PB278Q Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, in case use at a PC then it should
use the monitor only with computers which have appropriate
configured receptacles marked between 100-240V AC.
•
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
The wall socket shall be installed near the equipment and shall be
easily accessible.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LED. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a
task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® PB278Q Series LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the PB278Q Series brings you!
1.2
Package contents
Check your PB278Q Series LCD monitor package for the following items:
LCD monitor
Power Cord
VGA Cable
DVI Cable (Dual link)
DisplayPort Cable
HDMI Cable
Audio Cable
Quick Start Guide
Warranty Card
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor PB278Q Series
1-1
1.3
Assembling the monitor
To assemble the monitor:
1. Place the display flat on a cloth on the table, assemble the base
according to the drawing and use a coin to turn the screw tight.
2. Put the cable clip inset the hole of stand, and adjust the monitor to
the angle that is most comfortable for you.
1
2
1-2
Chapter 1: Product Introduction
1.4
Monitor introduction
1.4.1
Front of the LCD monitor
4
2
7
6
5
3
1
1.
Power Button/Power Indicator:
Press this button to turn the monitor on/off.
The color definition of the power indicator is shown below.
•
•
Status
Blue
Description
ON
Amber
OFF
Standby mode
OFF
2.
3.
Input Select Button:
•
Press this button to select input source.
Button:
•
•
Press this button to increase values or to move your selection
right/up.
Brightness hotkey
4. MENU Button:
Press this button to turn on the OSD menu, or to enact the
selected OSD menu item.
•
ASUS LCD Monitor PB278Q Series
1-3
•
Press this button to exit the hotkey OSD menu.
5.
6.
Button:
•
•
Press this button to decrease values or to move your selection
left/down.
Volume hotkey
QuickFit button:
•
•
Press this button to activate the QuickFit function designed for
alignment.
The QuickFit function contains 9 pages of common grid patterns,
paper sizes, and photo sizes. (Please refer to 1.3.3 QuickFit
Function)
7.
Button:
•
•
Press this button to select a desired preset mode.
Press this button to exit the OSD menu or to go back to the
previous menu when the OSD menu is active.
•
Press this button for 2 ~ 4 seconds to automatically adjust the
image to its optimized position, clock, and phase (for VGA mode
only).
1-4
Chapter 1: Product Introduction
1.4.2
Rear of the LCD monitor
2
3
4
5
6
7
8
1
Rear connectors
1. Kensington lock slot.
2. AC-IN port: This port connects the power cord.
3. DisplayPort. This port is for connection with a DisplayPort compatible
device.
4. VGA port: This 15-pin port is for PC VGA connection.
5. DVI port: This 24-pin port is for PC (Personal Computer) DVI-D digital
signal connection.
6. HDMI port: This port is for connection with an HDMI compatible
device.
While the PB278Q supports up to 2560 x 1440 WQHD resolutions
including DVI-dual link, HDMI and DisplayPort, some graphics
cards only support up to 1920 x 1200 resolution content
transmission via HDMI. Please check with your local distributor or
retailer on the hardware limitations of your laptop or desktop.
7. Audio Line-in Port
8. Earphone jack.
ASUS LCD Monitor PB278Q Series
1-5
1.4.3
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo
size.
1. Grid patterns
The grid patterns facilitate designers and users to organize content and layout on a
page and achieve a consistent look and feel.
Alignment Grid
2. Paper size
QuickFit provides numerous commonly used standard paper sizes for users to
view their documents in real size on the screen.
Letter
1-6
Chapter 1: Product Introduction
3. Photo size
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in real size
on the screen.
Photo 4x6, 3x5, 2x2
Photo 8x10, 5x7
ASUS LCD Monitor PB278Q Series
1-7
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
•
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
Hold the stand of the monitor while removing the screws.
Figure 1
Figure 2
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/
load 28.8 kg (Screw size: 4 x 10 mm).
2-1
Chapter 2: Setup
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling when you change its
angle.
You can adjust the monitor’s angle from +20˚ to -5˚ and it allows 60˚
swivel adjustment from either left or right. You can also adjust the
monitor’s height within +/- 12cm.
