®
P4T-F
Intel® 850 ATX Motherboard
USER’S MANUAL
ASUS CONTACT INFORMATION
ASUSTeK COMPUTER INC. (Asia-Pacific)
Marketing
Address:
Telephone:
Fax:
150 Li-Te Road, Peitou, Taipei, Taiwan 112
+886-2-2894-3447
+886-2-2894-3449
Email:
Technical Support
MB/Others (Tel): +886-2-2890-7121 (English)
Notebook (Tel):
+886-2-2890-7122 (English)
Desktop/Server (Tel):+886-2-2890-7123 (English)
Fax:
+886-2-2890-7698
Email:
WWW:
FTP:
ftp.asus.com.tw/pub/ASUS
ASUS COMPUTER INTERNATIONAL (America)
Marketing
Address:
6737 Mowry Avenue, Mowry Business Center, Building 2
Newark, CA 94560, USA
Fax:
Email:
+1-510-608-4555
Technical Support
Fax:
+1-510-608-4555
ftp.asus.com/Pub/ASUS
Email:
WWW:
FTP:
ASUS COMPUTER GmbH (Europe)
Marketing
Address:
Fax:
Harkortstr. 25, 40880 Ratingen, BRD, Germany
+49-2102-442066
Email:
[email protected] (for marketing requests only)
Technical Support
Hotline:
Fax:
Support (Email):
WWW:
MB/Others: +49-2102-9599-0 Notebook: +49-2102-9599-10
+49-2102-9599-11
FTP:
ftp.asuscom.de/pub/ASUSCOM
ASUS P4T-F User’s Manual
3
CONTENTS
1. INTRODUCTION ............................................................................. 7
1.1 How This Manual Is Organized .................................................. 7
1.2 Item Checklist ............................................................................. 7
2. FEATURES ........................................................................................ 8
2.1 The ASUS P4T-F ........................................................................ 8
2.2 P4T-F Motherboard Components.............................................. 12
3. HARDWARE SETUP ...................................................................... 14
3.1 P4T-F Motherboard Layout ...................................................... 14
3.2 Layout Contents ........................................................................ 15
3.3 Hardware Setup Procedure ....................................................... 16
3.4 Motherboard Settings ................................................................ 17
3.5 System Memory ........................................................................ 23
3.5.1 CPU Installation ............................................................ 25
3.5 Central Processing Unit (CPU) ................................................. 25
3.5.2 CPU Heatsink Retention Module Installation ............... 26
3.6 Expansion Cards ....................................................................... 29
3.6.1 Installing an Expansion Card......................................... 29
3.6.2 Assigning IRQs for Expansion Cards............................ 30
3.8 External Connectors .................................................................. 32
3.9 Starting Up the First Time ........................................................ 43
4. BIOS SETUP..................................................................................... 45
4.1 Managing and Updating Your BIOS ......................................... 45
4.1.1 Upon First Use of the Computer System ....................... 45
4.1.2 Updating BIOS Procedures ........................................... 46
4.2 BIOS Setup Program ................................................................ 49
4.2.1 BIOS Menu Bar ............................................................. 50
4.2.2 Legend Bar .................................................................... 50
4.3 Main Menu ................................................................................ 52
4.3.1 Primary & Secondary Master/Slave .............................. 53
4.3.2 Keyboard Features ......................................................... 56
4.4 Advanced Menu ........................................................................ 58
4.4.1 Chip Configuration ........................................................ 61
4.4.2 I/O Device Configuration .............................................. 63
4.4.3 PCI Configuration ......................................................... 65
4.4.4 Shadow Configuration ................................................... 67
4.5 Power Menu .............................................................................. 68
4
ASUS P4T-F User’s Manual
CONTENTS
4.5.1 Power Up Control .......................................................... 70
4.5.2 Hardware Monitor ......................................................... 71
4.6 Boot Menu ................................................................................ 72
4.7 Exit Menu ................................................................................. 74
5. SOFTWARE SETUP ....................................................................... 77
5.1 Install Operating System........................................................... 77
5.2 Start Windows ........................................................................... 77
5.3 P4T-F Motherboard Support CD............................................... 78
6. SOFTWARE REFERENCE ........................................................... 80
6.1 ASUS Live Update ................................................................... 80
6.2 ASUS PC Probe ........................................................................ 81
6.3 CyberLink PowerPlayer SE ...................................................... 86
6.4 CyberLink VideoLive Mail ....................................................... 87
7. APPENDIX....................................................................................... 89
7.1 Glossary .................................................................................... 89
INDEX ................................................................................................... 95
ASUS P4T-F User’s Manual
5
FCC & DOC COMPLIANCE
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with manufacturer's instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications to this product not expressly ap-
proved by the manufacturer could void any assurances of safety or performance
and could result in violation of Part 15 of the FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
6
ASUS P4T-F User’s Manual
1. INTRODUCTION
1.1 How This Manual Is Organized
This manual is divided into the following sections:
1. INTRODUCTION
2. FEATURES
3. HARDWARE SETUP
4. BIOS SETUP
Manual information and checklist
Production information and specifications
Intructions on setting up the motherboard.
Intructions on setting up the BIOS
5. SOFTWARE SETUP
6. SOFTWARE REFERENCE
7. APPENDIX
Intructions on setting up the included software
Reference material for the included software
Optional items and general reference
1.2 Item Checklist
Check that your package is complete. If you discover damaged or missing items,
contact your retailer.
Package Contents
(1) ASUS Motherboard
Optional Items
ASUS IrDA-compliant infrared
module
(1) 40-pin 80-conductor ribbon
cable for internal UltraDMA33/
66/100 IDE drives
Rambus
LAN Card
1394 Card
(1) Ribbon cable for master and slave
IDE drives
(1) Ribbon cable for (1) 5.25” and (2)
3.5” floppy disk drives
(1) ASUS 2-port USB connector set
with bracket
(1) Bag of spare jumpers
(1) Support drivers and utilities
(1) This Motherboard User’s Manual
(1) CPU Retention Module
(2) ASUS C-RIMM Continuity
RIMM
ASUS P4T-F User’s Manual
7
2. FEATURES
2.1 The ASUS P4T-F
The ASUS P4T-F motherboard is carefully designed for the demanding PC user
who wants advanced features processed by the fastest processors.
2.1.1 Specifications
•
Intel Processor Support: Intel Socket 423 Pentium® 4 processors, 1.3 to 1.8
GHz and higher.
•
Intel 850 Chipset: Features the Intel® 850 chipset (82850 Tehama Memory Con-
troller Hub, I/O Controller and Firmware Hub) with support for AGP 4X Pro
Mode, (1.5 volt only); 400MHz Front Side Bus (FSB); and dual channel RDRAM.
•
Intel ICH2: The Intel I/O Controller Hub 2 (82801 ICH2) features support for
UltraDMA/100, which allows burst mode data transfer rates of up to 100MB/
sec; and two USB controllers for a total of 4 USB ports.
•
PC800 Memory Support: Equipped with four Rambus Inline Memory Module
(RIMM) sockets to support Intel PC800/PC600-compliant Rambus DRAMs
(RDRAMs) (available in 64, 96, 128, 192, 256, 512MB) up to 2GB. These
RDRAMs are necessary to meet the increase in processor performance and
multimedia and 3D functions, especially where high bandwidth is required.
•
•
Intel® Accelerated Hub Architecture: Features a dedicated high speed hub
link between the ICH2 and MCH with a bandwidth of 266MB/sec – twice the
maximum bandwidth of the PCI bus.
AGP Pro Slot: Comes with an Accelerated Graphics Port Pro slot that
supports AGP cards for high performance, component level interconnect
targeted at 3D graphical applications using a 4X mode bus. The slot is keyed to
support only the latest 1.5 volt AGP cards: i.e.: ASUS V3800 and newer
versions.
•
•
•
JumperFree™ Mode: Now processor settings and easy overclocking of
frequency and Vcore voltage can be controlled through the BIOS firmware if
JumperFree™ mode is enabled.
Easy-to-Use DIP Switches: As an alternative to JumperFree Mode™, jumpers
and DSW switches are included to allow manual adjustment of the processor’s
external frequency.
UltraDMA/100 Support: Comes with an onboard PCI Bus Master IDE controller
with two connectors that support four IDE devices on two channels. Supports
UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4 and Bus Master
IDE DMA Mode 2, and Enhanced IDE devices, such as DVD-ROM, CD-ROM,
CD-R/RW, LS-120, and Tape Backup drives.
•
More USB Ports: Supports a total of 4 USB ports for exceptiona peripheral
connectivity options.
ASUS P4T-F User’s Manual
8
2. FEATURES
•
•
CNR Support: A Communication and Networking Riser (CNR) slot provides
an interface to support very affordable multichannel audio, V.90 analog modem,
Home PNA, 10/100 Ethernet networking, and a USB hub.
PC Health Monitoring: An easy way to examine and manage system status
information, such as CPU and systerm voltages, temperatures, and fan status
through the onboard hardware and the bundled ASUS PC Probe or Intel LDCM
software.
•
•
•
•
Legacy Free: Provides five 32-bit PCI (PCI 2.2 compliant) with no ISA,
eliminating bottlenecks and system memory management issues. All PCI slots
can support Bus Master PCI cards, such as SCSI or LAN cards. (PCI supports up
to 133MB/s maximum throughput.)
Low Pin Count (LPC) Super Multi-I/O: Provides two high-speed UART
ompatible serial ports and one parallel port with EPP and ECP capabilities.
UART2 can also be directed from COM2 to the Infrared Module for wireless
connections.
Enhanced ACPI & Anti-Boot Virus Protection: Programmable BIOS (Flash
EEPROM), offering enhanced ACPI for Windows 98/2000/Millenium compat-
ibility, built-in firmware-based virus protection, and autodetection of most de-
vices for virtually automatic setup.
Smart BIOS: 2Mbit firmware gives a new easy-to-use interface for more
control and protection for the motherboard. Supports Vcore and CPU/RDRAM
frequency adjustments, boot block write protection, and HD/SCSI/MO/ZIP/CD/
Floppy boot selection.
•
•
IrDA: Supports an optional infrared port module for a wireless interface.
Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI
master bus to the memory and processor.
•
•
Onboard LED: Signals AC power is okay.
Desktop Management Interface (DMI): Supports DMI through BIOS, which
allows hardware to communicate within a standard protocol creating a higher
level of compatibility. (Requires DMI-enabled components.)
2.1.2 Optional Components
•
AC’97 Codec: The latest high-performance mini-chipset supports hi-fidelity
18-bit stereo, full duplex audio performance. The chipset supporst up to four
analog line inputs, two stereo outputs, and one mono output channel. Added
featuers include 3D stereo enhancement, and extra true line-level out for head-
phones and speaker amplifiers.
•
Auxillary Power Connector: Extra power back-up available with this 6 tooth
connector.
ASUS P4T-F User’s Manual
9
2. FEATURES
2.1.3 Performance Features
•
High-Speed Data Transfer Interface: Onboard IDE Bus Master controller with
two connectors that support four IDE devices in two channels. Supports
UltraDMA/100/66, UltraDMA/33 (IDE DMA Mode 2), PIO Modes 3 & 4, and
supports Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW,
LS-120, and Tape Backup drives. UltraDMA/100 is backward compatible with
DMA/66, DMA/33, and DMA and with existing DMA devices and systems so
there is no need to upgrade current EIDE/IDE drives and host systems.
(UltraDMA/66/100 requires a 40-pin 80-conductor cable to be enabled.)
•
•
RDRAM Optimized Performance: This motherboard supports Rambus
Dynamic RandomAccess Memory (RDRAM). While PC100 SDRAM modules
operate at 100MHz with a peak bandwidth of 0.8GB/s, MCH dual channel Rambus
DRAMs can operate at up to 400MHz with a peak bandwidth of 3.2GB/s.
ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also
implemented on all ASUS smart series motherboards. ACPI provides more
Energy Saving Features for future operating systems (OS) supporting OS Direct
Power Management (OSPM) functionality. With these features implemented in
the OS, PCs can be ready around the clock, yet satisfy all the energy saving
standards. To realize the benefits of ACPI, an ACPI-supported OS, such as
Windows 98/2000/Millenium, must be used.
•
•
Suspend and Go: Suspend-to-RAM (STR) provides maximum power savings
as an alternative to leaving the computer ON and QuickStart™ so that you do
not have to wait for a long time for system bootup.
New Compliancy: Both the BIOS and hardware levels of the motherboard meet
the stringent requirements for PC 99 certification. The new PC 99 requirements
for systems and components are based on the following high-level goals: sup-
port for Plug and Play compatibility and power management for configuring
and managing all system components, and 32-bit device drivers and installation
procedures for Windows 95/NT and later. Color-coded connectors and descrip-
tive icons make identification easy as required by PC 99.
ASUS P4T-F User’s Manual
10
2. FEATURES
2.1.4 Intelligence
•
Auto CPU Throttling Function: Incorporated into this motherboard is a new
technology to enable Pentium 4 processors auto throttling function. When auto
throttling is enabled, the CPU with throttle down to 50% of its duty cycle when
the CPU temperature reaches the threshold and return to 100% of its duty cycle
when temperature lowers to normal level. This function ensures the best
performance and reliability.
•
Fan Status Monitoring and Alarm: To prevent system overheat and system
damage, the CPU, MAIN, and PCI fans can be monitored for RPM and failure.
All the fans are set for its normal RPM range and alarm thresholds.
•
•
Temperature Monitoring andAlert:To prevent system overheat and system dam-
age, this motherboard supports processor thermal sensing and auto-protection.
Voltage Monitoring and Alert: System voltage levels are monitored to ensure
stable current to critical motherboard components. Voltage specifications are
more critical for future processors, so monitoring is necessary to ensure proper
system configuration and management.
•
System Resources Alert: Today’s operating systems, such as Windows 98/
Millenium, and Windows NT/2000, require much more memory and hard drive
space to present enormous user interfaces and run large applications. The onboard
hardware ASUS ASIC in conjunction with either the bundled ASUS PC Probe
or Intel LDCM will warn the user before the system resources are used up to
prevent possible application crashes. Suggestions will give the user information
on managing their limited resources more efficiently.
•
•
Dual Function Power Button: Through BIOS, the power button can be defined
as the “Stand by” (ie.: Suspend or Sleep) button or as the Soft-Off (see ATX
Power / Soft-Off Switch Lead in 3.8 Connectors for more information) button.
