SAMSUN G TELECO MMUN ICATIO N S AMERICA
1130 EAST ARAPAHO ROAD
1-800-987-HELP (4357)
WWW.SAMSUNG.CA
•
RICHARDSON, TX 75081
Use r Gu id e
Rev.2.0 11/02
GH68-03139A
SPH-A520 Series
P O R T A B L E
T r i - M o d e
T E L E P H O N E
User Guide
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property
of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not
limited to, accessories, parts, or software relating thereto (the “Phone System”), is
proprietary to Samsung and protected under federal laws, state laws, and international
treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship. You may not
infringe or otherwise violate the rights secured by the Intellectual Property. Moreover,
you agree that you will not (and will not attempt to) modify, prepare derivative works of,
reverse engineer, decompile, disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its
suppliers.
Samsung Telecommunications America (STA), Inc.
Headquarters:
Customer Care Center:
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7501
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972.761.7000
Fax: 972.761.7001
Internet Address: http://www.samsungusa.com or
Internet Address: http://www.telusmobility.com
©2002 TELE-MOBILE COMPANY. TM TELUS Mobility, the TELUS Mobility logo and
telusmobility.com are trademarks used under license from TELUS Corporation.
©2002 Samsung Telecommunications America, Inc. is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.
Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225;
5, 109, 390.
Printed in South Korea
GH68-03139A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties;
Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE
ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND
SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF
THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE
INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Disclaimer of Warranties;
Exclusion of Liability .............................................................. 3
LED indicator ....................................................................... 16
5
6
7
Reviewing stored voicemail and text messages
in standby mode....................................................................65
8
9
Games...................................................................... 86
Key commands......................................................................86
10
Usage guidelines:
all about performance and safety.............................98
Acknowledging Special Precautions
and Industry Canada Notice ...................................105
11
12
SPH-A520 open view
Speaker
Icons
Graphic area
Display screen
Navigation
key
Menu key
Volume
key
Internet access
End key
Ok key
Clear key
Send key
Keypad
Mail kit
Microphone
Adapter Outlet
14
Getting to know your phone
Antenna
The antenna is a device for transmitting and receiving signals. The shape and
size of the antenna is determined, in part, by the frequency of the signals that
they receive. An antenna makes the call sound clearer when it is fully extended.
Use only in the normal position and do not touch the antenna unnecessarily
when the phone is active.
Backlight features
Your keypad has user settable backlighting for easy visibility.
Clear key
The
key is used to erase/clear numbers or characters that may have been
incorrectly entered. Or, you can use it to return to a previous screen.
•If you enter an incorrect number or character on the display
screen, press
once briefly.
•To erase all digits or characters from the display screen, press
for two seconds.
•To back up one menu level, press
once briefly.
•To return to standby mode from any menu, press
seconds.
for two
End key
This
key is utilized in several ways:
•Press and hold
•Press and hold
to turn on your phone.
to turn off your phone.
•Press
once to disconnect a call, return to standby mode, or
cancel any input.
15
Headset connector
This is where the optional hands-free headset is connected. The headset
includes an earbud and microphone in a convenient, lightweight unit so you
can talk without using your hands.
•Before inserting the hands-free headset connector to your phone,
gently pry open the top of the cover to expose the headset
connector.
LED indicator
The LED indicator flashes to indicate an incoming call or message. When you
have the phone ringer set to off, the LED indicator notifies you of an incoming
call or message.
•The LED indicator lights momentarily when you power up the
phone.
Menu key
Press
to enter the Main menu.
Internet access
Press the
to access the Wireless web.
Microphone
The microphone is used for conversation and recording.
Keypad
Use these keys to enter text, numbers, and special characters.
OK key
The key stores information that you enter.
Speaker
The speaker is for listening to voice conversations.
16
Send key
The
key performs several useful functions:
•Press once to answer calls.
•Enter a number and press
once to connect a call.
•Press
twice in standby mode to redial the last outgoing
number.
Navigation
The Navigation key
allows you to locate different menu options by pressing
in the appropriate direction.
When in standby mode the navigation key also acts as a hot key.
Display screens
Your phone has two display screens:
The display screen on the front of your phone is comprised of three areas:
•An upper line of stationary icons
•The middle area shows the time of day
•The lower line showing the date
The display screen on the inside of your phone is comprised of three areas:
•An upper line of stationary icons
•The graphic area in the middle
•A lower line of text information
The top line of icons on the liquid crystal display (LCD), appear according to
the phone’s operating mode.
17
Display screen icons
Signal strength: This icon always appears when your phone is on. It
shows your current signal strength. More lines indicate more signal
strength.
Service indicator: This icon indicates a call is in progress. When
the phone is calling a number, this icon will flash until the call is
connected.
No service indicator: This icon indicates your phone cannot find a
signal because you’re outside a service area. You cannot make or
receive calls. Wait a little while for a signal or move into an open area.
Note: The no service indicator icon will always appear when you turn on your
phone. As soon as service is located, the indicator will disappear.
Roaming: This icon is your extended roaming indicator.
Analog: Indicates you are on an analog system.
Digital mode: This icon indicates your phone is operating in digital
mode. Your phone has some features that work only in a digital
service area; these services include the Web Browser and certain
other message(s) services. If this icon is absent, your phone is
operating in analog mode.
Vibrate mode: This icon indicates that an incoming call will make
the phone vibrate rather than ring.
Battery strength: This icon always displays when your phone is
active, it displays your battery charge level. The more black bars you
see, the greater the charge. When the battery becomes very low, a
flashing empty battery icon displays and the phone sounds an audible
alert; this indicates that your phone is about to turn itself off.
New message: This icon displays when you have a message waiting.
18
Alarm clock: This icon displays when you have your alarm clock set.
Ringer silent: This icon displays while in standby mode when your
phones ringer is set to silent.
Installing the battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter. The phone can be used while the
battery is charging, but must be fully charged the first time you use your
phone otherwise the battery could be damaged.
To attach the battery to your phone:
1. Gently place the battery into the provided slots on the underside of the
phone.
19
2. Gently push the top end of the battery down (The top end of the battery
displays the word Samsung in raised letters.) until you hear it click into
place.
Removing the battery
To remove the battery from your phone:
1. Turn the phone off by pressing and holding
.
2. Push the battery release latch up and pull the battery away from the latch.
3. Lift the battery away from the phone.
Charging the battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved travel adaptors and batteries. These adaptors are designed
20
to maximize battery life. Using other adaptors may invalidate your
warranty and may cause damage.
When the phone has finished charging it can be disconnected.
Travel adapter
Use the adaptor outlet to connect your phone to a wireless data device or a
hands-free car kit (both sold separately). The dual-slot adaptor outlet is
located at the bottom of the phone.
Using the travel adaptor
The travel adaptor allows you to charge your phone’s battery from any standard
120 VAC wall outlet. Also, using the travel adaptor allows you to make a phone
call while the battery is charging.
Follow these steps to use you travel adapter:
1. With the battery in position in the phone, attach the cord from the travel
adaptor by plugging it into the adaptor outlet at the bottom of the phone.
2. Connect the adaptor to a standard 120 VAC wall outlet. The battery will
begin charging immediately, and the LED (located at the top of your
phone) will light and remain red.
3. The LED indicates the status of the battery being charged.
21
•Red indicates that the battery is charging.
•Green indicates that the battery is fully charged.
4. Remove the adapter when the LED turns green.
Note: You can make a phone call when the phone is plugged into the travel
adaptor. The adaptor will continue to charge the battery even when you are
making the call. The battery charges faster when the phone is turned off.
Low battery indicator
You can tell whether or not your battery needs to be recharged by checking the
battery indicator (this icon
is located in the upper-right corner of the
display screen). The presence of all three bars indicate a full charge. No bars
(the battery icon is empty) means your battery must be charged.
The empty battery icon
Two to three minutes before the battery charge level gets too low to operate the
phone, the battery sensor will let you know by blinking an empty battery icon
(
), and sounding a tone. If you continue to operate the phone without
charging the battery, the phone will automatically turn off. If this happens, your
wireless call will be terminated. Be sure to monitor the battery strength icon
and make certain your battery is adequately charged.
22
Your phone’s modes
Answer mode
With this option activated, you can select how you want to answer your phone
when you receive an incoming call.
Digital mode
Some of your phones features work only in digital service areas, the
icon
indicates that your phone is operating in digital mode. If the digital icon is
absent, your phone is operating in analog mode.
Input mode
Use input mode to enter text, numbers and symbols into various screens.
Lock mode
When you lock your phone using the Lock Mode menu option, you restrict
phone usage. You can receive messages and calls, but you cannot make an
outgoing call until your phone is unlocked. You can unlock your phone, by
following the prompts and entering the lock code.
Power save mode
Your phone comes with a power save feature that automatically activates if your
phone is unable to find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge is conserved. The phone
automatically rechecks periodically for a signal. To manually force the phone
to recheck for a signal, press any key. A message on the display screen will
inform you when your phone is operating in the power save mode.
23
Silent mode
The Silent Mode feature allows you to silence the ringer when in standby mode.
•With the phone in standby mode, press and hold
for 2
seconds. Entering Silent Mode displays briefly.
•To exit from Silent Mode press and hold
for 2 seconds. The
screen prompt Exit Silent Mode displays, and your phone
automatically reactivates the previous ringer volume setting. (The
silent mode icon is removed from the standby screen.)
Standby mode
Standby mode is the fundamental state of your phone once your phone has
found service.
Your phone goes into standby mode:
1. After you power it on.
2. When you press
after a call, if your phone is on.
When in standby mode, you will see:
1. The month/date, and time.
2.
All other active icons.
While in standby mode, enter a phone number, and press
to call.
at any time to return to standby mode, but be careful; if you are on
Press
a call when you press
your call.
, you will return to standby mode and disconnect
Messages can also be received when in standby mode, the alert tone will sound
when a new message is received. The menu is accessed when you are in
standby mode by pressing
.
