Mixer settings and exit.
ASUS P5WD2 Premium
5-15
Bass Management setting
Click this tab to manage your bass
settings.
To set the bass management
options:
1. From the Realtek HD Audio
Manager, click the Bass
Management setting tab.
2. Click <M> to display the
distance in meters, or <FT> to
display the distance in feet.
3. Adjust the values to your desired settings by entering a numeric value
in the boxes, or clicking the up/down arrow.
4. Click
5. Click
to test your settings.
to effect the Bass Management settings and exit.
Audio I/O
The Audio I/O option allows you
configure your input/output
settings.
To set the Audio I/O options:
1. From the Realtek HD Audio
Manager, click the Audio I/O
tab.
2. Click the drop-down menu to
select the channel
configuration.
3. The control settings window displays the status of connected devices.
Click
for analog and digital options.
4. Click <OK> to effect the Audio I/O settings and exit
5-16
Chapter 5: Software support
Microphone
The Microphone option allows you
configure your input/output settings
and to check if your audio devices
are connected properly.
To set the Microphone options:
1. From the Realtek HD Audio
Manager, click the
Microphone tab.
2. Click the Noise Suppression
option button to reduce the static background noise when recording.
3. Click the Acoustic Echo Cancellation option button to reduce the echo
from the front speakers when recording.
4. Click
to effect the Microphone settings and exit.
3D Audio Demo
The 3D Audio Demo option gives
you a demonstration of the 3D audio
feature.
To start the 3D Audio Demo:
1. From the Realtek HD Audio
Manager, click the 3D Audio
Demo tab.
2. Click the option buttons to
change the sound, moving
path, or environment settings.
3. Click
4. Click
to test your settings.
to effect the 3D Audio Demo settings and exit.
ASUS P5WD2 Premium
5-17
5.4 RAID configurations
The motherboard comes with the Silicon Image® 3132 and the Intel® ICH7R
Southbridge RAID controllers that allow you to configure IDE and Serial ATA
hard disk drives as RAID sets. The motherboard supports the following
RAID configurations.
RAID 0 (Data striping) optimizes two identical hard disk drives to read and
write data in parallel, interleaved stacks. Two hard disks perform the same
work as a single drive but at a sustained data transfer rate, double that of
a single disk alone, thus improving data access and storage. Use of two
new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data
from one drive to a second drive. If one drive fails, the disk array
management software directs all applications to the surviving drive as it
contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the
entire system. Use two new drives or use an existing drive and a new drive
for this setup. The new drive must be of the same size or larger than the
existing drive.
RAID 10 is data striping and data mirroring combined without parity
(redundancy data) having to be calculated and written. With the RAID 10
configuration you get all the benefits of both RAID 0 and RAID 1
configurations. Use four new hard disk drives or use an existing drive and
three new drives for this setup.
RAID 5 stripes both data and parity information across three or more hard
disk drives. Among the advantages of RAID 5 configuration include better
HDD performance, fault tolerance, and higher storage capacity. The RAID 5
configuration is best suited for transaction processing, relational database
applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.
Intel® Matrix Storage. The Intel® Matrix Storage technology supported
by the ICH7R chip allows you to create a RAID 0 and a RAID 1 set using
only two identical hard disk drives. The Intel® Matrix Storage technology
creates two partitions on each hard disk drive to create a virtual RAID 0
and RAID 1 sets. This technology also allows you to change the hard disk
drive partition size without losing any data.
If you want to boot the system from a hard disk drive included in a
created RAID set, copy first the RAID driver from the support CD to a
floppy disk before you install an operating system to the selected hard
disk drive. Refer to section “5.6 Creating a RAID driver disk” for details.
5-18
Chapter 5: Software support
5.4.1 Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal
performance, install identical drives of the same model and capacity when
creating a disk array.
To install the SATA hard disks for a RAID configuration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
5.4.2 Intel® RAID configurations
This motherboard supports RAID 0, RAID 1, and Intel® Matrix Storage
configurations for Serial ATA hard disks drives through the Intel® ICH7R
Southbridge chip.
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main Menu, select IDE Configuration, then press <Enter>.
3. Select the item Configure SATA As, then press <Enter> to display
the configuration options.
4. Select RAID from the Configure SATA As item options, then
press <Enter>.
5. Select the item Onboard Serial-ATA BOOTROM, press <Enter>,
then select Enabled from the options.
