Instructions
■ Thank you for purchasing this digital
Olympus camera.
■ Before you use this camera, read this
manual carefully.
■ We recommend that you spend some time
taking test shots and experimenting with
all of the features before you take
important pictures.
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan.
(Customer support) Tel. 0426-42-7499
http://www.olympus.co.jp
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
(Customer support) Tel. 1-888-553-4448
http://www.olympus.com
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
http://www.olympus-europa.com
Printed in Japan
VT1621-01
Features, How to Use This Manual
IMPORTANT SAFETY INSTRUCTIONS
Caring for Your Camera, Important Parts and Names
Read This First!
Follow these step-by-step instructions to set
up the camera and take some pictures.You
can start taking pictures right away, even if
you are a beginner, using zoom, macro mode
for close-ups, flash shooting, etc.
1
2
Getting Started
Taking Pictures
(Shooting and Viewing Basics)
Read based on the types of
pictures that you want to take.
Shooting Techniques:
General Introduction
3
4
Distance and Focus
Brightness (Exposure)
5
Taking Pictures
Read for more details about adjusting
camera settings manually if the results
with the automatic features are not
satisfactory, or to create special artistic
effects in your pictures.
6
Using a Flash
7
Color and Quality
8
Special Features
Playing back pictures for viewing on the
camera monitor or processing pictures
with the camera features.
9
Playing Back Images for Viewing
Managing Stored Pictures
Selecting Pictures for Printing
10
11
12
13
Preparing pictures for printing,
transferring pictures from memory card
to a computer.
Transferring Pictures to a Computer
Monitor Menus
Having a problem?
Appendices*, Glossary, Index
Basics for Everyone
Advanced Features
* Specifications/Available
Options/Image File
Compatibility/Troubleshooting/
Camera Error Messages
CAMEDIA E-10 Fe a ture s
Here is a quick summary of this camera’s most exciting features for professional
photographers, publishers, advertisers, or anyone experienced with an SLR camera who
wants to make the transition to a digital camera.
High Quality Images
• High Quality CCD with approximately 4 million elements.
• 4x zoom with f/2.0~f/2.4 ED lens, aspherical lens, fully multi-coated lenses. Reliable
reproduction of beautiful, natural color.
• Highly acclaimed balance achieved with digital ESP metering, spot metering, and
center weighted averaging metering, and a dual autofocusing system to cover low light
and low contrast situations.
Functionality
• Approx. 60ms shutter release timing*; sequence shooting at 3 frames/sec (up to 4
frames).
• Even in the macro close-up mode, you can zoom on an area up to 20 cm (8 inches)
from the lens of the camera.
• A wide choice of 5 different battery types.
• Durable, aluminum die-cast body.
• Compatible with SmartMedia, CompactFlash. (Compatible with Type I, Type II. Micro
drive cannot be used.)
* Shutter release time after focus lock and full-press on the shutter button.
Operability
• Easy to use button layout allows easy settings and adjustments.
• Viewfinder with a focusing screen which allows you to confirm focusing in real time.
• Manual focusing for fine adjustment with a focusing ring.
• Shutter speed, aperture value, other image information displayed in viewfinder.
• Monitor allows waist-level view for composing pictures.
Expandability
• Complete conversion lens system.
• Optional power battery holder kit enables prolonged uninterrupted use.
• Remote cable with 2-step release, 1st half-press and then 2nd full-press.
• Synchro socket for a non-dedicated external flash unit, hot shoe for a generic or
dedicated external flash unit.
• Allows easy connectivity to a computer with a USB interface.
2
How to Use This Ma nua l
The sample page below shows you how the use this manual.
Procedures
Follow the numbered
procedures. The numbers
Move the mode
dial to align the
mark with
.
in the illustrations on the left
correspond to the step
numbers on the right.
Mode Dial Setting
Tells you the possible
mode dial settings
required to follow the
procedure.
OFF
ON
Setting Tables
Initial settings
(defaults) are
P (Program mode)
Camera automatically selects
the best aperture value and
shutter speed for the shot.
indicated in bold.
Se le c ting Sha rp ne ss
Tettings are available for adjusting sharpness: HARD, NORMAL, and OFT. SHARP sharpens
the contat color borders to maximize the clarity of the image.
NORMAL bled when you purchase the camera. Defines borders to hieve best focus fo
printinhe image.
A (Aperture priority mode)
Allows you to set the aperture
value (camera selects the shutter
speed).
Indicates the
corresponding
step number of
the procedure on
the right.
HARD
SOFT
Greatly enhnces and sharpens borders.
Softens borders sghtly and is ideal for images that you inteto process with
computer graphics software application.
a
OFF
AUTO
5sec
Preous shot is not displayed.
Preious shot is displayed for as long
as takes for the image to be stored
on he memory card.
1
Pevious shot is displayed for
5
seconds.
S (Shutter priority mode)
Allows you to set the shutter
speed (camera selects the
aperture value).
Press the menu button
.
1
2
3
The menu opens in the monitor.
On the arrow pad, press
the green highlight to the sharp option mark
.
or
to move
2
Using the Menus
To open the next
page of a menu in
the direction
On the arrow pad, press
green highlight to HARD, NORMAL, or
SOFT.
to move the
The mark is displayed in the control panel
7
when
a
setting other than NORMAL is
selected.
M (Manual mode)
Allows you to set both the shutter
speed and aperture value.
Press the
button to select the setting.
4
The green highlight returns to the sharp option
mark
Press
.
3
button again to close the menu.
indicated by the
Note
arrows
,
•
Selecting HARD could cause the image to appear
rough.
(Playback mode)
Allows you to display on the
monitor images of pictures you
have taken.
press the
appropriate
pointer on the
arrow pad
4
137
to
move the
When shooting mode is set for P,
A, S, or M, rapidly press
(Monitor button) twice to enter the
playback mode.
highlighted green
frame in order to
perform settings.
(Print reserve mode)
Arrow pad
Cautions and
Notes provided
Allows you to select images for
printing on a DPOF printer or by a
DPOF printing service.
Press the black
pointer. If more than
one pointer is
marked in black,
press either pointer.
at bottom of the
page describe
precautions and
tips about using
the camera.
(Setup/connection mode)
Select this setting before you
connect the camera to a computer.
Also displays the camera setup
features after you press the menu
button
.
This is only a sample, not a real page. Please do not attempt to execute the procedure described on
this page.
3
IMPORTANT SAFETY INSTRUCTlONS
Before you use this camera, read this manual
and then store it in a safe location where you
can find it for future use.
We recommend that you spend some time
taking test shots and experimenting with all of
the features before you take important
photographs.
8. Location - To avoid damage to the product
and to avoid personal injury, never place this
product on a unstable stand, tripod, bracket,
table or cart. Mount only on a stable tripod,
stand, or bracket. Follow the instructions
which describe how to safely mount the
product, and use only the mounting devices
recommended by the manufacturer.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
9. Power Sources - Connect this product only
to the power source described on the
product label. If you are not sure about the
type of power supply in your home, consult
your local power company. Refer to your
operating instructions for information on
using the product with batteries.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
A lighting flash with an arrowhead,enclosed in a triangle, alerts
you to the presence of uninsulated voltage points inside the
product which could cause a serious electrical shock.
10.Grounding, Polarization - If this product can
be used with an optional AC adapter, the
adapter may be equipped with a polarized
alternating current line plug, a plug with one
blade wider than the other. This safety
feature allows the plug to fit into the power
outlet only one way. If you cannot insert the
plug into the wall outlet, pull it out, reverse
it, and then insert it again. If the plug still
fails to fit, contact an electrician and have
the receptacle replaced.
An exclamation point enclosed in a triangle alerts you to important
operating and maintenance instructions in the documentation
provided with the product.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE
THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
1. Read All Instructions - Before you use the
product, read all operating instructions.
2. Save These Instructions - Save all safety
and operating instructions for future
reference.
11.Protecting the Power Cord - The power
supply cord should be routed so it will not
be walked on. Never place a heavy object
on the power cord and never wrap the
3. Heed Warnings - Read carefully and follow
all warning labels on the product and all
warnings described in the instructions.
power cord around the leg of a table or
chair. Keep the areas around the power cord
connection points, at the power outlet and at
the product connection, free of all obstacles.
4. Follow Instructions - Follow all instructions
provided with this product.
5. Cleaning - Always unplug this product from
the wall outlet before cleaning. Use only a
damp cloth for cleaning. Never use any type
of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
12.Lightning - If a lightning storm occurs while
using the optional AC adapter, unplug the
adapter power cord from the wall outlet
immediately. To avoid damage from
unexpected power surges, always unplug
the AC adapter from the power outlet and
disconnect it from the camera when the
camera is not in use.
6. Attachments - For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
7. Water and Moisture - Never use this product
around water (near a bathtub, kitchen sink,
laundry tub, wet basement, or swimming
pool).
13.Overloading - Never overload wall outlets,
extension cords, power strip, or other power
connection points with too many plugs.
4
14.Foreign Objects, Spillage - To avoid
personal injury from fire or electrical shock
from contact with internal high voltage
points, never insert a metal object into the
product. Avoid using the product where
there is a danger of spillage.
WARNING!
• Keep batteries away from children.
• If a child swallows a battery, seek medical
attention immediately.
• Dispose of lithium batteries promptly and
safely in compliance with local laws
regarding the disposal of such items.
• To avoid causing a fire or minor burns,
always handle lithium batteries carefully.
• Never attempt to charge the lithium
battery, disassemble it, heat it above
212°F (100°C) or incinerate it.
• To ensure good contact, wipe the battery
with a clean, dry cloth before use.
• To avoid short circuiting the +/-sides of the
battery, never handle a lithium battery with
a metal tool, tweezers, etc.
15.Servicing - Refer all servicing to qualified
personnel. Attempting to remove the covers
or disassemble the product could expose
you to dangerous high voltage points.
16.Damage Requiring Service - While using the
optional AC adapter, if you notice any of the
conditions described below, unplug the AC
adapter from the wall outlet and refer
servicing to qualified service personnel:
a) If liquid has been spilled, or any object
has fallen into the product.
b) If the product has been exposed to water.
c) If the product does not operate normally
while following operating instructions. Adjust
only the controls described in the operating
instructions as improper adjustment of other
controls could damage the product,
requiring extensive repair work by a
qualified technician to restore the product to
normal operation.
The DANGER indication alerts you to an
imminent hazard that if not avoided could
result in death or serious injury.
Danger
The WARNING indication alerts you to a
potential hazard that if not avoided may
result in death or serious injury.
Warning
Caution
The CAUTION indication alerts you to a
potential hazard that if not avoided may result
in injury or in property or equipment damage.
d) If the product has been dropped or
damaged in any way.
e) If the product exhibits a distinct change in
performance, this indicates a need for
servicing.
Handling Batteries
Follow these important guidelines to prevent
the batteries from leaking, overheating,
burning, exploding, or causing electrical shock
or burns.
17.Replacement Parts - When replacement
parts are required, make sure that the
service center uses only parts
recommended by the manufacturer to
ensure that the replacement parts have the
same characteristics as the originals.
Unauthorized substitution of parts could
cause a fire, electrical shock, or create other
hazards.
DANGER
1. If you use Ni-MH batteries, use only
Olympus Ni-MH batteries and the
recharging unit recommended for use with
these batteries.
2. Never load batteries with their +/− terminals
reversed. Never force batteries into the
battery compartment.
3. To prevent causing battery leaks or
damaging their terminals, carefully follow all
instructions regarding the use of batteries.
Never attempt to disassemble a battery or
modify it in any way, with soldering, etc.
4. Take precautions when carrying or storing
batteries to prevent them from coming into
contact with any metal objects like jewelry,
pins, fasteners, etc.
18.Safety Check - Upon completion of servicing
or repairs, ask the service technician to
perform safety checks to determine that the
product is in good working condition.
19.Heat - Never use or store this product near
a heat source such as a radiator, heat
register, stove, or any type of equipment or
appliance which generates heat, including
stereo amplifiers.
5
IMPORTANT SAFETY INSTRUCTlONS (continued)
5. Never heat batteries or incinerate them.
6. Never attempt to connect a battery directly
to a power outlet, or to a cigarette lighter in
a vehicle.
7. If battery fluid gets into your eyes, flush your
eyes immediately with clear, cold running
water and seek medical attention
immediately.
6. If a battery leaks fluid onto your clothing or
skin, remove the clothing and flush the
affected area with clean, running cold water
immediately. If the fluid burns your skin,
seek medical attention immediately.
7. Never attempt to modify the battery
compartment on the camera, and never
insert anything (other than the
recommended battery) into the battery
compartment.
WARNING
1. Keep batteries dry at all times. Never allow
them to come into contact with fresh water
or salt water.
2. To prevent batteries from leaking,
overheating, or causing a fire or explosion:
• Use only batteries recommended for use
with this product.
CAUTION
1. Olympus Ni-MH batteries are intended for
use only with Olympus digital cameras.
Never use these batteries with any other
device.
2. Never subject batteries to strong shocks or
continuous vibration.
3. Always charge sets of batteries (2 or 4)
together.
4. Always charge Ni-MH batteries before using
them for the first time, or if they have not
been used for a long period.
• Never heat batteries, incinerate them, or
attempt to disassemble them.
• Never mix batteries (old and new batteries,
charged and uncharged batteries,
batteries of different manufacture or
capacity, etc.).
• Never attempt to charge alkaline or lithium
batteries.
• Load batteries carefully as described in
the operating instructions. Never reverse
their polarity when loading.
5. While the camera is not in use, always
remove the batteries to prevent accidental
leakage which could damage the battery
compartment.
6. If a battery leaks, becomes discolored or
deformed, or in any other way becomes
abnormal during operation, stop using the
camera and consult your dealer or an
authorized Olympus service center.
Continued use may result in fire or electric
shock.
7. Never store batteries where they will be
exposed to direct sunlight, or subjected to
high temperatures in a hot vehicle, near a
heat source, etc.
8. Batteries may become hot during prolonged
use. To avoid minor burns, never remove
them immediately after using the camera.
• Batteries with any part of the outer seal
(magnetic insulation sheath) peeling off, or
any battery split along the seam, can leak,
generate heat, or explode.
• To prevent a fire or minor burns, inspect
batteries carefully before loading. Never
load a battery if you notice that the
insulation or protective covering is
damaged in any way or if the battery cover
is warped, even if the batteries are new.
Batteries sold at stores may have these
kinds of abnormalities. Never use these
batteries.
3. If Ni-MH batteries are not charged within the
specified time, stop charging them and do
not use them.
4. Before loading, always inspect batteries
carefully for leaks, discoloration, warping, or
any other abnormality.
5. Always store batteries out of the reach of
small children. If a child accidentally
swallows a battery, seek medical attention
immediately.
Handling the Camera
WARNING
1. Use caution when taking flash pictures at
close range. When you fire the flash, you
must be at least 3 ft. away from the faces of
your subjects, especially when taking
pictures of infants and small children. Firing
the flash too close to the subject’s eyes
could cause a momentary loss of vision.
6
2. To avoid damaging your eyes, never aim the
camera directly into the sun, or any other
extremely bright light source.
3. To avoid causing a fire or explosion, never
use the camera in near flammable or
explosive gases.
4. Always use and store the camera out of the
reach of young children and infants to
prevent the following dangerous situations
which could cause serious injury:
• Becoming entangled in the camera strap,
causing strangulation.
Camera Care and Storage
Handling
• Never store or use the camera for long
periods in locations subject to direct sunlight,
high humidity, extreme variation in
temperature, or strong shocks and constant
vibration. Protect the camera at all times from
dust and sand.
• Never store the camera near any type of
appliance or equipment which generates high
temperatures, low temperatures, high or low
humidity, or a strong magnetic field. Never
use the camera in a factory or laboratory
where flammable gases are present.
• Never shake the camera or subject it to shock
or strong vibration.
• To avoid damaging its precision lens, never
leave the camera pointing directly into the
sun.
• Before storing the camera for a long period,
remove the batteries. Select a cool, dry
location for storage to prevent condensation
or mold from forming inside the camera. After
storage, test the camera by pressing the
shutter button to make sure that it is operating
normally.
• Accidentally swallowing a battery or small
part.
• Accidentally firing the flash into their own
eyes or into the eyes of another child.
5. To avoid the hazards of fire or electrical
shock, store the camera in a cool, dry
location where it will not be subjected to
high humidity or dust.
6. To avoid minor burns, never cover the flash
with your hand when it is fired. Never touch
the flash unit after continuous use. The flash
unit becomes very hot during continuous
operation.
7. If the camera is accidentally dropped in
water, or if liquid is spilled into the camera,
stop using the camera, allow the camera to
dry, and then remove the batteries. Contact
the nearest Olympus authorized service
center.
• When the camera is mounted on a tripod,
adjust the tripod head to re-position the
camera; do not twist the camera.
• Never touch the flash after it has been fired.
Avoid using the flash for extended periods.
Allow it to cool occasionally between shots.
• To avoid injury from electrical shock, never
attempt to disassemble or modify the camera
in any way.
CAUTION
1. During operation of the camera, if you notice
any unusual odors, noise, or smoke around
the camera, immediately switch the camera
off, disconnect the optional AC adapter (if it
is connected), and allow the camera to sit
idle for a few minutes to allow it time to cool.
Take the camera outdoors, away from
flammable objects, and carefully remove the
batteries to avoid burning your hands.
Contact the nearest Olympus service center
immediately.
CAUTION
Selecting batteries for your camera
• This camera can use four AA Ni-MH batteries,
four AA alkaline batteries, four AA lithium
batteries, four AA Ni-Cd batteries, or two CR-
V3 lithium battery packs. Use of Olympus
brand batteries is strongly recommended.
• Alkaline battery performance is limited,
especially at low temperatures. Using Ni-MH
batteries is recommended.
2. Never attempt to disassemble the camera.
The internal circuits contain high voltage
points which could cause serious burns or
electrical shock.
• AA manganese batteries cannot be used with
this camera.
3. To avoid dangerous electrical shock, never
hold or operate the camera with wet hands.
4. To avoid damaging the camera or causing a
fire, never expose the camera to excessive
heat.
• Always follow the battery recommendations
and loading instructions. Incorrectly loading
the batteries could cause the batteries to leak
or overheating.
7
IMPORTANT SAFETY INSTRUCTlONS (continued)
• When using the camera on battery power at
low temperatures, try to keep the camera and
extra batteries as warm as possible. Batteries
which run down at low temperatures may be
restored after they are warmed at ambient
temperature.
• Perspiration or oil from your hands on the
battery contacts could prevent them from
operating. Before loading batteries, wipe the
terminals with a dry, clean cloth.
• Before going on a long trip, especially before
traveling abroad, purchase an ample supply
of extra batteries. The recommended batteries
may be difficult to obtain while traveling.
• Always recharge Ni-MH or Ni-Cd batteries
with a charger recommended for use with
these batteries.
• Before using Ni-MH or Ni-Cd batteries, always
read the instructions provided with purchase
of these batteries.
• To avoid personal injury or damage to the
camera, always inspect batteries before
loading. If you notice leaking, damage to the
battery cover or insulation, discoloration,
warping or any other abnormality do not use
the batteries.
• Recommended temperature ranges for Ni-MH
batteries:
Operation 32°~104°F
• If you use Ni-Cd batteries, make sure that you
always fully charge 4 batteries at a time on a
recharge unit rated for use with Ni-Cd
batteries. If you do not use Ni-MH batteries
for about 1 month, you may not be able to
restore them to full power with one full
recharge.You may need to recharge them
several times to restore them to full power.
Monitor and control panel light
• The fluorescent lamp of the monitor and
control panel has a long but limited service
life. If either display becomes dark or begins
to flicker, contact an Olympus authorized
service center.
• At low temperatures, the light could be slow
to light and the color could be different. When
using the camera in cold weather, try to keep
it as warm as possible. If you notice changes,
normal operation will be restored after the
camera is returned to a warm location.
• The monitor of this camera is a high precision
device. However, you may occasionally notice
residual display of frequently displayed
images, and the color and brightness of the
display could change with the angle of view.
These phenomena do not indicate problems,
but could occur with normal operation of the
monitor.
Charge 32°~104°F
Storage −4°~86°F
• Using, charging, or storing the batteries
outside these ranges could shorten battery
life or affect battery performance. Always
unload the batteries from the camera before
storing the camera and batteries for a long
period.
• Alkaline battery performance is limited by a
number of factors: manufacturer, date of
manufacture, warranty period, low
temperatures. Battery service could be
shortened by any of these factors. Generally
alkaline batteries perform poorly at low
temperature.
• Ni-MH batteries are rechargeable but
chemical reactions could cause the battery
capacity to deteriorate. The batteries can be
recharged up to approximately 300 times,
depending on operating conditions.
8
Ca ring for Your Ca m e ra
Lens
• Purchase a standard camera lens blow brush and use it to keep the lens clean.
• To remove more difficult dust or foreign matter, use only a cleaning cloth or paper
intended for use with camera lenses to prevent scratching the lens.
• When the camera is not in use, cover the lens with the lens cover to protect it
from scratches or other accidental damage.
Monitor
• Use only a cleaning cloth or paper intended for
LCDs to clean the monitor.
General care tips
* Always protect the surface of the camera from water.
* Never store the camera with mothballs.
* Store the camera in a clean, dry, cool location that is not subject to wide variation in temperature
or humidity.
* If you store the camera for more than one month with the batteries removed, the date and time
settings will return to its factory default. This means that you will need to reset the date and time
the next time you use the camera.
* After prolonged storage check the camera to make sure that it is operating correctly. (The growth
of mold, excessive dust, etc. could interfere with operation of the camera.)
* To prevent sand or dirt from interfering with the movements of the manual focusing ring and other
moving parts, keep the camera stored in a case or bag when it is not in use. Avoid using the
camera in areas exposed to sand and dust.
9
Conte nts
CAMEDIA E-10 Features ................................................................................................... 2
How to Use This Manual .................................................................................................... 3
IMPORTANT SAFETY INSTRUCTlONS ............................................................................ 4
Caring for Your Camera ...................................................................................................... 9
Important Parts and Names ............................................................................................. 14
Getting Started .................................................................................................19
Box Contents: Make Sure You Have Everything ......................................................... 20
Attaching the Camera Strap ....................................................................................... 21
Inserting Batteries and Attaching the Optional AC Adapter ....................................... 22
Taking Pictures (Shooting and Viewing Basics) ........................................... 29
Inserting a Memory Card............................................................................................ 30
Setting the Shooting Mode and Switching the Camera On ........................................ 32
Checking the Battery .................................................................................................. 33
Checking the Number of Storable Pictures ................................................................ 34
When the Number of Storable Pictures Is Not Displayed ........................................... 35
Holding the Camera ................................................................................................... 36
Pushing the Shutter Button ........................................................................................ 38
If You Cannot Take a Picture ....................................................................................... 40
Enlarging the Subject (Zoom and Macro)................................................................... 42
Using the Built-in Flash .............................................................................................. 44
Viewing Pictures (Playback) ....................................................................................... 46
Protecting Pictures
............................................................................................ 50
...................................................................................... 51
Deleting Single Pictures
Switching the Camera Off .......................................................................................... 52
Shooting Techniques: General Introduction ..................................................53
Shooting Portraits (Focused Subject, Blurred Background) ....................................... 54
Shooting Portraits (Shooting Backlit Subjects) ........................................................... 55
Shooting a Subject in Daylight Shadow (Daylight Synchro) ....................................... 56
Shooting the Subject and Background Both in Focus ................................................ 57
Shooting Moving Subjects .......................................................................................... 58
Shooting Close-up ...................................................................................................... 59
Shooting Night Scenes ............................................................................................... 60
10
Shooting a Subject Against a Night Scene Background (Slow Synchronization) ....... 61
Shooting Sunsets and Fireworks ................................................................................ 62
Taking Pictures: Distance and Focus.............................................................63
Using Autofocus (AF) ................................................................................................. 64
Using Manual Focus (MF) .......................................................................................... 68
Taking Pictures: Brightness (Exposure) (Aperture and Shutter Speed) .......... 69
Setting the Shooting Mode ......................................................................................... 70
Aperture Values and Shutter Speeds Selected Automatically in the P Mode............. 71
Setting the Aperture Value.......................................................................................... 72
Setting the Shutter Speed .......................................................................................... 74
Selecting Aperture and Shutter Speed Manually ....................................................... 76
Selecting the Metering Method
Using Exposure Compensation
............................................................ 78
............................................................................. 79
AE Lock
Bracketing a Shot with Three Automatic Exposures
Changing the ISO Setting ..................................................................................... 83
............................................................................................................ 80
............................................. 81
Taking Pictures: Using a Flash .......................................................................85
Selecting a Flash Mode
......................................................................................... 86
...................................................................... 90
Using Flash Control Compensation
Using the Optional Dedicated External Flash FL-40 .................................................. 92
Using Other Flash Units with the Camera .................................................................. 94
Taking Pictures: Color and Quality.................................................................97
Achieving Natural Color (White Balance)
Using White Balance .......................................................................................... 100
Using Quick Reference White Balance .............................................................. 101
Using Preset White Balance .............................................................................. 102
Selecting Image Quality, Resolution, and Compression ... 103
............................................................ 98
Selecting Sharpness
Selecting the Contrast
Displaying the Histogram
.......................................................................................... 106
........................................................................................ 107
.................................................................................... 108
Taking Pictures: Special Features ................................................................111
Taking Multiple Exposures
................................................................................. 112
Using the Self-Timer ........................................................................................... 113
Using the Camera Remote Unit RM-1 ................................................................... 114
Using the Remote Cable RM-CB1 (Optional) ........................................................... 116
11
Contents (continued)
Using Time-Lapse Photography
......................................................................... 118
.......................................................... 121
Selecting a Card for Storing Pictures
Selecting the Shutter Sound Type and Volume
.................................................. 122
Setting the Warning Sound
Setting the Rec View Time
Setting the Date and Time
................................................................................. 124
................................................................................. 125
.................................................................................. 126
Setting the Idle Time for the Sleep Mode
Restoring All Default Settings
RAW Data Mode
Using an Optional Conversion Lens
........................................................... 128
+
..................................................................... 130
................................................................................................. 131
.............................................................. 133
Playing Back Images for Viewing .................................................................137
Displaying Image Information
............................................................................ 138
....................................................................... 140
Automatic Playback (Slide Show)
Displaying Images on a TV Screen .......................................................................... 142
Adjusting Monitor Brightness .............................................................................. 144
Managing Stored Pictures .............................................................................145
Copying Images to Another Card
Deleting All Images ............................................................................................ 150
Formatting a Memory Card ................................................................................ 152
Naming Image Files ........................................................................................... 154
....................................................................... 146
Selecting Pictures for Printing......................................................................157
Selecting Pictures and Number of Copies for Printing ......................................... 158
Selecting All Pictures on a Card for Printing
Setting Up Index Printing .................................................................................... 162
Selecting Pictures for Date or Time Stamping .................................................... 164
...................................................... 160
Printing with Olympus Printers ................................................................................. 166
Transferring Pictures to a Computer............................................................167
Transferring Images with a Computer Connection Kit .............................................. 168
Optional Devices for Card Reading .......................................................................... 172
Monitor Menus................................................................................................173
Monitor Menus
.................................................................................................... 174
Appendices.....................................................................................................177
Appendix 1: Specifications ....................................................................................... 178
Appendix 2: Available Options .................................................................................. 180
12
Appendix 3: Image File Compatibility ....................................................................... 181
Appendix 4: Troubleshooting .................................................................................... 182
Appendix 5: Camera Error Messages ...................................................................... 189
Glossary of Selected Terms ..........................................................................191
Index ...............................................................................................................196
13
Im p orta nt Pa rts a nd Na m e s
Metering mode button* ➝➝78
Flash mode button* ➝➝86
Drive button*
Record mode button* ➝➝103
➝➝112, 113, 114
Control panel ➝➝➝➝16
Remote cable
jack➝➝116
Sub dial ➝➝See “Main dial
Hot shoe
➝➝95
and Sub dial” below.
White balance mode
Built-in flash ➝➝44, 85
button* ➝➝98
Flash button
➝➝44, 89
Mode dial ➝➝3, 70
Power switch ➝➝32
AE lock button ➝➝80
Light button ➝➝32
Manual focus
ring ➝➝68
Zoom ring
➝➝42
Card access lamp
Exposure
➝➝23, 39
compensation
button* ➝➝79
SM/CF memory
card button* ➝➝121
Card cover lock ➝➝30
Card cover ➝➝30
Macro button*
➝➝42
Main dial ➝➝
See “Main dial
Flash synchro socket
(External flash connector) ➝➝95
and Sub dial” below.
Viewfinder ➝➝➝➝17
Diopter adjustment ring ➝➝36
Focus mode switch➝➝64, 68
Eyepiece shutter lever ➝➝37
Strap eyelet ➝➝21
Monitor ➝➝➝➝15, 17
DC IN jack cap
DC IN jack ➝➝27
Connector cover
Video OUT jack ➝➝142
USB connector ➝➝168
* Press and then turn the
main dial or sub dial to
operate.
Main dial and sub dial
You can use either the main dial or sub dial in almost all cases to select camera settings. Use
whichever is more convenient for you. However, please remember that when the mode dial is set to
M (Manual mode) the main dial is used to set the aperture value and the sub dial is used to select
the shutter speed.
14
Monitor button ➝➝37
Press to switch monitor
off/on. In P, A, S, or M
mode press twice rapidly to
enter playback mode,
press again to leave
playback mode.
Menu button ➝➝174
Press to open menu in the
monitor.
OK button ➝➝174
Arrow pad ➝➝174
When using the menus,
press the pointers on the
arrow pad to move the green
highlight to select options,
and then press the OK
button.
Monitor
lock/release button ➝➝37
Allows you to raise monitor
and change angle of view.
Erase button ➝➝51
Monitor ➝➝17
If you press the monitor button
with the mode dial set to P, A,
S, or M, you can use the
monitor like the viewfinder,
with the mode dial set to
Protect button ➝➝50
INFO button* ➝➝17, 68, 138
When the histogram is set to
display, press to switch the
histogram display on/off.
playback
you can view
images of pictures that you
have taken. If you press the
menu button
you can open
and use the menus.
Shutter button ➝➝38
AF port ➝➝64
Quick reference
Remote control receiver/
self-timer lamp ➝➝113, 115
white balance button ➝➝101
Lens
Strap eyelet
➝➝21
Battery compartment ➝➝23
Tripod socket
15
Important Parts and Names (continued)
Control panel
Flash control ➝➝44, 85
Record mode
(TIFF, SHQ,
HQ, SQ) ➝➝103
ISO (Displays setting other
than AUTO) ➝➝83
Only
(No Flash) is displayed when
flash is not in use. Nothing displayed for
Auto flash mode.
White balance (Displays
setting other than AUTO)
➝➝100, 101, 102
Image
Slow synchro
adjustment
(sharpness,
contrast)
Manual focus ➝➝68
Flash
intensity
control
Fill-in flash
Auto bracket ➝➝81
➝➝106, 107
Exposure
Red-eye reduction
2nd-curtain
compensation/
Exposure level
In the P, A, S modes
displays exposure
compensation value.
(➝➝79)
In the M mode
displays the exposure
level (the difference
between the selected
and ideal exposure
levels).
Shutter speed
➝➝74
Aperture value
➝➝72
Macro ➝➝42
(➝➝77)
Self-timer ➝➝113
Metering mode ➝➝78
Digital ESP metering
Center weighted
Card error
➝➝189
Battery
check ➝➝33
Conversion lens
➝➝133
averaging metering
Spot metering
Remote control ➝➝114
Selected memory
card
SmartMedia
CompactFlash
➝➝121
Sequential shooting ➝➝112
Memory gauge ➝➝40
Displays the amount of camera
memory currently in use. One bar
lights for every picture taken and
remains on until the picture is
stored in the card and then goes
out. With no bars lit, you can take
up to 4 pictures. When all 4 bars
are lit, you cannot take a picture.