Regardless of the setting, pushing the power button for more than 4 seconds will
enter the Soft-Off mode.
Peripheral Power Up: Keyboard or Mouse power up can be enabled or dis-
abled through BIOS setup to allow the computer to be powered ON using your
keyboard or mouse click.
ASUS P4T-F User’s Manual
11
2. FEATURES
2.2 P4T-F Motherboard Components
See opposite page for locations.
Location
Processor Support Socket 423 for Pentium 4 Processors ....................................... 2
Chipsets Intel 850 Memory Controller Hub (MCH) ............................... 4
Intel I/O Controller Hub 2 (ICH2) ......................................... 11
2Mbit Firmware Hub (FWH) ................................................. 13
Low Pin Count (LPC) Super Multi-I/O Chipset .................... 16
Main Memory Maximum 1GB support
4 RIMM Sockets ...................................................................... 5
Dual Channel PC800/PC600 RDRAM support
Switches DSW Frequency Setting ........................................................... 9
Expansion Slots 5 PCI Slots .............................................................................. 17
1 Accelerated Graphics Port (AGP Pro) Slot.......................... 20
Communictions Network Riser (CNR) .................................. 15
System I/O 2 IDE Connectors (UltraDMA33/66/100 support) ................... 7
1 Floppy Disk Drive Connector ............................................... 8
1 USB Header (supports 2 USB ports) ................................... 12
1 Parallel Port Connector ............................................. (Top) 24
1 Serial COM1 Port Connector .............................. (Bottom) 25
1 Serial COM2 Port Connector .............................. (Bottom) 23
2 USB Port Connectors ......................................................... 26
1 PS/2 Mouse Connector .............................................. (Top) 27
1 PS/2 Keyboard Connector ................................... (Bottom) 27
Audio Headphone Connector ............................................................ 18
AC’97 Audio CODEC ............................................................ 19
Microphone 2 Connector ........................................................ 21
1 Game/MIDI Connector.............................................. (Top) 22
1 Line Out Connector ............................................. (Bottom) 22
1 Line In Connector ................................................ (Bottom) 22
1 Line Microphone Connector ............................... (Bottom) 22
Hardware Monitoring ASUS onboard chipset ........................................................... 10
Power ATX Power Supply Connector ................................................. 1
ATX 12V Power Supply Connector ......................................... 3
Special Feature Auxillary Power Connector ...................................................... 6
Onboard LED ......................................................................... 14
Form Factor ATX
ASUS P4T-F User’s Manual
12
2. FEATURES
2.2.1 Component Locations
1 2
3
4
5
6 7
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12 11 10 9 8
ASUS P4T-F User’s Manual
13
3. HARDWARE SETUP
3.1 P4T-F Motherboard Layout
24.4cm (9.60in)
PS/2KBMS
T: Mouse
B: Keyboard
ATX Power Connector
USBPWR
USB
T: Port1
RIMMB2 (16/18 bit, 184-pin module)
RIMMB1 (16/18 bit, 184-pin module)
B: Port
2
COM1
MAIN_FAN
Socket 423
Intel 850
Memory
COM2
Controller
Hub (MCH)
Line
Out
Line
In
MODEM
Mic
In
CPU_FAN
AUX
CD1
ATX12V
FLOPPY
MIC2
Accelerated Graphics Port (AGP Pro)
Audio
Intel I/O
Controller
Hub
Codec
PCI1
PCI2
(ICH2)
CLRTC
HEADPHONE
CR2032 3V
Lithium Cell
CMOS Power
HDDLED
PCI3
P4T-F
PCI4
2Mbit
Firmware
Hub
ASUS
ASIC
with
Hardware
Monitor
PCI_FAN
Super
I/O
JEN
J3-
J3+
LED
PCI5
DIP
Switches
USB2
IR
ADN
OC3
CNR_SLOT
PANEL
CHASSIS
Grayed components are available only on certain models at the time of purchase.
ASUS P4T-F User’s Manual
14
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN
p. 18 JumperFree™ Mode (JEN) (Disable / Enable)
p. 19 CPU Ext. Freq. Selection (SW1 Switches 1–5)
p. 20 Manual CPU Ratio Settings (SW1 Switches 7-10)
p. 21 USB Device Wake-up (USBPWR)
2) SW1 (Switches 6-10)
3) SW1 (Switches 1-4)
4) USBPWR
5) ADN
6) J3-J3-/OC3
p. 22 Onboard Audio Codec (Enable/Disable)
p. 22 USB2 / CNRUSB Selection
Memory, CPU and Expansion
1) RIMMA1/A2/B1/B2
2) CPU
p.23 184-Pin System Memory Support
p.25 Central Processing Unit (CPU)
3) Heatsink
4) PCI1/2/3/4/5
5) AGP Pro
p.26 CPU Heatsink Retention Module Installation
p.29 32-bit PCI Bus Expansion Slots
p.31 Accelerated Graphics Port (AGP Pro) Slot
p.31 Communications and Networking Riser (CNR) Slot
6) CNR
Connectors
1) PS2KBMS
p.32 PS/2 Mouse Connector (6 pin female)
2) PS2KBMS
3) PRINTER
4) COM1, COM2
p.32 PS/2 Keyboard Connector (6 pin female)
p.33 Parallel Port Connector (25 pin female)
p.33 Serial Port Connector (Two 9 pin male)
5) USB
p.33 Universal Serial Bus Ports (Two 4 pin female)
p.34 Joystick/MIDI Connector (15 pin female) (optional)
p.34 Audio Port Connectors (Three 1/8” female)(optional)
p.34 Floppy Disk Drive Connector (34-1pin)
6) GAME_AUDIO
7) LINE-IN, -OUT, MIC
8) FLOPPY
9) PRIMARY/SECONDARYIDE p.35 Primary/Secondary IDE Connectors (Two 40-1 pin)
10) MAIN_FAN, CPU_FAN
PCI_FAN
p.36 Fan Connectors (Three 3 pin)
11) USB2
p.37 USB Header (10-1 pin)
12) MODEM, CD_IN, AUX
13) MIC2
14) HEADPHONE
15) IR
p.37 Internal Audio Connectors (Three 4 pin) (optional)
p.38 Internal Microphone Connector (3 pin) (optional)
p.38 Headphone Connector (3 pin) (optional)
p.39 Standard Infrared (SIR) Module Connector (5 pin)
p.39 IDE Activity LED (2 pin)
16) HDLED
17) ATXPWR, ATX12V, (AUXPWR) p.40 Power Supply Connector (20 pin, 4 pin) (6 pin)
18) PWRLED (PANEL)
19) KEYLOCK (PANEL)
20) SPEAKER (PANEL)
21) MSG.LED (PANEL)
22) SMI (PANEL)
p.41 System Power LED Lead (3-1 pin)
p.41 Keyboard Lock Switch Lead (2 pin)
p.41 System Warning Speaker Connector (4 pin)
p.41 System Message LED (2 pin)
p.41 System Management Interrupt Switch Lead (2 pin)
p.41 ATX Power / Soft-Off Switch Lead (2 pin)
p.41 Reset Switch Lead (2 pin)
23) PWRSW (PANEL)
24) RESET (PANEL)
ASUS P4T-F User’s Manual
15
3. HARDWARE SETUP
3.3 Hardware Setup Procedure
IMPORTANT: Due to Pentium 4 CPU’s power consumption requirement, an
ATX12V power supply is recommended for this motherboard. For typical system
configurations, an ATX12V power supply that can supply at least 230W and at least
8.5A on the +12V lead is required. For heavily-loaded configurations, an ATX12V
power supply that can supply at least 300W is required.
Complete the following steps before using your computer:
1. Check motherboard settings
2. Install memory modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect ribbon cables, panel wires, and power supply cables
6. Configure the BIOS parameter settings
WARNING! Make sure that you unplug your power supply when adding or
removing system components. Failure to do so may cause severe damage to
your motherboard, peripherals, and/or components.
16
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
3.4 Motherboard Settings
This section tells you how to change motherboard function settings through the
switches and/or jumpers.
WARNING! Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a metal
object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or con-
nectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with the
component whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or
remove the ATX power connector on the motherboard.
P4T-F
ON
OFF
Standby
Power
Powered
Off
P4T-F Onboard LED
ASUS P4T-F User’s Manual
17
3. HARDWARE SETUP
Motherboard Frequency Settings (SW1 Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The illustration below shows all the switches in the
OFF position.
ON
OFF
SW1
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Reserved
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
P4T-F
P4T-F DIP Switches
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS setup
(see 4.4 Advanced Menu).
Setting
Enable (JumperFree)
JEN
[2-3] (default)
Disable (Jumper Mode) [1-2]
OFF
JEN
SW1
P4T-F
1 2
2 3
Jumper Mode
Jumper Free
(Default)
P4T-F JumperFree™ Mode Setting
18
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
2) CPU External Frequency Selection (SW1 Switches 6-10)
This option tells the clock generator what frequency to send to the CPU, DRAM,
and the PCI bus. This allows the selection of the CPU’s External frequency (or
BUS Clock). The BUS Clock multiplied by the Frequency Multiple equals the
CPU’s Internal frequency (the advertised CPU speed).
SW1
P4T-F
CPU
AGP
PCI
100.0MHz 103.0MHz 105.0MHz 110.0MHz
66.0MHz 68.0MHz 70.0MHz 73.0MHz
33.0MHz 34.0MHz 35.0MHz 36.0MHz
P4T-F CPU
External Frequency Selection
WARNING! Set the CPU frequency only to the recommended settings.
Frequencies other than the recommended CPU bus frequencies are not guaranteed
to be stable. Overclocking the processor is not recommended. It may result in a
slower speed.
ASUS P4T-F User’s Manual
19
3. HARDWARE SETUP
3) Manual CPU Ratio Settings (SW1 Switches 1-4)
Set SW1 switches (7-10) to use the clock multiplier to coordinate the ratio of
bus speeds with CPU settings. Set the DSW switches according to the internal
speed of your processor and the bus frequency.
IMPORTANT:
1. To use this feature, JEN must be set to Jumper Mode, [1-2].
(See 1, JumperFree™ Mode (JEN) in 3, HARDWARE SETUP.)
2. When JumperFree mode is enabled, use BIOS setup in place of these switches.
(Set Operating Frequency Setting to User Define under 4.4Advanced Menu
in BIOS Setup so you can set the CPU Frequency.)
SW1
P4T-F CPU External
Clock (BUS) Frequency
Selection
P4T-F
ON
ON
ON
ON
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
8.0x
13.0x
17.0x
21.0x
ON
ON
ON
ON
1
2
4
5
6
1
2
4
5
6
1
2
4
5
6
1
2
4
5
6
10.0x
14.0x
18.0x
22.0x
ON
ON
ON
ON
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
1
2
3
3
4
5
6
7
7
8
8
9 10
9 10
11.0x
15.0x
19.0x
23.0x
ON
ON
ON
ON
1
2
4
5
6
1
2
4
5
6
1
2
4
5
6
1
2
4
5
6
12.0x
16.0x
20.0x
24.0x
Multiplier
8.0x
1
2
3
4
[OFF]
[ON]
[OFF]
[OFF]
[ON]
[ON]
[OFF]
[OFF]
[OFF]
[OFF]
[ON]
[ON]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[ON]
[ON]
10.0x
11.0x
12.0x
13.0x
14.0x
15.0x
16.0x
17.0x
18.0x
19.0x
20.0x
21.0x
22.0x
23.0x
24.0x
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[OFF]
[ON]
[ON]
[OFF]
[OFF]
[ON]
[ON]
[OFF]
[OFF]
[ON]
[ON]
[ON]
[ON]
[OFF]
[OFF]
[OFF]
[OFF]
[ON]
[ON]
[ON]
[ON]
[ON]
[ON]
[ON]
[ON]
[ON]
[ON]
20
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
4) USB Device Wake-up (USBPWR)
Set these jumpers to +5V to allow wake up from the S1 sleep state (CPU stopped;
RAM refreshed; system running in low power mode) using the connected USB
devices. Set to +5VSB to allow wake up from S3 sleep state (no power to CPU;
RAM in slow refresh; power supply in reduced power mode). The default set-
ting for the three jumpers is 1-2 to select +5V (because not all computers have
the appropriate power supply).
NOTES:
1. This feature requires an ATX power supply that can supply at least 2A on
the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the
system does not power up.
2. The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal working conditions or in sleep mode.
USBPWR
3
2
2
1
+5V
+5VSB
P4T-F
P4T-F USB Device Wake Up
ASUS P4T-F User’s Manual
21
3. HARDWARE SETUP
5) Onboard Audio Setting (ADN) (audio models only)
The onboard Audio Codec may be enabled or disabled using these jumpers.
Disable the onboard Audio Codec if using a PCI audio card on any of the
expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot
later in this section).
Setting
Enable
Disable
ADN
[1-2] (default)
[2-3]
ADN
3
2
2
1
P4T-F
ENABLE AUDIO
DISABLE AUDIO
P4T-F AUDIO Setting
6) USB2 / CNRUSB Selection (J3-J3-/OC3)
The CNR slot can support an optional USB hub CNR card. Three jumpers are
used to control selection of USB or CNR functions: J3-, J3+ and OC3. The
factory default setting is for standard USB2 control. If a USB hub CNR card is
used, reset these jumpers to CNRUSB setting shown below.
IMPORTANT!Always set all three jumpers accordingly when selecting a device.
1 2
2
1
J3-
J3+
OC3
OC3
USB2
3
2
2 3
J3-
J3+
P4T-F
CNRUSB
A7V266 CNR/USB Selection
22
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
3.5 System Memory
NOTE: No hardware or BIOS setup is required after adding or removing memory.
This motherboard has four 184-pin Rambus Inline Memory Modules (RIMM) sockets.
These sockets support 64Mbit, 128Mbit, and 256Mbit Direct RDRAM technologies.
Location
Memory Module
Subtotal
RIMMA1
(Rows 0&1)
RDRAM
x 1
x 1
x 1
x 1
=
C-RIMM (use when socket will not be populated)
RIMMA2
(Rows 2&3)
RDRAM
C-RIMM (use when socket will not be populated)
RIMMB1
(Rows 4&5)
RDRAM
C-RIMM (use when socket will not be populated)
RIMMB2
(Rows 6&7)
RDRAM
C-RIMM (use when socket will not be populated)
TOTAL SYSTEM MEMORY
(2GB Max)
IMPORTANT
1. The memory configuration of channel A (RIMMA1 and RIMMA2) and
channel B (RIMMB1 and RIMMB2) must be identical (see below).
