Acnodes RPS 1200 User Manual

User Manual  
RP 1205/1170/1190/1172/1192  
17-inch/19-inch/20-inch Rack  
mount LCD monitor  
RPS 1200/1170/1190  
17-inch/19-inch/20-inch Rack  
mount LCD monitor  
(supprt Sun Native resolution)  
© Copyright 2011 Acnodes, Inc.  
14628 Central Blvd,  
Chino, CA91710  
tel:909.597.7588, fax:909.597.1939  
All rights reserved. Product description and product specifications  
are subject to change without notice. For latest product information,  
please visit Acnodes’ web site at www.acnodes.com.  
1.1 Important Safeguards  
Chapter 1  
Please read all these instructions carefully before you use the device. Save this manual for future reference.  
What the warranty does not cover  
-Any product, on which the serial number has been defaced, modified or removed.  
- Damage, deterioration or malfunction resulting from:  
» Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
» Repair or attempted repair by anyone not authorized by us.  
» Any damage of the product due to shipment.  
» Removal or installation of the product.  
» Causs external to the product, such as electric power fluctuation or failure.  
» Use of supplies or parts not meet our specifications.  
» Normal wear and tear  
» Any other causes which does not relate to a product defect.  
- Removal, installation, and set-up service charges.  
© Copyright 2011 Acnodes, Inc.  
14628 Central Blvd,  
Chino, CA91710  
tel:909.597.7588, fax:909.597.1939  
All rights reserved. Product description and product specifications  
are subject to change without notice. For latest product information,  
please visit Acnodes’ web site at www.acnodes.com.  
1.2 Regulatory Notice  
Legal Information  
First English printing, October 2002  
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the  
contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that  
results from the use of this equpiment.  
Safety Instructions  
» Unplud equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.  
» Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-condition environment with temperatures  
not exceeding 40° Celsius (104° Fahrenheit).  
» When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to  
other equipment or injury to persons nearby.  
» When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply.  
Proper air convection is necessary to keep it from overheating  
» Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.  
» If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on  
the equipment’s electrical rating label. The voltage rating on the cord should be higher than the one listed on the  
equipment’s rating label.  
» Observe all precautions and warnings attached to the equipment.  
» If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by  
transient over-voltage.  
» Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or  
on other hardware may cause damage, fire or electrical shock.  
» Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its  
warranty.  
» If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.  
Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-  
tion.  
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. The equip-  
ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-  
tions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
» Re-position or relocate the receiving antenna  
» Increase the separation between the equipment and receiver.  
» Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
© Copyright 2011 Acnodes, Inc.  
14628 Central Blvd,  
Chino, CA91710  
tel:909.597.7588, fax:909.597.1939  
All rights reserved. Product description and product specifications  
are subject to change without notice. For latest product information,  
please visit Acnodes’ web site at www.acnodes.com.  
1.3 Before Installation  
» It is very important to locate the Rackmount LCD Drawer/Display in a suitable environment.  
» The surface for placing and fixing the Rackmount LCD Drawer/Display should be stable and level or  
mounted into suitable cabinet.  
» Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive  
dust, dirt, heat, water, moisture and vibration.  
» Convenience for connecting the Rackmount LCD Drawer/Display to the related facilities should be well  
considered too.  
1.4 Unpacking  
The Rackmount LCD Drawer/Display comes with the standard parts shown on the package contents. Check and make sure  
they are included and in good condition. If anything is missing, or damage, contact the supplier immediately  
© Copyright 2011 Acnodes, Inc.  
14628 Central Blvd,  
Chino, CA91710  
tel:909.597.7588, fax:909.597.1939  
All rights reserved. Product description and product specifications  
are subject to change without notice. For latest product information,  
please visit Acnodes’ web site at www.acnodes.com.