-5° ~ +20°
60°
60°
12cm
0°
Pivoting the monitor
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise to the angle you need.
-5° ~ +20°
2
3
1
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
ASUS LCD Monitor PB278Q Series
2-2
2.3
Connecting the cables
Connect the cables as the following instructions:
•
•
To connect the power cord: Connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
To connect the VGA/HDMI/DVI/DisplayPort cable:
a. Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s VGA/
HDMI/DVI/DisplayPort jack.
b. Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your
computer’s VGA/HDMI/DVI/DisplayPort jack.
c. Tighten the two screws to secure the VGA/DVI connector.
•
•
To connect the audio cable: Plug one end of the audio cable to the
monitor’s Audio Line-in Port
.
Connect the other end of the audio cable to your
computer’s audio Port.
To use the earphone: Connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2-3
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
PB278
Standard Mode
sRGB Mode
Splendid
Color
Image
Scenery Mode
Theater Mode
Sound
Input Select
System Setup
User Mode
Move
Menu
Exit
1. Press the MENU button to activate the OSD menu.
2. Press and to navigate through the functions. Highlight
and activate the desired function by pressing the MENU button. If the
function selected has a sub-menu, press and again to
navigate through the sub-menu functions. Highlight and activate the
desired sub-menu function by pressing the MENU button.
3. Press
function.
and
to change the settings of the selected
4. To exit the OSD menu, press the
step 3 to adjust any other function.
button. Repeat step 2 and
ASUS LCD Monitor PB278Q Series
3-1
3.1.2
OSD Function Introduction
1.
Splendid
This function contains five sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to maintain
your setting or return to the preset mode.
PB278
Standard Mode
sRGB Mode
Splendid
Color
Image
Scenery Mode
Theater Mode
Sound
Input Select
System Setup
User Mode
Move
Menu
Exit
•
•
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence.
sRGB Mode: Compatible with sRGB color space. sRGB mode is
the best choice for document editing.
Color
Space
White Point
Xw Yw
sRGB 0.3127 0.329
Primaries
Xr
0.64
Yr
0.33
Xg
0.3
Yg
0.6
Xb
0.15
Yb
0.06
•
•
Scenery Mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Intelligence.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence.
3-2
Chapter 3: General Instruction
•
User Mode: More items are adjustable in the Color menu.
Standard sRGB Scenery Theater
User
Mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Function
Mode
Yes
Yes
No
Mode
Yes
No
No
No
Mode
Yes
Yes
Yes
No
Mode
Yes
Yes
Yes
No
Brightness
Contrast
Saturation
Hue
Color Temperature
Gamma
Advanced Gain
No
Yes
Yes
No
No
No
No
No
Yes
No
No
No
Yes
No
No
No
Setting
Offset
No
ASUS LCD Monitor PB278Q Series
3-3
2.
Color
Select the image color you like from this function.
PB278
Splendid
Color
Brightness
Contrast
Saturation
Hue
100
80
50
Image
50
Sound
Color Temp.
6500k
Input Select
System Setup
Gamma
22
Advanced Setting
Color Reset
Menu
Move
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is also a hot key to activate this function.
•
•
•
•
Contrast: The adjusting range is from 0 to 100.
Saturation: The adjusting range is from 0 to 100.
Hue: Shift the image color between green and purple.
Color Temp.: Contain four color modes: 9300K, 6500K, 5500K,
and 5000K.
The DDC/CI tool installed at your PC will display “User 1” instead of the
“5500K” color temperature you selected for this monitor.
•
•
Gamma: Set the color mode to 2.2 or 1.8.
Advanced Setting:
•
•
Adjust the gain levels for R, G, B.
Adjust the black level offset values for R, G, B.
•
Color Reset:
•
Current mode color reset:
Reset the color settings of current color mode to the factory
default value.
•
All modes color reset:
Reset the color settings of all color modes to the factory
default value.
3-4
Chapter 3: General Instruction
3.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control, ASCR,
Position (VGA only), and Focus (VGA only) from this main function.
PB278
Splendid
Color
Sharpness
Trace Free
Aspect Control
ASCR
50
60
Image
Sound
Full
OFF
Position
Input Select
Focus
System Setup
AUTO Adjust.