24
Talk mode
You can place and answer calls only when your phone is turned on. When you
are on a call your phone is in Talk mode. Pressing
In-Use menu options.
will display a list of the
Vibrate mode
In standby mode:
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume
.
2. The vibrate icon appears on the display.
To change the setting:
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume.
2. Your options are: Off, vibrate, 1 beep, level 1, level 2, level 3, level
4, level 5, level 6, level 7, level 8, and High+Vib.
3. The vibrate icon no longer appears on the display screen.
Getting Started
Getting service
You must contact your service provider and follow their instructions for
obtaining service for your phone. We suggest that you read this user guide to
fully understand the services that your phone supports.
25
Turning your phone on
To turn your phone on:
1. Fully extend the antenna for the clearest reception.
2. Press and hold
for more than two seconds.
Note: Your phone has a built-in antenna. As with any other radio-transmitting
device, do not touch the antenna as it affects call quality and can cause the
phone to operate at a higher power level than is necessary.
3. The LED indicator lights and a power-up alert sounds. The name of your
service provider momentarily appears on the display screen.
4. The phone begins searching for a network signal. When a signal is found,
the date, day, and time appears.
5. Your phone is now ready to place and receive calls.
If the phone is outside of your carrier’s coverage or roaming area you cannot
place or receive calls. You must try later when service becomes available.
26
Turning your phone off
To turn your phone off:
1. Press and hold
for more than two seconds.
2. The display screen and the backlight go off.
Note: If your phone is on, and
is pressed for less than one second, the
phone will not power off. This feature prevents your phone from being
turned off accidentally.
Several ways to answer a call
When you receive a call:
•
•
If the caller can be identified, the phone displays “Call from caller’s
phone number, (or name if pre-stored in your Phone Book)”.
If the caller cannot be identified, the phone displays “Call from Unknown
ID”.
There are several ways to answer an incoming call.
•Press
•Press any key
•Open
•Set the Auto Answer feature
Auto LCD off
This feature is provided to save the life of your battery. The LCD turns off if your
screen is idle for one minute.
Step ringer
This feature is provided to prevent injury to your hearing. When your phone
rings, it will ring from the lowest level (level 1) and then gradually ring to the
level that you have set.
Note: Your folder must be open for this feature to work.
27
List of main and sub menus
This list displays the Main menu structure and Message features. It shows the
individual sub menus and features assigned to each Main menu option.
Your phone offers a range of functions that allow you to tailor the phone to
your personal requirements. These functions are arranged in menus and
submenus.
The menus and submenus can be accessed by using the navigation key or using
shortcuts.
1. Call History
1:Outgoing Calls
2:Incoming Calls
3:Missed Calls
4:Erase History
1:Outgoing Calls
2:Incoming Calls
3:Missed Calls
4:All Calls
5:Air Time
1:Last Call
2:Total Calls
3:Erase All
4:Lifetime
2. PhoneBook
1:Find
2:Add New Entry
3:Group Setting
1:Family
2:Friends
3:Colleague
4:VIPs
5:No group
4:My Phone#
3. WirelessWeb
1:Downloads
1:Get New
2:Manage
2:Start Browser
3:Web Guard
4:Connection
28
4. Message
1:New Message
2:Inbox
1:Voice
2:Text
3:Web
3:Outbox
1:Sent
2:Stored
4:Delivery
5:MSG Setup
1:General
1:Scroll Timer
2:Msg. Remind
2:New Message
1:Call Back #
2:AutoSave
3:Entry Method
4:Delivery Ack
5:Canned Msg.
3:Erase
1:Clear VM Count
2:Received
3:Sent
4:Stored
5:All
5. Voice Dial
6. Tools
1:Record
2:Review
3:Erase All
4:Set Active
1:Today
2:Scheduler
3:Task List
4:Memo Pad
5:Alarm
6:Calculator
7:World Time
8:Countdown
9:Set Time
29
7. Setup
1:Display
1:Menu Style
2:Wall Paper
1:Local Image
2:Downloaded
3:Banner
4:Auto Hyphen
5:Backlight
6:Contrast
1:Main LCD
2:Front LCD
7:Version
2:Sounds
1:Ringer Volume
1:Calls
2:Messages
3:Alarm
2:Ringer Type
1:Voice Calls
1:with Caller ID
2:No Caller ID
2:Messages
1:Voicemail
2:Text
3:Web Alert
3:Data/Fax In
4:Schedule
3:Alerts
1:Minute Beep
2:Service
3:Connect
4:Disconnect
4:Roam Ringer
5:Key Beep
6:Tone Length
7:Power On/Off
3:Network
1:Set Mode
2:Set NAM
3:Call Guard
4:Security
1:Lock Phone
2:Restriction
3:Change Lock
30
4:Special #’s
5:Erase Pbook
6:Reset Phone
5:Others
1:Launch Pad
1:Up key
2:Down key
3:Right key
4:Left key
2:Answer Mode
3:Auto Answer
4:Language
8. Games
In Use
1:Push Push
1:Mute
2:Calls
3:Phonebook
4:3-Way Call
5:Messages
6:Tools
7:Version
31
Accessing menus using the navigation key
The Navigation key can also be used as a directional shortcut key to access the
following:
•PbookSearch
•VoiceDial
•Calculator
•Scheduler
•RingerType
•Worldtime
•Display
•Alarm
Using the Navigation key as a directional shortcut is called a Launch Pad.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Setup.
for Others.
for Launch Pad.
The following options appear:
•Up key
•Down key
•Right key
•Left key
5. Press the
accordingly to setup your options:
6.
= left
7.
= right
= up
8.
9.
= down
10. Press
to save your options.
32
Returning to the previous menu
When using the navigation key you can return to the previous menu at anytime.
To do this:
•
•
Press
Press
to return to the previous menu.
to exit the menu without saving the setting.
Accessing menus using shortcut numbers
All menus, menu levels, and menu content items are assigned numbers. All
menus and their contents can be accessed using these “Shortcut” numbers.
The following steps are a sample exercise to access games:
1. In standby mode, press
to access the Main menu.
2. Press
3. Press
for Games.
for Push Push.
4. Press to start.
Call history
Outgoing
To place a call press
to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you want to call (up to 32 digits), by pressing
the number keys. The phone numbers display from left to right.
2. Press
to place a call to the entered phone number.
33
Incoming
Your phone signals an incoming call or message in the following
ways:
•An animation message
•The backlight illuminates
•The red LED indicator flashes
•The ringer sounds (unless you have set the ringer to vibrate or off)
Incoming call notification continues until one of the following events
occurs:
•You answer the call
•The calling party ends the call
•The call is sent to voicemail
Your phone provides the following voice call notification features:
•Eight ring volume settings including 1- beep, vibrate, high+vib, or
off.
•Ring types and melody tones
•Name display with Caller ID. (If the caller’s name is programmed
into your Phone Book.)
•Automatic storage of an incoming call’s information to a call log.
(The last 10 calls you answered are stored in an Incoming call log
list and the last 10 calls you missed are stored in a Missed call log
list)
Missed
Your phone keeps a list of calls that you did not answer when the phone was
active and service available. The phone indicates a missed call by displaying a
text notification on the screen. Additionally, if caller information is available, a
Missed call entry is created, and the screen displays the phone number of the
most recent missed call.
34
Your phone has several convenient options for when you miss a call:
•Press
•Press
to call the displayed number.
to clear the Missed Call message from the display.
•View your Missed calls log.
Erase history
You can erase any one of the call directories (Outgoing, Incoming, or Missed),
or you can erase all three directories.
To erase all directories:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Call History.
for Erase History. The available options are:
•Outgoing Calls
•Incoming Calls
•Missed Calls
•All Calls
4. Press
for All Calls.
5. Press
6. Press
left for Yes to erase all your call directories, or right for No.
to save.
Reviewing calls
To review your calls:
1. In standby mode, press
to display the Main menu.
2. Press
for Call History.
3. Press the number associated with the call log to select an option:
•Press
•Press
•Press
•Press
for Outgoing calls.
for Incoming calls.
for Missed calls.
for Erase History.
35
•Press
for Air Time.
4. When the call log option displays, press
to locate the call
information you require. If there is a Phone Book match, the name
displays. If there is no Phone Book match, only the phone number will
display.
5. When your selection is highlighted you can:
•Press
to be connected to that party.
•Press to review all the available call information (name and
phone number [if available] and time/date stamp.)
•Press
6. Press
for more options.
to exit, and return to the previous screen.
Keeping track of call activity
Your phone saves a record of calling activity that permits you to easily return
calls.
Your phone retains the following call directories in memory:
•Outgoing: The last 10 calls placed from your phone.
•Incoming: The last 10 calls placed to your phone.
•Missed: The last 10 calls placed to your phone that you did not
answer.
•Erase History: The last 10 calls you chose to erase from your call
log.
•Air Time: The talk time spent on your calls.
Air time
Your phone records (or history), the amount of air time, or talk time used for
all calls.
To view Air Time from standby mode:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
36
for Call History.
for Air Time.
4. Press
to highlight an option. The available options are:
•Last Call
•Total Calls
•Erase All
•LifeTime
5. Press
to open an option, or press
to cancel, and return to the
previous screen.
Last call
Last call allows you to review the amount of time spent on the last call you
made.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Call History.
for Air Time.
for Last Call. The amount of time spent on your last call
displays.
5. Press
to return to the previous display screen.
Total calls
Total air time is the cumulative amount of time the phone has been used since
the total air time was last erased. Air time for all incoming and outgoing calls is
saved here. This feature is not intended for billing purposes.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Call History.
for Air Time.
for Total calls.
37
The screen displays the total number of calls, and the total air time for calls
made and received since you last set the Total air time to zero (by using the
Erase All option.)
5. Press
to return to the previous display screen.
Erase All
If you choose the Erase All option, the counter for all air times with the
exception of LifeTime, will be set to zero. The counter will begin counting the
next time you make or receive a call.