2. C-RIMMs (Continuity RIMM) must be used to complete the sockets that
are not populated by RDRAMs. A C-RIMM is necessary to avoid breaking
the signal lines, which are a serial connection in a Rambus interface, such
as used in this motherboard. This assures the electrical integrity of a Rambus
interface.
3. When C-RIMMs are required, it is recommended that they be inserted into
RIMMA2 and RIMMB2.
a.
b.
c.
C-RIMM
128MB RDRAM
RIMMB2
RIMMB1
NOTE: When using only two memory
modules, it is recommended that you
use configuration a.
RIMMA2
RIMMA1
C-RIMM
128MB RDRAM
128MB RDRAM
C-RIMM
RIMMB2
RIMMB1
128MB RDRAM
C-RIMM
RIMMA2
RIMMA1
RIMMB2
RIMMB1
128MB RDRAM
128MB RDRAM
RIMMA2
RIMMA1
128MB RDRAM
128MB RDRAM
ASUS P4T-F User’s Manual
23
3. HARDWARE SETUP
3.5.1 Installing Memory
The memory module (RIMM) will fit in only one orientation.
IMPORTANT: Do not touch the memory module’s connectors. Handle the mod-
ule only by the edges.
RIMM Sockets
RIMM with Heat Spreader
P4T-F
P4T-F 184-Pin RIMM Sockets
C-RIMM
1. Make sure that the notch keys in the module are aligned with the small ribs
inside the RIMM sockets.
MOUNTING NOTCH
RDRAM (with heat spreader)
NOTCH KEYS
CONNECTORS
(TOP VIEW)
RIBS (inside socket)
EJECTOR
2. With the ejectors in the open position (as shown), push down gently but firmly
on the memory module until it snaps into place. The guides on the socket’s
ejectors should go through the two mounting notches on the module and the
ejectors should close. If necessary, push the ejectors inward to secure the mod-
ule in place.
Removing Memory
To release a memory module, push both ejectors outward and pull the module straight
up and out of the RIMM sockets.
WARNING! RIMM modules become extremely hot during operation. To re-
duce the risk of personal injury from hot surfaces, allow the modules to cool off
before removing them.
24
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
3.6 Central Processing Unit (CPU)
The motherboard provides a ZIF Socket for the P4 Socket 423 CPU. The CPU that
came with the motherboard should have a fan attached to it to prevent overheating.
If not, then purchase a fan before turning on the system.
Socket 423 Pentium 4
P4T-F
Gold Arrow
P4T-F Socket 423
3.6.1 CPU Installation
1. Locate the P4 Socket 423 and
open it by pulling the lever gently
sideways away from the socket.
Then lift the lever upwards. The
socket lever must be fully opened
(90 to 100 degrees).
2. Insert the CPU with the correct
orientation. The gold arrow
of the CPU must be oriented
toward the outer corner of the
socket base nearest to the tip of
the lever handle.
3. Once completely inserted, press the CPU firmly and close the socket
lever until it snaps into its locked position.
CAUTION! The CPU fits in one orientation and should drop easily into
place. Do not force the CPU into the socket to avoid bending the pins. If
the CPU does not fit, check its alignment and look for bent pins.
ASUS P4T-F User’s Manual
25
3. HARDWARE SETUP
3.6.2 CPU Heatsink Retention Module Installation
Parts Inventory:
1. Two black plastic heatsink support braces have built-in retaining clips,
below left. An alternate heatsink support brace with two separate
retaining clips may be included with this package, below right. Both
types of supports may be affixed to the motherboard using the plastic
plugs and shown in #2 below.
Built-in retaining clips
Separate retaining clips
2. Four black plastic collars and
four white plastic plugs.
ASUS P4T-F User’s Manual
26
3. HARDWARE SETUP
Step 1: Mount the Black Plastic Heatsink Support Braces:
1. Insert the four black plastic collars from
the top through to the bottom of the
motherboard. Insert the white plastic
plugs into the middle of the black
plastic collars and pop them firmly out
the bottom of the motherboard. This
instruction applies to both types of
heatsink support clips in steps 2a and 2b.
Step 2a: Mount Heatsink Using Built-in Retaining Clips:
1. Open the retaining clips. Place the
heatsink on the CPU. The heatsink
should entirely cover the CPU. The
plastic heatsink support braces have
built-in retaining clips, right. Close and
snap the clips into the locked position.
With the added weight of the CPU fan
and heatsink locking brace, no extra
force is required to keep the CPU in
place.
2. Connect the CPU fan cable to the fan connector. (See 3.1 Motherboard
Layout / 3.8 Connectors).
CAUTION! Take care not to scrape the motherboard surface when
mounting a clamp-style processor fan, or else damage may occur. When
mounting a heatsink onto your CPU, make sure that exposed CPU
capacitors do not touch the heatsink, or else damage may occur! Refer
to heatsink/CPU documentation.
WARNING! Be sure that there is sufficient air circulation across the
processor’s heatsink by regularly checking that your CPU fan is working.
Without sufficient circulation, the processor could overheat and damage
both the processor and the motherboard. You may install an auxiliary
fan, if necessary.
ASUS P4T-F User’s Manual
27
3. HARDWARE SETUP
Step 2b: Mount Heatsink Using Separate Retaining Clips
1. Latch the large middle clip on
the metal heatsink retainer to the
central black tab on the plastic
heatsink support base.
2. Then latch the slotted metal tab
on the heatsink retaining clip to
the protruding black tab on the
end of the plastic heatsink
support base.
3. Push down on the levered end of
the heatsink retaining clip until
it locks into place.
4. Connect the CPU fan cable to the fan connector. (See 3.1 Motherboard
Layout / 3.8 Connectors).
ASUS P4T-F User’s Manual
28
3. HARDWARE SETUP
3.7 Expansion Cards
In the future, you may need to install expansion cards. The motherboard has five
PCI expansion slots to support these cards. Follow the steps in the next section
when installing expansion cards.
WARNING! Unplug the system power cord when adding or removing expansion
cards or other system components. Failure to do so may cause severe damage to
both the motherboard and expansion cards.
3.7.1 Installing an Expansion Card
1. Read the documentation that comes with the expansion card and make any
necessary hardware settings for the card before installing it.
2. Remove the system unit cover and the bracket plate on the slot you intend to use.
Keep the screw for later use.
3. Align the card connectors with the slot and press firmly until the card fits in
place.
4. Secure the card to the slot with the screw you removed earlier.
5. Replace the system cover.
6. Change the necessary BIOS settings, if any.
(see section 4.4.3 PCI Configuration to change the settings.)
7. Install the necessary software drivers for the expansion card.
ASUS P4T-F User’s Manual
29
3. HARDWARE SETUP
3.7.2 Assigning IRQs for Expansion Cards
Some expansion cards need an IRQ to operate. Generally, an IRQ must be exclusively
assigned to one use. In a standard design, there are 16 IRQs available but most of
them are already in use, leaving 6 IRQs free for expansion cards. If your motherboard
has PCI audio onboard, an additional IRQ will be used. If your motherboard also
has MIDI enabled, another IRQ will be used, leaving 4 IRQs free.
Standard Interrupt Assignments
IRQ
0
Priority
Standard Function
System Timer
1
1
2
Keyboard Controller
2
N/A
11
12
13
14
15
3
4
5
6
7
Programmable Interrupt
Communications Port (COM2)
Communications Port (COM1)
Sound Card (sometimes LPT2)
Floppy Disk Controller
Printer Port (LPT1)
System CMOS/Real Time Clock
ACPI Mode when enabled
IRQ Holder for PCI Steering
IRQ Holder for PCI Steering
PS/2 Compatible Mouse Port
Numeric Data Processor
Primary IDE Channel
3*
4*
5*
6
7*
8
9*
10*
11*
12*
13
14*
15*
8
9
10
Secondary IDE Channel
*These IRQs are usually available for ISA or PCI devices.
Interrupt Request Table for this Motherboard
INT-A INT-B INT-C INT-D INT-E INT-F INT-G INT-H
PCI slot 1
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5
AGP slot
USB HC0
USB HC1
SMB
—
—
—
—
—
used
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
used
—
—
—
—
—
—
shared
—
—
—
—
—
—
—
—
used
—
—
—
—
—
—
—
—
—
—
shared
—
—
—
—
shared
—
—
shared —
—
—
—
—
used
—
—
—
shared —
shared —
—
—
AC’97
IMPORTANT: If using PCI cards on shared slots, make sure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments. Conflicts will arise
between the two PCI groups that will make the system unstable or cards inoperable.
ASUS P4T-F User’s Manual
30
3. HARDWARE SETUP
3.7.3 Accelerated Graphics Port (AGP Pro)
This motherboard provides an accelerated graphics port (AGP Pro) to support a new
generation of AGP graphics cards with ultra-high memory bandwidth.
AGP Card without Retention Notch
P4T-F
TOP VIEW
20-pin bay
Rib (inside slot)
28-pin bay
Rib
P4T-F Accelerated Graphics Port (AGP PRO)
IMPORTANT: Only 1.5V AGP cards are supported. ASUS® AGP 4X cards are
rated for both 1.5 and 3.3 Volts. EarlyAGP cards only operate at 3.3 volts and will
not fit properly into the new AGP 4X slots. See examples of both types below:
An early 3.3V AGP card:
Do not use.
A new 1.5 / 3.3V AGP card:
OKAY to use.
3.7.4 Communications and Networking Riser (CNR)
This connector supports specially designed network, audio, or modem riser cards.
Main processing is done through software adn controlled by the motherboard’s
system chipset. This provides upgradeable network, audio, and/or modem solutions
at an incredibly low cost.
P4T-F
P4T-F Communication & Networking Riser Connectors
ASUS P4T-F User’s Manual
31
3. HARDWARE SETUP
3.8 External Connectors
WARNING! Some pins are used for connectors or power sources. These are
clearly distinguished from jumpers in the Motherboard Layout. Placing jumper
caps over these connector pins will cause damage to your motherboard.
IMPORTANT: Ribbon cables should always be connected with the red stripe to
Pin 1 on the connectors. Pin 1 is usually on the side closest to the power connec-
tor on hard drives and CD-ROM drives, but may be on the opposite side on
floppy disk drives. Check the connectors before installation because there may
be exceptions. IDE ribbon cables must be less than 46 cm (18 in.), with the
second drive connector no more than 15 cm (6 in.) from the first connector.
1) PS/2 Mouse Connector (Green 6-pin PS2KBMS)
The system will direct IRQ12 to the PS/2 mouse if one is detected. If one is not
detected, expansion cards can use IRQ12. See PS/2 Mouse Function Control
in 4.4 Advanced Menu.
PS/2 Mouse (6-pin Female)
2) PS/2 Keyboard Connector (Purple 6-pin PS2KBMS)
This connection is for a standard keyboard using an PS/2 plug (mini DIN). This
connector will not allow standard AT size (large DIN) keyboard plugs. You
may use a DIN to mini DIN adapter on standard AT keyboards.
PS/2 Keyboard (6-pin Female)
32
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
3) Parallel Port Connector (Burgundy 25-pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.
Parallel Port (25-pin Female)
4) Serial Port Connectors (Teal/Turquoise 9-pin COM1, 9-pin COM2)
Two serial ports are ready for a mouse or other serial devices. See Onboard
Serial Port 1/2 in 4.4.2 I/O Device Configuration for settings.
COM1
COM2
Serial Ports (9-pin Male)
5) Universal Serial Bus Ports (Black two 4 pin USB)
Two USB ports are available for connecting USB devices. For additional USB
ports, you can use the USB headers (see USB Headers later in this section).
NOTE: USB Function (see 4.4.3 PCI Configuration) must be Enabled to use
these ports.
USB 1
Universal Serial Bus (USB) 2
ASUS P4T-F User’s Manual
33
3. HARDWARE SETUP
6) Joystick/MIDI Connector (15 pin Female GAME_AUDIO)
You may connect game joysticks or game pades to this connector for playing
games. Connect MIDI devices for playing or editing audio.
Game/MIDI (15-pin Female)
7) Audio Port Connectors (Three 1/8” Female LINE IN, LINE OUT, MIC)
Line Out can be connected to headphones or preferably powered speakers.
Line In allows tape players or other audio sources to be recorded by your com-
puter or played through the Line Out. Mic allows microphones to be connected
for inputting voice.
Line Out Line In Mic
1/8" Stereo Audio Connectors
8) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting the cable into the wrong
orientation).
FLOPPY
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
P4T-F
P4T-F Floppy Disk Drive Connector
34
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
9) Primary (Blue) / Secondary IDE Connectors (Two 40-1pin IDE)
These connectors support the provided IDE hard disk ribbon cable. Connect the
cable’s blue connector to the motherboard’s primary (recommended) or second-
ary IDE connector. Then connect the gray connector to your UltraDMA/100
slave device (hard disk drive) and the black connector to your UltraDMA/100
master device. It is recommended that non-UltraDMA/100 devices be connected
to the secondary IDE connector. If you install two hard disks, you must config-
ure the second drive to Slave mode. Please refer to your hard disk documenta-
tion for the jumper settings. BIOS now supports specific device bootup (see 4.6
Boot Menu). (Pin 20 is removed to prevent wrong orientations).
TIP: You may configure two hard disks to be both Masters with two ribbon
cables – one for the primary IDE connector and another for the secondary IDE
connector. You may install one operating system on an IDE drive and another
on a SCSI drive and select the boot disk through 4.6 Boot Menu.
IMPORTANT: UltraDMA/100 IDE devices must use a 40-pin 80-conductor IDE
cable for 100MByte/sec transfer rates.
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
P4T-F
PIN 1
P4T-F IDE Connectors
PIN 1
ASUS P4T-F User’s Manual
35
3. HARDWARE SETUP
10) Fan Connectors (3 pin MAIN_FAN, CPU_FAN, PCI_FAN)
These connectors support cooling fans of 350mA (4.2 Watts) or less. Orientate
the fans so that the heat sink fins allow airflow to go across the onboard heat
sink(s) instead of the expansion slots. Depending on the fan manufacturer, the
wiring and plug may be different. The red wire should be positive, while the
black should be ground. Connect the fan’s plug to the board taking into consid-
eration the polarity of the connector.
