Color Laser Printer
CLP-300 Series
CLP-300/XSG
:
Basic Model CLP-300
Manual
SERVICE
Samsung Color Laser Printer
The keynote of Product
[The keynote of Product]
[Series Model]
.CLP-300: B/W 16 ppm, Color 4 ppm, SPL-C
.CLP-300N: CLP-300 + Network
[Resolution]
. 2400 x 600 dpi
[CPU]
.Samsung CorrusM 170MHz
[Interface]
.CLP-300 : USB 2.0
.CLP-300N : USB 2.0, Ethernet 10/100 Base TX
[Consumables]
.2K black toner cartridge
.1K color toner cartridge
.Waste toner box
[Paper Handling]
.150 sheets Semi-cassette
.1 sheet manual slot
.150 sheet Face-Down
CLP-300
Contents
1. Precautions
1.1 Safety Warning
1-1
1-2
1-5
1-5
1.2 Caution for safety
1.3 ESD Precautions
1.4 Super Capacitor or Lithium Battery Precautions
2. Product Specification
2.1 Product Overview
2.2 Specifications
2-1
2-2
2-7
2.3 Model Comparison Table
3. System Overview
3.1 System Structure
3.2 Main PBA Description
3.3 CRUM
3-1
3-7
3-17
3-19
3.4 General Description
4. S/W Structure and Descriptions
4.1 Architecture
4-1
4-1
4-1
4-2
4-2
4-3
4-4
4-4
4.2 Language Monitor
4.3 Status Monitor
4.4 Network Interface
4.5 Printer Driver <-> Status Monitor
4.6 System F/W Flow
4.7 Alarm Shortage
4.8 Error status
Continued
4.9 CRUM Overview
4-5
4-5
4-6
4.10 FW Upgrade
4.11 Initailize Flow
5. Disassembly and Reassembly
5.1 Precautions When Replacing Parts
5.2 Parts for Maintenance and Repair
5.3 Information Related in Disassembly and Assembly
5.4 Disassembly Procedure
5-2
5-3
5-5
5-10
6. Alignment and Adjustments
6.1 Control Panel
6-1
6-2
6.2 Function
6.3 Jam Removal
6-6
6.4 Sample Pattern
6-9
6.5 Periodic Defective Image
6.6 How to use EDC (Engine Diagnostic Control) Mode
6.7 Error Message
6-10
6-11
6-17
7. Troubleshooting
7.1 Procedure of Checking the Symptoms
7.2 Troubleshooting Checklist
7-1
7-2
7.3 Solving General Printing Problems
7.4 Solving Print Quality Problems
7.5 Common Windows Problems
7.6 Common Macintosh Problems
7.7 Common Linux Problems
7-3
7-7
7-11
7-11
7-12
7-15
7.8 Major Problems Trouble shooting
Continued
8. Exploded Views & Parts List
8.1 Main
8-2
8-3
8.2 Top Cover
8.3 Rear Cover
8.4 Front Cover
8.5 Main Driver
8.6 Main Frame
8.7 LSU Cover
8.8 Fuser Unit
8.9 ELA-UNIT OPC DEV
8.10 ITB Unit
8-4
8-5
8-6
8-8
8-10
8-11
8-12
8-13
8-14
8.11 Casstte Unit
9. Block diagram
9.1 Block Diagram
9-1
10. Connection Diagram
10.1 Connection Diagram
10-1
11. Schematic Diagram
11.1 Main Board
11.2 Panel
11-1
11-16
11-17
11-18
11-19
11-20
11-21
11.3 DEVE INF
11.4 ITB INF
11.5 SMPS-110V
11.6 SMPS-220V
11.7 HVPS
Continued
12. Reference Information
12.1 Tools for Troubleshooting
12-1
12-2
12-4
12-5
12.2 Acronyms and Abbreviations
12.3 Select a location for the printer
12.4 A4 ISO 19752 Standard Pattern
Precautions
1. Precautions
In order to prevent accidents and to prevent damage to the equipment please read the precautions listed
below carefully before servicing the printer and follow them closely.
1
1.1 Safety Warning
(1) Only to be serviced by appropriately qualified service engineers.
High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably
trained and qualified service engineer.
(2) Use only Samsung replacement parts
There are no user serviceable parts inside the printer. Do not make any unauthorized changes or
additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards.
(3) Laser Safety Statement
The Printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for
Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product
conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The
laser system and printer are designed so there is never any human access to laser radiation above a Class I
level during normal operation, user maintenance, or prescribed service condition.
Warning >> Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The
reflected beam, although invisible, can damage your eyes. When using this product, these basic safety
pre-cautions should always be followed to reduce risk of fire, electric shock, and injury to persons.
CAUTION - INVISIBLE LASER RADIATION
WHEN THIS COVER OPEN.
DO NOT OPEN THIS COVER.
VORSICHT - UNSICHTBARE LASERSTRAHLUNG,
WENN ABDECKUNG GE FFNET.
NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS
D OUVERTURE. EXPOSITION DANGEREUSE
AU FAISCEAU.
ATTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI
APERTURA. EVITARE L ESPOSIZIONE AL
FASCIO.
PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE.
EVITAR EXPONERSE AL RAYO.
ADVARSEL. - USYNLIG LASERSTR LNING VED BNING, N R
SIKKERHEDSBRYDERE ER UDE AF FUNKTION.
UNDG UDSAETTELSE FOR STR LNING.
ADVARSEL. - USYNLIG LASERSTR LNING N R DEKSEL
PNES. STIRR IKKE INN I STR LEN.
UNNG EKSPONERING FOR STR LEN.
VARNING - OSYNLIG LASERSTR LNING N R DENNA DEL
R PPNAD OCH SP RREN R URKOPPLAD.
BETRAKTA EJ STR LEN. STR LEN R FARLIG.
VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTIINA N KYM TT M LLE LASER-
S TEILYLLE L KATSO S TEESEEN.
Service Manual
1-1
Samsung Electronics
Precautions
1.2 Caution for safety
1.2.1 Toxic material
This product contains toxic materials that could cause illness if ingested.
(1) If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is toxic. Contact with the skin
should be avoided, wash any splashes from eyes or skin immediately and contact your doctor. If the liquid gets into
the mouth or is swallowed see a doctor immediately.
(2) Please keep toner cartridges away from children. The toner powder contained in the toner cartridge may be harmful
and if swallowed you should contact a doctor.
1.2.2 Electric Shock and Fire Safety Precautions
Failure to follow the following instructions could cause electric shock or potentially cause a fire.
(1) Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric
shock.
(2) Use only the power cable supplied with the printer. Use of an incorrectly specified cable could cause the cable
to overheat and potentially cause a fire.
(3) Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to
a fire.
(4) Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow paper
clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to an electric
shock or fire hazard..
(5) Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When
servicing the printer remove the power plug from the wall socket.
(6) Use caution when inserting or removing the power connector. The power connector must be inserted com-
pletely otherwise a poor contact could cause overheating possibly leading to a fire. When removing the power
connector grip it firmly and pull.
(7) Take care of the power cable. Do not allow it to become twisted, bent sharply round corners or otherwise
damaged. Do not place objects on top of the power cable. If the power cable is damaged it could overheat and
cause a fire or exposed cables could cause an electric shock. Replace a damaged power cable immediately,
do not reuse or repair the damaged cable. Some chemicals can attack the coating on the power cable,
weakening the cover or exposing cables causing fire and shock risks.
(8) Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should be
repaired immediately. Take care not to cut or damage the power cable or plugs when moving the machine.
(9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from
the power source when such weather conditions are expected. Do not touch the machine or the power cord if it
is still connected to the wall socket in these weather conditions.
(10) Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the machine
near a humidifier. Damp and dust build up inside the machine can lead to overheating and cause a fire.
(11) Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise possibly
leading to the printer failing to work properly and in extreme conditions could lead to a fire.
(12) Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it could
make contact with a high voltage conductor inside the machine and cause an electric shock.
Service Manual
1-2
Samsung Electronics
Precautions
1.2.3 Handling Precautions
The following instructions are for your own personal safety, to avoid injury and so as not to damage the printer
(1) Ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause
the printer to tip or fall.
(2) The printer contains many rollers, gears and fans. Take great care to ensure that you do not catch your fingers,
hair or clothing in any of these rotating devices.
(3) Do not place any small metal objects, containers of water, chemicals or other liquids close to the printer which if
spilled could get into the machine and cause damage or a shock or fire hazard.
(4) Do not install the machine in areas with high dust or moisture levels, beside on open window or close to a
humidifier or heater. Damage could be caused to the printer in such areas.
(5) Do not place candles, burning cigarettes, etc. on the printer, these could cause a fire.
1.2.4 Assembly / Disassembly Precautions
Replace parts carefully, always use Samsung parts. Take care to note the exact location of parts and also
cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly.
Please carry out the following procedures before dismantling the printer or replacing any parts.
(1) Check the contents of the machine memory and make a note of any user settings. These will be erased if the
mainboard is replaced.
(2) Ensure that power is disconnected before servicing or replacing any electrical parts.
(3) Disconnect printer interface cables and power cables.
(4) Only use approved spare parts. Ensure that part number, product name, any voltage, current or temperature
rating are correct.
(5) When removing or re-fitting any parts do not use excessive force, especially when fitting screws into plastic.
(6) Take care not to drop any small parts into the machine.
(7) Handling of the OPC Drum
- The OPC Drum can be irreparably damaged if it exposed to light.
Take care not to expose the OPC Drum either to direct sunlight or to fluorescent or incandescent room
lighting. Exposure for as little as 5 mins can damage the surface’s photoconductive properties and will result
in print quality degradation. Take extra care when servicing the printer. Remove the OPC Drum and store it in
a black bag or other lightproof container. Take care when working with the covers(especially the top cover)
open as light is admitted to the OPC area and can damage the OPC Drum.
- Take care not to scratch the green surface of OPC Drum Unit.
If the green surface of the Drum Cartridge is scratched or touched the print quality will be compromised.
Service Manual
1-3
Samsung Electronics
Precautions
1.2.5 Disregarding this warning may cause bodily injury
(1) Be careful with the high temperature part.
The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to cool
down before disassembly.
(2) Do not put finger or hair into the rotating parts.
When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, fan,
etc.). If do, you can get harm.
(3) When you move the printer.
This printer weighs 13.6kg including Consumables. Use safe lifting and handling techniques. Back injury could
be caused if you do not lift carefully.
(4) Ensure the printer is installed safely.
The printer weighs 13.6Kg, ensure the printer is installed on a level surface, capable of supporting its weight.
Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging the printer.
(5) Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is stable.
Service Manual
1-4
Samsung Electronics
Precautions
1.3 ESD Precautions
Certain semiconductor devices can be easily damaged by static electricity. Such components are commonly called
“Electrostatically Sensitive (ES) Devices”, or ESDs. Examples of typical ESDs are: integrated circuits, some field
effect transistors, and semiconductor “chip” components.
The techniques outlined below should be followed to help reduce the incidence of component damage caused by
static electricity.
Caution >>Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
1. Immediately before handling a semiconductor component or semiconductor-equipped assembly, drain off any
electrostatic charge on your body by touching a known earth ground. Alternatively, employ a commercially avail-
able wrist strap device, which should be removed for your personal safety reasons prior to applying power to the
unit under test.
2. After removing an electrical assembly equipped with ESDs, place the assembly on a conductive surface, such as
aluminum or copper foil, or conductive foam, to prevent electrostatic charge buildup in the vicinity of the assem-
bly.
3. Use only a grounded tip soldering iron to solder or desolder ESDs.
4. Use only an “anti-static” solder removal device. Some solder removal devices not classified as “anti-static” can
generate electrical charges sufficient to damage ESDs.
5. Do not use Freon-propelled chemicals. When sprayed, these can generate electrical charges sufficient to dam-
age ESDs.
6. Do not remove a replacement ESD from its protective packaging until immediately before installing it. Most
replacement ESDs are packaged with all leads shorted together by conductive foam, aluminum foil, or a compa-
rable conductive material.
7. Immediately before removing the protective shorting material from the leads of a replacement ESD, touch the pro-
tective material to the chassis or circuit assembly into which the device will be installed.
8. Maintain continuous electrical contact between the ESD and the assembly into which it will be installed, until com-
pletely plugged or soldered into the circuit.
9. Minimize bodily motions when handling unpackaged replacement ESDs. Normal motions, such as the brushing
together of clothing fabric and lifting one’s foot from a carpeted floor, can generate static electricity sufficient to
damage an ESD.
1.4 Super Capacitor or Lithium Battery Precautions
1. Exercise caution when replacing a super capacitor or Lithium battery. There could be a danger of explosion and
subsequent operator injury and/or equipment damage if incorrectly installed.
2. Be sure to replace the battery with the same or equivalent type recommended by the manufacturer.
3. Super capacitor or Lithium batteries contain toxic substances and should not be opened, crushed, or burned for
disposal.
4. Dispose of used batteries according to the manufacture’s instructions.
Service Manual
1-5
Samsung Electronics
Product Specifications
2. Product Specifications
2.1 Product Overview
2
Item(s)
Pages Printed
Part number
Remark
User
Black toner
cartridge
Approx. Initial : 1,500 pages*
CLP-K300A
Sales : 2,000 pages*
Replacement
Color toner
cartridge
Approx. Initial : 700 pages*
CLP-C300A : Cyan
CLP-M300A : Magenta
CLP-Y300A : Yellow
Sales : 1,000 pages*
Imaging unit
Approx. 20,000 black
pages or approx.
CLP-R300A
12,500 color pages
Waste toner
container
Approx. 5,000 images**
or Approx. 1,250 pages
(fulll color Standard image)
CLP-W300A
Pick-up roller
Fuser unit
Approx. 50,000 pages
Contact a service
representative
Engineer
Approx. 100,000 black pages
or 50,000 color pages
Replacement
T2 roller
ITB
Approx. 100,000 pages
Approx. 60,000 black pages
or 15,000 color pages
* Average A4-/letter-sized page count based on Standard coverage of individual colors on each page.
Usage conditions and print patterns may cause results to vary.
** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta,
Yellow, Black), the life of this item will be reduced by 25%.
Service Manual
2-1
Samsung Electronics
Product Specifications
2.2 Specifications
Specifications are correct at the time of printing. Product specifications are subject to change without notice.
See below for product specifications.
2.2.1 General Specifications
Service Manual
2-2
Samsung Electronics
Product Specifications
2.2.2 Controller & S/W
∫∞
Service Manual
2-3
Samsung Electronics
Product Specifications
2.2.3 Paper Handling
Service Manual
2-4
Samsung Electronics
Product Specifications
2.2.4 Consumables
CRU
No. of CRUs
6 (C/M/Y/K toner, Imaging Unit, Waste toner container)
K toner cartridge: CLP-K300A
C toner cartridge: CLP-C300A
M toner cartridge: CLP-M300A
Y toner cartridge: CLP-Y300A
Imaging unit : CLP-R300A
Waste toner container: CLP-W300A
Toner
Black
: Initial : 1,500 (Sales : 2,000) A4/Letter pages,
at ISO 19752 Standard Coverage,Semi glossy
Color
Initial : 700 (Sales : 1,000) A4/Letter pages,
at ISO 19752 Standard Coverage Semi glossy
KeyUnique,
Life detect
Electronic
(CRUM)
key
Sensor (Y)Remain % (90% : warning,100%: empty,
120% : hardstop)
Imaging Kit(OPC+Deve)
Waste Toner Container
Yield
Approx. 20K black pages (or 12.5K color pages)
KeyUnique,
Sensor
Electronic
(CRUM)
key
None, that would be traced via software
Replace method
Yield
6 steps for install/replacing
1,250 sheets (Full Color Std. Image) or 5,000 images, Full Sensor
KeyN/A
FRU
No. of FRUs
ITB
4 (ITB, Fuser, T2 roller, Pick-up roller)
Yield
Approx. 60K black pages (or 15K color pages)
KeyNone
Sensor
Yield
None
Fuser
100,000 sheets B&W or 50,000 sheets Color
KeyNone
Yield
T2 Roller
Pick-up Roller
100,000 sheets, Replacable
KeyNone
Yield
50,000 sheets, Replacable
KeyNone
Service Manual
2-5
Samsung Electronics
Product Specifications
2.2.5 Environment
2.2.6 Options
2.2.7 Accessory
INA-ACCESSORY
JC99-02015A
-
CBF-POWER CORD
3903-000042
6902-000288
JC46-00257A
BAG PE
S/W APPLICATION-CD
S/W APPLICATION-CD
JC46-00313A
JC68-00690A
JC68-01584A
MANUAL-(CARD)WARRANTY CARD
LABEL(P)-BLANK 90*25
Service Manual
2-6
Samsung Electronics
Product Specifications
2.3 Model Comparison Table
Service Manual
2-7
Samsung Electronics
System Overview
3. System Overview
This chapter describes the functions and operating principles of the main components.
3
3.1 System Structure
3.1.1 Main Parts of System
Service Manual
3-1
Samsung Electronics
System Overview
Cassette
Feeding Method : Cassette Type
Feeding Standard : Center Loading
Feeding Capacity : Cassette 150 Sheets(75g/ , 20lb Paper Standard)
No Manual Feeder
Paper Detecting Sensor : Photo Sensor (Empty, Registration, Exit)
Paper Size Sensor : None
LSU(Laser Scan Unit)
Consisted of LD(Laser Diode) and Polygon Motor Control.
Error
Phenomenon
Polygon Motor Error
Hsync Error
The Rotation of Polygon Motor can not reach stable
Though the rotation of Polygon Motor reach stable, the sig-
nal of Hsync is not occurred
2nd Transfer Ass y
The life span: Print over 100,000 sheets (in 15~30
Specification: Similar to CLP-500 Series
)
Fuser Ass y
Heat Lamp : New Part - Knuckle Type
Heat Roller : Similar to CLP-500 Series
2 Pressure Roller : One is similar to HummingBird, the Other is a new added part comparing with
other Fuser
Thermistor - Temperature-Measuring Device
Thermostat - Critical Temperature-Detecting Device
&
&
ITB(Intermediate Transfer Belt) & 1st Transfer Roller
The life span: Print over 100,000 Images
The ITB unit includes 1st Transfer Roller
OPC(Organic Photo-Conductor) & Developer
The life span: Print over 44,000 Images (Both)
Imagine Unit consists of 4 kinds of Developer , OPC, and Deve. Main Frame
Toner Kits
The life span: Color -> Initial 700 / Sales 1,000 images (ISO 19752 Standard Coverage Print-Out)
Black -> Initial 1,000 / Sales 2,000images (ISO 19752 Standard Coverage Print-Out)
Driver Ass y
It is a power delivery unit by gearing
By driving the motor, it supplies the power to the feeding unit, the fusing unit, and the distributing unit.
The Main Motor is similar to CLP-500 Series Main Motor.
Service Manual
3-2
Samsung Electronics
System Overview
3.1.2 EP Process
- Structure of EP Process
P1: Image
on OPC
Blade
ITB Unit
P2: Image
on Media
Media Path
OPC
Blade
Eraser
Charger
~
Developer
Laser Scanning Unit
Service Manual
3-3
Samsung Electronics
System Overview
- System Outline
Paper path
Exit
Fuser
Toner
Cartridge
Dev-Y
Dev-M
Dev-C
OPC
ITB
Dev-K
LSU
Cassette
Charging
Conductive Roller charging
Roller resistivity : ~ 10^5 ohm-cm
Applied voltage : -1.1kV
Charge acceptance : -520V
OPC coating thickness : 21um
OPC diameter : 60mm
Non eraser system
1. Organic Photoconductor is charged to uniform voltage by conductive roll charging method
2. No ozone is produced because corona is not used
3. Charger roll is cleaned with cleaning roll
4. Toner remained on OPC after T1 process is cleaned by cleaning blade and retrieved into waste toner
box by auger and belt driving mechanism
Service Manual
3-4
Samsung Electronics
System Overview
Exposing
One polygon motor ( 6 facet )
Single beam LD (1ea)
LD wavelength : 785nm
Polygon motor rpm : 23747.5
LSU energy : 0.25uJ/cm^2
OPC exposed potential : -50V
1. Exposing is implemented by laser striking on to OPC with uniform potential
2. Laser beam is modulated according to image to be printed that is from PC
3. Latent Image is formed on OPC, which is developed with toner
Developing
Non-magnetic, mono component
Non-contact development
Developing bias : DC + AC
AC peak to peak : 1.5 ~ 2.0kV
Mass on developing roller : 550 ~ 600ug/cm^2
Toner coulomb : 15 ~ 20uC/g
Roller diameter : 10mm
Roller resistivity : 10^5 ~ 10^6 ohm-cm
Process speed ratio : 1.2 (OPC=1.0)
Color order : Y -> M -> C -> K
1. Only latent image formed by exposing process is developed with toner
2. AC + DC Voltage is being used to develop toner into latent image on OPC because non-contact
developing method is adopted
3. Y, M, C, and K Images are sequentially developed onto OPC and transferred onto Intermediate
Transfer Belt (hereafter ITB) to form a color image on ITB
4. Toner Bottles are used to supply toner into developer compartment
5. Toner level is being sensed to control toner supply from toner bottle to developer
Transfer 1
Multi-pass transfer
Indirect transfer
Transfer voltage : 0.5 ~ 2.0kV (controllable)
Roller diameter : 14mm
Roller resistivity : ~ 10^7 ohm-cm
Belt resistivity : 10^9 ~ 10^11 ohm-cm
Environment sensing by Y-transfer roller
Transfer unit life : 50K images
1. Developed Image on OPC is transferred onto ITB by T1 Process
2. T1 Voltage is positive which attract toner to ITB
3. 4 times of T1 process is required to make a color image on ITB, which means multi-pass process
4. ITB has a hole as a fiducial mark for timing. Engine control for color image is synchronous with it,
ITB Home Sensing Signal
Service Manual
3-5
Samsung Electronics
System Overview
Transfer 2
Indirect transfer
Transfer voltage : 1 ~ 4.0kV (controllable)
Roller diameter : 18.6mm
Roller resistivity : ~ 10^7 ohm-cm
Belt resistivity : 10^9 ~ 10^11 ohm-cm
Transfer unit life : 50 K images
1. Color image formed on ITB is transferred onto media by T2 process
2. T2 voltage is also positive to get color image moved onto media
3. Toner remained on ITB after T2 process is cleaning by ITB cleaning blade and collected and
4. Transported and retrieved into waste toner box by auger and belt driving system
5. T2 Roll is engaged when color image is being transferred onto media. Otherwise it is disengaged. Clutch is used
for driving T2 Roll engagement and disengagement
Fusing
3 Roll system
-> short warm-up time (45sec)
Post Pressure Roll
1. Color Image on media is melted down and fixed into media by fusing process
Service Manual
3-6
Samsung Electronics
System Overview
3.2 Main PBA Description
3.2.1 Main Controller PBA
Service Manual
3-7
Samsung Electronics
System Overview
3.2.2 Main PBA
RJ45
USB
Connector
Service Manual
3-8
Samsung Electronics
System Overview
3.2.3 Main PBA Description
1) CHORUSm
CHORUSm involves in itself the functions to control ARM Processor Core and various H/W devices. CHORUSm,
therefore, controls Main PBA and all engine mechanism, processing the print job received from host and enabling the
engine to print image.
Function
Process
0.13um Technology
Package
496 PBGA
CPU Core
ARM 920T - 300MHz
Cache : I-Cache 16KB, D-Cache 16KB
System Bus
32-bit width, 100MHz
SDRAM Controller
32-bit width, 100MHz operation
5 Banks, Up to 128MB Address space per Bank
Programmable Timing to Control SDRAM A.C Characteristics
Support Self Refresh for Data Retention
ROM Controller
32-bit width, 4 Banks, Up to 16MB Address space per Bank
Burst Capability
Programmable Timing per Bank
Service Manual
3-9
Samsung Electronics
System Overview
IO Controller
6 Channels, Up to 16MB Address space per Bank
Programmable Timing per Bank
DMA Controller
6 Channels General Purpose DMA
HPVC Controller
Hyper Printer Video Controller
High Performance DMA-based Interface to Printer Engine
Support Dual/Single Beam LSU, LVDS Video Output
Support A3, 1200dpi
UART Controller
5 Channels Indepenent Full Duplex UART
Interrupt Controller
Support 6 External Interrupts
Support 26 Internal Interrupts
Timer Controller
6 System Timers and Watch Dog Timer for S/W Trap
Scanner Controller
300/400/600/1200dpi CIS/CCD Interface
Color/Mono grey image, Binary image scan support
600dpi Color/Mono Copy support
Image Processing for High-End MFP,Digital Copier
MH/MR/MMR CODEC for Fax
Scan image : A4 1200dpi processing
Copy image : A4 600dpi processing
MAC Controller
10/100Mbps
Full IEEE 802.3 compatibility
PPI Controller
IEEE1284 compliant parallel port interface
DMA-Based or Interrupt-Based operation
GEU Controller
Graphic Engine Unit for Banding support of Printer Language
Scan Line Buffer, Polygon Filling
CODEC Controller
2 Channels JBIG Encoding and Decoding
I2C Controller
1 Channel, Operated at max frequency 400kHz
RTC Controller
Engine Controller
LSU Control and Interface Unit
2 Channels STEP Motor Control Unit
8 Channels PWM Control Unit
8 Channels ADC Control Unit
2 Channels DAC Control Unit
Service Manual
3-10
Samsung Electronics
System Overview
CHORUSm (Internal Block Diagram)
Service Manual
3-11
Samsung Electronics
System Overview
2) System Memory Block
Memory saves program and video data and print jobs received from host. Its volume is 64MB with network function
and 32MB without network function. It has no separate device for extension. SDRAM is used, driven at width of 32-bit
and 100MHz, and controlled by memory controller built in CHORUSm.
3) Flash Memory Block
Flash memory is the space used for saving program. Its volume is 4MB with network function and 2MB without net-
work function. It has no separate device for extension. NOR type flash memory is used and accessed at 32-bit width
burst, being controlled by the ROM controller built in CHORUSm.
4) USB2.0 Device Block
This block supports USB2.0 high speed (480Mbps). ISP1582 of Philips company is used and connected to the IO
Bus of CHORUSm at 16-bit, controlled by IO controller built in CHORUSm. Through this I/O port it receives print job
from host.
5) Network Block
This block has 10/100Mbps wired network function and is controlled by MAC controller built in CHORUSm. It is con-
nected to host through physical layer chip outside, and thus receives print job from host. STE100P is used for physi-
cal layer chip.
6) EEPROM Block
System EEPROM is controlled by the I2C controller built in CHORUSm, connected to the other non-volatile memory
on I2C bus. It works at the speed of 400KHz. This system EEPROM contains all drive information and production
information necessary for the operation of printer. Its size is 16k-bit.
7) OPE Control
The panel is driven in the form of PIO by GPIO controller built in CHORUSm. OPE consists of one key and four
monochrome LED, and one dual LED.
8) LSU Control
Laser Scanning Unit is controlled by LSU controller built in CHORUSm. It makes use of all functions such as Polygon
Mirror Motor Control necessary for driving LSU and Synchronized Signal Generation Control, and helps to scan laser
beam on the photosensitive drum to form latent image.
9) BLDC Control
It is controlled by BLDC controller built in CHORUSm. It controls the drive of printer mechanism and helps it to be dri-
ven at an equal speed.
10) Sensors Control
GPIO controller built in CHORUSm collects the status of all sensors. According to this status of sensors, it controls
printer mechanism to help normal printing. There are sensors such as Paper Empty Sensor, Registration Sensor and
Developer Home Sensor, etc.
Service Manual
3-12
Samsung Electronics
System Overview
11) Clutches Control
GPIO Controller built in CHORUSm controls all clutches, which help printer to do print job normally. There are clutch-
es such as Paper Pick-up Clutch, Registration Clutch, Developer Home Clutch, ITB Clutch, T2 Clutch, Fuser Clutch,
Developer Toner Supply Clutch, etc.
12) PWM Control
PWM Controller built in CHORUSm controls the parts that require PWM for normal printing, such as BLDC drive
speed and HVPS high voltage level, etc.
13) ADC Control
It is controlled by ADC Controller built in CHORUSm, and is used for perception of charged voltage and current, 1st
and 2nd transfer voltage and current, fusing temperature, used-up toner and toner amount, and interior temperature,
etc.
14) DAC Control
It is controlled by DAC Controller built in CHORUSm and used to set standard level of light amount of LSU Laser
Diode.
Service Manual
3-13
Samsung Electronics
System Overview
3.2.4 SMPS(Switching Mode Power Supply) PBA
SMPS is consisted of SMPS part which supplies DC power for driving system and AC Heat Control part which supplies
power to Fuser. Standard TYPE III is used.
1) DC Output
Main Controller PBA, OP Panel, BLDC, Sensors, Clutches, Other PBAs
2) AC Output
Fuser Unit(Heat Lamp, Thermostat)
3) Output Voltage
CHANNEL
V_out
+5.0V
+24V
+24VF
+5.0V +/-5%
+24.0V +15%/-10%
LSU
+24.0V +15%/-10%
Load
MicroController,
CMOS, LOGIC
MOTOR, CLUTCH,
HVPS
CON3 To Main PBA
CON1 AC Input
Service Manual
3-14
Samsung Electronics
System Overview
3.2.5 HVPS(High Voltage Power Supply) PBA
HVPS PBA generates high voltage of charger, supply, T1 and T2 which is supplied to Developer, ensuring optimum con-
dition for image formation. HVPS receives input of 24V and generates high voltage, supplying it to Toner, OPC,
Cartridge, ITB Unit and Transfer Roller.
Service Manual
3-15
Samsung Electronics
System Overview
1) Charger Voltage : Charger
Function: voltage that charges OPC surface up to ?500V~ -800V.
Output voltage: -1.0KV ~ -2.0KV DC 3%
Error type: if the voltage fails to be output to Charger Roll, OPC surface will not be charged, and the toner on the
developer roller will be transferred to OPC Drum, printing black paper.
2) 1st Transfer High Voltage : T1(+)
Function: voltage necessary for transferring toner developed on OPC Drum surface onto ITB.
Output voltage: Max +2.0KV
3%(Duty variable, no load)
ERROR type: if T1(+) output fails, the toner on OPC drum will not be transferred to ITB normally and the image will
be blurred.
3) 2nd Transfer High Voltage : T2(+)
Function: voltage used to transfer the toner primarily transferred on ITB again onto paper.
Output voltage: Max +5.0KV
3%(Duty variable, no load)
ERROR type: if T2(+) output fails, the toner on ITB will not be transferred to paper normally and the image will be
blurred.