To erase your total air time:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
for Call History.
for Air Time.
for Erase All.
to highlight Yes or No.
6. With Yes highlighted, press
standby mode, or press
to erase all airtime and return to
to cancel the operation and return to the
previous display screen.
LifeTime
LifeTime air time is the amount of time the phone has been used since it was
first activated. Air time for all incoming and outgoing calls is saved here. This
feature is not intended for billing purposes.
Note: You cannot erase any information created by this option.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Call History.
for Air Time.
38
4. Press
for LifeTime.
The screen displays the total number of calls made from this phone, and the
total amount of air time used since this phone was set-up. This information
cannot be erased.
5. Press
to return to the previous display screen.
Call waiting
Your phone beeps when another call is coming in.
To answer this call:
1. Press
to call back later.
2. Press and they will be placed on hold.
. When connected, ask them to remain on the line or, request
You are now connected to your original call. You can press
between calls.
to alternate
Caller I.D.
This feature allows you to see who is calling you by displaying the callers
number when the phone rings. If the callers name and number are stored in
the phone book, the name also displays. You can also block your number from
being displayed on another phone by enabling the call block feature.
To activate call block:
1. Press
.
2. Enter the phone number and press
.
Note: To block your number permanently, contact your service provider.
39
Three way calling
To place a three way call:
1. Call the first party, and press
. When connected, ask them to remain
on the line, press
and they will be placed on hold.
2. Call the second phone number, and press
.
3. When the second party answers, press
connected.
and all parties will be
Note: You may need to contact your service carrier to set up Call waiting,
Caller I.D., and Three way calling.
Phone Book
Your phone permits you to store up to 500 items. Each entry can have up to 6
associated phone numbers, one e-mail, URL and birthday. Each entry can
contain up to 32 digits including hard pauses, with an associated name of up to
12 characters. (Name entry is optional). You can specify the memory location
of your choice for each entry. Memory locations can be marked Secret
preventing unauthorized viewing.
One-Touch, Two-Touch, and Three-Touch Dialing from your Phone Book
makes it easy to call a phone number stored in your Phone Book.
To access your Phone Book:
1. Press
2. Press
for the Main menu.
for Phone Book.
Use the instructions given in the following subsections to manipulate your
Phone Book.
40
Find
This option allows you to find a stored name (alphabetically) in the Phone
Book and place a call to that name.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Phone Book.
for Find.
left or right to find by Name, Entry, or Group.
5. Input your information and press
with the following options:
. The display screen prompts you
•Speed dial
•No Group
•Group Ring
•Off
•Image
6. Make your selection and press
to place the call.
7. Pressing
returns you to the previous screen.
Note: While in Find mode, press menu to edit your entry using the following
options:
•Send
•Edit
•Prepend
•Erase
•Send MSG
8. Press
to call the number.
Add new entry
To add a new entry:
1. In standby mode, press
to display the Main menu.
2. Press
for the Phone Book.
41
3. Press
for Add new entry.
4. Input your information and press
.
5. You can press
to return to the previous menu at any time.
Group edit
This option allows you to edit a group. Your group options are as follows:
•Family
•Friends
•Colleague
•VIPs
•No group
To edit a group:
1. In standby mode, press
to display the Main menu.
for the Phone Book.
for Group Setting.
to Rename the group, Change the color of your group
2. Press
3. Press
4. Press
indicator, or change the sound associated with that group.
5. Incorporate your changes.
6. Press
to save.
My phone #
To display your phone’s number:
1. In standby mode, press
to display the Main menu.
for the Phone Book.
for My Phone #. The phone’s number displays.
2. Press
3. Press
4. You can press
to return to the previous menu at any time.
42
Setting secret
This feature allows you to keep certain numbers in your Phone Book
confidential so that others cannot access them.
1. From the Phone Book (option) screen, press
to highlight Secret.
2. Press
3. Press
to highlight Secret On or Secret Off.
.
Note: All Phone Book entries can be made secret. If you access the
entry later, you will be prompted to enter your 4-digit user lock
code.
Editing phone book numbers
Once stored in the Phone Book, an entry can be changed quite easily.
To change a Phone Book entry:
1. In standby mode, press
to display the Main menu.
for Phone Book.
for Find.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press
to highlight the entry requiring editing.
. The existing phone number is highlighted.
and
to highlight the Edit option.
. The Phone Book (option) screen displays.
to save your changes.
Note: Press
until the existing number is deleted. Enter the new
number. (You can enter up to 32 digits.)
43
Overwriting existing name and number information
You can overwrite existing information using separate actions in both the name
and number fields. Follow these instructions:
1. At the Phone Book (options) screen, press
to highlight an existing
.
name or number field. When highlighted, press
2. To overwrite, press
, until you clear the existing name or number.
3. Enter the new information.
4. Press
again to save your entry.
Adding pauses
When you call automated systems (like banking services), you are often
required to enter a password or account number. Instead of manually entering
the numbers each time, you can store the numbers in your Phone Book
separated by special characters called pauses.
•P pause: A hard pause stops the calling sequence.
•T pause: A 2 second pause stops the calling sequence for 2
seconds and then automatically sends the remaining digits.
Note: Multiple 2 second pauses can be entered to extend the length of a
pause. For example, 2 consecutive 2 second pauses cause a total pause time
of 4 seconds. However, keep in mind that pauses count as digits towards the
32 digit calling maximum.
Storing pauses in a phone book entry
To store a number in your Phone Book that contains pauses:
1. Enter the phone number you want to store (such as the bank’s teleservice
phone number).
2. Press
3. Press
4. Press
. The pause menu options display.
to highlight one of the three pause menu options offered.
to select an option.
44
5. When the number and pauses are complete, press
to store the
number in your Phone Book.
Pause dialing from a stored entry
To pause dial from the Phone Book:
1. If you stored the number using (2 second) T pause(s), simply call the
number from the Phone Book.
2. If you stored the number using (hard) P pause(s), call the number from
the Phone Book and wait for the appropriate prompt from the number
you are calling (credit card number, bank account number, etc.).
3. Press
to call the number.
Manual pause calling
To manually call a number with pause(s) without storing to the
Phone Book:
1. Enter the phone number of the service you want to call (such as a bank’s
teleservice phone number). Begin by entering the number 1.
2. Press
pause option of choice and press
manner until you enter the complete number with pause(s).
to display the pause Menu options. Press
to locate the
to activate. Continue in this
3. Press
to call the number.
Note: Storing pauses is convenient if you plan to call the number frequently.
Erasing individual phone book entries
To erase an existing entry from either the Find by Name or Find by Entry
option.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Phone Book.
for Find.
45
4. Press
5. Press
to highlight the information and press
to display the following menu options:
.
•Send
•Edit
•Prepend
•Erase
•Send MSG.
6. Press
to highlight the Erase option.
. The phone prompts Yes or No.
to highlight your option.
7. Press
8. Press
9. Press
press
to confirm (Yes) and erase the Phone Book entry, or
to cancel (No) the Erase command.
Erasing your phone book
You can erase all the numbers stored in your Phone Book. This is useful if you
want to give your phone to a friend or family member, or if you need to erase
all of your phone numbers.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Security. Enter your current 4-digit lock code.
for Erase PBook. A confirmation message displays asking if
you still want to Erase.
4. Select Yes and press
press to cancel the operation. Erasing Phone Book displays. The
phone then returns to standby mode.
to erase the Phone Book entirely, or
46
Editing an existing e-mail address
To edit an existing e-mail address:
1. In standby mode, press
to display the Main menu.
for Phone Book.
for Find. The Phone Book displays.
to highlight the entry and press
, and select the Edit option. The Phone Book (options)
2. Press
3. Press
4. Press
5. Press
.
screen displays. Edit the existing E-mail address.
6. Press
to save.
Setting speed dial
For each name entered in the Phone Book, the option of designating a Speed
Dial number is available.
1. In standby mode, press
to display the Main menu.
for Phone Book.
for the Find.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press
to highlight your entry.
to display that entry’s phone number.
for options.
to highlight the Edit option.
. The Phone Book (options) screen displays.
9. Use the keypad to enter the associated Speed dial number.
10. Press to continue, following the prompts, or press
and return to the previous screen.
to cancel
47
Storing incoming phone numbers at the end of a
call
To store a phone number after ending a call:
Note: If the call was incoming, and Caller ID information was unavailable,
then the store option will also be unavailable.
1. Once you have pressed
to end your call, the screen displays the call
time (length of call), phone number and name of the party (if available).
2. Press
.
3. Follow the prompts to save the number.
Storing phone numbers from call logs
To store a phone number from the call logs:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Call History.
for Outgoing Calls,
for Incoming Calls, or
for
Missed Calls.
4. Highlight the number you want stored in the Phone Book and press
.
5. Press
for menu options, navigate to highlight Save.
Shortcuts to storing phone numbers
You can store a phone number by entering the number, and pressing
.
Follow the screen prompts to designate other information. You can also save a
number after an incoming or outgoing call.
48
One-touch dialing
Memory locations 001 through 009 are special One-Touch locations. You can
call the phone numbers stored in the Phone Book memory from 001 through
009 by pressing one key. For example, for location number 001. Press and
hold
until the name and number are displayed and called.
Two-touch dialing
Memory locations 010 through 099 are special Two-Touch locations. For
example, for location number 013, press
and hold
until the name
and number are displayed and called. To dial the number 100, Three Touch
dialing is required.
Three-touch dialing
Memory locations 100 through 500 are three-Touch locations. For example,
for location number 113, press
and hold
until the name and
number are displayed and called. To dial the number 100, Three Touch dialing
is required.
Shortcuts to memory dialing
Speed Dialing:
1. From standby mode, enter the entry’s Speed Dial number.
2. Press
to call.
Navigating to the number:
1. From standby mode, press
for Main menu.
2. Press
3. Press
for Phone Book.
for Find.