6. Save your changes, then exit the BIOS Setup.
Refer to the system or the motherboard user guide for details on
entering and navigating through the BIOS Setup.
ASUS P5WD2 Premium
5-19
Intel® Matrix Storage Manager Option ROM Utility
The Intel® Matrix Storage Manager Option ROM utility allows you to create
RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA
hard disk drives that are connected to the Serial ATA connectors
supported by the Southbridge.
To enter the Intel® Application Accelerator RAID Option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
Size
Type/Status(Vol ID)
0
1
2
3
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
XX.XXGB Non-RAID Disk
XX.XXGB Non-RAID Disk
XX.XXGB Non-RAID Disk
XX.XXGB Non-RAID Disk
[↑ ↓]-Select
[ESC]-Exit
[ENTER]-Select Menu
The navigation keys at the bottom of the screen allow you to move
through the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only
and may not exactly match the items on your screen.
5-20
Chapter 5: Software support
Creating a RAID 0 set (striped)
To create a RAID 0 set:
1. From the utility main menu, select 1. Create RAID Volume, then
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
GB
Create Volume
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑ ↓]-Change
[TAB]-Next
[ESC]-Previous Menu
[Enter]-Select
2. Enter a name for the RAID 0 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow
key to select RAID 0(Stripe), then press <Enter>.
4. When the Disks item is highlighted, press <Enter> to select the hard
disk drives to configure as RAID. This pop-up screen appears.
[ SELECT DISKS ]
Port Drive Model
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
Size Status
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[↑ ↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
5. Use the up/down arrow key to highlight a drive, then press <Space>
to select. A small triangle marks the selected drive. Press <Enter>
after completing your selection.
ASUS P5WD2 Premium
5-21
6. Use the up/down arrow key to select the stripe size for the RAID 0
array, then press <Enter>. The available stripe size values range from
4 KB to 128 KB. The default stripe size is 128 KB.
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
7. Key in the RAID volume capacity that you want, then press <Enter>.
The default value indicates the maximum allowed capacity.
8. Press <Enter> when the Create Volume item is highlighted. This
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press <Y> to create the RAID volume and return to the main menu, or
<N> to go back to the Create Volume menu.
5-22
Chapter 5: Software support
Creating a RAID 1 set (mirrored)
To create a RAID 1 set:
1. From the utility main menu, select 1. Create RAID Volume, then
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
Name: Volume1
RAID Level: RAID1(Mirror)
Disks: Select Disks
Strip Size: N/A
Capacity: XX.X GB
Create Volume
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑ ↓]-Change
[TAB]-Next
[ESC]-Previous Menu
[Enter]-Select
2. Enter a name for the RAID 1 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow
key to select RAID 1(Mirror), then press <Enter>.
4. When the Capacity item is highlighted, key in the RAID volume
capacity that you want, then press <Enter>. The default value
indicates the maximum allowed capacity.
5. Press <Enter> when the Create Volume item is highlighted. This
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
6. Press <Y> to create the RAID volume and return to main menu or <N>
to go back to Create Volume menu.
ASUS P5WD2 Premium
5-23
Creating a RAID 10 set (RAID 0+1)
To create a RAID 10 set:
1. From the utility main menu, select 1. Create RAID Volume, then
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
Name: Volume10
RAID Level: RAID10(RAID0+1)
Disks: Select Disks
Strip Size: 128KB
Capacity: XXX.X GB
Create Volume
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑ ↓]-Change
[TAB]-Next
[ESC]-Previous Menu
[Enter]-Select
2. Enter a name for the RAID 10 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow
key to select RAID 10(RAID0+1), then press <Enter>.
4. When the Stripe Size item is highlighted, press the up/down arrow
key to select the stripe size for the RAID 10 array, then press
<Enter>. The available stripe size values range from 4 KB to 128 KB.
The default stripe size is 64 KB.
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
5. Key in the RAID volume capacity that you want then press <Enter>
when the Capacity item is highlighted. The default value indicates
the maximum allowed capacity.
5-24
Chapter 5: Software support
6. Press <Enter> when the Create Volume item is highlighted. This
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
7. Press <Y> to create the RAID volume and return to the main menu or
<N> to go back to the Create Volume menu.
Creating a RAID 5 set (parity)
To create a RAID 5 set:
1. From the utility main menu, select 1. Create RAID Volume, then
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
Name: Volume5
RAID Level: RAID5(Parity)
Disks: Select Disks
Strip Size: 64KB
Capacity: 0.0 GB
Create Volume
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑ ↓]-Change
[TAB]-Next
[ESC]-Previous Menu
[Enter]-Select
2. Enter a name for the RAID 5 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow
key to select RAID 5(Parity), then press <Enter>.