Number of storable pictures ➝➝34
At power on, also displays a percentage for the
battery check for the lithium polymer battery.
Note
• If you half-press the shutter button, the viewfinder display will light on.
• After the camera is switched on, you will see “- - ” displayed for the aperture, shutter speed, and
exposure level settings until you half-press the shutter button. When you release the shutter-button
from half-pressing, you will see “- -” displayed again after 8 seconds.
16
Viewfinder
Spot metering area ➝➝78
Indicates the area employed for spot metering
when camera is in spot metering mode
AF target mark ➝➝36
Position this mark on the subject that
you want to focus.
.
Metering mode ➝➝78
Center weighted
averaging metering
Spot metering
Nothing displayed for
digital ESP metering.
Exposure compensation/
Exposure level
In the P, A, S modes
displays exposure
compensation value.
(➝➝79)
In the M mode displays
the exposure level (the
difference between the
selected and ideal
exposure levels).
(➝➝77)
AF correct mark
➝➝64
After half-pressing
shutter button,
blinks until subject
is in focus, and then
lights when subject
is in focus. Does not
blink or light when
camera is in manual
focus mode.
AE (Automatic
Exposure) Lock ➝➝80
Aperture
value ➝➝72
Flash warning ➝➝39
Blinks to warn you that flash is
required for the shot when built-
in flash is closed (pressing the
flash button raises the built-in
flash), blinks while the flash is
White balance (Displays
setting other than AUTO)
➝➝100, 101, 102
Shutter speed ➝➝74
Macro ➝➝42
charging, and lights when flash
is fully charged.
Monitor Display (During Shooting)
Pressing the INFO button repeatedly switches the information displayed at the bottom of the monitor
in this order: Information Display ➝ Shooting Distance Display ➝ Display Off.
Shooting distance ➝ 68
Displaying Image Information ➝ 138
Metering mode
Exposure compensation/
Exposure level
AE Lock
AF correct mark
Macro
Aperture value
Flash warning Shutter speed
White balance
17
18
Getting Started
After you remove the camera from the box, first make sure that you
have everything, then attach the camera strap and install the batteries
provided with the camera.
In this chapter, you will learn how to install optional batteries not
provided with the camera and how to connect and use the optional AC
adapter which allows you to power the camera with house current.
How to use this manual
The following notations are used to alert you to important information to
help you avoid personal injury, to prevent damage to the camera or the
loss of valuable images, and to provide valuable hints and tips about
using the camera.
Warning Ignoring a warning could lead to serious injury or death.
Caution Ignoring a caution could cause minor personal injury,
damage to the equipment, or the loss of valuable data.
Note
Notes provide tips or hints about using the product more
efficiently and remind you of operational limitations.
1
If you experience a minor problem or if you see a term in text that you
do not understand, refer to the Troubleshooting or Glossary sections
provided at the end of this manual.
(➞ 12)
This notation tells you the number of the page where you
can find more information about the procedure or feature
described in the previous sentence or paragraph.
BEFORE YOU USE THIS CAMERA, PLEASE READ ALL THE
IMPORTANT SAFETY INSTRUCTIONS DESCRIBED ON THE
PREVIOUS PAGES.
Box Contents: Make Sure You Have
Everything
As you remove each item from the box, check it against the items described below to
make sure that you have everything. If any item is missing or damaged, contact the
dealer where you purchased the camera.
Lens cap
Strap
Camera
Video cable
Lens hood
Remote control
Customer registration card
Warranty card
USB cable
Lithium battery packs (CR-V3)
• Camera instructions
• SmartMedia instructions
• Remote control instructions
SmartMedia card (1)
SmartMedia Static-
free case (1)
SmartMedia labels (2)
• Software CD’s
Windows 98 USB driver installer
software CD
SmartMedia
protect seals (4)
20
1
Attaching the Camera Strap
Attach the carrying strap to both sides of the camera.
Slide the end of the strap through
the strap eyelet on the camera.
1
2
As shown in the illustration, slide
the end of the strap through the
sleeve and frame on the strap.
1
Slide the sleeve up to the eyelet.
3
4
Pull the strap tight around the
frame and make sure that it does
not slip.
2
Frame
Repeat this procedure to attach the
other end of the strap to the other
side of the camera.
5
3
Caution
• Please make sure that the strap is connected securely to the camera. Not attaching the strap, or
attaching it incorrectly, could cause you to drop and damage the camera. Olympus can assume
absolutely no responsibility for damages resulting from incorrectly attaching or not attaching the
strap to the camera.
21
Inserting Batteries and Attaching
the Optional AC Adapter
The following five types of batteries can be used with this camera, or you can use the
optional AC adapter to connect the camera to a household power outlet.
Battery Type
Battery Set Rechargeable
Lithium battery pack CR-V3 (provided with camera)
AA Ni-MH batteries (sold separately)
AA Alkaline batteries
2
4
4
4
1
NO
YES
NO
AA Ni-Cd batteries
YES
YES
Lithium polymer batteries (sold separately) (battery holder required)
Caution
• To avoid damaging the camera from overheated batteries, never use AA manganese or AA lithium
batteries with this camera. Always use identical batteries as a set, and never mix battery types.
• The lithium battery pack CR-V3 cannot be recharged.
• Performance of AA alkaline batteries varies considerably according to brand, battery age, and
temperature. (Performance is particularly erratic at low temperatures.) In some cases these
batteries may run down very quickly. We therefore recommend the use of Ni-MH batteries, lithium
battery packs, or the lithium polymer battery in preference to AA alkaline batteries.
Battery service life
The service life of batteries is affected by many factors: battery type, manufacturer, how
and where the camera is used, and so on. Here are some general guidelines regarding
service life of batteries. These general guidelines are neither a warranty or guarantee;
they are provided only for general reference.
Battery Type
Lithium battery pack (CR-V3)
AA Ni-MH batteries
Number of Storable Pictures*1
Approx. 500
Approx. 200
Note
The following conditions listed below could cause the batteries to discharge and consequently
reduce the number of pictures that can be taken, even without taking pictures:
• Repeatedly half-pressing the shutter button or turning the manual focus ring.
• Repeatedly zooming on a subject.
• Leaving the monitor on for extended periods.
• Leaving the camera connected to a computer for a long period.
*1 Test Conditions
• Repeating 2 shot multiple exposures at 10 minute intervals until batteries are dead.
• Ambient temperature: 25°C (70°F)
• Flash intensity: 50%
• Zoom for each shot, 1 (no playback, no computer connection).
22
Inserting the lithium battery pack (CR-V3)
Two lithium battery packs are required.
1
Caution
• The lithium battery pack CR-V3 cannot be recharged.
Power switch
Make sure the white line on the
power switch is at the OFF
position.
1
If the power switch is set to ON, move it to
the OFF position.
OFF
ON
OFF
ON
Power is OFF.
Power is ON.
Make sure that the card access
lamp is off.
2
3
1
If the card access lamp is blinking, wait for
it to go off.
Raise the battery compartment
knob and turn it to the open
position in the direction of the
arrow as shown in the illustration.
2
Card access
lamp
Battery compartment knob
3
Caution
• If you remove the battery case with the
camera power on, the current mode and time
will be reset. The picture just taken may not be
stored on the card, and images already stored
on the card could be damaged. Please make
sure that the power switch is set to OFF.
OFF
ON
Power switch
23
Inserting Batteries and Attaching the Optional AC Adapter (continued)
Remove the battery holder.
4
5
6
4
Battery holder
Insert a battery into the battery
holder as shown in the illustration.
Gently press down on the battery
in the direction of the arrow until
you hear it lock in place.
Do not remove
the seal.
5
If you accidentally insert the battery
reversed, you will not be able to fully insert
it. In this case, remove it and insert it
correctly.
If insulation seal
is attached, peel
it off.
Using the same procedure, insert
another battery in the other side of
the battery holder.
7
8
9
6
7
Insert the battery holder (with
batteries inserted) into the bottom
of the camera.
While pushing down on the battery
holder, turn the battery
compartment knob to the close
position and push it down.
8
If you want to start taking pictures
now, go on to the next chapter.
(➞ 29)
9
24
Inserting AA Ni-MH (sold separately), Alkaline, or Ni-Cd
Make sure all the batteries in the set are the same type. Before inserting Ni-MH or Ni-Cd batteries,
make sure that they are fully charged.
1
Insert the batteries as described in
the previous section for lithium
1
battery packs (CR-V3). (➞ 23)
1
Insert the batteries into the battery case
with the polarity of each battery aligned
correctly as shown in the illustration.
Note
• The appearance of the actual monitor menu
display may be different from the illustrations.
You may notice a gap after
loading the AA batteries into
the holder, but this is
normal. The batteries will
make proper contact when
the holder has been
inserted into the camera.
Battery holder
Before loading batteries ...
Warning
Batteries with any part of the outer seal (magnetic insulation sheath) peeling off, or any battery split
along the seam, can leak, generate heat, or explode. Never use damaged batteries in the camera.
Store-bought batteries occasionally may be defective, with all or part of the magnetic insulation
sheath peeling off. Never use batteries in this condition.
These batteries cannot be used:
All of the seal (electrical
insulation sheath) is peeled
off (bare batteries).
Batteries with all or part of
the electrical insulation
sheath peeled off.
The negative electrode
(minus terminal) is flat and
only partially covered by the
seal (electrical insulation
sheath).
The negative electrode (the
minus surface) is flat and not
covered by the seal.
Part of the negative electrode
is protruding although not
covered by the seal.
25
Inserting Batteries and Attaching the Optional AC Adapter (continued)
Inserting the optional lithium polymer battery (B-10LPB)
The rechargeable lithium polymer battery (sold
separately) can power the camera for long
periods. The lithium polymer battery is inserted
into a power battery holder (B-HLD10) (sold
separately) attached to the camera.
For more details about installing and using the
lithium polymer battery, refer to the lithium
polymer battery and power battery holder
instructions.
Power battery holder
Lithium polymer
battery
Note
Connecting the AC adapter with the battery installed
• The voltage of the dedicated AC adapter is higher than that of the batteries, so when you connect
the AC adapter to the camera, power is supplied from the AC adapter and the battery power is not
consumed.
• The voltage of the lithium polymer battery is higher than that of the dedicated AC adapter, so even
when the AC adapter is connected to the camera, power is supplied from the lithium polymer
battery. If the lithium polymer battery is installed and you want to connect the AC adapter, first
remove the lithium polymer battery.
26
Using the AC adapter (sold separately)
The optional AC adapter allows you to power the camera from a household power outlet.
1
Make sure the white line on the
power switch is at the OFF
position.
1
OFF
ON
1
If the power switch is set to ON, move it to
the OFF position.
Make sure that the card access
lamp is off.
2
2
4
DC IN jack
Plug the AC adapter power cord
into a power outlet.
3
AC adapter power cord plug
On the lower left side of the
camera, locate the cover with the
mark and open it. Plug the
AC adapter
4
3
Power outlet
other end of the AC adapter power
cord into the DC IN jack.
Note
• The AC adapter may become slightly warm
during prolonged use. This is normal and does
not indicate a problem.
Warning
Follow these simple guidelines to ensure safe operation of the camera.
• Use the correct AC adapter
To avoid damaging the camera, personal injury, or other unexpected problems, connect and use
only the AC adapter recommended for use with this camera. Olympus can accept no responsibility
for damage or injury caused by using an AC adapter that is not rated and approved for use with
this camera.
• Use the correct power source
Use only the optional AC adapter intended for use with this camera. Use the AC adapter with this
camera only in the country where you purchased it. The AC adapter is not rated for use with
different power sources, which could vary widely in different countries. Before travelling abroad,
purchase extra batteries. If you have any questions, contact an Olympus authorized service center.
27
Inserting Batteries and Attaching the Optional AC Adapter (continued)
• If a malfunction occurs
If you notice that the AC adapter body or power cord is extremely hot, or if you notice any unusual
odors or smoke around the AC adapter, unplug the AC adapter power cord from the power source
immediately. Contact your dealer or an Olympus service center for assistance.
Frequently inspect the AC adapter power cord. If you notice that the cable covering or plug is
damaged in any way, immediately contact your dealer or an Olympus service center.
• Connecting and disconnecting the AC adapter
Always make sure that the camera is switched off before you connect/disconnect the AC adapter
to/from the camera. Never handle the AC adapter power cord with wet hands.
When connecting the AC adapter, (1) first plug the AC adapter power cord into the power outlet,
(2) connect the other end of the power cord to the DC IN jack on the camera, and then (3) switch
the camera on. Make sure that the power cord is securely plugged into the power outlet.
To disconnect the AC adapter, switch the camera off, disconnect the power cord from the camera,
and then unplug the power cord from the power supply. Grip the AC adapter, not the cord, when
you unplug it. Never twist, bend, or pull on the power cord.
Always unplug the AC adapter from the power outlet when the camera is not in use.
28
Taking Pictures
(Shooting and Viewing Basics)
In this chapter you will learn how to insert a memory card, take a
picture, and view the picture. This chapter describes only the basic
procedures for taking and viewing pictures. For more details about
camera operation, refer to the later chapters.
2
Inserting a Memory Card
The SmartMedia and CompactFlash card store pictures that you take with the camera.
Throughout these instructions, both the SmartMedia and CompactFlash card are simply
referred to as cards. Both cards can be installed together, or either card one at a time.
However, at least one card must be inserted in order to operate the camera.
Caution
• A memory card is a delicate, precision device. Handle it carefully. Never touch the electrical
contacts on the card, and never subject a card to strong shocks or vibrations.
• Before you can use a SmartMedia or CompactFlash card purchased separately, it must be
formatted in the camera. (© 152)
Electrical contacts
Protect area
SmartMedia (SM) provided
CompactFlash (CF) (sold separately)
Can be used same as SmartMedia to store
images.
You can use Olympus or any other brand 3V
(3.3V) SmartMedia memory card (5V cards
cannot be used).
Make sure that the card access
lamp is off.
1
If the card access lamp is blinking, wait for
it to go off. If you accidentally open the
card cover while the card access lamp is
blinking, you could lose the image being
stored on the card or possibly damage the
card itself.
1
Card access
lamp
While pressing down the round
release on the card cover lock,
slide and raise the card cover lock.
2
2
The card cover opens.
Card cover lock
Card cover
While pressing
here, slide up.
30
Insert the card.
3
• SmartMedia card
Taking care not to touch the electrical
contacts, hold the SmartMedia card with
the notched corner down, and then insert
it into the slot closest to you. Push the
card completely into the slot.
2
To avoid damaging the electrical contacts,
make sure that you do not insert the
SmartMedia card into the CompactFlash
card slot.
Notched corner
SmartMedia
To remove the SmartMedia card, see the
instructions below.
• CompactFlash card
With the arrow on the card facing you,
insert the CompactFlash card into the slot
farthest away from you. Push the card
completely into the slot.
Insert the card straight into the slot,
making sure that the side with the arrow is
facing toward you. To avoid damaging the
card, never force it into the slot if it cannot
be inserted smoothly.
CompactFlash
To remove the CompactFlash card, see
the instructions below.
To close the card cover, press it
gently until you hear it click and
lock.
4
Removing a SmartMedia card
Gently push in on the installed SmartMedia card to release
it, and then pull it out of the camera.
Removing a CompactFlash card
Gently press the eject button to release the CompactFlash
card.
To prevent the CompactFlash card from jumping out of the
camera, press the eject button with only light pressure.
Eject button
With both cards set in the camera
With both a SmartMedia and a CompactFlash card installed in the camera, you can select
either card for storing pictures. (© 121)
31
Setting the Shooting Mode and
Switching the Camera On
Switch the camera on.
If the lens cap is attached, remove
it.
1
Press the latches inward and pull the cap
off.
Turn the mode dial to align P
2
3
1
(Program mode) with the
mark.
Move the power switch and make
sure the white line on the power
switch is at the ON position.
2
When the camera is switched on, the
battery check and number of storable
pictures are displayed in the control panel.
OFF
ON
Set the focus mode switch to AF
(autofocus).
4
5
3
The first time that you use the
camera, you should set the date
and time. (© 126)
Control panel
MF
4
AF
Battery
check
Number of
storable
pictures
Control panel difficult to see?
Press
. The control panel backlight lights
for about 8 seconds.
LIGHT button
(Lights the control panel)
32
Checking the Battery
In this section we provide a general
explanation of how to read and understand
the battery check display. When the battery
check shows that the batteries are low,
replace the batteries with fresh batteries,
or recharge the Ni-MH, Ni-Cd batteries or
the lithium polymer battery.
2
Control panel
Before taking a trip, or before an important
shooting session, always check the battery
capacity.
Battery check
Battery Check Display
Meaning
Lights for a short time after
camera is switched on and then
goes off automatically.
Batteries are fully charged. Camera is
ready for shooting.
Blinks and continues blinking.
Batteries are low. Replace batteries with
fresh batteries. You may be able to shoot
more pictures, but batteries could run out
completely during shooting.
Lights for a specified time, and
the control panel goes off.
Batteries are dead. Replace batteries with
fresh batteries. Shooting is not possible.
Camera is switched on, but the control panel is not visible?
If the camera is not used for a specified time it will switch off the control panel automatically to
conserve battery power. To restore the camera to full operation, half-press the shutter button.
If the control panel remains off for one hour, the camera will power itself off automatically. To restore
the camera to full operation, you must use the power switch to switch the camera off and switch it
on again. You can select the time the camera remains idle before the control panel is switched off
automatically. (© 128)
Lithium polymer battery
If you are using the optional lithium polymer
battery, the amount of power remaining is
also displayed as a percentage.
Note
Battery check
Battery capacity (%)
displayed for only 3 sec. after
camera is switched on.
• Low temperatures could shorten the service
life of some batteries, depending on their
characteristics.
33
Checking the Number of Storable Pictures
When you switch the camera on, the number of storable pictures is displayed in the
control panel. If you see the number 12, for example, this means approximately 12 more
pictures can be taken and stored on the memory card.
Control panel
Selected card
Number of storable pictures
Memory card storage capacity
Images per Card (Reference value)
Resolution (pixels)
Compression
(Default settings)
File Size
(Reference value)
Quality
(Default settings)
8 MB
32 MB
TIFF
SHQ
HQ
2240 x 1680 (FULL)
2240 x 1680 (FULL)
2240 x 1680 (FULL)
1280 x 960 (SXGA)
1:1
1:2.7
1:8
11.3 MB
2.8 MB
1 MB
0 shots
2 shots
8 shots
23 shots
2 shots
11 shots
32 shots
94 shots
SQ
1:8
340 KB
Note
• When you see “TIFF” blinking in the control panel, the camera is in the RAW data mode. (© 131)
In this mode, one picture file is approximately 7.6 MB, and you will be able to save approximately
4 shots on a card (32 MB card).
If you intend to use the images on a computer...
Before you transfer files to a computer, you should select how the files are to be named. (© 154)
Storage capacity of a memory card other than a SmartMedia and
CompactFlash card
The storage capacity of a memory card is roughly calculated based on the file sizes of the images.
However, please understand that due to variables in data handling by the camera, file compression,
memory management, and so on, the estimation of the number of storable picture may not always
be precise.
Note
• When the number of total shots reaches 999, the number 999 is displayed in the control panel.
• The number of storable pictures displayed in the control panel changes after you select another
record mode or select files for printing.
• The amount of data required to compose a picture depends on the subject, so you may be able to
store more or fewer images on a card. Because of this difference in size, you may not be able to
store another picture, even after you delete one image from the card with single-frame delete.
• Because of the difference in cluster size used on SmartMedia and CompactFlash cards, the same
number of images may require more or less space for storage on either card. When using a
CompactFlash card, the actual capacity of the card could be slightly more or less than the
capacity indicated in the control panel.
34
When the Number of Storable Pictures Is
Not Displayed
2
0 and
blinking in the control panel?
The card is full and can no longer store pictures, so do one of the following:
• If a SmartMedia and CompactFlash card are both installed, select the other card. (© 121)
• Delete unneeded images from the full card. (© 51)
• Switching to a smaller file size. (© 103)
• Remove the full card and install a new or empty card. (© 30)
Record mode (quality setting)
Control panel
Monitor
Viewfinder
-F- and
blinking in the control panel?
The card has not been formatted or the card is damaged, so do one of the following:
• Format the card. Formatting a card erases all images stored on the card. To format the card, on
the arrow pad press
and then press the
button. After NO PICTURE is displayed, you can
continue taking pictures.
• Replace the card. (© 30)
• If a SmartMedia and CompactFlash card are both installed, select the other card. (© 121)
Control panel
Monitor
Viewfinder
blinking in other situation (not described above)?
Appendix 5: Camera Error Messages (© 189)
35
Holding the Camera
In this section you will learn how to hold the camera when shooting pictures.
Framing a picture with the viewfinder
Diopter
adjustment ring
AF target mark
Adjust the viewfinder display for
your own eyesight.
1
Look at the AF target mark in the
viewfinder. If the AF target mark is blurry
or otherwise difficult to see, turn the
diopter adjustment ring as shown in the
illustration until the AF target mark is
sharp and clear.
Viewfinder
Grip the camera.
2
3
Holding the Camera
Grip the camera with both hands with your
arms and elbows down at your sides.
Make sure that your fingers or the strap do
not block the lens, built-in flash, or AF
port.
Compose the picture in the
viewfinder.
Horizontal grip
The picture that you take will be 5% larger
around the edges than what you see
through the viewfinder. (The viewfinder
displays 95% of the composed picture.)
Cannot see through the viewfinder?
• Make sure that the lens cover has been
removed.
• Check the eyepiece shutter lever on the left
side of the viewfinder. If it is down, raise it.
(© 14)
Vertical grip
Incorrect!
When the subject in the viewfinder
is dark
• Check the power switch. If the power switch is
at the OFF position, move it to ON. If the
power is off with the power switch in the ON
position, the camera may have powered itself
off. Move to OFF then move to ON again.
Finger blocking AF port
Finger blocking flash
Finger blocking
the lens
Note
• Do not subject the lens to physical shocks.
36
Framing a picture with the monitor
2
Press the monitor button
.
1
1
You can see the same view in the monitor
and the viewfinder. (However, framing
pictures through the monitor consumes
more battery power than when using the
viewfinder.)
2
O
P
E
N
Eyepiece shutter
lever
To prevent light from behind the
camera entering the viewfinder,
lower the eyepiece shutter lever.
2
3
O
PEN
Move the monitor lock/release
button to the left (see illustration).
3
The upper part of the monitor projects
about 1cm (0.3 in.) from the camera.
If you need to raise the monitor,
pull the bottom out.
4
5
Hold the camera as steady as
possible.
4
Hold the camera carefully without blocking
the lens, flash, or AF port with the camera
strap, your fingers, etc.
5
Compose the picture in the
monitor.
6
6
The picture that you take will be the same
as the picture composed in the monitor.
(The monitor displays 100% of the
composed picture.)
You can also take a picture at Step 3 for a
high-angle shot.
Cannot see through the monitor?
• Make sure that you pressed the monitor button
• Make sure that the lens cap has been removed.
to activate the monitor display.
• After the camera is left idle for a specified length of time, it will enter the sleep mode. Press the
shutter button lightly to restore the camera to full operation.
• Check the power switch. If the power switch is at the OFF position, move it to ON. If the power is
off with the power switch in the ON position, the camera may have powered itself off. Move to OFF
then move to ON again.
• Mode dial set correctly? Make sure that the mode dial is set to P, A, S, or M.
Note
• When framing a picture with the monitor, lower the eyepiece shutter lever. Light entering the
viewfinder from behind the camera could wash out the picture with white light.
37
Pushing the Shutter Button
Grasp the grip on the camera firmly and use the flat of your finger (not your fingertip) to
press the shutter button gently. Applying too much pressure could cause camera shake
and spoil your shot by blurring the image. The shutter is released in two steps, first with a
half-press and second with a full-press.
Half-press
Full-press
(gently pressing the button down half-way)
(after half-pressing, gently press down all
the way.)
A half-press does not release the shutter.
When you half-press the shutter button,
automatic focusing and exposure adjustment
begins. The AF correct mark in the lower left
corner of the viewfinder lights when the
subject is in focus. As long as you keep the
shutter button depressed half way, the subject
will remain in focus and the exposure will not
change. This is called AF/AE lock.
Releases the shutter to take the picture.
Shutter button
Time between full-press shutter release and the start of exposure
After you full press the shutter button, the shutter actually releases after 60ms. However, when the
monitor is used to compose and shoot a picture, the time between a full shutter press and actual
release time could vary from 60ms to 100ms.
Also, please remember that when you use the flash, shutter release will be delayed approximately
200ms for firing the pre-flash.
The camera can be set to emit a sound at shutter release. (© 122)
38
Half-press
Gently half-press the shutter
button.
1
The camera emits a small beep and the
AF correct mark in the lower left corner of
the viewfinder lights green when the
2
subject is completely in focus. Keep the
button pressed halfway and go to Step 2.
If the AF correct mark in the lower left
corner of the viewfinder blinks, the subject
is not completely focused. Release the
shutter button, compose the picture again
by centering on another part of the picture,
and then repeat from Step 1. If you see
AF target mark
Viewfinder
the
mark blinking, this is the low light
warning, telling you that you must use the
built-in flash. Press the flash button
open the built-in flash unit.
to
Lights and emits a
small beep when
subject in focus.
Low light warning.
When this mark
blinks, and flash is
Blinks when subject is required.
not in focus. Neither
lights nor blinks when
camera is in the
manual focusing
mode.
Gently full-press the shutter
button.
2
The picture is taken and the image starts
to be stored on the memory card. The card
access lamp blinks while the picture is
being stored on the card.
Full-press
To take another picture, repeat from Step
1. While the camera is storing the previous
shot on the card, you can take up to 4
exposures.
Card access
lamp
Flash button
Taking pictures without half-pressing
You can take pictures without half-pressing the shutter button. In such cases, the camera starts
focusing when you full-press the shutter button. Therefore it takes a few moments to take a picture,
and you might miss a good picture.
Low battery warning blinks immediately after taking a shot?
Immediately after taking a shot, if you see the low battery warning blink and then light in the control
panel, the picture may not have been taken correctly. Install a new battery and then play back the
previous shot to confirm that it was stored correctly. (© 46, 137)
39
If You Cannot Take a Picture
Message displayed in the viewfinder?
If you see Card 0 blinking in the viewfinder
The memory card is full and you cannot continue taking
pictures with the card. In order to continue shooting with the
card, you will have to remove some pictures from the card.
• Deleting Single Pictures (© 51)
• Transferring Pictures to a Computer (© 167)
• Deleting All Images (© 150)
Viewfinder
Control panel
If you see Card blinking in the viewfinder, refer to the error message summary.
Appendix 5: Camera Error Messages (© 189)
Four segments lit in the memory gauge?
If nothing displayed on the monitor after full-pressing the shutter button, you have to wait. The
memory gauge is divided into 4 segments. One segment lights for every image that is waiting to be
stored on the card. If all 4 segments are on, this means you cannot take another picture until at
least one of the segments in the memory gauge goes off. The amount of time required to store a
picture depends on the condition of the SmartMedia or CompactFlash card, and the record mode
setting.
Control panel
Memory gauge
40
The AF correct mark in lower left corner of viewfinder is
blinking, or the picture is out of focus
Make sure that the focus mode switch on the left side of the camera is set to AF, and then select a
shooting mode that uses autofocusing. (© 32) While the camera is set for autofocus, half-pressing
the shutter button should automatically set the correct focus and exposure for the picture.
With some subjects which are difficult to focus, however, you may see the AF correct mark in the
viewfinder continue to blink after you half-press the shutter button. If this occurs:
• Point the camera slightly away from the subject to shift the AF target mark in the viewfinder and
half-press the shutter button again.
2
• Use manual focusing.
Taking Pictures: Distance and Focus (© 63)
Using Manual Focus (MF) (© 68)
41
Enlarging the Subject (Zoom and Macro)
By moving the zoom ring you can enlarge or reduce the size of the subject in the
viewfinder. Twist the zoom ring to the left to enlarge the size of the subject (T: telephoto),
or turn it to the right to reduce the size of the subject (W: wide-angle).
Zoom ring
Zoom up (TELE)
Zoom down (WIDE)
Autofocus and close-up shots (Macro)
You can take close-up shots within 60 cm (approx. 23.5 in.) from the camera. While pressing the
macro button
, turn the main dial or sub dial until you see the macro mark
in the control panel
or the viewfinder.
Control panel
not displayed
displayed
Autofocus can focus a
subject in the range ∞~
60 cm (approx. ∞~23.5 in.)
from the camera.
Autofocus can focus a
subject in the range
approx. 60 cm~20 cm
(approx. 23.5 in.~8 in.)
from the lens.
Main dial
Macro button
42
Shooting distance and range
With the widest angle setting, you can approach up to 20 cm (approx. 8 in.) and shoot a subject
about the size of a business card (approx. 76 x 57 mm) (3 x 2.3 in.).
2
Zoom
Shooting Range Shooting Area Width x Height (Reference Values)
60 cm (23.5 in.)
20 cm (8 in.)
629 x 465 mm (25 x 18.6 in.)
234 x 172 mm (9.4 x 6.9 in.)
176 x 132 mm (7 x 5.3 in.)
76 x 57 mm (3 x 2.3 in.)
WIDE Limit
60 cm (23.5 in.)
20 cm (8 in.)
TELE Limit
Note
• If you use the Macro Extension Lens Pro (MCON-35), you can approach up to 12 cm (approx. 4.8
in.). At this distance, when the camera is set for the TELE limit, you can shoot a picture 49 (W) x
37 (H) mm (approx. 2 (W) x 1.5 (H) in.).
Shooting distance and perceived distortion
The image may appear slightly distorted with some lenses. With the camera set for wide angle,
distortion could increase as you bring the camera closer to the subject.
43
Using the Built-in Flash
If the incident light on the subject is too low, when you half-press the shutter button you
will see the low light warning blinking intermittently in the lower left part of the
viewfinder. If this occurs, press the flash button
to raise the built-in flash. Now the
flash will fire when you take the picture.You can also use the flash to illuminate a dark
subject positioned in front of strong backlighting.
Note
• The low-light warning blinks while the flash is recharging and then lights up when charging is
completed.You cannot take a picture when the low-light warning is blinking while the flash
recharges. Wait for the low-light warning to stop blinking and then light up before you take the next
picture.
Press the flash button
.
1
2
2 3
The built-in flash pops up.
Half-press the shutter button.
The flash indicator appears in the
viewfinder. If the flash indicator is blinking,
the flash is recharging. When the flash
indicator lights and stops blinking the flash
is charged and ready to fire.
1
Full-press the shutter button.
3
The flash fires with an intensity adjusted
for the best exposure and the picture is
taken.
Flash will not fire?
If the subject is exposed to brighter light after the built-in flash is raised, the flash will not fire.
However, you can set the camera in the fill-in flash mode so the flash will fire even with brightly
lighted subjects. (© 56, 86)
Caution
• Rapid, continuous firing could cause the flash unit to overheat. To prevent damaging the flash unit,
do not fire the flash more than 30 times in succession. After prolonged firing of the flash, wait at
least 10 minutes for the flash unit to cool before you resume shooting. Check the flash frequently
and make sure that it is clean. If it is dirty, wipe it clean with a soft dry cloth. Firing the flash with its
face dirty could cause the performance of the flash unit to deteriorate.