4. Use the navigation key to highlight the entry.
5. Press to call that entry’s Speed Dial number.
49
Wireless web
Your phone comes equipped with Wireless Web Internet access through a
MiniBrowser. The MiniBrowser displays immediate information through your
phone. You can view specially designed versions of popular sites which include
sports, weather, news, stock quotes, etc. Browsing the Web through your
phone is not the same as using your PC since site providers have only selected
certain aspects of the available sites to present to the wireless phone users and
have removed most graphics.
Each time you launch the MiniBrowser, the phone will connect to the Internet
and the service indicator icon will display. Any time the service indicator icon is
visible on the display, you are connected to the Internet and will be invoiced
accordingly. Rates and pricing vary according to your service option. For
further information contact your service provider.
The MiniBrowser will end an Internet connection after a certain period of
inactivity, however some information from your session remains stored in the
phone, and (if you leave your phone turned on) you can access this
information without reconnecting to the Internet. If you are viewing this stored
information, and you select a link to a site that was not accessed in your last
session, then you will automatically be re-connected to the Internet.
Note: The phone must be in a digital network to use the MiniBrowser. When
you are in a digital network, the
icon is displayed.
50
Launching the minibrowser
Note: The first time you use the MiniBrowser, you will be prompted to go
through a security setup process that takes approximately three to five
minutes.
Note: When the security key is initially sent to the carrier, a unique value is
created. If the phone is reset for any reason, you must contact the carrier to
reset the security key. The original key is no longer valid and will not allow
the MiniBrowser to operate.
To launch the MiniBrowser.
1. In standby mode, press
. You will see the following options:
•Downloads
•Start Browser
•Web guard
•Connection
2. Once connected, the Home Page (or the last page visited), displays. Press
and hold to access the MiniBrowser. An example of a Home Page
is shown below:
WEB HOME PAGE
1. Financial
2. Traffic
3. Travel
4. Weather
5. Sports
6. Entertainment
7. Games
8. Shopping
9. Portals
Note: What appears in the display window is dependent upon the service
provider content. To view additional text, press
.
51
3. Press
to exit the Web.
Navigating the web
When you use the MiniBrowser, some of the keys on your keypad will operate
differently than during a normal phone call.
The MiniBrowser presents on-screen items in any of the following ways:
•Text or number input
•Links (embedded in content)
•Numbered options (some options may not be numbered)
•Simple text
You can act on the options or links by using the soft keys.
How the minibrowser keys work
Navigation key: Use this key to find and select
all of your options.
OK: This key is used primarily for selecting the
highlighted item.
Internet key: Use this key for direct access to
the internet.
CLR: This key performs two functions:
•
It is used as a browser back-up key.
Pressing it once backs you up one page.
Pressing and holding it down backs you up
to the carrier’s Home Page.
•
It also clears entered text or numbers.
When entering numbers or text, press it to
clear the last number, letter, or symbol.
Press and hold it down to completely clear
the input field.
52
Asterisk / Shift: Press this key before entering
text to create upper case characters. You can also
use this key to move back one space on the
display screen.
0/Next: Press this key to enter a 0, or to move to
the next word when in T9 predictive word entry
mode.
Pound/Space: Press this key to insert a space
when entering text.
Numbers 1 - 9: If items on a menu are
numbered, these keys can be used to select them.
END: Press this key to exit the MiniBrowser and
return the phone to standby mode.
MENU: This key can be used to enter the
MiniBrowser menu at any time.
SEND: This key can be used to send a call.
Using links
Links have several purposes, including jumping to a different page, jumping to
a different site or even initiating a phone call from some sites. Links are shown
inside of brackets ([ ]), and you can normally use the left soft key to select a
link when it is highlighted.
53
Making a phone call while using the minibrowser
You may initiate a phone call from the MiniBrowser if the site you are using
supports this feature (the phone number may be highlighted and the left soft
key will appear as Call). Pressing the Call soft key will call the number. In most
cases you can also use
to call the number. The Internet connection will be
terminated when you initiate the call. After you end the call, your phone will
return to standby mode.
Messages
Your phone comes equipped with several ways to send and receive messages.
Mobile originating SMS text messaging
Note: Check with your service provider to confirm availability of this service.
Your phone is able to send and receive text messages. When a message is
received, your phone will sound an alert tone (unless turned off) and a new
message pop-up window displays on the screen.
Note: This memory is shared between all messages. 15KB of memory is
available for messages. The number of messages that can be stored is
dependent upon the length of the messages. Messages that you send can
contain a total of 150 characters.
54
Creating SMS text messages
1. In standby mode, press
to display Message.
2. Press
for New Messages. The screen displays Message To:.
.
3. Enter the destination phone number and press
4. Enter the message using the keypad and selected method of entry. When
finished, press
.
5. Press:
to send the SMS message.
•
•
•
•
.
to Save the SMS message
to edit the SMS message.
to discard and quit.
To continue, select from the following two menus:
6. Press
7. Press
.
to highlight the Options menu and press
. Select from
the following options:
•
•
Priority: Allows you to assign a priority to your messages.
•Urgent
•Normal
Validity: Allows you to select the period of time you want the message to
be available to the recipient.
•Always
•30 min.
•1 hour
•2 hours
•12 hours
•1 day
•2 days
•3 days
•
Send Later: Allows you decide when you want your message sent.
55
•Now
•30 min.
•1 hour
•2 hours
•12 hours
•1 day
•2 days
•3 days
•
•
Delivery Acknowledge: If this is set on, Message Save will notify you
if the message was successfully delivered.
Message Save: Provides options on how your message is saved.
•Save Outbox
•No Save
8. Press
following options:
Send: Allows you to send the message.
to highlight the Action menu and press
. Select from the
•
•
•
•
OK: Allows you to save the message.
CLR: Allows you to return to the previous menu.
END: Allows you to cancel the message and end the session.
Entering text, numbers, and/or symbols
At various times when using your phone, you will need to enter text in the
display screen. Some examples would be: adding an E-mail address, storing a
name in the Phone Book, entering events in the Scheduler, or inputting text
messages. If you want to enter text on the display screen.
1. When you are entering events, numbers, or text in your phone
select
to view the menu options:
•T9(English)
•Alpha
•Symbol
•Number
56
•.COM
•.NET
•Exit
•Canned
2. After you are in the correct menu, use the navigation key to highlight your
option, then press
to save. Enter your information. You can:
•
•
Press
Press
to insert a space.
to clear the last number, letter, or symbol, or
Press and hold
to completely clear the input field.
To change the input mode again:
1. Press
2. Press
3. Press
to view the options.
to highlight your choice.
to save.
•
T9(English): This is the predictive word entry mode. You can quickly
and easily enter frequently used words.
•
•
•
•
Alpha: This is the text entry mode.
Symbol: Symbol entry is used with number keys and associated symbols.
Number: This is the number entry mode.
.COM and .NET: These are URL extensions.
57
Alphabetical text entry
Alphabetical text entry characters may be entered in ABC mode, by pressing the
corresponding key to the letter you want to enter.
Press the same key repeatedly to change between the characters represented
by each key. To change capitalization formats while entering text, press
.
Entering numbers
This mode enables you to enter numbers into a text message.
Symbol entry
Symbol mode enables you to enter symbols into a text message. Use
to
display the options, then press the navigation key up/down to select the symbol
option. When displayed, use the navigation key to manipulate the symbols.
When in Symbol input mode, press the key shown on the display under the
required symbol.
T9® English text entry
T9 English, or T9 for text on 9 keys, requires only one key press per letter, and
recognizes the most commonly used word of a number sequence.
For example, to enter the word hello, you can spell out the word by pressing
only five keys, 4-3-5-5-6. T9 Text Input recognizes the most commonly used
word for that number sequence is hello. If two or more words share the same
number sequence, T9 provides the most commonly used word, with the ability
to navigate to the next most commonly used word by pressing
.
Press repeatedly to display all of the available words that T9 knows.
When the word you need displays, continue to enter text in the same way, or
change to another text or character entry mode.
Note: To type words not found in the T9 mode, change the text input mode to
ABC mode. You can include numbers between letters without exiting the T9
input mode by pressing and holding the desired number key.
58
New message
To send a new message:
1. In standby mode, press
to display Message.
2. Press
for New Messages.
3. The screen displays Message To:
4. Press
to view your text entry options.
5. After finding and entering the Message To: information, press
to go
to the Message body.
6. Enter your message data, (press
to select your text entry mode),
when finished, press to return to the New Message menu.
7. If the same message is to be sent to multiple recipients, press
to go
to the Message To menu.
8. Press
9. Press
and enter the number you want to send.
when finished.
10. To add additional recipient addresses, repeat the above steps. The
multiple destinations entered will be updated on the Message To
screen.
11. Press
at any time to dispatch the information.
59
Inbox
Your phone can store text messages in your inbox.
To view your messages:
1. In standby mode, press
to display the Message menu.
2. Press
3. Use the
4. Press
to open the Inbox.
to highlight the message you want to view.
. The phone displays the message contents.
5. While viewing your message press
to access the following options:
•Callback
•Reply
•Forward
•Save addr
•Erase
•Save cb#
Voice
Your phone alerts you when you have voice mail.
To check your message:
1. In standby mode, press
to display the Message menu.
2. Press
3. Press
for Voice.
to complete the action.
Note: Contact your service provider for availability.
Text
You are alerted when you have a text message.
To view your message:
1. In standby mode, press
to display the Message menu.
60
2. Press
3. Press
for Text.
to complete the action.
Note: Contact your service provider for availability.
Web
Your phone alerts you with incoming browser messages. When a new message
arrives, your phone will display a text notification together with an audible
alert.
You can access Web Alert from the Message menu:
1. In standby mode, press
to display the Message menu.
2. Press
3. Press
for Web.
to complete the action.
Note: Contact your service provider for availability.
Outbox
Your phone stores messages in Outbox, regardless of whether the message was
successfully transmitted. If No Save was not set in the Save Message setting
under Msg Setup, you can review, resend, or delete any message stored in the
Outbox. You can also verify if a message or E-Mail was successfully transmitted,
and at what date and time by opening the Delivery Acknowledgement feature.