ASUS P5WD2 Premium
5-25
4. The Disks item is highlighted, press <Enter> to select the hard disk
drives to configure as RAID. The following pop-up screen appears.
[ SELECT DISKS ]
Port Drive Model
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
Size Status
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[↑ ↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
5. Use the up/down arrow key to highlight the drive you want to set,
then press <Space> to select. A small triangle marks the selected
drive. Press <Enter> after completing your selection.
6. When the Stripe Size item is highlighted, press the up/down arrow
key to select the stripe size for the RAID 5 array, then press <Enter>.
The available stripe size values range from 4 KB to 128 KB. The
default stripe size is 64 KB.
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
7. Key in the RAID volume capacity that you want, then press <Enter>
when the Capacity item is highlighted. The default value indicates
the maximum allowed capacity.
8. Press <Enter> when the Create Volume item is highlighted. This
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press <Y> to create the RAID volume and return to the main menu or
<N> to go back to the Create Volume menu.
5-26
Chapter 5: Software support
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard
disk drives when you delete a RAID set.
To delete a RAID set:
1. From the utility main menu, select 2. Delete RAID Volume, then
press <Enter> to display this screen.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ DELETE VOLUME MENU ]
Name
Level
Drives
X
Capacity Status
XXX.XGB Normal
Bootable
Yes
Volume0
RAIDX(xxxxx)
[ HELP ]
Deleting a volume will destroy the volume data on the drive(s) and
cause any member disks to become available as non-RAID disks.
WARNING: EXISTING DATA WITHIN THIS VOLUME WILL BE LOST AND NON-RECOVERABLE.
[↑ ↓]-Select
[<ESC>]-Previous Menu
[<Del>]-Delete Volume
2. Use the up/down arrow key to select the RAID set you want to delete,
then press <Del>. This window appears.
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete volume “VolumeX”? (Y/N):
3. Press <Y> to delete the RAID set and return to the utility main menu;
otherwise, press <N> to return to the Delete Volume menu.
ASUS P5WD2 Premium
5-27
Resetting Disks to Non-RAID
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID,
then press <Enter> to display this screen.
[ RESET RAID DATA ]
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
Serial #
XXXXXXXX
XXXXXXXX
Size Status
XX.XGB Member Disk
XX.XGB Member Disk
Select the disks that should be reset.
[↑ ↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
2. Use the up/down arrow key to highlight the RAID set drive you want
to reset, then press <Space> to select.
3. Press <Enter> to reset the RAID set drive. A confirmation message
appears.
4. Press <Y> to reset the drive or press <N> to return to the utility main
menu.
Exiting the Intel® Matrix Storage Manager utility
To exit the utility:
1. From the utility main menu, select 4. Exit, then press <Enter>. This
window appears.
[ CONFIRM EXIT ]
Are you sure you want to exit? (Y/N):
2. Press <Y> to exit or press <N> to return to the utility main menu.
5-28
Chapter 5: Software support
Resetting a RAID set hard disks drive
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select [3. Reset Disks to Non-RAID],
then press <Enter> to display the following screen.
[
RESET RAID DATA
]
Resetting RAID data will remove the internal RAID structures
from the selected RAID disks. By removing these structures
the drive will revert back to a Non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model
0 STXXXXXXXXX
1 STXXXXXXXXX
Serial #
XXXXXXXX
XXXXXXXX
Size
XX.0GB
XX.0GB
Status
Member Disk
Member Disk
Select the disk that should be reset
[ ]-Previous/Next [Space]-Selects [Enter]-Selection Complete
2. Use the up or down arrow keys to highlight the RAID set drive you
want to reset, then press <Space> to select.
3. Press <Enter> to reset the RAID set drive. A confirmation window
appears.
4. Press <Y> to reset the drive; otherwise, press <N> to return to the
utility main menu.
5. Follow steps 2 to 4 to select and reset other RAID set drives.
ASUS P5WD2 Premium
5-29
5.5.3 Silicon Image® RAID configurations
The Silicon Image RAID controller supports RAID 0 and RAID 1 configuration.
Use the Silicon Image RAID utility to configure a disk array.
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced menu, select Onboard Devices
Configuration, then press <Enter>.