Move
Menu
Exit
•
•
•
Sharpness: Adjust the picture sharpness. The adjusting range is
from 0 to 100.
Trace Free: Speed up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, “1:1”, or
“Over Scan”. (The “4:3” ratio is only for 4:3 or 5:4 image source.
The “Over Scan” ratio is only available for HDMI input.)
•
•
ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio)
function. (Only available at Scenery Mode and Theater Mode.)
Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
•
•
Focus: Reduce Horizontal-line noise and Vertical-line noise of the
image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100 (only available for VGA input).
AUTO Adjust.: Automatically adjust the image to its optimized
position, clock, and phase. (Only available for VGA input.)
•
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.
ASUS LCD Monitor PB278Q Series
3-5
4.
Sound
Adjust the sound settings to your preference.
PB278
Splendid
Color
Volume
Mute
50
OFF
Image
Source
Line In
Sound
Input Select
System Setup
Move
Menu
Exit
•
•
•
Volume: Adjust the output volume level.
Mute: Mute the output volume.
Source: Adjust audio source to “Line In” or “HDMI” (only available
for HDMI input);
Adjust audio source to “Line In” or “DisplayPort” (only available for
DisplayPort input).
5.
Input Select
Select the input source from VGA, DVI, HDMI, or DisplayPort.
PB278
Splendid
Color
VGA
DVI
Image
HDMI
Sound
DisplayPort
Input Select
System Setup
Move
Menu
Exit
3-6
Chapter 3: General Instruction
6.
System Setup
Adjusts the system configuration.
PB278
Splendid
Color
Splendid Demo Mode
OSD Setup
OFF
Image
Information
Sound
English
ON
Language
Input Select
System Setup
Power Indicator
All Reset
Move
Menu
Exit
•
•
Splendid Demo Mode: Split the screen into two for Splendid
modes comparison. (Scenery mode/Theater mode only)
OSD Setup: Adjust the horizontal position (H-Position), vertical
position (V-Position), OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
•
•
Information: Display the monitor information.
Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, Japanese, Persian, Thai,
Indonesian, Poland, Turkey, Portugal, Czech, Croatia, Hungary,
Romania, Korean.
•
•
Power Indicator: Turn the power LED indicator on/off.
All Reset: Set to “Yes” to revert all settings to the factory default
mode.
ASUS LCD Monitor PB278Q Series
3-7
3.2
Specifications
Model
Panel Size
PB278Q
27.0”W (68.6 cm)
1920x1080 (VGA); 2560 x 1440 (DVI, HDMI,
DP)
Max. Resolution
Brightness (Typ.)
300cd/m2
Intrinsic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
Display Colors
1000:1
178°(V) /178°(H)
16.7 M(True 8bit)
5ms (Gray to Gray)
Response Time
Satellite Speaker
3W x 2 stereo
Earphone Output
Sound from HDMI
HDMI input
Yes
Yes
Yes
DVI input
DVI (dual link) with HDCP
Yes
D-Sub input
DisplayPort input
Audio Line-in
Yes
Yes
Power ON Consumption
Chassis Colors
< 60W
Black
Tilt
-5° ~ +20°
Swivel(angle)
+60°~-60°
Pivot(angle/direction)
Height Adjustment (mm)
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
90°(clockwise)
Yes(0~120mm)
Yes (100mm x 100mm)
643 x 552.3 x 218 mm
755 x 224 x 470 mm
8.8 kg
12 kg
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
3-8
Chapter 3: General Instruction
3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
Possible Solution
• Press the button to check if the monitor is in
the ON mode.
• Check if the power cord is properly connected
to the monitor and the power outlet.
The power LED lights amber • Check if the monitor and the computer are in
and there is no screen image
the ON mode.
•
•
Make sure the signal cable is properly
connected the monitor and the computer.
Inspect the signal cable and make sure none
of the pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or
dark
•
Adjust the Contrast and Brightness settings
via OSD.