Reviewing outbox
To review outgoing messages:
1. In standby mode, press
to display the Message menu.
2. Press
for Outbox. A list of messages displays.
3. Using the
4. Press
, highlight the message you want to review and press
.
for further options. A Sent Msg menu will display.
61
•
•
Select Re-send to resend the message, press
to resend with the
same message settings.
Select Erase to delete the message from Outbox.
Message memory capacity
Your phone can store up to 15K or 96 messages. The storage capacity includes
all received, sent, filed message types, VMN (Voicemail Notification), and text
messages. The number of messages stored, depends upon the length of each
message. When message memory reaches over 75% capacity, the screen
displays a text notification. At 100% capacity, the screen displays a text
notification and rejects additional incoming messages until you erase the
stored messages from Inbox, Outbox or Filed Msg.
Messages and lock mode
Incoming messages are received even when your phone is in Lock Mode. The
screen will display the time and date of the message but you cannot access the
message. To access the message, unlock the phone to proceed.
Message setup
1. In standby mode, press
to display the Message menu.
2. Press for Message setup.
You can preset a number of options for general settings or new messages. The
message indicator is displayed and remains on the screen until you listen to the
new voicemail message, read the New BrowserMsg or Text Msg.
Scroll timer
Scroll Timer allows you to select the amount of time you would like your scroll
to be available before closing.
62
Msg. Remind
Message Reminder allows you to select the number of times you would like to
be reminded that you have a message.
New message
Offers a number of options. Each option offers different features.
Callback #
Press
to automatically call the number displayed on the screen.
Autosave
Your options are On or Off. Press
to save the setting.
Auto Save - when set to On automatically saves the created message to the
Outbox after the message is transmitted. Your message is not saved when this
option is set to Off.
Entry Method
You can navigate between Alphabet and Word (predictive keypad) for the
default setting. Press
to save the setting.
Delivery ack.
This option is used to confirm message delivery.
Canned Msg.
Canned messages are pre-programmed into your phone. You can select the
number that is associated with each canned message, and press
to edit.
Once you are done editing your canned message, press to save.
63
Erase message
1. In standby mode, press
to display the Message menu.
2. Press
for Erase. Your options are:
•Clear VM Count
•Received
•Sent
•Stored
•All
3. Press
to highlight an option.
4. Press
to complete the action.
Receiving a message in standby mode
When your phone receives incoming messages in standby mode, the ringer
sounds, (unless it is turned off), and the screen displays: New Voicemail,
New Text, New Page or New BrowserMsg. The message icon is displayed,
and remains on display until you listen to, or read, the new message.
Receiving a message while on a call
You can easily review the new message while on the call by just pressing
Your call will not be disconnected, and you can ask the other party to wait
while you review the message.
.
Reviewing voice mails and text messages
When a message arrives, you can recall the sender’s call back number if it is
available, by pressing
. To review the message, press
. The Inbox
Msg list provides options for reviewing the sender’s name, number, date and
time information, and the message.
64
Reviewing stored voicemail and text messages in
standby mode
1. In standby mode, press
to display the Message menu. The
number of received or sent messages displays next to the associated
message type in the menu.
2. Press
for Voice. The date and time for the last voice mail
message received display with a notification of the number of new voice
mail messages.
•You can press
mails.
to call your mail box directly to review voice
•You can press
for Inbox. A list of messages displays.
•An exclamation point (!) next to an entry number indicates an
urgent message.
•An asterisk (*) next to an entry number indicates that the message
has not been read.
3. Use the
to highlight the message you want to review, press
to
open it.
•While reviewing the message, you can press the
to locate
message information such as: date and time, sender’s call back
number, senders number, E-Mail address, and message. However,
if you wait a few seconds the phone will automatically scroll
through the display.
4. Pressing
returns you to the previous screen.
Note: Press
for further options when reviewing a message. When in
standby mode, press and hold
to automatically dial voice mail.
Message options
When reviewing Messages, the menu provides a number of options. You can
return a call or text message to the phone number, or e-mail address in that
message, or you can forward the message to another.
65
1. In standby mode, press
to display the Message menu. A
number of received or sent messages displays next to the associated
message type in the menu.
2. For Text messages use the
to locate the message you want to review,
press
to open.
to view the following options:
3. Press
•Call Back: Automatically calls the number found in the message.
•Reply: to reply to the sender. The phone accesses the New Message
menu and copies the sender’s originating address to the Send To
field.
•Forward: to forward the message to another. The phone accesses
the New Message menu, and copies the sender’s message (body) to
the Message field.
•Save addr: to save the sender’s e-mail address to the Phone Book.
The address is automatically copied into the Add Entry or E-mail
Entry field.
•Erase: to delete the message from the Inbox.
•Save cb#: to save the call back number to the Phone Book. The
number is automatically copied to the Add Entry field.
4. Pressing
returns you to the previous Inbox messages list screen.
Voice Dial
Your phone features Voice Dial(ing). Using the Voice Dialing feature requires
that you first program the phone to recognize the name of the person you are
calling.You can call up to 10 stored names simply by speaking one of the
names into the microphone.
Note: You can store only one voice dial entry per stored name. You CANNOT
store multiple entries for a stored name.
66
Tips on recording names
•
Avoid recording similar names phonetically. If you record a name similar
to one already stored in voice memory, the phone requests another
name.
•
•
•
Avoid recording in a noisy place.
Speak clearly and naturally.
Avoid very long or very short names. Names with two to five syllables are
recommended.
•
If a voice entry does not properly connect, you may need to record the
name and number again.
Record
The phone provides voice prompts and screen displays to guide you through
the recording process.
To program the phone for voice calling:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Voice Dial.
for Record. The phone will prompt you to say the name you
want to record.
4. Wait for the beep and then say the name. For best results, use names with
at least two syllables, or use both a first and last name. The phone stores
the name as a “first” sample, and then prompts you to say the name
again.
5. Respond to the prompt by repeating the name exactly as you did the first
time. The phone stores the name as a second sample and then requests
the phone number.
6. Enter the phone number using the keypad.
67
7. Press
to save the number.
8. The screen then returns to the Voice Dial menu.
Review
To review voice calling entries:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Voice Dial.
for Review. A list of stored names and numbers display.
to highlight the desired entry and press
. The recorded
name is vocalized.
Erase all
To erase all voice calling entries
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for Voice Dial.
for Erase All.
4. At the voice and screen prompt, press
to confirm that you want to
Erase All of the entries. A screen prompt will display when the entries
have been erased.
5. Press
at any time to exit without removing any voice entries.
Set active
Voice dialing is always active once you have programmed the phone to accept
voice entries and associated the phone numbers. To place voice activated calls,
press and hold
name of the person you are calling into the phone or earbud microphone.
1. While in standby, press to display the Main menu
. After you hear the voice prompt and the beep, say the
2. Press
for Voice Dial.
68
3. Press
for Set Active.
Tools
Tools allows you to add events in a calendar. They can be viewed at anytime.
You can also set an alert to remind you of your plans.
1. In standby mode, press
to display the Main menu.
2. Press
for Tools.
to highlight an option. The available options are:
•Today
3. Press
•Scheduler
•Task List
•Memo Pad
•Alarm
•Calculator
•World Time
•Countdown
•Set Time
4. Press
to open that option.
Today
You can schedule up to 9 events for the current day by indicating each event’s
start and end time. You can be alerted by an alarm before an event is to
commence. Events that are scheduled for future dates automatically appear on
your Today events schedule on that particular day.
Scheduler
Scheduler functions allow you to schedule personal events and view them in an
easily read format.
69
How to schedule an event
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
for Tools.
for Scheduler.
to select View, or Add New.
to view your options.
to highlight an option.
to select that option.
Note: Press and hold
to navigate between text entry modes and number
icons, making it easier to enter information in the correct format.
8. Enter the event. (Up to 32 characters can be entered.)
9. Press to continue. The Start/End Time screen displays.
10. Add the start time and date using the keypad.
11. Add the end time and date.
12. Use the navigation key to highlight an alarm to notify you of your event.
The options are: No alarm, On time, 10Min before, 30Min before,
1Hour before.
13. Use the
to locate the option and press
to save. The phone
prompts that the information is Saved.
How to add, edit, or erase an event
1. In standby mode, press
for Tools.
2. Press
3. Press
to display Today.
.
4. Press for the following options:
•Add New: Allows you to add an event
70
•Edit: Allows you to edit an event
•Erase: Allows you to erase an event
5. Press
to select the option of choice, and complete the exercise by
following the prompts.
How to view an event
Scheduler allows you to view in calendar format the current month, a past
month or a future month. In Scheduler, the current date is highlighted on the
calendar. Days with scheduled events are marked with an asterisk(*).
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Tools.
for Scheduler.
4. A current calendar screen displays. The current date is highlighted.
5. Press the
6. Press the
right/left to select a new date.
up/down to view a new week.
7. Press the to view a new month.
8. Pressing at a selected date, offers the following options:
•View: Permits you to view the previous entries for that date
•Add New: Permits you to add a new entry for that date.
9. Use the navigation key to highlight Add New.
10. Press
to enter the option.
71
Task list
The Task List allows you to compile a list of items to be completed. Your phone
can store, prioritize and manage twenty Task List items.
Creating a task list item:
1. In standby mode, press
2. Press for Task List.
for the Tools.
3. Use the navigation key to set the priority for a Task List item. Your
choices are High and Low.
How to view, edit, add, or erase a task list item
1. In standby mode, press
2. Press for Task List. Press
change.
for the Tools.
to locate the event you want to
3. Press
4. Press
. Your options are: Add new, Edit, and Erase. Complete the
exercise by following the prompts.
Count down
Count Down allows you to find out how much time will elapse between the time
entered and a scheduled event. You can create up to twenty Countdown timers.
•
and
Countdowns can be entered for dates between the years 1980 and 2099.
for the Tools.
for Count Down. The screen prompts for a new Count
Down. Enter a name for your new Count Down timer.