4) T2 Cleaning Voltage : Clean : T2(-)
Function: prevent reverse side of paper from being dirtied, by recovering the negatively charged toner remaining at
Transfer Roller and sending it onto ITB.
Output voltage: with no feedback control, output fixed voltage(-1300V +/- 15%)
ERROR type: reverse side of paper will be dirtied.
5) Supplying Voltage : Supply AC+DC(-)
Function: voltage that makes toner to develop on the area exposed by LSU by means of potential difference, output
will be the voltage of AC+DC overlapped form.
Output voltage: AC 600V ~ 2000V p-p +/-1.5%
DC -50V ~ -600V DC +/- 3%
ERROR type: 1. if supply is GND, density will be extremely low.
2. if supply is floating (for insecure terminal contact), density will be down so slightly that it is impossible
to make out with naked eyes.
6) Developing Voltage : Deve AC+DC(-)
Function: voltage that supplies toner to Developing Roller
Output voltage: AC 300V ~ 1700Vp-p 1.5% (supply voltage is connected to ZENER Diode 300V)
DC -50V ~ -600V DC +/- 3%
ERROR type: 1. if Deve is GND, density will be extremely down.
2. if Deve is floating (for insecure terminal contact), density will be extremely down.
Service Manual
3-16
Samsung Electronics
System Overview
3.3 CRUM
In the case of Refill Toner Install
1) Perception of Refill Cartridge (when power is on or the cover is closed)
End of Life / life span data initialization -> judge to be Refill Cartridge
End of Life / life exhausted (simple refill) -> stop printing caused by life exhaustion
2) Operating
It is impossible to control appropriate development parameters, for there s no toner specification data.
It runs with the setting of default development parameter. (Image quality will be degraded, for the lack of appropriate
respond to the change of time and environment.)
3) Service Response
It is possible to response appropriately, for the information of cartridge life is saved at Back Up Area.
Process after CRU life expiration
1) Record the information of End of Life.
2) Copy the information of Operating Area into Back up Area.
3) Write-Protect Back up Area.
4) Clear some information of Operation Area.
-> Supplier/Model Name/MFC date/Serial Number (Manufacture Information)
-> Let cartridge refiller initialize manufacture information and life span information.
Service Manual
3-17
Samsung Electronics
System Overview
CRUM Position
Cap
Agitator
Washer
Bottle
Cap- CRUM
Agitator
Seal
CRUM
Coupling
Service Manual
3-18
Samsung Electronics
System Overview
3.4 General Description
This chapter is the product specification for the CLP-300 Series. The CLP-300 Series is a Color Laser Printer. The CLP-
300 Series series can be expanded to multi functional printer (MFP). CLP-300 Series is developed for two target users.
Those are small office users who sometimes need color printouts, and medium business users who mainly use B/W
printouts. The main product concept is “the world smallest and lightest color laser printer”. This model has 16ppm B/W
print-speed and 4ppm color print-speed, 2400 x 600 dpi class (optical 600 x 600 dpi) color laser printer.
3.4.1 Controller
-The video controller board is located on the right side of the printer.
-Basic Memory is 32 Mbytes SDRAM.
-Field F/W upgradeable FLASH ROM firmware for controller, 1024 byte EEPROM
-Printing Resolution :
Native 600 x 600 dpi standard
Resolution can be enhanced up to 2400 x 600 dpi class, 1200 x 600 dpi (default), 600 x 600 dpi
3.4.2 Processor
CHORUSm (300Mhz), Proprietary SOC
3.4.3 Printer Language Emulations
SPL-Color
3.4.4 Memory
The controller has 32 MB SDRAM and 4 MB flash ROM on Board.
Service Manual
3-19
Samsung Electronics
System Overview
3.4.5 Interfaces
The system supports the following standard interfaces:
One USB port
- USB v.2.0 compliant
- Color-coded to meet WHQL requirements, connector must be Pantone 426C
One 10/100 BaseT network connector
- The printer supports an internal Network Interface that can be installed pre-configured on the video
controller board at the factory. This supports all of the major Network Operating Systems such as the Novell
NetWare, TCP/IP, etc. Details of the network specification will be provided separately.
3.4.6 Control Panel
No LCD, 2 keys and 6LEDs
3.4.7 Periodic Replacing Parts
Samsung shall specify parts requiring replacement and the frequency of replacement. The parts identified may be
deemed customer replaceable parts. Periodic replacement parts shall be recommended as follows
Item(s)
Pages Printed
Part number
Remark
User
Black toner cartridge
Approx. Initial : 1,500 pages*
Sales : 2,000 pages*
CLP-K300A
Replacement
Color toner cartridge
Imaging unit
Approx. Initial : 700 pages*
CLP-C300A:Cyan
CLP-M300A:Magenta
CLP-Y300A:Yellow
Sales : 1,000 pages*
Approx. 20,000 black pages or approx.
12,500 color pages
CLP-R300A
Waste toner
container
Approx. 5,000 images** or Approx.
1,250 pages (fulll color standard image)
CLP-W300A
Pick-up roller
Fuser unit
Approx. 50,000 pages
Contact a service
representative
Engineer
Approx. 100,000 black pages
or 50,000 color pages
Replacement
T2 roller
ITB
Approx. 100,000 pages
Approx. 60,000 black pages
or 15,000 color pages
* Average A4-/letter-sized page count based on ISO 19752 Standard coverage of individual colors on each page. Usage
conditions and print patterns may cause results to vary.
** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life
of this item will be reduced by 25%.
Service Manual
3-20
Samsung Electronics
System Overview
3.4.8 Power Switch
The Switch is located at rear-side of printer and must be marked to indicate on and off.
3.4.9 Operator Panel
LCD: None
KEY: 2 keys (Stop, Black only)
LED: 6 LEDs (C, M, Y, K Toner, Status, Black only)
3.4.10 Sensor
Paper empty (Cassette)
3.4.11 CRUMS
The CLP-300 Series engine will be equipped with electronics that can read and write data into NVRAMs otherwise
known as CRUMs that reside within 1) C, M, Y, K Toner cartridges and 2) Imaging kit(Developer, OPC, ITB). The CRUM
has a company ID, and Samsunga electronics logo.
The toner CRUM also identifies the type of toner cartridge (Standard or High Capacity). The CRUMs contain fixed data
such as the low warning point, specified life point, and hard stop point (on toner, not on IBT unit) and also store the cur-
rent life count (pages count, pixels count, images count) and % of usage (gas gauge) data.
3.4.12 LOW / OUT Behavior for consumables
The consumable low and out behavior on CLP-300 Series engine is specified by SEC.
FP
message
Device for life end
detection
Law(90%)
Life(100%)
Hard stop
Reset to 0
Toner
CRUM
CRUM
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes(115%)
No
Imaging Kit
Fuser
No
No
No
No
No
Yes
Yes
No
T2 Roller
Pick-up
No
No
Service Manual
3-21
Samsung Electronics
S/W Structure and Descriptions
4. S/W Structure and Descriptions
4.1 Architecture
4
The belt CRUM interface board is a transmission belt CRUM interface board of the photoelectric Dry Color Laser
Printer, mounted on the printer body, making it possible to physically combine the body and the belt CRUM board.
Printer Driver
Language Monitor
Status Monitor
Network Card F/W
Printer F/W
4.2 Language Monitor
Language Monitor is a part of the Printer Driver and the Windows Spool System. The main roll of the Language
Monitor is that sends a job start message to the Status Monitor. Therefore the Status Monitor
can start polling to get the printer status.
The second roll is that sends the job information such as User ID and Job ID to the Status Monitor and the Printer
F/W. Hence the Status Monitor can stop polling because the Printer F/W informs the Status Monitor that printing
job is complete.
4.3 Status Monitor
Status Monitor has no user interface. It shows only HTML help when any error occurs during printing jobs.
Service Manual
4-1
Samsung Electronics
S/W Structure and Descriptions
4.4 Network Interface
User ID + Job ID
+
Printer Data
Printer Data
Language
Monitor
Printer Driver
Printer Server
(Kernel / NPC)
Printer Name
Port Name
Printer Server
(Kernel / NPC)
Job ID
User ID
Job ID
Printer Server IP Addr
SNMP
Request Printer Status
Printer Status
Status Monitor
Request Job Status
Job Table
Status Monitor Data Flow
After polling is started, Status Monitor has to know when it stops the polling. For this reason, the Network
Printer Server should inform of completing job when the printing job is finished.
When Status Monitor requests a job status, the Printer Server returns the job table that contains user id, job
id, and job status (printing or complete or canceled).
4.5 Printer Driver <-> Status Monitor
The Printer Driver and the Status Monitor can set/get some data to the system registry to share the Status Monitor
information such as the polling interval.
When the user wants to set the option of the Status Monitor manually, he or she can set it using the Printer Driver
User Interface. So, if the user set option that the Status Monitor is disabled, the Status Monitor can’s show HTML
Help to the user although the error has occurred while printing.
Set option value
enable/disable
or
Set last error status
polling interval
System
Registry
Status Monitor
Printer Driver
Get option value
enable/disable
or
Get last error status
polling interval
Service Manual
4-2
Samsung Electronics
S/W Structure and Descriptions
4.6 System F/W Flow
Input
Process
Output
PWM
Photo Sensor ( intensity
of radiation )
LED
LED PWM Output
Auto color
registration
sensor
ADC
density
Density pattern
printing
PWM
LED PWM decision
Comparator Threshold
voltage PWM decision
Comparator
LSU
ACR data
Color Registration measure
LPEC2
ACR module
H Sync.
Auto Color Registration
pattern printing
Video data
Color Registration adjustment
Page Sync. modify
P Sync.
LSU
Video signal
generator
L Sync.
clock
Line Sync. modify
Video Clock Freq.
modify
LSU
temperat
ure
sensor
PWM
ADC
SMPS Fan
LSU temperature control
Service Manual
4-3
Samsung Electronics
S/W Structure and Descriptions
4.7 Alarm Shortage
90 ~ 100 %
100 ~ 110 %
110 %~
Toner (C,M,Y,K)
Transfer Belt
Fuser
Ready Yellow Toner Low
Replace Transfer Belt Soon
Replace Fuser Soon
Replace Yellow Toner
Replace Transfer Belt
Replace Fuser
Yellow Toner Empty
Pickup Rollers
(MP/Tray1/Tray2)
Replace MP Pick-Roller
4.8 Error status
1. Missing/Invalid Consumables
Install Cyan (Magenta, Yellow, Black) Toner
Install Transfer Belt
Invalid Cyan (Magenta, Yellow, Black) Toner
Invalid Transfer Belt
2. Paper Empty/Mismatch
Paper Empty In MP(Tray1, Tray2)
Load A4 In MP(Tray1, Tray2)
3. Paper JAM
Jam 0 In MP(Tray1, Tray2)
Jam Inside Printer
Jam In Exit Area
4. Cover
Cover Open : Message toggles between
Cover Open and Install Transfer Belt
SCF Cove Open
5. Service Call : Unrecoverable Error
Engine LSU Error
Main Motor Error / Dev. Motor Error
Engine Fuser Over(Low) Heat Error
Rear Fan Error / Left Fan Error / SMPS Fan Error
6. Others
Memory Overflow Error
Ready IP Conflict
Service Manual
4-4
Samsung Electronics
S/W Structure and Descriptions
4.9 CRUM Overview
- Stands for “Customer Replaceable Unit Monitor”
- EEPROM is used for CRUM Memory.
- CRUM stores various information on consumables
(including consumables’ life).
- In CLP600, total five CRUM’s are used
(four on toner cartridges and one on transfer belt)
CRUM stores the following information
Model Name
Supplier ID
Serial Number
Company ID
MFG Date
Capacity
Page Count
- Toner Cartridge and Transfer Belt
- Indicates how many pages are printed by using the consumable
Dot Count
- Toner Cartridge Only
- Indicates how many dots are printed by using the toner cartridge
4.10 FW Upgrade
Via USB or Network (SWS/SWAS)
You can upgrade F/W via USB or Network whenever the printer is “Ready”
Via Using F/W Download Mode :
Step 1) Power on while pressing the Online Key
Step 2) Press Online Key one more time if “Press Key Again” is displayed on LCD
Step 3) Download F/W via USB
Service Manual
4-5
Samsung Electronics
S/W Structure and Descriptions
4.11 Initailize Flow
Service Manual
4-6
Samsung Electronics
S/W Structure and Descriptions
Service Manual
4-7
Samsung Electronics
Disassembly and Reassembly
5. Disassembly and Reassembly
5
5.1 Precautions When Replacing Parts
5.1.1 Precautions when assembling and disassembling
5.1.2 Precautions when handling PBA
page(5-2)
page(5-2)
page(5-2)
5.2 Parts for Maintenance and Repair
5.2.1 Replacement interval for parts with a limited life
5.2.2 Printer Cleaning
page(5-3)
page(5-3)
page(5-4)
5.3 Information Related in Disassembly and Assembly
page(5-5)
page(5-5)
page(5-5)
page(5-5)
page(5-5)
page(5-5)
5.3.1 Special Service Parts
1) Disassemble of LSU Unit
2) Disassemble of ITB Unit
3) Custody of OPC Unit
4) Custody of Toner Cartridge
5) Disassemble of DEVE Drive Ass’y and Main Drive Ass’y
6) Disassemble of Terminal Parts
page(5-5)
page(5-5)
page(5-5)
page(5-6)
page(5-10)
page(5-10)
7) Disassemble of Fuser Unit
5.3.2 Screws Used in the Printer
5.3.3 Opening Covers and replacing Consumable parts
>> Consumable parts removal
5.4 Disassembly Procedure
5.4.1 Cover Unit
page(5-10)
page(5-10)
page(5-11)
page(5-12)
page(5-12)
page(5-13)
page(5-13)
page(5-14)
page(5-14)
5.4.2 Fuser Ass’y
5.4.3 LSU(Laser Scan Unit)
5.4.4 HVPS(High Voltage Power Supply
5.4.5 Main Board
5.4.6 SMPS(Switching Mode Power Supply)
5.4.7 Drive Ass’y
5.4.8 Transfer Roller
Service Manual
5-1
Samsung Electronics
Disassembly and Reassembly
5.1 Precautions when replacing parts
5.1.1 Precautions when assembling and disassembling
* Use only approved Samsung spare parts. Ensure that part number, product name, any voltage, current or
temperature rating are correct. Failure to do so could result in damage to the machine, circuit overload,
fire or electric shock.
* Do not make any unauthorized changes or additions to the printer, these could cause the printer to mal-
function and create electric shock or fire hazards.
* Take care when dismantling the unit to note where each screw goes. There are 19 different screws. Use of
the wrong screw could lead to system failure, short circuit or electric shock.
* Do not disassemble the LSU unit. Once it is disassembled dust is admitted to the mirror chamber and will
seriously degrade print quality. There are no serviceable parts inside.
* Regularly check the condition of the power cord, plug and socket. Bad contacts could lead to overheating
and firfe. Damaged cables could lead to electric shock or unit malfunction.
5.1.2 Preautions when handling PBA
Static electricity can damage a PBA, always used approved anti-static precautions when
handling or storing a PBA.
>> Precautions when moving and storing PBA
1. Please keep PBA in a conductive case, anti-static bag, or wrapped in aluminum foil.
2. Do not store a PBA where it is exposed to direct sunlight.
>> Precautions when replacing PBA
1. Disconnect power connectors first, before disconnecting other cables
2. Do not touch any soldered connections, connector terminals or other electronic parts when handling
insulated parts.
>> Precautions when checking PBA
1. Before touching a PBA, please touch other grounded areas of the chassis to discharge any static elec-
trical charge on the body.
2. Take care not to touch the PBA with your bare hands or metal objects as you could create a short cir-
cuit or get an electric shock. Take extra care when handling PBAs with moving parts fitted such as sen-
sors, motors or lamps as they may get hot.
3. Take care when fitting, or removing, screws. Look out for hidden screws. Always ensure that the correct
screw is used and always ensure that when toothed washers are removed they are refitted in their orig-
inal positions.
5.1.3 Releasing Plastic Latches
Many of the parts are held in place with plastic latches. The latches break easi-
ly; release them carefully.
To remove such parts, press the hook end of the latch away from the part to
which it is latched.
Service Manual
5-2
Samsung Electronics
Disassembly and Reassembly
5.2 Parts for Maintenance and Repair
5.2.1 Replacement interval for parts with a limited life
Some of the parts in this printer have a limited life, shorter than that of the whole machine. These parts
must be replaced periodically.
The table below shows the interval at which these parts should be replaced.
The table shows the life of each part, and is measured when using A4 paper. When servicing a machine
always check the status of these parts using the control panel and ensure that parts are replaced at the
appropriate times otherwise a general degradation in print quality will occur.
Item(s)
Pages Printed
Part number
Black toner cartridge
Color toner cartridge
Approx. 1,500 pages*
Approx. 700 pages*
CLP-K300A
CLP-C300A:Cyan
CLP-M300A:Magenta
CLP-Y300A:Yellow
Imaging unit
Approx. 20,000 black pages or approx.
12,500 color pages
CLP-R300A
Waste toner
container
Approx. 5,000 images** or Approx.
1,250 pages (fulll color ISO 19752 Standard image)
CLP-W300A
Pick-up roller
Fuser unit
Approx. 50,000 pages
Contact a service
representative
Approx. 100,000 black pages
or 50,000 color pages
T2 roller
ITB
Approx. 100,000 pages
Approx. 60,000 black pages
or 25,000 color pages
* Average A4-/letter-sized page count based on ISO 19752 Standard coverage of individual colors on each page.
Usage conditions and print patterns may cause results to vary.
** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life
of this item will be reduced by 25%.
Service Manual
5-3
Samsung Electronics
Disassembly and Reassembly
5.2.2 Printer Cleaning
A printer should be regularly cleaned, especially if it is used in a dusty environment. This will ensure that
print quality remains high and failure due to contamination of printing services is less likely to occur.
* Clean the printer with a soft, lint free, cloth dipped in a "Recommended cleaner"
"Recommended cleaner" can be purchased from our service center. (where available)
* Do not touch the transfer roller when cleaning the inside of the printer. Grease and oils from the
skin will contaminate the surface and reduce print quality.
* Do not touch transfer roller when cleaning inside of machine. If transfer roller gets dirty, printing
quality could be low.
* Please refer to the User Manual for cleaning instructions.
Service Manual
5-4
Samsung Electronics
Disassembly and Reassembly
5.3 Information Related to Disassembly and Assembly.
5.3.1 Special service parts
Never disassemble or adjust the items mentioned, a stock of these items should be maintained.
1) Disassembly of the LSU unit
4) Disassembly of DEVE drive ass'y
and the main drive ass'y
There are no serviceable parts inside the
LSU. Alignment of the mirrors is critical.
Opening the LSU will allow dust into the
laser and significantly reduce print quality.
It is very dangerous to operate or service
a machine with the LSU open or system
interlocks disabled. Exposure to laser
radiation can cause blindness.
The alignment of the drive mechanism is
critical and it has been set up in factory
using a jig and a driving gear. It is adjust-
ed for the best gearing alignment. If the
motor is disassembled alignment would
not be maintained and this could cause
operational noise and image problems:
image alignment and toner distribution
may be affected.
2) Disassembly of the ITB unit
Do not disassemble the ITB. The align-
ment of the home sensor is critical and is
set up in the factory on a special jig.
Incorrect re-assembly will cause print
quality degradation.
5) Disassembly of terminal parts
Do not adjust the variable resistors on the
PBA. They have been already adjusted in
the factory.
3) Care of the Toner cartridge
6) Disassembly of the fuser unit
Toner cartridges contain an extremely fine
powder. Please keep toner cartridges
away from children. The toner powder
contained in the toner cartridge may be
harmful and if swallowed you should con-
tact a doctor. Take care not to spill toner -
spillages should be cleaned with a
vacume cleaner and washed in could
water (hot water sets the toner). Do not
touch the developer roller surface as cont-
amination will reduce print quality. Take
care not to damage the roller's surface
when installing or removing a toner car-
tridge.
- The fuser melts toner onto the paper at
a high temperature: therefore, you need
to take special care not to get burned by
a hot fuser. When removing the fuser
from a set that has recently been operat-
ing you need to take extra care.
- Do not touch an AC line (Copper con-
tact) on a main frame even after remov-
ing the fuser.
7) When you replace ITB Unit,
be careful with following things;
- When you replace ITB Unit, carefully handle
with ITB Belt. If not, it harms ITB Belt.
- Do not turn ITB Belt back and forth.
If not, waste toner powder would be leaked.
- When shutter is working on an outlet of
waste toner, be careful that waste toner
powder would be leaked
Service Manual
5-5
Samsung Electronics
Disassembly and Reassembly
5.3.2 Screws used in the printer
The screws listed in the table below are used in this printer. Please ensure that, when
you disassemble the printer, you keep a note of which screw is used for which part and
that, when reassembling the printer, the correct screws are used in the appropriate
places.
Service Manual
5-6
Samsung Electronics
Disassembly and Reassembly
Service Manual
5-7
Samsung Electronics
Disassembly and Reassembly
Service Manual
5-8
Samsung Electronics
Disassembly and Reassembly
Service Manual
5-9
Samsung Electronics
Disassembly and Reassembly
5.4 Disassembly Procedure
5.4.1 Cover Unit
1. Open a Front-Cover and Remove the Imagine Unit.
3. Unscrew 2 screws on the Top Cover and then remove
the Top Cover.
2. Remove the ITB Unit
1) Pull out the unit toward out side of printer slightly.
2) Lift up the unit gently.
4. Unscrew 1 screw on the Right Cover and then
remove the Right Cover after open the Rear Cover.
3) Pull out the unit gently.
Service Manual
5-10
Samsung Electronics
Disassembly and Reassembly
5. Remove the Left Cover.
5.4.2 Fuser Ass’y
1. Unscrew 4 screws on the Fuser after open the Rear
Cover.
3. Take out the Fuser Ass'y from Printer.
2. Push the Holder Shaft Fuser as shown in Picture.
Service Manual
5-11
Samsung Electronics
Disassembly and Reassembly
5.4.3 LSU(Laser Scan Unit)
1. Follow step 1 through step 3 in Cover Unit
Disassembly
3. Remove 4 screws and then take out the LSU.
2. Lift up the LSU Cover(as shown in Picture) and then
take out.
5.4.4 HVPS(High Voltage Power Supply)
1. Follow step 1 through step 5 in Cover Unit
Disassembly except removing Righ Cover
2. Unscrew 6 screws and then take out the HVPS.
Be careful of taking out the HVPS because there are
7 High Voltage Terminal behind HVPS.
Service Manual
5-12
Samsung Electronics
Disassembly and Reassembly
5.4.5 Main Board
1. Follow step 1 through step 4 in Cover Unit
Disassembly
2. Unscrew 5 screws and then take out the Main Board
after plug out all the Harness.
5.4.6 SMPS(Switching Mode Power Supply)
1. Follow step 1 through step 4 in Cover Unit
Disassembly
3. Unscrew 2 screws and then take out the SMPS after
plug out all the Harness.
2. Remove the Main Board
Service Manual
5-13
Samsung Electronics
Disassembly and Reassembly
5.4.7 Drive Ass’y
1. Follow step 1 through step 4 in Cover Unit
Disassembly
3. Remove the SMPS
4. Unscrew 8 screws and then take out the Drive Ass’y.
2. Remove the Main Board
5.4.8 Transfer Roller
1. Open Rear Cover.
2. Pull back the hook, which holds the Roller, like below
picture and remove the Transfer Roller
Service Manual
5-14
Samsung Electronics
Alignment and Adjustmens
6. Alignment and Adjustments
This chapter describes some of the main service procedures including:
6
Using the EDC mode; Clearing paper jam and test patterns.
Much of this chapter is also included in the user's guide.
6.1. Control Panel
6.1.1 Overview
- The CLP-300 printers do not have LCD panel which is used in other color model printers. On the contrary
to other models of color printers, they show the status of the printer only with their LEDs.
- The CLP-300 printers have 2 keys and 6 LEDs. The ‘User Interface’ module handles the processing of the
‘Key Press’ and ‘Led control’ at different states of the machine.
6.1.2 Architecture
KEY (2 key): Stop key, Black only key
LED (6 LEDs):
4 LED for CMYK toners : toner-low(cyan, magenta, yellow, black) LEDs
1 LED for status : ready (green) or error(red) status LED (two color LED)
Stop
1 LED for Black only: If Black only key is pressed, Black only led glows.
Status
Black Only
CLP-300
6.1.3 Data and Control Flow
User interface (panel) is made up of
- KEY input detection & process
- LED control
The initial process to use the panel checks register°Øs values of key and LED.
If user input key value, the operation to be defined by key value is processed and the LED operation to be
defined by printer status is controlled.
Service Manual
6-1
Samsung Electronics
Alignment and Adjustmens
6.2 Function
6.2.1 KEY Function
There are two keys present. The one is Stop key and the other is Black only key.
If users input key value, the key input is transferred via GIP (General Input Port) and the operation to be
defined by key value is processed.
6.2.1.1 Functions
Stop key function is made up of
- Demo page/Configuration sheet printing function
- Job cancels function
- Start manual feeding function
- Firmware downloads mode function
Black only key function is made up of
- Change printer mode to Black-only mode function
- Black only LED light function
6.2.1.2 Detail Description
KEY input detection & process order
1) User KEY input
2) KEY input detection
: If the key input is detected when the key input check per timer tick 10ms, The 10ms interrupt service
routine sends the key detection event to panel task.
3) KEY input process
Stop key input process
: After the panel task is received the Stop key detection event, it checks the engine error status two times
and process the operation to be defined by key value.
- Demo page/Configuration sheet function
This button will have multiple functions when the printer is in idle state.
Demo page printing
Press and hold this button for about 2 seconds until the control panel lights blink slowly to print a
demo page.
Configuration sheet printing
Press and hold this button for about 6 seconds until the control panel lights blink rapidly to print a con-
figuration sheet.
- Job cancels function
When the printer is printing an active printing job, press and holds this button until the control panel
lights blink to cancel a job the printer is currently except the manual job.
- Start manual feeding function
When you select manual feed for paper source, press this button each time you feed a sheet of paper
manually.
The application of manual feeding function in CLP-300 will be determined
Service Manual
6-2
Samsung Electronics
Alignment and Adjustmens
- Firmware downloads mode function
Turn on the printer at the same time that the button is pressed.
If all LEDs scroll, release the button and download the firmware ROM file via USB port
Black only key input process
: After the panel task is received the Black only key detection event, it changes printer mode to Black only
mode and notifies driver that the printer mode is changed to Black only mode. If printer mode is Black
only mode, driver makes printer image by only mono excepting color and the Black only LED glows.
6.2.2 LED Function
There are six LEDs present. Status led indicate the error/online status of the printer in idle mode. In error
mode, the status LED glows by red color and in ready mode, it glows by green color. The other four LEDs
indicate the toner status. If the black toner needs to change, the toner-low (black) LED glows and if the
color (yellow, magenta, cyan) toners need to change, the toner-low (yellow, magenta, cyan) LED glows.
Black only LED indicate the printer mode. If the users press the Black only button, the printer mode
changes to Black only mode and Black only LED glows.
6.2.2.1 Functions
LED function is made up of
- Ready/Printing status display
- Error status display
- Toner low status display
- Black only status display
6.2.2.2 Detail Description
LED control order
1) Control LED according to current printer state
: After the panel task is received each event, the LED operation is controlled by current printer status.
2) Write LED value to GOP (General Output Port)
Service Manual
6-3
Samsung Electronics
Alignment and Adjustmens
LED behavior
Status LED
(Green/Red)
Black-only
Toner-low
(CMYK)LEDs
Status
LED
N/A
N/A
Green LED ON
N/A
N/A
Ready to receive the data.
Green LEDS
Receiving the data from the host.
LOWLY BLINK
Green LED
FAST BLINK
N/A
N/A
N/A
N/A
Printing the page.
Red LED BLINK
Paper source is set to MANUAL .
Need to push the button to start the
printing
Red LED ON
Red LED ON
Red LED ON
Green/Red BLINK
N/A
N/A
N/A
N/A
BLINK
N/A
N/A
N/A
N/A
ON
N/A
Out of paper
N/A
Cover open
N/A
Paper jam
CMYK BLINK
Toner-low(black) ON
Toner-low(cyan) ON
Toner-low(magenta) ON
Toner-low(yellow) ON
N/A
Service error ( LSU or Fuser error)
Black toner needs to change
Cyan toner needs to change
Magenta toner needs to change
Yellow toner needs to change
Black only key is pressed
N/A
N/A
N/A
N/A
Service Error LED Operation
All LEDs blink the each time interval.
Service Error
LED operation
Fuser Error
Open Fuser Error
No Heat Error
Over Heat Error
P Motor Error
H Sync Error
All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink
a time interval of 1 second.
All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink
a time interval of 4 seconds.
All LEDs (Toner low LEDs, Status (Green/Red) LED, Black only
LED) blink a time interval of 1 second.
Scanner Error
(=LSU Error)
All LEDs (Toner low LEDs, Status (Green) LED, Black only
LED) blink a time interval of 1 second.
All LEDs (Toner low LEDs, Status(Green) LED, Black only LED)
blink a time interval of 4 seconds.
Service Manual
6-4
Samsung Electronics
Alignment and Adjustmens
Assert Error LED Operation
The panel LED operation display the line number of assert error occurrence.
Line number
LED operation
start & end
All LEDs(Toner low LEDs, Status(Red) LED, Black only LED) turn ON for approximately 2 sec-
onds and then All LEDs turn OFF for approximately 3 seconds.
1
2
3
4
5
6
7
8
9
After Status (Red) LED blinks one time, Toner low LEDs blink one time.
After Status (Red) LED blinks two times, Toner low LEDs blink one time.
After Status (Red) LED blinks three times, Toner low LEDs blink one time.
After Status (Red) LED blinks four times, Toner low LEDs blink one time.
After Status (Red) LED blinks five times, Toner low LEDs blink one time.
After Status (Red) LED blinks six times, Toner low LEDs blink one time.
After Status (Red) LED blinks seven times, Toner low LEDs blink one time.
After Status (Red) LED blinks eight times, Toner low LEDs blink one time.
After Status (Red) LED blinks nine times, Toner low LEDs blink one time.
Service Manual
6-5
Samsung Electronics
Alignment and Adjustmens
6.3 Jam Removal
When a jam occurs while printing a jam message is displayed on the control panel.
* Jam0 In Tray 1:
Paper jam in the main cassette.
