HAND
BLENDER
INSTRUCTIONS
핸드
블렌더
사용 설명서
手持式
搅拌器
说明书
5KHB100
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including:
1. Read all instructions.
2. To protect against risk of electrical shock do not put motor body, cord or
electrical plug of this Hand Blender in water or other liquid.
3. This appliance should not be used by children and care should be taken when
used near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Center for examination, repair or
electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Do not let cord contact hot surface, including the stove.
11. When mixing liquids, especially hot liquids, use a tall container or make small
quantities at a time to reduce spillage.
12. Keep hands and utensils out of the container while blending to prevent the
possibility of severe injury to persons or damage to the unit. A scraper may be
used, but must be used only when the unit is not running.
13. Blades are sharp. Handle carefully.
14. This product is designed for household use only.
15. This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabillties, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
16. Children should be supervised to ensure that they do not play with the
appliance.
SAVE THESE INSTRUCTIONS
1
KitchenAid™ Hand Blender Warranty
Length of
Warranty:
KitchenAid
Will Pay For:
KitchenAid Will Not
Pay For:
One Year Full
Warranty from
date of purchase.
Replacement parts and
repair labor costs to
correct defects in
A. Repairs when Hand Blender is
used in other than normal single
family home use.
materials or
B. Damage resulting from accident,
alteration, misuse or abuse.
C. Any shipping or handling costs
to deliver your Hand Blender to
an Authorized Service Center.
workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Electrical Requirements
If a long extension cord is used:
The voltage and amperage rating for your
blender is located on the serial plate. The
maximum rating is based on the
attachment that draws the greatest load.
Other recommended attachments may
draw significantly less current.
• The marked electrical rating of the
extension cord should be at least
as great as the electrical rating of the
appliance.
• The cord should be arranged so it will
not drape over the countertop or
tabletop where it can be pulled by
children or tripped over unintentionally.
Extension cords are available and may
be used if special care is exercised in
their use.
Troubleshooting Problems
If your Hand Blender should
malfunction or fail to operate, please
check the following:
WARNING
1. Is the Hand Blender plugged in?
2. Is the fuse in the circuit to the Hand
Blender in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
3. Turn Hand Blender off for
10-15 seconds, then turn Hand Blender
back on.
Electrical Shock Hazard
Unplug before servicing.
Failure to do so can result in
electrical shock.
2
Hand Blender Features
Speed Control Dial
One-Touch Power Button
Motor Body
Powerful Motor
(not shown)
5-ft.
Power
Cord
Dual Ejector
Buttons
Blending
Beaker
and Lid
Blending
Attachment with
Stainless Steel Blade
Hand Blender Features
Speed Control Dial offers speeds
ranging from 9 (high) to 1 (low).
Blending Attachment with Stainless
Steel Blade simply snaps onto the motor
body. The sharp stainless steel blade is
covered to help prevent splashing while
blending.
One-Touch Power Button is located on
the front of the motor body and is
activated by pressing and holding during
blending. To stop blending, simply release
the power button.
Dual Ejector Buttons located on
opposite sides of the motor body, release
the attachment from the motor body
when pressed.
Motor Body is designed for a
comfortable, non-slip grip.
5-ft. Power Cord is long enough to take
the Hand Blender to the cooktop or work
area and is rounded with no grooves for
easy clean up.
Powerful Motor (not shown)
provides powerful blending action and is
designed for quiet, long-life operation.
Blending Beaker and Lid are handy for
individual blending jobs. Lid seals the top
of the beaker to store blended ingredients.
3
Assembling Your Hand Blender
1. Before using the KitchenAid™ Hand
2. Remove the attachment by pressing
both ejector buttons on either side of
the body.
Blender for the first time, wipe the
motor body with a clean, damp cloth to
remove any dirt or dust. Mild dish soap
may be used, but do not use abrasive
cleansers.
NOTE: Do not immerse the motor body in
water.
Dry with a soft cloth. Wash the
attachment by hand or in the dishwasher.
Dry thoroughly.
NOTE: Always be sure to unplug the
power cord from the wall socket before
attaching or removing attachment.
3. Read Operating Tips (page 5).
Operating Your Hand Blender
Using the Blending Attachment
NOTE: Hand Blender should only be
immersed in liquids the length of the
attachment. Do not submerge beyond
the seam of the blending attachment.
Do not immerse the motor body into
liquids or other mixtures.
1. Insert the blending attachment into the
motor body.
5. Press the power button to activate the
Hand Blender.
6. When blending is complete, release
the power button before removing
Hand Blender from the mixture.
7. Unplug immediately after use, before
removing attachment.
2. Plug the electrical cord into an
electrical wall socket.
3. Adjust the speed by turning the speed
control dial on top of the Hand
Blender.
4. Insert the Hand Blender into the
mixture.
4
Operating Tips
• Cut solid foods into small pieces for
easier blending.
• Be sure the extra long cord of the Hand
Blender is not extending over a hot
heating element.
• To avoid splashing, insert the Hand
Blender into the mixture before pressing
the power button, and release the
power button before pulling the Hand
Blender out of the mixture.
• When blending in a saucepan on a
cooktop, remove the pan from the
heating element to protect the Hand
Blender from overheating.
• For best blending, hold the Hand
Blender at an angle and gently move
up and down within the container. Do
not pound down on the mixture with
the Hand Blender.
• Do not let the Hand Blender sit in a hot
pan on the cooktop while not in use.
• Remove hard items, such as fruit pits or
bones, from the mixture before blending
to help prevent damage to the blades.
• Do not use your Hand Blender to
process coffee beans or hard spices such
as nutmeg. Processing these foods could
damage the blades of the Hand Blender.
• Do not use the beaker in the microwave
oven.
• To prevent overflow, allow room in the
container for the mixture to rise when
using the Hand Blender.
Care and Cleaning
1. Unplug Hand Blender before
cleaning.
NOTE: Do not immerse the motor body
in water.
2. Remove the attachment by pressing
both ejector buttons on either side of
the motor body.
3. Wipe the motor body with a damp
cloth. Mild dish soap may be used,
but do not use abrasive cleansers.
4. Wipe power cord with warm, sudsy
cloth; then wipe clean with damp
cloth. Dry with soft cloth.
Proof of Purchase & Product Registration
Always keep a copy of the sales
receipt showing the date of purchase
of your Hand Blender. Proof of
purchase will assure you of
This card will enable us to contact you
in the unlikely event of a product safety
notification and assist us in complying
with the provisions of the pertinent
local laws and regulations. This card
does not verify your warranty.
in-warranty service.
Before you use your Hand Blender,
please fill out and mail your product
registration card packed with the unit.
Please complete the following for
your personal records:
Model Number______________________________________________________________
Serial Number_______________________________________________________________
Date Purchased______________________________________________________________
Store Name _________________________________________________________________
5
|