3. Press
are equal to A.M. and P.M.
•
1. In standby mode, press
2. Press
.
72
4. Enter the date and time you want to “Count Down” to. For example: if
today’s date is April 1, 2001 and you want to know how many months,
days, and hours remain before 7:00 P.M. February 14th 2002, enter the
time 07:00 P.M. and the date 02/14/2002.
5. Press
to store the Count Down timer.
How to view, edit, add or erase a count down timer
1. In standby mode, press
for the Tools.
2. Press for Count Down. Countdown timers display in order of the
least amount of time passed since the countdown commenced, and least
amount of time remaining until the specified date.
3. Press
to open the options.
4. Press
to select the option. Use the navigation key to find the item you
want to change and follow the prompts.
5. Press
at any time to exit the exercise.
Alarm clock
Your phone has an Alarm Clock that can be set to go off once, or daily at a
specified time.
Once set, the Alarm Clock is easy to change or turn off completely.
To set the Alarm Clock:
1. In standby mode, press
for the Tools.
2. Press
3. Press
4. Press
for Alarm.
to the option you want to use.
. The Alarm Clock menu opens.
5. Using the keypad, follow the instruction given to enter the time for the
alarm to activate, and the Ringer Type. Press
press
to store the setting, or
to return to the previous alarm options menu.
73
Your phone only supports a 12 hour time display, it is necessary to press either
,or . These keys represent A.M. and P.M. respectively.
Note: Once an alarm is set, an alarm clock icon
in standby mode. When the alarm is turned off the alarm clock icon
removed.
displays on the screen
is
Calculator
You can perform calculations, including addition, subtraction, multiplication
and division using your phone.
To perform a calculation:
Use
to enter a decimal point, and
to change the sign for a number
to a negative.
1. In standby mode, press
for Tools.
2. Press
for Calculator. The Calculator screen displays.
3. Use the keypad to enter the first number in your calculator. (Numbers
can be up to 9 digits long.)
4. Use the navigation key to set the operation for your calculator. Your
choices are:
•[+] Addition
•[-] Subtraction
•[x] Multiplication
•[÷] Division
5. Use the keypad to enter the second number into your calculator.
74
6. Press
to perform the calculation and view the result, or continue to
calculate with the same operator, or change the operator and continue.
Every time you change the operator, the previous calculation is
performed and the result is displayed as the bottom number on the
display screen.
7. Press
to perform the calculation and view the result.
Setup
The following features allow you to personalize your phone.
Display
The following features offered under the Display menu allow you to customize
your phone.
•Menu Style
•Wallpaper
•Banner
•Auto Hyphen
•Backlight
•Contrast
•Version
Backlight
There are several options for setting the Backlight features.
Press any key and the backlight comes on.
Note: Backlight usage drains your battery faster.
75
To set the Backlight:
1. In standby mode, press
to display the Main menu.
2. Press
for Display.
for Backlight.
to go through the menu options:
3. Press
4. Press the
•Open
•30 seconds
•8 seconds
•Off
5. When the desired setting is reached, press
to save.
Banner
This option allows you to edit and personalize a banner to display on your
phone while in Standby Mode.
Note: Enter the personal greeting using the keypad, Press
for
T9(English), Alpha, symbols, Number, and Exit options respectively.
Note: The key also navigates through the same options in identical
order, and can be pressed for upper case characters.
To create a banner:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Display.
for Banner.
Note: Press and hold
to erase an existing banner.
4. Enter your new banner (Up to 12 characters).
5. Press
to save.
76
Contrast
The LCD has contrast setting that can help you see the screen better in different
lighting conditions.
To set the LCD contrast:
1. In standby mode, press
to display the Main menu.
for Display.
for Contrast.
2. Press
3. Press
4. Scroll between the contrast settings to determine what contrast is most
visible to you.
5. When the desired contrast setting displays, press
to save.
Auto hyphen
With the option set to Yes, your phone automatically hyphenates numbers. For
example: 555-555-5555.
To set the Auto Hyphen option:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
for Display.
for Auto Hyphen. The On and Off options display.
to highlight an option.
to save.
Note: You can press
to return to the previous menu at any time.
77
Version
You can view both the software version and hardware version running on your
phone. This feature is helpful if you need to call your carrier.
Note: You can press
to return to the previous menu at any time.
to display the Main menu.
1. In standby mode, press
2. Press
3. Press
for Display.
for Version. The hardware and software information is
displayed.
4. Press
to return to standby mode.
Sounds
Ringer options
Your phone provides a variety of ringer options through the Sounds menu.
These options allow you to customize your ringer type and ringer volume
settings in order to easily recognize a certain type of incoming call, message or
scheduled event.
Adjusting ringer volume (rapidly)
From standby mode, you can adjust the ringer to vibrate, 1-beep, silent, or
volume levels 1-8, High+Vibrate using the key.
Adjusting voice volume during a call
You can adjust the handset as well as the (optional) headset volume during a
call by using the
.
78
Adjusting voice volume during a call
You can adjust the voice volume only while on a call.
To adjust the voice volume option:
Press the up or down to change your volume setting while on a call. The
screen immediately displays the volume icon
icon will change according to the setting chosen.
. The bars of the volume
Ringer volume
To adjust the volume using the Sounds ringer volume option:
1. In standby mode, press to display the Main menu.
for Sounds.
for Ringer Volume.
2. Press
3. Press
4. Highlight your option and press
.
5. The screen immediately displays the volume icon
the bars of which
will change according to the setting chosen, you can also press the
down to change the setting. When the desired setting is reached,
press
to save.
to return to the previous menu at any time.
6. Press
Ringer type
Ten monotone ringer types and ten melody tones can be found under the
ringer type option in the Sounds menu.
Ringer type — calls
To activate, view or change the ringer type for calls:
1. In standby mode, press
to display the Main menu.
for Sounds.
for Ringer Type.
2. Press
3. Press
79
4. Press
for Voice Calls.
5. Use the
to navigate through the 10 monotone ringer types and 10
melody tones. Each tone plays as you navigate through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — message
To activate, view or change the ringer type for messages:
1. In standby mode, press to display the Main menu.
Sounds.
2. Press for
3. Press
4. Press
5. Press
Ringer Type.
Messages.
for Voicemail,
for Text, or
for Web Alerts.
6. Use the
options.
to hear tones. Each tone plays as you navigate through the
7. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — data/fax incoming
To activate, view or change the ringer type for incoming data/fax
calls:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type
for Data/Fax In.
5. Use the
options.
to hear tones. Each tone plays as you navigate through the
80
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — tools
To activate, view or change the ringer type:
1. In standby mode, press to display the Main menu.
for Sounds.
2. Press
3. Press
4. Press
for Ringer Type
for Schedule.
5. Use the
options.
to hear tones. Each tone plays as you navigate through the
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
81
Key beep
Key Beep allows you to adjust the tone length and volume level that the keypad
generates each time you press a key. The display icon shows up to 8 levels (the
loudest setting). No bars indicate that the key beep function is silenced.
1. In standby mode, press
to display the Main menu.
for Sounds.
for Key Beep.
2. Press
3. Press
4. Press the to adjust level or tone.
5. When the desired level or tone is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Tone Length
1. In standby mode, press
to display the Main menu.
2. Press
for Sounds.
for Tone Length.
3. Press
.
4. Select Long or Short using
and press
Alerts
Your phone will beep from time to time, this beep is called an alert beep. Alert
beeps can easily be turned on or off. This feature offers the following options:
Minute beep, Service, Connect, and Disconnect.
Alerts — Minute beep
You can set the minute beep option to sound an alert 10 seconds before each
elapsed minute to remind you of the length of the current call.
To turn minute beep on or off:
1. In standby mode, press
to display the Main menu.
2. Press
for Sounds.
82
3. Press
for Alerts.
4. In this exercise select the Minute beep option. (For other Alerts
exercises to work correctly, select the appropriate option.)
5. Press the
to choose between On or Off.
6. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Alerts — service
You can set the service alert option to sound an alert when the phone goes in
and out of service coverage areas.
Alerts — connect
With this option set to On, the phone sounds an alert when your call is
connected.
Alerts — disconnect
When this option is set to On, the phone sounds an alert when the phone
experiences a dropped or a failed call.
Note: You can press
a call experiences a failed or dropped call, a text message will display.
Press to clear the prompt and return to standby mode. If the
dropped call was an outgoing call from your phone, you can redial the
number automatically by pressing twice.
to return to the previous menu at any time. When
Roam ringer
When this option is set to On, your phone sounds a unique tone when a call is
received in a network service area. This feature is set to On by default.
To set the Roam Ringer alert on or off:
1. In standby mode, press
to display the Main menu.
2. Press for Sounds.
83
3. Press
for Roam Ringer.
4. Press the
to choose between Normal or Distinctive.
5. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Data/fax
Your phone is capable of sending and receiving digital data and fax calls when
connected to a computing device (laptop, desktop, hand held, palmtop, etc.)
running the Windows or Windows NT operating system. Your phone functions
just like a typical modem on your PC, enabling you to use wireless data
involving a wide variety of Windows software applications.
To use digital data or fax services with your phone, you will need to obtain a
digital data/fax kit from your service provider. This kit will contain the
necessary cables, software, and documentation required for you to connect
and use your phone with your computing device.
To set up Data/Fax calls:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Wireless Web.
for Connection. The Data Mode screen displays.
to select an option. The options are:
Voice Calls Only, Fax One Time, Fax Only, Data One Time, and
Data Only.
5. Press
6. Pressing
to save your option of choice.
returns you to the previous screen.
•
•
Voice Calls Only: No incoming Data/Fax calls can be received.
Fax One Time: Waiting for Fax call. No voice calls can be received for
next 10 minutes.
84
•
•
•
Fax Only: No Voice Calls can be received.
Data One Time: Waiting for data call. No voice calls can be received.
Data Only: No voice calls can be received.
Note: The phone must be on a digital network to receive or send faxes and
data. When you are in a digital network, the
icon is displayed.