44
Flash working range
ISO
AUTO
80
160
320
Max. WIDE (WIDE Limit)
Max. TELE (TELE Limit)
0.5 (1.7 ft.)~7.4 m (24.4 ft.)
0.5 (1.7 ft.)~5.2 m (17.2 ft.)
0.7*2 (2.3 ft.)~7.4 m (24.4 ft.)
1.0*2 (3.3 ft.)~10.4 m (34.3 ft.)
0.6 (2 ft.)~8.9 m (29.4 ft.)
0.6 (2 ft.)~6.3 m (20.8 ft.)
0.9*1 (3 ft.)~8.9 m (29.4 ft.)
1.3*1 (4.3 ft.)~12.5 m (41.3 ft.)
2
*1 Range starts at 0.6 m (2 ft.) if you set the camera to the A (Aperture Priority) mode and stop the
aperture size down to 6.3 or higher.
*2 Range starts at 0.5 m (1.7 ft.) if you set the camera to the A (Aperture Priority) mode and stop
the aperture size down to 6.3 or higher.
If you attempt to use the flash closer than the ranges described above, the entire picture may be too
bright, or shadows may appear in parts of the picture. If you attempt to use the flash farther than the
ranges described above, the light from the flash will not reach the subject and the subject will
appear dark. You may be able to take a picture farther than these ranges by increasing the ISO
value, but raising the ISO value could cause the picture to appear grainy. With ISO set for AUTO, the
ISO value will be adjusted automatically within the range of 80~160. (© 83)
Caution
• Please do not use the lens hood or conversion lenses when shooting with the internal flash. These
attachments will block some of the flashed light, resulting in a problem known as vignetting (loss or
darkening of the corner areas of the image). The ranges in the table above assume that no such
attachments are on the camera.
For more details about how to use the flash. (© 85)
45
Viewing Pictures (Playback)
In this section, you will learn how to view the pictures that you have taken.
You can view the pictures that you have taken one by one.You can enlarge the single-
image display, or even display several images at once with the index display.
Set the mode dial to playback
.
1
The last picture taken is displayed on the
monitor.
OFF
ON
1
If you leave the mode dial set to P, A, S, or
M, you can also rapidly press the monitor
button
twice.
Use the arrow button pointers to
view other images.
2
10th previous
frame
Displays previous frame.
Displays next frame.
2
Previous
frame
Next
frame
Displays 10th previous frame.
Displays 10th succeeding frame.
10th succeeding
frame
Images can also be displayed automatically, one by one, by setting up a slide show. (© 140)
46
To return to the shooting mode
• When mode dial is set to playback
.
You cannot press the shutter button to take a picture in the playback mode. In order to resume
2
shooting, set the mode dial to P, A, S, or M.
• When mode dial is set to P, A, S, or M.
You can just press the shutter button to take a picture.
Press the monitor button
and wait for the monitor display to go off.
Cannot enter playback mode?
If the card access lamp is blinking, you cannot enter the playback mode, even after setting the mode
dial to playback
. When the card access lamp goes off, the camera returns to the playback mode.
Monitor blank?
The camera will automatically power itself off if it remains idle for a specified length of time. (© 128)
The camera will switch on automatically after you start to use the camera again.
Caution
• To avoid damaging the monitor or interfering with the quality of its display, never touch or strike the
surface of the monitor.
47
Viewing Pictures (Playback) (continued)
With the mode dial set to playback
, use the main dial or sub dial to enlarge the
image, or switch to the index display and display several images at one time in the
monitor.
1 Frame
Display
Index Display
Enlarged Display
This feature is convenient
when you want to browse the
pictures stored on the
This feature is convenient when you want to
confirm that a picture is correctly in focus.
selected card when you need
to find a particular picture.
16 frames 9 frames 4 frames
1 frame
1.5x
2x
2.5x
3x
4x
Enlarged display
Set the mode dial to playback
, and turn the main dial to the magnifying glass mark
(or turn the sub dial clockwise) to enlarge the image in the monitor.
Move the main dial to the
magnifying glass mark
the sub dial clockwise).
1
(or move
1
The image is magnified in the monitor. If
you continue to turn either dial in the same
direction, you can enlarge the image
further.
With an enlarged image displayed,
use the pointers on the arrow pad
to scroll and view other parts of
the image that you cannot see.
2
2
Up
Left
Right
Scrolls up.
Down
Scrolls down.
Scrolls left.
Scrolls right.
3
If you want to display another
image at normal size, turn the main
3
dial to the index mark
(or sub
dial counterclockwise), and then
use the pointers on the arrow pad
to select the next image that you
want to display.
3
48
Index display
Set the mode dial to playback
, and then turn the main dial to the index mark
(or
turn the sub dial counterclockwise) to display several images at one time in the monitor.
2
Turn the main dial to the index
1
mark
(or turn the sub dial
counterclockwise).
The monitor is divided into sections and
displays 4 images. The position of the
green highlight shows the currently
selected image. If you continue to turn
either dial in the same direction, you can
display 9 and then 16 frames.
1
Displays previous
index
Use the pointers on the arrow pad
to select another image.
2
Moves
2
highlight
to next
frame
Moves highlight
to previous
frame
Displays previous index.
Displays next index.
Displays next index
Moves highlight to previous frame.
Moves highlight to next frame.
To display the selected image at
normal size, move the main dial to
3
3
the magnifying glass mark
(or
move the sub dial clockwise) to
return to the single image display.
The selected image is displayed at normal
size.
3
The main dial and sub dial
To perform many settings you can use either the
main dial or sub dial, so use whichever is more
convenient for you. However, please remember
that when the mode is set to M, use the main
dial to set the aperture and use the sub dial to
set the shutter speed.
Sub dial
Main dial
Using the remote control
You can use the RM-1 remote control unit to
take pictures and view images in the index or
enlarged displays. For details, refer to the
instructions for the RM-1 remote
control unit.
49
Protecting Pictures
After you protect a picture, it is protected from accidental erasure from the memory card.
After protected images are copied to a computer, they are stored as read-only files but
are not protected from accidental erasure.
Enter the playback mode and
display the picture that you want to
1
protect. (© 46)
If you are using the index display, press
the pointers
on the arrow pad
1
to move the green highlight to the image
that you want to protect.
Press the protect button
.
2
Pictures that have been protected are
annotated with the protect mark
.
2
Monitor
To remove protection
Display the protected image on the monitor and
press the protect button
protection.
to remove
To protect all images on a card
Attach a protect seal to a SmartMedia card in
order to protect all images stored on the card
from accidental erasure. For details, refer to the
SmartMedia instructions. Do not reuse protect
seals.
Protected
image
Caution
• Formatting a memory erases everything on the
memory card, even images which have been
protected.
50
Deleting Single Pictures
You can delete one by one pictures that you do not want to keep. Deleting unneeded
pictures creates more space on the selected card and increases the number of pictures
that you can store on the card.
2
Enter the playback mode and
display the picture that you want to
1
delete. (©©46)
If you are using the index display, press the
1
pointers
on the arrow pad to
move the green highlight to the image that
you want to delete.
Press the erase button
.
2
3
2
3
YES and NO is displayed in the monitor.
On the arrow pad, press
move the green highlight to YES.
to
If you change your mind and you do not
want to delete the image, with NO
selected just press the
button or press
the erase button
.
4
Press the
button.
4
The card access lamp blinks and the
selected image is deleted from the card.
Pictures which cannot be deleted
Protected pictures cannot be deleted from the memory card. Protected pictures can be deleted later,
but only after releasing the protection before executing frame delete. (© 50)
Protected thumbnail files and a SmartMedia card with a protect seal attached cannot be deleted.
Reusing memory cards
After storing all the images on a card to a hard disk on a computer, you can delete all the images
from the card and then re-use the card for taking and storing more pictures. (© 150) Always copy
important pictures to hard disk before you delete images from a card.
51
Switching the Camera Off
Always switch the camera off immediately after every shooting session. If you leave the
camera on while it is not being used, it will automatically enter the sleep mode and then
automatically switch itself off after one hour. (© 128) Always switch the camera off before
changing batteries or before storing the camera in a case or bag.
Move the power switch to OFF.
1
The camera switches off.
OFF
ON
If an image is being saved on a card (the
1
card access lamp will be blinking), the
camera will not power off until the image
has been saved on the card.
Attach the lens cap.
2
Press inward on the cap’s latches, fit the
cap over the lens, and then release the
latches. (To remove the cap: Press on the
latches and pull the cap off.)
2
Caution
• While the card access lamp is blinking, never open the card compartment cover or unplug the AC
adapter. If the power supply to the camera is interrupted while the camera is saving a picture on a
card, this could cause the camera to reset all operation mode settings (date, time, etc.), could
damage images already stored on the card, or could prevent other pictures from being saved on
the card.
52
Shooting Techniques:
General Introduction
This chapter briefly introduces some basic techniques you can apply to
different situations and shoot beautiful professional looking pictures to
achieve the effects that you want, even if you have little experience
using a camera.
Portraits. You can vary the aperture setting to blur portrait
background, adjust flash, and select a different metering mode to
create artistic effects in portraits.
Portraits (Backlit subjects). By lighting a subject from behind with
backlighting, you can soften shadows on the face and add highlight to
the outlines of the subject’s hair.
Subject in daylight shadow. Even with sufficient light on the subject,
you can set the flash to fire and reduce daylight shadows on the
subject and get beautiful results.
Subject and background both in focus. There will be occasions
when you want to change the aperture value to ensure accurate
focusing of background scenery, or to make sure that all subjects in a
large group picture are in focus.
Moving subjects. You can set a fast shutter speed to capture fast
moving subjects sharply frozen in time, or set a slow shutter speed and
show them in blurred motion.
3
Close-up. After setting the camera in the macro mode, you can shoot
subjects as close as 20 cm from the lens for detailed nature shots.
Night scenes. You can use slow shutter speeds in combination with
lower ISO settings to experiment with shooting night scenes or other
dark subjects.
Subject against a night scene background. When you shoot a
subject with a flash against a night background, you can use slow
shutter speeds to achieve a variety of artistic effects.
Sunsets and fireworks. By adjusting white balance and using manual
focusing, you can extend the range of creativity in your color pictures.
Shooting Portraits (Focused Subject,
Blurred Background)
When you shoot a portrait, you can create the effect of the subject floating against a
blurred background. In order to achieve the effect of a floating subject, open the aperture
to take the picture.
The smaller the aperture value, the shallower the
depth of field which causes the background to blur.
You can easily confirm the current aperture value by
reading it in the viewfinder before you take a picture.
• If you want to adjust the aperture value, set the
mode dial to A (Aperture priority mode) and adjust
the aperture value by turning the main dial or sub
dial.
• The aperture value can be adjusted within the
following ranges.
Max. TELE F2.4~F11
Max. WIDE F2.0~F11
Setting the Aperture Value (➞ 72)
• You can achieve more blurring in the background
with the TELE setting than the WIDE setting.
• Try to put as much distance as possible between
the subject and the background.
Viewfinder
Aperture value
54
Shooting Portraits (Shooting Backlit
Subjects)
By lighting the subject from behind, you can add highlight to the hair. With this method
you can take a picture of a sharply outlined subject in sparkling light. If the face of the
subject appears dark, use exposure compensation and the flash to take the picture.
3
Position the spot meter mark on
the center of the subject’s face
The camera can be set to adjust automatically for a
backlit subject in order to attain the ideal exposure for
the shot. For a dark subject, you can use exposure
compensation or set the camera in the spot metering
mode so you can meter light on the subject’s face.
You can also adjust the flash control mode.
Using Exposure Compensation (➞ 79)
Selecting the Metering Method (➞ 78)
Shooting a Subject in Daylight Shadow
(Daylight Synchro) (➞ 56)
Viewfinder
Note
• We recommend attaching a lens hood to the camera to
prevent the occurrence of the flare or ghost effect in your
pictures.
Attaching the Lens Hood
When Camera is Not Used
Flash button
Metering mode
button
White dot
White dot
White arrow
mark
White arrow mark
Align the white arrow
on the
The lens hood can be reversed
and attached to the camera
when the camera is not in use.
Lens hood
lens hood with the white dot on
the camera and then turn
clockwise in the direction of the
arrow until it stops and you hear
a click.
Align the arrow
on the lens
hood with the white dot on the
camera and then turn clockwise
in the direction of the arrow until
it stops and you hear a click.
55
Shooting a Subject in Daylight Shadow
(Daylight Synchro)
Even with sufficient light on the subject (when the flash warning is not blinking in the
viewfinder), you can set the flash to fire and reduce daylight shadows on the subject and
take a beautiful picture.
When you see shadows on your subject in strong
daylight, use the fill-in flash mode to reduce the
shadows.You can also use the fill-in flash on a
subject which could appear too dark against a strong
backlight. In such situations, if you use the fill-in flash
at high noon to brighten the subject you can capture
both the subject and the background clearly. In either
case, you can achieve a catch light effect by the
reflection of the light in the subject’s eyes to enliven
When the background is brighter
than the subject, the subject could
become dark or the background
could wash out.
the appearance of your subject.
Selecting a Flash Mode (➞ 86)
If you use the flash, both the
subject and the background can
be shot with the correct exposure.
Flash mode button
Press the flash button
to raise the flash unit. Hold
down the flash mode button
and then turn the main
dial or sub dial. When you
see the mark displayed
Main dial
in the control panel, the
camera is in the fill-in flash
mode.
Flash button
56
Shooting the Subject and Background
Both in Focus
Select a large aperture value to focus your subjects and the scenery in the background.
3
Set the mode dial to A (Aperture priority mode) and
then select a large aperture value by turning the main
dial.
Note
• The number for the aperture value is inversely proportional
to the aperture diameter. Selecting a large number (11 for
example) decreases the diameter of the aperture,
lengthens the depth of field, and brings the background
into focus.
Setting the Aperture Value (➞ 72)
However, selecting a large aperture value in low light
will slow down the shutter speed, causing the picture
to blur as a result of camera shake. Under these
conditions, try to steady the camera as much as
possible by leaning against the side of a building, a
tree or a lamp post, or mount the camera on a tripod.
Viewfinder
Aperture value
Subject not centered in the viewfinder (➞ 65)
57
Shooting Moving Subjects
When you shoot a moving subject like a runner or a moving vehicle, you can vary the
shutter speed to achieve the desired effect.
With a fast shutter speed, you can capture a
momentary facial expression or freeze a subject in
motion. Similarly, with a slow shutter speed you can
achieve the effect a blurred motion. You can shoot a
moving subject like a waterfall or river with a fast
shutter speed to freeze the action, shoot it with a
slow shutter speed to create the artistic effect of
flowing water in motion.
Action shot at fast shutter speed
(1/500)
Freeze action
To adjust the shutter speed manually, set the mode
dial to S (Shutter priority mode), and then turn the
sub dial or main dial to select the desired shutter
speed.
Setting the Shutter Speed (➞ 74)
You can also use the sequence mode to shoot
multiple exposures to capture the subject in several
sequential positions.
Taking Multiple Exposures (➞ 112)
Action shot at slow shutter speed
(1/15)
Conveys flow of movement
Viewfinder
Shutter speed
250 = 1/250, 2" = 2
seconds
58
Shooting Close-up
For close-up shots, use the macro mode
which allows you to bring the camera as
close as 20 cm (8 in.) from the subject. For example, you could accurately capture the
details of a flower’s petals, pistils, and stamens.
3
To set the camera in the macro mode, press and hold
down the macro button , turn the main dial or sub
dial until you see the macro mark
panel, and then take the picture.
in the control
Note
• With the camera set for TELE, you can bring the camera
as close as 20 cm (8 in.) from the subject to photograph
an area about the size of a business card, or
approximately 76 x 57 mm (3 x 2.3 in.). (➞ 42)
• There is a greater possibility of camera shake spoiling a
picture, so try to steady the camera as much as possible,
or use a tripod.
Shot in macro wide-angle mode
• Use as fast a shutter speed as possible to prevent the
wind or other movement from causing the subject to blur.
• If you use the flash in some situations, the lens barrel
could cause a shadow in the picture.
• For close up shots, you may find it convenient to pull out
the monitor and compose the picture in the monitor.
(➞ 37)
• For best results in close-up shots, you may want to use
the optional Macro Extension Lens Pro (MCON-35).
(➞ 133)
Shot in macro TELE mode
Cannot focus the shot?
Using Autofocus (AF) (➞ 64)
Capturing stages of a flower blooming
You can use time-lapse photography to set up shooting
multiple exposures at pre-set intervals to capture the stages
of a flower blooming, or other slow changes over a long
period.
Using Time-Lapse Photography (➞ 118)
59
Shooting Night Scenes
When shooting night scenes or other dark subjects, mount the camera on a tripod and
select a slow shutter speed (1/2 sec. or more).
If you select any mode where the exposure is set
automatically (P or A) and raise the built-in flash, the
shutter speed cannot be set slower than 1/30 and
you cannot achieve the correct exposure of a night
scene. If you want to shoot a night scene, take the
picture with the flash closed. With the flash closed,
the shutter speed is set for up to 2 seconds.
For an extremely dark scene, use the manual mode
(M) so you can select a shutter speed of up to 8
seconds, or you can select the bulb mode so you can
Night scene shot with automatic
exposure
keep the shutter open up to approximately 30
seconds, as long as you keep the shutter button
depressed.
Note
• We recommend using a tripod to avoid camera shake.
Selecting Aperture and Shutter Speed Manually
(➞ 76)
Night scene shot with slow shutter
speed
For the metering method, select digital ESP or Center
weighted averaging metering, as Spot metering will
measure only the light in a very small area in the
center of the picture.
Selecting the Metering Method (➞ 78)
You can select a higher ISO setting to brighten your
pictures, but this can also cause your pictures to
appear grainy. We recommend that you test a variety
of settings to achieve the effect that you want.
Changing the ISO setting (➞ 83)
If you have difficulty in focusing the subject, use
manual focusing.
Using Manual Focus (MF) (➞ 68)
Color not what you expect?
Set white balance (color temperature) for 5500K.
Using Preset White Balance (➞ 102)
60
Shooting a Subject Against a Night Scene
Background (Slow Synchronization)
When you shoot a subject with a flash against a night background, you can use slow
shutter speeds to achieve a variety of artistic effects. This technique is called slow
synchronization.
3
Set the mode dial to P or A.
Press and hold down the flash mode button
and
then turn the main dial or sub dial until you see the
in the control panel.
In the slow synchronization mode, the shutter speed
can be set for up to 2 seconds.
Note
• We recommend using a tripod to avoid camera shake.
• The shutter remains open even after the flash fires. Ask
the subject not to move immediately after the flash has
fired, and then take the picture.
With the flash mode set to Auto,
the background of a night scene
may not be exposed correctly.
• Do not touch or move the camera again until the shutter
closes and the subject can be seen through the viewfinder
or the card access lamp starts blinking.
Selecting a flash mode (➞ 86)
With the flash mode set for Slow
Synchro, you can achieve correct
exposure of both the subject and
the background of a night scene.
Flash mode button
Main dial
Flash button
Control panel
61
Shooting Sunsets and Fireworks
By switching the white balance setting from Auto to a preset setting manually, you can
enhance the beauty of colors in a sunset or a fireworks display.
In the Auto white balance mode, white is used as
the base color for reference in reproducing the
colors of sunsets and fireworks, so the colors in a
sunset may not appear red and the colors in
fireworks may not appear as beautiful.
To improve the accuracy of color reproduction in
these cases, press and hold down the white
balance mode button
, turn the main dial or sub
dial until you see the number 5500 (clear daylight)
appear in the control panel, and then take the
picture.
Sunset does not appear red when
shot with white balance.
To increase the amount of red in the pictures, select
6500 (overcast daylight), or to reduce the amount of
red, select 3700 (incandescent bulb).
You can manually select one of the seven available
white balance settings to experiment and achieve
the artistic color effects that you desire in your
pictures.
Using Preset White Balance (➞ 102)
Sunset appears in more natural
red when shot with preset white
balance (5500).
If fireworks are difficult to focus, move the focus
mode switch to MF (manual focus), and then use
the focus ring to focus the shots.
Using Manual Focus (MF) (➞ 68)
Colors of fireworks can also
be adjusted with white
balance.
62
Taking Pictures:
4
Distance and Focus
In this section you will learn how to use both focusing methods:
autofocusing and manual focusing.
Using Autofocus (AF)
When autofocusing operates, the camera focuses the subject automatically. When the
subject is in focus, the AF correct mark in the viewfinder lights.
Set the focus mode switch to AF
(autofocus), as shown by the arrow
in the illustration on the left.
1
Look through the viewfinder and
point the camera to cover the
2
MF
subject with the AF target mark in
AF
the center of the viewfinder.
If you are using the monitor to compose
the picture, make sure that the subject is
centered in the monitor.
1
AF target mark
Focusing is conducted on the
Half-press the shutter button.
3
subject covered by this mark.
When the subject is in focus, the camera
beeps and the AF correct mark in the
lower left corner of the viewfinder lights.
When the AF correct mark blinks. (➞ 66)
Full-press the shutter button to
take the picture.
4
When the subject is in focus, the camera
beeps and the AF correct mark lights.
How autofocus operates
Infrared light emitted from AF port is used to estimate the approximate distance from the camera to
the subject. This information is used to roughly focus the image of the subject by moving the lens,
and then more precise focusing is conducted by the part of the CCD that receives the light from the
lens. When the subject is in focus, the AF correct mark in the viewfinder lights.
However, with some subjects, dark subjects or subjects of low contrast, the CCD may not operate
accurately, so focusing is conducted only with the infrared light emitted from the AF port. In this
case, the picture can be taken while the AF correct mark in the viewfinder is blinking.
With the macro mode mark
performed only with the CCD.
or conversion lens mark
displayed in the control panel, focusing is
AF port
The infrared light emitted here
meters the distance to the subject
(1st stage focusing).
1
CCD
Move the lens to a position for focus based on
the light passing through the lens (at 2nd
stage, the AF correct mark in the viewfinder
lights).
2
64
Focusing subjects not in the center of the viewfinder
The camera focuses on the subject covered by the AF target mark in the viewfinder. When you need
to focus on a subject that is not under the AF target mark in the center of the picture, point the
camera and cover the subject with the AF target mark in the viewfinder, half-press the shutter
button, and then while holding down the shutter button, compose the picture again.
Half-pressing and holding down the shutter button locks the focus.
4
AF target mark
Cover the subject with the AF
target mark in the viewfinder.
1
1
Half-press the shutter button.
2
When the subject is in focus, the camera
beeps and the AF correct mark in the
lower left corner of the viewfinder lights.
With the shutter button still half-
pressed, move the camera and
3
Half-press
2
compose the picture in the
viewfinder.
Full-press the shutter button.
3
4
Note
• To prevent interfering with the accuracy and
time required for focusing, never block this port
with your finger.
AF port
Full-press
4
65
Using Autofocus (AF) (continued)
Difficult to focus subjects
The autofocus feature of this camera is effective for most subjects. However, subjects like the ones
described below could be difficult to focus with the autofocus feature. If focusing with the CCD is not
successful, after you half-press the shutter button, the AF correct mark in the lower left corner of the
viewfinder blinks. You can still take a picture under this condition by full-pressing the shutter button.
For these situations, position the AF target
Subject of low contrast
mark in the viewfinder on an object that is at
the same distance from the camera as the
subject, and then half-press the shutter button
to lock the focus. While keeping your finger
half-pressed on the shutter button, frame the
picture that you want to shoot, and then full-
press the shutter button. (➞ 65)
A subject without
distinct patterns could
be difficult to focus.
You can also set the focus mode switch to the
MF mark to select manual focusing, and then
adjust the focus manually with the manual
focus ring. (➞ 68)
Subject with center glare
A subject with center
glare could be difficult to
focus.
Two objects at different distances
from the camera
The camera cannot
autofocus on a single
subject with two objects
at different distances
from the camera in the
viewfinder.
Subject in light from street lights
and windows
A subject at night in light
from street lights or from
building windows could
be difficult to focus.
66
Subject without vertical lines
The camera cannot
focus on a subject with
only horizontal lines.
Hold the camera
vertically, half-press the
shutter button, and then
hold it down to lock the
focus. Re-position the
camera horizontally,
4
compose the picture,
and then full-press the
shutter button to shoot
the picture.
Moving subject
It is impossible to hold a
fast moving object in the
center of the viewfinder
long enough for
automatic focusing, so
lock the focus on an
object that is at the
same distance from the
camera as the subject
you want to shoot, wait
for the subject to
appear, and then shoot
the picture.
Taking a picture through window
When taking a picture through window, the
subject could be difficult to focus. If this problem
occurs, set the focus mode switch to MF
(manual focus) and focus the subject manually.
67
Using Manual Focus (MF)
By setting the camera in the manual focus mode, you can focus the subject manually
within the range 20 cm to ∞ (8 in. to ∞) by turning the manual focus ring.
Manual focus ring
Set the focus mode switch to MF
(manual focus), as shown by the
arrow in the illustration on the left.
1
2
The manual focus mark MF appears in the
upper right part of the control panel.
Turn the manual focus ring until
you see the subject focused in the
2
viewfinder or the monitor.
MF
AF
1
Monitor display (camera-
to-subject distance less
than 1 meter)
Monitor display (camera-
to-subject distance more
than 1 meter)
Control panel
MF (manual focus) mark
Camera-to-subject distance (distance for current focus)
Repeatedly pressing the
display on and off.
button switches the
Using the focus ring design
The manual focus mechanism of this camera reads the direction and distance the manual focus ring
is moved and drives the focusing lens with a small motor. Even when the camera-to-subject distance
displayed in the monitor is 20 cm (8 in.) or ∞ , the focus ring can be turned farther, but stops at
20 cm (8 in.) or ∞.
Note
• When the camera is set in the macro mode, if you set the focus mode switch to the MF position,
the camera is automatically released from the macro mode
.
68
Taking Pictures:
Brightness (Exposure)
(Aperture and Shutter Speed)
In this section we will show you how to adjust aperture and shutter
speed to achieve the best exposure in your pictures for normal or
special effects.
The camera uses the aperture value and shutter speed to determine
the brightness (exposure) of an image. The shutter speed determines
the length of time that the shutter remains open. With a large aperture
the image becomes brighter (a greater area of the lens is used to
increase the amount of light), but the depth of field becomes shorter,
causing objects closer and farther away from the camera to be out of
focus. Slower shutter speeds create brighter images but increase the
possibility of blurring the image as result of subject movement or
camera shake.
5
Setting the Shooting Mode
Select and set one of the four available shooting modes for the prevailing conditions or
the effect that you want to create in your pictures.
P (Program mode)
The camera automatically selects the best aperture value and shutter speed according to
the brightness of the subject.You can get great results by just pressing the shutter
button.
A (Aperture priority mode)
You can set the aperture while the camera automatically selects the correct shutter
speed according to the brightness of the subject. You can blur the background of a shot
by decreasing the aperture value. On the other hand, you can increase the aperture
value to ensure that subjects in the foreground and background are both focused.
S (Shutter priority mode)
You can set the shutter speed while the camera automatically selects the correct
aperture value according to the brightness of the subject. For a fast moving subject
select a fast shutter speed to freeze the subject for a sharp picture, or select a slow
shutter speed to create the effect of blurred movement.
M (Manual mode)
You can set the aperture and shutter speed manually to vary the appearance of the
picture as you desire to achieve special effects in your pictures. The exposure indicator
display in the viewfinder allows you to view and confirm the current exposure setting. In
the M mode you can also set the camera in the bulb mode for long exposures.
Set the mode dial to the
appropriate mark to select the
1
OFF
shooting mode.
ON
1
70
Aperture Values and Shutter Speeds
Selected Automatically in the P Mode
When the mode dial is set to P (Program mode) the camera automatically selects the
aperture value and shutter speed according to the brightness of the subject so you can
take the picture without adjusting the exposure.
5
Set the mode dial to P (Program
mode).
1
OFF
Take the picture.
ON
2
1
P (Program mode) aperture values and shutter speeds
With the camera set in the Program mode, a program automatically adjusts the aperture value and
shutter speed according to the brightness of the subject.
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
Ev
4
3
2
Aperture
F11
F8
1
0
F5.6
F4
-1
-2
F2.8
F2
TELE
çLäpÅiWIDEÅj
WIDE
F1.4
F1
8s 4s 2s 1s 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500
1/1000
Shutter speed
Adjusting the exposure
With the mode dial set to P (Program mode) the camera automatically selects the optimum
exposure, but if you want to make the picture brighter or darker, press exposure compensation
button
to use the exposure compensation feature.
Using Exposure Compensation (©©79)
71
Setting the Aperture Value
With the mode dial set to A (Aperture priority mode), you can select the aperture value
for your shots. Because adjusting the physical size of the aperture determines the
amount of light allowed to enter the camera through the lens, the aperture setting
expresses the actual size of the aperture. It is important to remember, however, that the
smaller the value of the aperture setting, the larger the diameter of the aperture, and
conversely, the larger the value of the aperture setting, the smaller the diameter of the
aperture.
Opening the aperture not only allows more light into the lens to compensate for low light
conditions but shortens the depth of field as well. Use a large aperture to focus only the
subject and blur the background when you want to shoot a portrait. On the other hand,
use a small aperture to focus both the subject and the background.
Large Aperture
Small Aperture
To focus the subject and blur
the background, select a
small aperture value for a
large aperture.
To focus the subject and the
background, select a large
aperture value for a small
aperture.
Fine adjustment of aperture and shutter speed
If the brightness is adjusted with fine adjustment of the aperture value, in some cases it may appear
that the shutter speed drive is not adjusting shutter speed. The displayed aperture value is the value
of the optical aperture, and the shutter speed is calculated based on the CCD’s sensitivity to the
brightness of the light to determine the optimum exposure. In order to achieve this, the aperture
value and shutter speed may occasionally appear not to be adjusting in fine increments and does
not indicate a malfunction of the camera.
Bright spots in the picture?
If you see extremely bright spots in your images caused by sunlight or reflected sunlight, this is a
phenomenon called “smear” which occasionally occurs with digital cameras that employ CCDs. To
avoid this problem, compose the picture again and try to eliminate the bright light, use a smaller
aperture, or use a Neutral Density filter.
72
Large
aperture
Small
aperture
Set the mode dial to A (Aperture
1
2
priority mode).
Turn the main dial or sub dial as
shown in the illustration to change
the aperture value.
2
OFF
ON
1
Turn the dial to adjust the aperture value
in 1/3 steps.
The aperture value you select is displayed
in the viewfinder and the control panel.
The range of aperture values available of
selection is determined by the current
zoom setting.
5
2
Aperture Range
Small
aperture
Max.WIDE
Max.TELE
2.0∼11
2.4∼11
Large
aperture
The shutter-speed indication blinks if the
camera cannot set the correct shutter
speed.
Viewfinder
Shutter speed indication is blinking,
and the indicated speed is fast?
The scene is too bright—the camera
cannot set the shutter speed fast enough
to expose the shot correctly. Correct the
problem by reducing the aperture size
(increasing the aperture value). If the
indication continues to blink, reduce the
ISO setting or use a Neutral Density filter.
Aperture value
As the aperture is
opened, the
aperture value
decreases. As
the aperture is
closed, the
Shutter speed indication is blinking,
and the indicated speed is slow?
The scene is too dark—the camera cannot
set the shutter speed slow enough to
expose the shot. Correct the problem by
widening the aperture (reducing the
aperture value). If the indication continues
to blink, raise the ISO setting or use the
flash.
Control panel
aperture value
increases.
Take the picture.