* Jam0 In MP Tray:
Paper jam in the MP tray
* Jam Inside Printer:
Jam 1, Paper is jammed inside the printer.
* Jam In Exit Area:
Jam2, Paper is jammed in the exit area when ejecting paper.
CAUTION: When removing jammed paper, always pull it firmly and evenly without any sudden jerks. If
at all possible, remove the paper as a single sheet. If the paper tears ensures ALL paper
fragments are removed. Any fragments left inside the machine will cause it to jam again.
6.3.1 Clearing Paper Jams
NOTE: When removing paper that is jammed in the printer, if possible always pull the paper in the direction
that it normally moves so as not to damage internal components. Always pull firmly and evenly; do
not jerk the paper. If the paper tears, ensure that all fragments of paper are removed; otherwise a
jam will occur again.
If a paper jam occurs, the Status LED on the control panel lights red. Find and remove the jammed paper.
To resume printing after clearing paper jams, you must open and close the front cover or rear cover.
1. To remove the jammed paper, open the rear
cover.
2. Carefully remove the paper by pulling in the
direction as shown below. Most of the jammed
paper can be removed in this step.
If you cannot find the jammed paper, or if there
is any resistance removing the paper, stop
pulling and go to the next step.
Service Manual
6-6
Samsung Electronics
Alignment and Adjustmens
3. Close the rear cover and then open the top
cover.
5. Close the top cover. Make sure that it is
securely latched.
6. Open and then close the rear cover or front
cover to resume printing.
4. Holding the inner cover open, carefully take the
jammed paper out of the printer. The inner
cover will then close automatically.
Service Manual
6-7
Samsung Electronics
Alignment and Adjustmens
6.3.2 Tips for Avoiding Paper Jams
By selecting the correct paper types, most paper jams can be avoided.
• Follow the procedures Jam remove. Ensure that the adjustable guides are positioned correctly.
• Do not overload the paper tray.
• Do not remove the paper from the tray while printing.
• Flex, fan, and straighten the paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
• Use only recommended print materials.
• Ensure that the recommended print side of print materials is facing up in the paper tray.
Service Manual
6-8
Samsung Electronics
Alignment and Adjustmens
6.4 Sample Pattern
This product provides several printable test patterns for maintenance purposes. These patterns can be used to aid the
diagnosis of print quality problems.
6.4.1 Printing a Demo Page
Print a demo page to make sure that the printer is operating correctly.
To print a demo page: In ready mode, press and hold the Stop button for 2 seconds.
A demo page showing the printer’s features and capabilities is printed.
6.4.2 Printing a Configuration Page
You can print a configuration page from the printer’s control panel. Use the configuration page to view the current
settings, to help troubleshoot problems.
To print a configuration page: In ready mode, press and hold the Stop button on the control panel for 5 seconds.
A configuration page prints out.
Service Manual
6-9
Samsung Electronics
Alignment and Adjustmens
Service Manual
6-10
Samsung Electronics
Alignment and Adjustmens
Service Manual
Samsung Electronic
6-11
Samsung Electronics
Alignment and Adjustmens
6.5 Periodic Defective Image
If an image defects appears at regular intervals on the printed-paper, it is due to a faulty or damaged roller.
Refer to the table below and check the condition of the appropriate roller.
No
Roller
Period
Phenomenon
1
2
3
4
5
6
7
OPC Drum
Charge Roller
Supply Roller
Developing Roller
1st Transfer Roller
2nd Transfer Roller
Heat Roller
188.5 mm
37.7mm
47.5mm
26.0mm
32.7mm
57.5mm
86.6mm
White and Black Spots
Black Spot and line and Periodic Band
Periodic Band by little difference of density
White Spot, Horizontal black band
Ghost, Damaged Image by abnormal tranfer
Ghost, Damaged Image by abnormal tranfer
Black Spots or Vertical Black Band
8
Pressure Roller
86.6mm
Background
Service Manual
6-12
Samsung Electronics
Alignment and Adjustmens
6.6 How to use EDC (Engine Diagnostic Control) Mode
EDC Mode is feature that allows the engineer to check the condition of the print engine. It can check the operating condi-
tion of the motors, sensors, solenoids and clutches, measure the High Voltage from the HVPS and check the operation of
the fuser and LSU.
6.6.1 Enterence
When trying to check the CLP-300 Series EDC Mode, additional EDC execution program needed.
[ Procedure of EDC Mode operation ]
a) First, turn on the Power of Printer, wait until Ready state
b) In this state, Run the EDC program on the computer
c) After that, click the menu of screen
d) Then <Motor Test> appears on the initial screen
e) Should you get out of this program, press Exit of screen
6.6.2 Keys
Key
Discription
Exit
Close program
Update LCD
Menu
Update value (ex : sensor value)
Move to the top menu
Move test item
Left/Right arrow
Enter
Start testing or select Sub-item
Stop testing or the upper menu
Upper level
6.6.3 EDC Map
Service Manual
6-13
Samsung Electronics
Alignment and Adjustmens
6.6.3.1 Motor Test
Item
Discription
Main Motor
If motor lock signal is normal, “Successed” message will be displayed.
When motor lock signal is abnormal, “failed” message will be displayed.
When “Upper Level” is pushed, “off ” message will be displayed.
6.6.3.2 Solenoid Test
Item
Discription
Dev Clutch
When select key is pushed, Dev Clutch ON message will be displayed.
Upper Level is pushed, Dev Clutch Off message will be displayed.
Y Relay
When select key is pushed, Y Relay ON message will be displayedUpper
Level is pushed, Y Relay Off message will be displayed on.
M Relay
When select key is pushed, M Relay ON message will be displayedUpper
Level is pushed, M Relay Off message will be displayed.
C Relay
When select key is pushed, C Relay ON message will be displayedUpper
Level is pushed, C Relay Off message will be displayed.
K Relay
When select key is pushed, K Relay ON message will be displayedUpper
Level is pushed, K Relay Off message will be displayed.
Y Toner
When select key is pushed, Y Toner ON message will be displayedUpper
Level is pushed, Y Toner Off message will be displayed.
M Toner
When select key is pushed, M Toner ON message will be displayedUpper
Level is pushed, M Toner Off message will be displayed.
C Toner
When select key is pushed, C Toner ON message will be displayedUpper
Level is pushed, C Toner Off message will be displayed.
K Toner
When select key is pushed, K Toner ON message will be displayedUpper
Level is pushed, K Toner Off message will be displayed.
Regi Clutch
T2 Clutch
ITB Clutch
Tray1 Clutch
Regi. Sensor
Exit Sensor
Waste Box
Cover
When select key is pushed, REGI Clutch ON message will be displayed.
Upper Level is pushed, REGI Clutch Off message will be displayed.
When select key is pushed, T2 Clutch ON message will be displayed.
Upper Level is pushed, T2 Clutch Off message will be displayed.
When select key is pushed, ITB Clutch ON message will be displayed.
Upper Level is pushed, ITB Clutch Off message will be displayed.
When select key is pushed, Tray1 Clutch ON message will be displayed.
Upper Level is pushed, Tray1 Clutch Off message will be displayed.
If actuator is checked by sensor, "Without Paper" message will be displayed. if
not, "With Paper" message will be.
If actuator is checked by sensor, "Without Paper" message will be displayed. if
not, "With Paper" message will be.
If waste Box exists , Installed message will be displayed.
If not, Not Installed message will be.
If cover is opened, " Opened message will be displayed.
If not, "Closed" message will be.
Tray1 Empty
If paper exists in the tray, "With Paper" will be displayed.
If not, "Without Paper" message will be.
Service Manual
6-14
Samsung Electronics
Alignment and Adjustmens
6.6.3.3 LSU/ Fuser Test
Item
Discription
LSU Motor
If LSU motor lock signal is normal, "Successed" message will be displayed.
When LSU motor lock signal is abnormal , failed" message will be displayed.
When Upper Level is pushed, off message will be displayed.
LSU Power
Laser Diode
PTL
When select key is pushed, LSU Power On message will be displayed.
If not, LSU Power Off" message will be.
When select key is pushed, Laser Diode On message will be displayed.
If not, Laser Diode Off message will be.
When select key is pushed, PTL On message will be displayed .
If not, PTL Off message will be.
Fuser
When select key is pushed, Fuser On message will be displayed.
If not, Fuser Off message will be.
Service Manual
6-15
Samsung Electronics
Alignment and Adjustmens
6.6.3.4 HVPS Test
Item
Discription
Charger
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
T1
T2
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
T2 REVERSE
Dev DC
When select key is pushed, T2 REVERSE On message will be displayed.
If not, T2 REVERSE Owill be.
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
Dev AC Vpp
Dev AC
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
When select key is pushed, DUTY : x%* message will be displayed.
And then Left/Right arrow is selected, x% is increased or decreased.
And DUTY : x% message will be displayed. * is disappeared.
And then select key is pushed, x%* message will be displayed.
When Upper Level is pushed, * is disappeared.
Charger
T1
Duty : 50% -> -789V , Range : -81V ~ -1689V
Duty : 50% -> 1159V , Range : 122V ~ 2188V
Duty : 50% -> 2552V , Range : 264V ~ 4730V
Duty : 50% -> -269V , Range : -1V ~ -591V
Duty : 50%-> 1210V , Range : 800V ~ 2160V
T2
Supply DC
AC, Vpp
Service Manual
6-16
Samsung Electronics
Alignment and Adjustmens
6.6.3.5 Maintenance
Item
Discription
Fuser
When select key is pushed, Initialized message will be displayed.
When Upper Level is pushed, Off message is disappeared.
Transfer
Pick Up Roll
ITB
When select key is pushed, Initialized message will be displayed.
When Upper Level is pushed, Off message is disappeared.
When select key is pushed, Initialized message will be displayed.
When Upper Level is pushed, Off message is disappeared.
When select key is pushed, Initialized message will be displayed.
When Upper Level is pushed, Off message is disappeared.
6.6.3.6 Error list and recovery
Paper Empty / Paper Mismatch
- Load specified paper in the tray 1
Paper does not exist in the tray1
Load Paper, When you still want to continue printing
- Paper mismatch in the tray 1
Paper is mismatched
Press stop key for a while, When you still want to continue printing
Cover Open
- Cover Open
Cover is opened
Close the door, When you still want to continue printing
Waster Tank Full or not installed
- Waste Tank Full
Toner of Waste toner box is full
Empty or Insert the waste toner box
Paper Jam
- Paper Jam at the tray1
Paper is not picked up
Cover Open /Close, When you still want to continue printing
- Paper Jam inside printer
There is a paper inside printer
After cover Open , Paper must be removed, and then close the cover
Service Manual
6-17
Samsung Electronics
Alignment and Adjustmens
- Paper Jam at the paper exit area
There is a paper at exit area
After cover Open , Paper must be removed, and then close the cover
- Motor Lock Error
Motor does not run or runs abnormal speed
Motor or Main board must be checked
- LSU Motor Lock Error
LSU motor does not run or runs abnormal speed
Hsync is not detected
LSU or Main board must be checked
- Transfer Belt Error
ITB home sensor is not checked for a normal time
ITB must be checked
- Fuser Over Heat error
Temperature of fuser is high
Fuser or Main board must be checked
- Fuser Low Heat error
Temperature of fuser is low
Fuser or Main board must be checked
- Dev. Home error
Home of Development is not checked or checked at the abnormal time
Clutch of Development or Main board must be checked
- ADC not Confirm Error
Signal of confirmation for ADC is not detected
Main board must be checked
Service Manual
6-18
Samsung Electronics
Alignment and Adjustmens
6.7 Error Message
When the printer experiences an error, the control panel will indicate an error message with the indicator
lights and the Smart Panel program window will display to show the printer’s status or errors. Find the light
pattern below that matches the printer light pattern and follow the solutions to clear the error.
LED status legend
LED pattern
Possible Problem and Solution
The blinking toner cartridge is low. Order a new toner cartridge. You can temporar-
ily improve print quality by redistributing the toner.
The lighting toner cartridge is empty.
Remove the old toner cartridge and install a new one.
The blinking toner cartridge is totally exhausted. Remove the old toner cartridge
and install a new one.
The blinking toner cartridge is wrong. Only install a Samsung toner
cartridge, designed for your printer.
A paper jam has occurred. To solve the problem.
The front cover is open. Close the front cover.
There is no paper in the tray. Load paper in the tray.
The waste toner container is open or full. Check the container.
Your system has some problems. If this problem occurs, contact your service
representative.
Service Manual
6-19
Samsung Electronics
Troubleshooting
7. Troubleshooting
7.1 Procedure of Checking the Symptoms
7
Before attempting to repair the printer first obtain a detailed description of the problem from the customer.
Power On
- No Power
LED Panel
- Power Module error
ON?
- Main PBA
Indicate
"Red Lamp ON"
Status LED
Green OK?
Refer to
"6.2.2 LED Function"
Print(test pattern)
printing
Quality is
Nomal?
Refer to "Solution
of Image Problem"
END
Service Manual
7-1
Samsung Electronics
Troubleshooting
7.2 Troubleshooting Checklist
If the printer is not working properly, consult the following checklist. If the printer does not pass a step, follow the
corresponding troubleshooting suggestions.
Status
Response
Make sure that the Status LED on
the control panel green and
"Ready" is shown on the Smart
Panel program window.
If the Status LED is off, check the power cord connection. Check the
power switch. Check the power source by plugging the power cord into
another outlet.
If the Status LED blinks or lights red, solve the problems.
Print a demo page to verify that the
printer is feeding paper correctly.
If a demo page does not print, check the paper supply in the paper tray.
If the paper jams in the printer, go to "Clearing Paper Jams"
Check the demo page to see if it is
printed correctly.
If there is a print quality problem, go to "Solving Print Quality Problems"
Print a short document from a
software application to verify that
the computer and printer are
connected and communicating
correctly.
If the page does not print, check the cable connection between the printer
and the computer.
Check the print queue or print spooler to see if the printer has been
paused.
Check the software application to ensure that you are using the proper
printer driver and communication port. If the page is interrupted during
printing, go to "Solving General Printing Problems"
If completing the checklist does not
resolve the printer problem, check
the following troubleshooting
sections.
See "Solving General Printing Problems"
See "Solving Print Quality Problems"
See "Common Windows Problems"
See "Common Macintosh Problems"
See "Common Linux Problems"
Service Manual
7-2
Samsung Electronics
Troubleshooting
7.3 Solving General Printing Problems
For problems with the operation of your printer, refer to the table for suggested solutions.
Service Manual
7-3
Samsung Electronics
Troubleshooting
Service Manual
7-4
Samsung Electronics
Troubleshooting
Service Manual
7-5
Samsung Electronics
Troubleshooting
Service Manual
7-6
Samsung Electronics
Troubleshooting
7.4 Solving Print Quality Problems
Dirt inside of the printer or improper paper loading may reduce print quality. See the table below to troubleshoot
problems.
Problem
Solution
If a vertical white streak or faded area appears on the page:
The toner supply is low. You may be able to temporarily extend the toner cartridge life.
If this does not improve print quality, install a new toner cartridge.
The paper may not meet paper specifications (for example, the paper is too moist or too
rough).
Light or faded print
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
A combination of faded or smeared defects may indicate that the printer needs cleaning.
The paper may not meet specifications (for example, the paper is too moist or too rough).
Toner specks
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
If generally rounded, faded areas occur randomly on the page:
A single sheet of paper may be defective. Try reprinting the job.
The moisture content of the paper is uneven or the paper has moist spots on its sur-
face. Try a different brand of paper.
The paper lot is bad. The manufacturing process can cause some areas to reject toner.
Try a different kind or brand of paper.
Dropouts
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
The toner cartridge may be defective. See "Vertical repetitive defects" on the next page.
If these steps do not correct the problems, contact a service representative.
If black vertical streaks appear on the page:
A imaging unit has probably been scratched.
Remove the imaging unit and install a new one.
Vertical lines
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
If white vertical lines appear on the page:
Clean the inside of the printer. If you still have the same problems, replace the imaging
unit with a new one.
Service Manual
7-7
Samsung Electronics
Troubleshooting
Problem
Solution
Color or Black
background
If the amount of background shading becomes unacceptable, the procedures below may
fix the problem.
Change to lighter weight paper.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
heck the printer's environment; very dry (low humidity) or high humidity (higher than
80% RH) conditions can increase the amount of background shading.
Remove one of the old toner cartridges and install a new one.
Clean the inside of the printer.
Check the paper type and quality.
Toner smear
Remove the imaging unit and install a new one.
Vertical repetitive
defects
If marks repeatedly appear on the printed side of the page at even intervals:
Clean the inside of the printer. After cleaning the inside of the printer, if you still have the
same problems, install a new toner cartridge of the problem color.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Parts of the printer may have toner on them. If the defects occur on the back of the
page, the problem will likely correct itself after a few more pages.
The fusing assembly may be damaged. Contact a service representative.
Background scatter results from bits of toner distributed on the printed page.
The paper may be too damp. Try printing with a different batch of paper. Do not open
packages of paper until necessary so that the paper does not absorb too much mois-
ture.
Background scatter
If background scatter occurs on an envelope, change the printing layout to avoid print-
ing over areas that have overlapping seams on the reverse side. Printing on seams can
cause problems.
If background scatter covers the entire surface area of a printed page, adjust the print
resolution through your software application or via the printer properties window.
A
Misformed
characters
If characters are improperly formed and producing hollowed images, the paper stock
may be too slick. Try a different paper.
If characters are improperly formed and producing a wavy effect, the printer may need
service. Verify that it also occurs on a demo page.
Service Manual
7-8
Samsung Electronics
Troubleshooting
Problem
Page skew
Solution
Ensure that the paper is loaded properly.
Check the paper type and quality.
Ensure that the paper or other material is loaded correctly and the guides are not too
tight or too loose against the paper stack.
Ensure that the paper is loaded properly.
Curl or wave
Check the paper type and quality. Both high temperature and high humidity can cause
paper curl.
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Ensure that the paper is loaded properly.
Check the paper type and quality.
Wrinkles or creases
Turn the stack of paper over in the paper tray. Also try rotating the paper 180° in the
tray.
Back of printouts
aredirty
Check for leaking toner. Clean the inside of the printer.
Solid Color or
Black pages
The toner cartridge may not be installed properly.
Remove the toner cartridge and reinsert.
The toner cartridge may be defective and need replacing. Install a new toner cartridge.
The printer may require repair. Contact a service representative.
Service Manual
7-9
Samsung Electronics
Troubleshooting
Problem
Solution
Clean the inside of the printer.
Check the paper type and quality.
Install a new toner cartridge.
Loose toner
If the problem persists, the printer may require repair. Contact a service representative.
Character voids are white areas within characters that should be solid black:
You may be printing on the wrong surface of the paper. Remove the paper and turn it
over.
Character Voids
The paper may not meet paper specifications.
A
If horizontally aligned color or black streaks or smears appear:
A toner cartridge may be installed improperly.
Remove the toner cartridge and reinsert.
Horizontal stripes
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
A toner cartridge may be defective. Install a new toner cartridge.
If the problem persists, the printer may require repair. Contact a service representative.
If the printed paper is curled or paper does not feed into the printer:
Curl
Turn the stack of paper over in the paper tray. Also try rotating the paper 180° in the
tray.
Service Manual
7-10
Samsung Electronics
Troubleshooting
7.5 Common Windows Problems
Problem
Possible Cause and Solution
"File in Use" message appears
during installation.
Exit all software applications. Remove all software from the StartUp Group,
then restart Windows. Reinstall the printer driver.
"Error Writing to LPTx" message
appears.
Ensure that all cables are connected correctly and the printer is on.
If bi-directional communication is not turned on in the driver, it will also
cause this message.
"General Protection Fault",
"Exception OE", "Spool32", or
"Illegal Operation" messages
appear.
Close all other applications, reboot Windows and try printing again.
"Fail To Print", "A printer timeout
error occurred." messages appear.
These messages may appear during printing. Just keep waiting until the
printer finishes printing. If the message appears in standby mode or after
printing has been completed, check the connection and/or whether an error
has occurred.
NOTE: Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User's Guide that came with your PC for further
information on Windows error messages.
7.6 Common Macintosh Problems
Problem
Possible Cause and Solution
The printer does not print a
document from Acrobat Reader.
You should change the Print Method option to Print as Image when you print
from Acrobat Reader.
The document has printed, but the
print job has not disappeared from
the spooler in Mac OS 10.3.2.
Update your Mac OS to OS 10.3.3 or higher.
Service Manual
7-11
Samsung Electronics
Troubleshooting
7.7 Common Linux Problems
Problem
Possible Cause and Solution
I can't change settings in the
configuration tool.
You need to have administrator privileges to be able to change global
settings.
I am using the KDE desktop but
the configuration tool and LLPR
won't start.
You may not have the GTK libraries installed. These usually come with most
Linux distributions, but you may have to install them manually. Refer to your
distribution's installation manual for more details about installing additional
packages.
I just installed this package but
can't find entries in the KDE/
Gnome menus.
Some versions of the KDE or GNOME desktop environments may require
that you restart your session for the changes to take effect.
I get a "Some options are not
selected" error message while
editing the printer settings.
Some printers have conflicting settings, meaning that some settings for two
options can't be selected at the same time. When you change a setting and
the Printer Package detects such a conflict, the conflicting option is changed
to a "No Choice" value. You have to choose an option that does not conflict
before being able to submit the changes.
I can't make a printer the system
default.
In some conditions, it may not be possible to change the default queue. This
happens with some variants of LPRng, especially on recent RedHat systems
that use the "printconf" database of queues.
When using printconf, the /etc./printcap file is automatically refreshed from
the database of printers managed by the system (usually through the "print-
tool" command), and the queues in /etc./printcap.local are appended to the
resulting file. The default queue in LPRng is defined as the first queue in
/etc./printcap, and therefore it is not possible for the Linux Printer Package to
change the default when some queues have otherwise been defined using
printtool.
LPD systems identify the default queue as the one named "lp". Thus, if there
is already a queue by this name, and if it doesn't have an alias, then you
won't be able to change the default. To work around this, you can either
delete the queue or rename it by manually editing the /etc./printcap file.
The N-up setting does not work
correctly for some of my
documents.
The N-up feature is achieved through post-processing of the PostScript data
that is sent to the printing system. However, such post-processing can
only be adequately achieved if the PostScript data conforms to the Adobe
Document Structing Conventions. Problems may arise when using N-up
and other features that rely on post-processing if the document being printed
isn't compliant.
I am using BSD lpr (Slackware,
Debian, older distributions) and
some options chosen in LLPR
don't seem to take effect.
Legacy BSD lpr systems have a hard limitation on the length of the option
string that can be passed to the printing system. As such, if you selected a
number of different options, you may have exceeded the length of the
options and some of your choices won't be passed to the programs
responsible for implementing them. Try to select fewer options that deviate
from the defaults, to save on memory usage.
Service Manual
7-12
Samsung Electronics
Troubleshooting
Problem
Possible Cause and Solution
I am trying to print a document in
Landscape mode, but it prints
rotated and cropped.
Most Unix applications that offer a Landscape orientation option in their print-
ing options will generate correct PostScript code that should be printed as is.
In that case, you need to make sure that you leave the LLPR option set to its
default Portrait setting, to avoid unwanted rotations of the page that would
result in cropped output.
Some pages come out all white
(nothing is printed), and I am using
CUPS.
If the data being sent is in Encapsulated PostScript (EPS) format, some earli-
er versions of CUPS (1.1.10 and before) have a bug preventing them from
being processed correctly. When going through LLPR to print, the Printer
Package will work around this issue by converting the data to regular
PostScript.
However, if your application bypasses LLPR and feeds EPS data to CUPS,
the document may not print correctly.
I can't print to an SMB (Windows)
printer.
To be able to configure and use SMB-shared printers (such as printers
shared on a Windows printer), you need to have a correct installation of the
SAMBA package that enables that feature. The "smbclient" command should
be available and usable on your system.
My application seems to be frozen
while LLPR is running.
Most Unix applications will expect a command like the regular "lpr" command
to be non-interactive and thus return immediately. Since LLPR is waiting
for user input before passing the job on to the print spooler, very often the
application will wait for the process to return, and thus will appear to be
frozen (its windows won't refresh). This is normal and the application should
resume functioning correctly after the user exits LLPR.
How do I specify the IP address of
my SMB server?
It can be specified in the "Add Printer" dialogue of the configuration tool, if
you don't use the CUPS printing system. Unfortunately, CUPS currently
doesn't allow you to specify the IP address of SMB printers, so you will have
to be able to browse the resource with SAMBA in order to be able to print.
Some versions of CUPS, especially those shipped with Mandrake Linux
before the 8.1 release, have some known bugs when processing PostScript
output from some applications. Try upgrading to the latest version of CUPS
(at least 1.1.14). Some RPM packages for the most popular distributions are
provided as a convenience with this Linux Printing Package.
Some documents come out as
white pages when printing.
I have CUPS and some options
(such as N-up) seem to be always
enabled even though I don't
choose them in LLPR.
There may be some local options defined in your ~/ .lpoptions file, which are
manipulated by the lpoptions command. These options are always used
if not overridden by LLPR settings. To get rid of all options for a printer, run
the following command, replacing "printer" with the name of the queue:
lpoptions -x printer
I configured a printer to print to a
file, but I get "Permission denied"
errors.
Most printing systems will not run as the super-user but as a special user
(usually "lp"). Therefore, make sure that the file you have chosen to print to is
accessible to the user owning the spooler daemon.
Service Manual
7-13
Samsung Electronics
Troubleshooting
Problem
Possible Cause and Solution
On my PCL (or GDI) printer, I
sometimes get error messages
printing instead of my document.
Unfortunately, some Unix applications may generate non-compliant
PostScript output that may not be supported by Ghostscript, or even the
printer itself in PostScript mode. You can try to capture the output to a file and
view the results with Ghostscript (gv or ghostview will allow you to do so
interactively) and see if you get error messages.
However, since the application is probably at fault, contact your software ven-
dor to inform them of the issue.
Some color images come out all
black.
This is a known bug in Ghostscript (until GNU Ghostscript version 7.05)
when the base color space of the document is indexed color space and it is
converted through CIE color space. Because Postscript uses CIE color
space for Color Matching System, you should upgrade Ghostscript on your
system to at least GNU Ghostscript version 7.06 or later. You can find recent
Ghostscript versions at www.ghostscript.com.
Service Manual
7-14
Samsung Electronics
Troubleshooting
7.8 Major Problems Trouble shooting
7.8.1 Vertical Line and Band
7.8.2 Vertical White Line
Service Manual
7-15
Samsung Electronics
Troubleshooting
7.8.3 Light Image
7.8.4 Dark Image or black
Service Manual
7-16
Samsung Electronics
Troubleshooting
7.8.5 Background
7.8.6 JAM 0
Service Manual
7-17
Samsung Electronics
Troubleshooting
7.8.7 JAM 1
7.8.8 Multi-Feeding
7.8.9 Not function of the gear of the fuser due to melting away
Service Manual
7-18
Samsung Electronics
Troubleshooting
7.8.10 Paper Empty
7.8.11 Cover Open
7.8.12 Defective motor operation
Service Manual
7-19
Samsung Electronics
Troubleshooting
7.8.13 No Power
7.8.14 Vertical Line Getting Curved
7.8.15 LSU Error
Service Manual
7-20
Samsung Electronics
Exploded Views & Parts List
8. Exploded Views and Parts List
8
Contents
8.1 Main
8-2
8-3
8.2 Top Cover
8.3 Rear Cover
8.4 Front Cover
8.5 Main Driver
8.6 Main Frame
8.7 LSU Cover
8.8 Fuser Unit
8.9 ELA-UNIT OPC DEV
8.10 ITB Unit
8-4
8-5
8-6
8-9
8-10
8-11
8-12
8-13
8-14
8.11 Casstte Unit
Service Manual
8-1
Samsung Electronics
Exploded Views & Parts List
8.1 Main
Service Manual
8-2
Samsung Electronics
Exploded Views & Parts List
8.2 Top Cover
0
3
8
11
9
7
10
2
4
6
1
5
12
Service Manual
8-3
Samsung Electronics
Exploded Views & Parts List
8.3 Rear Cover
0
2
7
1
5
4
9
9
8
3
6
8
10
Service Manual
8-4
Samsung Electronics
Exploded Views & Parts List
8.4 Front Cover
0
2
1
Service Manual
8-5
Samsung Electronics
Exploded Views & Parts List
8.5 Main Driver(1)
Service Manual
8-6
Samsung Electronics
Exploded Views & Parts List
Main Driver(2)
Service Manual
8-7
Samsung Electronics
Exploded Views & Parts List
8.6 Main Frame(1)
Service Manual
8-8
Samsung Electronics
Exploded Views & Parts List
Main Frame(2)
Service Manual
8-9
Samsung Electronics
Exploded Views & Parts List
8.7 LSU Cover
0
2
5
4
4
1
6
3
Service Manual
8-10
Samsung Electronics
Exploded Views & Parts List
8.8 Fuser Unit
Service Manual
8-11
Samsung Electronics
Exploded Views & Parts List
8.9 ELA-UNIT OPC DEV
Service Manual
8-12
Samsung Electronics
Exploded Views & Parts List
8.10 ITB Unit
29
61
9
64
17
13
9
60
72
26
14
21
6
6
31
6
19
6
51
25
76
40
46
23
45
55
27
15
10
27
40
33
53
7
6
34
37
36
6
68
37
56
20
38
43
6
6
57
38
48
41
58
49
30
47
24
7
39
7
54
65
28
44
35
18
32
52
39
5
59
62
42
0
22
8
16
8
50
6
6
Service Manual
8-13
Samsung Electronics
Exploded Views & Parts List
8.11 Casstte Unit
Service Manual
8-14
Samsung Electronics
Parts List
Service Parts List (Model code : CLP-300/XSG)
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.1-1
SEC-Code
Description & Specification
Location Service
JC97-02330A
JC63-00842A
JC63-00847A
JC63-01102B
JC96-03608A
JC96-03610F
JC96-03611A
JC96-03615A
JC96-03614A
JC96-03613A
JC96-03616A
JC97-02332A
JC97-02439A
JC97-02440A
JC97-02659A
JC63-00863A
JC44-00090A
JC44-00089A
JC59-00018E
JC97-02656A
JC96-03609A
JC97-01771A
3903-000042
JC61-01460A
JC63-00846A
JC63-00843A
JC64-00211A
JC63-00860A
6107-001169
6107-001306
6107-001285
6107-001278
6107-001292
JC72-01343A
JC61-01761A
JC66-01297A
JC66-01296A
6044-000001
6044-001005
6002-000440
JC63-00844A
JC64-00215A
JC66-01089A
JC61-01461A
JC61-01456A
JC61-01462A
JC66-01071A
6107-001268
6107-001283
6107-001284
JC96-03990A
JC63-00841A
JC68-01678A
MEA UNIT-FRAME;CLP-300,SEC,WORLD,-,-,-,-
COVER-M-LEFT SIDE;CLP-300,ABS FR,T2.5,23
COVER-M-DUMMY FRONT;CLP-300,ABS FR,T2.5,
SHEET-COVER TOP;CLP-300,PC SHEET,T0.5,W7
ELA UNIT-DRIVE MAIN;CLP-300,SEC,WORLD,-,
ELA UNIT-OPC DEV_SET;CLP-300,SEC,EXPORT,
ELA UNIT-ITB_SET;CLP-300,SEC,WORLD,SET,-
ELA UNIT-TONER TANK C;CLP-300,SEC,EXPORT
ELA UNIT-TONER TANK M;CLP-300,SEC,EXPORT
ELA UNIT-TONER TANK Y;CLP-300,SEC,EXPORT
ELA UNIT-TONER TANK K;CLP-300,SEC,EXPORT
MEA-UNIT CASSETTE;CLP-300,SEC,WORLD,-,-,
MEA UNIT-COVER TOP;CLP-300,SEC,WORLD,-,-
MEA UNIT-COVER REAR;CLP-300,SEC,WORLD,-,
MEA-UNIT COVER FRONT;CLP-300,SEC,WORLD,-
SHIELD-P-MAIN LOWER;CLP-300,SECC,T1.0,99
SMPS-PSP_TYPE3_V2C;SCX-4521F,*,AC/DC,-,2
HVPS-GOGH;-,24V,21.6V~26.4V,-,-,-,-
UNIT-LSU;CLP-300,-,-,STANDARD SINGLEBEAM
MEA UNIT-COVER LSU;CLP-300,SEC,EXPORT,-,
ELA UNIT-FUSER 220V;CLP-300,SEC,WORLD,-,
MEA UNIT-TERMINAL S;CLP-500,SEC,EXPORT,S
CBF-POWER CORD;DT,EU,FP3/YES,IEC320 C13/
GUIDE-M-STACKER COVER;CLP-300,ABS FR V0,
COVER-M-TOP;CLP-300,ABS FR,T2.5,279.3,37
COVER-M-JAM COVER;CLP-300,ABS FR,-,79.4,
KEY-M-OP1;CLP-300,ABS,-,-,36024,-,HF-066
COVER-M-LED;CLP-300,ABS,T1.5,52,77.9,-,-
SPRING-CS;SUS304-WPB,-,PI0.55,D9.3,14.25
SPRING-CS;SUS304-WPB,-,PI0.55,D6.45,L11,
SPRING-CS;SUS304-WPB,-,PI0.45,D8.85,L12,
SPRING-CS;SUS304 WPB,-,PI0.7,D6.9,L20,-,
SPRING-CS;SUS304-WPB,-,PI0.55,-,L11.1,-,
PMO-SUB_M_STACKER;ML-1520,PC,BLACK,39*25
HOLDER-LEVER BLOCKING;CLP-300,PC,2.5,30.