Receiving a fax
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Wireless Web.
for Connection.
to highlight Fax Only.
5. Press
to save this option.
In the Fax program on your PC set up Answer Mode. Click on Receive and
select either Automatic Receive (recommended), or Manual Receive. Your
phone is now ready to receive an incoming fax.
Note: Once you have set your phone’s mode to fax for next call, you cannot
receive regular voice calls until you change back to voice calls only, or a fax
is received.
Ending a fax or data call
Some of the normal ways to end a call, like closing the phone, will not end a
fax or data call. Always close the connection through the application on your
computer. Your phone will return to standby mode. Disconnecting the data
cable or turning off your phone will also end a data or fax call, but may disrupt
your computer.
85
Sending a fax or data file
When connected to a computing device, your phone allows wireless fax and
data transmissions. Your computing device software initiates the call to the
destination phone number. Your phone functions as a wireless modem to send
the fax or data file to the number designated by your PC software.
Changing your phone back to voice calling
To change your phone back to voice calling:
1. In standby mode, press
to display the Main menu.
for Wireless Web.
for Connection.
2. Press
3. Press
4. Press
5. Press
to highlight Voice Call Only.
to save this option. The screen displays No incoming Data/
Fax calls can be received.
Games
Your phone’s software allows you to play the following game:
•
Push Push
Note: Games are also available on-line by launching your minibrowser.
Contact your service provider for details.
Key commands
- Press up repeatedly to go up or forward. Press left to go left. Press right
to go right. Press down repeatedly to go backward.
- Press to begin the game.
or
- Press to end the game.
86
Push Push
To open Push Push:
1. Press
2. Press
3. Press
4. Press
.
for Games.
for Push Push.
to start.
Object
The object of the game is to push the balls into the little house. The ball can be
pushed left, right, up, or down. It cannot however, be pushed backwards.
There must always be a space to push the ball forward or else the ball is stuck
and the level cannot be completed. Two balls cannot be pushed together, only
one ball at a time may be pushed. Once the ball has been pushed into the
house, another ball can push the house if another house is located behind it.
Press
to go back one move.
Security
Your phone provides security options, including a user-programmable lock
code and emergency/secret phone number features.
To access the Security menu in standby mode:
1. Press
.
2. Enter the 4-digit lock code (normally the lock code is the last 4-
digits of your phone number).
3. Make your selection from the following options:
•Lock Phone
•Restriction
•Change Lock
•Special #s
87
•Erase PBook
•Reset Phone
Lock phone
Locking the phone limits all outgoing calls except calls to 911 emergency and
the three user-programmable emergency/secret numbers.
You can lock the phone manually during use, or set the phone to lock
automatically when it is turned on. When the phone is in Lock Mode, you can
answer incoming calls, but you must unlock the phone to place outgoing calls
(except to emergency and secret numbers).
Locking the phone
The Security menu allows you to lock the phone manually or automatically
when powering on your phone or to leave the phone unlocked.
To lock the phone:
1. Press
for Security and enter your current lock code.
for Lock Phone.
to select your option.
2. Press
3. Press the
•Unlocked: The phone remains unlocked.
•Lock Now: The phone locks immediately and stays locked until the
lock code is entered.
•On Power-Up: The phone locks automatically the next time your
phone is powered on and stays locked until the lock code is
entered.
4. Press
to save the setting.
88
Unlocking the phone
Enter your phone’s lock code (last four digits of the phone number or 0000),
and the phone is immediately unlocked.
Calling in lock mode
You can place emergency calls using confidential numbers you program in
lock mode.
To place an outgoing call in lock mode:
To call 911 or a confidential number, enter the number and then press
.
Lock code
The default lock code for your phone is generally the last four digits of your
phone number. You can enter a personal lock code and later change the lock
code as often as you like.
To enter a new lock code:
1. Press
2. Press
for Security. Enter your current lock code.
for Change Lock. The screen prompts Lock code. Enter a
new, 4-digit lock code by pressing the keypad. You will be prompted to
Re-Enter. Enter the same 4-digit lock code.
3. Press
to save the new lock code, or press
to exit.
Note: Your phone does not allow viewing of the lock code unless you know
the lock code (this is for obvious security reasons). So, if you change the
lock code, be sure to write down or memorize the new code.
89
Special #s
Your phone provides the option of storing three emergency numbers. Each
number can be up to 32 digits.
All emergency numbers can be manually called at any time even when your
phone is locked or restricted. This can be a useful feature for controlling what
numbers can be called from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
these numbers and press
at any time, even when the phone is locked
or restricted. If you call 911 an audible tone is heard and an Emergency
prompt is displayed during the duration of the call.
Because of various transmission methods, network parameters, and user
settings used to complete a call from your wireless phone, a connection cannot
always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at
all times.
DO NOT depend on this phone as a primary method of calling 911 or
for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate signal
strength before placing a call.
Storing Special #s
To store emergency numbers:
1. Press
2. Press
3. Press
for Security. Enter your current lock code.
for Special #s.
or to select from the three entry openings.
4. Enter the special number. Up to 32 digits can be entered for each
number.
90
5. Press
6. Press
to save the number entered.
to exit and return to the previous menu.
Calling Special #s in lock mode
To call special numbers in lock mode:
1. In standby mode, use the keypad to enter the special number.
2. Press
to place the call.
Erase PBook
Erase PBook erases your Phone Book. Personal settings (the call log,
Messages, Schedules, or other phone feature settings), are unaffected by
clearing the memory on your phone. This feature is useful if you want to give
your phone to a friend or family member, or if you want to erase all of your
phone numbers.
To clear your phone’s memory:
1. Press
2. Press
3. Press
for Security. Enter your current lock code.
for Erase PBook. A confirmation prompt will display.
to clear the phone’s memory, or press
to cancel the
operation.
Note: After a few seconds, a prompt Erased message will display and the
phone will return to standby mode.
91
Resetting your phone
Resetting the phone returns all setup options to the factory default settings.
To reset the phone:
1. Press
2. Press
for Security. Enter your current lock code.
for Reset Phone. A confirmation prompt displays asking if
you want to Proceed.
3. Press to reset the phone or press
to cancel the operation.
Answer mode
With this option activated, your phone will allow you to select a specific answer
mode when you receive an incoming call. Your phone can be preset to answer
when you do any of the following:
•Any key: You can answer the call by pressing any key.
•Flip open: Opening your phone will answer your call.
•Send key: You can answer the phone by pressing
.
To set Answer mode:
1. Press
for Answer mode. The Answer mode
screen displays.
2. Use
to highlight an option.
to save your option.
returns you to the previous screen.
3. Press
4. Pressing
92
Auto answer
With this option activated, your phone will automatically answer calls after the
specified number of seconds. This option is useful when driving. (This function
only works when the handset is connected to the Hands-Free Car Kit.)
If Auto Answer is set to Off the phone will not answer an incoming call. If you
do not answer the call it is automatically stored in the Missed Call log.
To enable Auto Answer:
1. Press
screen displays.
2. Press to highlight one of the available options:
•Yes
•No
3. Press
for Auto Answer. The Auto Answer
to save.
returns you to the previous screen.
4. Pressing
Language
The language option on your phone can change the language of voice prompts,
menus, and key-input.
To change the language:
1. Press
2. Press
3. Press
for Language.
to highlight the language required.
to save.
Note: You can press
to return to the previous menu at any time.
93
Roaming
Roaming on other digital networks
When you’re roaming on other digital networks, your call quality and security
will be similar to the quality you receive when making calls while on your
home network. You may not be able to access certain calling features, such as
Wireless Web.
Roaming on analog networks
When you roam on analog networks, you will experience a similar quality
provided by other analog carriers today. Although some calling features, such
as Wireless Web, may be unavailable, you can still make and receive calls.
You will experience a few differences including:
•
You are more likely to experience static, cross-talk, fade-out and
dropped calls.
•
Some calling features which are standard on your home Network, such
as Call Waiting, Wireless Web and direct international dialing, are
unavailable.
•
•
There are security and privacy risks, such as eavesdropping and cloning,
that exist with conventional analog services today.
Your battery needs recharging sooner when you use your phone for
analog roaming.
Note: If you’re on a call when you leave your home network and enter an area
where roaming is available (whether digital or analog), your call is
dropped. If your call is dropped in an area where you think the service is
available, turn your phone off and on again to reconnect to your home
network.
94
Setting your phone’s roam mode
Your phone allows you to control your ability to roam. By using the Roaming
menu option, you determine which signals your phone accepts.
Set mode
Choose from three different settings on your phone to control your roaming
experience:
1. Press
2. Press
for Network.
for Set Mode. To select an option, scroll to select
Automatic, Home Only, or Analog.
•
•
•
Automatic: This setting seeks automatically the TELUS service. When the
service is unavailable, it searches for an alternative system.
Home Only: This setting allows you to log on to the TELUS network
(both Digital and Analog).
Analog: This setting allows you to select the Analog network for 10
minutes or to use Analog for the first call. After that, the setting reverts
back to the previously set mode.
3. Press
to Save.
4. Set NAM: This setting allows you to associate your mobile identification
number (MIN) to your phone’s electronic serial number (ESN).
Setting an alert when roam charges apply (call
guard)
In addition to the roaming icon, Call Guard alerts you when roaming charges
apply. This feature makes it easy to manage your roaming charges by
reminding you when you make or receive roaming calls. It also requires you to
take additional steps before placing or answering a roaming call. These
additional steps are not required when you make or receive calls while on your
network.
95
To turn the Call Guard feature on or off:
1. Press for Call Guard. Wait briefly until a
message prompt displays and then disappears from the display screen.
2. Select Yes or No, and press
.
•
If the Yes option is chosen, an extra step is required to make or take
roaming calls.
•
If the No option is chosen, no extra step is required to make or take
roaming calls.
To place roaming calls with Call Guard on:
1. From Standby mode, enter 1 + area code + the seven-digit number. You
can also initiate a call from the internal Phone Book, Call History or Web
Messages.