NOTE: The “Rotation” signal is to be used only by a specially designed fan with
rotation signal. The Rotations per Minute (RPM) can monitored using a utility such
as ASUS PC Probe or Intel LDCM.
WARNING! The CPU and/or motherboard will overheat if there is no airflow
across the CPU and onboard heatsinks. Damage may occur to the motherboard
and/or the CPU fan if these pins are incorrectly used. These are not jumpers,
do not place jumper caps over these pins.
MAIN_FAN
GND
+12V
Rotation
GND
CPU_FAN
+12V
Rotation
P4T-F
Rotation
PCI_FAN
+12V
GND
P4T-F 12-Volt Cooling Fan Power
36
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
11) USB Headers (10-1 pin USB2)
If the USB Ports on the back panels are inadequate, a USB header is available
for two additional USB ports. Connect the 10-1 pin ribbon cable from the pro-
vided 2-port USB connector set to the midboard 10-1 pin USB header and mount
the USB connector set to an open slot on your chassis.
1: USB Power 6: USB Power
1
6
5
2: USBP2–
3: USBP2+
4: GND
7: USBP3–
8: USBP3+
9: GND
10
5: NC
USB2
P4T-F
P4T-F USB Headers
12) Internal Audio Connectors (4-pin MODEM, CD_IN, AUX)
These connectors allow you to receive stereo audio input from such audio-vi-
sual sources as a VIDEO or CD-ROM input, or MPEG card.
MODEM
Modem-Out
Ground
Ground
Modem-In
VIDEO (Green)
AUX (White)
CD1 (Black)
Left Audio Channel
P4T-F
Ground
Ground
Right Audio Channel
P4T-F Internal Audio Connectors
ASUS P4T-F User’s Manual
37
3. HARDWARE SETUP
13) Internal Microphone Connector (3 pin MIC2) (optional)
Microphone audio may be directly input through this connector.
MIC2
MIC Input
1
MIC Power
Ground
P4T-F
P4T-F Internal Microphone Connector
14) Headphone (3 pin HEADPHONE) (optional)
An external headphone feeds from the motherboard using this connector.
HEADPHONE
Headphone Left
1
Headphone Right
P4T-F
GND
P4T-F True-Level Line Out Header
38
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
15) Standard and Consumer Infrared (SIR) Module Connector (5-pin IR)
This connector supports an optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support
this feature. You must also configure the setting through UART2 Use Infrared
(see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for
use with COM2 or IrDA. Use the five pins as shown in Back View and connect
a ribbon cable from the module to the motherboard’s SIR connector according
to the pin definitions.
Front View
Back View
IR
1
+5V
(NC)
IRTX
GND
P4T-F
IRRX
P4T-F Infrared Module Connector
16) IDE Activity LED (2-pin HDLED)
This connector supplies power to the cabinet’s IDE activity LED. Read and
write activity by devices connected to the Primary/Secondary IDE and Primary/
Secondary ATA100 connectors will cause the LED to light up.
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
HDDLED
P4T-F
P4T-F HDD Activity LED
ASUS P4T-F User’s Manual
39
3. HARDWARE SETUP
17) Power Supply Connectors (20-pin block ATXPWR) (4-pin ATX12V) (6
pin block AUXPWR (optional)
These connectors supply ATX 12V power. Each power supply plug inserts in
one orientation only. Push down firmly and make sure the pins are aligned.
IMPORTANT: For typical system configurations, an ATX12V power supply
that can supply at least 230W and at least 8.5A on the +12V lead is required. For
heavily-loaded configurations, anATX12V power supply that can supply at least
300W is required. Your system may become unstable/unreliable and may expe-
rience difficulty in powering up if your power supply is inadequate. For Wake-
On-LAN support, your ATX power supply (minimum recommended wattage:
230watts) must supply at least 720mA +5VSB.
AUXPWR
Pin 1
Key
Pin 1
+12.0VDC
+5VSB
PWR_OK
COM
+5.0VDC
+5.0VDC
-5.0VDC
COM
ATXPWR
+5.0VDC
COM
+5.0VDC
COM
+3.3VDC
+3.3VDC
COM
COM
PS_ON#
COM
-12.0VDC
+3.3VDC
ATX12V
P4T-F
Pin 1
COM
+12V DC
COM
+12V DC
P4T-F ATX &
Auxiliary Power Connectors
40
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
The following diagram is for items 20–26:
Speaker
Connector
Keyboard Lock
Power LED
Reset SW
Message LED
SMI Lead
P4T-F
ATX Power
Switch*
*
Requires an ATX power supply.
P4T-F System Panel Connectors
20) System Power LED Lead (3-1 pin PWRLED)
This 3-1 pin connector connects the system power LED, which lights when the
system is powered on and blinks when it is in sleep mode.
21) Keyboard Lock Switch Lead (2-pin KEYLOCK)
This 2-pin connector connects to the case-mounted key switch to allow key-
board locking.
22) System Warning Speaker Connector (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker. Two sources
(LINE_OUT and SPEAKER) will allow you to hear system beeps and warn-
ings. Only SPEAKER will allow you to hear system beeps before the integrated
audio has been properly initialized.
23) System Message LED Lead (2-pin MSG.LED)
This indicates whether a message has been received from a fax/modem. The
LED will remain lit when there is no signal and blink when there is data re-
ceived. This function requires an ACPI OS and driver support.
24) System Management Interrupt Lead (2-pin SMI)
This allows the user to manually place the system into a suspend mode or “Green”
mode, where system activity is decreased to save electricity and expand the life
of certain components when the system is not in use. This 2-pin connector con-
nects to the case-mounted suspend switch.
25) ATX Power Switch Lead (2-pin PWRSW)
The system power is controlled by a momentary switch connected to this lead.
Pressing the button once will switch the system between ON and SOFT OFF.
Pushing the switch while in the ON mode for more than 4 seconds will turn the
system off. The system power LED shows the status of the system’s power.
26) Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a preferred
method of rebooting to prolong the life of the system’s power supply.
ASUS P4T-F User’s Manual
41
3. HARDWARE SETUP
(This page was intentionally left blank.)
42
ASUS P4T-F User’s Manual
3. HARDWARE SETUP
3.9 Starting Up the First Time
1. After all connections are made, close the system case cover.
2. Be sure that all switches are off (in some systems, marked with ), and
the power input voltage is set to comply with the standard used in your
country (220V-240V or 110-120V).
3. Connect the power supply cord into the power supply located on the
back of your system case according to your system user’s manual.
4. Connect the power cord into a power outlet that is equipped with a surge
protector.
5. You may then turn on your devices in the following order:
a. Your monitor
b. External SCSI devices (starting with the last device on the chain)
c. Your system power. For ATX power supplies, you need to switch on
the power supply as well as press the ATX power switch on the front
of the case.
6. The power LED on the front panel of the system case will light. For
ATX power supplies, the system LED will light when the ATX power
switch is pressed. The LED on the monitor may light up or switch be-
tween orange and green after the system’s if it complies with “green”
standards or if it has a power standby feature. The system will then run
power-on tests. While the tests are running, the BIOS will alarm beeps
or additional messages will appear on the screen. If you do not see
anything within 30 seconds from the time you turn on the power, the
system may have failed a power-on test. Recheck your jumper settings
and connections or call your retailer for assistance.
Award BIOS Beep Codes
Beep
Meaning
One short beep when
displaying logo
No error during POST
Long beeps in an endless loop No DRAM installed or detected
One long beep followed by
three short beeps
Video card not found or video card
memory bad
High frequency beeps when
system is working
CPU overheated
System running at a lower frequency
ASUS P4T-F User’s Manual
43
3. HARDWARE SETUP
7. During power-on, hold down <Delete> to enter BIOS setup. Follow the
instructions in 4. BIOS SETUP.
* Powering Off your computer: You must first exit or shut down your
operating system before switching off the power switch. ForATX power
supplies, you can press the ATX power switch after exiting or shutting
down your operating system. If you use Windows 9X, click the Start
button, click Shut Down, and then click Shut down the computer?
The power supply should turn off after Windows shuts down.
NOTE: The message “You can now safely turn off your computer”
will not appear when shutting down with ATX power supplies.
44
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.1 Managing and Updating Your BIOS
4.1.1 Upon First Use of the Computer System
It is recommended that you save a copy of the original motherboard BIOS
along with a Flash Memory Writer utility (AFLASH.EXE) to a bootable
floppy disk in case you need to reinstall the BIOS later. AFLASH.EXE is a
Flash Memory Writer utility that updates the BIOS by uploading a new BIOS
file to the programmable flash ROM on the motherboard. This file works
only in DOS mode. To determine the BIOS version of your motherboard,
check the last four numbers of the code displayed on the upper left-hand
corner of your screen during bootup. Larger numbers represent a newer BIOS
file.
1. Type FORMAT A:/S at the DOS prompt to create a bootable system
floppy disk. DO NOT copy AUTOEXEC.BAT & CONFIG.SYS to the
disk.
2. Type COPYD:\AFLASH\AFLASH.EXEA:\ (assuming D is your CD-
ROM drive) to copy AFLASH.EXE to the just created boot disk.
NOTE: AFLASH works only in DOS mode. It will not work with DOS
prompt in Windows and will not work with certain memory drivers that
may be loaded when you boot from your hard drive. It is recommended
that you reboot using a floppy.
3. Reboot your computer from the floppy disk. NOTE: BIOS setup must
specify “Floppy” as the first item in the boot sequence.
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH.
IMPORTANT! If “unknown” is displayed after Flash Memory:, the memory
chip is either not programmable or is not supported by the ACPI BIOS and
therefore, cannot be programmed by the Flash Memory Writer utility.
ASUS A7A266 User’s Manual
45
4. BIOS SETUP
5. Select 1. Save Current BIOS to File from the Main menu and press
<Enter>. The Save Current BIOS To File screen appears.
6. Type a filename and the path, for example, A:\XXX-XX.XXX and then
press <Enter>.
4.1.2 Updating BIOS Procedures
WARNING! Only update your BIOS if you have problems with your mother-
board and you know that the new BIOS revision will solve your problems.
Careless updating can result in your motherboard having more problems!
1. Download an updated ASUS BIOS file from the Internet (WWW or
FTP) (see ASUS CONTACT INFORMATION on page 3 for details)
and save to the disk you created earlier.
2. Boot from the disk you created earlier.
3. At the “A:\” prompt, type AFLASH and then press <Enter>.
4. At the Main Menu, type 2 and then press <Enter>. The Update BIOS
Including Boot Block and ESCD screen appears.
5. Type the filename of your new BIOS and the path, for example, A:\XXX-
XX.XXX, and then press <Enter>.
NOTE: To cancel this operation, press <Enter>.
46
ASUS P4T-F User’s Manual
4. BIOS SETUP
6. When prompted to confirm the BIOS update, press Y to start the up-
date.
7. The utility starts to program the new BIOS information into the flash
ROM. The boot block will be updated automatically only when neces-
sary. This will minimize the chance that a failed update will prevent
your system from booting up. When the programming is finished,
Flashed Successfully will be displayed.
NOTE: When you see the message “Boot Block is different”, you
may still press <Y> to update the BIOS. Yet if the update fails, your
system will run a greater risk of boot failure depending on whether
the boot block is damaged or not.
ASUS P4T-F User’s Manual
47
4. BIOS SETUP
8. Follow the onscreen instructions to continue.
WARNING! If you encounter problems while updating the new BIOS,
DO NOT turn off your system since this might prevent your system
from booting up. Just repeat the process, and if the problem still per-
sists, update the original BIOS file you saved to disk above. If the Flash
Memory Writer utility was not able to successfully update a complete
BIOS file, your system may not be able to boot up. If this happens, your
system will need servicing.
48
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.2 BIOS Setup Program
This motherboard supports a programmable EEPROM that can be updated using
the provided utility as described in 4.1 Managing and Updating Your BIOS.
The utility is used if you are installing a motherboard, reconfiguring your system,
or prompted to “Run Setup”. This section describes how to configure your system
using this utility.
Even if you are not prompted to use the Setup program, at some time in the future
you may want to change the configuration of your computer. For example, you
may want to enable the Security Password Feature or make changes to the power
management settings. It will then be necessary to reconfigure your system using
the BIOS Setup program so that the computer can recognize these changes and
record them in the CMOS RAM of the EEPROM.
The EEPROM on the motherboard stores the Setup utility. When you start up the
computer, the system provides you with the opportunity to run this program. This
appears during the Power-On Self Test (POST). Press <Delete> to call up the Setup
utility. If you are a little bit late in pressing the mentioned key, POST will continue
with its test routines, thus preventing you from calling up Setup. If you still need to
call Setup, restart the system by pressing <Ctrl> + <Alt> + <Delete>, or by press-
ing the Reset button on the system chassis. You can also restart by turning the
system off and then back on again. But do so only if the first two methods fail.
The Setup program has been designed to make it as easy to use as possible. It is a
menu-driven program, which means you can scroll through the various sub-menus
and make your selections among the predetermined choices.
To access the BIOS Setup program, press the <Delete> key after
the computer has run through its POST.
NOTE: Because the BIOS software is constantly being updated, the following
BIOS screens and descriptions are for reference purposes only and may not re-
flect your BIOS screens exactly.
ASUS P4T-F User’s Manual
49
4. BIOS SETUP
4.2.1 BIOS Menu Bar
The top of the screen has a menu bar with the following selections:
MAIN Use this menu to make changes to the basic system configuration.
ADVANCED Use this menu to enable and make changes to the advanced
features.
POWER
BOOT
EXIT
Use this menu to configure and enable Power Management
features.
Use this menu to configure the default system device used to lo-
cate and load the Operating System.
Use this menu to exit the current menu or specify how to exit the
Setup program.
To access the menu bar items, press the right or left arrow key on the keyboard
until the desired item is highlighted.
4.2.2 Legend Bar
At the bottom of the Setup screen you will notice a legend bar. The keys in the
legend bar allow you to navigate through the various setup menus. The following
table lists the keys found in the legend bar with their corresponding alternates and
functions.