3
Note
• If you set the aperture value manually, that setting will remain in effect even after you switch to
another shooting or switch the camera off and on. If you set the camera in the shooting mode
again, the camera will return to the same aperture value. However, the camera does not retain
automatically selected aperture settings.
73
Setting the Shutter Speed
With the mode dial set to S (Shutter priority mode), you can set the shutter speed for the
movement of the subject and take a picture. For example, if you take a picture of an
athlete in motion you can freeze the subject for a sharp picture or show the subject
moving through an arc of blurred movement for artistic effect.
With a slow shutter speed you can also point the camera at a moving subject and move
the camera to achieve the effect of blurred motion.
Fast shutter speed
Slow shutter speed
A fast shutter speed can stop and
freeze the action of a moving
subject.
A slow shutter speed can show
the flow of the action of a
moving subject.
To prevent camera shake
Use a monopod or tripod to prevent camera shake. The possibility of camera shake spoiling a
picture increases greatly when you zoom in on a subject.
Caution
• The flash may not be effective with shutter speeds of 1/250 or faster.
• The shutter speed that you select manually remains set, even after you change to another
shooting mode or switch the camera off and on again. Even after changing the shooting mode and
switching back to the S mode, the previously selected shutter speed remains set. However, the
camera does not remember shutter speeds selected automatically.
74
Set the mode dial to S (Shutter
1
2
Slow
Fast
priority mode).
Turn the main dial or sub dial as
shown in the illustration to select a
shutter speed.
2
OFF
ON
1
For every movement of the dial, the
shutter speed is changed in 1/3 step
increments. You can select a shutter speed
within the range 1/640~2 sec. The
selected shutter speed is displayed in the
viewfinder and control panel.
5
2
The aperture value blinks if the camera
cannot set the required aperture size.
Fast
Aperture value is blinking, and the
value is at the maximum?
Slow
The scene is too bright—the camera
cannot make the aperture small enough to
expose the shot. Correct the problem by
setting a faster shutter speed. If the
indication continues to blink, reduce the
ISO setting or use a neutral density filter.
Viewfinder
Aperture value is blinking, and the
value is at the minimum?
The scene is too dark—the camera cannot
open the aperture wide enough to expose
the shot. Correct the problem by selecting
a slower shutter speed. If the indication
continues to blink, raise the ISO setting or
use the flash.
Take the picture.
3
Control panel
Shutter speed
Shutter speeds of less than 1
second are displayed only with the
denominator of the speed setting.
For example, the 1/200 sec.
selection is displayed as 200.
Shutter speeds of more than 1
second are displayed with a double-
quote mark ". For example, the 2
sec. selection is displayed as 2".
75
Selecting Aperture and Shutter Speed
Manually
With the mode dial set to M (Manual mode), you can manually select both the aperture
and the shutter speed. In this shooting mode, you can also set the camera in the bulb
mode for long exposures. However, please remember that bulb shutter release is limited
to 30 seconds. Exposure will end and the shutter will release after 30 seconds if you hold
down the shutter button longer than 30 seconds.
Slow
Fast
Set the mode dial to M (Manual
1
2
mode).
Shutter
speed
2
OFF
ON
1
Turn the main dial to select the
aperture value, and turn the sub
dial to select the shutter speed.
Every movement of the dial changes the
aperture value and shutter speed in 1/3
steps.
You can select the shutter speed within the
range 1/640~8 seconds (or select “bulb”).
If you select “bulb” then the shutter will
remain open for as long as you keep the
shutter button pressed down (to a
2
Aperture value
maximum of 30 seconds). This is called
the bulb shooting mode.
Small
aperture
Large
aperture
Note
• If you set the aperture value and shutter speed manually, that setting will remain in effect even
after you switch to another shooting mode or switch the camera off and on. If you set the camera
in the shooting mode again, the camera will return to the same aperture value and shutter speed.
76
Viewfinder
Exposure level
Turning the main dial to the right increases
the size of the aperture and moving it to
the left decreases the size of the aperture.
The selected exposure is displayed in the
exposure indicator in the viewfinder and
the control panel. A plus mark (+) means
the picture is overexposed, a minus mark
(−) means the picture is underexposed,
and ±0 means the picture is correctly
exposed.
5
Aperture value
When the picture is overexposed by more
than 3 steps, + blinks, or when the picture
is underexposed by more than 3 steps, −
blinks.
Exposure
level
Difference
between the
selected and
ideal
Shutter
speed
exposure
levels.
Take the picture.
3
Control panel
77
Selecting the Metering Method
Select the method to meter the brightness of the subject. Three metering methods are
available: digital ESP metering, center weighted averaging metering, and spot metering.
The camera is set for digital ESP metering when you purchased the camera.
Center
Center weighted
averaging
metering
weighted
Spot metering
area mark
averaging
metering area
Spot metering
Digital ESP metering
Meters the entire picture, yet
Concentrates on metering the
concentrates on metering light light on the area covered by
Meters the entire picture and
reads not only the light but the
brightness patterns as well to
determine the correct exposure
value.
in the center of the picture in
area three times the size of
the Spot metering area mark
(approximately 11% of the
viewfinder) to determine the
correct exposure value.
the spot meter in the center of
the viewfinder (1.2% of the
viewfinder) to determine the
correct exposure value.
While holding down the metering
1
1
mode button
on the top, left
side of the camera, turn the main
dial or sub dial until you see the
desired metering setting displayed
in the viewfinder or monitor.
Viewfinder display Control panel
Digital ESP metering
Center weighted averaging metering
Spot metering
Take the picutre.
2
Brightness of center and surrounding area different?
When there is a great difference in the level of brightness between the center of the picture and the
surrounding area, or when there is an object in the background brightly lit, digital ESP metering may
not be able to meter the scene correctly. In such a situation, switch to center weighted averaging
metering or spot metering, cover the subject with the metering mark and adjust the exposure
compensation and other settings to determine the correct exposure. For a dark subject in strong
backlighting, you can also use the flash.
78
Using Exposure Compensation
With the mode dial set to P (Program mode), A (Aperture priority mode), or S (Shutter
priority mode), you can press the exposure compensation
button to manually increase
or decrease the exposure automatically selected by the camera in order to create a
darker or brighter image. If you want to shoot a white subject and make it bright, you can
also use exposure compensation to capture the image just as it appears. Exposure
compensation can be adjusted in the range of ±3EV in 1/3EV steps.
5
Plus exposure
compensation
OFF
ON
1
Minus exposure
compensation
2
Set the mode dial to P, A, or S.
1
While pressing down the exposure
2
Plus
compensation
button, turn the
main dial or sub dial as shown in
the illustration.
Minus
The exposure compensation value is
displayed in the viewfinder and the control
panel.
Control panel
Viewfinder
Take the picture.
3
Note
• The exposure compensation setting remains
selected even after the camera is switched off
and on again. After you adjust exposure
compensation for a shooting session, you
must remember to set exposure compensation
to 0 again when you are finished.
Exposure compensation value
Adjusting the flash intensity
The flash intensity cannot be adjusted automatically, but it can be adjusted manually. (© 90)
79
AE Lock
Normally the camera automatically meters the focus and the exposure when you half-
press the shutter button and locks the AF (automatic focus) and AE (automatic exposure)
at the same time. However, you can lock the exposure by pressing the
before pressing the shutter button.
button
If you press the shutter button with the
and the exposure does not change.
button depressed, only AF is performed
Conversely, if you press the
button with the shutter button half-pressed, the focus
is fixed and you can adjust the exposure.
The exposure is held only as long as the
soon as the button is released.
button is depressed and released as
Point the camera at the subject for
which you want to set the
exposure.
1
2 3
Press the
button.
2
Keep the button pressed down. While the
button depressed, the exposure setting will
not change. When the exposure is locked,
the AEL mark appears in the viewfinder.
If you half-press the shutter button while
Viewfinder
holding down the
button, automatic
focus also operates.
With the
down, take the picture.
button still pressed
3
You can continue to take other pictures at
the same exposure, as long as you keep
the
button pressed down.
AEL displayed
Locked
exposure
When the shutter button is half-pressed
When you press the
is canceled and the exposure selected with the
button is released, then exposure changes as metered automatically with a half-press on the
shutter button.
button, the exposure setting selected by half-pressing the shutter button
button press is used. On the other hand, if the
80
Bracketing a Shot with Three Automatic
Exposures
With the mode dial set to P (Program mode), A (Aperture priority mode), or S (Shutter
priority mode), if you switch on autobracketing in the menu you can take three rapid
multiple exposures of the same picture with different (bracketed) exposure settings. One
shot will be taken at normal exposure, one shot at a lower exposure setting for a darker
picture, and one shot at a higher setting for a brighter picture.
5
Normal exposure picture
Lower exposure setting for a
darker picture
Higher setting for a brighter
picture
You can set up bracketing shots in 1/3EV, 2/3EV or 1EV full exposure step.
Press the menu button
.
1
The menu opens in the monitor.
On the arrow pad, press
to move the green highlight to the
mark.
or
2
3
4
1
On the arrow pad, press
move the green highlight to
FRAME.
to
2
On the arrow pad, press
select 3 to replace OFF.
and
3
4
Selecting the number of shots enables
autobracketing, and selecting OFF
disables autobracketing.
On the arrow pad, press
to
5
6
move the green highlight to the
mark.
On the arrow pad, press
or
repeatedly to select the step
setting for adjusting the three
autobracketing exposures.
5
6
Exposure can be adjusted in three steps:
1/3EV, 2/3EV, 1EV.
81
Bracketing a Shot with Three Automatic Exposures
(continued)
Press the
button.
7
This completes setting the camera for
autobracketing. In the control panel, you
will see BKT and the sequential mode
7
mark
displayed. This confirms that the
camera is set for both autobracketing and
shooting multiple exposures. (When
shooting in the single-frame mode, hold
down the drive button
main dial or sub dial until you do not see
the sequential mode mark
the control panel.)
and turn the
Control panel
Autobracket
setting mark
displayed in
Press the
menu.
button again to close the
Take the picture.
8
Sequential mode
Sequential mode selected
automatically when
When the camera is set in the sequential
mode, press the shutter button once to
shoot three rapid pictures with the
exposure setting varied automatically for
each shot.
autobracketing is selected.
When the camera is set in the single-
frame shooting mode, you must press the
button once to take each picture with the
exposure setting varied automatically for
each shot.
Note
• The autobracketing setting is disabled and cannot be used in the following cases:
- When the mode dial is set to M (Manual mode)
- When the flash button is pressed and the built-in flash is raised.
• The mode dial setting determines which features are changed during autobracketing.
P
A
S
Program mode. Shutter speed and aperture value adjusted.
Aperture priority mode. Shutter speed adjusted.
Shutter priority mode. Apeture adjusted.
• The shutter speed and aperture value display the adjusted exposure.
• If autobracketing (© 81) and exposure compensation (© 79) are selected together, then values
are calculated for both during shooting with autobracketing.
• If the camera is switched off suddenly during autobracket shooting, the camera will finish the
autobracketing shooting sequence after the camera is switched on again.
• Autobracketing will halt as soon as you release your finger from the shutter button and resume
shooting the remaining pictures after you press the shutter button again.
• With the camera set in autobracketing, you cannot select the self-timer mark , or the remote
control mark . To select these marks, release the camera from autobracketing with the menu.
• If you select autobracketing while the self-timer mode or the remote control mode is set, both
modes will be automatically released.
82
Changing the ISO Setting
The sensitivity can be adjusted with the ISO setting. This ISO setting is the equivalent of
the ISO settings performed with traditional SLR cameras which employ film. Three ISO
settings are available with this camera: 80, 160, and 320. Although you can increase the
sensitivity by raising the ISO setting to take pictures of dark subjects, this could cause
the pictures to appear grainy. To prevent poor exposure, we recommend leaving the ISO
setting set for AUTO or 80. With AUTO selected the camera can adjust the ISO setting
automatically only when the intensity of the flash is insufficient. (For most situations,
AUTO selects 80 for the ISO.)
5
Press the menu button
.
1
2
The menu opens in the monitor.
1
On the arrow pad, press
to move the green highlight to the
mark.
or
On the arrow pad, press
move the green highlight to AUTO,
80, 160, or 320.
to
3
4
2
Press the
setting.
button to select the
3
The green highlight returns to the ISO
mark
.
Press
button again to close the menu.
ISO is displayed in the control panel only
when any setting other than AUTO is
selected.
4
Displayed when setting
other than AUTO is selected
Control panel
83
84
Taking Pictures:
Using a Flash
In this section you will learn how to use the built-in flash and external
dedicated flash FL-40. The built-in and external flash can be used
separately or together. We also describe the limitations on using other
external flash units not designed exclusively for this camera.
Use the built-in flash to take pictures of subjects in low incident light or
dark subjects in strong backlight. To use the flash, you must first press
the flash button to raise the built-in flash unit.
When you see the flash mark blinking in the viewfinder, the flash is
charging. Wait for the mark to stop flashing before firing the flash again.
To prevent the deterioration of the flash unit from overheating, do not fire
the flash more than 30 times in succession, and allow the flash to cool
for 10 minutes or more after a long session. Keep the flash unit clean.
Continuously firing the flash with the flash unit unclean, could cause the
flash unit to deteriorate.
6
Selecting a Flash Mode
The flash mode selection determines how the flash is fired to achieve various effects.
Flash mode selections and features
Auto Flash
The camera automatically fires the flash at the appropriate intensity when shooting in dark
conditions or against strong backlighting. In dark environments, the camera fires the flash as
necessary to keep the shutter speed to 1/30 sec. or less (since exposures longer than 1/30 sec. are
likely to be spoiled by camera shake). When shooting against a backlight, the camera fires the flash
as necessary to adjust the brightness of the subject.
Slow Synchronization
When shooting a subject against an illuminated night scene with the flash, you may only capture the
subject and the background may turn out black. To capture the background as well in this situation,
you can select slow synchro for the flash control setting and adjust the shutter speed up to 2
seconds (for ISO 80) for the darkness of the background. However, if you use a slower shutter
speed we recommend that you mount the camera on a tripod and ask the subject to remain still
until the picture is taken. (At slow shutter speeds the picture could easily blur as a result of camera
shake or if the subject moves while the shutter is still open.) The camera is in the 1st-curtain mode
when
is not displayed, and the flash fires at the beginning of a slow shutter release.
is
The camera is in the 2nd-curtain mode when
displayed, and the flash fires at the end of a slow shutter release. In
the slow synchronization mode with 1st-curtain selected, for
example, if you were to photograph a moving car at night, the flash
would fire at the beginning of the slow shutter release and capture
the image of the car. In the picture you would see the headlights of
the car appearing to flow ahead of the car in the direction of travel
as only the headlights were captured for the remainder of the shutter
release. If you were to select 2nd-curtain for the same picture, the
flash would fire at the end of the slow shutter release and you would
see the tail lights trailing behind the car because the vehicle was
captured by the flash at the end of the slow shutter release. In order
to use slow shutter release effectively, first set the mode dial to S
(Shutter priority mode) and select a slow shutter speed.
Moving vehicle
photographed in 2nd-Curtain
mode, showing lights trailing
behind
86
Fill-in Flash
Use fill-in flash when you want the flash always to fire, regardless of the light conditions. For
example, if the subject’s face appears dark in front of strong backlighting, if a tree or other large
object is casting a shadow on the subject’s face, or when shooting under fluorescent or other
artificial lighting to achieve the best color reproduction, you should use the fill-in flash mode.
However, the flash could lose its effect when shooting a subject in extremely bright light. Use
exposure compensation or use spot metering to meter the light only on the part of the subject that
you want to shoot. (➞ 78)
Red-eye Reduction
To prevent the occurrence of the red-eye phenomenon in the eyes of photographed subjects, the
camera fires 10 short burst flashes to contract the pupils of the eyes before the main flash fires.
When you use this flash mode, there is a 1 second delay before the flash fires after full-pressing the
shutter button, so make sure that the camera is steady. Red-eye reduction may not always be
completely effective for the following reasons:
6
- The subject was not looking directly at the camera when the flash
fired.
- The subject was not looking at the camera when the preliminary
flashes fired.
- The subject was too far from the camera.
- Differences among subjects in their physical reactions to the
preliminary flashes.
Example of the red-eye
87
Selecting a Flash Mode
(continued)
To select the flash mode, press and hold down the flash mode button
and turn the
main dial or sub dial. Turn the main dial or sub dial to the right to display the available
settings in the order indicated by the arrow in the table below. (Turning either dial to the
left displays the settings opposite the direction of the arrow in the table.)
Flash control modes for the P (Program), A (Aperture priority) modes
Fires automatically
in dark light,
backlighted subject
Red-eye
Reduction
Always
fires
Control Panel Display
(None)
Flash mode
Auto flash
Flash Timimg
1st-curtain
1st-curtain
YES
YES
NO
NO
Auto flash
(Red-eye Reduction)
YES
NO
NO
NO
Slow synchro
(Red-eye Reduction)
1st-curtain
1st-curtain
YES
NO
YES
YES
Slow synchro
Slow synchro
(2nd Curtain)
NO
NO
2nd-curtain
1st-curtain
YES
NO
NO
Fill-in flash
YES
Flash control modes for the S (Shutter priority), M (Manual) modes
Fires automatically
in dark light,
backlighted subject
Red-eye
Always
fires
Control Panel Display
Flash mode
Flash Timimg
1st-curtain
Reduction
Fill-in flash
(Red-eye Reduction)
YES
NO
YES
Fill-in flash
NO
NO
2nd-curtain
1st-curtain
NO
NO
YES
YES
(2nd Curtain)
Fill-in flash
Note
• If the flash mode is set in the S or M shooting
mode and then the mode dial is reset to P or
A, the flash mode settings change as shown
below.
• If the flash mode is set in the P or A shooting
mode and then the mode dial is reset to S or
M, the flash mode settings change as shown
below.
Original Setting
Changes To:
Original Setting
Changes To:
AUTO
Fill-in
Fill-in
Fill-in
Fill-in
Slow Synchro
Fill-in (2nd Curtain)
Slow Synchro (2nd Curtain)
AUTO (Red-eye Reduction)
Slow Synchro (2nd Curtain)
AUTO (Red-eye Reduction)
Slow Synchro (Red-eye Reduction)
Fill-in
Fill-in (2nd Curtain)
Fill-in (Red-eye Reduction)
Fill-in (Red-eye Reduction)
Fill-in
Fill-in (Red-eye Reduction)
88
Press the flash button
.
1
2
2
The built-in flash opens.
If the built-in flash is not raised, the flash
mode remains set at OFF and cannot be
changed.
Press and hold down the flash
mode button , and then turn the
main dial or the sub dial. Continue
to turn the dial until you see the
desired combination of flash
control setting marks, and then
stop turning the dial.
1
6
Take the picture.
3
When the flash is not required
When you do not want to use the flash, for
example when photographing subjects as a
sunset or night scene, shooting a subject that
the flash will not reach, or shooting a subject in
a location where flash photography is not
allowed (such as in a museum), just press down
the built-in flash to close it. If an external flash
unit is connected to the camera, switch it off or
remove it. (Some external flash units may
require removal and others may not; you can
just switch them off.)
89
Using Flash Control Compensation
The camera can automatically adjust the flash intensity according to the brightness of
the subject, light reflected from the subject, and the camera-to-subject distance, and
because of this the image of a subject could appear too bright or too dark. In such cases
you can use flash control compensation to capture images that are not too bright or too
dark. Flash control may not have enough effect when using a high shutter speed.
Press the menu button
.
1
2
The menu opens in the monitor.
On the arrow pad, press
to move the green highlight to the
mark.
or
1
On the arrow pad, press
move the green highlight to the
scale to the right of the flash
to
3
4
control mark
.
2
To increase or decrease the flash
intensity, press
or
.
Every time you press
or , the flash
compensation value changes in 1/3EV
steps through a range of −2EV to +2EV.
3
4
90
Press the
button.
5
6
The green highlight returns to the flash
control mark and the setting is stored.
When any value other than zero (0) is
selected, the flash control mark is
displayed in the control panel. Please
remember that this setting is retained even
after the camera is switched off and
switched on again.
5
To release this setting, reset the value for
zero.
6
Displayed only when an
exposure value other
than 0 is selected.
Press the
menu.
button again to close the
Take the picture.
To use the dedicated external flash
and built-in flash together
When the dedicated external flash is mounted
on the camera, the camera automatically sets
the flash for TTL-AUTO. With this setting, the
camera can adjust the intensity of the flash fired
from the dedicated flash, just as it automatically
adjusts the flash intensity for the built-in flash. If
you set the dedicated flash for MANUAL, this
disables automatic adjustment of the flash
intensity only for the dedicated external flash;
the intensity of the built-in flash will continue to
be controlled by the camera.
Control panel
91
Using the Optional Dedicated External
Flash FL-40
The dedicated external flash FL-40 increases the amount of light and can illuminate
subjects which are beyond the range of the built-in flash.You can also use the dedicated
external flash to bounce light onto the subject from another direction, allowing more
variety in the use of lighting. The dedicated external flash can be mounted on the hot
shoe on top of the camera or mounted on the optional flash bracket attachment. With the
dedicated external flash, you can use flash control compensation and select the flash
mode, just like you can with the built-in flash. (➞ 90)
To use only the dedicated external flash
If you want to use only the dedicated external flash, just push down the built-in flash.
To use the dedicated external flash and built-in flash together
With the built-in flash you can also use the dedicated external flash to bounce light onto the subject
to create a catch-light effect to light the eyes of the subject more naturally. When the built-in flash
and external flash are used together, the built-in flash provides about half of the light emitted from
the dedicated external flash. When you use the external flash to bounce light onto a subject, in
some cases the intensity of the external flash could be insufficient, even with the range for flash
shooting, please remember that you may not be able to achieve the correct exposure.
To set the flash mode for the FL-40
When the dedicated external flash is mounted on the camera,
the camera automatically sets the flash for TTL-AUTO, and the
intensity of the dedicated external flash can be controlled from
the camera. With the mode dial set to M (Manual mode), you
can select MANUAL on the dedicated external flash. This allows
you to set the guide number on the dedicated external flash,
and select the aperture on the camera for taking a picture.
Shooting
Mode
Dedicated External
Flash Mode
P
A
S
TTL-AUTO only
TTL-AUTO,
MANUAL
M
92
Remove the hot shoe cover from
the camera and attach the FL-40
external flash unit.
1
OFF
ON
1
Slide the hot shoe cover toward the back
of the camera. Attach the dedicated
external flash unit to the hot shoe. For
details about attachment, refer to the
dedicated external flash FL-40 instructions.
Store the hot shoe cover in a safe location
where you will not lose it, so you can re-
attach it later after removing the external
flash unit.
6
Warning
Hot shoe cover
• The dedicated external flash unit could fire
accidentally when it is connected with the
camera or dedicated external flash unit
switched on.
Switch on the dedicated external
flash unit.
2
2
If you intend to use the external dedicated
flash with the built-in flash, press the flash
button
to raise the built-in flash. When
you do not want to use the built-in flash,
just press it down to close it.
Select the flash mode. (➞ 86)
3
4
Take the picture.
Back of FL-40 dedicated
external flash unit
Using the flash with close-up
photography
Mode button
Shooting a subject 1.5 meters (approx. 4.9 ft.)
from the camera or closer, could cause the
pictures to be too bright or cause dark shadows.
If you experience these problems with the
external flash, adjust flash intensity on the
external flash unit, or use only the built-in flash.
∼
Preventing the dedicated external
flash from firing
To prevent the dedicated external flash from
firing, just switch it off.
93
Using Other Flash Units with the Camera
An external flash unit not designed for this camera can be connected to either the hot
shoe or the synchro socket on the left side of the camera and used, provided that it
meets the conditions described below. However, please remember that a generic
external flash unit, unlike the dedicated FL-40 flash unit, cannot be used to control the
intensity of the flash.
Requirements for other flash units used with this camera
1. Use a flash unit with an angle of illumination wider than the range of the camera.
The focal length of this camera is 35 mm~140 mm (1.3 in.~5.6 in.), calculated based on 35 mm
film, and requires that the angle of illumination be wider than the focal length used. In order to
use the full focal length area, over 35 mm is required. In order to bring into use the remaining
portion of the illumination area, use an external flash with a wide adapter.
2. When using full flash, set the flash timing shorter than 5ms.
With a ring flash, or other flash unit with long flash duration, the shutter may close during the
flash and part of the light might not be used in the exposure.
3. Do not attempt to any flash unit (other than the FL-40) which employs electronic flash
control between the flash unit and the camera.
Setting a non-dedicated flash unit
1. Using auto flash (controlled by the external flash)
The intensity of the flash must be adjusted with the controls on the flash unit. The f/stop and ISO
settings on the flash unit must match these settings on the camera. Depending on the shooting
conditions, you may not be able to achieve satisfactory exposure. In this case, you will have to
adjust the aperture values and ISO settings on both the camera and the external flash unit. Flash
control settings performed on the camera are ignored by the flash unit.
2. If you want to set the guide number on the external flash, calculate the aperture value
from the guide number, camera-to-subject distance, and the ISO setting.
Cautions about using external flash units other than the FL-40
Even when
is displayed, an external flash not designed for this camera may fire for every shot. If
you do not want the flash to fire, switch if off. If the flash continues to fire after the flash is switched
off, disconnect the flash from the camera. Further, the intensity of such a flash must be controlled by
adjustments on the external flash unit. The results in your pictures could differ, depending on the
shooting conditions, type of external flash unit used, and the camera settings. Please understand
that we cannot guarantee the performance of the camera and picture quality when a flash unit not
designed for this camera is used.
94
Using a non-dedicated flash unit
Hot shoe
An external flash can be attached
to the camera at the hot shoe or at
the flash synchro socket.
1
Set the mode dial to M (Manual
2
3
mode).
Select the shutter speed and aperture
value. Selecting a slow shutter speed
increases the possibility of camera shake.
6
On the flash unit select AUTO, and
then set the same aperture and ISO
settings selected on the camera.
Flash synchro socket
For some shots you may not be able to
achieve the correct exposure. If this
occurs, then you can experiment with
different aperture and ISO settings on the
external flash unit. (In this situation, the
flash control mode setting on the camera
is disabled.)
95
96
Taking Pictures:
Color and Quality
In this section we will show you how to set up white balance, select the
record mode for images saved on the memory card, and how to use the
sharpness, contrast, and histogram options to enhance your captured
images.
There can be great differences in the way the camera reproduces color
in images taken in natural or artificial light, especially under fluorescent
lights. In such cases, you may need to adjust the white balance setting
of the camera in order to achieve the best natural color reproduction in
pictures taken indoors under incandescent or fluorescent lighting.
You can select a record mode best suited for your purpose.You can
select a high quality setting to produce the best quality image possible,
resulting in a larger file size but reducing the number of images that you
can save on a card. If your aim is to store more images on a card, or to
store as many images as possible on a card, you can select a lower
quality setting which will compress the images into smaller file sizes,
allowing you to store more images on a single card.
7
You can use the sharpness, contrast, and histogram options to enhance
the appearance of your images as they are taken.
Achieving Natural Color (White Balance)
The source of incident light on the subject affects color. For example, the same sheet of
white paper held under sunlight may appear tinged with red when held under an
incandescent light. Because the human eye adapts to the colors of source light, it
perceives the sheet as white in both cases. White balance adjustment attempts to
reproduce colors naturally so images are not affected by surrounding light. With a
camera that uses film, you could purchase film suited for reproducing color under
different light sources and adapt to shooting conditions by using filters. Similarly, with a
digital camera you have the option of adjusting the white balance.
There are three ways to adjust white balance with this camera.
Auto white balance
The camera automatically determines the amount of white light and adjusts the color balance. Auto
white balancing is sufficient for most conditions, but if there is no near white color in the picture,
colors that are not originally white may appear white in the image and the white balance of the
image may not be correct. In such a case, use a white surface and quick reference white balance to
achieve the correct white balance, or use preset white balance to select a color temperature for the
incident light to achieve the correct white balance.
Quick reference white balance
You select an object like a white wall or a piece of white paper to be used as the white base to
balance color in your picture before shooting. Just point the camera at a sheet of white paper and
press the white balance mode button
to set the white base for balancing color in the picture. The
setting that you capture is saved as a “preset” white balance setting and recorded in the camera's
color temperature selections.
Preset white balance
You select a color temperature setting appropriate for the light source. For example, use preset
white balancing when you want to reproduce more red in a picture of a sunset, or capture a warmer
artistic effect under artificial lighting. By experimenting with different preset white balancing settings,
you can achieve a variety of pleasing color effects in your pictures.
98
Preset white balance settings and color temperature
The spectral balance of different white light sources is rated numerically by color temperature—a
concept of physics that, with incandescent lighting, corresponds roughly to the absolute filament
temperature of an incandescent lamp, expressed on the Kelvin (K) temperature scale. The higher
the color temperature, the richer the light in bluish and the poorer in reddish; the lower the color
temperature, the richer the light in reddish and the poorer in bluish. It follows then that the color
temperatures of fluorescent lights are unsuitable artificial light sources. There are gaps in the hues
from the color temperatures of fluorescent light. If these differences in hue are small, they can be
calculated with color temperature and this is called correlative color temperature. The 4000K and
4500K preset settings in this camera are correlative color temperature, and should not be
considered strictly as color temperature values. Use for shooting sessions under fluorescent lights.
More Red
3000
More Blue
5000 6000
7
[K]
8000
2000
4000
White balance with a flash
We recommend using the auto white balancing with the flash. If you intend to use preset white
balancing, select 6500K for the color temperature.
When shooting with the flash, always play back your pictures and check the results. Various
conditions can affect color temperature and how color is reproduced in your pictures.
Monitor display
The specified white balance setting is applied to the image displayed in the monitor.
Note
• The scale indicates the approximate color temperature for each light source. (One can only say
that actual sunlight is about 5500K, and fluorescent lights about 4000K.)
99
Using White Balance
With the camera in the auto white balance mode, the camera automatically registers the
whitest part of the subject framed in the viewfinder and uses this as a base to balance
other colors in the picture.
Auto white balance mode
not selected
1
2
Control panel
Viewfinder
Press and hold down the white
1
balance mode button
, and then
turn the main dial or sub dial.
When you see -A- in the viewfinder
and control panel, or AUTO WB in
the monitor, stop turning the main
dial or sub dial.
Control panel
Viewfinder
Take the picture.
2
Monitor
When the white balance button
released
is
Control panel
Viewfinder
100
Using Quick Reference White Balance
Before you take a picture, point the camera at a white sheet of paper or other white
surface, and then register and lock the white balance reference at the touch of a button.
button
Under the same light source where
1
you intend to take the picture,
point the camera at a flat sheet of
paper.
Fill the viewfinder with the white surface.
Position the white surface facing the light
2
7
source to eliminate all shadows.
1
Press the quick reference white
2
balance button
.
If the camera can successfully register the
surface of the sheet as white balance
reference, you will see GOOD displayed in
the monitor with the image of the sheet. If
you see NO GOOD, this means not
enough white surface was available, the
white surface reflected too much light, the
surface was too dark, or color around the
borders of the sheet interfered with the
registration.
White surface
(paper, wall, etc.)
Press the
the monitor appear natural.
button if the colors in
3
After you press the
button, the white
balance reference is registered. If you
want to cancel registration, press the
3
menu button
or press the monitor
button and repeat from step 1.
Point and shoot the picture.
4
Note
Monitor
Control panel
• The white balance setting that you have just
captured writes over the previous setting and
is saved as one of the preset white balance
settings. The new setting is recorded and
retained even after the camera is switched off
and switched on again.