LEVER-MID BLOCKING;CLP-300,PC+GF20,2.5,1
LEVER-BLOCKING;CLP-300,PC,2.5,39.6,30.2,
RING-CS;ID3,OD3,T0.25,BLACK,SUS304
Z4398
Z4399
Z4400
SA
SA
SA
8.1-2
8.1-3
8.1-4
8.1-6
8.1-7
8.1-8
8.1-9
8.1-10
8.1-11
8.1-12
8.1-13
8.1-14
8.1-15
8.1-16
8.1-18
8.1-19
8.1-20
8.1-21
8.1-22
8.1-23
8.1-29
8.1-30
8.2-1
8.2-2
8.2-3
8.2-4
8.2-5
8.2-6
8.2-6
8.2-6
8.2-6
8.2-6
8.2-7
8.2-8
8.2-9
8.2-10
8.2-11
8.2-11
8.2-12
8.3-1
8.3-2
8.3-3
8.3-4
8.3-5
8.3-6
8.3-7
8.3-8
8.3-8
8.3-8
8.3-10
8.4-1
8.4-2
SA
Z4403
Z4404
SA
SA
SA
SNA
SNA
SNA
SNA
SA
SA
SA
SA
Z4405
Z4406
Z4407
Z4408
SNA
SA
SA
SA
SA
SA
SA
SA
D2114
Z4410
Z4411
Z4412
Z4413
K3635
C0022
SNA
SNA
SNA
SA
SNA
SA
Z4414
Z4415
SA
SNA
SA
SNA
SA
Z4416
Z4139
SNA
SNA
SNA
SNA
SA
RING-CS;ID4.8,OD10.0,T0.25,PASS,SUS-30
SCREW-TAPPING;PWH,+,-,2,M3,L8,ZPC(BLK),S
COVER-M-REAR;CLP-300,ABS,T3.0,249.3,296.
BUTTON-M-OPEN REAR;CLP-300,ABS FR V0,80.
SHAFT-P-LOCKBAR REAR;CLP-300,SECC,284,6,
HOLDER-M-HOOK REAR R;CLP-300,POM,T5.0,19
HOLDER-M-HOOK REAR L;CLP-300,POM,T5.0,19
HOLDER-M-HOOK REAR C;CLP-300,POM,T5.0,19
LEVER-M-REAR LOCK;CLP-300,HIPS,T2.5,55.1
SPRING-TS;SUS304 WPB,-,PI0.9,D8.9,L7,-,-
SPRING-TS;SWRS82A,-,1.0X0.6,D13.70,L12.1
SPRING-TS;SWRS82A,-,0.75X0.5,-,L8.4,-,-,
Z4417
Z4418
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
Z4419
Z4420
SA
SNA
SA
ELA UNIT-TRANSFER;CLP-300,SEC,EXPORT,-,-
COVER-M-FRONT;CLP-300,ABS FR,T2.5,185.3,
LABEL-INSTRUCTION;CLP-300,-,YUPO 150G,15
Z4421
SNA
SNA
1
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.5-1
8.5-2
8.5-2
8.5-2
8.5-2
8.5-2
8.5-3
8.5-4
8.5-5
8.5-6
8.5-7
8.5-8
SEC-Code
Description & Specification
Location Service
SNA
JC61-01450A
6031-001528
6031-001051
6031-001543
6031-001547
6031-001577
JC66-01042A
JC66-01052A
JC66-01041A
6107-001271
JC66-01047A
JC66-01065A
JC66-01046A
JC66-00763A
JC47-00007E
JC66-01208A
JC66-01045A
JC66-01048A
JC66-01054A
JC63-01049A
JC66-01051A
JC66-01055A
JC66-01050A
JC66-01044A
JC66-01053A
JC66-01043A
6031-001255
JC66-00771A
JC61-01459A
JC66-01061A
JC66-01064A
6003-000301
6003-000152
6002-000308
JC66-01060A
JC66-01057A
6044-000159
6001-000130
6001-000485
JC66-01070A
JC66-01155A
6044-000231
JC66-01068A
JC66-01067A
JC31-00041A
JC33-00015C
6003-000269
JC61-01458A
6003-000196
JC67-00130A
JC97-01788B
JC66-01066A
JC92-01720A
JC61-01453A
JC66-01097A
JC61-00699A
6502-001093
BRACKET-P-DRIVE MOTOR;CLP-300,SECC,T1.2,
WASHER-PLAIN;POLYMIDE,-,ID6,OD13.5,T0.5,
WASHER-PLAIN;M4,ID4.1,OD7.0,T0.13,*,POLY
WASHER-PLAIN;POLY,-,ID5.1,OD8,T0.13,-,-
WASHER-PLAIN;POLY,-,ID6.5,OD12,T0.5,-,-
WASHER-PLAIN;POLY,-,ID5.1,OD14,T0.5,BLK,
GEAR-IDLE DEVE Z19;CLP-300,POM,M0.8,Z19,
GEAR-RDCN DEVE CAM;CLP-300,POM,M0.8/M0.6
GEAR-DEVE COUPLING;CLP-300,POM,M0.8,Z18,
SPRING-CS;SUS304 WPB,-,PI0.55,D6.75,L9.0
GEAR-IDLE Z39;CLP-300,POM,M0.8,Z39,-,WHI
GEAR-TONER DRIVE;CLP-300,POM,M0.8/Z0.8,Z
GEAR-IDLE Z33;CLP-300,POM,M0.8,Z33,-,WHI
GEAR-M-PICK UP IDLE;CLP-600,POM,M0.8,SPU
MEP-CLUTCH CAM;-,CLP-300,-,DC24V,0.133A,
GEAR-RDCN FUSER CAM;CLP-300,POM,M0.8/Z0.
GEAR-IDLE ITB Z43;CLP-300,POM,M0.5,Z43,-
GEAR-ITB DRIVE;CLP-300,POM,M0.5/M0.5,Z10
GEAR-RDCN OPC;CLP-300,POM,M0.5/M0.6,Z79/
SHEET-HOUSING ITB;CLP-300,PET FILM,T0.18
GEAR-RDCN DEVE;CLP-300,POM,M0.5/M0.8,Z73
GEAR-RDCN P_PATH;CLP-300,POM,M0.5/M0.8,Z
GEAR-PICK UP DRIVE;CLP-300,POM,M0.8/M0.8
GEAR-FUSER DRIVE 1;CLP-300,POM,M0.8,Z45,
GEAR-RDCN EXIT;CLP-300,POM,M0.8/M0.8,Z51
GEAR-DEVE DRIVE;CLP-300,POM,M0.6,Z21,-,W
WASHER-PLAIN;NYLON,CUTTING,ID5,OD9,T0.5,
GEAR-_M_IDLE PICKUP;CLP-600,POM,M0.8,SPU
BRACKET-M-DRIVE FRONT;CLP-300,PC,T2.5,W1
SHAFT-IDLE D8;CLP-300,SUM24L+NI,L16.7,D1
GEAR-IDLE Z37;CLP-300,POM,M0.8,Z37,-,WHI
SCREW-TAPTITE;BH,+,S,M4,L6,ZPC(YEL),SWRC
SCREW-TAPTITE;PH,+,B,M2,L10,ZPC(YEL),SWR
SCREW-TAPTITE;PH,+,B,M2.6,L6,ZPC(YEL),SW
SHAFT-WORM GEAR;CLP-300,SUM24L+NI,L44.6,
GEAR-WORM DEVE CAM;CLP-300,POM,M0.6/M0.6
RING-C;ID3,OD7,T0.6,PASS,STSC
Z4422
SA
SNA
SNA
SNA
SNA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
Z4423
Z4424
Z4425
Z4426
Z4427
Z4428
Z4429
G0031
Z4430
Z4431
Z4432
Z4433
Z4434
8.5-9
8.5-10
8.5-11
8.5-12
8.5-13
8.5-14
8.5-15
8.5-16
8.5-17
8.5-18
8.5-19
8.5-20
8.5-21
8.5-22
8.5-23
8.5-24
8.5-25
8.5-26
8.5-27
8.5-28
8.5-28
8.5-28
8.5-29
8.5-30
8.5-31
8.5-32
8.5-32
8.5-33
8.5-34
8.5-35
8.5-36
8.5-37
8.5-38
8.5-39
8.5-40
8.5-41
8.5-42
8.5-43
8.5-44
8.5-45
8.5-46
8.5-47
8.5-48
8.5-49
8.5-50
SNA
SA
SA
SA
SA
SA
SA
SA
SA
Z4435
Z4436
Z4437
Z4438
Z4439
Z4440
W0004
G0010
SNA
SNA
SA
Z4441
SNA
SA
SA
Z4442
Z4443
SNA
SA
SA
Z4444
Z4357
Z4445
SCREW-MACHINE;BH,+,M3,L6,ZPC(WHT),SWRCH1
SCREW-MACHINE;PH,+,M2.6,L4,ZPC(YEL),SWRC
LATCH-M-HUB CLUTCH;CLP-300,POM,T2.0,D18.
GEAR-FUSER RDCN OUT V;ML-3560,HTNFR52G30
RING-E;ID5.0,OD11.0,T0.6,PASS,STS304
SA
SNA
SNA
SNA
SA
SA
SA
SA
SA
SA
R0006
Z4446
Z4447
M0024
Z4448
Z4449
SHAFT-M-T2 CAM;CLP-300,POM,L52,D20,BLACK
SHAFT-M-ITB CLEAN CAM;CLP-300,POM,L44,D2
MOTOR DC-DEVE DRIVE;50M843A152,CLP-600,2
SOLENOID-PICK UP;-,CLP-300,DC24V,48§Ù¡¾1 S
SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(YEL),SW
BRACKET-M-DEVE CAM;CLP-300,PC+ABS,T2.5,W
SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRC
CAP-M-PUSH COUPLING;CLP-300,POM,T2.0,D13
MEA UNIT-CLUTCH DEV;CLP-300,-,WORLD,M0.6
SHAFT-M-DEVE CAM;CLP-300,POM,L116,D18.3,
PBA SUB-DEVE_HOME;CLP-300,SEC,KOREA,DEVE
HOLDER-M-LINK BLACK;CLP-300,PC+ABS,T2.5,
LINK-M-PUSH BLACK CAP;CLP-300,POM,22,T2.
BUSH-D6/L4;CLP-500,BRONZE+ST,ID6.0,OD9.0
CABLE CLAMP;DAWS-3NE,ID11*L34.8,-,NYLON6
SNA
SA
SA
SA
SA
SA
SA
SA
SA
Z4397
Z4450
Z4451
Z4452
Z4453
Z4454
Z4455
B0027
C0002
SA
2
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.5-50
SEC-Code
Description & Specification
Location Service
6502-000121
0205-001003
0205-001059
0205-001144
0205-001080
0205-001095
JF68-10532B
JC66-01133A
6044-000125
6107-001282
JC39-00302A
JC61-01486A
JC63-00854A
JC39-00493A
JC39-00497A
6107-001163
JC39-00498A
JC39-00578A
JC61-00829B
JC66-01149A
JC39-00579A
JC39-00581A
JC39-00583A
JC66-01040A
JC61-01546A
JC47-00009C
JC47-00014A
JC61-01566A
JC61-01443A
JC61-01451A
JC61-01478A
JC61-01482A
JC61-01483A
JC61-01484A
JC61-01485A
JC61-01489A
JC61-01537A
JC61-01547A
JC61-01548A
JC61-40001A
JC61-70940A
JC66-00050A
JC66-00346A
JC66-01056A
JC66-01120A
JC66-01128A
JC66-01207A
JC70-00050A
JC72-00102A
JC92-01714A
JC92-01723A
JC92-01718A
6006-000127
6021-000222
JC70-10961A
JC72-41010A
JC97-02362A
CABLE CLAMP;DAMC-101,D7~8,L19,SCP-1,NTR
GREASE-BEARING;NYOGEL788,DAMPING GREASE,
GREASE-BEARING;PETAMO GHV 133,BEIGE,15KG
GREASE-BEARING;SF-112,HANARL,NOISE TAMPI
GREASE-BEARING;NYOGEL 774H,NOISE DAMPING
GREASE-BEARING;NYE8512,NOISE DAMPING(BLU
LABEL(P)-BAR CODE;CLP-500,-,YUPO PAPER,1
LEVER-M-ACTUATOR FEED;CLP-300,POM,T2.5,3
RING-E;ID4,OD9,T0.6,PASS,STSC
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
8.5-51
8.5-51
8.5-51
8.5-51
8.5-51
8.5-52
8.6-27
8.6-65
8.6-11
8.6-34
8.6-34
8.6-35
8.6-35
8.6-54
8.6-37
8.6-37
8.6-38
8.6-38
8.6-39
8.6-39
8.6-47
8.6-41
8.6-41
8.6-55
8.6-55
8.6-58
8.6-58
8.6-1
R0004
Z4456
C0007
SA
SA
SA
SPRING-CS;C5210W,-,PI0.6,-,L12.5,-,-,ID3
CBF HARNESS-100M_GND;CLP-500,-,-,1 PIN,5
PLATE-P-GROUND PICKUP;CLP-300,C5210P,T0.
COVER-M-GROUND OPC;CLP-300,ABS HB,T1.5,
CBF HARNESS-THER;CLP-300,WIRE HARNESS,UL
CBF HARNESS-INLET;CLP-300,WIRE HARNESS,U
SPRING-CS;SUS304-WPB,-,PI0.4,D3.9,L13,-,
CBF HARNESS-COVER S/W;CLP-300,WIRE HARNE
CBF HARNESS-GND_BRK;CLP-300,WIRE HARNESS
HOLDER-BEARING EXIT F/DOWN;CLP-300,POM(A
ROLLER-EXIT MAIN;CLP-300,PFA,D8.5,L23,BL
CBF HARNESS-LSU_S/W;CLP-300,WIRE HARNESS
CBF HARNESS-FUSER_AC;CLP-300,WIRE HARNES
HARNESS-GND_FRAME;CLP-300,WIRE HARNESS,U
ROLLER-EXIT F DOWN;CLP-300,SUM22/EPDM,D4
SPRING ETC-OPC LOCK L;CLP-300,C5210W,D1.
MEP-CLUTCH REGI;-,CLP-300,3.0W,DC24V,125
MEP-CLUTCH CAM;-,CLP-300,-,DC24V,0.18A,C
HOLDER-M-CLUTCH FUSER;CLP-300,PC+ABS,T2.
FRAME-M BASE GOGH;CLP-300,PC+ABS,NH-1000
PLATE-P-GROUND OPC L;CLP-300,C5210P,T0.2
GUIDE-M-HARNESS;CLP-300,ABS,HB,T2.5,118.
PLATE-P-GROUND FUSER;CLP-300,SUS304-CSP,
PLATE-P-GROUND LSU;CLP-300,C5210P,T0.2,1
PLATE-P-GROUND T2;CLP-300,C5210P,T0.2,21
PLATE-P-GROUND REGI;CLP-300,SUS304 CSP,T
PLATE-P-GROUND EXIT;CLP-300,SUS 304 CSP,
PLATE-P-SHAFT LACK;CLP-300,SECC,T1.0,4,1
SPRING ETC-OPC LOCK R;CLP-300,C5210W,D1.
HOLDER-M-CAM;CLP-300,POM (DE8903),T2.0,1
FOOT-ML80;ML-80,NBR,-,GRAY,-,-,-
SNA
SNA
SA
SA
SA
SA
SA
SA
SA
Z4457
Z4458
Z4460
Z4459
Z4461
Z4462
Z4464
Z4463
Z4465
Z4466
SA
SA
SA
SNA
SA
SA
Z4468
Z4467
Z4469
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
8.6-33
8.6-59
8.6-18
8.6-13
8.6-16
8.6-14
8.6-19
8.6-17
8.6-15
8.6-57
8.6-2
Z4470
SNA
SA
SA
SA
SA
F0003
O1054
C0004
G0340
Z4471
8.6-60
8.6-3
SPRING ETC-TR(12);ML-5500,-,4.5,-,12.7,1
CAM-CATCH;ML-9400W,POM,-,34¡¿18¡¿7,WHITE S
GEAR-MP/DUP DRV;SCX-5100,POM,SW-01,M0.8,
GEAR-REGI DRIVE;CLP-300,POM,M0.8,Z32,-,W
SHAFT-FEED IDLE;CLP-300,SUM22+NI,L237,D8
ROLLER-REGI;CLP-300,SUM22+EPDM,D6.0/D14.
SHAFT-M-CLUTCH FUSER;CLP-300,POM,L39.8,D
IPR-TERMINAL;SF-5100,SWRCH1018,-,-,-,-,8
PMO-BUSHING_TR(L);SF-5100,POM (CH-15),BL
PBA SUB-PANEL;CLP-300,SEC,KOREA,PANEL,-,
PBA SUB-WASTE_T;CLP-300,SEC,KOREA,WASTE_
PBA SUB-EXIT;CLP-300,SEC,KOREA,EXIT SENS
SCREW-MACHINE;WS,PH,+,M3,L6,ZPC(YEL),SWR
NUT-HEXAGON;2C,M3,ZPC(YEL),SM20C,-
8.6-12
8.6-10
8.6-62
8.6-64
8.6-67
8.6-68
8.6-61
8.6-20
8.6-32
8.6-72
8.6-49
8.6-75
8.6-46
8.6-45
8.6-78
SA
SNA
SNA
SA
Z4472
SNA
SA
SA
SA
SA
O1101
Z4473
Z4474
Z4475
SNA
SNA
SA
SA
SA
IPR-TERMINAL FU;ML-165,C5210P,-,T0.3,-,-
PMO-HOUSING TERMINAL;ML-165,ABS GF10%,BL
MEA UNIT-DRAW;CLP-300,SEC,WORLD,-,-,-,-
K3422
H6086
Z4476
3
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.6-79
8.6-5
SEC-Code
Description & Specification
Location Service
SNA
6009-001396
JC39-00488A
JC61-01521A
JC61-00018A
JC61-01480A
JC72-00463A
JC72-00465A
JC61-01477A
JC61-01568A
JC66-00810A
6107-001167
JC61-01151A
JC61-01173A
JC61-01473A
JC61-01533A
JC61-01538A
JC61-01570A
JC61-70911A
JC66-00815A
JC66-01076A
JC66-01077A
JC66-01080A
JC66-01105A
JC69-00961A
JC73-00211A
JB61-00076A
JC61-01481A
JC66-01119A
JC67-00168A
JC64-00267A
JC63-00839A
6107-001295
JC63-01093A
JC62-00338A
JC61-01474A
JC61-01475A
JC66-01078A
JC66-00669A
JC66-10902A
JC72-00814A
4712-001027
JC66-01079A
JC66-01111A
JC61-01490A
JC61-01491A
JC61-01534A
JC61-01535A
JC61-01522A
JC66-01110A
JC61-01476A
JC70-00518A
JC70-00519A
JC68-00407A
JC68-01134A
JC68-01581A
6107-001246
6107-001267
SCREW-SPECIAL;PH,+,-,M3,L10.3,ZPC(BLK),S
CBF HARNESS-MAIN_DRAW;CLP-300,WIRE HARNE
PLATE-P-DRAW CONNECTOR;CLP-300,SECC,T1.0
SPRING ETC-SENSOR;SF-5100,SUS304WPB,0.2,
HOLDER-M-ACTUATOR FEED;CLP-300,ABS,T2.5,
PMO-CAP CONNECTOR L;ML-6060A,POM,BLACK,-
PMO-CAP CONNECTOR U;ML-6060A,POM,BLACK,-
FRAME-M-EXIT;CLP-300,PC,NH-1035,5V,BLACK
HOLDER-M-EXIT F DOWN;CLP-300,PC,T2.5,26.
GEAR-EXIT_DRV17;ML-1610,POM,0.8,17,-,BLK
SPRING-CS;SUS304-WPB,-,PI0.25,D3.25,L9.6
HOUSING-M-PICK_U;ML-1610,POM,-,-,35,NATU
HOUSING-M-PICK_UP B;ML-1610,ABS HB,-,-,3
GUIDE-M-PICK UP;CLP-300,PC+ABS,HB,T2.5,5
PLATE-P-PICK UP;CLP-300,SECC,T1.0,264,43
HOLDER-M-PAD;CLP-300,PC+ABS,HB,T2.5,-,-,
GUIDE-M-PAPER;CLP-300,POM M90-44,T2.0,15
SPRING ETC-EXIT ROLL FD;ML-165,SUS304 WP
LEVER-M-KICKER P/U;ML-1610,POM,-,10.5,31
GEAR-PICK UP A;CLP-300,POM,M0.8,Z45,-,WH
GEAR-PICK UP B;CLP-300,POM,M0.8,Z45,-,WH
SHAFT-P-PICKUP;CLP-300,SECC,L286,T1.2,-,
CAM-M-PICK UP;CLP-300,POM M90-44,-,-,WHI
PAD-FRICTION;CLP-300,NBB,T1.0,W9.0,L39.5
RUBBER-PICK_UP;ML-1610,EPDM+IR,MM,-,-,-,
SPRING ETC-TORSION DOC (CC2-F);SCX-1110F
HOLDER-M-ACTUATOR EMPTY;CLP-300,ABS,T2.5
LEVER-M-ACTUATOR EMPTY;CLP-300,PC,T2.5,5
BRUSH-LSU;CLP-300,PP BRUSH,-,W4.5,L180.6
SHUTTER-LSU;CLP-300,ABS GF20,T2.5,W11.5,
COVER-M-LSU;CLP-300,ABS HB,T2.0,239.5,1
SPRING-CS;SUS304,-,PI0.45,D5.45,L22.5,-,
SHEET-LSU FRONT;CLP-300,PET SHEET,T0.188
SEAL-COVER LSU;CLP-300,EPDM,-,T2.5,W8,L1
FRAME-M-UPPER FUSER;CLP-300,PET+GF30%,BN
FRAME-M-LOWER FUSER;CLP-300,PET+GF30%,BN
ROLLER-HEAT;CLP-300,AL5052+RUBBER,D27.5,
GEAR-FUSER;SCX-5315F,PPS, OFL4036,1,34,P
BEARING-H/R L;ML-165,PPS(RBA313N),-,ID26
PMO-BEARING H/R-F;SCX-5100,-,PPS,BLK,V0,
THERMOSTAT;125/250VAC,15/7.5A,170+-5C,0C
ROLLER-PRESSURE;CLP-300,SUM22,D16,L237.5
ROLLER-PRESSURE SHAFT;CLP-300,SUM22,D8.0
HOLDER-M-BUSH 2PR_R;CLP-300,PBT,T2.0,33.
HOLDER-M-BUSH 2PR_L;CLP-300,PBT,T2.0,33.
BUSH-M-2PR L;CLP-300,PPS(RBA313N),-,-,5.
BUSH-M-2PR R;CLP-300,PPS(RBA313N),-,5.3,
GUIDE-M-INPUT FUSER;CLP-300,PET+GF30%,5V
LEVER-M-ACTUATOR EXIT;CLP-300,PET+GF30%,
PLATE-P-GROUND FUSER;CLP-300,SUS 304 CSP
ELECTRODE-P-AC R;CLP-300,C5210P T0.8,D3.
ELECTRODE-P-AC L;CLP-300,C5210P T0.8,D3.
LABEL(R)-HV FUSER;ML-6060,PVC,-,220V,-,,
LABEL(P)-BLANK(FUSER);ML-1710D3,-,WHITE
LABEL(P)-CAUTION HOT;COMMON,SAMSUNG,PET,
SPRING-CS;SWP-B,-,PI0.9,D5.6,L16.6,-,-,I
Z4477
SA
SNA
SNA
SNA
SA
8.6-4
8.6-26
8.6-28
8.6-87
8.6-88
8.6-36
8.6-42
8.6-44
8.6-100
8.6-101
8.6-102
8.6-103
8.6-104
8.6-105
8.6-106
8.6-107
8.6-108
8.6-109
8.6-110
8.6-111
8.6-112
8.6-113
8.6-114
8.6-23
8.6-25
8.6-24
8.7-1
8.7-2
8.7-3
8.7-4
8.7-5
8.7-6
8.8-1
8.8-2
8.8-3
8.8-4
8.8-5
8.8-6
8.8-7
8.8-8
8.8-9
Z0013
Z0014
SA
SNA
SNA
SA
SA
SA
O1073
Z4318
P2067
P2068
SA
SNA
SNA
SNA
SNA
SA
SNA
SA
SA
O1053
R1120
Z4478
Z4479
SNA
SNA
SA
SA
SA
Z4480
P2148
O1013
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
Z4481
B1019
B1040
T0002
SA
SA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
8.8-10
8.8-11
8.8-12
8.8-13
8.8-14
8.8-15
8.8-16
8.8-17
8.8-18
8.8-19
8.8-20
8.8-21
8.8-22
8.8-23
L0006
Z4482
SPRING-CS;SWP-B,-,PI1.0,D5.9,L17,-,-,ID4
4
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.8-24
SEC-Code
Description & Specification
Location Service
JC39-00500A
JC39-00501A
6003-000261
4713-001210
1404-001368
JC70-00064A
JC72-20902A
JC72-00382A
JC66-01206A
JC61-01647A
JC66-01147A
JC66-01148A
JC61-01523A
JC61-01271A
JC97-02778A
6107-001290
JC66-01309A
JC61-01685A
JC61-01679A
6006-001078
JC39-00499A
JC63-01142A
JC67-00199A
JC68-01708A
JC68-01766A
JC68-10914D
JC69-01013A
JC96-03911A
JC97-02571A
JC97-02613A
JC97-02614A
JC97-02615A
JC97-02616A
JC97-02619A
0604-001257
0604-001154
6003-000282
6031-000019
6107-001287
6107-001288
6107-001289
JC02-00054A
JC39-00489A
JC39-00502A
JC61-01494A
JC61-01495A
JC61-01497A
JC61-01498A
JC61-01499A
JC61-01502A
JC61-01503A
JC61-01504A
JC61-01505A
JC61-01506A
JC61-01536A
JC61-01539A
JC61-01540A
CBF HARNESS-FUSE_LINK1;CLP-300,WIRE HARN
CBF HARNESS-FUSE_LINK2;CLP-300,WIRE HARN
SCREW-TAPTITE;BH,+,B,M3,L6,ZPC(YEL),SWRC
LAMP-HALOGEN;230V,-,850W,-,-,-,8x299.5mm
THERMISTOR-NTC ASSY;1KOHM,-,4537K,0.25MW
IPR-PIN ROLLER EXIT;SF-5100,SUS304,PI1.8
PEX-ROLLER F/UP(2);ML-5000A,TEFLON,WHT,-
PMO-BUSHING TX;ML-6060A,POM M9044,BLK,-,
SHAFT-M-CAM FUSER;CLP-300,PC+GF30%,L252.
HOLDER-M-SHAFT FUSER;CLP-300,PC,T2.0,-,L
LEVER-M-RELEASE;CLP-300,PET+GF30%,T1.5,W
LEVER-M-LINK FUSER;CLP-300,PET+GF30%,T1.
GUIDE-M-OUTPUT FUSER;CLP-300,PET+GF30%,5
SPRING ETC-ACTUATOR;CLP-600,SUS304 ,0.35
MEA UNIT-GUIDE PR;CLP-300,SEC,EXPORT,-,-
SPRING-CS;SUS304 WPB,-,PI0.55,D5.55,L16,
ROLLER-DUMMY;CLP-300,PFA,OD6.0,L10.0,-,-
SPRING ETC-DUMMY;CLP-600,SUS,0.5,-,-,20.