Navigation Key(s)
<F1> or <Alt + H>
Function Description
Displays the General Help screen from anywhere in the BIOS
Setup
<Esc>
Jumps to the Exit menu or returns to the main menu from a sub-
menu
← or → (keypad arrow) Selects the menu item to the left or right
↑ or ↓ (keypad arrow)
Moves the highlight up or down between fields
- (minus key)
Scrolls backward through the values for the highlighted field
+ (plus key) or spacebar Scrolls forward through the values for the highlighted field
<Enter>
Brings up a selection menu for the highlighted field
Moves the cursor to the first field
<Home> or <PgUp>
<End> or <PgDn>
Moves the cursor to the last field
<F5>
Resets the current screen to its Setup Defaults
Saves changes and exits Setup
<F10>
50
ASUS P4T-F User’s Manual
4. BIOS SETUP
General Help
In addition to the Item Specific Help window, the BIOS setup program also pro-
vides a General Help screen. This screen can be called up from any menu by sim-
ply pressing <F1> or the <Alt> + <H> combination. The General Help screen lists
the legend keys with their corresponding alternates and functions.
Saving Changes and Exiting the Setup Program
See 4.7 Exit Menu for detailed information on saving changes and exiting the
setup program.
Scroll Bar
When a scroll bar appears to the right of a help window, it indicates that there is
more information to be displayed that will not fit in the window. Use <PgUp> and
<PgDn> or the up and down arrow keys to scroll through the entire help docu-
ment. Press <Home> to display the first page, press <End> to go to the last page.
To exit the help window, press <Enter> or <Esc>.
Sub-Menu
Note that a right pointer symbol (as shown in the left view) appears to the left of
certain fields. This pointer indicates that a sub-menu can be
launched from this field. A sub-menu contains additional op-
tions for a field parameter. To call up a sub-menu, simply move
the highlight to the field and press <Enter>. The sub-menu
will then immediately appear. Use the legend keys to enter
values and move from field to field within a sub-menu just as
you would within a menu. Use the <Esc> key to return to the
main menu.
Take some time to familiarize yourself with each of the leg-
end keys and their corresponding functions. Practice navigating through the vari-
ous menus and sub-menus. If you accidentally make unwanted changes to any of
the fields, use the set default hot key <F5>. While moving around through the
Setup program, note that explanations appear in the Item Specific Help window
located to the right of each menu. This window displays the help text for the cur-
rently highlighted field.
NOTE: The item heading in square brackets represents the default setting for
that field.
ASUS P4T-F User’s Manual
51
4. BIOS SETUP
4.3 Main Menu
When the Setup program is accessed, the following screen appears:
System Time [XX:XX:XX]
Sets your system to the time that you specify (usually the current time).
The format is hour, minute, second. Valid values for hour, minute and sec-
ond are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). Use the
<Tab> or <Shift> + <Tab> keys to move between the hour, minute, and
second fields.
System Date [XX/XX/XXXX]
Sets your system to the date that you specify (usually the current date). The
format is month, day, year. Valid values for month, day, and year are Month:
(1 to 12), Day: (1 to 31), Year: (100 year range). Use the <Tab> or <Shift>
+ <Tab> keys to move between the month, day, and year fields.
Legacy Diskette A [1.44M, 3.5 in.], Legacy Diskette B [None]
Sets the type of floppy drives installed. Configuration options: [None]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
[2.88M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
This is required to support older Japanese floppy drives. Floppy 3 Mode
support will allow reading and writing of 1.2MB (as opposed to 1.44MB)
on a 3.5-inch diskette. Configuration options: [Disabled] [Drive A]
[Drive B] [Both]
52
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.3.1 Primary & Secondary Master/Slave
NOTE: Before attempting to configure a hard disk drive, make sure you
have the configuration information supplied by the manufacturer of the
drive. Incorrect settings may cause your system to not recognize the in-
stalled hard disk. To allow the BIOS to detect the drive type automati-
cally, select [Auto].
Type [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the correct values will be filled in for the remaining
fields on this sub-menu. If automatic detection fails, your hard disk drive
may be too old or too new. You can try updating your BIOS or enter the
IDE hard disk drive parameters manually.
NOTE: After the IDE hard disk drive information has been entered into
BIOS, new IDE hard disk drives must be partitioned (such as with FDISK)
and then formatted before data can be read from and write on. Primary
IDE hard disk drives must have its partition set to active (also possible
with FDISK).
Other options for the Type field are:
[None] - to disable IDE devices
ASUS P4T-F User’s Manual
53
4. BIOS SETUP
IMPORTANT: If your hard disk was already formatted on an older previous system,
incorrect parameters may be detected. You will need to enter the correct parameters
manually or use low-level format if you do not need the data stored on the hard disk.
If the parameters listed differ from the ones used when the disk was formatted, the
disk will not be readable. If the auto-detected parameters do not match the ones that
should be used for your disk, you should enter the correct ones manually by setting
[User Type HDD].
[User Type HDD]
Manually enter the number of cylinders, heads and sectors per track for
your drive. Refer to your drive documentation or look on the drive for this
information. If no drive is installed or if you are removing a drive and not
replacing it, select [None].
Translation Method [LBA]
Select the hard disk drive type in this field. When Logical Block Address-
ing is enabled, 28-bit addressing of the hard drive is used without regard
for cylinders, heads, or sectors. Note that LBA Mode is necessary for drives
with greater than 504MB in storage capacity. Configuration options: [LBA]
[LARGE] [Normal] [Match Partition Table] [Manual]
Cylinders
This field configures the number of cylinders. Refer to your drive docu-
mentation to determine the correct value to enter into this field. NOTE: To
make changes to this field, the Type field must be set to [User Type HDD]
and the Translation Method field must be set to [Manual].
54
ASUS P4T-F User’s Manual
4. BIOS SETUP
Head
This field configures the number of read/write heads. Refer to your drive
documentation to determine the correct value to enter into this field. NOTE:
To make changes to this field, the Type field must be set to [User Type
HDD] and the Translation Method field must be set to [Manual].
Sector
This field configures the number of sectors per track. Refer to your drive
documentation to determine the correct value to enter into this field. NOTE:
To make changes to this field, the Type field must be set to [User Type
HDD] and the Translation Method field must be set to [Manual].
CHS Capacity
This field shows the drive’s maximum CHS capacity calculated automati-
cally by the BIOS from the drive information you entered.
Maximum LBA Capacity
This field shows the drive’s maximum LBA capacity calculated automati-
cally by the BIOS from the drive information you entered.
Multi-Sector Transfers [Maximum]
This option automatically sets the number of sectors per block to the high-
est number supported by the drive. This field can also be configured manu-
ally. Note that when this field is automatically configured, the set value
may not always be the fastest value for the drive. Refer to the documenta-
tion that came with your hard drive to determine the optimal value and set
it manually. NOTE: To make changes to this field, the Type field must be
set to [User Type HDD]. Configuration options: [Disabled] [2 Sectors] [4
Sectors] [8 Sectors] [16 Sectors] [32 Sectors] [Maximum]
SMART Monitoring [Disabled]
This allows the enabling or disabling of the S.M.A.R.T. (Self-Monitoring,
Analysis and Reporting Technology) system which utilizes internal hard
disk drive monitoring technology. This feature is normally disabled be-
cause system resources used in this feature may decrease system perfor-
mance. Configuration options: [Disabled] [Enabled]
PIO Mode [4]
This option lets you set a PIO (Programmed Input/Output) mode for the
IDE device. Modes 0 through 4 provide successively increased performance.
Configuration options: [0] [1] [2] [3] [4]
Ultra DMA Mode [Disabled]
Ultra DMA capability allows improved transfer speeds and data integrity
for compatible IDE devices. Set to [Disabled] to suppress Ultra DMA ca-
pability. NOTE: To make changes to this field, the Type field must be set
to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [Disabled]
ASUS P4T-F User’s Manual
55
4. BIOS SETUP
Other options for “Type:” are:
[CD-ROM] - for IDE CD-ROM drives
[LS-120] - for LS-120 compatible floppy disk drives
[ZIP] - for ZIP compatible disk drives
[MO] - for IDE magneto optical disk drives
[Other ATAPI Device] - for IDE devices not listed here
After using the legend keys to make your selections on this sub-menu,
press the <Esc> key to exit back to the Main menu. When the Main menu
appears, you will notice that the drive size appear in the field for the hard
disk drive that you just configured.
4.3.2 Keyboard Features
Boot Up NumLock Status [On]
This field enables users to activate the Number Lock function upon system
boot. Configuration options: [Off] [On]
Keyboard Auto-Repeat Rate [12/Sec]
This controls the speed at which the system registers repeated keystrokes.
Options range from 6 to 30 characters per second. Configuration options:
[6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec]
Keyboard Auto-Repeat Delay [1/4 Sec]
This field sets the time interval for displaying the first and second charac-
ters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec]
56
ASUS P4T-F User’s Manual
4. BIOS SETUP
Language [English]
This allows selection of the BIOS’displayed language. Currently only English is available.
Supervisor Password [Disabled] / User Password [Disabled]
These fields allow you to set the passwords. To set the password, highlight the appro-
priate field and press <Enter>. Type in a password and press <Enter>. You can type up
to eight alphanumeric characters. Symbols and other keys are ignored. To confirm the
password, type the password again and press the <Enter>. The password is now set to
[Enabled]. This password allows full access to the BIOS Setup menus. To clear the
password, highlight this field and press <Enter>. The same dialog box as above will
appear. Press <Enter> and the password will be set to [Disabled].
A Note about Passwords
The BIOS Setup program allows you to specify passwords in the Main menu. The
passwords control access to the BIOS during system startup. The passwords are not
case sensitive. In other words, it makes no difference whether you enter a password
using upper or lowercase letters. The BIOS Setup program allows you to specify two
separate passwords: a Supervisor password and a User password. When disabled, any-
one may access all BIOS Setup program functions. When enabled, the Supervisor
password is required for entering the BIOS Setup program and having full access to all
configuration fields.
Forgot the Password?
If you forgot the password, you can clear the password by erasing the CMOS Real Time
Clock (RTC) RAM. The RAM data containing the password information is powered by the
onboard button cell battery. To erase the RTC RAM: (1)Unplug your computer; (2)Uncap
the blue jumper cap from default [1-2]; (3)Place the jumper cap onto pins [2-3] to
short the RTC CMOS registry and erase its memory; (4)Uncap the jumpers and
return the cap to the operational default position [1-2]; (5)Turn ON your computer; (6)
Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.
Intel I/O
CLRTC
Controller
Hub
(ICH2)
P4T-F
Short solder points
to Clear CMOS
P4T-F Clear RTC RAM
Halt On [All Errors]
This field determines which types of errors will cause the system to halt. Configura-
tion options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but
Disk/Keyboard]
Installed Memory [XXX MB]
This display-only field displays the amount of conventional memory detected by the
system during bootup. You do not need to make changes to this field.
ASUS P4T-F User’s Manual
57
4. BIOS SETUP
4.4 Advanced Menu
CPU Internal Frequency [Manual]
When the motherboard is set to JumperFree™ mode, this field allows you
to select the internal frequency of your CPU. Select [Manual] if you want
to make changes to the subsequent 2 fields. Note that selecting a frequency
higher than the CPU manufacturer recommends may cause the system to
hang or crash.
CPU Frequency Multiple [14.0x]
This field automatically sets the frequency multiple between the CPU’s
internal frequency (CPU speed) and the external frequency. Set this field
in conjunction with the CPU Front Side Bus Frequency (MHz) to match
the speed of the CPU. Configuration options: [10x] [11x]...[19x] [20x]
CPU/Front Side Bus Frequency (MHz) (if CPU Speed set to [Manual])
This feature tells the clock generator which frequency to send to the
system bus and PCI bus. The bus frequency (external frequency)
multiplied by the bus multiple equals the CPU speed. Configuration ranges
from 100/33 to 227/57.
CPU Vcore [1.700V]
This field determines the range of core voltage available to the Central
Processing Unit. Configuration options: [1.850] [1.825] [1.800] [1.775]
[1.750] [1.725] [1.700]
RDRAM Turbo Mode [Disabled]
This feature enables the RDRAM Turbo feature. Select to improve system
performance. BIOS will optimize the RDRAM timing register.
Configuration options: [Disabled] [Enabled]
58
ASUS P4T-F User’s Manual
4. BIOS SETUP
RDRAM Frequency:FSB Ratio (MHz) [Auto]
This feature tells the clock generator which frequency to send to the
RDRAM. The default setting [Auto] makes the system detect and set the
ratio according to the type of RDRAM module. The [Auto] default bal-
ances performance with stability. Alternatively, with PC600 RDRAM, se-
lect [3x], and with PC800 RDRAM, select [4x]. If overclocking the CPU,
select [3x] to maintain stability. Configuration options: [Auto] [3x] [4x]
APIC [Disabled]
This field is an Advanced Programmable Interrupt Controller. It is
functional only with Windows XP or 2000. Enabling the A.P. I. C. feature
reduces interrupt sharing and improves system performance.
Configuration options: [Disabled] [Enabled]
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or choose
[Disabled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache.
Configuration options: [Disabled] [Enabled]
CPU Fast String [Enabled]
When set to [Enabled], the CPU has direct access to the memory. Leave on
default setting for best performance. Configuration options: [Disabled]
[Enabled]
FPU OPCODE Compatible Mode [Disabled]
Leave on default setting for optimized performance of Pentium 4 proces-
sor. Configuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This functions as an update loader integrated into the BIOS to supply the
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Con-
figuration options: [Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default of [Auto] allows the system to detect a PS/2 mouse on startup.
If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be re-
served for expansion cards only if a PS/2 mouse is not detected. [Enabled]
will always reserve IRQ12, whether on startup a PS/2 mouse is detected or
not. Configuration options: [Enabled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The de-
fault of [Auto] allows the system to detect a USB device on startup. If
detected, USB controller legacy mode will be enabled. If not detected, USB
controller legacy mode will be disabled. When this field is set to [Dis-
abled], USB controller legacy mode is disabled no matter whether you are
using a USB device or not. Configuration options: [Disabled] [Enabled]
[Auto]
ASUS P4T-F User’s Manual
59
4. BIOS SETUP
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than
64MB, you need to set this option to [Enabled]; otherwise, leave this on
[Disabled]. Configuration options: [Disabled] [Enabled]
Notes for JumperFree Mode
CPU Upgrade/Reinstallation
To ensure that your system can enter BIOS setup after the processor has
been changed or reinstalled, your system will start up running at a bus
speed of 100MHz and a fail-safe CPU internal frequency (8x100MHz). It
will then automatically take you to theAdvanced menu with a popup menu
of all the officially possible CPU internal frequencies.
System Hangup
If your system crashes or hangs due to improper frequency settings, power
OFF your system and restart. The system will start up in safe mode running
and enter BIOS setup.