101
Using Preset White Balance
Use preset white balance to select the color temperature (measured on the Kelvin
temperature scale “K”) for the light source. (➞ 99)
Control Panel
Display
Color Temperature
Monitor
Display Comment
The camera selects the whitest portion of the picture
framed in the viewfinder. Used for most scenes.
AUTO, -A-
3000K
3700K
4000K
4500K
5500K
6500K
7500K
Select to shoot under incandescent light.
Select to shoot under incandescent light to
preserve the mood of the lighting.
Select to shoot under white fluorescent lighting.
Select to shoot in daylight with white fluorescent
lighting.
Select to shoot outdoors on a clear day, to shoot
sunsets in red, or to shoot fireworks displays.
Select to shoot outdoors on a cloudy day.
Select to shoot outdoors in the shadows on a clear
day.
Quick reference
white balance
default setting:
5500K
(➞ 101)
button
1
Press and hold down the white
1
balance mode button
, and then
turn the main dial or the sub dial.
The setting is displayed in the shutter
speed display area of the control panel
and viewfinder. The image adjusted with
the displayed color temperature appears in
the monitor.
Color
“--” displayed for correlative Color
temperature
temperature color temperature
When you see the color
2
3
temperature setting you desire in
the control panel or viewfinder,
stop turning the dial.
Control panel
Monitor
The WB mark appears in the control panel
and the viewfinder.
Displayed for white balance
settings other than AUTO
Take the picture.
Control panel
Viewfinder
102
Selecting Image Quality, Resolution, and
Compression
You can set the record mode which determines the quality of the images of the pictures
that you take.
Quality (Record mode)
Four image quality settings are available, and in ascending order of quality, they are: SQ (Standard
Quality), HQ (High Quality), SHQ (Super High Quality), and TIFF (Tagged Image File Format). (See
Table below.) The higher the quality, the larger the file size, and fewer pictures can be stored on the
memory card. The lower the quality, the smaller the file size, and more pictures can be stored on the
memory card. (➞ 34) You can also adjust the resolution and compression settings for each quality
setting. (➞ 104)
7
Record mode button
Press and hold down the record
mode button , and then turn the
main dial or sub dial until you see
the desired quality setting in the
control panel.
1
1
Quality
TIFF
SHQ
HQ
Resolution
Compression
Approx. 1:1
Approx. 1:2.7
Approx. 1:8
Approx. 1:8
2240 x 1680 pixels
2240 x 1680 pixels
2240 x 1680 pixels
1280 x 960 pixels
SQ
Quality settings
The abbreviations for the quality settings
translate as follows: TIFF (Tagged Image File
Format), SHQ (Super High Quality), HQ (High
Quality), and SQ (Standard Quality).
Control panel
103
Selecting Image Quality, Resolution, and Compression
(continued)
Setting resolution and compression
You can change the resolution and compressions settings for each of the four quality settings.
The resolution and compression settings for each quality setting can be adjusted within the following
ranges.
Quality
TIFF
Resolution
Compression
2240 x 1680 pixels (FULL) 1:1 (non-compressed)
(non-adjustable)
(non-adjustable)
2240 x 1680 pixels (FULL)
1600 x 1200 pixels (HALF)
1280 x 960 pixels (SXGA)
1024 x 768 pixels (XGA)
640 x 480 pixels (VGA)
SHQ
HQ
Approx. 1:2.7
Approx. 1:4
Approx. 1:8
SQ
Resolution
Images created from pictures taken with a digital camera are composed of vertical and horizontal
colored dots called pixels. In the notation 2240 x 1680, for example, 2240 is the number of
horizontal pixels and 1680 is the number of vertical pixels. The greater the number of pixels in an
image, the finer the quality and the larger the file size. Please remember that high quality images
require more storage space on a memory card, thus reducing the number of images that can be
stored on the card. Select as high a resolution as possible if you intend to trim the image, or enlarge
the image larger than standard service size for printing.
Compression
The compression rate denotes the amount of JPEG compression. The higher the compression rate,
the smaller the file size. However, the higher the compression rate, the more the image could
deteriorate. With compression rates below 1:8 the amount of image deterioration is not noticeable,
but if you are concerned about image quality then select a smaller compression rate like 1:4 or
1:2.7. The effect of the selected rate of compression could vary with the content of the image. These
numbers provide only a general scale for reference and are not precise measurements.
The table below describes the relationship between resolution, compression and approximate file
size.
Compression
1:1
1:2.7
1:4
1:8
Resolution
2240 x 1680
11.3MB* 2.8MB
2MB
1MB
1MB
1600 x 1200
−
−
−
−
1.5MB
510KB
1280 x 960 (SXGA)
1024 x 768 (XGA)
640 x 480 (VGA)
940KB 650KB 340KB
610KB 420KB 230KB
260KB 180KB 110KB
* All MB/KB file sizes are approximate estimations.
Note
• Less time is required to store smaller files on a memory card, with the exception of the 640 x 480
(VGA) selection which could require more time for compression as the file is saved.
104
Press the menu button
.
1
2
2
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
quality mark
.
On the arrow pad, press
move the green highlight to the
quality name.
to
3
4
5
6
On the arrow pad, press
until you see the name of the
desired quality setting displayed.
or
7
3
4
On the arrow pad, press
move the green highlight to the
resolution.
to
On the arrow pad, press
to select the desired resolution
setting.
or
On the arrow pad, press
move the green highlight to the
compression setting.
to
7
6
8
If you do not want to change the
compression setting, go to Step 9.
5
On the arrow pad, press
or
8
9
to select the compression setting.
Press the
setting.
button to select the
The green highlight returns to the quality
7
mark
.
Press
button again to close the menu.
1
9
105
Selecting Sharpness
Three settings are available for adjusting sharpness: HARD, NORMAL, and SOFT. HARD
sharpens the contrast at color borders to maximize the clarity of the image.
NORMAL
Enabled when you purchase the camera. Defines borders to achieve best
focus for printing the image.
HARD
SOFT
Greatly enhances and sharpens borders.
Softens borders slightly and is ideal for images that you intend to process
with a computer graphics software application.
Press the menu button
.
1
2
1
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
sharp option mark
.
On the arrow pad, press
move the green highlight to HARD,
NORMAL, or SOFT.
to
3
2
The
mark is displayed in the control
panel when a setting other than NORMAL
is selected.
Press the
setting.
button to select the
4
The green highlight returns to the sharp
option mark
Press button again to close the menu.
.
3
Control panel
Note
• Selecting HARD could cause the image to
appear rough.
4
106
Selecting the Contrast
The contrast option allows you to adjust the amount of gradation between areas of
different brightness in the image. Three settings are available: HIGH, NORMAL, and
LOW.
HIGH
Creates a starkly contrasted image. Light areas may wash out white and
darker areas may turn black, creating a reverse film (slide film) effect.
(However, bright areas could easily wash out or dark areas turn black.)
Achieves medium gradation for a natural appearance. Best selection for
most pictures.
NORMAL
LOW
Achieves low contrast, ideal for images that you intend to process with a
graphics software application on a computer.
7
Press the menu button
.
1
2
1
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
contrast mark
.
On the arrow pad, press
move the green highlight to HIGH,
NORMAL, or LOW.
to
3
2
The
mark is displayed in the control
panel when a setting other than NORMAL
is selected.
Press the
setting.
button to select the
4
The green highlight returns to the contrast
mark
.
Press
button again to close the menu.
3
Control panel
4
107
Displaying the Histogram
A histogram can display the distribution of brightness of the image displayed for
playback. The histogram feature is switched on with a menu selection.
Switching the histogram display on and off
Follow this procedure to switch the histogram display on or off.
Set the mode dial to the setup/
1
connection mode mark
.
OFF
ON
1
2
Press the menu button
.
2
3
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
histogram mark
.
On the arrow pad, press
move the green highlight to the
right.
to
4
5
3
On the arrow pad, press
move the green highlight to ON.
to
If you want to switch off the histogram, just
leave OFF selected.
Press the
setting.
button to select the
6
The green highlight returns to the
histogram mark
Press button again to close the menu.
.
4
5
Note
• If the camera is connected to a computer with
a USB cable, the menu is not displayed.
Disconnect the USB cable from the camera.
6
108
To display the histogram during playback
During playback you can display a histogram, a bar graph which illustrates the brightness of the
displayed image so you can determine how to adjust exposure compensation. The horizontal axis of
the histogram represents the brightness of the image, on a scale of 0~255 (reading from left to
right), and the vertical axis measures the number of pixels for each bar. If the graph shows
brightness heavily weighted on the right side of the scale (portions of the image could wash out),
set exposure compensation to a minus value for a darker image. If darkness is heavily weighted on
the left side of the scale (portions of the image could turn black), set exposure compensation to
positive value for a brighter image.
Set the mode dial to the playback
1
mode
.
OFF
ON
7
The image of the most recent picture and
the histogram are displayed in the monitor.
If the histogram option is switched off in
the menu, the histogram does not appear.
With the mode dial set to P, A, S, or M ,
you can also enter the playback mode by
rapidly pressing the monitor button
twice.
1
2
Press the INFO button
repeatedly to switch the histogram
off and on.
2
Histogram
The histogram cannot be displayed with
the image information. Continuously
pressing the
button alternately
switches the histogram display on and off.
Number
of pixels
To adjust exposure compensation
while viewing the histogram
The exposure (exposure compensation,
aperture, shutter speed) cannot be adjusted
with the camera in the playback mode.
• With the mode dial set to P, A, S, or M, press
Brightness
0
255
(Bright)
(Dark)
the monitor button
to set the camera in
the shooting mode. With the camera in the
shooting mode, you can adjust exposure
compensation, aperture, and shutter speed.
• If the mode dial is set to playback
, reset it
to P, A, S, or M.
Note
• The histogram cannot be displayed during the index display or for an image as it is stored
immediately after it is taken. Please note that the histogram for an enlarged image illustrates the
brightness of the entire image, not of the currently displayed part.
109
110
Taking Pictures:
Special Features
In this section we will describe some other important camera features.
• Taking multiple exposures. With one press on the shutter button,
you can shoot up to 4 rapid exposures in the sequential mode.
• Self-timer. In order to delay the shutter release, you can set the self-
timer so the camera fires 12 seconds after pressing the shutter button
so you can include yourself in the picture.
• Remote shutter release. You can use the electronic remote unit RM-
1 to release the shutter from in front of the camera, or use the remote
cable RM-CB1 attached to the camera to release the shutter without
manually pressing the shutter release and avoid camera shake during
a slow shutter release.
• Time-lapse photography. With the camera in the time-lapse mode,
you can set the camera to take pictures at any specified interval from
1 minute up to 24 hours in units of 1 minute.
• Memory card selection. With a SmartMedia and CompactFlash card
installed in the camera, you can select either card for storing images.
After one card fills up, just select the other card so you can continue
shooting.
• Shutter release sound. You can set the camera to emit a sound at
shutter release, or switch this feature off.
• Warning beep. You can set the camera to emit a beep to alert you
that a task has been completed (autofocus, exposure compensation
lock, etc.) or you can switch this feature off.
8
• Image display time. You can set the amount of time each picture is
displayed on the monitor while it is being saved on the memory card.
• Setting the date and time. You can set the current date and time for
images taken.
• Sleep mode. You can set the amount of time the camera remains idle
before it powers down and enters the sleep mode. If the camera
remains in the sleep mode for over one hour, it will power itself off
automatically. These features are designed to conserve battery power.
• Reset. With a simple procedure, you can restore most camera
settings to their factory default settings. (The defaults are the camera
settings in effect when you purchased the camera.)
• RAW mode. Stores images on the card as raw data which is neither
compressed nor enhanced by any camera feature such as sharpness,
contrast, etc.
• Conversion lens setting. Shows you how to set up camera operation
with an optional conversion lens mounted over the camera lens. For
details about optional conversion lenses available for this camera, see
Appendix 2: Available Options.
Taking Multiple Exposures
With the camera in the sequential mode, press and hold down the shutter button to take
four rapid shots.
Set the mode dial to P, A, S, or M.
1
2
Press and hold down the drive
button
, and then turn the main
dial or sub dial until you see the
sequential mode mark
in the control panel.
appear
1
Take the picture.
3
OFF
ON
3
2
The camera will continue to shoot
exposures as long as you hold down the
shutter button. The camera will stop
shooting if you lift your finger from the
shutter button. The number of multiple
exposures is displayed in the control
panel.
Control panel
Number of storable pictures
Sequential mode
mark
Number of multiple exposures
(Gauge shows 3 exposures)
Camera will not shoot after pressing shutter button?
blinking in the viewfinder?
If this mark is blinking, the built-in flash is charging. Wait for the mark to stop
flashing. After the flash is charged, the flash mark
on.
will light and remain
and number of storable pictures blinking?
If the card error and the number of storable pictures is blinking, this means
the memory card is full. Replace the full card with another card, or delete
pictures from the full card that are no longer needed.
112
Using the Self-Timer
With the self-timer set, the shutter release will be delayed for 12 seconds after you
press the shutter button.
Set the mode dial to P, A, S, or M.
1
2
Press and hold down the drive
OFF
ON
1
button
, and then turn the main
dial or the sub dial until you see
the self-timer mark appear in the
control panel.
2
Eyepiece
shutter lever
Attach the camera securely to a
tripod, adjust the focus, and
compose the picture in the
viewfinder.
3
4
8
4
Half-press the shutter button to focus the
shot. If the subject is not yet composed in
the center of the viewfinder, you can use
focus lock. (➞ 65)
Pull down the eyepiece shutter
lever to prevent light entering the
viewfinder from behind the camera.
Self-timer mode
mark
Pull down the eyepiece shutter lever on
the left of the viewfinder.
5
Light entering the viewfinder from behind
the camera could wash out the picture with
white light.
Self-timer lamp
After pressing the shutter
button, the self-timer
lamp lights for 10
seconds, blinks for 2
seconds, and then the
shutter releases.
Full-press the shutter button.
5
The remote control receiver/self-timer
lamp on the front of the camera lights for
10 seconds, blinks for 2 seconds, and then
the shutter releases.
After you take the picture, the camera
remains in the self-timer mode. To release
the camera from the self-timer mode,
switch the camera off and switch it on
again.
To cancel self-timer mode
If you want to cancel the shot, press the drive button
, before the shutter releases. If you want to
cancel the self-timer mode, select any mark other than the self-timer mark , or just switch the
camera off and on again.
Note
• Remember that the camera performs autofocusing when you press the shutter button, so to avoid
ruining the focus of the picture never stand in front of the camera when you half-press and then
full-press the shutter button.
113
Using the Camera Remote Unit RM-1
With the camera in the remote mode, you can release the shutter with the electronic
remote unit RM-1 while standing in front of the camera. The shutter will release 2
seconds after pressing the transmit button on the remote unit.
Set the mode dial to P, A, S, or M.
1
2
Press and hold down the drive
OFF
ON
button
, and then turn the main
1
dial or the sub dial until you see
the remote control mark appear in
the control panel.
2
Mount the camera on a tripod and
compose the picture.
3
4
4
If the subject is not yet composed in the
center of the viewfinder, you can use focus
lock. (➞ 65) If you are going to include
yourself in the picture, focus on the area
where you intend to appear in the picture.
Eyepiece
shutter lever
Pull down the eyepiece shutter
lever to prevent light entering the
viewfinder from behind the camera.
Pull down the eyepiece shutter lever on
the left of the viewfinder.
Light entering the viewfinder from behind
the camera could wash out the picture with
white light.
Remote control
mark
Working range of the remote unit
Use the remote in front of the camera within the range of distances and angles shown below. The
following elements could narrow the working range of the remote/self-timer sensor: direct sunlight or
any other strong light source, fluorescent light, or any device emitting electrical or radio waves.
W
T
Camera
Approx. 5m (16.6 ft.) (indoor)
15°
Approx. 3m (10 ft.) (outdoor) 15°
Remote unit
114
Point the remote unit at the front of
the camera and press the transmit
button on the remote unit.
5
5
The remote control receiver on the front of
the camera blinks for 2 seconds and then
the shutter releases.
Remote control
receiver/self-timer
lamp
To take more pictures, just press the
transmit button on the remote unit.
8
After pressing remote transmit button shutter did not release?
• Remote batteries low?
The remote batteries have a service life of about 5 years, although this could be shorter
depending on how and where the remote is used.
• Are you using the remote within its working range?
• Is strong light striking the remote control receiver/self-timer lamp on the front of
the camera?
• Remote channel correct?
For details, refer to the remote unit instructions.
To take a picture with the shutter button
You can take a picture by pressing the shutter button even with the remote control mark displayed
in the control panel.
Remote mode focusing
There may be occasions when you need know whether or not the shutter has released with the
remote under bright light conditions. In such a case, raise the built-in flash, select fill-in flash for the
flash control setting, and fire the flash to take the picture.
To cancel remote mode
Press and hold down the driver button
, and then turn the main dial or sub dial to switch off the
remote control mark by selecting any other setting.You can also cancel the remote control mode
by just switching the camera off and on again.
Warning
Store the remote unit in a safe location away from small children. If a child accidentally swallows the
remote unit, seek medial assistance immediately. Never attempt to disassemble the remote, subject
it to heat, or attempt to incinerate it.
115
Using the Remote Cable RM-CB1
(Optional)
When you are shooting in the macro, TELE, or bulb mode with a slow shutter speed, you
can mount the camera on a tripod and use the optional Remote Cable RM-CB1 to
prevent camera shake caused by pressing the shutter button with your finger. The remote
cable is connected to the remote cable jack on the camera. You can also half-press the
shutter button and lock the exposure and then release the shutter button with the remote
cable, or execute a slow shutter release in the bulb mode.
Set the mode dial to P, A, S, or M.
1
1
2
Attach the camera securely to a
tripod and compose the picture in
the viewfinder.
Remove the cap from the remote
cable jack on the camera, and then
insert the jack of the remote cable
into the camera.
3
2
Keep the cap in a safe place where you
can find it. The remote cable is equipped
with a small screw so you can attach the
cap to the cable.
If you are not going to use the
viewfinder to take the picture, pull
down the eyepiece shutter lever to
prevent light entering the
4
viewfinder from behind the camera.
Light entering the viewfinder from behind
the camera could wash out the picture with
white light.
3
4
Eyepiece
shutter lever
116
To take the picture, press the
shutter button at the end of the
remote cable.
5
Even with the remote cable connected to
the camera you can still release the
shutter by pressing the shutter button.
5
Note
• The remote cable jack on the camera can only
be used with the Remote Cable RM-CB1.
8
117
Using Time-Lapse Photography
You can use the menu to switch on the time lapse mode and select the timer interval
between automatic exposures. For example, if you set the time interval for 5 minutes, you
can capture each stage of a flower opening in the morning. You can set the time interval
in minutes for the shooting session within the range 1 minute up to 24 hours. The actual
time between shots may differ slightly from the time interval setting. (See “Actual time
interval” on page 120.) The camera will continue to take pictures in the time lapse mode
until the batteries discharge or until the memory card fills up. To cancel time lapse
photography, just switch the camera off and on.
Set the mode dial to P, A, S, or M.
OFF
1
2
ON
1
Attach the camera securely to a
tripod, and then compose the
picture in the viewfinder.
Open the built-in flash, set the zoom, set
2
4
up the exposure compensation, adjust the
focus or any other features required for the
pictures that you want to take.
3
Pull down the eyepiece shutter
lever to prevent light entering the
viewfinder from behind the camera.
3
Press the menu button
.
4
5
5
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
time interval mark
.
On the arrow pad, press
the green highlight to the right.
move
6
The previously selected time interval is
displayed.
6
118
Hours
Minutes
Select the hour or minute setting
that you want to change, and then
7
8
7
press
or
to raise or lower the
number.
• Hours
With the setting you want displayed,
press the button to shift to the
Minutes setting.
• Minutes
With the setting you want displayed,
press the
button.
You will be prompted to start time lapse
photography (YES/NO).
On the arrow pad, press
move the green highlight to YES
and then press the button.
to
8
8
Time-lapse photography mode display
The camera starts taking pictures at the
selected time interval. The time interval
setting and the number of shots taken are
displayed in the monitor for about 5
seconds. Before the next picture is taken,
the camera enters the sleep mode and all
the displays are switched off to conserve
battery power. To cancel at any time,
switch the camera off.
Number of
shots taken
Switch the camera
off to cancel
Time interval
119
Using Time-Lapse Photography
(continued)
Actual time interval
The time interval set in the menu is the time when the next picture will be taken after the camera
enters the sleep mode, so there is some additional time lapse until the camera enters the sleep
mode before the time interval actually takes effect. The actual time is calculated with the following
operation times:
• Exposure time (determined by the shutter speed)
• Time required to save the picture on the card (determined by the record mode. A few ~ some ten
seconds)
• Time to display the time lapse information (about 5 seconds)
• Time to recharge the flash (when flash is used. About 7 seconds)
(The time interval between first shot and the second shot is significantly longer. However, after the
second shot, the length of the time intervals conform with the description above.)
Viewing pictures during time lapse photography
If you need to view pictures taken in the time lapse mode, release the camera from the time lapse
mode temporarily.
Note
• Changing a setting while the camera is in the time lapse mode could release the camera from the
time lapse mode, and some settings cannot be changed with the camera in the time lapse mode.
(If you need to change a setting, temporarily release the camera from the time lapse mode.)
• Time-lapse operation stops if batteries go dead. We recommend that you connect the optional AC
adapter or use the optional lithium polymer battery during time-lapse sessions.
• Set up the camera indoors where it will not be exposed to direct sunlight for a long period, and use
a tripod to fix it in position. If the camera is exposed to direct sunlight for a long period, the light
striking the lens could damage the internal CCD.
• Avoid setting up the camera to shoot for 24 hours or so under adverse conditions.
• Keep in mind that that CCD may be damaged if the sun moves into a position where it shines
directly into the lens for a long time. If you are setting up a lengthy outdoor time-lapse sequence,
be very sure that you position the camera so that the sun will not enter the scene.
• Setting up a long shooting session with short time intervals between shots could cause the flash
unit to deteriorate, and such damage to the camera may not be covered by the warranty, so use
the camera carefully.
120
Selecting a Card for Storing Pictures
The pictures that you take are stored on the selected memory card. The SM
(SmartMedia) or CF (CompactFlash) mark tells you which card is currently selected for
storing images. The
mark selects the SmartMedia card and the
mark selects the
CompactFlash card. You can easily select either card for storing images.
Press and hold down the SM/CF
memory card button, and then
slowly turn the main dial or sub
dial to switch the display
1
1
alternately between the SM or CF
mark in the control panel.
8
Control panel
SmartMedia card
CompactFlash card
When you switch the camera on
The card where the last picture was stored is
automatically selected. If only one card is
installed in the camera (either the SmartMedia
or CompactFlash card), then the installed card
is selected automatically.
--- blinking in the control panel?
The selected card is not present. Insert the
card.
121
Selecting the Shutter Sound Type and
Volume
You can use the menu to select the type and volume of the sound emitted by the camera
when the shutter is released, or you can switch off the sound. For the sound type, you
can select the camera
or camera
mark. You can also adjust the volume
between two levels, or shut the sound off.
Set the mode dial to P, A, S, or M.
1
2
3
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
3
to move the green highlight to the
shutter sound mark
.
On the arrow pad, press
move the green highlight to the
right.
to
4
5
6
On the arrow pad, press
select the camera mark
.
to
or
Press the
setting.
button to select the
4
5
6
122
On the arrow pad, press
move the green highlight to the
volume setting bar.
to
No sound Low
High
7
On the arrow pad, press
select the desired setting.
or
to
8
9
9
7
8
Press the
button.
The type and volume of the sound are
selected and the green highlight returns to
the shutter sound mark
.
Press the
menu.
button again to close the
Note
• The shutter sound tells the subject to pose for
the next shot, or tells you when the shutter has
released if you are using the remote unit or the
remote cable to release the shutter.
8
123
Setting the Warning Sound
The camera issues beeps to let you know that it has focused your shot and to alert you
to various other conditions. If you do not wish to hear these beeps, you can use the
following procedure to switch the beep function off.
Set the mode dial to P, A, S, or M.
1
2
OFF
ON
1
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
3
to move the green highlight to the
camera beep mark
.
2
On the arrow pad, press
move the green highlight to the
right.
to
4
5
3
On the arrow pad, press
or
to
move the green highlight to ON (or
OFF) to switch the warning sound
on (or off).
Press the
setting.
button to select the
6
The green highlight returns to the camera
beep mark
Press
.
button again to close the menu.
5
4
6
124
Setting the Rec View Time
You can set the length of time that the picture is displayed on the monitor immediately
after it is taken. Three settings are available for viewing the shot immediately after it is
taken.
Previous shot is not displayed.
OFF
AUTO
5sec
Previous shot is displayed for as long
as it takes for the image to be stored
on the memory card.
Previous shot is displayed for 5 seconds.
Set the mode dial to P, A, S, or M.
1
2
3
8
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
to
3
move the green highlight to the
rec view mark
.
On the arrow pad, press
move the highlight to the right.
to
4
5
6
On the arrow pad, press
to select the desired setting.
or
Press the
setting.
button to select the
The green highlight returns to the rec view
mark
.
Press
button again to close the menu.
4
5
6
125
Setting the Date and Time
Follow this procedure to set the camera clock. When you take a picture, the current date
and time are recorded with the image.
You can select one of the following date formats.
Year, Month, Day
Month, Day, Year
Day, Month, Year
-Y-M-D
-M-D-Y
-D-M-Y
If you set to print the date with print reserve selection, the image will be printed with the
date format selected here.
Set the mode dial to the setup/
1
connection mode
.
OFF
ON
1
Press the menu button
.
2
3
The menu opens in the monitor.
2
On the arrow pad, press
to move the green highlight to the
or
date and time setting mark
.
3
On the arrow pad, press
move the green highlight to the
mark.
to
4
5
Below the date, the date format, -Y-M-D for
example, where Y, M, D stand for the Year,
Month, Day, is displayed.
4
Press
or
to display the date
format that you want to set.
5
126
On the arrow pad press
the green highlight to the date
display.
to move
6
7
6
Two pointers appear above and below the
first setting.
7
Set the year, month, day, hours,
and minutes with 2-digit numbers.
Year Month Day Hour Min.
On the arrow pad, press
increase or decrease the number, and
then press the button with the desired
number displayed. The pointers move to
or
to
the next position. When you press
with
the two pointers on the Minute setting, the
date format, date, and time are set and the
green highlight moves to the date and time
8
setting mark
If you want to cancel setting the date and
time, press the menu button
.
.
Press the
menu.
button again to close the
Note
• When the image is processed with a graphic
software application on a computer, the
information of image that contains the date
setting is erased, and when you save the
image after processing, you must be careful
not to write over files of the same name.
However, if you use CAMEDIA Master 2.5, this
information is not lost after you save the
image.
127
Setting the Idle Time for the Sleep Mode
When the camera is set in the P, A, S, or M shooting mode, if it remains idle for a
specified length of time, it will enter the sleep mode automatically and switch off the
monitor, control panel, and viewfinder displays to conserve the batteries. To restore the
camera to full operation, just half-press the shutter button or any other button. If the
camera remains idle in the sleep mode for 1 hour, then the camera will switch itself off.
If the camera remains idle with the mode dial set to Playback
or Print Reserve , the
camera will switch itself off after a specified length of time has elapsed.
Playback
Print Reserve Mode
,
Setup/ Connection
Mode
Shooting Mode (P, A, S, M)
Camera never enters sleep mode.
Camera neither enters sleep mode, nor switches itself off.
OFF
1MIN
2MIN
5MIN
10MIN
Camera enters sleep mode if Power switches off after 1
it remains idle for 1 minute.
minute.
Camera neither
enters sleep mode,
nor switches itself off.
Camera enters sleep mode if it Power switches off after 2
remains idle for 2 minutes.
minutes.
Camera enters sleep mode if it
remains idle for 5 minutes.
Power switches off after 5
minutes.
Camera enters sleep mode if it Power switches off after 10
remains idle for 10 minutes. minutes.
Once the camera has switched itself off, you must switch it off and on again to restore
full operation.
Note
• After the camera enters the sleep mode, monitor and control panel go off. If the mode dial is set to
setup/connection mode mark
or with the AC adapter connected, the camera will ignore the
sleep mode setting and not switch itself off, regardless of how long it remains idle.
128
Set the mode dial to P, A, S, or M.
1
2
OFF
ON
1
2
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
3
to move the green highlight to the
sleep mode mark
.
On the arrow pad, press
move the highlight to the right.
to
4
5
3
On the arrow pad, press
to select the desired setting.
or
8
Select OFF, 1MIN, 2MIN, 5MIN, or 10MIN.
Press the
setting.
button to select the
6
The green highlight returns to the sleep
mode mark
Press
.
button again to close the menu.
4
6
5
129
Restoring All Default Settings +
Pressing and holding down the flash mode
and record mode
buttons together
releases selected settings and restores their factory default settings.
This procedure restores the following factory default settings.
Drive mode
Single-frame mode (not
Digital ESP
,
,
)
Metering mode
White balance mode
Auto
Exposure compensation ±0
Flash mode
Auto
Record mode
HQ
Monitor menu settings
See page 173.
Resetting the camera has no effect on the following settings:
• Battery selection
• Memory card selection
• Time/date and date format setting
• Zoom
• Mode dial selection
• Focusing mode (AF/MF)
Press and hold down the flash
1
1
mode
and record mode
buttons together.
The camera settings are restored to their
factory default settings.
130
RAW Data Mode
The RAW data mode records images as 10bit/channel data from the CCD. RAW data
files are automatically assigned a file extension, a period and three letters (.orf) after the
file name. This RAW data mode is intended primarily for images to be processed later
with CAMEDIA Master 2.5.
CAMEDIA Master 2.5 restores RAW data images to displayable form using the same
type of processing that the camera uses.
The size of each file will be approximately 7.6MB.
Note
• Pictures taken in the RAW mode are stored without compression, resulting in extremely large file
sizes which limit the number of images that can be stored on a memory card.
• After the camera is set in the RAW data mode, it will remain in this mode even after the camera is
switched off and on again. When you no longer intend to store images as RAW data, you must use
the menu to switch this feature off.
8
• When taking pictures in the RAW data mode, a compressed image is displayed as a thumbnail in
the monitor. If you have no special reason for using the RAW data mode, then switch it off.
• If you have taken pictures in RAW data mode by mistake, you can view the images using
CAMEDIA Master 2.5.
131
RAW Data Mode
(continued)
Set the mode dial to the setup/
1
2
3
connection mode
.
OFF
ON
1
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
to
move the green highlight to the
RAW mark
.
2
On the arrow pad, press
move the green highlight to the
right.
to
4
5
3
On the arrow pad, press
move the green highlight to ON.
to
If you want to switch the RAW data mode
off, select OFF.
Press the
setting.
button to select the
6
7
4
The green highlight returns to the RAW
mark . You will see TIFF blinking in the
control panel.
Press
button again to close the menu.
Set the mode dial to P, A, S, or M
and take the picture.
5
6
The TIFF mark blinks after you select RAW
for shooting and storing images.
132
Using an Optional Conversion Lens
The conversion lenses listed below can be attached to this camera. When you use a
conversion lens, set the zoom setting (TELE or WIDE) on the camera and make sure
that the
camera can use the correct methods to set the focus and exposure for the conversion
lens. If you attempt to use a conversion lens with the camera without the mark
mark is displayed in the control panel. With the
mark displayed, the
displayed, the camera may not be able to set the correct focus and exposure.
The following conversion lenses can be used with this camera.