SPRING ETC-GROUND;CLP-300,SUS 304 WPB,¥Õ
SCREW-TAPTITE;WSP,PH,+,M3,L10,ZPC(YEL),S
CBF HARNESS-JOIN_DRAW;CLP-300,WIRE HARNE
SHEET-FILM YELLOW UP;CLP-300,PC,T0.38,W5
CAP-DEVE;CLP-300,PP,-,31.5,62,-,-
LABEL-INFORMATION;CLP-300,-,WHITE POLY,T
LABEL-INFORMATION;CLP-300,DSL,YUPO,0.08,
LABEL(P)-SERIAL NO;ML-85,ART,70X15,G100,
CUSHION-DEVE;CLP-300,EPP,T10,W75,L351,-,
ELA UNIT-DEV MAIN SET;CLP-300,SEC,EXPORT
MEA UNIT-OPC SET;CLP-300,SEC,WORLD,-,-,-
MEA UNIT-DEV Y;CLP-300,SEC,EXPORT,-,-,-,
MEA UNIT-DEV M;CLP-300,SEC,EXPORT,-,-,-,
MEA UNIT-DEV C;CLP-300,SEC,EXPORT,-,-,-,
MEA UNIT-DEV K;CLP-300,SEC,EXPORT,-,-,-,
MEA UNIT-TONER WASTE;CLP-300,SEC,EXPORT,
PHOTO-INTERRUPTER;TR,-,-,DIP-4,BK
PHOTO-INTERRUPTER;TR,0.2-1.0MA,80MW,DIP,
SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SW
WASHER-PLAIN;-,ID6.1,OD8.5,T0.1,BLK,POLY
SPRING-CS;SUS304-WPB,-,PI0.6,D6.5,L25,-,
SPRING-CS;SUS304-WPB,-,PI0.35,D3.55,L12,
SPRING-CS;SUS304-WPB,-,PI0.95,-,L21.2,-,
TONER-BLACK;CLP-300,SAK-79JG-K1,BLACK,8.
CBF HARNESS-ITB_JOINT;CLP-300,WIRE HARNE
CBF HARNESS-ITB_HOME;CLP-300,WIRE HARNES
FRAME-M-ITB;CLP-300,ABS+GF20%,GR-4020,-,
FRAME-M-WASTE ITB;CLP-300,ABS GF20%,GR-4
HOUSING-M-CLEANING ITB;CLP-300,ABS GF 20
HOLDER-M-BUSH CHARGE;CLP-300,POM(M90-44)
GUIDE-M-POLE ITB;CLP-300,ABS HF-0660I,-,
BRACKET-P-HOUSING LEFT;CLP-300,SECC,1.2T
BRACKET-P-HOUSING RIGHT;CLP-300,SECC,1.2
PLATE-P-GND ITB;CLP-300,BRONZE(C5210P-H)
HOLDER-M-PTL;CLP-300,ABS HB HF-0660I,10.
HOLDER-M-HOME SENSOR;CLP-300,ABS HB(HF-0
BUSH-M-CHARGE CLEANING;CLP-300,POM(M90-4
BUSH-M-DRIVE ITB;CLP-300,POM(M90-44),ID6
BUSH-M-ITB;CLP-300,POM(M90-44),ID6,OD8.1
Z4483
Z4484
SA
SA
8.8-25
8.8-27
8.8-28
8.8-29
8.8-30
8.8-31
8.8-32
8.8-33
8.8-34
8.8-35
8.8-36
8.8-37
8.8-38
8.8-39
8.8-40
8.8-41
8.8-42
8.8-43
8.9-2
SNA
SA
SA
Z4485
Z4486
SNA
SA
O1106
SNA
SNA
SNA
SNA
SA
SNA
SA
SNA
SA
Z4487
S0018
Z4488
SNA
SA
SA
Z4489
Z4490
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
8.9-4
8.9-5
8.9-6
8.9-7
8.9-7
8.9-8
8.9-9
8.9-10
8.9-11
8.9-12
8.9-13
8.9-14
8.9-15
8.9-16
8.10-4
8.10-4
8.10-5
8.10-6
8.10-7
8.10-8
8.10-9
8.10-10
8.10-11
8.10-12
8.10-14
8.10-15
8.10-16
8.10-17
8.10-18
8.10-19
8.10-20
8.10-21
8.10-22
8.10-23
8.10-24
8.10-25
8.10-26
P0012
Z4491
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
5
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
8.10-27
SEC-Code
Description & Specification
Location Service
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
JC61-01541A
JC61-01542A
JC61-01543A
JC61-01701A
JC61-01704A
JC62-00210A
JC62-00212A
JC62-00213A
JC62-00217A
JC62-00219A
JC62-00221A
JC62-00222A
JC62-00223A
JC62-00229A
JC62-00232A
JC62-00257A
JC62-00258A
JC62-00281A
JC62-00282A
JC62-00326A
JC63-00857A
JC63-00859A
JC63-00862A
JC63-01045A
JC63-01124A
JC63-01170A
JC66-01082A
JC66-01083A
JC66-01085A
JC66-01087A
JC66-01112A
JC66-01131A
JC67-00027A
JC72-40332A
JC73-00222A
JC92-01709A
JC92-01724A
JC97-02645A
JC97-02646A
JC97-02695A
JC61-01530A
JG61-70531A
JC64-00222A
JC64-00223A
JC97-02218A
6107-001240
JC70-00516A
JC70-00517A
JG66-40003A
JC63-00869A
JC63-00855A
JC68-01679A
JC68-01680A
JC61-01531A
JC61-01572A
JC62-00227A
JC62-00237A
BUSH-M-TR ITB;CLP-300,POM(AT-15CF),ID6,-
BUSH-M-IDLER WASTE BELT;CLP-300,POM(M90-
BUSH-CHARGE LEFT;CLP-300,SINTERED BRONZE
SPRING ETC-SHUTTER;CLP-300,SWP-B,¡Ë0.35,S
SPRING ETC-GROUND ITB;CLP-300,SUS304-WPB
SEAL-AUGER OPC;CLP-300,PORON LE-20,-,5T,
SEAL-BELT ITB;CLP-300,URETHANE FILM,-,0.
SEAL-LOW ITB;CLP-300,POLYURETHANE,-,6T,W
SEAL-COVER WASTE;CLP-300,PORON,-,T2,W11.
SEAL-BACK ITB;CLP-300,POLYURETHANE FOAM,
SEAL-BACK ITB RIGHT;CLP-300,POLYURETHANE
SEAL-SIDE ITB LEFT;CLP-300,POLYURETHANE
SEAL-SIDE ITB RIGHT;CLP-300,POLYURETHANE
SEAL-BLADE ITB LEFT;CLP-300,POLYURETHANE
SEAL-TOP ITB;CLP-300,POLYURETHANE,-,10T,
SEAL-FRAME WASTE ITB;CLP-300,PORON LE-20
SEAL-WASTE OPC;CLP-300,PORON LE-20,-,T0.
SEAL-HOUSING ITB L;CLP-300,PORON LE-20,B
SEAL-HOUSING ITB R;CLP-300,PORON LE-20,B
SEAL-WASTE SIDE;CLP-300,POLY URETHANE FO
COVER-M-WASTE ITB;CLP-300,PC,2.0T,W49.4,
COVER-M-WASTE EXIT;CLP-300,POM(M90-44),T
COVER-M-HANDLE ITB;CLP-300,ABS HF-0660I,
SHEET-FRAME ITB;CLP-300,PC,T0.125,W80.5,
SHEET-HOUSING ITB F;CLP-300,PET,T0.188,W
SHEET-BLADE ITB;CLP-300,PC,T0.5,5,222.5,
ARM-M-BLADE ITB;CLP-300,PC,T5.0,53,L71,B
SHAFT-M-BELT WASTE;CLP-300,POM(M90-44),L
SHAFT-M-AUGER ITB;CLP-300,ABS+GF20%,253,
GEAR-AUGER ITB;CLP-300,POM (M90-44),M0.8
DRUM-ITB BELT;CLP-300,PI,OD120,W240,L376
ROLLER-T1;CLP-300,NBR + ECO FORM,OD14,L2
LENS-PTL;ML-1710,PMMA,NTR,-,-,-,-
PMO-BUSHING_CHARGE;ML-80,POM,BLK,HB,-
RUBBER-BELT WASTE ITB;CLP-300,CR+NR20%,1
PBA SUB-ITB_JOINT;CLP-300,SEC,KOREA,ITB-
PBA SUB-PTL;CLP-300,SEC,KOREA,PTL,-,-,-,
MEA UNIT-BLADE ITB;CLP-300,SEC,EXPORT,-,
MEA UNIT-ROLL DRV ITB;CLP-300,SEC,EXPORT
MEA UNIT-ROLL IDL ITB;CLP-300,SEC,WORLD,
FRAME-M-SEMI CASSETTE;CLP-300,ABS,HF-066
SPRING ETC-LOCKER,PLATE;SF6000,STS304WPB
LOCKER-M-KNOCK UP R;CLP-300,POM (M90-44)
LOCKER-M-KNOCK UP L;CLP-300,POM (M90-44)
MEA UNIT-PLATE KNOCK_UP;ML-1610,SAMSUNG,
SPRING-CS;SUS304-WPB,GROUND END,PI0.6,D1
ADJUST-M-CASSETTE R;CLP-300,ABS HB,T2.5,
ADJUST-M-CASSETTE L;CLP-300,ABS HB,T2.5,
GEAR-PINION;SF4000,POM,WHT,M1,Z16
8.10-28
8.10-29
8.10-30
8.10-31
8.10-32
8.10-33
8.10-34
8.10-35
8.10-36
8.10-37
8.10-38
8.10-39
8.10-40
8.10-41
8.10-42
8.10-43
8.10-44
8.10-45
8.10-46
8.10-47
8.10-48
8.10-49
8.10-50
8.10-52
8.10-53
8.10-54
8.10-55
8.10-56
8.10-57
8.10-58
8.10-59
8.10-60
8.10-62
8.10-63
8.10-64
8.10-71
8.10-75
8.10-81
8.10-85
8.11-1
K3433
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
SA
SA
SA
SA
SA
SA
SA
8.11-2
8.11-3
8.11-4
8.11-5
8.11-6
8.11-7
8.11-8
8.11-9
8.11-13
8.11-14
8.11-16
8.11-17
S0025
Z4492
Z4493
K3602
D4084
Z4494
Z4495
O1127
TRAY-M-EXTENSION SMALL;CLP-300,ABS,T2.5,
COVER-M-CASSETTE;CLP-300,ABS,T2.5,77,224
LABEL-INSTRUCTION;CLP-300,-,WHITE PET,T0
LABEL-INSTRUCTION;CLP-300,-,WHITE PET,T0
STOPPER-M-PAPER REAR;CLP-300,ABS HB,T2.5
HOLDER-M-SHAFT CLUTCH;CLP-300,POM,T1.5,D
SEAL-SHUTTER BOTTLE;CLP-300,POLYURETHANE
SEAL-AGITATOR BOTTLE;CLP-300,PORON,BLACK
SNA
SNA
SNA
SNA
SNA
SA
#N/A
#N/A
#N/A
#N/A
SNA
SNA
6
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
Description & Specification
SOCKET-IC;8P,DIP,SN,2.54MM
Location Service
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
3704-000349
JC62-00259A
JC63-00864A
JC63-00872A
JC63-01110A
JC64-00218A
JC66-01095A
JC66-01139A
JC66-01144A
JC67-00135A
JC92-01711A
JC92-01712A
JC92-01713A
JC96-04001A
JC97-02688A
6601-001384
6902-000288
JC68-01765A
0201-001235
JC99-01896A
JC64-00260C
JC99-01897B
JC64-00260D
JC99-01898J
0202-001240
JC63-00894A
0202-001459
JC68-01564B
JC92-01707B
JC64-00260A
JC66-01049A
JC39-00484A
JC39-00485A
JC67-00135B
6902-000775
0201-001162
JC61-01466A
JC61-01468A
JC61-01677A
JC66-01084A
JC66-01086A
JC66-01088A
JC66-01113A
JC69-01016A
JC74-00011A
JC39-00487A
JC66-01124A
JC61-01500A
JC61-01496A
JC39-00486A
JC39-00580A
JC61-01493A
JC66-01299A
JC61-01529A
JC66-01074A
JC61-01669A
JC66-01069A
SEAL-BOTTLE AUGER;CLP-300,PORON LE-20,-,
SHIELD-P-SMPS;CLP-300,SECC,T1.0,109.7,19
TRAY-M-EXT CASSETTE;CLP-300,ABS,T2.5,118
SHEET-BRACKET ITB;CLP-300,PET FILM,T0.18
SHUTTER-M-TONER BOTTLE;CLP-300,POM HB,-,
GEAR-AGITATOR BOTTLE;CLP-300,POM(DE8903)
GEAR-AUGER A;CLP-300,POM,M0.6,Z89,T4.1,B
SHAFT-AUGER;CLP-300,POM,L67,OD16,BLACK,-
CAP-M-TONER BOTTLE;CLP-300,ABS HB,-,PI59
PBA SUB-CRUM_M;CLP-300,SEC,KOREA,CRUM_M,
PBA SUB-CRUM_C;CLP-300,SEC,KOREA,CRUM_C,
PBA SUB-CRUM_K;CLP-300,SEC,KOREA,CRUM_K,
ELA UNIT-CONNECTOR;CLP-300,SEC,EXPORT,-,
MEA UNIT-PICK UP GEAR;CLP-300,SEC,WORLD,
BEARING-BALL;676ZZ,ID6,OD10,L3,GCr 15 +
BAG PE;LDPE,T0.05,W250,L450,TRP,8,2-
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
LABEL-POP;CLP-300,DSH,YUPO,0.08,360,154,
ADHESIVE-TS;DEH-390D,RED,400,-
PAA MAIN-PACKING;CLP-300,SAMSUNG,EXPORT,
HANDLE-BOTTLE M;CLP-300,ABS,T5.4,-,L43.6
PAA WOOD-LABEL(SEE);CLP-300/SEE,EU,GOGH,
HANDLE-BOTTLE C;CLP-300,ABS,T5.4,-,L43.6
INA-ACCESSORY;CLP-300/XSG,SAMSUNG,-,GOGH
SOLDER-WIRE;HSE-01,-,D3,SN/0.5CU/0.03NI/
COVER-INNER;CLP-300,ABS,T2.0,PI 56,-,HB,
SOLDER-CREAM;S3X58-M405,-,D20~38§-,96.5SS
MANUAL-INSTALL;CLP-300,SEC,10 ,GOGH,M150
PBA MAIN-GOGH_NET;CLP-300,SEC,KOREA,GDI,
HANDLE-M-BOTTLE;CLP-300,ABS,T5.9,W32.3,L
GEAR-OPC DRIVE;CLP-300,POM,M0.6/M0.6,Z53
CBF HARNESS-SMPS;CLP-300,WIRE HARNESS,UL
CBF HARNESS-HVPS;CLP-300,WIRE HARNESS,UL
CAP-TONER BOTTLE C;CLP-300,ABS HB,T10.87
BAG PE;HDPE,T0.015,W1000,L900,TRP,28,0,
ADHESIVE-CYA;LOCTITE403,NTR,1250,20G
FRAME-M-T2 BASE;CLP-300,PC+ABS,-,HB,BLAC
GUIDE-P-T2 OUTPUT;CLP-300,SECC,T0.6,-,22
SPRING ETC-RETURN;CLP-300,SUS304,¡Ë0.65,S
SHAFT-M-AUGER OPC;CLP-300,ABS+GF20%,L250
GEAR-DRUM OPC;CLP-300,PC(LF1025),M0.6,Z9
SHAFT-OPC;CLP-300,SUS303,L284.5,OD6,-,-,
GEAR-IDLE M08Z30R;CLP-300,POM (M90-44),M
CUSHION-CASSETTE IN;CLP-300,HONEY PAD,T3
MPR-PAD KNOCK UP MP;ML-6060A,CR+CORK,10*
CBF HARNESS-OPE;CLP-300,WIRE HARNESS,UL1
GEAR-IDLE OPC;CLP-300,POM (M90-44),M0.6/
BRACKET-P-CLEANING ITB;CLP-300,SECC,1.6T
HOUSING-M-CLEANING OPC;CLP-300,ABS GF 20
CBF HARNESS-BLDC;CLP-300,WIRE HARNESS,UL
CBF HARNESS-DEVE_HOME;CLP-300,WIRE HARNE
FRAME-M-RIGHT OPC;CLP-300,ABS+GF20%,-,-,
SHAFT-AUGER SUPPLY M;CLP-300,ABS GF20% G
HOLDER-M-CRUM;CLP-300,ABS(XR-409),T2.0,W
LEVER-M-RELEASE R;CLP-300,ABS+GF20%,T2.0
GUIDE-M-SENSOR L;CLP-300,PS,T10.29,W11.7
GEAR-CLUTCH DEVE CAM;CLP-300,POM,M0.6,Z2
SNA
SA
SA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
O1109
SA
SA
SNA
SNA
SNA
SA
SA
SNA
SNA
SNA
SNA
SNA
SA
7
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
Description & Specification
Location Service
SNA
JC73-00220A
JC72-00382B
JC46-00257A
JC39-00494A
JC61-01675A
JC61-01676A
JC72-01384A
JC66-01140A
JC66-01141A
JC66-01301A
JC70-50901A
JC94-01153A
JC72-41105A
JC66-00720A
JC63-00897A
JC33-00018A
JC64-00229A
JC68-01245A
3711-000198
JC92-01710A
JC72-01389A
JC61-01777A
JC67-00134A
JC97-01401A
JC97-02638A
JC97-02639A
JC97-02640A
JC97-02641A
JC68-01154A
JC68-01825A
JC69-01014A
JC63-00845A
JC69-00919B
JC96-03590A
0202-001492
0203-000007
0203-001100
0203-001159
0204-000469
0204-002978
0205-001214
1103-001273
2801-003886
3711-000164
3711-000203
3711-002410
3711-003035
3711-003204
3711-003340
3711-003408
3722-002303
6902-000732
6902-000734
JB68-00073A
JB68-00916A
JC02-00052A
JC02-00053A
RUBBER-BELT BLACK;CLP-300,NBR,0.7T,-,22,
PMO-BUSHING FEED;ML-1710,POM(DERLIN 8903
S/W APPLICATION-CD;-,CLP-300,PRT DRV,1.0
CBF HARNESS-REGI_EMT;CLP-300,WIRE HARNES
SPRING ETC-AUGER;CLP-300,SUS304,¡Ë1.2,-,S
SPRING ETC-AUGER K;CLP-300,SWP-B,¡Ë1.2,IS
SPONGE-CAP BOTTLE;CLP-300,POLYURETHANE F
GEAR-AUGER B;CLP-300,POM,M0.6,Z56,T4.1,W
GEAR-AUGER Z15;CLP-300,POM,M0.6,Z15,T3.5
LEVER-COVER OPEN;CLP-300,PET+GF30,2.0,24
IPR-IPM BUSHING DEV R;ML-5000,BRONZE,-,D
PHANTOM AU JC92-01707B
PMO-BUSHING DEV;ML-5000,POM,NTR,-,-,-,-,
SHAFT-P-CORE;ML-1750,SECC 1.2T,203,-,-,-
COVER-M-WIRE;CLP-300,ABS,T2.0,W18.9,L133
SOLENOID-TONER;-,CLP-300,DC24V,120§Ù¡¾10SN
HANDLE-LOCK;CLP-300,ABS,T34.26,W39.3,L83
MANUAL-WARRANTY CARD;COMMON,XSG,ARABIC,U
HEADER-BOARD TO CABLE;1WALL,3P,1R,2.5MM,
PBA SUB-CRUM_Y;CLP-300,SEC,KOREA,CRUM_Y,
SPONGE-CRUM;CLP-300,PORON,-,T2,W8,L12,-,
HOLDER-BLADE ITB;CLP-300,PC,-,W10,L17.2,
TANK-M-TONER BOTTLE BK;CLP-300,ABS HB,-,
MEA UNIT-TERMINAL:TR;ML-5000A,SAMSUNG,KO
MEA UNIT-TERMINAL GND;CLP-300,SEC,EXPORT
MEA UNIT-FU TERMINAL;CLP-300,SEC,EXPORT,
MEA UNIT-REGIACTUATOR;CLP-300,SEC,EXPORT
MEA UNIT-EXIT ROLLER;CLP-300,SEC,EXPORT,
LABEL(R)-POP(A);COMMON,-,PC+HOLOGRAM,T0.
LABEL-CAUTION;CLP-300,SEC,WHITE POLY,-,W
CUSHION-MAIN BOTTOM;CLP-300,EPP,87,502,4
COVER-M-RIGHT SIDE;CLP-300,ABS FR,T2.5,2
BOX(P)-MAIN;CLP-300,OFFSET4,A-1,515,424,
ELA UNIT-MAIN LINE;CLP-300,SEC,WORLD,220
SOLDER-WIRE FLUX;HSE-02 LFM48 SR-34 S,-,
TAPE-FILAMENT;3M,T0.15,W18,L55M,TRP
TAPE-OPP MASKING;OPP/W75/CLR,T0.05,W75,L
TAPE-FILAMENT;#8915,T0.15,W12,L55000,CLR
THINNER;#4662,-,0.795,-
FLUX;KSP-70M,-,84%,FLUX,SPRAY
GREASE;LUBTECH FF 662,WHITE,-
IC-EEPROM;24C64A,64Kbit,8Kx8Bit,DIP,8P,9
CRYSTAL-UNIT;12MHz,50ppm,28-AAA,16pF,50o
HEADER-BOARD TO CABLE;1WALL,2P,1R,2.5mm,
HEADER-BOARD TO CABLE;1WALL,2P/3P,1R,7.9
HEADER-BOARD TO CABLE;BOX,10P,2R,2mm,STR
HEADER-BOARD TO CABLE;BOX,14P,2R,2mm,STR
HEADER-BOARD TO CABLE;BOX,24P,2R,2mm,STR
HEADER-BOARD TO CABLE;BOX,16P,2R,2mm,STR
HEADER-BOARD TO CABLE;BOX,2P,1R,2mm,STRA
JACK-USB;4P/1C,AU30U,BLK,ANGLE,B TYPE
BAG PE;LDPE,T0.1,W120,L200,TRP,0,0,-
O1102
SA
SNA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
O1068
SNA
SNA
SNA
SNA
SA
SNA
SNA
SNA
SNA
SA
SA
SA
SA
SA
SNA
SNA
SNA
SA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
SNA
SNA
SA
SNA
SA
SA
SA
SNA
SA
SNA
SNA
SNA
SNA
SNA
SNA
BAG PE;LDPE,T0.1,W140,L250,TRP,-,-,-
LABEL(R)-BAR CODE;SF-3000,PY,38X6.5,T0.1
LABEL RATING-BLANK;SF-340,SEC,TETRON,0.0
TONER-MAGENTA;CLP-300,SAM-79GZ-K1,MAGENT
TONER-CYAN;CLP-300,SAC-79GZ-K1,CYAN,8.5?
8
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
JC02-00055A
JC39-00483A
JC39-00496A
JC62-00261A
JC63-00895A
JC63-01046A
JC63-01047A
JC64-00260B
JC66-01145A
JC66-01146A
JC67-00131A
JC67-00135C
JC67-00136A
JC67-00137A
JC67-00140A
JC67-00141A
JC67-00142A
JC67-00145A
JC67-00187A
JC67-00188A
JC68-01032A
JC68-01381B
JC68-01584A
JC68-01707A
JC68-01805A
JC68-10932A
JC69-01014B
JC96-04002A
JC97-02642A
JC97-02647A
JG61-40001A
0201-001183
0205-001056
0205-001067
0401-000116
0407-000122
0501-000462
0505-001326
0601-001226
0601-001383
0803-000634
0904-001989
1105-001535
1107-001302
1202-000164
1203-001455
1203-002233
1203-003739
1205-002339
2007-000066
2007-000067
2007-000077
2007-000080
2007-000082
2007-000094
2007-000097
2007-000105
Description & Specification
Location Service
SNA
SA
TONER-YELLOW;CLP-300,SAY-79GZ-K1,YELLOW,
CBF HARNESS-LSU;CLP-300,WIRE HARNESS,UL1
CBF HARNESS-LSU_GND;CLP-300,WIRE HARNESS
SEAL-SHUTTER A;CLP-300,PE FOAM,-,T10,ID3
COVER-INNER BK;CLP-300,ABS,T2.0,R75,-,HB
SHEET-AGITATOR;CLP-300,PET,T0.125,W25.5,
SHEET-AGITATOR BK;CLP-300,PET,T0.125,W35
HANDLE-BOTTLE Y;CLP-300,ABS,T5.4,-,L43.6
SHAFT-SPRING;CLP-300,POM,L16.5,OD11.5,BL
SHAFT-AUGER K;CLP-300,POM,L70.3,OD10,WHI
TANK-M-TONER BOTTLE Y;CLP-300,ABS HB,-,P
CAP-TONER BOTTLE M;CLP-300,ABS HB,T10.87
CAP-M-TONER BOTTLE BK;CLP-300,ABS HB,-,P
CAP-M-CRUM BOTTLE;CLP-300,ABS HB,-,PI52,
CAP-M-CRUM BOTTLE BK;CLP-300,ABS(HF-0660
CAP-M-CRUM BOTTLE C;CLP-300,ABS(HF-0660I
CAP-M-CRUM BOTTLE M;CLP-300,ABS(HF-0660I
CAP-M-TONER;CLP-300,PP,T4.5,ID16.7,OD19,
CAP-BOTTLE Y;CLP-300,PET,T0.65,W64.53,L5
CAP-BOTTLE BK;CLP-300,PET,T0.65,R39.1,L5
MANUAL-REGISTRATION CARD;COMMON,XGE,ARAB
LABEL(R)-PPID(DEVE);COMMON,DELL,ART,0.05
LABEL(P)-BLANK 90*25;CLP-510,SEE,ART 100
LABEL-FUNCTION;CLP-300,-,YUPO,T0.2,W10,L
LABEL-FUNCTION;CLP-300,SEC,YUPO,T0.2,W10
LABEL(P)-BLANK(ML);ML-85,ART,70X60,G100,
CUSHION-MAIN TOP;CLP-300,EPP,184,502,411
ELA HOU-REGI_EMP;CLP-300,KOREA,KOREA,REG
MEA UNIT-EMPTY ACT;CLP-300,SEC,EXPORT,-,
MEA UNIT-PICKUP ROLL;CLP-300,SEC,EXPORT,
FOOT-SF4000;SF4000,CR,-,BLK,CR,3,-,-
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
D2120
SA
SNA
SNA
SNA
SNA
SA
SA
SA
F1017
SA
ADHESIVE-AA;ARON ALPHA #202F,NTR,100,20G
GREASE-GRAPHITE;CRS841,WHT,-
SNA
SNA
SNA
SNA
SA
SA
SA
SA
SNA
SA
GREASE-GRAPHITE;NYOGEL 756G,HYDRO CARBON
DIODE-SWITCHING;MMSD914T1,100V,200MA,SOD
DIODE-ARRAY;KDS226,80V,300mA,C2-3,SOT-23
TR-SMALL SIGNAL;MMBT2907A,PNP,350mW,SOT-
FET-SILICON;SI2308DS,N,60V,2A,0.22OHM,1.
LED;SMD,RED,1.2x0.8mm,660nm,1.6x0.8mm
LED;ROUND,RED,3.0MM,700NM
IC-TTL;74LS07,BUFFER/DRIVER,SOP,14,150MI
IC-USC;ISP1582BS,-,HVQFN56,56P,8X8X0.85M
IC-DRAM;M12L128168A-7T,-,128MBIT,4X2MX16
IC-FLASH MEMORY;29LV800,1Mx8/512Kx16,TSO
IC-VOLTAGE COMP.;393,SOP,8P,150MIL,DUAL,
IC-POSI.FIXED REG.;1117,DPAK,3P,265MIL,P
IC-RESET;XC61F,SOT-23,3P,-,PLASTIC,0.7/1
IC-DC/DC CONVERTER;MVPG31,DFN,12P,4X3MM,
IC-CLOCK GENERATOR;CY25811SC,SOIC,8P,150
R-CHIP;20Kohm,1%,1/10W,TP,1608
R-CHIP;15Kohm,1%,1/10W,TP,1608
R-CHIP;470ohm,5%,1/10W,TP,1608
R-CHIP;2Kohm,5%,1/10W,TP,1608
R-CHIP;3.3Kohm,5%,1/10W,TP,1608
R-CHIP;22Kohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
R-CHIP;200Kohm,5%,1/10W,TP,1608
SA
SA
SA
SA
SA
SNA
SNA
SA
SA
SA
SA
SA
SA
SA
SA
SA
9
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
2007-000113
2007-000123
2007-000134
2007-000239
2007-000309
2007-000402
2007-000475
2007-000539
2007-000729
2007-000965
2007-001056
2007-002901
2007-007239
2007-008371
2011-001011
2011-001261
2203-000236
2203-000384
2203-000426
2203-000491
2203-005384
2203-005819
2203-006474
2203-006646
2401-000042
2401-000207
2401-002300
2402-001049
2703-000300
2703-002055
2901-001178
3301-000325
3301-001122
3301-001240
3404-000165
3711-003409
3711-003410
3711-003411
6044-001035
JC13-00031B
JC39-00036A
JC39-00490A
JC39-00492A
JC39-00495A
JC39-00577A
JC41-00300A
JC60-00014A
JC60-00015A
JC61-00424A
JC61-01120B
JC61-01158A
JC61-01281A
JC61-01467A
JC61-01469A
JC61-01470A
JC61-01492A
JC61-01501A
Description & Specification
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CHIP;1.5Kohm,5%,1/10W,TP,1608
R-CHIP;33Kohm,5%,1/10W,TP,1608
R-CHIP;1.5Kohm,1%,1/10W,TP,1608
R-CHIP;10ohm,5%,1/10W,TP,1608
R-CHIP;150ohm,5%,1/10W,TP,1608
R-CHIP;1Mohm,1%,1/10W,TP,1608
R-CHIP;200ohm,5%,1/10W,TP,1608
R-CHIP;300ohm,5%,1/10W,TP,1608
R-CHIP;5.1Kohm,5%,1/10W,TP,1608
R-CHIP;6.2Kohm,5%,1/10W,TP,1608
R-CHIP;12.1Kohm,1%,1/10W,TP,1608
R-CHIP;31.6Kohm,1%,1/10W,TP,1608
R-CHIP;280Kohm,1%,1/10W,TP,1608
Location Service
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SNA
SNA
SNA
SA
SA
SA
SA
SA
SA
SNA
SA
SA
SA
SNA
SA
SA
SA
SNA
SA
SNA
SNA
SNA
R-NET;10Kohm,5%,1/16W,L,CHIP,8P,TP,3.2x1
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,2.0x1.