3. Select the Silicon 3132 Controller item, then press <Enter> to
display the configuration options.
4. Select [RAID Mode] from the options, then press <Enter>.
5. Save your changes, then exit the BIOS Setup.
Entering the Silicon Image BIOS RAID Configuration Utility
To enter the Silicon Image BIOS RAID configuration utility:
1. Restart the computer.
2. During POST, press <Ctrl+S> or <F4>. The Silicon Image BIOS RAID
Configuration Utility screen appears.
RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2004
MAIN MENU
HELP
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
Press “Enter” to create
RAID set
LOGICAL DRIVE
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
STXXXXXXXXX
STXXXXXXXXX
STXXXXXXXXX
STXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
↑↓:Select Menu
ESC:Previous Menu
Enter:Select
Ctrl-E:Exit
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
5-30
Chapter 5: Software support
RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2004
HELP
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
Press “Enter” to create
RAID set
LOGICAL DRIVE
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
STXXXXXXXXX
STXXXXXXXXX
STXXXXXXXXX
STXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
↑↓:Select Menu
ESC:Previous Menu
Enter:Select
Ctrl-E:Exit
Legend box
Help section
On the upper right corner of the screen is the Help message box. The
message describes the function of each menu item.
At the bottom of the screen is the legend box. The keys on the legend box
allow you to navigate through the setup menu options. The following lists
the keys found in the legend box and their corresponding functions.
↑, ↓
:
:
:
:
Select/Move to the next item
ESC
Previous Menu
Select
Enter
Ctrl-E
Exit
ASUS P5WD2 Premium
5-31
Creating as RAID 0 set (Striped)
To create a RAID 0 set:
MAIN MENU
1. From the Silicon Image
configuration utility
main menu, select
Create RAID set
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
RAID0
RAID1
RAID5
RAID10
SPARE DRIVE
JBOD
Low Level Format
Logical Drive Info
then press <Enter> to
display an option menu.
2. Select RAID 0, then press <Enter>.
MAIN MENU
3. Select your desired
method of configuration,
then press <Enter>.
Auto configuration
Manual configuration
Auto configuration
When you select Auto configuration, a confirmation message
appears. Press <Y> to automatically create a RAID 0 set.
By default, Auto configuration sets the array stripe size to 64 K
and sets the logical drives based on the installed physical drives.
Manual configuration
a. When you select Manual configuration, a chunk size menu
option appears. Use the up or down arrow keys to select a chunk
size appropriate to your drive usage, then press <Enter>.
MAIN MENU
Auto configuration
chunk size
Manual configuration
4K
8K
16K
32K
64K
128K
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
5-32
Chapter 5: Software support
b. When the selection bar
moves to the Physical
Drive section, use the up
or down arrow keys to
select the first drive of the
RAID set, then press
<Enter>.
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
c. Repeat step b to set the second, third, and fourth drive. The
number of available drives depends on the installed and enabled
physical drives in the system.
d. After selecting the drives, the utility allows you to input the RAID
size. Use the up or down arrow keys to set the RAID size, then
press <Enter>.
e. Press <Y> to create the RAID set, or <N> to return to the utility
main menu.
Creating as RAID 1 set (Mirrored)
To create a RAID 1 set:
MAIN MENU
1. From the Silicon Image
configuration utility
main menu, select
Create RAID set
then press <Enter> to
display an option menu.
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID5
RAID10
SPARE DRIVE
JBOD
2. Select RAID 1, then press <Enter>.
MAIN MENU
3. Select your desired
method of configuration,
then press <Enter>.
Auto configuration
Manual configuration
ASUS P5WD2 Premium
5-33
Auto configuration
When you select Auto configuration, a confirmation message
appears. Press <Y> to automatically create a RAID 1 set.
•
•
Auto-configuration creates a RAID 1 set without backup copy.
When migrating a single hard disk drive to a RAID 1 set, we
recommend that you use Manual configuration.
Manual configuration
a. When you select Manual
configuration, the
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
selection bar moves to the
Physical Drive section.
Use the up or down arrow
keys to select the source
drive, then press <Enter>.
b. Repeat step a to select the
target drive, then press
<Enter>.
c. After selecting the source and target drives, a pop-up menu
appears. Select an option, then press <Enter>. Refer to the options
description below.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
Create with data copy option allows you to copy the current data
from the source drive to the mirror drive. If you select this option, the
RAID 1 set must be repartitioned and reformatted to guarantee the
consistency of its contents. Select this option if you have important
data in your source hard disk drive.