Conversion Lens
Type
Zoom
Setting
Control Panel
Display
Attachment
Method
3x Extension Lens Tele 300 Pro
TCON-300
8
Support
arm
F2.8
TELE
f=420mm equivalent
Filter diameter 49mm
Complete Multi-Coat
flashing
1.45x Tele Extension Lens Pro
TCON-14B
F2.4
f=200mm equivalent
Filter diameter 86mm
Complete Multi-Coat
Screw
Screw
TELE
WIDE
0.8x Wide Extension Lens Pro
WCON-08B
F2
f=28mm equivalent
Filter diameter 105mm
Complete Multi-Coat
illuminated
Macro Extension Lens Pro
MCON-35
F2~F2.4
Possible to shoot area up
to size of a business card
Filter diameter 72mm
Complete Multi-Coat
Screw
WIDE~TELE
Note
• Using the built-in flash could cause shadows in the image and should not be used.
• If you use a thick filter, such as a PL filter, or combinations of filters, the areas around the
circumference of the image could become dark. Filters can be attached to the camera, but the
results of shooting with a filter cannot be guaranteed.
133
Using an Optional Conversion Lens
(continued)
Using the macro button
to select close up photography
with a conversion lens
.
With the factory mode settings, the camera cannot be set in the conversion lens mode by
holding down the macro button and rotating the main dial, so follow the procedure
below to set the camera for taking close-up pictures with a conversion lens.
Set the mode dial to the setup/
1
2
connection mode
.
Press the menu button
.
3
The menu opens in the monitor.
On the arrow pad, press
move the green highlight to the
right.
to
3
4
On the arrow pad, press
move the highlight to the macro
to
mode/conversion lens mark
.
4
5
If you are not using a conversion lens,
press
to move the highlight to the
macro mark
.
Press the
setting.
button to select the
5
The green highlight returns to the macro
mark
.
Press
button again to close the menu.
134
Selecting conversion lens mode with conversion lens
attached
When a conversion lens is attached to the camera, switch on the conversion lens mark
control panel.
in the
1
Press and hold down the macro
1
button
, and then turn the main
dial or sub dial until you see the
conversion lens mark
control panel.
in the
The display is set as follows.
2
Control Panel
Display
Conversion Lens
8
3x Extension Lens Tele
300 Pro TCON-300
blinks
lights
Other conversion lenses
Conversion lens
mark display
Control panel
Set the zoom position according to
the type of conversion lens that
you are using. (➞ 133)
2
Note
• The composite F number after the conversion lens is attached to the camera is the same as the F
number on the camera, and changes to F2.8 only after the 3x Extension Lens Tele 300 Pro is
attached. Please use F2.8 or higher.
• When the camera is in the conversion lens mode, AF (automatic focus) is conducted only by the
CCD. For more details about the shooting distances and ranges for conversion lenses used with
this camera, please refer to the Olympus web site.
135
136
Playing Back Images
for Viewing
This chapter describes how to play back and view images, play back
images automatically in a slide show, adjust the monitor brightness,
and how to play images on a TV screen connected to the camera.
With the mode dial set for playback
, you can play back and view the
pictures in the monitor that you have taken and stored as images on a
memory card. You can also play back images in the same way with the
mode dial set to P, A, S, or M by rapidly pressing the monitor button
twice.
9
You can scroll the view display frame by frame, enlarge the display, or
view several images at one time in an index display. (© 46)
Displaying Image Information
While viewing images you can select one of four methods to display information about
the settings used to take the pictures (record mode, date and time, shutter speed,
aperture setting, etc.) in the monitor.
Set the mode dial to playback
.
1
If you leave the mode dial set to P, A, S, or
OFF
ON
M, you can also rapidly press the monitor
1
button
twice.
Press and hold down the INFO
2
button
, and then turn the main
dial or sub dial to change the
information display format as
shown on the next page.
The format that you select for displaying
the information is saved and used again
after the camera is switched off and on
again.
2
138
Histogram display
Press
Press
While pressing
, turn right.
While pressing
, turn left.
The histogram is displayed if it
set to display. (©©108)
9
Protected
Selected for printing
Memory card
Record mode (resolution, compression)
Shutter speed, aperture value
Exposure compensation
Folder name/
file name
Standard DCF
file information
White balance setting
ISO (AUTO, ISO setting)
Flash intensity compensation
Frame number (or rate of enlargement if
image enlarged for display)
Date picture
taken
Time picture
taken
Note
• When the image is processed with a graphic software application on a computer, the information
of image (including the data setting) is erased. When you save the image after processing, you
must be careful not to write over files of the same name.
However, if you use CAMEDIA Master 2.5, this information is not lost after you save the image.
• The name of the quality (record mode) (SQ, SHQ, etc.) cannot be displayed.
• The name of the currently selected memory card and frame numbers are always displayed.
139
Automatic Playback (Slide Show)
You can play back in order all the images stored on a memory card as a continuous slide
show. Starting from the currently selected image, each succeeding image is displayed for
5 seconds. After the last image is displayed, the automatic slide show will start again
from the first image stored on the card and continue to show all the pictures until you
switch this feature off.
Set the mode dial to playback
.
1
2
OFF
ON
Use the arrow pad to display the
image where you want to start.
1
2
(If you have switched on the enlarged
display, then one image will be in the slide
show.)
Press the menu button
.
3
The menu opens in the monitor, and the
slide show mark is highlighted green.
3
140
On the arrow pad, press
move the green highlight to START.
to
4
5
5
Press the
button.
The slide show begins. If you want to skip
to the next image before the 5 second
display for the current image ends, on the
4
arrow pad press
. If you want to display
the previous image again, press
.
To end the slide show, press the
button or the menu button
6
.
9
End slide show
6
Next frames
(fast display)
Previous frame
Slide shows in the index display
If you want to set up a slide show in the index display, first use the main dial or sub dial to switch on
the index display.
141
Displaying Images on a TV Screen
After connecting the camera to a television with the provided video cable, you can use
the TV screen to display images of pictures taken with the camera. To conserve battery
power, we recommend connecting the optional AC adapter to the camera when the
camera is connected to a TV.
Switch off the television.
1
2
OFF
Make sure that the camera power
switch is at the OFF position.
ON
2
If the power switch is set to ON, move it to
OFF.
Open the camera connector cover.
3
4
Insert one end of the video cable to
the video OUT jack on the camera.
Insert the other end of the video
cable to the video IN jack of the
television.
5
3
Switch on the television, and select
the Video IN channel.
6
4
Set the camera mode dial to
7
playback
.
On the camera, move the power
switch to the ON position.
8
The image of the last picture taken is
displayed on the TV screen. While images
are displayed on the TV screen, nothing is
displayed in the monitor.
To television video
IN jack
5
6
7
OFF
ON
8
142
Images off-center on the TV screen?
With some TV sets, the images could appear slightly off center.
Images appear with black frame?
With some TV sets, the images could display with black frames. These frames could appear in
printouts sent from the television directly to a video printer.
Viewing pictures, index display, enlarged display (© 46)
Note
• The brightness of the image displayed on a TV screen cannot be adjusted with controls on the
camera.
• This camera can only be connected to video equipment that supports NTSC signal.
9
143
Adjusting Monitor Brightness
The brightness of the monitor can be adjusted.
Set the mode dial to playback
.
1
2
Press the menu button
.
OFF
ON
1
The menu opens in the monitor.
On the arrow pad, press
or
3
to move the green highlight to the
monitor mark
.
On the arrow pad, press
.
4
The image is displayed and the camera
enters the brightness adjustment mode. If
no image is displayed, then you can still
adjust the brightness with only the menu
displayed. However, we recommend that
you adjust the monitor brightness by
reviewing an image stored on a card.
2
3
On the arrow pad, press
or
to
5
6
brighten or darken the monitor
display to attain the desired
brightness.
Press the
button.
The monitor mark
and scale go off.
4
5
6
144
Managing Stored
Pictures
In this chapter we describe copying and deleting images, and
formatting a memory card.
Copying images to another card. You can copy all or selected images
from one memory card to another in the camera to create backup
copies of important pictures that you do not want to lose.
Deleting images. You can delete images stored on a memory card one
at a time or all at one time to create more storage space on a memory
card.
Formatting a card. Some memory cards may require formatting in the
camera before they can be used. Formatting is also a quick way to
delete all images from a card.
10
File and folder naming. When pictures are taken, they are
automatically named to prevent them from writing over other files on
the card which could possibly have the same names.
Copying Images to Another Card
With a SmartMedia and CompactFlash card installed in the camera at the same time,
you can copy images from one card to the other. The copied images are not deleted from
the original card after copying is completed.
Copying all images to another card
You can copy all images from a source card, provided the target card has sufficient space to store
the copied images.
Control panel
Displays the mark
for the source card
Insert the copy source and target
cards in the camera. (©©30)
1
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
or
2
OFF
ON
CompactFlash
, is displayed.
3
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
Set the mode dial to playback
.
3
4
5
The last picture taken is displayed.
Press the menu button
.
9
4
The menu opens in the monitor.
On the arrow pad, press
or
to move the green highlight to the
copy mark
.
5
On the arrow pad, press
move the green highlight to ALL.
to
6
7
6
146
Copying from a SmartMedia to
a CompactFlash card
Press the
button.
7
COPY? is displayed.
Check the display and make sure that the
source and target selections are correct. If
the selections are reversed, with NO
selected press the
button, and then
start again from Step 2.
On the arrow pad, press
move the green highlight to YES.
to
8
9
Press the button.
8
9
During copying
A progress bar is displayed as the images
are copied. After copying is completed, the
first displayed image appears.
Cannot copy?
• NO CARD displayed?
The destination card is not inserted in the
camera. Insert the destination card.
• CARD FULL displayed?
Storage space on the destination card is
insufficient. Create more space on the
destination card by deleting images. You can
also copy fewer images by selecting only the
images that you want to copy. (©©148)
• WRITE PROTECT displayed?
10
The card selected to store the copied image is
protected with a protect seal. Replace the
card, select the other card, or remove the
protect seal.
Folder and file names of copied pictures
Copied images are assigned new file names and stored in a new folder. The date and time the
images were created (time stamp) retain the original creation date and time stored with the images.
Copying images not taken with this camera
All pictures taken with this camera are stored in DCF (Design rule for Camera File system) format.
Pictures taken and stored with another camera can be copied if they are in DCF format. Pictures not
in DCF format cannot be copied to a memory card in this camera.
Caution
• To avoid interrupting the copy operation, while images are being copied from one card to another,
never switch the camera off, never reset the mode dial, and never open the memory card cover. If
you interrupt the copy operation in progress, the copying will be canceled and cannot be restarted.
147
Copying Images to Another Card
(continued)
Copying only selected images
Images can be copied one by one between the two types of memory cards installed in the camera.
Follow Steps 1~5 for copying all
images. (©©146)
1
The copy mark
is highlighted green.
On the arrow pad, press
move the green highlight to
SELECT.
to
2
3
2
Press the
button.
3
4
The image is displayed.
On the arrow pad, press the
to select the image that you
want to copy.
or
Press the
button.
5
A progress bar is displayed as the image
is copied. After copying is completed, the
first displayed image appears.
To end the copy operation, press the menu
button
.
Copy
5
Next picture
Previous picture
During copying
148
Cannot copy?
• NO CARD displayed?
The destination card is not inserted in the camera. Insert the destination card.
• CARD FULL displayed?
Storage space on the destination card is insufficient. Create more space on the destination card
by deleting images.
• WRITE PROTECT displayed?
The destination card is protected. Remove the protect seal from the card.
Folder and file names of copied pictures
Copied images are assigned new file names and stored in a new folder. If a folder does not exist, a
new folder is created. The date and time the images were created (time stamp) retain the original
creation date and time stored with the images.
Copying images not taken with this camera
All pictures taken with this camera are stored in DCF (Design rule for Camera File system) format.
Pictures taken and stored with another camera can be copied if they are in DCF format. Pictures not
in DCF format cannot be copied to a memory card in this camera.
Caution
• To avoid interrupting the copy operation, while images are being copied from one card to another,
never switch the camera off, never reset the mode dial, and never open the memory card cover. If
you interrupt the copy operation in progress, the copying will be canceled and cannot be restarted.
10
149
Deleting All Images
With one procedure you can quickly delete all images stored on a SmartMedia or
CompactFlash memory card.
Make sure that the card with the
pictures that you want to delete is
1
2
inserted in the camera. (©©30)
OFF
ON
3
Make sure that the card selection
mark for the card with the pictures
2
to be deleted,
SmartMedia card or
for the
for the
CompactFlash card, is displayed in
the control panel.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
4
Mode dial set to P, A, S, or M
Set the mode dial to P, A, S, M or
3
4
5
to playback
.
Press the menu button
.
7
The menu opens in the monitor.
6
If you set the mode dial to
playback
press
, on the arrow pad
to move the green
or
highlight to card setup
.
Mode dial set to
On the arrow pad, press
to
6
7
5
move the green highlight to the
card erase option
.
Press the
button.
DELETE ALL? is displayed.
7
6
150
On the arrow pad, press
move the green highlight to YES.
to
8
9
Press the
button.
The delete icon and message are
displayed on the monitor while the images
are being deleted. Images which have
been protected are not deleted.
The card access lamp blinks while the
images are being deleted and then goes
off after all the images have been deleted.
9
8
Display while deleting
Pictures which cannot be deleted
Protected pictures cannot be deleted. To delete
protected pictures, you must first release them
from protection or format the card. (©©50, 152)
Images that are not stored in DCF format (©
192) cannot be deleted all at once. In order to
delete images that are not in DCF format, you
can delete them one by one or format the card.
(©©51, 152)
10
You can also delete images one by one.
(© 51)
Note
• Deleting 500 images requires a few seconds.
While the card access lamp is blinking, never
switch the camera off, never reset the mode
dial, and never open the memory card cover.
Card access
lamp
Blinks as
images are
deleted, goes
off after all
images deleted.
151
Formatting a Memory Card
Memory cards which have been formatted on a computer or other external device, or
cards of another manufacturer, may have a different format. Such cards should be
formatted before they are used with the camera. Formatting a used card deletes all the
images stored on the card, so you should frequently copy images to a computer where
they can be stored safely. A SmartMedia card protected by an attached protect seal
cannot be formatted.
Insert the card that you want to
format into the camera. (©©30)
1
OFF
ON
Check the control panel display
and make sure that the mark for
2
2
3
the card that you want to format,
SmartMedia
or CompactFlash
, is displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
4
Set the mode dial to P, A, S, M, or
3
4
5
to playback
.
Mode dial set to P, A, S, or M
Press the menu button
.
The menu opens in the monitor.
If you set the mode dial to
7
playback
press
, on the arrow pad
to move the green
or
6
highlight to card setup
.
On the arrow pad, press
move the green highlight to the
to
6
7
Mode dial set to playback
format mark
.
5
Press the
button.
FORMAT? is displayed.
7
6
152
On the arrow pad, press
move the green highlight to YES.
to
8
9
Press the
button.
The format icon and message are
displayed on the monitor while the
selected card is being formatted. All
images, including images which have been
protected, are deleted from the card.
The card access lamp blinks while the
card is formatting and then goes off after
formatting has been completed.
8
9
During formatting
Note
• Formatting a card requires a few seconds.
While the card access lamp is blinking, never
switch the camera off, never reset the mode
dial, and never open the memory card cover.
10
Card access lamp
Blinks during formatting,
goes off after formatting
is completed.
153
Naming Image Files
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
The folder and file name can later be used for file handling on a computer. File names are
assigned as shown in the illustration below.
Folder name
All folders
OLYMP
Folder number (100~999)
DCIM
100 OLYMP
File name
Pmdd
.jpg
File number (0001~9999)
P2030001.jpg
P2030002.jpg
P2030003.jpg
P2030004.jpg
After taking 9999 pictures, the counter is reset
to 0001 for the next picture, the folder number
increments by 1 to name and create a new
folder where the next image (file) is stored.
Day (01~31)
Month (10, 11, 12 are
numbered A, B, C)
You can select RESET or AUTO to determine how numbering is restarted every time you
change a memory card. When you purchase the camera, the AUTO method is already
selected for you.
With RESET selected, a new image is automatically assigned the next available number.
If there are no files on the card, the image is assigned 0001 as the file number.
With AUTO selected, the camera remembers the number of the last picture taken,
increments the number by 1, and assigns this number to the next picture taken on the
next memory card. Therefore, no matter how many times you change memory cards, the
file names cannot be duplicated. On the card where you try to store the image, if there is
an image file with a number higher than the last image stored on the card, then the
camera uses the highest number to continue numbering, assigns the number to the new
image and stores it with that number.
154
Set the mode dial to the setup/
1
2
3
connection mode
.
1
OFF
ON
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
or
to
move the green highlight to the
FILE NAME mark
.
On the arrow pad, press
move the green highlight to the
right.
to
4
5
6
2
On the arrow pad, press
move the green highlight to the
AUTO or RESET.
or
to
3
Press the
setting.
button to select the
The green highlight returns to the FILE
NAME mark
Press button again to close the menu.
10
.
4
5
6
Note
• If there is no OLYMP folder on the memory
card, a new folder is created and the image is
stored in the new folder.
• Once the folder numbering reaches 999 or file
numbering reaches 9999, you will not be able
to continue storing images on the card. You will
need to replace the card. (© 30)
155
156
Selecting Pictures for
Printing
This chapter describes how to select pictures for printing on a DPOF
(Data Print Order Format) printer or by a DPOF printing service.
To print the pictures taken with this camera, you can remove the
memory card with the stored pictures from the camera and print them
on a DPOF printer, or have them printed by a DPOF printing service.
You can also transfer the pictures to a computer and then print them on
a printer connected to the computer.
Pictures cannot be printed on an Olympus Digital Printer P-300 or
other digital printer connected directly to the camera.
If an Olympus Digital Printer P-330 is connected to the video OUT
connector of the camera for printing, the printed images may appear
slightly grainy. The following limitations apply to printing images on a
SmartMedia card on a P-330.
(1) Only the first 256 images stored on a SmartMedia card can be
printed. The remaining images will not be recognized.
(2) Setting index printing or date and time stamping, and selecting
more than two images for printing will be disabled.
11
Selecting Pictures and Number of
Copies for Printing
You can select all or single pictures for printing and specify the number of copies for
printing. With the memory card in the camera, you can select one or more pictures for
printing and specify the number of copies for each print. This information is stored on the
card with each selected image so you can print the pictures with your own DPOF
compatible printer or deliver the card to a print service which can provide DPOF printing.
You can select up to 998 images on the same card for printing, and you can specify
1~10 copies for each selected picture.
Insert the memory card that
contains the pictures that you want
1
to select for printing. (©©30)
Memory card
with pictures to
be selected for
printing
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
2
or
CompactFlash
, is displayed.
2
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
OFF
ON
3
Set the mode dial to print reserve
.
3
4
The last picture taken is displayed in the
monitor.
5
4
Display the picture that you want
to select for printing.
With several pictures displayed together in
the index display, on the arrow pad press
to highlight the image that you
want to select for printing. (©©49)
Press the
button.
5
Numbers 0~10 are displayed.
158
Specifying the number of copies
On the arrow pad, press
or
6
7
to move the green highlight to the
number of copies that you want to
print for the selected picture.
Press the
button.
The picture selected for printing is marked
with the print reserve mark followed by
a “x” and the number of copies set for
printing that image.
6
7
If you want to select more pictures for
printing, repeat this procedure from Step 4.
Print reserve mark
Number of copies
11
Changing the number of copies
If you need single prints of nearly all the pictures stored on the card, first select all the pictures for
printing. (© 160) Second, select each image one by one and then set the number of copies that you
need if more copies are needed.
To cancel print selection
Follow the procedure to select pictures for printing, but set the number of copies to 0 to cancel print
selection.
You can also cancel all pictures selected for printing. (©©161)
Note
• Images that have been stored in the RAW data format cannot be selected for printing.
• The level of DPOF compatibility is different for some printers and you could experience some
problems in printing pictures selected for printing with the print reserve features on the camera.
(©©166)
159
Selecting All Pictures on a Card for
Printing
You can select all pictures stored on a card to print one by one.
Memory card
with pictures to
be selected for
printing
Insert the memory card that
contains the pictures that you want
to select for printing. (©©30)
1
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
or
OFF
ON
2
CompactFlash
, is displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
3
button, and then turn the main dial or sub
dial until it is displayed.
Set the mode dial to print reserve
.
3
4
The last picture taken is displayed in the
monitor.
Press the menu button
.
4
5
The menu opens in the monitor.
On the arrow pad, press
move the green highlight to the
SELECT ALL.
to
5
6
Press the
button.
6
SELECT ALL? is displayed.
160
On the arrow pad, press
move the green highlight to YES.
to
7
8
Press the
button.
The print reserve icon and message are
displayed on the monitor while the images
are being selected for printing. When the
print reserve selection is completed, the
first displayed image appears.
7
8
Before using print reserve to select all images for printing
Please remember that selecting all images for printing with print reserve disables any previous print
reserve settings on the card. For example, if you have selected any images for printing more than
one copy, these settings will be released and only one copy of each image will be printed after you
select all images for printing.
Pictures shot after reserving all frames for printing
After you have selected all pictures on a card for printing, if you shoot and store pictures on the
same card, the new pictures will not be selected for printing. If you need to select added pictures for
printing, just repeat the procedure above to select all the pictures on the card again. If you execute
print reserve selection for all images again, then all the images on the card are selected, not just the
images that were not previously selected.
11
To cancel all pictures selected for printing
At Step 5, on the arrow pad press
twice to select
CLEAR ALL. Then follow the remaining steps to
complete the procedure.
Note
• Selecting a large number of pictures for printing could take a long time. Before you start selecting
a large batch of pictures for printing, check the battery check in the viewfinder and make sure
sufficient battery power is available, or if possible, connect the optional AC adapter. While selecting
pictures for printing, never switch the camera off or open the memory card cover.
If you are interrupted during picture selection for printing, you will have to start again.
• Images stored as RAW data cannot be selected for printing. (© 131)
• The level of DPOF compatibility is different for some printers and you could experience some
problems in printing pictures selected for printing with the print reserve features on the camera.
(©©166)
161
Setting Up Index Printing
You can select all pictures stored on card for index printing.
Memory card
with pictures
to be selected
for printing
Insert the memory card that
contains the pictures that you want
to select for printing. (©©30)
1
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
or
2
OFF
ON
CompactFlash
, is displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to print reserve
.
3
4
The last picture taken is displayed in the
monitor.
Press the menu button
.
4
5
The menu opens in the monitor.
On the arrow pad, press
or
5
to move the green highlight to the
index all mark
.
On the arrow pad, press
move the green highlight to
SELECT ALL.
to
6
6
7
Press the
button.
7
8
SELECT ALL? is displayed.
On the arrow pad, press
move the green highlight to YES.
to
8
162
Press the
button.
9
The print reserve icon and message are
displayed on the monitor while the images
are being selected for printing. When the
print reserve selection is completed, the
first displayed image appears.
9
Taking a picture after selecting index printing
If you take more pictures after selecting all the pictures on a card for index printing,
the exclamation mark will appear to warn you that not all pictures on the card are
selected for index printing. Repeat the procedure above to ensure that all pictures
on the card are selected for index printing.
Cancelling all pictures selected for index printing
At Step 6 above, on the arrow pad press
green highlight to CLEAR ALL. Then follow the remaining
steps to complete the procedure.
to move the
11
Index Printing
Index printing prints several images arranged as shown. The
number of images printed on a sheet is determined by the
printer in use.
Note
• Selecting a large number of pictures for printing could take a long time. Before you start selecting
a large batch of pictures for printing, check the battery check in the viewfinder and make sure
sufficient battery power is available, or if possible, connect the optional AC adapter. While selecting
pictures for printing, never switch the camera off or open the memory card cover.
If you are interrupted during picture selection for printing, you will have to start again.
• Images stored as RAW data cannot be selected for printing. (© 131)
• The level of DPOF compatibility is different for some printers and you could experience some
problems in printing pictures selected for printing with the print reserve features on the camera.
(© 166)
163
Selecting Pictures for Date or Time
Stamping
You can set images selected for printing to be stamped with the date or time (not both)
when they are printed. When this setting is applied, it applies to all pictures selected for
printing.
Memory card
with pictures to
be selected for
date or time
Insert the memory card that
contains the pictures that you want
to select for date or time stamp
printing. (©©30)
1
stamp printing
Check the control panel display
and make sure that the mark for
2
2
the source card, SmartMedia
or
CompactFlash
, is displayed.
OFF
ON
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to print reserve
.
3
4
4
Press the menu button
.
The menu opens in the monitor.
164
On the arrow pad, press
to move the green highlight to the
or
5
5
date/time stamp mark
.
On the arrow pad, press
the green highlight to the right.
to move
6
7
6
7
On the arrow pad, press
the green highlight to DATE or
TIME.
to move
8
To cancel date or time stamp printing,
press
OFF .
to move the green highlight to
Press the
setting.
button to select the
8
Press the
button again to close the
menu. The last picture taken is displayed.
Note
• The DPOF standard permits printing either the date or time stamp (not both). You must select
either the date or time for stamping your prints.
• Selecting a large number of pictures for printing could take a long time. Before you start selecting
the a large batch of pictures for printing, check the battery check in the viewfinder and make sure
sufficient battery power is available, or if possible, connect the optional AC adapter. While selecting
pictures for printing, never switch the camera off or open the memory card cover.
If you are interrupted during picture selection for printing, you will have to start again.
• The level of DPOF compatibility is different for some printers and you could experience some
problems in printing pictures selected for printing with the print reserve features on the camera.
(© 166)
11
• If you use index printing, you cannot stamp the prints with the date or the time.
165
Printing with Olympus Printers
The table below describes to what extent Olympus printers are compatible with the
DPOF format.
Olympus Printers and DPOF Compatibility
Printer
Name
1 Frame
Select
Multiple
Frame Select
Index
Printing
Trimming
Rotation
Date
P-330*1
P-330N*2
P-400
YES
YES
YES
NO
YES
YES
NO*3
YES*3
YES*3
NO*3
YES*3
NO*3
NO *4
NO *4
NO *4
NO *4
NO *4
NO *4
P-150
No DPOF compatibility.
No DPOF compatibility.
P-300
*1
*2
You can print JPEG files up to 1MB in size.
If you are printing via the video OUT connection, printed images will appear grainy.
If you are printing from a SmartMedia card, you can print up to 256 images on the SmartMedia
card. More than 256 images cannot be recognized. Also, if you selected index printing, date or
time stamping, or printing more than 2 copies, these settings are disabled.
You can print TIFF files up to 20MB in size, and JPEG files up to 10MB in size.
If you are printing from a SmartMedia card, you can print up to 999 images on the SmartMedia
card. More than 999 images cannot be recognized.
*3
*4
Some printer features may allow you to rotate and trim images, but these functions are not
available on this camera.
If you select date stamping or index printing, these settings are disabled but you can set these
features with the printer.
166
Transferring Pictures to
a Computer
This chapter describes what you need to transfer images from a
memory card to an IBM compatible computer or Macintosh.
Setting up computer connection. An included computer connection
kit can be used to connect the camera directly to your computer.
Options for reading images from memory cards. A variety of
optional devices allow you alternate methods for reading images from
memory cards and transferring them to a computer.
12
Transferring Images with a Computer
Connection Kit
The camera can be connected to a computer equipped with a USB connector, using a
dedicated USB cable. You can read images from either card in the camera with the
computer.
• An IBM compatible PC/AT with Windows 2000 installed.
• An Apple Macintosh with Mac OS 9 installed.
A dedicated USB cable required.
• An IBM compatible PC/AT with Windows 98 or Windows 98 Second Edition
installed.
A USB driver and dedicated USB cable required.
A USB driver is provided with CAMEDIA Master 2.5, or you can download the most
recently updated drivers and software from the Olympus Web Site at
www.olympus.com
• An Apple Macintosh with Mac OS 8.6 installed.
A dedicated USB cable required.
USB Mass Storage Support 1.3.5 required. For more details about USB Mass Storage
Support, contact Apple Computer.
Connecting the camera to a computer for the first time
The first time you connect the camera to a computer, the computer starts to read the USB driver.
Versions of Windows, other than Windows 2000, will request that you insert the installer disk for the
USB driver. For details, read the USB driver instructions.
Note
• We cannot guarantee performance of the camera connected to a computer where the following
operating systems are installed, even if the computer is equipped with a USB connector:
Windows 95 upgraded to Windows 98
Windows 95, Windows NT 4.0
• Make sure that your computer is guaranteed to support operation of USB. For more details about
your computer environment, contact your computer manufacturer.
• Please understand that performance is not guaranteed for Mass Storage Support upgrade
versions for the Mac OS.
• You could encounter difficulty transferring images if you connect the USB cable to a hub connected
to the computer. If you encounter problems, disconnect the cable from the hub and connect it
directly to the computer.
168
If you are using an IBM compatible
PC/AT without Windows 2000
installed, you must first install the
USB driver.
1
2
For more details about how to install the
USB driver, refer to the instructions that
you received with the CAMEDIA Master.
Select the memory card that holds
the images you want to read with
the computer. (➞ 121)
3
Note that you cannot change the card
selection once the camera is connected
the computer. If you wish to change the
card selection, you must first disconnect
the USB cable. (➞ 171)
B
Open the connector cover on the
camera.
3
4
4
5
Connect the B connector of the
USB cable (the large connector) to
the camera connection point.
A
Connect the A connector of the
USB cable (the flat connector) to
the computer.
5
12
To the USB port
of the computer
Note
• If your computer has two USB ports, you can
use either port.
OFF
ON
Set the mode dial to
connection mode).
(setup/
6
6
Note
• The computer recognizes the card selected in
the camera as an external disk drive. Normally,
the device is displayed as a “Removable Disk”.
The images on the card can be handled as
files with Windows Explorer.
While copying or moving image files, never
disconnect the USB cable from the camera or
computer.
Switching the card
After changing the card inserted in the camera,
make sure that the drive that names the card
displays the correct information. To confirm that
the display is correct, in Windows Explorer from
the View menu select Refresh.
169
Transferring Images with a Computer Connection Kit (continued)
Removing a card while the camera is connected to a
computer
Improperly removing a card while the camera is connected to the computer may cause the
computer to operate incorrectly. Always follow the procedure below to remove a card. (To recover
from a computer problem, you may need to reconnect the USB cable or restart the computer.)
Windows 98, Windows 2000
Double-click the My Computer icon, right-click the drive icon for the
camera (marked Removable Disk), and then select Eject in the pop-
up menu. Make sure the card access lamp on the camera is off, and
then open the card cover and remove the card.
Mac OS
On the desktop drag and drop the drive icon on the Trash icon, or
select Eject from the Special menu. Make sure that the card access
lamp on the camera is off, and then open the card cover and
remove the card.
170
Disconnecting the USB cable
Windows 98, Mac OS
Make sure that the card access lamp on the camera is off, and then disconnect the USB cable as
follows.
Windows 2000
Follow one of the procedures below.
(1) Single-clicking the
icon on the Taskbar.
1 Click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the
desktop. (See illustration below.)
2 When the message to halt the drive appears, click this message.
3 When the Unplug Hardware message tells you that the device can be removed safely, click
the OK button.
4 Disconnect the cable.
(2) Double-clicking the
icon on the Taskbar.
1 Double-click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the
desktop.
2 When the Unplug Hardware dialog box opens, click the name of the camera in the hardware
device list, and then click the Stop button.
3 When the Unplug Hardware message tells you that the device can be removed safely, click
the OK button.
4 Disconnect the cable.
12
Note
• To avoid problems, never change the camera’s mode or switch the camera off and on while the
camera is connected to the computer, especially when images are being transferred from the
camera to the computer.