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.015nF,5%,50V,C0G,1608
C-CER,CHIP;0.018nF,5%,50V,C0G,1608
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;4700nF,+80-20%,10V,Y5V,2012
C-CER,CHIP;1000nF,+80-20%,16V,Y5V,-,1608
C-CER,CHIP;22000nF,20%,6.3V,X5R,2012
C-CER,CHIP;10000nF,10%,6.3V,X5R,2012
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
C-AL;100uF,20%,50V,WT,TP,8x12,5
C-AL;47uF,20%,50V,GP,TP,6.3x11,5
C-AL,SMD;10uF,20%,16V,GP,TP,3.3x3.3x5.4
INDUCTOR-SMD;1uH,10%,1608
INDUCTOR-SMD;2.2UH,20%,6363
FILTER-EMI SMD;25V,2A,-,100000pF,2x1.25x
BEAD-SMD;60ohm,3.2x2.5x1.3mm,400mA,TP,,,
BEAD-SMD;600ohm,1.6x0.8x0.8mm,TP,-,-
BEAD-SMD;120ohm,1608,200mA,,393ohm/305MH
SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
HEADER-BOARD TO CABLE;BOX,3P,1R,2mm,STRA
HEADER-BOARD TO CABLE;BOX,4P,1R,2mm,STRA
HEADER-BOARD TO CABLE;BOX,5P,1R,2mm,STRA
RING-ETC;ID2.2,OD6.4,T3,BLK,STS304
IC ASIC-CHORUSM;CHORUSM,SCX-4920N_VE,496
CBF HARNESS-OPE GND;SF-5100,#18,UL 1007,
WIRE HARNESS-WASTE_T;CLP-300,WIRE HARNES
CBF HARNESS-PTL;CLP-300,WIRE HARNESS,UL1
CBF HARNESS-EXIT;CLP-300,WIRE HARNESS,UL
CBF HARNESS-DEVE_ITB;CLP-300,WIRE HARNES
PCB MAIN-GOGH_GDI;CLP-300,FR-4,6L,-,1.6T
FLANGE-M-DRUM OPC;CLP-300,PC(LF1025),W11
SPACER-M-DR G;CLP-300,KL4540,-,ID6.03,OD
BUSH-4;ML-9400W,NTN B-F4-42,-,-,-,NTR,-
PLATE-CRUM;CLP-300,C5210P,0.15,W3,L5.2,-
PLATE-M-KNOCK_UP;ML-1610,HIPS HB,T2,W80,
BRACKET-P-BAR_PICK_UP;ML-1610,SECC,T1.0,
PLATE-P-T2 GROUND;CLP-300,C5210P 1/2H TA
HOLDER-M-LOCATE SHAFT;CLP-300,POM (M90-4
GUIDE-P-T2 INPUT;CLP-300,SECC,T0.6,-,230
FRAME-M-LEFT OPC;CLP-300,ABS+GF20%,-,-,B
PLATE-P-EARTH OPC;CLP-300,C5210P,T0.2,ID
D2158
SA
SNA
SNA
SNA
SNA
SA
SA
SA
SNA
SA
SNA
SNA
SNA
SNA
SA
K2867
K5002
SNA
SA
SNA
SNA
SNA
SNA
SNA
SNA
10
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
Description & Specification
Location Service
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
JC61-01508A
JC61-01509A
JC61-01510A
JC61-01511A
JC61-01512A
JC61-01516A
JC61-01518A
JC61-01519A
JC61-01520A
JC61-01526A
JC61-01527A
JC61-01528A
JC61-01561A
JC61-01562A
JC61-01573A
JC61-01576A
JC61-01670A
JC61-01671A
JC61-01672A
JC61-01673A
JC61-01684A
JC61-01687A
JC61-01700A
JC61-01706A
JC61-01750A
JC61-01751A
JC61-01753A
JC61-01775A
JC61-70929A
JC62-00211A
JC62-00215A
JC62-00216A
JC62-00226A
JC62-00230A
JC62-00231A
JC62-00234A
JC62-00235A
JC62-00236A
JC62-00240A
JC62-00241A
JC62-00256A
JC62-00260A
JC62-00262A
JC62-00269A
JC62-00270A
JC62-00271A
JC62-00272A
JC62-00273A
JC62-00274A
JC62-00275A
JC62-00279A
JC62-00280A
JC62-00306A
JC62-00307A
JC62-00308A
JC62-00320A
JC62-00321A
FRAME-M-DEVE YELLOW;CLP-300,ABS+GF20%,GR
FRAME-M-DEVE MAGENTA;CLP-300,ABS+GF20%,G
FRAME-M-DEVE CYAN;CLP-300,ABS+GF20%,GR40
FRAME-M-DEVE BLACK;CLP-300,ABS+GF20%,GR4
HOLDER-M-DEVE YELLOW L;CLP-300,ABS+GF20%
GUIDE-M-DEVE;CLP-300,ABS+GF20%,GR4020,22
PLATE-P-SUPPLY ROLLER;CLP-300,SUS 301-CS
PLATE-P-DEVE ROLLER;CLP-300,SUS 301-CSP
FRAME-M-DEVE MAIN;CLP-300,ABS GF20%,GR-4
GUIDE-M-BUSH IDL ITB R;CLP-300,POM M90-4
HOLDER-P-SEAL DEVE L;CLP-300,SUS301-CSP
HOLDER-P-SEAL DEVE R;CLP-300,SUS301-CSP
HOLDER-M-DEVE ROLLER;CLP-300,POM M90-44,
GUIDE-M-DRIVE ITB;CLP-300,POM(M90-44),-,
HOLDER-SUPPORT;CLP-300,ABS,T14.5,W26.5,L
BUSH-SHAFT;CLP-300,POM,ID3.0,OD4.5,T3.5,
GUIDE-M-SENSOR R;CLP-300,PS,T10.29,W11.7
GUIDE-M-SENSOR BK R;CLP-300,PS,T10,W13.4
GUIDE-M-SENSOR BK L;CLP-300,PS,T10,W13.4
BLADE-CLEANING ITB;CLP-300,POLYURETHANE,
BLADE-SENSOR;CLP-300,PET FILM,-,W6.3*L9.
SPRING ETC-LOCK;CLP-300,PW-2,PI1.3,-,-,L
GUIDE-WASTE;CLP-300,PC,-,31,41,TRANSPARE
STUD-GEAR ITB;CLP-300,SUM22L,-,-,-,-,OD6
BRACKET-P_GUIDE PR;CLP-300,SUS,T1.0,W232
GUIDE-P_PAPER PR;CLP-300,SUS304,T0.1,W21
PLATE-_P-DEVE SUPPORT;CLP-300,STSC301-CS
BRACKET-CAM BAR;CLP-300,SECC,T1.2,W4.5,L
SPRING ETC-HV LARGE;ML-5000A,SUS304-WPB,
SEAL-DRUM OPC;CLP-300,URETHANE FILM,-,T0
SEAL-SIDE DEVE;CLP-300,PORON LE20,BLACK,
SEAL-BRACKET OPC;CLP-300,EPDM,-,T2.7,W3,
SEAL-DOCTOR BLADE;CLP-300,EPDM,-,T4.0,W4
SEAL-SIDE RIGHT OPC;CLP-300,POLYURETHANE
SEAL-SIDE LEFT OPC;CLP-300,POLYURETHANE
SEAL-DEVE BLOCK;CLP-300,POLYURETHANE,-,3
SEAL-DEVE ROLLER;CLP-300,PET Film,-,0.07
SEAL-DEVE FRONT;CLP-300,PET FILM,-,0.075
SEAL-AUGER;CLP-300,PORON ,BLACK,T5.0,ID4
SEAL-COVER DUCT;CLP-300,PE FOAM,-,T2.0,W
SEAL-FRAME WASTE OPC;CLP-300,PORON LE-20
SEAL-CAP CRUM;CLP-300,Polyurethane Foam(
SEAL-WASTE;CLP-300,PE FORM,-,T3.0,W4,L13
SEAL-COVER FRONT;CLP-300,PE FOAM,-,T2.0,
SEAL-COVER BOTTOM;CLP-300,POLYURETHANE F
SEAL-COVER DEV K;CLP-300,PE FOAM,-,T3.0,
SEAL-LSU REAR;CLP-300,URETHAN FILM,NTR,T
SEAL-DEVE ROLLER K;CLP-300,PET FILM,-,T0
SEAL-SIDE GAP OPC;CLP-300,POLYURETHAN FO
SEAL-BLADE;CLP-300,PE FOAM,-,T3.0,W3,L8.
SEAL-SENSOR BK;CLP-300,FLOCKING(DOBIRU),
SEAL-SENSOR Y;CLP-300,FLOCKING(DOBIRU),B
SEAL-CAP DUCT;CLP-300,FLOCKING,-,T0.5,W8
SEAL-SENSOR;CLP-300,FLOCKING,-,T0.5,W13.
SEAL-DOCTOR BLADE S;CLP-300,EPDM,-,T2.0,
SEAL-WASTE F;CLP-300,PE FOAM,GRAY,2.0T,W
SEAL-WASTE R;CLP-300,PE FOAM,GRAY,2.0T,w
Z4437
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
11
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
Description & Specification
Location Service
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
JC62-00324A
JC62-00341A
JC62-00342A
JC62-00343A
JC63-00853A
JC63-00858A
JC63-00883A
JC63-00898A
JC63-00899A
JC63-00900A
JC63-00901A
JC63-01048A
JC63-01086A
JC63-01087A
JC63-01164A
JC64-00217A
JC64-00276A
JC66-00494A
JC66-00604A
JC66-00830A
JC66-01058A
JC66-01072A
JC66-01075A
JC66-01081A
JC66-01090A
JC66-01091A
JC66-01092A
JC66-01093A
JC66-01094A
JC66-01099A
JC66-01100A
JC66-01101A
JC66-01102A
JC66-01103A
JC66-01107A
JC66-01108A
JC66-01109A
JC66-01114A
JC66-01115A
JC66-01116A
JC66-01117A
JC66-01121A
JC66-01122A
JC66-01123A
JC66-01125A
JC66-01126A
JC66-01127A
JC66-01129A
JC66-01130A
JC66-01137A
JC66-01142A
JC66-01143A
JC66-01230A
JC66-01295A
JC66-01298A
JC66-01302A
JC67-00143A
SEAL-WASTE B;CLP-300,POLY-URETHANE(SHL),
SEAL-WASTE EXIT;CLP-300,PORON LE-20 + PE
SEAL-SIDE CLN OPC;CLP-300,POLYURETHANE F
SEAL-SENSOR TOP;CLP-300,EPDM,-,T2.5,W4,L
COVER-M-TONER BOTTLE;CLP-300,ABS HB HF-0
COVER-M-WASTE OPC;CLP-300,ABS,T2,W15.8,L
COVER-M-WASTE;CLP-300,PC(141R),T2.0,W77,
COVER-M-DEVE Y;CLP-300,ABS HF0660I,T1.5,
COVER-M-DEVE M;CLP-300,ABS HF0660I,T1.5,
COVER-M-DEVE C;CLP-300,ABS HF0660I,T1.5,
COVER-M-DEVE K;CLP-300,ABS HF0660I,T1.5,
SHEET-COVER HARNESS;CLP-300,PC,T0.125,W4
SHEET-WASTE;CLP-300,PET,T0.188,W24,L24,B
SHEET-LSU COVER;CLP-300,PC,T0.38,W17,L23
SHEET-HOUSING REAR;CLP-300,PC,T0.38,W11.
HANDLE-M-UNIT;CLP-300,ABS,7.0T,50.5,130,
LOCKER-FRAME;CLP-300,PC,BLK,-,-,-
GEAR-OPC ROLL CLEAN_Z18;CLP-500,POM,M0.8
ROLLER-CHARGER CLEANING;CLP-500,URETHAN+
ROLLER-M-EXIT FR;ML-1610,TEFLON,6.5,L22.
LATCH-M-CLUTCH SPRING;CLP-300,POM,T1.2,D
SHAFT-LOCATE;CLP-300,SUM 22+NI(COATING),
LEVER-M-RELEASE L;CLP-300,ABS+GF20%,T2.0
GEAR-RDCN T2 DRIVE;CLP-300,POM,M0.8/M0.8
GEAR-DEVE ROLLER;CLP-300,POM DE8903,M0.6
GEAR-SUPPLY ROLLER;CLP-300,POM DE588P,M0
SHAFT-M-AUGER SUPPLY;CLP-300,ABS GF20% G
SHAFT-M-BELT;CLP-300,POM(M90-44),24.8,¥ÕS
LEVER-M-WASTE SENSOR;CLP-300,ABS,3.0T,18
SHAFT-M-AUGER TONER Y;CLP-300,ABS GF20%
SHAFT-M-AUGER TONER M;CLP-300,ABS GF20%
SHAFT-M-AUGER TONER C;CLP-300,ABS GF20%
SHAFT-M-AUGER TONER K;CLP-300,ABS GF20%
LEVER-M-LOCK DEVE FRAME;CLP-300,ABS,2.0T
GEAR-AUGER SUPPLY;CLP-300,POM DE588P,M0.
GEAR-IDLE;CLP-300,POM DE8903,M0.6/M0.5,Z
GEAR-AUGER TONER;CLP-300,POM DE588P,M0.5
GEAR-DRIVE Z20;CLP-300,POM (DE588P),M0.8
GEAR-WORM AGITATOR;CLP-300,PC-141R,-,-,-
GEAR-IDLE M08Z30L;CLP-300,POM (M90-44),M
GEAR-IDLE ITB;CLP-300,POM (M90-44),M0.8,
LEVER-M-T2 HOLDER R;CLP-300,ABS+GF20%,T2
LEVER-M-T2 HOLDER L;CLP-300,ABS+GF20%,T2
GEAR-AUGER OPC;CLP-300,POM (M90-44),M0.5
ROLLER-DEVE;CLP-300,NBR+ECO,OD10,L295.3,
ROLLER-SUPPLY;CLP-300,Fur Brush,OD9.15,L
DRUM-OPC;CLP-300,AL,ID58,OD60,L248,-,-
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
ROLLER-DRIVE ITB;CLP-300,AL+EPDM,OD29.7,
ROLLER-IDLE ITB;CLP-300,AL,OD30,L234,-,-
GEAR-DRIVE ITB;CLP-300,PC(LF1025),M0.5,Z
ROLLER-SLIDE A;CLP-300,POM,L10,OD10.2,BL
ROLLER-SLIDE B;CLP-300,POM,L20,OD14,BLAC
SHAFT-DEVE FRAME;CLP-300,SUS303,L28.4,¡ËS
SHAFT-AUGER SUPPLY Y;CLP-300,ABS GF20% G
SHAFT-AUGER SUPPLY C;CLP-300,ABS GF20% G
SHAFT-HOUSING PICK UP;CLP-300,SUM22+NI C
CAP-M-WASTE BOTTLE;CLP-300,LDPE(MB9205),
12
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
JC67-00144A
JC67-00162A
JC67-00191A
JC70-10232A
JC70-40912A
JC71-00009A
JC72-01004A
JC73-00217A
JC73-00221A
JC92-01708A
JC92-01721A
JC92-01722A
JC94-01119A
JC94-01120A
JC94-01121A
JC94-01122A
JC94-01123A
JC94-01124A
JC94-01125A
JC94-01126A
JC94-01129A
JC94-01130A
JC97-01788C
JC97-02620A
JC97-02628A
JC97-02643A
JC97-02644A
JC97-02694A
0407-000101
0501-000457
0601-000003
0601-001138
0601-001908
0603-001021
1103-001366
2001-000831
2007-000033
2007-000070
2007-000078
2007-000086
2007-000090
2007-000730
2007-001003
2201-000021
2203-000189
2203-000626
2203-005249
2404-001102
3711-002001
JC39-00491A
JC41-00171C
JC41-00201A
JC41-00296A
JC41-00298A
JC41-00299A
JC61-01471A
JC61-01507A
Description & Specification
TANK-M-WASTE;CLP-300,ABS(TR557A),T2.0,W1
CAP-DUCT;CLP-300,NBR,T0.7,17.8,19.7,-,-
CAP-DUMMY;CLP-300,ABS,-,-,L31.4,DM GRAY,
IPR-PLATE SAW;ML-80,SUS304 CSP 1/2H,-,T0
ICT-SHAFT HV LARGE;ML-5000A,SWCH18A,-,¥÷
NPM-BUSHING DEV R;ML-6060,BRONZE,D7*12,-
PMO-IDLE KNOCK UP MP;ML-2150,POM,BLK,-,M
RUBBER-BELT YELLOW;CLP-300,NBR,0.7T,-,22
RUBBER-BELT WASTE OPC;CLP-300,NBR,L335.9
PBA SUB-DEVE_JOINT;CLP-300,SEC,KOREA,DEV
PBA SUB-REGI_EMPTY;CLP-300,SEC,KOREA,REG
PBA SUB-WASTE_R;CLP-300,SEC,KOREA,WASTE_
0
0
0
0
0
0
0.1
0.1
0.1
Location Service
SNA
SNA
SNA
O1099
O1100
SA
SA
SNA
SA
P0041
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
SNA
SNA
SNA
SA
SA
SA
SNA
SNA
SA
SNA
SA
0.2
MEA UNIT-CLUTCH TONER;CLP-300,-,WORLD,M0
MEA UNIT-SUS BLADE;CLP-300,SEC,WORLD,-,-
MEA UNIT-T2 ROLLER;CLP-300,SEC,WORLD,-,-
MEA UNIT-BLADE OPC;CLP-300,SEC,EXPORT,-,
MEA UNIT-CHARGE OPC;CLP-300,SEC,EXPORT,-
MEA-GUIDE IDL ITB;CLP-300,SEC,WORLD,-,-,
DIODE-ARRAY;DA204K,20V,100mA,C2-3,SOT-23
TR-SMALL SIGNAL;MMBT2222A,NPN,350mW,SOT-
LED;ROUND,RED/GRN,3.1MM,650/563NM,3.8X5.
LED-IR;ROUND,5mm,150mW,4V,950nm,BK
LED;ROUND,RED,3MM,630NM,3.2X4.6MM
PHOTO TR;NPN,20V,5V,20mA,75mW,TP
IC-EEPROM;34C02,2KBIT,256X8BIT,SOP,8P,5X
R-CARBON;510OHM,5%,1/4W,AA,TP,2.4X6.4MM
R-CHIP;0ohm,5%,1/4W,TP,3216
SA
SA
SA
SA
SA
SA
SNA
DNA
SA
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;5.6Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;300ohm,5%,1/4W,TP,3216
R-CHIP;510ohm,5%,1/4W,TP,3216
C-CERAMIC,DISC;100NF,+80-20%,50V,Y5V,TP,
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608
C-CER,CHIP;0.022nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,50V,X7R,1608
C-TA,CHIP;33uF,20%,16V,GP,TP,6032,-
HEADER-BOARD TO CABLE;BOX,20P,2R,2MM,STR
CBF HARNESS-WASTE_R;CLP-300,WIRE HARNESS
PCB-PTL (1LAYER);SCX-4100,FR-1,1,-,1.6T,
PCB-TONER_TX;CLP-500,FR-1,1L,-,1.2,15*10
PCB SUB-ITB_JOINT;CLP-300,FR-1,1L,-,1.6T
PCB SUB-TONER_CRUM;CLP-300,FR-4,2L,-,1.6
PCB SUB-PANEL;CLP-300,FR-1,1L,-,1.6T,45*
HOLDER-M-T2 ROLLER R;CLP-300,POM (M90-44
PLATE-P-DOCTOR BLADE;CLP-300,SECC,1.2T,3
SA
SNA
SNA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
13
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE
Drawer#
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
SEC-Code
JC61-01525A
JC61-01545A
JC61-01575A
JC61-01668A
JC61-01674A
JC66-01073A
JC66-01098A
JC66-01104A
JC66-01224A
JC66-01308A
JC70-00525A
JC71-10322B
JC94-01118A
JC94-01127A
JC94-01128A
0402-001189
1001-000170
1404-001141
2001-000281
2007-000074
2007-000084
2007-000119
2007-000122
2007-000839
2007-000939
2007-007233
2007-007550
2007-007613
2203-000257
2203-000440
3711-005561
3711-005596
3711-005851
3711-006032
JC41-00133A
JC41-00202A
JC41-00295A
Description & Specification
GUIDE-M-BUSH IDL ITB L;CLP-300,POM M90-4
BRACKET-P-CLEANING OPC;CLP-300,SECC,T1.2
BLADE-P-DOCTOR;CLP-300,SUS,NATURAL,223*1
COLLAR-M-CLUTCH;CLP-300,POM,ID11.4,OD13.
BLADE-CLEANING OPC;CLP-300,POLY URETHANE
GEAR-T2 ROLLER;CLP-300,POM,M0.8,Z28,-,WH
GEAR-CHARGE;CLP-300,POM (M90-44),M0.8,Z1
ROLLER-TRANSFER;CLP-300,SUM22+HYBRID FOA
GEAR-WORM CLUTCH;CLP-300,POM,M0.8,Z2,-,W
ROLLER-CHARGE;CLP-300,NBR+ECO,D12,L230,-
HUB-M-CLUTCH SPRING;CLP-300,POM,-,D13.4,
NPR-EARTH OPC;-,ML-80,C5210P-1/2H,T0.2,-
0
Location Service
SNA
SNA
SNA
SNA
SNA
SA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SNA
SA
SA
SNA
SA
SA
SA
SA
SA
SA
SNA
SNA
SNA
SNA
SA
0.1
0.1
DIODE-RECTIFIER;M4,400V,1A,TS-1,TP
IC-ANALOG SWITCH;MC14051BD,SPDT CMOS,SOP
THERMISTOR-NTC;5.6Kohm,5%,3200K,2.1mW/C,
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X3.2MM
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;1.2Kohm,5%,1/10W,TP,1608
R-CHIP;39ohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,1%,1/10W,TP,1608
R-CHIP;61.9ohm,1%,1/10W,TP,1608
R-CHIP;3.16Kohm,1%,1/10W,TP,1608
R-CHIP;121ohm,1%,1/10W,TP,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
CONNECTOR-HEADER;BOX,5P,1R,2MM,SMD-S,SN,
HEADER-BOARD TO CABLE;BOX,3P,1R,2MM,SMD-
HEADER-BATTERY;NOWALL,2P,1R,4.25MM,BATTE
CONNECTOR-HEADER;BOX,2P,1R,2MM,SMD-A,SN,
PCB-SENSOR;SCX-5100,FR-1,1L,-,1.6T,22X12
PCB-TONER_RX;CLP-500,FR-1,1L,-,1.2,15*10
PCB SUB-DEVE_JOINT;CLP-300,FR-1,1L,-,1.6
SA
SA
SNA
SA
SNA
SNA
SNA
SNA
14
Block Diagram
9. Block Diagram
9
Service Manual
9-1
Samsung Electronics
Connection Diagram
10. Connection Diagram
10
_
_
z
H
_
_
_
3M0
_
Service Manual
10-1
Samsung Electronics
Schematic Diagram
11. Schematic Diagrams
11.1 Main Board(1/15)
1
2
3
4
5
6
7
8
A
B
C
D
E
F
A
B
C
Page
Function
1
2
Index
CHORUSm(1)
CHORUSm(2)
3
4
5
6
Clock & Power On Reset
Flash Memory
SDRAM
7
8
USB Host & Device Controller
Ethernet Physical Layer
Scanner Interface
9
10
11
12
13
14
15
Hyper Terminal, EEPROM, OPE
SmartDAA Interface
LSU
DEVE_HOME, SCF, FUSER THER
BLDC, CLUTCH, DEVE & ITB JOINT
HVPS, SMPS, COVER_OPEN
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
05.06.03
1/15
INDEX
Service Manual
11-1
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(2/15)
Schematic Diagram
1
2
3
4
5
6
7
8
ADDR(1:23)
DATA(0:31)
OP_Y_LED
OP_M_LED
OP_C_LED
OP_K_LED
+3.3V
OP_STA_LED1
OP_STA_LED2
OP_MODE_LED
A
A
B
C
D
E
DGND
nOP_KEY_MODE
nOP_KEY_ONLINE
RA16
10K
JTAG
CN9-1
35303-0850
8
7
6
5
4
3
2
1
nRESET
C14
A17
D15
E15
C15
A18
nACK
PDE
nFAULT
SLCT_OUT
PERROR
BUSY
C86
C85
15pF
15pF
B
C
D
E
F
AD5
AF5
AE5
AE4
AD4
nTRST
TCK
TMS
TDI
DGND
B1
D3
E1
F4
D1
D2
E2
E3
F5
G5
C2
E4
G6
F6
E5
C3
D4
C1
TDO
MDC_GPO_19
MDIO_GPIO1_31
COL_GPI_9
TX_CLK_GPI_10
MAC_TXD0_GPO_20
MAC_TXD1_GPO_21
MAC_TXD2_GPO_22
MAC_TXD3_GPO_23
TX_EN_GPO_24
TX_ERR_GPO_25
RX_ERR_GPI_11
CRS_GPI_12
RX_CLK_GPI_13
MAC_RXD0_GPI_14
MAC_RXD1_GPI_15
MAC_RXD2_GPI_16
MAC_RXD3_GPI_17
RX_DV_GPI_18
MAC_MDC
MAC_MDIO
MAC_COL
T4
R5
nRD
nWR
nRD
nWR
MAC_TX_CLK
MAC_TXD0
MAC_TXD1
MAC_TXD2
MAC_TXD3
MAC_TX_EN
MAC_LED_CON
MAC_RX_ERR
MAC_CRS
MAC_RX_CLK
MAC_RXD0
MAC_RXD1
MAC_RXD2
MAC_RXD3
MAC_RX_DV
T5
T2
T3
U3
nROMCS0
nROMCS1
nROMCS2_GPO_2
nROMCS3_GPO_3
nCS_BOOT
RA11 33
nRST_USB_DEVICE
nRST_NIC
R1
R2
R3
R4
P3
P4
nIOCS0
nIOCS1
nIOCS2
nCS_USB_DEVICE
nCS_MODEM
nCS_USB_HOST
nIOCS3_GPO_4
nIOCS4_nIOCS4_CIP4E_GPO_5
nIOCS5_GPO_6
U4
U5
nWAIT0_GPI_0
nWAIT1_GPI_1
nADF_P_DET
E13
C12
D12
+3.3V
TXD0
TXD1
TXD2
U10-1
H3
J5
nDREQ0_nDREQ0_CIP4E_GPI_2
nDREQ1_nDREQ1_CIP4E_GPI_3
nDREQ2_nDREQ2_CIP4E_GPI_4
nDREQ3_nDREQ3_CIP4E_GPI_5
nDACK0_nDACK0_CIP4E_GPO_7
nDACK1_nDACK1_CIP4E_GPO_8
nDACK2_nDACK2_CIP4E_GPO_9
nDACK3_GPO_10
nDREQ_USB_DEVICE
DEBUG_TXD
PANEL_TXD
SCF_TXD
TEST JIG
JC13-00031A
H5
G4
H2
H4
G2
G3
AE25
AE26
C9
TXD3_GPO_17
TXD4_GPO_18
RXD0
RXD1
RXD2
RXD3_GPI_7
RXD4_GPI_8
nADF_P_POS
nADF_P_REG
nDACK_USB_DEVICE
SCF_CLK
chrousm
B9
E12
DEBUG_RXD
PANEL_RXD
SCF_RXD
R72
10K
nRST_MODEM
nRST_USB_HOST
AD24
AF26
nSCF_RDY
A12
B12
C11
C10
D10
A10
A9
XI_MAIN
XI_MCLK
XO_MCLK
AA21
AD22
XOUT_MAIN
MAIN_FILTER
XI_VCLK
XOUT_VCLK
VCLK_FILTER
PCIPLL_CLK
RTC_XI
SCL
SDA
SCL
SDA
C154
2.2nF
XI_VCLK
XO_VCLK
AF1
AF2
AF3
AE1
AE2
AE3
AF4
NF_CLE_GPIO2_0
NF_ALE_GPIO2_1
NF_nCE_GPIO2_2
NF_nRE_GPIO2_3
NF_nWE_GPIO2_4
NF_BOOT
NF_CLE
NF_ALE
NF_nCE
NF_nRE
NF_nWE
C145
R77
2.2nF
10K
A13
B13
XI_RTC
XO_RTC
RTC_XOUT
D9
E10
G1
AC5
AC6
AB6
AA6
AD6
nRESET
NF_RnB_GPIO2_5
nRESET
nRST_PANEL
NF_RnB
nRSTOUT_GPO_0
CLKOUT_GPO_1
TESTMODE
OM0
OM1
OM2
AC23
AE24
AF25
AF24
AC22
AD23
AE23
AF23
GPIO_A0_TX_EN3_TESTOUT8_GPIO_6
GPIO_A1_TX_EN4_TESTOUT9_GPIO_7
GPIO_A2_TX_C_TESTOUT10_GPIO_8
FLAT_MOT_PLS
nFLAT_MOT_EN
R70
R66
0
nFLAT_MOT_SLEEP
FLAT_MOT_DIR
FLAT_MOT_MS1
FLAT_MOT_MS2
LSU_SH1
GPIO_A3_TX_D_TESTOUT11_GPIO_9
10K
GPIO_A4_nTX_C_TESTOUT12_GPIO_10
GPIO_A5_nTX_D_TESTOUT13_GPIO_11
GPIO_A6_SAM_HOLD0_TESTOUT14_GPIO_12
GPIO_A7_SAM_HOLD1_TESTOUT15_GPIO_13
OM3
DGND
F1
F2
J25
H25
F3
EINT0
EINT1
EINT2_GPI_19
EINT3_GPI_20
EINT4_GPI_21
EINT5_GPI_22
nINT_USB_DEVICE
nINT_WNIC
nINT_MODEM
nINT_USB_HOST
nITB_HOME
LSU_SH2
+3.3V
J24
CLX-3160N(FN) Only
R3
220K
U1-5
+3.3V
U1-4
NR3
0
10
11
8
9
RA34
10K
RA15
10K
C10
100nF
R17
10K
74LCX14
74LCX14
DGND
DGND
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
SD(0:31)
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
SA(0:12)
CHORUSm(1)
8
2/15
1
2
3
4
5
6
7
Service Manual
11-2
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(3/15)
Schematic Diagram
1
2
3
4
5
6
7
8
RTC
VSB
+3.3V
+1.2V
A
A
VSB Vb
D22
MMSD914T1
+3.3V
+1.2V
FOR FUTURE MODEL
FOR CLX-3160FN MODEL
C226
10uF
16V
D23
RB420D T147
DGND
2402-001049
R112
200
1
A25
B24
C22
D22
D18
C24
D20
B18
A19
B19
A20
B20
D19
A21
B21
A22
B22
E18
D23
C20
C23
C18
VDO1_GPO_15
VDO2_GPO_16
nHSYNC1_GPIO1_0
nHSYNC2_GPIO1_1
nFSYNC_GPI_6
B
B
C
D
E
AFE_SLOAD
nHSYNC1
nBLDC_MOTOR_EN
BLDC_MOTOR_READY
LSU_MOT_CLK
BAT1
CR-2032T6
AFE_D(0:7)
J23