Create without data copy option disables the disk copy function
of the mirrored set.
5-34
Chapter 5: Software support
d. If you selected
Create with
MAIN MENU
Auto configuration
Manual configuration
data copy, a
pop-up menu
online copy
offline copy
appears. Use the
up or down arrow
keys to select a
copy method, then
press <Enter>.
The online copy option automatically copies the data to the target
drives on the background while writing to the source drives. The offline
copy option allows you to copy the contents of the source drive to the
target drives immediately.
e. After copying the data to the target drives, a confirmation box
appears. Press <Y> to create the RAID set, or <N> to return to the
utility main menu.
A copy progress appears if you previously selected offline copy.
Silicon Image Array Management Software
The Silicon Image Array Management Software is a Windows®-based
application that allows you to create a RAID set(s) in Windows® XP
environment. This application is available from the support CD that came
with the motherboard package.
To launch the application from Windows® XP, click Start, select All
Programs > Silicon Image > Sam.
For details on the Silicon Image SATARaid™ RAID configuration, refer to
the “Sil3132 User’s Manual” in the motherboard support CD.
ASUS P5WD2 Premium
5-35
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows®
2000/XP operating system on a hard disk drive that is included in a RAID
set. You can create a RAID driver disk in DOS (using the Makedisk
application in the support CD) or in Windows® environment.
To create a RAID driver disk in DOS environment:
1. Place the motherboard support CD in the optical drive.
2. Restart the computer, then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the
support CD. Save your changes, then exit the BIOS Setup.
4. Restart the computer.
5. Press any key when prompted to boot from CD.
Loading FreeDOS FAT KERNEL GO!
Press any key to boot from CDROM...
The Makedisk menu appears.
1) Make ICH7 32-bit RAID driver disk
2) Make ICH7 64-bit RAID driver disk
3) Make Sil3132 32-bit RAID driver disk
4) Make Sil3132 64-bit RAID driver disk
5) Format floppy disk
6) FreeDOS command prompt
Please choose 1 ~ 6
6. Place a blank, high-density floppy disk to the floppy disk drive, then
press the corresponding number to format the floppy disk. The
following message displays on screen.
Insert new diskette for drive B:\
and press ENTER when ready...
7. Press <Enter> to format the floppy disk.
8. When finished, select the type of RAID driver disk you want to create
by typing the number preceding the option, then press <Enter>. The
following message appears on screen.
Please insert your formatted floppy to drive B:\
Press a key to continue.
The screens shown in this section are for reference only, and may not
exactly match the items on your screen.
5-36
Chapter 5: Software support
9. The RAID drivers are copied to the floppy disk. After creating a RAID
driver disk, eject the floppy disk, then write-protect it to prevent
computer virus infection.
10. Press any key to return to the Makedisk menu.
To create a RAID driver disk in Windows® environment:
1. Place the motherboard support CD in the optical drive.
2. When the Drivers menu appears, select the RAID driver disk you wish
to create:
•
Click Make ICH7 32 bit RAID Driver Disk to create an Intel®
ICH7 RAID driver disk for a 32-bit system.
•
Click Make ICH7 64 bit RAID Driver Disk to create an Intel®
ICH7 RAID driver disk for a 64-bit system.
•
•
Click Make Silicon Image 32bit RAID Driver Disk to create
a Silicon Image® RAID driver disk for a 32-bit system.
Click Make Silicon Image 64bit RAID Driver Disk to create
a Silicon Image® RAID driver disk for a 64-bit system.
O r
Browse the contents of the support CD to locate the driver disk
utility:
•
ICH7 32-bit RAID Driver Disk/
ICH7 64-bit RAID Driver Disk:
Refer to \Drivers\Chipset\Intel\MSM\Readme.txt
•
Silicon Image 32-bit RAID Driver Disk:
\Drivers\Sil3132\32bit\DOS\RAID
• Silicon Image 64-bit RAID Driver Disk:
\Drivers\Sil3132\64bit\DOS\RAID
Refer to section “5.2.2 Drivers menu” for details.
ASUS P5WD2 Premium
5-37
3. Insert a formatted high-density floppy disk to the floppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1. Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the F 6 key if you are
installing a third-party SCSI or RAID driver.