60
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.4.1 Chip Configuration
Data Integrity Mode [Non-ECC]
This setting establishes the type of RDRAM memory installed on the com-
puter. Configuration options: [Non-ECC] [ECC]
RDRAM Pool B State [Standby]
This sets the operating state of the RDRAM devices in Pool B. Selecting
[Nap] allows the RDRAM in Pool B to enter power-saving mode. [Standby]
allows the RDRAM in Pool B to return to the working state quickly. Con-
figuration options: [Standby] [Nap]
AGP Fast-Write [Enabled]
This controls theAGP fast-write function. Configuration options: [Enabled]
[Disabled]
Graphics Window Size [64MB]
This feature allows you to select the size of mapped memory for AGP
graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB]
[64MB] [128MB] [256MB]
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache tech-
nology for the video memory of the processor. It can greatly improve the
display speed by caching the display data. You must set this to UC
(uncacheable) if your display card cannot support this feature; otherwise
your system may not boot. Configuration options: [UC] [USWC]
ASUS P4T-F User’s Manual
61
4. BIOS SETUP
Memory Hole At 15M-16M [Disabled]
This field allows you to reserve an address space for ISA expansion cards
that require it. Setting the address space to a particular setting will make
that memory space unavailable to the system. Expansion cards can only
access memory up to 16MB. Configuration options: [Disabled] [Enabled]
PCI 2.1 Support [Enabled]
This function allows you to enable or disable PCI 2.1 features including
passive release and delayed transaction. Configuration options: [Disabled]
[Enabled]
Onboard PCI IDE Enable [Both]
You can select to enable the primary IDE channel, secondary IDE channel,
both, or disable both channels. Configuration options: [Both] [Primary]
[Secondary] [Disabled]
62
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.4.2 I/O Device Configuration
Onboard AC97 Controller [Auto]
The motherboard offers an AC97 Audio Controller chip. BIOS will auto-
matically activate the Audio Controller if it is available. Configuration op-
tions; [Auto] [Disabled]
Onboard FDC Swap A&B [No Swap]
This option selects drive letter assignments. Configuration options; [No
Swap] [Swap AB]
Floppy Disk Access Control [R/W]
When set to [Read Only], this field protects files from being copied to
floppy disks by allowing reads from the floppy disk drive but not writes.
The setup default [R/W] allows both reads and writes. Configuration op-
tions: [R/W] [Read Only]
Onboard Serial Port 1 [3F8H/IRQ4], Onboard Serial Port 2 [2F8H/
IRQ3]
These fields allow you to set the addresses for the onboard serial connec-
tors. Serial Port 1 and Serial Port 2 must have different addresses. Con-
figuration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/
IRQ10] [Disabled]
UART2 Use Standard Infrared [Disabled]
When enabled, this field activates the onboard standard infrared feature
and sets the second serial UART to support the infrared module connector
on the motherboard. If your system already has a second serial port con-
nected to the onboard COM2 connector, it will no longer work if you en-
able the infrared feature. See Infrared Module Connector in
3.8 External Connectors. Configuration options: [Disabled] [Enabled]
ASUS P4T-F User’s Manual
63
4. BIOS SETUP
Onboard Parallel Port [378H/IRQ7]
This field sets the address of the onboard parallel port connector. If you
disable this feature, Parallel Port Mode and ECP DMA Select configura-
tions will not be available. Configuration options: [Disabled] [378H/IRQ7]
[278H/IRQ5]
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [Nor-
mal] allows normal-speed operation but in one direction only; [EPP] al-
lows bidirectional parallel port operation; [ECP] allows the parallel port to
operate in bidirectional DMA mode; [ECP+EPP] allows normal speed op-
eration in a two-way mode. Configuration options: [Normal] [EPP] [ECP]
[ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is available only if you select [ECP] or
[ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3]
Onboard Game Port [200H-207H]
This field sets the I/O address to the game port. Configuration options;
[200H-207H] [208H-20FH]
Onboard MIDI I/O [330H-331H]
This field sets the I/O address and IRQ for MIDI. Configuration options;
[330H-331H] [300H-301H]
Onboard MIDI IRQ [10]
This field indicates the onboard IRQ assignment for MIDI. Configuration
options; [3 ,4, 5, 7, 9, 10, 11, 12, 14, 15]
64
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.4.3 PCI Configuration
Slot 1 IRQ, Slot 2 IRQ, Slot 3, Slot 4, Slot 5 IRQ [Auto]
These fields set how IRQ use is determined for each PCI slot. The default
setting for each field is [Auto], which uses auto-routing to dassign IRQs.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14]
[15]
PCI/VGA Palette Snoop [Disabled]
Some nonstandard VGAcards, such as graphics accelerators or MPEG video
cards, may not show colors properly. The setting [Enabled] should correct
this problem. Otherwise, leave this on the default setting of [Disabled].
Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave on default setting for best performance vs. stability.
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [Enabled] if
you want to use USB devices. Configuration options: [Disabled] [Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows you
to select which of the cards will act as your primary graphics card. [AGP
Card] uses the AGP card as your primary card. The default, [PCI Card],
allows your PCI graphics card to take precedence when detected. Configu-
ration options: [PCI Card] [AGP Card]
ASUS P4T-F User’s Manual
65
4. BIOS SETUP
PCI/PNP IRQ Resource Exclusion
IRQ XX Reserved for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by an onboard legacy (non-PnP) device. The default value indi-
cates either that the displayed IRQ is not used or that the ISA Configura-
tion Utility (ICU) is being used to determine if a legacy device is using that
IRQ. If the IRQ is required by a legacy device, then reserce the IRQ by
selecting [Yes]. Otherwise, select [No/ICU] to release the IRQ to OS.
Configuration options: [No/ICU] [Yes]
66
ASUS P4T-F User’s Manual
4. BIOS SETUP
4.4.4 Shadow Configuration
Video ROM BIOS Shadow [Enabled]
This field allows you to change the video BIOS location from ROM to
RAM. Relocating to RAM enhances system performance, as information
access is faster than the ROM. Configuration options: [Disabled] [Enabled]
C8000-DFFFF Shadow [Disabled]
These fields are used for shadowing other expansion card ROMs. If you
install other expansion cards with ROMs on them, you will need to know
which addresses the ROMs use to shadow them specifically. Shadowing a
ROM reduces the memory available between 640K and 1024K by the
amount used for this purpose. Configuration options: [Disabled] [Enabled]
ASUS P4T-F User’s Manual
67
4. BIOS SETUP
4.5 Power Menu
The Power menu allows you to reduce power consumption. This feature turns off the
video display and shuts down the hard disk after a period of inactivity.
Power Management [User Define]
This option must be enabled to use any of the automatic power saving
features. If this menu item is set to [Disabled], power management features
will not function regardless of other field settings on this menu. The [User
Define] option allows you to make your own selections in the Power menu.
When set to [Max Saving], system power will be conserved to its greatest
amount. The Suspend Mode field will then be set to predefined value that
ensures maximum power savings.
This field acts as the master control for the power management modes.
[Max Saving] puts the system into power saving mode after a brief period
of system inactivity; [Min Saving] is almost the same as [Max Saving]
except that the system inactivity period is longer; [Disabled] disables the
power saving features; [User Define] allows you to set power saving op-
tions according to your preference. Configuration options: [User Define]
[Disabled] [Min Saving] [Max Saving]
IMPORTANT:Advanced Power Management (APM) should be installed to keep
the system time updated when the computer enters suspend mode activated by
the BIOS Power Management. For DOS environments, you need to add the state-
ment, DEVICE=C:\DOS\POWER.EXE, to your CONFIG.SYS file. For Win-
dows 3.x and Windows 95, you need to install Windows with the APM feature.
For Windows 98 and later, APM is automatically installed. A battery and power
cord icon labeled “Power Management” will appear in the “Control Panel.”
Choose “Advanced” in the Power Management Properties dialog box.
68
ASUS P4T-F User’s Manual
4. BIOS SETUP
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor
power management. Configuration options: [Always On] [Suspend -> Off]
Video Off Method [DPMS OFF]
This field defines the video off features. The DPMS (Display Power Manage-
ment System) feature allows the BIOS to control the video display card if it
supports the DPMS feature. [Blank Screen] only blanks the screen (use this
for monitors without power management or “green” features. If set up in your
system, your screen saver will not display with [Blank Screen] selected). [V/
H SYNC+Blank] blanks the screen and turns off vertical and horizontal scan-
ning. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS
Standby] [DPMS Suspend] [DPMS OFF] [DPMS Reduce ON]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inac-
tivity as set in this user-configurable field. This feature does not affect
SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] [3
Min]...[15 Min]
Suspend-to-RAM Capability [Disabled]
This field lets you to enable or disable the Suspend-to-RAM (STR) feature
allowing the system to go into suspend mode after the specified time in the
Suspend Mode parameter. Configuration options: [Disabled] [enabled]
Suspend Mode [Disabled]
Sets the time period before the system goes into suspend mode. Configu-
ration options: [Disabled] [30 Sec] [1 Min] [2 Min]...[1 Hour]
PWR Button < 4 Secs [Soft Off]
When set to [Soft off], the ATX switch can be used as a normal system
power-off button when pressed for less than 4 seconds. [Suspend] allows
the button to have a dual function where pressing less than 4 seconds will
place the system in sleep mode. Regardless of the setting, holding the ATX
switch for more than 4 seconds will power off the system. Configuration
options: [Soft off] [Suspend]
ASUS P4T-F User’s Manual
69
4. BIOS SETUP
4.5.1 Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system off and [En-
abled] reboots your system. [Previous State] sets your system back to the
state it is before the power interruption. Configuration options: [Disabled]
[Enabled] [Previous State]
PWR Up On external Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is
in Soft-off mode. NOTE: The computer cannot receive or transmit data
until the computer and applications are fully running. Thus connection can-
not be made on the first try. Turning an external modem off and then back
on while the computer is off causes an initialization string that will also
cause the system to power on. Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem card [Disabled]
Wake-On-LAN or a PCI modem card prermits PC bootup from another
computer via a network by sending a wake-up frame or signal. Configura-
tion options: [Disabled] [Enabled]
Wake On PS2 KB / PS2 Mouse [Disabled]
Wake On PS2 KB / PS2 Mouse permits PC bootup from the keyboard or
mouse. Configuration options: [Disabled] [Enabled]
IMPORTANT: This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.
70
ASUS P4T-F User’s Manual
4. BIOS SETUP
Wake On USB Device [Disabled]
Wake On USB permits PC bootup from a USB device. Configuration
options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may config-
ure your system to power up at a certain time of the day by selecting [Ev-
eryday] or at a certain time and day by selecting [By Date]. NOTE: Auto-
matic Power Up will not work if the system is powered down by operating
systems, such as Windows 98/2000/Millenium, that have ACPI support
enabled. Configuration options: [Disabled] [Everyday] [By Date]
4.5.2 Hardware Monitor
MB, CPU, TR Temperature [xxxC/xxxF]
The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore] only if necessary.
CPU Fan, PCI Fan, Main Fan Speed [xxxxRPM]
The onboard hardware monitor is able to detect the CPU fan speed, power
supply fan speed, and the chassis fan speed in rotations per minute (RPM).
The presence of the fans is automatically detected. Set to [Ignore] only if
necessary.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor is able to detect the voltage output by the
onboard voltage regulators. Set to [Ignore] only if necessary.
NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.
ASUS P4T-F User’s Manual
71
4. BIOS SETUP
4.6 Boot Menu
Boot Sequence
The Boot menu allows you to select among the four possible types of boot
devices listed using the up and down arrow keys. By using the <+> or
<Space> key, you can promote devices and by using the <-> key, you can
demote devices. Promotion or demotion of devices alters the priority which
the system uses to search for a boot device on system power up. Configu-
ration fields include Removable Devices, IDE Hard Drive, ATAPI CD-
ROM, and Other Boot Device.
Removable Device [Legacy Floppy]
Configuration options: [Disabled] [Legacy Floppy] [LS120] [ZIP] [ATAPI
MO] [USB-FDD] [USB ZIP]
IDE Hard Drive
This field allows you to select which IDE hard disk drive to use in the boot
sequence. Pressing [Enter] will show the product IDs of all connected IDE
hard disk drives.
ATAPI CD-ROM
This field allows you to select which ATAPI CD-ROM drive to use in the
boot sequence. Pressing [Enter] will show the product IDs of all your con-
nected ATAPI CD-ROM drives.
Other Boot Device Select [Disabled]
Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device
(Network)]
72
ASUS P4T-F User’s Manual
4. BIOS SETUP
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to
configure the PCI bus slots instead of using the BIOS. When [Yes] is se-
lected, interrupts may be reassigned by the OS. When a non-PnP OS is
installed or you want to prevent reassigning of interrupt settings, select the
default setting of [No]. Configuration options: [No] [Yes]
Boot Virus Detection [Enabled]
This field allows you to set boot virus detection, ensuring a virus-free boot
sector. The system halts and displays a warning message when it detects a
virus. If this occurs, you can either allow the operation to continue or use a
virus-free bootable floppy disk to restart and investigate your system. Con-
figuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping
retesting a second, third, and fourth time. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine
whether the drive has 40 or 80 tracks. Configuration options: [Disabled]
[Enabled]
ASUS P4T-F User’s Manual
73
4. BIOS SETUP
4.7 Exit Menu
Once you have made all of your selections from the various menus in the Setup pro-
gram, you should save your changes and exit Setup. Select Exit from the menu bar to
display the following menu:
NOTE: Pressing <Esc> does not exit this menu. You must select one of the
options from this menu or <F10> from the legend bar to exit this menu.
Exit Saving Changes
Once you are finished making your selections, choose this option from the
Exit menu to ensure the values you selected are saved to the CMOS RAM.
The CMOS RAM is sustained by an onboard backup battery and stays on
even when the PC is turned off. Once this option is selected, a confirmation
is asked. Select [Yes] to save changes and exit.
NOTE: If you attempt to exit the Setup program without saving your
changes, the program will prompt you with a message asking if you want
to save your changes before exiting. Pressing <Enter> will then save changes
while exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes you
have made to the Setup program. If you have made changes to fields other
than system date, system time, and password, the system will ask for con-
firmation before exiting.
74
ASUS P4T-F User’s Manual
4. BIOS SETUP
Load Setup Defaults
This option allows you to load the default values for each of the parameters
on the Setup menus. When this option is selected or if <F5> is pressed, a
confirmation is requested. Select [Yes] to load default values. You can now
select Exit Saving Changes or make other changes before saving the val-
ues to the non-volatile RAM.