• The camera does not enter sleep mode or automatically switch off the power while operating in
setup/connection mode. If you intend to leave the camera connected to the computer for a long
time, we recommend connecting the optional AC adapter to avoid draining of the batteries.
171
Optional Devices for Card Reading
You can use one of the following optional devices to read images from a card with a
computer.You can use these devices (with the exceptions of the SmartMedia Reader/
Writer MAUSB-1) to read images from memory cards if you are using a computer that is
not equipped with a USB port, or is not fully guaranteed for USB operation. For more
details and the most recent information about these devices, contact an Olympus
authorized service center.
Card
Type
What you need on
the computer
Device
Floppy Disk Adapter
FlashPath MAFP-2N
3.5-inch floppy drive required.
Smart
Media
PC Card Adapter
MA-2
PCMCIA card slot required.
SmartMedia Reader/
Writer MAUSB-1
USB connector required.
Compact
Flash
PC Card Adapter
PCMCIA card slot required.
Note
• Before you purchase and try to use any of these devices, make sure that they compatible with
your computer environment and can handle the data stored on a SmartMedia card.
• Make sure that you read all the instructions provided with these optional devices.
172
13
Monitor Menus
Use the monitor menu to set up camera operation and perform
important functions like formatting a memory card.
Monitor Menus
Use the monitor menus to set up camera operation and perform important functions like
formatting a memory card. Four different menus are available, with the menu display
determined by the setting of the mode dial:
• Shooting mode menu (P, A, S, or M)
• Playback mode menu (
)
• Print reserve mode menu (
)
• Setup/connection mode menu (
)
Set the mode dial to the desired
setting.
1
2
1
2
3
Press the menu button
.
The menu opens in the monitor.
On the arrow pad, press
to
3 4 5
move the green highlight down the
menu.
Press
the menu.
to move the green highlight up
Shooting mode menu
(1st menu page)
Green highlight
(Moved by pressing
arrow pad pointers)
On the arrow pad, press
move the green highlight to the
right.
to
4
5
3
Use the arrow pad to select menu
options and settings.
To cancel making menu settings, press the
menu botton
.
5
4
In the shooting mode (mode dial set to P,
A, S, or M) you can shoot a picture with
the menu displayed in the monitor. When
you shoot a picture the menu extinguishes,
but you can restore it immediately by
Menu items
To next menu page
Selected option marked
in relief.
pressing the menu button
. This is
convenient for checking and changing
settings while shooting.
Press the
button.
6
If you have selected a setting, the selected
option is marked in relief and the green
highlight returns to the left.
Press the
menu.
button again to close the
6
174
Shooting mode menus for P (Program mode), A (Aperture
priority mode), S (Shutter priority mode), M (Manual mode)
Default
Setting after
and
Page
pressed at the same time
Delete all images from selected
SmartMedia or CompactFlash
card, and format a card.
1/3
➞ 150
➞ 152
−
AUTO
➞ 83
ISO (sensitivity) setting.
Bracket same subject with 3
rapid shots with different
exposures.
OFF
➞ 81
Flash intensity control.
±0EV
➞ 90
2/3
Sharpness.
NORMAL
NORMAL
➞ 106
➞ 107
➞ 103
➞ 118
Overall image contrast.
See 1 table,
page 103.
Record mode (quality,
resolution, compression).
Set interval time (specify time
interval between shots during
automatic time lapse photography).
OFF
3/3
Shutter sound setting (high,
low, OFF).
13
OFF
ON
➞ 122
➞ 124
Warning sound (ON, OFF).
Image display after shooting.
Sleep mode timer setting.
OFF
➞ 125
➞ 128
1MIN
175
Monitor Menus
(continued)
Default
Setting after
and
Page
pressed at the same time
Playback mode menu
Slide show
(Automatic playback).
−
−
➞ 140
➞ 146
Copy images card-to-card.
➞ 150
➞ 152
Delete all images from card,
format card.
−
±0
➞ 144
Monitor brightness.
Print reserve mode menu
Select or cancel all pictures for
printing.
−
OFF
−
➞ 160
➞ 164
➞ 162
Set date or time stamping on
prints.
Select or cancel all pictures for
index printing.
Setup/connection mode menu
1/2
Determines whether conversion lens Macro
selected
without conversion
lens
➞ 133
➞ 126
➞ 154
➞ 131
is selected when marcro button
is pressed.
.
Year/month/day
Set year/month/day format.
Set current date and time.
(unchanged even by
pressing
and
)
After you replace a memory card, you can
restart file numbering (RESET) or continue
sequential file numbering (AUTO).
AUTO
OFF
Pictures stored as RAW
(unprocessed, uncompressed)
data.
2/2
➞ 108
Switches histogram on and off.
OFF
176
Appendices
These appendices provide some reference materials that summarize
menus, important specifications, additional options available for the
camera, some important details about files, and how to troubleshoot
minor problems.
1. Specifications
2. Available Options
3. Image File Compatibility
4. Troubleshooting
Troubleshooting camera operation
Troubleshooting image problems
5. Camera Error Messages
Appendix 1: Specifications
Product type
SLR digital camera (recording, playback)
Recording system
Digital recording, JPEG, in accordance with Design rule for
Camera File (DCF), TIFF (non-compressed), DPOF
compatible.
Memory
3V (3.3V) SmartMedia: 4MB, 8MB, 16MB, 32MB, 64MB;
CompactFlash (Compatible with Type I and II. Micro drive
cannot be used.)
Storable pictures
Erase
Image pickup element
Approx. 8 frames (HQ/8MB)
Single frame, All frame erase
2/3 in. primary color filter
4 million pixels (picture elements)
2240 x 1680 pixels
Image recording
1600 x 1200 pixels
1280 x 960 pixels
1024 x 768 pixels
640 x 480 pixels
White balance
Lens
Auto (full TTL), Preset (7 steps), Quick Reference
(one-touch)
Olympus 9~36 mm, f/2.0~f/2.4, 14 elements in 11 groups
(equivalent to 35~140 mm lens on standard SLR 35 mm
camera)
Filter diameter
62 mm
Metering system
Digital ESP (Electro Selective Pattern) metering, Center
weighted averaging metering, Spot metering
P (Program mode), A (Aperture priority), S (Shutter priority),
M (Manual mode)
Exposure control
Aperture
WIDE : F2.0~11,
TELE : F2.4~11
Shutter
2~1/640
Manual mode: bulb (Limit: 30 sec.), 8~1/640
Exposure compensation ±3EV (1/3EV Steps)
Working range (from lens) Standard: 0.6 m~∞ (2 ft.~∞)
Macro: 0.2 m~0.6 m (0.7~2 ft.)
Viewfinder
SLR
Finder view field 95%, Wide x 0.42, Tele x 1.60
1.8 in. TFT color liquid crystal display
Operation : Used to compose pictures, just like the viewfinder.
Playback : Image display (single-frame, multi-frame
index display, enlarged display)
Monitor
Monitor resolution
Approx. 118,000 pixels
178
Flash recharge time
Approx. 7 sec. at normal temperature with new batteries
(CR-V3)
Flash working range
(from lens surface)
Flash modes
(ISO 80) WIDE 0.6 m~6.3 m (2~20.8 ft.)
TELE 0.5 m~5.2 m (1.7~17.2 ft.)
Auto (auto activated in low light, backlight)
Red-eye reduction
Fill-in flash (disabled if built-in flash closed),
Slow synchronization, 2nd-CURTAIN
Off (no flash)
Autofocus
Dual autofocus
Detection system
Focusing range
Contrast detection system/active AF method
Normal shooting mode: 0.6 m~∞ (2 ft.~∞),
Macro: 0.2 m~0.6 m (0.7~2 ft.)
Self-timer
External connectors
Date, time
Operation time: 12 sec.
DC IN jack, USB connector, video OUT jack
Recorded with image file information
For camera information display, or date or time stamp
for printing possible
Automatic calendar
Print reserve selection
Auto correction up to year 2030
DPOF standard (setting number of copies, index
printing, date or time stamping)
RAW data output feature 10-bit AD output data (ORF file format), ICC profile not
attached
Interval time for time-lapse shooting 1 min. to 24 hours
Calendar power supply
Non-removable manganese-lithium
Operating environment
Temperature
Operation: 0~40°C (32~104°F)
Storage: −20~60°C (−4~104°F)
Operation: 30~90%
Humidity
Storage: 10~90% without condensation
3V lithium battery pack CR-V3 x 2
AA Nickel-Metal Hydride batteries x 4
AA Ni-Cd batteries x 4
Power supply
AA Alkaline batteries x 4
AA Lithium polymer battery
AC Adapter
Note: Never use AA Manganese or AA Lithium batteries. They could overheat and
damage the camera.
Dimensions
Weight
128.5 W x 103.5 H x 161 L mm (protuberances not included)
5.1 W x 4.1 H x 6.8 L in.
1050 g (without cards, batteries, and lens cap)
Specifications are subject to change without prior notice or obligation.
179
Appendix 2: Available Options
Dedicated External Flash (FL-40)
Dedicated Flash Bracket (FL-BK01)
Dedicated Bracket Cable (FL-CB01~04)
Conversion Lenses
0.8x Wide Extension Lens Pro (WCON-08B)
Macro Extension Lens Pro (MCON-35)
1.45x Tele Extension Lens Pro (TCON-14B)
3x Extension Lens Tele 300 Pro (TCON-300)
Support Arm 2 (TCON-SA2)
Remote Cable (RM-CB1)
Camera Case (Semi-Hard Case)
AC Adapter
AA Ni-MH (Nickel-Metal Hydride) battery
Dedicated Recharge Device
Lithium Polymer Battery (B-10LPB)
Power Battery Holder (B-HLD10)
Lithium Polymer Battery Recharger (B-20LPC)
SmartMedia (8MB, 16MB, 32MB, or 64MB)
PC Card Adapter MA-2
Compatible up to 64MB SmartMedia
Floppy Disk Adapter FlashPath MAFP-2N
Compatible up to 64MB SmartMedia
SmartMedia Reader/Writer MAUSB-1
Printer P-400/P-330N
August 2000
For more details and the most recent information about these devices, contact an
Olympus authorized service center or visit our Web Page at http://www.olympus.com
180
Appendix 3: Image File Compatibility
Please note the following limitations on using another Olympus digital camera to play
back and print images taken with the CAMEDIA E-10, or playing back images taken with
another Olympus digital camera on the CAMEDIA E-10.
Printing, playing back images taken with CAMEDIA E-10 on other Olympus digital
cameras
Feature
Type Name
Monitor playback
possible*1
C-3030ZOOM, C-3000ZOOM, C-2500L,
C-2100 Ultra Zoom, C-960ZOOM, C-860L*2, C-990ZOOM
Monitor playback, direct
C-2020ZOOM, C-2000ZOOM, C-920ZOOM, C-21
3
printing possible
*
(P-300/P-150 connected)
Not compatible
C-1400XL, C-1400L, C-1000L, C-900ZOOM, C-840L,
C-830L, C-820L, C-420L
1
Only thumbnails can be displayed for some images, depending on their size.
TIFF images cannot be played back.
Direct printing is available only for images that can be correctly displayed full size (1 frame
display) on the camera monitor.
*
*
*
2
3
Playing back images taken with other Olympus digital cameras on the CAMEDIA
E-10
Feature
Type Name
Monitor playback
possible only for still
pictures*1 (no playback C-1000L, C-960ZOOM, C-920ZOOM, C-900ZOOM,
C-3030ZOOM, C-3000ZOOM, C-2500L, C-2020ZOOM,
C-2100 Ultra Zoom, C-2000ZOOM, C-1400XL, C-1400L,
for movies).
C-860L, C-840L, C-830L, C-820L, C-420L, C-21,
C-990ZOOM
1 Playback not available for some image sizes.
*
181
Appendix 4: Troubleshooting
Operational problems
Cannot operate the camera, monitor and control panel blank.
Problem
Solution
Page
White mark on the power switch at the ON
position?
Move the power switch toward you and
position it at the ON position.
©©32
©©128
Has the camera been left idle for over 1 hour If the camera remains in the sleep mode for
with the power on?
over 1 hour, it will power off automatically. Move
the power switch to the OFF position and then
move it back to the ON position to switch the
camera on.
Have the batteries been inserted correctly?
Are the batteries dead?
Remove the batteries and make sure that their
polarities have not been reversed. Re-insert
the batteries correctly.
©©22
Insert fresh batteries. If you are using the
lithium polymer battery or Ni-MH battery,
recharge it.
©©22
Have you been using the camera in cold
weather?
Using the camera at low temperature could
temporarily diminish the capacity of the
batteries. Warm some new batteries in your
pocket and insert them in the camera.
182
Camera does not operate when you press the shutter button?
Problem
Solution
Page
Is “0” and the
panel?
mark blinking in the control
The card is full. Replace the card with a fresh
card, or you can delete unneeded images on the
card to create more storage space on the card,
or you can transfer all the images to a computer,
and then delete all the images, or format the
card.
©©35
If folder numbering has reached 999, or if file
numbering has reached 9999, you will not be
able to continue shooting pictures with the card,
even if it is not full. Transfer all images to a
computer, and then delete all images from the
card.
Is the battery check mark
control panel?
blinking in the
Replace the batteries. Check the card
access lamp. If the card access lamp is
blinking, wait for it to stop blinking before you
remove the batteries.
©©33
Is the memory gauge full?
If you are shooting multiple exposures and
the memory gauge is full, you will not be able
to continue shooting until the pictures have
been stored on the memory card. Wait until
at least one bar on the memory gauge goes
off before you resume shooting.
©©40
Is the flash mark
viewfinder?
blinking in the
The built-in flash is recharging. Wait for the
flash mark to light and then remain on before
you resume shooting with the flash.
©©44
©©70
Is the mode dial set for playback
, print
Set the mode dial to P, A, S, or M.
reserve mode
?
, or setup/connection mode
Is a card inserted in the camera?
Insert a card in the camera.
©©30
Is a protect seal attached to the card?
Remove the card and then remove the
protect seal, or insert a new card.
©©30
183
Appendix 4: Troubleshooting (continued)
The monitor and viewfinder displays are different.
Problem
Solution
Page
Did you press the monitor button
?
Press the monitor button
the monitor.
to switch on
©©37
Is the mode dial set for playback
, print
Set the mode dial to P, A, S, or M.
©©70
reserve mode
?
, or setup/connection mode
Did you put the camera in playback mode by In the playback mode, the played back image
pressing the monitor button twice? is displayed for viewing. Press the monitor
button to restore the camera to the
©©46
shooting mode.
Something other than lines displayed in the
control panel? Cannot operate the camera?
See “Cannot operate the camera, monitor and
control panel blank.”
©©182
Cannot play back images on the monitor.
Problem
Solution
Page
No card is installed in the camera. Insert a
card.
©©30
“NO CARD” is displayed in the monitor?
“NO PICTURE” is displayed in the monitor?
There are no pictures stored on the card.
Make sure that a card that contains images
is inserted, or take a picture.
©©189
Mode dial set to playback
mode dial set to P, A, S, or M, did you
rapidly press the monitor button
? Or with
Set the mode dial to playback
setting the mode dial to P, A, S, or M rapidly
press the monitor button twice.
, or after
©©46
twice?
Something other than lines displayed in the
control panel? Cannot operate the camera?
See “Cannot operate the camera, monitor and
control panel blank.”
©©182
184
Built-in flash does not fire.
Problem
Solution
Page
©©44
Is the built-in flash raised?
Press the flash button
unit.
to raise the flash
©©86
Is the subject brightly lit?
If there is sufficient incident light, the flash
will not fire. If you must use the flash, use the
fill-in flash mode.
Monitor difficult to see.
Problem
Solution
Page
©©144
−
Monitor dark?
Adjust the monitor brightness.
Use your hand to block the glare from
sunlight so you can see the monitor.
Sunlight striking the monitor?
Cannot transfer data to computer.
Problem
Solution
Page
Is the cable connected securely?
Check the connection at the camera and
computer and make sure the connections
are tight.
©©168
Something other than lines displayed in the
control panel? Cannot operate the camera?
See “Cannot operate the camera, monitor
and control panel blank.”
©©182
Is the USB driver correctly installed?
Install the USB driver in accordance with the
installation instructions, and confirm that the
driver recognizes the camera.
©©168
185
Appendix 4: Troubleshooting (continued)
Pictures unsatisfactory
Pictures blurred, out of focus, not sharp.
Problem
Solution
Page
Subject difficult to focus?
Autofocus may not operate correctly for some
subjects. Follow the suggestions described in
“Difficult to focus subjects”.
©©66
Did you release the shutter button and move If you move the camera while pressing down
©©38
the camera?
the shutter button, the picture may be
blurred. This is called camera shake. Hold
the camera steady with both hands with your
elbows at your side and make sure your
fingers are down and grasping the camera.
Practice holding the camera correctly.
Is the subject you want to shoot off center
from the AF target mark?
For autofocusing to work correctly you must
use the AF target mark. Position the subject
you want to focus in the center of the
viewfinder, or use auto lock focus.
©©38
©©65
Is the lens dirty?
Always store the camera in its case when it
is not in use. Clean the lens.
©©9
If you are within 20~60 cm (0.7~2 ft.) from
Is the macro setting correct?
©©42
©©133
the subject, the macro mark
should be
displayed in the control panel. If you are
farther than 60 cm (2 ft.) from the subject
neither the macro mark
nor the conversion
lens mark
should be displayed. If the
conversion lens is attached to the camera,
only the conversion lens mark
displayed.
should be
©©113
Did you stand in front of the camera when
you pressed the shutter button with the
camera in the self-timer mode?
If you stand in front of the camera and press
the shutter button, the camera will focus on
you. Compose the picture by looking through
the viewfinder and then press the shutter
button.
Is the flash mark
viewfinder?
flashing in the
This is the flash warning telling you that
there is not enough light on the subject to
shoot the picture without the flash. Use the
flash.
©©44
186
Pictures are too bright.
Problem
Solution
Page
Is the flash mark
panel?
displayed in the control
When the flash mark
is displayed, the flash
©©86
will fire if the camera is in the fill-in flash mode,
even on a well lighted subject. Switch off the
flash mark, or close the built-in flash.
Is there strong light in the picture?
Adjust the exposure compensation or remove
the source of light from the picture.
©©79
Was there something dark in the center of
the picture?
If the center of the picture was dark, the
overall picture may appear too bright
whatever metering method you use. Try
©©78
©©80
switching to
or center weighted
averaging metering
spot metering
, or you could use
by centering the subject
under the spot metering mark and then using
AE lock to achieve the correct exposure and
then take the shot.
Picture is too dark.
Problem
Solution
Page
Is the flash mark
viewfinder?
blinking in the
If the flash mark
warning that the subject is too dark and you
should use the flash. Use the flash.
is blinking, this is a
©©44
Was the center of the subject very bright?
©©78
©©80
If the center of the picture was very bright,
the overall picture may appear too dark
whatever metering method you use. Try
switching to
or center weighted
averaging metering
spot metering
, or you could use
by centering the subject
under the spot metering mark and then using
AE lock to achieve the correct exposure and
then take the shot.
Part of the picture is missing.
Problem
Solution
Page
Was part of the strap or one of your fingers
blocking the lens?
Make sure nothing blocks the lens when you
compose the picture.
©©36
187
Appendix 4: Troubleshooting (continued)
Colors are odd.
Problem
Solution
Page
Color from the light source?
Open the built-in flash, and set the camera in
the fill-in flash mode ( displayed in the
©©86
control panel) and then take the picture with
the flash.
©©102
Was the white balance setting correct?
Set the white balance setting appropriate for
the subject and then take the picture again.
Date incorrect.
Problem
Solution
Page
Did you set the date and time?
After you purchase the camera, you should
set the date and time.
©©126
Has more than 1 month passed with dead
batteries in the camera?
If dead batteries are left in the camera longer
than 1 month, the date and time settings
could become disabled. Reset the date and
time.
©©126
You have forgotten what settings you selected in the menus.
Problem
Solution
Page
Have you reviewed the current settings?
Open the menus one by one and review the
selected settings. Current settings are
marked in relief in the menus.
©©174
Do you want to restore all default settings?
Press the flash mode button
record mode button together.
and the
©©130
Eyes of subjects reflect red points of light.
Problem
Solution
Page
The reaction of the eye differs among people
and animals and is also affected by the
surrounding brightness of incident light. Set
When shooting a picture of people or
animals with the flash in a dark location, the
blood vessels in the retinas of their eyes
cause their eyes to appear red.
©©86
the flash mode for red-eye reduction
reduce the red-eye phenomenon.
to
188
Appendix 5: Camera Error Messages
If a problem occurs with a memory card, a message will be displayed in the control panel
and the monitor. When a memory card error message is displayed, first remove the card
and then insert it again. If the error message occurs again, refer to the table below to
solve the problem.
Control
Panel
Viewfinder
Monitor
Explanation
Solution
CARD COVER
OPEN
Card compartment
cover is open.
Insert the card and lock the card
compartment cover.
You cannot store
pictures, play back
images, or delete
images from the card.
Remove the card, wipe clean the
electrical contacts, insert the card, and
then try again. If the message is
displayed again, the card can no
longer be used.
CARD ERROR
You may be able to use the card again
if you format it. However, formatting
the card will erase all images stored
on the card.
NO CARD
Card is not present.
Insert the card in the camera.
UNFORMATED
CARD
Card is not formatted
or is damaged.
Format the card. Formatting the card
will erase all images stored on the
card. On the arrow pad, press
select YES, and then press the
button to format the card.
to
WRITE
PROTECT
The card is protected
with an adhesive seal,
or a folder on the card
has been designated
“read-only”. The card
If the card is protected with an
adhesive seal, remove the seal, or if
the card has been selected for
playback only, cancel the playback-
only selection. If this does not solve
has been selected only the problem, the card is operating
for playback, so it
cannot be used for
abnormally. Try to transfer the images
to a computer, or try to copy the
taking pictures, images images to another card installed in the
cannot be deleted, and camera. After copying the images, try
it cannot be initialized.
to format the card again.
NO PICTURE
Playback cannot be
executed because
there are no pictures
stored on the card.
Make sure that a card that contains
images is inserted, or take a picture.
No display
189
Appendix 5: Camera Error Messages (continued)
Control
Viewfinder
Monitor
Explanation
Solution
Panel
CARD FULL
(Card is full.
No space for
storing more
pictures.) *1
Card is full and you
cannot continue
shooting.
Replace the card with a fresh card, or
delete images that you do not need,
or transfer the images to a computer,
and then delete all the images from
the card.
(No more
images can
be stored
on the
Folder numbering has
reached 999, or file
numbering has
reached 9999, so you
cannot continue
shooting.
Replace the card with a fresh card, or
transfer the images to a computer,
and then delete all the images from
the card.
card.)
No display
CARD FULL
Card is full so you
cannot continue
Replace the card with a fresh card, or
delete images that you do not need, or
transfer the images to a computer, and
then delete all images from the card.
selecting or cancelling
pictures for printing.
(Selecting pictures for
printing stores data on
the card.)
Camera interior has
overheated.
No display
No display
Switch the camera off and allow it to
cool, and then switch the camera on
again.
No display No display
PICTURE
ERROR
The selected picture
cannot be displayed for
playback, but be used for
other processing.
Remove the card, wipe clean the
electrical contacts, insert the card and
then try again. If the message is
displayed again, the card can no
longer be used.
You may be able to use the card
again if you format it. However,
formatting the card will erase all
images stored on the card.
No display
No display CANNOT
OPEN FILE
The selected
picture cannot be
displayed for
playback, but be
used for other
processing.
The picture cannot
be displayed for
playback with this
camera.
Select and display the picture on the
camera used to take the picture.
*1
The sizes of the clusters are different on a SmartMedia and CompactFlash card, so you may not be
able to store exactly the same number of images on either card. For this reason, you may not be
able to copy all the images from a full card to the other card, even if it is completely empty. (You will
see the CARD FULL message before copying is completed.) In this case, you should delete some
images that you do not need, or for the target card use a higher capacity card.
190
Glossary of Selected Terms
A mode
Denotes Aperture priority mode. In the A mode you choose the aperture for the effect you want to create in the
picture, and the camera selects the shutter speed.
AC adapter
The alternate power source for the camera. Connect the AC adapter to the DC IN jack on the camera, and then
plug the adapter into a common household wall outlet. When you use the AC adapter, the camera does not use
battery power. Use the AC adapter whenever possible to save the batteries.
AE
Denotes Automatic Exposure. The built-in exposure meter automatically sets the exposure. This camera has three
automatic exposure modes: (1) P mode determines both aperture value and shutter speed, (2) A mode
determines shutter speed automatically based on the aperture value you select manually, (3) S mode determines
the aperture value based on the shutter speed you select manually. When you use the M mode, you set both the
aperture value and the shutter speed manually and the automatic exposure feature is not used.
AF target mark
The AF target mark operates and allows autofocusing to operate correctly even in darkness.
aperture
The adjustable opening behind the lens which controls the amount of light that enters the camera. The larger the
aperture, the shorter the depth of field and the fuzzier the background. The smaller the aperture, the greater the
depth of field and the sharper the background. Aperture is measured in f/stops. Larger aperture values indicate
smaller apertures, smaller aperture values indicate larger apertures.
autofocus
With automatic focusing, you can concentrate more on the framing and composition of the picture. Half-press the
shutter button to engage autofocus and keep your finger on the shutter button. After the subject is sharp, wait for
the expression or action you want, and then full-press the shutter button to take the picture. The AF target mark is
in the center of the viewfinder, so autofocusing may not be possible with an off-center subject. In this case, cover
the subject with the AF target mark in the viewfinder and half-press the shutter button. With the shutter button still
half-pressed, move the camera and compose the picture in the viewfinder. Then, full-press the shutter button.
bracketing
A technique commonly used to explore more than one possible exposure to ensure achieving the desired effect. In
order to bracket, you can manually (1) vary the f/stop from the one indicated, (2) vary shutter speed at the same
f/stop (3) change the ISO setting or (4) You can set this camera for automatic bracketing. Using automatic
bracketing, the camera will take several exposures while automatically varying the exposure plus and minus.
CAMEDIA Master
A software application provided for downloading images from the camera to a computer. Other useful features are
provided for viewing and enhancing images.
CCD (Charge-coupled device)
A solid-state array of picture elements. The camera lens focuses incoming light onto the CCD, and the CCD
converts the light quantity at each pixel into a corresponding electronic signal.
center weighted averaging metering
A light metering mode or technique that uses an average of the center and periphery of the image area but is
biased toward the information at the center of the image area. This method is best used when the brightness of
the center and periphery of the image area does not vary greatly. See also digital ESP metering and spot
metering.
close-up
Taking pictures with the camera very close to the subject. With this camera you can take pictures within the range
20~60 cm (8 inches~23.5 inches) in the macro mode. When shooting close-ups with long exposures, make sure
that the subject is still and that the camera is steady to avoid camera shake.
191
Glossary of Selected Terms (continued)
color temperature
The spectral balance of different white light sources is rated numerically by color temperature—a concept of
theoretial physics that, with incandescent lighting, corresponds roughly to the absolute lamp filament temperature,
expressed on the Kelvin (K) temperature scale. The higher the color temperature, the richer the light in bluish and
the poorer in reddish; the lower the color temperature, the richer the light in reddish and the poorer in bluish. You
may encounter difficulties with color reproduction when shooting indoors under fluorescent lighting, or where
sunlight and fluorescent lighting are both present. Your camera is provided with a white balance adjustment feature
that you can use to compensate for the odd effects of color combinations of color you may occasionally see in
your pictures.
CompactFlash
A memory card which can be inserted in the camera for storing images. The number of images that you can store
on one card depends on the size of the images which is determined by the record mode setting (quality,
resolution, compression) when the pictures are taken.
CompactFlash memory card adapter
A device which enables a computer to read images from the memory card. The memory card is removed from the
camera and inserted into the memory card adapter, then the memory card adapter with the memory card inserted
are loaded in the card slot of the computer.
DCF
Denotes Design rule for Camera Files. A camera file system standard employed with this camera and other digital
cameras.
difficult subjects
These are subjects which are difficult to focus with the autofocus and autoexposure features. Generally, you may
find it difficult to use autofocus with (1) subjects of low contrast, (2) subjects immersed in very bright light, (3)
subjects without vertical lines, (4) subjects at different distances from the camera, (4) and fast moving subjects.
Digital ESP metering
ESP denotes Electro Selective Pattern. The picture composed in the viewfinder is divided into several equal
sections and then the metered readings of these sections are averaged. A sunset or sunrise is ideal for this
method of metering because each section of the picture is metered separately and then averaged so the sun does
not disrupt the reading.
diopter adjustment
Allows eyeglass wearers to focus the AF target mark in the viewfinder. If you wear eyeglasses and the AF target
mark is difficult to see in the viewfinder, adjust the view with the diopter adjustment ring. Turn the diopter
adjustment ring until you see the AF target mark come into sharp focus.
DPOF
Means Digital Print Order Format. A format standard used by DPOF-compatible printers employed by printing
services which allow you to get more reliable photofinishing services using memory cards. You can specify which
pictures that you want printed, whether to stamp the prints with the time or date, the number of copies to print, and
whether prints are to be single or multiple (index printing).
EV
An abbreviation for Exposure Value. EV=0 with the aperture stopped at f/1 and shutter speed is set for 1 second
with ISO at 100. The EV value increases by 1 as the aperture is stopped up by 1 stop, or if shutter speed is
increased by 1 step. Conversely, the EV value decreases by 1 for every aperture stop below 1, or if shutter speed
is decreased 1 step. If the ISO is adjusted, EV increases by one if the ISO setting is doubled, and decreases by 1
if the ISO setting is halved.
exposure
Generally the amount of light used to create an image. The amount of light is controlled by the shutter speed and
the size of the aperture when the picture is taken.
exposure compensation
Manually increasing or decreasing the exposure which has been set by AE (automatic exposure). When exposure
is increased, this is called plus compensation, and when decreased, this is called minus compensation.
file format
Usually refers to the file structure of images and documents. This camera can handle images in three formats:
TIFF, JPEG, and RAW. The TIFF and JPEG formats are standard computer graphic file formats and can be used
with most graphic software applications.
192
Fill-In flash
Fires flash regardless of the metered light reading. Use to shoot dark subjects in front of strong backlight.
FlashPath Floppy Disk Adapter
A small device which holds a SmartMedia card and is then inserted into the floppy disk drive of the computer in
order to copy images from the SmartMedia card to the computer.
fluorescent light
Commonly used in offices and factories, fluorescent lights can produce unnatural color balance in pictures. Also,
different types of fluorescent lights can produce different color effects. Also see “white balance”.
focal length
The distance of the point of focus from the surface of the lens inside the camera. The shorter the focal length of a
lens, the greater the angle of view. The longer the focal length of a lens, the narrower the angle of view.
focus
Bringing the subject of a picture into sharp, clear definition. With a SLR type camera, when the image in the
viewfinder is clearly focused, the photographer is also assured that the lens is also correctly focused on the
subject.
focus locking
Half-pressing the shutter button while aiming at a subject that is different from the intended subject, but at the
same distance as the subject that is difficult to autofocus on. When focus is locked, you then recompose on the
intended subject while keeping the shutter button at half press and then full pressing the shutter button to take the
picture.
formatting a memory card
Formatting also refers to initializing a SmartMedia or CompactFlash memory card after you buy it so it can be
used with the camera or formatting the card to erase all images stored on the card.
histogram
A simple graphic which displays the distribution of bright and dark pixels in the viewed image.
ICC Profile Format
A file format provided by the International Color Consortium (ICC), formed in the early 1990’s. The profile format is
used to convert color data between native device color spaces and device independent color spaces in order to
achieve better color management of data created on input, display, and output devices.
incident light
The amount of light falling on the subject.