J22
K26
K25
K24
K23
L25
L24
L23
L22
AB22
AD26
AD25
AC26
AC25
AC24
AB25
AB24
AB23
AA22
AA23
AA24
AA25
Y21
Y22
AFE_D(0)
AFE_D0
AFE_D1
AFE_D2
AFE_D3
AFE_D4
AFE_D5
AFE_D6
AFE_D7
AFE_D8
AFE_D9
SRAM_A0
SRAM_A1
SRAM_A2
SRAM_A3
SRAM_A4
SRAM_A5
SRAM_A6
SRAM_A7
SRAM_A8
SRAM_A9
SRAM_A10
SRAM_A11
SRAM_A12
SRAM_A13
SRAM_A14
2
AFE_D(1)
LSUCLK_cCLK
AFE_D(2)
nPRINT_nCMSG
nLREADY_nEMSG
VDO1_Plus
VDO1_Minus
VDO2_Plus
VDO2_Minus
PHIALVDS
nHSYNC1_Plus
nHSYNC1_Minus
nHSYNC2_Plus
nHSYNC2_Minus
LSYNC1_MOD_GPIO1_2
LSYNC2_MOD_GPIO1_3
VDO_OUT1_MOD_GPIO1_4
VDO_OUT2_MOD_GPIO1_5
VLCK_MOD_GPIO1_6
AFE_D(3)
nLSU_READY
VDO1_plus
AFE_D(4)
DGND
AFE_D(5)
VDO1_minus
VDO2_plus
AFE_D(6)
AFE_D(7)
VDO2_minus
R89
3.3K
SRAM_A(0:15)
SRAM_A(0)
SRAM_A(1)
SRAM_A(2)
DGND
SRAM_A(3)
nFUSER_EN
nLD_EN
nLSU_MOTOR_EN
PICKUP_CLUTCH
REGI_CLUTCH
SRAM_A(4)
SRAM_A(5)
C
D
E
F
SRAM_A(6)
SRAM_A(7)
SRAM_A(8)
SRAM_A(9)
A26
D24
C25
B26
C26
D25
E22
E23
E24
E25
D26
E26
SRAM_A(10)
PD1_MOD0_GPIO1_7
PD1_MOD1_GPIO1_8
PD1_MOD2_GPIO1_9
PD1_MOD3_GPIO1_10
PD1_MOD4_GPIO1_11
PD1_MOD5_GPIO1_12
PD1_MOD6_GPIO1_13
PD1_MOD7_GPIO1_14
PD1_MOD8_GPIO1_15
PD1_MOD9_GPIO1_16
PD1_MOD10_GPIO1_17
PD1_MOD11_GPIO1_18
FAN_MAIN
PTL
nTHV_EN
SRAM_A(11)
SRAM_A(12)
SRAM_A(13)
DEV_CLUTCH
ERASE_LAMP
ITB_CLUTCH
THV_CLUTCH
nDEV_EN
DEV_SOL1
DEV_SOL2
DEV_SOL3
DEV_SOL4
SRAM_A(14)
Y23
SRAM_A(15)
SRAM_A15
SRAM_D(0:15)
Y24
Y25
W23
W24
W25
V22
V23
V24
V25
U22
U23
U24
U25
U26
T23
T24
T25
P25
AA26
W26
T26
P26
L26
H26
R22
R23
R24
R25
P22
P23
P24
N24
N23
N25
M22
M23
M24
M25
SRAM_D(0)
SRAM_D(1)
SRAM_D(2)
SRAM_D(3)
SRAM_D(4)
SRAM_D(5)
SRAM_D(6)
SRAM_D(7)
SRAM_D(8)
SRAM_D(9)
SRAM_D(10)
SRAM_D(11)
SRAM_D(12)
SRAM_D(13)
SRAM_D(14)
SRAM_D(15)
U10-2
SRAM_D0_GPIO_0
SRAM_D1_GPIO_1
SRAM_D2_GPIO_2
SRAM_D3_GPIO_3
SRAM_D4_GPIO_4
SRAM_D5_GPIO_5
SRAM_D6_GPIO_6
SRAM_D7_GPIO_7
SRAM_D8_GPIO_8
SRAM_D9_GPIO_9
SRAM_D10_GPIO_10
SRAM_D11_GPIO_11
SRAM_D12_GPIO_12
SRAM_D13_GPIO_13
SRAM_D14_GPIO_14
SRAM_D15_GPIO_15
SRAM_nWR
PItg1
F22
F23
F24
F25
F26
G21
G22
G23
G24
G25
H23
H24
PD2_MOD0_CLK_LINE_GPIO1_19
nP_EMPTY
nP_EXIT
PD2_MOD1_CLK_PIX_IWIN_GPIO1_20
PD2_MOD2_OUT_CLK_LINE_GPIO1_21
PD2_MOD3_OUT_CLK_PIX_GPIO1_22
PD2_MOD4_OUT_IWIN_GPIO1_23
PD2_MOD5_OUT_BIN_GPIO1_24
PD2_MOD6_AFE_D10_GPIO1_25
PD2_MOD7_AFE_D10_GPIO1_26
PD2_MOD8_AFE_D12_GPIO1_27
PD2_MOD9_AFE_D13_GPIO1_28
PD2_MOD10_AFE_D14_GPIO1_29
PD2_MOD11_AFE_D15_GPIO1_30
nREGI_SENS
nCOVER_OPEN
nDEV_HOME
WASTE_EMPTY
SCANNER_BW_CONTROL
nFLAT_COVER_OPEN
nSCANNER_HOME
nADF_MODULE_DETECT
WASTE_LED
nSRAM_WR
SCANNER_PI_TG1
SCANNER_PI1
PI1
PI2
PIrs
PIcp
ADC_CLK
CDS2_CLK
nBIN_FULL
SCANNER_PI2
SCANNER_PI_RS
SCANNER_PI_CP
AFE_ADC_CLK
AFE_CDS2_CLK
SCANNER_DPI_CONTROL
SCANNER_PI_SH
AFE_SDATA
B6
B10
D11
B23
F20
GND_A
GND_PLL_1
GND_PLL_2
GND_RING_1
GND_RING_2
LEVEL_SHIFT_GPIO_17
Plsh_GPIO_18
Pltg3_GPIO_19
BLED_GPIO_20
GLED_GPIO_21
RLED_GPIO_22
Pltg2_GPIO_23
TX_EN1
A1
A11
A24
B17
E20
G26
H1
K10
K11
K12
GND_1
GND_2
GND_3
GND_4
GND_5
GND_6
GND_7
GND_8
GND_9
GND_10
TEST_LED3
AFE_SCLK
DGND
nADF_MOT_PHA
nADF_MOT_PHB
nADF_MOT_A
nADF_MOT_B
nADF_MOT_NB
nADF_MOT_NA
TX_EN2
TX_A
TX_B
nTX_A
nTX_B
MOTOR_POL
+3.3V
R107
10K
Digtal Printing Division
R&D 5
Engineer K.C.LEE
Drawn by
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
F
+3.3V
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
DGND
MFG ENGR CHK
CHORUSm(2)
3/15
1
2
3
4
5
6
7
8
Service Manual
11-3
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(4/15)
Schematic Diagram
1
2
3
4
5
6
7
8
A
A
B
C
D
C129 15pF
OSC2
C165
22pF
22pF
+3.3V
XI_VCLK
XI_RTC
C210
15pF
C211
LED1
5.1K
SLS-NNGA102TS
DGND 15pF
OSC5
TEST_LED3
R175
OSC3
MC-306,32.768KHz
XO_RTC
XO_VCLK
+3.3V
ATS-49/U,12MHz,50ppm
C128 15pF
C155
DGND
F1
STS104B
ATS-49/U,12MHz,50ppm
+3.3V
1
3
DGND
U12
1
2
8
2
XIN/CLKIN
XOUT
VDD
C194
100nF
R190
7
6
5
0
VSS
S1
[ VCLK ]
[ RTC ]
3
FRSEL
SSCLK
DGND
B
R88
33
4
S0
XI_MCLK
NR114
R189
C178
15pF
CY25811
0
0
C312
22pF
DGND
DGND
DGND
+5V
+1.2V
+5V
+3.3V
U19
S0
S1
F3
STS104B
U24
F2
LD1117DT33C
2
0%
N.C
N.C
STS104B
1
3
3
L9
OUT
IN
2.2uH
0.4%
0.5%
1.1%
1.3%
LOW
1
N.C
0
1
3
7
6
PVIN
SW
SFB
GND
2
C255
100uF
16V
C
D
E
F
8
10
4
5
1
R115
C303
10uF
16V
SVIN
2
C301
100nF
31.6K,1%
280K,1%
N.C
0
0
R105
R109
10
11
12
SHDN
SGND
VSET
PSET
C243
22uF
0
[ SYSTEM CLOCK ]
C234
100nF
C244
10uF
DGND
MVPG31
DGND
nRESET
CLX-3160FN ONLY
+3.3V
R170
+3.3V
Q9
Vb
L8
L5
R121
0
C308
47uF
16V
1K
Q11
R172
+3.3V
KSC1623-Y
R142 300
1
2
100
U25
3
KSB1151-Y
NR6
3
30K
1
1
Vout
3
Vin
DGND
FGND
2
DGND
E
R151
470K
2
Vss
+5V
3301-000325|R3225_BEAD
C277
100nF
C302
1nF
D27
RB420D T147
XC61FN3112MR
2
3
R152 5.6K
1
Q12
KSA1182-Y
R161
56
DGND
DGND
DGND
R162 56
VBIN
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
[ SYSTEM RESET ]
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
F
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
4/15
Clock & Power On Reset
1
2
3
4
5
6
7
8
B
1
B
Service Manual
11-4
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(5/15)
Schematic Diagram
1
2
3
4
5
6
7
8
Model
Configuration Size
8Mbit * 2
2MB
A
B
C
D
E
F
A
B
C
D
E
CLP-300
(1107-001302)
16Mbit * 2
(1107-001286)
4MB
4MB
CLP-300N
ADDR(22:2)
DATA(31:0)
U9
CLX-3160N 16Mbit * 2
CLX-3160FN (1107-001286)
9
45
43
41
39
36
34
32
30
44
42
40
38
35
33
31
29
DATA(15)
DATA(14)
DATA(13)
DATA(12)
DATA(11)
DATA(10)
DATA(9)
DATA(8)
DATA(7)
DATA(6)
DATA(5)
DATA(4)
DATA(3)
DATA(2)
DATA(1)
DATA(0)
ADDR(21)
ADDR(20)
ADDR(19)
ADDR(18)
ADDR(17)
ADDR(16)
ADDR(15)
ADDR(14)
ADDR(13)
ADDR(12)
ADDR(11)
ADDR(10)
ADDR(9)
ADDR(8)
ADDR(7)
ADDR(6)
ADDR(5)
ADDR(4)
ADDR(3)
ADDR(2)
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
16
17
48
1
2
3
4
5
6
7
FOR FUTURE PDL
8
D4
D3
D2
D1
18
19
20
21
22
23
24
25
+3.3V
NU1
DATA(0:15)
+3.3V
D0
37
47
12
37
1
2
3
4
5
6
10
11
14
7
8
9
16
17
18
19
15
20
21
22
23
24
26
28
30
32
40
42
44
46
27
29
31
33
41
43
45
47
39
36
35
34
38
13
25
48
DATA(0)
DATA(1)
DATA(2)
DATA(3)
DATA(4)
DATA(5)
DATA(6)
DATA(7)
DATA(8)
DATA(9)
DATA(10)
DATA(11)
DATA(12)
DATA(13)
DATA(14)
DATA(15)
VCC
VCC1
VCC2
NC1
NC2
NC3
NC4
NC5
NC6
NC7
NC8
NC9
R|B*
RE|
IO0
IO1
IO2
IO3
IO4
IO5
IO6
IO7
IO8
C212
C116
100nF
A0
R86
10K
_BYTE
100nF
C146
100nF
10
13
14
R96 R95
5.1K 1K
ADDR(22)
NC2
NC3
NC4
46
27
VSS1
VSS2
DGND
IO9
26
28
11
_CE
_OE
_WE _RESET
DGND
IO10
IO11
IO12
IO13
IO14
IO15
NC19
NC18
NC17
NC16
nCS_BOOT
nRD
NF_RnB
NF_nRE
NF_nCE
15
12
_BUSY
nWR
CE|
CLE
ALE
WE|
NF_CLE
NF_ALE
NF_nWE
NF_nWP
AM29LV160D
1107-001286
WP|
U13
NC10
NC11
NC12
NC13
NC14
NC15
9
16
17
48
1
2
3
4
5
45
43
41
39
36
34
32
30
44
42
40
38
35
33
31
29
DATA(31)
DATA(30)
DATA(29)
DATA(28)
DATA(27)
DATA(26)
DATA(25)
DATA(24)
DATA(23)
DATA(22)
DATA(21)
DATA(20)
DATA(19)
DATA(18)
DATA(17)
DATA(16)
ADDR(21)
ADDR(20)
ADDR(19)
ADDR(18)
ADDR(17)
ADDR(16)
ADDR(15)
ADDR(14)
ADDR(13)
ADDR(12)
ADDR(11)
ADDR(10)
ADDR(9)
ADDR(8)
ADDR(7)
ADDR(6)
ADDR(5)
ADDR(4)
ADDR(3)
ADDR(2)
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
C195
100pF
LOCKPRE
VSS3
VSS2
VSS1
K9F5616U0C
DGND
6
7
8
DGND
D4
D3
D2
D1
18
19
20
21
22
23
24
25
+3.3V
D0
37
47
VCC
A0
R106
10K
+3.3V
_BYTE
C202
100nF
RA14
10K
10
13
14
ADDR(22)
NC2
NC3
NC4
46
27
VSS1
VSS2
ADDR(22)
ADDR(21)
ADDR(20)
ADDR(23)
DGND
26
28
11
_CE
_OE _BUSY
_WE _RESET
15
12
DGND
AM29LV160D
R197
33
[ NAND SETTING ]
nRESET
D39
MMSD914T1
R201
100K
DGND
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
5/15
Flash Memory
8
1
2
3
4
5
6
7
Service Manual
11-5
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(6/15)
Schematic Diagram
1
2
3
4
5
6
7
8
Model
Configuration Size
SA(0:12)
A
A
SD(0:31)
128Mbit * 2
(1105-001357)
32MB
U6
U7
CLP-300
36
35
22
34
33
32
31
30
29
26
25
24
23
53
51
50
48
47
45
44
42
13
11
10
8
36
35
22
34
33
32
31
30
29
26
25
24
23
53
51
50
48
47
45
44
42
13
11
10
8
SA(12)
SA(11)
SA(10)
SA(9)
SA(8)
SA(7)
SA(6)
SA(5)
SA(4)
SA(3)
SA(2)
SA(1)
SA(0)
SD(15)
SD(14)
SD(13)
SD(12)
SD(11)
SD(10)
SD(9)
SD(8)
SD(7)
SD(6)
SD(5)
SD(4)
SD(3)
SD(2)
SD(1)
SD(0)
SA(12)
SA(11)
SA(10)
SA(9)
SA(8)
SA(7)
SA(6)
SA(5)
SA(4)
SA(3)
SA(2)
SA(1)
SA(0)
SD(31)
SD(30)
SD(29)
SD(28)
SD(27)
SD(26)
SD(25)
SD(24)
SD(23)
SD(22)
SD(21)
SD(20)
SD(19)
SD(18)
SD(17)
SD(16)
A12
DQ15
DQ14
DQ13
DQ12
DQ11
DQ10
DQ9
DQ8
DQ7
DQ6
DQ5
A12
DQ15
DQ14
DQ13
DQ12
DQ11
DQ10
DQ9
DQ8
DQ7
DQ6
DQ5
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
64MB
256Mbit * 2
(1105-001384)
CLP-300N
CLX-3160N
256Mbit * 4
CLX-3160FN (1105-001384)
128MB
Vb
Vb
DQ4
DQ3
DQ2
DQ1
DQ4
DQ3
DQ2
DQ1
7
5
4
2
7
5
4
2
B
B
C
D
E
F
40
40
NC/RFU
DQ0
NC/RFU
DQ0
18
17
18
17
*RAS
*CAS
*RAS
*CAS
nRAS
nCAS
nRAS
nCAS
1
1
VDD1
VDD2
VDD3
VDDQ1
VDDQ2
VDDQ3
VDDQ4
VDD1
VDD2
VDD3
VDDQ1
VDDQ2
VDDQ3
VDDQ4
14
27
3
9
43
49
14
27
3
9
43
49
20
21
20
21
BA0
BA1
BA0
BA1
BA0
BA1
BA0
BA1
19
16
19
16
*CS
*WE
*CS
*WE
nSCS0
nSDRAM_WR
nSCS0
nSDRAM_WR
15
39
28
41
54
6
12
46
52
15
39
28
41
54
6
12
46
52
LDQM
UDQM
VSS1
VSS2
VSS3
VSSQ1
VSSQ2
VSSQ3
VSSQ4
LDQM
UDQM
VSS1
VSS2
VSS3
VSSQ1
VSSQ2
VSSQ3
VSSQ4
DQM0
DQM1
DQM2
DQM3
R65
R64
0
0
38
37
38
37
C
D
E
F
CLK
CKE
CLK
CKE
SDCLK0
SD_CKE
SDCLK0
SD_CKE
K4S561632B-TC1L
1105-001384
K4S561632B-TC1L
DGND
DGND
U15
U16
36
35
22
34
33
32
31
30
29
26
25
24
23
53
51
50
48
47
45
44
42
13
11
10
8
36
35
22
34
33
32
31
30
29
26
25
24
23
53
51
50
48
47
45
44
42
13
11
10
8
SA(12)
SA(11)
SA(10)
SA(9)
SA(8)
SA(7)
SA(6)
SA(5)
SA(4)
SA(3)
SA(2)
SA(1)
SA(0)
SD(15)
SD(14)
SD(13)
SD(12)
SD(11)
SD(10)
SD(9)
SD(8)
SD(7)
SD(6)
SD(5)
SD(4)
SD(3)
SD(2)
SD(1)
SD(0)
SA(12)
SA(11)
SA(10)
SA(9)
SA(8)
SA(7)
SA(6)
SA(5)
SA(4)
SA(3)
SA(2)
SA(1)
SA(0)
SD(31)
SD(30)
SD(29)
SD(28)
SD(27)
SD(26)
SD(25)
SD(24)
SD(23)
SD(22)
SD(21)
SD(20)
SD(19)
SD(18)
SD(17)
SD(16)
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
DQ15
DQ14
DQ13
DQ12
DQ11
DQ10
DQ9
DQ8
DQ7
DQ6
DQ5
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
DQ15
DQ14
DQ13
DQ12
DQ11
DQ10
DQ9
DQ8
DQ7
DQ6
DQ5
A2
A1
A0
A2
A1
A0
+3.3V
DQ4
DQ3
DQ2
DQ1
DQ4
DQ3
DQ2
DQ1
7
5
4
2
+3.3V
7
5
4
2
40
40
NC/RFU
DQ0
NC/RFU
DQ0
18
17
18
17
*RAS
*CAS
*RAS
*CAS
nRAS
nCAS
nRAS
nCAS
1
1
VDD1
VDD2
VDD3
VDDQ1
VDDQ2
VDDQ3
VDDQ4
VDD1
VDD2
VDD3
VDDQ1
VDDQ2
VDDQ3
VDDQ4
14
27
3
9
43
49
14
27
3
9
43
49
20
21
20
21
BA0
BA1
BA0
BA1
BA0
BA1
BA0
BA1
19
16
19
16
*CS
*WE
*CS
*WE
nSCS1
nSDRAM_WR
nSCS1
nSDRAM_WR
15
39
28
41
54
6
12
46
52
15
39
28
41
54
6
12
46
52
LDQM
UDQM
VSS1
VSS2
VSS3
VSSQ1
VSSQ2
VSSQ3
VSSQ4
LDQM
UDQM
VSS1
VSS2
VSS3
VSSQ1
VSSQ2
VSSQ3
VSSQ4
DQM0
DQM1
DQM2
DQM3
R101
R100
0
0
38
37
38
37
CLK
CKE
CLK
CKE
SDCLK1
SD_CKE
SDCLK1
SD_CKE
K4S561632B-TC1L
K4S561632B-TC1L
DGND
DGND
Digtal Printing Division
Engineer K.C.LEE
Drawn by
R&D 5
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
6/15
SDRAM
8
1
2
3
4
5
6
7
Service Manual
11-6
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(7/15)
Schematic Diagram
1
2
3
4
5
6
7
8
USB_3.3VA USB_1V8
+3.3V
+3.3V
USB_3.3VA
+3.3V
L10
1uH
DATA(31:16)
LK16081ROK-T
ADDR(9:2)
A
A
B
C
D
E
C239
10uF
C238
C232
100nF
100nF
16V
C230
C224
C229
C213
C199
10nF
C217
10nF
18
19
20
22
23
24
25
27
ADDR(2)
ADDR(3)
ADDR(4)
ADDR(5)
ADDR(6)
ADDR(7)
ADDR(8)
ADDR(9)
2402-001049
A0
A1
A2
A3
A4
A5
A6
A7
100nF 100nF 100nF 10nF
30
31
32
33
35
36
37
38
39
40
42
43
44
45
46
47
DATA(16)
DATA(17)
DATA(18)
DATA(19)
DATA(20)
DATA(21)
DATA(22)
DATA(23)
DATA(24)
DATA(25)
DATA(26)
DATA(27)
DATA(28)
DATA(29)
DATA(30)
DATA(31)
DATA0
DATA1
DATA2
DATA3
DATA4
DATA5
DATA6
DATA7
DATA8
DATA9
DATA10
DATA11
DATA12
DATA13
DATA14
DATA15
USB_GND
DGND
DGND
USB_1V8
9
10
+3.3V
DREQ
DACK
nDREQ_USB_DEVICE
nDACK_USB_DEVICE
D19
KDS226
D20
KDS226
C236
15pF
XI_USB
7
8
RESET_N
EOT
nRST_USB_DEVICE
+3.3V
C203
47uF
16V
C198
C231
10nF
R108
1.5K
U18
isp1582bs
R98
10K
OSC6
2
1
2
1
100nF
11
12
ATS-49/U,12MHz,50ppm
DIOR
DIOW
B
C
D
E
F
3
3
2
3
4
DGND
RPU
DP
DM
C235
15pF
CN14-1
15
nCS
XO_USB
nCS_USB_DEVICE
787780-1
100
R111
16
17
nRD
nWR
L7 INSTPAR
nRD
49
6
R94
200K
1
DGND
VBUS
RREF
nWR
DGND
14
2
3
4
INT
nINT_USB_DEVICE
52
51
55
56
XTAL1
XTAL2
WAKEUP
SUSPEND
R102
XI_USB
L6 INSTPAR
XO_USB
12.1Kohm,1%
C205
CLX-3160N(FN) Only
R110 R114
R93
1M
10uF
C190
1000NF
10K
10K
16V
5
6
+3.3V
2402-001049
4
3
FGND
+5V +3.3V
DGND
USB_GND DGND
R36
10K
VCC OUT
R25
100
R23
10K
NOT USED
NR4 10K
U2
OSC1
NC GND
1
2
63
64
OSC2
60
CLKW
DGND
OSC1
SCO-10325AD-6M
DGND
46
38
42
41
VBUS
VBP
47
_RESET
nRST_USB_HOST
30
12
13
_CS
_WR
_RD
nCS_USB_HOST
2402-001049
VREG_OUT
VREG_EN
nWR
nRD
ADDR(2:13)
27
26
25
24
23
22
20
19
18
17
16
14
2
1
2
1
3
ADDR(13)
A12
A11
A10
A9
C59
10uF
16V
ADDR(12)
ADDR(11)
ADDR(10)
ADDR(9)
ADDR(8)
ADDR(7)
ADDR(6)
ADDR(5)
DGND
3
CN6-1
35303-0550
34
33
40
D1
D2
DM1
DP1
ID
KDS226 KDS226
A8
A7
1
2
3
4
5
A6
A5
DGND
R1
R6
33
33
32
31
A4
DM2
DP2
DATA(31:16)
ADDR(4)
A3
ADDR(3)
A2
ADDR(2)
A1
DATA(31)
9
39
36
L1
D15
D14
D13
D12
D11
D10
D9
_PO
_OC
DATA(30)
DATA(29)
DATA(28)
DATA(27)
DATA(26)
DATA(25)
DATA(24)
DATA(23)
DATA(22)
DATA(21)
DATA(20)
DATA(19)
DATA(18)
DATA(17)
DATA(16)
R2
4.7K
8
7
6
C60
10uF
16V
R7
C3
100nF
4
3
10
29
53
+3.3V
VDD2_5_10
VDD2_5_29
VDD2_5_53
10K
2
2402-001049
1
D8
59
58
57
56
52
51
50
49
D7
35
D6
VDD3_3_35
DGND
D5
5
21
55
D4
VDDW_5
VDDW_21
VDDW_55
D3
D2
D1
62
D0
AVDD2_5_62
43
45
AVDD3_3_43
AVDD3_3_45
+3.3V
15
28
54
VSS15
VSS28
VSS54
11
37
48
_INT
nINT_USB_HOST
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
R11 10K
_EXVBO
TEST
44
61
AVSS44
AVSS61
R10 10K
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
OTG242_LQFP64
0904-001865
DGND
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
DGND
DGND
MFG ENGR CHK
7/15
USB Host & Device Controller
1
2
3
4
5
6
7
8
B
1
B
Service Manual
11-7
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(8/15)
Schematic Diagram
1
2
3
4
5
6
7
8
Multi-Function pins
Pin
Function
Auto-Negotiation
mf0
mf1
mf2
mf3
mf4
Enable NRZ-NRZI conversion
4B/5B Codeing Enable
A
A
B
C
D
E
Scrambler Operation Disable
MF4 10/100 Mbps Speed Select
CLP-300N & CLX-3160N(FN) Only
Operating Configurations/ Auto-Negotiation Enabled
Input Value
Desired
Configuration
CFG0
CFG1
FDE
1
1
1
0
0
1
1
0
0
1
1
1
1
0
1
0
1
0
Advertise All
Advertise 100 HD
Advertise 100 HD/FD
Advertise 10 HD
B
R52
D9
200
MMSD914T1
LAN_LINK
Advertise 10 HD/FD
Advertise 10/100 HD
D11
MMSD914T1
+3.3V
R55
+3.3V
+3.3V
U8
RA36
XI_PCLK
XO_PCLK
nRST_NIC
+3.3V
10K
63mW
38
36
35
34
37
64
63
6
5
4
3
2
1
LEDR10
LEDL
LEDC
LEDS
LEDTR
CG0
CG1
FDE
MF0
MF1
MF2
MF3
MF4
10K
RA4
1/16W
CN11
33
MAC_CRS
MAC_COL
MAC_TX_EN
12
11
DGND
X1
X2
2
1
2
1
1
2
TDP
TCT
TDN
RDP
RCT
RDN
NC
D14
D16
C
28
61
29
RA37
RESET
MDINT
RIP
KDS2263 KDS2263
RA5
10K
33
63mW
60
59
3
1/16W
CRS
COL
DGND
MAC_TXD3
MAC_TXD2
MAC_TXD1
MAC_TXD0
R68
100
18
19
RXN
RXP
4
58
57
56
55
52
TX3
TX2
TX1
TX0
23
21
5
TXN
TXP
RA6
33
6
1/16W
MAC_RXD0
MAC_RXD1
MAC_RXD2
MAC_RXD3
C144 C153
10pF 10pF
TX_ER
9
13
16
17
22
7
VCCA1
VCCA2
VCCA3
VCCA4
VCCA5
54
53
51
49
48
TX_EN
8
TX_CLK
RX_ER
RX_CLK
RX_DV
CT_REF
RA35
9
33
3
3
FGND_9
1/16W
DGND
C130 C119
C113
7
10
14
20
24
+3.3V
D18
KDS226
10
11
12
13
14
GNDA1
GNDA2
GNDA3
GNDA4
GNDA5
MAC_RX_ERR
MAC_RX_DV
MAC_MDC
FGND_10
47
46
44
43
2
1
2
1
D17
KDS226
RXD0
RXD1
RXD2
RXD3
100nF 100nF
100nF
LED1_ANODE
LED1_CATHOD
LED2_ANODE
LED2_CATHOD
D
E
F
MAC_MDIO
DGND
42
41
39
45
62
MDC
MDIO
VCCE_I1
VCCE_I2
VCCE_I3
LAN_LINK
R61
R67
100
100
27
26
33
15
PWDDWN
TEST
TEST_SE
IREF
MAC_RX_CLK
MAC_TX_CLK
25
40
50
GNDE_I1
GNDE_I2
GNDE_I3
1605713-7
C90 C89
1nF 1nF
C102 C123
33pF 33pF
32
31
30
8
NC1
NC2
NC3
NC4
FGND
DGND
R73
5.1K
ste100p
DGND
RA3
RA38
DGND
10K
10K
63mW
63mW
3
2
R84 1K
1
Q8
MAC_LED_CON
MMBT2222ALT1
C168
10pF
DGND
XI_PCLK
R87
OSC4
100
R177
1M
(2804-004414)
U1F25000-35D16N
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
C167
10pF
XO_PCLK
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
DGND
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
Ethernet Physical Layer 8/15
1
2
3
4
5
6
7
8
Service Manual
11-8
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(9/15)
Schematic Diagram
1
2
3
4
5
6
7
8
+3.3V
+5V
CIP40 ONLY USED
U4
AFE_D(0:7)
NR115
0
CLX-3160N(FN) Only
7
8
9
10
11
12
13
14
5
VDDDR
18
R191
0
AFE_D(7)
AFE_D(6)
AFE_D(5)
AFE_D(4)
AFE_D(3)
AFE_D(2)
AFE_D(1)
AFE_D(0)
D7
D6
D5
D4
D3
D2
D1
D0
VDDA1
28
1
HT82v26 ONLY USED
A
A
B
C
VDDA2
+5V
+3.3V +24V
C27
C311
100nF
+24V INV_POWER
+3.3V +5V
100nF
20
REFB
21
1
2
3
4
16
17
CDS1_CLK
CDS2_CLK
ADCCLK
OEB
SCLK
SLOAD
REFT
23
SCANNER_PI_SH
AFE_CDS2_CLK
AFE_ADC_CLK
FPC_24
CN3-1
VCOM
25
OFFSET
4
C12 100nF
3
22
B_VIN
24
1
1
2
3
4
5
6
7
nADF_MOT_PHA
nADF_MOT_PHB
nADF_MOT_A
2
3
G_VIN
26
R8
33
U1-2
74LCX14
R_VIN
6
19
27
C13 100nF
C14 100nF
VSSDR
VSSA1
VSSA2
4
nADF_MOT_B
5
nADF_MOT_NA
nADF_MOT_NB
15
SDATA
6
C92
7
nADF_MODULE_DETECT
FLAT_MOT_PLS
nFLAT_MOT_EN
nFLAT_MOT_SLEEP
FLAT_MOT_DIR
DGND
100nF
8
HT82V26
C105
10uF 16V
DGND
9
B
C
D
E
F
AFE_SCLK
AFE_SLOAD
AFE_SDATA
10
11
12
13
14
15
8
SCANNER_DPI_CONTROL
SCANNER_BW_CONTROL
SCANNER_PI_TG1
FLAT_MOT_MS1
FLAT_MOT_MS2
FLAT_MOT_DAC
9
10
R4
33
CIP40
:
0ohm USED
16
17
R46
R53
HT82V26 1K USED
:
HT82V26 USED
+3.3V
CIP40 NOT USED
+3.3V
DGND
R29
10K
DGND
U3
1
2
3
4
5
6
7
8
16
DOUT1-
15
12
11
13
14
16
15
17
18
19
20
21
22
23
24
EN
DIN1
R48
R49
100
100
DOUT1+
14
SCANNER_PI_RS
SCANNER_PI1
DIN2
VCC
GND
DIN3
DIN4
EN_
DOUT2+
13
18
19
20
21
22
nADF_P_DET
nADF_P_REG
nADF_P_POS
DOUT2-
12
DOUT3-
11
100
100
R50
R51
DOUT3+
10
SCANNER_PI2
SCANNER_PI_CP
nFLAT_COVER_OPEN
nBIN_FULL
DOUT4+
9
DOUT4-
FIN1047M
23
24
C4
100nF
DGND
DGND
C1
C9
C54 C2
100nF
100nF100nF
50V
2203-005249
100nF
2203-005249|R1608_CAP
DGND
D
E
F
DGND
SRAM_A(0:15)
SRAM_D(0:15)
+24V
U23
1
2
3
4
7
8
9
SRAM_A(0)
SRAM_A(1)
SRAM_A(2)
SRAM_A(3)
SRAM_A(4)
SRAM_A(5)
SRAM_A(6)
SRAM_A(7)
SRAM_A(8)
SRAM_A(9)
SRAM_A(10)
SRAM_A(11)
SRAM_A(12)
SRAM_A(13)
SRAM_A(14)
SRAM_A(15)
SRAM_D(0)
SRAM_D(1)
SRAM_D(2)
SRAM_D(3)
SRAM_D(4)
SRAM_D(5)
SRAM_D(6)
SRAM_D(7)
SRAM_D(8)
SRAM_D(9)
SRAM_D(10)
SRAM_D(11)
SRAM_D(12)
SRAM_D(13)
SRAM_D(14)
SRAM_D(15)