Screen image is not centered
or sized properly
• Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
•
•
Screen image bounces or a
wave pattern is present in the
image
Make sure the signal cable is properly
connected to the monitor and the computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color
defects (white does not look
white)
•
Inspect the signal cable and make sure that
none of the pins are bent.
• Perform Reset via OSD.
•
Adjust the R/G/B color settings or select the
Color Temperature via OSD.
Screen image is blurry or
fuzzy
• Press the
button for two seconds to
automatically adjust the image (for VGA mode
only).
Adjust the Phase and Clock settings via OSD.
•
No sound or sound is low
• Ensure that the audio cable is properly
connected to the monitor and the computer.
•
Adjust the volume settings of both your monitor
and computer.
• Ensure that the computer sound card driver is
properly installed and activated.
HDMI cannot support WQHD
•
While the PB278Q supports up to 2560 x 1440
WQHD resolutions including DVI-dual link,
HDMI and DisplayPort, some graphics cards
only support up to 1920 x 1200 resolution
content transmission via HDMI. Please check
with your local distributor or retailer on the
hardware limitations of your laptop or desktop.
ASUS LCD Monitor PB278Q Series
3-9
3.4
Supported Timing List
PC Supported Primary Timing
Resolution
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1152x864
1280x960
1280x1024
Refresh Rate
Horizontal Frequency
31.469kHz
37.861kHz
37.5kHz
60Hz
72Hz
75Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
85Hz
75Hz
60Hz
60Hz
43.269kHz
35.156kHz
37.879kHz
48.077kHz
46.875kHz
53.674kHz
48.363kHz
56.476kHz
60.023kHz
68.677kHz
67.5kHz
60kHz
63.981kHz
1280x1024
1440x900
1440x900
1680x1050
1920x1080
75Hz
60Hz
75Hz
60Hz
60Hz
79.976kHz
55.935kHz
70.635kHz
65.29kHz
67.5kHz
IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
Refresh Rate
Horizontal Frequency
640x350
640x350
720x400
720x400
70Hz
85Hz
70Hz
85Hz
31.469kHz
37.861kHz
31.469kHz
37.927kHz
MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
640x480
832x624
Refresh Rate
Horizontal Frequency
35kHz
49.725kHz
67Hz
75Hz
VESA Modes, User Available Timing
Resolution
Refresh Rate
Horizontal Frequency
31.02
848x480
1280x720(RB)
1280x720
1280x720
1280x768(RB)
1280x800(RB)
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
44.444kHz
44.772kHz
56.456kHz
47.396kHz
49.306kHz
3-10
Chapter 3: General Instruction
1280x800
1280x800
1366x768
60Hz
75Hz
60Hz
60Hz
75Hz
60Hz
60Hz
49.702kHz
62.795kHz
47.712kHz
55.469kHz
70.635kHz
64.674kHz
66.587kHz
1440x900(RB)
1440x900
1680x1050(RB)
1920x1080
WQHD Mode (DVI (dual link), HDMI and DP only)
2560x1440
60Hz
88.787kHz
* While the PB278Q supports up to 2560 x 1440 WQHD resolutions including DVI-dual link,
HDMI and DisplayPort, some graphics cards only support up to 1920 x 1200 resolution content
transmission via HDMI. Please check with your local distributor or retailer on the hardware
limitations of your laptop or desktop.
SD/HD Timings (HDMI input only)
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary
Timings of (HDMI input only)
Resolution
640x480P
720x480P
720x576P
1280x720P
Refresh Rate
59.94 / 60Hz
59.94 / 60Hz
50Hz
Horizontal Frequency
31.469 / 31.5kHz
31.469 / 31.5kHz
31.25kHz
50Hz
37.5kHz
1280x720P
1920x1080i
1920x1080i
59.94 / 60Hz
50Hz
44.955 /45kHz
28.125kHz
59.94 / 60Hz
33.716 / 33.75kHz
HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional
Timings of (HDMI input only)
Resolution
Refresh Rate
Horizontal Frequency
1440x480P
1440x576P
1920x1080P
1920x1080P
59.94 / 60Hz
50Hz
31.469 / 31.5kHz
31.25kHz
50Hz
56.25kHz
59.94 / 60Hz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor PB278Q Series
3-11
|