2. Press
3. Press
. A message is displayed indicating that roaming rate applies.
to place the call.
To Answer incoming roaming calls with Call Guard on:
Remember if the Call Guard feature is set to On, you need to take extra steps to
make and receive roaming calls.
Note: The time and date are set automatically by the network. If you are
outside your coverage area and are in analog mode, the time and date are
not automatically updated.
96
Setting ringer for roaming calls
You can select a distinctive ringer type for incoming roaming calls.
1. Press
2. Press the navigation keys to choose Distinctive or Normal.
3. Press
for Roam Ringer.
.
In-use menu
Your phone includes both a standby menu and an In-Use menu. The In-Use
menu is displayed by pressing
while the phone is being used during a call.
The In-Use menu options are:
•
Mute - Mutes or (Un)mutes your end of a phone conversation so that the
recipient can hear nothing.
•
Calls - Checks your call log for outgoing, incoming, and missed calls.
You can also erase the logs from this menu.
•
•
•
•
•
Phone Book - Accesses the Phone Book menu options.
3-way call - Allows you to call a third person while on a call.
Messages - Accesses the Mail Kit menu options.
Tools - Accesses the Tools menu options.
Version - Displays the version of the software and hardware that is being
used on the phone.
97
Usage guidelines:
all about performance and safety
Understanding Signal Strength
The quality of each call you make or receive, is dependent upon the signal
strength in your area. Your phone informs you of the current signal strength by
displaying a icon. The more bars displayed, the stronger the signal. The signal
strength indicator (
) displays in the upper left corner of your display
screen. The voice quality of your phone is always clearest when the antenna is
fully raised. If you’re inside a building, reception may be better near a window.
Understanding the Power Save Mode
If you are trying to use your phone in an area where the signal is too weak, the
Power Save feature automatically activates to conserve battery power when you
have been unable to pick up a signal for 15 minutes. If your phone is on, it
periodically rechecks service availability. To manually check, press any key. A
message is displayed on the screen any time you activate Power Save. When a
signal is found, your phone returns to standby mode.
Understanding how Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it is turned on,
it receives and transmits radio frequency (RF) signals. When your phone is in
use, the system handling your call controls the power level. This power can
range from 0.006 watts to 0.2 watts in digital mode.
Specifications are Subject to Change
The information contained in this manual is believed to be correct at the time
of printing, however, Samsung reserves the right to change or modify any of the
specifications without notice or obligation to update existing units.
98
Exposure To Radio Frequency Signals
Your wireless handheld portable telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also transmits radio frequency (RF)
signals
In August, 1996. the Federal Communications Commission (FCC) adopted RF
exposure guidelines with safety levels for hand-held wireless phones. Those
guidelines are consistent with the safety standards previously set by both U.S.
and international standards bodies:
•
•
•
ANSI C95.1 (1992)
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of the
relevant scientific literature. For example, over 120 scientists, engineers, and
physicians from universities, government health agencies, and industry
reviewed the available body of research to develop the ANSI standard (C95.1).
The design of your phone complies with the FCC guidelines (and those
standards).
Body-worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use a Samsung supplied or approved carrying case,
holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure the antenna is at least one inch (2.5 centimeters) from your
body when transmitting. Use of non-Samsung approved accessories may violate
FCC RF exposure guidelines.
99
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and may
violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other telephone with the
antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
•
•
Extend your antenna fully.
Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
Operating a Motor Vehicle
Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving,
please:
•
•
Give full attention to driving - driving safely is your first responsibility.
Use hands free operation, if available.
Electronic Devices
Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against the RF signals from
your wireless phone.
100
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
•
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential for
interference;
•
If you have any reason to suspect that interference is taking place, turn
your phone OFF immediately.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
Turn your phone Off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that you add to your vehicle.
101
Posted Facilities
Turn your phone Off in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch Off your
phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone Off when in a
“blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and
instructions.
Potentially Explosive Atmospheres
Turn your phone Off when in any area with a potential explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always clearly
marked. They include fueling areas such as gasoline stations; below deck on
boats; fuel or chemical transfers or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains
chemicals or particles, such as grain, dust, or metal powders; any other area
where you would normally be advised to turn Off your vehicle engine.
For Vehicles Equipped with an Air bag
An air bag inflates with tremendous force. DO NOT place objects, including
both installed or portable wireless equipment, in the area over the air bag or in
the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
102
Storing your phone
You must not store or carry your phone, its parts, or accessories in the same
compartment or other area where there flammable liquids, gases, or explosive
or flammable materials.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment and void your authority
to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of hardware and can
be broken. Use common-sense guidelines to avoid dropping, hitting, bending,
or sitting on it.
103
Your Phone as a Network Device
Your telephone requires a service provider to send and receive calls. Your
phone is only one part of a system or “network” of devices that makes it
possible for you to send and receive calls, text messages, voice message, access
the Internet using the minibrowser, and to take advantage of all of the other
services and features available when your phone is used with your service
provider.
Your phone will always try your call using your home system, but if this is
unavailable, then the phone will use the preferred roaming system.
If you cannot roam, your call will not be connected and the
icon is
displayed. In some service areas, an operator may come on the line asking you
how you would like to pay for the call.
To make all of the features available to you, your phone is designed by
Samsung and your service provider to allow your service provider to send (at
any time) a variety or information and messages to your phone. You may think
of this as an over the air service to your phone. During an over-the-air
programming session, your phone may display the following messages:
•
“Search... Download” - this message means the phone is looking for the
data to download.
•
“Progress Download” - this message means the phone is downloading
data. Do not turn your phone off while this is occurring. See the
CAUTION below.
•
•
“Download Success” - this message means that your phone has been
successfully reprogrammed. You can now continue to use your phone as
you normally do.
“Download Failed” - if this message appears contact your service
provider.
104
CAUTION: If you turn off your phone during a download, your phone (or
some features) may not work properly in the network. If this happens don’t
worry, contact your service provider for help in correcting the problem.
Acknowledging Special Precautions
and Industry Canada Notice
Only use approved batteries, antennas, and chargers. The use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of hardware and can
be broken. Use common-sense guidelines to avoid dropping, hitting, bending
or sitting on it.
Information to User
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient / relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit difference from that to
which the receiver is connected.
105
•
Consult the dealer or an experienced radio/TV technician for help.
Samsung Phone and Battery Specifications
Dual Band/Tri Mode:CDMA 1.9GHz / CDMA 800 MHz/AMPS 800 MHz
Display Screen:Graphical LCD up to 5 lines w/1 dedicated Icon Line)
Battery Type:Standard: Lithium-Ion
PCS Antenna:Retractable, user-replaceable
Owner's Record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about your
phone in the future.
Model:
Serial No.:
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more
of the following Patents:
4,901,3075,109,3905,267,2625,416,797
5,506,8655,544,1965,657,4205,101,501
5,267,2615,414,7965,504,7735,535,239
5,600,7545,778,338 5,228,054 5,337,338
5,710,7845,056,109 5,568,4835,659,569
5,490,1655,511,073
®
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
106
Licensed by Qualcomm Incorporated under one or more of the following
patents: U.S. Patent No. 4,901,307; 5,056,109; 5,099,204; 5,101,501;
5,103,459; 5,107,225; 5,109,390.
®
Openwave is a registered Trademark of Openwave, Inc.
107
Limited Warranty
1. What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants the original (“Purchaser”) that SAMSUNG’s phones and
accessories (“Products”) are free from defects in material and
workmanship under normal use and service for a period commencing
on the date of purchase and continuing for the specified period of time
after the date:
•Phone - 1 year
•Batteries - 1 year
•Other Phone Accessories - 1 year
2. What is Not Covered?
The limited warranty is conditioned upon proper use of Product by
Purchaser. This limited warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical,
electrical, or electromechanical stress, modifications of any part of the
Product, including antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or damaged due to
normal usage; (d) malfunctions resulting from the use of Product in
conjunction with the accessories, products, ancillary, or peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of product, or (g)
Product used or purchased outside the United States or Canada. This
Limited Warranty covers batteries only if the battery falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not
cover any battery if (i) the battery has been charged by a battery charger
not specified or approved by SAMSUNG for charging the battery, (ii) any
108
of the seals on the battery are broken or show evidence of tampering, or
(iii) the battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
3. What are SAMSUNG’s Obligations?
During the applicable warranty period, SAMSUNG will repair or replace
at SAMSUNG’s sole option, without charge to purchaser, any defective
component part of the phone or accessory. To obtain service under this
limited warranty, purchaser must return Product to an authorized phone
service facility in an adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable proof of sale showing the date of
purchase, the serial number of Product, and the seller’s name and
address. To obtain information on where to deliver the phone or
accessory, call your service provider or Samsung Customer Care at (888)
987-4357. Upon receipt, SAMSUNG will promptly repair the defective
product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any product
or replace a product with a rebuilt, reconditioned, or new product.
Repaired products will be warranted for a period equal to the remainder
of the original limited warranty on the original product or for 90 days,
whatever is longer. All replaced parts, components, boards, and
equipment becomes the property of SAMSUNG. If SAMSUNG determines
that any product is not covered by this limited warranty, purchaser must
pay all parts, shipping, and labor charges for the repair or return of said
product.
4. What Are the Limits On SAMSUNG’s Liability?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF
109
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING
BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED
TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS
THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMULAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NELIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT
110
AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTENT TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,
SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUCTED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THE PURCHASER MAY USE THIRD-PARTY
SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE
QUALITY, CAPABILITIES OPERATIONS, PERFORMANCE AND SUITABILITY OF
ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of risk and
111
the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional warranties binding
on SAMSUNG. Accordingly, additional statements such as dealer advertising or
presentation, whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, Inc.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2002 Samsung Telecommunications America, Inc. All rights reserved. No
reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
112
Index
A
B
C
D
E
G
I
K
L
M
N
O
P
R
Roaming
S
T
|