A0
A1
A2
A3
A4
A5
A6
A7
I_01
I_02
I_O3
I_O4
I_O5
I_O6
I_O7
I_O8
I_O9
I_O10
I_O11
I_O12
I_O13
I_O14
I_O15
I_O16
R38
4.7K
10
13
14
15
16
29
30
31
32
35
36
37
38
S
3
5
NOT USED
Q2
18
19
20
21
24
25
26
27
42
43
44
G
1
NDT2955
+3.3V
INV_POWER
C35
100nF
A8
A9
D1
2
D2
4
DGND
A10
A11
A12
A13
A14
A15
NOT USED
NC1
U1-1
R200
33
R34
L4
DR
74LCX14
14
3
2
C50
6
4.7K
5
1
2
PWM_CCD_LAMP
D12
SS26
+3.3V
100uF
50V
100nF
U1-3
Q5
22
23
28
NC1
NC2
NC3
MMBT2222ALT1
7
U1-6
C67
1000nF
12
6
11
12
13
VCC1
VSS1
C291
100nF
C248
100nF
_CS
_WE
_LB
_UB
_OE
DGND
17
39
40
41
nSRAM_WR
34
33
VSS2
VCC2
DGND
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
K6R1016V1D
DGND
DGND
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
9/15
Scanner Interface
8
1
2
3
4
5
6
7
Service Manual
11-9
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(10/15)
Schematic Diagram
1
2
3
4
5
6
7
8
I2C Address Configuration
OPE2 : CLX-3160N(FN) Only
A
A
B
C
D
E
A2
0
A1
0
A0
0
I2C Address
Deve Y
+3.3V
CN12-1
+5V
35303-0750
R82
10K
R71
47K
0
0
0
1
1
0
Deve M
Deve C
1
2
3
4
5
6
7
NL2
NL3
NL1
B600
B600
B600
PANEL_RXD
nRST_PANEL
PANEL_TXD
nSCANNER_HOME
VBIN
0
1
1
0
1
0
Deve K
OPC
3301-001122
C120 C108 C152 C141
1nF 1nF 1nF 1nF
C132
100nF
B
1
1
0
1
1
0
Not Used
DGND
NPC & NVRAM
DGND
1
1
1
Not Used
FOR DEBUG
OPE1 : CLP-300(N) Only
+3.3V
+5V
DISPLAY_PANEL
CN27-1
35303-0450
U11_A-1
WSDIF-8T
+5V
CN13-1
C
D
E
F
DF11-14DP-2DSA
1
2
3
4
1
2
3
4
8
7
6
5
1
DEBUG_RXD
DEBUG_TXD
2
3
R75
100
+3.3V
4
OP_Y_LED
DGND
R78 100
R63 100
R69 100
R59 100
R60 100
R56 100
5
OP_M_LED
6
OP_C_LED
R92 R91
10K
C172
R79 R80
1K 1K
7
OP_K_LED
U11
100nF
10K
8
OP_STA_LED1
OP_STA_LED2
OP_MODE_LED
1
2
8
E0
VCC
*WC
SCL
SDA
7
6
5
9
E1
3
E2
VSS
SCL
SDA
10
4
+3.3V
C138 C137
15pF 15pF
M24C64
D15
KDS226
2
1
3
2
1
DGND
DGND
DGND
3
D13
KDS226
R192
47K
R62
R57
100
100
11
12
13
nOP_KEY_MODE
nOP_KEY_ONLINE
VBIN
14
C151
100nF
DGND
DGND
Engineer K.C.LEE
Digtal Printing Division
R&D 5
Drawn by
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
Hyper Terminal, EEPROM, OPE 10/15
1
2
3
4
5
6
7
8
Service Manual
11-10
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(11/15)
Schematic Diagram
1
2
3
4
5
6
7
8
A
B
C
D
E
F
A
B
C
D
+3.3V +5V
CN17-1
00-6232-030-807-800
DATA(31:24)
1
2
DATA(31)
3
DATA(30)
DATA(29)
DATA(28)
DATA(27)
DATA(26)
DATA(25)
DATA(24)
4
5
6
7
ADDR(2:8)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
ADDR(2)
ADDR(3)
ADDR(4)
ADDR(5)
ADDR(6)
ADDR(7)
ADDR(8)
nCS_MODEM
nRD
nWR
nRST_MODEM
nINT_MODEM
KEYCLICK
DGND
CLX-3160FN Only
E
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
F
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
SmartDAA Interface 11/15
1
2
3
4
5
6
7
8
Service Manual
11-11
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(12/15)
Schematic Diagram
1
2
3
4
5
6
7
8
+5V_LSU
C306
+5V_LSU
C266
LSU
A
B
C
D
E
F
A
B
C
D
E
10uF
16V
2402-001049
100nF
CN22-1
DF11-14DP-2DSA
R171
1K
R167
100
DGND
1
2
nHSYNC1
C284
10nF
+5V_LSU
+5V
C241
DGND
100nF
3
4
R158
10K
U22-1
DM7407MX
14
R168
100
DGND
DGND
2
1
nLD_EN
7
DGND
5
6
VDO1_minus
VDO1_plus
NC4
15pF
NC5
15pF
+5V_LSU
U22-2
NOT USED
R137
DM7407MX
DGND
10K
R143
100
7
8
4
3
LSU_SH1
R103
100
LD_POWER1
+5V
C209
10uF
16V
C223
100nF
R144
10K
U22-3
2402-001049
DM7407MX
R169
100
9
6
5
LSU_MOT_CLK
DGND
C285
1nF
+5V
+5V
2
1
R145
10K
DGND
D36
KDS226
R139
100
3
10
nLSU_READY
C260
10nF
DGND
R138
100
+3.3V
DGND
11
12
R118
5.1K
R117
100
nLSU_MOTOR_EN
8
9
DGND
+24V
DM7407MX
U22-4
C237
100nF
13
14
C233
47uF
50V
C300
DGND
100nF
50V
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
DGND
MFG ENGR CHK
LSU
8
12/15
1
2
3
4
5
6
7
Service Manual
11-12
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(13/15)
Schematic Diagram
1
2
3
4
5
6
7
8
A
A
B
C
D
E
+3.3V
+3.3V
+5V
FUSER_ON
DEVE_HOME
CN5-1
35303-0350
R5
150
R14
47K
R47
R24
20K
1%
2
1
4.7K
D10
MMSD914T1
U5-1
3
8
4
D6
KDS226
1
2
DGND
3
1
nDEV_HOME
R41
1K
2
R13
100
3
B
3
Q4
1
nFUSER_EN
C20
MMBT2222ALT1
LM393D
2
10nF
R44
+3.3V
+3.3V
4.7K
R18
R20
5.6K
DGND
DGND
15.4K,1%
FUSER THER.
DGND
R31
3K,1%
DGND
2
1
CN8-1
5045-02A
D4
KDS226
L2
3
INSTPAR
R19 33K
1
FUSER_THERM1
FUSER_THERM2
L3
R33
0
INSTPAR
3
2
C
2
1
C81
100nF
C21
10nF
R32
30K,1%
U5-2
5
6
3301-001122
Q1
C34
1nF
7
MMBT2222ALT1
LM393D
+3.3V
+5V
DGND
DGND
CN20-1
R163
150
R164
47K
DF11-6DP-2DSA
2
1
D32
KDS226
1
3
5
DGND
3
D
E
F
nP_EMPTY
R149
100
SCF
+24V +3.3V
+3.3V
C263
10nF
CN18-1
DF11-8DP-2DSA
D30
D26
D25
1
KDS226 KDS226 KDS226
2
3
4
5
6
7
8
1
2
1
2
1
2
R126
10K
R132
10K
DGND
3
3
3
+3.3V
R153 100
R127 100
+5V
SCF_RXD
SCF_TXD
R148
150
R165
47K
2
1
R155
1K
D33
KDS226
nSCF_RDY
DGND
3
2
4
6
C268 C246
1nF 1nF
C270
1nF
nREGI_SENS
C280 C279
100nF
R150
100
C264
10nF
100nF,50V
DGND
DGND
Engineer K.C.LEE
Drawn by
Digtal Printing Division
R&D 5
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
13/15
DEVE_HOME,SCF,FUSER THER
1
2
3
4
5
6
7
8
B
1
B
B
Service Manual
11-13
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(14/15)
Schematic Diagram
1
2
3
4
5
6
7
8
+24VF
DEV_SOL
+24VF
BLDC
CN4-1
ITB_CLUTCH
+24VF
+5V
+5V +3.3V
5045-02A
C19
CN10-1
DF11-10DP-2DSA
CN2-1
A
B
C
D
E
F
100nF
A
B
C
D
E
1
5045-03A
50V,10%
2203-005249
D8
M4
C43
100nF
50V,10%
2203-005249
1
2
1
2
DGND
D7
M4
Q7
2
MMBT2222ALT1
1
3
C11
2
1
RA2
3
2
R45
560
100nF
DGND
3
10K
DEV_CLUTCH
Q6
DGND
3
4
MMBT2222ALT1
R42
1.2K
3
D5
KDS226
1
5
ITB_CLUTCH
2
6
7
nBLDC_MOTOR_EN
BLDC_MOTOR_READY
PWM_MOT
R21 100
R22 100
8
DGND
+24VF
9
T2_CLUTCH
10
DGND
CN7-1
5045-03A
C5
100nF
50V,10%
1
2
3
2203-005249
D3
M4
DGND
Q3
MMBT2222ALT1
MMBT2222ALT1
Q14
R129
470
PTL
PTL
R39
1.2K
DGND
3
2
3
R130
1.2K
1
1
THV_CLUTCH
2
+24VF
DGND
DGND
+3.3V
+3.3V
+5V
R128
0
Q13
1
PTL_LAMP
REGI_CLUTCH
R140
1.2K
3
MMBT2222ALT1
ERASE_LAMP
C304
100nF
50V,10%
2203-005249
CN24-1
35303-0350
2
+3.3V
DEVE & ITB JOINT
CN19-1
DF11-12DP-2DSA
1
2
3
R125
3K
2
1
D34
M4
DGND
Q16
R160
4.7K
1%
D31
KDS226
3
2
1
2
1
D37
KDS226
1
3
2
4
DGND
DGND
MMBT2222ALT1 R166
3
3
3
2
1.2K
D38
KDS226
1
REGI_CLUTCH
R198
33
5
7
6
SCL
SDA
nITB_HOME
PTL_LAMP
R199
33
8
R122
10K
9
10
12
DGND
WASTE_LEVEL
WASTE_EMPTY
INNER_TEMP
+24VF
11
PICK UP
CN25-1
5045-02A
C305
100nF
50V,10%
2203-005249
1
D35
M4
DGND
Q10
MMBT2222ALT1
DGND
DGND
2
3
2
R119
560
1
PICKUP_CLUTCH
Digtal Printing Division
R&D 5
Engineer K.C.LEE
Drawn by
DGND
Size
F
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
A3
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
MFG ENGR CHK
BLDC, CLUTCH, DEVE & ITB JOINT 14/15
1
2
3
4
5
6
7
8
B
1
B
Service Manual
11-14
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Main Board(15/15)
Schematic Diagram
1
2
3
4
5
6
7
8
+24VF
HVPS
CN21-1
DF11-24DP-2DSA(20)
+5V
+24V
+24VA +24VF
1
2
3
4
A
B
C
D
E
F
A
B
C
D
SMPS
+5V
C294
CN15-1
100nF
DF11-16DP-2DSA
C251
100nF
2
1
3
U20-1
DM7407MX
FUSER_ON
14
DGND
DGND
4
5
2
1
nDEV_EN
6
5
7
8
7
10
12
14
16
9
U20-6
DGND
11
13
15
DM7407MX
13
6
7
12
10
8
PWM_DEV_VPP
PWM_DEV_AC
PWM_DEV_DC
PWM_ITHV
U20-2
DM7407MX
4
3
U20-5
DM7407MX
8
11
9
C185
100nF
C196
U20-3
DM7407MX
6
C166
100nF
C171
100uF
16V
100nF C240
100uF
C208
100uF
50V
9
5
50V
U20-4
DM7407MX
10
11
12
PWM_THV
2401-000042
2401-000207
2401-000207
U22-5
DM7407MX
10
11
PWM_MHV
DGND
U22-6
DM7407MX
12
13
nTHV_EN
+5V_LSU
+24VA +24VF
N.C
CN16-1
5096-02C
CN26-1
35303-0250
DGND
R134
R159
R124
10K
10K
10K
13
14
15
ITHV_READ
THV_READ
MHV_READ
1
2
1
2
C242 C297 C274
10nF 10nF 10nF
+3.3V
+24V_COVER SWITCH
+5V_COVER SWITCH
DGND
2
1
R180
47K
D24
KDS226
DGND
3
16
nP_EXIT
R146
100
+24VF
R179
C293
+3.3V
+24VF
300
C258
10nF
+5V
nCOVER_OPEN
100nF 2203-005249
DGND
+5V
R116
3K,1%
R188
4.7K
D28
M4
DGND
Q15
2
1
R187
560
17
18
19
20
21
22
23
24
R99
2
MMBT2222ALT1
22K
1
3
R123
1.2K
R178
6.2K
3
D21
1
3
2
DEV_SOL1
DEV_SOL2
DEV_SOL3
DEV_SOL4
OUT_TEMP
FAN_MAIN
KDS226
3
1
E
2
Q19
MMBT2907A
Q18
MMBT2222ALT1
R104
5.1K
C225
100nF
R135
10K
Q17
DGND
3
MMBT2222ALT1
DGND
R136 1.2K
1
WASTE_LED
2
Digtal Printing Division
R&D 5
Engineer K.C.LEE
Drawn by
Size
A3
TITLE:
R&D CHK S.D.AN
DOC CTRL CHK
F
DGND
CLP-300(N)/CLX-3160N(FN)
Main_V0.11
DGND
MFG ENGR CHK
15/15
HVPS, SMPS, COVER_OPEN
8
1
2
3
4
5
6
7
Service Manual
11-15
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.2 Panel
Schematic Diagram
MAIN PANEL
Service Manual
11-16
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.3 DEVE INF
Schematic Diagram
FROM MAIN BOARD
WASTE LEVEL
R7
15K
CN3-1
35303-0350
1
2
3
DGN D
DGN D
DEVE CRUM
WASTE EMPTY
DGN D
Y
M
1
C
0
K DEVE
0
0
0
1
1
0
0
A0
A1
A2
0
0
1
0
DGN D
0
1
DGN D
TONER_CRUM_CONTACT_Y
TONER_CRUM_CONTACT_M
TONER_CRUM_CONTACT_C
TONER_CRUM_CONTACT_K
DGN D
DGN D
DGN D
DGN D
DGN D
DGN D
DGN D
DGN D
Service Manual
11-17
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.4 ITB INF
Schematic Diagram
PTL
ITB_HOME
FROM_DRAW_CON
Service Manual
11-18
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.5 SMPS-110V
Schematic Diagram
1
2
3
4
8
R04
1K_2012
C05
104K_2012
T1
D
D
C
B
R010
1W22(mini)
D01
1KV1A-CHIP
Q01
600V12A
AR03
1KV
C72
1KV103K
AR04
600V
L01
F01
250V8A
LF01
DV508080S
D103
F02
250V5A
TH01
10D9
R01
R02
R03
C02
AD102
C18
AD102
35V1000uFX2
TNR01
14D221
CON1
R11
R14
R15
CON3-3,5,7,9
24V 4.4A
C01
224
LF002
CV930160
C04
104
ZD71
20V-CHIP
D105
200V20AX2
C12
630V333K
BD01
600V6A
C03
AD102
R12
R13
Q11
600V4A
R77
3W120
R75
200_2012
C11
200V680uF
R17
100_2012
200K_3216X3
C71
C75
AR01
600V
C78
50V104(mono)
C77
35V470uF
Q71
2222A-CHIP
R16
AR02
1KV
ZD12
20V-CHIP
C
B
A
R76
470_2012
L51
CON2-2
CON2-1
C51
630V333k
R51
1W50m
R52
R53
CON3-4,6,8,10
GND
91JX2_2012
C73
1KV103K
Q51
600V16A
L71
5uH
F71
R91
220_2012
250V5A
CON3-11,13,15
5V 3A
PC51
TLP3061F
D12
MMSD4148
R54
1W50m
U11
IC_1207A-CHIP
OUT
D104
60V20A
R18
10_2012
0
0
R92
1K_2012
R93
1KF_2012
5
7
3
8
6
1
VI
VCC
R59
100_2012
C52
104K_2012
PC11-2
817B
R55
1/2W180(MINI)
R19
100_2012
D11
1KV1A-CHIP
Q12
500V21A
R20
10K_2012
NC
R23
47_3216
C91
225_2012
C74
16V1000uF
C76
16V1000uF
CS
DEMAG
R24
100K_2012
R56
1W1.5KJ(mini)
R21
100_2012
U91
431-CHIP
R94
1KF_2012
PC11-1
817B
CON3-1
24VS
C14
C15
R57
1K_2012
CON3-12,14,16
GND
R22
5W0.13
C16
20p_2012
Q52
2222A-CHIP
CON3-2
Fuser Count
C13
1n_2012
R58
4.7K_2012
ZD11
20V-CHIP
C17
AD102
TNR11
7D221
HEATSINK
A
note1
Title
note2
note3
note4
note5
Top Circuit
Size
A3
File C:\...\
No.
.docno.
Rev.
.rev.
\TYPE III-V1_050602.sch
Date 2005/06/02 Time 19:44
1
of
1
1
2
3
4
Service Manual
11-19
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.6 SMPS-220V
Schematic Diagram
1
2
3
4
8
R04
1K_2012
C05
104K_2012
T1
D
D
R010
1W22(mini)
D01
1KV1A-CHIP
Q01
600V12A
AR03
1KV
C72
1KV103K
AR04
600V
L01
F01
250V8A
LF01
CV505110B
D103
F02
250V5A
TH01
10D9
R01
R02
R03
C02
AD102
C18
AD102
35V1000uFX2
TNR01
10D561
CON1
R11
R14
R15
CON3-3,5,7,9
24V 4.4A
C01
224
LF002
CV930160P
C04
104
ZD71
20V-CHIP
D105
200V20AX2
C12
630V333K
BD01
600V6A
C03
AD102
R12
R13
Q11
600V4A
R77
3W120
R75
200_2012
C11
450V220uF
R17
100_2012
200K_3216X3
C71
C75
AR01
600V
C78
50V104(mono)
C77
35V470uF
Q71
2222A-CHIP
R16
AR02
1KV
ZD12
20V-CHIP
C
B
A
C
B
A
R76
470_2012
L51
CON2-2
CON2-1
C51
630V333k
R51
1W50m
R52
R53
CON3-4,6,8,10
GND
91JX2_2012
C73
1KV103K
Q51
600V16A
L71
5uH
F71
250V5A
R91
220_2012
PC51
TLP3061F
CON3-11,13,15
5V 3A
D12
MMSD4148
R54
1W50m
U11
IC_1207A-CHIP
OUT
D104
60V20A
R18
10_2012
0
0
R92
1K_2012
R93
1KF_2012
5
7
3
8
6
1
VI
VCC
R59
22_2012
C52
104K_2012
PC11-2
817B
R55
1/2W180(MINI)
R19
100_2012
D11
1KV1A-CHIP
Q12
600V11A
R20
10K_2012
NC
R23
47_3216
C91
225_2012
C74
16V1000uF
C76
16V1000uF
CS
DEMAG
R24
100K_2012
R56
1W1.5KJ(mini)
R21
100_2012
U91
431-CHIP
R94
1KF_2012
PC11-1
817B
CON3-1
24VS
C14
C15
R57
1K_2012
CON3-2
Fuser Count
R58
4.7K_2012
CON3-12,14,16
GND
R22
5W0.25
C16
20p_2012
Q52
2222A-CHIP
C13
1n_2012
ZD11
20V-CHIP
C17
AD102
TNR11
7D221
HEATSINK
note1
Title
note2
note3
note4
note5
Top Circuit
Size
A3
File C:\...\
No.
.docno.
\TYPE III-V2_050602.sch
Rev.
.rev.
Date 2005/06/02 Time 19:47
1
of
1
1
2
3
4
Service Manual
11-20
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11.7 HVPS (1/5)
Schematic Diagram
Service Manual
11-21
Samsung Electronics
This Document can not be used without Samsung’s authorization.
HVPS (2/5)
Schematic Diagram
Service Manual
11-22
Samsung Electronics
This Document can not be used without Samsung’s authorization.
HVPS (3/5)
Schematic Diagram
Service Manual
11-23
Samsung Electronics
This Document can not be used without Samsung’s authorization.
HVPS (4/5)
Schematic Diagram
Service Manual
11-24
Samsung Electronics
This Document can not be used without Samsung’s authorization.
HVPS (5/5)
Schematic Diagram
Service Manual
11-25
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Reference Information
12. Reference Information
This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the
location space required when installing the printer. A definition of tests pages and Wireless
12
Network information definition is also included.
12.1 Tools for Troubleshooting
The following tools are recommended safe and easy troubleshooting as described in this service manual.
•
DVM(Digital Volt Meter)
• Cleaning Equipments
Standard : Indicates more than 3 digits.
Standard : An IPA(Isopropyl Alcohol)dry wipe tissue or a
gentle neutral detergent and lint-free cloth.
• Driver
• Vacuum Cleaner
Standard : "-" type, "+" type (M3 long, M3 short, M2
long, M2 short).
• Brush
• Tweezers
Standard : For general home use, small type.
• Cotton Swab
Standard : For general home use, for medical service.
• Software (Driver) installation CD ROM
Install Driver CD
Network S/W CD
Service Manual
12-1
Samsung Electronics
Reference Information
12.2 Acronyms and Abbreviations
The table below explains the abbreviations and acronyms used in this service manual. Where abbreviations
or acronyms are used in the text please refer to this table.
ADC
AP
Analog-to-Digital-Conversion
Access Point
EPP
Enhanced Parallel Port
Firmware
F/W
AC
Alternating Current
FCF/FCT
First Cassette Feeder/First
Cassette Tray
ASIC
Application Specific Integrated
Circuit
FISO
FPOT
GDI
GIF
Front-In, Side-Out
First Print out Time
Windows Graphic Device Interface
Graphic Interchange Format
Ground
ASSY
Assembly
BIOS
Basic Input Output System
Brushless DC Motor
Color Laser Beam Printer
BLDC Motor
CLBP
GND
HBP
HDD
HTML
HV
CMOS
Complementary Metal Oxide
Semiconductor
Host Based Printing
Hard Disk Drive
CMYK
CN
Cyan, Magenta, Yellow, Black
Connector
Hyper Text Transfer Protocol
High Voltage
CON
CPU
Connector
HVPS
I/F
High Voltage Power Supply
Interface
Central Processing Unit
Color Toner Density Sensor
Decibel
CTD Sensor
dB
I/O
Input and Output
lb
Pound(s)
dBA
A-Weighted decibel
Decibel milliwatt
IC
Integrated Circuit
dBm
ICC
IDE
International Color Consortium
DC
Direct Current
Intelligent Drive Electronics or
Integrated Drive Electronics
DCU
Diagnostic Control Unit
Dual In-line Memory Module
Dot Per Inch
DIMM
DPI
IEEE
IOT
Institute of Electrical and
Electronics Engineers. Inc
Image Output Terminal (Color print-
er, Copier)
DRAM
DVM
ECP
Dynamic Random Access Memory
Digital Voltmeter
IPA
IPC
Isopropy Alcohol
Enhanced Capability Port
Engine Control Unit
Inter Process CommunicationEPP
Enhanced parallel Port
ECU
IPM
ITB
Images Per Minute
Image Transfer Belt
local area network
Laser Beam Printer
EEPROM
Electronically Erasable
Programmable Read Only Memory
EMI
EP
Electro Magnetic Interference
Electro photographic
LAN
LBP
Service Manual
12-2
Samsung Electronics
Reference Information
LCD
Liquid Crystal Display
Light Emitting Diode
Laser Scanning Unit
Megabyte
PTB
Paper-Transfer Belt
LED
PWM
Q’ty
Pulse Width Moduration
Quantity
LSU
MB
RAM
RCP
Random Access Memory
Remote Control Panel
Read Only Memory
MHz
Megahertz
MPBF
MPF/MPT
Mean Prints Between Failure
ROM
SCF/SCT
Multi Purpose Feeder/Multi
Purpose Tray
Second Cassette Feeder/Second
Cassette Tray
NIC
Network Interface Card
Network Printer Card
SMPS
SPGP
Switching Mode Power Supply
NPC
Samsung Printer Graphic
Processor
NVRAM
Nonvolatile Random Access
Memory
SPL
Samsung Printer Language
OPC
PBA
PCL
Organic Photo Conductor
Printed Board Assembly
SPL-C
Spool
Samsung Printer Language-Color
Simultaneous Peripheral Operation
Online
Printer Command Language ,
Printer Control Language
SRS
SURF
SW
Software Requirment Specification
Surface Rapid Fusing
Switch
PCI
Peripheral Component
Interconnect by Intel 1992/6/22, is
a local bus standard developed by
Intel and introduced in April, 1993 :
A60, B60 Pins
sync
T1
Synchronous or Synchronization
ITB
PCL5Ce
Printer Command Language 5Ce-
Color
T2
Transfer Roller
PCL6
PDF
PDL
Ping
Printer Command Language 6
Portable Document Format
Page Description Language
TRC
PnP
U.I.
Toner Reproduction Curve
Universal Plug and Play
User Interface
Packet internet or Inter-Network
Groper
URL
USB
VCCI
Uniform Resource Locator
Universal Serial Bus
PPD
PPM
PS
Postscript Printer Discription
Page Per Minute
Post Script
Voluntary Control Council for
Interference Information
Technology Equipment
WECA
Alliance
Wireless Ethernet Compatibility
PS3
PTL
Post Script Level3
Pre-Transfer Lamp
Wi-Fi
Wireless Fidelity
Service Manual
12-3
Samsung Electronics
Reference Information
12.3 Select a location for the printer
• Leave enough room to open the printer trays, covers, and allow for proper ventilation. (see diagram
below)
• Provide the proper environment :
- A firm, level surface
- Away from the direct airflow of air conditioners, heaters, or ventilators
- Free of extreme fluctuations of temperature, sunlight, or humidity
- Clean, dry, and free of dust
Service Manual
12-4
Samsung Electronics
Reference Information
12.4 A4 ISO 19752 Standard Pattern
This test page is reproduced at 70% of the normal A4 size
Service Manual
12-5
Samsung Electronics
|