ISO
Refers to the sensitivity of 35 mm film, commonly referred to as film speed. The scale of sensitivity, standardized
by the International Standards Organization (ISO), assigns numbers in ascending order to reflect the increasing
sensitivity of the film. The higher the ISO number, the greater the sensitivity, with ISO 100 considered normal. This
same concept is also applied to your digital camera to reflect the sensitivity of the image capture device (CCD).
Even though the camera does not use film. ISO is the internationally accepted rating system for film speeds,
replacing ASA and DIN.
JPEG
Denotes Joint Photographic Experts Group. The compression standard used for compressing color images. The
image data from pictures taken with your camera are stored on the memory cards in JPEG format when SHQ,
HQ, or SQ is selected for the record mode. Most computer software applications and Internet browsers can read
and view images in JPEG format. JPEG format is convenient for storing and handling files due to its small file size.
However, if you intend to enhance an image with a graphics software application, we recommend that you save
the image in TIFF or other format because the quality of JPEG images tend to degrade as they are repeatedly
opened and closed for processing.
M mode
Denotes Manual mode. Allows you to set the aperture and shutter speed manually without using automatic
exposure.
macro
Use the macro mode for close-up photography of objects within 20 cm~60 cm (8 inches~23.5 inches) from the
camera lens.
193
Glossary of Selected Terms (continued)
manual focusing
Allows you to focus on a subject manually with the manual focus ring.
memory card
The camera uses two types of memory cards: SmartMedia and CompactFlash. One of each type can be inserted
in the camera at the same time.
metering mode
Measures the brightness of the subject before the picture is taken. With this camera there are three metering
modes: (1) Digital ESP, (2) Center weighted averaging, (3) Spot.
Monitor
The LCD Monitor on the camera can display recorded pictures; be used as a viewfinder, and provide informational
displays about shooting modes or picture information of recorded pictures.
P mode
Denotes Program mode. With the automatic exposure feature, the camera selects what it considers to be the
correct combination of shutter and aperture for the picture currently composed in the viewfinder.
PC card adapter
A device which allows you to read a SmartMedia or CompactFlash card with a personal computer. The memory
card is inserted into the adapter, then the adapter is inserted into the card slot of the computer.
playback
Refers to viewing images stored on the memory cards.
protect
Marking images files on a memory card so they cannot be accidentally erased. Marking an image for protection
does not protect it from erasure if the card is reformatted. To protect a memory card, attach an adhesive protect
seal to the card. Individual image files can also be protected using the camera’s controls.
Quality
The quality of the image is based on the number of pixels used to construct the image file. With your camera four
settings are possible, and these settings are (in ascending order of better quality): SQ (standard quality), HQ (high
quality), SHQ (super high quality), and TIFF (tagged image file format).You should remember that the better the
quality, the larger the size of the file and the larger the file the more space required for storing the file on the
memory card. For example, the file size of a picture taken at SHQ will be much larger than a picture taken at HQ.
quick reference white balancing
In this mode, the camera memorizes a white light source as a reference for balancing white against overall color of
the image.
RAW
Refers to raw data, data which has not been enhanced with a camera option like white balance, sharpness,
contrast, etc. This file format has been developed by Olympus for viewing and processing with our own software.
You may not be able to open or process these files with other graphics software applications, and these files
cannot be selected for DPOF printing. RAW files are assigned an orf file extension (*.orf).
record mode
The record mode refers to the three settings that will affect the captured image: Quality, Resolution, and
Compression.
red-eye
Red-eye occurs when the flash is directly in line with the eyes of people or animals during flash photography. The
flash is reflected from the red blood vessels on the retina at the back of the eye, causing a red glow in the eyes of
the subjects in the picture. To avoid the red-eye effect, set the camera in the red-eye reduction flash mode before
taking a flash picture. The red-eye effect does not occur when the flash is used on brightly lit subjects, or when
using an external flash unit which can be used to change the angle of the flash.
remote control
Allows you to trigger shutter release from a distance so you can include yourself in the picture. With this camera
you can use an electronic remote unit or a remote cable attached to the camera.
S mode
Denotes Shutter priority mode.You choose the shutter speed for the effect you want to create in the picture, and
the camera automatically selects the aperture with the autoexposure feature.
194
self-timer
Delays shutter release for 12 seconds after you full-press the shutter button so you have enough time to include
yourself in the picture.
sharpness
The degree of clarity or definition of the boundaries in an image. With your camera, the overall sharpness can be
set for NORMAL, SOFT, and HARD.
shooting mode
The camera has different operating modes from which you can choose: Program (P), Aperture priority (A), Shutter
priority (S), and Manual (M).
shutter speed
The shutter controls the effect of movement by the subject in the picture. It can either freeze the action with a fast
shutter speed, or give the impression of blurred movement with a slow shutter speed. The shutter speed selected
will also affect overall exposure of the image.
SmartMedia
A media card just 0.76 mm thick, but capable of storing up 4~64 MB of image data. 3.3 V and 5 V SmartMedia
memory cards are available; your camera employs only the 3.3 V type.
spot metering
The meter reading is taken from a very small area around the center of the subject, defined by the spot metering
area mark in the viewfinder. Spot metering is ideal for use in difficult light conditions, or when the important
element of the picture (subject’s face) is small. Use spot metering for backlit subjects, or sports and stage
performers. See also digital ESP metering and center weighted averaging metering.
storable pictures
The number of pictures which can be stored on the memory card. The number of pictures that you can store on
one card is first determined by the capacity of the card. The number of storable pictures greatly varies with the
record mode (quality, resolution, and compression) setting that you select before taking pictures.
subject
The person or object that you want to shoot. Normally, you cover the subject with the AF target mark in the
viewfinder, half-press the shutter button to focus the subject automatically, and then full-press the shutter button to
take the picture. See also difficult subjects.
TIFF
Denotes Tagged Image File Format. A format for storing non-compressed image data in black and white,
grayscaled, or color. This format is commonly used by scanner and graphics software applications. Your camera
can store images in color TIFF format but the size of TIFF files are much larger than files compressed in the JPEG
format.
TTL flash metering
A sensor in the camera measures the amount of light at the moment of exposure and determines the amount of
flash output while taking into account the amount of existing light. TTL means through the lens.
viewfinder
The viewer that you look through to frame and compose a picture.
white balance
Allows you to change color tone in pictures. By setting the white balance, images are not affected by surrounding
light, something you should always consider when taking pictures under fluorescent lighting. You can use
automatic, quick reference, or preset white balancing. Use preset white balancing when colors do not come out
right with automatic or quick reference white balancing.
zoom ring
Move the zoom ring towards T to zoom in on the subject and enlarge it in the viewfinder, or move it towards W to
zoom out and make it smaller in the viewfinder.
195
Index
how it works ............................... 64
mark in viewfinder ...................... 17
subject not centered in viewfinder .. 57
substitute focusing ............... 57, 65
using ........................................... 64
with shutter button ................ 38, 39
naming files on ......................... 154
naming folders on ..................... 154
not formatted warning ................ 35
number of storable pictures ....... 34
protecting ................................... 50
reading devices for ................... 172
removing .................................... 31
selecting all images for printing .. 160
selecting for picture storage ..... 121
selecting individual pictures for printing .. 158
SmartMedia ................................ 30
storage capacity ......................... 34
card access lamp
blinking during save ................... 52
card cover lock
location ....................................... 14
card error
mark in control panel ................. 16
CARD FULL
monitor message .............. 147, 149
CD-ROM installer, software
provided with camera ................. 20
center weighted averaging
metering
!
2nd-curtain
mark in control panel ................. 16
A
A mode
Aperture priority mode ............... 70
setting aperture manually........... 73
AA Ni-Cd
inserting...................................... 25
AA Ni-MH
inserting...................................... 25
B
background focus
aperture value ............................ 57
batteries
before loading ............................ 22
cautions ...................................... 22
checking power .......................... 33
handling ...................................... 22
inserting AA Ni-Cd ..................... 25
inserting AA Ni-MH .................... 25
inserting lithium battery CR-V3 .. 23, 24
inserting lithium polymer batteries .. 26
listed ........................................... 22
low battery warning .................... 39
safety guidelines ........................ 22
service life .................................. 22
storing ........................................ 22
battery check
mark in control panel ................. 16
monitoring battery power ........... 33
battery compartment
location ....................................... 15
AC adapter
connecting .................................. 27
connecting/disconnecting ........... 27
safety guidelines ........................ 27
using ........................................... 27
AE lock
mark in viewfinder ...................... 17
AE lock button
location ....................................... 14
AEL
automatic exposure lock ............ 80
AF
see “autofocus”........................... 64
AF correct
warning ....................................... 41
AF correct mark
mark in viewfinder ...................... 17
AF target mark
mark in viewfinder ...................... 17
defined ....................................... 78
mark in control panel ................. 16
mark in viewfinder ...................... 17
CF
CompactFlash card .................. 121
box contents
check list .................................... 20
bracketing
automatic .................................... 81
defined ....................................... 81
multiple exposures ..................... 81
cleaning
camera body ................................ 9
lens ............................................... 9
close-up
range .......................................... 43
using macro mode ..................... 42
close-up photography
macro mode ............................... 59
with conversion lens ................. 134
aperture
allowed for TELE ........................ 73
allowed for WIDE........................ 73
blurred background .................... 72
described .................................... 72
displaying current setting ......... 139
setting ................................... 72, 73
setting manually ......................... 76
sharp background ...................... 72
shooting modes .......................... 70
brightness
metering ..................................... 78
built-in flash
location ....................................... 14
color
natural color ............................... 98
white balance ............................. 98
C
camera
color temperature
available options for ................. 180
box contents ............................... 20
caring for ...................................... 9
cleaning ........................................ 9
compatible conversions lenses available . 133
connecting to a computer ......... 168
connecting to TV screen .......... 142
holding ........................................ 36
important features ........................ 2
parts names ......................... 14, 15
setting date and time ................ 126
setting operation warning sound ... 124
setting shutter release sound ... 122
setting sleep mode ................... 128
specifications .................... 178, 179
switching off ............................... 52
switching on ............................... 32
Aperture priority mode
setting aperture manually........... 73
aperture value
automatically selected in P mode .. 71
background focus ....................... 57
mark in control panel ................. 16
mark in viewfinder ...................... 17
portraits ...................................... 54
arrow pad
location ....................................... 15
Kelvin scale ................................ 99
selecting for white balance ....... 102
setting scale ............................... 99
white balance ............................. 99
CompactFlash card
control panel (CF) .................... 121
formatting card ......................... 152
inserting...................................... 31
PC Card Adapter ...................... 172
removing .................................... 31
selecting ................................... 121
AUTO
compression
file/folder naming ...................... 154
naming image files ................... 154
selecting for file/folder naming .. 155
image ....................................... 103
quality, resolution ..................... 103
recording mode ........................ 103
reference table ......................... 104
selecting ................................... 105
setting ....................................... 104
storage capacity ......................... 34
auto bracket
mark in control panel ................. 16
auto flash mode
selecting ..................................... 86
auto white balance
described .................................... 98
autofocus
difficult subjects .......................... 66
half-press ............................. 38, 39
card
CompactFlash ............................ 30
copying images to another card . 146
deleting all images from ........... 150
formatting ................................. 152
full warning ................................. 35
inserting...................................... 30
connector cover
location ....................................... 14
contrast
function ..................................... 107
196
monitor display ......................... 107
selecting ................................... 107
control panel
deleting
all images ................................. 150
all pictures from card.................. 51
images that cannot be deleted .. 151
non-DCF format images ........... 151
selected pictures from card ........ 51
F
file name
displaying current setting ......... 139
2nd-curtain ................................. 16
aperture ...................................... 73
aperture value ............................ 16
auto bracket................................ 16
automatic power off .................... 33
battery check .............................. 16
brightness adjustment ................ 32
card error.................................... 16
center weighted averaging metering .. 16
CF: CompactFlash card ........... 121
conversion lens .......................... 16
digital ESP metering .................. 16
fill-in flash ................................... 16
flash intensity control ................. 16
image adjustment (sharpness, contrast) .. 16
ISO ............................................. 16
ISO setting ................................. 83
location ....................................... 14
macro ......................................... 16
manual focus .............................. 16
memory gauge ........................... 16
metering mode ........................... 16
number of storable pictures ....... 16
quality ......................................... 16
red-eye reduction ....................... 16
remote control ............................ 16
selected memory card ................ 16
self-timer .................................... 16
sequential mode mark .............. 112
sequential shooting .................... 16
shutter speed ................. 16, 75, 76
slow synchro .............................. 16
SM: SmartMedia card .............. 121
spot metering ............................. 16
summary .................................... 16
white balance ..................... 16, 102
files
AUTO naming ........................... 154
compatibility with other cameras .. 181
naming ..................................... 154
RESET naming ........................ 154
selecting AUTO naming ........... 155
selecting RESET naming ......... 155
difficult subject
autofocus .................................... 66
center glare ................................ 66
fast moving subject .................... 67
low contrast ................................ 66
no vertical lines .......................... 67
two objects at different distances .. 66
fill-in flash
function ....................................... 87
mark in control panel ................. 16
digital ESP metering
flash
defined ....................................... 78
mark in control panel ................. 16
mark in viewfinder ...................... 17
Auto Flash .................................. 88
auto flash mode ......................... 86
built-in and external flash together .. 91
control modes............................. 86
displaying current setting ......... 139
external flash .................. 91, 92, 93
fill-in flash ............................. 87, 88
flash control compensation ........ 90
modes ........................................ 86
raising flash unit ......................... 44
red-eye reduction ................. 87, 88
shutting off.................................. 89
slow synchronization .................. 88
slow synchronization mode ........ 86
using built-in flash ...................... 44
when cannot be used ................. 89
with time-lapse photography .... 119
working range of built-in flash .... 45
diopter adjustment ring
adjusting ..................................... 36
location ....................................... 14
display time
image during recording ............ 125
setting ....................................... 125
distance
distance and range .................... 43
distortion..................................... 43
distance meter
location ....................................... 15
drive button
location ....................................... 14
E
flash button
enlarged display
playback ..................................... 48
erase button
deleting pictures ......................... 51
location ....................................... 15
error messages
problems and solutions .... 189, 190
summary table.................. 189, 190
location ....................................... 14
raising built-in flash .................... 44
flash control
mark in control panel ................. 16
flash control compensation
controlling flash intensity ............ 90
selecting ..................................... 90
conversion lens
close-up photography ............... 134
conversion lenses available ..... 133
mark in control panel ................. 16
selecting conversion lens mode .. 135
flash control mode
exposure
auto flash.................................... 86
fill-in flash ................................... 88
red-eye reduction ....................... 88
slow synchronization .................. 86
adjusting ..................................... 79
bracketing ................................... 81
compensation ............................. 79
locking ........................................ 80
copy selected
displaying current setting ......... 139
copying
all images to another card ....... 146
cancelling ................................. 149
DCF format ....................... 147, 149
images taken with other cameras
......................................... 147, 149
selected images ....................... 148
selecting images for ................. 148
flash mode button
exposure compensation
displaying current setting ......... 139
setting ......................................... 79
exposure compensation button
location ....................................... 14
exposure compensation setting
mark in viewfinder ...................... 17
location ....................................... 14
flash warning
mark in viewfinder ...................... 17
focus
center glare ................................ 66
difficult subjects .......................... 66
fast moving subject .................... 67
low contrast ................................ 66
manual focusing ......................... 68
no vertical lines .......................... 67
objects at different distances ..... 66
subject not in center of viewfinder .. 65
substitute focusing ..................... 65
CR-V3
external flash
inserting................................ 23, 24
cautions for non-dedicated flash units .. 94
dedicated external flash ............. 92
FL-40 .................................... 92, 93
non-dedicated flash units ..... 94, 95
restrictions on non-dedicated flash units .. 94
using with built-in flash ......... 91, 92
D
date
date stamping for prints ........... 164
setting date and time................ 126
setting format ........................... 126
viewing current date setting ..... 126
focus mode
external flash connector
location ....................................... 14
eyepiece shutter lever
function ..................................... 113
location ....................................... 14
using with remote cable ........... 116
using with remote shutter release .. 114
using with self-timer ................. 113
using with time-lapse photography .. 118
selecting ..................................... 68
focus mode switch
DC IN jack
location ....................................... 14
DCF file information
displaying current setting ......... 139
DCF format
copying images in ............ 147, 149
deleting non-DCF format images .. 151
location ....................................... 14
setting ......................................... 68
folder name
displaying current setting ......... 139
folders
AUTO naming ........................... 154
naming ..................................... 154
RESET naming ........................ 154
default settings
restoring ................................... 130
197
Index (continued)
selecting AUTO naming ........... 155
selecting RESET naming ......... 155
format
setting date format ................... 126
formatting
card .......................................... 152
frame number
displaying current setting ......... 139
mark in control panel ................. 16
setting ......................................... 83
ISO setting
night scenes ............................... 60
WRITE PROTECT .................... 147
metering
brightness ................................... 78
center weighted averaging ......... 78
digital ESP.................................. 78
methods ..................................... 78
selecting method ........................ 78
spot ............................................ 78
metering mode
mark in control panel ................. 16
mark in viewfinder ...................... 17
metering mode button
location ....................................... 14
mode dial
location ....................................... 14
selecting shooting mode ............ 70
L
lens
cleaning ........................................ 9
location ....................................... 15
G
lens cap
provided with camera ................. 20
lens hood
provided with camera ................. 20
light button
control panel brightness ............. 32
location ....................................... 14
lithium batteries
provided with camera ................. 20
lithium polymer batteries
inserting batteries....................... 26
low battery warning
described .................................... 39
low-light warning
flashing in viewfinder .................. 44
shutter does not release ............ 45
group pictures
subjects, background both in focus .. 57
H
half-press
locking exposure ........................ 80
histogram
displaying during playback ....... 109
function ..................................... 108
switching on/off ........................ 108
taking pictures with .................. 108
hot shoe
location ....................................... 14
monitor
adjusting brightness ................. 144
displaying image information.... 138
enlarged display ......................... 48
framing a picture ........................ 37
index display............................... 48
location ................................. 14, 15
metering mark ............................ 78
multiple playback ........................ 48
white balance ..................... 99, 102
HQ
compression ............................. 103
high quality ............................... 103
resolution .................................. 103
storage capacity ......................... 34
monitor button
M
M mode
Manual mode ............................. 70
setting aperture manually........... 73
setting aperture value ................ 76
setting shutter speed .................. 76
location ....................................... 15
monitor lock/release button
location ....................................... 15
multiple exposures
I
image
setting camera for .................... 112
multiple-exposure
with time-lapse photography .... 119
compression ..................... 103, 104
display time during recording ... 125
histogram.................................. 108
quality ....................................... 103
record mode ............................. 103
resolution .......................... 103, 104
selecting card for storage ......... 121
sharpness ................................. 106
macro
mark in control panel ................. 16
macro button
N
close-up ...................................... 42
location ....................................... 14
mark in viewfinder ...................... 17
night scenes
ISO setting ................................. 60
manual focus .............................. 60
shooting ................................ 60, 61
shutter speed ............................. 60
macro mode
close-up photography ................. 59
with conversion lens ................. 134
main dial
function ................................. 14, 49
image adjustment (sharpness,
contrast)
mark in control panel ................. 16
image information
displaying on monitor ............... 138
NO CARD
monitor message .............. 147, 149
number of storable pictures
mark in control panel ................. 16
manual focus
images
manual focus ring ....................... 68
mark in control panel ................. 16
night scenes ............................... 60
releases macro mode ................ 68
sunsets, fireworks ...................... 62
using ........................................... 68
deleting all from card................ 150
naming ..................................... 154
naming files for ......................... 154
naming folders for .................... 154
selecting copies for printing ..... 158
selecting for copying ................ 148
selecting for printing ................. 158
transferring to a computer ........ 168
O
options
available for camera ................. 180
P
manual focus ring
location ....................................... 14
using with manual focus ............. 68
P mode
aperture value selected .............. 71
Program mode ........................... 70
shutter speed selected ............... 71
index display
playback ............................... 48, 49
selecting images for copying .... 148
memory gauge
described .................................... 40
full ............................................... 40
mark in control panel ................. 16
P,A,S,M
index printing
shooting mode............................ 70
cancelling ................................. 163
setting up.................................. 162
taking a picture after selecting .. 163
pictures
menu button
location ....................................... 15
menus
deleting all pictures from card .... 51
deleting from card ...................... 51
deleting selected pictures from card .. 51
number storable on card ............ 34
INFO button
displaying image information.... 138
location ....................................... 15
Playback mode menu summary . 176
displaying ......................... 174, 175
Print reserve mode menu summary .. 176
setup/connection mode menu summary . 176
shooting mode menu (P,A,S,M
modes) summaries................... 175
summary .......................... 174, 175
messages
CARD FULL ............................. 147
NO CARD ................................. 147
playback
inserting
displaying image information.... 138
enlarged display ......................... 48
index display............................... 48
multiple picture display ............... 48
Playback mode menu summary .. 176
single picture display .................. 46
slide show ................................ 140
card ............................................ 30
CompactFlash ............................ 30
SmartMedia ................................ 30
ISO
control panel............................... 83
displaying current setting ......... 139
198
time-lapse photography ............ 119
viewing pictures .......................... 46
with histogram .......................... 109
portraits
aperture value ............................ 54
shooting ...................................... 54
selecting ................................... 105
SHQ ......................................... 103
SQ ............................................ 103
storage capacity ......................... 34
TIFF .......................................... 103
quick reference white balance
described .................................... 98
mark in viewfinder ...................... 17
procedure ................................. 101
self-timer
cancelling ................................. 113
function ..................................... 113
mark in control panel ................. 16
setting ....................................... 113
sequential mode
selecting ................................... 112
sequential shooting
power
auto power off after 1 hour ....... 128
switching camera off .................. 52
switching on camera .................. 32
mark in control panel ................. 16
setup/connection mode menu
menu summary ........................ 176
R
power switch
range
location ....................................... 14
switching camera off .................. 52
switching on camera .................. 32
sharpness
distance and range .................... 43
distortion..................................... 43
function ..................................... 106
monitor display ......................... 106
selecting ................................... 106
settings ..................................... 106
RAW
preset white balance
function ..................................... 131
releases quality settings ........... 131
selecting RAW mode ................ 131
described .................................... 98
mark in viewfinder ...................... 17
procedure ................................. 102
shooting a picture
...........................
backlit subjects
55
record mode
Print reserve mode menu
menu summary ........................ 176
print selected
displaying current setting ......... 139
close-up ...................................... 59
daylight shadow ......................... 56
daylight synchro ......................... 56
moving subjects ......................... 58
night scenes ............................... 60
portraits ...................................... 54
subject against night scene background .. 61
subject and background focus ... 57
sunsets ....................................... 62
through monitor .......................... 37
through viewfinder ...................... 36
compression ..................... 103, 104
displaying current setting ......... 139
quality ....................................... 103
resolution .......................... 103, 104
setting ....................................... 105
storage capacity ......................... 34
printing
cancelling index printing ........... 163
cancelling printing all images ... 161
cancelling selections for ........... 159
changing number of copies ...... 159
date stamping........................... 164
printer options available ........... 166
printers you can use ................. 166
selecting all images on card .... 160
selecting all pictures for ........... 160
selecting individual pictures for .. 158
selecting number of copies ...... 158
setting up index printing ........... 162
time stamping ........................... 164
record mode button
location ....................................... 14
red-eye reduction
function ....................................... 87
mark in control panel ................. 16
shooting mode
aperture ...................................... 70
aperture priority mode ................ 70
manual mode ............................. 70
multiple exposures ................... 112
program mode ............................ 70
remote ...................................... 115
selecting ..................................... 32
self-timer .................................. 113
sequence (multiple exposures) .. 112
shutter priority mode .................. 70
shutter speed ............................. 70
remote cable
function ..................................... 116
shutter release ......................... 117
using ......................................... 116
remote cable jack
location ....................................... 14
remote control
mark in control panel ................. 16
provided with camera ................. 20
remote control instructions
provided with camera ................. 20
remote unit
cancelling ................................. 115
using ......................................... 114
working range ........................... 114
remote/self-timer lamp
location ....................................... 15
removing
CompactFlash ............................ 31
SmartMedia ................................ 31
problems
Card 0 blinking in viewfinder ...... 40
AF correct warning ..................... 41
bright spots in pictures ............... 72
card error.................................. 112
CARD FULL ..................... 147, 149
flash will not fire ......................... 45
focusing fast moving subjects .... 67
focusing low contrast subject ..... 66
focusing two objects at different distances .. 66
focusing with center glare .......... 66
focusing without vertical lines .... 67
NO CARD......................... 147, 149
remote unit ............................... 115
shutter does not release ............ 45
subject out of focus .................... 66
TV screen image black frame .. 143
TV screen images off center .... 143
WRITE PROTECT ........... 147, 149
shooting mode menu
summary .................................. 175
shooting techniques
backlit subjects ........................... 55
close-up ...................................... 59
daylight shadow ......................... 56
daylight synchro ......................... 56
fireworks ..................................... 62
moving subjects ......................... 58
night scenes ............................... 60
portraits ...................................... 54
subject against night scene background .. 61
subject and background focus ... 57
RESET
file/folder naming ...................... 154
naming image files ................... 154
selecting for file/folder naming . 155
SHQ
protect
compression ............................. 103
resolution .................................. 103
storage capacity ......................... 34
super high quality ..................... 103
resolution
displaying current setting ......... 139
formatting a card ........................ 50
pictures on card ......................... 50
removing from pictures .............. 50
setting for card ........................... 50
setting for pictures ...................... 50
image ....................................... 103
quality, compression................. 103
recording mode ........................ 103
reference table ......................... 104
selecting ................................... 105
setting ....................................... 104
storage capacity ......................... 34
shutter button
autofocus .............................. 38, 39
full-press ............................... 38, 39
half-press ............................. 38, 39
location ....................................... 15
operation .............................. 38, 39
protect button
location ....................................... 15
S
Q
Shutter priority mode
setting shutter speed .................. 75
shutter release
operation .............................. 38, 39
sound emitted on release......... 122
S mode
quality
setting shutter speed .................. 75
Shutter priority mode .................. 70
HQ ............................................ 103
image ....................................... 103
mark in control panel ................. 16
recording mode ........................ 103
selected memory card
mark in control panel ................. 16
199
Index (continued)
shutter sound
strap eyelet
USB connector
setting ....................................... 122
location ................................. 14, 15
location ....................................... 14
USB driver
shutter speed
sub dial
function ................................. 14, 49
location ....................................... 14
automatically selected in P mode .. 71
control panel......................... 75, 76
described .................................... 74
displaying current setting ......... 139
fast.............................................. 58
mark in control panel ................. 16
mark in viewfinder ...................... 17
moving subjects ......................... 58
night scenes ............................... 60
setting ......................................... 75
setting manually ......................... 76
shooting modes .......................... 70
shooting moving subjects ........... 74
slow ............................................ 58
slow with time-lapse photography .. 119
viewfinder ............................. 75, 76
required for image transfer ....... 169
V
subject
blurred movement ...................... 74
freezing ...................................... 74
moving .................................. 58, 74
not centered in viewfinder .......... 57
not in center of viewfinder .......... 65
subjects difficult to focus ............ 66
substitute focusing ..................... 57
video cable
provided with camera ................. 20
video OUT jack
location ....................................... 14
viewfinder
adjusting ..................................... 36
AE lock ....................................... 17
AF correct mark ......................... 17
AF correct warning ..................... 41
AF target mark ........................... 17
aperture ...................................... 73
aperture value ............................ 17
center weighted averaging metering .. 17
composing a picture ................... 36
digital ESP metering .................. 17
exposure compensation setting .. 17
flash warning .............................. 17
location ....................................... 14
low-light warning ........................ 44
macro ......................................... 17
metering mark ............................ 78
metering mode ........................... 17
preset white balance .................. 17
quick reference white balance.... 17
shutter speed ................. 17, 75, 76
spot metering ............................. 17
spot metering area ..................... 17
summary .................................... 17
white balance ........................... 102
substitute focusing
focusing difficult subjects ........... 66
procedure ................................... 65
T
taking pictures
shutter release ..................... 38, 39
without half-press ....................... 39
sleep mode
auto power off after 1 hour ....... 128
function ..................................... 128
setting timer.............................. 128
TIFF
compression ............................. 103
resolution .................................. 103
storage capacity ......................... 34
slide show
starting ..................................... 140
slow synchro
mark in control panel ................. 16
slow synchronization mode
flash ............................................ 86
time
displaying time picture taken .... 139
setting date and time ................ 126
time stamping for prints ............ 164
viewing current time setting ..... 126
SM
SmartMedia card ...................... 121
time-lapse photography
SM/CF memory card button
location ....................................... 14
SmartMedia card
actual time interval ................... 120
cancelling ................................. 119
described .................................. 118
multiple exposures ................... 119
setting eyepiece shutter lever .. 118
setting timer interval ................. 118
setting up.................................. 118
slow shutter speed ................... 119
using flash ................................ 119
viewing pictures already taken .. 119
control panel (SM) .................... 121
Floppy Disk Adapter FlashPath MAFP-2N . 172
formatting card ......................... 152
inserting...................................... 30
PC Card Adapter MA-2 ............ 172
provided with camera ................. 20
Reader/Writer MAUSB-1 .......... 172
removing .................................... 31
selecting ................................... 121
SmartMedia labels
provided with camera ................. 20
SmartMedia protect seals
provided with camera ................. 20
SmartMedia static-free case
provided with camera ................. 20
software CD-ROM
provided with camera ................. 20
specifications
camera ............................. 178, 179
spot metering
viewing pictures
see “playback” ............................ 46
W
warning sound
setting ....................................... 124
white balance
transferring
auto .................................... 98, 100
color temperature ....................... 99
control panel............................. 102
described .................................... 98
displaying current setting ......... 139
mark in control panel ................. 16
monitor ............................... 99, 102
preset ................................. 98, 102
quick reference ................... 98, 101
selecting color temperature manually .. 102
setting auto white balance ....... 100
setting manually ....................... 102
setting with quick reference...... 101
sunsets, fireworks ...................... 62
using ......................................... 100
viewfinder ................................. 102
with flash .................................... 99
images to a computer .............. 168
USB driver ................................ 169
what you need .......................... 168
tripod socket
location ....................................... 15
troubleshooting
camera will not operate ............ 182
colors are odd .......................... 188
control panel blank ................... 182
date incorrect ........................... 188
cannot transfer data to computer .. 185
flash will not fire ....................... 185
monitor difficult to see .............. 185
pictures blurred ........................ 186
pictures not complete ............... 187
pictures out of focus ................. 186
pictures too bright .................... 187
pictures too dark ...................... 187
playback will not execute .......... 184
red-eye ..................................... 188
shutter will not release ............. 183
viewfinder, monitor displays different .. 184
defined ....................................... 78
mark in control panel ................. 16
mark in viewfinder ...................... 17
spot metering area
mark in viewfinder ...................... 17
white balance mode button
location ....................................... 14
Windows 98 USB driver
provided with camera ................. 20
WRITE PROTECT
monitor message.............. 147, 149
SQ
compression ............................. 103
resolution .................................. 103
standard quality ........................ 103
storage capacity ......................... 34
TV screen
connecting to camera ............... 142
displaying images on ................ 142
storage capacity
table............................................ 34
Z
zoom
strap
U
using ........................................... 42
attaching to camera .................. 21
provided with camera ................. 20
USB cable
zoom ring
location ....................................... 14
using ........................................... 42
provided with camera ................. 20
200
|