| Nokia Bluetooth Headset BH-206   4 1 2 5 3 7 8 6 9255316/2   ENGLISH   The availability of particular products may   vary by region. Please check with the Nokia   dealer nearest to you.   Unauthorized changes or modifications to   this device may void the user's authority to   operate the equipment.   Export Controls   This device may contain commodities,   technology or software subject to export   laws and regulations from the US and other   countries. Diversion contrary to law is   prohibited.   Introduction   The Nokia Bluetooth Headset BH-206   allows you to make and receive calls   while on the move. You can use the   headset with compatible phones that   support Bluetooth wireless   Bluetooth wireless technology   Bluetooth wireless technology allows   you to connect compatible devices   without cables. A Bluetooth   connection does not require that the   phone and the headset be in line of   sight, but both devices should be   within 10 meters (30 feet) of each   other. Connections may be subject to   interference from obstructions, such   as walls, or other electronic devices.   technology.   Read this user guide carefully before   using the headset. Also read the user   guide for your phone, which provides   important safety and maintenance   information. Keep the headset out of   reach of small children.   The headset complies with the   Bluetooth Specification 2.0 + EDR   that supports the Headset Profile 1.1   and Hands-Free Profile 1.5. Check   ENGLISH   with the manufacturers of other   devices to determine their   compatibility with this device.   There may be restrictions on using   Bluetooth technology in some   locations. Check with your local   authorities or service provider.   Get started   The headset contains the following   parts shown on the title page: charger   connector (1), multifunction key and   blue indicator light (2), volume keys   (3), earloop (4), and microphone (5).   Chargers   Check the model number of any charger   before using it with this device. The   headset is intended for use with the   AC-3, AC-4, and DC-4 chargers.   Before using the headset, you must   charge the battery and pair the   headset with a compatible phone.   Parts of the headset are magnetic.   Metallic materials may be attracted to   the headset. Do not place credit cards or   other magnetic storage media near the   headset, because information stored on   them may be erased.   Warning: Use only chargers   approved by Nokia for use   with this particular   enhancement. The use of any other types   may invalidate any approval or warranty   and may be dangerous.   For availability of approved   enhancements, please check with your   dealer. When you disconnect the power   cord of any enhancement, grasp and pull   the plug, not the cord.   ENGLISH   talk-time or up to 140 hours of   Charge the battery   standby time. However, the talk and   standby times may vary when used   with different mobile phones or other   compatible Bluetooth devices, usage   settings, usage styles, and   The headset has an internal,   nonremovable, rechargeable battery.   Do not attempt to remove the battery   from the device, as you may damage   the device.   environments.   1. Connect the charger to a wall   outlet.   When battery power is low, the   indicator light flashes quickly.   2. Connect the charger cable to the   charger connector. The indicator   light is on while charging. It may   take a while before charging starts.   If charging does not start,   disconnect the charger, plug it in   again, and retry. Charging the   battery fully may take up to   2 hours 30 minutes.   Switch the headset on or off   To switch on, press and hold the   multifunction key until the indicator   light is displayed.   To switch off, press and hold the   multifunction key until the indicator   light briefly flashes several times and   turns off.   3. When the battery is fully charged,   the indicator light turns off.   Pair the headset   Disconnect the charger from the   headset and the wall outlet.   1. Ensure that your phone is switched   on and that the headset is   switched off.   The fully charged battery has power   for up to 7 hours and 30 minutes of   ENGLISH   2. Press and hold the multifunction   key (for about 8 seconds) until the   indicator light is continuously   displayed.   phone. In some phones you may   need to make the connection   separately after pairing. You only   need to pair the headset with your   phone once.   3. Activate the Bluetooth feature on   the phone, and set the phone to   search for Bluetooth devices.   If the pairing is successful, the   indicator light briefly flashes five   times, and the headset appears in the   phone menu where you can view the   currently paired Bluetooth devices.   4. Select the headset from the list of   found devices.   5. Enter the passcode 0000 to pair   and connect the headset to your   The headset is now ready for use.   Basic use   Wear the headset   Call handling   Slide the earloop behind your ear, and To make a call, use your phone in the   point the headset toward your mouth. normal way when the headset is   To use the headset on the left ear,   gently flip and rotate the earloop as   shown in Figures 6, 7, and 8.   connected to your phone.   If your phone supports last number   redialing with the headset, press and   hold the multifunction key (when no   ENGLISH   call is in progress) until you hear a   beep.   want to answer the call, press and   hold the multifunction key.   If your phone supports voice dialing   with the headset, briefly press the   multifunction key when no call in   progress, and proceed as described in   the user guide of your phone.   To adjust the earphone volume, press   either volume key.   To switch the call between the   headset and a compatible phone,   press and hold the multifunction key.   To answer or end a call, briefly press   the multifunction key. If you do not   Battery information   Your device is powered by a rechargeable left unused, a fully charged battery will   battery. The battery can be charged and   discharged hundreds of times, but it will   eventually wear out. Recharge your   battery only with Nokia approved   lose its charge over time.   Never use any charger that is damaged.   Leaving the device in hot or cold places,   such as in a closed car in summer or   winter conditions, will reduce the   capacity and lifetime of the battery.   Always try to keep the battery between   15°C and 25°C (59°F and 77°F). A device   with a hot or cold battery may not work   temporarily, even when the battery is   fully charged. Battery performance is   chargers designated for this device.   Unplug the charger from the electrical   plug and the device when not in use. Do   not leave a fully charged battery   connected to a charger, since   overcharging may shorten its lifetime. If   ENGLISH   particularly limited in temperatures well explode if damaged. Dispose of batteries   below freezing.   according to local regulations. Please   recycle when possible. Do not dispose as   household waste.   Do not dispose of batteries in a fire as   they may explode. Batteries may also   Care and maintenance   Your device is a product of superior   design and craftsmanship and should be   treated with care. The suggestions below   will help you protect your warranty   coverage.   and electronic components can be   damaged.   • • Do not store the device in hot areas.   High temperatures can shorten the   life of electronic devices, damage   batteries, and warp or melt certain   plastics.   • Keep all accessories and   enhancements out of the reach of   small children.   Do not store the device in cold areas.   When the device returns to its normal   temperature, moisture can form   inside the device and damage   electronic circuit boards.   • Keep the device dry. Precipitation,   humidity, and all types of liquids or   moisture can contain minerals that   will corrode electronic circuits. If your   device does get wet, allow it to dry   completely.   • • Do not attempt to open the device.   Do not drop, knock, or shake the   device. Rough handling can break   internal circuit boards and fine   mechanics.   • Do not use or store the device in   dusty, dirty areas. Its moving parts   ENGLISH   • • Do not use harsh chemicals, cleaning   solvents, or strong detergents to   clean the device.   Do not paint the device. Paint can   clog the moving parts and prevent   proper operation.   All of the above suggestions apply   equally to your device, battery, charger,   or any enhancement. If any device is not   working properly, take it to the nearest   authorized service facility for service.   |