2. Press <F6>, then insert the RAID driver disk to the floppy disk drive.
3. Follow screen instructions to install the RAID drivers.
5-38
Chapter 5: Software support
The Appendix describes the CPU
features and technologies that the
motherboard supports.
CPU features
A
Chapter summary
A
A.1
A.2
A.3
Intel® EM64T ........................................................................A-1
Enhanced Intel SpeedStep® Technology (EIST) ....................A-1
Intel® Hyper-Threading Technology......................................A-3
ASUS P5WD2 Premium
A.1 Intel® EM64T
•
•
The motherboard is fully compatible with Intel® Pentium® 4 LGA775
processors running on 32-bit operating systems.
The motherboard comes with a BIOS file that supports EM64T. You
can download the latest BIOS file from the ASUS website
(www.asus.com/support/download/) if you need to update the BIOS
file. See Chapter 4 for details.
•
•
Visit www.intel.com for more information on the EM64T feature.
Visit www.microsoft.com for more information on Windows® 64-bit OS.
Using the Intel® EM64T feature
To use the Intel® EM64T feature:
1. Install an Intel® Pentium® 4 CPU that supports the Intel® EM64T.
2. Install a 64-bit operating system (Windows® XP Professional x64
Edition or Windows® Server 2003 x64 Edition).
3. Install the 64-bit drivers for the motherboard components and devices
from the support CD.
4. Install the 64-bit drivers for expansion cards or add-on devices, if any.
Refer to the expansion card or add-on device(s) documentation, or visit
the related website, to verify if the card/device supports a 64-bit system.
A.2 Enhanced Intel SpeedStep®
Technology (EIST)
•
The motherboard comes with a BIOS file that supports EIST. You can
download the latest BIOS file from the ASUS website
(www.asus.com/support/download/) if you need to update the
BIOS. See Chapter 4 for details.
•
Visit www.intel.com for more information on the EIST feature.
A.2.1 System requirements
Before using EIST, check your system if it meets the following
requirements:
•
•
•
Intel® Pentium® 4 processor with EIST support
BIOS file with EIST support
Operating system with EIST support (Windows® XP SP2/Windows®
Server 2003 SP1/Linux 2.6 kernel or later versions)
ASUS P5WD2 Premium
A.2.2 Using the EIST
To use the EIST feature:
1.
2.
Turn on the computer, then enter the BIOS Setup.
Go to the Advanced Menu, highlight CPU Configuration,
then press <Enter>.
3.
Set the Intel(R) SpeedStep Technology item to [Automatic],
then press <Enter>. See page 4-26 for details.
4.
5.
Press <F10> to save your changes and exit the BIOS setup.
After the computer restarts, right click on a blank space on the desktop,
then select Properties from the pop-up menu.
6.
7.
When the Display Properties
window appears, click the
Screen Saver tab.
Click the Power button on the
Monitor power section to open
the Power Options
Properties window.
8.
9.
On the Power schemes section,
click , then select any option
except Home/Office Desktop
or Always On.
Click Apply, then click OK.
10. Close the Display Properties
window.
After you adjust the power
scheme, the CPU internal
frequency slightly decreases
when the CPU loading is low.
The screen displays and procedures may vary depending on the
operating system.
A-2
Appendix: CPU features
A.3 Intel® Hyper-Threading Technology
•
•
The motherboard supports Intel® Pentium® 4 LGA775 processors
with Hyper-Threading Technology.
Hyper-Threading Technology is supported under Windows® XP/2003
Server and Linux 2.4.x (kernel) and later versions only. Under Linux, use
the Hyper-Threading compiler to compile the code. If you are using any
other operating systems, disable the Hyper-Threading Technology item
in the BIOS to ensure system stability and performance.
•
•
Installing Windows® XP Service Pack 1 or later version is recommended.
Make sure to enable the Hyper-Threading Technology item in BIOS
before installing a supported operating system.
•
For more information on Hyper-Threading Technology, visit
www.intel.com/info/hyperthreading.
Using the Hyper-Threading Technology
To use the Hyper-Threading Technology:
1. Install an Intel® Pentium® 4 CPU that supports Hyper-Threading
Technology.
2. Power up the system and enter the BIOS Setup. Under the Advanced
Menu, make sure that the item Hyper-Threading Technology is
set to Enabled. See page 4-26 for details.
The BIOS item appears only if you installed a CPU that supports
Hyper-Threading Technology.
3. Restart the computer.
ASUS P5WD2 Premium
A-4
Appendix: CPU features
|