Discard Changes
This option allows you to discard the selections you made and restore the
values you previously saved. After selecting this option, a confirmation is
requested. Select [Yes] to discard any changes and load the previously saved
values.
Save Changes
This option saves your selections without exiting the Setup program. You
can then return to other menus and make changes. After selecting this op-
tion, all selections are saved and a confirmation is requested. Select [Yes]
to save any changes to the non-volatile RAM.
ASUS P4T-F User’s Manual
75
4. BIOS SETUP
(This page was intentionally left blank.)
76
ASUS P4T-F User’s Manual
5. SOFTWARE SETUP
5.1 Install Operating System
You should always use the latest operating system and updates when using new
hardware to ensure full compliancy. You may use any version of Windows 98/2000/
Millenium, but for Windows 95, you must use OSR 2.0 or later. For Windows NT
4.0, you must use Service Pack 3.0 or later.
5.2 Start Windows
When you start Windows 98 for the first time after installing your motherboard,
Windows will detect all plug-and play devices. Follow theAdd New Hardware Wiz-
ard to install all necessary device drivers. When prompted to restart, select No and
then follow the setup procedures in this section.
NOTE: Because there are various motherboard settings, options, and expansion
cards, the following can only be used as a general reference and may not be an exact
reflection of your system.
ASUS P4T-F User’s Manual
77
5. SOFTWARE SETUP
5.3 P4T-F Motherboard Support CD
NOTE: The support CD contents are subject to change at any time without notice.
To begin using your support CD disc, just insert it into your CD-ROM drive and the
support CD installation menu should appear. If the menu does not appear, double-
click or run E:\ASSETUP.EXE (assuming that your CD-ROM drive is drive E:).
5.3.1 Installation Menu
•
INFUpdate Utility for Intel 850 Chipset: Installs INF files in Windows for the
following items: System and Graphics, LPC Interface, SM Bus, PCI Bridge,
Bus Master IDE, USB Host, and Controllers.
•
•
•
Intel Ultra ATA Storage Driver: Installs Intel’s storage driver.
Intel AC’97 Audio Controller - SigmaTel Codec: Installs Intel’s audio driver.
ASUS PC Probe Vx.xx: Installs a utility to monitor your computer’s fan,
temperature, and voltages.
•
ASUS Update Vx.xx: Installs a program to help you update your BIOS or
download a BIOS image file.
•
•
Microsoft DirectX x.x Driver: Installs Microsoft DirectX driver.
Adobe Acrobat Reader Vx.x: Installs the AdobeAcrobat Reader software nec-
essary to view user’s manuals saved in PDF format. Updated or other language
versions of this motherboard's manual is available in PDF format at any of our
web sites.
•
Cyberlink Video and Audio Applications: Installs Cyberlink PowerPlayer SE
and Cyberlink VideoLive Mail.
•
•
ASUS Screen Saver: Installs the ASUS screen saver.
Show Motherboard Information: Allows you to view information about your
motherboard, such as product name, BIOS version, and CPU.
(TO SEE THE FOLLOWING ITEMS, CLICK RIGHT ARROW ON THE LOWER-
RIGHT CORNER OF THE MAIN MENU)
78
ASUS P4T-F User’s Manual
5. SOFTWARE SETUP
Browse Support CD: Allows you to view the contents of the CD.
ReadMe: Allows you to view the support CD file list and contact information.
Exit: Exits the CD installation menu.
•
•
•
(TO RETURN TO THE MAIN MENU, CLICK LEFTARROW ON THE LOWER-
RIGHT CORNER OF THE SECONDARY MENU)
5.3.2 Installation Procedure
On the Installation Items Menu, click on the name of the driver or program group
to initiate installation. Follow the instructions that appear on the setup screens.
All drivers and programs will install automatically. Refer to the Software Reference
section for software operating instructions.
ASUS P4T-F User’s Manual
79
6. SOFTWARE REFERENCE
6.1 ASUS Live Update
ASUS LiveUpdate is a utility that allows you to update your motherboard’s
BIOS and drivers. The use of this utility requires that you are properly con-
nected to the Internet through an Internet Service Provider (ISP).
1. Start ASUS Update
Launch the utility from your Windows Start
menu:Programs/AsusUpdate
2. Select an update method.
3. If you selected updating/downloading
from the Internet, you will need to select
an Internet site. Choose the site that is
closest to you or click Auto Select.
4. From the FTP site, select the BIOS
version that you wish to download. Click
Next.
5. Follow the instructions on the succeed-
ing screens to complete the update
process. If you selected the option to
update the BIOS from a file, a window
pops up prompting you to locate the file.
Select the file, click Save, then follow the
screen instructions to complete the update
process.
80
ASUS P4T-F User’s Manual
6. SOFTWARE REFERENCE
6.2 ASUS PC Probe
ASUS PC Probe is a convenient utility to continuously monitor your com-
puter system’s vital components, such as fan rotations, voltages, and tem-
peratures. It also has a utility that lets you review useful information about
your computer, such as hard disk space, memory usage, and CPU type, CPU
speed, and internal/external frequencies through the DMI Explorer.
6.2.1 Starting ASUS PC Probe
WhenASUS PC Probe starts, a splash screen appears allowing you to select
whether to show the screen again when you open PC Probe or not. To by-
pass this startup screen, clear the Show up in next execution check box.
To open ASUS PC Probe, click the Windows Start button, point to Pro-
grams, and then ASUS Utility, and then click Probe Vx.xx.
The PC Probe icon
will appear on the taskbar’s system tray indicating
that ASUS PC Probe is running. Clicking the icon will allow you to see the
status of your PC.
ASUS P4T-F User’s Manual
81
6. SOFTWARE REFERENCE
6.2.2 Using ASUS PC Probe
Monitoring
Monitor Summary
Shows a summary of the items being
monitored.
Temperature Monitor
Shows the PC’s temperature (for
supported processors only).
Temperature Warning
threshold adjustment
(Move the slider up to increase the
threshold level or down to decrease
the threshold level)
Fan Monitor
Shows the PC’s fan rotation.
Fan Warning
threshold adjustment
(Move the slider up to increase the
threshold level or down to decrease
the threshold level)
Voltage Monitor
Shows the PC’s voltages.
82
ASUS P4T-F User’s Manual
6. SOFTWARE REFERENCE
Settings
Lets you set threshold levels and poll-
ing intervals or refresh times of the PC’s
temperature, fan rotation, and voltages.
CPU Cooling System Setup
Lets you select when to enable
software CPU cooling. When
When CPU Overheated is
selected, the CPU cooling
system is enabled whenever the
CPU temperature reaches the
threshold value.
History
Lets you record the monitoring activ-
ity of a certain component of your PC
for future reference.
Fan Control
Lets you enable/disable Smart Fan Con-
trol. Smart Fan Control adjusts the fan
speed automatically based on the current
CPU temperature and predefined thresh-
old.
Information
Hard Drives
Shows the used and free space of the
PC’s hard disk drives and the file allo-
cation table or file system used.
ASUS P4T-F User’s Manual
83
6. SOFTWARE REFERENCE
Memory
Shows the PC’s memory load, memory
usage, and paging file usage.
Device Summary
Shows a summary of devices in your PC.
DMI Explorer
Shows information pertinent to the PC,
such as CPU type, CPU speed, and in-
ternal/external frequencies, and memory
size.
Utility
Lets you run programs outside of the
ASUS Probe modules. To run a program,
click Execute Program. NOTE: This
feature is currently unavailable.
84
ASUS P4T-F User’s Manual
6. SOFTWARE REFERENCE
6.2.3 ASUS PC Probe Task Bar Icon
Right clicking the PC Probe
icon will bring up a menu to
open or exit ASUS PC Probe
and pause or resume all sys-
tem monitoring.
When the ASUS PC Probe
senses a problem with your
PC, portions of the ASUS PC
Probe icon changes to red, the
PC speaker beeps, and the
ASUS PC Probe monitor is dis-
played.
ASUS P4T-F User’s Manual
85
6. SOFTWARE REFERENCE
6.3 CyberLink PowerPlayer SE
CyberLink PowerPlayer SE is an intelligent software player that can automatically
detect and playback all kinds of video/audio files, CD and MP3 files as well. This is
the only software you need for all types of video and audio files. No need to waste
time identifying your file types.
6.3.1 Starting CyberLink PowerPlayer SE
To start CyberLink Power Player, click the Windows Start button, point to Pro-
grams, and then CyberLink PowerPlayer SE, and then click PowerPlayer.
6.3.2 CyberLink PowerPlayer Control Panel
Minimize
Zoom
Eject
Help
About
Power Off
Stop
Backward Scan
Forward Scan
Step Frame
Backstep Frame
Previous
Next
Play
Stop
Configuration
i-Power!
Increase Volume
CD Mode
Shuffle
Mute
Decrease Volume
Karaoke
Next angle
Go-Up
Next audio stream
Repeat
Next subtitle Add bookmark
Capture frame
Menu
Go to bookmark
86
ASUS P4T-F User’s Manual
6. SOFTWARE REFERENCE
6.4 CyberLink VideoLive Mail
CyberLink’s VideoLive Mail Plus Ver 3.0 (a.k.a. VLM 3) is a convenient and excel-
lent way to create professional quality video mails from PC video/audio input de-
vices and to send the mails to any recipients via VLM 3’s built-in e-mail system
through the Internet. VLM 3’s mails comprise video, sound, or snapshot informa-
tion; and thus may convey the most profound information to target audiences. It is
very convenient for mail recipients who do not need to install additional software
component in order to view VLM 3 mails.
VLM 3 works as a very applicant sales tool. It efficiently delivers profound and live
product information to your target customers without costing a fortune. VLM 3 also
helps corporate managers easily give vivid speeches and broadcast through corpo-
rate E-mail system. For personal or home users, VLM 3 easily records live video
clips allowing users to send them to friends or family members across the Internet.
VLM 3 loads video messages from PC cameras, digital camcorders, analog camcorder
via video capture cards, or from an existing AVI video clips, and captures audio
messages from PC microphones. Video and audio messages are encoded at a very
high compressed rate in a real-time mode. From data input, data conversion, to
sending video mails via Internet, or saving data to disks, the whole procedure is
done in an easy and continuous process.
VLM 3’s video clip compression rate is up to 1:900, and its playback rate is up to 30
frame per second. VLM 3 provides CIF (352 x 288 pixel) display resolution, and
support true color configuration. A one-minute video mail with QCIF (176 x 144)
resolution takes up less than 500KB of memory, making it easy to transmit and save
mail. Users may always adjust resolution and recording parameters for different
purpose.
VLM 3 supports all the hardware devices that are compliant with Video for Win-
dows standard. Video for Windows is a well-accepted and well-tested standard. Thus,
users do not have to worry about compatibility issues.
ASUS P4T-F User’s Manual
87
6. SOFTWARE REFERENCE
6.4.1 Starting VideoLive Mail
To start VideoLive Mail, click the Windows Start button, point to Programs, and
then CyberLink VideoLive Mail, and then click VideoLive Mail x.x. VLM 3’s
Setup Wizard will start and guide you through configuring the video and audio input
peripherals and to setup the e-mail environment.
1. Setup Wizard first will prompt a dialog to confirm that you want to configure
the hardware and E-mail setting. Click Yes to continue the system parameter
configuration.
2. The e-mail configuration screen appears. You will need to enter your name and
the e-mail address. Click Next to continue.
3. The Internet e-mail configuration screen appears. You may choose to use the
VLM 3 built-in E-mail functionality (SMTP mail), or use MAPI compliant e-
mail system. Consult your ISP or MIS staff for the E-mail server IP address if
you are not sure. Click Next to continue.
4. Then the Video Configuration screen shows up. You may have to specify the
video driver for VLM 3, if there are several video-input devices installed. Then
configure the number of video frames to be captured per second. Note that the
more frames you choose, the bigger the file size will be. Click Next to continue.
5. Then the Setup Wizard will then search for the GSM CODECS module for au-
dio compression, and prompt you with the result. Click Next to continue.
6. Setup Wizard then tests the audio volume during playing and recording. Click
Next when ready.
7. Configuration done. Click Finish to complete the environmental setting proce-
dure.
6.4.2 CyberLink VideoLive Mail User Interface
Exit
Minimize
Help
Video Mail Wizard
Save Video File
Snapshot to File
Send Mail
Load Video File
Video Configuration
Send Mail
Increase MIC volume
Decrease MIC volume
Increase speaker volume
Decrease speaker
volume
88
ASUS P4T-F User’s Manual
7. APPENDIX
7.1 Glossary
1394
1394 is the IEEE designation for a high performance serial bus tht offers data transfers at 100/
200/400 Mbps. This serial bus defines both a back plane physical layer and a point-to-point
cable-connected virtual bus. The primary application of the cable version is the integration of
I/O connectivity at the back panel of personal computers using a low-cost, scalable, high-
speed serial interface. The 1394 standard also provides new services such as live connect/
disconnect capability for external devices including disk drives, printers and hand-held pe-
ripherals such as scanners and cameras. This is a new standard to complement the slower
USB interface and to compete with the more expensive SCSI interface.
AC97 (Audio Codec '97)
AC '97 is the next step in enabling PCs with audio quality comparable to consumer electron-
ics devices. The specification defines new cost-effective options to help integrate the compo-
nents necessary to support next-generation auto-intensive PC applications such as DVD, 3-D
multiplayer gaming and interactive music. The specification also defines new extensions sup-
porting modem and docking to help both desktop and mobile manufacturers adopt these new
technologies more quickly and cost-effectively. This specification uses software emulation to
compete with the PCI SoundBlaster specification.
ACPI (Advanced Configuration and Power Interface)
The ACPI specification defines a cross-platform interface designed to support many operat-
ing systems. ACPI defines a flexible and abstract hardware interface that provides a standard
way to integrate power management features throughout a PC system, including hardware,
operating system and application software. This enables the system to automatically turn ON
and OFF peripherals such as CD-ROMs, network cards, hard disk drives, and printers, as well
as consumer devices connected to the PC such as VCRs, TVs, phones, and stereos. With this
technology, peripherals will also be able to activate the PC. For example, inserting a tape into
a VCR can turn on the PC, which could then activate a large-screen TV and high-fidelity
sound system.
AGP (Accelerated Graphics Port)
An interface specification that enables high-performance 3D graphics on mainstream PCs.
AGP was designed to offer the necessary bandwidth and latency to perform texture mapping
directly from system memory.
Bus
Bus Frequency
Bandwidth
Data Transfer Rate
PCI
33MHz
66MHz
66MHz
66MHz
33MHz
66MHz
133MHz
266MHz
133MByte/sec
266MByte/sec
512MByte/sec
1024MByte/sec
AGP 1X
AGP 2X
AGP 4X
Backup. A copy of a file, directory, or volume on a separate storage device from the original.
This copy is for the purpose of data retrieval in case the original is accidentally erased, dam-
aged, or destroyed.
BIOS (Basic Input/Output System)
BIOS is a set of routines that affect how the computer transfers data between computer com-
ponents, such as memory, disks, and the display adapter. The BIOS instructions are built into
the computer’s read-only memory. BIOS parameters can be configured by the user through
the BIOS Setup program. The BIOS can be updated using the provided utility to copy a new
BIOS file into the EEPROM.
Bit (Binary Digit)
Represents the smallest unit of data used by the computer. A bit can have one of two values:
0 or 1.
ASUS P4T-F User’s Manual
89
7. APPENDIX
Boot
Boot means to start the computer operating system by loading it into system memory. When
the manual instructs you to “boot” your system (or computer), it means to turn ON your
computer. “Reboot” means to restart your computer. When using Windows 95 or later, select-
ing “Restart” from “Start | Shut Down...” will reboot your computer.
Bus Master IDE
PIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting
for mechanical events. Bus master IDE transfers data to/from the memory without interrupt-
ing the CPU. Bus master IDE driver and bus master IDE hard disk drives are required to
support bus master IDE mode.
Byte (Binary Term)
One byte is a group of eight contiguous bits. Abyte is used to represent a single alphanumeric
character, punctuation mark, or other symbol.
Cache Memory. A type of RAM that allows a faster from the CPU than a regular RAM. The
cache memory eliminates the CPU wait state. When the CPU reads data from the main memory,
a copy of this data is stored in the cache memory. The next time the same address, the data is
transferred from the cache memory instead of from the main memory.
CODEC (Compressor/Decompressor). A software component that translates video or au-
dio between its uncompressed form and the compressed form in which it is stored.
COM Port
COM is a logical device name used by to designate the computer serial ports. Pointing de-
vices, modems, and infrared modules can be connected to COM ports. Each COM port is
configured to use a different IRQ and address assignment.
Concurrent PCI
Concurrent PCI maximizes system performance with simultaneous CPU, PCI and ISA bus
activities. It includes multi-transaction timing, enhanced write performance, a passive release
mechanism and support for PCI 2.1 compliant delayed transactions. Concurrent PCI provides
increased bandwidth, reduced system latencies, improves video and audio performance, and
improves processing of host based applications.
CPU (Central Processing Unit)
The CPU, sometimes called “Processor,” actually functions as the “brain” of the computer. It
interprets and executes program commands and processes data stored in memory. Currently,
there are socket 370 (for Pentium III FC-PGA and Celeron-PPGA), socket 7 (for Pentium,
AMD, Cyrix, IBM), slot 1 (for Pentium II and III), slot 2 (for Xeon), and slot A (for AMD)
processors.
Device Driver
A device driver is a special set of instructions that allows the computer’s operating system to
communicate with devices such as VGA, audio, printer, or modem.
DOS (Disk Operating System)
DOS is the foundation on which all other programs and software applications operate, includ-
ing Windows. DOS is responsible for allocating system resources such as memory, CPU
time, disk space, and access to peripheral devices. For this reason, DOS constitutes the basic
interface between you and your computer.
DRAM (Dynamic Random Access Memory)
A type of RAM that requires refresh cycles to prevent the loss of the data stored in it.
There are several different types of DRAM such as, EDO DRAM (Extended Data Output
DRAM), SDRAM (Synchronous DRAM), and RDRAM (Rambus DRAM) and DDR DRAM,
(Double-Data Rate DRAM).
Flash ROM
non-volatile memory device that retains its data even when power is removed. This device is
similar to EPROM, but unlike EPROM which can be erased only using an ultra-violet light,
flash ROM can be electrically erased. Flash ROM is normally used for system BIOS, which
initiates hardware devices and sets up necessary parameters for the OS. Since the flash ROM
contents can be modified, users can easily update the BIOS..
90
ASUS P4T-F User’s Manual
7. APPENDIX
IDE (Integrated Drive Electronics)
IDE devices integrate the drive control circuitry directly on the drive itself, eliminating the
need for a separate adapter card (in the case for SCSI devices). UltraDMA/33 IDE devices
can achieve up to 33MB/Sec transfer.
I/O (Input/Output)
The data transfers from the input devices like a keyboard, mouse, or scanner, to the output
devices like a printer or the monitor screen.
I/O Address
The specific memory location for a particular device. Two devices cannot share the same I/O
address space.
IrDA (Infrared Data Association)
An internaltional organization that creates and promotes inter-operable, low cost, infrared
data interconnection standards that support a walk-up, point-to-point model. The IrDA proto-
col is designed to support transmission of data between two devices over short-range point-
to-point infrared at speeds between 9.6Kbps and 4Mbps.
ISP (Internet Service Provider)
A company that provides customer access to the Internet and the World Wide Web for a fee.
The ISP also provides Internet utilities and services like e-mail, newsgroup, weather reports,
and a host of others. The user can connect to the ISP using a modem installed in the computer
and connected to a phone line.
LPT Port (Line Printer Port)
Logical device name reserved by DOS for the computer parallel ports. Each LPT port is
configured to use a different IRQ and address assignment.
MMX
A set of 57 new instructions designed to accelerate multimedia and communications applica-
tions, such as 3D video, 3D sound, video conference.
Modem
A device that allows a computer to talk to another computer through the phone system.
Network
An interconnected computer system linked by telephone wires, or other means.
OnNow
The OnNow design initiative is a comprehensive, system-wide approach to system and de-
vice power control. OnNow is a term for PC that is always ON but appears OFF and responds
immediately to user or other requests. The OnNow design initiative involves changes that
will occur in the Microsoft Windows operating system, device drivers, hardware, and appli-
cations, and also relies on the changes defined in the Advanced Configuration and Power
Interface (ACPI) specification.
PC100/133
This is an industry-standard designation for memory capacity as a measure of the speed of the
memory bus. New platform requirements ensure that memory does not become a bottleneck
to system performance.
PCI Bus (Peripheral Component Interconnect Local Bus)
PCI bus is a standard specification that defines a 32-bit data bus interface.
PCI Bus Master
The PCI Bus Master can perform data transfer without local CPU help and the CPU can be
treated as one of the Bus Masters. PCI 2.1 supports concurrent PCI operation to allow the
local CPU and bus master to work simultaneously.
POST (Power On Self Test)
Powering on the computer initiates the POST, a series of software-controlled diagnostic tests.
The POST checks system memory, the motherboard circuitry, the display, the keyboard, the
diskette drive, and other I/O devices
ASUS P4T-F User’s Manual
91
7. APPENDIX
PS/2 Port
PS/2 ports are based on IBM Micro Channel Architecture. This type of architecture transfers
data through a 16-bit or 32-bit bus. A PS/2 mouse and/or keyboard may be used on ATX
motherboards.
RDRAM (Rambus DRAM)
Developed by Rambus, Inc., this type of memory can deliver up to 1.6GB of data per second.
RDRAM is the first interface standard that can be directly implemented on high performance
VLSI components such as, CMOS DRAMs, memory controllers, and graphics/video ICs.
RAM (RandomAccess Memory). The computer’s primary storage area used to write, store,
and retrieve information and program instructions which are passed to the CPU for process-
ing. The information in RAM can be repeatedly re-written with new data. Compared to other
storage media like magnetic tape, floppy disk, and hard disk, RAM has an extraordinarily fast
access rate. RAM, however, is volatile, which means that the data stored in it are lost when
the system power is turned off, or if power glitches occur. See also DRAM and SDRAM.
ROM (Read Only Memory)
ROM is nonvolatile memory used to store permanent programs (called firmware) used in
certain computer components. Flash ROM (or EEPROM) can be reprogrammed with new
programs (or BIOS).
SCSI (Small Computer System Interface)
High speed multi-threaded I/O interface defined by the X3T9.2 committee of the American
National Standards Institute (ANSI) for connecting many peripheral devices. The standard
started from 10MBytes/sec to 160MBytes/sec available today.
SDRAM (Synchronous DRAM)
A type of DRAM with access signals that are synchronized with the CPU clock, eliminating
the delay associated with data transfers between the CPU and memory. SDRAM takes memory
access away from the CPU control; internal registers in the memory accept the request, and
lets the CPU do something else while the data requested is assembled for the next time the
CPU talks to the memory.
SPD for SDRAM module
Serial Presence Detect (SPD) is most like an ID detect for SDRAM module, it using a EE-
PROM component on DIMM module for storing module configuration information inside.
The Serial Presence Detect function is implemented using a 2048 bit EEPROM component.
This nonvolatile storage device contains data programmed by the DIMM manufacturer that
identifies the module type and various SDRAM organization and timing parameters.
System Disk
A system disk contains the core file of an operating system that boots up the operating system.
TCP/IP (Transmission Control Protocol/Internet Protocol). The communications proto-
col used by the UNIX system and the Internet. TCP checks for lost packets, puts the data from
multiple packets into the correct order, and requests that missing or damaged packets be
resent.
USB (Universal Serial Bus)
A 4-pin serial cable bus that allows up to 127 plug and play computer peripherals such as
keyboard, mouse, joystick, scanner, printer, modem, and monitor to share a bandwidth through
a host scheduled token based protocol. This allows attaching or detaching while the host and
other peripherals are in operation. Supports synchronous and asynchronous transfer types
over the same set of wires up to 12Mbit/sec. USB 2.0 provides twice the transfer rate com-
pared to USB 1.0 and competes with the 1394 standard.
Wake-On-LAN
Computer will automatically wake-up upon receiving a wake-up packet through a Network
interface when it is under power soft-off, suspend or sleep mode.
92
ASUS P4T-F User’s Manual
INDEX
A
CPU Speed 58
CPU Temperature 71
CyberLink
PowerPlayer SE 86
VideoLive Mail 87
CyberLink PowerPlayer SE
Using 86
CyberLink VideoLive Mail
Using 87
Cylinders 54
AC PWR Loss Restart 70
Accelerated Graphics Port 31
AGP 31
AGP Slots 31
ASUS PC Probe
Using 81
ASUS Update
Using 80
ATAPI CD-ROM 72
ATX Power Switch Lead 41
Automatic Power Up 71
D
DIMMs. See Dual Inline Memory
B
Modules
DIP Switches 18
Discard Changes 75
BIOS
Beep Code 43
Shadow Configuration 67
System Hangup 60
E
ECP DMA Select 64
Exit Discarding Changes 74
Exit Saving Changes 74
Expansion Cards
AGP Pro 31
BIOS Beep Codes 43
Boot Sequence 72
Boot Up Floppy Seek 73
Boot Up NumLock Status 56
Boot Virus Detection 73
Assigning IRQs 30
Installing 29
C
Central Processing Unit 25
Central Processing Unit (CPU)
External Frequency 19, 22
CHS Capacity 55
COM 2 Bracket 33
Connectors
F
Floppy 3 Mode Support 52
Floppy Disk Drive Connector 34
G
Glossary 89
H
Floppy Disk Drive 34
IDE 35
Infrared Module 15, 39
Internal Audio 15, 37
Parallel Port 33
PS/2 Keyboard 32
PS/2 Mouse 32
Serial Port 33
Halt On 57
Hardware Setup
CPU Installation 25
Procedure 16
Head 55
Headers
USB 33
ASUS P4T-F User’s Manual
93
INDEX
USB 37, 38
O
I
Onboard AC97 Modem Controlle
63, 64
IDE Activity LED Lead 15, 39
IDE Connectors 35
IDE Hard Drive 72
Infrared Module Connector 15, 39
Installed Memory 57
Installing
CPU 25
Onboard Parallel Port 64
Onboard PCI IDE Enable 62
Onboard Serial Port 1 63
Onboard Serial Port 2 63
OS/2 Onboard Memory > 64M 60
Other Boot Device Select 72
Internal Audio Connector 37
Interrupts
P
Parallel Port Connector 33
Parallel Port Mode 64
PCI Latency Timer 65
PCI/VGA Palette Snoop 65
PIO Mode 55
Request Table 30
Standard Assignments 30
IRQ XX Used By ISA 66
J
Plug & Play O/S 73
JumperFree™ Mode 15, 18
Power Management 68
PowerPlayer SE
Using 86
K
Keyboard Lock Switch Lead 41
Procedures
L
CPU Installation 25
Updating BIOS 46
PS/2 Keyboard Connector 32
PS/2 Mouse Connector 32
PWR Up On Modem Act 70
LAN
Jumper Setting 21
Language 57
Leads
IDE Activity LED 39
Q
Legacy Diskette A 52
Legacy Diskette B 52
Load Setup Defaults 75
Quick Power On Self Test 73
R
M
Removable Device 72
Reset Switch Lead 41
Maximum LBA Capacity 55
MB Temperature 71
Memory Hole At 15M-16M 62
S
Save Changes 75
Sector 55
Motherboard
Settings 17
Multi-Sector Transfers 55
94
ASUS P4T-F User’s Manual
INDEX
VCORE 71
Serial Port Connectors 33
Settings
W
Onboard Audio 22
SMART Monitoring 55
SMI Lead 41
Wake On LAN 70, 71
Wake On Ring 70
Starting Up 43
Supervisor Password 57
Suspend Mode 69
System Date 52
System Memory 23
System Message LED Lead 41
System Power LED Lead 41
System Time 52
T
Translation Method 54
Type 53
U
UART2 Use Standard Infrared 63
Ultra DMA Mode 55
Universal Serial Bus Ports 33
Updating Your BIOS 45
USB Function 65
USB Headers 37, 38
USB Legacy Support 59
Using
ASUS PC Probe 81
ASUS Update 80
PowerPlayer SE 86
V
VCORE Voltage 71
Video ROM BIOS Shadow 67
VideoLive Mail 87
Using 87
Voltage
+12 71
+3.3 71
+5 71
ASUS P4T-F User’s Manual
95
NOTES
96
ASUS P4T-F User’s Manual
|